xref: /openbmc/linux/drivers/media/usb/dvb-usb-v2/mxl111sf-gpio.h (revision 08e10972)

/*
 *  mxl111sf-gpio.h - driver for the MaxLinear MXL111SF
 *
 *  Copyright (C) 2010-2014 Michael Krufky <mkrufky@linuxtv.org>
 *
 *  This program is free software; you can redistribute it and/or modify
 *  it under the terms of the GNU General Public License as published by
 *  the Free Software Foundation; either version 2 of the License, or
 *  (at your option) any later version.
 *
 *  This program is distributed in the hope that it will be useful,
 *  but WITHOUT ANY WARRANTY; without even the implied warranty of
 *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 *  GNU General Public License for more details.
 *
 *  You should have received a copy of the GNU General Public License
 *  along with this program; if not, write to the Free Software
 *  Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
 */

#ifndef _DVB_USB_MXL111SF_GPIO_H_
#define _DVB_USB_MXL111SF_GPIO_H_

#include "mxl111sf.h"

int mxl111sf_set_gpio(struct mxl111sf_state *state, int gpio, int val);
int mxl111sf_init_port_expander(struct mxl111sf_state *state);

#define MXL111SF_GPIO_MOD_DVBT	0
#define MXL111SF_GPIO_MOD_MH	1
#define MXL111SF_GPIO_MOD_ATSC	2
int mxl111sf_gpio_mode_switch(struct mxl111sf_state *state, unsigned int mode);

enum mxl111sf_mux_config {
	PIN_MUX_DEFAULT = 0,
	PIN_MUX_TS_OUT_PARALLEL,
	PIN_MUX_TS_OUT_SERIAL,
	PIN_MUX_GPIO_MODE,
	PIN_MUX_TS_SERIAL_IN_MODE_0,
	PIN_MUX_TS_SERIAL_IN_MODE_1,
	PIN_MUX_TS_SPI_IN_MODE_0,
	PIN_MUX_TS_SPI_IN_MODE_1,
	PIN_MUX_TS_PARALLEL_IN,
	PIN_MUX_BT656_I2S_MODE,
};

int mxl111sf_config_pin_mux_modes(struct mxl111sf_state *state,
				  enum mxl111sf_mux_config pin_mux_config);

#endif /* _DVB_USB_MXL111SF_GPIO_H_ */

/*
 * Local variables:
 * c-basic-offset: 8
 * End:
 */