1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Afatech AF9035 DVB USB driver 4 * 5 * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> 6 * Copyright (C) 2012 Antti Palosaari <crope@iki.fi> 7 */ 8 9 #include "af9035.h" 10 11 /* Max transfer size done by I2C transfer functions */ 12 #define MAX_XFER_SIZE 64 13 14 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); 15 16 static u16 af9035_checksum(const u8 *buf, size_t len) 17 { 18 size_t i; 19 u16 checksum = 0; 20 21 for (i = 1; i < len; i++) { 22 if (i % 2) 23 checksum += buf[i] << 8; 24 else 25 checksum += buf[i]; 26 } 27 checksum = ~checksum; 28 29 return checksum; 30 } 31 32 static int af9035_ctrl_msg(struct dvb_usb_device *d, struct usb_req *req) 33 { 34 #define REQ_HDR_LEN 4 /* send header size */ 35 #define ACK_HDR_LEN 3 /* rece header size */ 36 #define CHECKSUM_LEN 2 37 #define USB_TIMEOUT 2000 38 struct state *state = d_to_priv(d); 39 struct usb_interface *intf = d->intf; 40 int ret, wlen, rlen; 41 u16 checksum, tmp_checksum; 42 43 mutex_lock(&d->usb_mutex); 44 45 /* buffer overflow check */ 46 if (req->wlen > (BUF_LEN - REQ_HDR_LEN - CHECKSUM_LEN) || 47 req->rlen > (BUF_LEN - ACK_HDR_LEN - CHECKSUM_LEN)) { 48 dev_err(&intf->dev, "too much data wlen=%d rlen=%d\n", 49 req->wlen, req->rlen); 50 ret = -EINVAL; 51 goto exit; 52 } 53 54 state->buf[0] = REQ_HDR_LEN + req->wlen + CHECKSUM_LEN - 1; 55 state->buf[1] = req->mbox; 56 state->buf[2] = req->cmd; 57 state->buf[3] = state->seq++; 58 memcpy(&state->buf[REQ_HDR_LEN], req->wbuf, req->wlen); 59 60 wlen = REQ_HDR_LEN + req->wlen + CHECKSUM_LEN; 61 rlen = ACK_HDR_LEN + req->rlen + CHECKSUM_LEN; 62 63 /* calc and add checksum */ 64 checksum = af9035_checksum(state->buf, state->buf[0] - 1); 65 state->buf[state->buf[0] - 1] = (checksum >> 8); 66 state->buf[state->buf[0] - 0] = (checksum & 0xff); 67 68 /* no ack for these packets */ 69 if (req->cmd == CMD_FW_DL) 70 rlen = 0; 71 72 ret = dvb_usbv2_generic_rw_locked(d, 73 state->buf, wlen, state->buf, rlen); 74 if (ret) 75 goto exit; 76 77 /* no ack for those packets */ 78 if (req->cmd == CMD_FW_DL) 79 goto exit; 80 81 /* verify checksum */ 82 checksum = af9035_checksum(state->buf, rlen - 2); 83 tmp_checksum = (state->buf[rlen - 2] << 8) | state->buf[rlen - 1]; 84 if (tmp_checksum != checksum) { 85 dev_err(&intf->dev, "command=%02x checksum mismatch (%04x != %04x)\n", 86 req->cmd, tmp_checksum, checksum); 87 ret = -EIO; 88 goto exit; 89 } 90 91 /* check status */ 92 if (state->buf[2]) { 93 /* fw returns status 1 when IR code was not received */ 94 if (req->cmd == CMD_IR_GET || state->buf[2] == 1) { 95 ret = 1; 96 goto exit; 97 } 98 99 dev_dbg(&intf->dev, "command=%02x failed fw error=%d\n", 100 req->cmd, state->buf[2]); 101 ret = -EIO; 102 goto exit; 103 } 104 105 /* read request, copy returned data to return buf */ 106 if (req->rlen) 107 memcpy(req->rbuf, &state->buf[ACK_HDR_LEN], req->rlen); 108 exit: 109 mutex_unlock(&d->usb_mutex); 110 return ret; 111 } 112 113 /* write multiple registers */ 114 static int af9035_wr_regs(struct dvb_usb_device *d, u32 reg, u8 *val, int len) 115 { 116 struct usb_interface *intf = d->intf; 117 u8 wbuf[MAX_XFER_SIZE]; 118 u8 mbox = (reg >> 16) & 0xff; 119 struct usb_req req = { CMD_MEM_WR, mbox, 6 + len, wbuf, 0, NULL }; 120 121 if (6 + len > sizeof(wbuf)) { 122 dev_warn(&intf->dev, "i2c wr: len=%d is too big!\n", len); 123 return -EOPNOTSUPP; 124 } 125 126 wbuf[0] = len; 127 wbuf[1] = 2; 128 wbuf[2] = 0; 129 wbuf[3] = 0; 130 wbuf[4] = (reg >> 8) & 0xff; 131 wbuf[5] = (reg >> 0) & 0xff; 132 memcpy(&wbuf[6], val, len); 133 134 return af9035_ctrl_msg(d, &req); 135 } 136 137 /* read multiple registers */ 138 static int af9035_rd_regs(struct dvb_usb_device *d, u32 reg, u8 *val, int len) 139 { 140 u8 wbuf[] = { len, 2, 0, 0, (reg >> 8) & 0xff, reg & 0xff }; 141 u8 mbox = (reg >> 16) & 0xff; 142 struct usb_req req = { CMD_MEM_RD, mbox, sizeof(wbuf), wbuf, len, val }; 143 144 return af9035_ctrl_msg(d, &req); 145 } 146 147 /* write single register */ 148 static int af9035_wr_reg(struct dvb_usb_device *d, u32 reg, u8 val) 149 { 150 return af9035_wr_regs(d, reg, &val, 1); 151 } 152 153 /* read single register */ 154 static int af9035_rd_reg(struct dvb_usb_device *d, u32 reg, u8 *val) 155 { 156 return af9035_rd_regs(d, reg, val, 1); 157 } 158 159 /* write single register with mask */ 160 static int af9035_wr_reg_mask(struct dvb_usb_device *d, u32 reg, u8 val, 161 u8 mask) 162 { 163 int ret; 164 u8 tmp; 165 166 /* no need for read if whole reg is written */ 167 if (mask != 0xff) { 168 ret = af9035_rd_regs(d, reg, &tmp, 1); 169 if (ret) 170 return ret; 171 172 val &= mask; 173 tmp &= ~mask; 174 val |= tmp; 175 } 176 177 return af9035_wr_regs(d, reg, &val, 1); 178 } 179 180 static int af9035_add_i2c_dev(struct dvb_usb_device *d, const char *type, 181 u8 addr, void *platform_data, struct i2c_adapter *adapter) 182 { 183 int ret, num; 184 struct state *state = d_to_priv(d); 185 struct usb_interface *intf = d->intf; 186 struct i2c_client *client; 187 struct i2c_board_info board_info = { 188 .addr = addr, 189 .platform_data = platform_data, 190 }; 191 192 strscpy(board_info.type, type, I2C_NAME_SIZE); 193 194 /* find first free client */ 195 for (num = 0; num < AF9035_I2C_CLIENT_MAX; num++) { 196 if (state->i2c_client[num] == NULL) 197 break; 198 } 199 200 dev_dbg(&intf->dev, "num=%d\n", num); 201 202 if (num == AF9035_I2C_CLIENT_MAX) { 203 dev_err(&intf->dev, "I2C client out of index\n"); 204 ret = -ENODEV; 205 goto err; 206 } 207 208 request_module("%s", board_info.type); 209 210 /* register I2C device */ 211 client = i2c_new_client_device(adapter, &board_info); 212 if (!i2c_client_has_driver(client)) { 213 dev_err(&intf->dev, "failed to bind i2c device to %s driver\n", type); 214 ret = -ENODEV; 215 goto err; 216 } 217 218 /* increase I2C driver usage count */ 219 if (!try_module_get(client->dev.driver->owner)) { 220 i2c_unregister_device(client); 221 ret = -ENODEV; 222 goto err; 223 } 224 225 state->i2c_client[num] = client; 226 return 0; 227 err: 228 dev_dbg(&intf->dev, "failed=%d\n", ret); 229 return ret; 230 } 231 232 static void af9035_del_i2c_dev(struct dvb_usb_device *d) 233 { 234 int num; 235 struct state *state = d_to_priv(d); 236 struct usb_interface *intf = d->intf; 237 struct i2c_client *client; 238 239 /* find last used client */ 240 num = AF9035_I2C_CLIENT_MAX; 241 while (num--) { 242 if (state->i2c_client[num] != NULL) 243 break; 244 } 245 246 dev_dbg(&intf->dev, "num=%d\n", num); 247 248 if (num == -1) { 249 dev_err(&intf->dev, "I2C client out of index\n"); 250 goto err; 251 } 252 253 client = state->i2c_client[num]; 254 255 /* decrease I2C driver usage count */ 256 module_put(client->dev.driver->owner); 257 258 /* unregister I2C device */ 259 i2c_unregister_device(client); 260 261 state->i2c_client[num] = NULL; 262 return; 263 err: 264 dev_dbg(&intf->dev, "failed\n"); 265 } 266 267 static int af9035_i2c_master_xfer(struct i2c_adapter *adap, 268 struct i2c_msg msg[], int num) 269 { 270 struct dvb_usb_device *d = i2c_get_adapdata(adap); 271 struct state *state = d_to_priv(d); 272 int ret; 273 274 if (mutex_lock_interruptible(&d->i2c_mutex) < 0) 275 return -EAGAIN; 276 277 /* 278 * AF9035 I2C sub header is 5 bytes long. Meaning of those bytes are: 279 * 0: data len 280 * 1: I2C addr << 1 281 * 2: reg addr len 282 * byte 3 and 4 can be used as reg addr 283 * 3: reg addr MSB 284 * used when reg addr len is set to 2 285 * 4: reg addr LSB 286 * used when reg addr len is set to 1 or 2 287 * 288 * For the simplify we do not use register addr at all. 289 * NOTE: As a firmware knows tuner type there is very small possibility 290 * there could be some tuner I2C hacks done by firmware and this may 291 * lead problems if firmware expects those bytes are used. 292 * 293 * TODO: Here is few hacks. AF9035 chip integrates AF9033 demodulator. 294 * IT9135 chip integrates AF9033 demodulator and RF tuner. For dual 295 * tuner devices, there is also external AF9033 demodulator connected 296 * via external I2C bus. All AF9033 demod I2C traffic, both single and 297 * dual tuner configuration, is covered by firmware - actual USB IO 298 * looks just like a memory access. 299 * In case of IT913x chip, there is own tuner driver. It is implemented 300 * currently as a I2C driver, even tuner IP block is likely build 301 * directly into the demodulator memory space and there is no own I2C 302 * bus. I2C subsystem does not allow register multiple devices to same 303 * bus, having same slave address. Due to that we reuse demod address, 304 * shifted by one bit, on that case. 305 * 306 * For IT930x we use a different command and the sub header is 307 * different as well: 308 * 0: data len 309 * 1: I2C bus (0x03 seems to be only value used) 310 * 2: I2C addr << 1 311 */ 312 #define AF9035_IS_I2C_XFER_WRITE_READ(_msg, _num) \ 313 (_num == 2 && !(_msg[0].flags & I2C_M_RD) && (_msg[1].flags & I2C_M_RD)) 314 #define AF9035_IS_I2C_XFER_WRITE(_msg, _num) \ 315 (_num == 1 && !(_msg[0].flags & I2C_M_RD)) 316 #define AF9035_IS_I2C_XFER_READ(_msg, _num) \ 317 (_num == 1 && (_msg[0].flags & I2C_M_RD)) 318 319 if (AF9035_IS_I2C_XFER_WRITE_READ(msg, num)) { 320 if (msg[0].len > 40 || msg[1].len > 40) { 321 /* TODO: correct limits > 40 */ 322 ret = -EOPNOTSUPP; 323 } else if ((msg[0].addr == state->af9033_i2c_addr[0]) || 324 (msg[0].addr == state->af9033_i2c_addr[1])) { 325 if (msg[0].len < 3 || msg[1].len < 1) 326 return -EOPNOTSUPP; 327 /* demod access via firmware interface */ 328 u32 reg = msg[0].buf[0] << 16 | msg[0].buf[1] << 8 | 329 msg[0].buf[2]; 330 331 if (msg[0].addr == state->af9033_i2c_addr[1]) 332 reg |= 0x100000; 333 334 ret = af9035_rd_regs(d, reg, &msg[1].buf[0], 335 msg[1].len); 336 } else if (state->no_read) { 337 memset(msg[1].buf, 0, msg[1].len); 338 ret = 0; 339 } else { 340 /* I2C write + read */ 341 u8 buf[MAX_XFER_SIZE]; 342 struct usb_req req = { CMD_I2C_RD, 0, 5 + msg[0].len, 343 buf, msg[1].len, msg[1].buf }; 344 345 if (state->chip_type == 0x9306) { 346 req.cmd = CMD_GENERIC_I2C_RD; 347 req.wlen = 3 + msg[0].len; 348 } 349 req.mbox |= ((msg[0].addr & 0x80) >> 3); 350 351 buf[0] = msg[1].len; 352 if (state->chip_type == 0x9306) { 353 buf[1] = 0x03; /* I2C bus */ 354 buf[2] = msg[0].addr << 1; 355 memcpy(&buf[3], msg[0].buf, msg[0].len); 356 } else { 357 buf[1] = msg[0].addr << 1; 358 buf[3] = 0x00; /* reg addr MSB */ 359 buf[4] = 0x00; /* reg addr LSB */ 360 361 /* Keep prev behavior for write req len > 2*/ 362 if (msg[0].len > 2) { 363 buf[2] = 0x00; /* reg addr len */ 364 memcpy(&buf[5], msg[0].buf, msg[0].len); 365 366 /* Use reg addr fields if write req len <= 2 */ 367 } else { 368 req.wlen = 5; 369 buf[2] = msg[0].len; 370 if (msg[0].len == 2) { 371 buf[3] = msg[0].buf[0]; 372 buf[4] = msg[0].buf[1]; 373 } else if (msg[0].len == 1) { 374 buf[4] = msg[0].buf[0]; 375 } 376 } 377 } 378 ret = af9035_ctrl_msg(d, &req); 379 } 380 } else if (AF9035_IS_I2C_XFER_WRITE(msg, num)) { 381 if (msg[0].len > 40) { 382 /* TODO: correct limits > 40 */ 383 ret = -EOPNOTSUPP; 384 } else if ((msg[0].addr == state->af9033_i2c_addr[0]) || 385 (msg[0].addr == state->af9033_i2c_addr[1])) { 386 if (msg[0].len < 3) 387 return -EOPNOTSUPP; 388 /* demod access via firmware interface */ 389 u32 reg = msg[0].buf[0] << 16 | msg[0].buf[1] << 8 | 390 msg[0].buf[2]; 391 392 if (msg[0].addr == state->af9033_i2c_addr[1]) 393 reg |= 0x100000; 394 395 ret = af9035_wr_regs(d, reg, &msg[0].buf[3], msg[0].len - 3); 396 } else { 397 /* I2C write */ 398 u8 buf[MAX_XFER_SIZE]; 399 struct usb_req req = { CMD_I2C_WR, 0, 5 + msg[0].len, 400 buf, 0, NULL }; 401 402 if (state->chip_type == 0x9306) { 403 req.cmd = CMD_GENERIC_I2C_WR; 404 req.wlen = 3 + msg[0].len; 405 } 406 407 req.mbox |= ((msg[0].addr & 0x80) >> 3); 408 buf[0] = msg[0].len; 409 if (state->chip_type == 0x9306) { 410 buf[1] = 0x03; /* I2C bus */ 411 buf[2] = msg[0].addr << 1; 412 memcpy(&buf[3], msg[0].buf, msg[0].len); 413 } else { 414 buf[1] = msg[0].addr << 1; 415 buf[2] = 0x00; /* reg addr len */ 416 buf[3] = 0x00; /* reg addr MSB */ 417 buf[4] = 0x00; /* reg addr LSB */ 418 memcpy(&buf[5], msg[0].buf, msg[0].len); 419 } 420 ret = af9035_ctrl_msg(d, &req); 421 } 422 } else if (AF9035_IS_I2C_XFER_READ(msg, num)) { 423 if (msg[0].len > 40) { 424 /* TODO: correct limits > 40 */ 425 ret = -EOPNOTSUPP; 426 } else if (state->no_read) { 427 memset(msg[0].buf, 0, msg[0].len); 428 ret = 0; 429 } else { 430 /* I2C read */ 431 u8 buf[5]; 432 struct usb_req req = { CMD_I2C_RD, 0, sizeof(buf), 433 buf, msg[0].len, msg[0].buf }; 434 435 if (state->chip_type == 0x9306) { 436 req.cmd = CMD_GENERIC_I2C_RD; 437 req.wlen = 3; 438 } 439 req.mbox |= ((msg[0].addr & 0x80) >> 3); 440 buf[0] = msg[0].len; 441 if (state->chip_type == 0x9306) { 442 buf[1] = 0x03; /* I2C bus */ 443 buf[2] = msg[0].addr << 1; 444 } else { 445 buf[1] = msg[0].addr << 1; 446 buf[2] = 0x00; /* reg addr len */ 447 buf[3] = 0x00; /* reg addr MSB */ 448 buf[4] = 0x00; /* reg addr LSB */ 449 } 450 ret = af9035_ctrl_msg(d, &req); 451 } 452 } else { 453 /* 454 * We support only three kind of I2C transactions: 455 * 1) 1 x write + 1 x read (repeated start) 456 * 2) 1 x write 457 * 3) 1 x read 458 */ 459 ret = -EOPNOTSUPP; 460 } 461 462 mutex_unlock(&d->i2c_mutex); 463 464 if (ret < 0) 465 return ret; 466 else 467 return num; 468 } 469 470 static u32 af9035_i2c_functionality(struct i2c_adapter *adapter) 471 { 472 return I2C_FUNC_I2C; 473 } 474 475 static struct i2c_algorithm af9035_i2c_algo = { 476 .master_xfer = af9035_i2c_master_xfer, 477 .functionality = af9035_i2c_functionality, 478 }; 479 480 static int af9035_identify_state(struct dvb_usb_device *d, const char **name) 481 { 482 struct state *state = d_to_priv(d); 483 struct usb_interface *intf = d->intf; 484 int ret, i, ts_mode_invalid; 485 unsigned int utmp, eeprom_addr; 486 u8 tmp; 487 u8 wbuf[1] = { 1 }; 488 u8 rbuf[4]; 489 struct usb_req req = { CMD_FW_QUERYINFO, 0, sizeof(wbuf), wbuf, 490 sizeof(rbuf), rbuf }; 491 492 ret = af9035_rd_regs(d, 0x1222, rbuf, 3); 493 if (ret < 0) 494 goto err; 495 496 state->chip_version = rbuf[0]; 497 state->chip_type = rbuf[2] << 8 | rbuf[1] << 0; 498 499 ret = af9035_rd_reg(d, 0x384f, &state->prechip_version); 500 if (ret < 0) 501 goto err; 502 503 dev_info(&intf->dev, "prechip_version=%02x chip_version=%02x chip_type=%04x\n", 504 state->prechip_version, state->chip_version, state->chip_type); 505 506 if (state->chip_type == 0x9135) { 507 if (state->chip_version == 0x02) { 508 *name = AF9035_FIRMWARE_IT9135_V2; 509 utmp = 0x00461d; 510 } else { 511 *name = AF9035_FIRMWARE_IT9135_V1; 512 utmp = 0x00461b; 513 } 514 515 /* Check if eeprom exists */ 516 ret = af9035_rd_reg(d, utmp, &tmp); 517 if (ret < 0) 518 goto err; 519 520 if (tmp == 0x00) { 521 dev_dbg(&intf->dev, "no eeprom\n"); 522 state->no_eeprom = true; 523 goto check_firmware_status; 524 } 525 526 eeprom_addr = EEPROM_BASE_IT9135; 527 } else if (state->chip_type == 0x9306) { 528 *name = AF9035_FIRMWARE_IT9303; 529 state->no_eeprom = true; 530 goto check_firmware_status; 531 } else { 532 *name = AF9035_FIRMWARE_AF9035; 533 eeprom_addr = EEPROM_BASE_AF9035; 534 } 535 536 /* Read and store eeprom */ 537 for (i = 0; i < 256; i += 32) { 538 ret = af9035_rd_regs(d, eeprom_addr + i, &state->eeprom[i], 32); 539 if (ret < 0) 540 goto err; 541 } 542 543 dev_dbg(&intf->dev, "eeprom dump:\n"); 544 for (i = 0; i < 256; i += 16) 545 dev_dbg(&intf->dev, "%*ph\n", 16, &state->eeprom[i]); 546 547 /* check for dual tuner mode */ 548 tmp = state->eeprom[EEPROM_TS_MODE]; 549 ts_mode_invalid = 0; 550 switch (tmp) { 551 case 0: 552 break; 553 case 1: 554 case 3: 555 state->dual_mode = true; 556 break; 557 case 5: 558 if (state->chip_type != 0x9135 && state->chip_type != 0x9306) 559 state->dual_mode = true; /* AF9035 */ 560 else 561 ts_mode_invalid = 1; 562 break; 563 default: 564 ts_mode_invalid = 1; 565 } 566 567 dev_dbg(&intf->dev, "ts mode=%d dual mode=%d\n", tmp, state->dual_mode); 568 569 if (ts_mode_invalid) 570 dev_info(&intf->dev, "ts mode=%d not supported, defaulting to single tuner mode!", tmp); 571 572 check_firmware_status: 573 ret = af9035_ctrl_msg(d, &req); 574 if (ret < 0) 575 goto err; 576 577 dev_dbg(&intf->dev, "reply=%*ph\n", 4, rbuf); 578 if (rbuf[0] || rbuf[1] || rbuf[2] || rbuf[3]) 579 ret = WARM; 580 else 581 ret = COLD; 582 583 return ret; 584 585 err: 586 dev_dbg(&intf->dev, "failed=%d\n", ret); 587 588 return ret; 589 } 590 591 static int af9035_download_firmware_old(struct dvb_usb_device *d, 592 const struct firmware *fw) 593 { 594 struct usb_interface *intf = d->intf; 595 int ret, i, j, len; 596 u8 wbuf[1]; 597 struct usb_req req = { 0, 0, 0, NULL, 0, NULL }; 598 struct usb_req req_fw_dl = { CMD_FW_DL, 0, 0, wbuf, 0, NULL }; 599 u8 hdr_core; 600 u16 hdr_addr, hdr_data_len, hdr_checksum; 601 #define MAX_DATA 58 602 #define HDR_SIZE 7 603 604 /* 605 * Thanks to Daniel Glöckner <daniel-gl@gmx.net> about that info! 606 * 607 * byte 0: MCS 51 core 608 * There are two inside the AF9035 (1=Link and 2=OFDM) with separate 609 * address spaces 610 * byte 1-2: Big endian destination address 611 * byte 3-4: Big endian number of data bytes following the header 612 * byte 5-6: Big endian header checksum, apparently ignored by the chip 613 * Calculated as ~(h[0]*256+h[1]+h[2]*256+h[3]+h[4]*256) 614 */ 615 616 for (i = fw->size; i > HDR_SIZE;) { 617 hdr_core = fw->data[fw->size - i + 0]; 618 hdr_addr = fw->data[fw->size - i + 1] << 8; 619 hdr_addr |= fw->data[fw->size - i + 2] << 0; 620 hdr_data_len = fw->data[fw->size - i + 3] << 8; 621 hdr_data_len |= fw->data[fw->size - i + 4] << 0; 622 hdr_checksum = fw->data[fw->size - i + 5] << 8; 623 hdr_checksum |= fw->data[fw->size - i + 6] << 0; 624 625 dev_dbg(&intf->dev, "core=%d addr=%04x data_len=%d checksum=%04x\n", 626 hdr_core, hdr_addr, hdr_data_len, hdr_checksum); 627 628 if (((hdr_core != 1) && (hdr_core != 2)) || 629 (hdr_data_len > i)) { 630 dev_dbg(&intf->dev, "bad firmware\n"); 631 break; 632 } 633 634 /* download begin packet */ 635 req.cmd = CMD_FW_DL_BEGIN; 636 ret = af9035_ctrl_msg(d, &req); 637 if (ret < 0) 638 goto err; 639 640 /* download firmware packet(s) */ 641 for (j = HDR_SIZE + hdr_data_len; j > 0; j -= MAX_DATA) { 642 len = j; 643 if (len > MAX_DATA) 644 len = MAX_DATA; 645 req_fw_dl.wlen = len; 646 req_fw_dl.wbuf = (u8 *) &fw->data[fw->size - i + 647 HDR_SIZE + hdr_data_len - j]; 648 ret = af9035_ctrl_msg(d, &req_fw_dl); 649 if (ret < 0) 650 goto err; 651 } 652 653 /* download end packet */ 654 req.cmd = CMD_FW_DL_END; 655 ret = af9035_ctrl_msg(d, &req); 656 if (ret < 0) 657 goto err; 658 659 i -= hdr_data_len + HDR_SIZE; 660 661 dev_dbg(&intf->dev, "data uploaded=%zu\n", fw->size - i); 662 } 663 664 /* print warn if firmware is bad, continue and see what happens */ 665 if (i) 666 dev_warn(&intf->dev, "bad firmware\n"); 667 668 return 0; 669 670 err: 671 dev_dbg(&intf->dev, "failed=%d\n", ret); 672 673 return ret; 674 } 675 676 static int af9035_download_firmware_new(struct dvb_usb_device *d, 677 const struct firmware *fw) 678 { 679 struct usb_interface *intf = d->intf; 680 int ret, i, i_prev; 681 struct usb_req req_fw_dl = { CMD_FW_SCATTER_WR, 0, 0, NULL, 0, NULL }; 682 #define HDR_SIZE 7 683 684 /* 685 * There seems to be following firmware header. Meaning of bytes 0-3 686 * is unknown. 687 * 688 * 0: 3 689 * 1: 0, 1 690 * 2: 0 691 * 3: 1, 2, 3 692 * 4: addr MSB 693 * 5: addr LSB 694 * 6: count of data bytes ? 695 */ 696 for (i = HDR_SIZE, i_prev = 0; i <= fw->size; i++) { 697 if (i == fw->size || 698 (fw->data[i + 0] == 0x03 && 699 (fw->data[i + 1] == 0x00 || 700 fw->data[i + 1] == 0x01) && 701 fw->data[i + 2] == 0x00)) { 702 req_fw_dl.wlen = i - i_prev; 703 req_fw_dl.wbuf = (u8 *) &fw->data[i_prev]; 704 i_prev = i; 705 ret = af9035_ctrl_msg(d, &req_fw_dl); 706 if (ret < 0) 707 goto err; 708 709 dev_dbg(&intf->dev, "data uploaded=%d\n", i); 710 } 711 } 712 713 return 0; 714 715 err: 716 dev_dbg(&intf->dev, "failed=%d\n", ret); 717 718 return ret; 719 } 720 721 static int af9035_download_firmware(struct dvb_usb_device *d, 722 const struct firmware *fw) 723 { 724 struct usb_interface *intf = d->intf; 725 struct state *state = d_to_priv(d); 726 int ret; 727 u8 wbuf[1]; 728 u8 rbuf[4]; 729 u8 tmp; 730 struct usb_req req = { 0, 0, 0, NULL, 0, NULL }; 731 struct usb_req req_fw_ver = { CMD_FW_QUERYINFO, 0, 1, wbuf, 4, rbuf }; 732 733 dev_dbg(&intf->dev, "\n"); 734 735 /* 736 * In case of dual tuner configuration we need to do some extra 737 * initialization in order to download firmware to slave demod too, 738 * which is done by master demod. 739 * Master feeds also clock and controls power via GPIO. 740 */ 741 if (state->dual_mode) { 742 /* configure gpioh1, reset & power slave demod */ 743 ret = af9035_wr_reg_mask(d, 0x00d8b0, 0x01, 0x01); 744 if (ret < 0) 745 goto err; 746 747 ret = af9035_wr_reg_mask(d, 0x00d8b1, 0x01, 0x01); 748 if (ret < 0) 749 goto err; 750 751 ret = af9035_wr_reg_mask(d, 0x00d8af, 0x00, 0x01); 752 if (ret < 0) 753 goto err; 754 755 usleep_range(10000, 50000); 756 757 ret = af9035_wr_reg_mask(d, 0x00d8af, 0x01, 0x01); 758 if (ret < 0) 759 goto err; 760 761 /* tell the slave I2C address */ 762 tmp = state->eeprom[EEPROM_2ND_DEMOD_ADDR]; 763 764 /* Use default I2C address if eeprom has no address set */ 765 if (!tmp) 766 tmp = 0x1d << 1; /* 8-bit format used by chip */ 767 768 if ((state->chip_type == 0x9135) || 769 (state->chip_type == 0x9306)) { 770 ret = af9035_wr_reg(d, 0x004bfb, tmp); 771 if (ret < 0) 772 goto err; 773 } else { 774 ret = af9035_wr_reg(d, 0x00417f, tmp); 775 if (ret < 0) 776 goto err; 777 778 /* enable clock out */ 779 ret = af9035_wr_reg_mask(d, 0x00d81a, 0x01, 0x01); 780 if (ret < 0) 781 goto err; 782 } 783 } 784 785 if (fw->data[0] == 0x01) 786 ret = af9035_download_firmware_old(d, fw); 787 else 788 ret = af9035_download_firmware_new(d, fw); 789 if (ret < 0) 790 goto err; 791 792 /* firmware loaded, request boot */ 793 req.cmd = CMD_FW_BOOT; 794 ret = af9035_ctrl_msg(d, &req); 795 if (ret < 0) 796 goto err; 797 798 /* ensure firmware starts */ 799 wbuf[0] = 1; 800 ret = af9035_ctrl_msg(d, &req_fw_ver); 801 if (ret < 0) 802 goto err; 803 804 if (!(rbuf[0] || rbuf[1] || rbuf[2] || rbuf[3])) { 805 dev_err(&intf->dev, "firmware did not run\n"); 806 ret = -ENODEV; 807 goto err; 808 } 809 810 dev_info(&intf->dev, "firmware version=%d.%d.%d.%d", 811 rbuf[0], rbuf[1], rbuf[2], rbuf[3]); 812 813 return 0; 814 815 err: 816 dev_dbg(&intf->dev, "failed=%d\n", ret); 817 818 return ret; 819 } 820 821 static int af9035_read_config(struct dvb_usb_device *d) 822 { 823 struct usb_interface *intf = d->intf; 824 struct state *state = d_to_priv(d); 825 int ret, i; 826 u8 tmp; 827 u16 tmp16; 828 829 /* Demod I2C address */ 830 state->af9033_i2c_addr[0] = 0x1c; 831 state->af9033_i2c_addr[1] = 0x1d; 832 state->af9033_config[0].adc_multiplier = AF9033_ADC_MULTIPLIER_2X; 833 state->af9033_config[1].adc_multiplier = AF9033_ADC_MULTIPLIER_2X; 834 state->af9033_config[0].ts_mode = AF9033_TS_MODE_USB; 835 state->af9033_config[1].ts_mode = AF9033_TS_MODE_SERIAL; 836 state->it930x_addresses = 0; 837 838 if (state->chip_type == 0x9135) { 839 /* feed clock for integrated RF tuner */ 840 state->af9033_config[0].dyn0_clk = true; 841 state->af9033_config[1].dyn0_clk = true; 842 843 if (state->chip_version == 0x02) { 844 state->af9033_config[0].tuner = AF9033_TUNER_IT9135_60; 845 state->af9033_config[1].tuner = AF9033_TUNER_IT9135_60; 846 } else { 847 state->af9033_config[0].tuner = AF9033_TUNER_IT9135_38; 848 state->af9033_config[1].tuner = AF9033_TUNER_IT9135_38; 849 } 850 851 if (state->no_eeprom) { 852 /* Remote controller to NEC polling by default */ 853 state->ir_mode = 0x05; 854 state->ir_type = 0x00; 855 856 goto skip_eeprom; 857 } 858 } else if (state->chip_type == 0x9306) { 859 /* 860 * IT930x is an USB bridge, only single demod-single tuner 861 * configurations seen so far. 862 */ 863 if ((le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_AVERMEDIA) && 864 (le16_to_cpu(d->udev->descriptor.idProduct) == USB_PID_AVERMEDIA_TD310)) { 865 state->it930x_addresses = 1; 866 } 867 return 0; 868 } 869 870 /* Remote controller */ 871 state->ir_mode = state->eeprom[EEPROM_IR_MODE]; 872 state->ir_type = state->eeprom[EEPROM_IR_TYPE]; 873 874 if (state->dual_mode) { 875 /* Read 2nd demodulator I2C address. 8-bit format on eeprom */ 876 tmp = state->eeprom[EEPROM_2ND_DEMOD_ADDR]; 877 if (tmp) 878 state->af9033_i2c_addr[1] = tmp >> 1; 879 880 dev_dbg(&intf->dev, "2nd demod I2C addr=%02x\n", 881 state->af9033_i2c_addr[1]); 882 } 883 884 for (i = 0; i < state->dual_mode + 1; i++) { 885 unsigned int eeprom_offset = 0; 886 887 /* tuner */ 888 tmp = state->eeprom[EEPROM_1_TUNER_ID + eeprom_offset]; 889 dev_dbg(&intf->dev, "[%d]tuner=%02x\n", i, tmp); 890 891 /* tuner sanity check */ 892 if (state->chip_type == 0x9135) { 893 if (state->chip_version == 0x02) { 894 /* IT9135 BX (v2) */ 895 switch (tmp) { 896 case AF9033_TUNER_IT9135_60: 897 case AF9033_TUNER_IT9135_61: 898 case AF9033_TUNER_IT9135_62: 899 state->af9033_config[i].tuner = tmp; 900 break; 901 } 902 } else { 903 /* IT9135 AX (v1) */ 904 switch (tmp) { 905 case AF9033_TUNER_IT9135_38: 906 case AF9033_TUNER_IT9135_51: 907 case AF9033_TUNER_IT9135_52: 908 state->af9033_config[i].tuner = tmp; 909 break; 910 } 911 } 912 } else { 913 /* AF9035 */ 914 state->af9033_config[i].tuner = tmp; 915 } 916 917 if (state->af9033_config[i].tuner != tmp) { 918 dev_info(&intf->dev, "[%d] overriding tuner from %02x to %02x\n", 919 i, tmp, state->af9033_config[i].tuner); 920 } 921 922 switch (state->af9033_config[i].tuner) { 923 case AF9033_TUNER_TUA9001: 924 case AF9033_TUNER_FC0011: 925 case AF9033_TUNER_MXL5007T: 926 case AF9033_TUNER_TDA18218: 927 case AF9033_TUNER_FC2580: 928 case AF9033_TUNER_FC0012: 929 state->af9033_config[i].spec_inv = 1; 930 break; 931 case AF9033_TUNER_IT9135_38: 932 case AF9033_TUNER_IT9135_51: 933 case AF9033_TUNER_IT9135_52: 934 case AF9033_TUNER_IT9135_60: 935 case AF9033_TUNER_IT9135_61: 936 case AF9033_TUNER_IT9135_62: 937 break; 938 default: 939 dev_warn(&intf->dev, "tuner id=%02x not supported, please report!", 940 tmp); 941 } 942 943 /* disable dual mode if driver does not support it */ 944 if (i == 1) 945 switch (state->af9033_config[i].tuner) { 946 case AF9033_TUNER_FC0012: 947 case AF9033_TUNER_IT9135_38: 948 case AF9033_TUNER_IT9135_51: 949 case AF9033_TUNER_IT9135_52: 950 case AF9033_TUNER_IT9135_60: 951 case AF9033_TUNER_IT9135_61: 952 case AF9033_TUNER_IT9135_62: 953 case AF9033_TUNER_MXL5007T: 954 break; 955 default: 956 state->dual_mode = false; 957 dev_info(&intf->dev, "driver does not support 2nd tuner and will disable it"); 958 } 959 960 /* tuner IF frequency */ 961 tmp = state->eeprom[EEPROM_1_IF_L + eeprom_offset]; 962 tmp16 = tmp << 0; 963 tmp = state->eeprom[EEPROM_1_IF_H + eeprom_offset]; 964 tmp16 |= tmp << 8; 965 dev_dbg(&intf->dev, "[%d]IF=%d\n", i, tmp16); 966 967 eeprom_offset += 0x10; /* shift for the 2nd tuner params */ 968 } 969 970 skip_eeprom: 971 /* get demod clock */ 972 ret = af9035_rd_reg(d, 0x00d800, &tmp); 973 if (ret < 0) 974 goto err; 975 976 tmp = (tmp >> 0) & 0x0f; 977 978 for (i = 0; i < ARRAY_SIZE(state->af9033_config); i++) { 979 if (state->chip_type == 0x9135) 980 state->af9033_config[i].clock = clock_lut_it9135[tmp]; 981 else 982 state->af9033_config[i].clock = clock_lut_af9035[tmp]; 983 } 984 985 state->no_read = false; 986 /* Some MXL5007T devices cannot properly handle tuner I2C read ops. */ 987 if (state->af9033_config[0].tuner == AF9033_TUNER_MXL5007T && 988 le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_AVERMEDIA) 989 990 switch (le16_to_cpu(d->udev->descriptor.idProduct)) { 991 case USB_PID_AVERMEDIA_A867: 992 case USB_PID_AVERMEDIA_TWINSTAR: 993 dev_info(&intf->dev, 994 "Device may have issues with I2C read operations. Enabling fix.\n"); 995 state->no_read = true; 996 break; 997 } 998 999 return 0; 1000 1001 err: 1002 dev_dbg(&intf->dev, "failed=%d\n", ret); 1003 1004 return ret; 1005 } 1006 1007 static int af9035_tua9001_tuner_callback(struct dvb_usb_device *d, 1008 int cmd, int arg) 1009 { 1010 struct usb_interface *intf = d->intf; 1011 int ret; 1012 u8 val; 1013 1014 dev_dbg(&intf->dev, "cmd=%d arg=%d\n", cmd, arg); 1015 1016 /* 1017 * CEN always enabled by hardware wiring 1018 * RESETN GPIOT3 1019 * RXEN GPIOT2 1020 */ 1021 1022 switch (cmd) { 1023 case TUA9001_CMD_RESETN: 1024 if (arg) 1025 val = 0x00; 1026 else 1027 val = 0x01; 1028 1029 ret = af9035_wr_reg_mask(d, 0x00d8e7, val, 0x01); 1030 if (ret < 0) 1031 goto err; 1032 break; 1033 case TUA9001_CMD_RXEN: 1034 if (arg) 1035 val = 0x01; 1036 else 1037 val = 0x00; 1038 1039 ret = af9035_wr_reg_mask(d, 0x00d8eb, val, 0x01); 1040 if (ret < 0) 1041 goto err; 1042 break; 1043 } 1044 1045 return 0; 1046 1047 err: 1048 dev_dbg(&intf->dev, "failed=%d\n", ret); 1049 1050 return ret; 1051 } 1052 1053 1054 static int af9035_fc0011_tuner_callback(struct dvb_usb_device *d, 1055 int cmd, int arg) 1056 { 1057 struct usb_interface *intf = d->intf; 1058 int ret; 1059 1060 switch (cmd) { 1061 case FC0011_FE_CALLBACK_POWER: 1062 /* Tuner enable */ 1063 ret = af9035_wr_reg_mask(d, 0xd8eb, 1, 1); 1064 if (ret < 0) 1065 goto err; 1066 1067 ret = af9035_wr_reg_mask(d, 0xd8ec, 1, 1); 1068 if (ret < 0) 1069 goto err; 1070 1071 ret = af9035_wr_reg_mask(d, 0xd8ed, 1, 1); 1072 if (ret < 0) 1073 goto err; 1074 1075 /* LED */ 1076 ret = af9035_wr_reg_mask(d, 0xd8d0, 1, 1); 1077 if (ret < 0) 1078 goto err; 1079 1080 ret = af9035_wr_reg_mask(d, 0xd8d1, 1, 1); 1081 if (ret < 0) 1082 goto err; 1083 1084 usleep_range(10000, 50000); 1085 break; 1086 case FC0011_FE_CALLBACK_RESET: 1087 ret = af9035_wr_reg(d, 0xd8e9, 1); 1088 if (ret < 0) 1089 goto err; 1090 1091 ret = af9035_wr_reg(d, 0xd8e8, 1); 1092 if (ret < 0) 1093 goto err; 1094 1095 ret = af9035_wr_reg(d, 0xd8e7, 1); 1096 if (ret < 0) 1097 goto err; 1098 1099 usleep_range(10000, 20000); 1100 1101 ret = af9035_wr_reg(d, 0xd8e7, 0); 1102 if (ret < 0) 1103 goto err; 1104 1105 usleep_range(10000, 20000); 1106 break; 1107 default: 1108 ret = -EINVAL; 1109 goto err; 1110 } 1111 1112 return 0; 1113 1114 err: 1115 dev_dbg(&intf->dev, "failed=%d\n", ret); 1116 1117 return ret; 1118 } 1119 1120 static int af9035_tuner_callback(struct dvb_usb_device *d, int cmd, int arg) 1121 { 1122 struct state *state = d_to_priv(d); 1123 1124 switch (state->af9033_config[0].tuner) { 1125 case AF9033_TUNER_FC0011: 1126 return af9035_fc0011_tuner_callback(d, cmd, arg); 1127 case AF9033_TUNER_TUA9001: 1128 return af9035_tua9001_tuner_callback(d, cmd, arg); 1129 default: 1130 break; 1131 } 1132 1133 return 0; 1134 } 1135 1136 static int af9035_frontend_callback(void *adapter_priv, int component, 1137 int cmd, int arg) 1138 { 1139 struct i2c_adapter *adap = adapter_priv; 1140 struct dvb_usb_device *d = i2c_get_adapdata(adap); 1141 struct usb_interface *intf = d->intf; 1142 1143 dev_dbg(&intf->dev, "component=%d cmd=%d arg=%d\n", 1144 component, cmd, arg); 1145 1146 switch (component) { 1147 case DVB_FRONTEND_COMPONENT_TUNER: 1148 return af9035_tuner_callback(d, cmd, arg); 1149 default: 1150 break; 1151 } 1152 1153 return 0; 1154 } 1155 1156 static int af9035_get_adapter_count(struct dvb_usb_device *d) 1157 { 1158 struct state *state = d_to_priv(d); 1159 1160 return state->dual_mode + 1; 1161 } 1162 1163 static int af9035_frontend_attach(struct dvb_usb_adapter *adap) 1164 { 1165 struct state *state = adap_to_priv(adap); 1166 struct dvb_usb_device *d = adap_to_d(adap); 1167 struct usb_interface *intf = d->intf; 1168 int ret; 1169 1170 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1171 1172 if (!state->af9033_config[adap->id].tuner) { 1173 /* unsupported tuner */ 1174 ret = -ENODEV; 1175 goto err; 1176 } 1177 1178 state->af9033_config[adap->id].fe = &adap->fe[0]; 1179 state->af9033_config[adap->id].ops = &state->ops; 1180 ret = af9035_add_i2c_dev(d, "af9033", state->af9033_i2c_addr[adap->id], 1181 &state->af9033_config[adap->id], &d->i2c_adap); 1182 if (ret) 1183 goto err; 1184 1185 if (adap->fe[0] == NULL) { 1186 ret = -ENODEV; 1187 goto err; 1188 } 1189 1190 /* disable I2C-gate */ 1191 adap->fe[0]->ops.i2c_gate_ctrl = NULL; 1192 adap->fe[0]->callback = af9035_frontend_callback; 1193 1194 return 0; 1195 1196 err: 1197 dev_dbg(&intf->dev, "failed=%d\n", ret); 1198 1199 return ret; 1200 } 1201 1202 /* 1203 * The I2C speed register is calculated with: 1204 * I2C speed register = (1000000000 / (24.4 * 16 * I2C_speed)) 1205 * 1206 * The default speed register for it930x is 7, with means a 1207 * speed of ~366 kbps 1208 */ 1209 #define I2C_SPEED_366K 7 1210 1211 static int it930x_frontend_attach(struct dvb_usb_adapter *adap) 1212 { 1213 struct state *state = adap_to_priv(adap); 1214 struct dvb_usb_device *d = adap_to_d(adap); 1215 struct usb_interface *intf = d->intf; 1216 int ret; 1217 struct si2168_config si2168_config; 1218 struct i2c_adapter *adapter; 1219 1220 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1221 1222 /* I2C master bus 2 clock speed 366k */ 1223 ret = af9035_wr_reg(d, 0x00f6a7, I2C_SPEED_366K); 1224 if (ret < 0) 1225 goto err; 1226 1227 /* I2C master bus 1,3 clock speed 366k */ 1228 ret = af9035_wr_reg(d, 0x00f103, I2C_SPEED_366K); 1229 if (ret < 0) 1230 goto err; 1231 1232 /* set gpio11 low */ 1233 ret = af9035_wr_reg_mask(d, 0xd8d4, 0x01, 0x01); 1234 if (ret < 0) 1235 goto err; 1236 1237 ret = af9035_wr_reg_mask(d, 0xd8d5, 0x01, 0x01); 1238 if (ret < 0) 1239 goto err; 1240 1241 ret = af9035_wr_reg_mask(d, 0xd8d3, 0x01, 0x01); 1242 if (ret < 0) 1243 goto err; 1244 1245 /* Tuner enable using gpiot2_en, gpiot2_on and gpiot2_o (reset) */ 1246 ret = af9035_wr_reg_mask(d, 0xd8b8, 0x01, 0x01); 1247 if (ret < 0) 1248 goto err; 1249 1250 ret = af9035_wr_reg_mask(d, 0xd8b9, 0x01, 0x01); 1251 if (ret < 0) 1252 goto err; 1253 1254 ret = af9035_wr_reg_mask(d, 0xd8b7, 0x00, 0x01); 1255 if (ret < 0) 1256 goto err; 1257 1258 msleep(200); 1259 1260 ret = af9035_wr_reg_mask(d, 0xd8b7, 0x01, 0x01); 1261 if (ret < 0) 1262 goto err; 1263 1264 memset(&si2168_config, 0, sizeof(si2168_config)); 1265 si2168_config.i2c_adapter = &adapter; 1266 si2168_config.fe = &adap->fe[0]; 1267 si2168_config.ts_mode = SI2168_TS_SERIAL; 1268 1269 state->af9033_config[adap->id].fe = &adap->fe[0]; 1270 state->af9033_config[adap->id].ops = &state->ops; 1271 ret = af9035_add_i2c_dev(d, "si2168", 1272 it930x_addresses_table[state->it930x_addresses].frontend_i2c_addr, 1273 &si2168_config, &d->i2c_adap); 1274 if (ret) 1275 goto err; 1276 1277 if (adap->fe[0] == NULL) { 1278 ret = -ENODEV; 1279 goto err; 1280 } 1281 state->i2c_adapter_demod = adapter; 1282 1283 return 0; 1284 1285 err: 1286 dev_dbg(&intf->dev, "failed=%d\n", ret); 1287 1288 return ret; 1289 } 1290 1291 static int af9035_frontend_detach(struct dvb_usb_adapter *adap) 1292 { 1293 struct state *state = adap_to_priv(adap); 1294 struct dvb_usb_device *d = adap_to_d(adap); 1295 struct usb_interface *intf = d->intf; 1296 1297 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1298 1299 if (adap->id == 1) { 1300 if (state->i2c_client[1]) 1301 af9035_del_i2c_dev(d); 1302 } else if (adap->id == 0) { 1303 if (state->i2c_client[0]) 1304 af9035_del_i2c_dev(d); 1305 } 1306 1307 return 0; 1308 } 1309 1310 static const struct fc0011_config af9035_fc0011_config = { 1311 .i2c_address = 0x60, 1312 }; 1313 1314 static struct mxl5007t_config af9035_mxl5007t_config[] = { 1315 { 1316 .xtal_freq_hz = MxL_XTAL_24_MHZ, 1317 .if_freq_hz = MxL_IF_4_57_MHZ, 1318 .invert_if = 0, 1319 .loop_thru_enable = 0, 1320 .clk_out_enable = 0, 1321 .clk_out_amp = MxL_CLKOUT_AMP_0_94V, 1322 }, { 1323 .xtal_freq_hz = MxL_XTAL_24_MHZ, 1324 .if_freq_hz = MxL_IF_4_57_MHZ, 1325 .invert_if = 0, 1326 .loop_thru_enable = 1, 1327 .clk_out_enable = 1, 1328 .clk_out_amp = MxL_CLKOUT_AMP_0_94V, 1329 } 1330 }; 1331 1332 static struct tda18218_config af9035_tda18218_config = { 1333 .i2c_address = 0x60, 1334 .i2c_wr_max = 21, 1335 }; 1336 1337 static const struct fc0012_config af9035_fc0012_config[] = { 1338 { 1339 .i2c_address = 0x63, 1340 .xtal_freq = FC_XTAL_36_MHZ, 1341 .dual_master = true, 1342 .loop_through = true, 1343 .clock_out = true, 1344 }, { 1345 .i2c_address = 0x63 | 0x80, /* I2C bus select hack */ 1346 .xtal_freq = FC_XTAL_36_MHZ, 1347 .dual_master = true, 1348 } 1349 }; 1350 1351 static int af9035_tuner_attach(struct dvb_usb_adapter *adap) 1352 { 1353 struct state *state = adap_to_priv(adap); 1354 struct dvb_usb_device *d = adap_to_d(adap); 1355 struct usb_interface *intf = d->intf; 1356 int ret; 1357 struct dvb_frontend *fe; 1358 struct i2c_msg msg[1]; 1359 u8 tuner_addr; 1360 1361 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1362 1363 /* 1364 * XXX: Hack used in that function: we abuse unused I2C address bit [7] 1365 * to carry info about used I2C bus for dual tuner configuration. 1366 */ 1367 1368 switch (state->af9033_config[adap->id].tuner) { 1369 case AF9033_TUNER_TUA9001: { 1370 struct tua9001_platform_data tua9001_pdata = { 1371 .dvb_frontend = adap->fe[0], 1372 }; 1373 1374 /* 1375 * AF9035 gpiot3 = TUA9001 RESETN 1376 * AF9035 gpiot2 = TUA9001 RXEN 1377 */ 1378 1379 /* configure gpiot2 and gpiot2 as output */ 1380 ret = af9035_wr_reg_mask(d, 0x00d8ec, 0x01, 0x01); 1381 if (ret < 0) 1382 goto err; 1383 1384 ret = af9035_wr_reg_mask(d, 0x00d8ed, 0x01, 0x01); 1385 if (ret < 0) 1386 goto err; 1387 1388 ret = af9035_wr_reg_mask(d, 0x00d8e8, 0x01, 0x01); 1389 if (ret < 0) 1390 goto err; 1391 1392 ret = af9035_wr_reg_mask(d, 0x00d8e9, 0x01, 0x01); 1393 if (ret < 0) 1394 goto err; 1395 1396 /* attach tuner */ 1397 ret = af9035_add_i2c_dev(d, "tua9001", 0x60, &tua9001_pdata, 1398 &d->i2c_adap); 1399 if (ret) 1400 goto err; 1401 1402 fe = adap->fe[0]; 1403 break; 1404 } 1405 case AF9033_TUNER_FC0011: 1406 fe = dvb_attach(fc0011_attach, adap->fe[0], 1407 &d->i2c_adap, &af9035_fc0011_config); 1408 break; 1409 case AF9033_TUNER_MXL5007T: 1410 if (adap->id == 0) { 1411 ret = af9035_wr_reg(d, 0x00d8e0, 1); 1412 if (ret < 0) 1413 goto err; 1414 1415 ret = af9035_wr_reg(d, 0x00d8e1, 1); 1416 if (ret < 0) 1417 goto err; 1418 1419 ret = af9035_wr_reg(d, 0x00d8df, 0); 1420 if (ret < 0) 1421 goto err; 1422 1423 msleep(30); 1424 1425 ret = af9035_wr_reg(d, 0x00d8df, 1); 1426 if (ret < 0) 1427 goto err; 1428 1429 msleep(300); 1430 1431 ret = af9035_wr_reg(d, 0x00d8c0, 1); 1432 if (ret < 0) 1433 goto err; 1434 1435 ret = af9035_wr_reg(d, 0x00d8c1, 1); 1436 if (ret < 0) 1437 goto err; 1438 1439 ret = af9035_wr_reg(d, 0x00d8bf, 0); 1440 if (ret < 0) 1441 goto err; 1442 1443 ret = af9035_wr_reg(d, 0x00d8b4, 1); 1444 if (ret < 0) 1445 goto err; 1446 1447 ret = af9035_wr_reg(d, 0x00d8b5, 1); 1448 if (ret < 0) 1449 goto err; 1450 1451 ret = af9035_wr_reg(d, 0x00d8b3, 1); 1452 if (ret < 0) 1453 goto err; 1454 1455 tuner_addr = 0x60; 1456 } else { 1457 tuner_addr = 0x60 | 0x80; /* I2C bus hack */ 1458 } 1459 1460 /* attach tuner */ 1461 fe = dvb_attach(mxl5007t_attach, adap->fe[0], &d->i2c_adap, 1462 tuner_addr, &af9035_mxl5007t_config[adap->id]); 1463 break; 1464 case AF9033_TUNER_TDA18218: 1465 /* attach tuner */ 1466 fe = dvb_attach(tda18218_attach, adap->fe[0], 1467 &d->i2c_adap, &af9035_tda18218_config); 1468 break; 1469 case AF9033_TUNER_FC2580: { 1470 struct fc2580_platform_data fc2580_pdata = { 1471 .dvb_frontend = adap->fe[0], 1472 }; 1473 1474 /* Tuner enable using gpiot2_o, gpiot2_en and gpiot2_on */ 1475 ret = af9035_wr_reg_mask(d, 0xd8eb, 0x01, 0x01); 1476 if (ret < 0) 1477 goto err; 1478 1479 ret = af9035_wr_reg_mask(d, 0xd8ec, 0x01, 0x01); 1480 if (ret < 0) 1481 goto err; 1482 1483 ret = af9035_wr_reg_mask(d, 0xd8ed, 0x01, 0x01); 1484 if (ret < 0) 1485 goto err; 1486 1487 usleep_range(10000, 50000); 1488 /* attach tuner */ 1489 ret = af9035_add_i2c_dev(d, "fc2580", 0x56, &fc2580_pdata, 1490 &d->i2c_adap); 1491 if (ret) 1492 goto err; 1493 1494 fe = adap->fe[0]; 1495 break; 1496 } 1497 case AF9033_TUNER_FC0012: 1498 /* 1499 * AF9035 gpiot2 = FC0012 enable 1500 * XXX: there seems to be something on gpioh8 too, but on my 1501 * test I didn't find any difference. 1502 */ 1503 1504 if (adap->id == 0) { 1505 /* configure gpiot2 as output and high */ 1506 ret = af9035_wr_reg_mask(d, 0xd8eb, 0x01, 0x01); 1507 if (ret < 0) 1508 goto err; 1509 1510 ret = af9035_wr_reg_mask(d, 0xd8ec, 0x01, 0x01); 1511 if (ret < 0) 1512 goto err; 1513 1514 ret = af9035_wr_reg_mask(d, 0xd8ed, 0x01, 0x01); 1515 if (ret < 0) 1516 goto err; 1517 } else { 1518 /* 1519 * FIXME: That belongs for the FC0012 driver. 1520 * Write 02 to FC0012 master tuner register 0d directly 1521 * in order to make slave tuner working. 1522 */ 1523 msg[0].addr = 0x63; 1524 msg[0].flags = 0; 1525 msg[0].len = 2; 1526 msg[0].buf = "\x0d\x02"; 1527 ret = i2c_transfer(&d->i2c_adap, msg, 1); 1528 if (ret < 0) 1529 goto err; 1530 } 1531 1532 usleep_range(10000, 50000); 1533 1534 fe = dvb_attach(fc0012_attach, adap->fe[0], &d->i2c_adap, 1535 &af9035_fc0012_config[adap->id]); 1536 break; 1537 case AF9033_TUNER_IT9135_38: 1538 case AF9033_TUNER_IT9135_51: 1539 case AF9033_TUNER_IT9135_52: 1540 case AF9033_TUNER_IT9135_60: 1541 case AF9033_TUNER_IT9135_61: 1542 case AF9033_TUNER_IT9135_62: 1543 { 1544 struct platform_device *pdev; 1545 const char *name; 1546 struct it913x_platform_data it913x_pdata = { 1547 .regmap = state->af9033_config[adap->id].regmap, 1548 .fe = adap->fe[0], 1549 }; 1550 1551 switch (state->af9033_config[adap->id].tuner) { 1552 case AF9033_TUNER_IT9135_38: 1553 case AF9033_TUNER_IT9135_51: 1554 case AF9033_TUNER_IT9135_52: 1555 name = "it9133ax-tuner"; 1556 break; 1557 case AF9033_TUNER_IT9135_60: 1558 case AF9033_TUNER_IT9135_61: 1559 case AF9033_TUNER_IT9135_62: 1560 name = "it9133bx-tuner"; 1561 break; 1562 default: 1563 ret = -ENODEV; 1564 goto err; 1565 } 1566 1567 if (state->dual_mode) { 1568 if (adap->id == 0) 1569 it913x_pdata.role = IT913X_ROLE_DUAL_MASTER; 1570 else 1571 it913x_pdata.role = IT913X_ROLE_DUAL_SLAVE; 1572 } else { 1573 it913x_pdata.role = IT913X_ROLE_SINGLE; 1574 } 1575 1576 request_module("%s", "it913x"); 1577 pdev = platform_device_register_data(&d->intf->dev, name, 1578 PLATFORM_DEVID_AUTO, 1579 &it913x_pdata, 1580 sizeof(it913x_pdata)); 1581 if (IS_ERR(pdev) || !pdev->dev.driver) { 1582 ret = -ENODEV; 1583 goto err; 1584 } 1585 if (!try_module_get(pdev->dev.driver->owner)) { 1586 platform_device_unregister(pdev); 1587 ret = -ENODEV; 1588 goto err; 1589 } 1590 1591 state->platform_device_tuner[adap->id] = pdev; 1592 fe = adap->fe[0]; 1593 break; 1594 } 1595 default: 1596 fe = NULL; 1597 } 1598 1599 if (fe == NULL) { 1600 ret = -ENODEV; 1601 goto err; 1602 } 1603 1604 return 0; 1605 1606 err: 1607 dev_dbg(&intf->dev, "failed=%d\n", ret); 1608 1609 return ret; 1610 } 1611 1612 static int it930x_tuner_attach(struct dvb_usb_adapter *adap) 1613 { 1614 struct state *state = adap_to_priv(adap); 1615 struct dvb_usb_device *d = adap_to_d(adap); 1616 struct usb_interface *intf = d->intf; 1617 int ret; 1618 struct si2157_config si2157_config; 1619 1620 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1621 1622 memset(&si2157_config, 0, sizeof(si2157_config)); 1623 si2157_config.fe = adap->fe[0]; 1624 1625 /* 1626 * HACK: The Logilink VG0022A and TerraTec TC2 Stick have 1627 * a bug: when the si2157 firmware that came with the device 1628 * is replaced by a new one, the I2C transfers to the tuner 1629 * will return just 0xff. 1630 * 1631 * Probably, the vendor firmware has some patch specifically 1632 * designed for this device. So, we can't replace by the 1633 * generic firmware. The right solution would be to extract 1634 * the si2157 firmware from the original driver and ask the 1635 * driver to load the specifically designed firmware, but, 1636 * while we don't have that, the next best solution is to just 1637 * keep the original firmware at the device. 1638 */ 1639 if ((le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_DEXATEK && 1640 le16_to_cpu(d->udev->descriptor.idProduct) == 0x0100) || 1641 (le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_TERRATEC && 1642 le16_to_cpu(d->udev->descriptor.idProduct) == USB_PID_TERRATEC_CINERGY_TC2_STICK)) 1643 si2157_config.dont_load_firmware = true; 1644 1645 si2157_config.if_port = it930x_addresses_table[state->it930x_addresses].tuner_if_port; 1646 ret = af9035_add_i2c_dev(d, "si2157", 1647 it930x_addresses_table[state->it930x_addresses].tuner_i2c_addr, 1648 &si2157_config, state->i2c_adapter_demod); 1649 if (ret) 1650 goto err; 1651 1652 return 0; 1653 1654 err: 1655 dev_dbg(&intf->dev, "failed=%d\n", ret); 1656 1657 return ret; 1658 } 1659 1660 1661 static int it930x_tuner_detach(struct dvb_usb_adapter *adap) 1662 { 1663 struct state *state = adap_to_priv(adap); 1664 struct dvb_usb_device *d = adap_to_d(adap); 1665 struct usb_interface *intf = d->intf; 1666 1667 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1668 1669 if (adap->id == 1) { 1670 if (state->i2c_client[3]) 1671 af9035_del_i2c_dev(d); 1672 } else if (adap->id == 0) { 1673 if (state->i2c_client[1]) 1674 af9035_del_i2c_dev(d); 1675 } 1676 1677 return 0; 1678 } 1679 1680 1681 static int af9035_tuner_detach(struct dvb_usb_adapter *adap) 1682 { 1683 struct state *state = adap_to_priv(adap); 1684 struct dvb_usb_device *d = adap_to_d(adap); 1685 struct usb_interface *intf = d->intf; 1686 1687 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1688 1689 switch (state->af9033_config[adap->id].tuner) { 1690 case AF9033_TUNER_TUA9001: 1691 case AF9033_TUNER_FC2580: 1692 if (adap->id == 1) { 1693 if (state->i2c_client[3]) 1694 af9035_del_i2c_dev(d); 1695 } else if (adap->id == 0) { 1696 if (state->i2c_client[1]) 1697 af9035_del_i2c_dev(d); 1698 } 1699 break; 1700 case AF9033_TUNER_IT9135_38: 1701 case AF9033_TUNER_IT9135_51: 1702 case AF9033_TUNER_IT9135_52: 1703 case AF9033_TUNER_IT9135_60: 1704 case AF9033_TUNER_IT9135_61: 1705 case AF9033_TUNER_IT9135_62: 1706 { 1707 struct platform_device *pdev; 1708 1709 pdev = state->platform_device_tuner[adap->id]; 1710 if (pdev) { 1711 module_put(pdev->dev.driver->owner); 1712 platform_device_unregister(pdev); 1713 } 1714 break; 1715 } 1716 } 1717 1718 return 0; 1719 } 1720 1721 static int af9035_init(struct dvb_usb_device *d) 1722 { 1723 struct state *state = d_to_priv(d); 1724 struct usb_interface *intf = d->intf; 1725 int ret, i; 1726 u16 frame_size = (d->udev->speed == USB_SPEED_FULL ? 5 : 87) * 188 / 4; 1727 u8 packet_size = (d->udev->speed == USB_SPEED_FULL ? 64 : 512) / 4; 1728 struct reg_val_mask tab[] = { 1729 { 0x80f99d, 0x01, 0x01 }, 1730 { 0x80f9a4, 0x01, 0x01 }, 1731 { 0x00dd11, 0x00, 0x20 }, 1732 { 0x00dd11, 0x00, 0x40 }, 1733 { 0x00dd13, 0x00, 0x20 }, 1734 { 0x00dd13, 0x00, 0x40 }, 1735 { 0x00dd11, 0x20, 0x20 }, 1736 { 0x00dd88, (frame_size >> 0) & 0xff, 0xff}, 1737 { 0x00dd89, (frame_size >> 8) & 0xff, 0xff}, 1738 { 0x00dd0c, packet_size, 0xff}, 1739 { 0x00dd11, state->dual_mode << 6, 0x40 }, 1740 { 0x00dd8a, (frame_size >> 0) & 0xff, 0xff}, 1741 { 0x00dd8b, (frame_size >> 8) & 0xff, 0xff}, 1742 { 0x00dd0d, packet_size, 0xff }, 1743 { 0x80f9a3, state->dual_mode, 0x01 }, 1744 { 0x80f9cd, state->dual_mode, 0x01 }, 1745 { 0x80f99d, 0x00, 0x01 }, 1746 { 0x80f9a4, 0x00, 0x01 }, 1747 }; 1748 1749 dev_dbg(&intf->dev, "USB speed=%d frame_size=%04x packet_size=%02x\n", 1750 d->udev->speed, frame_size, packet_size); 1751 1752 /* init endpoints */ 1753 for (i = 0; i < ARRAY_SIZE(tab); i++) { 1754 ret = af9035_wr_reg_mask(d, tab[i].reg, tab[i].val, 1755 tab[i].mask); 1756 if (ret < 0) 1757 goto err; 1758 } 1759 1760 return 0; 1761 1762 err: 1763 dev_dbg(&intf->dev, "failed=%d\n", ret); 1764 1765 return ret; 1766 } 1767 1768 static int it930x_init(struct dvb_usb_device *d) 1769 { 1770 struct state *state = d_to_priv(d); 1771 struct usb_interface *intf = d->intf; 1772 int ret, i; 1773 u16 frame_size = (d->udev->speed == USB_SPEED_FULL ? 5 : 816) * 188 / 4; 1774 u8 packet_size = (d->udev->speed == USB_SPEED_FULL ? 64 : 512) / 4; 1775 struct reg_val_mask tab[] = { 1776 { 0x00da1a, 0x00, 0x01 }, /* ignore_sync_byte */ 1777 { 0x00f41f, 0x04, 0x04 }, /* dvbt_inten */ 1778 { 0x00da10, 0x00, 0x01 }, /* mpeg_full_speed */ 1779 { 0x00f41a, 0x01, 0x01 }, /* dvbt_en */ 1780 { 0x00da1d, 0x01, 0x01 }, /* mp2_sw_rst, reset EP4 */ 1781 { 0x00dd11, 0x00, 0x20 }, /* ep4_tx_en, disable EP4 */ 1782 { 0x00dd13, 0x00, 0x20 }, /* ep4_tx_nak, disable EP4 NAK */ 1783 { 0x00dd11, 0x20, 0x20 }, /* ep4_tx_en, enable EP4 */ 1784 { 0x00dd11, 0x00, 0x40 }, /* ep5_tx_en, disable EP5 */ 1785 { 0x00dd13, 0x00, 0x40 }, /* ep5_tx_nak, disable EP5 NAK */ 1786 { 0x00dd11, state->dual_mode << 6, 0x40 }, /* enable EP5 */ 1787 { 0x00dd88, (frame_size >> 0) & 0xff, 0xff}, 1788 { 0x00dd89, (frame_size >> 8) & 0xff, 0xff}, 1789 { 0x00dd0c, packet_size, 0xff}, 1790 { 0x00dd8a, (frame_size >> 0) & 0xff, 0xff}, 1791 { 0x00dd8b, (frame_size >> 8) & 0xff, 0xff}, 1792 { 0x00dd0d, packet_size, 0xff }, 1793 { 0x00da1d, 0x00, 0x01 }, /* mp2_sw_rst, disable */ 1794 { 0x00d833, 0x01, 0xff }, /* slew rate ctrl: slew rate boosts */ 1795 { 0x00d830, 0x00, 0xff }, /* Bit 0 of output driving control */ 1796 { 0x00d831, 0x01, 0xff }, /* Bit 1 of output driving control */ 1797 { 0x00d832, 0x00, 0xff }, /* Bit 2 of output driving control */ 1798 1799 /* suspend gpio1 for TS-C */ 1800 { 0x00d8b0, 0x01, 0xff }, /* gpio1 */ 1801 { 0x00d8b1, 0x01, 0xff }, /* gpio1 */ 1802 { 0x00d8af, 0x00, 0xff }, /* gpio1 */ 1803 1804 /* suspend gpio7 for TS-D */ 1805 { 0x00d8c4, 0x01, 0xff }, /* gpio7 */ 1806 { 0x00d8c5, 0x01, 0xff }, /* gpio7 */ 1807 { 0x00d8c3, 0x00, 0xff }, /* gpio7 */ 1808 1809 /* suspend gpio13 for TS-B */ 1810 { 0x00d8dc, 0x01, 0xff }, /* gpio13 */ 1811 { 0x00d8dd, 0x01, 0xff }, /* gpio13 */ 1812 { 0x00d8db, 0x00, 0xff }, /* gpio13 */ 1813 1814 /* suspend gpio14 for TS-E */ 1815 { 0x00d8e4, 0x01, 0xff }, /* gpio14 */ 1816 { 0x00d8e5, 0x01, 0xff }, /* gpio14 */ 1817 { 0x00d8e3, 0x00, 0xff }, /* gpio14 */ 1818 1819 /* suspend gpio15 for TS-A */ 1820 { 0x00d8e8, 0x01, 0xff }, /* gpio15 */ 1821 { 0x00d8e9, 0x01, 0xff }, /* gpio15 */ 1822 { 0x00d8e7, 0x00, 0xff }, /* gpio15 */ 1823 1824 { 0x00da58, 0x00, 0x01 }, /* ts_in_src, serial */ 1825 { 0x00da73, 0x01, 0xff }, /* ts0_aggre_mode */ 1826 { 0x00da78, 0x47, 0xff }, /* ts0_sync_byte */ 1827 { 0x00da4c, 0x01, 0xff }, /* ts0_en */ 1828 { 0x00da5a, 0x1f, 0xff }, /* ts_fail_ignore */ 1829 }; 1830 1831 dev_dbg(&intf->dev, "USB speed=%d frame_size=%04x packet_size=%02x\n", 1832 d->udev->speed, frame_size, packet_size); 1833 1834 /* init endpoints */ 1835 for (i = 0; i < ARRAY_SIZE(tab); i++) { 1836 ret = af9035_wr_reg_mask(d, tab[i].reg, 1837 tab[i].val, tab[i].mask); 1838 1839 if (ret < 0) 1840 goto err; 1841 } 1842 1843 return 0; 1844 err: 1845 dev_dbg(&intf->dev, "failed=%d\n", ret); 1846 1847 return ret; 1848 } 1849 1850 1851 #if IS_ENABLED(CONFIG_RC_CORE) 1852 static int af9035_rc_query(struct dvb_usb_device *d) 1853 { 1854 struct usb_interface *intf = d->intf; 1855 int ret; 1856 enum rc_proto proto; 1857 u32 key; 1858 u8 buf[4]; 1859 struct usb_req req = { CMD_IR_GET, 0, 0, NULL, 4, buf }; 1860 1861 ret = af9035_ctrl_msg(d, &req); 1862 if (ret == 1) 1863 return 0; 1864 else if (ret < 0) 1865 goto err; 1866 1867 if ((buf[2] + buf[3]) == 0xff) { 1868 if ((buf[0] + buf[1]) == 0xff) { 1869 /* NEC standard 16bit */ 1870 key = RC_SCANCODE_NEC(buf[0], buf[2]); 1871 proto = RC_PROTO_NEC; 1872 } else { 1873 /* NEC extended 24bit */ 1874 key = RC_SCANCODE_NECX(buf[0] << 8 | buf[1], buf[2]); 1875 proto = RC_PROTO_NECX; 1876 } 1877 } else { 1878 /* NEC full code 32bit */ 1879 key = RC_SCANCODE_NEC32(buf[0] << 24 | buf[1] << 16 | 1880 buf[2] << 8 | buf[3]); 1881 proto = RC_PROTO_NEC32; 1882 } 1883 1884 dev_dbg(&intf->dev, "%*ph\n", 4, buf); 1885 1886 rc_keydown(d->rc_dev, proto, key, 0); 1887 1888 return 0; 1889 1890 err: 1891 dev_dbg(&intf->dev, "failed=%d\n", ret); 1892 1893 return ret; 1894 } 1895 1896 static int af9035_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) 1897 { 1898 struct state *state = d_to_priv(d); 1899 struct usb_interface *intf = d->intf; 1900 1901 dev_dbg(&intf->dev, "ir_mode=%02x ir_type=%02x\n", 1902 state->ir_mode, state->ir_type); 1903 1904 /* don't activate rc if in HID mode or if not available */ 1905 if (state->ir_mode == 0x05) { 1906 switch (state->ir_type) { 1907 case 0: /* NEC */ 1908 default: 1909 rc->allowed_protos = RC_PROTO_BIT_NEC | 1910 RC_PROTO_BIT_NECX | RC_PROTO_BIT_NEC32; 1911 break; 1912 case 1: /* RC6 */ 1913 rc->allowed_protos = RC_PROTO_BIT_RC6_MCE; 1914 break; 1915 } 1916 1917 rc->query = af9035_rc_query; 1918 rc->interval = 500; 1919 1920 /* load empty to enable rc */ 1921 if (!rc->map_name) 1922 rc->map_name = RC_MAP_EMPTY; 1923 } 1924 1925 return 0; 1926 } 1927 #else 1928 #define af9035_get_rc_config NULL 1929 #endif 1930 1931 static int af9035_get_stream_config(struct dvb_frontend *fe, u8 *ts_type, 1932 struct usb_data_stream_properties *stream) 1933 { 1934 struct dvb_usb_device *d = fe_to_d(fe); 1935 struct usb_interface *intf = d->intf; 1936 1937 dev_dbg(&intf->dev, "adap=%d\n", fe_to_adap(fe)->id); 1938 1939 if (d->udev->speed == USB_SPEED_FULL) 1940 stream->u.bulk.buffersize = 5 * 188; 1941 1942 return 0; 1943 } 1944 1945 static int af9035_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) 1946 { 1947 struct state *state = adap_to_priv(adap); 1948 1949 return state->ops.pid_filter_ctrl(adap->fe[0], onoff); 1950 } 1951 1952 static int af9035_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, 1953 int onoff) 1954 { 1955 struct state *state = adap_to_priv(adap); 1956 1957 return state->ops.pid_filter(adap->fe[0], index, pid, onoff); 1958 } 1959 1960 static int af9035_probe(struct usb_interface *intf, 1961 const struct usb_device_id *id) 1962 { 1963 struct usb_device *udev = interface_to_usbdev(intf); 1964 char manufacturer[sizeof("Afatech")]; 1965 1966 memset(manufacturer, 0, sizeof(manufacturer)); 1967 usb_string(udev, udev->descriptor.iManufacturer, 1968 manufacturer, sizeof(manufacturer)); 1969 /* 1970 * There is two devices having same ID but different chipset. One uses 1971 * AF9015 and the other IT9135 chipset. Only difference seen on lsusb 1972 * is iManufacturer string. 1973 * 1974 * idVendor 0x0ccd TerraTec Electronic GmbH 1975 * idProduct 0x0099 1976 * bcdDevice 2.00 1977 * iManufacturer 1 Afatech 1978 * iProduct 2 DVB-T 2 1979 * 1980 * idVendor 0x0ccd TerraTec Electronic GmbH 1981 * idProduct 0x0099 1982 * bcdDevice 2.00 1983 * iManufacturer 1 ITE Technologies, Inc. 1984 * iProduct 2 DVB-T TV Stick 1985 */ 1986 if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VID_TERRATEC) && 1987 (le16_to_cpu(udev->descriptor.idProduct) == 0x0099)) { 1988 if (!strcmp("Afatech", manufacturer)) { 1989 dev_dbg(&udev->dev, "rejecting device\n"); 1990 return -ENODEV; 1991 } 1992 } 1993 1994 return dvb_usbv2_probe(intf, id); 1995 } 1996 1997 /* interface 0 is used by DVB-T receiver and 1998 interface 1 is for remote controller (HID) */ 1999 static const struct dvb_usb_device_properties af9035_props = { 2000 .driver_name = KBUILD_MODNAME, 2001 .owner = THIS_MODULE, 2002 .adapter_nr = adapter_nr, 2003 .size_of_priv = sizeof(struct state), 2004 2005 .generic_bulk_ctrl_endpoint = 0x02, 2006 .generic_bulk_ctrl_endpoint_response = 0x81, 2007 2008 .identify_state = af9035_identify_state, 2009 .download_firmware = af9035_download_firmware, 2010 2011 .i2c_algo = &af9035_i2c_algo, 2012 .read_config = af9035_read_config, 2013 .frontend_attach = af9035_frontend_attach, 2014 .frontend_detach = af9035_frontend_detach, 2015 .tuner_attach = af9035_tuner_attach, 2016 .tuner_detach = af9035_tuner_detach, 2017 .init = af9035_init, 2018 .get_rc_config = af9035_get_rc_config, 2019 .get_stream_config = af9035_get_stream_config, 2020 2021 .get_adapter_count = af9035_get_adapter_count, 2022 .adapter = { 2023 { 2024 .caps = DVB_USB_ADAP_HAS_PID_FILTER | 2025 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, 2026 2027 .pid_filter_count = 32, 2028 .pid_filter_ctrl = af9035_pid_filter_ctrl, 2029 .pid_filter = af9035_pid_filter, 2030 2031 .stream = DVB_USB_STREAM_BULK(0x84, 6, 87 * 188), 2032 }, { 2033 .caps = DVB_USB_ADAP_HAS_PID_FILTER | 2034 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, 2035 2036 .pid_filter_count = 32, 2037 .pid_filter_ctrl = af9035_pid_filter_ctrl, 2038 .pid_filter = af9035_pid_filter, 2039 2040 .stream = DVB_USB_STREAM_BULK(0x85, 6, 87 * 188), 2041 }, 2042 }, 2043 }; 2044 2045 static const struct dvb_usb_device_properties it930x_props = { 2046 .driver_name = KBUILD_MODNAME, 2047 .owner = THIS_MODULE, 2048 .adapter_nr = adapter_nr, 2049 .size_of_priv = sizeof(struct state), 2050 2051 .generic_bulk_ctrl_endpoint = 0x02, 2052 .generic_bulk_ctrl_endpoint_response = 0x81, 2053 2054 .identify_state = af9035_identify_state, 2055 .download_firmware = af9035_download_firmware, 2056 2057 .i2c_algo = &af9035_i2c_algo, 2058 .read_config = af9035_read_config, 2059 .frontend_attach = it930x_frontend_attach, 2060 .frontend_detach = af9035_frontend_detach, 2061 .tuner_attach = it930x_tuner_attach, 2062 .tuner_detach = it930x_tuner_detach, 2063 .init = it930x_init, 2064 .get_stream_config = af9035_get_stream_config, 2065 2066 .get_adapter_count = af9035_get_adapter_count, 2067 .adapter = { 2068 { 2069 .stream = DVB_USB_STREAM_BULK(0x84, 4, 816 * 188), 2070 }, { 2071 .stream = DVB_USB_STREAM_BULK(0x85, 4, 816 * 188), 2072 }, 2073 }, 2074 }; 2075 2076 static const struct usb_device_id af9035_id_table[] = { 2077 /* AF9035 devices */ 2078 { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_9035, 2079 &af9035_props, "Afatech AF9035 reference design", NULL) }, 2080 { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1000, 2081 &af9035_props, "Afatech AF9035 reference design", NULL) }, 2082 { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1001, 2083 &af9035_props, "Afatech AF9035 reference design", NULL) }, 2084 { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1002, 2085 &af9035_props, "Afatech AF9035 reference design", NULL) }, 2086 { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1003, 2087 &af9035_props, "Afatech AF9035 reference design", NULL) }, 2088 { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK, 2089 &af9035_props, "TerraTec Cinergy T Stick", NULL) }, 2090 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835, 2091 &af9035_props, "AVerMedia AVerTV Volar HD/PRO (A835)", NULL) }, 2092 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_B835, 2093 &af9035_props, "AVerMedia AVerTV Volar HD/PRO (A835)", NULL) }, 2094 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_1867, 2095 &af9035_props, "AVerMedia HD Volar (A867)", NULL) }, 2096 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A867, 2097 &af9035_props, "AVerMedia HD Volar (A867)", NULL) }, 2098 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TWINSTAR, 2099 &af9035_props, "AVerMedia Twinstar (A825)", NULL) }, 2100 { DVB_USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100MINI_PLUS, 2101 &af9035_props, "Asus U3100Mini Plus", NULL) }, 2102 { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00aa, 2103 &af9035_props, "TerraTec Cinergy T Stick (rev. 2)", NULL) }, 2104 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, 0x0337, 2105 &af9035_props, "AVerMedia HD Volar (A867)", NULL) }, 2106 { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_EVOLVEO_XTRATV_STICK, 2107 &af9035_props, "EVOLVEO XtraTV stick", NULL) }, 2108 2109 /* IT9135 devices */ 2110 { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135, 2111 &af9035_props, "ITE 9135 Generic", RC_MAP_IT913X_V1) }, 2112 { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9005, 2113 &af9035_props, "ITE 9135(9005) Generic", RC_MAP_IT913X_V2) }, 2114 { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9006, 2115 &af9035_props, "ITE 9135(9006) Generic", RC_MAP_IT913X_V1) }, 2116 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_1835, 2117 &af9035_props, "Avermedia A835B(1835)", RC_MAP_IT913X_V2) }, 2118 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_2835, 2119 &af9035_props, "Avermedia A835B(2835)", RC_MAP_IT913X_V2) }, 2120 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_3835, 2121 &af9035_props, "Avermedia A835B(3835)", RC_MAP_IT913X_V2) }, 2122 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_4835, 2123 &af9035_props, "Avermedia A835B(4835)", RC_MAP_IT913X_V2) }, 2124 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TD110, 2125 &af9035_props, "Avermedia AverTV Volar HD 2 (TD110)", RC_MAP_AVERMEDIA_RM_KS) }, 2126 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_H335, 2127 &af9035_props, "Avermedia H335", RC_MAP_IT913X_V2) }, 2128 { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB499_2T_T09, 2129 &af9035_props, "Kworld UB499-2T T09", RC_MAP_IT913X_V1) }, 2130 { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22_IT9137, 2131 &af9035_props, "Sveon STV22 Dual DVB-T HDTV", 2132 RC_MAP_IT913X_V1) }, 2133 { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CTVDIGDUAL_V2, 2134 &af9035_props, "Digital Dual TV Receiver CTVDIGDUAL_V2", 2135 RC_MAP_IT913X_V1) }, 2136 { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T1, 2137 &af9035_props, "TerraTec T1", RC_MAP_IT913X_V1) }, 2138 /* XXX: that same ID [0ccd:0099] is used by af9015 driver too */ 2139 { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x0099, 2140 &af9035_props, "TerraTec Cinergy T Stick Dual RC (rev. 2)", 2141 NULL) }, 2142 { DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a05, 2143 &af9035_props, "Leadtek WinFast DTV Dongle Dual", NULL) }, 2144 { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xf900, 2145 &af9035_props, "Hauppauge WinTV-MiniStick 2", NULL) }, 2146 { DVB_USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_78E, 2147 &af9035_props, "PCTV AndroiDTV (78e)", RC_MAP_IT913X_V1) }, 2148 { DVB_USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_79E, 2149 &af9035_props, "PCTV microStick (79e)", RC_MAP_IT913X_V2) }, 2150 2151 /* IT930x devices */ 2152 { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9303, 2153 &it930x_props, "ITE 9303 Generic", NULL) }, 2154 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TD310, 2155 &it930x_props, "AVerMedia TD310 DVB-T2", NULL) }, 2156 { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x0100, 2157 &it930x_props, "Logilink VG0022A", NULL) }, 2158 { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_TC2_STICK, 2159 &it930x_props, "TerraTec Cinergy TC2 Stick", NULL) }, 2160 { } 2161 }; 2162 MODULE_DEVICE_TABLE(usb, af9035_id_table); 2163 2164 static struct usb_driver af9035_usb_driver = { 2165 .name = KBUILD_MODNAME, 2166 .id_table = af9035_id_table, 2167 .probe = af9035_probe, 2168 .disconnect = dvb_usbv2_disconnect, 2169 .suspend = dvb_usbv2_suspend, 2170 .resume = dvb_usbv2_resume, 2171 .reset_resume = dvb_usbv2_reset_resume, 2172 .no_dynamic_id = 1, 2173 .soft_unbind = 1, 2174 }; 2175 2176 module_usb_driver(af9035_usb_driver); 2177 2178 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); 2179 MODULE_DESCRIPTION("Afatech AF9035 driver"); 2180 MODULE_LICENSE("GPL"); 2181 MODULE_FIRMWARE(AF9035_FIRMWARE_AF9035); 2182 MODULE_FIRMWARE(AF9035_FIRMWARE_IT9135_V1); 2183 MODULE_FIRMWARE(AF9035_FIRMWARE_IT9135_V2); 2184 MODULE_FIRMWARE(AF9035_FIRMWARE_IT9303); 2185