1 /* 2 em28xx-cards.c - driver for Empia EM2800/EM2820/2840 USB 3 video capture devices 4 5 Copyright (C) 2005 Ludovico Cavedon <cavedon@sssup.it> 6 Markus Rechberger <mrechberger@gmail.com> 7 Mauro Carvalho Chehab <mchehab@infradead.org> 8 Sascha Sommer <saschasommer@freenet.de> 9 Copyright (C) 2012 Frank Schäfer <fschaefer.oss@googlemail.com> 10 11 This program is free software; you can redistribute it and/or modify 12 it under the terms of the GNU General Public License as published by 13 the Free Software Foundation; either version 2 of the License, or 14 (at your option) any later version. 15 16 This program is distributed in the hope that it will be useful, 17 but WITHOUT ANY WARRANTY; without even the implied warranty of 18 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 GNU General Public License for more details. 20 21 You should have received a copy of the GNU General Public License 22 along with this program; if not, write to the Free Software 23 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 24 */ 25 26 #include <linux/init.h> 27 #include <linux/module.h> 28 #include <linux/slab.h> 29 #include <linux/delay.h> 30 #include <linux/i2c.h> 31 #include <linux/usb.h> 32 #include <media/tuner.h> 33 #include <media/drv-intf/msp3400.h> 34 #include <media/i2c/saa7115.h> 35 #include <dt-bindings/media/tvp5150.h> 36 #include <media/i2c/tvaudio.h> 37 #include <media/i2c-addr.h> 38 #include <media/tveeprom.h> 39 #include <media/v4l2-common.h> 40 #include <sound/ac97_codec.h> 41 42 #include "em28xx.h" 43 44 #define DRIVER_NAME "em28xx" 45 46 static int tuner = -1; 47 module_param(tuner, int, 0444); 48 MODULE_PARM_DESC(tuner, "tuner type"); 49 50 static unsigned int disable_ir; 51 module_param(disable_ir, int, 0444); 52 MODULE_PARM_DESC(disable_ir, "disable infrared remote support"); 53 54 static unsigned int disable_usb_speed_check; 55 module_param(disable_usb_speed_check, int, 0444); 56 MODULE_PARM_DESC(disable_usb_speed_check, 57 "override min bandwidth requirement of 480M bps"); 58 59 static unsigned int card[] = {[0 ... (EM28XX_MAXBOARDS - 1)] = -1U }; 60 module_param_array(card, int, NULL, 0444); 61 MODULE_PARM_DESC(card, "card type"); 62 63 static int usb_xfer_mode = -1; 64 module_param(usb_xfer_mode, int, 0444); 65 MODULE_PARM_DESC(usb_xfer_mode, 66 "USB transfer mode for frame data (-1 = auto, 0 = prefer isoc, 1 = prefer bulk)"); 67 68 /* Bitmask marking allocated devices from 0 to EM28XX_MAXBOARDS - 1 */ 69 static DECLARE_BITMAP(em28xx_devused, EM28XX_MAXBOARDS); 70 71 struct em28xx_hash_table { 72 unsigned long hash; 73 unsigned int model; 74 unsigned int tuner; 75 }; 76 77 static void em28xx_pre_card_setup(struct em28xx *dev); 78 79 /* 80 * Reset sequences for analog/digital modes 81 */ 82 83 /* Reset for the most [analog] boards */ 84 static struct em28xx_reg_seq default_analog[] = { 85 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 86 { -1, -1, -1, -1}, 87 }; 88 89 /* Reset for the most [digital] boards */ 90 static struct em28xx_reg_seq default_digital[] = { 91 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 92 { -1, -1, -1, -1}, 93 }; 94 95 /* Board Hauppauge WinTV HVR 900 analog */ 96 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_analog[] = { 97 {EM2820_R08_GPIO_CTRL, 0x2d, ~EM_GPIO_4, 10}, 98 { 0x05, 0xff, 0x10, 10}, 99 { -1, -1, -1, -1}, 100 }; 101 102 /* Board Hauppauge WinTV HVR 900 digital */ 103 static struct em28xx_reg_seq hauppauge_wintv_hvr_900_digital[] = { 104 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 105 {EM2880_R04_GPO, 0x04, 0x0f, 10}, 106 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 107 { -1, -1, -1, -1}, 108 }; 109 110 /* Board Hauppauge WinTV HVR 900 (R2) digital */ 111 static struct em28xx_reg_seq hauppauge_wintv_hvr_900R2_digital[] = { 112 {EM2820_R08_GPIO_CTRL, 0x2e, ~EM_GPIO_4, 10}, 113 {EM2880_R04_GPO, 0x0c, 0x0f, 10}, 114 { -1, -1, -1, -1}, 115 }; 116 117 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 118 static struct em28xx_reg_seq em2880_msi_digivox_ad_analog[] = { 119 {EM2820_R08_GPIO_CTRL, 0x69, ~EM_GPIO_4, 10}, 120 { -1, -1, -1, -1}, 121 }; 122 123 /* Boards - EM2880 MSI DIGIVOX AD and EM2880_BOARD_MSI_DIGIVOX_AD_II */ 124 125 /* Board - EM2870 Kworld 355u 126 Analog - No input analog */ 127 128 /* Board - EM2882 Kworld 315U digital */ 129 static struct em28xx_reg_seq em2882_kworld_315u_digital[] = { 130 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 131 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 132 {EM2880_R04_GPO, 0x04, 0xff, 10}, 133 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 134 {EM2820_R08_GPIO_CTRL, 0x7e, 0xff, 10}, 135 { -1, -1, -1, -1}, 136 }; 137 138 static struct em28xx_reg_seq em2882_kworld_315u_tuner_gpio[] = { 139 {EM2880_R04_GPO, 0x08, 0xff, 10}, 140 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 141 {EM2880_R04_GPO, 0x08, 0xff, 10}, 142 {EM2880_R04_GPO, 0x0c, 0xff, 10}, 143 { -1, -1, -1, -1}, 144 }; 145 146 static struct em28xx_reg_seq kworld_330u_analog[] = { 147 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 148 {EM2880_R04_GPO, 0x00, 0xff, 10}, 149 { -1, -1, -1, -1}, 150 }; 151 152 static struct em28xx_reg_seq kworld_330u_digital[] = { 153 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 154 {EM2880_R04_GPO, 0x08, 0xff, 10}, 155 { -1, -1, -1, -1}, 156 }; 157 158 /* Evga inDtube 159 GPIO0 - Enable digital power (s5h1409) - low to enable 160 GPIO1 - Enable analog power (tvp5150/emp202) - low to enable 161 GPIO4 - xc3028 reset 162 GOP3 - s5h1409 reset 163 */ 164 static struct em28xx_reg_seq evga_indtube_analog[] = { 165 {EM2820_R08_GPIO_CTRL, 0x79, 0xff, 60}, 166 { -1, -1, -1, -1}, 167 }; 168 169 static struct em28xx_reg_seq evga_indtube_digital[] = { 170 {EM2820_R08_GPIO_CTRL, 0x7a, 0xff, 1}, 171 {EM2880_R04_GPO, 0x04, 0xff, 10}, 172 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 173 { -1, -1, -1, -1}, 174 }; 175 176 /* 177 * KWorld PlusTV 340U, UB435-Q and UB435-Q V2 (ATSC) GPIOs map: 178 * EM_GPIO_0 - currently unknown 179 * EM_GPIO_1 - LED disable/enable (1 = off, 0 = on) 180 * EM_GPIO_2 - currently unknown 181 * EM_GPIO_3 - currently unknown 182 * EM_GPIO_4 - TDA18271HD/C1 tuner (1 = active, 0 = in reset) 183 * EM_GPIO_5 - LGDT3304 ATSC/QAM demod (1 = active, 0 = in reset) 184 * EM_GPIO_6 - currently unknown 185 * EM_GPIO_7 - currently unknown 186 */ 187 static struct em28xx_reg_seq kworld_a340_digital[] = { 188 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 189 { -1, -1, -1, -1}, 190 }; 191 192 static struct em28xx_reg_seq kworld_ub435q_v3_digital[] = { 193 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 100}, 194 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, 195 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 100}, 196 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 100}, 197 { -1, -1, -1, -1}, 198 }; 199 200 /* Pinnacle Hybrid Pro eb1a:2881 */ 201 static struct em28xx_reg_seq pinnacle_hybrid_pro_analog[] = { 202 {EM2820_R08_GPIO_CTRL, 0xfd, ~EM_GPIO_4, 10}, 203 { -1, -1, -1, -1}, 204 }; 205 206 static struct em28xx_reg_seq pinnacle_hybrid_pro_digital[] = { 207 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 208 {EM2880_R04_GPO, 0x04, 0xff, 100},/* zl10353 reset */ 209 {EM2880_R04_GPO, 0x0c, 0xff, 1}, 210 { -1, -1, -1, -1}, 211 }; 212 213 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_analog[] = { 214 {EM2820_R08_GPIO_CTRL, 0x6d, ~EM_GPIO_4, 10}, 215 {EM2880_R04_GPO, 0x00, 0xff, 10}, 216 { -1, -1, -1, -1}, 217 }; 218 219 static struct em28xx_reg_seq terratec_cinergy_USB_XS_FR_digital[] = { 220 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 221 {EM2880_R04_GPO, 0x08, 0xff, 10}, 222 { -1, -1, -1, -1}, 223 }; 224 225 /* PCTV HD Mini (80e) GPIOs 226 0-5: not used 227 6: demod reset, active low 228 7: LED on, active high */ 229 static struct em28xx_reg_seq em2874_pctv_80e_digital[] = { 230 {EM28XX_R06_I2C_CLK, 0x45, 0xff, 10}, /*400 KHz*/ 231 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 100},/*Demod reset*/ 232 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 10}, 233 { -1, -1, -1, -1}, 234 }; 235 236 /* eb1a:2868 Reddo DVB-C USB TV Box 237 GPIO4 - CU1216L NIM 238 Other GPIOs seems to be don't care. */ 239 static struct em28xx_reg_seq reddo_dvb_c_usb_box[] = { 240 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 241 {EM2820_R08_GPIO_CTRL, 0xde, 0xff, 10}, 242 {EM2820_R08_GPIO_CTRL, 0xfe, 0xff, 10}, 243 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 244 {EM2820_R08_GPIO_CTRL, 0x7f, 0xff, 10}, 245 {EM2820_R08_GPIO_CTRL, 0x6f, 0xff, 10}, 246 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 247 { -1, -1, -1, -1}, 248 }; 249 250 /* Callback for the most boards */ 251 static struct em28xx_reg_seq default_tuner_gpio[] = { 252 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 253 {EM2820_R08_GPIO_CTRL, 0, EM_GPIO_4, 10}, 254 {EM2820_R08_GPIO_CTRL, EM_GPIO_4, EM_GPIO_4, 10}, 255 { -1, -1, -1, -1}, 256 }; 257 258 /* Mute/unmute */ 259 static struct em28xx_reg_seq compro_unmute_tv_gpio[] = { 260 {EM2820_R08_GPIO_CTRL, 5, 7, 10}, 261 { -1, -1, -1, -1}, 262 }; 263 264 static struct em28xx_reg_seq compro_unmute_svid_gpio[] = { 265 {EM2820_R08_GPIO_CTRL, 4, 7, 10}, 266 { -1, -1, -1, -1}, 267 }; 268 269 static struct em28xx_reg_seq compro_mute_gpio[] = { 270 {EM2820_R08_GPIO_CTRL, 6, 7, 10}, 271 { -1, -1, -1, -1}, 272 }; 273 274 /* Terratec AV350 */ 275 static struct em28xx_reg_seq terratec_av350_mute_gpio[] = { 276 {EM2820_R08_GPIO_CTRL, 0xff, 0x7f, 10}, 277 { -1, -1, -1, -1}, 278 }; 279 280 static struct em28xx_reg_seq terratec_av350_unmute_gpio[] = { 281 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 282 { -1, -1, -1, -1}, 283 }; 284 285 static struct em28xx_reg_seq silvercrest_reg_seq[] = { 286 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 287 {EM2820_R08_GPIO_CTRL, 0x01, 0xf7, 10}, 288 { -1, -1, -1, -1}, 289 }; 290 291 static struct em28xx_reg_seq vc211a_enable[] = { 292 {EM2820_R08_GPIO_CTRL, 0xff, 0x07, 10}, 293 {EM2820_R08_GPIO_CTRL, 0xff, 0x0f, 10}, 294 {EM2820_R08_GPIO_CTRL, 0xff, 0x0b, 10}, 295 { -1, -1, -1, -1}, 296 }; 297 298 static struct em28xx_reg_seq dikom_dk300_digital[] = { 299 {EM2820_R08_GPIO_CTRL, 0x6e, ~EM_GPIO_4, 10}, 300 {EM2880_R04_GPO, 0x08, 0xff, 10}, 301 { -1, -1, -1, -1}, 302 }; 303 304 /* Reset for the most [digital] boards */ 305 static struct em28xx_reg_seq leadership_digital[] = { 306 {EM2874_R80_GPIO_P0_CTRL, 0x70, 0xff, 10}, 307 { -1, -1, -1, -1}, 308 }; 309 310 static struct em28xx_reg_seq leadership_reset[] = { 311 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 312 {EM2874_R80_GPIO_P0_CTRL, 0xb0, 0xff, 10}, 313 {EM2874_R80_GPIO_P0_CTRL, 0xf0, 0xff, 10}, 314 { -1, -1, -1, -1}, 315 }; 316 317 /* 2013:024f PCTV nanoStick T2 290e 318 * GPIO_6 - demod reset 319 * GPIO_7 - LED 320 */ 321 static struct em28xx_reg_seq pctv_290e[] = { 322 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 80}, 323 {EM2874_R80_GPIO_P0_CTRL, 0x40, 0xff, 80}, /* GPIO_6 = 1 */ 324 {EM2874_R80_GPIO_P0_CTRL, 0xc0, 0xff, 80}, /* GPIO_7 = 1 */ 325 { -1, -1, -1, -1}, 326 }; 327 328 #if 0 329 static struct em28xx_reg_seq terratec_h5_gpio[] = { 330 {EM2820_R08_GPIO_CTRL, 0xff, 0xff, 10}, 331 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 100}, 332 {EM2874_R80_GPIO_P0_CTRL, 0xf2, 0xff, 50}, 333 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 50}, 334 { -1, -1, -1, -1}, 335 }; 336 337 static struct em28xx_reg_seq terratec_h5_digital[] = { 338 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 339 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 340 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 341 { -1, -1, -1, -1}, 342 }; 343 #endif 344 345 /* 2013:024f PCTV DVB-S2 Stick 460e 346 * GPIO_0 - POWER_ON 347 * GPIO_1 - BOOST 348 * GPIO_2 - VUV_LNB (red LED) 349 * GPIO_3 - EXT_12V 350 * GPIO_4 - INT_DEM (DEMOD GPIO_0) 351 * GPIO_5 - INT_LNB 352 * GPIO_6 - RESET_DEM 353 * GPIO_7 - LED (green LED) 354 */ 355 static struct em28xx_reg_seq pctv_460e[] = { 356 {EM2874_R80_GPIO_P0_CTRL, 0x01, 0xff, 50}, 357 { 0x0d, 0xff, 0xff, 50}, 358 {EM2874_R80_GPIO_P0_CTRL, 0x41, 0xff, 50}, /* GPIO_6=1 */ 359 { 0x0d, 0x42, 0xff, 50}, 360 {EM2874_R80_GPIO_P0_CTRL, 0x61, 0xff, 50}, /* GPIO_5=1 */ 361 { -1, -1, -1, -1}, 362 }; 363 364 static struct em28xx_reg_seq c3tech_digital_duo_digital[] = { 365 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 366 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, /* xc5000 reset */ 367 {EM2874_R80_GPIO_P0_CTRL, 0xf9, 0xff, 35}, 368 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 10}, 369 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 10}, 370 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 10}, 371 {EM2874_R80_GPIO_P0_CTRL, 0xbe, 0xff, 10}, 372 {EM2874_R80_GPIO_P0_CTRL, 0xfe, 0xff, 20}, 373 { -1, -1, -1, -1}, 374 }; 375 376 /* 377 * 2013:0258 PCTV DVB-S2 Stick (461e) 378 * GPIO 0 = POWER_ON 379 * GPIO 1 = BOOST 380 * GPIO 2 = VUV_LNB (red LED) 381 * GPIO 3 = #EXT_12V 382 * GPIO 4 = INT_DEM 383 * GPIO 5 = INT_LNB 384 * GPIO 6 = #RESET_DEM 385 * GPIO 7 = P07_LED (green LED) 386 */ 387 static struct em28xx_reg_seq pctv_461e[] = { 388 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 0}, 389 {0x0d, 0xff, 0xff, 0}, 390 {EM2874_R80_GPIO_P0_CTRL, 0x3f, 0xff, 100}, /* reset demod */ 391 {EM2874_R80_GPIO_P0_CTRL, 0x7f, 0xff, 200}, /* reset demod */ 392 {0x0d, 0x42, 0xff, 0}, 393 {EM2874_R80_GPIO_P0_CTRL, 0xeb, 0xff, 0}, 394 {EM2874_R5F_TS_ENABLE, 0x84, 0x84, 0}, /* parallel? | null discard */ 395 { -1, -1, -1, -1}, 396 }; 397 398 #if 0 399 static struct em28xx_reg_seq hauppauge_930c_gpio[] = { 400 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 401 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, /* xc5000 reset */ 402 {EM2874_R80_GPIO_P0_CTRL, 0x6f, 0xff, 10}, 403 {EM2874_R80_GPIO_P0_CTRL, 0x4f, 0xff, 10}, 404 { -1, -1, -1, -1}, 405 }; 406 407 static struct em28xx_reg_seq hauppauge_930c_digital[] = { 408 {EM2874_R80_GPIO_P0_CTRL, 0xf6, 0xff, 10}, 409 {EM2874_R80_GPIO_P0_CTRL, 0xe6, 0xff, 100}, 410 {EM2874_R80_GPIO_P0_CTRL, 0xa6, 0xff, 10}, 411 { -1, -1, -1, -1}, 412 }; 413 #endif 414 415 /* 1b80:e425 MaxMedia UB425-TC 416 * 1b80:e1cc Delock 61959 417 * GPIO_6 - demod reset, 0=active 418 * GPIO_7 - LED, 0=active 419 */ 420 static struct em28xx_reg_seq maxmedia_ub425_tc[] = { 421 {EM2874_R80_GPIO_P0_CTRL, 0x83, 0xff, 100}, 422 {EM2874_R80_GPIO_P0_CTRL, 0xc3, 0xff, 100}, /* GPIO_6 = 1 */ 423 {EM2874_R80_GPIO_P0_CTRL, 0x43, 0xff, 000}, /* GPIO_7 = 0 */ 424 { -1, -1, -1, -1}, 425 }; 426 427 /* 2304:0242 PCTV QuatroStick (510e) 428 * GPIO_2: decoder reset, 0=active 429 * GPIO_4: decoder suspend, 0=active 430 * GPIO_6: demod reset, 0=active 431 * GPIO_7: LED, 1=active 432 */ 433 static struct em28xx_reg_seq pctv_510e[] = { 434 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 435 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 436 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 437 { -1, -1, -1, -1}, 438 }; 439 440 /* 2013:0251 PCTV QuatroStick nano (520e) 441 * GPIO_2: decoder reset, 0=active 442 * GPIO_4: decoder suspend, 0=active 443 * GPIO_6: demod reset, 0=active 444 * GPIO_7: LED, 1=active 445 */ 446 static struct em28xx_reg_seq pctv_520e[] = { 447 {EM2874_R80_GPIO_P0_CTRL, 0x10, 0xff, 100}, 448 {EM2874_R80_GPIO_P0_CTRL, 0x14, 0xff, 100}, /* GPIO_2 = 1 */ 449 {EM2874_R80_GPIO_P0_CTRL, 0x54, 0xff, 050}, /* GPIO_6 = 1 */ 450 {EM2874_R80_GPIO_P0_CTRL, 0xd4, 0xff, 000}, /* GPIO_7 = 1 */ 451 { -1, -1, -1, -1}, 452 }; 453 454 /* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 455 * reg 0x80/0x84: 456 * GPIO_0: capturing LED, 0=on, 1=off 457 * GPIO_2: AV mute button, 0=pressed, 1=unpressed 458 * GPIO 3: illumination button, 0=pressed, 1=unpressed 459 * GPIO_6: illumination/flash LED, 0=on, 1=off 460 * reg 0x81/0x85: 461 * GPIO_7: snapshot button, 0=pressed, 1=unpressed 462 */ 463 static struct em28xx_reg_seq speedlink_vad_laplace_reg_seq[] = { 464 {EM2820_R08_GPIO_CTRL, 0xf7, 0xff, 10}, 465 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xb2, 10}, 466 { -1, -1, -1, -1}, 467 }; 468 469 static struct em28xx_reg_seq pctv_292e[] = { 470 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 471 {0x0d, 0xff, 0xff, 950}, 472 {EM2874_R80_GPIO_P0_CTRL, 0xbd, 0xff, 100}, 473 {EM2874_R80_GPIO_P0_CTRL, 0xfd, 0xff, 410}, 474 {EM2874_R80_GPIO_P0_CTRL, 0x7d, 0xff, 300}, 475 {EM2874_R80_GPIO_P0_CTRL, 0x7c, 0xff, 60}, 476 {0x0d, 0x42, 0xff, 50}, 477 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, 478 {-1, -1, -1, -1}, 479 }; 480 481 static struct em28xx_reg_seq terratec_t2_stick_hd[] = { 482 {EM2874_R80_GPIO_P0_CTRL, 0xff, 0xff, 0}, 483 {0x0d, 0xff, 0xff, 600}, 484 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 10}, 485 {EM2874_R80_GPIO_P0_CTRL, 0xbc, 0xff, 100}, 486 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 100}, 487 {EM2874_R80_GPIO_P0_CTRL, 0x00, 0xff, 300}, 488 {EM2874_R80_GPIO_P0_CTRL, 0xf8, 0xff, 100}, 489 {EM2874_R80_GPIO_P0_CTRL, 0xfc, 0xff, 300}, 490 {0x0d, 0x42, 0xff, 1000}, 491 {EM2874_R5F_TS_ENABLE, 0x85, 0xff, 0}, 492 {-1, -1, -1, -1}, 493 }; 494 495 /* 496 * Button definitions 497 */ 498 static struct em28xx_button std_snapshot_button[] = { 499 { 500 .role = EM28XX_BUTTON_SNAPSHOT, 501 .reg_r = EM28XX_R0C_USBSUSP, 502 .reg_clearing = EM28XX_R0C_USBSUSP, 503 .mask = EM28XX_R0C_USBSUSP_SNAPSHOT, 504 .inverted = 0, 505 }, 506 {-1, 0, 0, 0, 0}, 507 }; 508 509 static struct em28xx_button speedlink_vad_laplace_buttons[] = { 510 { 511 .role = EM28XX_BUTTON_SNAPSHOT, 512 .reg_r = EM2874_R85_GPIO_P1_STATE, 513 .mask = 0x80, 514 .inverted = 1, 515 }, 516 { 517 .role = EM28XX_BUTTON_ILLUMINATION, 518 .reg_r = EM2874_R84_GPIO_P0_STATE, 519 .mask = 0x08, 520 .inverted = 1, 521 }, 522 {-1, 0, 0, 0, 0}, 523 }; 524 525 /* 526 * LED definitions 527 */ 528 static struct em28xx_led speedlink_vad_laplace_leds[] = { 529 { 530 .role = EM28XX_LED_ANALOG_CAPTURING, 531 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 532 .gpio_mask = 0x01, 533 .inverted = 1, 534 }, 535 { 536 .role = EM28XX_LED_ILLUMINATION, 537 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 538 .gpio_mask = 0x40, 539 .inverted = 1, 540 }, 541 {-1, 0, 0, 0}, 542 }; 543 544 static struct em28xx_led kworld_ub435q_v3_leds[] = { 545 { 546 .role = EM28XX_LED_DIGITAL_CAPTURING, 547 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 548 .gpio_mask = 0x80, 549 .inverted = 1, 550 }, 551 {-1, 0, 0, 0}, 552 }; 553 554 static struct em28xx_led pctv_80e_leds[] = { 555 { 556 .role = EM28XX_LED_DIGITAL_CAPTURING, 557 .gpio_reg = EM2874_R80_GPIO_P0_CTRL, 558 .gpio_mask = 0x80, 559 .inverted = 0, 560 }, 561 {-1, 0, 0, 0}, 562 }; 563 564 static struct em28xx_led terratec_grabby_leds[] = { 565 { 566 .role = EM28XX_LED_ANALOG_CAPTURING, 567 .gpio_reg = EM2820_R08_GPIO_CTRL, 568 .gpio_mask = EM_GPIO_3, 569 .inverted = 1, 570 }, 571 {-1, 0, 0, 0}, 572 }; 573 574 /* 575 * Board definitions 576 */ 577 struct em28xx_board em28xx_boards[] = { 578 [EM2750_BOARD_UNKNOWN] = { 579 .name = "EM2710/EM2750/EM2751 webcam grabber", 580 .xclk = EM28XX_XCLK_FREQUENCY_20MHZ, 581 .tuner_type = TUNER_ABSENT, 582 .is_webcam = 1, 583 .input = { { 584 .type = EM28XX_VMUX_COMPOSITE, 585 .vmux = 0, 586 .amux = EM28XX_AMUX_VIDEO, 587 .gpio = silvercrest_reg_seq, 588 } }, 589 }, 590 [EM2800_BOARD_UNKNOWN] = { 591 .name = "Unknown EM2800 video grabber", 592 .is_em2800 = 1, 593 .tda9887_conf = TDA9887_PRESENT, 594 .decoder = EM28XX_SAA711X, 595 .tuner_type = TUNER_ABSENT, 596 .input = { { 597 .type = EM28XX_VMUX_COMPOSITE, 598 .vmux = SAA7115_COMPOSITE0, 599 .amux = EM28XX_AMUX_LINE_IN, 600 }, { 601 .type = EM28XX_VMUX_SVIDEO, 602 .vmux = SAA7115_SVIDEO3, 603 .amux = EM28XX_AMUX_LINE_IN, 604 } }, 605 }, 606 [EM2820_BOARD_UNKNOWN] = { 607 .name = "Unknown EM2750/28xx video grabber", 608 .tuner_type = TUNER_ABSENT, 609 .is_webcam = 1, /* To enable sensor probe */ 610 }, 611 [EM2750_BOARD_DLCW_130] = { 612 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 613 .name = "Huaqi DLCW-130", 614 .valid = EM28XX_BOARD_NOT_VALIDATED, 615 .xclk = EM28XX_XCLK_FREQUENCY_48MHZ, 616 .tuner_type = TUNER_ABSENT, 617 .is_webcam = 1, 618 .input = { { 619 .type = EM28XX_VMUX_COMPOSITE, 620 .vmux = 0, 621 .amux = EM28XX_AMUX_VIDEO, 622 } }, 623 }, 624 [EM2820_BOARD_KWORLD_PVRTV2800RF] = { 625 .name = "Kworld PVR TV 2800 RF", 626 .tuner_type = TUNER_TEMIC_PAL, 627 .tda9887_conf = TDA9887_PRESENT, 628 .decoder = EM28XX_SAA711X, 629 .input = { { 630 .type = EM28XX_VMUX_COMPOSITE, 631 .vmux = SAA7115_COMPOSITE0, 632 .amux = EM28XX_AMUX_LINE_IN, 633 }, { 634 .type = EM28XX_VMUX_SVIDEO, 635 .vmux = SAA7115_SVIDEO3, 636 .amux = EM28XX_AMUX_LINE_IN, 637 } }, 638 }, 639 [EM2820_BOARD_GADMEI_TVR200] = { 640 .name = "Gadmei TVR200", 641 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 642 .tda9887_conf = TDA9887_PRESENT, 643 .decoder = EM28XX_SAA711X, 644 .input = { { 645 .type = EM28XX_VMUX_TELEVISION, 646 .vmux = SAA7115_COMPOSITE2, 647 .amux = EM28XX_AMUX_LINE_IN, 648 }, { 649 .type = EM28XX_VMUX_COMPOSITE, 650 .vmux = SAA7115_COMPOSITE0, 651 .amux = EM28XX_AMUX_LINE_IN, 652 }, { 653 .type = EM28XX_VMUX_SVIDEO, 654 .vmux = SAA7115_SVIDEO3, 655 .amux = EM28XX_AMUX_LINE_IN, 656 } }, 657 }, 658 [EM2820_BOARD_TERRATEC_CINERGY_250] = { 659 .name = "Terratec Cinergy 250 USB", 660 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 661 .has_ir_i2c = 1, 662 .tda9887_conf = TDA9887_PRESENT, 663 .decoder = EM28XX_SAA711X, 664 .input = { { 665 .type = EM28XX_VMUX_TELEVISION, 666 .vmux = SAA7115_COMPOSITE2, 667 .amux = EM28XX_AMUX_VIDEO, 668 }, { 669 .type = EM28XX_VMUX_COMPOSITE, 670 .vmux = SAA7115_COMPOSITE0, 671 .amux = EM28XX_AMUX_LINE_IN, 672 }, { 673 .type = EM28XX_VMUX_SVIDEO, 674 .vmux = SAA7115_SVIDEO3, 675 .amux = EM28XX_AMUX_LINE_IN, 676 } }, 677 }, 678 [EM2820_BOARD_PINNACLE_USB_2] = { 679 .name = "Pinnacle PCTV USB 2", 680 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 681 .has_ir_i2c = 1, 682 .tda9887_conf = TDA9887_PRESENT, 683 .decoder = EM28XX_SAA711X, 684 .input = { { 685 .type = EM28XX_VMUX_TELEVISION, 686 .vmux = SAA7115_COMPOSITE2, 687 .amux = EM28XX_AMUX_VIDEO, 688 }, { 689 .type = EM28XX_VMUX_COMPOSITE, 690 .vmux = SAA7115_COMPOSITE0, 691 .amux = EM28XX_AMUX_LINE_IN, 692 }, { 693 .type = EM28XX_VMUX_SVIDEO, 694 .vmux = SAA7115_SVIDEO3, 695 .amux = EM28XX_AMUX_LINE_IN, 696 } }, 697 }, 698 [EM2820_BOARD_HAUPPAUGE_WINTV_USB_2] = { 699 .name = "Hauppauge WinTV USB 2", 700 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 701 .tda9887_conf = TDA9887_PRESENT | 702 TDA9887_PORT1_ACTIVE | 703 TDA9887_PORT2_ACTIVE, 704 .decoder = EM28XX_TVP5150, 705 .has_msp34xx = 1, 706 .has_ir_i2c = 1, 707 .input = { { 708 .type = EM28XX_VMUX_TELEVISION, 709 .vmux = TVP5150_COMPOSITE0, 710 .amux = MSP_INPUT_DEFAULT, 711 }, { 712 .type = EM28XX_VMUX_SVIDEO, 713 .vmux = TVP5150_SVIDEO, 714 .amux = MSP_INPUT(MSP_IN_SCART1, MSP_IN_TUNER1, 715 MSP_DSP_IN_SCART, MSP_DSP_IN_SCART), 716 } }, 717 }, 718 [EM2820_BOARD_DLINK_USB_TV] = { 719 .name = "D-Link DUB-T210 TV Tuner", 720 .valid = EM28XX_BOARD_NOT_VALIDATED, 721 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 722 .tda9887_conf = TDA9887_PRESENT, 723 .decoder = EM28XX_SAA711X, 724 .input = { { 725 .type = EM28XX_VMUX_TELEVISION, 726 .vmux = SAA7115_COMPOSITE2, 727 .amux = EM28XX_AMUX_LINE_IN, 728 }, { 729 .type = EM28XX_VMUX_COMPOSITE, 730 .vmux = SAA7115_COMPOSITE0, 731 .amux = EM28XX_AMUX_LINE_IN, 732 }, { 733 .type = EM28XX_VMUX_SVIDEO, 734 .vmux = SAA7115_SVIDEO3, 735 .amux = EM28XX_AMUX_LINE_IN, 736 } }, 737 }, 738 [EM2820_BOARD_HERCULES_SMART_TV_USB2] = { 739 .name = "Hercules Smart TV USB 2.0", 740 .valid = EM28XX_BOARD_NOT_VALIDATED, 741 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 742 .tda9887_conf = TDA9887_PRESENT, 743 .decoder = EM28XX_SAA711X, 744 .input = { { 745 .type = EM28XX_VMUX_TELEVISION, 746 .vmux = SAA7115_COMPOSITE2, 747 .amux = EM28XX_AMUX_LINE_IN, 748 }, { 749 .type = EM28XX_VMUX_COMPOSITE, 750 .vmux = SAA7115_COMPOSITE0, 751 .amux = EM28XX_AMUX_LINE_IN, 752 }, { 753 .type = EM28XX_VMUX_SVIDEO, 754 .vmux = SAA7115_SVIDEO3, 755 .amux = EM28XX_AMUX_LINE_IN, 756 } }, 757 }, 758 [EM2820_BOARD_PINNACLE_USB_2_FM1216ME] = { 759 .name = "Pinnacle PCTV USB 2 (Philips FM1216ME)", 760 .valid = EM28XX_BOARD_NOT_VALIDATED, 761 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 762 .tda9887_conf = TDA9887_PRESENT, 763 .decoder = EM28XX_SAA711X, 764 .input = { { 765 .type = EM28XX_VMUX_TELEVISION, 766 .vmux = SAA7115_COMPOSITE2, 767 .amux = EM28XX_AMUX_VIDEO, 768 }, { 769 .type = EM28XX_VMUX_COMPOSITE, 770 .vmux = SAA7115_COMPOSITE0, 771 .amux = EM28XX_AMUX_LINE_IN, 772 }, { 773 .type = EM28XX_VMUX_SVIDEO, 774 .vmux = SAA7115_SVIDEO3, 775 .amux = EM28XX_AMUX_LINE_IN, 776 } }, 777 }, 778 [EM2820_BOARD_GADMEI_UTV310] = { 779 .name = "Gadmei UTV310", 780 .valid = EM28XX_BOARD_NOT_VALIDATED, 781 .tuner_type = TUNER_TNF_5335MF, 782 .tda9887_conf = TDA9887_PRESENT, 783 .decoder = EM28XX_SAA711X, 784 .input = { { 785 .type = EM28XX_VMUX_TELEVISION, 786 .vmux = SAA7115_COMPOSITE1, 787 .amux = EM28XX_AMUX_LINE_IN, 788 }, { 789 .type = EM28XX_VMUX_COMPOSITE, 790 .vmux = SAA7115_COMPOSITE0, 791 .amux = EM28XX_AMUX_LINE_IN, 792 }, { 793 .type = EM28XX_VMUX_SVIDEO, 794 .vmux = SAA7115_SVIDEO3, 795 .amux = EM28XX_AMUX_LINE_IN, 796 } }, 797 }, 798 [EM2820_BOARD_LEADTEK_WINFAST_USBII_DELUXE] = { 799 .name = "Leadtek Winfast USB II Deluxe", 800 .valid = EM28XX_BOARD_NOT_VALIDATED, 801 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, 802 .has_ir_i2c = 1, 803 .tvaudio_addr = 0x58, 804 .tda9887_conf = TDA9887_PRESENT | 805 TDA9887_PORT2_ACTIVE | 806 TDA9887_QSS, 807 .decoder = EM28XX_SAA711X, 808 .adecoder = EM28XX_TVAUDIO, 809 .input = { { 810 .type = EM28XX_VMUX_TELEVISION, 811 .vmux = SAA7115_COMPOSITE4, 812 .amux = EM28XX_AMUX_AUX, 813 }, { 814 .type = EM28XX_VMUX_COMPOSITE, 815 .vmux = SAA7115_COMPOSITE5, 816 .amux = EM28XX_AMUX_LINE_IN, 817 }, { 818 .type = EM28XX_VMUX_SVIDEO, 819 .vmux = SAA7115_SVIDEO3, 820 .amux = EM28XX_AMUX_LINE_IN, 821 } }, 822 .radio = { 823 .type = EM28XX_RADIO, 824 .amux = EM28XX_AMUX_AUX, 825 } 826 }, 827 [EM2820_BOARD_VIDEOLOGY_20K14XUSB] = { 828 .name = "Videology 20K14XUSB USB2.0", 829 .valid = EM28XX_BOARD_NOT_VALIDATED, 830 .tuner_type = TUNER_ABSENT, 831 .is_webcam = 1, 832 .input = { { 833 .type = EM28XX_VMUX_COMPOSITE, 834 .vmux = 0, 835 .amux = EM28XX_AMUX_VIDEO, 836 } }, 837 }, 838 [EM2820_BOARD_SILVERCREST_WEBCAM] = { 839 .name = "Silvercrest Webcam 1.3mpix", 840 .tuner_type = TUNER_ABSENT, 841 .is_webcam = 1, 842 .input = { { 843 .type = EM28XX_VMUX_COMPOSITE, 844 .vmux = 0, 845 .amux = EM28XX_AMUX_VIDEO, 846 .gpio = silvercrest_reg_seq, 847 } }, 848 }, 849 [EM2821_BOARD_SUPERCOMP_USB_2] = { 850 .name = "Supercomp USB 2.0 TV", 851 .valid = EM28XX_BOARD_NOT_VALIDATED, 852 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 853 .tda9887_conf = TDA9887_PRESENT | 854 TDA9887_PORT1_ACTIVE | 855 TDA9887_PORT2_ACTIVE, 856 .decoder = EM28XX_SAA711X, 857 .input = { { 858 .type = EM28XX_VMUX_TELEVISION, 859 .vmux = SAA7115_COMPOSITE2, 860 .amux = EM28XX_AMUX_LINE_IN, 861 }, { 862 .type = EM28XX_VMUX_COMPOSITE, 863 .vmux = SAA7115_COMPOSITE0, 864 .amux = EM28XX_AMUX_VIDEO, 865 }, { 866 .type = EM28XX_VMUX_SVIDEO, 867 .vmux = SAA7115_SVIDEO3, 868 .amux = EM28XX_AMUX_LINE_IN, 869 } }, 870 }, 871 [EM2821_BOARD_USBGEAR_VD204] = { 872 .name = "Usbgear VD204v9", 873 .valid = EM28XX_BOARD_NOT_VALIDATED, 874 .tuner_type = TUNER_ABSENT, /* Capture only device */ 875 .decoder = EM28XX_SAA711X, 876 .input = { { 877 .type = EM28XX_VMUX_COMPOSITE, 878 .vmux = SAA7115_COMPOSITE0, 879 .amux = EM28XX_AMUX_LINE_IN, 880 }, { 881 .type = EM28XX_VMUX_SVIDEO, 882 .vmux = SAA7115_SVIDEO3, 883 .amux = EM28XX_AMUX_LINE_IN, 884 } }, 885 }, 886 [EM2860_BOARD_NETGMBH_CAM] = { 887 /* Beijing Huaqi Information Digital Technology Co., Ltd */ 888 .name = "NetGMBH Cam", 889 .valid = EM28XX_BOARD_NOT_VALIDATED, 890 .tuner_type = TUNER_ABSENT, 891 .is_webcam = 1, 892 .input = { { 893 .type = EM28XX_VMUX_COMPOSITE, 894 .vmux = 0, 895 .amux = EM28XX_AMUX_VIDEO, 896 } }, 897 }, 898 [EM2860_BOARD_TYPHOON_DVD_MAKER] = { 899 .name = "Typhoon DVD Maker", 900 .decoder = EM28XX_SAA711X, 901 .tuner_type = TUNER_ABSENT, /* Capture only device */ 902 .input = { { 903 .type = EM28XX_VMUX_COMPOSITE, 904 .vmux = SAA7115_COMPOSITE0, 905 .amux = EM28XX_AMUX_LINE_IN, 906 }, { 907 .type = EM28XX_VMUX_SVIDEO, 908 .vmux = SAA7115_SVIDEO3, 909 .amux = EM28XX_AMUX_LINE_IN, 910 } }, 911 }, 912 [EM2860_BOARD_GADMEI_UTV330] = { 913 .name = "Gadmei UTV330", 914 .valid = EM28XX_BOARD_NOT_VALIDATED, 915 .tuner_type = TUNER_TNF_5335MF, 916 .tda9887_conf = TDA9887_PRESENT, 917 .decoder = EM28XX_SAA711X, 918 .input = { { 919 .type = EM28XX_VMUX_TELEVISION, 920 .vmux = SAA7115_COMPOSITE2, 921 .amux = EM28XX_AMUX_VIDEO, 922 }, { 923 .type = EM28XX_VMUX_COMPOSITE, 924 .vmux = SAA7115_COMPOSITE0, 925 .amux = EM28XX_AMUX_LINE_IN, 926 }, { 927 .type = EM28XX_VMUX_SVIDEO, 928 .vmux = SAA7115_SVIDEO3, 929 .amux = EM28XX_AMUX_LINE_IN, 930 } }, 931 }, 932 [EM2861_BOARD_GADMEI_UTV330PLUS] = { 933 .name = "Gadmei UTV330+", 934 .tuner_type = TUNER_TNF_5335MF, 935 .tda9887_conf = TDA9887_PRESENT, 936 .ir_codes = RC_MAP_GADMEI_RM008Z, 937 .decoder = EM28XX_SAA711X, 938 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 939 .input = { { 940 .type = EM28XX_VMUX_TELEVISION, 941 .vmux = SAA7115_COMPOSITE2, 942 .amux = EM28XX_AMUX_VIDEO, 943 }, { 944 .type = EM28XX_VMUX_COMPOSITE, 945 .vmux = SAA7115_COMPOSITE0, 946 .amux = EM28XX_AMUX_LINE_IN, 947 }, { 948 .type = EM28XX_VMUX_SVIDEO, 949 .vmux = SAA7115_SVIDEO3, 950 .amux = EM28XX_AMUX_LINE_IN, 951 } }, 952 }, 953 [EM2860_BOARD_TERRATEC_HYBRID_XS] = { 954 .name = "Terratec Cinergy A Hybrid XS", 955 .valid = EM28XX_BOARD_NOT_VALIDATED, 956 .tuner_type = TUNER_XC2028, 957 .tuner_gpio = default_tuner_gpio, 958 .decoder = EM28XX_TVP5150, 959 960 .input = { { 961 .type = EM28XX_VMUX_TELEVISION, 962 .vmux = TVP5150_COMPOSITE0, 963 .amux = EM28XX_AMUX_VIDEO, 964 .gpio = hauppauge_wintv_hvr_900_analog, 965 }, { 966 .type = EM28XX_VMUX_COMPOSITE, 967 .vmux = TVP5150_COMPOSITE1, 968 .amux = EM28XX_AMUX_LINE_IN, 969 .gpio = hauppauge_wintv_hvr_900_analog, 970 }, { 971 .type = EM28XX_VMUX_SVIDEO, 972 .vmux = TVP5150_SVIDEO, 973 .amux = EM28XX_AMUX_LINE_IN, 974 .gpio = hauppauge_wintv_hvr_900_analog, 975 } }, 976 }, 977 [EM2861_BOARD_KWORLD_PVRTV_300U] = { 978 .name = "KWorld PVRTV 300U", 979 .valid = EM28XX_BOARD_NOT_VALIDATED, 980 .tuner_type = TUNER_XC2028, 981 .tuner_gpio = default_tuner_gpio, 982 .decoder = EM28XX_TVP5150, 983 .input = { { 984 .type = EM28XX_VMUX_TELEVISION, 985 .vmux = TVP5150_COMPOSITE0, 986 .amux = EM28XX_AMUX_VIDEO, 987 }, { 988 .type = EM28XX_VMUX_COMPOSITE, 989 .vmux = TVP5150_COMPOSITE1, 990 .amux = EM28XX_AMUX_LINE_IN, 991 }, { 992 .type = EM28XX_VMUX_SVIDEO, 993 .vmux = TVP5150_SVIDEO, 994 .amux = EM28XX_AMUX_LINE_IN, 995 } }, 996 }, 997 [EM2861_BOARD_YAKUMO_MOVIE_MIXER] = { 998 .name = "Yakumo MovieMixer", 999 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1000 .decoder = EM28XX_TVP5150, 1001 .input = { { 1002 .type = EM28XX_VMUX_TELEVISION, 1003 .vmux = TVP5150_COMPOSITE0, 1004 .amux = EM28XX_AMUX_VIDEO, 1005 }, { 1006 .type = EM28XX_VMUX_COMPOSITE, 1007 .vmux = TVP5150_COMPOSITE1, 1008 .amux = EM28XX_AMUX_LINE_IN, 1009 }, { 1010 .type = EM28XX_VMUX_SVIDEO, 1011 .vmux = TVP5150_SVIDEO, 1012 .amux = EM28XX_AMUX_LINE_IN, 1013 } }, 1014 }, 1015 [EM2860_BOARD_TVP5150_REFERENCE_DESIGN] = { 1016 .name = "EM2860/TVP5150 Reference Design", 1017 .tuner_type = TUNER_ABSENT, /* Capture only device */ 1018 .decoder = EM28XX_TVP5150, 1019 .input = { { 1020 .type = EM28XX_VMUX_COMPOSITE, 1021 .vmux = TVP5150_COMPOSITE1, 1022 .amux = EM28XX_AMUX_LINE_IN, 1023 }, { 1024 .type = EM28XX_VMUX_SVIDEO, 1025 .vmux = TVP5150_SVIDEO, 1026 .amux = EM28XX_AMUX_LINE_IN, 1027 } }, 1028 }, 1029 [EM2861_BOARD_PLEXTOR_PX_TV100U] = { 1030 .name = "Plextor ConvertX PX-TV100U", 1031 .tuner_type = TUNER_TNF_5335MF, 1032 .xclk = EM28XX_XCLK_I2S_MSB_TIMING | 1033 EM28XX_XCLK_FREQUENCY_12MHZ, 1034 .tda9887_conf = TDA9887_PRESENT, 1035 .decoder = EM28XX_TVP5150, 1036 .has_msp34xx = 1, 1037 .input = { { 1038 .type = EM28XX_VMUX_TELEVISION, 1039 .vmux = TVP5150_COMPOSITE0, 1040 .amux = EM28XX_AMUX_LINE_IN, 1041 .gpio = pinnacle_hybrid_pro_analog, 1042 }, { 1043 .type = EM28XX_VMUX_COMPOSITE, 1044 .vmux = TVP5150_COMPOSITE1, 1045 .amux = EM28XX_AMUX_LINE_IN, 1046 .gpio = pinnacle_hybrid_pro_analog, 1047 }, { 1048 .type = EM28XX_VMUX_SVIDEO, 1049 .vmux = TVP5150_SVIDEO, 1050 .amux = EM28XX_AMUX_LINE_IN, 1051 .gpio = pinnacle_hybrid_pro_analog, 1052 } }, 1053 }, 1054 1055 /* Those boards with em2870 are DVB Only*/ 1056 1057 [EM2870_BOARD_TERRATEC_XS] = { 1058 .name = "Terratec Cinergy T XS", 1059 .valid = EM28XX_BOARD_NOT_VALIDATED, 1060 .tuner_type = TUNER_XC2028, 1061 .tuner_gpio = default_tuner_gpio, 1062 }, 1063 [EM2870_BOARD_TERRATEC_XS_MT2060] = { 1064 .name = "Terratec Cinergy T XS (MT2060)", 1065 .xclk = EM28XX_XCLK_IR_RC5_MODE | 1066 EM28XX_XCLK_FREQUENCY_12MHZ, 1067 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1068 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1069 .has_dvb = 1, 1070 .tuner_gpio = default_tuner_gpio, 1071 }, 1072 [EM2870_BOARD_KWORLD_350U] = { 1073 .name = "Kworld 350 U DVB-T", 1074 .valid = EM28XX_BOARD_NOT_VALIDATED, 1075 .tuner_type = TUNER_XC2028, 1076 .tuner_gpio = default_tuner_gpio, 1077 }, 1078 [EM2870_BOARD_KWORLD_355U] = { 1079 .name = "Kworld 355 U DVB-T", 1080 .valid = EM28XX_BOARD_NOT_VALIDATED, 1081 .tuner_type = TUNER_ABSENT, 1082 .tuner_gpio = default_tuner_gpio, 1083 .has_dvb = 1, 1084 .dvb_gpio = default_digital, 1085 }, 1086 [EM2870_BOARD_PINNACLE_PCTV_DVB] = { 1087 .name = "Pinnacle PCTV DVB-T", 1088 .valid = EM28XX_BOARD_NOT_VALIDATED, 1089 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1090 /* djh - I have serious doubts this is right... */ 1091 .xclk = EM28XX_XCLK_IR_RC5_MODE | 1092 EM28XX_XCLK_FREQUENCY_10MHZ, 1093 }, 1094 [EM2870_BOARD_COMPRO_VIDEOMATE] = { 1095 .name = "Compro, VideoMate U3", 1096 .valid = EM28XX_BOARD_NOT_VALIDATED, 1097 .tuner_type = TUNER_ABSENT, /* MT2060 */ 1098 }, 1099 1100 [EM2880_BOARD_TERRATEC_HYBRID_XS_FR] = { 1101 .name = "Terratec Hybrid XS Secam", 1102 .has_msp34xx = 1, 1103 .tuner_type = TUNER_XC2028, 1104 .tuner_gpio = default_tuner_gpio, 1105 .decoder = EM28XX_TVP5150, 1106 .has_dvb = 1, 1107 .dvb_gpio = terratec_cinergy_USB_XS_FR_digital, 1108 .input = { { 1109 .type = EM28XX_VMUX_TELEVISION, 1110 .vmux = TVP5150_COMPOSITE0, 1111 .amux = EM28XX_AMUX_VIDEO, 1112 .gpio = terratec_cinergy_USB_XS_FR_analog, 1113 }, { 1114 .type = EM28XX_VMUX_COMPOSITE, 1115 .vmux = TVP5150_COMPOSITE1, 1116 .amux = EM28XX_AMUX_LINE_IN, 1117 .gpio = terratec_cinergy_USB_XS_FR_analog, 1118 }, { 1119 .type = EM28XX_VMUX_SVIDEO, 1120 .vmux = TVP5150_SVIDEO, 1121 .amux = EM28XX_AMUX_LINE_IN, 1122 .gpio = terratec_cinergy_USB_XS_FR_analog, 1123 } }, 1124 }, 1125 [EM2884_BOARD_TERRATEC_H5] = { 1126 .name = "Terratec Cinergy H5", 1127 .has_dvb = 1, 1128 #if 0 1129 .tuner_type = TUNER_PHILIPS_TDA8290, 1130 .tuner_addr = 0x41, 1131 .dvb_gpio = terratec_h5_digital, /* FIXME: probably wrong */ 1132 .tuner_gpio = terratec_h5_gpio, 1133 #else 1134 .tuner_type = TUNER_ABSENT, 1135 #endif 1136 .def_i2c_bus = 1, 1137 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1138 EM28XX_I2C_FREQ_400_KHZ, 1139 }, 1140 [EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C] = { 1141 .name = "Hauppauge WinTV HVR 930C", 1142 .has_dvb = 1, 1143 #if 0 /* FIXME: Add analog support */ 1144 .tuner_type = TUNER_XC5000, 1145 .tuner_addr = 0x41, 1146 .dvb_gpio = hauppauge_930c_digital, 1147 .tuner_gpio = hauppauge_930c_gpio, 1148 #else 1149 .tuner_type = TUNER_ABSENT, 1150 #endif 1151 .ir_codes = RC_MAP_HAUPPAUGE, 1152 .def_i2c_bus = 1, 1153 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1154 EM28XX_I2C_FREQ_400_KHZ, 1155 }, 1156 [EM2884_BOARD_C3TECH_DIGITAL_DUO] = { 1157 .name = "C3 Tech Digital Duo HDTV/SDTV USB", 1158 .has_dvb = 1, 1159 /* FIXME: Add analog support - need a saa7136 driver */ 1160 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 1161 .ir_codes = RC_MAP_EMPTY, 1162 .def_i2c_bus = 1, 1163 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1164 .dvb_gpio = c3tech_digital_duo_digital, 1165 }, 1166 [EM2884_BOARD_CINERGY_HTC_STICK] = { 1167 .name = "Terratec Cinergy HTC Stick", 1168 .has_dvb = 1, 1169 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1170 .tuner_type = TUNER_ABSENT, 1171 .def_i2c_bus = 1, 1172 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1173 EM28XX_I2C_FREQ_400_KHZ, 1174 }, 1175 [EM2884_BOARD_ELGATO_EYETV_HYBRID_2008] = { 1176 .name = "Elgato EyeTV Hybrid 2008 INT", 1177 .has_dvb = 1, 1178 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 1179 .tuner_type = TUNER_ABSENT, 1180 .def_i2c_bus = 1, 1181 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1182 EM28XX_I2C_FREQ_400_KHZ, 1183 }, 1184 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900] = { 1185 .name = "Hauppauge WinTV HVR 900", 1186 .tda9887_conf = TDA9887_PRESENT, 1187 .tuner_type = TUNER_XC2028, 1188 .tuner_gpio = default_tuner_gpio, 1189 .mts_firmware = 1, 1190 .has_dvb = 1, 1191 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1192 .ir_codes = RC_MAP_HAUPPAUGE, 1193 .decoder = EM28XX_TVP5150, 1194 .input = { { 1195 .type = EM28XX_VMUX_TELEVISION, 1196 .vmux = TVP5150_COMPOSITE0, 1197 .amux = EM28XX_AMUX_VIDEO, 1198 .gpio = hauppauge_wintv_hvr_900_analog, 1199 }, { 1200 .type = EM28XX_VMUX_COMPOSITE, 1201 .vmux = TVP5150_COMPOSITE1, 1202 .amux = EM28XX_AMUX_LINE_IN, 1203 .gpio = hauppauge_wintv_hvr_900_analog, 1204 }, { 1205 .type = EM28XX_VMUX_SVIDEO, 1206 .vmux = TVP5150_SVIDEO, 1207 .amux = EM28XX_AMUX_LINE_IN, 1208 .gpio = hauppauge_wintv_hvr_900_analog, 1209 } }, 1210 }, 1211 [EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2] = { 1212 .name = "Hauppauge WinTV HVR 900 (R2)", 1213 .tda9887_conf = TDA9887_PRESENT, 1214 .tuner_type = TUNER_XC2028, 1215 .tuner_gpio = default_tuner_gpio, 1216 .mts_firmware = 1, 1217 .has_dvb = 1, 1218 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1219 .ir_codes = RC_MAP_HAUPPAUGE, 1220 .decoder = EM28XX_TVP5150, 1221 .input = { { 1222 .type = EM28XX_VMUX_TELEVISION, 1223 .vmux = TVP5150_COMPOSITE0, 1224 .amux = EM28XX_AMUX_VIDEO, 1225 .gpio = hauppauge_wintv_hvr_900_analog, 1226 }, { 1227 .type = EM28XX_VMUX_COMPOSITE, 1228 .vmux = TVP5150_COMPOSITE1, 1229 .amux = EM28XX_AMUX_LINE_IN, 1230 .gpio = hauppauge_wintv_hvr_900_analog, 1231 }, { 1232 .type = EM28XX_VMUX_SVIDEO, 1233 .vmux = TVP5150_SVIDEO, 1234 .amux = EM28XX_AMUX_LINE_IN, 1235 .gpio = hauppauge_wintv_hvr_900_analog, 1236 } }, 1237 }, 1238 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850] = { 1239 .name = "Hauppauge WinTV HVR 850", 1240 .tuner_type = TUNER_XC2028, 1241 .tuner_gpio = default_tuner_gpio, 1242 .mts_firmware = 1, 1243 .has_dvb = 1, 1244 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1245 .ir_codes = RC_MAP_HAUPPAUGE, 1246 .decoder = EM28XX_TVP5150, 1247 .input = { { 1248 .type = EM28XX_VMUX_TELEVISION, 1249 .vmux = TVP5150_COMPOSITE0, 1250 .amux = EM28XX_AMUX_VIDEO, 1251 .gpio = hauppauge_wintv_hvr_900_analog, 1252 }, { 1253 .type = EM28XX_VMUX_COMPOSITE, 1254 .vmux = TVP5150_COMPOSITE1, 1255 .amux = EM28XX_AMUX_LINE_IN, 1256 .gpio = hauppauge_wintv_hvr_900_analog, 1257 }, { 1258 .type = EM28XX_VMUX_SVIDEO, 1259 .vmux = TVP5150_SVIDEO, 1260 .amux = EM28XX_AMUX_LINE_IN, 1261 .gpio = hauppauge_wintv_hvr_900_analog, 1262 } }, 1263 }, 1264 [EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950] = { 1265 .name = "Hauppauge WinTV HVR 950", 1266 .tuner_type = TUNER_XC2028, 1267 .tuner_gpio = default_tuner_gpio, 1268 .mts_firmware = 1, 1269 .has_dvb = 1, 1270 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1271 .ir_codes = RC_MAP_HAUPPAUGE, 1272 .decoder = EM28XX_TVP5150, 1273 .input = { { 1274 .type = EM28XX_VMUX_TELEVISION, 1275 .vmux = TVP5150_COMPOSITE0, 1276 .amux = EM28XX_AMUX_VIDEO, 1277 .gpio = hauppauge_wintv_hvr_900_analog, 1278 }, { 1279 .type = EM28XX_VMUX_COMPOSITE, 1280 .vmux = TVP5150_COMPOSITE1, 1281 .amux = EM28XX_AMUX_LINE_IN, 1282 .gpio = hauppauge_wintv_hvr_900_analog, 1283 }, { 1284 .type = EM28XX_VMUX_SVIDEO, 1285 .vmux = TVP5150_SVIDEO, 1286 .amux = EM28XX_AMUX_LINE_IN, 1287 .gpio = hauppauge_wintv_hvr_900_analog, 1288 } }, 1289 }, 1290 [EM2880_BOARD_PINNACLE_PCTV_HD_PRO] = { 1291 .name = "Pinnacle PCTV HD Pro Stick", 1292 .tuner_type = TUNER_XC2028, 1293 .tuner_gpio = default_tuner_gpio, 1294 .mts_firmware = 1, 1295 .has_dvb = 1, 1296 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1297 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1298 .decoder = EM28XX_TVP5150, 1299 .input = { { 1300 .type = EM28XX_VMUX_TELEVISION, 1301 .vmux = TVP5150_COMPOSITE0, 1302 .amux = EM28XX_AMUX_VIDEO, 1303 .gpio = hauppauge_wintv_hvr_900_analog, 1304 }, { 1305 .type = EM28XX_VMUX_COMPOSITE, 1306 .vmux = TVP5150_COMPOSITE1, 1307 .amux = EM28XX_AMUX_LINE_IN, 1308 .gpio = hauppauge_wintv_hvr_900_analog, 1309 }, { 1310 .type = EM28XX_VMUX_SVIDEO, 1311 .vmux = TVP5150_SVIDEO, 1312 .amux = EM28XX_AMUX_LINE_IN, 1313 .gpio = hauppauge_wintv_hvr_900_analog, 1314 } }, 1315 }, 1316 [EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600] = { 1317 .name = "AMD ATI TV Wonder HD 600", 1318 .tuner_type = TUNER_XC2028, 1319 .tuner_gpio = default_tuner_gpio, 1320 .mts_firmware = 1, 1321 .has_dvb = 1, 1322 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1323 .ir_codes = RC_MAP_ATI_TV_WONDER_HD_600, 1324 .decoder = EM28XX_TVP5150, 1325 .input = { { 1326 .type = EM28XX_VMUX_TELEVISION, 1327 .vmux = TVP5150_COMPOSITE0, 1328 .amux = EM28XX_AMUX_VIDEO, 1329 .gpio = hauppauge_wintv_hvr_900_analog, 1330 }, { 1331 .type = EM28XX_VMUX_COMPOSITE, 1332 .vmux = TVP5150_COMPOSITE1, 1333 .amux = EM28XX_AMUX_LINE_IN, 1334 .gpio = hauppauge_wintv_hvr_900_analog, 1335 }, { 1336 .type = EM28XX_VMUX_SVIDEO, 1337 .vmux = TVP5150_SVIDEO, 1338 .amux = EM28XX_AMUX_LINE_IN, 1339 .gpio = hauppauge_wintv_hvr_900_analog, 1340 } }, 1341 }, 1342 [EM2880_BOARD_TERRATEC_HYBRID_XS] = { 1343 .name = "Terratec Hybrid XS", 1344 .tuner_type = TUNER_XC2028, 1345 .tuner_gpio = default_tuner_gpio, 1346 .decoder = EM28XX_TVP5150, 1347 .has_dvb = 1, 1348 .dvb_gpio = default_digital, 1349 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1350 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1351 .input = { { 1352 .type = EM28XX_VMUX_TELEVISION, 1353 .vmux = TVP5150_COMPOSITE0, 1354 .amux = EM28XX_AMUX_VIDEO, 1355 .gpio = default_analog, 1356 }, { 1357 .type = EM28XX_VMUX_COMPOSITE, 1358 .vmux = TVP5150_COMPOSITE1, 1359 .amux = EM28XX_AMUX_LINE_IN, 1360 .gpio = default_analog, 1361 }, { 1362 .type = EM28XX_VMUX_SVIDEO, 1363 .vmux = TVP5150_SVIDEO, 1364 .amux = EM28XX_AMUX_LINE_IN, 1365 .gpio = default_analog, 1366 } }, 1367 }, 1368 /* maybe there's a reason behind it why Terratec sells the Hybrid XS 1369 as Prodigy XS with a different PID, let's keep it separated for now 1370 maybe we'll need it lateron */ 1371 [EM2880_BOARD_TERRATEC_PRODIGY_XS] = { 1372 .name = "Terratec Prodigy XS", 1373 .tuner_type = TUNER_XC2028, 1374 .tuner_gpio = default_tuner_gpio, 1375 .decoder = EM28XX_TVP5150, 1376 .input = { { 1377 .type = EM28XX_VMUX_TELEVISION, 1378 .vmux = TVP5150_COMPOSITE0, 1379 .amux = EM28XX_AMUX_VIDEO, 1380 .gpio = hauppauge_wintv_hvr_900_analog, 1381 }, { 1382 .type = EM28XX_VMUX_COMPOSITE, 1383 .vmux = TVP5150_COMPOSITE1, 1384 .amux = EM28XX_AMUX_LINE_IN, 1385 .gpio = hauppauge_wintv_hvr_900_analog, 1386 }, { 1387 .type = EM28XX_VMUX_SVIDEO, 1388 .vmux = TVP5150_SVIDEO, 1389 .amux = EM28XX_AMUX_LINE_IN, 1390 .gpio = hauppauge_wintv_hvr_900_analog, 1391 } }, 1392 }, 1393 [EM2820_BOARD_MSI_VOX_USB_2] = { 1394 .name = "MSI VOX USB 2.0", 1395 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1396 .tda9887_conf = TDA9887_PRESENT | 1397 TDA9887_PORT1_ACTIVE | 1398 TDA9887_PORT2_ACTIVE, 1399 .max_range_640_480 = 1, 1400 .decoder = EM28XX_SAA711X, 1401 .input = { { 1402 .type = EM28XX_VMUX_TELEVISION, 1403 .vmux = SAA7115_COMPOSITE4, 1404 .amux = EM28XX_AMUX_VIDEO, 1405 }, { 1406 .type = EM28XX_VMUX_COMPOSITE, 1407 .vmux = SAA7115_COMPOSITE0, 1408 .amux = EM28XX_AMUX_LINE_IN, 1409 }, { 1410 .type = EM28XX_VMUX_SVIDEO, 1411 .vmux = SAA7115_SVIDEO3, 1412 .amux = EM28XX_AMUX_LINE_IN, 1413 } }, 1414 }, 1415 [EM2800_BOARD_TERRATEC_CINERGY_200] = { 1416 .name = "Terratec Cinergy 200 USB", 1417 .is_em2800 = 1, 1418 .has_ir_i2c = 1, 1419 .tuner_type = TUNER_LG_TALN, 1420 .tda9887_conf = TDA9887_PRESENT, 1421 .decoder = EM28XX_SAA711X, 1422 .input = { { 1423 .type = EM28XX_VMUX_TELEVISION, 1424 .vmux = SAA7115_COMPOSITE2, 1425 .amux = EM28XX_AMUX_VIDEO, 1426 }, { 1427 .type = EM28XX_VMUX_COMPOSITE, 1428 .vmux = SAA7115_COMPOSITE0, 1429 .amux = EM28XX_AMUX_LINE_IN, 1430 }, { 1431 .type = EM28XX_VMUX_SVIDEO, 1432 .vmux = SAA7115_SVIDEO3, 1433 .amux = EM28XX_AMUX_LINE_IN, 1434 } }, 1435 }, 1436 [EM2800_BOARD_GRABBEEX_USB2800] = { 1437 .name = "eMPIA Technology, Inc. GrabBeeX+ Video Encoder", 1438 .is_em2800 = 1, 1439 .decoder = EM28XX_SAA711X, 1440 .tuner_type = TUNER_ABSENT, /* capture only board */ 1441 .input = { { 1442 .type = EM28XX_VMUX_COMPOSITE, 1443 .vmux = SAA7115_COMPOSITE0, 1444 .amux = EM28XX_AMUX_LINE_IN, 1445 }, { 1446 .type = EM28XX_VMUX_SVIDEO, 1447 .vmux = SAA7115_SVIDEO3, 1448 .amux = EM28XX_AMUX_LINE_IN, 1449 } }, 1450 }, 1451 [EM2800_BOARD_VC211A] = { 1452 .name = "Actionmaster/LinXcel/Digitus VC211A", 1453 .is_em2800 = 1, 1454 .tuner_type = TUNER_ABSENT, /* Capture-only board */ 1455 .decoder = EM28XX_SAA711X, 1456 .input = { { 1457 .type = EM28XX_VMUX_COMPOSITE, 1458 .vmux = SAA7115_COMPOSITE0, 1459 .amux = EM28XX_AMUX_LINE_IN, 1460 .gpio = vc211a_enable, 1461 }, { 1462 .type = EM28XX_VMUX_SVIDEO, 1463 .vmux = SAA7115_SVIDEO3, 1464 .amux = EM28XX_AMUX_LINE_IN, 1465 .gpio = vc211a_enable, 1466 } }, 1467 }, 1468 [EM2800_BOARD_LEADTEK_WINFAST_USBII] = { 1469 .name = "Leadtek Winfast USB II", 1470 .is_em2800 = 1, 1471 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1472 .tda9887_conf = TDA9887_PRESENT, 1473 .decoder = EM28XX_SAA711X, 1474 .input = { { 1475 .type = EM28XX_VMUX_TELEVISION, 1476 .vmux = SAA7115_COMPOSITE2, 1477 .amux = EM28XX_AMUX_VIDEO, 1478 }, { 1479 .type = EM28XX_VMUX_COMPOSITE, 1480 .vmux = SAA7115_COMPOSITE0, 1481 .amux = EM28XX_AMUX_LINE_IN, 1482 }, { 1483 .type = EM28XX_VMUX_SVIDEO, 1484 .vmux = SAA7115_SVIDEO3, 1485 .amux = EM28XX_AMUX_LINE_IN, 1486 } }, 1487 }, 1488 [EM2800_BOARD_KWORLD_USB2800] = { 1489 .name = "Kworld USB2800", 1490 .is_em2800 = 1, 1491 .tuner_type = TUNER_PHILIPS_FCV1236D, 1492 .tda9887_conf = TDA9887_PRESENT, 1493 .decoder = EM28XX_SAA711X, 1494 .input = { { 1495 .type = EM28XX_VMUX_TELEVISION, 1496 .vmux = SAA7115_COMPOSITE2, 1497 .amux = EM28XX_AMUX_VIDEO, 1498 }, { 1499 .type = EM28XX_VMUX_COMPOSITE, 1500 .vmux = SAA7115_COMPOSITE0, 1501 .amux = EM28XX_AMUX_LINE_IN, 1502 }, { 1503 .type = EM28XX_VMUX_SVIDEO, 1504 .vmux = SAA7115_SVIDEO3, 1505 .amux = EM28XX_AMUX_LINE_IN, 1506 } }, 1507 }, 1508 [EM2820_BOARD_PINNACLE_DVC_90] = { 1509 .name = "Pinnacle Dazzle DVC 90/100/101/107 / Kaiser Baas Video to DVD maker " 1510 "/ Kworld DVD Maker 2 / Plextor ConvertX PX-AV100U", 1511 .tuner_type = TUNER_ABSENT, /* capture only board */ 1512 .decoder = EM28XX_SAA711X, 1513 .input = { { 1514 .type = EM28XX_VMUX_COMPOSITE, 1515 .vmux = SAA7115_COMPOSITE0, 1516 .amux = EM28XX_AMUX_LINE_IN, 1517 }, { 1518 .type = EM28XX_VMUX_SVIDEO, 1519 .vmux = SAA7115_SVIDEO3, 1520 .amux = EM28XX_AMUX_LINE_IN, 1521 } }, 1522 }, 1523 [EM2800_BOARD_VGEAR_POCKETTV] = { 1524 .name = "V-Gear PocketTV", 1525 .is_em2800 = 1, 1526 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1527 .tda9887_conf = TDA9887_PRESENT, 1528 .decoder = EM28XX_SAA711X, 1529 .input = { { 1530 .type = EM28XX_VMUX_TELEVISION, 1531 .vmux = SAA7115_COMPOSITE2, 1532 .amux = EM28XX_AMUX_VIDEO, 1533 }, { 1534 .type = EM28XX_VMUX_COMPOSITE, 1535 .vmux = SAA7115_COMPOSITE0, 1536 .amux = EM28XX_AMUX_LINE_IN, 1537 }, { 1538 .type = EM28XX_VMUX_SVIDEO, 1539 .vmux = SAA7115_SVIDEO3, 1540 .amux = EM28XX_AMUX_LINE_IN, 1541 } }, 1542 }, 1543 [EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2] = { 1544 .name = "Pixelview PlayTV Box 4 USB 2.0", 1545 .tda9887_conf = TDA9887_PRESENT, 1546 .tuner_type = TUNER_YMEC_TVF_5533MF, 1547 .decoder = EM28XX_SAA711X, 1548 .input = { { 1549 .type = EM28XX_VMUX_TELEVISION, 1550 .vmux = SAA7115_COMPOSITE2, 1551 .amux = EM28XX_AMUX_VIDEO, 1552 .aout = EM28XX_AOUT_MONO | /* I2S */ 1553 EM28XX_AOUT_MASTER, /* Line out pin */ 1554 }, { 1555 .type = EM28XX_VMUX_COMPOSITE, 1556 .vmux = SAA7115_COMPOSITE0, 1557 .amux = EM28XX_AMUX_LINE_IN, 1558 }, { 1559 .type = EM28XX_VMUX_SVIDEO, 1560 .vmux = SAA7115_SVIDEO3, 1561 .amux = EM28XX_AMUX_LINE_IN, 1562 } }, 1563 }, 1564 [EM2820_BOARD_PROLINK_PLAYTV_USB2] = { 1565 .name = "SIIG AVTuner-PVR / Pixelview Prolink PlayTV USB 2.0", 1566 .buttons = std_snapshot_button, 1567 .tda9887_conf = TDA9887_PRESENT, 1568 .tuner_type = TUNER_YMEC_TVF_5533MF, 1569 .tuner_addr = 0x60, 1570 .decoder = EM28XX_SAA711X, 1571 .input = { { 1572 .type = EM28XX_VMUX_TELEVISION, 1573 .vmux = SAA7115_COMPOSITE2, 1574 .amux = EM28XX_AMUX_VIDEO, 1575 .aout = EM28XX_AOUT_MONO | /* I2S */ 1576 EM28XX_AOUT_MASTER, /* Line out pin */ 1577 }, { 1578 .type = EM28XX_VMUX_COMPOSITE, 1579 .vmux = SAA7115_COMPOSITE0, 1580 .amux = EM28XX_AMUX_LINE_IN, 1581 }, { 1582 .type = EM28XX_VMUX_SVIDEO, 1583 .vmux = SAA7115_SVIDEO3, 1584 .amux = EM28XX_AMUX_LINE_IN, 1585 } }, 1586 }, 1587 [EM2860_BOARD_SAA711X_REFERENCE_DESIGN] = { 1588 .name = "EM2860/SAA711X Reference Design", 1589 .buttons = std_snapshot_button, 1590 .tuner_type = TUNER_ABSENT, 1591 .decoder = EM28XX_SAA711X, 1592 .input = { { 1593 .type = EM28XX_VMUX_SVIDEO, 1594 .vmux = SAA7115_SVIDEO3, 1595 }, { 1596 .type = EM28XX_VMUX_COMPOSITE, 1597 .vmux = SAA7115_COMPOSITE0, 1598 } }, 1599 }, 1600 1601 [EM2874_BOARD_LEADERSHIP_ISDBT] = { 1602 .def_i2c_bus = 1, 1603 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1604 EM28XX_I2C_FREQ_100_KHZ, 1605 .xclk = EM28XX_XCLK_FREQUENCY_10MHZ, 1606 .name = "EM2874 Leadership ISDBT", 1607 .tuner_type = TUNER_ABSENT, 1608 .tuner_gpio = leadership_reset, 1609 .dvb_gpio = leadership_digital, 1610 .has_dvb = 1, 1611 }, 1612 1613 [EM2880_BOARD_MSI_DIGIVOX_AD] = { 1614 .name = "MSI DigiVox A/D", 1615 .valid = EM28XX_BOARD_NOT_VALIDATED, 1616 .tuner_type = TUNER_XC2028, 1617 .tuner_gpio = default_tuner_gpio, 1618 .decoder = EM28XX_TVP5150, 1619 .input = { { 1620 .type = EM28XX_VMUX_TELEVISION, 1621 .vmux = TVP5150_COMPOSITE0, 1622 .amux = EM28XX_AMUX_VIDEO, 1623 .gpio = em2880_msi_digivox_ad_analog, 1624 }, { 1625 .type = EM28XX_VMUX_COMPOSITE, 1626 .vmux = TVP5150_COMPOSITE1, 1627 .amux = EM28XX_AMUX_LINE_IN, 1628 .gpio = em2880_msi_digivox_ad_analog, 1629 }, { 1630 .type = EM28XX_VMUX_SVIDEO, 1631 .vmux = TVP5150_SVIDEO, 1632 .amux = EM28XX_AMUX_LINE_IN, 1633 .gpio = em2880_msi_digivox_ad_analog, 1634 } }, 1635 }, 1636 [EM2880_BOARD_MSI_DIGIVOX_AD_II] = { 1637 .name = "MSI DigiVox A/D II", 1638 .valid = EM28XX_BOARD_NOT_VALIDATED, 1639 .tuner_type = TUNER_XC2028, 1640 .tuner_gpio = default_tuner_gpio, 1641 .decoder = EM28XX_TVP5150, 1642 .input = { { 1643 .type = EM28XX_VMUX_TELEVISION, 1644 .vmux = TVP5150_COMPOSITE0, 1645 .amux = EM28XX_AMUX_VIDEO, 1646 .gpio = em2880_msi_digivox_ad_analog, 1647 }, { 1648 .type = EM28XX_VMUX_COMPOSITE, 1649 .vmux = TVP5150_COMPOSITE1, 1650 .amux = EM28XX_AMUX_LINE_IN, 1651 .gpio = em2880_msi_digivox_ad_analog, 1652 }, { 1653 .type = EM28XX_VMUX_SVIDEO, 1654 .vmux = TVP5150_SVIDEO, 1655 .amux = EM28XX_AMUX_LINE_IN, 1656 .gpio = em2880_msi_digivox_ad_analog, 1657 } }, 1658 }, 1659 [EM2880_BOARD_KWORLD_DVB_305U] = { 1660 .name = "KWorld DVB-T 305U", 1661 .tuner_type = TUNER_XC2028, 1662 .tuner_gpio = default_tuner_gpio, 1663 .decoder = EM28XX_TVP5150, 1664 .input = { { 1665 .type = EM28XX_VMUX_TELEVISION, 1666 .vmux = TVP5150_COMPOSITE0, 1667 .amux = EM28XX_AMUX_VIDEO, 1668 }, { 1669 .type = EM28XX_VMUX_COMPOSITE, 1670 .vmux = TVP5150_COMPOSITE1, 1671 .amux = EM28XX_AMUX_LINE_IN, 1672 }, { 1673 .type = EM28XX_VMUX_SVIDEO, 1674 .vmux = TVP5150_SVIDEO, 1675 .amux = EM28XX_AMUX_LINE_IN, 1676 } }, 1677 }, 1678 [EM2880_BOARD_KWORLD_DVB_310U] = { 1679 .name = "KWorld DVB-T 310U", 1680 .tuner_type = TUNER_XC2028, 1681 .tuner_gpio = default_tuner_gpio, 1682 .has_dvb = 1, 1683 .dvb_gpio = default_digital, 1684 .mts_firmware = 1, 1685 .decoder = EM28XX_TVP5150, 1686 .input = { { 1687 .type = EM28XX_VMUX_TELEVISION, 1688 .vmux = TVP5150_COMPOSITE0, 1689 .amux = EM28XX_AMUX_VIDEO, 1690 .gpio = default_analog, 1691 }, { 1692 .type = EM28XX_VMUX_COMPOSITE, 1693 .vmux = TVP5150_COMPOSITE1, 1694 .amux = EM28XX_AMUX_LINE_IN, 1695 .gpio = default_analog, 1696 }, { /* S-video has not been tested yet */ 1697 .type = EM28XX_VMUX_SVIDEO, 1698 .vmux = TVP5150_SVIDEO, 1699 .amux = EM28XX_AMUX_LINE_IN, 1700 .gpio = default_analog, 1701 } }, 1702 }, 1703 [EM2882_BOARD_KWORLD_ATSC_315U] = { 1704 .name = "KWorld ATSC 315U HDTV TV Box", 1705 .valid = EM28XX_BOARD_NOT_VALIDATED, 1706 .tuner_type = TUNER_THOMSON_DTT761X, 1707 .tuner_gpio = em2882_kworld_315u_tuner_gpio, 1708 .tda9887_conf = TDA9887_PRESENT, 1709 .decoder = EM28XX_SAA711X, 1710 .has_dvb = 1, 1711 .dvb_gpio = em2882_kworld_315u_digital, 1712 .ir_codes = RC_MAP_KWORLD_315U, 1713 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1714 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE, 1715 /* Analog mode - still not ready */ 1716 /*.input = { { 1717 .type = EM28XX_VMUX_TELEVISION, 1718 .vmux = SAA7115_COMPOSITE2, 1719 .amux = EM28XX_AMUX_VIDEO, 1720 .gpio = em2882_kworld_315u_analog, 1721 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1722 }, { 1723 .type = EM28XX_VMUX_COMPOSITE, 1724 .vmux = SAA7115_COMPOSITE0, 1725 .amux = EM28XX_AMUX_LINE_IN, 1726 .gpio = em2882_kworld_315u_analog1, 1727 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1728 }, { 1729 .type = EM28XX_VMUX_SVIDEO, 1730 .vmux = SAA7115_SVIDEO3, 1731 .amux = EM28XX_AMUX_LINE_IN, 1732 .gpio = em2882_kworld_315u_analog1, 1733 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1734 } }, */ 1735 }, 1736 [EM2880_BOARD_EMPIRE_DUAL_TV] = { 1737 .name = "Empire dual TV", 1738 .tuner_type = TUNER_XC2028, 1739 .tuner_gpio = default_tuner_gpio, 1740 .has_dvb = 1, 1741 .dvb_gpio = default_digital, 1742 .mts_firmware = 1, 1743 .decoder = EM28XX_TVP5150, 1744 .input = { { 1745 .type = EM28XX_VMUX_TELEVISION, 1746 .vmux = TVP5150_COMPOSITE0, 1747 .amux = EM28XX_AMUX_VIDEO, 1748 .gpio = default_analog, 1749 }, { 1750 .type = EM28XX_VMUX_COMPOSITE, 1751 .vmux = TVP5150_COMPOSITE1, 1752 .amux = EM28XX_AMUX_LINE_IN, 1753 .gpio = default_analog, 1754 }, { 1755 .type = EM28XX_VMUX_SVIDEO, 1756 .vmux = TVP5150_SVIDEO, 1757 .amux = EM28XX_AMUX_LINE_IN, 1758 .gpio = default_analog, 1759 } }, 1760 }, 1761 [EM2881_BOARD_DNT_DA2_HYBRID] = { 1762 .name = "DNT DA2 Hybrid", 1763 .valid = EM28XX_BOARD_NOT_VALIDATED, 1764 .tuner_type = TUNER_XC2028, 1765 .tuner_gpio = default_tuner_gpio, 1766 .decoder = EM28XX_TVP5150, 1767 .input = { { 1768 .type = EM28XX_VMUX_TELEVISION, 1769 .vmux = TVP5150_COMPOSITE0, 1770 .amux = EM28XX_AMUX_VIDEO, 1771 .gpio = default_analog, 1772 }, { 1773 .type = EM28XX_VMUX_COMPOSITE, 1774 .vmux = TVP5150_COMPOSITE1, 1775 .amux = EM28XX_AMUX_LINE_IN, 1776 .gpio = default_analog, 1777 }, { 1778 .type = EM28XX_VMUX_SVIDEO, 1779 .vmux = TVP5150_SVIDEO, 1780 .amux = EM28XX_AMUX_LINE_IN, 1781 .gpio = default_analog, 1782 } }, 1783 }, 1784 [EM2881_BOARD_PINNACLE_HYBRID_PRO] = { 1785 .name = "Pinnacle Hybrid Pro", 1786 .tuner_type = TUNER_XC2028, 1787 .tuner_gpio = default_tuner_gpio, 1788 .decoder = EM28XX_TVP5150, 1789 .has_dvb = 1, 1790 .dvb_gpio = pinnacle_hybrid_pro_digital, 1791 .input = { { 1792 .type = EM28XX_VMUX_TELEVISION, 1793 .vmux = TVP5150_COMPOSITE0, 1794 .amux = EM28XX_AMUX_VIDEO, 1795 .gpio = pinnacle_hybrid_pro_analog, 1796 }, { 1797 .type = EM28XX_VMUX_COMPOSITE, 1798 .vmux = TVP5150_COMPOSITE1, 1799 .amux = EM28XX_AMUX_LINE_IN, 1800 .gpio = pinnacle_hybrid_pro_analog, 1801 }, { 1802 .type = EM28XX_VMUX_SVIDEO, 1803 .vmux = TVP5150_SVIDEO, 1804 .amux = EM28XX_AMUX_LINE_IN, 1805 .gpio = pinnacle_hybrid_pro_analog, 1806 } }, 1807 }, 1808 [EM2882_BOARD_PINNACLE_HYBRID_PRO_330E] = { 1809 .name = "Pinnacle Hybrid Pro (330e)", 1810 .tuner_type = TUNER_XC2028, 1811 .tuner_gpio = default_tuner_gpio, 1812 .mts_firmware = 1, 1813 .has_dvb = 1, 1814 .dvb_gpio = hauppauge_wintv_hvr_900R2_digital, 1815 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 1816 .decoder = EM28XX_TVP5150, 1817 .input = { { 1818 .type = EM28XX_VMUX_TELEVISION, 1819 .vmux = TVP5150_COMPOSITE0, 1820 .amux = EM28XX_AMUX_VIDEO, 1821 .gpio = hauppauge_wintv_hvr_900_analog, 1822 }, { 1823 .type = EM28XX_VMUX_COMPOSITE, 1824 .vmux = TVP5150_COMPOSITE1, 1825 .amux = EM28XX_AMUX_LINE_IN, 1826 .gpio = hauppauge_wintv_hvr_900_analog, 1827 }, { 1828 .type = EM28XX_VMUX_SVIDEO, 1829 .vmux = TVP5150_SVIDEO, 1830 .amux = EM28XX_AMUX_LINE_IN, 1831 .gpio = hauppauge_wintv_hvr_900_analog, 1832 } }, 1833 }, 1834 [EM2882_BOARD_KWORLD_VS_DVBT] = { 1835 .name = "Kworld VS-DVB-T 323UR", 1836 .tuner_type = TUNER_XC2028, 1837 .tuner_gpio = default_tuner_gpio, 1838 .decoder = EM28XX_TVP5150, 1839 .mts_firmware = 1, 1840 .has_dvb = 1, 1841 .dvb_gpio = kworld_330u_digital, 1842 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 1843 .ir_codes = RC_MAP_KWORLD_315U, 1844 .input = { { 1845 .type = EM28XX_VMUX_TELEVISION, 1846 .vmux = TVP5150_COMPOSITE0, 1847 .amux = EM28XX_AMUX_VIDEO, 1848 }, { 1849 .type = EM28XX_VMUX_COMPOSITE, 1850 .vmux = TVP5150_COMPOSITE1, 1851 .amux = EM28XX_AMUX_LINE_IN, 1852 }, { 1853 .type = EM28XX_VMUX_SVIDEO, 1854 .vmux = TVP5150_SVIDEO, 1855 .amux = EM28XX_AMUX_LINE_IN, 1856 } }, 1857 }, 1858 [EM2882_BOARD_TERRATEC_HYBRID_XS] = { 1859 .name = "Terratec Cinnergy Hybrid T USB XS (em2882)", 1860 .tuner_type = TUNER_XC2028, 1861 .tuner_gpio = default_tuner_gpio, 1862 .mts_firmware = 1, 1863 .decoder = EM28XX_TVP5150, 1864 .has_dvb = 1, 1865 .dvb_gpio = hauppauge_wintv_hvr_900_digital, 1866 .ir_codes = RC_MAP_TERRATEC_CINERGY_XS, 1867 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1868 .input = { { 1869 .type = EM28XX_VMUX_TELEVISION, 1870 .vmux = TVP5150_COMPOSITE0, 1871 .amux = EM28XX_AMUX_VIDEO, 1872 .gpio = hauppauge_wintv_hvr_900_analog, 1873 }, { 1874 .type = EM28XX_VMUX_COMPOSITE, 1875 .vmux = TVP5150_COMPOSITE1, 1876 .amux = EM28XX_AMUX_LINE_IN, 1877 .gpio = hauppauge_wintv_hvr_900_analog, 1878 }, { 1879 .type = EM28XX_VMUX_SVIDEO, 1880 .vmux = TVP5150_SVIDEO, 1881 .amux = EM28XX_AMUX_LINE_IN, 1882 .gpio = hauppauge_wintv_hvr_900_analog, 1883 } }, 1884 }, 1885 [EM2882_BOARD_DIKOM_DK300] = { 1886 .name = "Dikom DK300", 1887 .tuner_type = TUNER_XC2028, 1888 .tuner_gpio = default_tuner_gpio, 1889 .decoder = EM28XX_TVP5150, 1890 .mts_firmware = 1, 1891 .has_dvb = 1, 1892 .dvb_gpio = dikom_dk300_digital, 1893 .input = { { 1894 .type = EM28XX_VMUX_TELEVISION, 1895 .vmux = TVP5150_COMPOSITE0, 1896 .amux = EM28XX_AMUX_VIDEO, 1897 .gpio = default_analog, 1898 } }, 1899 }, 1900 [EM2883_BOARD_KWORLD_HYBRID_330U] = { 1901 .name = "Kworld PlusTV HD Hybrid 330", 1902 .tuner_type = TUNER_XC2028, 1903 .tuner_gpio = default_tuner_gpio, 1904 .decoder = EM28XX_TVP5150, 1905 .mts_firmware = 1, 1906 .has_dvb = 1, 1907 .dvb_gpio = kworld_330u_digital, 1908 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 1909 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 1910 EM28XX_I2C_EEPROM_ON_BOARD | 1911 EM28XX_I2C_EEPROM_KEY_VALID, 1912 .input = { { 1913 .type = EM28XX_VMUX_TELEVISION, 1914 .vmux = TVP5150_COMPOSITE0, 1915 .amux = EM28XX_AMUX_VIDEO, 1916 .gpio = kworld_330u_analog, 1917 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1918 }, { 1919 .type = EM28XX_VMUX_COMPOSITE, 1920 .vmux = TVP5150_COMPOSITE1, 1921 .amux = EM28XX_AMUX_LINE_IN, 1922 .gpio = kworld_330u_analog, 1923 .aout = EM28XX_AOUT_PCM_IN | EM28XX_AOUT_PCM_STEREO, 1924 }, { 1925 .type = EM28XX_VMUX_SVIDEO, 1926 .vmux = TVP5150_SVIDEO, 1927 .amux = EM28XX_AMUX_LINE_IN, 1928 .gpio = kworld_330u_analog, 1929 } }, 1930 }, 1931 [EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU] = { 1932 .name = "Compro VideoMate ForYou/Stereo", 1933 .tuner_type = TUNER_LG_PAL_NEW_TAPC, 1934 .tvaudio_addr = 0xb0, 1935 .tda9887_conf = TDA9887_PRESENT, 1936 .decoder = EM28XX_TVP5150, 1937 .adecoder = EM28XX_TVAUDIO, 1938 .mute_gpio = compro_mute_gpio, 1939 .input = { { 1940 .type = EM28XX_VMUX_TELEVISION, 1941 .vmux = TVP5150_COMPOSITE0, 1942 .amux = EM28XX_AMUX_VIDEO, 1943 .gpio = compro_unmute_tv_gpio, 1944 }, { 1945 .type = EM28XX_VMUX_SVIDEO, 1946 .vmux = TVP5150_SVIDEO, 1947 .amux = EM28XX_AMUX_LINE_IN, 1948 .gpio = compro_unmute_svid_gpio, 1949 } }, 1950 }, 1951 [EM2860_BOARD_KAIOMY_TVNPC_U2] = { 1952 .name = "Kaiomy TVnPC U2", 1953 .vchannels = 3, 1954 .tuner_type = TUNER_XC2028, 1955 .tuner_addr = 0x61, 1956 .mts_firmware = 1, 1957 .decoder = EM28XX_TVP5150, 1958 .tuner_gpio = default_tuner_gpio, 1959 .ir_codes = RC_MAP_KAIOMY, 1960 .input = { { 1961 .type = EM28XX_VMUX_TELEVISION, 1962 .vmux = TVP5150_COMPOSITE0, 1963 .amux = EM28XX_AMUX_VIDEO, 1964 1965 }, { 1966 .type = EM28XX_VMUX_COMPOSITE, 1967 .vmux = TVP5150_COMPOSITE1, 1968 .amux = EM28XX_AMUX_LINE_IN, 1969 }, { 1970 .type = EM28XX_VMUX_SVIDEO, 1971 .vmux = TVP5150_SVIDEO, 1972 .amux = EM28XX_AMUX_LINE_IN, 1973 } }, 1974 .radio = { 1975 .type = EM28XX_RADIO, 1976 .amux = EM28XX_AMUX_LINE_IN, 1977 } 1978 }, 1979 [EM2860_BOARD_EASYCAP] = { 1980 .name = "Easy Cap Capture DC-60", 1981 .vchannels = 2, 1982 .tuner_type = TUNER_ABSENT, 1983 .decoder = EM28XX_SAA711X, 1984 .input = { { 1985 .type = EM28XX_VMUX_COMPOSITE, 1986 .vmux = SAA7115_COMPOSITE0, 1987 .amux = EM28XX_AMUX_LINE_IN, 1988 }, { 1989 .type = EM28XX_VMUX_SVIDEO, 1990 .vmux = SAA7115_SVIDEO3, 1991 .amux = EM28XX_AMUX_LINE_IN, 1992 } }, 1993 }, 1994 [EM2820_BOARD_IODATA_GVMVP_SZ] = { 1995 .name = "IO-DATA GV-MVP/SZ", 1996 .tuner_type = TUNER_PHILIPS_FM1236_MK3, 1997 .tuner_gpio = default_tuner_gpio, 1998 .tda9887_conf = TDA9887_PRESENT, 1999 .decoder = EM28XX_TVP5150, 2000 .input = { { 2001 .type = EM28XX_VMUX_TELEVISION, 2002 .vmux = TVP5150_COMPOSITE0, 2003 .amux = EM28XX_AMUX_VIDEO, 2004 }, { /* Composite has not been tested yet */ 2005 .type = EM28XX_VMUX_COMPOSITE, 2006 .vmux = TVP5150_COMPOSITE1, 2007 .amux = EM28XX_AMUX_VIDEO, 2008 }, { /* S-video has not been tested yet */ 2009 .type = EM28XX_VMUX_SVIDEO, 2010 .vmux = TVP5150_SVIDEO, 2011 .amux = EM28XX_AMUX_VIDEO, 2012 } }, 2013 }, 2014 [EM2860_BOARD_TERRATEC_GRABBY] = { 2015 .name = "Terratec Grabby", 2016 .vchannels = 2, 2017 .tuner_type = TUNER_ABSENT, 2018 .decoder = EM28XX_SAA711X, 2019 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2020 .input = { { 2021 .type = EM28XX_VMUX_COMPOSITE, 2022 .vmux = SAA7115_COMPOSITE0, 2023 .amux = EM28XX_AMUX_LINE_IN, 2024 }, { 2025 .type = EM28XX_VMUX_SVIDEO, 2026 .vmux = SAA7115_SVIDEO3, 2027 .amux = EM28XX_AMUX_LINE_IN, 2028 } }, 2029 .buttons = std_snapshot_button, 2030 .leds = terratec_grabby_leds, 2031 }, 2032 [EM2860_BOARD_TERRATEC_AV350] = { 2033 .name = "Terratec AV350", 2034 .vchannels = 2, 2035 .tuner_type = TUNER_ABSENT, 2036 .decoder = EM28XX_TVP5150, 2037 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, 2038 .mute_gpio = terratec_av350_mute_gpio, 2039 .input = { { 2040 .type = EM28XX_VMUX_COMPOSITE, 2041 .vmux = TVP5150_COMPOSITE1, 2042 .amux = EM28XX_AUDIO_SRC_LINE, 2043 .gpio = terratec_av350_unmute_gpio, 2044 2045 }, { 2046 .type = EM28XX_VMUX_SVIDEO, 2047 .vmux = TVP5150_SVIDEO, 2048 .amux = EM28XX_AUDIO_SRC_LINE, 2049 .gpio = terratec_av350_unmute_gpio, 2050 } }, 2051 }, 2052 2053 [EM2860_BOARD_ELGATO_VIDEO_CAPTURE] = { 2054 .name = "Elgato Video Capture", 2055 .decoder = EM28XX_SAA711X, 2056 .tuner_type = TUNER_ABSENT, /* Capture only device */ 2057 .input = { { 2058 .type = EM28XX_VMUX_COMPOSITE, 2059 .vmux = SAA7115_COMPOSITE0, 2060 .amux = EM28XX_AMUX_LINE_IN, 2061 }, { 2062 .type = EM28XX_VMUX_SVIDEO, 2063 .vmux = SAA7115_SVIDEO3, 2064 .amux = EM28XX_AMUX_LINE_IN, 2065 } }, 2066 }, 2067 2068 [EM2882_BOARD_EVGA_INDTUBE] = { 2069 .name = "Evga inDtube", 2070 .tuner_type = TUNER_XC2028, 2071 .tuner_gpio = default_tuner_gpio, 2072 .decoder = EM28XX_TVP5150, 2073 .xclk = EM28XX_XCLK_FREQUENCY_12MHZ, /* NEC IR */ 2074 .mts_firmware = 1, 2075 .has_dvb = 1, 2076 .dvb_gpio = evga_indtube_digital, 2077 .ir_codes = RC_MAP_EVGA_INDTUBE, 2078 .input = { { 2079 .type = EM28XX_VMUX_TELEVISION, 2080 .vmux = TVP5150_COMPOSITE0, 2081 .amux = EM28XX_AMUX_VIDEO, 2082 .gpio = evga_indtube_analog, 2083 }, { 2084 .type = EM28XX_VMUX_COMPOSITE, 2085 .vmux = TVP5150_COMPOSITE1, 2086 .amux = EM28XX_AMUX_LINE_IN, 2087 .gpio = evga_indtube_analog, 2088 }, { 2089 .type = EM28XX_VMUX_SVIDEO, 2090 .vmux = TVP5150_SVIDEO, 2091 .amux = EM28XX_AMUX_LINE_IN, 2092 .gpio = evga_indtube_analog, 2093 } }, 2094 }, 2095 /* eb1a:2868 Empia EM2870 + Philips CU1216L NIM (Philips TDA10023 + 2096 Infineon TUA6034) */ 2097 [EM2870_BOARD_REDDO_DVB_C_USB_BOX] = { 2098 .name = "Reddo DVB-C USB TV Box", 2099 .tuner_type = TUNER_ABSENT, 2100 .tuner_gpio = reddo_dvb_c_usb_box, 2101 .has_dvb = 1, 2102 }, 2103 /* 1b80:a340 - Empia EM2870, NXP TDA18271HD and LG DT3304, sold 2104 * initially as the KWorld PlusTV 340U, then as the UB435-Q. 2105 * Early variants have a TDA18271HD/C1, later ones a TDA18271HD/C2 */ 2106 [EM2870_BOARD_KWORLD_A340] = { 2107 .name = "KWorld PlusTV 340U or UB435-Q (ATSC)", 2108 .tuner_type = TUNER_ABSENT, /* Digital-only TDA18271HD */ 2109 .has_dvb = 1, 2110 .dvb_gpio = kworld_a340_digital, 2111 .tuner_gpio = default_tuner_gpio, 2112 }, 2113 /* 2013:024f PCTV nanoStick T2 290e. 2114 * Empia EM28174, Sony CXD2820R and NXP TDA18271HD/C2 */ 2115 [EM28174_BOARD_PCTV_290E] = { 2116 .name = "PCTV nanoStick T2 290e", 2117 .def_i2c_bus = 1, 2118 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_100_KHZ, 2119 .tuner_type = TUNER_ABSENT, 2120 .tuner_gpio = pctv_290e, 2121 .has_dvb = 1, 2122 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2123 }, 2124 /* 2013:024f PCTV DVB-S2 Stick 460e 2125 * Empia EM28174, NXP TDA10071, Conexant CX24118A and Allegro A8293 */ 2126 [EM28174_BOARD_PCTV_460E] = { 2127 .def_i2c_bus = 1, 2128 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2129 .name = "PCTV DVB-S2 Stick (460e)", 2130 .tuner_type = TUNER_ABSENT, 2131 .tuner_gpio = pctv_460e, 2132 .has_dvb = 1, 2133 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2134 }, 2135 /* eb1a:5006 Honestech VIDBOX NW03 2136 * Empia EM2860, Philips SAA7113, Empia EMP202, No Tuner */ 2137 [EM2860_BOARD_HT_VIDBOX_NW03] = { 2138 .name = "Honestech Vidbox NW03", 2139 .tuner_type = TUNER_ABSENT, 2140 .decoder = EM28XX_SAA711X, 2141 .input = { { 2142 .type = EM28XX_VMUX_COMPOSITE, 2143 .vmux = SAA7115_COMPOSITE0, 2144 .amux = EM28XX_AMUX_LINE_IN, 2145 }, { 2146 .type = EM28XX_VMUX_SVIDEO, 2147 .vmux = SAA7115_SVIDEO3, /* S-VIDEO needs confirming */ 2148 .amux = EM28XX_AMUX_LINE_IN, 2149 } }, 2150 }, 2151 /* 1b80:e425 MaxMedia UB425-TC 2152 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 */ 2153 [EM2874_BOARD_MAXMEDIA_UB425_TC] = { 2154 .name = "MaxMedia UB425-TC", 2155 .tuner_type = TUNER_ABSENT, 2156 .tuner_gpio = maxmedia_ub425_tc, 2157 .has_dvb = 1, 2158 .ir_codes = RC_MAP_REDDO, 2159 .def_i2c_bus = 1, 2160 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2161 EM28XX_I2C_FREQ_400_KHZ, 2162 }, 2163 /* 2304:0242 PCTV QuatroStick (510e) 2164 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ 2165 [EM2884_BOARD_PCTV_510E] = { 2166 .name = "PCTV QuatroStick (510e)", 2167 .tuner_type = TUNER_ABSENT, 2168 .tuner_gpio = pctv_510e, 2169 .has_dvb = 1, 2170 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2171 .def_i2c_bus = 1, 2172 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2173 EM28XX_I2C_FREQ_400_KHZ, 2174 }, 2175 /* 2013:0251 PCTV QuatroStick nano (520e) 2176 * Empia EM2884 + Micronas DRX 3926K + NXP TDA18271HDC2 */ 2177 [EM2884_BOARD_PCTV_520E] = { 2178 .name = "PCTV QuatroStick nano (520e)", 2179 .tuner_type = TUNER_ABSENT, 2180 .tuner_gpio = pctv_520e, 2181 .has_dvb = 1, 2182 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2183 .def_i2c_bus = 1, 2184 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2185 EM28XX_I2C_FREQ_400_KHZ, 2186 }, 2187 [EM2884_BOARD_TERRATEC_HTC_USB_XS] = { 2188 .name = "Terratec Cinergy HTC USB XS", 2189 .has_dvb = 1, 2190 .ir_codes = RC_MAP_NEC_TERRATEC_CINERGY_XS, 2191 .tuner_type = TUNER_ABSENT, 2192 .def_i2c_bus = 1, 2193 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2194 EM28XX_I2C_FREQ_400_KHZ, 2195 }, 2196 /* 1b80:e1cc Delock 61959 2197 * Empia EM2874B + Micronas DRX 3913KA2 + NXP TDA18271HDC2 2198 * mostly the same as MaxMedia UB-425-TC but different remote */ 2199 [EM2874_BOARD_DELOCK_61959] = { 2200 .name = "Delock 61959", 2201 .tuner_type = TUNER_ABSENT, 2202 .tuner_gpio = maxmedia_ub425_tc, 2203 .has_dvb = 1, 2204 .ir_codes = RC_MAP_DELOCK_61959, 2205 .def_i2c_bus = 1, 2206 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2207 EM28XX_I2C_FREQ_400_KHZ, 2208 }, 2209 /* 2210 * 1b80:e346 KWorld USB ATSC TV Stick UB435-Q V2 2211 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2212 */ 2213 [EM2874_BOARD_KWORLD_UB435Q_V2] = { 2214 .name = "KWorld USB ATSC TV Stick UB435-Q V2", 2215 .tuner_type = TUNER_ABSENT, 2216 .has_dvb = 1, 2217 .dvb_gpio = kworld_a340_digital, 2218 .tuner_gpio = default_tuner_gpio, 2219 .def_i2c_bus = 1, 2220 }, 2221 /* 2222 * 1b80:e34c KWorld USB ATSC TV Stick UB435-Q V3 2223 * Empia EM2874B + LG DT3305 + NXP TDA18271HDC2 2224 */ 2225 [EM2874_BOARD_KWORLD_UB435Q_V3] = { 2226 .name = "KWorld USB ATSC TV Stick UB435-Q V3", 2227 .tuner_type = TUNER_ABSENT, 2228 .has_dvb = 1, 2229 .tuner_gpio = kworld_ub435q_v3_digital, 2230 .def_i2c_bus = 1, 2231 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2232 EM28XX_I2C_FREQ_100_KHZ, 2233 .leds = kworld_ub435q_v3_leds, 2234 }, 2235 [EM2874_BOARD_PCTV_HD_MINI_80E] = { 2236 .name = "Pinnacle PCTV HD Mini", 2237 .tuner_type = TUNER_ABSENT, 2238 .has_dvb = 1, 2239 .dvb_gpio = em2874_pctv_80e_digital, 2240 .decoder = EM28XX_NODECODER, 2241 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2242 .leds = pctv_80e_leds, 2243 }, 2244 /* 1ae7:9003/9004 SpeedLink Vicious And Devine Laplace webcam 2245 * Empia EM2765 + OmniVision OV2640 */ 2246 [EM2765_BOARD_SPEEDLINK_VAD_LAPLACE] = { 2247 .name = "SpeedLink Vicious And Devine Laplace webcam", 2248 .xclk = EM28XX_XCLK_FREQUENCY_24MHZ, 2249 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2250 EM28XX_I2C_FREQ_100_KHZ, 2251 .def_i2c_bus = 1, 2252 .tuner_type = TUNER_ABSENT, 2253 .is_webcam = 1, 2254 .input = { { 2255 .type = EM28XX_VMUX_COMPOSITE, 2256 .amux = EM28XX_AMUX_VIDEO, 2257 .gpio = speedlink_vad_laplace_reg_seq, 2258 } }, 2259 .buttons = speedlink_vad_laplace_buttons, 2260 .leds = speedlink_vad_laplace_leds, 2261 }, 2262 /* 2013:0258 PCTV DVB-S2 Stick (461e) 2263 * Empia EM28178, Montage M88DS3103, Montage M88TS2022, Allegro A8293 */ 2264 [EM28178_BOARD_PCTV_461E] = { 2265 .def_i2c_bus = 1, 2266 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2267 .name = "PCTV DVB-S2 Stick (461e)", 2268 .tuner_type = TUNER_ABSENT, 2269 .tuner_gpio = pctv_461e, 2270 .has_dvb = 1, 2271 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2272 }, 2273 /* 2013:025f PCTV tripleStick (292e). 2274 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2157 */ 2275 [EM28178_BOARD_PCTV_292E] = { 2276 .name = "PCTV tripleStick (292e)", 2277 .def_i2c_bus = 1, 2278 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2279 .tuner_type = TUNER_ABSENT, 2280 .tuner_gpio = pctv_292e, 2281 .has_dvb = 1, 2282 .ir_codes = RC_MAP_PINNACLE_PCTV_HD, 2283 }, 2284 [EM2861_BOARD_LEADTEK_VC100] = { 2285 .name = "Leadtek VC100", 2286 .tuner_type = TUNER_ABSENT, /* Capture only device */ 2287 .decoder = EM28XX_TVP5150, 2288 .input = { { 2289 .type = EM28XX_VMUX_COMPOSITE, 2290 .vmux = TVP5150_COMPOSITE1, 2291 .amux = EM28XX_AMUX_LINE_IN, 2292 }, { 2293 .type = EM28XX_VMUX_SVIDEO, 2294 .vmux = TVP5150_SVIDEO, 2295 .amux = EM28XX_AMUX_LINE_IN, 2296 } }, 2297 }, 2298 /* eb1a:8179 Terratec Cinergy T2 Stick HD. 2299 * Empia EM28178, Silicon Labs Si2168, Silicon Labs Si2146 */ 2300 [EM28178_BOARD_TERRATEC_T2_STICK_HD] = { 2301 .name = "Terratec Cinergy T2 Stick HD", 2302 .def_i2c_bus = 1, 2303 .i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | EM28XX_I2C_FREQ_400_KHZ, 2304 .tuner_type = TUNER_ABSENT, 2305 .tuner_gpio = terratec_t2_stick_hd, 2306 .has_dvb = 1, 2307 .ir_codes = RC_MAP_TERRATEC_SLIM_2, 2308 }, 2309 }; 2310 EXPORT_SYMBOL_GPL(em28xx_boards); 2311 2312 static const unsigned int em28xx_bcount = ARRAY_SIZE(em28xx_boards); 2313 2314 /* table of devices that work with this driver */ 2315 struct usb_device_id em28xx_id_table[] = { 2316 { USB_DEVICE(0xeb1a, 0x2750), 2317 .driver_info = EM2750_BOARD_UNKNOWN }, 2318 { USB_DEVICE(0xeb1a, 0x2751), 2319 .driver_info = EM2750_BOARD_UNKNOWN }, 2320 { USB_DEVICE(0xeb1a, 0x2800), 2321 .driver_info = EM2800_BOARD_UNKNOWN }, 2322 { USB_DEVICE(0xeb1a, 0x2710), 2323 .driver_info = EM2820_BOARD_UNKNOWN }, 2324 { USB_DEVICE(0xeb1a, 0x2820), 2325 .driver_info = EM2820_BOARD_UNKNOWN }, 2326 { USB_DEVICE(0xeb1a, 0x2821), 2327 .driver_info = EM2820_BOARD_UNKNOWN }, 2328 { USB_DEVICE(0xeb1a, 0x2860), 2329 .driver_info = EM2820_BOARD_UNKNOWN }, 2330 { USB_DEVICE(0xeb1a, 0x2861), 2331 .driver_info = EM2820_BOARD_UNKNOWN }, 2332 { USB_DEVICE(0xeb1a, 0x2862), 2333 .driver_info = EM2820_BOARD_UNKNOWN }, 2334 { USB_DEVICE(0xeb1a, 0x2863), 2335 .driver_info = EM2820_BOARD_UNKNOWN }, 2336 { USB_DEVICE(0xeb1a, 0x2870), 2337 .driver_info = EM2820_BOARD_UNKNOWN }, 2338 { USB_DEVICE(0xeb1a, 0x2881), 2339 .driver_info = EM2820_BOARD_UNKNOWN }, 2340 { USB_DEVICE(0xeb1a, 0x2883), 2341 .driver_info = EM2820_BOARD_UNKNOWN }, 2342 { USB_DEVICE(0xeb1a, 0x2868), 2343 .driver_info = EM2820_BOARD_UNKNOWN }, 2344 { USB_DEVICE(0xeb1a, 0x2875), 2345 .driver_info = EM2820_BOARD_UNKNOWN }, 2346 { USB_DEVICE(0xeb1a, 0x2885), /* MSI Digivox Trio */ 2347 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2348 { USB_DEVICE(0xeb1a, 0xe300), 2349 .driver_info = EM2861_BOARD_KWORLD_PVRTV_300U }, 2350 { USB_DEVICE(0xeb1a, 0xe303), 2351 .driver_info = EM2860_BOARD_KAIOMY_TVNPC_U2 }, 2352 { USB_DEVICE(0xeb1a, 0xe305), 2353 .driver_info = EM2880_BOARD_KWORLD_DVB_305U }, 2354 { USB_DEVICE(0xeb1a, 0xe310), 2355 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD }, 2356 { USB_DEVICE(0xeb1a, 0xa313), 2357 .driver_info = EM2882_BOARD_KWORLD_ATSC_315U }, 2358 { USB_DEVICE(0xeb1a, 0xa316), 2359 .driver_info = EM2883_BOARD_KWORLD_HYBRID_330U }, 2360 { USB_DEVICE(0xeb1a, 0xe320), 2361 .driver_info = EM2880_BOARD_MSI_DIGIVOX_AD_II }, 2362 { USB_DEVICE(0xeb1a, 0xe323), 2363 .driver_info = EM2882_BOARD_KWORLD_VS_DVBT }, 2364 { USB_DEVICE(0xeb1a, 0xe350), 2365 .driver_info = EM2870_BOARD_KWORLD_350U }, 2366 { USB_DEVICE(0xeb1a, 0xe355), 2367 .driver_info = EM2870_BOARD_KWORLD_355U }, 2368 { USB_DEVICE(0xeb1a, 0x2801), 2369 .driver_info = EM2800_BOARD_GRABBEEX_USB2800 }, 2370 { USB_DEVICE(0xeb1a, 0xe357), 2371 .driver_info = EM2870_BOARD_KWORLD_355U }, 2372 { USB_DEVICE(0xeb1a, 0xe359), 2373 .driver_info = EM2870_BOARD_KWORLD_355U }, 2374 { USB_DEVICE(0x1b80, 0xe302), 2375 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kaiser Baas Video to DVD maker */ 2376 { USB_DEVICE(0x1b80, 0xe304), 2377 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, /* Kworld DVD Maker 2 */ 2378 { USB_DEVICE(0x0ccd, 0x0036), 2379 .driver_info = EM2820_BOARD_TERRATEC_CINERGY_250 }, 2380 { USB_DEVICE(0x0ccd, 0x004c), 2381 .driver_info = EM2880_BOARD_TERRATEC_HYBRID_XS_FR }, 2382 { USB_DEVICE(0x0ccd, 0x004f), 2383 .driver_info = EM2860_BOARD_TERRATEC_HYBRID_XS }, 2384 { USB_DEVICE(0x0ccd, 0x005e), 2385 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2386 { USB_DEVICE(0x0ccd, 0x0042), 2387 .driver_info = EM2882_BOARD_TERRATEC_HYBRID_XS }, 2388 { USB_DEVICE(0x0ccd, 0x0043), 2389 .driver_info = EM2870_BOARD_TERRATEC_XS_MT2060 }, 2390 { USB_DEVICE(0x0ccd, 0x008e), /* Cinergy HTC USB XS Rev. 1 */ 2391 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2392 { USB_DEVICE(0x0ccd, 0x00ac), /* Cinergy HTC USB XS Rev. 2 */ 2393 .driver_info = EM2884_BOARD_TERRATEC_HTC_USB_XS }, 2394 { USB_DEVICE(0x0ccd, 0x10a2), /* H5 Rev. 1 */ 2395 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2396 { USB_DEVICE(0x0ccd, 0x10ad), /* H5 Rev. 2 */ 2397 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2398 { USB_DEVICE(0x0ccd, 0x10b6), /* H5 Rev. 3 */ 2399 .driver_info = EM2884_BOARD_TERRATEC_H5 }, 2400 { USB_DEVICE(0x0ccd, 0x0084), 2401 .driver_info = EM2860_BOARD_TERRATEC_AV350 }, 2402 { USB_DEVICE(0x0ccd, 0x0096), 2403 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2404 { USB_DEVICE(0x0ccd, 0x10AF), 2405 .driver_info = EM2860_BOARD_TERRATEC_GRABBY }, 2406 { USB_DEVICE(0x0ccd, 0x00b2), 2407 .driver_info = EM2884_BOARD_CINERGY_HTC_STICK }, 2408 { USB_DEVICE(0x0fd9, 0x0018), 2409 .driver_info = EM2884_BOARD_ELGATO_EYETV_HYBRID_2008 }, 2410 { USB_DEVICE(0x0fd9, 0x0033), 2411 .driver_info = EM2860_BOARD_ELGATO_VIDEO_CAPTURE }, 2412 { USB_DEVICE(0x185b, 0x2870), 2413 .driver_info = EM2870_BOARD_COMPRO_VIDEOMATE }, 2414 { USB_DEVICE(0x185b, 0x2041), 2415 .driver_info = EM2820_BOARD_COMPRO_VIDEOMATE_FORYOU }, 2416 { USB_DEVICE(0x2040, 0x4200), 2417 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2418 { USB_DEVICE(0x2040, 0x4201), 2419 .driver_info = EM2820_BOARD_HAUPPAUGE_WINTV_USB_2 }, 2420 { USB_DEVICE(0x2040, 0x6500), 2421 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900 }, 2422 { USB_DEVICE(0x2040, 0x6502), 2423 .driver_info = EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2 }, 2424 { USB_DEVICE(0x2040, 0x6513), /* HCW HVR-980 */ 2425 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2426 { USB_DEVICE(0x2040, 0x6517), /* HP HVR-950 */ 2427 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2428 { USB_DEVICE(0x2040, 0x651b), /* RP HVR-950 */ 2429 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950 }, 2430 { USB_DEVICE(0x2040, 0x651f), 2431 .driver_info = EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850 }, 2432 { USB_DEVICE(0x0438, 0xb002), 2433 .driver_info = EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600 }, 2434 { USB_DEVICE(0x2001, 0xf112), 2435 .driver_info = EM2820_BOARD_DLINK_USB_TV }, 2436 { USB_DEVICE(0x2304, 0x0207), 2437 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2438 { USB_DEVICE(0x2304, 0x0208), 2439 .driver_info = EM2820_BOARD_PINNACLE_USB_2 }, 2440 { USB_DEVICE(0x2304, 0x021a), 2441 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2442 { USB_DEVICE(0x2304, 0x0226), 2443 .driver_info = EM2882_BOARD_PINNACLE_HYBRID_PRO_330E }, 2444 { USB_DEVICE(0x2304, 0x0227), 2445 .driver_info = EM2880_BOARD_PINNACLE_PCTV_HD_PRO }, 2446 { USB_DEVICE(0x2304, 0x023f), 2447 .driver_info = EM2874_BOARD_PCTV_HD_MINI_80E }, 2448 { USB_DEVICE(0x0413, 0x6023), 2449 .driver_info = EM2800_BOARD_LEADTEK_WINFAST_USBII }, 2450 { USB_DEVICE(0x093b, 0xa003), 2451 .driver_info = EM2820_BOARD_PINNACLE_DVC_90 }, 2452 { USB_DEVICE(0x093b, 0xa005), 2453 .driver_info = EM2861_BOARD_PLEXTOR_PX_TV100U }, 2454 { USB_DEVICE(0x04bb, 0x0515), 2455 .driver_info = EM2820_BOARD_IODATA_GVMVP_SZ }, 2456 { USB_DEVICE(0xeb1a, 0x50a6), 2457 .driver_info = EM2860_BOARD_GADMEI_UTV330 }, 2458 { USB_DEVICE(0x1b80, 0xa340), 2459 .driver_info = EM2870_BOARD_KWORLD_A340 }, 2460 { USB_DEVICE(0x1b80, 0xe346), 2461 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V2 }, 2462 { USB_DEVICE(0x1b80, 0xe34c), 2463 .driver_info = EM2874_BOARD_KWORLD_UB435Q_V3 }, 2464 { USB_DEVICE(0x2013, 0x024f), 2465 .driver_info = EM28174_BOARD_PCTV_290E }, 2466 { USB_DEVICE(0x2013, 0x024c), 2467 .driver_info = EM28174_BOARD_PCTV_460E }, 2468 { USB_DEVICE(0x2040, 0x1605), 2469 .driver_info = EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C }, 2470 { USB_DEVICE(0x1b80, 0xe755), 2471 .driver_info = EM2884_BOARD_C3TECH_DIGITAL_DUO }, 2472 { USB_DEVICE(0xeb1a, 0x5006), 2473 .driver_info = EM2860_BOARD_HT_VIDBOX_NW03 }, 2474 { USB_DEVICE(0x1b80, 0xe309), /* Sveon STV40 */ 2475 .driver_info = EM2860_BOARD_EASYCAP }, 2476 { USB_DEVICE(0x1b80, 0xe425), 2477 .driver_info = EM2874_BOARD_MAXMEDIA_UB425_TC }, 2478 { USB_DEVICE(0x2304, 0x0242), 2479 .driver_info = EM2884_BOARD_PCTV_510E }, 2480 { USB_DEVICE(0x2013, 0x0251), 2481 .driver_info = EM2884_BOARD_PCTV_520E }, 2482 { USB_DEVICE(0x1b80, 0xe1cc), 2483 .driver_info = EM2874_BOARD_DELOCK_61959 }, 2484 { USB_DEVICE(0x1ae7, 0x9003), 2485 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2486 { USB_DEVICE(0x1ae7, 0x9004), 2487 .driver_info = EM2765_BOARD_SPEEDLINK_VAD_LAPLACE }, 2488 { USB_DEVICE(0x2013, 0x0258), 2489 .driver_info = EM28178_BOARD_PCTV_461E }, 2490 { USB_DEVICE(0x2013, 0x025f), 2491 .driver_info = EM28178_BOARD_PCTV_292E }, 2492 { USB_DEVICE(0x2040, 0x0264), /* Hauppauge WinTV-soloHD */ 2493 .driver_info = EM28178_BOARD_PCTV_292E }, 2494 { USB_DEVICE(0x0413, 0x6f07), 2495 .driver_info = EM2861_BOARD_LEADTEK_VC100 }, 2496 { USB_DEVICE(0xeb1a, 0x8179), 2497 .driver_info = EM28178_BOARD_TERRATEC_T2_STICK_HD }, 2498 { }, 2499 }; 2500 MODULE_DEVICE_TABLE(usb, em28xx_id_table); 2501 2502 /* 2503 * EEPROM hash table for devices with generic USB IDs 2504 */ 2505 static struct em28xx_hash_table em28xx_eeprom_hash[] = { 2506 /* P/N: SA 60002070465 Tuner: TVF7533-MF */ 2507 {0x6ce05a8f, EM2820_BOARD_PROLINK_PLAYTV_USB2, TUNER_YMEC_TVF_5533MF}, 2508 {0x72cc5a8b, EM2820_BOARD_PROLINK_PLAYTV_BOX4_USB2, TUNER_YMEC_TVF_5533MF}, 2509 {0x966a0441, EM2880_BOARD_KWORLD_DVB_310U, TUNER_XC2028}, 2510 {0x166a0441, EM2880_BOARD_EMPIRE_DUAL_TV, TUNER_XC2028}, 2511 {0xcee44a99, EM2882_BOARD_EVGA_INDTUBE, TUNER_XC2028}, 2512 {0xb8846b20, EM2881_BOARD_PINNACLE_HYBRID_PRO, TUNER_XC2028}, 2513 {0x63f653bd, EM2870_BOARD_REDDO_DVB_C_USB_BOX, TUNER_ABSENT}, 2514 {0x4e913442, EM2882_BOARD_DIKOM_DK300, TUNER_XC2028}, 2515 }; 2516 2517 /* I2C devicelist hash table for devices with generic USB IDs */ 2518 static struct em28xx_hash_table em28xx_i2c_hash[] = { 2519 {0xb06a32c3, EM2800_BOARD_TERRATEC_CINERGY_200, TUNER_LG_PAL_NEW_TAPC}, 2520 {0xf51200e3, EM2800_BOARD_VGEAR_POCKETTV, TUNER_LG_PAL_NEW_TAPC}, 2521 {0x1ba50080, EM2860_BOARD_SAA711X_REFERENCE_DESIGN, TUNER_ABSENT}, 2522 {0x77800080, EM2860_BOARD_TVP5150_REFERENCE_DESIGN, TUNER_ABSENT}, 2523 {0xc51200e3, EM2820_BOARD_GADMEI_TVR200, TUNER_LG_PAL_NEW_TAPC}, 2524 {0x4ba50080, EM2861_BOARD_GADMEI_UTV330PLUS, TUNER_TNF_5335MF}, 2525 {0x6b800080, EM2874_BOARD_LEADERSHIP_ISDBT, TUNER_ABSENT}, 2526 }; 2527 2528 /* NOTE: introduce a separate hash table for devices with 16 bit eeproms */ 2529 2530 int em28xx_tuner_callback(void *ptr, int component, int command, int arg) 2531 { 2532 struct em28xx_i2c_bus *i2c_bus = ptr; 2533 struct em28xx *dev = i2c_bus->dev; 2534 int rc = 0; 2535 2536 if (dev->tuner_type != TUNER_XC2028 && dev->tuner_type != TUNER_XC5000) 2537 return 0; 2538 2539 if (command != XC2028_TUNER_RESET && command != XC5000_TUNER_RESET) 2540 return 0; 2541 2542 rc = em28xx_gpio_set(dev, dev->board.tuner_gpio); 2543 2544 return rc; 2545 } 2546 EXPORT_SYMBOL_GPL(em28xx_tuner_callback); 2547 2548 static inline void em28xx_set_model(struct em28xx *dev) 2549 { 2550 dev->board = em28xx_boards[dev->model]; 2551 2552 /* Those are the default values for the majority of boards 2553 Use those values if not specified otherwise at boards entry 2554 */ 2555 if (!dev->board.xclk) 2556 dev->board.xclk = EM28XX_XCLK_IR_RC5_MODE | 2557 EM28XX_XCLK_FREQUENCY_12MHZ; 2558 2559 if (!dev->board.i2c_speed) 2560 dev->board.i2c_speed = EM28XX_I2C_CLK_WAIT_ENABLE | 2561 EM28XX_I2C_FREQ_100_KHZ; 2562 2563 /* Should be initialized early, for I2C to work */ 2564 dev->def_i2c_bus = dev->board.def_i2c_bus; 2565 } 2566 2567 /* Wait until AC97_RESET reports the expected value reliably before proceeding. 2568 * We also check that two unrelated registers accesses don't return the same 2569 * value to avoid premature return. 2570 * This procedure helps ensuring AC97 register accesses are reliable. 2571 */ 2572 static int em28xx_wait_until_ac97_features_equals(struct em28xx *dev, 2573 int expected_feat) 2574 { 2575 unsigned long timeout = jiffies + msecs_to_jiffies(2000); 2576 int feat, powerdown; 2577 2578 while (time_is_after_jiffies(timeout)) { 2579 feat = em28xx_read_ac97(dev, AC97_RESET); 2580 if (feat < 0) 2581 return feat; 2582 2583 powerdown = em28xx_read_ac97(dev, AC97_POWERDOWN); 2584 if (powerdown < 0) 2585 return powerdown; 2586 2587 if (feat == expected_feat && feat != powerdown) 2588 return 0; 2589 2590 msleep(50); 2591 } 2592 2593 em28xx_warn("AC97 registers access is not reliable !\n"); 2594 return -ETIMEDOUT; 2595 } 2596 2597 /* Since em28xx_pre_card_setup() requires a proper dev->model, 2598 * this won't work for boards with generic PCI IDs 2599 */ 2600 static void em28xx_pre_card_setup(struct em28xx *dev) 2601 { 2602 /* Set the initial XCLK and I2C clock values based on the board 2603 definition */ 2604 em28xx_write_reg(dev, EM28XX_R0F_XCLK, dev->board.xclk & 0x7f); 2605 if (!dev->board.is_em2800) 2606 em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); 2607 msleep(50); 2608 2609 /* request some modules */ 2610 switch (dev->model) { 2611 case EM2861_BOARD_PLEXTOR_PX_TV100U: 2612 /* Sets the msp34xx I2S speed */ 2613 dev->i2s_speed = 2048000; 2614 break; 2615 case EM2861_BOARD_KWORLD_PVRTV_300U: 2616 case EM2880_BOARD_KWORLD_DVB_305U: 2617 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x6d); 2618 msleep(10); 2619 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0x7d); 2620 msleep(10); 2621 break; 2622 case EM2870_BOARD_COMPRO_VIDEOMATE: 2623 /* TODO: someone can do some cleanup here... 2624 not everything's needed */ 2625 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2626 msleep(10); 2627 em28xx_write_reg(dev, EM2880_R04_GPO, 0x01); 2628 msleep(10); 2629 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2630 mdelay(70); 2631 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2632 mdelay(70); 2633 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xdc); 2634 mdelay(70); 2635 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfc); 2636 mdelay(70); 2637 break; 2638 case EM2870_BOARD_TERRATEC_XS_MT2060: 2639 /* this device needs some gpio writes to get the DVB-T 2640 demod work */ 2641 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2642 mdelay(70); 2643 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2644 mdelay(70); 2645 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2646 mdelay(70); 2647 break; 2648 case EM2870_BOARD_PINNACLE_PCTV_DVB: 2649 /* this device needs some gpio writes to get the 2650 DVB-T demod work */ 2651 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2652 mdelay(70); 2653 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xde); 2654 mdelay(70); 2655 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2656 mdelay(70); 2657 break; 2658 case EM2820_BOARD_GADMEI_UTV310: 2659 case EM2820_BOARD_MSI_VOX_USB_2: 2660 /* enables audio for that devices */ 2661 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2662 break; 2663 2664 case EM2882_BOARD_KWORLD_ATSC_315U: 2665 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 2666 msleep(10); 2667 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2668 msleep(10); 2669 em28xx_write_reg(dev, EM2880_R04_GPO, 0x00); 2670 msleep(10); 2671 em28xx_write_reg(dev, EM2880_R04_GPO, 0x08); 2672 msleep(10); 2673 break; 2674 2675 case EM2860_BOARD_KAIOMY_TVNPC_U2: 2676 em28xx_write_regs(dev, EM28XX_R0F_XCLK, "\x07", 1); 2677 em28xx_write_regs(dev, EM28XX_R06_I2C_CLK, "\x40", 1); 2678 em28xx_write_regs(dev, 0x0d, "\x42", 1); 2679 em28xx_write_regs(dev, 0x08, "\xfd", 1); 2680 msleep(10); 2681 em28xx_write_regs(dev, 0x08, "\xff", 1); 2682 msleep(10); 2683 em28xx_write_regs(dev, 0x08, "\x7f", 1); 2684 msleep(10); 2685 em28xx_write_regs(dev, 0x08, "\x6b", 1); 2686 2687 break; 2688 case EM2860_BOARD_EASYCAP: 2689 em28xx_write_regs(dev, 0x08, "\xf8", 1); 2690 break; 2691 2692 case EM2820_BOARD_IODATA_GVMVP_SZ: 2693 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xff); 2694 msleep(70); 2695 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf7); 2696 msleep(10); 2697 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfe); 2698 msleep(70); 2699 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2700 msleep(70); 2701 break; 2702 2703 case EM2860_BOARD_TERRATEC_GRABBY: 2704 /* HACK?: Ensure AC97 register reading is reliable before 2705 * proceeding. In practice, this will wait about 1.6 seconds. 2706 */ 2707 em28xx_wait_until_ac97_features_equals(dev, 0x6a90); 2708 break; 2709 } 2710 2711 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2712 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2713 2714 /* Unlock device */ 2715 em28xx_set_mode(dev, EM28XX_SUSPEND); 2716 } 2717 2718 static int em28xx_hint_board(struct em28xx *dev) 2719 { 2720 int i; 2721 2722 if (dev->board.is_webcam) { 2723 if (dev->em28xx_sensor == EM28XX_MT9V011) { 2724 dev->model = EM2820_BOARD_SILVERCREST_WEBCAM; 2725 } else if (dev->em28xx_sensor == EM28XX_MT9M001 || 2726 dev->em28xx_sensor == EM28XX_MT9M111) { 2727 dev->model = EM2750_BOARD_UNKNOWN; 2728 } 2729 /* FIXME: IMPROVE ! */ 2730 2731 return 0; 2732 } 2733 2734 /* HINT method: EEPROM 2735 * 2736 * This method works only for boards with eeprom. 2737 * Uses a hash of all eeprom bytes. The hash should be 2738 * unique for a vendor/tuner pair. 2739 * There are a high chance that tuners for different 2740 * video standards produce different hashes. 2741 */ 2742 for (i = 0; i < ARRAY_SIZE(em28xx_eeprom_hash); i++) { 2743 if (dev->hash == em28xx_eeprom_hash[i].hash) { 2744 dev->model = em28xx_eeprom_hash[i].model; 2745 dev->tuner_type = em28xx_eeprom_hash[i].tuner; 2746 2747 em28xx_errdev("Your board has no unique USB ID.\n"); 2748 em28xx_errdev("A hint were successfully done, " 2749 "based on eeprom hash.\n"); 2750 em28xx_errdev("This method is not 100%% failproof.\n"); 2751 em28xx_errdev("If the board were missdetected, " 2752 "please email this log to:\n"); 2753 em28xx_errdev("\tV4L Mailing List " 2754 " <linux-media@vger.kernel.org>\n"); 2755 em28xx_errdev("Board detected as %s\n", 2756 em28xx_boards[dev->model].name); 2757 2758 return 0; 2759 } 2760 } 2761 2762 /* HINT method: I2C attached devices 2763 * 2764 * This method works for all boards. 2765 * Uses a hash of i2c scanned devices. 2766 * Devices with the same i2c attached chips will 2767 * be considered equal. 2768 * This method is less precise than the eeprom one. 2769 */ 2770 2771 /* user did not request i2c scanning => do it now */ 2772 if (!dev->i2c_hash) 2773 em28xx_do_i2c_scan(dev, dev->def_i2c_bus); 2774 2775 for (i = 0; i < ARRAY_SIZE(em28xx_i2c_hash); i++) { 2776 if (dev->i2c_hash == em28xx_i2c_hash[i].hash) { 2777 dev->model = em28xx_i2c_hash[i].model; 2778 dev->tuner_type = em28xx_i2c_hash[i].tuner; 2779 em28xx_errdev("Your board has no unique USB ID.\n"); 2780 em28xx_errdev("A hint were successfully done, " 2781 "based on i2c devicelist hash.\n"); 2782 em28xx_errdev("This method is not 100%% failproof.\n"); 2783 em28xx_errdev("If the board were missdetected, " 2784 "please email this log to:\n"); 2785 em28xx_errdev("\tV4L Mailing List " 2786 " <linux-media@vger.kernel.org>\n"); 2787 em28xx_errdev("Board detected as %s\n", 2788 em28xx_boards[dev->model].name); 2789 2790 return 0; 2791 } 2792 } 2793 2794 em28xx_errdev("Your board has no unique USB ID and thus need a " 2795 "hint to be detected.\n"); 2796 em28xx_errdev("You may try to use card=<n> insmod option to " 2797 "workaround that.\n"); 2798 em28xx_errdev("Please send an email with this log to:\n"); 2799 em28xx_errdev("\tV4L Mailing List <linux-media@vger.kernel.org>\n"); 2800 em28xx_errdev("Board eeprom hash is 0x%08lx\n", dev->hash); 2801 em28xx_errdev("Board i2c devicelist hash is 0x%08lx\n", dev->i2c_hash); 2802 2803 em28xx_errdev("Here is a list of valid choices for the card=<n>" 2804 " insmod option:\n"); 2805 for (i = 0; i < em28xx_bcount; i++) { 2806 em28xx_errdev(" card=%d -> %s\n", 2807 i, em28xx_boards[i].name); 2808 } 2809 return -1; 2810 } 2811 2812 static void em28xx_card_setup(struct em28xx *dev) 2813 { 2814 /* 2815 * If the device can be a webcam, seek for a sensor. 2816 * If sensor is not found, then it isn't a webcam. 2817 */ 2818 if (dev->board.is_webcam) { 2819 if (em28xx_detect_sensor(dev) < 0) 2820 dev->board.is_webcam = 0; 2821 } 2822 2823 switch (dev->model) { 2824 case EM2750_BOARD_UNKNOWN: 2825 case EM2820_BOARD_UNKNOWN: 2826 case EM2800_BOARD_UNKNOWN: 2827 /* 2828 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 2829 * 2830 * This occurs because they share identical USB vendor and 2831 * product IDs. 2832 * 2833 * What we do here is look up the EEPROM hash of the K-WORLD 2834 * and if it is found then we decide that we do not have 2835 * a DIGIVOX and reset the device to the K-WORLD instead. 2836 * 2837 * This solution is only valid if they do not share eeprom 2838 * hash identities which has not been determined as yet. 2839 */ 2840 if (em28xx_hint_board(dev) < 0) 2841 em28xx_errdev("Board not discovered\n"); 2842 else { 2843 em28xx_set_model(dev); 2844 em28xx_pre_card_setup(dev); 2845 } 2846 break; 2847 default: 2848 em28xx_set_model(dev); 2849 } 2850 2851 em28xx_info("Identified as %s (card=%d)\n", 2852 dev->board.name, dev->model); 2853 2854 dev->tuner_type = em28xx_boards[dev->model].tuner_type; 2855 2856 /* request some modules */ 2857 switch (dev->model) { 2858 case EM2820_BOARD_HAUPPAUGE_WINTV_USB_2: 2859 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 2860 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 2861 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 2862 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 2863 case EM2884_BOARD_HAUPPAUGE_WINTV_HVR_930C: 2864 { 2865 struct tveeprom tv; 2866 2867 if (dev->eedata == NULL) 2868 break; 2869 #if defined(CONFIG_MODULES) && defined(MODULE) 2870 request_module("tveeprom"); 2871 #endif 2872 /* Call first TVeeprom */ 2873 2874 dev->i2c_client[dev->def_i2c_bus].addr = 0xa0 >> 1; 2875 tveeprom_hauppauge_analog(&dev->i2c_client[dev->def_i2c_bus], &tv, dev->eedata); 2876 2877 dev->tuner_type = tv.tuner_type; 2878 2879 if (tv.audio_processor == TVEEPROM_AUDPROC_MSP) { 2880 dev->i2s_speed = 2048000; 2881 dev->board.has_msp34xx = 1; 2882 } 2883 break; 2884 } 2885 case EM2882_BOARD_KWORLD_ATSC_315U: 2886 em28xx_write_reg(dev, 0x0d, 0x42); 2887 msleep(10); 2888 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xfd); 2889 msleep(10); 2890 break; 2891 case EM2820_BOARD_KWORLD_PVRTV2800RF: 2892 /* GPIO enables sound on KWORLD PVR TV 2800RF */ 2893 em28xx_write_reg(dev, EM2820_R08_GPIO_CTRL, 0xf9); 2894 break; 2895 case EM2820_BOARD_UNKNOWN: 2896 case EM2800_BOARD_UNKNOWN: 2897 /* 2898 * The K-WORLD DVB-T 310U is detected as an MSI Digivox AD. 2899 * 2900 * This occurs because they share identical USB vendor and 2901 * product IDs. 2902 * 2903 * What we do here is look up the EEPROM hash of the K-WORLD 2904 * and if it is found then we decide that we do not have 2905 * a DIGIVOX and reset the device to the K-WORLD instead. 2906 * 2907 * This solution is only valid if they do not share eeprom 2908 * hash identities which has not been determined as yet. 2909 */ 2910 case EM2880_BOARD_MSI_DIGIVOX_AD: 2911 if (!em28xx_hint_board(dev)) 2912 em28xx_set_model(dev); 2913 2914 /* In cases where we had to use a board hint, the call to 2915 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 2916 so make the call now so the analog GPIOs are set properly 2917 before probing the i2c bus. */ 2918 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2919 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2920 break; 2921 2922 /* 2923 * The Dikom DK300 is detected as an Kworld VS-DVB-T 323UR. 2924 * 2925 * This occurs because they share identical USB vendor and 2926 * product IDs. 2927 * 2928 * What we do here is look up the EEPROM hash of the Dikom 2929 * and if it is found then we decide that we do not have 2930 * a Kworld and reset the device to the Dikom instead. 2931 * 2932 * This solution is only valid if they do not share eeprom 2933 * hash identities which has not been determined as yet. 2934 */ 2935 case EM2882_BOARD_KWORLD_VS_DVBT: 2936 if (!em28xx_hint_board(dev)) 2937 em28xx_set_model(dev); 2938 2939 /* In cases where we had to use a board hint, the call to 2940 em28xx_set_mode() in em28xx_pre_card_setup() was a no-op, 2941 so make the call now so the analog GPIOs are set properly 2942 before probing the i2c bus. */ 2943 em28xx_gpio_set(dev, dev->board.tuner_gpio); 2944 em28xx_set_mode(dev, EM28XX_ANALOG_MODE); 2945 break; 2946 } 2947 2948 if (dev->board.valid == EM28XX_BOARD_NOT_VALIDATED) { 2949 em28xx_errdev("\n\n"); 2950 em28xx_errdev("The support for this board weren't " 2951 "valid yet.\n"); 2952 em28xx_errdev("Please send a report of having this working\n"); 2953 em28xx_errdev("not to V4L mailing list (and/or to other " 2954 "addresses)\n\n"); 2955 } 2956 2957 /* Free eeprom data memory */ 2958 kfree(dev->eedata); 2959 dev->eedata = NULL; 2960 2961 /* Allow override tuner type by a module parameter */ 2962 if (tuner >= 0) 2963 dev->tuner_type = tuner; 2964 } 2965 2966 void em28xx_setup_xc3028(struct em28xx *dev, struct xc2028_ctrl *ctl) 2967 { 2968 memset(ctl, 0, sizeof(*ctl)); 2969 2970 ctl->fname = XC2028_DEFAULT_FIRMWARE; 2971 ctl->max_len = 64; 2972 ctl->mts = em28xx_boards[dev->model].mts_firmware; 2973 2974 switch (dev->model) { 2975 case EM2880_BOARD_EMPIRE_DUAL_TV: 2976 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900: 2977 case EM2882_BOARD_TERRATEC_HYBRID_XS: 2978 ctl->demod = XC3028_FE_ZARLINK456; 2979 break; 2980 case EM2880_BOARD_TERRATEC_HYBRID_XS: 2981 case EM2880_BOARD_TERRATEC_HYBRID_XS_FR: 2982 case EM2881_BOARD_PINNACLE_HYBRID_PRO: 2983 ctl->demod = XC3028_FE_ZARLINK456; 2984 break; 2985 case EM2880_BOARD_HAUPPAUGE_WINTV_HVR_900_R2: 2986 case EM2882_BOARD_PINNACLE_HYBRID_PRO_330E: 2987 ctl->demod = XC3028_FE_DEFAULT; 2988 break; 2989 case EM2880_BOARD_AMD_ATI_TV_WONDER_HD_600: 2990 ctl->demod = XC3028_FE_DEFAULT; 2991 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 2992 break; 2993 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_850: 2994 case EM2883_BOARD_HAUPPAUGE_WINTV_HVR_950: 2995 case EM2880_BOARD_PINNACLE_PCTV_HD_PRO: 2996 /* FIXME: Better to specify the needed IF */ 2997 ctl->demod = XC3028_FE_DEFAULT; 2998 break; 2999 case EM2883_BOARD_KWORLD_HYBRID_330U: 3000 case EM2882_BOARD_DIKOM_DK300: 3001 case EM2882_BOARD_KWORLD_VS_DVBT: 3002 ctl->demod = XC3028_FE_CHINA; 3003 ctl->fname = XC2028_DEFAULT_FIRMWARE; 3004 break; 3005 case EM2882_BOARD_EVGA_INDTUBE: 3006 ctl->demod = XC3028_FE_CHINA; 3007 ctl->fname = XC3028L_DEFAULT_FIRMWARE; 3008 break; 3009 default: 3010 ctl->demod = XC3028_FE_OREN538; 3011 } 3012 } 3013 EXPORT_SYMBOL_GPL(em28xx_setup_xc3028); 3014 3015 static void request_module_async(struct work_struct *work) 3016 { 3017 struct em28xx *dev = container_of(work, 3018 struct em28xx, request_module_wk); 3019 3020 /* 3021 * The em28xx extensions can be modules or builtin. If the 3022 * modules are already loaded or are built in, those extensions 3023 * can be initialised right now. Otherwise, the module init 3024 * code will do it. 3025 */ 3026 3027 /* 3028 * Devicdes with an audio-only interface also have a V4L/DVB/RC 3029 * interface. Don't register extensions twice on those devices. 3030 */ 3031 if (dev->is_audio_only) { 3032 #if defined(CONFIG_MODULES) && defined(MODULE) 3033 request_module("em28xx-alsa"); 3034 #endif 3035 return; 3036 } 3037 3038 em28xx_init_extension(dev); 3039 3040 #if defined(CONFIG_MODULES) && defined(MODULE) 3041 if (dev->has_video) 3042 request_module("em28xx-v4l"); 3043 if (dev->usb_audio_type == EM28XX_USB_AUDIO_CLASS) 3044 request_module("snd-usb-audio"); 3045 else if (dev->usb_audio_type == EM28XX_USB_AUDIO_VENDOR) 3046 request_module("em28xx-alsa"); 3047 if (dev->board.has_dvb) 3048 request_module("em28xx-dvb"); 3049 if (dev->board.buttons || 3050 ((dev->board.ir_codes || dev->board.has_ir_i2c) && !disable_ir)) 3051 request_module("em28xx-rc"); 3052 #endif /* CONFIG_MODULES */ 3053 } 3054 3055 static void request_modules(struct em28xx *dev) 3056 { 3057 INIT_WORK(&dev->request_module_wk, request_module_async); 3058 schedule_work(&dev->request_module_wk); 3059 } 3060 3061 static void flush_request_modules(struct em28xx *dev) 3062 { 3063 flush_work(&dev->request_module_wk); 3064 } 3065 3066 static int em28xx_media_device_init(struct em28xx *dev, 3067 struct usb_device *udev) 3068 { 3069 #ifdef CONFIG_MEDIA_CONTROLLER 3070 struct media_device *mdev; 3071 3072 mdev = kzalloc(sizeof(*mdev), GFP_KERNEL); 3073 if (!mdev) 3074 return -ENOMEM; 3075 3076 if (udev->product) 3077 media_device_usb_init(mdev, udev, udev->product); 3078 else if (udev->manufacturer) 3079 media_device_usb_init(mdev, udev, udev->manufacturer); 3080 else 3081 media_device_usb_init(mdev, udev, dev->name); 3082 3083 dev->media_dev = mdev; 3084 #endif 3085 return 0; 3086 } 3087 3088 static void em28xx_unregister_media_device(struct em28xx *dev) 3089 { 3090 3091 #ifdef CONFIG_MEDIA_CONTROLLER 3092 if (dev->media_dev) { 3093 media_device_unregister(dev->media_dev); 3094 media_device_cleanup(dev->media_dev); 3095 kfree(dev->media_dev); 3096 dev->media_dev = NULL; 3097 } 3098 #endif 3099 } 3100 3101 /* 3102 * em28xx_release_resources() 3103 * unregisters the v4l2,i2c and usb devices 3104 * called when the device gets disconnected or at module unload 3105 */ 3106 static void em28xx_release_resources(struct em28xx *dev) 3107 { 3108 /*FIXME: I2C IR should be disconnected */ 3109 3110 mutex_lock(&dev->lock); 3111 3112 em28xx_unregister_media_device(dev); 3113 3114 if (dev->def_i2c_bus) 3115 em28xx_i2c_unregister(dev, 1); 3116 em28xx_i2c_unregister(dev, 0); 3117 3118 usb_put_dev(dev->udev); 3119 3120 /* Mark device as unused */ 3121 clear_bit(dev->devno, em28xx_devused); 3122 3123 mutex_unlock(&dev->lock); 3124 }; 3125 3126 /** 3127 * em28xx_free_device() - Free em28xx device 3128 * 3129 * @ref: struct kref for em28xx device 3130 * 3131 * This is called when all extensions and em28xx core unregisters a device 3132 */ 3133 void em28xx_free_device(struct kref *ref) 3134 { 3135 struct em28xx *dev = kref_to_dev(ref); 3136 3137 em28xx_info("Freeing device\n"); 3138 3139 if (!dev->disconnected) 3140 em28xx_release_resources(dev); 3141 3142 kfree(dev->alt_max_pkt_size_isoc); 3143 kfree(dev); 3144 } 3145 EXPORT_SYMBOL_GPL(em28xx_free_device); 3146 3147 /* 3148 * em28xx_init_dev() 3149 * allocates and inits the device structs, registers i2c bus and v4l device 3150 */ 3151 static int em28xx_init_dev(struct em28xx *dev, struct usb_device *udev, 3152 struct usb_interface *interface, 3153 int minor) 3154 { 3155 int retval; 3156 static const char *default_chip_name = "em28xx"; 3157 const char *chip_name = default_chip_name; 3158 3159 dev->udev = udev; 3160 mutex_init(&dev->ctrl_urb_lock); 3161 spin_lock_init(&dev->slock); 3162 3163 dev->em28xx_write_regs = em28xx_write_regs; 3164 dev->em28xx_read_reg = em28xx_read_reg; 3165 dev->em28xx_read_reg_req_len = em28xx_read_reg_req_len; 3166 dev->em28xx_write_regs_req = em28xx_write_regs_req; 3167 dev->em28xx_read_reg_req = em28xx_read_reg_req; 3168 dev->board.is_em2800 = em28xx_boards[dev->model].is_em2800; 3169 3170 em28xx_set_model(dev); 3171 3172 dev->wait_after_write = 5; 3173 3174 /* Based on the Chip ID, set the device configuration */ 3175 retval = em28xx_read_reg(dev, EM28XX_R0A_CHIPID); 3176 if (retval > 0) { 3177 dev->chip_id = retval; 3178 3179 switch (dev->chip_id) { 3180 case CHIP_ID_EM2800: 3181 chip_name = "em2800"; 3182 break; 3183 case CHIP_ID_EM2710: 3184 chip_name = "em2710"; 3185 break; 3186 case CHIP_ID_EM2750: 3187 chip_name = "em2750"; 3188 break; 3189 case CHIP_ID_EM2765: 3190 chip_name = "em2765"; 3191 dev->wait_after_write = 0; 3192 dev->is_em25xx = 1; 3193 dev->eeprom_addrwidth_16bit = 1; 3194 break; 3195 case CHIP_ID_EM2820: 3196 chip_name = "em2710/2820"; 3197 if (le16_to_cpu(dev->udev->descriptor.idVendor) 3198 == 0xeb1a) { 3199 __le16 idProd = dev->udev->descriptor.idProduct; 3200 3201 if (le16_to_cpu(idProd) == 0x2710) 3202 chip_name = "em2710"; 3203 else if (le16_to_cpu(idProd) == 0x2820) 3204 chip_name = "em2820"; 3205 } 3206 /* NOTE: the em2820 is used in webcams, too ! */ 3207 break; 3208 case CHIP_ID_EM2840: 3209 chip_name = "em2840"; 3210 break; 3211 case CHIP_ID_EM2860: 3212 chip_name = "em2860"; 3213 break; 3214 case CHIP_ID_EM2870: 3215 chip_name = "em2870"; 3216 dev->wait_after_write = 0; 3217 break; 3218 case CHIP_ID_EM2874: 3219 chip_name = "em2874"; 3220 dev->wait_after_write = 0; 3221 dev->eeprom_addrwidth_16bit = 1; 3222 break; 3223 case CHIP_ID_EM28174: 3224 chip_name = "em28174"; 3225 dev->wait_after_write = 0; 3226 dev->eeprom_addrwidth_16bit = 1; 3227 break; 3228 case CHIP_ID_EM28178: 3229 chip_name = "em28178"; 3230 dev->wait_after_write = 0; 3231 dev->eeprom_addrwidth_16bit = 1; 3232 break; 3233 case CHIP_ID_EM2883: 3234 chip_name = "em2882/3"; 3235 dev->wait_after_write = 0; 3236 break; 3237 case CHIP_ID_EM2884: 3238 chip_name = "em2884"; 3239 dev->wait_after_write = 0; 3240 dev->eeprom_addrwidth_16bit = 1; 3241 break; 3242 default: 3243 printk(KERN_INFO DRIVER_NAME 3244 ": unknown em28xx chip ID (%d)\n", dev->chip_id); 3245 } 3246 } 3247 3248 if (chip_name != default_chip_name) 3249 printk(KERN_INFO DRIVER_NAME 3250 ": chip ID is %s\n", chip_name); 3251 3252 /* 3253 * For em2820/em2710, the name may change latter, after checking 3254 * if the device has a sensor (so, it is em2710) or not. 3255 */ 3256 snprintf(dev->name, sizeof(dev->name), "%s #%d", chip_name, dev->devno); 3257 3258 em28xx_media_device_init(dev, udev); 3259 3260 if (dev->is_audio_only) { 3261 retval = em28xx_audio_setup(dev); 3262 if (retval) 3263 return -ENODEV; 3264 em28xx_init_extension(dev); 3265 3266 return 0; 3267 } 3268 3269 em28xx_pre_card_setup(dev); 3270 3271 if (!dev->board.is_em2800) { 3272 /* Resets I2C speed */ 3273 retval = em28xx_write_reg(dev, EM28XX_R06_I2C_CLK, dev->board.i2c_speed); 3274 if (retval < 0) { 3275 em28xx_errdev("%s: em28xx_write_reg failed!" 3276 " retval [%d]\n", 3277 __func__, retval); 3278 return retval; 3279 } 3280 } 3281 3282 rt_mutex_init(&dev->i2c_bus_lock); 3283 3284 /* register i2c bus 0 */ 3285 if (dev->board.is_em2800) 3286 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM2800); 3287 else 3288 retval = em28xx_i2c_register(dev, 0, EM28XX_I2C_ALGO_EM28XX); 3289 if (retval < 0) { 3290 em28xx_errdev("%s: em28xx_i2c_register bus 0 - error [%d]!\n", 3291 __func__, retval); 3292 return retval; 3293 } 3294 3295 /* register i2c bus 1 */ 3296 if (dev->def_i2c_bus) { 3297 if (dev->is_em25xx) 3298 retval = em28xx_i2c_register(dev, 1, 3299 EM28XX_I2C_ALGO_EM25XX_BUS_B); 3300 else 3301 retval = em28xx_i2c_register(dev, 1, 3302 EM28XX_I2C_ALGO_EM28XX); 3303 if (retval < 0) { 3304 em28xx_errdev("%s: em28xx_i2c_register bus 1 - error [%d]!\n", 3305 __func__, retval); 3306 3307 em28xx_i2c_unregister(dev, 0); 3308 3309 return retval; 3310 } 3311 } 3312 3313 /* Do board specific init and eeprom reading */ 3314 em28xx_card_setup(dev); 3315 3316 return 0; 3317 } 3318 3319 /* high bandwidth multiplier, as encoded in highspeed endpoint descriptors */ 3320 #define hb_mult(wMaxPacketSize) (1 + (((wMaxPacketSize) >> 11) & 0x03)) 3321 3322 /* 3323 * em28xx_usb_probe() 3324 * checks for supported devices 3325 */ 3326 static int em28xx_usb_probe(struct usb_interface *interface, 3327 const struct usb_device_id *id) 3328 { 3329 struct usb_device *udev; 3330 struct em28xx *dev = NULL; 3331 int retval; 3332 bool has_vendor_audio = false, has_video = false, has_dvb = false; 3333 int i, nr, try_bulk; 3334 const int ifnum = interface->altsetting[0].desc.bInterfaceNumber; 3335 char *speed; 3336 3337 udev = usb_get_dev(interface_to_usbdev(interface)); 3338 3339 /* Check to see next free device and mark as used */ 3340 do { 3341 nr = find_first_zero_bit(em28xx_devused, EM28XX_MAXBOARDS); 3342 if (nr >= EM28XX_MAXBOARDS) { 3343 /* No free device slots */ 3344 printk(DRIVER_NAME ": Supports only %i em28xx boards.\n", 3345 EM28XX_MAXBOARDS); 3346 retval = -ENOMEM; 3347 goto err_no_slot; 3348 } 3349 } while (test_and_set_bit(nr, em28xx_devused)); 3350 3351 /* Don't register audio interfaces */ 3352 if (interface->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3353 em28xx_err(DRIVER_NAME " audio device (%04x:%04x): " 3354 "interface %i, class %i\n", 3355 le16_to_cpu(udev->descriptor.idVendor), 3356 le16_to_cpu(udev->descriptor.idProduct), 3357 ifnum, 3358 interface->altsetting[0].desc.bInterfaceClass); 3359 3360 retval = -ENODEV; 3361 goto err; 3362 } 3363 3364 /* allocate memory for our device state and initialize it */ 3365 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 3366 if (dev == NULL) { 3367 em28xx_err(DRIVER_NAME ": out of memory!\n"); 3368 retval = -ENOMEM; 3369 goto err; 3370 } 3371 3372 /* compute alternate max packet sizes */ 3373 dev->alt_max_pkt_size_isoc = 3374 kmalloc(sizeof(dev->alt_max_pkt_size_isoc[0]) * 3375 interface->num_altsetting, GFP_KERNEL); 3376 if (dev->alt_max_pkt_size_isoc == NULL) { 3377 em28xx_errdev("out of memory!\n"); 3378 kfree(dev); 3379 retval = -ENOMEM; 3380 goto err; 3381 } 3382 3383 /* Get endpoints */ 3384 for (i = 0; i < interface->num_altsetting; i++) { 3385 int ep; 3386 3387 for (ep = 0; ep < interface->altsetting[i].desc.bNumEndpoints; ep++) { 3388 const struct usb_endpoint_descriptor *e; 3389 int sizedescr, size; 3390 3391 e = &interface->altsetting[i].endpoint[ep].desc; 3392 3393 sizedescr = le16_to_cpu(e->wMaxPacketSize); 3394 size = sizedescr & 0x7ff; 3395 3396 if (udev->speed == USB_SPEED_HIGH) 3397 size = size * hb_mult(sizedescr); 3398 3399 if (usb_endpoint_dir_in(e)) { 3400 switch (e->bEndpointAddress) { 3401 case 0x82: 3402 has_video = true; 3403 if (usb_endpoint_xfer_isoc(e)) { 3404 dev->analog_ep_isoc = 3405 e->bEndpointAddress; 3406 dev->alt_max_pkt_size_isoc[i] = size; 3407 } else if (usb_endpoint_xfer_bulk(e)) { 3408 dev->analog_ep_bulk = 3409 e->bEndpointAddress; 3410 } 3411 break; 3412 case 0x83: 3413 if (usb_endpoint_xfer_isoc(e)) { 3414 has_vendor_audio = true; 3415 } else { 3416 printk(KERN_INFO DRIVER_NAME 3417 ": error: skipping audio endpoint 0x83, because it uses bulk transfers !\n"); 3418 } 3419 break; 3420 case 0x84: 3421 if (has_video && 3422 (usb_endpoint_xfer_bulk(e))) { 3423 dev->analog_ep_bulk = 3424 e->bEndpointAddress; 3425 } else { 3426 if (usb_endpoint_xfer_isoc(e)) { 3427 if (size > dev->dvb_max_pkt_size_isoc) { 3428 has_dvb = true; /* see NOTE (~) */ 3429 dev->dvb_ep_isoc = e->bEndpointAddress; 3430 dev->dvb_max_pkt_size_isoc = size; 3431 dev->dvb_alt_isoc = i; 3432 } 3433 } else { 3434 has_dvb = true; 3435 dev->dvb_ep_bulk = e->bEndpointAddress; 3436 } 3437 } 3438 break; 3439 } 3440 } 3441 /* NOTE: 3442 * Old logic with support for isoc transfers only was: 3443 * 0x82 isoc => analog 3444 * 0x83 isoc => audio 3445 * 0x84 isoc => digital 3446 * 3447 * New logic with support for bulk transfers 3448 * 0x82 isoc => analog 3449 * 0x82 bulk => analog 3450 * 0x83 isoc* => audio 3451 * 0x84 isoc => digital 3452 * 0x84 bulk => analog or digital** 3453 * (*: audio should always be isoc) 3454 * (**: analog, if ep 0x82 is isoc, otherwise digital) 3455 * 3456 * The new logic preserves backwards compatibility and 3457 * reflects the endpoint configurations we have seen 3458 * so far. But there might be devices for which this 3459 * logic is not sufficient... 3460 */ 3461 /* 3462 * NOTE (~): some manufacturers (e.g. Terratec) disable 3463 * endpoints by setting wMaxPacketSize to 0 bytes for 3464 * all alt settings. So far, we've seen this for 3465 * DVB isoc endpoints only. 3466 */ 3467 } 3468 } 3469 3470 if (!(has_vendor_audio || has_video || has_dvb)) { 3471 retval = -ENODEV; 3472 goto err_free; 3473 } 3474 3475 switch (udev->speed) { 3476 case USB_SPEED_LOW: 3477 speed = "1.5"; 3478 break; 3479 case USB_SPEED_UNKNOWN: 3480 case USB_SPEED_FULL: 3481 speed = "12"; 3482 break; 3483 case USB_SPEED_HIGH: 3484 speed = "480"; 3485 break; 3486 default: 3487 speed = "unknown"; 3488 } 3489 3490 printk(KERN_INFO DRIVER_NAME 3491 ": New device %s %s @ %s Mbps " 3492 "(%04x:%04x, interface %d, class %d)\n", 3493 udev->manufacturer ? udev->manufacturer : "", 3494 udev->product ? udev->product : "", 3495 speed, 3496 le16_to_cpu(udev->descriptor.idVendor), 3497 le16_to_cpu(udev->descriptor.idProduct), 3498 ifnum, 3499 interface->altsetting->desc.bInterfaceNumber); 3500 3501 /* 3502 * Make sure we have 480 Mbps of bandwidth, otherwise things like 3503 * video stream wouldn't likely work, since 12 Mbps is generally 3504 * not enough even for most Digital TV streams. 3505 */ 3506 if (udev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { 3507 printk(DRIVER_NAME ": Device initialization failed.\n"); 3508 printk(DRIVER_NAME ": Device must be connected to a high-speed" 3509 " USB 2.0 port.\n"); 3510 retval = -ENODEV; 3511 goto err_free; 3512 } 3513 3514 dev->devno = nr; 3515 dev->model = id->driver_info; 3516 dev->alt = -1; 3517 dev->is_audio_only = has_vendor_audio && !(has_video || has_dvb); 3518 dev->has_video = has_video; 3519 dev->ifnum = ifnum; 3520 3521 if (has_vendor_audio) { 3522 printk(KERN_INFO DRIVER_NAME ": Audio interface %i found %s\n", 3523 ifnum, "(Vendor Class)"); 3524 dev->usb_audio_type = EM28XX_USB_AUDIO_VENDOR; 3525 } 3526 /* Checks if audio is provided by a USB Audio Class interface */ 3527 for (i = 0; i < udev->config->desc.bNumInterfaces; i++) { 3528 struct usb_interface *uif = udev->config->interface[i]; 3529 3530 if (uif->altsetting[0].desc.bInterfaceClass == USB_CLASS_AUDIO) { 3531 if (has_vendor_audio) 3532 em28xx_err("em28xx: device seems to have vendor AND usb audio class interfaces !\n" 3533 "\t\tThe vendor interface will be ignored. Please contact the developers <linux-media@vger.kernel.org>\n"); 3534 dev->usb_audio_type = EM28XX_USB_AUDIO_CLASS; 3535 break; 3536 } 3537 } 3538 3539 if (has_video) 3540 printk(KERN_INFO DRIVER_NAME 3541 ": Video interface %i found:%s%s\n", 3542 ifnum, 3543 dev->analog_ep_bulk ? " bulk" : "", 3544 dev->analog_ep_isoc ? " isoc" : ""); 3545 if (has_dvb) 3546 printk(KERN_INFO DRIVER_NAME 3547 ": DVB interface %i found:%s%s\n", 3548 ifnum, 3549 dev->dvb_ep_bulk ? " bulk" : "", 3550 dev->dvb_ep_isoc ? " isoc" : ""); 3551 3552 dev->num_alt = interface->num_altsetting; 3553 3554 if ((unsigned)card[nr] < em28xx_bcount) 3555 dev->model = card[nr]; 3556 3557 /* save our data pointer in this interface device */ 3558 usb_set_intfdata(interface, dev); 3559 3560 /* allocate device struct and check if the device is a webcam */ 3561 mutex_init(&dev->lock); 3562 retval = em28xx_init_dev(dev, udev, interface, nr); 3563 if (retval) { 3564 goto err_free; 3565 } 3566 3567 if (usb_xfer_mode < 0) { 3568 if (dev->board.is_webcam) 3569 try_bulk = 1; 3570 else 3571 try_bulk = 0; 3572 } else { 3573 try_bulk = usb_xfer_mode > 0; 3574 } 3575 3576 /* Disable V4L2 if the device doesn't have a decoder */ 3577 if (has_video && 3578 dev->board.decoder == EM28XX_NODECODER && !dev->board.is_webcam) { 3579 printk(DRIVER_NAME 3580 ": Currently, V4L2 is not supported on this model\n"); 3581 has_video = false; 3582 dev->has_video = false; 3583 } 3584 3585 /* Select USB transfer types to use */ 3586 if (has_video) { 3587 if (!dev->analog_ep_isoc || (try_bulk && dev->analog_ep_bulk)) 3588 dev->analog_xfer_bulk = 1; 3589 em28xx_info("analog set to %s mode.\n", 3590 dev->analog_xfer_bulk ? "bulk" : "isoc"); 3591 } 3592 if (has_dvb) { 3593 if (!dev->dvb_ep_isoc || (try_bulk && dev->dvb_ep_bulk)) 3594 dev->dvb_xfer_bulk = 1; 3595 em28xx_info("dvb set to %s mode.\n", 3596 dev->dvb_xfer_bulk ? "bulk" : "isoc"); 3597 } 3598 3599 kref_init(&dev->ref); 3600 3601 request_modules(dev); 3602 3603 /* 3604 * Do it at the end, to reduce dynamic configuration changes during 3605 * the device init. Yet, as request_modules() can be async, the 3606 * topology will likely change after the load of the em28xx subdrivers. 3607 */ 3608 #ifdef CONFIG_MEDIA_CONTROLLER 3609 retval = media_device_register(dev->media_dev); 3610 #endif 3611 3612 return 0; 3613 3614 err_free: 3615 kfree(dev->alt_max_pkt_size_isoc); 3616 kfree(dev); 3617 3618 err: 3619 clear_bit(nr, em28xx_devused); 3620 3621 err_no_slot: 3622 usb_put_dev(udev); 3623 return retval; 3624 } 3625 3626 /* 3627 * em28xx_usb_disconnect() 3628 * called when the device gets disconnected 3629 * video device will be unregistered on v4l2_close in case it is still open 3630 */ 3631 static void em28xx_usb_disconnect(struct usb_interface *interface) 3632 { 3633 struct em28xx *dev; 3634 3635 dev = usb_get_intfdata(interface); 3636 usb_set_intfdata(interface, NULL); 3637 3638 if (!dev) 3639 return; 3640 3641 dev->disconnected = 1; 3642 3643 em28xx_info("Disconnecting %s\n", dev->name); 3644 3645 flush_request_modules(dev); 3646 3647 em28xx_close_extension(dev); 3648 3649 em28xx_release_resources(dev); 3650 kref_put(&dev->ref, em28xx_free_device); 3651 } 3652 3653 static int em28xx_usb_suspend(struct usb_interface *interface, 3654 pm_message_t message) 3655 { 3656 struct em28xx *dev; 3657 3658 dev = usb_get_intfdata(interface); 3659 if (!dev) 3660 return 0; 3661 em28xx_suspend_extension(dev); 3662 return 0; 3663 } 3664 3665 static int em28xx_usb_resume(struct usb_interface *interface) 3666 { 3667 struct em28xx *dev; 3668 3669 dev = usb_get_intfdata(interface); 3670 if (!dev) 3671 return 0; 3672 em28xx_resume_extension(dev); 3673 return 0; 3674 } 3675 3676 static struct usb_driver em28xx_usb_driver = { 3677 .name = "em28xx", 3678 .probe = em28xx_usb_probe, 3679 .disconnect = em28xx_usb_disconnect, 3680 .suspend = em28xx_usb_suspend, 3681 .resume = em28xx_usb_resume, 3682 .reset_resume = em28xx_usb_resume, 3683 .id_table = em28xx_id_table, 3684 }; 3685 3686 module_usb_driver(em28xx_usb_driver); 3687