1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /*
3    cx231xx_vbi.c - driver for Conexant Cx23100/101/102 USB video capture devices
4 
5    Copyright (C) 2008 <srinivasa.deevi at conexant dot com>
6 	Based on cx88 driver
7 
8  */
9 
10 #include "cx231xx.h"
11 #include <linux/init.h>
12 #include <linux/list.h>
13 #include <linux/module.h>
14 #include <linux/kernel.h>
15 #include <linux/bitmap.h>
16 #include <linux/i2c.h>
17 #include <linux/mm.h>
18 #include <linux/mutex.h>
19 #include <linux/slab.h>
20 
21 #include <media/v4l2-common.h>
22 #include <media/v4l2-ioctl.h>
23 #include <media/drv-intf/msp3400.h>
24 #include <media/tuner.h>
25 
26 #include "cx231xx-vbi.h"
27 
28 static inline void print_err_status(struct cx231xx *dev, int packet, int status)
29 {
30 	char *errmsg = "Unknown";
31 
32 	switch (status) {
33 	case -ENOENT:
34 		errmsg = "unlinked synchronously";
35 		break;
36 	case -ECONNRESET:
37 		errmsg = "unlinked asynchronously";
38 		break;
39 	case -ENOSR:
40 		errmsg = "Buffer error (overrun)";
41 		break;
42 	case -EPIPE:
43 		errmsg = "Stalled (device not responding)";
44 		break;
45 	case -EOVERFLOW:
46 		errmsg = "Babble (bad cable?)";
47 		break;
48 	case -EPROTO:
49 		errmsg = "Bit-stuff error (bad cable?)";
50 		break;
51 	case -EILSEQ:
52 		errmsg = "CRC/Timeout (could be anything)";
53 		break;
54 	case -ETIME:
55 		errmsg = "Device does not respond";
56 		break;
57 	}
58 	if (packet < 0) {
59 		dev_err(dev->dev,
60 			"URB status %d [%s].\n", status, errmsg);
61 	} else {
62 		dev_err(dev->dev,
63 			"URB packet %d, status %d [%s].\n",
64 			packet, status, errmsg);
65 	}
66 }
67 
68 /*
69  * Controls the isoc copy of each urb packet
70  */
71 static inline int cx231xx_isoc_vbi_copy(struct cx231xx *dev, struct urb *urb)
72 {
73 	struct cx231xx_dmaqueue *dma_q = urb->context;
74 	int rc = 1;
75 	unsigned char *p_buffer;
76 	u32 bytes_parsed = 0, buffer_size = 0;
77 	u8 sav_eav = 0;
78 
79 	if (!dev)
80 		return 0;
81 
82 	if (dev->state & DEV_DISCONNECTED)
83 		return 0;
84 
85 	if (urb->status < 0) {
86 		print_err_status(dev, -1, urb->status);
87 		if (urb->status == -ENOENT)
88 			return 0;
89 	}
90 
91 	/* get buffer pointer and length */
92 	p_buffer = urb->transfer_buffer;
93 	buffer_size = urb->actual_length;
94 
95 	if (buffer_size > 0) {
96 		bytes_parsed = 0;
97 
98 		if (dma_q->is_partial_line) {
99 			/* Handle the case where we were working on a partial
100 			   line */
101 			sav_eav = dma_q->last_sav;
102 		} else {
103 			/* Check for a SAV/EAV overlapping the
104 			   buffer boundary */
105 
106 			sav_eav = cx231xx_find_boundary_SAV_EAV(p_buffer,
107 							  dma_q->partial_buf,
108 							  &bytes_parsed);
109 		}
110 
111 		sav_eav &= 0xF0;
112 		/* Get the first line if we have some portion of an SAV/EAV from
113 		   the last buffer or a partial line */
114 		if (sav_eav) {
115 			bytes_parsed += cx231xx_get_vbi_line(dev, dma_q,
116 				sav_eav,		       /* SAV/EAV */
117 				p_buffer + bytes_parsed,       /* p_buffer */
118 				buffer_size - bytes_parsed);   /* buffer size */
119 		}
120 
121 		/* Now parse data that is completely in this buffer */
122 		dma_q->is_partial_line = 0;
123 
124 		while (bytes_parsed < buffer_size) {
125 			u32 bytes_used = 0;
126 
127 			sav_eav = cx231xx_find_next_SAV_EAV(
128 				p_buffer + bytes_parsed,	/* p_buffer */
129 				buffer_size - bytes_parsed, /* buffer size */
130 				&bytes_used);	/* bytes used to get SAV/EAV */
131 
132 			bytes_parsed += bytes_used;
133 
134 			sav_eav &= 0xF0;
135 			if (sav_eav && (bytes_parsed < buffer_size)) {
136 				bytes_parsed += cx231xx_get_vbi_line(dev,
137 					dma_q, sav_eav,	/* SAV/EAV */
138 					p_buffer+bytes_parsed, /* p_buffer */
139 					buffer_size-bytes_parsed);/*buf size*/
140 			}
141 		}
142 
143 		/* Save the last four bytes of the buffer so we can
144 		check the buffer boundary condition next time */
145 		memcpy(dma_q->partial_buf, p_buffer + buffer_size - 4, 4);
146 		bytes_parsed = 0;
147 	}
148 
149 	return rc;
150 }
151 
152 /* ------------------------------------------------------------------
153 	Vbi buf operations
154    ------------------------------------------------------------------*/
155 
156 static int vbi_queue_setup(struct vb2_queue *vq,
157 			   unsigned int *nbuffers, unsigned int *nplanes,
158 			   unsigned int sizes[], struct device *alloc_devs[])
159 {
160 	struct cx231xx *dev = vb2_get_drv_priv(vq);
161 	u32 height = 0;
162 
163 	height = ((dev->norm & V4L2_STD_625_50) ?
164 		  PAL_VBI_LINES : NTSC_VBI_LINES);
165 
166 	*nplanes = 1;
167 	sizes[0] = (dev->width * height * 2 * 2);
168 	return 0;
169 }
170 
171 /* This is called *without* dev->slock held; please keep it that way */
172 static int vbi_buf_prepare(struct vb2_buffer *vb)
173 {
174 	struct cx231xx *dev = vb2_get_drv_priv(vb->vb2_queue);
175 	u32 height = 0;
176 	u32 size;
177 
178 	height = ((dev->norm & V4L2_STD_625_50) ?
179 		  PAL_VBI_LINES : NTSC_VBI_LINES);
180 	size = ((dev->width << 1) * height * 2);
181 
182 	if (vb2_plane_size(vb, 0) < size)
183 		return -EINVAL;
184 	vb2_set_plane_payload(vb, 0, size);
185 	return 0;
186 }
187 
188 static void vbi_buf_queue(struct vb2_buffer *vb)
189 {
190 	struct cx231xx *dev = vb2_get_drv_priv(vb->vb2_queue);
191 	struct cx231xx_buffer *buf =
192 	    container_of(vb, struct cx231xx_buffer, vb.vb2_buf);
193 	struct cx231xx_dmaqueue *vidq = &dev->vbi_mode.vidq;
194 	unsigned long flags;
195 
196 	spin_lock_irqsave(&dev->vbi_mode.slock, flags);
197 	list_add_tail(&buf->list, &vidq->active);
198 	spin_unlock_irqrestore(&dev->vbi_mode.slock, flags);
199 }
200 
201 static void return_all_buffers(struct cx231xx *dev,
202 			       enum vb2_buffer_state state)
203 {
204 	struct cx231xx_dmaqueue *vidq = &dev->vbi_mode.vidq;
205 	struct cx231xx_buffer *buf, *node;
206 	unsigned long flags;
207 
208 	spin_lock_irqsave(&dev->vbi_mode.slock, flags);
209 	dev->vbi_mode.bulk_ctl.buf = NULL;
210 	list_for_each_entry_safe(buf, node, &vidq->active, list) {
211 		list_del(&buf->list);
212 		vb2_buffer_done(&buf->vb.vb2_buf, state);
213 	}
214 	spin_unlock_irqrestore(&dev->vbi_mode.slock, flags);
215 }
216 
217 static int vbi_start_streaming(struct vb2_queue *vq, unsigned int count)
218 {
219 	struct cx231xx *dev = vb2_get_drv_priv(vq);
220 	struct cx231xx_dmaqueue *vidq = &dev->vbi_mode.vidq;
221 	int ret;
222 
223 	vidq->sequence = 0;
224 	ret = cx231xx_init_vbi_isoc(dev, CX231XX_NUM_VBI_PACKETS,
225 				    CX231XX_NUM_VBI_BUFS,
226 				    dev->vbi_mode.alt_max_pkt_size[0],
227 				    cx231xx_isoc_vbi_copy);
228 	if (ret)
229 		return_all_buffers(dev, VB2_BUF_STATE_QUEUED);
230 	return ret;
231 }
232 
233 static void vbi_stop_streaming(struct vb2_queue *vq)
234 {
235 	struct cx231xx *dev = vb2_get_drv_priv(vq);
236 
237 	return_all_buffers(dev, VB2_BUF_STATE_ERROR);
238 }
239 
240 struct vb2_ops cx231xx_vbi_qops = {
241 	.queue_setup = vbi_queue_setup,
242 	.buf_prepare = vbi_buf_prepare,
243 	.buf_queue = vbi_buf_queue,
244 	.start_streaming = vbi_start_streaming,
245 	.stop_streaming = vbi_stop_streaming,
246 	.wait_prepare = vb2_ops_wait_prepare,
247 	.wait_finish = vb2_ops_wait_finish,
248 };
249 
250 /* ------------------------------------------------------------------
251 	URB control
252    ------------------------------------------------------------------*/
253 
254 /*
255  * IRQ callback, called by URB callback
256  */
257 static void cx231xx_irq_vbi_callback(struct urb *urb)
258 {
259 	struct cx231xx_dmaqueue *dma_q = urb->context;
260 	struct cx231xx_video_mode *vmode =
261 	    container_of(dma_q, struct cx231xx_video_mode, vidq);
262 	struct cx231xx *dev = container_of(vmode, struct cx231xx, vbi_mode);
263 	unsigned long flags;
264 
265 	switch (urb->status) {
266 	case 0:		/* success */
267 	case -ETIMEDOUT:	/* NAK */
268 		break;
269 	case -ECONNRESET:	/* kill */
270 	case -ENOENT:
271 	case -ESHUTDOWN:
272 		return;
273 	default:		/* error */
274 		dev_err(dev->dev,
275 			"urb completion error %d.\n", urb->status);
276 		break;
277 	}
278 
279 	/* Copy data from URB */
280 	spin_lock_irqsave(&dev->vbi_mode.slock, flags);
281 	dev->vbi_mode.bulk_ctl.bulk_copy(dev, urb);
282 	spin_unlock_irqrestore(&dev->vbi_mode.slock, flags);
283 
284 	/* Reset status */
285 	urb->status = 0;
286 
287 	urb->status = usb_submit_urb(urb, GFP_ATOMIC);
288 	if (urb->status) {
289 		dev_err(dev->dev, "urb resubmit failed (error=%i)\n",
290 			urb->status);
291 	}
292 }
293 
294 /*
295  * Stop and Deallocate URBs
296  */
297 void cx231xx_uninit_vbi_isoc(struct cx231xx *dev)
298 {
299 	struct urb *urb;
300 	int i;
301 
302 	dev_dbg(dev->dev, "called cx231xx_uninit_vbi_isoc\n");
303 
304 	dev->vbi_mode.bulk_ctl.nfields = -1;
305 	for (i = 0; i < dev->vbi_mode.bulk_ctl.num_bufs; i++) {
306 		urb = dev->vbi_mode.bulk_ctl.urb[i];
307 		if (urb) {
308 			if (!irqs_disabled())
309 				usb_kill_urb(urb);
310 			else
311 				usb_unlink_urb(urb);
312 
313 			if (dev->vbi_mode.bulk_ctl.transfer_buffer[i]) {
314 
315 				kfree(dev->vbi_mode.bulk_ctl.
316 				      transfer_buffer[i]);
317 				dev->vbi_mode.bulk_ctl.transfer_buffer[i] =
318 				    NULL;
319 			}
320 			usb_free_urb(urb);
321 			dev->vbi_mode.bulk_ctl.urb[i] = NULL;
322 		}
323 		dev->vbi_mode.bulk_ctl.transfer_buffer[i] = NULL;
324 	}
325 
326 	kfree(dev->vbi_mode.bulk_ctl.urb);
327 	kfree(dev->vbi_mode.bulk_ctl.transfer_buffer);
328 
329 	dev->vbi_mode.bulk_ctl.urb = NULL;
330 	dev->vbi_mode.bulk_ctl.transfer_buffer = NULL;
331 	dev->vbi_mode.bulk_ctl.num_bufs = 0;
332 
333 	cx231xx_capture_start(dev, 0, Vbi);
334 }
335 EXPORT_SYMBOL_GPL(cx231xx_uninit_vbi_isoc);
336 
337 /*
338  * Allocate URBs and start IRQ
339  */
340 int cx231xx_init_vbi_isoc(struct cx231xx *dev, int max_packets,
341 			  int num_bufs, int max_pkt_size,
342 			  int (*bulk_copy) (struct cx231xx *dev,
343 					    struct urb *urb))
344 {
345 	struct cx231xx_dmaqueue *dma_q = &dev->vbi_mode.vidq;
346 	int i;
347 	int sb_size, pipe;
348 	struct urb *urb;
349 	int rc;
350 
351 	dev_dbg(dev->dev, "called cx231xx_vbi_isoc\n");
352 
353 	/* De-allocates all pending stuff */
354 	cx231xx_uninit_vbi_isoc(dev);
355 
356 	/* clear if any halt */
357 	usb_clear_halt(dev->udev,
358 		       usb_rcvbulkpipe(dev->udev,
359 				       dev->vbi_mode.end_point_addr));
360 
361 	dev->vbi_mode.bulk_ctl.bulk_copy = bulk_copy;
362 	dev->vbi_mode.bulk_ctl.num_bufs = num_bufs;
363 	dma_q->pos = 0;
364 	dma_q->is_partial_line = 0;
365 	dma_q->last_sav = 0;
366 	dma_q->current_field = -1;
367 	dma_q->bytes_left_in_line = dev->width << 1;
368 	dma_q->lines_per_field = ((dev->norm & V4L2_STD_625_50) ?
369 				  PAL_VBI_LINES : NTSC_VBI_LINES);
370 	dma_q->lines_completed = 0;
371 	for (i = 0; i < 8; i++)
372 		dma_q->partial_buf[i] = 0;
373 
374 	dev->vbi_mode.bulk_ctl.urb = kcalloc(num_bufs, sizeof(void *),
375 					     GFP_KERNEL);
376 	if (!dev->vbi_mode.bulk_ctl.urb) {
377 		dev_err(dev->dev,
378 			"cannot alloc memory for usb buffers\n");
379 		return -ENOMEM;
380 	}
381 
382 	dev->vbi_mode.bulk_ctl.transfer_buffer =
383 	    kcalloc(num_bufs, sizeof(void *), GFP_KERNEL);
384 	if (!dev->vbi_mode.bulk_ctl.transfer_buffer) {
385 		dev_err(dev->dev,
386 			"cannot allocate memory for usbtransfer\n");
387 		kfree(dev->vbi_mode.bulk_ctl.urb);
388 		return -ENOMEM;
389 	}
390 
391 	dev->vbi_mode.bulk_ctl.max_pkt_size = max_pkt_size;
392 	dev->vbi_mode.bulk_ctl.buf = NULL;
393 
394 	sb_size = max_packets * dev->vbi_mode.bulk_ctl.max_pkt_size;
395 
396 	/* allocate urbs and transfer buffers */
397 	for (i = 0; i < dev->vbi_mode.bulk_ctl.num_bufs; i++) {
398 
399 		urb = usb_alloc_urb(0, GFP_KERNEL);
400 		if (!urb) {
401 			cx231xx_uninit_vbi_isoc(dev);
402 			return -ENOMEM;
403 		}
404 		dev->vbi_mode.bulk_ctl.urb[i] = urb;
405 		urb->transfer_flags = 0;
406 
407 		dev->vbi_mode.bulk_ctl.transfer_buffer[i] =
408 		    kzalloc(sb_size, GFP_KERNEL);
409 		if (!dev->vbi_mode.bulk_ctl.transfer_buffer[i]) {
410 			dev_err(dev->dev,
411 				"unable to allocate %i bytes for transfer buffer %i\n",
412 				sb_size, i);
413 			cx231xx_uninit_vbi_isoc(dev);
414 			return -ENOMEM;
415 		}
416 
417 		pipe = usb_rcvbulkpipe(dev->udev, dev->vbi_mode.end_point_addr);
418 		usb_fill_bulk_urb(urb, dev->udev, pipe,
419 				  dev->vbi_mode.bulk_ctl.transfer_buffer[i],
420 				  sb_size, cx231xx_irq_vbi_callback, dma_q);
421 	}
422 
423 	init_waitqueue_head(&dma_q->wq);
424 
425 	/* submit urbs and enables IRQ */
426 	for (i = 0; i < dev->vbi_mode.bulk_ctl.num_bufs; i++) {
427 		rc = usb_submit_urb(dev->vbi_mode.bulk_ctl.urb[i], GFP_ATOMIC);
428 		if (rc) {
429 			dev_err(dev->dev,
430 				"submit of urb %i failed (error=%i)\n", i, rc);
431 			cx231xx_uninit_vbi_isoc(dev);
432 			return rc;
433 		}
434 	}
435 
436 	cx231xx_capture_start(dev, 1, Vbi);
437 
438 	return 0;
439 }
440 EXPORT_SYMBOL_GPL(cx231xx_init_vbi_isoc);
441 
442 u32 cx231xx_get_vbi_line(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q,
443 			 u8 sav_eav, u8 *p_buffer, u32 buffer_size)
444 {
445 	u32 bytes_copied = 0;
446 	int current_field = -1;
447 
448 	switch (sav_eav) {
449 
450 	case SAV_VBI_FIELD1:
451 		current_field = 1;
452 		break;
453 
454 	case SAV_VBI_FIELD2:
455 		current_field = 2;
456 		break;
457 	default:
458 		break;
459 	}
460 
461 	if (current_field < 0)
462 		return bytes_copied;
463 
464 	dma_q->last_sav = sav_eav;
465 
466 	bytes_copied =
467 	    cx231xx_copy_vbi_line(dev, dma_q, p_buffer, buffer_size,
468 				  current_field);
469 
470 	return bytes_copied;
471 }
472 
473 /*
474  * Announces that a buffer were filled and request the next
475  */
476 static inline void vbi_buffer_filled(struct cx231xx *dev,
477 				     struct cx231xx_dmaqueue *dma_q,
478 				     struct cx231xx_buffer *buf)
479 {
480 	/* Advice that buffer was filled */
481 	/* dev_dbg(dev->dev, "[%p/%d] wakeup\n", buf, buf->vb.index); */
482 
483 	buf->vb.sequence = dma_q->sequence++;
484 	buf->vb.vb2_buf.timestamp = ktime_get_ns();
485 
486 	dev->vbi_mode.bulk_ctl.buf = NULL;
487 
488 	list_del(&buf->list);
489 	vb2_buffer_done(&buf->vb.vb2_buf, VB2_BUF_STATE_DONE);
490 }
491 
492 u32 cx231xx_copy_vbi_line(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q,
493 			  u8 *p_line, u32 length, int field_number)
494 {
495 	u32 bytes_to_copy;
496 	struct cx231xx_buffer *buf;
497 	u32 _line_size = dev->width * 2;
498 
499 	if (dma_q->current_field == -1) {
500 		/* Just starting up */
501 		cx231xx_reset_vbi_buffer(dev, dma_q);
502 	}
503 
504 	if (dma_q->current_field != field_number)
505 		dma_q->lines_completed = 0;
506 
507 	/* get the buffer pointer */
508 	buf = dev->vbi_mode.bulk_ctl.buf;
509 
510 	/* Remember the field number for next time */
511 	dma_q->current_field = field_number;
512 
513 	bytes_to_copy = dma_q->bytes_left_in_line;
514 	if (bytes_to_copy > length)
515 		bytes_to_copy = length;
516 
517 	if (dma_q->lines_completed >= dma_q->lines_per_field) {
518 		dma_q->bytes_left_in_line -= bytes_to_copy;
519 		dma_q->is_partial_line =
520 		    (dma_q->bytes_left_in_line == 0) ? 0 : 1;
521 		return 0;
522 	}
523 
524 	dma_q->is_partial_line = 1;
525 
526 	/* If we don't have a buffer, just return the number of bytes we would
527 	   have copied if we had a buffer. */
528 	if (!buf) {
529 		dma_q->bytes_left_in_line -= bytes_to_copy;
530 		dma_q->is_partial_line =
531 		    (dma_q->bytes_left_in_line == 0) ? 0 : 1;
532 		return bytes_to_copy;
533 	}
534 
535 	/* copy the data to video buffer */
536 	cx231xx_do_vbi_copy(dev, dma_q, p_line, bytes_to_copy);
537 
538 	dma_q->pos += bytes_to_copy;
539 	dma_q->bytes_left_in_line -= bytes_to_copy;
540 
541 	if (dma_q->bytes_left_in_line == 0) {
542 
543 		dma_q->bytes_left_in_line = _line_size;
544 		dma_q->lines_completed++;
545 		dma_q->is_partial_line = 0;
546 
547 		if (cx231xx_is_vbi_buffer_done(dev, dma_q) && buf) {
548 
549 			vbi_buffer_filled(dev, dma_q, buf);
550 
551 			dma_q->pos = 0;
552 			dma_q->lines_completed = 0;
553 			cx231xx_reset_vbi_buffer(dev, dma_q);
554 		}
555 	}
556 
557 	return bytes_to_copy;
558 }
559 
560 /*
561  * video-buf generic routine to get the next available buffer
562  */
563 static inline void get_next_vbi_buf(struct cx231xx_dmaqueue *dma_q,
564 				    struct cx231xx_buffer **buf)
565 {
566 	struct cx231xx_video_mode *vmode =
567 	    container_of(dma_q, struct cx231xx_video_mode, vidq);
568 	struct cx231xx *dev = container_of(vmode, struct cx231xx, vbi_mode);
569 	char *outp;
570 
571 	if (list_empty(&dma_q->active)) {
572 		dev_err(dev->dev, "No active queue to serve\n");
573 		dev->vbi_mode.bulk_ctl.buf = NULL;
574 		*buf = NULL;
575 		return;
576 	}
577 
578 	/* Get the next buffer */
579 	*buf = list_entry(dma_q->active.next, struct cx231xx_buffer, list);
580 
581 	/* Cleans up buffer - Useful for testing for frame/URB loss */
582 	outp = vb2_plane_vaddr(&(*buf)->vb.vb2_buf, 0);
583 	memset(outp, 0, vb2_plane_size(&(*buf)->vb.vb2_buf, 0));
584 
585 	dev->vbi_mode.bulk_ctl.buf = *buf;
586 
587 	return;
588 }
589 
590 void cx231xx_reset_vbi_buffer(struct cx231xx *dev,
591 			      struct cx231xx_dmaqueue *dma_q)
592 {
593 	struct cx231xx_buffer *buf;
594 
595 	buf = dev->vbi_mode.bulk_ctl.buf;
596 
597 	if (buf == NULL) {
598 		/* first try to get the buffer */
599 		get_next_vbi_buf(dma_q, &buf);
600 
601 		dma_q->pos = 0;
602 		dma_q->current_field = -1;
603 	}
604 
605 	dma_q->bytes_left_in_line = dev->width << 1;
606 	dma_q->lines_completed = 0;
607 }
608 
609 int cx231xx_do_vbi_copy(struct cx231xx *dev, struct cx231xx_dmaqueue *dma_q,
610 			u8 *p_buffer, u32 bytes_to_copy)
611 {
612 	u8 *p_out_buffer = NULL;
613 	u32 current_line_bytes_copied = 0;
614 	struct cx231xx_buffer *buf;
615 	u32 _line_size = dev->width << 1;
616 	void *startwrite;
617 	int offset, lencopy;
618 
619 	buf = dev->vbi_mode.bulk_ctl.buf;
620 
621 	if (buf == NULL)
622 		return -EINVAL;
623 
624 	p_out_buffer = vb2_plane_vaddr(&buf->vb.vb2_buf, 0);
625 
626 	if (dma_q->bytes_left_in_line != _line_size) {
627 		current_line_bytes_copied =
628 		    _line_size - dma_q->bytes_left_in_line;
629 	}
630 
631 	offset = (dma_q->lines_completed * _line_size) +
632 		 current_line_bytes_copied;
633 
634 	if (dma_q->current_field == 2) {
635 		/* Populate the second half of the frame */
636 		offset += (dev->width * 2 * dma_q->lines_per_field);
637 	}
638 
639 	/* prepare destination address */
640 	startwrite = p_out_buffer + offset;
641 
642 	lencopy = dma_q->bytes_left_in_line > bytes_to_copy ?
643 		  bytes_to_copy : dma_q->bytes_left_in_line;
644 
645 	memcpy(startwrite, p_buffer, lencopy);
646 
647 	return 0;
648 }
649 
650 u8 cx231xx_is_vbi_buffer_done(struct cx231xx *dev,
651 			      struct cx231xx_dmaqueue *dma_q)
652 {
653 	u32 height = 0;
654 
655 	height = ((dev->norm & V4L2_STD_625_50) ?
656 		  PAL_VBI_LINES : NTSC_VBI_LINES);
657 	if (dma_q->lines_completed == height && dma_q->current_field == 2)
658 		return 1;
659 	else
660 		return 0;
661 }
662