1 /* 2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB 3 video capture devices 4 5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> 6 Markus Rechberger <mrechberger@gmail.com> 7 Mauro Carvalho Chehab <mchehab@infradead.org> 8 Sascha Sommer <saschasommer@freenet.de> 9 Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com> 10 11 This program is free software; you can redistribute it and/or modify 12 it under the terms of the GNU General Public License as published by 13 the Free Software Foundation; either version 2 of the License, or 14 (at your option) any later version. 15 16 This program is distributed in the hope that it will be useful, 17 but WITHOUT ANY WARRANTY; without even the implied warranty of 18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 GNU General Public License for more details. 20 21 You should have received a copy of the GNU General Public License 22 along with this program; if not, write to the Free Software 23 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 24 */ 25 26 #include <linux/init.h> 27 #include <linux/module.h> 28 #include <linux/slab.h> 29 #include <linux/delay.h> 30 #include <linux/i2c.h> 31 #include <linux/usb.h> 32 #include <media/tuner.h> 33 #include <media/msp3400.h> 34 #include <media/saa7115.h> 35 #include <media/tvp5150.h> 36 #include <media/tvaudio.h> 37 #include <media/i2c-addr.h> 38 #include <media/tveeprom.h> 39 #include <media/v4l2-common.h> 40 41 #include "em28xx.h" 42 43 #define DRIVER_NAME "em28xx" 44 45 static int tuner = -1; 46 module_param(tuner, int, 0444); 47 MODULE_PARM_DESC(tuner, "tuner type"); 48 49 static unsigned int disable_ir; 50 module_param(disable_ir, int, 0444); 51 MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); 52 53 static unsigned int disable_usb_speed_check; 54 module_param(disable_usb_speed_check, int, 0444); 55 MODULE_PARM_DESC(disable_usb_speed_check, 56 "override min bandwidth requirement of 480M bps"); 57 58 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U }; 59 module_param_array(card, int, NULL, 0444); 60 MODULE_PARM_DESC(card, "card type"); 61 62 static int usb_xfer_mode = -1; 63 module_param(usb_xfer_mode, int, 0444); 64 MODULE_PARM_DESC(usb_xfer_mode, 65 "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)"); 66 67 68 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */ 69 static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS); 70 71 struct em28xx_hash_table { 72 unsigned long hash; 73 unsigned int model; 74 unsigned int tuner; 75 }; 76 77 static void em28xx_pre_card_setup(struct em28xx *dev); 78 79 /* 80 * Reset sequences for analog/digital modes 81 */ 82 83 /* Reset for the most [analog] boards */ 84 static struct em28xx_reg_seq default_analog[] = { 85 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 86 { -1, -1, -1, -1}, 87 }; 88 89 /* Reset for the most [digital] boards */ 90 static struct em28xx_reg_seq default_digital[] = { 91 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 92 { -1, -1, -1, -1}, 93 }; 94 95 /* Board Hauppauge WinTV HVR 900 analog */ 96 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { 97 {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10}, 98 { 0x05, 0xff, 0x10, 10}, 99 { -1, -1, -1, -1}, 100 }; 101 102 /* Board Hauppauge WinTV HVR 900 digital */ 103 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { 104 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 105 {EM2880_R04_GPO, 0x04, 0x0f, 10}, 106 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 107 { -1, -1, -1, -1}, 108 }; 109 110 /* Board Hauppauge WinTV HVR 900 (R2) digital */ 111 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = { 112 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 113 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 114 { -1, -1, -1, -1}, 115 }; 116 117 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 118 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { 119 {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10}, 120 { -1, -1, -1, -1}, 121 }; 122 123 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 124 125 /* Board - EM2870 Kworld 355u 126 Analog - No input analog */ 127 128 /* Board - EM2882 Kworld 315U digital */ 129 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = { 130 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 131 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 132 {EM2880_R04_GPO, 0x04, 0xff, 10}, 133 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 134 {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10}, 135 { -1, -1, -1, -1}, 136 }; 137 138 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { 139 {EM2880_R04_GPO, 0x08, 0xff, 10}, 140 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 141 {EM2880_R04_GPO, 0x08, 0xff, 10}, 142 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 143 { -1, -1, -1, -1}, 144 }; 145 146 static struct em28xx_reg_seq kworld_330u_analog[] = { 147 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 148 {EM2880_R04_GPO, 0x00, 0xff, 10}, 149 { -1, -1, -1, -1}, 150 }; 151 152 static struct em28xx_reg_seq kworld_330u_digital[] = { 153 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 154 {EM2880_R04_GPO, 0x08, 0xff, 10}, 155 { -1, -1, -1, -1}, 156 }; 157 158 /* Evga inDtube 159 GPIO0 - Enable digital power (s5h1409) - low to enable 160 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable 161 GPIO4 - xc3028 reset 162 GOP3 - s5h1409 reset 163 */ 164 static struct em28xx_reg_seq evga_indtube_analog[] = { 165 {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60}, 166 { -1, -1, -1, -1}, 167 }; 168 169 static struct em28xx_reg_seq evga_indtube_digital[] = { 170 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1}, 171 {EM2880_R04_GPO, 0x04, 0xff, 10}, 172 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 173 { -1, -1, -1, -1}, 174 }; 175 176 /* 177 * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map: 178 * EM_GPIO_0 - currently unknown 179 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on) 180 * EM_GPIO_2 - currently unknown 181 * EM_GPIO_3 - currently unknown 182 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset) 183 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset) 184 * EM_GPIO_6 - currently unknown 185 * EM_GPIO_7 - currently unknown 186 */ 187 static struct em28xx_reg_seq kworld_a340_digital[] = { 188 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 189 { -1, -1, -1, -1}, 190 }; 191 192 static struct em28xx_reg_seq kworld_ub435q_v3_digital[] = { 193 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 194 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, 195 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100}, 196 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, 197 { -1, -1, -1, -1}, 198 }; 199 200 /* Pinnacle Hybrid Pro eb1a:2881 */ 201 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { 202 {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10}, 203 { -1, -1, -1, -1}, 204 }; 205 206 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { 207 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 208 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ 209 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 210 { -1, -1, -1, -1}, 211 }; 212 213 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = { 214 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 215 {EM2880_R04_GPO, 0x00, 0xff, 10}, 216 { -1, -1, -1, -1}, 217 }; 218 219 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = { 220 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 221 {EM2880_R04_GPO, 0x08, 0xff, 10}, 222 { -1, -1, -1, -1}, 223 }; 224 225 /* PCTV HD Mini (80e) GPIOs 226 0-5: not used 227 6: demod reset, active low 228 7: LED on, active high */ 229 static struct em28xx_reg_seq em2874_pctv_80e_digital[] = { 230 {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/ 231 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/ 232 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 10}, 233 { -1, -1, -1, -1}, 234 }; 235 236 /* eb1a:2868 Reddo DVB-C USB TV Box 237 GPIO4 - CU1216L NIM 238 Other GPIOs seems to be don't care. */ 239 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = { 240 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 241 {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10}, 242 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 243 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 244 {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10}, 245 {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10}, 246 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 247 { -1, -1, -1, -1}, 248 }; 249 250 /* Callback for the most boards */ 251 static struct em28xx_reg_seq default_tuner_gpio[] = { 252 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 253 {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10}, 254 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 255 { -1, -1, -1, -1}, 256 }; 257 258 /* Mute/unmute */ 259 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = { 260 {EM2820_R08_GPIO_CTRL, 5, 7, 10}, 261 { -1, -1, -1, -1}, 262 }; 263 264 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = { 265 {EM2820_R08_GPIO_CTRL, 4, 7, 10}, 266 { -1, -1, -1, -1}, 267 }; 268 269 static struct em28xx_reg_seq compro_mute_gpio[] = { 270 {EM2820_R08_GPIO_CTRL, 6, 7, 10}, 271 { -1, -1, -1, -1}, 272 }; 273 274 /* Terratec AV350 */ 275 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = { 276 {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10}, 277 { -1, -1, -1, -1}, 278 }; 279 280 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { 281 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 282 { -1, -1, -1, -1}, 283 }; 284 285 static struct em28xx_reg_seq silvercrest_reg_seq[] = { 286 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 287 {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10}, 288 { -1, -1, -1, -1}, 289 }; 290 291 static struct em28xx_reg_seq vc211a_enable[] = { 292 {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10}, 293 {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10}, 294 {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10}, 295 { -1, -1, -1, -1}, 296 }; 297 298 static struct em28xx_reg_seq dikom_dk300_digital[] = { 299 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 300 {EM2880_R04_GPO, 0x08, 0xff, 10}, 301 { -1, -1, -1, -1}, 302 }; 303 304 305 /* Reset for the most [digital] boards */ 306 static struct em28xx_reg_seq leadership_digital[] = { 307 {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10}, 308 { -1, -1, -1, -1}, 309 }; 310 311 static struct em28xx_reg_seq leadership_reset[] = { 312 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 313 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10}, 314 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 315 { -1, -1, -1, -1}, 316 }; 317 318 /* 2013:024f PCTV nanoStick T2 290e 319 * GPIO_6 - demod reset 320 * GPIO_7 - LED 321 */ 322 static struct em28xx_reg_seq pctv_290e[] = { 323 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80}, 324 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ 325 {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ 326 { -1, -1, -1, -1}, 327 }; 328 329 #if 0 330 static struct em28xx_reg_seq terratec_h5_gpio[] = { 331 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 332 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, 333 {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, 334 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50}, 335 { -1, -1, -1, -1}, 336 }; 337 338 static struct em28xx_reg_seq terratec_h5_digital[] = { 339 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 340 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 341 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 342 { -1, -1, -1, -1}, 343 }; 344 #endif 345 346 /* 2013:024f PCTV DVB-S2 Stick 460e 347 * GPIO_0 - POWER_ON 348 * GPIO_1 - BOOST 349 * GPIO_2 - VUV_LNB (red LED) 350 * GPIO_3 - EXT_12V 351 * GPIO_4 - INT_DEM (DEMOD GPIO_0) 352 * GPIO_5 - INT_LNB 353 * GPIO_6 - RESET_DEM 354 * GPIO_7 - LED (green LED) 355 */ 356 static struct em28xx_reg_seq pctv_460e[] = { 357 {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50}, 358 { 0x0d, 0xff, 0xff, 50}, 359 {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */ 360 { 0x0d, 0x42, 0xff, 50}, 361 {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */ 362 { -1, -1, -1, -1}, 363 }; 364 365 static struct em28xx_reg_seq c3tech_digital_duo_digital[] = { 366 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 367 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */ 368 {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35}, 369 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, 370 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 371 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10}, 372 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10}, 373 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20}, 374 { -1, -1, -1, -1}, 375 }; 376 377 /* 378 * 2013:0258 PCTV DVB-S2 Stick (461e) 379 * GPIO 0 = POWER_ON 380 * GPIO 1 = BOOST 381 * GPIO 2 = VUV_LNB (red LED) 382 * GPIO 3 = #EXT_12V 383 * GPIO 4 = INT_DEM 384 * GPIO 5 = INT_LNB 385 * GPIO 6 = #RESET_DEM 386 * GPIO 7 = P07_LED (green LED) 387 */ 388 static struct em28xx_reg_seq pctv_461e[] = { 389 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0}, 390 {0x0d, 0xff, 0xff, 0}, 391 {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */ 392 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */ 393 {0x0d, 0x42, 0xff, 0}, 394 {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0}, 395 {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */ 396 { -1, -1, -1, -1}, 397 }; 398 399 #if 0 400 static struct em28xx_reg_seq hauppauge_930c_gpio[] = { 401 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 402 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */ 403 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 404 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, 405 { -1, -1, -1, -1}, 406 }; 407 408 static struct em28xx_reg_seq hauppauge_930c_digital[] = { 409 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 410 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 411 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 412 { -1, -1, -1, -1}, 413 }; 414 #endif 415 416 /* 1b80:e425 MaxMedia UB425-TC 417 * 1b80:e1cc Delock 61959 418 * GPIO_6 - demod reset, 0=active 419 * GPIO_7 - LED, 0=active 420 */ 421 static struct em28xx_reg_seq maxmedia_ub425_tc[] = { 422 {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100}, 423 {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ 424 {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ 425 { -1, -1, -1, -1}, 426 }; 427 428 /* 2304:0242 PCTV QuatroStick (510e) 429 * GPIO_2: decoder reset, 0=active 430 * GPIO_4: decoder suspend, 0=active 431 * GPIO_6: demod reset, 0=active 432 * GPIO_7: LED, 1=active 433 */ 434 static struct em28xx_reg_seq pctv_510e[] = { 435 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 436 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 437 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 438 { -1, -1, -1, -1}, 439 }; 440 441 /* 2013:0251 PCTV QuatroStick nano (520e) 442 * GPIO_2: decoder reset, 0=active 443 * GPIO_4: decoder suspend, 0=active 444 * GPIO_6: demod reset, 0=active 445 * GPIO_7: LED, 1=active 446 */ 447 static struct em28xx_reg_seq pctv_520e[] = { 448 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 449 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 450 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 451 {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ 452 { -1, -1, -1, -1}, 453 }; 454 455 /* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 456 * reg 0x80/0x84: 457 * GPIO_0: capturing LED, 0=on, 1=off 458 * GPIO_2: AV mute button, 0=pressed, 1=unpressed 459 * GPIO 3: illumination button, 0=pressed, 1=unpressed 460 * GPIO_6: illumination/flash LED, 0=on, 1=off 461 * reg 0x81/0x85: 462 * GPIO_7: snapshot button, 0=pressed, 1=unpressed 463 */ 464 static struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = { 465 {EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10}, 466 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10}, 467 { -1, -1, -1, -1}, 468 }; 469 470 static struct em28xx_reg_seq pctv_292e[] = { 471 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 472 {0x0d, 0xff, 0xff, 950}, 473 {EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100}, 474 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 410}, 475 {EM2874_R80_GPIO_P0_CTRL, 0x7d, 0xff, 300}, 476 {EM2874_R80_GPIO_P0_CTRL, 0x7c, 0xff, 60}, 477 {0x0d, 0x42, 0xff, 50}, 478 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, 479 {-1, -1, -1, -1}, 480 }; 481 482 /* 483 * Button definitions 484 */ 485 static struct em28xx_button std_snapshot_button[] = { 486 { 487 .role = EM28XX_BUTTON_SNAPSHOT, 488 .reg_r = EM28XX_R0C_USBSUSP, 489 .reg_clearing = EM28XX_R0C_USBSUSP, 490 .mask = EM28XX_R0C_USBSUSP_SNAPSHOT, 491 .inverted = 0, 492 }, 493 {-1, 0, 0, 0, 0}, 494 }; 495 496 static struct em28xx_button speedlink_vad_laplace_buttons[] = { 497 { 498 .role = EM28XX_BUTTON_SNAPSHOT, 499 .reg_r = EM2874_R85_GPIO_P1_STATE, 500 .mask = 0x80, 501 .inverted = 1, 502 }, 503 { 504 .role = EM28XX_BUTTON_ILLUMINATION, 505 .reg_r = EM2874_R84_GPIO_P0_STATE, 506 .mask = 0x08, 507 .inverted = 1, 508 }, 509 {-1, 0, 0, 0, 0}, 510 }; 511 512 /* 513 * LED definitions 514 */ 515 static struct em28xx_led speedlink_vad_laplace_leds[] = { 516 { 517 .role = EM28XX_LED_ANALOG_CAPTURING, 518 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 519 .gpio_mask = 0x01, 520 .inverted = 1, 521 }, 522 { 523 .role = EM28XX_LED_ILLUMINATION, 524 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 525 .gpio_mask = 0x40, 526 .inverted = 1, 527 }, 528 {-1, 0, 0, 0}, 529 }; 530 531 static struct em28xx_led kworld_ub435q_v3_leds[] = { 532 { 533 .role = EM28XX_LED_DIGITAL_CAPTURING, 534 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 535 .gpio_mask = 0x80, 536 .inverted = 1, 537 }, 538 {-1, 0, 0, 0}, 539 }; 540 541 static struct em28xx_led pctv_80e_leds[] = { 542 { 543 .role = EM28XX_LED_DIGITAL_CAPTURING, 544 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 545 .gpio_mask = 0x80, 546 .inverted = 0, 547 }, 548 {-1, 0, 0, 0}, 549 }; 550 551 552 /* 553 * Board definitions 554 */ 555 struct em28xx_board em28xx_boards[] = { 556 [EM2750_BOARD_UNKNOWN] = { 557 .name = "EM2710/EM2750/EM2751 webcam grabber", 558 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, 559 .tuner_type = TUNER_ABSENT, 560 .is_webcam = 1, 561 .input = { { 562 .type = EM28XX_VMUX_COMPOSITE1, 563 .vmux = 0, 564 .amux = EM28XX_AMUX_VIDEO, 565 .gpio = silvercrest_reg_seq, 566 } }, 567 }, 568 [EM2800_BOARD_UNKNOWN] = { 569 .name = "Unknown EM2800 video grabber", 570 .is_em2800 = 1, 571 .tda9887_conf = TDA9887_PRESENT, 572 .decoder = EM28XX_SAA711X, 573 .tuner_type = TUNER_ABSENT, 574 .input = { { 575 .type = EM28XX_VMUX_COMPOSITE1, 576 .vmux = SAA7115_COMPOSITE0, 577 .amux = EM28XX_AMUX_LINE_IN, 578 }, { 579 .type = EM28XX_VMUX_SVIDEO, 580 .vmux = SAA7115_SVIDEO3, 581 .amux = EM28XX_AMUX_LINE_IN, 582 } }, 583 }, 584 [EM2820_BOARD_UNKNOWN] = { 585 .name = "Unknown EM2750/28xx video grabber", 586 .tuner_type = TUNER_ABSENT, 587 .is_webcam = 1, /* To enable sensor probe */ 588 }, 589 [EM2750_BOARD_DLCW_130] = { 590 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 591 .name = "Huaqi DLCW-130", 592 .valid = EM28XX_BOARD_NOT_VALIDATED, 593 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, 594 .tuner_type = TUNER_ABSENT, 595 .is_webcam = 1, 596 .input = { { 597 .type = EM28XX_VMUX_COMPOSITE1, 598 .vmux = 0, 599 .amux = EM28XX_AMUX_VIDEO, 600 } }, 601 }, 602 [EM2820_BOARD_KWORLD_PVRTV2800RF] = { 603 .name = "Kworld PVR TV 2800 RF", 604 .tuner_type = TUNER_TEMIC_PAL, 605 .tda9887_conf = TDA9887_PRESENT, 606 .decoder = EM28XX_SAA711X, 607 .input = { { 608 .type = EM28XX_VMUX_COMPOSITE1, 609 .vmux = SAA7115_COMPOSITE0, 610 .amux = EM28XX_AMUX_LINE_IN, 611 }, { 612 .type = EM28XX_VMUX_SVIDEO, 613 .vmux = SAA7115_SVIDEO3, 614 .amux = EM28XX_AMUX_LINE_IN, 615 } }, 616 }, 617 [EM2820_BOARD_GADMEI_TVR200] = { 618 .name = "Gadmei TVR200", 619 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 620 .tda9887_conf = TDA9887_PRESENT, 621 .decoder = EM28XX_SAA711X, 622 .input = { { 623 .type = EM28XX_VMUX_TELEVISION, 624 .vmux = SAA7115_COMPOSITE2, 625 .amux = EM28XX_AMUX_LINE_IN, 626 }, { 627 .type = EM28XX_VMUX_COMPOSITE1, 628 .vmux = SAA7115_COMPOSITE0, 629 .amux = EM28XX_AMUX_LINE_IN, 630 }, { 631 .type = EM28XX_VMUX_SVIDEO, 632 .vmux = SAA7115_SVIDEO3, 633 .amux = EM28XX_AMUX_LINE_IN, 634 } }, 635 }, 636 [EM2820_BOARD_TERRATEC_CINERGY_250] = { 637 .name = "Terratec Cinergy 250 USB", 638 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 639 .has_ir_i2c = 1, 640 .tda9887_conf = TDA9887_PRESENT, 641 .decoder = EM28XX_SAA711X, 642 .input = { { 643 .type = EM28XX_VMUX_TELEVISION, 644 .vmux = SAA7115_COMPOSITE2, 645 .amux = EM28XX_AMUX_VIDEO, 646 }, { 647 .type = EM28XX_VMUX_COMPOSITE1, 648 .vmux = SAA7115_COMPOSITE0, 649 .amux = EM28XX_AMUX_LINE_IN, 650 }, { 651 .type = EM28XX_VMUX_SVIDEO, 652 .vmux = SAA7115_SVIDEO3, 653 .amux = EM28XX_AMUX_LINE_IN, 654 } }, 655 }, 656 [EM2820_BOARD_PINNACLE_USB_2] = { 657 .name = "Pinnacle PCTV USB 2", 658 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 659 .has_ir_i2c = 1, 660 .tda9887_conf = TDA9887_PRESENT, 661 .decoder = EM28XX_SAA711X, 662 .input = { { 663 .type = EM28XX_VMUX_TELEVISION, 664 .vmux = SAA7115_COMPOSITE2, 665 .amux = EM28XX_AMUX_VIDEO, 666 }, { 667 .type = EM28XX_VMUX_COMPOSITE1, 668 .vmux = SAA7115_COMPOSITE0, 669 .amux = EM28XX_AMUX_LINE_IN, 670 }, { 671 .type = EM28XX_VMUX_SVIDEO, 672 .vmux = SAA7115_SVIDEO3, 673 .amux = EM28XX_AMUX_LINE_IN, 674 } }, 675 }, 676 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = { 677 .name = "Hauppauge WinTV USB 2", 678 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 679 .tda9887_conf = TDA9887_PRESENT | 680 TDA9887_PORT1_ACTIVE | 681 TDA9887_PORT2_ACTIVE, 682 .decoder = EM28XX_TVP5150, 683 .has_msp34xx = 1, 684 .has_ir_i2c = 1, 685 .input = { { 686 .type = EM28XX_VMUX_TELEVISION, 687 .vmux = TVP5150_COMPOSITE0, 688 .amux = MSP_INPUT_DEFAULT, 689 }, { 690 .type = EM28XX_VMUX_SVIDEO, 691 .vmux = TVP5150_SVIDEO, 692 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, 693 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART), 694 } }, 695 }, 696 [EM2820_BOARD_DLINK_USB_TV] = { 697 .name = "D-Link DUB-T210 TV Tuner", 698 .valid = EM28XX_BOARD_NOT_VALIDATED, 699 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 700 .tda9887_conf = TDA9887_PRESENT, 701 .decoder = EM28XX_SAA711X, 702 .input = { { 703 .type = EM28XX_VMUX_TELEVISION, 704 .vmux = SAA7115_COMPOSITE2, 705 .amux = EM28XX_AMUX_LINE_IN, 706 }, { 707 .type = EM28XX_VMUX_COMPOSITE1, 708 .vmux = SAA7115_COMPOSITE0, 709 .amux = EM28XX_AMUX_LINE_IN, 710 }, { 711 .type = EM28XX_VMUX_SVIDEO, 712 .vmux = SAA7115_SVIDEO3, 713 .amux = EM28XX_AMUX_LINE_IN, 714 } }, 715 }, 716 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = { 717 .name = "Hercules Smart TV USB 2.0", 718 .valid = EM28XX_BOARD_NOT_VALIDATED, 719 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 720 .tda9887_conf = TDA9887_PRESENT, 721 .decoder = EM28XX_SAA711X, 722 .input = { { 723 .type = EM28XX_VMUX_TELEVISION, 724 .vmux = SAA7115_COMPOSITE2, 725 .amux = EM28XX_AMUX_LINE_IN, 726 }, { 727 .type = EM28XX_VMUX_COMPOSITE1, 728 .vmux = SAA7115_COMPOSITE0, 729 .amux = EM28XX_AMUX_LINE_IN, 730 }, { 731 .type = EM28XX_VMUX_SVIDEO, 732 .vmux = SAA7115_SVIDEO3, 733 .amux = EM28XX_AMUX_LINE_IN, 734 } }, 735 }, 736 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = { 737 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)", 738 .valid = EM28XX_BOARD_NOT_VALIDATED, 739 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 740 .tda9887_conf = TDA9887_PRESENT, 741 .decoder = EM28XX_SAA711X, 742 .input = { { 743 .type = EM28XX_VMUX_TELEVISION, 744 .vmux = SAA7115_COMPOSITE2, 745 .amux = EM28XX_AMUX_VIDEO, 746 }, { 747 .type = EM28XX_VMUX_COMPOSITE1, 748 .vmux = SAA7115_COMPOSITE0, 749 .amux = EM28XX_AMUX_LINE_IN, 750 }, { 751 .type = EM28XX_VMUX_SVIDEO, 752 .vmux = SAA7115_SVIDEO3, 753 .amux = EM28XX_AMUX_LINE_IN, 754 } }, 755 }, 756 [EM2820_BOARD_GADMEI_UTV310] = { 757 .name = "Gadmei UTV310", 758 .valid = EM28XX_BOARD_NOT_VALIDATED, 759 .tuner_type = TUNER_TNF_5335MF, 760 .tda9887_conf = TDA9887_PRESENT, 761 .decoder = EM28XX_SAA711X, 762 .input = { { 763 .type = EM28XX_VMUX_TELEVISION, 764 .vmux = SAA7115_COMPOSITE1, 765 .amux = EM28XX_AMUX_LINE_IN, 766 }, { 767 .type = EM28XX_VMUX_COMPOSITE1, 768 .vmux = SAA7115_COMPOSITE0, 769 .amux = EM28XX_AMUX_LINE_IN, 770 }, { 771 .type = EM28XX_VMUX_SVIDEO, 772 .vmux = SAA7115_SVIDEO3, 773 .amux = EM28XX_AMUX_LINE_IN, 774 } }, 775 }, 776 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = { 777 .name = "Leadtek Winfast USB II Deluxe", 778 .valid = EM28XX_BOARD_NOT_VALIDATED, 779 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 780 .has_ir_i2c = 1, 781 .tvaudio_addr = 0x58, 782 .tda9887_conf = TDA9887_PRESENT | 783 TDA9887_PORT2_ACTIVE | 784 TDA9887_QSS, 785 .decoder = EM28XX_SAA711X, 786 .adecoder = EM28XX_TVAUDIO, 787 .input = { { 788 .type = EM28XX_VMUX_TELEVISION, 789 .vmux = SAA7115_COMPOSITE4, 790 .amux = EM28XX_AMUX_AUX, 791 }, { 792 .type = EM28XX_VMUX_COMPOSITE1, 793 .vmux = SAA7115_COMPOSITE5, 794 .amux = EM28XX_AMUX_LINE_IN, 795 }, { 796 .type = EM28XX_VMUX_SVIDEO, 797 .vmux = SAA7115_SVIDEO3, 798 .amux = EM28XX_AMUX_LINE_IN, 799 } }, 800 .radio = { 801 .type = EM28XX_RADIO, 802 .amux = EM28XX_AMUX_AUX, 803 } 804 }, 805 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { 806 .name = "Videology 20K14XUSB USB2.0", 807 .valid = EM28XX_BOARD_NOT_VALIDATED, 808 .tuner_type = TUNER_ABSENT, 809 .is_webcam = 1, 810 .input = { { 811 .type = EM28XX_VMUX_COMPOSITE1, 812 .vmux = 0, 813 .amux = EM28XX_AMUX_VIDEO, 814 } }, 815 }, 816 [EM2820_BOARD_SILVERCREST_WEBCAM] = { 817 .name = "Silvercrest Webcam 1.3mpix", 818 .tuner_type = TUNER_ABSENT, 819 .is_webcam = 1, 820 .input = { { 821 .type = EM28XX_VMUX_COMPOSITE1, 822 .vmux = 0, 823 .amux = EM28XX_AMUX_VIDEO, 824 .gpio = silvercrest_reg_seq, 825 } }, 826 }, 827 [EM2821_BOARD_SUPERCOMP_USB_2] = { 828 .name = "Supercomp USB 2.0 TV", 829 .valid = EM28XX_BOARD_NOT_VALIDATED, 830 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 831 .tda9887_conf = TDA9887_PRESENT | 832 TDA9887_PORT1_ACTIVE | 833 TDA9887_PORT2_ACTIVE, 834 .decoder = EM28XX_SAA711X, 835 .input = { { 836 .type = EM28XX_VMUX_TELEVISION, 837 .vmux = SAA7115_COMPOSITE2, 838 .amux = EM28XX_AMUX_LINE_IN, 839 }, { 840 .type = EM28XX_VMUX_COMPOSITE1, 841 .vmux = SAA7115_COMPOSITE0, 842 .amux = EM28XX_AMUX_VIDEO, 843 }, { 844 .type = EM28XX_VMUX_SVIDEO, 845 .vmux = SAA7115_SVIDEO3, 846 .amux = EM28XX_AMUX_LINE_IN, 847 } }, 848 }, 849 [EM2821_BOARD_USBGEAR_VD204] = { 850 .name = "Usbgear VD204v9", 851 .valid = EM28XX_BOARD_NOT_VALIDATED, 852 .tuner_type = TUNER_ABSENT, /* Capture only device */ 853 .decoder = EM28XX_SAA711X, 854 .input = { { 855 .type = EM28XX_VMUX_COMPOSITE1, 856 .vmux = SAA7115_COMPOSITE0, 857 .amux = EM28XX_AMUX_LINE_IN, 858 }, { 859 .type = EM28XX_VMUX_SVIDEO, 860 .vmux = SAA7115_SVIDEO3, 861 .amux = EM28XX_AMUX_LINE_IN, 862 } }, 863 }, 864 [EM2860_BOARD_NETGMBH_CAM] = { 865 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 866 .name = "NetGMBH Cam", 867 .valid = EM28XX_BOARD_NOT_VALIDATED, 868 .tuner_type = TUNER_ABSENT, 869 .is_webcam = 1, 870 .input = { { 871 .type = EM28XX_VMUX_COMPOSITE1, 872 .vmux = 0, 873 .amux = EM28XX_AMUX_VIDEO, 874 } }, 875 }, 876 [EM2860_BOARD_TYPHOON_DVD_MAKER] = { 877 .name = "Typhoon DVD Maker", 878 .decoder = EM28XX_SAA711X, 879 .tuner_type = TUNER_ABSENT, /* Capture only device */ 880 .input = { { 881 .type = EM28XX_VMUX_COMPOSITE1, 882 .vmux = SAA7115_COMPOSITE0, 883 .amux = EM28XX_AMUX_LINE_IN, 884 }, { 885 .type = EM28XX_VMUX_SVIDEO, 886 .vmux = SAA7115_SVIDEO3, 887 .amux = EM28XX_AMUX_LINE_IN, 888 } }, 889 }, 890 [EM2860_BOARD_GADMEI_UTV330] = { 891 .name = "Gadmei UTV330", 892 .valid = EM28XX_BOARD_NOT_VALIDATED, 893 .tuner_type = TUNER_TNF_5335MF, 894 .tda9887_conf = TDA9887_PRESENT, 895 .decoder = EM28XX_SAA711X, 896 .input = { { 897 .type = EM28XX_VMUX_TELEVISION, 898 .vmux = SAA7115_COMPOSITE2, 899 .amux = EM28XX_AMUX_VIDEO, 900 }, { 901 .type = EM28XX_VMUX_COMPOSITE1, 902 .vmux = SAA7115_COMPOSITE0, 903 .amux = EM28XX_AMUX_LINE_IN, 904 }, { 905 .type = EM28XX_VMUX_SVIDEO, 906 .vmux = SAA7115_SVIDEO3, 907 .amux = EM28XX_AMUX_LINE_IN, 908 } }, 909 }, 910 [EM2861_BOARD_GADMEI_UTV330PLUS] = { 911 .name = "Gadmei UTV330+", 912 .tuner_type = TUNER_TNF_5335MF, 913 .tda9887_conf = TDA9887_PRESENT, 914 .ir_codes = RC_MAP_GADMEI_RM008Z, 915 .decoder = EM28XX_SAA711X, 916 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 917 .input = { { 918 .type = EM28XX_VMUX_TELEVISION, 919 .vmux = SAA7115_COMPOSITE2, 920 .amux = EM28XX_AMUX_VIDEO, 921 }, { 922 .type = EM28XX_VMUX_COMPOSITE1, 923 .vmux = SAA7115_COMPOSITE0, 924 .amux = EM28XX_AMUX_LINE_IN, 925 }, { 926 .type = EM28XX_VMUX_SVIDEO, 927 .vmux = SAA7115_SVIDEO3, 928 .amux = EM28XX_AMUX_LINE_IN, 929 } }, 930 }, 931 [EM2860_BOARD_TERRATEC_HYBRID_XS] = { 932 .name = "Terratec Cinergy A Hybrid XS", 933 .valid = EM28XX_BOARD_NOT_VALIDATED, 934 .tuner_type = TUNER_XC2028, 935 .tuner_gpio = default_tuner_gpio, 936 .decoder = EM28XX_TVP5150, 937 938 .input = { { 939 .type = EM28XX_VMUX_TELEVISION, 940 .vmux = TVP5150_COMPOSITE0, 941 .amux = EM28XX_AMUX_VIDEO, 942 .gpio = hauppauge_wintv_hvr_900_analog, 943 }, { 944 .type = EM28XX_VMUX_COMPOSITE1, 945 .vmux = TVP5150_COMPOSITE1, 946 .amux = EM28XX_AMUX_LINE_IN, 947 .gpio = hauppauge_wintv_hvr_900_analog, 948 }, { 949 .type = EM28XX_VMUX_SVIDEO, 950 .vmux = TVP5150_SVIDEO, 951 .amux = EM28XX_AMUX_LINE_IN, 952 .gpio = hauppauge_wintv_hvr_900_analog, 953 } }, 954 }, 955 [EM2861_BOARD_KWORLD_PVRTV_300U] = { 956 .name = "KWorld PVRTV 300U", 957 .valid = EM28XX_BOARD_NOT_VALIDATED, 958 .tuner_type = TUNER_XC2028, 959 .tuner_gpio = default_tuner_gpio, 960 .decoder = EM28XX_TVP5150, 961 .input = { { 962 .type = EM28XX_VMUX_TELEVISION, 963 .vmux = TVP5150_COMPOSITE0, 964 .amux = EM28XX_AMUX_VIDEO, 965 }, { 966 .type = EM28XX_VMUX_COMPOSITE1, 967 .vmux = TVP5150_COMPOSITE1, 968 .amux = EM28XX_AMUX_LINE_IN, 969 }, { 970 .type = EM28XX_VMUX_SVIDEO, 971 .vmux = TVP5150_SVIDEO, 972 .amux = EM28XX_AMUX_LINE_IN, 973 } }, 974 }, 975 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = { 976 .name = "Yakumo MovieMixer", 977 .tuner_type = TUNER_ABSENT, /* Capture only device */ 978 .decoder = EM28XX_TVP5150, 979 .input = { { 980 .type = EM28XX_VMUX_TELEVISION, 981 .vmux = TVP5150_COMPOSITE0, 982 .amux = EM28XX_AMUX_VIDEO, 983 }, { 984 .type = EM28XX_VMUX_COMPOSITE1, 985 .vmux = TVP5150_COMPOSITE1, 986 .amux = EM28XX_AMUX_LINE_IN, 987 }, { 988 .type = EM28XX_VMUX_SVIDEO, 989 .vmux = TVP5150_SVIDEO, 990 .amux = EM28XX_AMUX_LINE_IN, 991 } }, 992 }, 993 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = { 994 .name = "EM2860/TVP5150 Reference Design", 995 .tuner_type = TUNER_ABSENT, /* Capture only device */ 996 .decoder = EM28XX_TVP5150, 997 .input = { { 998 .type = EM28XX_VMUX_COMPOSITE1, 999 .vmux = TVP5150_COMPOSITE1, 1000 .amux = EM28XX_AMUX_LINE_IN, 1001 }, { 1002 .type = EM28XX_VMUX_SVIDEO, 1003 .vmux = TVP5150_SVIDEO, 1004 .amux = EM28XX_AMUX_LINE_IN, 1005 } }, 1006 }, 1007 [EM2861_BOARD_PLEXTOR_PX_TV100U] = { 1008 .name = "Plextor ConvertX PX-TV100U", 1009 .tuner_type = TUNER_TNF_5335MF, 1010 .xclk = EM28XX_XCLK_I2S_MSB_TIMING | 1011 EM28XX_XCLK_FREQUENCY_12MHZ, 1012 .tda9887_conf = TDA9887_PRESENT, 1013 .decoder = EM28XX_TVP5150, 1014 .has_msp34xx = 1, 1015 .input = { { 1016 .type = EM28XX_VMUX_TELEVISION, 1017 .vmux = TVP5150_COMPOSITE0, 1018 .amux = EM28XX_AMUX_LINE_IN, 1019 .gpio = pinnacle_hybrid_pro_analog, 1020 }, { 1021 .type = EM28XX_VMUX_COMPOSITE1, 1022 .vmux = TVP5150_COMPOSITE1, 1023 .amux = EM28XX_AMUX_LINE_IN, 1024 .gpio = pinnacle_hybrid_pro_analog, 1025 }, { 1026 .type = EM28XX_VMUX_SVIDEO, 1027 .vmux = TVP5150_SVIDEO, 1028 .amux = EM28XX_AMUX_LINE_IN, 1029 .gpio = pinnacle_hybrid_pro_analog, 1030 } }, 1031 }, 1032 1033 /* Those boards with em2870 are DVB Only*/ 1034 1035 [EM2870_BOARD_TERRATEC_XS] = { 1036 .name = "Terratec Cinergy T XS", 1037 .valid = EM28XX_BOARD_NOT_VALIDATED, 1038 .tuner_type = TUNER_XC2028, 1039 .tuner_gpio = default_tuner_gpio, 1040 }, 1041 [EM2870_BOARD_TERRATEC_XS_MT2060] = { 1042 .name = "Terratec Cinergy T XS (MT2060)", 1043 .valid = EM28XX_BOARD_NOT_VALIDATED, 1044 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1045 }, 1046 [EM2870_BOARD_KWORLD_350U] = { 1047 .name = "Kworld 350 U DVB-T", 1048 .valid = EM28XX_BOARD_NOT_VALIDATED, 1049 .tuner_type = TUNER_XC2028, 1050 .tuner_gpio = default_tuner_gpio, 1051 }, 1052 [EM2870_BOARD_KWORLD_355U] = { 1053 .name = "Kworld 355 U DVB-T", 1054 .valid = EM28XX_BOARD_NOT_VALIDATED, 1055 .tuner_type = TUNER_ABSENT, 1056 .tuner_gpio = default_tuner_gpio, 1057 .has_dvb = 1, 1058 .dvb_gpio = default_digital, 1059 }, 1060 [EM2870_BOARD_PINNACLE_PCTV_DVB] = { 1061 .name = "Pinnacle PCTV DVB-T", 1062 .valid = EM28XX_BOARD_NOT_VALIDATED, 1063 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1064 /* djh - I have serious doubts this is right... */ 1065 .xclk = EM28XX_XCLK_IR_RC5_MODE | 1066 EM28XX_XCLK_FREQUENCY_10MHZ, 1067 }, 1068 [EM2870_BOARD_COMPRO_VIDEOMATE] = { 1069 .name = "Compro, VideoMate U3", 1070 .valid = EM28XX_BOARD_NOT_VALIDATED, 1071 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1072 }, 1073 1074 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = { 1075 .name = "Terratec Hybrid XS Secam", 1076 .has_msp34xx = 1, 1077 .tuner_type = TUNER_XC2028, 1078 .tuner_gpio = default_tuner_gpio, 1079 .decoder = EM28XX_TVP5150, 1080 .has_dvb = 1, 1081 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital, 1082 .input = { { 1083 .type = EM28XX_VMUX_TELEVISION, 1084 .vmux = TVP5150_COMPOSITE0, 1085 .amux = EM28XX_AMUX_VIDEO, 1086 .gpio = terratec_cinergy_USB_XS_FR_analog, 1087 }, { 1088 .type = EM28XX_VMUX_COMPOSITE1, 1089 .vmux = TVP5150_COMPOSITE1, 1090 .amux = EM28XX_AMUX_LINE_IN, 1091 .gpio = terratec_cinergy_USB_XS_FR_analog, 1092 }, { 1093 .type = EM28XX_VMUX_SVIDEO, 1094 .vmux = TVP5150_SVIDEO, 1095 .amux = EM28XX_AMUX_LINE_IN, 1096 .gpio = terratec_cinergy_USB_XS_FR_analog, 1097 } }, 1098 }, 1099 [EM2884_BOARD_TERRATEC_H5] = { 1100 .name = "Terratec Cinergy H5", 1101 .has_dvb = 1, 1102 #if 0 1103 .tuner_type = TUNER_PHILIPS_TDA8290, 1104 .tuner_addr = 0x41, 1105 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ 1106 .tuner_gpio = terratec_h5_gpio, 1107 #else 1108 .tuner_type = TUNER_ABSENT, 1109 #endif 1110 .def_i2c_bus = 1, 1111 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1112 EM28XX_I2C_FREQ_400_KHZ, 1113 }, 1114 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = { 1115 .name = "Hauppauge WinTV HVR 930C", 1116 .has_dvb = 1, 1117 #if 0 /* FIXME: Add analog support */ 1118 .tuner_type = TUNER_XC5000, 1119 .tuner_addr = 0x41, 1120 .dvb_gpio = hauppauge_930c_digital, 1121 .tuner_gpio = hauppauge_930c_gpio, 1122 #else 1123 .tuner_type = TUNER_ABSENT, 1124 #endif 1125 .ir_codes = RC_MAP_HAUPPAUGE, 1126 .def_i2c_bus = 1, 1127 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1128 EM28XX_I2C_FREQ_400_KHZ, 1129 }, 1130 [EM2884_BOARD_C3TECH_DIGITAL_DUO] = { 1131 .name = "C3 Tech Digital Duo HDTV/SDTV USB", 1132 .has_dvb = 1, 1133 /* FIXME: Add analog support - need a saa7136 driver */ 1134 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 1135 .ir_codes = RC_MAP_EMPTY, 1136 .def_i2c_bus = 1, 1137 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1138 .dvb_gpio = c3tech_digital_duo_digital, 1139 }, 1140 [EM2884_BOARD_CINERGY_HTC_STICK] = { 1141 .name = "Terratec Cinergy HTC Stick", 1142 .has_dvb = 1, 1143 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1144 .tuner_type = TUNER_ABSENT, 1145 .def_i2c_bus = 1, 1146 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1147 EM28XX_I2C_FREQ_400_KHZ, 1148 }, 1149 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = { 1150 .name = "Hauppauge WinTV HVR 900", 1151 .tda9887_conf = TDA9887_PRESENT, 1152 .tuner_type = TUNER_XC2028, 1153 .tuner_gpio = default_tuner_gpio, 1154 .mts_firmware = 1, 1155 .has_dvb = 1, 1156 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1157 .ir_codes = RC_MAP_HAUPPAUGE, 1158 .decoder = EM28XX_TVP5150, 1159 .input = { { 1160 .type = EM28XX_VMUX_TELEVISION, 1161 .vmux = TVP5150_COMPOSITE0, 1162 .amux = EM28XX_AMUX_VIDEO, 1163 .gpio = hauppauge_wintv_hvr_900_analog, 1164 }, { 1165 .type = EM28XX_VMUX_COMPOSITE1, 1166 .vmux = TVP5150_COMPOSITE1, 1167 .amux = EM28XX_AMUX_LINE_IN, 1168 .gpio = hauppauge_wintv_hvr_900_analog, 1169 }, { 1170 .type = EM28XX_VMUX_SVIDEO, 1171 .vmux = TVP5150_SVIDEO, 1172 .amux = EM28XX_AMUX_LINE_IN, 1173 .gpio = hauppauge_wintv_hvr_900_analog, 1174 } }, 1175 }, 1176 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = { 1177 .name = "Hauppauge WinTV HVR 900 (R2)", 1178 .tda9887_conf = TDA9887_PRESENT, 1179 .tuner_type = TUNER_XC2028, 1180 .tuner_gpio = default_tuner_gpio, 1181 .mts_firmware = 1, 1182 .has_dvb = 1, 1183 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1184 .ir_codes = RC_MAP_HAUPPAUGE, 1185 .decoder = EM28XX_TVP5150, 1186 .input = { { 1187 .type = EM28XX_VMUX_TELEVISION, 1188 .vmux = TVP5150_COMPOSITE0, 1189 .amux = EM28XX_AMUX_VIDEO, 1190 .gpio = hauppauge_wintv_hvr_900_analog, 1191 }, { 1192 .type = EM28XX_VMUX_COMPOSITE1, 1193 .vmux = TVP5150_COMPOSITE1, 1194 .amux = EM28XX_AMUX_LINE_IN, 1195 .gpio = hauppauge_wintv_hvr_900_analog, 1196 }, { 1197 .type = EM28XX_VMUX_SVIDEO, 1198 .vmux = TVP5150_SVIDEO, 1199 .amux = EM28XX_AMUX_LINE_IN, 1200 .gpio = hauppauge_wintv_hvr_900_analog, 1201 } }, 1202 }, 1203 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = { 1204 .name = "Hauppauge WinTV HVR 850", 1205 .tuner_type = TUNER_XC2028, 1206 .tuner_gpio = default_tuner_gpio, 1207 .mts_firmware = 1, 1208 .has_dvb = 1, 1209 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1210 .ir_codes = RC_MAP_HAUPPAUGE, 1211 .decoder = EM28XX_TVP5150, 1212 .input = { { 1213 .type = EM28XX_VMUX_TELEVISION, 1214 .vmux = TVP5150_COMPOSITE0, 1215 .amux = EM28XX_AMUX_VIDEO, 1216 .gpio = hauppauge_wintv_hvr_900_analog, 1217 }, { 1218 .type = EM28XX_VMUX_COMPOSITE1, 1219 .vmux = TVP5150_COMPOSITE1, 1220 .amux = EM28XX_AMUX_LINE_IN, 1221 .gpio = hauppauge_wintv_hvr_900_analog, 1222 }, { 1223 .type = EM28XX_VMUX_SVIDEO, 1224 .vmux = TVP5150_SVIDEO, 1225 .amux = EM28XX_AMUX_LINE_IN, 1226 .gpio = hauppauge_wintv_hvr_900_analog, 1227 } }, 1228 }, 1229 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = { 1230 .name = "Hauppauge WinTV HVR 950", 1231 .tuner_type = TUNER_XC2028, 1232 .tuner_gpio = default_tuner_gpio, 1233 .mts_firmware = 1, 1234 .has_dvb = 1, 1235 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1236 .ir_codes = RC_MAP_HAUPPAUGE, 1237 .decoder = EM28XX_TVP5150, 1238 .input = { { 1239 .type = EM28XX_VMUX_TELEVISION, 1240 .vmux = TVP5150_COMPOSITE0, 1241 .amux = EM28XX_AMUX_VIDEO, 1242 .gpio = hauppauge_wintv_hvr_900_analog, 1243 }, { 1244 .type = EM28XX_VMUX_COMPOSITE1, 1245 .vmux = TVP5150_COMPOSITE1, 1246 .amux = EM28XX_AMUX_LINE_IN, 1247 .gpio = hauppauge_wintv_hvr_900_analog, 1248 }, { 1249 .type = EM28XX_VMUX_SVIDEO, 1250 .vmux = TVP5150_SVIDEO, 1251 .amux = EM28XX_AMUX_LINE_IN, 1252 .gpio = hauppauge_wintv_hvr_900_analog, 1253 } }, 1254 }, 1255 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = { 1256 .name = "Pinnacle PCTV HD Pro Stick", 1257 .tuner_type = TUNER_XC2028, 1258 .tuner_gpio = default_tuner_gpio, 1259 .mts_firmware = 1, 1260 .has_dvb = 1, 1261 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1262 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1263 .decoder = EM28XX_TVP5150, 1264 .input = { { 1265 .type = EM28XX_VMUX_TELEVISION, 1266 .vmux = TVP5150_COMPOSITE0, 1267 .amux = EM28XX_AMUX_VIDEO, 1268 .gpio = hauppauge_wintv_hvr_900_analog, 1269 }, { 1270 .type = EM28XX_VMUX_COMPOSITE1, 1271 .vmux = TVP5150_COMPOSITE1, 1272 .amux = EM28XX_AMUX_LINE_IN, 1273 .gpio = hauppauge_wintv_hvr_900_analog, 1274 }, { 1275 .type = EM28XX_VMUX_SVIDEO, 1276 .vmux = TVP5150_SVIDEO, 1277 .amux = EM28XX_AMUX_LINE_IN, 1278 .gpio = hauppauge_wintv_hvr_900_analog, 1279 } }, 1280 }, 1281 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = { 1282 .name = "AMD ATI TV Wonder HD 600", 1283 .tuner_type = TUNER_XC2028, 1284 .tuner_gpio = default_tuner_gpio, 1285 .mts_firmware = 1, 1286 .has_dvb = 1, 1287 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1288 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600, 1289 .decoder = EM28XX_TVP5150, 1290 .input = { { 1291 .type = EM28XX_VMUX_TELEVISION, 1292 .vmux = TVP5150_COMPOSITE0, 1293 .amux = EM28XX_AMUX_VIDEO, 1294 .gpio = hauppauge_wintv_hvr_900_analog, 1295 }, { 1296 .type = EM28XX_VMUX_COMPOSITE1, 1297 .vmux = TVP5150_COMPOSITE1, 1298 .amux = EM28XX_AMUX_LINE_IN, 1299 .gpio = hauppauge_wintv_hvr_900_analog, 1300 }, { 1301 .type = EM28XX_VMUX_SVIDEO, 1302 .vmux = TVP5150_SVIDEO, 1303 .amux = EM28XX_AMUX_LINE_IN, 1304 .gpio = hauppauge_wintv_hvr_900_analog, 1305 } }, 1306 }, 1307 [EM2880_BOARD_TERRATEC_HYBRID_XS] = { 1308 .name = "Terratec Hybrid XS", 1309 .tuner_type = TUNER_XC2028, 1310 .tuner_gpio = default_tuner_gpio, 1311 .decoder = EM28XX_TVP5150, 1312 .has_dvb = 1, 1313 .dvb_gpio = default_digital, 1314 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1315 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1316 .input = { { 1317 .type = EM28XX_VMUX_TELEVISION, 1318 .vmux = TVP5150_COMPOSITE0, 1319 .amux = EM28XX_AMUX_VIDEO, 1320 .gpio = default_analog, 1321 }, { 1322 .type = EM28XX_VMUX_COMPOSITE1, 1323 .vmux = TVP5150_COMPOSITE1, 1324 .amux = EM28XX_AMUX_LINE_IN, 1325 .gpio = default_analog, 1326 }, { 1327 .type = EM28XX_VMUX_SVIDEO, 1328 .vmux = TVP5150_SVIDEO, 1329 .amux = EM28XX_AMUX_LINE_IN, 1330 .gpio = default_analog, 1331 } }, 1332 }, 1333 /* maybe there's a reason behind it why Terratec sells the Hybrid XS 1334 as Prodigy XS with a different PID, let's keep it separated for now 1335 maybe we'll need it lateron */ 1336 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = { 1337 .name = "Terratec Prodigy XS", 1338 .tuner_type = TUNER_XC2028, 1339 .tuner_gpio = default_tuner_gpio, 1340 .decoder = EM28XX_TVP5150, 1341 .input = { { 1342 .type = EM28XX_VMUX_TELEVISION, 1343 .vmux = TVP5150_COMPOSITE0, 1344 .amux = EM28XX_AMUX_VIDEO, 1345 .gpio = hauppauge_wintv_hvr_900_analog, 1346 }, { 1347 .type = EM28XX_VMUX_COMPOSITE1, 1348 .vmux = TVP5150_COMPOSITE1, 1349 .amux = EM28XX_AMUX_LINE_IN, 1350 .gpio = hauppauge_wintv_hvr_900_analog, 1351 }, { 1352 .type = EM28XX_VMUX_SVIDEO, 1353 .vmux = TVP5150_SVIDEO, 1354 .amux = EM28XX_AMUX_LINE_IN, 1355 .gpio = hauppauge_wintv_hvr_900_analog, 1356 } }, 1357 }, 1358 [EM2820_BOARD_MSI_VOX_USB_2] = { 1359 .name = "MSI VOX USB 2.0", 1360 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1361 .tda9887_conf = TDA9887_PRESENT | 1362 TDA9887_PORT1_ACTIVE | 1363 TDA9887_PORT2_ACTIVE, 1364 .max_range_640_480 = 1, 1365 .decoder = EM28XX_SAA711X, 1366 .input = { { 1367 .type = EM28XX_VMUX_TELEVISION, 1368 .vmux = SAA7115_COMPOSITE4, 1369 .amux = EM28XX_AMUX_VIDEO, 1370 }, { 1371 .type = EM28XX_VMUX_COMPOSITE1, 1372 .vmux = SAA7115_COMPOSITE0, 1373 .amux = EM28XX_AMUX_LINE_IN, 1374 }, { 1375 .type = EM28XX_VMUX_SVIDEO, 1376 .vmux = SAA7115_SVIDEO3, 1377 .amux = EM28XX_AMUX_LINE_IN, 1378 } }, 1379 }, 1380 [EM2800_BOARD_TERRATEC_CINERGY_200] = { 1381 .name = "Terratec Cinergy 200 USB", 1382 .is_em2800 = 1, 1383 .has_ir_i2c = 1, 1384 .tuner_type = TUNER_LG_TALN, 1385 .tda9887_conf = TDA9887_PRESENT, 1386 .decoder = EM28XX_SAA711X, 1387 .input = { { 1388 .type = EM28XX_VMUX_TELEVISION, 1389 .vmux = SAA7115_COMPOSITE2, 1390 .amux = EM28XX_AMUX_VIDEO, 1391 }, { 1392 .type = EM28XX_VMUX_COMPOSITE1, 1393 .vmux = SAA7115_COMPOSITE0, 1394 .amux = EM28XX_AMUX_LINE_IN, 1395 }, { 1396 .type = EM28XX_VMUX_SVIDEO, 1397 .vmux = SAA7115_SVIDEO3, 1398 .amux = EM28XX_AMUX_LINE_IN, 1399 } }, 1400 }, 1401 [EM2800_BOARD_GRABBEEX_USB2800] = { 1402 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder", 1403 .is_em2800 = 1, 1404 .decoder = EM28XX_SAA711X, 1405 .tuner_type = TUNER_ABSENT, /* capture only board */ 1406 .input = { { 1407 .type = EM28XX_VMUX_COMPOSITE1, 1408 .vmux = SAA7115_COMPOSITE0, 1409 .amux = EM28XX_AMUX_LINE_IN, 1410 }, { 1411 .type = EM28XX_VMUX_SVIDEO, 1412 .vmux = SAA7115_SVIDEO3, 1413 .amux = EM28XX_AMUX_LINE_IN, 1414 } }, 1415 }, 1416 [EM2800_BOARD_VC211A] = { 1417 .name = "Actionmaster/LinXcel/Digitus VC211A", 1418 .is_em2800 = 1, 1419 .tuner_type = TUNER_ABSENT, /* Capture-only board */ 1420 .decoder = EM28XX_SAA711X, 1421 .input = { { 1422 .type = EM28XX_VMUX_COMPOSITE1, 1423 .vmux = SAA7115_COMPOSITE0, 1424 .amux = EM28XX_AMUX_LINE_IN, 1425 .gpio = vc211a_enable, 1426 }, { 1427 .type = EM28XX_VMUX_SVIDEO, 1428 .vmux = SAA7115_SVIDEO3, 1429 .amux = EM28XX_AMUX_LINE_IN, 1430 .gpio = vc211a_enable, 1431 } }, 1432 }, 1433 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = { 1434 .name = "Leadtek Winfast USB II", 1435 .is_em2800 = 1, 1436 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1437 .tda9887_conf = TDA9887_PRESENT, 1438 .decoder = EM28XX_SAA711X, 1439 .input = { { 1440 .type = EM28XX_VMUX_TELEVISION, 1441 .vmux = SAA7115_COMPOSITE2, 1442 .amux = EM28XX_AMUX_VIDEO, 1443 }, { 1444 .type = EM28XX_VMUX_COMPOSITE1, 1445 .vmux = SAA7115_COMPOSITE0, 1446 .amux = EM28XX_AMUX_LINE_IN, 1447 }, { 1448 .type = EM28XX_VMUX_SVIDEO, 1449 .vmux = SAA7115_SVIDEO3, 1450 .amux = EM28XX_AMUX_LINE_IN, 1451 } }, 1452 }, 1453 [EM2800_BOARD_KWORLD_USB2800] = { 1454 .name = "Kworld USB2800", 1455 .is_em2800 = 1, 1456 .tuner_type = TUNER_PHILIPS_FCV1236D, 1457 .tda9887_conf = TDA9887_PRESENT, 1458 .decoder = EM28XX_SAA711X, 1459 .input = { { 1460 .type = EM28XX_VMUX_TELEVISION, 1461 .vmux = SAA7115_COMPOSITE2, 1462 .amux = EM28XX_AMUX_VIDEO, 1463 }, { 1464 .type = EM28XX_VMUX_COMPOSITE1, 1465 .vmux = SAA7115_COMPOSITE0, 1466 .amux = EM28XX_AMUX_LINE_IN, 1467 }, { 1468 .type = EM28XX_VMUX_SVIDEO, 1469 .vmux = SAA7115_SVIDEO3, 1470 .amux = EM28XX_AMUX_LINE_IN, 1471 } }, 1472 }, 1473 [EM2820_BOARD_PINNACLE_DVC_90] = { 1474 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker " 1475 "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U", 1476 .tuner_type = TUNER_ABSENT, /* capture only board */ 1477 .decoder = EM28XX_SAA711X, 1478 .input = { { 1479 .type = EM28XX_VMUX_COMPOSITE1, 1480 .vmux = SAA7115_COMPOSITE0, 1481 .amux = EM28XX_AMUX_LINE_IN, 1482 }, { 1483 .type = EM28XX_VMUX_SVIDEO, 1484 .vmux = SAA7115_SVIDEO3, 1485 .amux = EM28XX_AMUX_LINE_IN, 1486 } }, 1487 }, 1488 [EM2800_BOARD_VGEAR_POCKETTV] = { 1489 .name = "V-Gear PocketTV", 1490 .is_em2800 = 1, 1491 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1492 .tda9887_conf = TDA9887_PRESENT, 1493 .decoder = EM28XX_SAA711X, 1494 .input = { { 1495 .type = EM28XX_VMUX_TELEVISION, 1496 .vmux = SAA7115_COMPOSITE2, 1497 .amux = EM28XX_AMUX_VIDEO, 1498 }, { 1499 .type = EM28XX_VMUX_COMPOSITE1, 1500 .vmux = SAA7115_COMPOSITE0, 1501 .amux = EM28XX_AMUX_LINE_IN, 1502 }, { 1503 .type = EM28XX_VMUX_SVIDEO, 1504 .vmux = SAA7115_SVIDEO3, 1505 .amux = EM28XX_AMUX_LINE_IN, 1506 } }, 1507 }, 1508 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = { 1509 .name = "Pixelview PlayTV Box 4 USB 2.0", 1510 .tda9887_conf = TDA9887_PRESENT, 1511 .tuner_type = TUNER_YMEC_TVF_5533MF, 1512 .decoder = EM28XX_SAA711X, 1513 .input = { { 1514 .type = EM28XX_VMUX_TELEVISION, 1515 .vmux = SAA7115_COMPOSITE2, 1516 .amux = EM28XX_AMUX_VIDEO, 1517 .aout = EM28XX_AOUT_MONO | /* I2S */ 1518 EM28XX_AOUT_MASTER, /* Line out pin */ 1519 }, { 1520 .type = EM28XX_VMUX_COMPOSITE1, 1521 .vmux = SAA7115_COMPOSITE0, 1522 .amux = EM28XX_AMUX_LINE_IN, 1523 }, { 1524 .type = EM28XX_VMUX_SVIDEO, 1525 .vmux = SAA7115_SVIDEO3, 1526 .amux = EM28XX_AMUX_LINE_IN, 1527 } }, 1528 }, 1529 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = { 1530 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0", 1531 .buttons = std_snapshot_button, 1532 .tda9887_conf = TDA9887_PRESENT, 1533 .tuner_type = TUNER_YMEC_TVF_5533MF, 1534 .decoder = EM28XX_SAA711X, 1535 .input = { { 1536 .type = EM28XX_VMUX_TELEVISION, 1537 .vmux = SAA7115_COMPOSITE2, 1538 .amux = EM28XX_AMUX_VIDEO, 1539 .aout = EM28XX_AOUT_MONO | /* I2S */ 1540 EM28XX_AOUT_MASTER, /* Line out pin */ 1541 }, { 1542 .type = EM28XX_VMUX_COMPOSITE1, 1543 .vmux = SAA7115_COMPOSITE0, 1544 .amux = EM28XX_AMUX_LINE_IN, 1545 }, { 1546 .type = EM28XX_VMUX_SVIDEO, 1547 .vmux = SAA7115_SVIDEO3, 1548 .amux = EM28XX_AMUX_LINE_IN, 1549 } }, 1550 }, 1551 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = { 1552 .name = "EM2860/SAA711X Reference Design", 1553 .buttons = std_snapshot_button, 1554 .tuner_type = TUNER_ABSENT, 1555 .decoder = EM28XX_SAA711X, 1556 .input = { { 1557 .type = EM28XX_VMUX_SVIDEO, 1558 .vmux = SAA7115_SVIDEO3, 1559 }, { 1560 .type = EM28XX_VMUX_COMPOSITE1, 1561 .vmux = SAA7115_COMPOSITE0, 1562 } }, 1563 }, 1564 1565 [EM2874_BOARD_LEADERSHIP_ISDBT] = { 1566 .def_i2c_bus = 1, 1567 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1568 EM28XX_I2C_FREQ_100_KHZ, 1569 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ, 1570 .name = "EM2874 Leadership ISDBT", 1571 .tuner_type = TUNER_ABSENT, 1572 .tuner_gpio = leadership_reset, 1573 .dvb_gpio = leadership_digital, 1574 .has_dvb = 1, 1575 }, 1576 1577 [EM2880_BOARD_MSI_DIGIVOX_AD] = { 1578 .name = "MSI DigiVox A/D", 1579 .valid = EM28XX_BOARD_NOT_VALIDATED, 1580 .tuner_type = TUNER_XC2028, 1581 .tuner_gpio = default_tuner_gpio, 1582 .decoder = EM28XX_TVP5150, 1583 .input = { { 1584 .type = EM28XX_VMUX_TELEVISION, 1585 .vmux = TVP5150_COMPOSITE0, 1586 .amux = EM28XX_AMUX_VIDEO, 1587 .gpio = em2880_msi_digivox_ad_analog, 1588 }, { 1589 .type = EM28XX_VMUX_COMPOSITE1, 1590 .vmux = TVP5150_COMPOSITE1, 1591 .amux = EM28XX_AMUX_LINE_IN, 1592 .gpio = em2880_msi_digivox_ad_analog, 1593 }, { 1594 .type = EM28XX_VMUX_SVIDEO, 1595 .vmux = TVP5150_SVIDEO, 1596 .amux = EM28XX_AMUX_LINE_IN, 1597 .gpio = em2880_msi_digivox_ad_analog, 1598 } }, 1599 }, 1600 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = { 1601 .name = "MSI DigiVox A/D II", 1602 .valid = EM28XX_BOARD_NOT_VALIDATED, 1603 .tuner_type = TUNER_XC2028, 1604 .tuner_gpio = default_tuner_gpio, 1605 .decoder = EM28XX_TVP5150, 1606 .input = { { 1607 .type = EM28XX_VMUX_TELEVISION, 1608 .vmux = TVP5150_COMPOSITE0, 1609 .amux = EM28XX_AMUX_VIDEO, 1610 .gpio = em2880_msi_digivox_ad_analog, 1611 }, { 1612 .type = EM28XX_VMUX_COMPOSITE1, 1613 .vmux = TVP5150_COMPOSITE1, 1614 .amux = EM28XX_AMUX_LINE_IN, 1615 .gpio = em2880_msi_digivox_ad_analog, 1616 }, { 1617 .type = EM28XX_VMUX_SVIDEO, 1618 .vmux = TVP5150_SVIDEO, 1619 .amux = EM28XX_AMUX_LINE_IN, 1620 .gpio = em2880_msi_digivox_ad_analog, 1621 } }, 1622 }, 1623 [EM2880_BOARD_KWORLD_DVB_305U] = { 1624 .name = "KWorld DVB-T 305U", 1625 .tuner_type = TUNER_XC2028, 1626 .tuner_gpio = default_tuner_gpio, 1627 .decoder = EM28XX_TVP5150, 1628 .input = { { 1629 .type = EM28XX_VMUX_TELEVISION, 1630 .vmux = TVP5150_COMPOSITE0, 1631 .amux = EM28XX_AMUX_VIDEO, 1632 }, { 1633 .type = EM28XX_VMUX_COMPOSITE1, 1634 .vmux = TVP5150_COMPOSITE1, 1635 .amux = EM28XX_AMUX_LINE_IN, 1636 }, { 1637 .type = EM28XX_VMUX_SVIDEO, 1638 .vmux = TVP5150_SVIDEO, 1639 .amux = EM28XX_AMUX_LINE_IN, 1640 } }, 1641 }, 1642 [EM2880_BOARD_KWORLD_DVB_310U] = { 1643 .name = "KWorld DVB-T 310U", 1644 .tuner_type = TUNER_XC2028, 1645 .tuner_gpio = default_tuner_gpio, 1646 .has_dvb = 1, 1647 .dvb_gpio = default_digital, 1648 .mts_firmware = 1, 1649 .decoder = EM28XX_TVP5150, 1650 .input = { { 1651 .type = EM28XX_VMUX_TELEVISION, 1652 .vmux = TVP5150_COMPOSITE0, 1653 .amux = EM28XX_AMUX_VIDEO, 1654 .gpio = default_analog, 1655 }, { 1656 .type = EM28XX_VMUX_COMPOSITE1, 1657 .vmux = TVP5150_COMPOSITE1, 1658 .amux = EM28XX_AMUX_LINE_IN, 1659 .gpio = default_analog, 1660 }, { /* S-video has not been tested yet */ 1661 .type = EM28XX_VMUX_SVIDEO, 1662 .vmux = TVP5150_SVIDEO, 1663 .amux = EM28XX_AMUX_LINE_IN, 1664 .gpio = default_analog, 1665 } }, 1666 }, 1667 [EM2882_BOARD_KWORLD_ATSC_315U] = { 1668 .name = "KWorld ATSC 315U HDTV TV Box", 1669 .valid = EM28XX_BOARD_NOT_VALIDATED, 1670 .tuner_type = TUNER_THOMSON_DTT761X, 1671 .tuner_gpio = em2882_kworld_315u_tuner_gpio, 1672 .tda9887_conf = TDA9887_PRESENT, 1673 .decoder = EM28XX_SAA711X, 1674 .has_dvb = 1, 1675 .dvb_gpio = em2882_kworld_315u_digital, 1676 .ir_codes = RC_MAP_KWORLD_315U, 1677 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1678 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1679 /* Analog mode - still not ready */ 1680 /*.input = { { 1681 .type = EM28XX_VMUX_TELEVISION, 1682 .vmux = SAA7115_COMPOSITE2, 1683 .amux = EM28XX_AMUX_VIDEO, 1684 .gpio = em2882_kworld_315u_analog, 1685 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1686 }, { 1687 .type = EM28XX_VMUX_COMPOSITE1, 1688 .vmux = SAA7115_COMPOSITE0, 1689 .amux = EM28XX_AMUX_LINE_IN, 1690 .gpio = em2882_kworld_315u_analog1, 1691 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1692 }, { 1693 .type = EM28XX_VMUX_SVIDEO, 1694 .vmux = SAA7115_SVIDEO3, 1695 .amux = EM28XX_AMUX_LINE_IN, 1696 .gpio = em2882_kworld_315u_analog1, 1697 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1698 } }, */ 1699 }, 1700 [EM2880_BOARD_EMPIRE_DUAL_TV] = { 1701 .name = "Empire dual TV", 1702 .tuner_type = TUNER_XC2028, 1703 .tuner_gpio = default_tuner_gpio, 1704 .has_dvb = 1, 1705 .dvb_gpio = default_digital, 1706 .mts_firmware = 1, 1707 .decoder = EM28XX_TVP5150, 1708 .input = { { 1709 .type = EM28XX_VMUX_TELEVISION, 1710 .vmux = TVP5150_COMPOSITE0, 1711 .amux = EM28XX_AMUX_VIDEO, 1712 .gpio = default_analog, 1713 }, { 1714 .type = EM28XX_VMUX_COMPOSITE1, 1715 .vmux = TVP5150_COMPOSITE1, 1716 .amux = EM28XX_AMUX_LINE_IN, 1717 .gpio = default_analog, 1718 }, { 1719 .type = EM28XX_VMUX_SVIDEO, 1720 .vmux = TVP5150_SVIDEO, 1721 .amux = EM28XX_AMUX_LINE_IN, 1722 .gpio = default_analog, 1723 } }, 1724 }, 1725 [EM2881_BOARD_DNT_DA2_HYBRID] = { 1726 .name = "DNT DA2 Hybrid", 1727 .valid = EM28XX_BOARD_NOT_VALIDATED, 1728 .tuner_type = TUNER_XC2028, 1729 .tuner_gpio = default_tuner_gpio, 1730 .decoder = EM28XX_TVP5150, 1731 .input = { { 1732 .type = EM28XX_VMUX_TELEVISION, 1733 .vmux = TVP5150_COMPOSITE0, 1734 .amux = EM28XX_AMUX_VIDEO, 1735 .gpio = default_analog, 1736 }, { 1737 .type = EM28XX_VMUX_COMPOSITE1, 1738 .vmux = TVP5150_COMPOSITE1, 1739 .amux = EM28XX_AMUX_LINE_IN, 1740 .gpio = default_analog, 1741 }, { 1742 .type = EM28XX_VMUX_SVIDEO, 1743 .vmux = TVP5150_SVIDEO, 1744 .amux = EM28XX_AMUX_LINE_IN, 1745 .gpio = default_analog, 1746 } }, 1747 }, 1748 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { 1749 .name = "Pinnacle Hybrid Pro", 1750 .tuner_type = TUNER_XC2028, 1751 .tuner_gpio = default_tuner_gpio, 1752 .decoder = EM28XX_TVP5150, 1753 .has_dvb = 1, 1754 .dvb_gpio = pinnacle_hybrid_pro_digital, 1755 .input = { { 1756 .type = EM28XX_VMUX_TELEVISION, 1757 .vmux = TVP5150_COMPOSITE0, 1758 .amux = EM28XX_AMUX_VIDEO, 1759 .gpio = pinnacle_hybrid_pro_analog, 1760 }, { 1761 .type = EM28XX_VMUX_COMPOSITE1, 1762 .vmux = TVP5150_COMPOSITE1, 1763 .amux = EM28XX_AMUX_LINE_IN, 1764 .gpio = pinnacle_hybrid_pro_analog, 1765 }, { 1766 .type = EM28XX_VMUX_SVIDEO, 1767 .vmux = TVP5150_SVIDEO, 1768 .amux = EM28XX_AMUX_LINE_IN, 1769 .gpio = pinnacle_hybrid_pro_analog, 1770 } }, 1771 }, 1772 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = { 1773 .name = "Pinnacle Hybrid Pro (330e)", 1774 .tuner_type = TUNER_XC2028, 1775 .tuner_gpio = default_tuner_gpio, 1776 .mts_firmware = 1, 1777 .has_dvb = 1, 1778 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1779 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1780 .decoder = EM28XX_TVP5150, 1781 .input = { { 1782 .type = EM28XX_VMUX_TELEVISION, 1783 .vmux = TVP5150_COMPOSITE0, 1784 .amux = EM28XX_AMUX_VIDEO, 1785 .gpio = hauppauge_wintv_hvr_900_analog, 1786 }, { 1787 .type = EM28XX_VMUX_COMPOSITE1, 1788 .vmux = TVP5150_COMPOSITE1, 1789 .amux = EM28XX_AMUX_LINE_IN, 1790 .gpio = hauppauge_wintv_hvr_900_analog, 1791 }, { 1792 .type = EM28XX_VMUX_SVIDEO, 1793 .vmux = TVP5150_SVIDEO, 1794 .amux = EM28XX_AMUX_LINE_IN, 1795 .gpio = hauppauge_wintv_hvr_900_analog, 1796 } }, 1797 }, 1798 [EM2882_BOARD_KWORLD_VS_DVBT] = { 1799 .name = "Kworld VS-DVB-T 323UR", 1800 .tuner_type = TUNER_XC2028, 1801 .tuner_gpio = default_tuner_gpio, 1802 .decoder = EM28XX_TVP5150, 1803 .mts_firmware = 1, 1804 .has_dvb = 1, 1805 .dvb_gpio = kworld_330u_digital, 1806 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1807 .ir_codes = RC_MAP_KWORLD_315U, 1808 .input = { { 1809 .type = EM28XX_VMUX_TELEVISION, 1810 .vmux = TVP5150_COMPOSITE0, 1811 .amux = EM28XX_AMUX_VIDEO, 1812 }, { 1813 .type = EM28XX_VMUX_COMPOSITE1, 1814 .vmux = TVP5150_COMPOSITE1, 1815 .amux = EM28XX_AMUX_LINE_IN, 1816 }, { 1817 .type = EM28XX_VMUX_SVIDEO, 1818 .vmux = TVP5150_SVIDEO, 1819 .amux = EM28XX_AMUX_LINE_IN, 1820 } }, 1821 }, 1822 [EM2882_BOARD_TERRATEC_HYBRID_XS] = { 1823 .name = "Terratec Cinnergy Hybrid T USB XS (em2882)", 1824 .tuner_type = TUNER_XC2028, 1825 .tuner_gpio = default_tuner_gpio, 1826 .mts_firmware = 1, 1827 .decoder = EM28XX_TVP5150, 1828 .has_dvb = 1, 1829 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1830 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1831 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1832 .input = { { 1833 .type = EM28XX_VMUX_TELEVISION, 1834 .vmux = TVP5150_COMPOSITE0, 1835 .amux = EM28XX_AMUX_VIDEO, 1836 .gpio = hauppauge_wintv_hvr_900_analog, 1837 }, { 1838 .type = EM28XX_VMUX_COMPOSITE1, 1839 .vmux = TVP5150_COMPOSITE1, 1840 .amux = EM28XX_AMUX_LINE_IN, 1841 .gpio = hauppauge_wintv_hvr_900_analog, 1842 }, { 1843 .type = EM28XX_VMUX_SVIDEO, 1844 .vmux = TVP5150_SVIDEO, 1845 .amux = EM28XX_AMUX_LINE_IN, 1846 .gpio = hauppauge_wintv_hvr_900_analog, 1847 } }, 1848 }, 1849 [EM2882_BOARD_DIKOM_DK300] = { 1850 .name = "Dikom DK300", 1851 .tuner_type = TUNER_XC2028, 1852 .tuner_gpio = default_tuner_gpio, 1853 .decoder = EM28XX_TVP5150, 1854 .mts_firmware = 1, 1855 .has_dvb = 1, 1856 .dvb_gpio = dikom_dk300_digital, 1857 .input = { { 1858 .type = EM28XX_VMUX_TELEVISION, 1859 .vmux = TVP5150_COMPOSITE0, 1860 .amux = EM28XX_AMUX_VIDEO, 1861 .gpio = default_analog, 1862 } }, 1863 }, 1864 [EM2883_BOARD_KWORLD_HYBRID_330U] = { 1865 .name = "Kworld PlusTV HD Hybrid 330", 1866 .tuner_type = TUNER_XC2028, 1867 .tuner_gpio = default_tuner_gpio, 1868 .decoder = EM28XX_TVP5150, 1869 .mts_firmware = 1, 1870 .has_dvb = 1, 1871 .dvb_gpio = kworld_330u_digital, 1872 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1873 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1874 EM28XX_I2C_EEPROM_ON_BOARD | 1875 EM28XX_I2C_EEPROM_KEY_VALID, 1876 .input = { { 1877 .type = EM28XX_VMUX_TELEVISION, 1878 .vmux = TVP5150_COMPOSITE0, 1879 .amux = EM28XX_AMUX_VIDEO, 1880 .gpio = kworld_330u_analog, 1881 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1882 }, { 1883 .type = EM28XX_VMUX_COMPOSITE1, 1884 .vmux = TVP5150_COMPOSITE1, 1885 .amux = EM28XX_AMUX_LINE_IN, 1886 .gpio = kworld_330u_analog, 1887 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1888 }, { 1889 .type = EM28XX_VMUX_SVIDEO, 1890 .vmux = TVP5150_SVIDEO, 1891 .amux = EM28XX_AMUX_LINE_IN, 1892 .gpio = kworld_330u_analog, 1893 } }, 1894 }, 1895 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { 1896 .name = "Compro VideoMate ForYou/Stereo", 1897 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1898 .tvaudio_addr = 0xb0, 1899 .tda9887_conf = TDA9887_PRESENT, 1900 .decoder = EM28XX_TVP5150, 1901 .adecoder = EM28XX_TVAUDIO, 1902 .mute_gpio = compro_mute_gpio, 1903 .input = { { 1904 .type = EM28XX_VMUX_TELEVISION, 1905 .vmux = TVP5150_COMPOSITE0, 1906 .amux = EM28XX_AMUX_VIDEO, 1907 .gpio = compro_unmute_tv_gpio, 1908 }, { 1909 .type = EM28XX_VMUX_SVIDEO, 1910 .vmux = TVP5150_SVIDEO, 1911 .amux = EM28XX_AMUX_LINE_IN, 1912 .gpio = compro_unmute_svid_gpio, 1913 } }, 1914 }, 1915 [EM2860_BOARD_KAIOMY_TVNPC_U2] = { 1916 .name = "Kaiomy TVnPC U2", 1917 .vchannels = 3, 1918 .tuner_type = TUNER_XC2028, 1919 .tuner_addr = 0x61, 1920 .mts_firmware = 1, 1921 .decoder = EM28XX_TVP5150, 1922 .tuner_gpio = default_tuner_gpio, 1923 .ir_codes = RC_MAP_KAIOMY, 1924 .input = { { 1925 .type = EM28XX_VMUX_TELEVISION, 1926 .vmux = TVP5150_COMPOSITE0, 1927 .amux = EM28XX_AMUX_VIDEO, 1928 1929 }, { 1930 .type = EM28XX_VMUX_COMPOSITE1, 1931 .vmux = TVP5150_COMPOSITE1, 1932 .amux = EM28XX_AMUX_LINE_IN, 1933 }, { 1934 .type = EM28XX_VMUX_SVIDEO, 1935 .vmux = TVP5150_SVIDEO, 1936 .amux = EM28XX_AMUX_LINE_IN, 1937 } }, 1938 .radio = { 1939 .type = EM28XX_RADIO, 1940 .amux = EM28XX_AMUX_LINE_IN, 1941 } 1942 }, 1943 [EM2860_BOARD_EASYCAP] = { 1944 .name = "Easy Cap Capture DC-60", 1945 .vchannels = 2, 1946 .tuner_type = TUNER_ABSENT, 1947 .decoder = EM28XX_SAA711X, 1948 .input = { { 1949 .type = EM28XX_VMUX_COMPOSITE1, 1950 .vmux = SAA7115_COMPOSITE0, 1951 .amux = EM28XX_AMUX_LINE_IN, 1952 }, { 1953 .type = EM28XX_VMUX_SVIDEO, 1954 .vmux = SAA7115_SVIDEO3, 1955 .amux = EM28XX_AMUX_LINE_IN, 1956 } }, 1957 }, 1958 [EM2820_BOARD_IODATA_GVMVP_SZ] = { 1959 .name = "IO-DATA GV-MVP/SZ", 1960 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 1961 .tuner_gpio = default_tuner_gpio, 1962 .tda9887_conf = TDA9887_PRESENT, 1963 .decoder = EM28XX_TVP5150, 1964 .input = { { 1965 .type = EM28XX_VMUX_TELEVISION, 1966 .vmux = TVP5150_COMPOSITE0, 1967 .amux = EM28XX_AMUX_VIDEO, 1968 }, { /* Composite has not been tested yet */ 1969 .type = EM28XX_VMUX_COMPOSITE1, 1970 .vmux = TVP5150_COMPOSITE1, 1971 .amux = EM28XX_AMUX_VIDEO, 1972 }, { /* S-video has not been tested yet */ 1973 .type = EM28XX_VMUX_SVIDEO, 1974 .vmux = TVP5150_SVIDEO, 1975 .amux = EM28XX_AMUX_VIDEO, 1976 } }, 1977 }, 1978 [EM2860_BOARD_TERRATEC_GRABBY] = { 1979 .name = "Terratec Grabby", 1980 .vchannels = 2, 1981 .tuner_type = TUNER_ABSENT, 1982 .decoder = EM28XX_SAA711X, 1983 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1984 .input = { { 1985 .type = EM28XX_VMUX_COMPOSITE1, 1986 .vmux = SAA7115_COMPOSITE0, 1987 .amux = EM28XX_AMUX_LINE_IN, 1988 }, { 1989 .type = EM28XX_VMUX_SVIDEO, 1990 .vmux = SAA7115_SVIDEO3, 1991 .amux = EM28XX_AMUX_LINE_IN, 1992 } }, 1993 }, 1994 [EM2860_BOARD_TERRATEC_AV350] = { 1995 .name = "Terratec AV350", 1996 .vchannels = 2, 1997 .tuner_type = TUNER_ABSENT, 1998 .decoder = EM28XX_TVP5150, 1999 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2000 .mute_gpio = terratec_av350_mute_gpio, 2001 .input = { { 2002 .type = EM28XX_VMUX_COMPOSITE1, 2003 .vmux = TVP5150_COMPOSITE1, 2004 .amux = EM28XX_AUDIO_SRC_LINE, 2005 .gpio = terratec_av350_unmute_gpio, 2006 2007 }, { 2008 .type = EM28XX_VMUX_SVIDEO, 2009 .vmux = TVP5150_SVIDEO, 2010 .amux = EM28XX_AUDIO_SRC_LINE, 2011 .gpio = terratec_av350_unmute_gpio, 2012 } }, 2013 }, 2014 2015 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = { 2016 .name = "Elgato Video Capture", 2017 .decoder = EM28XX_SAA711X, 2018 .tuner_type = TUNER_ABSENT, /* Capture only device */ 2019 .input = { { 2020 .type = EM28XX_VMUX_COMPOSITE1, 2021 .vmux = SAA7115_COMPOSITE0, 2022 .amux = EM28XX_AMUX_LINE_IN, 2023 }, { 2024 .type = EM28XX_VMUX_SVIDEO, 2025 .vmux = SAA7115_SVIDEO3, 2026 .amux = EM28XX_AMUX_LINE_IN, 2027 } }, 2028 }, 2029 2030 [EM2882_BOARD_EVGA_INDTUBE] = { 2031 .name = "Evga inDtube", 2032 .tuner_type = TUNER_XC2028, 2033 .tuner_gpio = default_tuner_gpio, 2034 .decoder = EM28XX_TVP5150, 2035 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 2036 .mts_firmware = 1, 2037 .has_dvb = 1, 2038 .dvb_gpio = evga_indtube_digital, 2039 .ir_codes = RC_MAP_EVGA_INDTUBE, 2040 .input = { { 2041 .type = EM28XX_VMUX_TELEVISION, 2042 .vmux = TVP5150_COMPOSITE0, 2043 .amux = EM28XX_AMUX_VIDEO, 2044 .gpio = evga_indtube_analog, 2045 }, { 2046 .type = EM28XX_VMUX_COMPOSITE1, 2047 .vmux = TVP5150_COMPOSITE1, 2048 .amux = EM28XX_AMUX_LINE_IN, 2049 .gpio = evga_indtube_analog, 2050 }, { 2051 .type = EM28XX_VMUX_SVIDEO, 2052 .vmux = TVP5150_SVIDEO, 2053 .amux = EM28XX_AMUX_LINE_IN, 2054 .gpio = evga_indtube_analog, 2055 } }, 2056 }, 2057 /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 + 2058 Infineon TUA6034) */ 2059 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { 2060 .name = "Reddo DVB-C USB TV Box", 2061 .tuner_type = TUNER_ABSENT, 2062 .tuner_gpio = reddo_dvb_c_usb_box, 2063 .has_dvb = 1, 2064 }, 2065 /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold 2066 * initially as the KWorld PlusTV 340U, then as the UB435-Q. 2067 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */ 2068 [EM2870_BOARD_KWORLD_A340] = { 2069 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)", 2070 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 2071 .has_dvb = 1, 2072 .dvb_gpio = kworld_a340_digital, 2073 .tuner_gpio = default_tuner_gpio, 2074 }, 2075 /* 2013:024f PCTV nanoStick T2 290e. 2076 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */ 2077 [EM28174_BOARD_PCTV_290E] = { 2078 .name = "PCTV nanoStick T2 290e", 2079 .def_i2c_bus = 1, 2080 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, 2081 .tuner_type = TUNER_ABSENT, 2082 .tuner_gpio = pctv_290e, 2083 .has_dvb = 1, 2084 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2085 }, 2086 /* 2013:024f PCTV DVB-S2 Stick 460e 2087 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */ 2088 [EM28174_BOARD_PCTV_460E] = { 2089 .def_i2c_bus = 1, 2090 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2091 .name = "PCTV DVB-S2 Stick (460e)", 2092 .tuner_type = TUNER_ABSENT, 2093 .tuner_gpio = pctv_460e, 2094 .has_dvb = 1, 2095 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2096 }, 2097 /* eb1a:5006 Honestech VIDBOX NW03 2098 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */ 2099 [EM2860_BOARD_HT_VIDBOX_NW03] = { 2100 .name = "Honestech Vidbox NW03", 2101 .tuner_type = TUNER_ABSENT, 2102 .decoder = EM28XX_SAA711X, 2103 .input = { { 2104 .type = EM28XX_VMUX_COMPOSITE1, 2105 .vmux = SAA7115_COMPOSITE0, 2106 .amux = EM28XX_AMUX_LINE_IN, 2107 }, { 2108 .type = EM28XX_VMUX_SVIDEO, 2109 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */ 2110 .amux = EM28XX_AMUX_LINE_IN, 2111 } }, 2112 }, 2113 /* 1b80:e425 MaxMedia UB425-TC 2114 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */ 2115 [EM2874_BOARD_MAXMEDIA_UB425_TC] = { 2116 .name = "MaxMedia UB425-TC", 2117 .tuner_type = TUNER_ABSENT, 2118 .tuner_gpio = maxmedia_ub425_tc, 2119 .has_dvb = 1, 2120 .ir_codes = RC_MAP_REDDO, 2121 .def_i2c_bus = 1, 2122 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2123 EM28XX_I2C_FREQ_400_KHZ, 2124 }, 2125 /* 2304:0242 PCTV QuatroStick (510e) 2126 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ 2127 [EM2884_BOARD_PCTV_510E] = { 2128 .name = "PCTV QuatroStick (510e)", 2129 .tuner_type = TUNER_ABSENT, 2130 .tuner_gpio = pctv_510e, 2131 .has_dvb = 1, 2132 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2133 .def_i2c_bus = 1, 2134 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2135 EM28XX_I2C_FREQ_400_KHZ, 2136 }, 2137 /* 2013:0251 PCTV QuatroStick nano (520e) 2138 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ 2139 [EM2884_BOARD_PCTV_520E] = { 2140 .name = "PCTV QuatroStick nano (520e)", 2141 .tuner_type = TUNER_ABSENT, 2142 .tuner_gpio = pctv_520e, 2143 .has_dvb = 1, 2144 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2145 .def_i2c_bus = 1, 2146 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2147 EM28XX_I2C_FREQ_400_KHZ, 2148 }, 2149 [EM2884_BOARD_TERRATEC_HTC_USB_XS] = { 2150 .name = "Terratec Cinergy HTC USB XS", 2151 .has_dvb = 1, 2152 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 2153 .tuner_type = TUNER_ABSENT, 2154 .def_i2c_bus = 1, 2155 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2156 EM28XX_I2C_FREQ_400_KHZ, 2157 }, 2158 /* 1b80:e1cc Delock 61959 2159 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 2160 * mostly the same as MaxMedia UB-425-TC but different remote */ 2161 [EM2874_BOARD_DELOCK_61959] = { 2162 .name = "Delock 61959", 2163 .tuner_type = TUNER_ABSENT, 2164 .tuner_gpio = maxmedia_ub425_tc, 2165 .has_dvb = 1, 2166 .ir_codes = RC_MAP_DELOCK_61959, 2167 .def_i2c_bus = 1, 2168 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2169 EM28XX_I2C_FREQ_400_KHZ, 2170 }, 2171 /* 2172 * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2 2173 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2174 */ 2175 [EM2874_BOARD_KWORLD_UB435Q_V2] = { 2176 .name = "KWorld USB ATSC TV Stick UB435-Q V2", 2177 .tuner_type = TUNER_ABSENT, 2178 .has_dvb = 1, 2179 .dvb_gpio = kworld_a340_digital, 2180 .tuner_gpio = default_tuner_gpio, 2181 .def_i2c_bus = 1, 2182 }, 2183 /* 2184 * 1b80:e34c KWorld USB ATSC TV Stick UB435-Q V3 2185 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2186 */ 2187 [EM2874_BOARD_KWORLD_UB435Q_V3] = { 2188 .name = "KWorld USB ATSC TV Stick UB435-Q V3", 2189 .tuner_type = TUNER_ABSENT, 2190 .has_dvb = 1, 2191 .tuner_gpio = kworld_ub435q_v3_digital, 2192 .def_i2c_bus = 1, 2193 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2194 EM28XX_I2C_FREQ_100_KHZ, 2195 .leds = kworld_ub435q_v3_leds, 2196 }, 2197 [EM2874_BOARD_PCTV_HD_MINI_80E] = { 2198 .name = "Pinnacle PCTV HD Mini", 2199 .tuner_type = TUNER_ABSENT, 2200 .has_dvb = 1, 2201 .dvb_gpio = em2874_pctv_80e_digital, 2202 .decoder = EM28XX_NODECODER, 2203 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2204 .leds = pctv_80e_leds, 2205 }, 2206 /* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 2207 * Empia EM2765 + OmniVision OV2640 */ 2208 [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = { 2209 .name = "SpeedLink Vicious And Devine Laplace webcam", 2210 .xclk = EM28XX_XCLK_FREQUENCY_24MHZ, 2211 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2212 EM28XX_I2C_FREQ_100_KHZ, 2213 .def_i2c_bus = 1, 2214 .tuner_type = TUNER_ABSENT, 2215 .is_webcam = 1, 2216 .input = { { 2217 .type = EM28XX_VMUX_COMPOSITE1, 2218 .amux = EM28XX_AMUX_VIDEO, 2219 .gpio = speedlink_vad_laplace_reg_seq, 2220 } }, 2221 .buttons = speedlink_vad_laplace_buttons, 2222 .leds = speedlink_vad_laplace_leds, 2223 }, 2224 /* 2013:0258 PCTV DVB-S2 Stick (461e) 2225 * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 */ 2226 [EM28178_BOARD_PCTV_461E] = { 2227 .def_i2c_bus = 1, 2228 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2229 .name = "PCTV DVB-S2 Stick (461e)", 2230 .tuner_type = TUNER_ABSENT, 2231 .tuner_gpio = pctv_461e, 2232 .has_dvb = 1, 2233 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2234 }, 2235 /* 2013:025f PCTV tripleStick (292e). 2236 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157 */ 2237 [EM28178_BOARD_PCTV_292E] = { 2238 .name = "PCTV tripleStick (292e)", 2239 .def_i2c_bus = 1, 2240 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2241 .tuner_type = TUNER_ABSENT, 2242 .tuner_gpio = pctv_292e, 2243 .has_dvb = 1, 2244 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2245 }, 2246 }; 2247 EXPORT_SYMBOL_GPL(em28xx_boards); 2248 2249 const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); 2250 2251 /* table of devices that work with this driver */ 2252 struct usb_device_id em28xx_id_table[] = { 2253 { USB_DEVICE(0xeb1a, 0x2750), 2254 .driver_info = EM2750_BOARD_UNKNOWN }, 2255 { USB_DEVICE(0xeb1a, 0x2751), 2256 .driver_info = EM2750_BOARD_UNKNOWN }, 2257 { USB_DEVICE(0xeb1a, 0x2800), 2258 .driver_info = EM2800_BOARD_UNKNOWN }, 2259 { USB_DEVICE(0xeb1a, 0x2710), 2260 .driver_info = EM2820_BOARD_UNKNOWN }, 2261 { USB_DEVICE(0xeb1a, 0x2820), 2262 .driver_info = EM2820_BOARD_UNKNOWN }, 2263 { USB_DEVICE(0xeb1a, 0x2821), 2264 .driver_info = EM2820_BOARD_UNKNOWN }, 2265 { USB_DEVICE(0xeb1a, 0x2860), 2266 .driver_info = EM2820_BOARD_UNKNOWN }, 2267 { USB_DEVICE(0xeb1a, 0x2861), 2268 .driver_info = EM2820_BOARD_UNKNOWN }, 2269 { USB_DEVICE(0xeb1a, 0x2862), 2270 .driver_info = EM2820_BOARD_UNKNOWN }, 2271 { USB_DEVICE(0xeb1a, 0x2863), 2272 .driver_info = EM2820_BOARD_UNKNOWN }, 2273 { USB_DEVICE(0xeb1a, 0x2870), 2274 .driver_info = EM2820_BOARD_UNKNOWN }, 2275 { USB_DEVICE(0xeb1a, 0x2881), 2276 .driver_info = EM2820_BOARD_UNKNOWN }, 2277 { USB_DEVICE(0xeb1a, 0x2883), 2278 .driver_info = EM2820_BOARD_UNKNOWN }, 2279 { USB_DEVICE(0xeb1a, 0x2868), 2280 .driver_info = EM2820_BOARD_UNKNOWN }, 2281 { USB_DEVICE(0xeb1a, 0x2875), 2282 .driver_info = EM2820_BOARD_UNKNOWN }, 2283 { USB_DEVICE(0xeb1a, 0x2885), /* MSI Digivox Trio */ 2284 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2285 { USB_DEVICE(0xeb1a, 0xe300), 2286 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U }, 2287 { USB_DEVICE(0xeb1a, 0xe303), 2288 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 }, 2289 { USB_DEVICE(0xeb1a, 0xe305), 2290 .driver_info = EM2880_BOARD_KWORLD_DVB_305U }, 2291 { USB_DEVICE(0xeb1a, 0xe310), 2292 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, 2293 { USB_DEVICE(0xeb1a, 0xa313), 2294 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, 2295 { USB_DEVICE(0xeb1a, 0xa316), 2296 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, 2297 { USB_DEVICE(0xeb1a, 0xe320), 2298 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, 2299 { USB_DEVICE(0xeb1a, 0xe323), 2300 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT }, 2301 { USB_DEVICE(0xeb1a, 0xe350), 2302 .driver_info = EM2870_BOARD_KWORLD_350U }, 2303 { USB_DEVICE(0xeb1a, 0xe355), 2304 .driver_info = EM2870_BOARD_KWORLD_355U }, 2305 { USB_DEVICE(0xeb1a, 0x2801), 2306 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 }, 2307 { USB_DEVICE(0xeb1a, 0xe357), 2308 .driver_info = EM2870_BOARD_KWORLD_355U }, 2309 { USB_DEVICE(0xeb1a, 0xe359), 2310 .driver_info = EM2870_BOARD_KWORLD_355U }, 2311 { USB_DEVICE(0x1b80, 0xe302), 2312 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */ 2313 { USB_DEVICE(0x1b80, 0xe304), 2314 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */ 2315 { USB_DEVICE(0x0ccd, 0x0036), 2316 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, 2317 { USB_DEVICE(0x0ccd, 0x004c), 2318 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR }, 2319 { USB_DEVICE(0x0ccd, 0x004f), 2320 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS }, 2321 { USB_DEVICE(0x0ccd, 0x005e), 2322 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2323 { USB_DEVICE(0x0ccd, 0x0042), 2324 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2325 { USB_DEVICE(0x0ccd, 0x0043), 2326 .driver_info = EM2870_BOARD_TERRATEC_XS }, 2327 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */ 2328 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2329 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */ 2330 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2331 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */ 2332 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2333 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */ 2334 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2335 { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */ 2336 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2337 { USB_DEVICE(0x0ccd, 0x0084), 2338 .driver_info = EM2860_BOARD_TERRATEC_AV350 }, 2339 { USB_DEVICE(0x0ccd, 0x0096), 2340 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2341 { USB_DEVICE(0x0ccd, 0x10AF), 2342 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2343 { USB_DEVICE(0x0ccd, 0x00b2), 2344 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK }, 2345 { USB_DEVICE(0x0fd9, 0x0033), 2346 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE}, 2347 { USB_DEVICE(0x185b, 0x2870), 2348 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE }, 2349 { USB_DEVICE(0x185b, 0x2041), 2350 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU }, 2351 { USB_DEVICE(0x2040, 0x4200), 2352 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2353 { USB_DEVICE(0x2040, 0x4201), 2354 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2355 { USB_DEVICE(0x2040, 0x6500), 2356 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, 2357 { USB_DEVICE(0x2040, 0x6502), 2358 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 }, 2359 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */ 2360 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2361 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */ 2362 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2363 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */ 2364 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2365 { USB_DEVICE(0x2040, 0x651f), 2366 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 }, 2367 { USB_DEVICE(0x0438, 0xb002), 2368 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 }, 2369 { USB_DEVICE(0x2001, 0xf112), 2370 .driver_info = EM2820_BOARD_DLINK_USB_TV }, 2371 { USB_DEVICE(0x2304, 0x0207), 2372 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2373 { USB_DEVICE(0x2304, 0x0208), 2374 .driver_info = EM2820_BOARD_PINNACLE_USB_2 }, 2375 { USB_DEVICE(0x2304, 0x021a), 2376 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2377 { USB_DEVICE(0x2304, 0x0226), 2378 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E }, 2379 { USB_DEVICE(0x2304, 0x0227), 2380 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, 2381 { USB_DEVICE(0x2304, 0x023f), 2382 .driver_info = EM2874_BOARD_PCTV_HD_MINI_80E }, 2383 { USB_DEVICE(0x0413, 0x6023), 2384 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, 2385 { USB_DEVICE(0x093b, 0xa003), 2386 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2387 { USB_DEVICE(0x093b, 0xa005), 2388 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U }, 2389 { USB_DEVICE(0x04bb, 0x0515), 2390 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ }, 2391 { USB_DEVICE(0xeb1a, 0x50a6), 2392 .driver_info = EM2860_BOARD_GADMEI_UTV330 }, 2393 { USB_DEVICE(0x1b80, 0xa340), 2394 .driver_info = EM2870_BOARD_KWORLD_A340 }, 2395 { USB_DEVICE(0x1b80, 0xe346), 2396 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 }, 2397 { USB_DEVICE(0x1b80, 0xe34c), 2398 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V3 }, 2399 { USB_DEVICE(0x2013, 0x024f), 2400 .driver_info = EM28174_BOARD_PCTV_290E }, 2401 { USB_DEVICE(0x2013, 0x024c), 2402 .driver_info = EM28174_BOARD_PCTV_460E }, 2403 { USB_DEVICE(0x2040, 0x1605), 2404 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, 2405 { USB_DEVICE(0x1b80, 0xe755), 2406 .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO }, 2407 { USB_DEVICE(0xeb1a, 0x5006), 2408 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, 2409 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */ 2410 .driver_info = EM2860_BOARD_EASYCAP }, 2411 { USB_DEVICE(0x1b80, 0xe425), 2412 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC }, 2413 { USB_DEVICE(0x2304, 0x0242), 2414 .driver_info = EM2884_BOARD_PCTV_510E }, 2415 { USB_DEVICE(0x2013, 0x0251), 2416 .driver_info = EM2884_BOARD_PCTV_520E }, 2417 { USB_DEVICE(0x1b80, 0xe1cc), 2418 .driver_info = EM2874_BOARD_DELOCK_61959 }, 2419 { USB_DEVICE(0x1ae7, 0x9003), 2420 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2421 { USB_DEVICE(0x1ae7, 0x9004), 2422 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2423 { USB_DEVICE(0x2013, 0x0258), 2424 .driver_info = EM28178_BOARD_PCTV_461E }, 2425 { USB_DEVICE(0x2013, 0x025f), 2426 .driver_info = EM28178_BOARD_PCTV_292E }, 2427 { }, 2428 }; 2429 MODULE_DEVICE_TABLE(usb, em28xx_id_table); 2430 2431 /* 2432 * EEPROM hash table for devices with generic USB IDs 2433 */ 2434 static struct em28xx_hash_table em28xx_eeprom_hash[] = { 2435 /* P/N: SA 60002070465 Tuner: TVF7533-MF */ 2436 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, 2437 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, 2438 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, 2439 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, 2440 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, 2441 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, 2442 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT}, 2443 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028}, 2444 }; 2445 2446 /* I2C devicelist hash table for devices with generic USB IDs */ 2447 static struct em28xx_hash_table em28xx_i2c_hash[] = { 2448 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, 2449 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, 2450 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT}, 2451 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT}, 2452 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, 2453 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF}, 2454 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT}, 2455 }; 2456 /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */ 2457 2458 int em28xx_tuner_callback(void *ptr, int component, int command, int arg) 2459 { 2460 struct em28xx_i2c_bus *i2c_bus = ptr; 2461 struct em28xx *dev = i2c_bus->dev; 2462 int rc = 0; 2463 2464 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000) 2465 return 0; 2466 2467 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET) 2468 return 0; 2469 2470 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio); 2471 2472 return rc; 2473 } 2474 EXPORT_SYMBOL_GPL(em28xx_tuner_callback); 2475 2476 static inline void em28xx_set_model(struct em28xx *dev) 2477 { 2478 dev->board = em28xx_boards[dev->model]; 2479 2480 /* Those are the default values for the majority of boards 2481 Use those values if not specified otherwise at boards entry 2482 */ 2483 if (!dev->board.xclk) 2484 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE | 2485 EM28XX_XCLK_FREQUENCY_12MHZ; 2486 2487 if (!dev->board.i2c_speed) 2488 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2489 EM28XX_I2C_FREQ_100_KHZ; 2490 2491 /* Should be initialized early, for I2C to work */ 2492 dev->def_i2c_bus = dev->board.def_i2c_bus; 2493 } 2494 2495 /* Since em28xx_pre_card_setup() requires a proper dev->model, 2496 * this won't work for boards with generic PCI IDs 2497 */ 2498 static void em28xx_pre_card_setup(struct em28xx *dev) 2499 { 2500 /* Set the initial XCLK and I2C clock values based on the board 2501 definition */ 2502 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f); 2503 if (!dev->board.is_em2800) 2504 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); 2505 msleep(50); 2506 2507 /* request some modules */ 2508 switch (dev->model) { 2509 case EM2861_BOARD_PLEXTOR_PX_TV100U: 2510 /* Sets the msp34xx I2S speed */ 2511 dev->i2s_speed = 2048000; 2512 break; 2513 case EM2861_BOARD_KWORLD_PVRTV_300U: 2514 case EM2880_BOARD_KWORLD_DVB_305U: 2515 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d); 2516 msleep(10); 2517 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d); 2518 msleep(10); 2519 break; 2520 case EM2870_BOARD_COMPRO_VIDEOMATE: 2521 /* TODO: someone can do some cleanup here... 2522 not everything's needed */ 2523 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2524 msleep(10); 2525 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01); 2526 msleep(10); 2527 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2528 mdelay(70); 2529 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2530 mdelay(70); 2531 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc); 2532 mdelay(70); 2533 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2534 mdelay(70); 2535 break; 2536 case EM2870_BOARD_TERRATEC_XS_MT2060: 2537 /* this device needs some gpio writes to get the DVB-T 2538 demod work */ 2539 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2540 mdelay(70); 2541 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2542 mdelay(70); 2543 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2544 mdelay(70); 2545 break; 2546 case EM2870_BOARD_PINNACLE_PCTV_DVB: 2547 /* this device needs some gpio writes to get the 2548 DVB-T demod work */ 2549 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2550 mdelay(70); 2551 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2552 mdelay(70); 2553 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2554 mdelay(70); 2555 break; 2556 case EM2820_BOARD_GADMEI_UTV310: 2557 case EM2820_BOARD_MSI_VOX_USB_2: 2558 /* enables audio for that devices */ 2559 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2560 break; 2561 2562 case EM2882_BOARD_KWORLD_ATSC_315U: 2563 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 2564 msleep(10); 2565 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2566 msleep(10); 2567 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2568 msleep(10); 2569 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); 2570 msleep(10); 2571 break; 2572 2573 case EM2860_BOARD_KAIOMY_TVNPC_U2: 2574 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); 2575 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); 2576 em28xx_write_regs(dev, 0x0d, "\x42", 1); 2577 em28xx_write_regs(dev, 0x08, "\xfd", 1); 2578 msleep(10); 2579 em28xx_write_regs(dev, 0x08, "\xff", 1); 2580 msleep(10); 2581 em28xx_write_regs(dev, 0x08, "\x7f", 1); 2582 msleep(10); 2583 em28xx_write_regs(dev, 0x08, "\x6b", 1); 2584 2585 break; 2586 case EM2860_BOARD_EASYCAP: 2587 em28xx_write_regs(dev, 0x08, "\xf8", 1); 2588 break; 2589 2590 case EM2820_BOARD_IODATA_GVMVP_SZ: 2591 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 2592 msleep(70); 2593 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); 2594 msleep(10); 2595 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2596 msleep(70); 2597 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2598 msleep(70); 2599 break; 2600 } 2601 2602 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2603 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2604 2605 /* Unlock device */ 2606 em28xx_set_mode(dev, EM28XX_SUSPEND); 2607 } 2608 2609 static int em28xx_hint_board(struct em28xx *dev) 2610 { 2611 int i; 2612 2613 if (dev->board.is_webcam) { 2614 if (dev->em28xx_sensor == EM28XX_MT9V011) { 2615 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; 2616 } else if (dev->em28xx_sensor == EM28XX_MT9M001 || 2617 dev->em28xx_sensor == EM28XX_MT9M111) { 2618 dev->model = EM2750_BOARD_UNKNOWN; 2619 } 2620 /* FIXME: IMPROVE ! */ 2621 2622 return 0; 2623 } 2624 2625 /* HINT method: EEPROM 2626 * 2627 * This method works only for boards with eeprom. 2628 * Uses a hash of all eeprom bytes. The hash should be 2629 * unique for a vendor/tuner pair. 2630 * There are a high chance that tuners for different 2631 * video standards produce different hashes. 2632 */ 2633 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) { 2634 if (dev->hash == em28xx_eeprom_hash[i].hash) { 2635 dev->model = em28xx_eeprom_hash[i].model; 2636 dev->tuner_type = em28xx_eeprom_hash[i].tuner; 2637 2638 em28xx_errdev("Your board has no unique USB ID.\n"); 2639 em28xx_errdev("A hint were successfully done, " 2640 "based on eeprom hash.\n"); 2641 em28xx_errdev("This method is not 100%% failproof.\n"); 2642 em28xx_errdev("If the board were missdetected, " 2643 "please email this log to:\n"); 2644 em28xx_errdev("\tV4L Mailing List " 2645 " <linux-media@vger.kernel.org>\n"); 2646 em28xx_errdev("Board detected as %s\n", 2647 em28xx_boards[dev->model].name); 2648 2649 return 0; 2650 } 2651 } 2652 2653 /* HINT method: I2C attached devices 2654 * 2655 * This method works for all boards. 2656 * Uses a hash of i2c scanned devices. 2657 * Devices with the same i2c attached chips will 2658 * be considered equal. 2659 * This method is less precise than the eeprom one. 2660 */ 2661 2662 /* user did not request i2c scanning => do it now */ 2663 if (!dev->i2c_hash) 2664 em28xx_do_i2c_scan(dev, dev->def_i2c_bus); 2665 2666 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) { 2667 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) { 2668 dev->model = em28xx_i2c_hash[i].model; 2669 dev->tuner_type = em28xx_i2c_hash[i].tuner; 2670 em28xx_errdev("Your board has no unique USB ID.\n"); 2671 em28xx_errdev("A hint were successfully done, " 2672 "based on i2c devicelist hash.\n"); 2673 em28xx_errdev("This method is not 100%% failproof.\n"); 2674 em28xx_errdev("If the board were missdetected, " 2675 "please email this log to:\n"); 2676 em28xx_errdev("\tV4L Mailing List " 2677 " <linux-media@vger.kernel.org>\n"); 2678 em28xx_errdev("Board detected as %s\n", 2679 em28xx_boards[dev->model].name); 2680 2681 return 0; 2682 } 2683 } 2684 2685 em28xx_errdev("Your board has no unique USB ID and thus need a " 2686 "hint to be detected.\n"); 2687 em28xx_errdev("You may try to use card=<n> insmod option to " 2688 "workaround that.\n"); 2689 em28xx_errdev("Please send an email with this log to:\n"); 2690 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n"); 2691 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash); 2692 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash); 2693 2694 em28xx_errdev("Here is a list of valid choices for the card=<n>" 2695 " insmod option:\n"); 2696 for (i = 0; i < em28xx_bcount; i++) { 2697 em28xx_errdev(" card=%d -> %s\n", 2698 i, em28xx_boards[i].name); 2699 } 2700 return -1; 2701 } 2702 2703 static void em28xx_card_setup(struct em28xx *dev) 2704 { 2705 /* 2706 * If the device can be a webcam, seek for a sensor. 2707 * If sensor is not found, then it isn't a webcam. 2708 */ 2709 if (dev->board.is_webcam) { 2710 if (em28xx_detect_sensor(dev) < 0) 2711 dev->board.is_webcam = 0; 2712 } 2713 2714 switch (dev->model) { 2715 case EM2750_BOARD_UNKNOWN: 2716 case EM2820_BOARD_UNKNOWN: 2717 case EM2800_BOARD_UNKNOWN: 2718 /* 2719 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 2720 * 2721 * This occurs because they share identical USB vendor and 2722 * product IDs. 2723 * 2724 * What we do here is look up the EEPROM hash of the K-WORLD 2725 * and if it is found then we decide that we do not have 2726 * a DIGIVOX and reset the device to the K-WORLD instead. 2727 * 2728 * This solution is only valid if they do not share eeprom 2729 * hash identities which has not been determined as yet. 2730 */ 2731 if (em28xx_hint_board(dev) < 0) 2732 em28xx_errdev("Board not discovered\n"); 2733 else { 2734 em28xx_set_model(dev); 2735 em28xx_pre_card_setup(dev); 2736 } 2737 break; 2738 default: 2739 em28xx_set_model(dev); 2740 } 2741 2742 em28xx_info("Identified as %s (card=%d)\n", 2743 dev->board.name, dev->model); 2744 2745 dev->tuner_type = em28xx_boards[dev->model].tuner_type; 2746 2747 /* request some modules */ 2748 switch (dev->model) { 2749 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: 2750 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 2751 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 2752 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 2753 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 2754 case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: 2755 { 2756 struct tveeprom tv; 2757 2758 if (dev->eedata == NULL) 2759 break; 2760 #if defined(CONFIG_MODULES) && defined(MODULE) 2761 request_module("tveeprom"); 2762 #endif 2763 /* Call first TVeeprom */ 2764 2765 dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1; 2766 tveeprom_hauppauge_analog(&dev->i2c_client[dev->def_i2c_bus], &tv, dev->eedata); 2767 2768 dev->tuner_type = tv.tuner_type; 2769 2770 if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) { 2771 dev->i2s_speed = 2048000; 2772 dev->board.has_msp34xx = 1; 2773 } 2774 break; 2775 } 2776 case EM2882_BOARD_KWORLD_ATSC_315U: 2777 em28xx_write_reg(dev, 0x0d, 0x42); 2778 msleep(10); 2779 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2780 msleep(10); 2781 break; 2782 case EM2820_BOARD_KWORLD_PVRTV2800RF: 2783 /* GPIO enables sound on KWORLD PVR TV 2800RF */ 2784 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9); 2785 break; 2786 case EM2820_BOARD_UNKNOWN: 2787 case EM2800_BOARD_UNKNOWN: 2788 /* 2789 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 2790 * 2791 * This occurs because they share identical USB vendor and 2792 * product IDs. 2793 * 2794 * What we do here is look up the EEPROM hash of the K-WORLD 2795 * and if it is found then we decide that we do not have 2796 * a DIGIVOX and reset the device to the K-WORLD instead. 2797 * 2798 * This solution is only valid if they do not share eeprom 2799 * hash identities which has not been determined as yet. 2800 */ 2801 case EM2880_BOARD_MSI_DIGIVOX_AD: 2802 if (!em28xx_hint_board(dev)) 2803 em28xx_set_model(dev); 2804 2805 /* In cases where we had to use a board hint, the call to 2806 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 2807 so make the call now so the analog GPIOs are set properly 2808 before probing the i2c bus. */ 2809 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2810 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2811 break; 2812 2813 /* 2814 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR. 2815 * 2816 * This occurs because they share identical USB vendor and 2817 * product IDs. 2818 * 2819 * What we do here is look up the EEPROM hash of the Dikom 2820 * and if it is found then we decide that we do not have 2821 * a Kworld and reset the device to the Dikom instead. 2822 * 2823 * This solution is only valid if they do not share eeprom 2824 * hash identities which has not been determined as yet. 2825 */ 2826 case EM2882_BOARD_KWORLD_VS_DVBT: 2827 if (!em28xx_hint_board(dev)) 2828 em28xx_set_model(dev); 2829 2830 /* In cases where we had to use a board hint, the call to 2831 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 2832 so make the call now so the analog GPIOs are set properly 2833 before probing the i2c bus. */ 2834 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2835 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2836 break; 2837 } 2838 2839 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) { 2840 em28xx_errdev("\n\n"); 2841 em28xx_errdev("The support for this board weren't " 2842 "valid yet.\n"); 2843 em28xx_errdev("Please send a report of having this working\n"); 2844 em28xx_errdev("not to V4L mailing list (and/or to other " 2845 "addresses)\n\n"); 2846 } 2847 2848 /* Free eeprom data memory */ 2849 kfree(dev->eedata); 2850 dev->eedata = NULL; 2851 2852 /* Allow override tuner type by a module parameter */ 2853 if (tuner >= 0) 2854 dev->tuner_type = tuner; 2855 } 2856 2857 void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) 2858 { 2859 memset(ctl, 0, sizeof(*ctl)); 2860 2861 ctl->fname = XC2028_DEFAULT_FIRMWARE; 2862 ctl->max_len = 64; 2863 ctl->mts = em28xx_boards[dev->model].mts_firmware; 2864 2865 switch (dev->model) { 2866 case EM2880_BOARD_EMPIRE_DUAL_TV: 2867 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 2868 case EM2882_BOARD_TERRATEC_HYBRID_XS: 2869 ctl->demod = XC3028_FE_ZARLINK456; 2870 break; 2871 case EM2880_BOARD_TERRATEC_HYBRID_XS: 2872 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR: 2873 case EM2881_BOARD_PINNACLE_HYBRID_PRO: 2874 ctl->demod = XC3028_FE_ZARLINK456; 2875 break; 2876 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 2877 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: 2878 ctl->demod = XC3028_FE_DEFAULT; 2879 break; 2880 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: 2881 ctl->demod = XC3028_FE_DEFAULT; 2882 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 2883 break; 2884 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 2885 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 2886 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: 2887 /* FIXME: Better to specify the needed IF */ 2888 ctl->demod = XC3028_FE_DEFAULT; 2889 break; 2890 case EM2883_BOARD_KWORLD_HYBRID_330U: 2891 case EM2882_BOARD_DIKOM_DK300: 2892 case EM2882_BOARD_KWORLD_VS_DVBT: 2893 ctl->demod = XC3028_FE_CHINA; 2894 ctl->fname = XC2028_DEFAULT_FIRMWARE; 2895 break; 2896 case EM2882_BOARD_EVGA_INDTUBE: 2897 ctl->demod = XC3028_FE_CHINA; 2898 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 2899 break; 2900 default: 2901 ctl->demod = XC3028_FE_OREN538; 2902 } 2903 } 2904 EXPORT_SYMBOL_GPL(em28xx_setup_xc3028); 2905 2906 static void request_module_async(struct work_struct *work) 2907 { 2908 struct em28xx *dev = container_of(work, 2909 struct em28xx, request_module_wk); 2910 2911 /* 2912 * The em28xx extensions can be modules or builtin. If the 2913 * modules are already loaded or are built in, those extensions 2914 * can be initialised right now. Otherwise, the module init 2915 * code will do it. 2916 */ 2917 2918 /* 2919 * Devicdes with an audio-only interface also have a V4L/DVB/RC 2920 * interface. Don't register extensions twice on those devices. 2921 */ 2922 if (dev->is_audio_only) { 2923 #if defined(CONFIG_MODULES) && defined(MODULE) 2924 request_module("em28xx-alsa"); 2925 #endif 2926 return; 2927 } 2928 2929 em28xx_init_extension(dev); 2930 2931 #if defined(CONFIG_MODULES) && defined(MODULE) 2932 if (dev->has_video) 2933 request_module("em28xx-v4l"); 2934 if (dev->has_audio_class) 2935 request_module("snd-usb-audio"); 2936 else if (dev->has_alsa_audio) 2937 request_module("em28xx-alsa"); 2938 if (dev->board.has_dvb) 2939 request_module("em28xx-dvb"); 2940 if (dev->board.buttons || 2941 ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir)) 2942 request_module("em28xx-rc"); 2943 #endif /* CONFIG_MODULES */ 2944 } 2945 2946 static void request_modules(struct em28xx *dev) 2947 { 2948 INIT_WORK(&dev->request_module_wk, request_module_async); 2949 schedule_work(&dev->request_module_wk); 2950 } 2951 2952 static void flush_request_modules(struct em28xx *dev) 2953 { 2954 flush_work(&dev->request_module_wk); 2955 } 2956 2957 /* 2958 * em28xx_release_resources() 2959 * unregisters the v4l2,i2c and usb devices 2960 * called when the device gets disconnected or at module unload 2961 */ 2962 static void em28xx_release_resources(struct em28xx *dev) 2963 { 2964 /*FIXME: I2C IR should be disconnected */ 2965 2966 mutex_lock(&dev->lock); 2967 2968 if (dev->def_i2c_bus) 2969 em28xx_i2c_unregister(dev, 1); 2970 em28xx_i2c_unregister(dev, 0); 2971 2972 usb_put_dev(dev->udev); 2973 2974 /* Mark device as unused */ 2975 clear_bit(dev->devno, em28xx_devused); 2976 2977 mutex_unlock(&dev->lock); 2978 }; 2979 2980 /** 2981 * em28xx_free_device() - Free em28xx device 2982 * 2983 * @ref: struct kref for em28xx device 2984 * 2985 * This is called when all extensions and em28xx core unregisters a device 2986 */ 2987 void em28xx_free_device(struct kref *ref) 2988 { 2989 struct em28xx *dev = kref_to_dev(ref); 2990 2991 em28xx_info("Freeing device\n"); 2992 2993 if (!dev->disconnected) 2994 em28xx_release_resources(dev); 2995 2996 kfree(dev->alt_max_pkt_size_isoc); 2997 kfree(dev); 2998 } 2999 EXPORT_SYMBOL_GPL(em28xx_free_device); 3000 3001 /* 3002 * em28xx_init_dev() 3003 * allocates and inits the device structs, registers i2c bus and v4l device 3004 */ 3005 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, 3006 struct usb_interface *interface, 3007 int minor) 3008 { 3009 int retval; 3010 static const char *default_chip_name = "em28xx"; 3011 const char *chip_name = default_chip_name; 3012 3013 dev->udev = udev; 3014 mutex_init(&dev->ctrl_urb_lock); 3015 spin_lock_init(&dev->slock); 3016 3017 dev->em28xx_write_regs = em28xx_write_regs; 3018 dev->em28xx_read_reg = em28xx_read_reg; 3019 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len; 3020 dev->em28xx_write_regs_req = em28xx_write_regs_req; 3021 dev->em28xx_read_reg_req = em28xx_read_reg_req; 3022 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800; 3023 3024 em28xx_set_model(dev); 3025 3026 dev->wait_after_write = 5; 3027 3028 /* Based on the Chip ID, set the device configuration */ 3029 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); 3030 if (retval > 0) { 3031 dev->chip_id = retval; 3032 3033 switch (dev->chip_id) { 3034 case CHIP_ID_EM2800: 3035 chip_name = "em2800"; 3036 break; 3037 case CHIP_ID_EM2710: 3038 chip_name = "em2710"; 3039 break; 3040 case CHIP_ID_EM2750: 3041 chip_name = "em2750"; 3042 break; 3043 case CHIP_ID_EM2765: 3044 chip_name = "em2765"; 3045 dev->wait_after_write = 0; 3046 dev->is_em25xx = 1; 3047 dev->eeprom_addrwidth_16bit = 1; 3048 break; 3049 case CHIP_ID_EM2820: 3050 chip_name = "em2710/2820"; 3051 if (le16_to_cpu(dev->udev->descriptor.idVendor) 3052 == 0xeb1a) { 3053 __le16 idProd = dev->udev->descriptor.idProduct; 3054 if (le16_to_cpu(idProd) == 0x2710) 3055 chip_name = "em2710"; 3056 else if (le16_to_cpu(idProd) == 0x2820) 3057 chip_name = "em2820"; 3058 } 3059 /* NOTE: the em2820 is used in webcams, too ! */ 3060 break; 3061 case CHIP_ID_EM2840: 3062 chip_name = "em2840"; 3063 break; 3064 case CHIP_ID_EM2860: 3065 chip_name = "em2860"; 3066 break; 3067 case CHIP_ID_EM2870: 3068 chip_name = "em2870"; 3069 dev->wait_after_write = 0; 3070 break; 3071 case CHIP_ID_EM2874: 3072 chip_name = "em2874"; 3073 dev->wait_after_write = 0; 3074 dev->eeprom_addrwidth_16bit = 1; 3075 break; 3076 case CHIP_ID_EM28174: 3077 chip_name = "em28174"; 3078 dev->wait_after_write = 0; 3079 dev->eeprom_addrwidth_16bit = 1; 3080 break; 3081 case CHIP_ID_EM28178: 3082 chip_name = "em28178"; 3083 dev->wait_after_write = 0; 3084 dev->eeprom_addrwidth_16bit = 1; 3085 break; 3086 case CHIP_ID_EM2883: 3087 chip_name = "em2882/3"; 3088 dev->wait_after_write = 0; 3089 break; 3090 case CHIP_ID_EM2884: 3091 chip_name = "em2884"; 3092 dev->wait_after_write = 0; 3093 dev->eeprom_addrwidth_16bit = 1; 3094 break; 3095 default: 3096 printk(KERN_INFO DRIVER_NAME 3097 ": unknown em28xx chip ID (%d)\n", dev->chip_id); 3098 } 3099 } 3100 3101 if (dev->chip_id == CHIP_ID_EM2870 || 3102 dev->chip_id == CHIP_ID_EM2874 || 3103 dev->chip_id == CHIP_ID_EM28174 || 3104 dev->chip_id == CHIP_ID_EM28178) { 3105 /* Digital only device - don't load any alsa module */ 3106 dev->audio_mode.has_audio = false; 3107 dev->has_audio_class = false; 3108 dev->has_alsa_audio = false; 3109 } 3110 3111 if (chip_name != default_chip_name) 3112 printk(KERN_INFO DRIVER_NAME 3113 ": chip ID is %s\n", chip_name); 3114 3115 /* 3116 * For em2820/em2710, the name may change latter, after checking 3117 * if the device has a sensor (so, it is em2710) or not. 3118 */ 3119 snprintf(dev->name, sizeof(dev->name), "%s #%d", chip_name, dev->devno); 3120 3121 if (dev->is_audio_only) { 3122 retval = em28xx_audio_setup(dev); 3123 if (retval) 3124 return -ENODEV; 3125 em28xx_init_extension(dev); 3126 3127 return 0; 3128 } 3129 3130 em28xx_pre_card_setup(dev); 3131 3132 if (!dev->board.is_em2800) { 3133 /* Resets I2C speed */ 3134 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); 3135 if (retval < 0) { 3136 em28xx_errdev("%s: em28xx_write_reg failed!" 3137 " retval [%d]\n", 3138 __func__, retval); 3139 return retval; 3140 } 3141 } 3142 3143 rt_mutex_init(&dev->i2c_bus_lock); 3144 3145 /* register i2c bus 0 */ 3146 if (dev->board.is_em2800) 3147 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800); 3148 else 3149 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX); 3150 if (retval < 0) { 3151 em28xx_errdev("%s: em28xx_i2c_register bus 0 - error [%d]!\n", 3152 __func__, retval); 3153 return retval; 3154 } 3155 3156 /* register i2c bus 1 */ 3157 if (dev->def_i2c_bus) { 3158 if (dev->is_em25xx) 3159 retval = em28xx_i2c_register(dev, 1, 3160 EM28XX_I2C_ALGO_EM25XX_BUS_B); 3161 else 3162 retval = em28xx_i2c_register(dev, 1, 3163 EM28XX_I2C_ALGO_EM28XX); 3164 if (retval < 0) { 3165 em28xx_errdev("%s: em28xx_i2c_register bus 1 - error [%d]!\n", 3166 __func__, retval); 3167 3168 em28xx_i2c_unregister(dev, 0); 3169 3170 return retval; 3171 } 3172 } 3173 3174 /* Do board specific init and eeprom reading */ 3175 em28xx_card_setup(dev); 3176 3177 return 0; 3178 } 3179 3180 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ 3181 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) 3182 3183 /* 3184 * em28xx_usb_probe() 3185 * checks for supported devices 3186 */ 3187 static int em28xx_usb_probe(struct usb_interface *interface, 3188 const struct usb_device_id *id) 3189 { 3190 struct usb_device *udev; 3191 struct em28xx *dev = NULL; 3192 int retval; 3193 bool has_audio = false, has_video = false, has_dvb = false; 3194 int i, nr, try_bulk; 3195 const int ifnum = interface->altsetting[0].desc.bInterfaceNumber; 3196 char *speed; 3197 3198 udev = usb_get_dev(interface_to_usbdev(interface)); 3199 3200 /* Check to see next free device and mark as used */ 3201 do { 3202 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); 3203 if (nr >= EM28XX_MAXBOARDS) { 3204 /* No free device slots */ 3205 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n", 3206 EM28XX_MAXBOARDS); 3207 retval = -ENOMEM; 3208 goto err_no_slot; 3209 } 3210 } while (test_and_set_bit(nr, em28xx_devused)); 3211 3212 /* Don't register audio interfaces */ 3213 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3214 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): " 3215 "interface %i, class %i\n", 3216 le16_to_cpu(udev->descriptor.idVendor), 3217 le16_to_cpu(udev->descriptor.idProduct), 3218 ifnum, 3219 interface->altsetting[0].desc.bInterfaceClass); 3220 3221 retval = -ENODEV; 3222 goto err; 3223 } 3224 3225 /* allocate memory for our device state and initialize it */ 3226 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 3227 if (dev == NULL) { 3228 em28xx_err(DRIVER_NAME ": out of memory!\n"); 3229 retval = -ENOMEM; 3230 goto err; 3231 } 3232 3233 /* compute alternate max packet sizes */ 3234 dev->alt_max_pkt_size_isoc = 3235 kmalloc(sizeof(dev->alt_max_pkt_size_isoc[0]) * 3236 interface->num_altsetting, GFP_KERNEL); 3237 if (dev->alt_max_pkt_size_isoc == NULL) { 3238 em28xx_errdev("out of memory!\n"); 3239 kfree(dev); 3240 retval = -ENOMEM; 3241 goto err; 3242 } 3243 3244 /* Get endpoints */ 3245 for (i = 0; i < interface->num_altsetting; i++) { 3246 int ep; 3247 3248 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) { 3249 const struct usb_endpoint_descriptor *e; 3250 int sizedescr, size; 3251 3252 e = &interface->altsetting[i].endpoint[ep].desc; 3253 3254 sizedescr = le16_to_cpu(e->wMaxPacketSize); 3255 size = sizedescr & 0x7ff; 3256 3257 if (udev->speed == USB_SPEED_HIGH) 3258 size = size * hb_mult(sizedescr); 3259 3260 if (usb_endpoint_dir_in(e)) { 3261 switch (e->bEndpointAddress) { 3262 case 0x82: 3263 has_video = true; 3264 if (usb_endpoint_xfer_isoc(e)) { 3265 dev->analog_ep_isoc = 3266 e->bEndpointAddress; 3267 dev->alt_max_pkt_size_isoc[i] = size; 3268 } else if (usb_endpoint_xfer_bulk(e)) { 3269 dev->analog_ep_bulk = 3270 e->bEndpointAddress; 3271 } 3272 break; 3273 case 0x83: 3274 if (usb_endpoint_xfer_isoc(e)) { 3275 has_audio = true; 3276 } else { 3277 printk(KERN_INFO DRIVER_NAME 3278 ": error: skipping audio endpoint 0x83, because it uses bulk transfers !\n"); 3279 } 3280 break; 3281 case 0x84: 3282 if (has_video && 3283 (usb_endpoint_xfer_bulk(e))) { 3284 dev->analog_ep_bulk = 3285 e->bEndpointAddress; 3286 } else { 3287 if (usb_endpoint_xfer_isoc(e)) { 3288 if (size > dev->dvb_max_pkt_size_isoc) { 3289 has_dvb = true; /* see NOTE (~) */ 3290 dev->dvb_ep_isoc = e->bEndpointAddress; 3291 dev->dvb_max_pkt_size_isoc = size; 3292 dev->dvb_alt_isoc = i; 3293 } 3294 } else { 3295 has_dvb = true; 3296 dev->dvb_ep_bulk = e->bEndpointAddress; 3297 } 3298 } 3299 break; 3300 } 3301 } 3302 /* NOTE: 3303 * Old logic with support for isoc transfers only was: 3304 * 0x82 isoc => analog 3305 * 0x83 isoc => audio 3306 * 0x84 isoc => digital 3307 * 3308 * New logic with support for bulk transfers 3309 * 0x82 isoc => analog 3310 * 0x82 bulk => analog 3311 * 0x83 isoc* => audio 3312 * 0x84 isoc => digital 3313 * 0x84 bulk => analog or digital** 3314 * (*: audio should always be isoc) 3315 * (**: analog, if ep 0x82 is isoc, otherwise digital) 3316 * 3317 * The new logic preserves backwards compatibility and 3318 * reflects the endpoint configurations we have seen 3319 * so far. But there might be devices for which this 3320 * logic is not sufficient... 3321 */ 3322 /* 3323 * NOTE (~): some manufacturers (e.g. Terratec) disable 3324 * endpoints by setting wMaxPacketSize to 0 bytes for 3325 * all alt settings. So far, we've seen this for 3326 * DVB isoc endpoints only. 3327 */ 3328 } 3329 } 3330 3331 if (!(has_audio || has_video || has_dvb)) { 3332 retval = -ENODEV; 3333 goto err_free; 3334 } 3335 3336 switch (udev->speed) { 3337 case USB_SPEED_LOW: 3338 speed = "1.5"; 3339 break; 3340 case USB_SPEED_UNKNOWN: 3341 case USB_SPEED_FULL: 3342 speed = "12"; 3343 break; 3344 case USB_SPEED_HIGH: 3345 speed = "480"; 3346 break; 3347 default: 3348 speed = "unknown"; 3349 } 3350 3351 printk(KERN_INFO DRIVER_NAME 3352 ": New device %s %s @ %s Mbps " 3353 "(%04x:%04x, interface %d, class %d)\n", 3354 udev->manufacturer ? udev->manufacturer : "", 3355 udev->product ? udev->product : "", 3356 speed, 3357 le16_to_cpu(udev->descriptor.idVendor), 3358 le16_to_cpu(udev->descriptor.idProduct), 3359 ifnum, 3360 interface->altsetting->desc.bInterfaceNumber); 3361 3362 /* 3363 * Make sure we have 480 Mbps of bandwidth, otherwise things like 3364 * video stream wouldn't likely work, since 12 Mbps is generally 3365 * not enough even for most Digital TV streams. 3366 */ 3367 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { 3368 printk(DRIVER_NAME ": Device initialization failed.\n"); 3369 printk(DRIVER_NAME ": Device must be connected to a high-speed" 3370 " USB 2.0 port.\n"); 3371 retval = -ENODEV; 3372 goto err_free; 3373 } 3374 3375 dev->devno = nr; 3376 dev->model = id->driver_info; 3377 dev->alt = -1; 3378 dev->is_audio_only = has_audio && !(has_video || has_dvb); 3379 dev->has_alsa_audio = has_audio; 3380 dev->audio_mode.has_audio = has_audio; 3381 dev->has_video = has_video; 3382 dev->ifnum = ifnum; 3383 3384 /* Checks if audio is provided by some interface */ 3385 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) { 3386 struct usb_interface *uif = udev->config->interface[i]; 3387 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3388 dev->has_audio_class = 1; 3389 break; 3390 } 3391 } 3392 3393 if (has_audio) 3394 printk(KERN_INFO DRIVER_NAME 3395 ": Audio interface %i found %s\n", 3396 ifnum, 3397 dev->has_audio_class ? "(USB Audio Class)" : "(Vendor Class)"); 3398 if (has_video) 3399 printk(KERN_INFO DRIVER_NAME 3400 ": Video interface %i found:%s%s\n", 3401 ifnum, 3402 dev->analog_ep_bulk ? " bulk" : "", 3403 dev->analog_ep_isoc ? " isoc" : ""); 3404 if (has_dvb) 3405 printk(KERN_INFO DRIVER_NAME 3406 ": DVB interface %i found:%s%s\n", 3407 ifnum, 3408 dev->dvb_ep_bulk ? " bulk" : "", 3409 dev->dvb_ep_isoc ? " isoc" : ""); 3410 3411 dev->num_alt = interface->num_altsetting; 3412 3413 if ((unsigned)card[nr] < em28xx_bcount) 3414 dev->model = card[nr]; 3415 3416 /* save our data pointer in this interface device */ 3417 usb_set_intfdata(interface, dev); 3418 3419 /* allocate device struct */ 3420 mutex_init(&dev->lock); 3421 retval = em28xx_init_dev(dev, udev, interface, nr); 3422 if (retval) { 3423 goto err_free; 3424 } 3425 3426 if (usb_xfer_mode < 0) { 3427 if (dev->board.is_webcam) 3428 try_bulk = 1; 3429 else 3430 try_bulk = 0; 3431 } else { 3432 try_bulk = usb_xfer_mode > 0; 3433 } 3434 3435 /* Select USB transfer types to use */ 3436 if (has_video) { 3437 if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) 3438 dev->analog_xfer_bulk = 1; 3439 em28xx_info("analog set to %s mode.\n", 3440 dev->analog_xfer_bulk ? "bulk" : "isoc"); 3441 } 3442 if (has_dvb) { 3443 if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) 3444 dev->dvb_xfer_bulk = 1; 3445 em28xx_info("dvb set to %s mode.\n", 3446 dev->dvb_xfer_bulk ? "bulk" : "isoc"); 3447 } 3448 3449 kref_init(&dev->ref); 3450 3451 request_modules(dev); 3452 3453 /* Should be the last thing to do, to avoid newer udev's to 3454 open the device before fully initializing it 3455 */ 3456 3457 return 0; 3458 3459 err_free: 3460 kfree(dev->alt_max_pkt_size_isoc); 3461 kfree(dev); 3462 3463 err: 3464 clear_bit(nr, em28xx_devused); 3465 3466 err_no_slot: 3467 usb_put_dev(udev); 3468 return retval; 3469 } 3470 3471 /* 3472 * em28xx_usb_disconnect() 3473 * called when the device gets disconnected 3474 * video device will be unregistered on v4l2_close in case it is still open 3475 */ 3476 static void em28xx_usb_disconnect(struct usb_interface *interface) 3477 { 3478 struct em28xx *dev; 3479 3480 dev = usb_get_intfdata(interface); 3481 usb_set_intfdata(interface, NULL); 3482 3483 if (!dev) 3484 return; 3485 3486 dev->disconnected = 1; 3487 3488 em28xx_info("Disconnecting %s\n", dev->name); 3489 3490 flush_request_modules(dev); 3491 3492 em28xx_close_extension(dev); 3493 3494 em28xx_release_resources(dev); 3495 kref_put(&dev->ref, em28xx_free_device); 3496 } 3497 3498 static int em28xx_usb_suspend(struct usb_interface *interface, 3499 pm_message_t message) 3500 { 3501 struct em28xx *dev; 3502 3503 dev = usb_get_intfdata(interface); 3504 if (!dev) 3505 return 0; 3506 em28xx_suspend_extension(dev); 3507 return 0; 3508 } 3509 3510 static int em28xx_usb_resume(struct usb_interface *interface) 3511 { 3512 struct em28xx *dev; 3513 3514 dev = usb_get_intfdata(interface); 3515 if (!dev) 3516 return 0; 3517 em28xx_resume_extension(dev); 3518 return 0; 3519 } 3520 3521 static struct usb_driver em28xx_usb_driver = { 3522 .name = "em28xx", 3523 .probe = em28xx_usb_probe, 3524 .disconnect = em28xx_usb_disconnect, 3525 .suspend = em28xx_usb_suspend, 3526 .resume = em28xx_usb_resume, 3527 .id_table = em28xx_id_table, 3528 }; 3529 3530 module_usb_driver(em28xx_usb_driver); 3531