1 /* 2 * mxl111sf-phy.c - driver for the MaxLinear MXL111SF 3 * 4 * Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * GNU General Public License for more details. 15 * 16 * You should have received a copy of the GNU General Public License 17 * along with this program; if not, write to the Free Software 18 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 19 */ 20 21 #include "mxl111sf-phy.h" 22 #include "mxl111sf-reg.h" 23 24 int mxl111sf_init_tuner_demod(struct mxl111sf_state *state) 25 { 26 struct mxl111sf_reg_ctrl_info mxl_111_overwrite_default[] = { 27 {0x07, 0xff, 0x0c}, 28 {0x58, 0xff, 0x9d}, 29 {0x09, 0xff, 0x00}, 30 {0x06, 0xff, 0x06}, 31 {0xc8, 0xff, 0x40}, /* ED_LE_WIN_OLD = 0 */ 32 {0x8d, 0x01, 0x01}, /* NEGATE_Q */ 33 {0x32, 0xff, 0xac}, /* DIG_RFREFSELECT = 12 */ 34 {0x42, 0xff, 0x43}, /* DIG_REG_AMP = 4 */ 35 {0x74, 0xff, 0xc4}, /* SSPUR_FS_PRIO = 4 */ 36 {0x71, 0xff, 0xe6}, /* SPUR_ROT_PRIO_VAL = 1 */ 37 {0x83, 0xff, 0x64}, /* INF_FILT1_THD_SC = 100 */ 38 {0x85, 0xff, 0x64}, /* INF_FILT2_THD_SC = 100 */ 39 {0x88, 0xff, 0xf0}, /* INF_THD = 240 */ 40 {0x6f, 0xf0, 0xb0}, /* DFE_DLY = 11 */ 41 {0x00, 0xff, 0x01}, /* Change to page 1 */ 42 {0x81, 0xff, 0x11}, /* DSM_FERR_BYPASS = 1 */ 43 {0xf4, 0xff, 0x07}, /* DIG_FREQ_CORR = 1 */ 44 {0xd4, 0x1f, 0x0f}, /* SPUR_TEST_NOISE_TH = 15 */ 45 {0xd6, 0xff, 0x0c}, /* SPUR_TEST_NOISE_PAPR = 12 */ 46 {0x00, 0xff, 0x00}, /* Change to page 0 */ 47 {0, 0, 0} 48 }; 49 50 mxl_debug("()"); 51 52 return mxl111sf_ctrl_program_regs(state, mxl_111_overwrite_default); 53 } 54 55 int mxl1x1sf_soft_reset(struct mxl111sf_state *state) 56 { 57 int ret; 58 mxl_debug("()"); 59 60 ret = mxl111sf_write_reg(state, 0xff, 0x00); /* AIC */ 61 if (mxl_fail(ret)) 62 goto fail; 63 ret = mxl111sf_write_reg(state, 0x02, 0x01); /* get out of reset */ 64 mxl_fail(ret); 65 fail: 66 return ret; 67 } 68 69 int mxl1x1sf_set_device_mode(struct mxl111sf_state *state, int mode) 70 { 71 int ret; 72 73 mxl_debug("(%s)", MXL_SOC_MODE == mode ? 74 "MXL_SOC_MODE" : "MXL_TUNER_MODE"); 75 76 /* set device mode */ 77 ret = mxl111sf_write_reg(state, 0x03, 78 MXL_SOC_MODE == mode ? 0x01 : 0x00); 79 if (mxl_fail(ret)) 80 goto fail; 81 82 ret = mxl111sf_write_reg_mask(state, 83 0x7d, 0x40, MXL_SOC_MODE == mode ? 84 0x00 : /* enable impulse noise filter, 85 INF_BYP = 0 */ 86 0x40); /* disable impulse noise filter, 87 INF_BYP = 1 */ 88 if (mxl_fail(ret)) 89 goto fail; 90 91 state->device_mode = mode; 92 fail: 93 return ret; 94 } 95 96 /* power up tuner */ 97 int mxl1x1sf_top_master_ctrl(struct mxl111sf_state *state, int onoff) 98 { 99 mxl_debug("(%d)", onoff); 100 101 return mxl111sf_write_reg(state, 0x01, onoff ? 0x01 : 0x00); 102 } 103 104 int mxl111sf_disable_656_port(struct mxl111sf_state *state) 105 { 106 mxl_debug("()"); 107 108 return mxl111sf_write_reg_mask(state, 0x12, 0x04, 0x00); 109 } 110 111 int mxl111sf_enable_usb_output(struct mxl111sf_state *state) 112 { 113 mxl_debug("()"); 114 115 return mxl111sf_write_reg_mask(state, 0x17, 0x40, 0x00); 116 } 117 118 /* initialize TSIF as input port of MxL1X1SF for MPEG2 data transfer */ 119 int mxl111sf_config_mpeg_in(struct mxl111sf_state *state, 120 unsigned int parallel_serial, 121 unsigned int msb_lsb_1st, 122 unsigned int clock_phase, 123 unsigned int mpeg_valid_pol, 124 unsigned int mpeg_sync_pol) 125 { 126 int ret; 127 u8 mode, tmp; 128 129 mxl_debug("(%u,%u,%u,%u,%u)", parallel_serial, msb_lsb_1st, 130 clock_phase, mpeg_valid_pol, mpeg_sync_pol); 131 132 /* Enable PIN MUX */ 133 ret = mxl111sf_write_reg(state, V6_PIN_MUX_MODE_REG, V6_ENABLE_PIN_MUX); 134 mxl_fail(ret); 135 136 /* Configure MPEG Clock phase */ 137 mxl111sf_read_reg(state, V6_MPEG_IN_CLK_INV_REG, &mode); 138 139 if (clock_phase == TSIF_NORMAL) 140 mode &= ~V6_INVERTED_CLK_PHASE; 141 else 142 mode |= V6_INVERTED_CLK_PHASE; 143 144 ret = mxl111sf_write_reg(state, V6_MPEG_IN_CLK_INV_REG, mode); 145 mxl_fail(ret); 146 147 /* Configure data input mode, MPEG Valid polarity, MPEG Sync polarity 148 * Get current configuration */ 149 ret = mxl111sf_read_reg(state, V6_MPEG_IN_CTRL_REG, &mode); 150 mxl_fail(ret); 151 152 /* Data Input mode */ 153 if (parallel_serial == TSIF_INPUT_PARALLEL) { 154 /* Disable serial mode */ 155 mode &= ~V6_MPEG_IN_DATA_SERIAL; 156 157 /* Enable Parallel mode */ 158 mode |= V6_MPEG_IN_DATA_PARALLEL; 159 } else { 160 /* Disable Parallel mode */ 161 mode &= ~V6_MPEG_IN_DATA_PARALLEL; 162 163 /* Enable Serial Mode */ 164 mode |= V6_MPEG_IN_DATA_SERIAL; 165 166 /* If serial interface is chosen, configure 167 MSB or LSB order in transmission */ 168 ret = mxl111sf_read_reg(state, 169 V6_MPEG_INOUT_BIT_ORDER_CTRL_REG, 170 &tmp); 171 mxl_fail(ret); 172 173 if (msb_lsb_1st == MPEG_SER_MSB_FIRST_ENABLED) 174 tmp |= V6_MPEG_SER_MSB_FIRST; 175 else 176 tmp &= ~V6_MPEG_SER_MSB_FIRST; 177 178 ret = mxl111sf_write_reg(state, 179 V6_MPEG_INOUT_BIT_ORDER_CTRL_REG, 180 tmp); 181 mxl_fail(ret); 182 } 183 184 /* MPEG Sync polarity */ 185 if (mpeg_sync_pol == TSIF_NORMAL) 186 mode &= ~V6_INVERTED_MPEG_SYNC; 187 else 188 mode |= V6_INVERTED_MPEG_SYNC; 189 190 /* MPEG Valid polarity */ 191 if (mpeg_valid_pol == 0) 192 mode &= ~V6_INVERTED_MPEG_VALID; 193 else 194 mode |= V6_INVERTED_MPEG_VALID; 195 196 ret = mxl111sf_write_reg(state, V6_MPEG_IN_CTRL_REG, mode); 197 mxl_fail(ret); 198 199 return ret; 200 } 201 202 int mxl111sf_init_i2s_port(struct mxl111sf_state *state, u8 sample_size) 203 { 204 static struct mxl111sf_reg_ctrl_info init_i2s[] = { 205 {0x1b, 0xff, 0x1e}, /* pin mux mode, Choose 656/I2S input */ 206 {0x15, 0x60, 0x60}, /* Enable I2S */ 207 {0x17, 0xe0, 0x20}, /* Input, MPEG MODE USB, 208 Inverted 656 Clock, I2S_SOFT_RESET, 209 0 : Normal operation, 1 : Reset State */ 210 #if 0 211 {0x12, 0x01, 0x00}, /* AUDIO_IRQ_CLR (Overflow Indicator) */ 212 #endif 213 {0x00, 0xff, 0x02}, /* Change to Control Page */ 214 {0x26, 0x0d, 0x0d}, /* I2S_MODE & BT656_SRC_SEL for FPGA only */ 215 {0x00, 0xff, 0x00}, 216 {0, 0, 0} 217 }; 218 int ret; 219 220 mxl_debug("(0x%02x)", sample_size); 221 222 ret = mxl111sf_ctrl_program_regs(state, init_i2s); 223 if (mxl_fail(ret)) 224 goto fail; 225 226 ret = mxl111sf_write_reg(state, V6_I2S_NUM_SAMPLES_REG, sample_size); 227 mxl_fail(ret); 228 fail: 229 return ret; 230 } 231 232 int mxl111sf_disable_i2s_port(struct mxl111sf_state *state) 233 { 234 static struct mxl111sf_reg_ctrl_info disable_i2s[] = { 235 {0x15, 0x40, 0x00}, 236 {0, 0, 0} 237 }; 238 239 mxl_debug("()"); 240 241 return mxl111sf_ctrl_program_regs(state, disable_i2s); 242 } 243 244 int mxl111sf_config_i2s(struct mxl111sf_state *state, 245 u8 msb_start_pos, u8 data_width) 246 { 247 int ret; 248 u8 tmp; 249 250 mxl_debug("(0x%02x, 0x%02x)", msb_start_pos, data_width); 251 252 ret = mxl111sf_read_reg(state, V6_I2S_STREAM_START_BIT_REG, &tmp); 253 if (mxl_fail(ret)) 254 goto fail; 255 256 tmp &= 0xe0; 257 tmp |= msb_start_pos; 258 ret = mxl111sf_write_reg(state, V6_I2S_STREAM_START_BIT_REG, tmp); 259 if (mxl_fail(ret)) 260 goto fail; 261 262 ret = mxl111sf_read_reg(state, V6_I2S_STREAM_END_BIT_REG, &tmp); 263 if (mxl_fail(ret)) 264 goto fail; 265 266 tmp &= 0xe0; 267 tmp |= data_width; 268 ret = mxl111sf_write_reg(state, V6_I2S_STREAM_END_BIT_REG, tmp); 269 mxl_fail(ret); 270 fail: 271 return ret; 272 } 273 274 int mxl111sf_config_spi(struct mxl111sf_state *state, int onoff) 275 { 276 u8 val; 277 int ret; 278 279 mxl_debug("(%d)", onoff); 280 281 ret = mxl111sf_write_reg(state, 0x00, 0x02); 282 if (mxl_fail(ret)) 283 goto fail; 284 285 ret = mxl111sf_read_reg(state, V8_SPI_MODE_REG, &val); 286 if (mxl_fail(ret)) 287 goto fail; 288 289 if (onoff) 290 val |= 0x04; 291 else 292 val &= ~0x04; 293 294 ret = mxl111sf_write_reg(state, V8_SPI_MODE_REG, val); 295 if (mxl_fail(ret)) 296 goto fail; 297 298 ret = mxl111sf_write_reg(state, 0x00, 0x00); 299 mxl_fail(ret); 300 fail: 301 return ret; 302 } 303 304 int mxl111sf_idac_config(struct mxl111sf_state *state, 305 u8 control_mode, u8 current_setting, 306 u8 current_value, u8 hysteresis_value) 307 { 308 int ret; 309 u8 val; 310 /* current value will be set for both automatic & manual IDAC control */ 311 val = current_value; 312 313 if (control_mode == IDAC_MANUAL_CONTROL) { 314 /* enable manual control of IDAC */ 315 val |= IDAC_MANUAL_CONTROL_BIT_MASK; 316 317 if (current_setting == IDAC_CURRENT_SINKING_ENABLE) 318 /* enable current sinking in manual mode */ 319 val |= IDAC_CURRENT_SINKING_BIT_MASK; 320 else 321 /* disable current sinking in manual mode */ 322 val &= ~IDAC_CURRENT_SINKING_BIT_MASK; 323 } else { 324 /* disable manual control of IDAC */ 325 val &= ~IDAC_MANUAL_CONTROL_BIT_MASK; 326 327 /* set hysteresis value reg: 0x0B<5:0> */ 328 ret = mxl111sf_write_reg(state, V6_IDAC_HYSTERESIS_REG, 329 (hysteresis_value & 0x3F)); 330 mxl_fail(ret); 331 } 332 333 ret = mxl111sf_write_reg(state, V6_IDAC_SETTINGS_REG, val); 334 mxl_fail(ret); 335 336 return ret; 337 } 338 339 /* 340 * Local variables: 341 * c-basic-offset: 8 342 * End: 343 */ 344