1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Afatech AF9035 DVB USB driver 4 * 5 * Copyright (C) 2009 Antti Palosaari <crope@iki.fi> 6 * Copyright (C) 2012 Antti Palosaari <crope@iki.fi> 7 */ 8 9 #include "af9035.h" 10 11 /* Max transfer size done by I2C transfer functions */ 12 #define MAX_XFER_SIZE 64 13 14 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); 15 16 static u16 af9035_checksum(const u8 *buf, size_t len) 17 { 18 size_t i; 19 u16 checksum = 0; 20 21 for (i = 1; i < len; i++) { 22 if (i % 2) 23 checksum += buf[i] << 8; 24 else 25 checksum += buf[i]; 26 } 27 checksum = ~checksum; 28 29 return checksum; 30 } 31 32 static int af9035_ctrl_msg(struct dvb_usb_device *d, struct usb_req *req) 33 { 34 #define REQ_HDR_LEN 4 /* send header size */ 35 #define ACK_HDR_LEN 3 /* rece header size */ 36 #define CHECKSUM_LEN 2 37 #define USB_TIMEOUT 2000 38 struct state *state = d_to_priv(d); 39 struct usb_interface *intf = d->intf; 40 int ret, wlen, rlen; 41 u16 checksum, tmp_checksum; 42 43 mutex_lock(&d->usb_mutex); 44 45 /* buffer overflow check */ 46 if (req->wlen > (BUF_LEN - REQ_HDR_LEN - CHECKSUM_LEN) || 47 req->rlen > (BUF_LEN - ACK_HDR_LEN - CHECKSUM_LEN)) { 48 dev_err(&intf->dev, "too much data wlen=%d rlen=%d\n", 49 req->wlen, req->rlen); 50 ret = -EINVAL; 51 goto exit; 52 } 53 54 state->buf[0] = REQ_HDR_LEN + req->wlen + CHECKSUM_LEN - 1; 55 state->buf[1] = req->mbox; 56 state->buf[2] = req->cmd; 57 state->buf[3] = state->seq++; 58 memcpy(&state->buf[REQ_HDR_LEN], req->wbuf, req->wlen); 59 60 wlen = REQ_HDR_LEN + req->wlen + CHECKSUM_LEN; 61 rlen = ACK_HDR_LEN + req->rlen + CHECKSUM_LEN; 62 63 /* calc and add checksum */ 64 checksum = af9035_checksum(state->buf, state->buf[0] - 1); 65 state->buf[state->buf[0] - 1] = (checksum >> 8); 66 state->buf[state->buf[0] - 0] = (checksum & 0xff); 67 68 /* no ack for these packets */ 69 if (req->cmd == CMD_FW_DL) 70 rlen = 0; 71 72 ret = dvb_usbv2_generic_rw_locked(d, 73 state->buf, wlen, state->buf, rlen); 74 if (ret) 75 goto exit; 76 77 /* no ack for those packets */ 78 if (req->cmd == CMD_FW_DL) 79 goto exit; 80 81 /* verify checksum */ 82 checksum = af9035_checksum(state->buf, rlen - 2); 83 tmp_checksum = (state->buf[rlen - 2] << 8) | state->buf[rlen - 1]; 84 if (tmp_checksum != checksum) { 85 dev_err(&intf->dev, "command=%02x checksum mismatch (%04x != %04x)\n", 86 req->cmd, tmp_checksum, checksum); 87 ret = -EIO; 88 goto exit; 89 } 90 91 /* check status */ 92 if (state->buf[2]) { 93 /* fw returns status 1 when IR code was not received */ 94 if (req->cmd == CMD_IR_GET || state->buf[2] == 1) { 95 ret = 1; 96 goto exit; 97 } 98 99 dev_dbg(&intf->dev, "command=%02x failed fw error=%d\n", 100 req->cmd, state->buf[2]); 101 ret = -EIO; 102 goto exit; 103 } 104 105 /* read request, copy returned data to return buf */ 106 if (req->rlen) 107 memcpy(req->rbuf, &state->buf[ACK_HDR_LEN], req->rlen); 108 exit: 109 mutex_unlock(&d->usb_mutex); 110 return ret; 111 } 112 113 /* write multiple registers */ 114 static int af9035_wr_regs(struct dvb_usb_device *d, u32 reg, u8 *val, int len) 115 { 116 struct usb_interface *intf = d->intf; 117 u8 wbuf[MAX_XFER_SIZE]; 118 u8 mbox = (reg >> 16) & 0xff; 119 struct usb_req req = { CMD_MEM_WR, mbox, 6 + len, wbuf, 0, NULL }; 120 121 if (6 + len > sizeof(wbuf)) { 122 dev_warn(&intf->dev, "i2c wr: len=%d is too big!\n", len); 123 return -EOPNOTSUPP; 124 } 125 126 wbuf[0] = len; 127 wbuf[1] = 2; 128 wbuf[2] = 0; 129 wbuf[3] = 0; 130 wbuf[4] = (reg >> 8) & 0xff; 131 wbuf[5] = (reg >> 0) & 0xff; 132 memcpy(&wbuf[6], val, len); 133 134 return af9035_ctrl_msg(d, &req); 135 } 136 137 /* read multiple registers */ 138 static int af9035_rd_regs(struct dvb_usb_device *d, u32 reg, u8 *val, int len) 139 { 140 u8 wbuf[] = { len, 2, 0, 0, (reg >> 8) & 0xff, reg & 0xff }; 141 u8 mbox = (reg >> 16) & 0xff; 142 struct usb_req req = { CMD_MEM_RD, mbox, sizeof(wbuf), wbuf, len, val }; 143 144 return af9035_ctrl_msg(d, &req); 145 } 146 147 /* write single register */ 148 static int af9035_wr_reg(struct dvb_usb_device *d, u32 reg, u8 val) 149 { 150 return af9035_wr_regs(d, reg, &val, 1); 151 } 152 153 /* read single register */ 154 static int af9035_rd_reg(struct dvb_usb_device *d, u32 reg, u8 *val) 155 { 156 return af9035_rd_regs(d, reg, val, 1); 157 } 158 159 /* write single register with mask */ 160 static int af9035_wr_reg_mask(struct dvb_usb_device *d, u32 reg, u8 val, 161 u8 mask) 162 { 163 int ret; 164 u8 tmp; 165 166 /* no need for read if whole reg is written */ 167 if (mask != 0xff) { 168 ret = af9035_rd_regs(d, reg, &tmp, 1); 169 if (ret) 170 return ret; 171 172 val &= mask; 173 tmp &= ~mask; 174 val |= tmp; 175 } 176 177 return af9035_wr_regs(d, reg, &val, 1); 178 } 179 180 static int af9035_add_i2c_dev(struct dvb_usb_device *d, const char *type, 181 u8 addr, void *platform_data, struct i2c_adapter *adapter) 182 { 183 int ret, num; 184 struct state *state = d_to_priv(d); 185 struct usb_interface *intf = d->intf; 186 struct i2c_client *client; 187 struct i2c_board_info board_info = { 188 .addr = addr, 189 .platform_data = platform_data, 190 }; 191 192 strscpy(board_info.type, type, I2C_NAME_SIZE); 193 194 /* find first free client */ 195 for (num = 0; num < AF9035_I2C_CLIENT_MAX; num++) { 196 if (state->i2c_client[num] == NULL) 197 break; 198 } 199 200 dev_dbg(&intf->dev, "num=%d\n", num); 201 202 if (num == AF9035_I2C_CLIENT_MAX) { 203 dev_err(&intf->dev, "I2C client out of index\n"); 204 ret = -ENODEV; 205 goto err; 206 } 207 208 request_module("%s", board_info.type); 209 210 /* register I2C device */ 211 client = i2c_new_client_device(adapter, &board_info); 212 if (!i2c_client_has_driver(client)) { 213 dev_err(&intf->dev, "failed to bind i2c device to %s driver\n", type); 214 ret = -ENODEV; 215 goto err; 216 } 217 218 /* increase I2C driver usage count */ 219 if (!try_module_get(client->dev.driver->owner)) { 220 i2c_unregister_device(client); 221 ret = -ENODEV; 222 goto err; 223 } 224 225 state->i2c_client[num] = client; 226 return 0; 227 err: 228 dev_dbg(&intf->dev, "failed=%d\n", ret); 229 return ret; 230 } 231 232 static void af9035_del_i2c_dev(struct dvb_usb_device *d) 233 { 234 int num; 235 struct state *state = d_to_priv(d); 236 struct usb_interface *intf = d->intf; 237 struct i2c_client *client; 238 239 /* find last used client */ 240 num = AF9035_I2C_CLIENT_MAX; 241 while (num--) { 242 if (state->i2c_client[num] != NULL) 243 break; 244 } 245 246 dev_dbg(&intf->dev, "num=%d\n", num); 247 248 if (num == -1) { 249 dev_err(&intf->dev, "I2C client out of index\n"); 250 goto err; 251 } 252 253 client = state->i2c_client[num]; 254 255 /* decrease I2C driver usage count */ 256 module_put(client->dev.driver->owner); 257 258 /* unregister I2C device */ 259 i2c_unregister_device(client); 260 261 state->i2c_client[num] = NULL; 262 return; 263 err: 264 dev_dbg(&intf->dev, "failed\n"); 265 } 266 267 static int af9035_i2c_master_xfer(struct i2c_adapter *adap, 268 struct i2c_msg msg[], int num) 269 { 270 struct dvb_usb_device *d = i2c_get_adapdata(adap); 271 struct state *state = d_to_priv(d); 272 int ret; 273 274 if (mutex_lock_interruptible(&d->i2c_mutex) < 0) 275 return -EAGAIN; 276 277 /* 278 * AF9035 I2C sub header is 5 bytes long. Meaning of those bytes are: 279 * 0: data len 280 * 1: I2C addr << 1 281 * 2: reg addr len 282 * byte 3 and 4 can be used as reg addr 283 * 3: reg addr MSB 284 * used when reg addr len is set to 2 285 * 4: reg addr LSB 286 * used when reg addr len is set to 1 or 2 287 * 288 * For the simplify we do not use register addr at all. 289 * NOTE: As a firmware knows tuner type there is very small possibility 290 * there could be some tuner I2C hacks done by firmware and this may 291 * lead problems if firmware expects those bytes are used. 292 * 293 * TODO: Here is few hacks. AF9035 chip integrates AF9033 demodulator. 294 * IT9135 chip integrates AF9033 demodulator and RF tuner. For dual 295 * tuner devices, there is also external AF9033 demodulator connected 296 * via external I2C bus. All AF9033 demod I2C traffic, both single and 297 * dual tuner configuration, is covered by firmware - actual USB IO 298 * looks just like a memory access. 299 * In case of IT913x chip, there is own tuner driver. It is implemented 300 * currently as a I2C driver, even tuner IP block is likely build 301 * directly into the demodulator memory space and there is no own I2C 302 * bus. I2C subsystem does not allow register multiple devices to same 303 * bus, having same slave address. Due to that we reuse demod address, 304 * shifted by one bit, on that case. 305 * 306 * For IT930x we use a different command and the sub header is 307 * different as well: 308 * 0: data len 309 * 1: I2C bus (0x03 seems to be only value used) 310 * 2: I2C addr << 1 311 */ 312 #define AF9035_IS_I2C_XFER_WRITE_READ(_msg, _num) \ 313 (_num == 2 && !(_msg[0].flags & I2C_M_RD) && (_msg[1].flags & I2C_M_RD)) 314 #define AF9035_IS_I2C_XFER_WRITE(_msg, _num) \ 315 (_num == 1 && !(_msg[0].flags & I2C_M_RD)) 316 #define AF9035_IS_I2C_XFER_READ(_msg, _num) \ 317 (_num == 1 && (_msg[0].flags & I2C_M_RD)) 318 319 if (AF9035_IS_I2C_XFER_WRITE_READ(msg, num)) { 320 if (msg[0].len > 40 || msg[1].len > 40) { 321 /* TODO: correct limits > 40 */ 322 ret = -EOPNOTSUPP; 323 } else if ((msg[0].addr == state->af9033_i2c_addr[0]) || 324 (msg[0].addr == state->af9033_i2c_addr[1])) { 325 /* demod access via firmware interface */ 326 u32 reg = msg[0].buf[0] << 16 | msg[0].buf[1] << 8 | 327 msg[0].buf[2]; 328 329 if (msg[0].addr == state->af9033_i2c_addr[1]) 330 reg |= 0x100000; 331 332 ret = af9035_rd_regs(d, reg, &msg[1].buf[0], 333 msg[1].len); 334 } else if (state->no_read) { 335 memset(msg[1].buf, 0, msg[1].len); 336 ret = 0; 337 } else { 338 /* I2C write + read */ 339 u8 buf[MAX_XFER_SIZE]; 340 struct usb_req req = { CMD_I2C_RD, 0, 5 + msg[0].len, 341 buf, msg[1].len, msg[1].buf }; 342 343 if (state->chip_type == 0x9306) { 344 req.cmd = CMD_GENERIC_I2C_RD; 345 req.wlen = 3 + msg[0].len; 346 } 347 req.mbox |= ((msg[0].addr & 0x80) >> 3); 348 349 buf[0] = msg[1].len; 350 if (state->chip_type == 0x9306) { 351 buf[1] = 0x03; /* I2C bus */ 352 buf[2] = msg[0].addr << 1; 353 memcpy(&buf[3], msg[0].buf, msg[0].len); 354 } else { 355 buf[1] = msg[0].addr << 1; 356 buf[3] = 0x00; /* reg addr MSB */ 357 buf[4] = 0x00; /* reg addr LSB */ 358 359 /* Keep prev behavior for write req len > 2*/ 360 if (msg[0].len > 2) { 361 buf[2] = 0x00; /* reg addr len */ 362 memcpy(&buf[5], msg[0].buf, msg[0].len); 363 364 /* Use reg addr fields if write req len <= 2 */ 365 } else { 366 req.wlen = 5; 367 buf[2] = msg[0].len; 368 if (msg[0].len == 2) { 369 buf[3] = msg[0].buf[0]; 370 buf[4] = msg[0].buf[1]; 371 } else if (msg[0].len == 1) { 372 buf[4] = msg[0].buf[0]; 373 } 374 } 375 } 376 ret = af9035_ctrl_msg(d, &req); 377 } 378 } else if (AF9035_IS_I2C_XFER_WRITE(msg, num)) { 379 if (msg[0].len > 40) { 380 /* TODO: correct limits > 40 */ 381 ret = -EOPNOTSUPP; 382 } else if ((msg[0].addr == state->af9033_i2c_addr[0]) || 383 (msg[0].addr == state->af9033_i2c_addr[1])) { 384 /* demod access via firmware interface */ 385 u32 reg = msg[0].buf[0] << 16 | msg[0].buf[1] << 8 | 386 msg[0].buf[2]; 387 388 if (msg[0].addr == state->af9033_i2c_addr[1]) 389 reg |= 0x100000; 390 391 ret = (msg[0].len >= 3) ? af9035_wr_regs(d, reg, 392 &msg[0].buf[3], 393 msg[0].len - 3) 394 : -EOPNOTSUPP; 395 } else { 396 /* I2C write */ 397 u8 buf[MAX_XFER_SIZE]; 398 struct usb_req req = { CMD_I2C_WR, 0, 5 + msg[0].len, 399 buf, 0, NULL }; 400 401 if (state->chip_type == 0x9306) { 402 req.cmd = CMD_GENERIC_I2C_WR; 403 req.wlen = 3 + msg[0].len; 404 } 405 406 req.mbox |= ((msg[0].addr & 0x80) >> 3); 407 buf[0] = msg[0].len; 408 if (state->chip_type == 0x9306) { 409 buf[1] = 0x03; /* I2C bus */ 410 buf[2] = msg[0].addr << 1; 411 memcpy(&buf[3], msg[0].buf, msg[0].len); 412 } else { 413 buf[1] = msg[0].addr << 1; 414 buf[2] = 0x00; /* reg addr len */ 415 buf[3] = 0x00; /* reg addr MSB */ 416 buf[4] = 0x00; /* reg addr LSB */ 417 memcpy(&buf[5], msg[0].buf, msg[0].len); 418 } 419 ret = af9035_ctrl_msg(d, &req); 420 } 421 } else if (AF9035_IS_I2C_XFER_READ(msg, num)) { 422 if (msg[0].len > 40) { 423 /* TODO: correct limits > 40 */ 424 ret = -EOPNOTSUPP; 425 } else if (state->no_read) { 426 memset(msg[0].buf, 0, msg[0].len); 427 ret = 0; 428 } else { 429 /* I2C read */ 430 u8 buf[5]; 431 struct usb_req req = { CMD_I2C_RD, 0, sizeof(buf), 432 buf, msg[0].len, msg[0].buf }; 433 434 if (state->chip_type == 0x9306) { 435 req.cmd = CMD_GENERIC_I2C_RD; 436 req.wlen = 3; 437 } 438 req.mbox |= ((msg[0].addr & 0x80) >> 3); 439 buf[0] = msg[0].len; 440 if (state->chip_type == 0x9306) { 441 buf[1] = 0x03; /* I2C bus */ 442 buf[2] = msg[0].addr << 1; 443 } else { 444 buf[1] = msg[0].addr << 1; 445 buf[2] = 0x00; /* reg addr len */ 446 buf[3] = 0x00; /* reg addr MSB */ 447 buf[4] = 0x00; /* reg addr LSB */ 448 } 449 ret = af9035_ctrl_msg(d, &req); 450 } 451 } else { 452 /* 453 * We support only three kind of I2C transactions: 454 * 1) 1 x write + 1 x read (repeated start) 455 * 2) 1 x write 456 * 3) 1 x read 457 */ 458 ret = -EOPNOTSUPP; 459 } 460 461 mutex_unlock(&d->i2c_mutex); 462 463 if (ret < 0) 464 return ret; 465 else 466 return num; 467 } 468 469 static u32 af9035_i2c_functionality(struct i2c_adapter *adapter) 470 { 471 return I2C_FUNC_I2C; 472 } 473 474 static struct i2c_algorithm af9035_i2c_algo = { 475 .master_xfer = af9035_i2c_master_xfer, 476 .functionality = af9035_i2c_functionality, 477 }; 478 479 static int af9035_identify_state(struct dvb_usb_device *d, const char **name) 480 { 481 struct state *state = d_to_priv(d); 482 struct usb_interface *intf = d->intf; 483 int ret, i, ts_mode_invalid; 484 unsigned int utmp, eeprom_addr; 485 u8 tmp; 486 u8 wbuf[1] = { 1 }; 487 u8 rbuf[4]; 488 struct usb_req req = { CMD_FW_QUERYINFO, 0, sizeof(wbuf), wbuf, 489 sizeof(rbuf), rbuf }; 490 491 ret = af9035_rd_regs(d, 0x1222, rbuf, 3); 492 if (ret < 0) 493 goto err; 494 495 state->chip_version = rbuf[0]; 496 state->chip_type = rbuf[2] << 8 | rbuf[1] << 0; 497 498 ret = af9035_rd_reg(d, 0x384f, &state->prechip_version); 499 if (ret < 0) 500 goto err; 501 502 dev_info(&intf->dev, "prechip_version=%02x chip_version=%02x chip_type=%04x\n", 503 state->prechip_version, state->chip_version, state->chip_type); 504 505 if (state->chip_type == 0x9135) { 506 if (state->chip_version == 0x02) { 507 *name = AF9035_FIRMWARE_IT9135_V2; 508 utmp = 0x00461d; 509 } else { 510 *name = AF9035_FIRMWARE_IT9135_V1; 511 utmp = 0x00461b; 512 } 513 514 /* Check if eeprom exists */ 515 ret = af9035_rd_reg(d, utmp, &tmp); 516 if (ret < 0) 517 goto err; 518 519 if (tmp == 0x00) { 520 dev_dbg(&intf->dev, "no eeprom\n"); 521 state->no_eeprom = true; 522 goto check_firmware_status; 523 } 524 525 eeprom_addr = EEPROM_BASE_IT9135; 526 } else if (state->chip_type == 0x9306) { 527 *name = AF9035_FIRMWARE_IT9303; 528 state->no_eeprom = true; 529 goto check_firmware_status; 530 } else { 531 *name = AF9035_FIRMWARE_AF9035; 532 eeprom_addr = EEPROM_BASE_AF9035; 533 } 534 535 /* Read and store eeprom */ 536 for (i = 0; i < 256; i += 32) { 537 ret = af9035_rd_regs(d, eeprom_addr + i, &state->eeprom[i], 32); 538 if (ret < 0) 539 goto err; 540 } 541 542 dev_dbg(&intf->dev, "eeprom dump:\n"); 543 for (i = 0; i < 256; i += 16) 544 dev_dbg(&intf->dev, "%*ph\n", 16, &state->eeprom[i]); 545 546 /* check for dual tuner mode */ 547 tmp = state->eeprom[EEPROM_TS_MODE]; 548 ts_mode_invalid = 0; 549 switch (tmp) { 550 case 0: 551 break; 552 case 1: 553 case 3: 554 state->dual_mode = true; 555 break; 556 case 5: 557 if (state->chip_type != 0x9135 && state->chip_type != 0x9306) 558 state->dual_mode = true; /* AF9035 */ 559 else 560 ts_mode_invalid = 1; 561 break; 562 default: 563 ts_mode_invalid = 1; 564 } 565 566 dev_dbg(&intf->dev, "ts mode=%d dual mode=%d\n", tmp, state->dual_mode); 567 568 if (ts_mode_invalid) 569 dev_info(&intf->dev, "ts mode=%d not supported, defaulting to single tuner mode!", tmp); 570 571 check_firmware_status: 572 ret = af9035_ctrl_msg(d, &req); 573 if (ret < 0) 574 goto err; 575 576 dev_dbg(&intf->dev, "reply=%*ph\n", 4, rbuf); 577 if (rbuf[0] || rbuf[1] || rbuf[2] || rbuf[3]) 578 ret = WARM; 579 else 580 ret = COLD; 581 582 return ret; 583 584 err: 585 dev_dbg(&intf->dev, "failed=%d\n", ret); 586 587 return ret; 588 } 589 590 static int af9035_download_firmware_old(struct dvb_usb_device *d, 591 const struct firmware *fw) 592 { 593 struct usb_interface *intf = d->intf; 594 int ret, i, j, len; 595 u8 wbuf[1]; 596 struct usb_req req = { 0, 0, 0, NULL, 0, NULL }; 597 struct usb_req req_fw_dl = { CMD_FW_DL, 0, 0, wbuf, 0, NULL }; 598 u8 hdr_core; 599 u16 hdr_addr, hdr_data_len, hdr_checksum; 600 #define MAX_DATA 58 601 #define HDR_SIZE 7 602 603 /* 604 * Thanks to Daniel Glöckner <daniel-gl@gmx.net> about that info! 605 * 606 * byte 0: MCS 51 core 607 * There are two inside the AF9035 (1=Link and 2=OFDM) with separate 608 * address spaces 609 * byte 1-2: Big endian destination address 610 * byte 3-4: Big endian number of data bytes following the header 611 * byte 5-6: Big endian header checksum, apparently ignored by the chip 612 * Calculated as ~(h[0]*256+h[1]+h[2]*256+h[3]+h[4]*256) 613 */ 614 615 for (i = fw->size; i > HDR_SIZE;) { 616 hdr_core = fw->data[fw->size - i + 0]; 617 hdr_addr = fw->data[fw->size - i + 1] << 8; 618 hdr_addr |= fw->data[fw->size - i + 2] << 0; 619 hdr_data_len = fw->data[fw->size - i + 3] << 8; 620 hdr_data_len |= fw->data[fw->size - i + 4] << 0; 621 hdr_checksum = fw->data[fw->size - i + 5] << 8; 622 hdr_checksum |= fw->data[fw->size - i + 6] << 0; 623 624 dev_dbg(&intf->dev, "core=%d addr=%04x data_len=%d checksum=%04x\n", 625 hdr_core, hdr_addr, hdr_data_len, hdr_checksum); 626 627 if (((hdr_core != 1) && (hdr_core != 2)) || 628 (hdr_data_len > i)) { 629 dev_dbg(&intf->dev, "bad firmware\n"); 630 break; 631 } 632 633 /* download begin packet */ 634 req.cmd = CMD_FW_DL_BEGIN; 635 ret = af9035_ctrl_msg(d, &req); 636 if (ret < 0) 637 goto err; 638 639 /* download firmware packet(s) */ 640 for (j = HDR_SIZE + hdr_data_len; j > 0; j -= MAX_DATA) { 641 len = j; 642 if (len > MAX_DATA) 643 len = MAX_DATA; 644 req_fw_dl.wlen = len; 645 req_fw_dl.wbuf = (u8 *) &fw->data[fw->size - i + 646 HDR_SIZE + hdr_data_len - j]; 647 ret = af9035_ctrl_msg(d, &req_fw_dl); 648 if (ret < 0) 649 goto err; 650 } 651 652 /* download end packet */ 653 req.cmd = CMD_FW_DL_END; 654 ret = af9035_ctrl_msg(d, &req); 655 if (ret < 0) 656 goto err; 657 658 i -= hdr_data_len + HDR_SIZE; 659 660 dev_dbg(&intf->dev, "data uploaded=%zu\n", fw->size - i); 661 } 662 663 /* print warn if firmware is bad, continue and see what happens */ 664 if (i) 665 dev_warn(&intf->dev, "bad firmware\n"); 666 667 return 0; 668 669 err: 670 dev_dbg(&intf->dev, "failed=%d\n", ret); 671 672 return ret; 673 } 674 675 static int af9035_download_firmware_new(struct dvb_usb_device *d, 676 const struct firmware *fw) 677 { 678 struct usb_interface *intf = d->intf; 679 int ret, i, i_prev; 680 struct usb_req req_fw_dl = { CMD_FW_SCATTER_WR, 0, 0, NULL, 0, NULL }; 681 #define HDR_SIZE 7 682 683 /* 684 * There seems to be following firmware header. Meaning of bytes 0-3 685 * is unknown. 686 * 687 * 0: 3 688 * 1: 0, 1 689 * 2: 0 690 * 3: 1, 2, 3 691 * 4: addr MSB 692 * 5: addr LSB 693 * 6: count of data bytes ? 694 */ 695 for (i = HDR_SIZE, i_prev = 0; i <= fw->size; i++) { 696 if (i == fw->size || 697 (fw->data[i + 0] == 0x03 && 698 (fw->data[i + 1] == 0x00 || 699 fw->data[i + 1] == 0x01) && 700 fw->data[i + 2] == 0x00)) { 701 req_fw_dl.wlen = i - i_prev; 702 req_fw_dl.wbuf = (u8 *) &fw->data[i_prev]; 703 i_prev = i; 704 ret = af9035_ctrl_msg(d, &req_fw_dl); 705 if (ret < 0) 706 goto err; 707 708 dev_dbg(&intf->dev, "data uploaded=%d\n", i); 709 } 710 } 711 712 return 0; 713 714 err: 715 dev_dbg(&intf->dev, "failed=%d\n", ret); 716 717 return ret; 718 } 719 720 static int af9035_download_firmware(struct dvb_usb_device *d, 721 const struct firmware *fw) 722 { 723 struct usb_interface *intf = d->intf; 724 struct state *state = d_to_priv(d); 725 int ret; 726 u8 wbuf[1]; 727 u8 rbuf[4]; 728 u8 tmp; 729 struct usb_req req = { 0, 0, 0, NULL, 0, NULL }; 730 struct usb_req req_fw_ver = { CMD_FW_QUERYINFO, 0, 1, wbuf, 4, rbuf }; 731 732 dev_dbg(&intf->dev, "\n"); 733 734 /* 735 * In case of dual tuner configuration we need to do some extra 736 * initialization in order to download firmware to slave demod too, 737 * which is done by master demod. 738 * Master feeds also clock and controls power via GPIO. 739 */ 740 if (state->dual_mode) { 741 /* configure gpioh1, reset & power slave demod */ 742 ret = af9035_wr_reg_mask(d, 0x00d8b0, 0x01, 0x01); 743 if (ret < 0) 744 goto err; 745 746 ret = af9035_wr_reg_mask(d, 0x00d8b1, 0x01, 0x01); 747 if (ret < 0) 748 goto err; 749 750 ret = af9035_wr_reg_mask(d, 0x00d8af, 0x00, 0x01); 751 if (ret < 0) 752 goto err; 753 754 usleep_range(10000, 50000); 755 756 ret = af9035_wr_reg_mask(d, 0x00d8af, 0x01, 0x01); 757 if (ret < 0) 758 goto err; 759 760 /* tell the slave I2C address */ 761 tmp = state->eeprom[EEPROM_2ND_DEMOD_ADDR]; 762 763 /* Use default I2C address if eeprom has no address set */ 764 if (!tmp) 765 tmp = 0x1d << 1; /* 8-bit format used by chip */ 766 767 if ((state->chip_type == 0x9135) || 768 (state->chip_type == 0x9306)) { 769 ret = af9035_wr_reg(d, 0x004bfb, tmp); 770 if (ret < 0) 771 goto err; 772 } else { 773 ret = af9035_wr_reg(d, 0x00417f, tmp); 774 if (ret < 0) 775 goto err; 776 777 /* enable clock out */ 778 ret = af9035_wr_reg_mask(d, 0x00d81a, 0x01, 0x01); 779 if (ret < 0) 780 goto err; 781 } 782 } 783 784 if (fw->data[0] == 0x01) 785 ret = af9035_download_firmware_old(d, fw); 786 else 787 ret = af9035_download_firmware_new(d, fw); 788 if (ret < 0) 789 goto err; 790 791 /* firmware loaded, request boot */ 792 req.cmd = CMD_FW_BOOT; 793 ret = af9035_ctrl_msg(d, &req); 794 if (ret < 0) 795 goto err; 796 797 /* ensure firmware starts */ 798 wbuf[0] = 1; 799 ret = af9035_ctrl_msg(d, &req_fw_ver); 800 if (ret < 0) 801 goto err; 802 803 if (!(rbuf[0] || rbuf[1] || rbuf[2] || rbuf[3])) { 804 dev_err(&intf->dev, "firmware did not run\n"); 805 ret = -ENODEV; 806 goto err; 807 } 808 809 dev_info(&intf->dev, "firmware version=%d.%d.%d.%d", 810 rbuf[0], rbuf[1], rbuf[2], rbuf[3]); 811 812 return 0; 813 814 err: 815 dev_dbg(&intf->dev, "failed=%d\n", ret); 816 817 return ret; 818 } 819 820 static int af9035_read_config(struct dvb_usb_device *d) 821 { 822 struct usb_interface *intf = d->intf; 823 struct state *state = d_to_priv(d); 824 int ret, i; 825 u8 tmp; 826 u16 tmp16; 827 828 /* Demod I2C address */ 829 state->af9033_i2c_addr[0] = 0x1c; 830 state->af9033_i2c_addr[1] = 0x1d; 831 state->af9033_config[0].adc_multiplier = AF9033_ADC_MULTIPLIER_2X; 832 state->af9033_config[1].adc_multiplier = AF9033_ADC_MULTIPLIER_2X; 833 state->af9033_config[0].ts_mode = AF9033_TS_MODE_USB; 834 state->af9033_config[1].ts_mode = AF9033_TS_MODE_SERIAL; 835 state->it930x_addresses = 0; 836 837 if (state->chip_type == 0x9135) { 838 /* feed clock for integrated RF tuner */ 839 state->af9033_config[0].dyn0_clk = true; 840 state->af9033_config[1].dyn0_clk = true; 841 842 if (state->chip_version == 0x02) { 843 state->af9033_config[0].tuner = AF9033_TUNER_IT9135_60; 844 state->af9033_config[1].tuner = AF9033_TUNER_IT9135_60; 845 } else { 846 state->af9033_config[0].tuner = AF9033_TUNER_IT9135_38; 847 state->af9033_config[1].tuner = AF9033_TUNER_IT9135_38; 848 } 849 850 if (state->no_eeprom) { 851 /* Remote controller to NEC polling by default */ 852 state->ir_mode = 0x05; 853 state->ir_type = 0x00; 854 855 goto skip_eeprom; 856 } 857 } else if (state->chip_type == 0x9306) { 858 /* 859 * IT930x is an USB bridge, only single demod-single tuner 860 * configurations seen so far. 861 */ 862 if ((le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_AVERMEDIA) && 863 (le16_to_cpu(d->udev->descriptor.idProduct) == USB_PID_AVERMEDIA_TD310)) { 864 state->it930x_addresses = 1; 865 } 866 return 0; 867 } 868 869 /* Remote controller */ 870 state->ir_mode = state->eeprom[EEPROM_IR_MODE]; 871 state->ir_type = state->eeprom[EEPROM_IR_TYPE]; 872 873 if (state->dual_mode) { 874 /* Read 2nd demodulator I2C address. 8-bit format on eeprom */ 875 tmp = state->eeprom[EEPROM_2ND_DEMOD_ADDR]; 876 if (tmp) 877 state->af9033_i2c_addr[1] = tmp >> 1; 878 879 dev_dbg(&intf->dev, "2nd demod I2C addr=%02x\n", 880 state->af9033_i2c_addr[1]); 881 } 882 883 for (i = 0; i < state->dual_mode + 1; i++) { 884 unsigned int eeprom_offset = 0; 885 886 /* tuner */ 887 tmp = state->eeprom[EEPROM_1_TUNER_ID + eeprom_offset]; 888 dev_dbg(&intf->dev, "[%d]tuner=%02x\n", i, tmp); 889 890 /* tuner sanity check */ 891 if (state->chip_type == 0x9135) { 892 if (state->chip_version == 0x02) { 893 /* IT9135 BX (v2) */ 894 switch (tmp) { 895 case AF9033_TUNER_IT9135_60: 896 case AF9033_TUNER_IT9135_61: 897 case AF9033_TUNER_IT9135_62: 898 state->af9033_config[i].tuner = tmp; 899 break; 900 } 901 } else { 902 /* IT9135 AX (v1) */ 903 switch (tmp) { 904 case AF9033_TUNER_IT9135_38: 905 case AF9033_TUNER_IT9135_51: 906 case AF9033_TUNER_IT9135_52: 907 state->af9033_config[i].tuner = tmp; 908 break; 909 } 910 } 911 } else { 912 /* AF9035 */ 913 state->af9033_config[i].tuner = tmp; 914 } 915 916 if (state->af9033_config[i].tuner != tmp) { 917 dev_info(&intf->dev, "[%d] overriding tuner from %02x to %02x\n", 918 i, tmp, state->af9033_config[i].tuner); 919 } 920 921 switch (state->af9033_config[i].tuner) { 922 case AF9033_TUNER_TUA9001: 923 case AF9033_TUNER_FC0011: 924 case AF9033_TUNER_MXL5007T: 925 case AF9033_TUNER_TDA18218: 926 case AF9033_TUNER_FC2580: 927 case AF9033_TUNER_FC0012: 928 state->af9033_config[i].spec_inv = 1; 929 break; 930 case AF9033_TUNER_IT9135_38: 931 case AF9033_TUNER_IT9135_51: 932 case AF9033_TUNER_IT9135_52: 933 case AF9033_TUNER_IT9135_60: 934 case AF9033_TUNER_IT9135_61: 935 case AF9033_TUNER_IT9135_62: 936 break; 937 default: 938 dev_warn(&intf->dev, "tuner id=%02x not supported, please report!", 939 tmp); 940 } 941 942 /* disable dual mode if driver does not support it */ 943 if (i == 1) 944 switch (state->af9033_config[i].tuner) { 945 case AF9033_TUNER_FC0012: 946 case AF9033_TUNER_IT9135_38: 947 case AF9033_TUNER_IT9135_51: 948 case AF9033_TUNER_IT9135_52: 949 case AF9033_TUNER_IT9135_60: 950 case AF9033_TUNER_IT9135_61: 951 case AF9033_TUNER_IT9135_62: 952 case AF9033_TUNER_MXL5007T: 953 break; 954 default: 955 state->dual_mode = false; 956 dev_info(&intf->dev, "driver does not support 2nd tuner and will disable it"); 957 } 958 959 /* tuner IF frequency */ 960 tmp = state->eeprom[EEPROM_1_IF_L + eeprom_offset]; 961 tmp16 = tmp << 0; 962 tmp = state->eeprom[EEPROM_1_IF_H + eeprom_offset]; 963 tmp16 |= tmp << 8; 964 dev_dbg(&intf->dev, "[%d]IF=%d\n", i, tmp16); 965 966 eeprom_offset += 0x10; /* shift for the 2nd tuner params */ 967 } 968 969 skip_eeprom: 970 /* get demod clock */ 971 ret = af9035_rd_reg(d, 0x00d800, &tmp); 972 if (ret < 0) 973 goto err; 974 975 tmp = (tmp >> 0) & 0x0f; 976 977 for (i = 0; i < ARRAY_SIZE(state->af9033_config); i++) { 978 if (state->chip_type == 0x9135) 979 state->af9033_config[i].clock = clock_lut_it9135[tmp]; 980 else 981 state->af9033_config[i].clock = clock_lut_af9035[tmp]; 982 } 983 984 state->no_read = false; 985 /* Some MXL5007T devices cannot properly handle tuner I2C read ops. */ 986 if (state->af9033_config[0].tuner == AF9033_TUNER_MXL5007T && 987 le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_AVERMEDIA) 988 989 switch (le16_to_cpu(d->udev->descriptor.idProduct)) { 990 case USB_PID_AVERMEDIA_A867: 991 case USB_PID_AVERMEDIA_TWINSTAR: 992 dev_info(&intf->dev, 993 "Device may have issues with I2C read operations. Enabling fix.\n"); 994 state->no_read = true; 995 break; 996 } 997 998 return 0; 999 1000 err: 1001 dev_dbg(&intf->dev, "failed=%d\n", ret); 1002 1003 return ret; 1004 } 1005 1006 static int af9035_tua9001_tuner_callback(struct dvb_usb_device *d, 1007 int cmd, int arg) 1008 { 1009 struct usb_interface *intf = d->intf; 1010 int ret; 1011 u8 val; 1012 1013 dev_dbg(&intf->dev, "cmd=%d arg=%d\n", cmd, arg); 1014 1015 /* 1016 * CEN always enabled by hardware wiring 1017 * RESETN GPIOT3 1018 * RXEN GPIOT2 1019 */ 1020 1021 switch (cmd) { 1022 case TUA9001_CMD_RESETN: 1023 if (arg) 1024 val = 0x00; 1025 else 1026 val = 0x01; 1027 1028 ret = af9035_wr_reg_mask(d, 0x00d8e7, val, 0x01); 1029 if (ret < 0) 1030 goto err; 1031 break; 1032 case TUA9001_CMD_RXEN: 1033 if (arg) 1034 val = 0x01; 1035 else 1036 val = 0x00; 1037 1038 ret = af9035_wr_reg_mask(d, 0x00d8eb, val, 0x01); 1039 if (ret < 0) 1040 goto err; 1041 break; 1042 } 1043 1044 return 0; 1045 1046 err: 1047 dev_dbg(&intf->dev, "failed=%d\n", ret); 1048 1049 return ret; 1050 } 1051 1052 1053 static int af9035_fc0011_tuner_callback(struct dvb_usb_device *d, 1054 int cmd, int arg) 1055 { 1056 struct usb_interface *intf = d->intf; 1057 int ret; 1058 1059 switch (cmd) { 1060 case FC0011_FE_CALLBACK_POWER: 1061 /* Tuner enable */ 1062 ret = af9035_wr_reg_mask(d, 0xd8eb, 1, 1); 1063 if (ret < 0) 1064 goto err; 1065 1066 ret = af9035_wr_reg_mask(d, 0xd8ec, 1, 1); 1067 if (ret < 0) 1068 goto err; 1069 1070 ret = af9035_wr_reg_mask(d, 0xd8ed, 1, 1); 1071 if (ret < 0) 1072 goto err; 1073 1074 /* LED */ 1075 ret = af9035_wr_reg_mask(d, 0xd8d0, 1, 1); 1076 if (ret < 0) 1077 goto err; 1078 1079 ret = af9035_wr_reg_mask(d, 0xd8d1, 1, 1); 1080 if (ret < 0) 1081 goto err; 1082 1083 usleep_range(10000, 50000); 1084 break; 1085 case FC0011_FE_CALLBACK_RESET: 1086 ret = af9035_wr_reg(d, 0xd8e9, 1); 1087 if (ret < 0) 1088 goto err; 1089 1090 ret = af9035_wr_reg(d, 0xd8e8, 1); 1091 if (ret < 0) 1092 goto err; 1093 1094 ret = af9035_wr_reg(d, 0xd8e7, 1); 1095 if (ret < 0) 1096 goto err; 1097 1098 usleep_range(10000, 20000); 1099 1100 ret = af9035_wr_reg(d, 0xd8e7, 0); 1101 if (ret < 0) 1102 goto err; 1103 1104 usleep_range(10000, 20000); 1105 break; 1106 default: 1107 ret = -EINVAL; 1108 goto err; 1109 } 1110 1111 return 0; 1112 1113 err: 1114 dev_dbg(&intf->dev, "failed=%d\n", ret); 1115 1116 return ret; 1117 } 1118 1119 static int af9035_tuner_callback(struct dvb_usb_device *d, int cmd, int arg) 1120 { 1121 struct state *state = d_to_priv(d); 1122 1123 switch (state->af9033_config[0].tuner) { 1124 case AF9033_TUNER_FC0011: 1125 return af9035_fc0011_tuner_callback(d, cmd, arg); 1126 case AF9033_TUNER_TUA9001: 1127 return af9035_tua9001_tuner_callback(d, cmd, arg); 1128 default: 1129 break; 1130 } 1131 1132 return 0; 1133 } 1134 1135 static int af9035_frontend_callback(void *adapter_priv, int component, 1136 int cmd, int arg) 1137 { 1138 struct i2c_adapter *adap = adapter_priv; 1139 struct dvb_usb_device *d = i2c_get_adapdata(adap); 1140 struct usb_interface *intf = d->intf; 1141 1142 dev_dbg(&intf->dev, "component=%d cmd=%d arg=%d\n", 1143 component, cmd, arg); 1144 1145 switch (component) { 1146 case DVB_FRONTEND_COMPONENT_TUNER: 1147 return af9035_tuner_callback(d, cmd, arg); 1148 default: 1149 break; 1150 } 1151 1152 return 0; 1153 } 1154 1155 static int af9035_get_adapter_count(struct dvb_usb_device *d) 1156 { 1157 struct state *state = d_to_priv(d); 1158 1159 return state->dual_mode + 1; 1160 } 1161 1162 static int af9035_frontend_attach(struct dvb_usb_adapter *adap) 1163 { 1164 struct state *state = adap_to_priv(adap); 1165 struct dvb_usb_device *d = adap_to_d(adap); 1166 struct usb_interface *intf = d->intf; 1167 int ret; 1168 1169 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1170 1171 if (!state->af9033_config[adap->id].tuner) { 1172 /* unsupported tuner */ 1173 ret = -ENODEV; 1174 goto err; 1175 } 1176 1177 state->af9033_config[adap->id].fe = &adap->fe[0]; 1178 state->af9033_config[adap->id].ops = &state->ops; 1179 ret = af9035_add_i2c_dev(d, "af9033", state->af9033_i2c_addr[adap->id], 1180 &state->af9033_config[adap->id], &d->i2c_adap); 1181 if (ret) 1182 goto err; 1183 1184 if (adap->fe[0] == NULL) { 1185 ret = -ENODEV; 1186 goto err; 1187 } 1188 1189 /* disable I2C-gate */ 1190 adap->fe[0]->ops.i2c_gate_ctrl = NULL; 1191 adap->fe[0]->callback = af9035_frontend_callback; 1192 1193 return 0; 1194 1195 err: 1196 dev_dbg(&intf->dev, "failed=%d\n", ret); 1197 1198 return ret; 1199 } 1200 1201 /* 1202 * The I2C speed register is calculated with: 1203 * I2C speed register = (1000000000 / (24.4 * 16 * I2C_speed)) 1204 * 1205 * The default speed register for it930x is 7, with means a 1206 * speed of ~366 kbps 1207 */ 1208 #define I2C_SPEED_366K 7 1209 1210 static int it930x_frontend_attach(struct dvb_usb_adapter *adap) 1211 { 1212 struct state *state = adap_to_priv(adap); 1213 struct dvb_usb_device *d = adap_to_d(adap); 1214 struct usb_interface *intf = d->intf; 1215 int ret; 1216 struct si2168_config si2168_config; 1217 struct i2c_adapter *adapter; 1218 1219 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1220 1221 /* I2C master bus 2 clock speed 366k */ 1222 ret = af9035_wr_reg(d, 0x00f6a7, I2C_SPEED_366K); 1223 if (ret < 0) 1224 goto err; 1225 1226 /* I2C master bus 1,3 clock speed 366k */ 1227 ret = af9035_wr_reg(d, 0x00f103, I2C_SPEED_366K); 1228 if (ret < 0) 1229 goto err; 1230 1231 /* set gpio11 low */ 1232 ret = af9035_wr_reg_mask(d, 0xd8d4, 0x01, 0x01); 1233 if (ret < 0) 1234 goto err; 1235 1236 ret = af9035_wr_reg_mask(d, 0xd8d5, 0x01, 0x01); 1237 if (ret < 0) 1238 goto err; 1239 1240 ret = af9035_wr_reg_mask(d, 0xd8d3, 0x01, 0x01); 1241 if (ret < 0) 1242 goto err; 1243 1244 /* Tuner enable using gpiot2_en, gpiot2_on and gpiot2_o (reset) */ 1245 ret = af9035_wr_reg_mask(d, 0xd8b8, 0x01, 0x01); 1246 if (ret < 0) 1247 goto err; 1248 1249 ret = af9035_wr_reg_mask(d, 0xd8b9, 0x01, 0x01); 1250 if (ret < 0) 1251 goto err; 1252 1253 ret = af9035_wr_reg_mask(d, 0xd8b7, 0x00, 0x01); 1254 if (ret < 0) 1255 goto err; 1256 1257 msleep(200); 1258 1259 ret = af9035_wr_reg_mask(d, 0xd8b7, 0x01, 0x01); 1260 if (ret < 0) 1261 goto err; 1262 1263 memset(&si2168_config, 0, sizeof(si2168_config)); 1264 si2168_config.i2c_adapter = &adapter; 1265 si2168_config.fe = &adap->fe[0]; 1266 si2168_config.ts_mode = SI2168_TS_SERIAL; 1267 1268 state->af9033_config[adap->id].fe = &adap->fe[0]; 1269 state->af9033_config[adap->id].ops = &state->ops; 1270 ret = af9035_add_i2c_dev(d, "si2168", 1271 it930x_addresses_table[state->it930x_addresses].frontend_i2c_addr, 1272 &si2168_config, &d->i2c_adap); 1273 if (ret) 1274 goto err; 1275 1276 if (adap->fe[0] == NULL) { 1277 ret = -ENODEV; 1278 goto err; 1279 } 1280 state->i2c_adapter_demod = adapter; 1281 1282 return 0; 1283 1284 err: 1285 dev_dbg(&intf->dev, "failed=%d\n", ret); 1286 1287 return ret; 1288 } 1289 1290 static int af9035_frontend_detach(struct dvb_usb_adapter *adap) 1291 { 1292 struct state *state = adap_to_priv(adap); 1293 struct dvb_usb_device *d = adap_to_d(adap); 1294 struct usb_interface *intf = d->intf; 1295 1296 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1297 1298 if (adap->id == 1) { 1299 if (state->i2c_client[1]) 1300 af9035_del_i2c_dev(d); 1301 } else if (adap->id == 0) { 1302 if (state->i2c_client[0]) 1303 af9035_del_i2c_dev(d); 1304 } 1305 1306 return 0; 1307 } 1308 1309 static const struct fc0011_config af9035_fc0011_config = { 1310 .i2c_address = 0x60, 1311 }; 1312 1313 static struct mxl5007t_config af9035_mxl5007t_config[] = { 1314 { 1315 .xtal_freq_hz = MxL_XTAL_24_MHZ, 1316 .if_freq_hz = MxL_IF_4_57_MHZ, 1317 .invert_if = 0, 1318 .loop_thru_enable = 0, 1319 .clk_out_enable = 0, 1320 .clk_out_amp = MxL_CLKOUT_AMP_0_94V, 1321 }, { 1322 .xtal_freq_hz = MxL_XTAL_24_MHZ, 1323 .if_freq_hz = MxL_IF_4_57_MHZ, 1324 .invert_if = 0, 1325 .loop_thru_enable = 1, 1326 .clk_out_enable = 1, 1327 .clk_out_amp = MxL_CLKOUT_AMP_0_94V, 1328 } 1329 }; 1330 1331 static struct tda18218_config af9035_tda18218_config = { 1332 .i2c_address = 0x60, 1333 .i2c_wr_max = 21, 1334 }; 1335 1336 static const struct fc0012_config af9035_fc0012_config[] = { 1337 { 1338 .i2c_address = 0x63, 1339 .xtal_freq = FC_XTAL_36_MHZ, 1340 .dual_master = true, 1341 .loop_through = true, 1342 .clock_out = true, 1343 }, { 1344 .i2c_address = 0x63 | 0x80, /* I2C bus select hack */ 1345 .xtal_freq = FC_XTAL_36_MHZ, 1346 .dual_master = true, 1347 } 1348 }; 1349 1350 static int af9035_tuner_attach(struct dvb_usb_adapter *adap) 1351 { 1352 struct state *state = adap_to_priv(adap); 1353 struct dvb_usb_device *d = adap_to_d(adap); 1354 struct usb_interface *intf = d->intf; 1355 int ret; 1356 struct dvb_frontend *fe; 1357 struct i2c_msg msg[1]; 1358 u8 tuner_addr; 1359 1360 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1361 1362 /* 1363 * XXX: Hack used in that function: we abuse unused I2C address bit [7] 1364 * to carry info about used I2C bus for dual tuner configuration. 1365 */ 1366 1367 switch (state->af9033_config[adap->id].tuner) { 1368 case AF9033_TUNER_TUA9001: { 1369 struct tua9001_platform_data tua9001_pdata = { 1370 .dvb_frontend = adap->fe[0], 1371 }; 1372 1373 /* 1374 * AF9035 gpiot3 = TUA9001 RESETN 1375 * AF9035 gpiot2 = TUA9001 RXEN 1376 */ 1377 1378 /* configure gpiot2 and gpiot2 as output */ 1379 ret = af9035_wr_reg_mask(d, 0x00d8ec, 0x01, 0x01); 1380 if (ret < 0) 1381 goto err; 1382 1383 ret = af9035_wr_reg_mask(d, 0x00d8ed, 0x01, 0x01); 1384 if (ret < 0) 1385 goto err; 1386 1387 ret = af9035_wr_reg_mask(d, 0x00d8e8, 0x01, 0x01); 1388 if (ret < 0) 1389 goto err; 1390 1391 ret = af9035_wr_reg_mask(d, 0x00d8e9, 0x01, 0x01); 1392 if (ret < 0) 1393 goto err; 1394 1395 /* attach tuner */ 1396 ret = af9035_add_i2c_dev(d, "tua9001", 0x60, &tua9001_pdata, 1397 &d->i2c_adap); 1398 if (ret) 1399 goto err; 1400 1401 fe = adap->fe[0]; 1402 break; 1403 } 1404 case AF9033_TUNER_FC0011: 1405 fe = dvb_attach(fc0011_attach, adap->fe[0], 1406 &d->i2c_adap, &af9035_fc0011_config); 1407 break; 1408 case AF9033_TUNER_MXL5007T: 1409 if (adap->id == 0) { 1410 ret = af9035_wr_reg(d, 0x00d8e0, 1); 1411 if (ret < 0) 1412 goto err; 1413 1414 ret = af9035_wr_reg(d, 0x00d8e1, 1); 1415 if (ret < 0) 1416 goto err; 1417 1418 ret = af9035_wr_reg(d, 0x00d8df, 0); 1419 if (ret < 0) 1420 goto err; 1421 1422 msleep(30); 1423 1424 ret = af9035_wr_reg(d, 0x00d8df, 1); 1425 if (ret < 0) 1426 goto err; 1427 1428 msleep(300); 1429 1430 ret = af9035_wr_reg(d, 0x00d8c0, 1); 1431 if (ret < 0) 1432 goto err; 1433 1434 ret = af9035_wr_reg(d, 0x00d8c1, 1); 1435 if (ret < 0) 1436 goto err; 1437 1438 ret = af9035_wr_reg(d, 0x00d8bf, 0); 1439 if (ret < 0) 1440 goto err; 1441 1442 ret = af9035_wr_reg(d, 0x00d8b4, 1); 1443 if (ret < 0) 1444 goto err; 1445 1446 ret = af9035_wr_reg(d, 0x00d8b5, 1); 1447 if (ret < 0) 1448 goto err; 1449 1450 ret = af9035_wr_reg(d, 0x00d8b3, 1); 1451 if (ret < 0) 1452 goto err; 1453 1454 tuner_addr = 0x60; 1455 } else { 1456 tuner_addr = 0x60 | 0x80; /* I2C bus hack */ 1457 } 1458 1459 /* attach tuner */ 1460 fe = dvb_attach(mxl5007t_attach, adap->fe[0], &d->i2c_adap, 1461 tuner_addr, &af9035_mxl5007t_config[adap->id]); 1462 break; 1463 case AF9033_TUNER_TDA18218: 1464 /* attach tuner */ 1465 fe = dvb_attach(tda18218_attach, adap->fe[0], 1466 &d->i2c_adap, &af9035_tda18218_config); 1467 break; 1468 case AF9033_TUNER_FC2580: { 1469 struct fc2580_platform_data fc2580_pdata = { 1470 .dvb_frontend = adap->fe[0], 1471 }; 1472 1473 /* Tuner enable using gpiot2_o, gpiot2_en and gpiot2_on */ 1474 ret = af9035_wr_reg_mask(d, 0xd8eb, 0x01, 0x01); 1475 if (ret < 0) 1476 goto err; 1477 1478 ret = af9035_wr_reg_mask(d, 0xd8ec, 0x01, 0x01); 1479 if (ret < 0) 1480 goto err; 1481 1482 ret = af9035_wr_reg_mask(d, 0xd8ed, 0x01, 0x01); 1483 if (ret < 0) 1484 goto err; 1485 1486 usleep_range(10000, 50000); 1487 /* attach tuner */ 1488 ret = af9035_add_i2c_dev(d, "fc2580", 0x56, &fc2580_pdata, 1489 &d->i2c_adap); 1490 if (ret) 1491 goto err; 1492 1493 fe = adap->fe[0]; 1494 break; 1495 } 1496 case AF9033_TUNER_FC0012: 1497 /* 1498 * AF9035 gpiot2 = FC0012 enable 1499 * XXX: there seems to be something on gpioh8 too, but on my 1500 * test I didn't find any difference. 1501 */ 1502 1503 if (adap->id == 0) { 1504 /* configure gpiot2 as output and high */ 1505 ret = af9035_wr_reg_mask(d, 0xd8eb, 0x01, 0x01); 1506 if (ret < 0) 1507 goto err; 1508 1509 ret = af9035_wr_reg_mask(d, 0xd8ec, 0x01, 0x01); 1510 if (ret < 0) 1511 goto err; 1512 1513 ret = af9035_wr_reg_mask(d, 0xd8ed, 0x01, 0x01); 1514 if (ret < 0) 1515 goto err; 1516 } else { 1517 /* 1518 * FIXME: That belongs for the FC0012 driver. 1519 * Write 02 to FC0012 master tuner register 0d directly 1520 * in order to make slave tuner working. 1521 */ 1522 msg[0].addr = 0x63; 1523 msg[0].flags = 0; 1524 msg[0].len = 2; 1525 msg[0].buf = "\x0d\x02"; 1526 ret = i2c_transfer(&d->i2c_adap, msg, 1); 1527 if (ret < 0) 1528 goto err; 1529 } 1530 1531 usleep_range(10000, 50000); 1532 1533 fe = dvb_attach(fc0012_attach, adap->fe[0], &d->i2c_adap, 1534 &af9035_fc0012_config[adap->id]); 1535 break; 1536 case AF9033_TUNER_IT9135_38: 1537 case AF9033_TUNER_IT9135_51: 1538 case AF9033_TUNER_IT9135_52: 1539 case AF9033_TUNER_IT9135_60: 1540 case AF9033_TUNER_IT9135_61: 1541 case AF9033_TUNER_IT9135_62: 1542 { 1543 struct platform_device *pdev; 1544 const char *name; 1545 struct it913x_platform_data it913x_pdata = { 1546 .regmap = state->af9033_config[adap->id].regmap, 1547 .fe = adap->fe[0], 1548 }; 1549 1550 switch (state->af9033_config[adap->id].tuner) { 1551 case AF9033_TUNER_IT9135_38: 1552 case AF9033_TUNER_IT9135_51: 1553 case AF9033_TUNER_IT9135_52: 1554 name = "it9133ax-tuner"; 1555 break; 1556 case AF9033_TUNER_IT9135_60: 1557 case AF9033_TUNER_IT9135_61: 1558 case AF9033_TUNER_IT9135_62: 1559 name = "it9133bx-tuner"; 1560 break; 1561 default: 1562 ret = -ENODEV; 1563 goto err; 1564 } 1565 1566 if (state->dual_mode) { 1567 if (adap->id == 0) 1568 it913x_pdata.role = IT913X_ROLE_DUAL_MASTER; 1569 else 1570 it913x_pdata.role = IT913X_ROLE_DUAL_SLAVE; 1571 } else { 1572 it913x_pdata.role = IT913X_ROLE_SINGLE; 1573 } 1574 1575 request_module("%s", "it913x"); 1576 pdev = platform_device_register_data(&d->intf->dev, name, 1577 PLATFORM_DEVID_AUTO, 1578 &it913x_pdata, 1579 sizeof(it913x_pdata)); 1580 if (IS_ERR(pdev) || !pdev->dev.driver) { 1581 ret = -ENODEV; 1582 goto err; 1583 } 1584 if (!try_module_get(pdev->dev.driver->owner)) { 1585 platform_device_unregister(pdev); 1586 ret = -ENODEV; 1587 goto err; 1588 } 1589 1590 state->platform_device_tuner[adap->id] = pdev; 1591 fe = adap->fe[0]; 1592 break; 1593 } 1594 default: 1595 fe = NULL; 1596 } 1597 1598 if (fe == NULL) { 1599 ret = -ENODEV; 1600 goto err; 1601 } 1602 1603 return 0; 1604 1605 err: 1606 dev_dbg(&intf->dev, "failed=%d\n", ret); 1607 1608 return ret; 1609 } 1610 1611 static int it930x_tuner_attach(struct dvb_usb_adapter *adap) 1612 { 1613 struct state *state = adap_to_priv(adap); 1614 struct dvb_usb_device *d = adap_to_d(adap); 1615 struct usb_interface *intf = d->intf; 1616 int ret; 1617 struct si2157_config si2157_config; 1618 1619 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1620 1621 memset(&si2157_config, 0, sizeof(si2157_config)); 1622 si2157_config.fe = adap->fe[0]; 1623 1624 /* 1625 * HACK: The Logilink VG0022A and TerraTec TC2 Stick have 1626 * a bug: when the si2157 firmware that came with the device 1627 * is replaced by a new one, the I2C transfers to the tuner 1628 * will return just 0xff. 1629 * 1630 * Probably, the vendor firmware has some patch specifically 1631 * designed for this device. So, we can't replace by the 1632 * generic firmware. The right solution would be to extract 1633 * the si2157 firmware from the original driver and ask the 1634 * driver to load the specifically designed firmware, but, 1635 * while we don't have that, the next best solution is to just 1636 * keep the original firmware at the device. 1637 */ 1638 if ((le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_DEXATEK && 1639 le16_to_cpu(d->udev->descriptor.idProduct) == 0x0100) || 1640 (le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_TERRATEC && 1641 le16_to_cpu(d->udev->descriptor.idProduct) == USB_PID_TERRATEC_CINERGY_TC2_STICK)) 1642 si2157_config.dont_load_firmware = true; 1643 1644 si2157_config.if_port = it930x_addresses_table[state->it930x_addresses].tuner_if_port; 1645 ret = af9035_add_i2c_dev(d, "si2157", 1646 it930x_addresses_table[state->it930x_addresses].tuner_i2c_addr, 1647 &si2157_config, state->i2c_adapter_demod); 1648 if (ret) 1649 goto err; 1650 1651 return 0; 1652 1653 err: 1654 dev_dbg(&intf->dev, "failed=%d\n", ret); 1655 1656 return ret; 1657 } 1658 1659 1660 static int it930x_tuner_detach(struct dvb_usb_adapter *adap) 1661 { 1662 struct state *state = adap_to_priv(adap); 1663 struct dvb_usb_device *d = adap_to_d(adap); 1664 struct usb_interface *intf = d->intf; 1665 1666 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1667 1668 if (adap->id == 1) { 1669 if (state->i2c_client[3]) 1670 af9035_del_i2c_dev(d); 1671 } else if (adap->id == 0) { 1672 if (state->i2c_client[1]) 1673 af9035_del_i2c_dev(d); 1674 } 1675 1676 return 0; 1677 } 1678 1679 1680 static int af9035_tuner_detach(struct dvb_usb_adapter *adap) 1681 { 1682 struct state *state = adap_to_priv(adap); 1683 struct dvb_usb_device *d = adap_to_d(adap); 1684 struct usb_interface *intf = d->intf; 1685 1686 dev_dbg(&intf->dev, "adap->id=%d\n", adap->id); 1687 1688 switch (state->af9033_config[adap->id].tuner) { 1689 case AF9033_TUNER_TUA9001: 1690 case AF9033_TUNER_FC2580: 1691 if (adap->id == 1) { 1692 if (state->i2c_client[3]) 1693 af9035_del_i2c_dev(d); 1694 } else if (adap->id == 0) { 1695 if (state->i2c_client[1]) 1696 af9035_del_i2c_dev(d); 1697 } 1698 break; 1699 case AF9033_TUNER_IT9135_38: 1700 case AF9033_TUNER_IT9135_51: 1701 case AF9033_TUNER_IT9135_52: 1702 case AF9033_TUNER_IT9135_60: 1703 case AF9033_TUNER_IT9135_61: 1704 case AF9033_TUNER_IT9135_62: 1705 { 1706 struct platform_device *pdev; 1707 1708 pdev = state->platform_device_tuner[adap->id]; 1709 if (pdev) { 1710 module_put(pdev->dev.driver->owner); 1711 platform_device_unregister(pdev); 1712 } 1713 break; 1714 } 1715 } 1716 1717 return 0; 1718 } 1719 1720 static int af9035_init(struct dvb_usb_device *d) 1721 { 1722 struct state *state = d_to_priv(d); 1723 struct usb_interface *intf = d->intf; 1724 int ret, i; 1725 u16 frame_size = (d->udev->speed == USB_SPEED_FULL ? 5 : 87) * 188 / 4; 1726 u8 packet_size = (d->udev->speed == USB_SPEED_FULL ? 64 : 512) / 4; 1727 struct reg_val_mask tab[] = { 1728 { 0x80f99d, 0x01, 0x01 }, 1729 { 0x80f9a4, 0x01, 0x01 }, 1730 { 0x00dd11, 0x00, 0x20 }, 1731 { 0x00dd11, 0x00, 0x40 }, 1732 { 0x00dd13, 0x00, 0x20 }, 1733 { 0x00dd13, 0x00, 0x40 }, 1734 { 0x00dd11, 0x20, 0x20 }, 1735 { 0x00dd88, (frame_size >> 0) & 0xff, 0xff}, 1736 { 0x00dd89, (frame_size >> 8) & 0xff, 0xff}, 1737 { 0x00dd0c, packet_size, 0xff}, 1738 { 0x00dd11, state->dual_mode << 6, 0x40 }, 1739 { 0x00dd8a, (frame_size >> 0) & 0xff, 0xff}, 1740 { 0x00dd8b, (frame_size >> 8) & 0xff, 0xff}, 1741 { 0x00dd0d, packet_size, 0xff }, 1742 { 0x80f9a3, state->dual_mode, 0x01 }, 1743 { 0x80f9cd, state->dual_mode, 0x01 }, 1744 { 0x80f99d, 0x00, 0x01 }, 1745 { 0x80f9a4, 0x00, 0x01 }, 1746 }; 1747 1748 dev_dbg(&intf->dev, "USB speed=%d frame_size=%04x packet_size=%02x\n", 1749 d->udev->speed, frame_size, packet_size); 1750 1751 /* init endpoints */ 1752 for (i = 0; i < ARRAY_SIZE(tab); i++) { 1753 ret = af9035_wr_reg_mask(d, tab[i].reg, tab[i].val, 1754 tab[i].mask); 1755 if (ret < 0) 1756 goto err; 1757 } 1758 1759 return 0; 1760 1761 err: 1762 dev_dbg(&intf->dev, "failed=%d\n", ret); 1763 1764 return ret; 1765 } 1766 1767 static int it930x_init(struct dvb_usb_device *d) 1768 { 1769 struct state *state = d_to_priv(d); 1770 struct usb_interface *intf = d->intf; 1771 int ret, i; 1772 u16 frame_size = (d->udev->speed == USB_SPEED_FULL ? 5 : 816) * 188 / 4; 1773 u8 packet_size = (d->udev->speed == USB_SPEED_FULL ? 64 : 512) / 4; 1774 struct reg_val_mask tab[] = { 1775 { 0x00da1a, 0x00, 0x01 }, /* ignore_sync_byte */ 1776 { 0x00f41f, 0x04, 0x04 }, /* dvbt_inten */ 1777 { 0x00da10, 0x00, 0x01 }, /* mpeg_full_speed */ 1778 { 0x00f41a, 0x01, 0x01 }, /* dvbt_en */ 1779 { 0x00da1d, 0x01, 0x01 }, /* mp2_sw_rst, reset EP4 */ 1780 { 0x00dd11, 0x00, 0x20 }, /* ep4_tx_en, disable EP4 */ 1781 { 0x00dd13, 0x00, 0x20 }, /* ep4_tx_nak, disable EP4 NAK */ 1782 { 0x00dd11, 0x20, 0x20 }, /* ep4_tx_en, enable EP4 */ 1783 { 0x00dd11, 0x00, 0x40 }, /* ep5_tx_en, disable EP5 */ 1784 { 0x00dd13, 0x00, 0x40 }, /* ep5_tx_nak, disable EP5 NAK */ 1785 { 0x00dd11, state->dual_mode << 6, 0x40 }, /* enable EP5 */ 1786 { 0x00dd88, (frame_size >> 0) & 0xff, 0xff}, 1787 { 0x00dd89, (frame_size >> 8) & 0xff, 0xff}, 1788 { 0x00dd0c, packet_size, 0xff}, 1789 { 0x00dd8a, (frame_size >> 0) & 0xff, 0xff}, 1790 { 0x00dd8b, (frame_size >> 8) & 0xff, 0xff}, 1791 { 0x00dd0d, packet_size, 0xff }, 1792 { 0x00da1d, 0x00, 0x01 }, /* mp2_sw_rst, disable */ 1793 { 0x00d833, 0x01, 0xff }, /* slew rate ctrl: slew rate boosts */ 1794 { 0x00d830, 0x00, 0xff }, /* Bit 0 of output driving control */ 1795 { 0x00d831, 0x01, 0xff }, /* Bit 1 of output driving control */ 1796 { 0x00d832, 0x00, 0xff }, /* Bit 2 of output driving control */ 1797 1798 /* suspend gpio1 for TS-C */ 1799 { 0x00d8b0, 0x01, 0xff }, /* gpio1 */ 1800 { 0x00d8b1, 0x01, 0xff }, /* gpio1 */ 1801 { 0x00d8af, 0x00, 0xff }, /* gpio1 */ 1802 1803 /* suspend gpio7 for TS-D */ 1804 { 0x00d8c4, 0x01, 0xff }, /* gpio7 */ 1805 { 0x00d8c5, 0x01, 0xff }, /* gpio7 */ 1806 { 0x00d8c3, 0x00, 0xff }, /* gpio7 */ 1807 1808 /* suspend gpio13 for TS-B */ 1809 { 0x00d8dc, 0x01, 0xff }, /* gpio13 */ 1810 { 0x00d8dd, 0x01, 0xff }, /* gpio13 */ 1811 { 0x00d8db, 0x00, 0xff }, /* gpio13 */ 1812 1813 /* suspend gpio14 for TS-E */ 1814 { 0x00d8e4, 0x01, 0xff }, /* gpio14 */ 1815 { 0x00d8e5, 0x01, 0xff }, /* gpio14 */ 1816 { 0x00d8e3, 0x00, 0xff }, /* gpio14 */ 1817 1818 /* suspend gpio15 for TS-A */ 1819 { 0x00d8e8, 0x01, 0xff }, /* gpio15 */ 1820 { 0x00d8e9, 0x01, 0xff }, /* gpio15 */ 1821 { 0x00d8e7, 0x00, 0xff }, /* gpio15 */ 1822 1823 { 0x00da58, 0x00, 0x01 }, /* ts_in_src, serial */ 1824 { 0x00da73, 0x01, 0xff }, /* ts0_aggre_mode */ 1825 { 0x00da78, 0x47, 0xff }, /* ts0_sync_byte */ 1826 { 0x00da4c, 0x01, 0xff }, /* ts0_en */ 1827 { 0x00da5a, 0x1f, 0xff }, /* ts_fail_ignore */ 1828 }; 1829 1830 dev_dbg(&intf->dev, "USB speed=%d frame_size=%04x packet_size=%02x\n", 1831 d->udev->speed, frame_size, packet_size); 1832 1833 /* init endpoints */ 1834 for (i = 0; i < ARRAY_SIZE(tab); i++) { 1835 ret = af9035_wr_reg_mask(d, tab[i].reg, 1836 tab[i].val, tab[i].mask); 1837 1838 if (ret < 0) 1839 goto err; 1840 } 1841 1842 return 0; 1843 err: 1844 dev_dbg(&intf->dev, "failed=%d\n", ret); 1845 1846 return ret; 1847 } 1848 1849 1850 #if IS_ENABLED(CONFIG_RC_CORE) 1851 static int af9035_rc_query(struct dvb_usb_device *d) 1852 { 1853 struct usb_interface *intf = d->intf; 1854 int ret; 1855 enum rc_proto proto; 1856 u32 key; 1857 u8 buf[4]; 1858 struct usb_req req = { CMD_IR_GET, 0, 0, NULL, 4, buf }; 1859 1860 ret = af9035_ctrl_msg(d, &req); 1861 if (ret == 1) 1862 return 0; 1863 else if (ret < 0) 1864 goto err; 1865 1866 if ((buf[2] + buf[3]) == 0xff) { 1867 if ((buf[0] + buf[1]) == 0xff) { 1868 /* NEC standard 16bit */ 1869 key = RC_SCANCODE_NEC(buf[0], buf[2]); 1870 proto = RC_PROTO_NEC; 1871 } else { 1872 /* NEC extended 24bit */ 1873 key = RC_SCANCODE_NECX(buf[0] << 8 | buf[1], buf[2]); 1874 proto = RC_PROTO_NECX; 1875 } 1876 } else { 1877 /* NEC full code 32bit */ 1878 key = RC_SCANCODE_NEC32(buf[0] << 24 | buf[1] << 16 | 1879 buf[2] << 8 | buf[3]); 1880 proto = RC_PROTO_NEC32; 1881 } 1882 1883 dev_dbg(&intf->dev, "%*ph\n", 4, buf); 1884 1885 rc_keydown(d->rc_dev, proto, key, 0); 1886 1887 return 0; 1888 1889 err: 1890 dev_dbg(&intf->dev, "failed=%d\n", ret); 1891 1892 return ret; 1893 } 1894 1895 static int af9035_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc) 1896 { 1897 struct state *state = d_to_priv(d); 1898 struct usb_interface *intf = d->intf; 1899 1900 dev_dbg(&intf->dev, "ir_mode=%02x ir_type=%02x\n", 1901 state->ir_mode, state->ir_type); 1902 1903 /* don't activate rc if in HID mode or if not available */ 1904 if (state->ir_mode == 0x05) { 1905 switch (state->ir_type) { 1906 case 0: /* NEC */ 1907 default: 1908 rc->allowed_protos = RC_PROTO_BIT_NEC | 1909 RC_PROTO_BIT_NECX | RC_PROTO_BIT_NEC32; 1910 break; 1911 case 1: /* RC6 */ 1912 rc->allowed_protos = RC_PROTO_BIT_RC6_MCE; 1913 break; 1914 } 1915 1916 rc->query = af9035_rc_query; 1917 rc->interval = 500; 1918 1919 /* load empty to enable rc */ 1920 if (!rc->map_name) 1921 rc->map_name = RC_MAP_EMPTY; 1922 } 1923 1924 return 0; 1925 } 1926 #else 1927 #define af9035_get_rc_config NULL 1928 #endif 1929 1930 static int af9035_get_stream_config(struct dvb_frontend *fe, u8 *ts_type, 1931 struct usb_data_stream_properties *stream) 1932 { 1933 struct dvb_usb_device *d = fe_to_d(fe); 1934 struct usb_interface *intf = d->intf; 1935 1936 dev_dbg(&intf->dev, "adap=%d\n", fe_to_adap(fe)->id); 1937 1938 if (d->udev->speed == USB_SPEED_FULL) 1939 stream->u.bulk.buffersize = 5 * 188; 1940 1941 return 0; 1942 } 1943 1944 static int af9035_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff) 1945 { 1946 struct state *state = adap_to_priv(adap); 1947 1948 return state->ops.pid_filter_ctrl(adap->fe[0], onoff); 1949 } 1950 1951 static int af9035_pid_filter(struct dvb_usb_adapter *adap, int index, u16 pid, 1952 int onoff) 1953 { 1954 struct state *state = adap_to_priv(adap); 1955 1956 return state->ops.pid_filter(adap->fe[0], index, pid, onoff); 1957 } 1958 1959 static int af9035_probe(struct usb_interface *intf, 1960 const struct usb_device_id *id) 1961 { 1962 struct usb_device *udev = interface_to_usbdev(intf); 1963 char manufacturer[sizeof("Afatech")]; 1964 1965 memset(manufacturer, 0, sizeof(manufacturer)); 1966 usb_string(udev, udev->descriptor.iManufacturer, 1967 manufacturer, sizeof(manufacturer)); 1968 /* 1969 * There is two devices having same ID but different chipset. One uses 1970 * AF9015 and the other IT9135 chipset. Only difference seen on lsusb 1971 * is iManufacturer string. 1972 * 1973 * idVendor 0x0ccd TerraTec Electronic GmbH 1974 * idProduct 0x0099 1975 * bcdDevice 2.00 1976 * iManufacturer 1 Afatech 1977 * iProduct 2 DVB-T 2 1978 * 1979 * idVendor 0x0ccd TerraTec Electronic GmbH 1980 * idProduct 0x0099 1981 * bcdDevice 2.00 1982 * iManufacturer 1 ITE Technologies, Inc. 1983 * iProduct 2 DVB-T TV Stick 1984 */ 1985 if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VID_TERRATEC) && 1986 (le16_to_cpu(udev->descriptor.idProduct) == 0x0099)) { 1987 if (!strcmp("Afatech", manufacturer)) { 1988 dev_dbg(&udev->dev, "rejecting device\n"); 1989 return -ENODEV; 1990 } 1991 } 1992 1993 return dvb_usbv2_probe(intf, id); 1994 } 1995 1996 /* interface 0 is used by DVB-T receiver and 1997 interface 1 is for remote controller (HID) */ 1998 static const struct dvb_usb_device_properties af9035_props = { 1999 .driver_name = KBUILD_MODNAME, 2000 .owner = THIS_MODULE, 2001 .adapter_nr = adapter_nr, 2002 .size_of_priv = sizeof(struct state), 2003 2004 .generic_bulk_ctrl_endpoint = 0x02, 2005 .generic_bulk_ctrl_endpoint_response = 0x81, 2006 2007 .identify_state = af9035_identify_state, 2008 .download_firmware = af9035_download_firmware, 2009 2010 .i2c_algo = &af9035_i2c_algo, 2011 .read_config = af9035_read_config, 2012 .frontend_attach = af9035_frontend_attach, 2013 .frontend_detach = af9035_frontend_detach, 2014 .tuner_attach = af9035_tuner_attach, 2015 .tuner_detach = af9035_tuner_detach, 2016 .init = af9035_init, 2017 .get_rc_config = af9035_get_rc_config, 2018 .get_stream_config = af9035_get_stream_config, 2019 2020 .get_adapter_count = af9035_get_adapter_count, 2021 .adapter = { 2022 { 2023 .caps = DVB_USB_ADAP_HAS_PID_FILTER | 2024 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, 2025 2026 .pid_filter_count = 32, 2027 .pid_filter_ctrl = af9035_pid_filter_ctrl, 2028 .pid_filter = af9035_pid_filter, 2029 2030 .stream = DVB_USB_STREAM_BULK(0x84, 6, 87 * 188), 2031 }, { 2032 .caps = DVB_USB_ADAP_HAS_PID_FILTER | 2033 DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF, 2034 2035 .pid_filter_count = 32, 2036 .pid_filter_ctrl = af9035_pid_filter_ctrl, 2037 .pid_filter = af9035_pid_filter, 2038 2039 .stream = DVB_USB_STREAM_BULK(0x85, 6, 87 * 188), 2040 }, 2041 }, 2042 }; 2043 2044 static const struct dvb_usb_device_properties it930x_props = { 2045 .driver_name = KBUILD_MODNAME, 2046 .owner = THIS_MODULE, 2047 .adapter_nr = adapter_nr, 2048 .size_of_priv = sizeof(struct state), 2049 2050 .generic_bulk_ctrl_endpoint = 0x02, 2051 .generic_bulk_ctrl_endpoint_response = 0x81, 2052 2053 .identify_state = af9035_identify_state, 2054 .download_firmware = af9035_download_firmware, 2055 2056 .i2c_algo = &af9035_i2c_algo, 2057 .read_config = af9035_read_config, 2058 .frontend_attach = it930x_frontend_attach, 2059 .frontend_detach = af9035_frontend_detach, 2060 .tuner_attach = it930x_tuner_attach, 2061 .tuner_detach = it930x_tuner_detach, 2062 .init = it930x_init, 2063 .get_stream_config = af9035_get_stream_config, 2064 2065 .get_adapter_count = af9035_get_adapter_count, 2066 .adapter = { 2067 { 2068 .stream = DVB_USB_STREAM_BULK(0x84, 4, 816 * 188), 2069 }, { 2070 .stream = DVB_USB_STREAM_BULK(0x85, 4, 816 * 188), 2071 }, 2072 }, 2073 }; 2074 2075 static const struct usb_device_id af9035_id_table[] = { 2076 /* AF9035 devices */ 2077 { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_9035, 2078 &af9035_props, "Afatech AF9035 reference design", NULL) }, 2079 { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1000, 2080 &af9035_props, "Afatech AF9035 reference design", NULL) }, 2081 { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1001, 2082 &af9035_props, "Afatech AF9035 reference design", NULL) }, 2083 { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1002, 2084 &af9035_props, "Afatech AF9035 reference design", NULL) }, 2085 { DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9035_1003, 2086 &af9035_props, "Afatech AF9035 reference design", NULL) }, 2087 { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK, 2088 &af9035_props, "TerraTec Cinergy T Stick", NULL) }, 2089 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835, 2090 &af9035_props, "AVerMedia AVerTV Volar HD/PRO (A835)", NULL) }, 2091 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_B835, 2092 &af9035_props, "AVerMedia AVerTV Volar HD/PRO (A835)", NULL) }, 2093 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_1867, 2094 &af9035_props, "AVerMedia HD Volar (A867)", NULL) }, 2095 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A867, 2096 &af9035_props, "AVerMedia HD Volar (A867)", NULL) }, 2097 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TWINSTAR, 2098 &af9035_props, "AVerMedia Twinstar (A825)", NULL) }, 2099 { DVB_USB_DEVICE(USB_VID_ASUS, USB_PID_ASUS_U3100MINI_PLUS, 2100 &af9035_props, "Asus U3100Mini Plus", NULL) }, 2101 { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x00aa, 2102 &af9035_props, "TerraTec Cinergy T Stick (rev. 2)", NULL) }, 2103 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, 0x0337, 2104 &af9035_props, "AVerMedia HD Volar (A867)", NULL) }, 2105 { DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_EVOLVEO_XTRATV_STICK, 2106 &af9035_props, "EVOLVEO XtraTV stick", NULL) }, 2107 2108 /* IT9135 devices */ 2109 { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135, 2110 &af9035_props, "ITE 9135 Generic", RC_MAP_IT913X_V1) }, 2111 { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9005, 2112 &af9035_props, "ITE 9135(9005) Generic", RC_MAP_IT913X_V2) }, 2113 { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9135_9006, 2114 &af9035_props, "ITE 9135(9006) Generic", RC_MAP_IT913X_V1) }, 2115 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_1835, 2116 &af9035_props, "Avermedia A835B(1835)", RC_MAP_IT913X_V2) }, 2117 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_2835, 2118 &af9035_props, "Avermedia A835B(2835)", RC_MAP_IT913X_V2) }, 2119 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_3835, 2120 &af9035_props, "Avermedia A835B(3835)", RC_MAP_IT913X_V2) }, 2121 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A835B_4835, 2122 &af9035_props, "Avermedia A835B(4835)", RC_MAP_IT913X_V2) }, 2123 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TD110, 2124 &af9035_props, "Avermedia AverTV Volar HD 2 (TD110)", RC_MAP_AVERMEDIA_RM_KS) }, 2125 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_H335, 2126 &af9035_props, "Avermedia H335", RC_MAP_IT913X_V2) }, 2127 { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB499_2T_T09, 2128 &af9035_props, "Kworld UB499-2T T09", RC_MAP_IT913X_V1) }, 2129 { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22_IT9137, 2130 &af9035_props, "Sveon STV22 Dual DVB-T HDTV", 2131 RC_MAP_IT913X_V1) }, 2132 { DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CTVDIGDUAL_V2, 2133 &af9035_props, "Digital Dual TV Receiver CTVDIGDUAL_V2", 2134 RC_MAP_IT913X_V1) }, 2135 { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_T1, 2136 &af9035_props, "TerraTec T1", RC_MAP_IT913X_V1) }, 2137 /* XXX: that same ID [0ccd:0099] is used by af9015 driver too */ 2138 { DVB_USB_DEVICE(USB_VID_TERRATEC, 0x0099, 2139 &af9035_props, "TerraTec Cinergy T Stick Dual RC (rev. 2)", 2140 NULL) }, 2141 { DVB_USB_DEVICE(USB_VID_LEADTEK, 0x6a05, 2142 &af9035_props, "Leadtek WinFast DTV Dongle Dual", NULL) }, 2143 { DVB_USB_DEVICE(USB_VID_HAUPPAUGE, 0xf900, 2144 &af9035_props, "Hauppauge WinTV-MiniStick 2", NULL) }, 2145 { DVB_USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_78E, 2146 &af9035_props, "PCTV AndroiDTV (78e)", RC_MAP_IT913X_V1) }, 2147 { DVB_USB_DEVICE(USB_VID_PCTV, USB_PID_PCTV_79E, 2148 &af9035_props, "PCTV microStick (79e)", RC_MAP_IT913X_V2) }, 2149 2150 /* IT930x devices */ 2151 { DVB_USB_DEVICE(USB_VID_ITETECH, USB_PID_ITETECH_IT9303, 2152 &it930x_props, "ITE 9303 Generic", NULL) }, 2153 { DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_TD310, 2154 &it930x_props, "AVerMedia TD310 DVB-T2", NULL) }, 2155 { DVB_USB_DEVICE(USB_VID_DEXATEK, 0x0100, 2156 &it930x_props, "Logilink VG0022A", NULL) }, 2157 { DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_TC2_STICK, 2158 &it930x_props, "TerraTec Cinergy TC2 Stick", NULL) }, 2159 { } 2160 }; 2161 MODULE_DEVICE_TABLE(usb, af9035_id_table); 2162 2163 static struct usb_driver af9035_usb_driver = { 2164 .name = KBUILD_MODNAME, 2165 .id_table = af9035_id_table, 2166 .probe = af9035_probe, 2167 .disconnect = dvb_usbv2_disconnect, 2168 .suspend = dvb_usbv2_suspend, 2169 .resume = dvb_usbv2_resume, 2170 .reset_resume = dvb_usbv2_reset_resume, 2171 .no_dynamic_id = 1, 2172 .soft_unbind = 1, 2173 }; 2174 2175 module_usb_driver(af9035_usb_driver); 2176 2177 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>"); 2178 MODULE_DESCRIPTION("Afatech AF9035 driver"); 2179 MODULE_LICENSE("GPL"); 2180 MODULE_FIRMWARE(AF9035_FIRMWARE_AF9035); 2181 MODULE_FIRMWARE(AF9035_FIRMWARE_IT9135_V1); 2182 MODULE_FIRMWARE(AF9035_FIRMWARE_IT9135_V2); 2183 MODULE_FIRMWARE(AF9035_FIRMWARE_IT9303); 2184