1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 cx231xx_avcore.c - driver for Conexant Cx23100/101/102 4 USB video capture devices 5 6 Copyright (C) 2008 <srinivasa.deevi at conexant dot com> 7 8 This program contains the specific code to control the avdecoder chip and 9 other related usb control functions for cx231xx based chipset. 10 11 */ 12 13 #include "cx231xx.h" 14 #include <linux/init.h> 15 #include <linux/list.h> 16 #include <linux/module.h> 17 #include <linux/kernel.h> 18 #include <linux/bitmap.h> 19 #include <linux/i2c.h> 20 #include <linux/mm.h> 21 #include <linux/mutex.h> 22 #include <media/tuner.h> 23 24 #include <media/v4l2-common.h> 25 #include <media/v4l2-ioctl.h> 26 27 #include "cx231xx-dif.h" 28 29 #define TUNER_MODE_FM_RADIO 0 30 /****************************************************************************** 31 -: BLOCK ARRANGEMENT :- 32 I2S block ----------------------| 33 [I2S audio] | 34 | 35 Analog Front End --> Direct IF -|-> Cx25840 --> Audio 36 [video & audio] | [Audio] 37 | 38 |-> Cx25840 --> Video 39 [Video] 40 41 *******************************************************************************/ 42 /****************************************************************************** 43 * VERVE REGISTER * 44 * * 45 ******************************************************************************/ 46 static int verve_write_byte(struct cx231xx *dev, u8 saddr, u8 data) 47 { 48 return cx231xx_write_i2c_data(dev, VERVE_I2C_ADDRESS, 49 saddr, 1, data, 1); 50 } 51 52 static int verve_read_byte(struct cx231xx *dev, u8 saddr, u8 *data) 53 { 54 int status; 55 u32 temp = 0; 56 57 status = cx231xx_read_i2c_data(dev, VERVE_I2C_ADDRESS, 58 saddr, 1, &temp, 1); 59 *data = (u8) temp; 60 return status; 61 } 62 void initGPIO(struct cx231xx *dev) 63 { 64 u32 _gpio_direction = 0; 65 u32 value = 0; 66 u8 val = 0; 67 68 _gpio_direction = _gpio_direction & 0xFC0003FF; 69 _gpio_direction = _gpio_direction | 0x03FDFC00; 70 cx231xx_send_gpio_cmd(dev, _gpio_direction, (u8 *)&value, 4, 0, 0); 71 72 verve_read_byte(dev, 0x07, &val); 73 dev_dbg(dev->dev, "verve_read_byte address0x07=0x%x\n", val); 74 verve_write_byte(dev, 0x07, 0xF4); 75 verve_read_byte(dev, 0x07, &val); 76 dev_dbg(dev->dev, "verve_read_byte address0x07=0x%x\n", val); 77 78 cx231xx_capture_start(dev, 1, Vbi); 79 80 cx231xx_mode_register(dev, EP_MODE_SET, 0x0500FE00); 81 cx231xx_mode_register(dev, GBULK_BIT_EN, 0xFFFDFFFF); 82 83 } 84 void uninitGPIO(struct cx231xx *dev) 85 { 86 u8 value[4] = { 0, 0, 0, 0 }; 87 88 cx231xx_capture_start(dev, 0, Vbi); 89 verve_write_byte(dev, 0x07, 0x14); 90 cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, 91 0x68, value, 4); 92 } 93 94 /****************************************************************************** 95 * A F E - B L O C K C O N T R O L functions * 96 * [ANALOG FRONT END] * 97 ******************************************************************************/ 98 static int afe_write_byte(struct cx231xx *dev, u16 saddr, u8 data) 99 { 100 return cx231xx_write_i2c_data(dev, AFE_DEVICE_ADDRESS, 101 saddr, 2, data, 1); 102 } 103 104 static int afe_read_byte(struct cx231xx *dev, u16 saddr, u8 *data) 105 { 106 int status; 107 u32 temp = 0; 108 109 status = cx231xx_read_i2c_data(dev, AFE_DEVICE_ADDRESS, 110 saddr, 2, &temp, 1); 111 *data = (u8) temp; 112 return status; 113 } 114 115 int cx231xx_afe_init_super_block(struct cx231xx *dev, u32 ref_count) 116 { 117 int status = 0; 118 u8 temp = 0; 119 u8 afe_power_status = 0; 120 int i = 0; 121 122 /* super block initialize */ 123 temp = (u8) (ref_count & 0xff); 124 status = afe_write_byte(dev, SUP_BLK_TUNE2, temp); 125 if (status < 0) 126 return status; 127 128 status = afe_read_byte(dev, SUP_BLK_TUNE2, &afe_power_status); 129 if (status < 0) 130 return status; 131 132 temp = (u8) ((ref_count & 0x300) >> 8); 133 temp |= 0x40; 134 status = afe_write_byte(dev, SUP_BLK_TUNE1, temp); 135 if (status < 0) 136 return status; 137 138 status = afe_write_byte(dev, SUP_BLK_PLL2, 0x0f); 139 if (status < 0) 140 return status; 141 142 /* enable pll */ 143 while (afe_power_status != 0x18) { 144 status = afe_write_byte(dev, SUP_BLK_PWRDN, 0x18); 145 if (status < 0) { 146 dev_dbg(dev->dev, 147 "%s: Init Super Block failed in send cmd\n", 148 __func__); 149 break; 150 } 151 152 status = afe_read_byte(dev, SUP_BLK_PWRDN, &afe_power_status); 153 afe_power_status &= 0xff; 154 if (status < 0) { 155 dev_dbg(dev->dev, 156 "%s: Init Super Block failed in receive cmd\n", 157 __func__); 158 break; 159 } 160 i++; 161 if (i == 10) { 162 dev_dbg(dev->dev, 163 "%s: Init Super Block force break in loop !!!!\n", 164 __func__); 165 status = -1; 166 break; 167 } 168 } 169 170 if (status < 0) 171 return status; 172 173 /* start tuning filter */ 174 status = afe_write_byte(dev, SUP_BLK_TUNE3, 0x40); 175 if (status < 0) 176 return status; 177 178 msleep(5); 179 180 /* exit tuning */ 181 status = afe_write_byte(dev, SUP_BLK_TUNE3, 0x00); 182 183 return status; 184 } 185 186 int cx231xx_afe_init_channels(struct cx231xx *dev) 187 { 188 int status = 0; 189 190 /* power up all 3 channels, clear pd_buffer */ 191 status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1, 0x00); 192 status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2, 0x00); 193 status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3, 0x00); 194 195 /* Enable quantizer calibration */ 196 status = afe_write_byte(dev, ADC_COM_QUANT, 0x02); 197 198 /* channel initialize, force modulator (fb) reset */ 199 status = afe_write_byte(dev, ADC_FB_FRCRST_CH1, 0x17); 200 status = afe_write_byte(dev, ADC_FB_FRCRST_CH2, 0x17); 201 status = afe_write_byte(dev, ADC_FB_FRCRST_CH3, 0x17); 202 203 /* start quantilizer calibration */ 204 status = afe_write_byte(dev, ADC_CAL_ATEST_CH1, 0x10); 205 status = afe_write_byte(dev, ADC_CAL_ATEST_CH2, 0x10); 206 status = afe_write_byte(dev, ADC_CAL_ATEST_CH3, 0x10); 207 msleep(5); 208 209 /* exit modulator (fb) reset */ 210 status = afe_write_byte(dev, ADC_FB_FRCRST_CH1, 0x07); 211 status = afe_write_byte(dev, ADC_FB_FRCRST_CH2, 0x07); 212 status = afe_write_byte(dev, ADC_FB_FRCRST_CH3, 0x07); 213 214 /* enable the pre_clamp in each channel for single-ended input */ 215 status = afe_write_byte(dev, ADC_NTF_PRECLMP_EN_CH1, 0xf0); 216 status = afe_write_byte(dev, ADC_NTF_PRECLMP_EN_CH2, 0xf0); 217 status = afe_write_byte(dev, ADC_NTF_PRECLMP_EN_CH3, 0xf0); 218 219 /* use diode instead of resistor, so set term_en to 0, res_en to 0 */ 220 status = cx231xx_reg_mask_write(dev, AFE_DEVICE_ADDRESS, 8, 221 ADC_QGAIN_RES_TRM_CH1, 3, 7, 0x00); 222 status = cx231xx_reg_mask_write(dev, AFE_DEVICE_ADDRESS, 8, 223 ADC_QGAIN_RES_TRM_CH2, 3, 7, 0x00); 224 status = cx231xx_reg_mask_write(dev, AFE_DEVICE_ADDRESS, 8, 225 ADC_QGAIN_RES_TRM_CH3, 3, 7, 0x00); 226 227 /* dynamic element matching off */ 228 status = afe_write_byte(dev, ADC_DCSERVO_DEM_CH1, 0x03); 229 status = afe_write_byte(dev, ADC_DCSERVO_DEM_CH2, 0x03); 230 status = afe_write_byte(dev, ADC_DCSERVO_DEM_CH3, 0x03); 231 232 return status; 233 } 234 235 int cx231xx_afe_setup_AFE_for_baseband(struct cx231xx *dev) 236 { 237 u8 c_value = 0; 238 int status = 0; 239 240 status = afe_read_byte(dev, ADC_PWRDN_CLAMP_CH2, &c_value); 241 c_value &= (~(0x50)); 242 status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2, c_value); 243 244 return status; 245 } 246 247 /* 248 The Analog Front End in Cx231xx has 3 channels. These 249 channels are used to share between different inputs 250 like tuner, s-video and composite inputs. 251 252 channel 1 ----- pin 1 to pin4(in reg is 1-4) 253 channel 2 ----- pin 5 to pin8(in reg is 5-8) 254 channel 3 ----- pin 9 to pin 12(in reg is 9-11) 255 */ 256 int cx231xx_afe_set_input_mux(struct cx231xx *dev, u32 input_mux) 257 { 258 u8 ch1_setting = (u8) input_mux; 259 u8 ch2_setting = (u8) (input_mux >> 8); 260 u8 ch3_setting = (u8) (input_mux >> 16); 261 int status = 0; 262 u8 value = 0; 263 264 if (ch1_setting != 0) { 265 status = afe_read_byte(dev, ADC_INPUT_CH1, &value); 266 value &= ~INPUT_SEL_MASK; 267 value |= (ch1_setting - 1) << 4; 268 value &= 0xff; 269 status = afe_write_byte(dev, ADC_INPUT_CH1, value); 270 } 271 272 if (ch2_setting != 0) { 273 status = afe_read_byte(dev, ADC_INPUT_CH2, &value); 274 value &= ~INPUT_SEL_MASK; 275 value |= (ch2_setting - 1) << 4; 276 value &= 0xff; 277 status = afe_write_byte(dev, ADC_INPUT_CH2, value); 278 } 279 280 /* For ch3_setting, the value to put in the register is 281 7 less than the input number */ 282 if (ch3_setting != 0) { 283 status = afe_read_byte(dev, ADC_INPUT_CH3, &value); 284 value &= ~INPUT_SEL_MASK; 285 value |= (ch3_setting - 1) << 4; 286 value &= 0xff; 287 status = afe_write_byte(dev, ADC_INPUT_CH3, value); 288 } 289 290 return status; 291 } 292 293 int cx231xx_afe_set_mode(struct cx231xx *dev, enum AFE_MODE mode) 294 { 295 int status = 0; 296 297 /* 298 * FIXME: We need to implement the AFE code for LOW IF and for HI IF. 299 * Currently, only baseband works. 300 */ 301 302 switch (mode) { 303 case AFE_MODE_LOW_IF: 304 cx231xx_Setup_AFE_for_LowIF(dev); 305 break; 306 case AFE_MODE_BASEBAND: 307 status = cx231xx_afe_setup_AFE_for_baseband(dev); 308 break; 309 case AFE_MODE_EU_HI_IF: 310 /* SetupAFEforEuHiIF(); */ 311 break; 312 case AFE_MODE_US_HI_IF: 313 /* SetupAFEforUsHiIF(); */ 314 break; 315 case AFE_MODE_JAPAN_HI_IF: 316 /* SetupAFEforJapanHiIF(); */ 317 break; 318 } 319 320 if ((mode != dev->afe_mode) && 321 (dev->video_input == CX231XX_VMUX_TELEVISION)) 322 status = cx231xx_afe_adjust_ref_count(dev, 323 CX231XX_VMUX_TELEVISION); 324 325 dev->afe_mode = mode; 326 327 return status; 328 } 329 330 int cx231xx_afe_update_power_control(struct cx231xx *dev, 331 enum AV_MODE avmode) 332 { 333 u8 afe_power_status = 0; 334 int status = 0; 335 336 switch (dev->model) { 337 case CX231XX_BOARD_CNXT_CARRAERA: 338 case CX231XX_BOARD_CNXT_RDE_250: 339 case CX231XX_BOARD_CNXT_SHELBY: 340 case CX231XX_BOARD_CNXT_RDU_250: 341 case CX231XX_BOARD_CNXT_RDE_253S: 342 case CX231XX_BOARD_CNXT_RDU_253S: 343 case CX231XX_BOARD_CNXT_VIDEO_GRABBER: 344 case CX231XX_BOARD_HAUPPAUGE_EXETER: 345 case CX231XX_BOARD_HAUPPAUGE_930C_HD_1113xx: 346 case CX231XX_BOARD_HAUPPAUGE_USBLIVE2: 347 case CX231XX_BOARD_PV_PLAYTV_USB_HYBRID: 348 case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL: 349 case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC: 350 case CX231XX_BOARD_OTG102: 351 if (avmode == POLARIS_AVMODE_ANALOGT_TV) { 352 while (afe_power_status != (FLD_PWRDN_TUNING_BIAS | 353 FLD_PWRDN_ENABLE_PLL)) { 354 status = afe_write_byte(dev, SUP_BLK_PWRDN, 355 FLD_PWRDN_TUNING_BIAS | 356 FLD_PWRDN_ENABLE_PLL); 357 status |= afe_read_byte(dev, SUP_BLK_PWRDN, 358 &afe_power_status); 359 if (status < 0) 360 break; 361 } 362 363 status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1, 364 0x00); 365 status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2, 366 0x00); 367 status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3, 368 0x00); 369 } else if (avmode == POLARIS_AVMODE_DIGITAL) { 370 status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1, 371 0x70); 372 status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2, 373 0x70); 374 status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3, 375 0x70); 376 377 status |= afe_read_byte(dev, SUP_BLK_PWRDN, 378 &afe_power_status); 379 afe_power_status |= FLD_PWRDN_PD_BANDGAP | 380 FLD_PWRDN_PD_BIAS | 381 FLD_PWRDN_PD_TUNECK; 382 status |= afe_write_byte(dev, SUP_BLK_PWRDN, 383 afe_power_status); 384 } else if (avmode == POLARIS_AVMODE_ENXTERNAL_AV) { 385 while (afe_power_status != (FLD_PWRDN_TUNING_BIAS | 386 FLD_PWRDN_ENABLE_PLL)) { 387 status = afe_write_byte(dev, SUP_BLK_PWRDN, 388 FLD_PWRDN_TUNING_BIAS | 389 FLD_PWRDN_ENABLE_PLL); 390 status |= afe_read_byte(dev, SUP_BLK_PWRDN, 391 &afe_power_status); 392 if (status < 0) 393 break; 394 } 395 396 status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1, 397 0x00); 398 status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2, 399 0x00); 400 status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3, 401 0x00); 402 } else { 403 dev_dbg(dev->dev, "Invalid AV mode input\n"); 404 status = -1; 405 } 406 break; 407 default: 408 if (avmode == POLARIS_AVMODE_ANALOGT_TV) { 409 while (afe_power_status != (FLD_PWRDN_TUNING_BIAS | 410 FLD_PWRDN_ENABLE_PLL)) { 411 status = afe_write_byte(dev, SUP_BLK_PWRDN, 412 FLD_PWRDN_TUNING_BIAS | 413 FLD_PWRDN_ENABLE_PLL); 414 status |= afe_read_byte(dev, SUP_BLK_PWRDN, 415 &afe_power_status); 416 if (status < 0) 417 break; 418 } 419 420 status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1, 421 0x40); 422 status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2, 423 0x40); 424 status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3, 425 0x00); 426 } else if (avmode == POLARIS_AVMODE_DIGITAL) { 427 status = afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1, 428 0x70); 429 status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2, 430 0x70); 431 status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3, 432 0x70); 433 434 status |= afe_read_byte(dev, SUP_BLK_PWRDN, 435 &afe_power_status); 436 afe_power_status |= FLD_PWRDN_PD_BANDGAP | 437 FLD_PWRDN_PD_BIAS | 438 FLD_PWRDN_PD_TUNECK; 439 status |= afe_write_byte(dev, SUP_BLK_PWRDN, 440 afe_power_status); 441 } else if (avmode == POLARIS_AVMODE_ENXTERNAL_AV) { 442 while (afe_power_status != (FLD_PWRDN_TUNING_BIAS | 443 FLD_PWRDN_ENABLE_PLL)) { 444 status = afe_write_byte(dev, SUP_BLK_PWRDN, 445 FLD_PWRDN_TUNING_BIAS | 446 FLD_PWRDN_ENABLE_PLL); 447 status |= afe_read_byte(dev, SUP_BLK_PWRDN, 448 &afe_power_status); 449 if (status < 0) 450 break; 451 } 452 453 status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH1, 454 0x00); 455 status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH2, 456 0x00); 457 status |= afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3, 458 0x40); 459 } else { 460 dev_dbg(dev->dev, "Invalid AV mode input\n"); 461 status = -1; 462 } 463 } /* switch */ 464 465 return status; 466 } 467 468 int cx231xx_afe_adjust_ref_count(struct cx231xx *dev, u32 video_input) 469 { 470 u8 input_mode = 0; 471 u8 ntf_mode = 0; 472 int status = 0; 473 474 dev->video_input = video_input; 475 476 if (video_input == CX231XX_VMUX_TELEVISION) { 477 status = afe_read_byte(dev, ADC_INPUT_CH3, &input_mode); 478 status = afe_read_byte(dev, ADC_NTF_PRECLMP_EN_CH3, 479 &ntf_mode); 480 } else { 481 status = afe_read_byte(dev, ADC_INPUT_CH1, &input_mode); 482 status = afe_read_byte(dev, ADC_NTF_PRECLMP_EN_CH1, 483 &ntf_mode); 484 } 485 486 input_mode = (ntf_mode & 0x3) | ((input_mode & 0x6) << 1); 487 488 switch (input_mode) { 489 case SINGLE_ENDED: 490 dev->afe_ref_count = 0x23C; 491 break; 492 case LOW_IF: 493 dev->afe_ref_count = 0x24C; 494 break; 495 case EU_IF: 496 dev->afe_ref_count = 0x258; 497 break; 498 case US_IF: 499 dev->afe_ref_count = 0x260; 500 break; 501 default: 502 break; 503 } 504 505 status = cx231xx_afe_init_super_block(dev, dev->afe_ref_count); 506 507 return status; 508 } 509 510 /****************************************************************************** 511 * V I D E O / A U D I O D E C O D E R C O N T R O L functions * 512 ******************************************************************************/ 513 static int vid_blk_write_byte(struct cx231xx *dev, u16 saddr, u8 data) 514 { 515 return cx231xx_write_i2c_data(dev, VID_BLK_I2C_ADDRESS, 516 saddr, 2, data, 1); 517 } 518 519 static int vid_blk_read_byte(struct cx231xx *dev, u16 saddr, u8 *data) 520 { 521 int status; 522 u32 temp = 0; 523 524 status = cx231xx_read_i2c_data(dev, VID_BLK_I2C_ADDRESS, 525 saddr, 2, &temp, 1); 526 *data = (u8) temp; 527 return status; 528 } 529 530 static int vid_blk_write_word(struct cx231xx *dev, u16 saddr, u32 data) 531 { 532 return cx231xx_write_i2c_data(dev, VID_BLK_I2C_ADDRESS, 533 saddr, 2, data, 4); 534 } 535 536 static int vid_blk_read_word(struct cx231xx *dev, u16 saddr, u32 *data) 537 { 538 return cx231xx_read_i2c_data(dev, VID_BLK_I2C_ADDRESS, 539 saddr, 2, data, 4); 540 } 541 int cx231xx_check_fw(struct cx231xx *dev) 542 { 543 u8 temp = 0; 544 int status = 0; 545 status = vid_blk_read_byte(dev, DL_CTL_ADDRESS_LOW, &temp); 546 if (status < 0) 547 return status; 548 else 549 return temp; 550 551 } 552 553 int cx231xx_set_video_input_mux(struct cx231xx *dev, u8 input) 554 { 555 int status = 0; 556 557 switch (INPUT(input)->type) { 558 case CX231XX_VMUX_COMPOSITE1: 559 case CX231XX_VMUX_SVIDEO: 560 if ((dev->current_pcb_config.type == USB_BUS_POWER) && 561 (dev->power_mode != POLARIS_AVMODE_ENXTERNAL_AV)) { 562 /* External AV */ 563 status = cx231xx_set_power_mode(dev, 564 POLARIS_AVMODE_ENXTERNAL_AV); 565 if (status < 0) { 566 dev_err(dev->dev, 567 "%s: Failed to set Power - errCode [%d]!\n", 568 __func__, status); 569 return status; 570 } 571 } 572 status = cx231xx_set_decoder_video_input(dev, 573 INPUT(input)->type, 574 INPUT(input)->vmux); 575 break; 576 case CX231XX_VMUX_TELEVISION: 577 case CX231XX_VMUX_CABLE: 578 if ((dev->current_pcb_config.type == USB_BUS_POWER) && 579 (dev->power_mode != POLARIS_AVMODE_ANALOGT_TV)) { 580 /* Tuner */ 581 status = cx231xx_set_power_mode(dev, 582 POLARIS_AVMODE_ANALOGT_TV); 583 if (status < 0) { 584 dev_err(dev->dev, 585 "%s: Failed to set Power - errCode [%d]!\n", 586 __func__, status); 587 return status; 588 } 589 } 590 if (dev->tuner_type == TUNER_NXP_TDA18271) 591 status = cx231xx_set_decoder_video_input(dev, 592 CX231XX_VMUX_TELEVISION, 593 INPUT(input)->vmux); 594 else 595 status = cx231xx_set_decoder_video_input(dev, 596 CX231XX_VMUX_COMPOSITE1, 597 INPUT(input)->vmux); 598 599 break; 600 default: 601 dev_err(dev->dev, "%s: Unknown Input %d !\n", 602 __func__, INPUT(input)->type); 603 break; 604 } 605 606 /* save the selection */ 607 dev->video_input = input; 608 609 return status; 610 } 611 612 int cx231xx_set_decoder_video_input(struct cx231xx *dev, 613 u8 pin_type, u8 input) 614 { 615 int status = 0; 616 u32 value = 0; 617 618 if (pin_type != dev->video_input) { 619 status = cx231xx_afe_adjust_ref_count(dev, pin_type); 620 if (status < 0) { 621 dev_err(dev->dev, 622 "%s: adjust_ref_count :Failed to set AFE input mux - errCode [%d]!\n", 623 __func__, status); 624 return status; 625 } 626 } 627 628 /* call afe block to set video inputs */ 629 status = cx231xx_afe_set_input_mux(dev, input); 630 if (status < 0) { 631 dev_err(dev->dev, 632 "%s: set_input_mux :Failed to set AFE input mux - errCode [%d]!\n", 633 __func__, status); 634 return status; 635 } 636 637 switch (pin_type) { 638 case CX231XX_VMUX_COMPOSITE1: 639 status = vid_blk_read_word(dev, AFE_CTRL, &value); 640 value |= (0 << 13) | (1 << 4); 641 value &= ~(1 << 5); 642 643 /* set [24:23] [22:15] to 0 */ 644 value &= (~(0x1ff8000)); 645 /* set FUNC_MODE[24:23] = 2 IF_MOD[22:15] = 0 */ 646 value |= 0x1000000; 647 status = vid_blk_write_word(dev, AFE_CTRL, value); 648 649 status = vid_blk_read_word(dev, OUT_CTRL1, &value); 650 value |= (1 << 7); 651 status = vid_blk_write_word(dev, OUT_CTRL1, value); 652 653 /* Set output mode */ 654 status = cx231xx_read_modify_write_i2c_dword(dev, 655 VID_BLK_I2C_ADDRESS, 656 OUT_CTRL1, 657 FLD_OUT_MODE, 658 dev->board.output_mode); 659 660 /* Tell DIF object to go to baseband mode */ 661 status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND); 662 if (status < 0) { 663 dev_err(dev->dev, 664 "%s: cx231xx_dif set to By pass mode- errCode [%d]!\n", 665 __func__, status); 666 return status; 667 } 668 669 /* Read the DFE_CTRL1 register */ 670 status = vid_blk_read_word(dev, DFE_CTRL1, &value); 671 672 /* enable the VBI_GATE_EN */ 673 value |= FLD_VBI_GATE_EN; 674 675 /* Enable the auto-VGA enable */ 676 value |= FLD_VGA_AUTO_EN; 677 678 /* Write it back */ 679 status = vid_blk_write_word(dev, DFE_CTRL1, value); 680 681 /* Disable auto config of registers */ 682 status = cx231xx_read_modify_write_i2c_dword(dev, 683 VID_BLK_I2C_ADDRESS, 684 MODE_CTRL, FLD_ACFG_DIS, 685 cx231xx_set_field(FLD_ACFG_DIS, 1)); 686 687 /* Set CVBS input mode */ 688 status = cx231xx_read_modify_write_i2c_dword(dev, 689 VID_BLK_I2C_ADDRESS, 690 MODE_CTRL, FLD_INPUT_MODE, 691 cx231xx_set_field(FLD_INPUT_MODE, INPUT_MODE_CVBS_0)); 692 break; 693 case CX231XX_VMUX_SVIDEO: 694 /* Disable the use of DIF */ 695 696 status = vid_blk_read_word(dev, AFE_CTRL, &value); 697 698 /* set [24:23] [22:15] to 0 */ 699 value &= (~(0x1ff8000)); 700 /* set FUNC_MODE[24:23] = 2 701 IF_MOD[22:15] = 0 DCR_BYP_CH2[4:4] = 1; */ 702 value |= 0x1000010; 703 status = vid_blk_write_word(dev, AFE_CTRL, value); 704 705 /* Tell DIF object to go to baseband mode */ 706 status = cx231xx_dif_set_standard(dev, DIF_USE_BASEBAND); 707 if (status < 0) { 708 dev_err(dev->dev, 709 "%s: cx231xx_dif set to By pass mode- errCode [%d]!\n", 710 __func__, status); 711 return status; 712 } 713 714 /* Read the DFE_CTRL1 register */ 715 status = vid_blk_read_word(dev, DFE_CTRL1, &value); 716 717 /* enable the VBI_GATE_EN */ 718 value |= FLD_VBI_GATE_EN; 719 720 /* Enable the auto-VGA enable */ 721 value |= FLD_VGA_AUTO_EN; 722 723 /* Write it back */ 724 status = vid_blk_write_word(dev, DFE_CTRL1, value); 725 726 /* Disable auto config of registers */ 727 status = cx231xx_read_modify_write_i2c_dword(dev, 728 VID_BLK_I2C_ADDRESS, 729 MODE_CTRL, FLD_ACFG_DIS, 730 cx231xx_set_field(FLD_ACFG_DIS, 1)); 731 732 /* Set YC input mode */ 733 status = cx231xx_read_modify_write_i2c_dword(dev, 734 VID_BLK_I2C_ADDRESS, 735 MODE_CTRL, 736 FLD_INPUT_MODE, 737 cx231xx_set_field(FLD_INPUT_MODE, INPUT_MODE_YC_1)); 738 739 /* Chroma to ADC2 */ 740 status = vid_blk_read_word(dev, AFE_CTRL, &value); 741 value |= FLD_CHROMA_IN_SEL; /* set the chroma in select */ 742 743 /* Clear VGA_SEL_CH2 and VGA_SEL_CH3 (bits 7 and 8) 744 This sets them to use video 745 rather than audio. Only one of the two will be in use. */ 746 value &= ~(FLD_VGA_SEL_CH2 | FLD_VGA_SEL_CH3); 747 748 status = vid_blk_write_word(dev, AFE_CTRL, value); 749 750 status = cx231xx_afe_set_mode(dev, AFE_MODE_BASEBAND); 751 break; 752 case CX231XX_VMUX_TELEVISION: 753 case CX231XX_VMUX_CABLE: 754 default: 755 /* TODO: Test if this is also needed for xc2028/xc3028 */ 756 if (dev->board.tuner_type == TUNER_XC5000) { 757 /* Disable the use of DIF */ 758 759 status = vid_blk_read_word(dev, AFE_CTRL, &value); 760 value |= (0 << 13) | (1 << 4); 761 value &= ~(1 << 5); 762 763 /* set [24:23] [22:15] to 0 */ 764 value &= (~(0x1FF8000)); 765 /* set FUNC_MODE[24:23] = 2 IF_MOD[22:15] = 0 */ 766 value |= 0x1000000; 767 status = vid_blk_write_word(dev, AFE_CTRL, value); 768 769 status = vid_blk_read_word(dev, OUT_CTRL1, &value); 770 value |= (1 << 7); 771 status = vid_blk_write_word(dev, OUT_CTRL1, value); 772 773 /* Set output mode */ 774 status = cx231xx_read_modify_write_i2c_dword(dev, 775 VID_BLK_I2C_ADDRESS, 776 OUT_CTRL1, FLD_OUT_MODE, 777 dev->board.output_mode); 778 779 /* Tell DIF object to go to baseband mode */ 780 status = cx231xx_dif_set_standard(dev, 781 DIF_USE_BASEBAND); 782 if (status < 0) { 783 dev_err(dev->dev, 784 "%s: cx231xx_dif set to By pass mode- errCode [%d]!\n", 785 __func__, status); 786 return status; 787 } 788 789 /* Read the DFE_CTRL1 register */ 790 status = vid_blk_read_word(dev, DFE_CTRL1, &value); 791 792 /* enable the VBI_GATE_EN */ 793 value |= FLD_VBI_GATE_EN; 794 795 /* Enable the auto-VGA enable */ 796 value |= FLD_VGA_AUTO_EN; 797 798 /* Write it back */ 799 status = vid_blk_write_word(dev, DFE_CTRL1, value); 800 801 /* Disable auto config of registers */ 802 status = cx231xx_read_modify_write_i2c_dword(dev, 803 VID_BLK_I2C_ADDRESS, 804 MODE_CTRL, FLD_ACFG_DIS, 805 cx231xx_set_field(FLD_ACFG_DIS, 1)); 806 807 /* Set CVBS input mode */ 808 status = cx231xx_read_modify_write_i2c_dword(dev, 809 VID_BLK_I2C_ADDRESS, 810 MODE_CTRL, FLD_INPUT_MODE, 811 cx231xx_set_field(FLD_INPUT_MODE, 812 INPUT_MODE_CVBS_0)); 813 } else { 814 /* Enable the DIF for the tuner */ 815 816 /* Reinitialize the DIF */ 817 status = cx231xx_dif_set_standard(dev, dev->norm); 818 if (status < 0) { 819 dev_err(dev->dev, 820 "%s: cx231xx_dif set to By pass mode- errCode [%d]!\n", 821 __func__, status); 822 return status; 823 } 824 825 /* Make sure bypass is cleared */ 826 status = vid_blk_read_word(dev, DIF_MISC_CTRL, &value); 827 828 /* Clear the bypass bit */ 829 value &= ~FLD_DIF_DIF_BYPASS; 830 831 /* Enable the use of the DIF block */ 832 status = vid_blk_write_word(dev, DIF_MISC_CTRL, value); 833 834 /* Read the DFE_CTRL1 register */ 835 status = vid_blk_read_word(dev, DFE_CTRL1, &value); 836 837 /* Disable the VBI_GATE_EN */ 838 value &= ~FLD_VBI_GATE_EN; 839 840 /* Enable the auto-VGA enable, AGC, and 841 set the skip count to 2 */ 842 value |= FLD_VGA_AUTO_EN | FLD_AGC_AUTO_EN | 0x00200000; 843 844 /* Write it back */ 845 status = vid_blk_write_word(dev, DFE_CTRL1, value); 846 847 /* Wait until AGC locks up */ 848 msleep(1); 849 850 /* Disable the auto-VGA enable AGC */ 851 value &= ~(FLD_VGA_AUTO_EN); 852 853 /* Write it back */ 854 status = vid_blk_write_word(dev, DFE_CTRL1, value); 855 856 /* Enable Polaris B0 AGC output */ 857 status = vid_blk_read_word(dev, PIN_CTRL, &value); 858 value |= (FLD_OEF_AGC_RF) | 859 (FLD_OEF_AGC_IFVGA) | 860 (FLD_OEF_AGC_IF); 861 status = vid_blk_write_word(dev, PIN_CTRL, value); 862 863 /* Set output mode */ 864 status = cx231xx_read_modify_write_i2c_dword(dev, 865 VID_BLK_I2C_ADDRESS, 866 OUT_CTRL1, FLD_OUT_MODE, 867 dev->board.output_mode); 868 869 /* Disable auto config of registers */ 870 status = cx231xx_read_modify_write_i2c_dword(dev, 871 VID_BLK_I2C_ADDRESS, 872 MODE_CTRL, FLD_ACFG_DIS, 873 cx231xx_set_field(FLD_ACFG_DIS, 1)); 874 875 /* Set CVBS input mode */ 876 status = cx231xx_read_modify_write_i2c_dword(dev, 877 VID_BLK_I2C_ADDRESS, 878 MODE_CTRL, FLD_INPUT_MODE, 879 cx231xx_set_field(FLD_INPUT_MODE, 880 INPUT_MODE_CVBS_0)); 881 882 /* Set some bits in AFE_CTRL so that channel 2 or 3 883 * is ready to receive audio */ 884 /* Clear clamp for channels 2 and 3 (bit 16-17) */ 885 /* Clear droop comp (bit 19-20) */ 886 /* Set VGA_SEL (for audio control) (bit 7-8) */ 887 status = vid_blk_read_word(dev, AFE_CTRL, &value); 888 889 /*Set Func mode:01-DIF 10-baseband 11-YUV*/ 890 value &= (~(FLD_FUNC_MODE)); 891 value |= 0x800000; 892 893 value |= FLD_VGA_SEL_CH3 | FLD_VGA_SEL_CH2; 894 895 status = vid_blk_write_word(dev, AFE_CTRL, value); 896 897 if (dev->tuner_type == TUNER_NXP_TDA18271) { 898 status = vid_blk_read_word(dev, PIN_CTRL, 899 &value); 900 status = vid_blk_write_word(dev, PIN_CTRL, 901 (value & 0xFFFFFFEF)); 902 } 903 904 break; 905 906 } 907 break; 908 } 909 910 /* Set raw VBI mode */ 911 status = cx231xx_read_modify_write_i2c_dword(dev, 912 VID_BLK_I2C_ADDRESS, 913 OUT_CTRL1, FLD_VBIHACTRAW_EN, 914 cx231xx_set_field(FLD_VBIHACTRAW_EN, 1)); 915 916 status = vid_blk_read_word(dev, OUT_CTRL1, &value); 917 if (value & 0x02) { 918 value |= (1 << 19); 919 status = vid_blk_write_word(dev, OUT_CTRL1, value); 920 } 921 922 return status; 923 } 924 925 void cx231xx_enable656(struct cx231xx *dev) 926 { 927 u8 temp = 0; 928 /*enable TS1 data[0:7] as output to export 656*/ 929 930 vid_blk_write_byte(dev, TS1_PIN_CTL0, 0xFF); 931 932 /*enable TS1 clock as output to export 656*/ 933 934 vid_blk_read_byte(dev, TS1_PIN_CTL1, &temp); 935 temp = temp|0x04; 936 937 vid_blk_write_byte(dev, TS1_PIN_CTL1, temp); 938 } 939 EXPORT_SYMBOL_GPL(cx231xx_enable656); 940 941 void cx231xx_disable656(struct cx231xx *dev) 942 { 943 u8 temp = 0; 944 945 vid_blk_write_byte(dev, TS1_PIN_CTL0, 0x00); 946 947 vid_blk_read_byte(dev, TS1_PIN_CTL1, &temp); 948 temp = temp&0xFB; 949 950 vid_blk_write_byte(dev, TS1_PIN_CTL1, temp); 951 } 952 EXPORT_SYMBOL_GPL(cx231xx_disable656); 953 954 /* 955 * Handle any video-mode specific overrides that are different 956 * on a per video standards basis after touching the MODE_CTRL 957 * register which resets many values for autodetect 958 */ 959 int cx231xx_do_mode_ctrl_overrides(struct cx231xx *dev) 960 { 961 int status = 0; 962 963 dev_dbg(dev->dev, "%s: 0x%x\n", 964 __func__, (unsigned int)dev->norm); 965 966 /* Change the DFE_CTRL3 bp_percent to fix flagging */ 967 status = vid_blk_write_word(dev, DFE_CTRL3, 0xCD3F0280); 968 969 if (dev->norm & (V4L2_STD_NTSC | V4L2_STD_PAL_M)) { 970 dev_dbg(dev->dev, "%s: NTSC\n", __func__); 971 972 /* Move the close caption lines out of active video, 973 adjust the active video start point */ 974 status = cx231xx_read_modify_write_i2c_dword(dev, 975 VID_BLK_I2C_ADDRESS, 976 VERT_TIM_CTRL, 977 FLD_VBLANK_CNT, 0x18); 978 status = cx231xx_read_modify_write_i2c_dword(dev, 979 VID_BLK_I2C_ADDRESS, 980 VERT_TIM_CTRL, 981 FLD_VACTIVE_CNT, 982 0x1E7000); 983 status = cx231xx_read_modify_write_i2c_dword(dev, 984 VID_BLK_I2C_ADDRESS, 985 VERT_TIM_CTRL, 986 FLD_V656BLANK_CNT, 987 0x1C000000); 988 989 status = cx231xx_read_modify_write_i2c_dword(dev, 990 VID_BLK_I2C_ADDRESS, 991 HORIZ_TIM_CTRL, 992 FLD_HBLANK_CNT, 993 cx231xx_set_field 994 (FLD_HBLANK_CNT, 0x79)); 995 996 } else if (dev->norm & V4L2_STD_SECAM) { 997 dev_dbg(dev->dev, "%s: SECAM\n", __func__); 998 status = cx231xx_read_modify_write_i2c_dword(dev, 999 VID_BLK_I2C_ADDRESS, 1000 VERT_TIM_CTRL, 1001 FLD_VBLANK_CNT, 0x20); 1002 status = cx231xx_read_modify_write_i2c_dword(dev, 1003 VID_BLK_I2C_ADDRESS, 1004 VERT_TIM_CTRL, 1005 FLD_VACTIVE_CNT, 1006 cx231xx_set_field 1007 (FLD_VACTIVE_CNT, 1008 0x244)); 1009 status = cx231xx_read_modify_write_i2c_dword(dev, 1010 VID_BLK_I2C_ADDRESS, 1011 VERT_TIM_CTRL, 1012 FLD_V656BLANK_CNT, 1013 cx231xx_set_field 1014 (FLD_V656BLANK_CNT, 1015 0x24)); 1016 /* Adjust the active video horizontal start point */ 1017 status = cx231xx_read_modify_write_i2c_dword(dev, 1018 VID_BLK_I2C_ADDRESS, 1019 HORIZ_TIM_CTRL, 1020 FLD_HBLANK_CNT, 1021 cx231xx_set_field 1022 (FLD_HBLANK_CNT, 0x85)); 1023 } else { 1024 dev_dbg(dev->dev, "%s: PAL\n", __func__); 1025 status = cx231xx_read_modify_write_i2c_dword(dev, 1026 VID_BLK_I2C_ADDRESS, 1027 VERT_TIM_CTRL, 1028 FLD_VBLANK_CNT, 0x20); 1029 status = cx231xx_read_modify_write_i2c_dword(dev, 1030 VID_BLK_I2C_ADDRESS, 1031 VERT_TIM_CTRL, 1032 FLD_VACTIVE_CNT, 1033 cx231xx_set_field 1034 (FLD_VACTIVE_CNT, 1035 0x244)); 1036 status = cx231xx_read_modify_write_i2c_dword(dev, 1037 VID_BLK_I2C_ADDRESS, 1038 VERT_TIM_CTRL, 1039 FLD_V656BLANK_CNT, 1040 cx231xx_set_field 1041 (FLD_V656BLANK_CNT, 1042 0x24)); 1043 /* Adjust the active video horizontal start point */ 1044 status = cx231xx_read_modify_write_i2c_dword(dev, 1045 VID_BLK_I2C_ADDRESS, 1046 HORIZ_TIM_CTRL, 1047 FLD_HBLANK_CNT, 1048 cx231xx_set_field 1049 (FLD_HBLANK_CNT, 0x85)); 1050 1051 } 1052 1053 return status; 1054 } 1055 1056 int cx231xx_unmute_audio(struct cx231xx *dev) 1057 { 1058 return vid_blk_write_byte(dev, PATH1_VOL_CTL, 0x24); 1059 } 1060 EXPORT_SYMBOL_GPL(cx231xx_unmute_audio); 1061 1062 static int stopAudioFirmware(struct cx231xx *dev) 1063 { 1064 return vid_blk_write_byte(dev, DL_CTL_CONTROL, 0x03); 1065 } 1066 1067 static int restartAudioFirmware(struct cx231xx *dev) 1068 { 1069 return vid_blk_write_byte(dev, DL_CTL_CONTROL, 0x13); 1070 } 1071 1072 int cx231xx_set_audio_input(struct cx231xx *dev, u8 input) 1073 { 1074 int status = 0; 1075 enum AUDIO_INPUT ainput = AUDIO_INPUT_LINE; 1076 1077 switch (INPUT(input)->amux) { 1078 case CX231XX_AMUX_VIDEO: 1079 ainput = AUDIO_INPUT_TUNER_TV; 1080 break; 1081 case CX231XX_AMUX_LINE_IN: 1082 status = cx231xx_i2s_blk_set_audio_input(dev, input); 1083 ainput = AUDIO_INPUT_LINE; 1084 break; 1085 default: 1086 break; 1087 } 1088 1089 status = cx231xx_set_audio_decoder_input(dev, ainput); 1090 1091 return status; 1092 } 1093 1094 int cx231xx_set_audio_decoder_input(struct cx231xx *dev, 1095 enum AUDIO_INPUT audio_input) 1096 { 1097 u32 dwval; 1098 int status; 1099 u8 gen_ctrl; 1100 u32 value = 0; 1101 1102 /* Put it in soft reset */ 1103 status = vid_blk_read_byte(dev, GENERAL_CTL, &gen_ctrl); 1104 gen_ctrl |= 1; 1105 status = vid_blk_write_byte(dev, GENERAL_CTL, gen_ctrl); 1106 1107 switch (audio_input) { 1108 case AUDIO_INPUT_LINE: 1109 /* setup AUD_IO control from Merlin paralle output */ 1110 value = cx231xx_set_field(FLD_AUD_CHAN1_SRC, 1111 AUD_CHAN_SRC_PARALLEL); 1112 status = vid_blk_write_word(dev, AUD_IO_CTRL, value); 1113 1114 /* setup input to Merlin, SRC2 connect to AC97 1115 bypass upsample-by-2, slave mode, sony mode, left justify 1116 adr 091c, dat 01000000 */ 1117 status = vid_blk_read_word(dev, AC97_CTL, &dwval); 1118 1119 status = vid_blk_write_word(dev, AC97_CTL, 1120 (dwval | FLD_AC97_UP2X_BYPASS)); 1121 1122 /* select the parallel1 and SRC3 */ 1123 status = vid_blk_write_word(dev, BAND_OUT_SEL, 1124 cx231xx_set_field(FLD_SRC3_IN_SEL, 0x0) | 1125 cx231xx_set_field(FLD_SRC3_CLK_SEL, 0x0) | 1126 cx231xx_set_field(FLD_PARALLEL1_SRC_SEL, 0x0)); 1127 1128 /* unmute all, AC97 in, independence mode 1129 adr 08d0, data 0x00063073 */ 1130 status = vid_blk_write_word(dev, DL_CTL, 0x3000001); 1131 status = vid_blk_write_word(dev, PATH1_CTL1, 0x00063073); 1132 1133 /* set AVC maximum threshold, adr 08d4, dat ffff0024 */ 1134 status = vid_blk_read_word(dev, PATH1_VOL_CTL, &dwval); 1135 status = vid_blk_write_word(dev, PATH1_VOL_CTL, 1136 (dwval | FLD_PATH1_AVC_THRESHOLD)); 1137 1138 /* set SC maximum threshold, adr 08ec, dat ffffb3a3 */ 1139 status = vid_blk_read_word(dev, PATH1_SC_CTL, &dwval); 1140 status = vid_blk_write_word(dev, PATH1_SC_CTL, 1141 (dwval | FLD_PATH1_SC_THRESHOLD)); 1142 break; 1143 1144 case AUDIO_INPUT_TUNER_TV: 1145 default: 1146 status = stopAudioFirmware(dev); 1147 /* Setup SRC sources and clocks */ 1148 status = vid_blk_write_word(dev, BAND_OUT_SEL, 1149 cx231xx_set_field(FLD_SRC6_IN_SEL, 0x00) | 1150 cx231xx_set_field(FLD_SRC6_CLK_SEL, 0x01) | 1151 cx231xx_set_field(FLD_SRC5_IN_SEL, 0x00) | 1152 cx231xx_set_field(FLD_SRC5_CLK_SEL, 0x02) | 1153 cx231xx_set_field(FLD_SRC4_IN_SEL, 0x02) | 1154 cx231xx_set_field(FLD_SRC4_CLK_SEL, 0x03) | 1155 cx231xx_set_field(FLD_SRC3_IN_SEL, 0x00) | 1156 cx231xx_set_field(FLD_SRC3_CLK_SEL, 0x00) | 1157 cx231xx_set_field(FLD_BASEBAND_BYPASS_CTL, 0x00) | 1158 cx231xx_set_field(FLD_AC97_SRC_SEL, 0x03) | 1159 cx231xx_set_field(FLD_I2S_SRC_SEL, 0x00) | 1160 cx231xx_set_field(FLD_PARALLEL2_SRC_SEL, 0x02) | 1161 cx231xx_set_field(FLD_PARALLEL1_SRC_SEL, 0x01)); 1162 1163 /* Setup the AUD_IO control */ 1164 status = vid_blk_write_word(dev, AUD_IO_CTRL, 1165 cx231xx_set_field(FLD_I2S_PORT_DIR, 0x00) | 1166 cx231xx_set_field(FLD_I2S_OUT_SRC, 0x00) | 1167 cx231xx_set_field(FLD_AUD_CHAN3_SRC, 0x00) | 1168 cx231xx_set_field(FLD_AUD_CHAN2_SRC, 0x00) | 1169 cx231xx_set_field(FLD_AUD_CHAN1_SRC, 0x03)); 1170 1171 status = vid_blk_write_word(dev, PATH1_CTL1, 0x1F063870); 1172 1173 /* setAudioStandard(_audio_standard); */ 1174 status = vid_blk_write_word(dev, PATH1_CTL1, 0x00063870); 1175 1176 status = restartAudioFirmware(dev); 1177 1178 switch (dev->board.tuner_type) { 1179 case TUNER_XC5000: 1180 /* SIF passthrough at 28.6363 MHz sample rate */ 1181 status = cx231xx_read_modify_write_i2c_dword(dev, 1182 VID_BLK_I2C_ADDRESS, 1183 CHIP_CTRL, 1184 FLD_SIF_EN, 1185 cx231xx_set_field(FLD_SIF_EN, 1)); 1186 break; 1187 case TUNER_NXP_TDA18271: 1188 /* Normal mode: SIF passthrough at 14.32 MHz */ 1189 status = cx231xx_read_modify_write_i2c_dword(dev, 1190 VID_BLK_I2C_ADDRESS, 1191 CHIP_CTRL, 1192 FLD_SIF_EN, 1193 cx231xx_set_field(FLD_SIF_EN, 0)); 1194 break; 1195 default: 1196 /* This is just a casual suggestion to people adding 1197 new boards in case they use a tuner type we don't 1198 currently know about */ 1199 dev_info(dev->dev, 1200 "Unknown tuner type configuring SIF"); 1201 break; 1202 } 1203 break; 1204 1205 case AUDIO_INPUT_TUNER_FM: 1206 /* use SIF for FM radio 1207 setupFM(); 1208 setAudioStandard(_audio_standard); 1209 */ 1210 break; 1211 1212 case AUDIO_INPUT_MUTE: 1213 status = vid_blk_write_word(dev, PATH1_CTL1, 0x1F011012); 1214 break; 1215 } 1216 1217 /* Take it out of soft reset */ 1218 status = vid_blk_read_byte(dev, GENERAL_CTL, &gen_ctrl); 1219 gen_ctrl &= ~1; 1220 status = vid_blk_write_byte(dev, GENERAL_CTL, gen_ctrl); 1221 1222 return status; 1223 } 1224 1225 /****************************************************************************** 1226 * C H I P Specific C O N T R O L functions * 1227 ******************************************************************************/ 1228 int cx231xx_init_ctrl_pin_status(struct cx231xx *dev) 1229 { 1230 u32 value; 1231 int status = 0; 1232 1233 status = vid_blk_read_word(dev, PIN_CTRL, &value); 1234 value |= (~dev->board.ctl_pin_status_mask); 1235 status = vid_blk_write_word(dev, PIN_CTRL, value); 1236 1237 return status; 1238 } 1239 1240 int cx231xx_set_agc_analog_digital_mux_select(struct cx231xx *dev, 1241 u8 analog_or_digital) 1242 { 1243 int status = 0; 1244 1245 /* first set the direction to output */ 1246 status = cx231xx_set_gpio_direction(dev, 1247 dev->board. 1248 agc_analog_digital_select_gpio, 1); 1249 1250 /* 0 - demod ; 1 - Analog mode */ 1251 status = cx231xx_set_gpio_value(dev, 1252 dev->board.agc_analog_digital_select_gpio, 1253 analog_or_digital); 1254 1255 if (status < 0) 1256 return status; 1257 1258 return 0; 1259 } 1260 1261 int cx231xx_enable_i2c_port_3(struct cx231xx *dev, bool is_port_3) 1262 { 1263 u8 value[4] = { 0, 0, 0, 0 }; 1264 int status = 0; 1265 bool current_is_port_3; 1266 1267 /* 1268 * Should this code check dev->port_3_switch_enabled first 1269 * to skip unnecessary reading of the register? 1270 * If yes, the flag dev->port_3_switch_enabled must be initialized 1271 * correctly. 1272 */ 1273 1274 status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, 1275 PWR_CTL_EN, value, 4); 1276 if (status < 0) 1277 return status; 1278 1279 current_is_port_3 = value[0] & I2C_DEMOD_EN ? true : false; 1280 1281 /* Just return, if already using the right port */ 1282 if (current_is_port_3 == is_port_3) 1283 return 0; 1284 1285 if (is_port_3) 1286 value[0] |= I2C_DEMOD_EN; 1287 else 1288 value[0] &= ~I2C_DEMOD_EN; 1289 1290 status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, 1291 PWR_CTL_EN, value, 4); 1292 1293 /* remember status of the switch for usage in is_tuner */ 1294 if (status >= 0) 1295 dev->port_3_switch_enabled = is_port_3; 1296 1297 return status; 1298 1299 } 1300 EXPORT_SYMBOL_GPL(cx231xx_enable_i2c_port_3); 1301 1302 void update_HH_register_after_set_DIF(struct cx231xx *dev) 1303 { 1304 /* 1305 u8 status = 0; 1306 u32 value = 0; 1307 1308 vid_blk_write_word(dev, PIN_CTRL, 0xA0FFF82F); 1309 vid_blk_write_word(dev, DIF_MISC_CTRL, 0x0A203F11); 1310 vid_blk_write_word(dev, DIF_SRC_PHASE_INC, 0x1BEFBF06); 1311 1312 status = vid_blk_read_word(dev, AFE_CTRL_C2HH_SRC_CTRL, &value); 1313 vid_blk_write_word(dev, AFE_CTRL_C2HH_SRC_CTRL, 0x4485D390); 1314 status = vid_blk_read_word(dev, AFE_CTRL_C2HH_SRC_CTRL, &value); 1315 */ 1316 } 1317 1318 void cx231xx_dump_HH_reg(struct cx231xx *dev) 1319 { 1320 u32 value = 0; 1321 u16 i = 0; 1322 1323 value = 0x45005390; 1324 vid_blk_write_word(dev, 0x104, value); 1325 1326 for (i = 0x100; i < 0x140; i++) { 1327 vid_blk_read_word(dev, i, &value); 1328 dev_dbg(dev->dev, "reg0x%x=0x%x\n", i, value); 1329 i = i+3; 1330 } 1331 1332 for (i = 0x300; i < 0x400; i++) { 1333 vid_blk_read_word(dev, i, &value); 1334 dev_dbg(dev->dev, "reg0x%x=0x%x\n", i, value); 1335 i = i+3; 1336 } 1337 1338 for (i = 0x400; i < 0x440; i++) { 1339 vid_blk_read_word(dev, i, &value); 1340 dev_dbg(dev->dev, "reg0x%x=0x%x\n", i, value); 1341 i = i+3; 1342 } 1343 1344 vid_blk_read_word(dev, AFE_CTRL_C2HH_SRC_CTRL, &value); 1345 dev_dbg(dev->dev, "AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value); 1346 vid_blk_write_word(dev, AFE_CTRL_C2HH_SRC_CTRL, 0x4485D390); 1347 vid_blk_read_word(dev, AFE_CTRL_C2HH_SRC_CTRL, &value); 1348 dev_dbg(dev->dev, "AFE_CTRL_C2HH_SRC_CTRL=0x%x\n", value); 1349 } 1350 1351 #if 0 1352 static void cx231xx_dump_SC_reg(struct cx231xx *dev) 1353 { 1354 u8 value[4] = { 0, 0, 0, 0 }; 1355 dev_dbg(dev->dev, "%s!\n", __func__); 1356 1357 cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, BOARD_CFG_STAT, 1358 value, 4); 1359 dev_dbg(dev->dev, 1360 "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", BOARD_CFG_STAT, value[0], 1361 value[1], value[2], value[3]); 1362 cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS_MODE_REG, 1363 value, 4); 1364 dev_dbg(dev->dev, 1365 "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS_MODE_REG, value[0], 1366 value[1], value[2], value[3]); 1367 cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS1_CFG_REG, 1368 value, 4); 1369 dev_dbg(dev->dev, 1370 "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_CFG_REG, value[0], 1371 value[1], value[2], value[3]); 1372 cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS1_LENGTH_REG, 1373 value, 4); 1374 dev_dbg(dev->dev, 1375 "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS1_LENGTH_REG, value[0], 1376 value[1], value[2], value[3]); 1377 1378 cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS2_CFG_REG, 1379 value, 4); 1380 dev_dbg(dev->dev, 1381 "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_CFG_REG, value[0], 1382 value[1], value[2], value[3]); 1383 cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, TS2_LENGTH_REG, 1384 value, 4); 1385 dev_dbg(dev->dev, 1386 "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", TS2_LENGTH_REG, value[0], 1387 value[1], value[2], value[3]); 1388 cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET, 1389 value, 4); 1390 dev_dbg(dev->dev, 1391 "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", EP_MODE_SET, value[0], 1392 value[1], value[2], value[3]); 1393 cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN1, 1394 value, 4); 1395 dev_dbg(dev->dev, 1396 "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN1, value[0], 1397 value[1], value[2], value[3]); 1398 1399 cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN2, 1400 value, 4); 1401 dev_dbg(dev->dev, 1402 "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN2, value[0], 1403 value[1], value[2], value[3]); 1404 cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_PTN3, 1405 value, 4); 1406 dev_dbg(dev->dev, 1407 "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_PTN3, value[0], 1408 value[1], value[2], value[3]); 1409 cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK0, 1410 value, 4); 1411 dev_dbg(dev->dev, 1412 "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK0, value[0], 1413 value[1], value[2], value[3]); 1414 cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK1, 1415 value, 4); 1416 dev_dbg(dev->dev, 1417 "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK1, value[0], 1418 value[1], value[2], value[3]); 1419 1420 cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_PWR_MASK2, 1421 value, 4); 1422 dev_dbg(dev->dev, 1423 "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_PWR_MASK2, value[0], 1424 value[1], value[2], value[3]); 1425 cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_GAIN, 1426 value, 4); 1427 dev_dbg(dev->dev, 1428 "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_GAIN, value[0], 1429 value[1], value[2], value[3]); 1430 cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_CAR_REG, 1431 value, 4); 1432 dev_dbg(dev->dev, 1433 "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_CAR_REG, value[0], 1434 value[1], value[2], value[3]); 1435 cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_OT_CFG1, 1436 value, 4); 1437 dev_dbg(dev->dev, 1438 "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG1, value[0], 1439 value[1], value[2], value[3]); 1440 1441 cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, CIR_OT_CFG2, 1442 value, 4); 1443 dev_dbg(dev->dev, 1444 "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", CIR_OT_CFG2, value[0], 1445 value[1], value[2], value[3]); 1446 cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN, 1447 value, 4); 1448 dev_dbg(dev->dev, 1449 "reg0x%x=0x%x 0x%x 0x%x 0x%x\n", PWR_CTL_EN, value[0], 1450 value[1], value[2], value[3]); 1451 } 1452 #endif 1453 1454 void cx231xx_Setup_AFE_for_LowIF(struct cx231xx *dev) 1455 1456 { 1457 u8 value = 0; 1458 1459 afe_read_byte(dev, ADC_STATUS2_CH3, &value); 1460 value = (value & 0xFE)|0x01; 1461 afe_write_byte(dev, ADC_STATUS2_CH3, value); 1462 1463 afe_read_byte(dev, ADC_STATUS2_CH3, &value); 1464 value = (value & 0xFE)|0x00; 1465 afe_write_byte(dev, ADC_STATUS2_CH3, value); 1466 1467 1468 /* 1469 config colibri to lo-if mode 1470 1471 FIXME: ntf_mode = 2'b00 by default. But set 0x1 would reduce 1472 the diff IF input by half, 1473 1474 for low-if agc defect 1475 */ 1476 1477 afe_read_byte(dev, ADC_NTF_PRECLMP_EN_CH3, &value); 1478 value = (value & 0xFC)|0x00; 1479 afe_write_byte(dev, ADC_NTF_PRECLMP_EN_CH3, value); 1480 1481 afe_read_byte(dev, ADC_INPUT_CH3, &value); 1482 value = (value & 0xF9)|0x02; 1483 afe_write_byte(dev, ADC_INPUT_CH3, value); 1484 1485 afe_read_byte(dev, ADC_FB_FRCRST_CH3, &value); 1486 value = (value & 0xFB)|0x04; 1487 afe_write_byte(dev, ADC_FB_FRCRST_CH3, value); 1488 1489 afe_read_byte(dev, ADC_DCSERVO_DEM_CH3, &value); 1490 value = (value & 0xFC)|0x03; 1491 afe_write_byte(dev, ADC_DCSERVO_DEM_CH3, value); 1492 1493 afe_read_byte(dev, ADC_CTRL_DAC1_CH3, &value); 1494 value = (value & 0xFB)|0x04; 1495 afe_write_byte(dev, ADC_CTRL_DAC1_CH3, value); 1496 1497 afe_read_byte(dev, ADC_CTRL_DAC23_CH3, &value); 1498 value = (value & 0xF8)|0x06; 1499 afe_write_byte(dev, ADC_CTRL_DAC23_CH3, value); 1500 1501 afe_read_byte(dev, ADC_CTRL_DAC23_CH3, &value); 1502 value = (value & 0x8F)|0x40; 1503 afe_write_byte(dev, ADC_CTRL_DAC23_CH3, value); 1504 1505 afe_read_byte(dev, ADC_PWRDN_CLAMP_CH3, &value); 1506 value = (value & 0xDF)|0x20; 1507 afe_write_byte(dev, ADC_PWRDN_CLAMP_CH3, value); 1508 } 1509 1510 void cx231xx_set_Colibri_For_LowIF(struct cx231xx *dev, u32 if_freq, 1511 u8 spectral_invert, u32 mode) 1512 { 1513 u32 colibri_carrier_offset = 0; 1514 u32 func_mode = 0x01; /* Device has a DIF if this function is called */ 1515 u32 standard = 0; 1516 u8 value[4] = { 0, 0, 0, 0 }; 1517 1518 dev_dbg(dev->dev, "Enter cx231xx_set_Colibri_For_LowIF()\n"); 1519 value[0] = (u8) 0x6F; 1520 value[1] = (u8) 0x6F; 1521 value[2] = (u8) 0x6F; 1522 value[3] = (u8) 0x6F; 1523 cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, 1524 PWR_CTL_EN, value, 4); 1525 1526 /*Set colibri for low IF*/ 1527 cx231xx_afe_set_mode(dev, AFE_MODE_LOW_IF); 1528 1529 /* Set C2HH for low IF operation.*/ 1530 standard = dev->norm; 1531 cx231xx_dif_configure_C2HH_for_low_IF(dev, dev->active_mode, 1532 func_mode, standard); 1533 1534 /* Get colibri offsets.*/ 1535 colibri_carrier_offset = cx231xx_Get_Colibri_CarrierOffset(mode, 1536 standard); 1537 1538 dev_dbg(dev->dev, "colibri_carrier_offset=%d, standard=0x%x\n", 1539 colibri_carrier_offset, standard); 1540 1541 /* Set the band Pass filter for DIF*/ 1542 cx231xx_set_DIF_bandpass(dev, (if_freq+colibri_carrier_offset), 1543 spectral_invert, mode); 1544 } 1545 1546 u32 cx231xx_Get_Colibri_CarrierOffset(u32 mode, u32 standerd) 1547 { 1548 u32 colibri_carrier_offset = 0; 1549 1550 if (mode == TUNER_MODE_FM_RADIO) { 1551 colibri_carrier_offset = 1100000; 1552 } else if (standerd & (V4L2_STD_MN | V4L2_STD_NTSC_M_JP)) { 1553 colibri_carrier_offset = 4832000; /*4.83MHz */ 1554 } else if (standerd & (V4L2_STD_PAL_B | V4L2_STD_PAL_G)) { 1555 colibri_carrier_offset = 2700000; /*2.70MHz */ 1556 } else if (standerd & (V4L2_STD_PAL_D | V4L2_STD_PAL_I 1557 | V4L2_STD_SECAM)) { 1558 colibri_carrier_offset = 2100000; /*2.10MHz */ 1559 } 1560 1561 return colibri_carrier_offset; 1562 } 1563 1564 void cx231xx_set_DIF_bandpass(struct cx231xx *dev, u32 if_freq, 1565 u8 spectral_invert, u32 mode) 1566 { 1567 unsigned long pll_freq_word; 1568 u32 dif_misc_ctrl_value = 0; 1569 u64 pll_freq_u64 = 0; 1570 u32 i = 0; 1571 1572 dev_dbg(dev->dev, "if_freq=%d;spectral_invert=0x%x;mode=0x%x\n", 1573 if_freq, spectral_invert, mode); 1574 1575 1576 if (mode == TUNER_MODE_FM_RADIO) { 1577 pll_freq_word = 0x905A1CAC; 1578 vid_blk_write_word(dev, DIF_PLL_FREQ_WORD, pll_freq_word); 1579 1580 } else /*KSPROPERTY_TUNER_MODE_TV*/{ 1581 /* Calculate the PLL frequency word based on the adjusted if_freq*/ 1582 pll_freq_word = if_freq; 1583 pll_freq_u64 = (u64)pll_freq_word << 28L; 1584 do_div(pll_freq_u64, 50000000); 1585 pll_freq_word = (u32)pll_freq_u64; 1586 /*pll_freq_word = 0x3463497;*/ 1587 vid_blk_write_word(dev, DIF_PLL_FREQ_WORD, pll_freq_word); 1588 1589 if (spectral_invert) { 1590 if_freq -= 400000; 1591 /* Enable Spectral Invert*/ 1592 vid_blk_read_word(dev, DIF_MISC_CTRL, 1593 &dif_misc_ctrl_value); 1594 dif_misc_ctrl_value = dif_misc_ctrl_value | 0x00200000; 1595 vid_blk_write_word(dev, DIF_MISC_CTRL, 1596 dif_misc_ctrl_value); 1597 } else { 1598 if_freq += 400000; 1599 /* Disable Spectral Invert*/ 1600 vid_blk_read_word(dev, DIF_MISC_CTRL, 1601 &dif_misc_ctrl_value); 1602 dif_misc_ctrl_value = dif_misc_ctrl_value & 0xFFDFFFFF; 1603 vid_blk_write_word(dev, DIF_MISC_CTRL, 1604 dif_misc_ctrl_value); 1605 } 1606 1607 if_freq = (if_freq / 100000) * 100000; 1608 1609 if (if_freq < 3000000) 1610 if_freq = 3000000; 1611 1612 if (if_freq > 16000000) 1613 if_freq = 16000000; 1614 } 1615 1616 dev_dbg(dev->dev, "Enter IF=%zu\n", ARRAY_SIZE(Dif_set_array)); 1617 for (i = 0; i < ARRAY_SIZE(Dif_set_array); i++) { 1618 if (Dif_set_array[i].if_freq == if_freq) { 1619 vid_blk_write_word(dev, 1620 Dif_set_array[i].register_address, Dif_set_array[i].value); 1621 } 1622 } 1623 } 1624 1625 /****************************************************************************** 1626 * D I F - B L O C K C O N T R O L functions * 1627 ******************************************************************************/ 1628 int cx231xx_dif_configure_C2HH_for_low_IF(struct cx231xx *dev, u32 mode, 1629 u32 function_mode, u32 standard) 1630 { 1631 int status = 0; 1632 1633 1634 if (mode == V4L2_TUNER_RADIO) { 1635 /* C2HH */ 1636 /* lo if big signal */ 1637 status = cx231xx_reg_mask_write(dev, 1638 VID_BLK_I2C_ADDRESS, 32, 1639 AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); 1640 /* FUNC_MODE = DIF */ 1641 status = cx231xx_reg_mask_write(dev, 1642 VID_BLK_I2C_ADDRESS, 32, 1643 AFE_CTRL_C2HH_SRC_CTRL, 23, 24, function_mode); 1644 /* IF_MODE */ 1645 status = cx231xx_reg_mask_write(dev, 1646 VID_BLK_I2C_ADDRESS, 32, 1647 AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xFF); 1648 /* no inv */ 1649 status = cx231xx_reg_mask_write(dev, 1650 VID_BLK_I2C_ADDRESS, 32, 1651 AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); 1652 } else if (standard != DIF_USE_BASEBAND) { 1653 if (standard & V4L2_STD_MN) { 1654 /* lo if big signal */ 1655 status = cx231xx_reg_mask_write(dev, 1656 VID_BLK_I2C_ADDRESS, 32, 1657 AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); 1658 /* FUNC_MODE = DIF */ 1659 status = cx231xx_reg_mask_write(dev, 1660 VID_BLK_I2C_ADDRESS, 32, 1661 AFE_CTRL_C2HH_SRC_CTRL, 23, 24, 1662 function_mode); 1663 /* IF_MODE */ 1664 status = cx231xx_reg_mask_write(dev, 1665 VID_BLK_I2C_ADDRESS, 32, 1666 AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xb); 1667 /* no inv */ 1668 status = cx231xx_reg_mask_write(dev, 1669 VID_BLK_I2C_ADDRESS, 32, 1670 AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); 1671 /* 0x124, AUD_CHAN1_SRC = 0x3 */ 1672 status = cx231xx_reg_mask_write(dev, 1673 VID_BLK_I2C_ADDRESS, 32, 1674 AUD_IO_CTRL, 0, 31, 0x00000003); 1675 } else if ((standard == V4L2_STD_PAL_I) | 1676 (standard & V4L2_STD_PAL_D) | 1677 (standard & V4L2_STD_SECAM)) { 1678 /* C2HH setup */ 1679 /* lo if big signal */ 1680 status = cx231xx_reg_mask_write(dev, 1681 VID_BLK_I2C_ADDRESS, 32, 1682 AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); 1683 /* FUNC_MODE = DIF */ 1684 status = cx231xx_reg_mask_write(dev, 1685 VID_BLK_I2C_ADDRESS, 32, 1686 AFE_CTRL_C2HH_SRC_CTRL, 23, 24, 1687 function_mode); 1688 /* IF_MODE */ 1689 status = cx231xx_reg_mask_write(dev, 1690 VID_BLK_I2C_ADDRESS, 32, 1691 AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xF); 1692 /* no inv */ 1693 status = cx231xx_reg_mask_write(dev, 1694 VID_BLK_I2C_ADDRESS, 32, 1695 AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); 1696 } else { 1697 /* default PAL BG */ 1698 /* C2HH setup */ 1699 /* lo if big signal */ 1700 status = cx231xx_reg_mask_write(dev, 1701 VID_BLK_I2C_ADDRESS, 32, 1702 AFE_CTRL_C2HH_SRC_CTRL, 30, 31, 0x1); 1703 /* FUNC_MODE = DIF */ 1704 status = cx231xx_reg_mask_write(dev, 1705 VID_BLK_I2C_ADDRESS, 32, 1706 AFE_CTRL_C2HH_SRC_CTRL, 23, 24, 1707 function_mode); 1708 /* IF_MODE */ 1709 status = cx231xx_reg_mask_write(dev, 1710 VID_BLK_I2C_ADDRESS, 32, 1711 AFE_CTRL_C2HH_SRC_CTRL, 15, 22, 0xE); 1712 /* no inv */ 1713 status = cx231xx_reg_mask_write(dev, 1714 VID_BLK_I2C_ADDRESS, 32, 1715 AFE_CTRL_C2HH_SRC_CTRL, 9, 9, 0x1); 1716 } 1717 } 1718 1719 return status; 1720 } 1721 1722 int cx231xx_dif_set_standard(struct cx231xx *dev, u32 standard) 1723 { 1724 int status = 0; 1725 u32 dif_misc_ctrl_value = 0; 1726 u32 func_mode = 0; 1727 1728 dev_dbg(dev->dev, "%s: setStandard to %x\n", __func__, standard); 1729 1730 status = vid_blk_read_word(dev, DIF_MISC_CTRL, &dif_misc_ctrl_value); 1731 if (standard != DIF_USE_BASEBAND) 1732 dev->norm = standard; 1733 1734 switch (dev->model) { 1735 case CX231XX_BOARD_CNXT_CARRAERA: 1736 case CX231XX_BOARD_CNXT_RDE_250: 1737 case CX231XX_BOARD_CNXT_SHELBY: 1738 case CX231XX_BOARD_CNXT_RDU_250: 1739 case CX231XX_BOARD_CNXT_VIDEO_GRABBER: 1740 case CX231XX_BOARD_HAUPPAUGE_EXETER: 1741 case CX231XX_BOARD_OTG102: 1742 func_mode = 0x03; 1743 break; 1744 case CX231XX_BOARD_CNXT_RDE_253S: 1745 case CX231XX_BOARD_CNXT_RDU_253S: 1746 case CX231XX_BOARD_HAUPPAUGE_USB2_FM_PAL: 1747 case CX231XX_BOARD_HAUPPAUGE_USB2_FM_NTSC: 1748 func_mode = 0x01; 1749 break; 1750 default: 1751 func_mode = 0x01; 1752 } 1753 1754 status = cx231xx_dif_configure_C2HH_for_low_IF(dev, dev->active_mode, 1755 func_mode, standard); 1756 1757 if (standard == DIF_USE_BASEBAND) { /* base band */ 1758 /* There is a different SRC_PHASE_INC value 1759 for baseband vs. DIF */ 1760 status = vid_blk_write_word(dev, DIF_SRC_PHASE_INC, 0xDF7DF83); 1761 status = vid_blk_read_word(dev, DIF_MISC_CTRL, 1762 &dif_misc_ctrl_value); 1763 dif_misc_ctrl_value |= FLD_DIF_DIF_BYPASS; 1764 status = vid_blk_write_word(dev, DIF_MISC_CTRL, 1765 dif_misc_ctrl_value); 1766 } else if (standard & V4L2_STD_PAL_D) { 1767 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1768 DIF_PLL_CTRL, 0, 31, 0x6503bc0c); 1769 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1770 DIF_PLL_CTRL1, 0, 31, 0xbd038c85); 1771 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1772 DIF_PLL_CTRL2, 0, 31, 0x1db4640a); 1773 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1774 DIF_PLL_CTRL3, 0, 31, 0x00008800); 1775 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1776 DIF_AGC_IF_REF, 0, 31, 0x444C1380); 1777 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1778 DIF_AGC_CTRL_IF, 0, 31, 0xDA302600); 1779 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1780 DIF_AGC_CTRL_INT, 0, 31, 0xDA261700); 1781 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1782 DIF_AGC_CTRL_RF, 0, 31, 0xDA262600); 1783 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1784 DIF_AGC_IF_INT_CURRENT, 0, 31, 1785 0x26001700); 1786 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1787 DIF_AGC_RF_CURRENT, 0, 31, 1788 0x00002660); 1789 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1790 DIF_VIDEO_AGC_CTRL, 0, 31, 1791 0x72500800); 1792 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1793 DIF_VID_AUD_OVERRIDE, 0, 31, 1794 0x27000100); 1795 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1796 DIF_AV_SEP_CTRL, 0, 31, 0x3F3934EA); 1797 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1798 DIF_COMP_FLT_CTRL, 0, 31, 1799 0x00000000); 1800 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1801 DIF_SRC_PHASE_INC, 0, 31, 1802 0x1befbf06); 1803 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1804 DIF_SRC_GAIN_CONTROL, 0, 31, 1805 0x000035e8); 1806 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1807 DIF_RPT_VARIANCE, 0, 31, 0x00000000); 1808 /* Save the Spec Inversion value */ 1809 dif_misc_ctrl_value &= FLD_DIF_SPEC_INV; 1810 dif_misc_ctrl_value |= 0x3a023F11; 1811 } else if (standard & V4L2_STD_PAL_I) { 1812 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1813 DIF_PLL_CTRL, 0, 31, 0x6503bc0c); 1814 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1815 DIF_PLL_CTRL1, 0, 31, 0xbd038c85); 1816 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1817 DIF_PLL_CTRL2, 0, 31, 0x1db4640a); 1818 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1819 DIF_PLL_CTRL3, 0, 31, 0x00008800); 1820 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1821 DIF_AGC_IF_REF, 0, 31, 0x444C1380); 1822 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1823 DIF_AGC_CTRL_IF, 0, 31, 0xDA302600); 1824 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1825 DIF_AGC_CTRL_INT, 0, 31, 0xDA261700); 1826 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1827 DIF_AGC_CTRL_RF, 0, 31, 0xDA262600); 1828 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1829 DIF_AGC_IF_INT_CURRENT, 0, 31, 1830 0x26001700); 1831 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1832 DIF_AGC_RF_CURRENT, 0, 31, 1833 0x00002660); 1834 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1835 DIF_VIDEO_AGC_CTRL, 0, 31, 1836 0x72500800); 1837 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1838 DIF_VID_AUD_OVERRIDE, 0, 31, 1839 0x27000100); 1840 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1841 DIF_AV_SEP_CTRL, 0, 31, 0x5F39A934); 1842 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1843 DIF_COMP_FLT_CTRL, 0, 31, 1844 0x00000000); 1845 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1846 DIF_SRC_PHASE_INC, 0, 31, 1847 0x1befbf06); 1848 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1849 DIF_SRC_GAIN_CONTROL, 0, 31, 1850 0x000035e8); 1851 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1852 DIF_RPT_VARIANCE, 0, 31, 0x00000000); 1853 /* Save the Spec Inversion value */ 1854 dif_misc_ctrl_value &= FLD_DIF_SPEC_INV; 1855 dif_misc_ctrl_value |= 0x3a033F11; 1856 } else if (standard & V4L2_STD_PAL_M) { 1857 /* improved Low Frequency Phase Noise */ 1858 status = vid_blk_write_word(dev, DIF_PLL_CTRL, 0xFF01FF0C); 1859 status = vid_blk_write_word(dev, DIF_PLL_CTRL1, 0xbd038c85); 1860 status = vid_blk_write_word(dev, DIF_PLL_CTRL2, 0x1db4640a); 1861 status = vid_blk_write_word(dev, DIF_PLL_CTRL3, 0x00008800); 1862 status = vid_blk_write_word(dev, DIF_AGC_IF_REF, 0x444C1380); 1863 status = vid_blk_write_word(dev, DIF_AGC_IF_INT_CURRENT, 1864 0x26001700); 1865 status = vid_blk_write_word(dev, DIF_AGC_RF_CURRENT, 1866 0x00002660); 1867 status = vid_blk_write_word(dev, DIF_VIDEO_AGC_CTRL, 1868 0x72500800); 1869 status = vid_blk_write_word(dev, DIF_VID_AUD_OVERRIDE, 1870 0x27000100); 1871 status = vid_blk_write_word(dev, DIF_AV_SEP_CTRL, 0x012c405d); 1872 status = vid_blk_write_word(dev, DIF_COMP_FLT_CTRL, 1873 0x009f50c1); 1874 status = vid_blk_write_word(dev, DIF_SRC_PHASE_INC, 1875 0x1befbf06); 1876 status = vid_blk_write_word(dev, DIF_SRC_GAIN_CONTROL, 1877 0x000035e8); 1878 status = vid_blk_write_word(dev, DIF_SOFT_RST_CTRL_REVB, 1879 0x00000000); 1880 /* Save the Spec Inversion value */ 1881 dif_misc_ctrl_value &= FLD_DIF_SPEC_INV; 1882 dif_misc_ctrl_value |= 0x3A0A3F10; 1883 } else if (standard & (V4L2_STD_PAL_N | V4L2_STD_PAL_Nc)) { 1884 /* improved Low Frequency Phase Noise */ 1885 status = vid_blk_write_word(dev, DIF_PLL_CTRL, 0xFF01FF0C); 1886 status = vid_blk_write_word(dev, DIF_PLL_CTRL1, 0xbd038c85); 1887 status = vid_blk_write_word(dev, DIF_PLL_CTRL2, 0x1db4640a); 1888 status = vid_blk_write_word(dev, DIF_PLL_CTRL3, 0x00008800); 1889 status = vid_blk_write_word(dev, DIF_AGC_IF_REF, 0x444C1380); 1890 status = vid_blk_write_word(dev, DIF_AGC_IF_INT_CURRENT, 1891 0x26001700); 1892 status = vid_blk_write_word(dev, DIF_AGC_RF_CURRENT, 1893 0x00002660); 1894 status = vid_blk_write_word(dev, DIF_VIDEO_AGC_CTRL, 1895 0x72500800); 1896 status = vid_blk_write_word(dev, DIF_VID_AUD_OVERRIDE, 1897 0x27000100); 1898 status = vid_blk_write_word(dev, DIF_AV_SEP_CTRL, 1899 0x012c405d); 1900 status = vid_blk_write_word(dev, DIF_COMP_FLT_CTRL, 1901 0x009f50c1); 1902 status = vid_blk_write_word(dev, DIF_SRC_PHASE_INC, 1903 0x1befbf06); 1904 status = vid_blk_write_word(dev, DIF_SRC_GAIN_CONTROL, 1905 0x000035e8); 1906 status = vid_blk_write_word(dev, DIF_SOFT_RST_CTRL_REVB, 1907 0x00000000); 1908 /* Save the Spec Inversion value */ 1909 dif_misc_ctrl_value &= FLD_DIF_SPEC_INV; 1910 dif_misc_ctrl_value = 0x3A093F10; 1911 } else if (standard & 1912 (V4L2_STD_SECAM_B | V4L2_STD_SECAM_D | V4L2_STD_SECAM_G | 1913 V4L2_STD_SECAM_K | V4L2_STD_SECAM_K1)) { 1914 1915 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1916 DIF_PLL_CTRL, 0, 31, 0x6503bc0c); 1917 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1918 DIF_PLL_CTRL1, 0, 31, 0xbd038c85); 1919 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1920 DIF_PLL_CTRL2, 0, 31, 0x1db4640a); 1921 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1922 DIF_PLL_CTRL3, 0, 31, 0x00008800); 1923 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1924 DIF_AGC_IF_REF, 0, 31, 0x888C0380); 1925 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1926 DIF_AGC_CTRL_IF, 0, 31, 0xe0262600); 1927 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1928 DIF_AGC_CTRL_INT, 0, 31, 0xc2171700); 1929 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1930 DIF_AGC_CTRL_RF, 0, 31, 0xc2262600); 1931 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1932 DIF_AGC_IF_INT_CURRENT, 0, 31, 1933 0x26001700); 1934 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1935 DIF_AGC_RF_CURRENT, 0, 31, 1936 0x00002660); 1937 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1938 DIF_VID_AUD_OVERRIDE, 0, 31, 1939 0x27000100); 1940 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1941 DIF_AV_SEP_CTRL, 0, 31, 0x3F3530ec); 1942 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1943 DIF_COMP_FLT_CTRL, 0, 31, 1944 0x00000000); 1945 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1946 DIF_SRC_PHASE_INC, 0, 31, 1947 0x1befbf06); 1948 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1949 DIF_SRC_GAIN_CONTROL, 0, 31, 1950 0x000035e8); 1951 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1952 DIF_RPT_VARIANCE, 0, 31, 0x00000000); 1953 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1954 DIF_VIDEO_AGC_CTRL, 0, 31, 1955 0xf4000000); 1956 1957 /* Save the Spec Inversion value */ 1958 dif_misc_ctrl_value &= FLD_DIF_SPEC_INV; 1959 dif_misc_ctrl_value |= 0x3a023F11; 1960 } else if (standard & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_LC)) { 1961 /* Is it SECAM_L1? */ 1962 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1963 DIF_PLL_CTRL, 0, 31, 0x6503bc0c); 1964 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1965 DIF_PLL_CTRL1, 0, 31, 0xbd038c85); 1966 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1967 DIF_PLL_CTRL2, 0, 31, 0x1db4640a); 1968 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1969 DIF_PLL_CTRL3, 0, 31, 0x00008800); 1970 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1971 DIF_AGC_IF_REF, 0, 31, 0x888C0380); 1972 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1973 DIF_AGC_CTRL_IF, 0, 31, 0xe0262600); 1974 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1975 DIF_AGC_CTRL_INT, 0, 31, 0xc2171700); 1976 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1977 DIF_AGC_CTRL_RF, 0, 31, 0xc2262600); 1978 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1979 DIF_AGC_IF_INT_CURRENT, 0, 31, 1980 0x26001700); 1981 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1982 DIF_AGC_RF_CURRENT, 0, 31, 1983 0x00002660); 1984 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1985 DIF_VID_AUD_OVERRIDE, 0, 31, 1986 0x27000100); 1987 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1988 DIF_AV_SEP_CTRL, 0, 31, 0x3F3530ec); 1989 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1990 DIF_COMP_FLT_CTRL, 0, 31, 1991 0x00000000); 1992 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1993 DIF_SRC_PHASE_INC, 0, 31, 1994 0x1befbf06); 1995 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1996 DIF_SRC_GAIN_CONTROL, 0, 31, 1997 0x000035e8); 1998 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 1999 DIF_RPT_VARIANCE, 0, 31, 0x00000000); 2000 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 2001 DIF_VIDEO_AGC_CTRL, 0, 31, 2002 0xf2560000); 2003 2004 /* Save the Spec Inversion value */ 2005 dif_misc_ctrl_value &= FLD_DIF_SPEC_INV; 2006 dif_misc_ctrl_value |= 0x3a023F11; 2007 2008 } else if (standard & V4L2_STD_NTSC_M) { 2009 /* V4L2_STD_NTSC_M (75 IRE Setup) Or 2010 V4L2_STD_NTSC_M_JP (Japan, 0 IRE Setup) */ 2011 2012 /* For NTSC the centre frequency of video coming out of 2013 sidewinder is around 7.1MHz or 3.6MHz depending on the 2014 spectral inversion. so for a non spectrally inverted channel 2015 the pll freq word is 0x03420c49 2016 */ 2017 2018 status = vid_blk_write_word(dev, DIF_PLL_CTRL, 0x6503BC0C); 2019 status = vid_blk_write_word(dev, DIF_PLL_CTRL1, 0xBD038C85); 2020 status = vid_blk_write_word(dev, DIF_PLL_CTRL2, 0x1DB4640A); 2021 status = vid_blk_write_word(dev, DIF_PLL_CTRL3, 0x00008800); 2022 status = vid_blk_write_word(dev, DIF_AGC_IF_REF, 0x444C0380); 2023 status = vid_blk_write_word(dev, DIF_AGC_IF_INT_CURRENT, 2024 0x26001700); 2025 status = vid_blk_write_word(dev, DIF_AGC_RF_CURRENT, 2026 0x00002660); 2027 status = vid_blk_write_word(dev, DIF_VIDEO_AGC_CTRL, 2028 0x04000800); 2029 status = vid_blk_write_word(dev, DIF_VID_AUD_OVERRIDE, 2030 0x27000100); 2031 status = vid_blk_write_word(dev, DIF_AV_SEP_CTRL, 0x01296e1f); 2032 2033 status = vid_blk_write_word(dev, DIF_COMP_FLT_CTRL, 2034 0x009f50c1); 2035 status = vid_blk_write_word(dev, DIF_SRC_PHASE_INC, 2036 0x1befbf06); 2037 status = vid_blk_write_word(dev, DIF_SRC_GAIN_CONTROL, 2038 0x000035e8); 2039 2040 status = vid_blk_write_word(dev, DIF_AGC_CTRL_IF, 0xC2262600); 2041 status = vid_blk_write_word(dev, DIF_AGC_CTRL_INT, 2042 0xC2262600); 2043 status = vid_blk_write_word(dev, DIF_AGC_CTRL_RF, 0xC2262600); 2044 2045 /* Save the Spec Inversion value */ 2046 dif_misc_ctrl_value &= FLD_DIF_SPEC_INV; 2047 dif_misc_ctrl_value |= 0x3a003F10; 2048 } else { 2049 /* default PAL BG */ 2050 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 2051 DIF_PLL_CTRL, 0, 31, 0x6503bc0c); 2052 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 2053 DIF_PLL_CTRL1, 0, 31, 0xbd038c85); 2054 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 2055 DIF_PLL_CTRL2, 0, 31, 0x1db4640a); 2056 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 2057 DIF_PLL_CTRL3, 0, 31, 0x00008800); 2058 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 2059 DIF_AGC_IF_REF, 0, 31, 0x444C1380); 2060 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 2061 DIF_AGC_CTRL_IF, 0, 31, 0xDA302600); 2062 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 2063 DIF_AGC_CTRL_INT, 0, 31, 0xDA261700); 2064 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 2065 DIF_AGC_CTRL_RF, 0, 31, 0xDA262600); 2066 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 2067 DIF_AGC_IF_INT_CURRENT, 0, 31, 2068 0x26001700); 2069 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 2070 DIF_AGC_RF_CURRENT, 0, 31, 2071 0x00002660); 2072 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 2073 DIF_VIDEO_AGC_CTRL, 0, 31, 2074 0x72500800); 2075 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 2076 DIF_VID_AUD_OVERRIDE, 0, 31, 2077 0x27000100); 2078 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 2079 DIF_AV_SEP_CTRL, 0, 31, 0x3F3530EC); 2080 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 2081 DIF_COMP_FLT_CTRL, 0, 31, 2082 0x00A653A8); 2083 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 2084 DIF_SRC_PHASE_INC, 0, 31, 2085 0x1befbf06); 2086 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 2087 DIF_SRC_GAIN_CONTROL, 0, 31, 2088 0x000035e8); 2089 status = cx231xx_reg_mask_write(dev, VID_BLK_I2C_ADDRESS, 32, 2090 DIF_RPT_VARIANCE, 0, 31, 0x00000000); 2091 /* Save the Spec Inversion value */ 2092 dif_misc_ctrl_value &= FLD_DIF_SPEC_INV; 2093 dif_misc_ctrl_value |= 0x3a013F11; 2094 } 2095 2096 /* The AGC values should be the same for all standards, 2097 AUD_SRC_SEL[19] should always be disabled */ 2098 dif_misc_ctrl_value &= ~FLD_DIF_AUD_SRC_SEL; 2099 2100 /* It is still possible to get Set Standard calls even when we 2101 are in FM mode. 2102 This is done to override the value for FM. */ 2103 if (dev->active_mode == V4L2_TUNER_RADIO) 2104 dif_misc_ctrl_value = 0x7a080000; 2105 2106 /* Write the calculated value for misc ontrol register */ 2107 status = vid_blk_write_word(dev, DIF_MISC_CTRL, dif_misc_ctrl_value); 2108 2109 return status; 2110 } 2111 2112 int cx231xx_tuner_pre_channel_change(struct cx231xx *dev) 2113 { 2114 int status = 0; 2115 u32 dwval; 2116 2117 /* Set the RF and IF k_agc values to 3 */ 2118 status = vid_blk_read_word(dev, DIF_AGC_IF_REF, &dwval); 2119 dwval &= ~(FLD_DIF_K_AGC_RF | FLD_DIF_K_AGC_IF); 2120 dwval |= 0x33000000; 2121 2122 status = vid_blk_write_word(dev, DIF_AGC_IF_REF, dwval); 2123 2124 return status; 2125 } 2126 2127 int cx231xx_tuner_post_channel_change(struct cx231xx *dev) 2128 { 2129 int status = 0; 2130 u32 dwval; 2131 dev_dbg(dev->dev, "%s: dev->tuner_type =0%d\n", 2132 __func__, dev->tuner_type); 2133 /* Set the RF and IF k_agc values to 4 for PAL/NTSC and 8 for 2134 * SECAM L/B/D standards */ 2135 status = vid_blk_read_word(dev, DIF_AGC_IF_REF, &dwval); 2136 dwval &= ~(FLD_DIF_K_AGC_RF | FLD_DIF_K_AGC_IF); 2137 2138 if (dev->norm & (V4L2_STD_SECAM_L | V4L2_STD_SECAM_B | 2139 V4L2_STD_SECAM_D)) { 2140 if (dev->tuner_type == TUNER_NXP_TDA18271) { 2141 dwval &= ~FLD_DIF_IF_REF; 2142 dwval |= 0x88000300; 2143 } else 2144 dwval |= 0x88000000; 2145 } else { 2146 if (dev->tuner_type == TUNER_NXP_TDA18271) { 2147 dwval &= ~FLD_DIF_IF_REF; 2148 dwval |= 0xCC000300; 2149 } else 2150 dwval |= 0x44000000; 2151 } 2152 2153 status = vid_blk_write_word(dev, DIF_AGC_IF_REF, dwval); 2154 2155 return status == sizeof(dwval) ? 0 : -EIO; 2156 } 2157 2158 /****************************************************************************** 2159 * I 2 S - B L O C K C O N T R O L functions * 2160 ******************************************************************************/ 2161 int cx231xx_i2s_blk_initialize(struct cx231xx *dev) 2162 { 2163 int status = 0; 2164 u32 value; 2165 2166 status = cx231xx_read_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS, 2167 CH_PWR_CTRL1, 1, &value, 1); 2168 /* enables clock to delta-sigma and decimation filter */ 2169 value |= 0x80; 2170 status = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS, 2171 CH_PWR_CTRL1, 1, value, 1); 2172 /* power up all channel */ 2173 status = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS, 2174 CH_PWR_CTRL2, 1, 0x00, 1); 2175 2176 return status; 2177 } 2178 2179 int cx231xx_i2s_blk_update_power_control(struct cx231xx *dev, 2180 enum AV_MODE avmode) 2181 { 2182 int status = 0; 2183 u32 value = 0; 2184 2185 if (avmode != POLARIS_AVMODE_ENXTERNAL_AV) { 2186 status = cx231xx_read_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS, 2187 CH_PWR_CTRL2, 1, &value, 1); 2188 value |= 0xfe; 2189 status = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS, 2190 CH_PWR_CTRL2, 1, value, 1); 2191 } else { 2192 status = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS, 2193 CH_PWR_CTRL2, 1, 0x00, 1); 2194 } 2195 2196 return status; 2197 } 2198 2199 /* set i2s_blk for audio input types */ 2200 int cx231xx_i2s_blk_set_audio_input(struct cx231xx *dev, u8 audio_input) 2201 { 2202 int status = 0; 2203 2204 switch (audio_input) { 2205 case CX231XX_AMUX_LINE_IN: 2206 status = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS, 2207 CH_PWR_CTRL2, 1, 0x00, 1); 2208 status = cx231xx_write_i2c_data(dev, I2S_BLK_DEVICE_ADDRESS, 2209 CH_PWR_CTRL1, 1, 0x80, 1); 2210 break; 2211 case CX231XX_AMUX_VIDEO: 2212 default: 2213 break; 2214 } 2215 2216 dev->ctl_ainput = audio_input; 2217 2218 return status; 2219 } 2220 2221 /****************************************************************************** 2222 * P O W E R C O N T R O L functions * 2223 ******************************************************************************/ 2224 int cx231xx_set_power_mode(struct cx231xx *dev, enum AV_MODE mode) 2225 { 2226 u8 value[4] = { 0, 0, 0, 0 }; 2227 u32 tmp = 0; 2228 int status = 0; 2229 2230 if (dev->power_mode != mode) 2231 dev->power_mode = mode; 2232 else { 2233 dev_dbg(dev->dev, "%s: mode = %d, No Change req.\n", 2234 __func__, mode); 2235 return 0; 2236 } 2237 2238 status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN, value, 2239 4); 2240 if (status < 0) 2241 return status; 2242 2243 tmp = le32_to_cpu(*((__le32 *) value)); 2244 2245 switch (mode) { 2246 case POLARIS_AVMODE_ENXTERNAL_AV: 2247 2248 tmp &= (~PWR_MODE_MASK); 2249 2250 tmp |= PWR_AV_EN; 2251 value[0] = (u8) tmp; 2252 value[1] = (u8) (tmp >> 8); 2253 value[2] = (u8) (tmp >> 16); 2254 value[3] = (u8) (tmp >> 24); 2255 status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, 2256 PWR_CTL_EN, value, 4); 2257 msleep(PWR_SLEEP_INTERVAL); 2258 2259 tmp |= PWR_ISO_EN; 2260 value[0] = (u8) tmp; 2261 value[1] = (u8) (tmp >> 8); 2262 value[2] = (u8) (tmp >> 16); 2263 value[3] = (u8) (tmp >> 24); 2264 status = 2265 cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, PWR_CTL_EN, 2266 value, 4); 2267 msleep(PWR_SLEEP_INTERVAL); 2268 2269 tmp |= POLARIS_AVMODE_ENXTERNAL_AV; 2270 value[0] = (u8) tmp; 2271 value[1] = (u8) (tmp >> 8); 2272 value[2] = (u8) (tmp >> 16); 2273 value[3] = (u8) (tmp >> 24); 2274 status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, 2275 PWR_CTL_EN, value, 4); 2276 2277 /* reset state of xceive tuner */ 2278 dev->xc_fw_load_done = 0; 2279 break; 2280 2281 case POLARIS_AVMODE_ANALOGT_TV: 2282 2283 tmp |= PWR_DEMOD_EN; 2284 value[0] = (u8) tmp; 2285 value[1] = (u8) (tmp >> 8); 2286 value[2] = (u8) (tmp >> 16); 2287 value[3] = (u8) (tmp >> 24); 2288 status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, 2289 PWR_CTL_EN, value, 4); 2290 msleep(PWR_SLEEP_INTERVAL); 2291 2292 if (!(tmp & PWR_TUNER_EN)) { 2293 tmp |= (PWR_TUNER_EN); 2294 value[0] = (u8) tmp; 2295 value[1] = (u8) (tmp >> 8); 2296 value[2] = (u8) (tmp >> 16); 2297 value[3] = (u8) (tmp >> 24); 2298 status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, 2299 PWR_CTL_EN, value, 4); 2300 msleep(PWR_SLEEP_INTERVAL); 2301 } 2302 2303 if (!(tmp & PWR_AV_EN)) { 2304 tmp |= PWR_AV_EN; 2305 value[0] = (u8) tmp; 2306 value[1] = (u8) (tmp >> 8); 2307 value[2] = (u8) (tmp >> 16); 2308 value[3] = (u8) (tmp >> 24); 2309 status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, 2310 PWR_CTL_EN, value, 4); 2311 msleep(PWR_SLEEP_INTERVAL); 2312 } 2313 if (!(tmp & PWR_ISO_EN)) { 2314 tmp |= PWR_ISO_EN; 2315 value[0] = (u8) tmp; 2316 value[1] = (u8) (tmp >> 8); 2317 value[2] = (u8) (tmp >> 16); 2318 value[3] = (u8) (tmp >> 24); 2319 status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, 2320 PWR_CTL_EN, value, 4); 2321 msleep(PWR_SLEEP_INTERVAL); 2322 } 2323 2324 if (!(tmp & POLARIS_AVMODE_ANALOGT_TV)) { 2325 tmp |= POLARIS_AVMODE_ANALOGT_TV; 2326 value[0] = (u8) tmp; 2327 value[1] = (u8) (tmp >> 8); 2328 value[2] = (u8) (tmp >> 16); 2329 value[3] = (u8) (tmp >> 24); 2330 status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, 2331 PWR_CTL_EN, value, 4); 2332 msleep(PWR_SLEEP_INTERVAL); 2333 } 2334 2335 if (dev->board.tuner_type != TUNER_ABSENT) { 2336 /* reset the Tuner */ 2337 if (dev->board.tuner_gpio) 2338 cx231xx_gpio_set(dev, dev->board.tuner_gpio); 2339 2340 if (dev->cx231xx_reset_analog_tuner) 2341 dev->cx231xx_reset_analog_tuner(dev); 2342 } 2343 2344 break; 2345 2346 case POLARIS_AVMODE_DIGITAL: 2347 if (!(tmp & PWR_TUNER_EN)) { 2348 tmp |= (PWR_TUNER_EN); 2349 value[0] = (u8) tmp; 2350 value[1] = (u8) (tmp >> 8); 2351 value[2] = (u8) (tmp >> 16); 2352 value[3] = (u8) (tmp >> 24); 2353 status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, 2354 PWR_CTL_EN, value, 4); 2355 msleep(PWR_SLEEP_INTERVAL); 2356 } 2357 if (!(tmp & PWR_AV_EN)) { 2358 tmp |= PWR_AV_EN; 2359 value[0] = (u8) tmp; 2360 value[1] = (u8) (tmp >> 8); 2361 value[2] = (u8) (tmp >> 16); 2362 value[3] = (u8) (tmp >> 24); 2363 status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, 2364 PWR_CTL_EN, value, 4); 2365 msleep(PWR_SLEEP_INTERVAL); 2366 } 2367 if (!(tmp & PWR_ISO_EN)) { 2368 tmp |= PWR_ISO_EN; 2369 value[0] = (u8) tmp; 2370 value[1] = (u8) (tmp >> 8); 2371 value[2] = (u8) (tmp >> 16); 2372 value[3] = (u8) (tmp >> 24); 2373 status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, 2374 PWR_CTL_EN, value, 4); 2375 msleep(PWR_SLEEP_INTERVAL); 2376 } 2377 2378 tmp &= (~PWR_AV_MODE); 2379 tmp |= POLARIS_AVMODE_DIGITAL; 2380 value[0] = (u8) tmp; 2381 value[1] = (u8) (tmp >> 8); 2382 value[2] = (u8) (tmp >> 16); 2383 value[3] = (u8) (tmp >> 24); 2384 status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, 2385 PWR_CTL_EN, value, 4); 2386 msleep(PWR_SLEEP_INTERVAL); 2387 2388 if (!(tmp & PWR_DEMOD_EN)) { 2389 tmp |= PWR_DEMOD_EN; 2390 value[0] = (u8) tmp; 2391 value[1] = (u8) (tmp >> 8); 2392 value[2] = (u8) (tmp >> 16); 2393 value[3] = (u8) (tmp >> 24); 2394 status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, 2395 PWR_CTL_EN, value, 4); 2396 msleep(PWR_SLEEP_INTERVAL); 2397 } 2398 2399 if (dev->board.tuner_type != TUNER_ABSENT) { 2400 /* reset the Tuner */ 2401 if (dev->board.tuner_gpio) 2402 cx231xx_gpio_set(dev, dev->board.tuner_gpio); 2403 2404 if (dev->cx231xx_reset_analog_tuner) 2405 dev->cx231xx_reset_analog_tuner(dev); 2406 } 2407 break; 2408 2409 default: 2410 break; 2411 } 2412 2413 msleep(PWR_SLEEP_INTERVAL); 2414 2415 /* For power saving, only enable Pwr_resetout_n 2416 when digital TV is selected. */ 2417 if (mode == POLARIS_AVMODE_DIGITAL) { 2418 tmp |= PWR_RESETOUT_EN; 2419 value[0] = (u8) tmp; 2420 value[1] = (u8) (tmp >> 8); 2421 value[2] = (u8) (tmp >> 16); 2422 value[3] = (u8) (tmp >> 24); 2423 status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, 2424 PWR_CTL_EN, value, 4); 2425 msleep(PWR_SLEEP_INTERVAL); 2426 } 2427 2428 /* update power control for afe */ 2429 status = cx231xx_afe_update_power_control(dev, mode); 2430 2431 /* update power control for i2s_blk */ 2432 status = cx231xx_i2s_blk_update_power_control(dev, mode); 2433 2434 status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN, value, 2435 4); 2436 2437 return status; 2438 } 2439 2440 int cx231xx_power_suspend(struct cx231xx *dev) 2441 { 2442 u8 value[4] = { 0, 0, 0, 0 }; 2443 u32 tmp = 0; 2444 int status = 0; 2445 2446 status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, PWR_CTL_EN, 2447 value, 4); 2448 if (status > 0) 2449 return status; 2450 2451 tmp = le32_to_cpu(*((__le32 *) value)); 2452 tmp &= (~PWR_MODE_MASK); 2453 2454 value[0] = (u8) tmp; 2455 value[1] = (u8) (tmp >> 8); 2456 value[2] = (u8) (tmp >> 16); 2457 value[3] = (u8) (tmp >> 24); 2458 status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, PWR_CTL_EN, 2459 value, 4); 2460 2461 return status; 2462 } 2463 2464 /****************************************************************************** 2465 * S T R E A M C O N T R O L functions * 2466 ******************************************************************************/ 2467 int cx231xx_start_stream(struct cx231xx *dev, u32 ep_mask) 2468 { 2469 u8 value[4] = { 0x0, 0x0, 0x0, 0x0 }; 2470 u32 tmp = 0; 2471 int status = 0; 2472 2473 dev_dbg(dev->dev, "%s: ep_mask = %x\n", __func__, ep_mask); 2474 status = cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET, 2475 value, 4); 2476 if (status < 0) 2477 return status; 2478 2479 tmp = le32_to_cpu(*((__le32 *) value)); 2480 tmp |= ep_mask; 2481 value[0] = (u8) tmp; 2482 value[1] = (u8) (tmp >> 8); 2483 value[2] = (u8) (tmp >> 16); 2484 value[3] = (u8) (tmp >> 24); 2485 2486 status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, EP_MODE_SET, 2487 value, 4); 2488 2489 return status; 2490 } 2491 2492 int cx231xx_stop_stream(struct cx231xx *dev, u32 ep_mask) 2493 { 2494 u8 value[4] = { 0x0, 0x0, 0x0, 0x0 }; 2495 u32 tmp = 0; 2496 int status = 0; 2497 2498 dev_dbg(dev->dev, "%s: ep_mask = %x\n", __func__, ep_mask); 2499 status = 2500 cx231xx_read_ctrl_reg(dev, VRT_GET_REGISTER, EP_MODE_SET, value, 4); 2501 if (status < 0) 2502 return status; 2503 2504 tmp = le32_to_cpu(*((__le32 *) value)); 2505 tmp &= (~ep_mask); 2506 value[0] = (u8) tmp; 2507 value[1] = (u8) (tmp >> 8); 2508 value[2] = (u8) (tmp >> 16); 2509 value[3] = (u8) (tmp >> 24); 2510 2511 status = cx231xx_write_ctrl_reg(dev, VRT_SET_REGISTER, EP_MODE_SET, 2512 value, 4); 2513 2514 return status; 2515 } 2516 2517 int cx231xx_initialize_stream_xfer(struct cx231xx *dev, u32 media_type) 2518 { 2519 int status = 0; 2520 u32 value = 0; 2521 u8 val[4] = { 0, 0, 0, 0 }; 2522 2523 if (dev->udev->speed == USB_SPEED_HIGH) { 2524 switch (media_type) { 2525 case Audio: 2526 dev_dbg(dev->dev, 2527 "%s: Audio enter HANC\n", __func__); 2528 status = 2529 cx231xx_mode_register(dev, TS_MODE_REG, 0x9300); 2530 break; 2531 2532 case Vbi: 2533 dev_dbg(dev->dev, 2534 "%s: set vanc registers\n", __func__); 2535 status = cx231xx_mode_register(dev, TS_MODE_REG, 0x300); 2536 break; 2537 2538 case Sliced_cc: 2539 dev_dbg(dev->dev, 2540 "%s: set hanc registers\n", __func__); 2541 status = 2542 cx231xx_mode_register(dev, TS_MODE_REG, 0x1300); 2543 break; 2544 2545 case Raw_Video: 2546 dev_dbg(dev->dev, 2547 "%s: set video registers\n", __func__); 2548 status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100); 2549 break; 2550 2551 case TS1_serial_mode: 2552 dev_dbg(dev->dev, 2553 "%s: set ts1 registers", __func__); 2554 2555 if (dev->board.has_417) { 2556 dev_dbg(dev->dev, 2557 "%s: MPEG\n", __func__); 2558 value &= 0xFFFFFFFC; 2559 value |= 0x3; 2560 2561 status = cx231xx_mode_register(dev, 2562 TS_MODE_REG, value); 2563 2564 val[0] = 0x04; 2565 val[1] = 0xA3; 2566 val[2] = 0x3B; 2567 val[3] = 0x00; 2568 status = cx231xx_write_ctrl_reg(dev, 2569 VRT_SET_REGISTER, 2570 TS1_CFG_REG, val, 4); 2571 2572 val[0] = 0x00; 2573 val[1] = 0x08; 2574 val[2] = 0x00; 2575 val[3] = 0x08; 2576 status = cx231xx_write_ctrl_reg(dev, 2577 VRT_SET_REGISTER, 2578 TS1_LENGTH_REG, val, 4); 2579 } else { 2580 dev_dbg(dev->dev, "%s: BDA\n", __func__); 2581 status = cx231xx_mode_register(dev, 2582 TS_MODE_REG, 0x101); 2583 status = cx231xx_mode_register(dev, 2584 TS1_CFG_REG, 0x010); 2585 } 2586 break; 2587 2588 case TS1_parallel_mode: 2589 dev_dbg(dev->dev, 2590 "%s: set ts1 parallel mode registers\n", 2591 __func__); 2592 status = cx231xx_mode_register(dev, TS_MODE_REG, 0x100); 2593 status = cx231xx_mode_register(dev, TS1_CFG_REG, 0x400); 2594 break; 2595 } 2596 } else { 2597 status = cx231xx_mode_register(dev, TS_MODE_REG, 0x101); 2598 } 2599 2600 return status; 2601 } 2602 2603 int cx231xx_capture_start(struct cx231xx *dev, int start, u8 media_type) 2604 { 2605 int rc = -1; 2606 u32 ep_mask = -1; 2607 struct pcb_config *pcb_config; 2608 2609 /* get EP for media type */ 2610 pcb_config = (struct pcb_config *)&dev->current_pcb_config; 2611 2612 if (pcb_config->config_num) { 2613 switch (media_type) { 2614 case Raw_Video: 2615 ep_mask = ENABLE_EP4; /* ep4 [00:1000] */ 2616 break; 2617 case Audio: 2618 ep_mask = ENABLE_EP3; /* ep3 [00:0100] */ 2619 break; 2620 case Vbi: 2621 ep_mask = ENABLE_EP5; /* ep5 [01:0000] */ 2622 break; 2623 case Sliced_cc: 2624 ep_mask = ENABLE_EP6; /* ep6 [10:0000] */ 2625 break; 2626 case TS1_serial_mode: 2627 case TS1_parallel_mode: 2628 ep_mask = ENABLE_EP1; /* ep1 [00:0001] */ 2629 break; 2630 case TS2: 2631 ep_mask = ENABLE_EP2; /* ep2 [00:0010] */ 2632 break; 2633 } 2634 } 2635 2636 if (start) { 2637 rc = cx231xx_initialize_stream_xfer(dev, media_type); 2638 2639 if (rc < 0) 2640 return rc; 2641 2642 /* enable video capture */ 2643 if (ep_mask > 0) 2644 rc = cx231xx_start_stream(dev, ep_mask); 2645 } else { 2646 /* disable video capture */ 2647 if (ep_mask > 0) 2648 rc = cx231xx_stop_stream(dev, ep_mask); 2649 } 2650 2651 return rc; 2652 } 2653 EXPORT_SYMBOL_GPL(cx231xx_capture_start); 2654 2655 /***************************************************************************** 2656 * G P I O B I T control functions * 2657 ******************************************************************************/ 2658 static int cx231xx_set_gpio_bit(struct cx231xx *dev, u32 gpio_bit, u32 gpio_val) 2659 { 2660 int status = 0; 2661 2662 gpio_val = (__force u32)cpu_to_le32(gpio_val); 2663 status = cx231xx_send_gpio_cmd(dev, gpio_bit, (u8 *)&gpio_val, 4, 0, 0); 2664 2665 return status; 2666 } 2667 2668 static int cx231xx_get_gpio_bit(struct cx231xx *dev, u32 gpio_bit, u32 *gpio_val) 2669 { 2670 __le32 tmp; 2671 int status = 0; 2672 2673 status = cx231xx_send_gpio_cmd(dev, gpio_bit, (u8 *)&tmp, 4, 0, 1); 2674 *gpio_val = le32_to_cpu(tmp); 2675 2676 return status; 2677 } 2678 2679 /* 2680 * cx231xx_set_gpio_direction 2681 * Sets the direction of the GPIO pin to input or output 2682 * 2683 * Parameters : 2684 * pin_number : The GPIO Pin number to program the direction for 2685 * from 0 to 31 2686 * pin_value : The Direction of the GPIO Pin under reference. 2687 * 0 = Input direction 2688 * 1 = Output direction 2689 */ 2690 int cx231xx_set_gpio_direction(struct cx231xx *dev, 2691 int pin_number, int pin_value) 2692 { 2693 int status = 0; 2694 u32 value = 0; 2695 2696 /* Check for valid pin_number - if 32 , bail out */ 2697 if (pin_number >= 32) 2698 return -EINVAL; 2699 2700 /* input */ 2701 if (pin_value == 0) 2702 value = dev->gpio_dir & (~(1 << pin_number)); /* clear */ 2703 else 2704 value = dev->gpio_dir | (1 << pin_number); 2705 2706 status = cx231xx_set_gpio_bit(dev, value, dev->gpio_val); 2707 2708 /* cache the value for future */ 2709 dev->gpio_dir = value; 2710 2711 return status; 2712 } 2713 2714 /* 2715 * cx231xx_set_gpio_value 2716 * Sets the value of the GPIO pin to Logic high or low. The Pin under 2717 * reference should ALREADY BE SET IN OUTPUT MODE !!!!!!!!! 2718 * 2719 * Parameters : 2720 * pin_number : The GPIO Pin number to program the direction for 2721 * pin_value : The value of the GPIO Pin under reference. 2722 * 0 = set it to 0 2723 * 1 = set it to 1 2724 */ 2725 int cx231xx_set_gpio_value(struct cx231xx *dev, int pin_number, int pin_value) 2726 { 2727 int status = 0; 2728 u32 value = 0; 2729 2730 /* Check for valid pin_number - if 0xFF , bail out */ 2731 if (pin_number >= 32) 2732 return -EINVAL; 2733 2734 /* first do a sanity check - if the Pin is not output, make it output */ 2735 if ((dev->gpio_dir & (1 << pin_number)) == 0x00) { 2736 /* It was in input mode */ 2737 value = dev->gpio_dir | (1 << pin_number); 2738 dev->gpio_dir = value; 2739 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, 2740 dev->gpio_val); 2741 value = 0; 2742 } 2743 2744 if (pin_value == 0) 2745 value = dev->gpio_val & (~(1 << pin_number)); 2746 else 2747 value = dev->gpio_val | (1 << pin_number); 2748 2749 /* store the value */ 2750 dev->gpio_val = value; 2751 2752 /* toggle bit0 of GP_IO */ 2753 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val); 2754 2755 return status; 2756 } 2757 2758 /***************************************************************************** 2759 * G P I O I2C related functions * 2760 ******************************************************************************/ 2761 int cx231xx_gpio_i2c_start(struct cx231xx *dev) 2762 { 2763 int status = 0; 2764 2765 /* set SCL to output 1 ; set SDA to output 1 */ 2766 dev->gpio_dir |= 1 << dev->board.tuner_scl_gpio; 2767 dev->gpio_dir |= 1 << dev->board.tuner_sda_gpio; 2768 dev->gpio_val |= 1 << dev->board.tuner_scl_gpio; 2769 dev->gpio_val |= 1 << dev->board.tuner_sda_gpio; 2770 2771 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val); 2772 if (status < 0) 2773 return -EINVAL; 2774 2775 /* set SCL to output 1; set SDA to output 0 */ 2776 dev->gpio_val |= 1 << dev->board.tuner_scl_gpio; 2777 dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio); 2778 2779 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val); 2780 if (status < 0) 2781 return -EINVAL; 2782 2783 /* set SCL to output 0; set SDA to output 0 */ 2784 dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); 2785 dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio); 2786 2787 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val); 2788 if (status < 0) 2789 return -EINVAL; 2790 2791 return status; 2792 } 2793 2794 int cx231xx_gpio_i2c_end(struct cx231xx *dev) 2795 { 2796 int status = 0; 2797 2798 /* set SCL to output 0; set SDA to output 0 */ 2799 dev->gpio_dir |= 1 << dev->board.tuner_scl_gpio; 2800 dev->gpio_dir |= 1 << dev->board.tuner_sda_gpio; 2801 2802 dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); 2803 dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio); 2804 2805 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val); 2806 if (status < 0) 2807 return -EINVAL; 2808 2809 /* set SCL to output 1; set SDA to output 0 */ 2810 dev->gpio_val |= 1 << dev->board.tuner_scl_gpio; 2811 dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio); 2812 2813 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val); 2814 if (status < 0) 2815 return -EINVAL; 2816 2817 /* set SCL to input ,release SCL cable control 2818 set SDA to input ,release SDA cable control */ 2819 dev->gpio_dir &= ~(1 << dev->board.tuner_scl_gpio); 2820 dev->gpio_dir &= ~(1 << dev->board.tuner_sda_gpio); 2821 2822 status = 2823 cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val); 2824 if (status < 0) 2825 return -EINVAL; 2826 2827 return status; 2828 } 2829 2830 int cx231xx_gpio_i2c_write_byte(struct cx231xx *dev, u8 data) 2831 { 2832 int status = 0; 2833 u8 i; 2834 2835 /* set SCL to output ; set SDA to output */ 2836 dev->gpio_dir |= 1 << dev->board.tuner_scl_gpio; 2837 dev->gpio_dir |= 1 << dev->board.tuner_sda_gpio; 2838 2839 for (i = 0; i < 8; i++) { 2840 if (((data << i) & 0x80) == 0) { 2841 /* set SCL to output 0; set SDA to output 0 */ 2842 dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); 2843 dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio); 2844 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, 2845 dev->gpio_val); 2846 2847 /* set SCL to output 1; set SDA to output 0 */ 2848 dev->gpio_val |= 1 << dev->board.tuner_scl_gpio; 2849 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, 2850 dev->gpio_val); 2851 2852 /* set SCL to output 0; set SDA to output 0 */ 2853 dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); 2854 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, 2855 dev->gpio_val); 2856 } else { 2857 /* set SCL to output 0; set SDA to output 1 */ 2858 dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); 2859 dev->gpio_val |= 1 << dev->board.tuner_sda_gpio; 2860 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, 2861 dev->gpio_val); 2862 2863 /* set SCL to output 1; set SDA to output 1 */ 2864 dev->gpio_val |= 1 << dev->board.tuner_scl_gpio; 2865 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, 2866 dev->gpio_val); 2867 2868 /* set SCL to output 0; set SDA to output 1 */ 2869 dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); 2870 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, 2871 dev->gpio_val); 2872 } 2873 } 2874 return status; 2875 } 2876 2877 int cx231xx_gpio_i2c_read_byte(struct cx231xx *dev, u8 *buf) 2878 { 2879 u8 value = 0; 2880 int status = 0; 2881 u32 gpio_logic_value = 0; 2882 u8 i; 2883 2884 /* read byte */ 2885 for (i = 0; i < 8; i++) { /* send write I2c addr */ 2886 2887 /* set SCL to output 0; set SDA to input */ 2888 dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); 2889 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, 2890 dev->gpio_val); 2891 2892 /* set SCL to output 1; set SDA to input */ 2893 dev->gpio_val |= 1 << dev->board.tuner_scl_gpio; 2894 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, 2895 dev->gpio_val); 2896 2897 /* get SDA data bit */ 2898 gpio_logic_value = dev->gpio_val; 2899 status = cx231xx_get_gpio_bit(dev, dev->gpio_dir, 2900 &dev->gpio_val); 2901 if ((dev->gpio_val & (1 << dev->board.tuner_sda_gpio)) != 0) 2902 value |= (1 << (8 - i - 1)); 2903 2904 dev->gpio_val = gpio_logic_value; 2905 } 2906 2907 /* set SCL to output 0,finish the read latest SCL signal. 2908 !!!set SDA to input, never to modify SDA direction at 2909 the same times */ 2910 dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); 2911 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val); 2912 2913 /* store the value */ 2914 *buf = value & 0xff; 2915 2916 return status; 2917 } 2918 2919 int cx231xx_gpio_i2c_read_ack(struct cx231xx *dev) 2920 { 2921 int status = 0; 2922 u32 gpio_logic_value = 0; 2923 int nCnt = 10; 2924 int nInit = nCnt; 2925 2926 /* clock stretch; set SCL to input; set SDA to input; 2927 get SCL value till SCL = 1 */ 2928 dev->gpio_dir &= ~(1 << dev->board.tuner_sda_gpio); 2929 dev->gpio_dir &= ~(1 << dev->board.tuner_scl_gpio); 2930 2931 gpio_logic_value = dev->gpio_val; 2932 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val); 2933 2934 do { 2935 msleep(2); 2936 status = cx231xx_get_gpio_bit(dev, dev->gpio_dir, 2937 &dev->gpio_val); 2938 nCnt--; 2939 } while (((dev->gpio_val & 2940 (1 << dev->board.tuner_scl_gpio)) == 0) && 2941 (nCnt > 0)); 2942 2943 if (nCnt == 0) 2944 dev_dbg(dev->dev, 2945 "No ACK after %d msec -GPIO I2C failed!", 2946 nInit * 10); 2947 2948 /* 2949 * readAck 2950 * through clock stretch, slave has given a SCL signal, 2951 * so the SDA data can be directly read. 2952 */ 2953 status = cx231xx_get_gpio_bit(dev, dev->gpio_dir, &dev->gpio_val); 2954 2955 if ((dev->gpio_val & 1 << dev->board.tuner_sda_gpio) == 0) { 2956 dev->gpio_val = gpio_logic_value; 2957 dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio); 2958 status = 0; 2959 } else { 2960 dev->gpio_val = gpio_logic_value; 2961 dev->gpio_val |= (1 << dev->board.tuner_sda_gpio); 2962 } 2963 2964 /* read SDA end, set the SCL to output 0, after this operation, 2965 SDA direction can be changed. */ 2966 dev->gpio_val = gpio_logic_value; 2967 dev->gpio_dir |= (1 << dev->board.tuner_scl_gpio); 2968 dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); 2969 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val); 2970 2971 return status; 2972 } 2973 2974 int cx231xx_gpio_i2c_write_ack(struct cx231xx *dev) 2975 { 2976 int status = 0; 2977 2978 /* set SDA to output */ 2979 dev->gpio_dir |= 1 << dev->board.tuner_sda_gpio; 2980 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val); 2981 2982 /* set SCL = 0 (output); set SDA = 0 (output) */ 2983 dev->gpio_val &= ~(1 << dev->board.tuner_sda_gpio); 2984 dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); 2985 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val); 2986 2987 /* set SCL = 1 (output); set SDA = 0 (output) */ 2988 dev->gpio_val |= 1 << dev->board.tuner_scl_gpio; 2989 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val); 2990 2991 /* set SCL = 0 (output); set SDA = 0 (output) */ 2992 dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); 2993 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val); 2994 2995 /* set SDA to input,and then the slave will read data from SDA. */ 2996 dev->gpio_dir &= ~(1 << dev->board.tuner_sda_gpio); 2997 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val); 2998 2999 return status; 3000 } 3001 3002 int cx231xx_gpio_i2c_write_nak(struct cx231xx *dev) 3003 { 3004 int status = 0; 3005 3006 /* set scl to output ; set sda to input */ 3007 dev->gpio_dir |= 1 << dev->board.tuner_scl_gpio; 3008 dev->gpio_dir &= ~(1 << dev->board.tuner_sda_gpio); 3009 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val); 3010 3011 /* set scl to output 0; set sda to input */ 3012 dev->gpio_val &= ~(1 << dev->board.tuner_scl_gpio); 3013 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val); 3014 3015 /* set scl to output 1; set sda to input */ 3016 dev->gpio_val |= 1 << dev->board.tuner_scl_gpio; 3017 status = cx231xx_set_gpio_bit(dev, dev->gpio_dir, dev->gpio_val); 3018 3019 return status; 3020 } 3021 3022 /***************************************************************************** 3023 * G P I O I2C related functions * 3024 ******************************************************************************/ 3025 /* cx231xx_gpio_i2c_read 3026 * Function to read data from gpio based I2C interface 3027 */ 3028 int cx231xx_gpio_i2c_read(struct cx231xx *dev, u8 dev_addr, u8 *buf, u8 len) 3029 { 3030 int status = 0; 3031 int i = 0; 3032 3033 /* get the lock */ 3034 mutex_lock(&dev->gpio_i2c_lock); 3035 3036 /* start */ 3037 status = cx231xx_gpio_i2c_start(dev); 3038 3039 /* write dev_addr */ 3040 status = cx231xx_gpio_i2c_write_byte(dev, (dev_addr << 1) + 1); 3041 3042 /* readAck */ 3043 status = cx231xx_gpio_i2c_read_ack(dev); 3044 3045 /* read data */ 3046 for (i = 0; i < len; i++) { 3047 /* read data */ 3048 buf[i] = 0; 3049 status = cx231xx_gpio_i2c_read_byte(dev, &buf[i]); 3050 3051 if ((i + 1) != len) { 3052 /* only do write ack if we more length */ 3053 status = cx231xx_gpio_i2c_write_ack(dev); 3054 } 3055 } 3056 3057 /* write NAK - inform reads are complete */ 3058 status = cx231xx_gpio_i2c_write_nak(dev); 3059 3060 /* write end */ 3061 status = cx231xx_gpio_i2c_end(dev); 3062 3063 /* release the lock */ 3064 mutex_unlock(&dev->gpio_i2c_lock); 3065 3066 return status; 3067 } 3068 3069 /* cx231xx_gpio_i2c_write 3070 * Function to write data to gpio based I2C interface 3071 */ 3072 int cx231xx_gpio_i2c_write(struct cx231xx *dev, u8 dev_addr, u8 *buf, u8 len) 3073 { 3074 int i = 0; 3075 3076 /* get the lock */ 3077 mutex_lock(&dev->gpio_i2c_lock); 3078 3079 /* start */ 3080 cx231xx_gpio_i2c_start(dev); 3081 3082 /* write dev_addr */ 3083 cx231xx_gpio_i2c_write_byte(dev, dev_addr << 1); 3084 3085 /* read Ack */ 3086 cx231xx_gpio_i2c_read_ack(dev); 3087 3088 for (i = 0; i < len; i++) { 3089 /* Write data */ 3090 cx231xx_gpio_i2c_write_byte(dev, buf[i]); 3091 3092 /* read Ack */ 3093 cx231xx_gpio_i2c_read_ack(dev); 3094 } 3095 3096 /* write End */ 3097 cx231xx_gpio_i2c_end(dev); 3098 3099 /* release the lock */ 3100 mutex_unlock(&dev->gpio_i2c_lock); 3101 3102 return 0; 3103 } 3104