1 /*
2  * Linux driver for digital TV devices equipped with B2C2 FlexcopII(b)/III
3  * flexcop-usb.h - header file for the USB part
4  * see flexcop.c for copyright information
5  */
6 #ifndef __FLEXCOP_USB_H_INCLUDED__
7 #define __FLEXCOP_USB_H_INCLUDED__
8 
9 #include <linux/usb.h>
10 
11 /* transfer parameters */
12 #define B2C2_USB_FRAMES_PER_ISO 4
13 #define B2C2_USB_NUM_ISO_URB 4
14 
15 #define B2C2_USB_CTRL_PIPE_IN usb_rcvctrlpipe(fc_usb->udev, 0)
16 #define B2C2_USB_CTRL_PIPE_OUT usb_sndctrlpipe(fc_usb->udev, 0)
17 #define B2C2_USB_DATA_PIPE usb_rcvisocpipe(fc_usb->udev, 0x81)
18 
19 struct flexcop_usb {
20 	struct usb_device *udev;
21 	struct usb_interface *uintf;
22 
23 	u8 *iso_buffer;
24 	int buffer_size;
25 	dma_addr_t dma_addr;
26 
27 	struct urb *iso_urb[B2C2_USB_NUM_ISO_URB];
28 	struct flexcop_device *fc_dev;
29 
30 	u8 tmp_buffer[1023+190];
31 	int tmp_buffer_length;
32 };
33 
34 #if 0
35 /* request types TODO What is its use?*/
36 typedef enum {
37 
38 } flexcop_usb_request_type_t;
39 #endif
40 
41 /* request */
42 typedef enum {
43 	B2C2_USB_WRITE_V8_MEM = 0x04,
44 	B2C2_USB_READ_V8_MEM  = 0x05,
45 	B2C2_USB_READ_REG     = 0x08,
46 	B2C2_USB_WRITE_REG    = 0x0A,
47 	B2C2_USB_WRITEREGHI   = 0x0B,
48 	B2C2_USB_FLASH_BLOCK  = 0x10,
49 	B2C2_USB_I2C_REQUEST  = 0x11,
50 	B2C2_USB_UTILITY      = 0x12,
51 } flexcop_usb_request_t;
52 
53 /* function definition for I2C_REQUEST */
54 typedef enum {
55 	USB_FUNC_I2C_WRITE       = 0x01,
56 	USB_FUNC_I2C_MULTIWRITE  = 0x02,
57 	USB_FUNC_I2C_READ        = 0x03,
58 	USB_FUNC_I2C_REPEATWRITE = 0x04,
59 	USB_FUNC_GET_DESCRIPTOR  = 0x05,
60 	USB_FUNC_I2C_REPEATREAD  = 0x06,
61 	/* DKT 020208 - add this to support special case of DiSEqC */
62 	USB_FUNC_I2C_CHECKWRITE  = 0x07,
63 	USB_FUNC_I2C_CHECKRESULT = 0x08,
64 } flexcop_usb_i2c_function_t;
65 
66 /* function definition for UTILITY request 0x12
67  * DKT 020304 - new utility function */
68 typedef enum {
69 	UTILITY_SET_FILTER          = 0x01,
70 	UTILITY_DATA_ENABLE         = 0x02,
71 	UTILITY_FLEX_MULTIWRITE     = 0x03,
72 	UTILITY_SET_BUFFER_SIZE     = 0x04,
73 	UTILITY_FLEX_OPERATOR       = 0x05,
74 	UTILITY_FLEX_RESET300_START = 0x06,
75 	UTILITY_FLEX_RESET300_STOP  = 0x07,
76 	UTILITY_FLEX_RESET300       = 0x08,
77 	UTILITY_SET_ISO_SIZE        = 0x09,
78 	UTILITY_DATA_RESET          = 0x0A,
79 	UTILITY_GET_DATA_STATUS     = 0x10,
80 	UTILITY_GET_V8_REG          = 0x11,
81 	/* DKT 020326 - add function for v1.14 */
82 	UTILITY_SRAM_WRITE          = 0x12,
83 	UTILITY_SRAM_READ           = 0x13,
84 	UTILITY_SRAM_TESTFILL       = 0x14,
85 	UTILITY_SRAM_TESTSET        = 0x15,
86 	UTILITY_SRAM_TESTVERIFY     = 0x16,
87 } flexcop_usb_utility_function_t;
88 
89 #define B2C2_WAIT_FOR_OPERATION_RW (1*HZ)
90 #define B2C2_WAIT_FOR_OPERATION_RDW (3*HZ)
91 #define B2C2_WAIT_FOR_OPERATION_WDW (1*HZ)
92 
93 #define B2C2_WAIT_FOR_OPERATION_V8READ (3*HZ)
94 #define B2C2_WAIT_FOR_OPERATION_V8WRITE (3*HZ)
95 #define B2C2_WAIT_FOR_OPERATION_V8FLASH (3*HZ)
96 
97 typedef enum {
98 	V8_MEMORY_PAGE_DVB_CI = 0x20,
99 	V8_MEMORY_PAGE_DVB_DS = 0x40,
100 	V8_MEMORY_PAGE_MULTI2 = 0x60,
101 	V8_MEMORY_PAGE_FLASH  = 0x80
102 } flexcop_usb_mem_page_t;
103 
104 #define V8_MEMORY_EXTENDED (1 << 15)
105 #define USB_MEM_READ_MAX   32
106 #define USB_MEM_WRITE_MAX   1
107 #define USB_FLASH_MAX       8
108 #define V8_MEMORY_PAGE_SIZE 0x8000 /* 32K */
109 #define V8_MEMORY_PAGE_MASK 0x7FFF
110 
111 #endif
112