1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3  * DVB USB Linux driver for Afatech AF9015 DVB-T USB2.0 receiver
4  *
5  * Copyright (C) 2007 Antti Palosaari <crope@iki.fi>
6  *
7  * Thanks to Afatech who kindly provided information.
8  */
9 
10 #include "af9015.h"
11 
12 static int dvb_usb_af9015_remote;
13 module_param_named(remote, dvb_usb_af9015_remote, int, 0644);
14 MODULE_PARM_DESC(remote, "select remote");
15 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
16 
af9015_ctrl_msg(struct dvb_usb_device * d,struct req_t * req)17 static int af9015_ctrl_msg(struct dvb_usb_device *d, struct req_t *req)
18 {
19 #define REQ_HDR_LEN 8 /* send header size */
20 #define ACK_HDR_LEN 2 /* rece header size */
21 	struct af9015_state *state = d_to_priv(d);
22 	struct usb_interface *intf = d->intf;
23 	int ret, wlen, rlen;
24 	u8 write = 1;
25 
26 	mutex_lock(&d->usb_mutex);
27 
28 	state->buf[0] = req->cmd;
29 	state->buf[1] = state->seq++;
30 	state->buf[2] = req->i2c_addr << 1;
31 	state->buf[3] = req->addr >> 8;
32 	state->buf[4] = req->addr & 0xff;
33 	state->buf[5] = req->mbox;
34 	state->buf[6] = req->addr_len;
35 	state->buf[7] = req->data_len;
36 
37 	switch (req->cmd) {
38 	case GET_CONFIG:
39 	case READ_MEMORY:
40 	case RECONNECT_USB:
41 		write = 0;
42 		break;
43 	case READ_I2C:
44 		write = 0;
45 		state->buf[2] |= 0x01; /* set I2C direction */
46 		fallthrough;
47 	case WRITE_I2C:
48 		state->buf[0] = READ_WRITE_I2C;
49 		break;
50 	case WRITE_MEMORY:
51 		if (((req->addr & 0xff00) == 0xff00) ||
52 		    ((req->addr & 0xff00) == 0xae00))
53 			state->buf[0] = WRITE_VIRTUAL_MEMORY;
54 		break;
55 	case WRITE_VIRTUAL_MEMORY:
56 	case COPY_FIRMWARE:
57 	case DOWNLOAD_FIRMWARE:
58 	case BOOT:
59 		break;
60 	default:
61 		dev_err(&intf->dev, "unknown cmd %d\n", req->cmd);
62 		ret = -EIO;
63 		goto error;
64 	}
65 
66 	/* Buffer overflow check */
67 	if ((write && (req->data_len > BUF_LEN - REQ_HDR_LEN)) ||
68 	    (!write && (req->data_len > BUF_LEN - ACK_HDR_LEN))) {
69 		dev_err(&intf->dev, "too much data, cmd %u, len %u\n",
70 			req->cmd, req->data_len);
71 		ret = -EINVAL;
72 		goto error;
73 	}
74 
75 	/*
76 	 * Write receives seq + status = 2 bytes
77 	 * Read receives seq + status + data = 2 + N bytes
78 	 */
79 	wlen = REQ_HDR_LEN;
80 	rlen = ACK_HDR_LEN;
81 	if (write) {
82 		wlen += req->data_len;
83 		memcpy(&state->buf[REQ_HDR_LEN], req->data, req->data_len);
84 	} else {
85 		rlen += req->data_len;
86 	}
87 
88 	/* no ack for these packets */
89 	if (req->cmd == DOWNLOAD_FIRMWARE || req->cmd == RECONNECT_USB)
90 		rlen = 0;
91 
92 	ret = dvb_usbv2_generic_rw_locked(d, state->buf, wlen,
93 					  state->buf, rlen);
94 	if (ret)
95 		goto error;
96 
97 	/* check status */
98 	if (rlen && state->buf[1]) {
99 		dev_err(&intf->dev, "cmd failed %u\n", state->buf[1]);
100 		ret = -EIO;
101 		goto error;
102 	}
103 
104 	/* read request, copy returned data to return buf */
105 	if (!write)
106 		memcpy(req->data, &state->buf[ACK_HDR_LEN], req->data_len);
107 error:
108 	mutex_unlock(&d->usb_mutex);
109 
110 	return ret;
111 }
112 
af9015_write_reg_i2c(struct dvb_usb_device * d,u8 addr,u16 reg,u8 val)113 static int af9015_write_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg,
114 				u8 val)
115 {
116 	struct af9015_state *state = d_to_priv(d);
117 	struct req_t req = {WRITE_I2C, addr, reg, 1, 1, 1, &val};
118 
119 	if (addr == state->af9013_i2c_addr[0] ||
120 	    addr == state->af9013_i2c_addr[1])
121 		req.addr_len = 3;
122 
123 	return af9015_ctrl_msg(d, &req);
124 }
125 
af9015_read_reg_i2c(struct dvb_usb_device * d,u8 addr,u16 reg,u8 * val)126 static int af9015_read_reg_i2c(struct dvb_usb_device *d, u8 addr, u16 reg,
127 			       u8 *val)
128 {
129 	struct af9015_state *state = d_to_priv(d);
130 	struct req_t req = {READ_I2C, addr, reg, 0, 1, 1, val};
131 
132 	if (addr == state->af9013_i2c_addr[0] ||
133 	    addr == state->af9013_i2c_addr[1])
134 		req.addr_len = 3;
135 
136 	return af9015_ctrl_msg(d, &req);
137 }
138 
af9015_i2c_xfer(struct i2c_adapter * adap,struct i2c_msg msg[],int num)139 static int af9015_i2c_xfer(struct i2c_adapter *adap, struct i2c_msg msg[],
140 			   int num)
141 {
142 	struct dvb_usb_device *d = i2c_get_adapdata(adap);
143 	struct af9015_state *state = d_to_priv(d);
144 	struct usb_interface *intf = d->intf;
145 	int ret;
146 	u16 addr;
147 	u8 mbox, addr_len;
148 	struct req_t req;
149 
150 	/*
151 	 * I2C multiplexing:
152 	 * There could be two tuners, both using same I2C address. Demodulator
153 	 * I2C-gate is only possibility to select correct tuner.
154 	 *
155 	 * ...........................................
156 	 * . AF9015 integrates AF9013 demodulator    .
157 	 * . ____________               ____________ .             ____________
158 	 * .|   USB IF   |             |   demod    |.            |   tuner    |
159 	 * .|------------|             |------------|.            |------------|
160 	 * .|   AF9015   |             |   AF9013   |.            |   MXL5003  |
161 	 * .|            |--+--I2C-----|-----/ -----|.----I2C-----|            |
162 	 * .|            |  |          | addr 0x1c  |.            |  addr 0x63 |
163 	 * .|____________|  |          |____________|.            |____________|
164 	 * .................|.........................
165 	 *                  |           ____________               ____________
166 	 *                  |          |   demod    |             |   tuner    |
167 	 *                  |          |------------|             |------------|
168 	 *                  |          |   AF9013   |             |   MXL5003  |
169 	 *                  +--I2C-----|-----/ -----|-----I2C-----|            |
170 	 *                             | addr 0x1d  |             |  addr 0x63 |
171 	 *                             |____________|             |____________|
172 	 */
173 
174 	if (msg[0].len == 0 || msg[0].flags & I2C_M_RD) {
175 		addr = 0x0000;
176 		mbox = 0;
177 		addr_len = 0;
178 	} else if (msg[0].len == 1) {
179 		addr = msg[0].buf[0];
180 		mbox = 0;
181 		addr_len = 1;
182 	} else if (msg[0].len == 2) {
183 		addr = msg[0].buf[0] << 8 | msg[0].buf[1] << 0;
184 		mbox = 0;
185 		addr_len = 2;
186 	} else {
187 		addr = msg[0].buf[0] << 8 | msg[0].buf[1] << 0;
188 		mbox = msg[0].buf[2];
189 		addr_len = 3;
190 	}
191 
192 	if (num == 1 && !(msg[0].flags & I2C_M_RD)) {
193 		/* i2c write */
194 		if (msg[0].len > 21) {
195 			ret = -EOPNOTSUPP;
196 			goto err;
197 		}
198 		if (msg[0].addr == state->af9013_i2c_addr[0])
199 			req.cmd = WRITE_MEMORY;
200 		else
201 			req.cmd = WRITE_I2C;
202 		req.i2c_addr = msg[0].addr;
203 		req.addr = addr;
204 		req.mbox = mbox;
205 		req.addr_len = addr_len;
206 		req.data_len = msg[0].len - addr_len;
207 		req.data = &msg[0].buf[addr_len];
208 		ret = af9015_ctrl_msg(d, &req);
209 	} else if (num == 2 && !(msg[0].flags & I2C_M_RD) &&
210 		   (msg[1].flags & I2C_M_RD)) {
211 		/* i2c write + read */
212 		if (msg[0].len > 3 || msg[1].len > 61) {
213 			ret = -EOPNOTSUPP;
214 			goto err;
215 		}
216 		if (msg[0].addr == state->af9013_i2c_addr[0])
217 			req.cmd = READ_MEMORY;
218 		else
219 			req.cmd = READ_I2C;
220 		req.i2c_addr = msg[0].addr;
221 		req.addr = addr;
222 		req.mbox = mbox;
223 		req.addr_len = addr_len;
224 		req.data_len = msg[1].len;
225 		req.data = &msg[1].buf[0];
226 		ret = af9015_ctrl_msg(d, &req);
227 	} else if (num == 1 && (msg[0].flags & I2C_M_RD)) {
228 		/* i2c read */
229 		if (msg[0].len > 61) {
230 			ret = -EOPNOTSUPP;
231 			goto err;
232 		}
233 		if (msg[0].addr == state->af9013_i2c_addr[0]) {
234 			ret = -EINVAL;
235 			goto err;
236 		}
237 		req.cmd = READ_I2C;
238 		req.i2c_addr = msg[0].addr;
239 		req.addr = addr;
240 		req.mbox = mbox;
241 		req.addr_len = addr_len;
242 		req.data_len = msg[0].len;
243 		req.data = &msg[0].buf[0];
244 		ret = af9015_ctrl_msg(d, &req);
245 	} else {
246 		ret = -EOPNOTSUPP;
247 		dev_dbg(&intf->dev, "unknown msg, num %u\n", num);
248 	}
249 	if (ret)
250 		goto err;
251 
252 	return num;
253 err:
254 	dev_dbg(&intf->dev, "failed %d\n", ret);
255 	return ret;
256 }
257 
af9015_i2c_func(struct i2c_adapter * adapter)258 static u32 af9015_i2c_func(struct i2c_adapter *adapter)
259 {
260 	return I2C_FUNC_I2C;
261 }
262 
263 static struct i2c_algorithm af9015_i2c_algo = {
264 	.master_xfer = af9015_i2c_xfer,
265 	.functionality = af9015_i2c_func,
266 };
267 
af9015_identify_state(struct dvb_usb_device * d,const char ** name)268 static int af9015_identify_state(struct dvb_usb_device *d, const char **name)
269 {
270 	struct usb_interface *intf = d->intf;
271 	int ret;
272 	u8 reply;
273 	struct req_t req = {GET_CONFIG, 0, 0, 0, 0, 1, &reply};
274 
275 	ret = af9015_ctrl_msg(d, &req);
276 	if (ret)
277 		return ret;
278 
279 	dev_dbg(&intf->dev, "reply %02x\n", reply);
280 
281 	if (reply == 0x02)
282 		ret = WARM;
283 	else
284 		ret = COLD;
285 
286 	return ret;
287 }
288 
af9015_download_firmware(struct dvb_usb_device * d,const struct firmware * firmware)289 static int af9015_download_firmware(struct dvb_usb_device *d,
290 				    const struct firmware *firmware)
291 {
292 	struct af9015_state *state = d_to_priv(d);
293 	struct usb_interface *intf = d->intf;
294 	int ret, i, rem;
295 	struct req_t req = {DOWNLOAD_FIRMWARE, 0, 0, 0, 0, 0, NULL};
296 	u16 checksum;
297 
298 	dev_dbg(&intf->dev, "\n");
299 
300 	/* Calc checksum, we need it when copy firmware to slave demod */
301 	for (i = 0, checksum = 0; i < firmware->size; i++)
302 		checksum += firmware->data[i];
303 
304 	state->firmware_size = firmware->size;
305 	state->firmware_checksum = checksum;
306 
307 	#define LEN_MAX (BUF_LEN - REQ_HDR_LEN) /* Max payload size */
308 	for (rem = firmware->size; rem > 0; rem -= LEN_MAX) {
309 		req.data_len = min(LEN_MAX, rem);
310 		req.data = (u8 *)&firmware->data[firmware->size - rem];
311 		req.addr = 0x5100 + firmware->size - rem;
312 		ret = af9015_ctrl_msg(d, &req);
313 		if (ret) {
314 			dev_err(&intf->dev, "firmware download failed %d\n",
315 				ret);
316 			goto err;
317 		}
318 	}
319 
320 	req.cmd = BOOT;
321 	req.data_len = 0;
322 	ret = af9015_ctrl_msg(d, &req);
323 	if (ret) {
324 		dev_err(&intf->dev, "firmware boot failed %d\n", ret);
325 		goto err;
326 	}
327 
328 	return 0;
329 err:
330 	dev_dbg(&intf->dev, "failed %d\n", ret);
331 	return ret;
332 }
333 
334 #define AF9015_EEPROM_SIZE 256
335 /* 2^31 + 2^29 - 2^25 + 2^22 - 2^19 - 2^16 + 1 */
336 #define GOLDEN_RATIO_PRIME_32 0x9e370001UL
337 
338 /* hash (and dump) eeprom */
af9015_eeprom_hash(struct dvb_usb_device * d)339 static int af9015_eeprom_hash(struct dvb_usb_device *d)
340 {
341 	struct af9015_state *state = d_to_priv(d);
342 	struct usb_interface *intf = d->intf;
343 	int ret, i;
344 	u8 buf[AF9015_EEPROM_SIZE];
345 	struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, NULL};
346 
347 	/* read eeprom */
348 	for (i = 0; i < AF9015_EEPROM_SIZE; i++) {
349 		req.addr = i;
350 		req.data = &buf[i];
351 		ret = af9015_ctrl_msg(d, &req);
352 		if (ret < 0)
353 			goto err;
354 	}
355 
356 	/* calculate checksum */
357 	for (i = 0; i < AF9015_EEPROM_SIZE / sizeof(u32); i++) {
358 		state->eeprom_sum *= GOLDEN_RATIO_PRIME_32;
359 		state->eeprom_sum += le32_to_cpu(((__le32 *)buf)[i]);
360 	}
361 
362 	for (i = 0; i < AF9015_EEPROM_SIZE; i += 16)
363 		dev_dbg(&intf->dev, "%*ph\n", 16, buf + i);
364 
365 	dev_dbg(&intf->dev, "eeprom sum %.8x\n", state->eeprom_sum);
366 	return 0;
367 err:
368 	dev_dbg(&intf->dev, "failed %d\n", ret);
369 	return ret;
370 }
371 
af9015_read_config(struct dvb_usb_device * d)372 static int af9015_read_config(struct dvb_usb_device *d)
373 {
374 	struct af9015_state *state = d_to_priv(d);
375 	struct usb_interface *intf = d->intf;
376 	int ret;
377 	u8 val, i, offset = 0;
378 	struct req_t req = {READ_I2C, AF9015_I2C_EEPROM, 0, 0, 1, 1, &val};
379 
380 	dev_dbg(&intf->dev, "\n");
381 
382 	/* IR remote controller */
383 	req.addr = AF9015_EEPROM_IR_MODE;
384 	/* first message will timeout often due to possible hw bug */
385 	for (i = 0; i < 4; i++) {
386 		ret = af9015_ctrl_msg(d, &req);
387 		if (!ret)
388 			break;
389 	}
390 	if (ret)
391 		goto error;
392 
393 	ret = af9015_eeprom_hash(d);
394 	if (ret)
395 		goto error;
396 
397 	state->ir_mode = val;
398 	dev_dbg(&intf->dev, "ir mode %02x\n", val);
399 
400 	/* TS mode - one or two receivers */
401 	req.addr = AF9015_EEPROM_TS_MODE;
402 	ret = af9015_ctrl_msg(d, &req);
403 	if (ret)
404 		goto error;
405 
406 	state->dual_mode = val;
407 	dev_dbg(&intf->dev, "ts mode %02x\n", state->dual_mode);
408 
409 	state->af9013_i2c_addr[0] = AF9015_I2C_DEMOD;
410 
411 	if (state->dual_mode) {
412 		/* read 2nd demodulator I2C address */
413 		req.addr = AF9015_EEPROM_DEMOD2_I2C;
414 		ret = af9015_ctrl_msg(d, &req);
415 		if (ret)
416 			goto error;
417 
418 		state->af9013_i2c_addr[1] = val >> 1;
419 	}
420 
421 	for (i = 0; i < state->dual_mode + 1; i++) {
422 		if (i == 1)
423 			offset = AF9015_EEPROM_OFFSET;
424 		/* xtal */
425 		req.addr = AF9015_EEPROM_XTAL_TYPE1 + offset;
426 		ret = af9015_ctrl_msg(d, &req);
427 		if (ret)
428 			goto error;
429 		switch (val) {
430 		case 0:
431 			state->af9013_pdata[i].clk = 28800000;
432 			break;
433 		case 1:
434 			state->af9013_pdata[i].clk = 20480000;
435 			break;
436 		case 2:
437 			state->af9013_pdata[i].clk = 28000000;
438 			break;
439 		case 3:
440 			state->af9013_pdata[i].clk = 25000000;
441 			break;
442 		}
443 		dev_dbg(&intf->dev, "[%d] xtal %02x, clk %u\n",
444 			i, val, state->af9013_pdata[i].clk);
445 
446 		/* IF frequency */
447 		req.addr = AF9015_EEPROM_IF1H + offset;
448 		ret = af9015_ctrl_msg(d, &req);
449 		if (ret)
450 			goto error;
451 
452 		state->af9013_pdata[i].if_frequency = val << 8;
453 
454 		req.addr = AF9015_EEPROM_IF1L + offset;
455 		ret = af9015_ctrl_msg(d, &req);
456 		if (ret)
457 			goto error;
458 
459 		state->af9013_pdata[i].if_frequency += val;
460 		state->af9013_pdata[i].if_frequency *= 1000;
461 		dev_dbg(&intf->dev, "[%d] if frequency %u\n",
462 			i, state->af9013_pdata[i].if_frequency);
463 
464 		/* MT2060 IF1 */
465 		req.addr = AF9015_EEPROM_MT2060_IF1H  + offset;
466 		ret = af9015_ctrl_msg(d, &req);
467 		if (ret)
468 			goto error;
469 		state->mt2060_if1[i] = val << 8;
470 		req.addr = AF9015_EEPROM_MT2060_IF1L + offset;
471 		ret = af9015_ctrl_msg(d, &req);
472 		if (ret)
473 			goto error;
474 		state->mt2060_if1[i] += val;
475 		dev_dbg(&intf->dev, "[%d] MT2060 IF1 %u\n",
476 			i, state->mt2060_if1[i]);
477 
478 		/* tuner */
479 		req.addr =  AF9015_EEPROM_TUNER_ID1 + offset;
480 		ret = af9015_ctrl_msg(d, &req);
481 		if (ret)
482 			goto error;
483 		switch (val) {
484 		case AF9013_TUNER_ENV77H11D5:
485 		case AF9013_TUNER_MT2060:
486 		case AF9013_TUNER_QT1010:
487 		case AF9013_TUNER_UNKNOWN:
488 		case AF9013_TUNER_MT2060_2:
489 		case AF9013_TUNER_TDA18271:
490 		case AF9013_TUNER_QT1010A:
491 		case AF9013_TUNER_TDA18218:
492 			state->af9013_pdata[i].spec_inv = 1;
493 			break;
494 		case AF9013_TUNER_MXL5003D:
495 		case AF9013_TUNER_MXL5005D:
496 		case AF9013_TUNER_MXL5005R:
497 		case AF9013_TUNER_MXL5007T:
498 			state->af9013_pdata[i].spec_inv = 0;
499 			break;
500 		case AF9013_TUNER_MC44S803:
501 			state->af9013_pdata[i].gpio[1] = AF9013_GPIO_LO;
502 			state->af9013_pdata[i].spec_inv = 1;
503 			break;
504 		default:
505 			dev_err(&intf->dev,
506 				"tuner id %02x not supported, please report!\n",
507 				val);
508 			return -ENODEV;
509 		}
510 
511 		state->af9013_pdata[i].tuner = val;
512 		dev_dbg(&intf->dev, "[%d] tuner id %02x\n", i, val);
513 	}
514 
515 error:
516 	if (ret)
517 		dev_err(&intf->dev, "eeprom read failed %d\n", ret);
518 
519 	/*
520 	 * AverMedia AVerTV Volar Black HD (A850) device have bad EEPROM
521 	 * content :-( Override some wrong values here. Ditto for the
522 	 * AVerTV Red HD+ (A850T) device.
523 	 */
524 	if (le16_to_cpu(d->udev->descriptor.idVendor) == USB_VID_AVERMEDIA &&
525 	    ((le16_to_cpu(d->udev->descriptor.idProduct) == USB_PID_AVERMEDIA_A850) ||
526 	    (le16_to_cpu(d->udev->descriptor.idProduct) == USB_PID_AVERMEDIA_A850T))) {
527 		dev_dbg(&intf->dev, "AverMedia A850: overriding config\n");
528 		/* disable dual mode */
529 		state->dual_mode = 0;
530 
531 		/* set correct IF */
532 		state->af9013_pdata[0].if_frequency = 4570000;
533 	}
534 
535 	return ret;
536 }
537 
af9015_get_stream_config(struct dvb_frontend * fe,u8 * ts_type,struct usb_data_stream_properties * stream)538 static int af9015_get_stream_config(struct dvb_frontend *fe, u8 *ts_type,
539 				    struct usb_data_stream_properties *stream)
540 {
541 	struct dvb_usb_device *d = fe_to_d(fe);
542 	struct usb_interface *intf = d->intf;
543 
544 	dev_dbg(&intf->dev, "adap %u\n", fe_to_adap(fe)->id);
545 
546 	if (d->udev->speed == USB_SPEED_FULL)
547 		stream->u.bulk.buffersize = 5 * 188;
548 
549 	return 0;
550 }
551 
af9015_streaming_ctrl(struct dvb_frontend * fe,int onoff)552 static int af9015_streaming_ctrl(struct dvb_frontend *fe, int onoff)
553 {
554 	struct dvb_usb_device *d = fe_to_d(fe);
555 	struct af9015_state *state = d_to_priv(d);
556 	struct usb_interface *intf = d->intf;
557 	int ret;
558 	unsigned int utmp1, utmp2, reg1, reg2;
559 	u8 buf[2];
560 	const unsigned int adap_id = fe_to_adap(fe)->id;
561 
562 	dev_dbg(&intf->dev, "adap id %d, onoff %d\n", adap_id, onoff);
563 
564 	if (!state->usb_ts_if_configured[adap_id]) {
565 		dev_dbg(&intf->dev, "set usb and ts interface\n");
566 
567 		/* USB IF stream settings */
568 		utmp1 = (d->udev->speed == USB_SPEED_FULL ? 5 : 87) * 188 / 4;
569 		utmp2 = (d->udev->speed == USB_SPEED_FULL ? 64 : 512) / 4;
570 
571 		buf[0] = (utmp1 >> 0) & 0xff;
572 		buf[1] = (utmp1 >> 8) & 0xff;
573 		if (adap_id == 0) {
574 			/* 1st USB IF (EP4) stream settings */
575 			reg1 = 0xdd88;
576 			reg2 = 0xdd0c;
577 		} else {
578 			/* 2nd USB IF (EP5) stream settings */
579 			reg1 = 0xdd8a;
580 			reg2 = 0xdd0d;
581 		}
582 		ret = regmap_bulk_write(state->regmap, reg1, buf, 2);
583 		if (ret)
584 			goto err;
585 		ret = regmap_write(state->regmap, reg2, utmp2);
586 		if (ret)
587 			goto err;
588 
589 		/* TS IF settings */
590 		if (state->dual_mode) {
591 			utmp1 = 0x01;
592 			utmp2 = 0x10;
593 		} else {
594 			utmp1 = 0x00;
595 			utmp2 = 0x00;
596 		}
597 		ret = regmap_update_bits(state->regmap, 0xd50b, 0x01, utmp1);
598 		if (ret)
599 			goto err;
600 		ret = regmap_update_bits(state->regmap, 0xd520, 0x10, utmp2);
601 		if (ret)
602 			goto err;
603 
604 		state->usb_ts_if_configured[adap_id] = true;
605 	}
606 
607 	if (adap_id == 0 && onoff) {
608 		/* Adapter 0 stream on. EP4: clear NAK, enable, clear reset */
609 		ret = regmap_update_bits(state->regmap, 0xdd13, 0x20, 0x00);
610 		if (ret)
611 			goto err;
612 		ret = regmap_update_bits(state->regmap, 0xdd11, 0x20, 0x20);
613 		if (ret)
614 			goto err;
615 		ret = regmap_update_bits(state->regmap, 0xd507, 0x04, 0x00);
616 		if (ret)
617 			goto err;
618 	} else if (adap_id == 1 && onoff) {
619 		/* Adapter 1 stream on. EP5: clear NAK, enable, clear reset */
620 		ret = regmap_update_bits(state->regmap, 0xdd13, 0x40, 0x00);
621 		if (ret)
622 			goto err;
623 		ret = regmap_update_bits(state->regmap, 0xdd11, 0x40, 0x40);
624 		if (ret)
625 			goto err;
626 		ret = regmap_update_bits(state->regmap, 0xd50b, 0x02, 0x00);
627 		if (ret)
628 			goto err;
629 	} else if (adap_id == 0 && !onoff) {
630 		/* Adapter 0 stream off. EP4: set reset, disable, set NAK */
631 		ret = regmap_update_bits(state->regmap, 0xd507, 0x04, 0x04);
632 		if (ret)
633 			goto err;
634 		ret = regmap_update_bits(state->regmap, 0xdd11, 0x20, 0x00);
635 		if (ret)
636 			goto err;
637 		ret = regmap_update_bits(state->regmap, 0xdd13, 0x20, 0x20);
638 		if (ret)
639 			goto err;
640 	} else if (adap_id == 1 && !onoff) {
641 		/* Adapter 1 stream off. EP5: set reset, disable, set NAK */
642 		ret = regmap_update_bits(state->regmap, 0xd50b, 0x02, 0x02);
643 		if (ret)
644 			goto err;
645 		ret = regmap_update_bits(state->regmap, 0xdd11, 0x40, 0x00);
646 		if (ret)
647 			goto err;
648 		ret = regmap_update_bits(state->regmap, 0xdd13, 0x40, 0x40);
649 		if (ret)
650 			goto err;
651 	}
652 
653 	return 0;
654 err:
655 	dev_dbg(&intf->dev, "failed %d\n", ret);
656 	return ret;
657 }
658 
af9015_get_adapter_count(struct dvb_usb_device * d)659 static int af9015_get_adapter_count(struct dvb_usb_device *d)
660 {
661 	struct af9015_state *state = d_to_priv(d);
662 
663 	return state->dual_mode + 1;
664 }
665 
666 /* override demod callbacks for resource locking */
af9015_af9013_set_frontend(struct dvb_frontend * fe)667 static int af9015_af9013_set_frontend(struct dvb_frontend *fe)
668 {
669 	int ret;
670 	struct af9015_state *state = fe_to_priv(fe);
671 
672 	if (mutex_lock_interruptible(&state->fe_mutex))
673 		return -EAGAIN;
674 
675 	ret = state->set_frontend[fe_to_adap(fe)->id](fe);
676 
677 	mutex_unlock(&state->fe_mutex);
678 
679 	return ret;
680 }
681 
682 /* override demod callbacks for resource locking */
af9015_af9013_read_status(struct dvb_frontend * fe,enum fe_status * status)683 static int af9015_af9013_read_status(struct dvb_frontend *fe,
684 				     enum fe_status *status)
685 {
686 	int ret;
687 	struct af9015_state *state = fe_to_priv(fe);
688 
689 	if (mutex_lock_interruptible(&state->fe_mutex))
690 		return -EAGAIN;
691 
692 	ret = state->read_status[fe_to_adap(fe)->id](fe, status);
693 
694 	mutex_unlock(&state->fe_mutex);
695 
696 	return ret;
697 }
698 
699 /* override demod callbacks for resource locking */
af9015_af9013_init(struct dvb_frontend * fe)700 static int af9015_af9013_init(struct dvb_frontend *fe)
701 {
702 	int ret;
703 	struct af9015_state *state = fe_to_priv(fe);
704 
705 	if (mutex_lock_interruptible(&state->fe_mutex))
706 		return -EAGAIN;
707 
708 	ret = state->init[fe_to_adap(fe)->id](fe);
709 
710 	mutex_unlock(&state->fe_mutex);
711 
712 	return ret;
713 }
714 
715 /* override demod callbacks for resource locking */
af9015_af9013_sleep(struct dvb_frontend * fe)716 static int af9015_af9013_sleep(struct dvb_frontend *fe)
717 {
718 	int ret;
719 	struct af9015_state *state = fe_to_priv(fe);
720 
721 	if (mutex_lock_interruptible(&state->fe_mutex))
722 		return -EAGAIN;
723 
724 	ret = state->sleep[fe_to_adap(fe)->id](fe);
725 
726 	mutex_unlock(&state->fe_mutex);
727 
728 	return ret;
729 }
730 
731 /* override tuner callbacks for resource locking */
af9015_tuner_init(struct dvb_frontend * fe)732 static int af9015_tuner_init(struct dvb_frontend *fe)
733 {
734 	int ret;
735 	struct af9015_state *state = fe_to_priv(fe);
736 
737 	if (mutex_lock_interruptible(&state->fe_mutex))
738 		return -EAGAIN;
739 
740 	ret = state->tuner_init[fe_to_adap(fe)->id](fe);
741 
742 	mutex_unlock(&state->fe_mutex);
743 
744 	return ret;
745 }
746 
747 /* override tuner callbacks for resource locking */
af9015_tuner_sleep(struct dvb_frontend * fe)748 static int af9015_tuner_sleep(struct dvb_frontend *fe)
749 {
750 	int ret;
751 	struct af9015_state *state = fe_to_priv(fe);
752 
753 	if (mutex_lock_interruptible(&state->fe_mutex))
754 		return -EAGAIN;
755 
756 	ret = state->tuner_sleep[fe_to_adap(fe)->id](fe);
757 
758 	mutex_unlock(&state->fe_mutex);
759 
760 	return ret;
761 }
762 
af9015_copy_firmware(struct dvb_usb_device * d)763 static int af9015_copy_firmware(struct dvb_usb_device *d)
764 {
765 	struct af9015_state *state = d_to_priv(d);
766 	struct usb_interface *intf = d->intf;
767 	int ret;
768 	unsigned long timeout;
769 	u8 val, firmware_info[4];
770 	struct req_t req = {COPY_FIRMWARE, 0, 0x5100, 0, 0, 4, firmware_info};
771 
772 	dev_dbg(&intf->dev, "\n");
773 
774 	firmware_info[0] = (state->firmware_size >> 8) & 0xff;
775 	firmware_info[1] = (state->firmware_size >> 0) & 0xff;
776 	firmware_info[2] = (state->firmware_checksum >> 8) & 0xff;
777 	firmware_info[3] = (state->firmware_checksum >> 0) & 0xff;
778 
779 	/* Check whether firmware is already running */
780 	ret = af9015_read_reg_i2c(d, state->af9013_i2c_addr[1], 0x98be, &val);
781 	if (ret)
782 		goto err;
783 
784 	dev_dbg(&intf->dev, "firmware status %02x\n", val);
785 
786 	if (val == 0x0c)
787 		return 0;
788 
789 	/* Set i2c clock to 625kHz to speed up firmware copy */
790 	ret = regmap_write(state->regmap, 0xd416, 0x04);
791 	if (ret)
792 		goto err;
793 
794 	/* Copy firmware from master demod to slave demod */
795 	ret = af9015_ctrl_msg(d, &req);
796 	if (ret) {
797 		dev_err(&intf->dev, "firmware copy cmd failed %d\n", ret);
798 		goto err;
799 	}
800 
801 	/* Set i2c clock to 125kHz */
802 	ret = regmap_write(state->regmap, 0xd416, 0x14);
803 	if (ret)
804 		goto err;
805 
806 	/* Boot firmware */
807 	ret = af9015_write_reg_i2c(d, state->af9013_i2c_addr[1], 0xe205, 0x01);
808 	if (ret)
809 		goto err;
810 
811 	/* Poll firmware ready */
812 	for (val = 0x00, timeout = jiffies + msecs_to_jiffies(1000);
813 	     !time_after(jiffies, timeout) && val != 0x0c && val != 0x04;) {
814 		msleep(20);
815 
816 		/* Check firmware status. 0c=OK, 04=fail */
817 		ret = af9015_read_reg_i2c(d, state->af9013_i2c_addr[1],
818 					  0x98be, &val);
819 		if (ret)
820 			goto err;
821 
822 		dev_dbg(&intf->dev, "firmware status %02x\n", val);
823 	}
824 
825 	dev_dbg(&intf->dev, "firmware boot took %u ms\n",
826 		jiffies_to_msecs(jiffies) - (jiffies_to_msecs(timeout) - 1000));
827 
828 	if (val == 0x04) {
829 		ret = -ENODEV;
830 		dev_err(&intf->dev, "firmware did not run\n");
831 		goto err;
832 	} else if (val != 0x0c) {
833 		ret = -ETIMEDOUT;
834 		dev_err(&intf->dev, "firmware boot timeout\n");
835 		goto err;
836 	}
837 
838 	return 0;
839 err:
840 	dev_dbg(&intf->dev, "failed %d\n", ret);
841 	return ret;
842 }
843 
af9015_af9013_frontend_attach(struct dvb_usb_adapter * adap)844 static int af9015_af9013_frontend_attach(struct dvb_usb_adapter *adap)
845 {
846 	struct af9015_state *state = adap_to_priv(adap);
847 	struct dvb_usb_device *d = adap_to_d(adap);
848 	struct usb_interface *intf = d->intf;
849 	struct i2c_client *client;
850 	int ret;
851 
852 	dev_dbg(&intf->dev, "adap id %u\n", adap->id);
853 
854 	if (adap->id == 0) {
855 		state->af9013_pdata[0].ts_mode = AF9013_TS_MODE_USB;
856 		memcpy(state->af9013_pdata[0].api_version, "\x0\x1\x9\x0", 4);
857 		state->af9013_pdata[0].gpio[0] = AF9013_GPIO_HI;
858 		state->af9013_pdata[0].gpio[3] = AF9013_GPIO_TUNER_ON;
859 	} else if (adap->id == 1) {
860 		state->af9013_pdata[1].ts_mode = AF9013_TS_MODE_SERIAL;
861 		state->af9013_pdata[1].ts_output_pin = 7;
862 		memcpy(state->af9013_pdata[1].api_version, "\x0\x1\x9\x0", 4);
863 		state->af9013_pdata[1].gpio[0] = AF9013_GPIO_TUNER_ON;
864 		state->af9013_pdata[1].gpio[1] = AF9013_GPIO_LO;
865 
866 		/* copy firmware to 2nd demodulator */
867 		if (state->dual_mode) {
868 			/* Wait 2nd demodulator ready */
869 			msleep(100);
870 
871 			ret = af9015_copy_firmware(adap_to_d(adap));
872 			if (ret) {
873 				dev_err(&intf->dev,
874 					"firmware copy to 2nd frontend failed, will disable it\n");
875 				state->dual_mode = 0;
876 				goto err;
877 			}
878 		} else {
879 			ret = -ENODEV;
880 			goto err;
881 		}
882 	}
883 
884 	/* Add I2C demod */
885 	client = dvb_module_probe("af9013", NULL, &d->i2c_adap,
886 				  state->af9013_i2c_addr[adap->id],
887 				  &state->af9013_pdata[adap->id]);
888 	if (!client) {
889 		ret = -ENODEV;
890 		goto err;
891 	}
892 	adap->fe[0] = state->af9013_pdata[adap->id].get_dvb_frontend(client);
893 	state->demod_i2c_client[adap->id] = client;
894 
895 	/*
896 	 * AF9015 firmware does not like if it gets interrupted by I2C adapter
897 	 * request on some critical phases. During normal operation I2C adapter
898 	 * is used only 2nd demodulator and tuner on dual tuner devices.
899 	 * Override demodulator callbacks and use mutex for limit access to
900 	 * those "critical" paths to keep AF9015 happy.
901 	 */
902 	if (adap->fe[0]) {
903 		state->set_frontend[adap->id] = adap->fe[0]->ops.set_frontend;
904 		adap->fe[0]->ops.set_frontend = af9015_af9013_set_frontend;
905 		state->read_status[adap->id] = adap->fe[0]->ops.read_status;
906 		adap->fe[0]->ops.read_status = af9015_af9013_read_status;
907 		state->init[adap->id] = adap->fe[0]->ops.init;
908 		adap->fe[0]->ops.init = af9015_af9013_init;
909 		state->sleep[adap->id] = adap->fe[0]->ops.sleep;
910 		adap->fe[0]->ops.sleep = af9015_af9013_sleep;
911 	}
912 
913 	return 0;
914 err:
915 	dev_dbg(&intf->dev, "failed %d\n", ret);
916 	return ret;
917 }
918 
af9015_frontend_detach(struct dvb_usb_adapter * adap)919 static int af9015_frontend_detach(struct dvb_usb_adapter *adap)
920 {
921 	struct af9015_state *state = adap_to_priv(adap);
922 	struct dvb_usb_device *d = adap_to_d(adap);
923 	struct usb_interface *intf = d->intf;
924 	struct i2c_client *client;
925 
926 	dev_dbg(&intf->dev, "adap id %u\n", adap->id);
927 
928 	/* Remove I2C demod */
929 	client = state->demod_i2c_client[adap->id];
930 	dvb_module_release(client);
931 
932 	return 0;
933 }
934 
935 static struct mt2060_config af9015_mt2060_config = {
936 	.i2c_address = 0x60,
937 	.clock_out = 0,
938 };
939 
940 static struct qt1010_config af9015_qt1010_config = {
941 	.i2c_address = 0x62,
942 };
943 
944 static struct tda18271_config af9015_tda18271_config = {
945 	.gate = TDA18271_GATE_DIGITAL,
946 	.small_i2c = TDA18271_16_BYTE_CHUNK_INIT,
947 };
948 
949 static struct mxl5005s_config af9015_mxl5003_config = {
950 	.i2c_address     = 0x63,
951 	.if_freq         = IF_FREQ_4570000HZ,
952 	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
953 	.agc_mode        = MXL_SINGLE_AGC,
954 	.tracking_filter = MXL_TF_DEFAULT,
955 	.rssi_enable     = MXL_RSSI_ENABLE,
956 	.cap_select      = MXL_CAP_SEL_ENABLE,
957 	.div_out         = MXL_DIV_OUT_4,
958 	.clock_out       = MXL_CLOCK_OUT_DISABLE,
959 	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
960 	.top		 = MXL5005S_TOP_25P2,
961 	.mod_mode        = MXL_DIGITAL_MODE,
962 	.if_mode         = MXL_ZERO_IF,
963 	.AgcMasterByte   = 0x00,
964 };
965 
966 static struct mxl5005s_config af9015_mxl5005_config = {
967 	.i2c_address     = 0x63,
968 	.if_freq         = IF_FREQ_4570000HZ,
969 	.xtal_freq       = CRYSTAL_FREQ_16000000HZ,
970 	.agc_mode        = MXL_SINGLE_AGC,
971 	.tracking_filter = MXL_TF_OFF,
972 	.rssi_enable     = MXL_RSSI_ENABLE,
973 	.cap_select      = MXL_CAP_SEL_ENABLE,
974 	.div_out         = MXL_DIV_OUT_4,
975 	.clock_out       = MXL_CLOCK_OUT_DISABLE,
976 	.output_load     = MXL5005S_IF_OUTPUT_LOAD_200_OHM,
977 	.top		 = MXL5005S_TOP_25P2,
978 	.mod_mode        = MXL_DIGITAL_MODE,
979 	.if_mode         = MXL_ZERO_IF,
980 	.AgcMasterByte   = 0x00,
981 };
982 
983 static struct mc44s803_config af9015_mc44s803_config = {
984 	.i2c_address = 0x60,
985 	.dig_out = 1,
986 };
987 
988 static struct tda18218_config af9015_tda18218_config = {
989 	.i2c_address = 0x60,
990 	.i2c_wr_max = 21, /* max wr bytes AF9015 I2C adap can handle at once */
991 };
992 
993 static struct mxl5007t_config af9015_mxl5007t_config = {
994 	.xtal_freq_hz = MxL_XTAL_24_MHZ,
995 	.if_freq_hz = MxL_IF_4_57_MHZ,
996 };
997 
af9015_tuner_attach(struct dvb_usb_adapter * adap)998 static int af9015_tuner_attach(struct dvb_usb_adapter *adap)
999 {
1000 	struct dvb_usb_device *d = adap_to_d(adap);
1001 	struct af9015_state *state = d_to_priv(d);
1002 	struct usb_interface *intf = d->intf;
1003 	struct i2c_client *client;
1004 	struct i2c_adapter *adapter;
1005 	int ret;
1006 
1007 	dev_dbg(&intf->dev, "adap id %u\n", adap->id);
1008 
1009 	client = state->demod_i2c_client[adap->id];
1010 	adapter = state->af9013_pdata[adap->id].get_i2c_adapter(client);
1011 
1012 	switch (state->af9013_pdata[adap->id].tuner) {
1013 	case AF9013_TUNER_MT2060:
1014 	case AF9013_TUNER_MT2060_2:
1015 		ret = dvb_attach(mt2060_attach, adap->fe[0], adapter,
1016 				 &af9015_mt2060_config,
1017 				 state->mt2060_if1[adap->id]) == NULL ? -ENODEV : 0;
1018 		break;
1019 	case AF9013_TUNER_QT1010:
1020 	case AF9013_TUNER_QT1010A:
1021 		ret = dvb_attach(qt1010_attach, adap->fe[0], adapter,
1022 				 &af9015_qt1010_config) == NULL ? -ENODEV : 0;
1023 		break;
1024 	case AF9013_TUNER_TDA18271:
1025 		ret = dvb_attach(tda18271_attach, adap->fe[0], 0x60, adapter,
1026 				 &af9015_tda18271_config) == NULL ? -ENODEV : 0;
1027 		break;
1028 	case AF9013_TUNER_TDA18218:
1029 		ret = dvb_attach(tda18218_attach, adap->fe[0], adapter,
1030 				 &af9015_tda18218_config) == NULL ? -ENODEV : 0;
1031 		break;
1032 	case AF9013_TUNER_MXL5003D:
1033 		ret = dvb_attach(mxl5005s_attach, adap->fe[0], adapter,
1034 				 &af9015_mxl5003_config) == NULL ? -ENODEV : 0;
1035 		break;
1036 	case AF9013_TUNER_MXL5005D:
1037 	case AF9013_TUNER_MXL5005R:
1038 		ret = dvb_attach(mxl5005s_attach, adap->fe[0], adapter,
1039 				 &af9015_mxl5005_config) == NULL ? -ENODEV : 0;
1040 		break;
1041 	case AF9013_TUNER_ENV77H11D5:
1042 		ret = dvb_attach(dvb_pll_attach, adap->fe[0], 0x60, adapter,
1043 				 DVB_PLL_TDA665X) == NULL ? -ENODEV : 0;
1044 		break;
1045 	case AF9013_TUNER_MC44S803:
1046 		ret = dvb_attach(mc44s803_attach, adap->fe[0], adapter,
1047 				 &af9015_mc44s803_config) == NULL ? -ENODEV : 0;
1048 		break;
1049 	case AF9013_TUNER_MXL5007T:
1050 		ret = dvb_attach(mxl5007t_attach, adap->fe[0], adapter,
1051 				 0x60, &af9015_mxl5007t_config) == NULL ? -ENODEV : 0;
1052 		break;
1053 	case AF9013_TUNER_UNKNOWN:
1054 	default:
1055 		dev_err(&intf->dev, "unknown tuner, tuner id %02x\n",
1056 			state->af9013_pdata[adap->id].tuner);
1057 		ret = -ENODEV;
1058 	}
1059 
1060 	if (adap->fe[0]->ops.tuner_ops.init) {
1061 		state->tuner_init[adap->id] =
1062 			adap->fe[0]->ops.tuner_ops.init;
1063 		adap->fe[0]->ops.tuner_ops.init = af9015_tuner_init;
1064 	}
1065 
1066 	if (adap->fe[0]->ops.tuner_ops.sleep) {
1067 		state->tuner_sleep[adap->id] =
1068 			adap->fe[0]->ops.tuner_ops.sleep;
1069 		adap->fe[0]->ops.tuner_ops.sleep = af9015_tuner_sleep;
1070 	}
1071 
1072 	return ret;
1073 }
1074 
af9015_pid_filter_ctrl(struct dvb_usb_adapter * adap,int onoff)1075 static int af9015_pid_filter_ctrl(struct dvb_usb_adapter *adap, int onoff)
1076 {
1077 	struct af9015_state *state = adap_to_priv(adap);
1078 	struct af9013_platform_data *pdata = &state->af9013_pdata[adap->id];
1079 	int ret;
1080 
1081 	mutex_lock(&state->fe_mutex);
1082 	ret = pdata->pid_filter_ctrl(adap->fe[0], onoff);
1083 	mutex_unlock(&state->fe_mutex);
1084 
1085 	return ret;
1086 }
1087 
af9015_pid_filter(struct dvb_usb_adapter * adap,int index,u16 pid,int onoff)1088 static int af9015_pid_filter(struct dvb_usb_adapter *adap, int index,
1089 			     u16 pid, int onoff)
1090 {
1091 	struct af9015_state *state = adap_to_priv(adap);
1092 	struct af9013_platform_data *pdata = &state->af9013_pdata[adap->id];
1093 	int ret;
1094 
1095 	mutex_lock(&state->fe_mutex);
1096 	ret = pdata->pid_filter(adap->fe[0], index, pid, onoff);
1097 	mutex_unlock(&state->fe_mutex);
1098 
1099 	return ret;
1100 }
1101 
af9015_init(struct dvb_usb_device * d)1102 static int af9015_init(struct dvb_usb_device *d)
1103 {
1104 	struct af9015_state *state = d_to_priv(d);
1105 	struct usb_interface *intf = d->intf;
1106 	int ret;
1107 
1108 	dev_dbg(&intf->dev, "\n");
1109 
1110 	mutex_init(&state->fe_mutex);
1111 
1112 	/* init RC canary */
1113 	ret = regmap_write(state->regmap, 0x98e9, 0xff);
1114 	if (ret)
1115 		goto error;
1116 
1117 error:
1118 	return ret;
1119 }
1120 
1121 #if IS_ENABLED(CONFIG_RC_CORE)
1122 struct af9015_rc_setup {
1123 	unsigned int id;
1124 	char *rc_codes;
1125 };
1126 
af9015_rc_setup_match(unsigned int id,const struct af9015_rc_setup * table)1127 static char *af9015_rc_setup_match(unsigned int id,
1128 				   const struct af9015_rc_setup *table)
1129 {
1130 	for (; table->rc_codes; table++)
1131 		if (table->id == id)
1132 			return table->rc_codes;
1133 	return NULL;
1134 }
1135 
1136 static const struct af9015_rc_setup af9015_rc_setup_modparam[] = {
1137 	{ AF9015_REMOTE_A_LINK_DTU_M, RC_MAP_ALINK_DTU_M },
1138 	{ AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3, RC_MAP_MSI_DIGIVOX_II },
1139 	{ AF9015_REMOTE_MYGICTV_U718, RC_MAP_TOTAL_MEDIA_IN_HAND },
1140 	{ AF9015_REMOTE_DIGITTRADE_DVB_T, RC_MAP_DIGITTRADE },
1141 	{ AF9015_REMOTE_AVERMEDIA_KS, RC_MAP_AVERMEDIA_RM_KS },
1142 	{ }
1143 };
1144 
1145 static const struct af9015_rc_setup af9015_rc_setup_hashes[] = {
1146 	{ 0xb8feb708, RC_MAP_MSI_DIGIVOX_II },
1147 	{ 0xa3703d00, RC_MAP_ALINK_DTU_M },
1148 	{ 0x9b7dc64e, RC_MAP_TOTAL_MEDIA_IN_HAND }, /* MYGICTV U718 */
1149 	{ 0x5d49e3db, RC_MAP_DIGITTRADE }, /* LC-Power LC-USB-DVBT */
1150 	{ }
1151 };
1152 
af9015_rc_query(struct dvb_usb_device * d)1153 static int af9015_rc_query(struct dvb_usb_device *d)
1154 {
1155 	struct af9015_state *state = d_to_priv(d);
1156 	struct usb_interface *intf = d->intf;
1157 	int ret;
1158 	u8 buf[17];
1159 
1160 	/* read registers needed to detect remote controller code */
1161 	ret = regmap_bulk_read(state->regmap, 0x98d9, buf, sizeof(buf));
1162 	if (ret)
1163 		goto error;
1164 
1165 	/* If any of these are non-zero, assume invalid data */
1166 	if (buf[1] || buf[2] || buf[3]) {
1167 		dev_dbg(&intf->dev, "invalid data\n");
1168 		return 0;
1169 	}
1170 
1171 	/* Check for repeat of previous code */
1172 	if ((state->rc_repeat != buf[6] || buf[0]) &&
1173 	    !memcmp(&buf[12], state->rc_last, 4)) {
1174 		dev_dbg(&intf->dev, "key repeated\n");
1175 		rc_repeat(d->rc_dev);
1176 		state->rc_repeat = buf[6];
1177 		return 0;
1178 	}
1179 
1180 	/* Only process key if canary killed */
1181 	if (buf[16] != 0xff && buf[0] != 0x01) {
1182 		enum rc_proto proto;
1183 
1184 		dev_dbg(&intf->dev, "key pressed %*ph\n", 4, buf + 12);
1185 
1186 		/* Reset the canary */
1187 		ret = regmap_write(state->regmap, 0x98e9, 0xff);
1188 		if (ret)
1189 			goto error;
1190 
1191 		/* Remember this key */
1192 		memcpy(state->rc_last, &buf[12], 4);
1193 		if (buf[14] == (u8)~buf[15]) {
1194 			if (buf[12] == (u8)~buf[13]) {
1195 				/* NEC */
1196 				state->rc_keycode = RC_SCANCODE_NEC(buf[12],
1197 								    buf[14]);
1198 				proto = RC_PROTO_NEC;
1199 			} else {
1200 				/* NEC extended*/
1201 				state->rc_keycode = RC_SCANCODE_NECX(buf[12] << 8 |
1202 								     buf[13],
1203 								     buf[14]);
1204 				proto = RC_PROTO_NECX;
1205 			}
1206 		} else {
1207 			/* 32 bit NEC */
1208 			state->rc_keycode = RC_SCANCODE_NEC32(buf[12] << 24 |
1209 							      buf[13] << 16 |
1210 							      buf[14] << 8  |
1211 							      buf[15]);
1212 			proto = RC_PROTO_NEC32;
1213 		}
1214 		rc_keydown(d->rc_dev, proto, state->rc_keycode, 0);
1215 	} else {
1216 		dev_dbg(&intf->dev, "no key press\n");
1217 		/* Invalidate last keypress */
1218 		/* Not really needed, but helps with debug */
1219 		state->rc_last[2] = state->rc_last[3];
1220 	}
1221 
1222 	state->rc_repeat = buf[6];
1223 	state->rc_failed = false;
1224 
1225 error:
1226 	if (ret) {
1227 		dev_warn(&intf->dev, "rc query failed %d\n", ret);
1228 
1229 		/* allow random errors as dvb-usb will stop polling on error */
1230 		if (!state->rc_failed)
1231 			ret = 0;
1232 
1233 		state->rc_failed = true;
1234 	}
1235 
1236 	return ret;
1237 }
1238 
af9015_get_rc_config(struct dvb_usb_device * d,struct dvb_usb_rc * rc)1239 static int af9015_get_rc_config(struct dvb_usb_device *d, struct dvb_usb_rc *rc)
1240 {
1241 	struct af9015_state *state = d_to_priv(d);
1242 	u16 vid = le16_to_cpu(d->udev->descriptor.idVendor);
1243 
1244 	if (state->ir_mode == AF9015_IR_MODE_DISABLED)
1245 		return 0;
1246 
1247 	/* try to load remote based module param */
1248 	if (!rc->map_name)
1249 		rc->map_name = af9015_rc_setup_match(dvb_usb_af9015_remote,
1250 						     af9015_rc_setup_modparam);
1251 
1252 	/* try to load remote based eeprom hash */
1253 	if (!rc->map_name)
1254 		rc->map_name = af9015_rc_setup_match(state->eeprom_sum,
1255 						     af9015_rc_setup_hashes);
1256 
1257 	/* try to load remote based USB iManufacturer string */
1258 	if (!rc->map_name && vid == USB_VID_AFATECH) {
1259 		/*
1260 		 * Check USB manufacturer and product strings and try
1261 		 * to determine correct remote in case of chip vendor
1262 		 * reference IDs are used.
1263 		 * DO NOT ADD ANYTHING NEW HERE. Use hashes instead.
1264 		 */
1265 		char manufacturer[10];
1266 
1267 		memset(manufacturer, 0, sizeof(manufacturer));
1268 		usb_string(d->udev, d->udev->descriptor.iManufacturer,
1269 			   manufacturer, sizeof(manufacturer));
1270 		if (!strcmp("MSI", manufacturer)) {
1271 			/*
1272 			 * iManufacturer 1 MSI
1273 			 * iProduct      2 MSI K-VOX
1274 			 */
1275 			rc->map_name = af9015_rc_setup_match(AF9015_REMOTE_MSI_DIGIVOX_MINI_II_V3,
1276 							     af9015_rc_setup_modparam);
1277 		}
1278 	}
1279 
1280 	/* load empty to enable rc */
1281 	if (!rc->map_name)
1282 		rc->map_name = RC_MAP_EMPTY;
1283 
1284 	rc->allowed_protos = RC_PROTO_BIT_NEC | RC_PROTO_BIT_NECX |
1285 						RC_PROTO_BIT_NEC32;
1286 	rc->query = af9015_rc_query;
1287 	rc->interval = 500;
1288 
1289 	return 0;
1290 }
1291 #else
1292 	#define af9015_get_rc_config NULL
1293 #endif
1294 
af9015_regmap_write(void * context,const void * data,size_t count)1295 static int af9015_regmap_write(void *context, const void *data, size_t count)
1296 {
1297 	struct dvb_usb_device *d = context;
1298 	struct usb_interface *intf = d->intf;
1299 	int ret;
1300 	u16 reg = ((u8 *)data)[0] << 8 | ((u8 *)data)[1] << 0;
1301 	u8 *val = &((u8 *)data)[2];
1302 	const unsigned int len = count - 2;
1303 	struct req_t req = {WRITE_MEMORY, 0, reg, 0, 0, len, val};
1304 
1305 	ret = af9015_ctrl_msg(d, &req);
1306 	if (ret)
1307 		goto err;
1308 
1309 	return 0;
1310 err:
1311 	dev_dbg(&intf->dev, "failed %d\n", ret);
1312 	return ret;
1313 }
1314 
af9015_regmap_read(void * context,const void * reg_buf,size_t reg_size,void * val_buf,size_t val_size)1315 static int af9015_regmap_read(void *context, const void *reg_buf,
1316 			      size_t reg_size, void *val_buf, size_t val_size)
1317 {
1318 	struct dvb_usb_device *d = context;
1319 	struct usb_interface *intf = d->intf;
1320 	int ret;
1321 	u16 reg = ((u8 *)reg_buf)[0] << 8 | ((u8 *)reg_buf)[1] << 0;
1322 	u8 *val = &((u8 *)val_buf)[0];
1323 	const unsigned int len = val_size;
1324 	struct req_t req = {READ_MEMORY, 0, reg, 0, 0, len, val};
1325 
1326 	ret = af9015_ctrl_msg(d, &req);
1327 	if (ret)
1328 		goto err;
1329 
1330 	return 0;
1331 err:
1332 	dev_dbg(&intf->dev, "failed %d\n", ret);
1333 	return ret;
1334 }
1335 
af9015_probe(struct dvb_usb_device * d)1336 static int af9015_probe(struct dvb_usb_device *d)
1337 {
1338 	struct af9015_state *state = d_to_priv(d);
1339 	struct usb_interface *intf = d->intf;
1340 	struct usb_device *udev = interface_to_usbdev(intf);
1341 	int ret;
1342 	char manufacturer[sizeof("ITE Technologies, Inc.")];
1343 	static const struct regmap_config regmap_config = {
1344 		.reg_bits    =  16,
1345 		.val_bits    =  8,
1346 	};
1347 	static const struct regmap_bus regmap_bus = {
1348 		.read = af9015_regmap_read,
1349 		.write = af9015_regmap_write,
1350 	};
1351 
1352 	dev_dbg(&intf->dev, "\n");
1353 
1354 	memset(manufacturer, 0, sizeof(manufacturer));
1355 	usb_string(udev, udev->descriptor.iManufacturer,
1356 		   manufacturer, sizeof(manufacturer));
1357 	/*
1358 	 * There is two devices having same ID but different chipset. One uses
1359 	 * AF9015 and the other IT9135 chipset. Only difference seen on lsusb
1360 	 * is iManufacturer string.
1361 	 *
1362 	 * idVendor           0x0ccd TerraTec Electronic GmbH
1363 	 * idProduct          0x0099
1364 	 * bcdDevice            2.00
1365 	 * iManufacturer           1 Afatech
1366 	 * iProduct                2 DVB-T 2
1367 	 *
1368 	 * idVendor           0x0ccd TerraTec Electronic GmbH
1369 	 * idProduct          0x0099
1370 	 * bcdDevice            2.00
1371 	 * iManufacturer           1 ITE Technologies, Inc.
1372 	 * iProduct                2 DVB-T TV Stick
1373 	 */
1374 	if ((le16_to_cpu(udev->descriptor.idVendor) == USB_VID_TERRATEC) &&
1375 	    (le16_to_cpu(udev->descriptor.idProduct) == 0x0099)) {
1376 		if (!strcmp("ITE Technologies, Inc.", manufacturer)) {
1377 			ret = -ENODEV;
1378 			dev_dbg(&intf->dev, "rejecting device\n");
1379 			goto err;
1380 		}
1381 	}
1382 
1383 	state->regmap = regmap_init(&intf->dev, &regmap_bus, d, &regmap_config);
1384 	if (IS_ERR(state->regmap)) {
1385 		ret = PTR_ERR(state->regmap);
1386 		goto err;
1387 	}
1388 
1389 	return 0;
1390 err:
1391 	dev_dbg(&intf->dev, "failed %d\n", ret);
1392 	return ret;
1393 }
1394 
af9015_disconnect(struct dvb_usb_device * d)1395 static void af9015_disconnect(struct dvb_usb_device *d)
1396 {
1397 	struct af9015_state *state = d_to_priv(d);
1398 	struct usb_interface *intf = d->intf;
1399 
1400 	dev_dbg(&intf->dev, "\n");
1401 
1402 	regmap_exit(state->regmap);
1403 }
1404 
1405 /*
1406  * Interface 0 is used by DVB-T receiver and
1407  * interface 1 is for remote controller (HID)
1408  */
1409 static const struct dvb_usb_device_properties af9015_props = {
1410 	.driver_name = KBUILD_MODNAME,
1411 	.owner = THIS_MODULE,
1412 	.adapter_nr = adapter_nr,
1413 	.size_of_priv = sizeof(struct af9015_state),
1414 
1415 	.generic_bulk_ctrl_endpoint = 0x02,
1416 	.generic_bulk_ctrl_endpoint_response = 0x81,
1417 
1418 	.probe = af9015_probe,
1419 	.disconnect = af9015_disconnect,
1420 	.identify_state = af9015_identify_state,
1421 	.firmware = AF9015_FIRMWARE,
1422 	.download_firmware = af9015_download_firmware,
1423 
1424 	.i2c_algo = &af9015_i2c_algo,
1425 	.read_config = af9015_read_config,
1426 	.frontend_attach = af9015_af9013_frontend_attach,
1427 	.frontend_detach = af9015_frontend_detach,
1428 	.tuner_attach = af9015_tuner_attach,
1429 	.init = af9015_init,
1430 	.get_rc_config = af9015_get_rc_config,
1431 	.get_stream_config = af9015_get_stream_config,
1432 	.streaming_ctrl = af9015_streaming_ctrl,
1433 
1434 	.get_adapter_count = af9015_get_adapter_count,
1435 	.adapter = {
1436 		{
1437 			.caps = DVB_USB_ADAP_HAS_PID_FILTER |
1438 				DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
1439 			.pid_filter_count = 32,
1440 			.pid_filter = af9015_pid_filter,
1441 			.pid_filter_ctrl = af9015_pid_filter_ctrl,
1442 
1443 			.stream = DVB_USB_STREAM_BULK(0x84, 6, 87 * 188),
1444 		}, {
1445 			.caps = DVB_USB_ADAP_HAS_PID_FILTER |
1446 				DVB_USB_ADAP_PID_FILTER_CAN_BE_TURNED_OFF,
1447 			.pid_filter_count = 32,
1448 			.pid_filter = af9015_pid_filter,
1449 			.pid_filter_ctrl = af9015_pid_filter_ctrl,
1450 
1451 			.stream = DVB_USB_STREAM_BULK(0x85, 6, 87 * 188),
1452 		},
1453 	},
1454 };
1455 
1456 static const struct usb_device_id af9015_id_table[] = {
1457 	{ DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9015,
1458 		&af9015_props, "Afatech AF9015 reference design", NULL) },
1459 	{ DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_AFATECH_AF9015_9016,
1460 		&af9015_props, "Afatech AF9015 reference design", NULL) },
1461 	{ DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV_DONGLE_GOLD,
1462 		&af9015_props, "Leadtek WinFast DTV Dongle Gold", RC_MAP_LEADTEK_Y04G0051) },
1463 	{ DVB_USB_DEVICE(USB_VID_PINNACLE, USB_PID_PINNACLE_PCTV71E,
1464 		&af9015_props, "Pinnacle PCTV 71e", NULL) },
1465 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U,
1466 		&af9015_props, "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)", NULL) },
1467 	{ DVB_USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_TINYTWIN,
1468 		&af9015_props, "DigitalNow TinyTwin", RC_MAP_AZUREWAVE_AD_TU700) },
1469 	{ DVB_USB_DEVICE(USB_VID_VISIONPLUS, USB_PID_AZUREWAVE_AD_TU700,
1470 		&af9015_props, "TwinHan AzureWave AD-TU700(704J)", RC_MAP_AZUREWAVE_AD_TU700) },
1471 	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_USB_XE_REV2,
1472 		&af9015_props, "TerraTec Cinergy T USB XE", NULL) },
1473 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_2T,
1474 		&af9015_props, "KWorld PlusTV Dual DVB-T PCI (DVB-T PC160-2T)", NULL) },
1475 	{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X,
1476 		&af9015_props, "AVerMedia AVerTV DVB-T Volar X", RC_MAP_AVERMEDIA_M135A) },
1477 	{ DVB_USB_DEVICE(USB_VID_XTENSIONS, USB_PID_XTENSIONS_XD_380,
1478 		&af9015_props, "Xtensions XD-380", NULL) },
1479 	{ DVB_USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGIVOX_DUO,
1480 		&af9015_props, "MSI DIGIVOX Duo", RC_MAP_MSI_DIGIVOX_III) },
1481 	{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_VOLAR_X_2,
1482 		&af9015_props, "Fujitsu-Siemens Slim Mobile USB DVB-T", NULL) },
1483 	{ DVB_USB_DEVICE(USB_VID_TELESTAR,  USB_PID_TELESTAR_STARSTICK_2,
1484 		&af9015_props, "Telestar Starstick 2", NULL) },
1485 	{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A309,
1486 		&af9015_props, "AVerMedia A309", NULL) },
1487 	{ DVB_USB_DEVICE(USB_VID_MSI_2, USB_PID_MSI_DIGI_VOX_MINI_III,
1488 		&af9015_props, "MSI Digi VOX mini III", RC_MAP_MSI_DIGIVOX_III) },
1489 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U,
1490 		&af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
1491 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_2,
1492 		&af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
1493 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_3,
1494 		&af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
1495 	{ DVB_USB_DEVICE(USB_VID_AFATECH, USB_PID_TREKSTOR_DVBT,
1496 		&af9015_props, "TrekStor DVB-T USB Stick", RC_MAP_TREKSTOR) },
1497 	{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850,
1498 		&af9015_props, "AverMedia AVerTV Volar Black HD (A850)", NULL) },
1499 	{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A805,
1500 		&af9015_props, "AverMedia AVerTV Volar GPS 805 (A805)", NULL) },
1501 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_CONCEPTRONIC_CTVDIGRCU,
1502 		&af9015_props, "Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0", NULL) },
1503 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_MC810,
1504 		&af9015_props, "KWorld Digital MC-810", NULL) },
1505 	{ DVB_USB_DEVICE(USB_VID_KYE, USB_PID_GENIUS_TVGO_DVB_T03,
1506 		&af9015_props, "Genius TVGo DVB-T03", NULL) },
1507 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_399U_2,
1508 		&af9015_props, "KWorld PlusTV Dual DVB-T Stick (DVB-T 399U)", NULL) },
1509 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_PC160_T,
1510 		&af9015_props, "KWorld PlusTV DVB-T PCI Pro Card (DVB-T PC160-T)", NULL) },
1511 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV20,
1512 		&af9015_props, "Sveon STV20 Tuner USB DVB-T HDTV", NULL) },
1513 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_TINYTWIN_2,
1514 		&af9015_props, "DigitalNow TinyTwin v2", RC_MAP_DIGITALNOW_TINYTWIN) },
1515 	{ DVB_USB_DEVICE(USB_VID_LEADTEK, USB_PID_WINFAST_DTV2000DS,
1516 		&af9015_props, "Leadtek WinFast DTV2000DS", RC_MAP_LEADTEK_Y04G0051) },
1517 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_UB383_T,
1518 		&af9015_props, "KWorld USB DVB-T Stick Mobile (UB383-T)", NULL) },
1519 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_KWORLD_395U_4,
1520 		&af9015_props, "KWorld USB DVB-T TV Stick II (VS-DVB-T 395U)", NULL) },
1521 	{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A815M,
1522 		&af9015_props, "AverMedia AVerTV Volar M (A815Mac)", NULL) },
1523 	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_RC,
1524 		&af9015_props, "TerraTec Cinergy T Stick RC", RC_MAP_TERRATEC_SLIM_2) },
1525 	/* XXX: that same ID [0ccd:0099] is used by af9035 driver too */
1526 	{ DVB_USB_DEVICE(USB_VID_TERRATEC, USB_PID_TERRATEC_CINERGY_T_STICK_DUAL_RC,
1527 		&af9015_props, "TerraTec Cinergy T Stick Dual RC", RC_MAP_TERRATEC_SLIM) },
1528 	{ DVB_USB_DEVICE(USB_VID_AVERMEDIA, USB_PID_AVERMEDIA_A850T,
1529 		&af9015_props, "AverMedia AVerTV Red HD+ (A850T)", NULL) },
1530 	{ DVB_USB_DEVICE(USB_VID_GTEK, USB_PID_TINYTWIN_3,
1531 		&af9015_props, "DigitalNow TinyTwin v3", RC_MAP_DIGITALNOW_TINYTWIN) },
1532 	{ DVB_USB_DEVICE(USB_VID_KWORLD_2, USB_PID_SVEON_STV22,
1533 		&af9015_props, "Sveon STV22 Dual USB DVB-T Tuner HDTV", RC_MAP_MSI_DIGIVOX_III) },
1534 	{ }
1535 };
1536 MODULE_DEVICE_TABLE(usb, af9015_id_table);
1537 
1538 /* usb specific object needed to register this driver with the usb subsystem */
1539 static struct usb_driver af9015_usb_driver = {
1540 	.name = KBUILD_MODNAME,
1541 	.id_table = af9015_id_table,
1542 	.probe = dvb_usbv2_probe,
1543 	.disconnect = dvb_usbv2_disconnect,
1544 	.suspend = dvb_usbv2_suspend,
1545 	.resume = dvb_usbv2_resume,
1546 	.reset_resume = dvb_usbv2_reset_resume,
1547 	.no_dynamic_id = 1,
1548 	.soft_unbind = 1,
1549 };
1550 
1551 module_usb_driver(af9015_usb_driver);
1552 
1553 MODULE_AUTHOR("Antti Palosaari <crope@iki.fi>");
1554 MODULE_DESCRIPTION("Afatech AF9015 driver");
1555 MODULE_LICENSE("GPL");
1556 MODULE_FIRMWARE(AF9015_FIRMWARE);
1557