1 /* 2 cx231xx-pcb-cfg.h - driver for Conexant 3 Cx23100/101/102 USB video capture devices 4 5 Copyright (C) 2008 <srinivasa.deevi at conexant dot com> 6 7 This program is free software; you can redistribute it and/or modify 8 it under the terms of the GNU General Public License as published by 9 the Free Software Foundation; either version 2 of the License, or 10 (at your option) any later version. 11 12 This program is distributed in the hope that it will be useful, 13 but WITHOUT ANY WARRANTY; without even the implied warranty of 14 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 15 GNU General Public License for more details. 16 17 You should have received a copy of the GNU General Public License 18 along with this program; if not, write to the Free Software 19 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 20 */ 21 22 #ifndef _PCB_CONFIG_H_ 23 #define _PCB_CONFIG_H_ 24 25 #include <linux/init.h> 26 #include <linux/module.h> 27 28 /*************************************************************************** 29 * Class Information * 30 ***************************************************************************/ 31 #define CLASS_DEFAULT 0xFF 32 33 enum VENDOR_REQUEST_TYPE { 34 /* Set/Get I2C */ 35 VRT_SET_I2C0 = 0x0, 36 VRT_SET_I2C1 = 0x1, 37 VRT_SET_I2C2 = 0x2, 38 VRT_GET_I2C0 = 0x4, 39 VRT_GET_I2C1 = 0x5, 40 VRT_GET_I2C2 = 0x6, 41 42 /* Set/Get GPIO */ 43 VRT_SET_GPIO = 0x8, 44 VRT_GET_GPIO = 0x9, 45 46 /* Set/Get GPIE */ 47 VRT_SET_GPIE = 0xA, 48 VRT_GET_GPIE = 0xB, 49 50 /* Set/Get Register Control/Status */ 51 VRT_SET_REGISTER = 0xC, 52 VRT_GET_REGISTER = 0xD, 53 54 /* Get Extended Compat ID Descriptor */ 55 VRT_GET_EXTCID_DESC = 0xFF, 56 }; 57 58 enum BYTE_ENABLE_MASK { 59 ENABLE_ONE_BYTE = 0x1, 60 ENABLE_TWE_BYTE = 0x3, 61 ENABLE_THREE_BYTE = 0x7, 62 ENABLE_FOUR_BYTE = 0xF, 63 }; 64 65 #define SPEED_MASK 0x1 66 enum USB_SPEED{ 67 FULL_SPEED = 0x0, /* 0: full speed */ 68 HIGH_SPEED = 0x1 /* 1: high speed */ 69 }; 70 71 #define TS_MASK 0x6 72 enum TS_PORT{ 73 NO_TS_PORT = 0x0, /* 2'b00: Neither port used. PCB not a Hybrid, 74 only offers Analog TV or Video */ 75 TS1_PORT = 0x4, /* 2'b10: TS1 Input (Hybrid mode : 76 Digital or External Analog/Compressed source) */ 77 TS1_TS2_PORT = 0x6, /* 2'b11: TS1 & TS2 Inputs 78 (Dual inputs from Digital and/or 79 External Analog/Compressed sources) */ 80 TS1_EXT_CLOCK = 0x6, /* 2'b11: TS1 & TS2 as selector 81 to external clock */ 82 TS1VIP_TS2_PORT = 0x2 /* 2'b01: TS1 used as 656/VIP Output, 83 TS2 Input (from Compressor) */ 84 }; 85 86 #define EAVP_MASK 0x8 87 enum EAV_PRESENT{ 88 NO_EXTERNAL_AV = 0x0, /* 0: No External A/V inputs 89 (no need for i2s blcok), 90 Analog Tuner must be present */ 91 EXTERNAL_AV = 0x8 /* 1: External A/V inputs 92 present (requires i2s blk) */ 93 }; 94 95 #define ATM_MASK 0x30 96 enum AT_MODE{ 97 DIF_TUNER = 0x30, /* 2'b11: IF Tuner (requires use of DIF) */ 98 BASEBAND_SOUND = 0x20, /* 2'b10: Baseband Composite & 99 Sound-IF Signals present */ 100 NO_TUNER = 0x10 /* 2'b0x: No Analog Tuner present */ 101 }; 102 103 #define PWR_SEL_MASK 0x40 104 enum POWE_TYPE{ 105 SELF_POWER = 0x0, /* 0: self power */ 106 BUS_POWER = 0x40 /* 1: bus power */ 107 }; 108 109 enum USB_POWE_TYPE{ 110 USB_SELF_POWER = 0, 111 USB_BUS_POWER 112 }; 113 114 #define BO_0_MASK 0x80 115 enum AVDEC_STATUS{ 116 AVDEC_DISABLE = 0x0, /* 0: A/V Decoder Disabled */ 117 AVDEC_ENABLE = 0x80 /* 1: A/V Decoder Enabled */ 118 }; 119 120 #define BO_1_MASK 0x100 121 122 #define BUSPOWER_MASK 0xC4 /* for Polaris spec 0.8 */ 123 #define SELFPOWER_MASK 0x86 124 125 /***************************************************************************/ 126 #define NOT_DECIDE_YET 0xFE 127 #define NOT_SUPPORTED 0xFF 128 129 /*************************************************************************** 130 * for mod field use * 131 ***************************************************************************/ 132 #define MOD_DIGITAL 0x1 133 #define MOD_ANALOG 0x2 134 #define MOD_DIF 0x4 135 #define MOD_EXTERNAL 0x8 136 #define CAP_ALL_MOD 0x0f 137 138 /*************************************************************************** 139 * source define * 140 ***************************************************************************/ 141 #define SOURCE_DIGITAL 0x1 142 #define SOURCE_ANALOG 0x2 143 #define SOURCE_DIF 0x4 144 #define SOURCE_EXTERNAL 0x8 145 #define SOURCE_TS_BDA 0x10 146 #define SOURCE_TS_ENCODE 0x20 147 #define SOURCE_TS_EXTERNAL 0x40 148 149 /*************************************************************************** 150 * interface information define * 151 ***************************************************************************/ 152 struct INTERFACE_INFO { 153 u8 interrupt_index; 154 u8 ts1_index; 155 u8 ts2_index; 156 u8 audio_index; 157 u8 video_index; 158 u8 vanc_index; /* VBI */ 159 u8 hanc_index; /* Sliced CC */ 160 u8 ir_index; 161 }; 162 163 enum INDEX_INTERFACE_INFO{ 164 INDEX_INTERRUPT = 0x0, 165 INDEX_TS1, 166 INDEX_TS2, 167 INDEX_AUDIO, 168 INDEX_VIDEO, 169 INDEX_VANC, 170 INDEX_HANC, 171 INDEX_IR, 172 }; 173 174 /*************************************************************************** 175 * configuration information define * 176 ***************************************************************************/ 177 struct CONFIG_INFO { 178 u8 config_index; 179 struct INTERFACE_INFO interface_info; 180 }; 181 182 struct pcb_config { 183 u8 index; 184 u8 type; /* bus power or self power, 185 self power--0, bus_power--1 */ 186 u8 speed; /* usb speed, 2.0--1, 1.1--0 */ 187 u8 mode; /* digital , anlog, dif or external A/V */ 188 u32 ts1_source; /* three source -- BDA,External,encode */ 189 u32 ts2_source; 190 u32 analog_source; 191 u8 digital_index; /* bus-power used */ 192 u8 analog_index; /* bus-power used */ 193 u8 dif_index; /* bus-power used */ 194 u8 external_index; /* bus-power used */ 195 u8 config_num; /* current config num, 0,1,2, 196 for self-power, always 0 */ 197 struct CONFIG_INFO hs_config_info[3]; 198 struct CONFIG_INFO fs_config_info[3]; 199 }; 200 201 enum INDEX_PCB_CONFIG{ 202 INDEX_SELFPOWER_DIGITAL_ONLY = 0x0, 203 INDEX_SELFPOWER_DUAL_DIGITAL, 204 INDEX_SELFPOWER_ANALOG_ONLY, 205 INDEX_SELFPOWER_DUAL, 206 INDEX_SELFPOWER_TRIPLE, 207 INDEX_SELFPOWER_COMPRESSOR, 208 INDEX_BUSPOWER_DIGITAL_ONLY, 209 INDEX_BUSPOWER_ANALOG_ONLY, 210 INDEX_BUSPOWER_DIF_ONLY, 211 INDEX_BUSPOWER_EXTERNAL_ONLY, 212 INDEX_BUSPOWER_EXTERNAL_ANALOG, 213 INDEX_BUSPOWER_EXTERNAL_DIF, 214 INDEX_BUSPOWER_EXTERNAL_DIGITAL, 215 INDEX_BUSPOWER_DIGITAL_ANALOG, 216 INDEX_BUSPOWER_DIGITAL_DIF, 217 INDEX_BUSPOWER_DIGITAL_ANALOG_EXTERNAL, 218 INDEX_BUSPOWER_DIGITAL_DIF_EXTERNAL, 219 }; 220 221 /***************************************************************************/ 222 struct cx231xx; 223 224 int initialize_cx231xx(struct cx231xx *p_dev); 225 226 #endif 227