1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * E3C EC168 DVB USB driver 4 * 5 * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> 6 */ 7 8 #include "ec168.h" 9 #include "ec100.h" 10 #include "mxl5005s.h" 11 12 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); 13 14 static int ec168_ctrl_msg(struct dvb_usb_device *d, struct ec168_req *req) 15 { 16 int ret; 17 unsigned int pipe; 18 u8 request, requesttype; 19 u8 *buf; 20 21 switch (req->cmd) { 22 case DOWNLOAD_FIRMWARE: 23 case GPIO: 24 case WRITE_I2C: 25 case STREAMING_CTRL: 26 requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT); 27 request = req->cmd; 28 break; 29 case READ_I2C: 30 requesttype = (USB_TYPE_VENDOR | USB_DIR_IN); 31 request = req->cmd; 32 break; 33 case GET_CONFIG: 34 requesttype = (USB_TYPE_VENDOR | USB_DIR_IN); 35 request = CONFIG; 36 break; 37 case SET_CONFIG: 38 requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT); 39 request = CONFIG; 40 break; 41 case WRITE_DEMOD: 42 requesttype = (USB_TYPE_VENDOR | USB_DIR_OUT); 43 request = DEMOD_RW; 44 break; 45 case READ_DEMOD: 46 requesttype = (USB_TYPE_VENDOR | USB_DIR_IN); 47 request = DEMOD_RW; 48 break; 49 default: 50 dev_err(&d->udev->dev, "%s: unknown command=%02x\n", 51 KBUILD_MODNAME, req->cmd); 52 ret = -EINVAL; 53 goto error; 54 } 55 56 buf = kmalloc(req->size, GFP_KERNEL); 57 if (!buf) { 58 ret = -ENOMEM; 59 goto error; 60 } 61 62 if (requesttype == (USB_TYPE_VENDOR | USB_DIR_OUT)) { 63 /* write */ 64 memcpy(buf, req->data, req->size); 65 pipe = usb_sndctrlpipe(d->udev, 0); 66 } else { 67 /* read */ 68 pipe = usb_rcvctrlpipe(d->udev, 0); 69 } 70 71 msleep(1); /* avoid I2C errors */ 72 73 ret = usb_control_msg(d->udev, pipe, request, requesttype, req->value, 74 req->index, buf, req->size, EC168_USB_TIMEOUT); 75 76 dvb_usb_dbg_usb_control_msg(d->udev, request, requesttype, req->value, 77 req->index, buf, req->size); 78 79 if (ret < 0) 80 goto err_dealloc; 81 else 82 ret = 0; 83 84 /* read request, copy returned data to return buf */ 85 if (!ret && requesttype == (USB_TYPE_VENDOR | USB_DIR_IN)) 86 memcpy(req->data, buf, req->size); 87 88 kfree(buf); 89 return ret; 90 91 err_dealloc: 92 kfree(buf); 93 error: 94 dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); 95 return ret; 96 } 97 98 /* I2C */ 99 static struct ec100_config ec168_ec100_config; 100 101 static int ec168_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[], 102 int num) 103 { 104 struct dvb_usb_device *d = i2c_get_adapdata(adap); 105 struct ec168_req req; 106 int i = 0; 107 int ret; 108 109 if (num > 2) 110 return -EINVAL; 111 112 if (mutex_lock_interruptible(&d->i2c_mutex) < 0) 113 return -EAGAIN; 114 115 while (i < num) { 116 if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { 117 if (msg[i].addr == ec168_ec100_config.demod_address) { 118 req.cmd = READ_DEMOD; 119 req.value = 0; 120 req.index = 0xff00 + msg[i].buf[0]; /* reg */ 121 req.size = msg[i+1].len; /* bytes to read */ 122 req.data = &msg[i+1].buf[0]; 123 ret = ec168_ctrl_msg(d, &req); 124 i += 2; 125 } else { 126 dev_err(&d->udev->dev, "%s: I2C read not " \ 127 "implemented\n", 128 KBUILD_MODNAME); 129 ret = -EOPNOTSUPP; 130 i += 2; 131 } 132 } else { 133 if (msg[i].addr == ec168_ec100_config.demod_address) { 134 req.cmd = WRITE_DEMOD; 135 req.value = msg[i].buf[1]; /* val */ 136 req.index = 0xff00 + msg[i].buf[0]; /* reg */ 137 req.size = 0; 138 req.data = NULL; 139 ret = ec168_ctrl_msg(d, &req); 140 i += 1; 141 } else { 142 req.cmd = WRITE_I2C; 143 req.value = msg[i].buf[0]; /* val */ 144 req.index = 0x0100 + msg[i].addr; /* I2C addr */ 145 req.size = msg[i].len-1; 146 req.data = &msg[i].buf[1]; 147 ret = ec168_ctrl_msg(d, &req); 148 i += 1; 149 } 150 } 151 if (ret) 152 goto error; 153 154 } 155 ret = i; 156 157 error: 158 mutex_unlock(&d->i2c_mutex); 159 return ret; 160 } 161 162 static u32 ec168_i2c_func(struct i2c_adapter *adapter) 163 { 164 return I2C_FUNC_I2C; 165 } 166 167 static struct i2c_algorithm ec168_i2c_algo = { 168 .master_xfer = ec168_i2c_xfer, 169 .functionality = ec168_i2c_func, 170 }; 171 172 /* Callbacks for DVB USB */ 173 static int ec168_identify_state(struct dvb_usb_device *d, const char **name) 174 { 175 int ret; 176 u8 reply; 177 struct ec168_req req = {GET_CONFIG, 0, 1, sizeof(reply), &reply}; 178 dev_dbg(&d->udev->dev, "%s:\n", __func__); 179 180 ret = ec168_ctrl_msg(d, &req); 181 if (ret) 182 goto error; 183 184 dev_dbg(&d->udev->dev, "%s: reply=%02x\n", __func__, reply); 185 186 if (reply == 0x01) 187 ret = WARM; 188 else 189 ret = COLD; 190 191 return ret; 192 error: 193 dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); 194 return ret; 195 } 196 197 static int ec168_download_firmware(struct dvb_usb_device *d, 198 const struct firmware *fw) 199 { 200 int ret, len, remaining; 201 struct ec168_req req = {DOWNLOAD_FIRMWARE, 0, 0, 0, NULL}; 202 dev_dbg(&d->udev->dev, "%s:\n", __func__); 203 204 #define LEN_MAX 2048 /* max packet size */ 205 for (remaining = fw->size; remaining > 0; remaining -= LEN_MAX) { 206 len = remaining; 207 if (len > LEN_MAX) 208 len = LEN_MAX; 209 210 req.size = len; 211 req.data = (u8 *) &fw->data[fw->size - remaining]; 212 req.index = fw->size - remaining; 213 214 ret = ec168_ctrl_msg(d, &req); 215 if (ret) { 216 dev_err(&d->udev->dev, 217 "%s: firmware download failed=%d\n", 218 KBUILD_MODNAME, ret); 219 goto error; 220 } 221 } 222 223 req.size = 0; 224 225 /* set "warm"? */ 226 req.cmd = SET_CONFIG; 227 req.value = 0; 228 req.index = 0x0001; 229 ret = ec168_ctrl_msg(d, &req); 230 if (ret) 231 goto error; 232 233 /* really needed - no idea what does */ 234 req.cmd = GPIO; 235 req.value = 0; 236 req.index = 0x0206; 237 ret = ec168_ctrl_msg(d, &req); 238 if (ret) 239 goto error; 240 241 /* activate tuner I2C? */ 242 req.cmd = WRITE_I2C; 243 req.value = 0; 244 req.index = 0x00c6; 245 ret = ec168_ctrl_msg(d, &req); 246 if (ret) 247 goto error; 248 249 return ret; 250 error: 251 dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); 252 return ret; 253 } 254 255 static struct ec100_config ec168_ec100_config = { 256 .demod_address = 0xff, /* not real address, demod is integrated */ 257 }; 258 259 static int ec168_ec100_frontend_attach(struct dvb_usb_adapter *adap) 260 { 261 struct dvb_usb_device *d = adap_to_d(adap); 262 dev_dbg(&d->udev->dev, "%s:\n", __func__); 263 264 adap->fe[0] = dvb_attach(ec100_attach, &ec168_ec100_config, 265 &d->i2c_adap); 266 if (adap->fe[0] == NULL) 267 return -ENODEV; 268 269 return 0; 270 } 271 272 static struct mxl5005s_config ec168_mxl5003s_config = { 273 .i2c_address = 0xc6, 274 .if_freq = IF_FREQ_4570000HZ, 275 .xtal_freq = CRYSTAL_FREQ_16000000HZ, 276 .agc_mode = MXL_SINGLE_AGC, 277 .tracking_filter = MXL_TF_OFF, 278 .rssi_enable = MXL_RSSI_ENABLE, 279 .cap_select = MXL_CAP_SEL_ENABLE, 280 .div_out = MXL_DIV_OUT_4, 281 .clock_out = MXL_CLOCK_OUT_DISABLE, 282 .output_load = MXL5005S_IF_OUTPUT_LOAD_200_OHM, 283 .top = MXL5005S_TOP_25P2, 284 .mod_mode = MXL_DIGITAL_MODE, 285 .if_mode = MXL_ZERO_IF, 286 .AgcMasterByte = 0x00, 287 }; 288 289 static int ec168_mxl5003s_tuner_attach(struct dvb_usb_adapter *adap) 290 { 291 struct dvb_usb_device *d = adap_to_d(adap); 292 dev_dbg(&d->udev->dev, "%s:\n", __func__); 293 294 return dvb_attach(mxl5005s_attach, adap->fe[0], &d->i2c_adap, 295 &ec168_mxl5003s_config) == NULL ? -ENODEV : 0; 296 } 297 298 static int ec168_streaming_ctrl(struct dvb_frontend *fe, int onoff) 299 { 300 struct dvb_usb_device *d = fe_to_d(fe); 301 struct ec168_req req = {STREAMING_CTRL, 0x7f01, 0x0202, 0, NULL}; 302 dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); 303 304 if (onoff) 305 req.index = 0x0102; 306 return ec168_ctrl_msg(d, &req); 307 } 308 309 /* DVB USB Driver stuff */ 310 /* bInterfaceNumber 0 is HID 311 * bInterfaceNumber 1 is DVB-T */ 312 static const struct dvb_usb_device_properties ec168_props = { 313 .driver_name = KBUILD_MODNAME, 314 .owner = THIS_MODULE, 315 .adapter_nr = adapter_nr, 316 .bInterfaceNumber = 1, 317 318 .identify_state = ec168_identify_state, 319 .firmware = EC168_FIRMWARE, 320 .download_firmware = ec168_download_firmware, 321 322 .i2c_algo = &ec168_i2c_algo, 323 .frontend_attach = ec168_ec100_frontend_attach, 324 .tuner_attach = ec168_mxl5003s_tuner_attach, 325 .streaming_ctrl = ec168_streaming_ctrl, 326 327 .num_adapters = 1, 328 .adapter = { 329 { 330 .stream = DVB_USB_STREAM_BULK(0x82, 6, 32 * 512), 331 } 332 }, 333 }; 334 335 static const struct usb_device_id ec168_id[] = { 336 { DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168, 337 &ec168_props, "E3C EC168 reference design", NULL)}, 338 { DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_2, 339 &ec168_props, "E3C EC168 reference design", NULL)}, 340 { DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_3, 341 &ec168_props, "E3C EC168 reference design", NULL)}, 342 { DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_4, 343 &ec168_props, "E3C EC168 reference design", NULL)}, 344 { DVB_USB_DEVICE(USB_VID_E3C, USB_PID_E3C_EC168_5, 345 &ec168_props, "E3C EC168 reference design", NULL)}, 346 {} 347 }; 348 MODULE_DEVICE_TABLE(usb, ec168_id); 349 350 static struct usb_driver ec168_driver = { 351 .name = KBUILD_MODNAME, 352 .id_table = ec168_id, 353 .probe = dvb_usbv2_probe, 354 .disconnect = dvb_usbv2_disconnect, 355 .suspend = dvb_usbv2_suspend, 356 .resume = dvb_usbv2_resume, 357 .no_dynamic_id = 1, 358 .soft_unbind = 1, 359 }; 360 361 module_usb_driver(ec168_driver); 362 363 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); 364 MODULE_DESCRIPTION("E3C EC168 driver"); 365 MODULE_LICENSE("GPL"); 366 MODULE_FIRMWARE(EC168_FIRMWARE); 367