1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * DVB USB Linux driver for Anysee E30 DVB-C & DVB-T USB2.0 receiver 4 * 5 * Copyright (C) 2007 Antti Palosaari <crope@iki.fi> 6 * 7 * TODO: 8 * - add smart card reader support for Conditional Access (CA) 9 * 10 * Card reader in Anysee is nothing more than ISO 7816 card reader. 11 * There is no hardware CAM in any Anysee device sold. 12 * In my understanding it should be implemented by making own module 13 * for ISO 7816 card reader, like dvb_ca_en50221 is implemented. This 14 * module registers serial interface that can be used to communicate 15 * with any ISO 7816 smart card. 16 * 17 * Any help according to implement serial smart card reader support 18 * is highly welcome! 19 */ 20 21 #include "anysee.h" 22 #include "dvb-pll.h" 23 #include "tda1002x.h" 24 #include "mt352.h" 25 #include "mt352_priv.h" 26 #include "zl10353.h" 27 #include "tda18212.h" 28 #include "cx24116.h" 29 #include "stv0900.h" 30 #include "stv6110.h" 31 #include "isl6423.h" 32 #include "cxd2820r.h" 33 34 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); 35 36 static int anysee_ctrl_msg(struct dvb_usb_device *d, 37 u8 *sbuf, u8 slen, u8 *rbuf, u8 rlen) 38 { 39 struct anysee_state *state = d_to_priv(d); 40 int act_len, ret, i; 41 42 mutex_lock(&d->usb_mutex); 43 44 memcpy(&state->buf[0], sbuf, slen); 45 state->buf[60] = state->seq++; 46 47 dev_dbg(&d->udev->dev, "%s: >>> %*ph\n", __func__, slen, state->buf); 48 49 /* We need receive one message more after dvb_usb_generic_rw due 50 to weird transaction flow, which is 1 x send + 2 x receive. */ 51 ret = dvb_usbv2_generic_rw_locked(d, state->buf, sizeof(state->buf), 52 state->buf, sizeof(state->buf)); 53 if (ret) 54 goto error_unlock; 55 56 /* TODO FIXME: dvb_usb_generic_rw() fails rarely with error code -32 57 * (EPIPE, Broken pipe). Function supports currently msleep() as a 58 * parameter but I would not like to use it, since according to 59 * Documentation/timers/timers-howto.rst it should not be used such 60 * short, under < 20ms, sleeps. Repeating failed message would be 61 * better choice as not to add unwanted delays... 62 * Fixing that correctly is one of those or both; 63 * 1) use repeat if possible 64 * 2) add suitable delay 65 */ 66 67 /* get answer, retry few times if error returned */ 68 for (i = 0; i < 3; i++) { 69 /* receive 2nd answer */ 70 ret = usb_bulk_msg(d->udev, usb_rcvbulkpipe(d->udev, 71 d->props->generic_bulk_ctrl_endpoint), 72 state->buf, sizeof(state->buf), &act_len, 2000); 73 if (ret) { 74 dev_dbg(&d->udev->dev, 75 "%s: recv bulk message failed=%d\n", 76 __func__, ret); 77 } else { 78 dev_dbg(&d->udev->dev, "%s: <<< %*ph\n", __func__, 79 rlen, state->buf); 80 81 if (state->buf[63] != 0x4f) 82 dev_dbg(&d->udev->dev, 83 "%s: cmd failed\n", __func__); 84 break; 85 } 86 } 87 88 if (ret) { 89 /* all retries failed, it is fatal */ 90 dev_err(&d->udev->dev, "%s: recv bulk message failed=%d\n", 91 KBUILD_MODNAME, ret); 92 goto error_unlock; 93 } 94 95 /* read request, copy returned data to return buf */ 96 if (rbuf && rlen) 97 memcpy(rbuf, state->buf, rlen); 98 99 error_unlock: 100 mutex_unlock(&d->usb_mutex); 101 return ret; 102 } 103 104 static int anysee_read_reg(struct dvb_usb_device *d, u16 reg, u8 *val) 105 { 106 u8 buf[] = {CMD_REG_READ, reg >> 8, reg & 0xff, 0x01}; 107 int ret; 108 ret = anysee_ctrl_msg(d, buf, sizeof(buf), val, 1); 109 dev_dbg(&d->udev->dev, "%s: reg=%04x val=%02x\n", __func__, reg, *val); 110 return ret; 111 } 112 113 static int anysee_write_reg(struct dvb_usb_device *d, u16 reg, u8 val) 114 { 115 u8 buf[] = {CMD_REG_WRITE, reg >> 8, reg & 0xff, 0x01, val}; 116 dev_dbg(&d->udev->dev, "%s: reg=%04x val=%02x\n", __func__, reg, val); 117 return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); 118 } 119 120 /* write single register with mask */ 121 static int anysee_wr_reg_mask(struct dvb_usb_device *d, u16 reg, u8 val, 122 u8 mask) 123 { 124 int ret; 125 u8 tmp; 126 127 /* no need for read if whole reg is written */ 128 if (mask != 0xff) { 129 ret = anysee_read_reg(d, reg, &tmp); 130 if (ret) 131 return ret; 132 133 val &= mask; 134 tmp &= ~mask; 135 val |= tmp; 136 } 137 138 return anysee_write_reg(d, reg, val); 139 } 140 141 /* read single register with mask */ 142 static int anysee_rd_reg_mask(struct dvb_usb_device *d, u16 reg, u8 *val, 143 u8 mask) 144 { 145 int ret, i; 146 u8 tmp; 147 148 ret = anysee_read_reg(d, reg, &tmp); 149 if (ret) 150 return ret; 151 152 tmp &= mask; 153 154 /* find position of the first bit */ 155 for (i = 0; i < 8; i++) { 156 if ((mask >> i) & 0x01) 157 break; 158 } 159 *val = tmp >> i; 160 161 return 0; 162 } 163 164 static int anysee_get_hw_info(struct dvb_usb_device *d, u8 *id) 165 { 166 u8 buf[] = {CMD_GET_HW_INFO}; 167 return anysee_ctrl_msg(d, buf, sizeof(buf), id, 3); 168 } 169 170 static int anysee_streaming_ctrl(struct dvb_frontend *fe, int onoff) 171 { 172 u8 buf[] = {CMD_STREAMING_CTRL, (u8)onoff, 0x00}; 173 dev_dbg(&fe_to_d(fe)->udev->dev, "%s: onoff=%d\n", __func__, onoff); 174 return anysee_ctrl_msg(fe_to_d(fe), buf, sizeof(buf), NULL, 0); 175 } 176 177 static int anysee_led_ctrl(struct dvb_usb_device *d, u8 mode, u8 interval) 178 { 179 u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x01, mode, interval}; 180 dev_dbg(&d->udev->dev, "%s: state=%d interval=%d\n", __func__, 181 mode, interval); 182 return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); 183 } 184 185 static int anysee_ir_ctrl(struct dvb_usb_device *d, u8 onoff) 186 { 187 u8 buf[] = {CMD_LED_AND_IR_CTRL, 0x02, onoff}; 188 dev_dbg(&d->udev->dev, "%s: onoff=%d\n", __func__, onoff); 189 return anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); 190 } 191 192 /* I2C */ 193 static int anysee_master_xfer(struct i2c_adapter *adap, struct i2c_msg *msg, 194 int num) 195 { 196 struct dvb_usb_device *d = i2c_get_adapdata(adap); 197 int ret = 0, inc, i = 0; 198 u8 buf[52]; /* 4 + 48 (I2C WR USB command header + I2C WR max) */ 199 200 if (mutex_lock_interruptible(&d->i2c_mutex) < 0) 201 return -EAGAIN; 202 203 while (i < num) { 204 if (num > i + 1 && (msg[i+1].flags & I2C_M_RD)) { 205 if (msg[i].len > 2 || msg[i+1].len > 60) { 206 ret = -EOPNOTSUPP; 207 break; 208 } 209 buf[0] = CMD_I2C_READ; 210 buf[1] = (msg[i].addr << 1) | 0x01; 211 buf[2] = msg[i].buf[0]; 212 buf[3] = msg[i].buf[1]; 213 buf[4] = msg[i].len-1; 214 buf[5] = msg[i+1].len; 215 ret = anysee_ctrl_msg(d, buf, 6, msg[i+1].buf, 216 msg[i+1].len); 217 inc = 2; 218 } else { 219 if (msg[i].len > 48) { 220 ret = -EOPNOTSUPP; 221 break; 222 } 223 buf[0] = CMD_I2C_WRITE; 224 buf[1] = (msg[i].addr << 1); 225 buf[2] = msg[i].len; 226 buf[3] = 0x01; 227 memcpy(&buf[4], msg[i].buf, msg[i].len); 228 ret = anysee_ctrl_msg(d, buf, 4 + msg[i].len, NULL, 0); 229 inc = 1; 230 } 231 if (ret) 232 break; 233 234 i += inc; 235 } 236 237 mutex_unlock(&d->i2c_mutex); 238 239 return ret ? ret : i; 240 } 241 242 static u32 anysee_i2c_func(struct i2c_adapter *adapter) 243 { 244 return I2C_FUNC_I2C; 245 } 246 247 static struct i2c_algorithm anysee_i2c_algo = { 248 .master_xfer = anysee_master_xfer, 249 .functionality = anysee_i2c_func, 250 }; 251 252 static int anysee_mt352_demod_init(struct dvb_frontend *fe) 253 { 254 static u8 clock_config[] = { CLOCK_CTL, 0x38, 0x28 }; 255 static u8 reset[] = { RESET, 0x80 }; 256 static u8 adc_ctl_1_cfg[] = { ADC_CTL_1, 0x40 }; 257 static u8 agc_cfg[] = { AGC_TARGET, 0x28, 0x20 }; 258 static u8 gpp_ctl_cfg[] = { GPP_CTL, 0x33 }; 259 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x32 }; 260 261 mt352_write(fe, clock_config, sizeof(clock_config)); 262 udelay(200); 263 mt352_write(fe, reset, sizeof(reset)); 264 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); 265 266 mt352_write(fe, agc_cfg, sizeof(agc_cfg)); 267 mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); 268 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); 269 270 return 0; 271 } 272 273 /* Callbacks for DVB USB */ 274 static struct tda10023_config anysee_tda10023_config = { 275 .demod_address = (0x1a >> 1), 276 .invert = 0, 277 .xtal = 16000000, 278 .pll_m = 11, 279 .pll_p = 3, 280 .pll_n = 1, 281 .output_mode = TDA10023_OUTPUT_MODE_PARALLEL_C, 282 .deltaf = 0xfeeb, 283 }; 284 285 static struct mt352_config anysee_mt352_config = { 286 .demod_address = (0x1e >> 1), 287 .demod_init = anysee_mt352_demod_init, 288 }; 289 290 static struct zl10353_config anysee_zl10353_config = { 291 .demod_address = (0x1e >> 1), 292 .parallel_ts = 1, 293 }; 294 295 static struct zl10353_config anysee_zl10353_tda18212_config2 = { 296 .demod_address = (0x1e >> 1), 297 .parallel_ts = 1, 298 .disable_i2c_gate_ctrl = 1, 299 .no_tuner = 1, 300 .if2 = 41500, 301 }; 302 303 static struct zl10353_config anysee_zl10353_tda18212_config = { 304 .demod_address = (0x18 >> 1), 305 .parallel_ts = 1, 306 .disable_i2c_gate_ctrl = 1, 307 .no_tuner = 1, 308 .if2 = 41500, 309 }; 310 311 static struct tda10023_config anysee_tda10023_tda18212_config = { 312 .demod_address = (0x1a >> 1), 313 .xtal = 16000000, 314 .pll_m = 12, 315 .pll_p = 3, 316 .pll_n = 1, 317 .output_mode = TDA10023_OUTPUT_MODE_PARALLEL_B, 318 .deltaf = 0xba02, 319 }; 320 321 static const struct tda18212_config anysee_tda18212_config = { 322 .if_dvbt_6 = 4150, 323 .if_dvbt_7 = 4150, 324 .if_dvbt_8 = 4150, 325 .if_dvbc = 5000, 326 }; 327 328 static const struct tda18212_config anysee_tda18212_config2 = { 329 .if_dvbt_6 = 3550, 330 .if_dvbt_7 = 3700, 331 .if_dvbt_8 = 4150, 332 .if_dvbt2_6 = 3250, 333 .if_dvbt2_7 = 4000, 334 .if_dvbt2_8 = 4000, 335 .if_dvbc = 5000, 336 }; 337 338 static struct cx24116_config anysee_cx24116_config = { 339 .demod_address = (0xaa >> 1), 340 .mpg_clk_pos_pol = 0x00, 341 .i2c_wr_max = 48, 342 }; 343 344 static struct stv0900_config anysee_stv0900_config = { 345 .demod_address = (0xd0 >> 1), 346 .demod_mode = 0, 347 .xtal = 8000000, 348 .clkmode = 3, 349 .diseqc_mode = 2, 350 .tun1_maddress = 0, 351 .tun1_adc = 1, /* 1 Vpp */ 352 .path1_mode = 3, 353 }; 354 355 static struct stv6110_config anysee_stv6110_config = { 356 .i2c_address = (0xc0 >> 1), 357 .mclk = 16000000, 358 .clk_div = 1, 359 }; 360 361 static struct isl6423_config anysee_isl6423_config = { 362 .current_max = SEC_CURRENT_800m, 363 .curlim = SEC_CURRENT_LIM_OFF, 364 .mod_extern = 1, 365 .addr = (0x10 >> 1), 366 }; 367 368 static struct cxd2820r_config anysee_cxd2820r_config = { 369 .i2c_address = 0x6d, /* (0xda >> 1) */ 370 .ts_mode = 0x38, 371 }; 372 373 /* 374 * New USB device strings: Mfr=1, Product=2, SerialNumber=0 375 * Manufacturer: AMT.CO.KR 376 * 377 * E30 VID=04b4 PID=861f HW=2 FW=2.1 Product=???????? 378 * PCB: ? 379 * parts: DNOS404ZH102A(MT352, DTT7579(?)) 380 * 381 * E30 VID=04b4 PID=861f HW=2 FW=2.1 "anysee-T(LP)" 382 * PCB: PCB 507T (rev1.61) 383 * parts: DNOS404ZH103A(ZL10353, DTT7579(?)) 384 * OEA=0a OEB=00 OEC=00 OED=ff OEE=00 385 * IOA=45 IOB=ff IOC=00 IOD=ff IOE=00 386 * 387 * E30 Plus VID=04b4 PID=861f HW=6 FW=1.0 "anysee" 388 * PCB: 507CD (rev1.1) 389 * parts: DNOS404ZH103A(ZL10353, DTT7579(?)), CST56I01 390 * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe 391 * IOA=4f IOB=ff IOC=00 IOD=06 IOE=01 392 * IOD[0] ZL10353 1=enabled 393 * IOA[7] TS 0=enabled 394 * tuner is not behind ZL10353 I2C-gate (no care if gate disabled or not) 395 * 396 * E30 C Plus VID=04b4 PID=861f HW=10 FW=1.0 "anysee-DC(LP)" 397 * PCB: 507DC (rev0.2) 398 * parts: TDA10023, DTOS403IH102B TM, CST56I01 399 * OEA=80 OEB=00 OEC=00 OED=ff OEE=fe 400 * IOA=4f IOB=ff IOC=00 IOD=26 IOE=01 401 * IOD[0] TDA10023 1=enabled 402 * 403 * E30 S2 Plus VID=04b4 PID=861f HW=11 FW=0.1 "anysee-S2(LP)" 404 * PCB: 507SI (rev2.1) 405 * parts: BS2N10WCC01(CX24116, CX24118), ISL6423, TDA8024 406 * OEA=80 OEB=00 OEC=ff OED=ff OEE=fe 407 * IOA=4d IOB=ff IOC=00 IOD=26 IOE=01 408 * IOD[0] CX24116 1=enabled 409 * 410 * E30 C Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)" 411 * PCB: 507FA (rev0.4) 412 * parts: TDA10023, DTOS403IH102B TM, TDA8024 413 * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff 414 * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0 415 * IOD[5] TDA10023 1=enabled 416 * IOE[0] tuner 1=enabled 417 * 418 * E30 Combo Plus VID=1c73 PID=861f HW=15 FW=1.2 "anysee-FA(LP)" 419 * PCB: 507FA (rev1.1) 420 * parts: ZL10353, TDA10023, DTOS403IH102B TM, TDA8024 421 * OEA=80 OEB=00 OEC=ff OED=ff OEE=ff 422 * IOA=4d IOB=ff IOC=00 IOD=00 IOE=c0 423 * DVB-C: 424 * IOD[5] TDA10023 1=enabled 425 * IOE[0] tuner 1=enabled 426 * DVB-T: 427 * IOD[0] ZL10353 1=enabled 428 * IOE[0] tuner 0=enabled 429 * tuner is behind ZL10353 I2C-gate 430 * tuner is behind TDA10023 I2C-gate 431 * 432 * E7 TC VID=1c73 PID=861f HW=18 FW=0.7 AMTCI=0.5 "anysee-E7TC(LP)" 433 * PCB: 508TC (rev0.6) 434 * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212) 435 * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff 436 * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4 437 * IOA[7] TS 1=enabled 438 * IOE[4] TDA18212 1=enabled 439 * DVB-C: 440 * IOD[6] ZL10353 0=disabled 441 * IOD[5] TDA10023 1=enabled 442 * IOE[0] IF 1=enabled 443 * DVB-T: 444 * IOD[5] TDA10023 0=disabled 445 * IOD[6] ZL10353 1=enabled 446 * IOE[0] IF 0=enabled 447 * 448 * E7 S2 VID=1c73 PID=861f HW=19 FW=0.4 AMTCI=0.5 "anysee-E7S2(LP)" 449 * PCB: 508S2 (rev0.7) 450 * parts: DNBU10512IST(STV0903, STV6110), ISL6423 451 * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff 452 * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4 453 * IOA[7] TS 1=enabled 454 * IOE[5] STV0903 1=enabled 455 * 456 * E7 T2C VID=1c73 PID=861f HW=20 FW=0.1 AMTCI=0.5 "anysee-E7T2C(LP)" 457 * PCB: 508T2C (rev0.3) 458 * parts: DNOQ44QCH106A(CXD2820R, TDA18212), TDA8024 459 * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff 460 * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4 461 * IOA[7] TS 1=enabled 462 * IOE[5] CXD2820R 1=enabled 463 * 464 * E7 PTC VID=1c73 PID=861f HW=21 FW=0.1 AMTCI=?? "anysee-E7PTC(LP)" 465 * PCB: 508PTC (rev0.5) 466 * parts: ZL10353, TDA10023, DNOD44CDH086A(TDA18212) 467 * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff 468 * IOA=4d IOB=00 IOC=cc IOD=48 IOE=e4 469 * IOA[7] TS 1=enabled 470 * IOE[4] TDA18212 1=enabled 471 * DVB-C: 472 * IOD[6] ZL10353 0=disabled 473 * IOD[5] TDA10023 1=enabled 474 * IOE[0] IF 1=enabled 475 * DVB-T: 476 * IOD[5] TDA10023 0=disabled 477 * IOD[6] ZL10353 1=enabled 478 * IOE[0] IF 0=enabled 479 * 480 * E7 PS2 VID=1c73 PID=861f HW=22 FW=0.1 AMTCI=?? "anysee-E7PS2(LP)" 481 * PCB: 508PS2 (rev0.4) 482 * parts: DNBU10512IST(STV0903, STV6110), ISL6423 483 * OEA=80 OEB=00 OEC=03 OED=f7 OEE=ff 484 * IOA=4d IOB=00 IOC=c4 IOD=08 IOE=e4 485 * IOA[7] TS 1=enabled 486 * IOE[5] STV0903 1=enabled 487 */ 488 489 static int anysee_read_config(struct dvb_usb_device *d) 490 { 491 struct anysee_state *state = d_to_priv(d); 492 int ret; 493 u8 hw_info[3]; 494 495 /* 496 * Check which hardware we have. 497 * We must do this call two times to get reliable values (hw/fw bug). 498 */ 499 ret = anysee_get_hw_info(d, hw_info); 500 if (ret) 501 goto error; 502 503 ret = anysee_get_hw_info(d, hw_info); 504 if (ret) 505 goto error; 506 507 /* 508 * Meaning of these info bytes are guessed. 509 */ 510 dev_info(&d->udev->dev, "%s: firmware version %d.%d hardware id %d\n", 511 KBUILD_MODNAME, hw_info[1], hw_info[2], hw_info[0]); 512 513 state->hw = hw_info[0]; 514 error: 515 return ret; 516 } 517 518 /* external I2C gate used for DNOD44CDH086A(TDA18212) tuner module */ 519 static int anysee_i2c_gate_ctrl(struct dvb_frontend *fe, int enable) 520 { 521 /* enable / disable tuner access on IOE[4] */ 522 return anysee_wr_reg_mask(fe_to_d(fe), REG_IOE, (enable << 4), 0x10); 523 } 524 525 static int anysee_frontend_ctrl(struct dvb_frontend *fe, int onoff) 526 { 527 struct anysee_state *state = fe_to_priv(fe); 528 struct dvb_usb_device *d = fe_to_d(fe); 529 int ret; 530 dev_dbg(&d->udev->dev, "%s: fe=%d onoff=%d\n", __func__, fe->id, onoff); 531 532 /* no frontend sleep control */ 533 if (onoff == 0) 534 return 0; 535 536 switch (state->hw) { 537 case ANYSEE_HW_507FA: /* 15 */ 538 /* E30 Combo Plus */ 539 /* E30 C Plus */ 540 541 if (fe->id == 0) { 542 /* disable DVB-T demod on IOD[0] */ 543 ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 0), 0x01); 544 if (ret) 545 goto error; 546 547 /* enable DVB-C demod on IOD[5] */ 548 ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20); 549 if (ret) 550 goto error; 551 552 /* enable DVB-C tuner on IOE[0] */ 553 ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 0), 0x01); 554 if (ret) 555 goto error; 556 } else { 557 /* disable DVB-C demod on IOD[5] */ 558 ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20); 559 if (ret) 560 goto error; 561 562 /* enable DVB-T demod on IOD[0] */ 563 ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01); 564 if (ret) 565 goto error; 566 567 /* enable DVB-T tuner on IOE[0] */ 568 ret = anysee_wr_reg_mask(d, REG_IOE, (0 << 0), 0x01); 569 if (ret) 570 goto error; 571 } 572 573 break; 574 case ANYSEE_HW_508TC: /* 18 */ 575 case ANYSEE_HW_508PTC: /* 21 */ 576 /* E7 TC */ 577 /* E7 PTC */ 578 579 if (fe->id == 0) { 580 /* disable DVB-T demod on IOD[6] */ 581 ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 6), 0x40); 582 if (ret) 583 goto error; 584 585 /* enable DVB-C demod on IOD[5] */ 586 ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20); 587 if (ret) 588 goto error; 589 590 /* enable IF route on IOE[0] */ 591 ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 0), 0x01); 592 if (ret) 593 goto error; 594 } else { 595 /* disable DVB-C demod on IOD[5] */ 596 ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20); 597 if (ret) 598 goto error; 599 600 /* enable DVB-T demod on IOD[6] */ 601 ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 6), 0x40); 602 if (ret) 603 goto error; 604 605 /* enable IF route on IOE[0] */ 606 ret = anysee_wr_reg_mask(d, REG_IOE, (0 << 0), 0x01); 607 if (ret) 608 goto error; 609 } 610 611 break; 612 default: 613 ret = 0; 614 } 615 616 error: 617 return ret; 618 } 619 620 static int anysee_add_i2c_dev(struct dvb_usb_device *d, const char *type, 621 u8 addr, void *platform_data) 622 { 623 int ret, num; 624 struct anysee_state *state = d_to_priv(d); 625 struct i2c_client *client; 626 struct i2c_adapter *adapter = &d->i2c_adap; 627 struct i2c_board_info board_info = { 628 .addr = addr, 629 .platform_data = platform_data, 630 }; 631 632 strscpy(board_info.type, type, I2C_NAME_SIZE); 633 634 /* find first free client */ 635 for (num = 0; num < ANYSEE_I2C_CLIENT_MAX; num++) { 636 if (state->i2c_client[num] == NULL) 637 break; 638 } 639 640 dev_dbg(&d->udev->dev, "%s: num=%d\n", __func__, num); 641 642 if (num == ANYSEE_I2C_CLIENT_MAX) { 643 dev_err(&d->udev->dev, "%s: I2C client out of index\n", 644 KBUILD_MODNAME); 645 ret = -ENODEV; 646 goto err; 647 } 648 649 request_module("%s", board_info.type); 650 651 /* register I2C device */ 652 client = i2c_new_client_device(adapter, &board_info); 653 if (!i2c_client_has_driver(client)) { 654 ret = -ENODEV; 655 goto err; 656 } 657 658 /* increase I2C driver usage count */ 659 if (!try_module_get(client->dev.driver->owner)) { 660 i2c_unregister_device(client); 661 ret = -ENODEV; 662 goto err; 663 } 664 665 state->i2c_client[num] = client; 666 return 0; 667 err: 668 dev_dbg(&d->udev->dev, "%s: failed=%d\n", __func__, ret); 669 return ret; 670 } 671 672 static void anysee_del_i2c_dev(struct dvb_usb_device *d) 673 { 674 int num; 675 struct anysee_state *state = d_to_priv(d); 676 struct i2c_client *client; 677 678 /* find last used client */ 679 num = ANYSEE_I2C_CLIENT_MAX; 680 while (num--) { 681 if (state->i2c_client[num] != NULL) 682 break; 683 } 684 685 dev_dbg(&d->udev->dev, "%s: num=%d\n", __func__, num); 686 687 if (num == -1) { 688 dev_err(&d->udev->dev, "%s: I2C client out of index\n", 689 KBUILD_MODNAME); 690 goto err; 691 } 692 693 client = state->i2c_client[num]; 694 695 /* decrease I2C driver usage count */ 696 module_put(client->dev.driver->owner); 697 698 /* unregister I2C device */ 699 i2c_unregister_device(client); 700 701 state->i2c_client[num] = NULL; 702 err: 703 dev_dbg(&d->udev->dev, "%s: failed\n", __func__); 704 } 705 706 static int anysee_frontend_attach(struct dvb_usb_adapter *adap) 707 { 708 struct anysee_state *state = adap_to_priv(adap); 709 struct dvb_usb_device *d = adap_to_d(adap); 710 int ret = 0; 711 u8 tmp; 712 struct i2c_msg msg[2] = { 713 { 714 .addr = 0x60, 715 .flags = 0, 716 .len = 1, 717 .buf = "\x00", 718 }, { 719 .addr = 0x60, 720 .flags = I2C_M_RD, 721 .len = 1, 722 .buf = &tmp, 723 } 724 }; 725 726 switch (state->hw) { 727 case ANYSEE_HW_507T: /* 2 */ 728 /* E30 */ 729 730 /* attach demod */ 731 adap->fe[0] = dvb_attach(mt352_attach, &anysee_mt352_config, 732 &d->i2c_adap); 733 if (adap->fe[0]) 734 break; 735 736 /* attach demod */ 737 adap->fe[0] = dvb_attach(zl10353_attach, &anysee_zl10353_config, 738 &d->i2c_adap); 739 740 break; 741 case ANYSEE_HW_507CD: /* 6 */ 742 /* E30 Plus */ 743 744 /* enable DVB-T demod on IOD[0] */ 745 ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01); 746 if (ret) 747 goto error; 748 749 /* enable transport stream on IOA[7] */ 750 ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80); 751 if (ret) 752 goto error; 753 754 /* attach demod */ 755 adap->fe[0] = dvb_attach(zl10353_attach, &anysee_zl10353_config, 756 &d->i2c_adap); 757 758 break; 759 case ANYSEE_HW_507DC: /* 10 */ 760 /* E30 C Plus */ 761 762 /* enable DVB-C demod on IOD[0] */ 763 ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01); 764 if (ret) 765 goto error; 766 767 /* attach demod */ 768 adap->fe[0] = dvb_attach(tda10023_attach, 769 &anysee_tda10023_config, &d->i2c_adap, 0x48); 770 771 break; 772 case ANYSEE_HW_507SI: /* 11 */ 773 /* E30 S2 Plus */ 774 775 /* enable DVB-S/S2 demod on IOD[0] */ 776 ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01); 777 if (ret) 778 goto error; 779 780 /* attach demod */ 781 adap->fe[0] = dvb_attach(cx24116_attach, &anysee_cx24116_config, 782 &d->i2c_adap); 783 784 break; 785 case ANYSEE_HW_507FA: /* 15 */ 786 /* E30 Combo Plus */ 787 /* E30 C Plus */ 788 789 /* enable tuner on IOE[4] */ 790 ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 4), 0x10); 791 if (ret) 792 goto error; 793 794 /* probe TDA18212 */ 795 tmp = 0; 796 ret = i2c_transfer(&d->i2c_adap, msg, 2); 797 if (ret == 2 && tmp == 0xc7) { 798 dev_dbg(&d->udev->dev, "%s: TDA18212 found\n", 799 __func__); 800 state->has_tda18212 = true; 801 } 802 else 803 tmp = 0; 804 805 /* disable tuner on IOE[4] */ 806 ret = anysee_wr_reg_mask(d, REG_IOE, (0 << 4), 0x10); 807 if (ret) 808 goto error; 809 810 /* disable DVB-T demod on IOD[0] */ 811 ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 0), 0x01); 812 if (ret) 813 goto error; 814 815 /* enable DVB-C demod on IOD[5] */ 816 ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20); 817 if (ret) 818 goto error; 819 820 /* attach demod */ 821 if (tmp == 0xc7) { 822 /* TDA18212 config */ 823 adap->fe[0] = dvb_attach(tda10023_attach, 824 &anysee_tda10023_tda18212_config, 825 &d->i2c_adap, 0x48); 826 827 /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */ 828 if (adap->fe[0]) 829 adap->fe[0]->ops.i2c_gate_ctrl = 830 anysee_i2c_gate_ctrl; 831 } else { 832 /* PLL config */ 833 adap->fe[0] = dvb_attach(tda10023_attach, 834 &anysee_tda10023_config, 835 &d->i2c_adap, 0x48); 836 } 837 838 /* break out if first frontend attaching fails */ 839 if (!adap->fe[0]) 840 break; 841 842 /* disable DVB-C demod on IOD[5] */ 843 ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20); 844 if (ret) 845 goto error; 846 847 /* enable DVB-T demod on IOD[0] */ 848 ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 0), 0x01); 849 if (ret) 850 goto error; 851 852 /* attach demod */ 853 if (tmp == 0xc7) { 854 /* TDA18212 config */ 855 adap->fe[1] = dvb_attach(zl10353_attach, 856 &anysee_zl10353_tda18212_config2, 857 &d->i2c_adap); 858 859 /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */ 860 if (adap->fe[1]) 861 adap->fe[1]->ops.i2c_gate_ctrl = 862 anysee_i2c_gate_ctrl; 863 } else { 864 /* PLL config */ 865 adap->fe[1] = dvb_attach(zl10353_attach, 866 &anysee_zl10353_config, 867 &d->i2c_adap); 868 } 869 870 break; 871 case ANYSEE_HW_508TC: /* 18 */ 872 case ANYSEE_HW_508PTC: /* 21 */ 873 /* E7 TC */ 874 /* E7 PTC */ 875 876 /* disable DVB-T demod on IOD[6] */ 877 ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 6), 0x40); 878 if (ret) 879 goto error; 880 881 /* enable DVB-C demod on IOD[5] */ 882 ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 5), 0x20); 883 if (ret) 884 goto error; 885 886 /* attach demod */ 887 adap->fe[0] = dvb_attach(tda10023_attach, 888 &anysee_tda10023_tda18212_config, 889 &d->i2c_adap, 0x48); 890 891 /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */ 892 if (adap->fe[0]) 893 adap->fe[0]->ops.i2c_gate_ctrl = anysee_i2c_gate_ctrl; 894 895 /* break out if first frontend attaching fails */ 896 if (!adap->fe[0]) 897 break; 898 899 /* disable DVB-C demod on IOD[5] */ 900 ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 5), 0x20); 901 if (ret) 902 goto error; 903 904 /* enable DVB-T demod on IOD[6] */ 905 ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 6), 0x40); 906 if (ret) 907 goto error; 908 909 /* attach demod */ 910 adap->fe[1] = dvb_attach(zl10353_attach, 911 &anysee_zl10353_tda18212_config, 912 &d->i2c_adap); 913 914 /* I2C gate for DNOD44CDH086A(TDA18212) tuner module */ 915 if (adap->fe[1]) 916 adap->fe[1]->ops.i2c_gate_ctrl = anysee_i2c_gate_ctrl; 917 918 state->has_ci = true; 919 920 break; 921 case ANYSEE_HW_508S2: /* 19 */ 922 case ANYSEE_HW_508PS2: /* 22 */ 923 /* E7 S2 */ 924 /* E7 PS2 */ 925 926 /* enable DVB-S/S2 demod on IOE[5] */ 927 ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 5), 0x20); 928 if (ret) 929 goto error; 930 931 /* attach demod */ 932 adap->fe[0] = dvb_attach(stv0900_attach, 933 &anysee_stv0900_config, &d->i2c_adap, 0); 934 935 state->has_ci = true; 936 937 break; 938 case ANYSEE_HW_508T2C: /* 20 */ 939 /* E7 T2C */ 940 941 /* enable DVB-T/T2/C demod on IOE[5] */ 942 ret = anysee_wr_reg_mask(d, REG_IOE, (1 << 5), 0x20); 943 if (ret) 944 goto error; 945 946 /* attach demod */ 947 adap->fe[0] = dvb_attach(cxd2820r_attach, 948 &anysee_cxd2820r_config, &d->i2c_adap, NULL); 949 950 state->has_ci = true; 951 952 break; 953 } 954 955 if (!adap->fe[0]) { 956 /* we have no frontend :-( */ 957 ret = -ENODEV; 958 dev_err(&d->udev->dev, 959 "%s: Unsupported Anysee version. Please report to <linux-media@vger.kernel.org>.\n", 960 KBUILD_MODNAME); 961 } 962 error: 963 return ret; 964 } 965 966 static int anysee_tuner_attach(struct dvb_usb_adapter *adap) 967 { 968 struct anysee_state *state = adap_to_priv(adap); 969 struct dvb_usb_device *d = adap_to_d(adap); 970 struct dvb_frontend *fe; 971 int ret; 972 dev_dbg(&d->udev->dev, "%s:\n", __func__); 973 974 switch (state->hw) { 975 case ANYSEE_HW_507T: /* 2 */ 976 /* E30 */ 977 978 /* attach tuner */ 979 fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc2 >> 1), NULL, 980 DVB_PLL_THOMSON_DTT7579); 981 982 break; 983 case ANYSEE_HW_507CD: /* 6 */ 984 /* E30 Plus */ 985 986 /* attach tuner */ 987 fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc2 >> 1), 988 &d->i2c_adap, DVB_PLL_THOMSON_DTT7579); 989 990 break; 991 case ANYSEE_HW_507DC: /* 10 */ 992 /* E30 C Plus */ 993 994 /* attach tuner */ 995 fe = dvb_attach(dvb_pll_attach, adap->fe[0], (0xc0 >> 1), 996 &d->i2c_adap, DVB_PLL_SAMSUNG_DTOS403IH102A); 997 998 break; 999 case ANYSEE_HW_507SI: /* 11 */ 1000 /* E30 S2 Plus */ 1001 1002 /* attach LNB controller */ 1003 fe = dvb_attach(isl6423_attach, adap->fe[0], &d->i2c_adap, 1004 &anysee_isl6423_config); 1005 1006 break; 1007 case ANYSEE_HW_507FA: /* 15 */ 1008 /* E30 Combo Plus */ 1009 /* E30 C Plus */ 1010 1011 /* Try first attach TDA18212 silicon tuner on IOE[4], if that 1012 * fails attach old simple PLL. */ 1013 1014 /* attach tuner */ 1015 if (state->has_tda18212) { 1016 struct tda18212_config tda18212_config = 1017 anysee_tda18212_config; 1018 1019 tda18212_config.fe = adap->fe[0]; 1020 ret = anysee_add_i2c_dev(d, "tda18212", 0x60, 1021 &tda18212_config); 1022 if (ret) 1023 goto err; 1024 1025 /* copy tuner ops for 2nd FE as tuner is shared */ 1026 if (adap->fe[1]) { 1027 adap->fe[1]->tuner_priv = 1028 adap->fe[0]->tuner_priv; 1029 memcpy(&adap->fe[1]->ops.tuner_ops, 1030 &adap->fe[0]->ops.tuner_ops, 1031 sizeof(struct dvb_tuner_ops)); 1032 } 1033 1034 return 0; 1035 } else { 1036 /* attach tuner */ 1037 fe = dvb_attach(dvb_pll_attach, adap->fe[0], 1038 (0xc0 >> 1), &d->i2c_adap, 1039 DVB_PLL_SAMSUNG_DTOS403IH102A); 1040 1041 if (fe && adap->fe[1]) { 1042 /* attach tuner for 2nd FE */ 1043 fe = dvb_attach(dvb_pll_attach, adap->fe[1], 1044 (0xc0 >> 1), &d->i2c_adap, 1045 DVB_PLL_SAMSUNG_DTOS403IH102A); 1046 } 1047 } 1048 1049 break; 1050 case ANYSEE_HW_508TC: /* 18 */ 1051 case ANYSEE_HW_508PTC: /* 21 */ 1052 { 1053 /* E7 TC */ 1054 /* E7 PTC */ 1055 struct tda18212_config tda18212_config = anysee_tda18212_config; 1056 1057 tda18212_config.fe = adap->fe[0]; 1058 ret = anysee_add_i2c_dev(d, "tda18212", 0x60, &tda18212_config); 1059 if (ret) 1060 goto err; 1061 1062 /* copy tuner ops for 2nd FE as tuner is shared */ 1063 if (adap->fe[1]) { 1064 adap->fe[1]->tuner_priv = adap->fe[0]->tuner_priv; 1065 memcpy(&adap->fe[1]->ops.tuner_ops, 1066 &adap->fe[0]->ops.tuner_ops, 1067 sizeof(struct dvb_tuner_ops)); 1068 } 1069 1070 return 0; 1071 } 1072 case ANYSEE_HW_508S2: /* 19 */ 1073 case ANYSEE_HW_508PS2: /* 22 */ 1074 /* E7 S2 */ 1075 /* E7 PS2 */ 1076 1077 /* attach tuner */ 1078 fe = dvb_attach(stv6110_attach, adap->fe[0], 1079 &anysee_stv6110_config, &d->i2c_adap); 1080 1081 if (fe) { 1082 /* attach LNB controller */ 1083 fe = dvb_attach(isl6423_attach, adap->fe[0], 1084 &d->i2c_adap, &anysee_isl6423_config); 1085 } 1086 1087 break; 1088 1089 case ANYSEE_HW_508T2C: /* 20 */ 1090 { 1091 /* E7 T2C */ 1092 struct tda18212_config tda18212_config = 1093 anysee_tda18212_config2; 1094 1095 tda18212_config.fe = adap->fe[0]; 1096 ret = anysee_add_i2c_dev(d, "tda18212", 0x60, &tda18212_config); 1097 if (ret) 1098 goto err; 1099 1100 return 0; 1101 } 1102 default: 1103 fe = NULL; 1104 } 1105 1106 if (fe) 1107 ret = 0; 1108 else 1109 ret = -ENODEV; 1110 err: 1111 return ret; 1112 } 1113 1114 #if IS_ENABLED(CONFIG_RC_CORE) 1115 static int anysee_rc_query(struct dvb_usb_device *d) 1116 { 1117 u8 buf[] = {CMD_GET_IR_CODE}; 1118 u8 ircode[2]; 1119 int ret; 1120 1121 /* Remote controller is basic NEC using address byte 0x08. 1122 Anysee device RC query returns only two bytes, status and code, 1123 address byte is dropped. Also it does not return any value for 1124 NEC RCs having address byte other than 0x08. Due to that, we 1125 cannot use that device as standard NEC receiver. 1126 It could be possible make hack which reads whole code directly 1127 from device memory... */ 1128 1129 ret = anysee_ctrl_msg(d, buf, sizeof(buf), ircode, sizeof(ircode)); 1130 if (ret) 1131 return ret; 1132 1133 if (ircode[0]) { 1134 dev_dbg(&d->udev->dev, "%s: key pressed %02x\n", __func__, 1135 ircode[1]); 1136 rc_keydown(d->rc_dev, RC_PROTO_NEC, 1137 RC_SCANCODE_NEC(0x08, ircode[1]), 0); 1138 } 1139 1140 return 0; 1141 } 1142 1143 static int anysee_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) 1144 { 1145 rc->allowed_protos = RC_PROTO_BIT_NEC; 1146 rc->query = anysee_rc_query; 1147 rc->interval = 250; /* windows driver uses 500ms */ 1148 1149 return 0; 1150 } 1151 #else 1152 #define anysee_get_rc_config NULL 1153 #endif 1154 1155 static int anysee_ci_read_attribute_mem(struct dvb_ca_en50221 *ci, int slot, 1156 int addr) 1157 { 1158 struct dvb_usb_device *d = ci->data; 1159 int ret; 1160 u8 buf[] = {CMD_CI, 0x02, 0x40 | addr >> 8, addr & 0xff, 0x00, 1}; 1161 u8 val; 1162 1163 ret = anysee_ctrl_msg(d, buf, sizeof(buf), &val, 1); 1164 if (ret) 1165 return ret; 1166 1167 return val; 1168 } 1169 1170 static int anysee_ci_write_attribute_mem(struct dvb_ca_en50221 *ci, int slot, 1171 int addr, u8 val) 1172 { 1173 struct dvb_usb_device *d = ci->data; 1174 int ret; 1175 u8 buf[] = {CMD_CI, 0x03, 0x40 | addr >> 8, addr & 0xff, 0x00, 1, val}; 1176 1177 ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); 1178 if (ret) 1179 return ret; 1180 1181 return 0; 1182 } 1183 1184 static int anysee_ci_read_cam_control(struct dvb_ca_en50221 *ci, int slot, 1185 u8 addr) 1186 { 1187 struct dvb_usb_device *d = ci->data; 1188 int ret; 1189 u8 buf[] = {CMD_CI, 0x04, 0x40, addr, 0x00, 1}; 1190 u8 val; 1191 1192 ret = anysee_ctrl_msg(d, buf, sizeof(buf), &val, 1); 1193 if (ret) 1194 return ret; 1195 1196 return val; 1197 } 1198 1199 static int anysee_ci_write_cam_control(struct dvb_ca_en50221 *ci, int slot, 1200 u8 addr, u8 val) 1201 { 1202 struct dvb_usb_device *d = ci->data; 1203 int ret; 1204 u8 buf[] = {CMD_CI, 0x05, 0x40, addr, 0x00, 1, val}; 1205 1206 ret = anysee_ctrl_msg(d, buf, sizeof(buf), NULL, 0); 1207 if (ret) 1208 return ret; 1209 1210 return 0; 1211 } 1212 1213 static int anysee_ci_slot_reset(struct dvb_ca_en50221 *ci, int slot) 1214 { 1215 struct dvb_usb_device *d = ci->data; 1216 int ret; 1217 struct anysee_state *state = d_to_priv(d); 1218 1219 state->ci_cam_ready = jiffies + msecs_to_jiffies(1000); 1220 1221 ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80); 1222 if (ret) 1223 return ret; 1224 1225 msleep(300); 1226 1227 ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80); 1228 if (ret) 1229 return ret; 1230 1231 return 0; 1232 } 1233 1234 static int anysee_ci_slot_shutdown(struct dvb_ca_en50221 *ci, int slot) 1235 { 1236 struct dvb_usb_device *d = ci->data; 1237 int ret; 1238 1239 ret = anysee_wr_reg_mask(d, REG_IOA, (0 << 7), 0x80); 1240 if (ret) 1241 return ret; 1242 1243 msleep(30); 1244 1245 ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80); 1246 if (ret) 1247 return ret; 1248 1249 return 0; 1250 } 1251 1252 static int anysee_ci_slot_ts_enable(struct dvb_ca_en50221 *ci, int slot) 1253 { 1254 struct dvb_usb_device *d = ci->data; 1255 int ret; 1256 1257 ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 1), 0x02); 1258 if (ret) 1259 return ret; 1260 1261 return 0; 1262 } 1263 1264 static int anysee_ci_poll_slot_status(struct dvb_ca_en50221 *ci, int slot, 1265 int open) 1266 { 1267 struct dvb_usb_device *d = ci->data; 1268 struct anysee_state *state = d_to_priv(d); 1269 int ret; 1270 u8 tmp = 0; 1271 1272 ret = anysee_rd_reg_mask(d, REG_IOC, &tmp, 0x40); 1273 if (ret) 1274 return ret; 1275 1276 if (tmp == 0) { 1277 ret = DVB_CA_EN50221_POLL_CAM_PRESENT; 1278 if (time_after(jiffies, state->ci_cam_ready)) 1279 ret |= DVB_CA_EN50221_POLL_CAM_READY; 1280 } 1281 1282 return ret; 1283 } 1284 1285 static int anysee_ci_init(struct dvb_usb_device *d) 1286 { 1287 struct anysee_state *state = d_to_priv(d); 1288 int ret; 1289 1290 state->ci.owner = THIS_MODULE; 1291 state->ci.read_attribute_mem = anysee_ci_read_attribute_mem; 1292 state->ci.write_attribute_mem = anysee_ci_write_attribute_mem; 1293 state->ci.read_cam_control = anysee_ci_read_cam_control; 1294 state->ci.write_cam_control = anysee_ci_write_cam_control; 1295 state->ci.slot_reset = anysee_ci_slot_reset; 1296 state->ci.slot_shutdown = anysee_ci_slot_shutdown; 1297 state->ci.slot_ts_enable = anysee_ci_slot_ts_enable; 1298 state->ci.poll_slot_status = anysee_ci_poll_slot_status; 1299 state->ci.data = d; 1300 1301 ret = anysee_wr_reg_mask(d, REG_IOA, (1 << 7), 0x80); 1302 if (ret) 1303 return ret; 1304 1305 ret = anysee_wr_reg_mask(d, REG_IOD, (0 << 2)|(0 << 1)|(0 << 0), 0x07); 1306 if (ret) 1307 return ret; 1308 1309 ret = anysee_wr_reg_mask(d, REG_IOD, (1 << 2)|(1 << 1)|(1 << 0), 0x07); 1310 if (ret) 1311 return ret; 1312 1313 ret = dvb_ca_en50221_init(&d->adapter[0].dvb_adap, &state->ci, 0, 1); 1314 if (ret) 1315 return ret; 1316 1317 state->ci_attached = true; 1318 1319 return 0; 1320 } 1321 1322 static void anysee_ci_release(struct dvb_usb_device *d) 1323 { 1324 struct anysee_state *state = d_to_priv(d); 1325 1326 /* detach CI */ 1327 if (state->ci_attached) 1328 dvb_ca_en50221_release(&state->ci); 1329 1330 return; 1331 } 1332 1333 static int anysee_init(struct dvb_usb_device *d) 1334 { 1335 struct anysee_state *state = d_to_priv(d); 1336 int ret; 1337 1338 /* There is one interface with two alternate settings. 1339 Alternate setting 0 is for bulk transfer. 1340 Alternate setting 1 is for isochronous transfer. 1341 We use bulk transfer (alternate setting 0). */ 1342 ret = usb_set_interface(d->udev, 0, 0); 1343 if (ret) 1344 return ret; 1345 1346 /* LED light */ 1347 ret = anysee_led_ctrl(d, 0x01, 0x03); 1348 if (ret) 1349 return ret; 1350 1351 /* enable IR */ 1352 ret = anysee_ir_ctrl(d, 1); 1353 if (ret) 1354 return ret; 1355 1356 /* attach CI */ 1357 if (state->has_ci) { 1358 ret = anysee_ci_init(d); 1359 if (ret) 1360 return ret; 1361 } 1362 1363 return 0; 1364 } 1365 1366 static void anysee_exit(struct dvb_usb_device *d) 1367 { 1368 struct anysee_state *state = d_to_priv(d); 1369 1370 if (state->i2c_client[0]) 1371 anysee_del_i2c_dev(d); 1372 1373 return anysee_ci_release(d); 1374 } 1375 1376 /* DVB USB Driver stuff */ 1377 static struct dvb_usb_device_properties anysee_props = { 1378 .driver_name = KBUILD_MODNAME, 1379 .owner = THIS_MODULE, 1380 .adapter_nr = adapter_nr, 1381 .size_of_priv = sizeof(struct anysee_state), 1382 1383 .generic_bulk_ctrl_endpoint = 0x01, 1384 .generic_bulk_ctrl_endpoint_response = 0x81, 1385 1386 .i2c_algo = &anysee_i2c_algo, 1387 .read_config = anysee_read_config, 1388 .frontend_attach = anysee_frontend_attach, 1389 .tuner_attach = anysee_tuner_attach, 1390 .init = anysee_init, 1391 .get_rc_config = anysee_get_rc_config, 1392 .frontend_ctrl = anysee_frontend_ctrl, 1393 .streaming_ctrl = anysee_streaming_ctrl, 1394 .exit = anysee_exit, 1395 1396 .num_adapters = 1, 1397 .adapter = { 1398 { 1399 .stream = DVB_USB_STREAM_BULK(0x82, 8, 16 * 512), 1400 } 1401 } 1402 }; 1403 1404 static const struct usb_device_id anysee_id_table[] = { 1405 { DVB_USB_DEVICE(USB_VID_CYPRESS, USB_PID_ANYSEE, 1406 &anysee_props, "Anysee", RC_MAP_ANYSEE) }, 1407 { DVB_USB_DEVICE(USB_VID_AMT, USB_PID_ANYSEE, 1408 &anysee_props, "Anysee", RC_MAP_ANYSEE) }, 1409 { } 1410 }; 1411 MODULE_DEVICE_TABLE(usb, anysee_id_table); 1412 1413 static struct usb_driver anysee_usb_driver = { 1414 .name = KBUILD_MODNAME, 1415 .id_table = anysee_id_table, 1416 .probe = dvb_usbv2_probe, 1417 .disconnect = dvb_usbv2_disconnect, 1418 .suspend = dvb_usbv2_suspend, 1419 .resume = dvb_usbv2_resume, 1420 .reset_resume = dvb_usbv2_reset_resume, 1421 .no_dynamic_id = 1, 1422 .soft_unbind = 1, 1423 }; 1424 1425 module_usb_driver(anysee_usb_driver); 1426 1427 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); 1428 MODULE_DESCRIPTION("Driver Anysee E30 DVB-C & DVB-T USB2.0"); 1429 MODULE_LICENSE("GPL"); 1430