1 /*
2  *  Driver for the Auvitek USB bridge
3  *
4  *  Copyright (c) 2008 Steven Toth <stoth@linuxtv.org>
5  *
6  *  This program is free software; you can redistribute it and/or modify
7  *  it under the terms of the GNU General Public License as published by
8  *  the Free Software Foundation; either version 2 of the License, or
9  *  (at your option) any later version.
10  *
11  *  This program is distributed in the hope that it will be useful,
12  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
13  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
14  *
15  *  GNU General Public License for more details.
16  */
17 
18 #include "au0828.h"
19 
20 #include <linux/module.h>
21 #include <linux/slab.h>
22 #include <linux/init.h>
23 #include <linux/device.h>
24 #include <media/v4l2-common.h>
25 #include <media/tuner.h>
26 
27 #include "au8522.h"
28 #include "xc5000.h"
29 #include "mxl5007t.h"
30 #include "tda18271.h"
31 
32 static int preallocate_big_buffers;
33 module_param_named(preallocate_big_buffers, preallocate_big_buffers, int, 0644);
34 MODULE_PARM_DESC(preallocate_big_buffers, "Preallocate the larger transfer buffers at module load time");
35 
36 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr);
37 
38 #define _AU0828_BULKPIPE 0x83
39 #define _BULKPIPESIZE 0xe522
40 
41 static u8 hauppauge_hvr950q_led_states[] = {
42 	0x00, /* off */
43 	0x02, /* yellow */
44 	0x04, /* green */
45 };
46 
47 static struct au8522_led_config hauppauge_hvr950q_led_cfg = {
48 	.gpio_output = 0x00e0,
49 	.gpio_output_enable  = 0x6006,
50 	.gpio_output_disable = 0x0660,
51 
52 	.gpio_leds = 0x00e2,
53 	.led_states  = hauppauge_hvr950q_led_states,
54 	.num_led_states = sizeof(hauppauge_hvr950q_led_states),
55 
56 	.vsb8_strong   = 20 /* dB */ * 10,
57 	.qam64_strong  = 25 /* dB */ * 10,
58 	.qam256_strong = 32 /* dB */ * 10,
59 };
60 
61 static struct au8522_config hauppauge_hvr950q_config = {
62 	.demod_address = 0x8e >> 1,
63 	.status_mode   = AU8522_DEMODLOCKING,
64 	.qam_if        = AU8522_IF_6MHZ,
65 	.vsb_if        = AU8522_IF_6MHZ,
66 	.led_cfg       = &hauppauge_hvr950q_led_cfg,
67 };
68 
69 static struct au8522_config fusionhdtv7usb_config = {
70 	.demod_address = 0x8e >> 1,
71 	.status_mode   = AU8522_DEMODLOCKING,
72 	.qam_if        = AU8522_IF_6MHZ,
73 	.vsb_if        = AU8522_IF_6MHZ,
74 };
75 
76 static struct au8522_config hauppauge_woodbury_config = {
77 	.demod_address = 0x8e >> 1,
78 	.status_mode   = AU8522_DEMODLOCKING,
79 	.qam_if        = AU8522_IF_4MHZ,
80 	.vsb_if        = AU8522_IF_3_25MHZ,
81 };
82 
83 static struct xc5000_config hauppauge_xc5000a_config = {
84 	.i2c_address      = 0x61,
85 	.if_khz           = 6000,
86 	.chip_id          = XC5000A,
87 	.output_amp       = 0x8f,
88 };
89 
90 static struct xc5000_config hauppauge_xc5000c_config = {
91 	.i2c_address      = 0x61,
92 	.if_khz           = 6000,
93 	.chip_id          = XC5000C,
94 	.output_amp       = 0x8f,
95 };
96 
97 static struct mxl5007t_config mxl5007t_hvr950q_config = {
98 	.xtal_freq_hz = MxL_XTAL_24_MHZ,
99 	.if_freq_hz = MxL_IF_6_MHZ,
100 };
101 
102 static struct tda18271_config hauppauge_woodbury_tunerconfig = {
103 	.gate    = TDA18271_GATE_DIGITAL,
104 };
105 
106 static void au0828_restart_dvb_streaming(struct work_struct *work);
107 
108 static void au0828_bulk_timeout(unsigned long data)
109 {
110 	struct au0828_dev *dev = (struct au0828_dev *) data;
111 
112 	dprintk(1, "%s called\n", __func__);
113 	dev->bulk_timeout_running = 0;
114 	schedule_work(&dev->restart_streaming);
115 }
116 
117 /*-------------------------------------------------------------------*/
118 static void urb_completion(struct urb *purb)
119 {
120 	struct au0828_dev *dev = purb->context;
121 	int ptype = usb_pipetype(purb->pipe);
122 	unsigned char *ptr;
123 
124 	dprintk(2, "%s: %d\n", __func__, purb->actual_length);
125 
126 	if (!dev) {
127 		dprintk(2, "%s: no dev!\n", __func__);
128 		return;
129 	}
130 
131 	if (!dev->urb_streaming) {
132 		dprintk(2, "%s: not streaming!\n", __func__);
133 		return;
134 	}
135 
136 	if (ptype != PIPE_BULK) {
137 		pr_err("%s: Unsupported URB type %d\n",
138 		       __func__, ptype);
139 		return;
140 	}
141 
142 	/* See if the stream is corrupted (to work around a hardware
143 	   bug where the stream gets misaligned */
144 	ptr = purb->transfer_buffer;
145 	if (purb->actual_length > 0 && ptr[0] != 0x47) {
146 		dprintk(1, "Need to restart streaming %02x len=%d!\n",
147 			ptr[0], purb->actual_length);
148 		schedule_work(&dev->restart_streaming);
149 		return;
150 	} else if (dev->bulk_timeout_running == 1) {
151 		/* The URB handler has fired, so cancel timer which would
152 		 * restart endpoint if we hadn't
153 		 */
154 		dprintk(1, "%s cancelling bulk timeout\n", __func__);
155 		dev->bulk_timeout_running = 0;
156 		del_timer(&dev->bulk_timeout);
157 	}
158 
159 	/* Feed the transport payload into the kernel demux */
160 	dvb_dmx_swfilter_packets(&dev->dvb.demux,
161 		purb->transfer_buffer, purb->actual_length / 188);
162 
163 	/* Clean the buffer before we requeue */
164 	memset(purb->transfer_buffer, 0, URB_BUFSIZE);
165 
166 	/* Requeue URB */
167 	usb_submit_urb(purb, GFP_ATOMIC);
168 }
169 
170 static int stop_urb_transfer(struct au0828_dev *dev)
171 {
172 	int i;
173 
174 	dprintk(2, "%s()\n", __func__);
175 
176 	if (!dev->urb_streaming)
177 		return 0;
178 
179 	if (dev->bulk_timeout_running == 1) {
180 		dev->bulk_timeout_running = 0;
181 		del_timer(&dev->bulk_timeout);
182 	}
183 
184 	dev->urb_streaming = false;
185 	for (i = 0; i < URB_COUNT; i++) {
186 		if (dev->urbs[i]) {
187 			usb_kill_urb(dev->urbs[i]);
188 			if (!preallocate_big_buffers)
189 				kfree(dev->urbs[i]->transfer_buffer);
190 
191 			usb_free_urb(dev->urbs[i]);
192 		}
193 	}
194 
195 	return 0;
196 }
197 
198 static int start_urb_transfer(struct au0828_dev *dev)
199 {
200 	struct urb *purb;
201 	int i, ret;
202 
203 	dprintk(2, "%s()\n", __func__);
204 
205 	if (dev->urb_streaming) {
206 		dprintk(2, "%s: bulk xfer already running!\n", __func__);
207 		return 0;
208 	}
209 
210 	for (i = 0; i < URB_COUNT; i++) {
211 
212 		dev->urbs[i] = usb_alloc_urb(0, GFP_KERNEL);
213 		if (!dev->urbs[i])
214 			return -ENOMEM;
215 
216 		purb = dev->urbs[i];
217 
218 		if (preallocate_big_buffers)
219 			purb->transfer_buffer = dev->dig_transfer_buffer[i];
220 		else
221 			purb->transfer_buffer = kzalloc(URB_BUFSIZE,
222 					GFP_KERNEL);
223 
224 		if (!purb->transfer_buffer) {
225 			usb_free_urb(purb);
226 			dev->urbs[i] = NULL;
227 			ret = -ENOMEM;
228 			pr_err("%s: failed big buffer allocation, err = %d\n",
229 			       __func__, ret);
230 			return ret;
231 		}
232 
233 		purb->status = -EINPROGRESS;
234 		usb_fill_bulk_urb(purb,
235 				  dev->usbdev,
236 				  usb_rcvbulkpipe(dev->usbdev,
237 					_AU0828_BULKPIPE),
238 				  purb->transfer_buffer,
239 				  URB_BUFSIZE,
240 				  urb_completion,
241 				  dev);
242 
243 	}
244 
245 	for (i = 0; i < URB_COUNT; i++) {
246 		ret = usb_submit_urb(dev->urbs[i], GFP_ATOMIC);
247 		if (ret != 0) {
248 			stop_urb_transfer(dev);
249 			pr_err("%s: failed urb submission, err = %d\n",
250 			       __func__, ret);
251 			return ret;
252 		}
253 	}
254 
255 	dev->urb_streaming = true;
256 
257 	/* If we don't valid data within 1 second, restart stream */
258 	mod_timer(&dev->bulk_timeout, jiffies + (HZ));
259 	dev->bulk_timeout_running = 1;
260 
261 	return 0;
262 }
263 
264 static void au0828_start_transport(struct au0828_dev *dev)
265 {
266 	au0828_write(dev, 0x608, 0x90);
267 	au0828_write(dev, 0x609, 0x72);
268 	au0828_write(dev, 0x60a, 0x71);
269 	au0828_write(dev, 0x60b, 0x01);
270 
271 }
272 
273 static void au0828_stop_transport(struct au0828_dev *dev, int full_stop)
274 {
275 	if (full_stop) {
276 		au0828_write(dev, 0x608, 0x00);
277 		au0828_write(dev, 0x609, 0x00);
278 		au0828_write(dev, 0x60a, 0x00);
279 	}
280 	au0828_write(dev, 0x60b, 0x00);
281 }
282 
283 static int au0828_dvb_start_feed(struct dvb_demux_feed *feed)
284 {
285 	struct dvb_demux *demux = feed->demux;
286 	struct au0828_dev *dev = (struct au0828_dev *) demux->priv;
287 	struct au0828_dvb *dvb = &dev->dvb;
288 	int ret = 0;
289 
290 	dprintk(1, "%s()\n", __func__);
291 
292 	if (!demux->dmx.frontend)
293 		return -EINVAL;
294 
295 	if (dvb->frontend) {
296 		mutex_lock(&dvb->lock);
297 		dvb->start_count++;
298 		dprintk(1, "%s(), start_count: %d, stop_count: %d\n", __func__,
299 			dvb->start_count, dvb->stop_count);
300 		if (dvb->feeding++ == 0) {
301 			/* Start transport */
302 			au0828_start_transport(dev);
303 			ret = start_urb_transfer(dev);
304 			if (ret < 0) {
305 				au0828_stop_transport(dev, 0);
306 				dvb->feeding--;	/* We ran out of memory... */
307 			}
308 		}
309 		mutex_unlock(&dvb->lock);
310 	}
311 
312 	return ret;
313 }
314 
315 static int au0828_dvb_stop_feed(struct dvb_demux_feed *feed)
316 {
317 	struct dvb_demux *demux = feed->demux;
318 	struct au0828_dev *dev = (struct au0828_dev *) demux->priv;
319 	struct au0828_dvb *dvb = &dev->dvb;
320 	int ret = 0;
321 
322 	dprintk(1, "%s()\n", __func__);
323 
324 	if (dvb->frontend) {
325 		cancel_work_sync(&dev->restart_streaming);
326 
327 		mutex_lock(&dvb->lock);
328 		dvb->stop_count++;
329 		dprintk(1, "%s(), start_count: %d, stop_count: %d\n", __func__,
330 			dvb->start_count, dvb->stop_count);
331 		if (dvb->feeding > 0) {
332 			dvb->feeding--;
333 			if (dvb->feeding == 0) {
334 				/* Stop transport */
335 				ret = stop_urb_transfer(dev);
336 				au0828_stop_transport(dev, 0);
337 			}
338 		}
339 		mutex_unlock(&dvb->lock);
340 	}
341 
342 	return ret;
343 }
344 
345 static void au0828_restart_dvb_streaming(struct work_struct *work)
346 {
347 	struct au0828_dev *dev = container_of(work, struct au0828_dev,
348 					      restart_streaming);
349 	struct au0828_dvb *dvb = &dev->dvb;
350 
351 	if (!dev->urb_streaming)
352 		return;
353 
354 	dprintk(1, "Restarting streaming...!\n");
355 
356 	mutex_lock(&dvb->lock);
357 
358 	/* Stop transport */
359 	stop_urb_transfer(dev);
360 	au0828_stop_transport(dev, 1);
361 
362 	/* Start transport */
363 	au0828_start_transport(dev);
364 	start_urb_transfer(dev);
365 
366 	mutex_unlock(&dvb->lock);
367 }
368 
369 static int au0828_set_frontend(struct dvb_frontend *fe)
370 {
371 	struct au0828_dev *dev = fe->dvb->priv;
372 	struct au0828_dvb *dvb = &dev->dvb;
373 	int ret, was_streaming;
374 
375 	mutex_lock(&dvb->lock);
376 	was_streaming = dev->urb_streaming;
377 	if (was_streaming) {
378 		au0828_stop_transport(dev, 1);
379 
380 		/*
381 		 * We can't hold a mutex here, as the restart_streaming
382 		 * kthread may also hold it.
383 		 */
384 		mutex_unlock(&dvb->lock);
385 		cancel_work_sync(&dev->restart_streaming);
386 		mutex_lock(&dvb->lock);
387 
388 		stop_urb_transfer(dev);
389 	}
390 	mutex_unlock(&dvb->lock);
391 
392 	ret = dvb->set_frontend(fe);
393 
394 	if (was_streaming) {
395 		mutex_lock(&dvb->lock);
396 		au0828_start_transport(dev);
397 		start_urb_transfer(dev);
398 		mutex_unlock(&dvb->lock);
399 	}
400 
401 	return ret;
402 }
403 
404 static int dvb_register(struct au0828_dev *dev)
405 {
406 	struct au0828_dvb *dvb = &dev->dvb;
407 	int result;
408 
409 	dprintk(1, "%s()\n", __func__);
410 
411 	if (preallocate_big_buffers) {
412 		int i;
413 		for (i = 0; i < URB_COUNT; i++) {
414 			dev->dig_transfer_buffer[i] = kzalloc(URB_BUFSIZE,
415 					GFP_KERNEL);
416 
417 			if (!dev->dig_transfer_buffer[i]) {
418 				result = -ENOMEM;
419 
420 				pr_err("failed buffer allocation (errno = %d)\n",
421 				       result);
422 				goto fail_adapter;
423 			}
424 		}
425 	}
426 
427 	INIT_WORK(&dev->restart_streaming, au0828_restart_dvb_streaming);
428 
429 	/* register adapter */
430 	result = dvb_register_adapter(&dvb->adapter,
431 				      KBUILD_MODNAME, THIS_MODULE,
432 				      &dev->usbdev->dev, adapter_nr);
433 	if (result < 0) {
434 		pr_err("dvb_register_adapter failed (errno = %d)\n",
435 		       result);
436 		goto fail_adapter;
437 	}
438 
439 #ifdef CONFIG_MEDIA_CONTROLLER_DVB
440 	dvb->adapter.mdev = dev->media_dev;
441 #endif
442 
443 	dvb->adapter.priv = dev;
444 
445 	/* register frontend */
446 	result = dvb_register_frontend(&dvb->adapter, dvb->frontend);
447 	if (result < 0) {
448 		pr_err("dvb_register_frontend failed (errno = %d)\n",
449 		       result);
450 		goto fail_frontend;
451 	}
452 
453 	/* Hook dvb frontend */
454 	dvb->set_frontend = dvb->frontend->ops.set_frontend;
455 	dvb->frontend->ops.set_frontend = au0828_set_frontend;
456 
457 	/* register demux stuff */
458 	dvb->demux.dmx.capabilities =
459 		DMX_TS_FILTERING | DMX_SECTION_FILTERING |
460 		DMX_MEMORY_BASED_FILTERING;
461 	dvb->demux.priv       = dev;
462 	dvb->demux.filternum  = 256;
463 	dvb->demux.feednum    = 256;
464 	dvb->demux.start_feed = au0828_dvb_start_feed;
465 	dvb->demux.stop_feed  = au0828_dvb_stop_feed;
466 	result = dvb_dmx_init(&dvb->demux);
467 	if (result < 0) {
468 		pr_err("dvb_dmx_init failed (errno = %d)\n", result);
469 		goto fail_dmx;
470 	}
471 
472 	dvb->dmxdev.filternum    = 256;
473 	dvb->dmxdev.demux        = &dvb->demux.dmx;
474 	dvb->dmxdev.capabilities = 0;
475 	result = dvb_dmxdev_init(&dvb->dmxdev, &dvb->adapter);
476 	if (result < 0) {
477 		pr_err("dvb_dmxdev_init failed (errno = %d)\n", result);
478 		goto fail_dmxdev;
479 	}
480 
481 	dvb->fe_hw.source = DMX_FRONTEND_0;
482 	result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_hw);
483 	if (result < 0) {
484 		pr_err("add_frontend failed (DMX_FRONTEND_0, errno = %d)\n",
485 		       result);
486 		goto fail_fe_hw;
487 	}
488 
489 	dvb->fe_mem.source = DMX_MEMORY_FE;
490 	result = dvb->demux.dmx.add_frontend(&dvb->demux.dmx, &dvb->fe_mem);
491 	if (result < 0) {
492 		pr_err("add_frontend failed (DMX_MEMORY_FE, errno = %d)\n",
493 		       result);
494 		goto fail_fe_mem;
495 	}
496 
497 	result = dvb->demux.dmx.connect_frontend(&dvb->demux.dmx, &dvb->fe_hw);
498 	if (result < 0) {
499 		pr_err("connect_frontend failed (errno = %d)\n", result);
500 		goto fail_fe_conn;
501 	}
502 
503 	/* register network adapter */
504 	dvb_net_init(&dvb->adapter, &dvb->net, &dvb->demux.dmx);
505 
506 	dvb->start_count = 0;
507 	dvb->stop_count = 0;
508 
509 	result = dvb_create_media_graph(&dvb->adapter, false);
510 	if (result < 0)
511 		goto fail_create_graph;
512 
513 	return 0;
514 
515 fail_create_graph:
516 	dvb_net_release(&dvb->net);
517 fail_fe_conn:
518 	dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
519 fail_fe_mem:
520 	dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
521 fail_fe_hw:
522 	dvb_dmxdev_release(&dvb->dmxdev);
523 fail_dmxdev:
524 	dvb_dmx_release(&dvb->demux);
525 fail_dmx:
526 	dvb_unregister_frontend(dvb->frontend);
527 fail_frontend:
528 	dvb_frontend_detach(dvb->frontend);
529 	dvb_unregister_adapter(&dvb->adapter);
530 fail_adapter:
531 
532 	if (preallocate_big_buffers) {
533 		int i;
534 		for (i = 0; i < URB_COUNT; i++)
535 			kfree(dev->dig_transfer_buffer[i]);
536 	}
537 
538 	return result;
539 }
540 
541 void au0828_dvb_unregister(struct au0828_dev *dev)
542 {
543 	struct au0828_dvb *dvb = &dev->dvb;
544 
545 	dprintk(1, "%s()\n", __func__);
546 
547 	if (dvb->frontend == NULL)
548 		return;
549 
550 	cancel_work_sync(&dev->restart_streaming);
551 
552 	dvb_net_release(&dvb->net);
553 	dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_mem);
554 	dvb->demux.dmx.remove_frontend(&dvb->demux.dmx, &dvb->fe_hw);
555 	dvb_dmxdev_release(&dvb->dmxdev);
556 	dvb_dmx_release(&dvb->demux);
557 	dvb_unregister_frontend(dvb->frontend);
558 	dvb_frontend_detach(dvb->frontend);
559 	dvb_unregister_adapter(&dvb->adapter);
560 
561 	if (preallocate_big_buffers) {
562 		int i;
563 		for (i = 0; i < URB_COUNT; i++)
564 			kfree(dev->dig_transfer_buffer[i]);
565 	}
566 	dvb->frontend = NULL;
567 }
568 
569 /* All the DVB attach calls go here, this function get's modified
570  * for each new card. No other function in this file needs
571  * to change.
572  */
573 int au0828_dvb_register(struct au0828_dev *dev)
574 {
575 	struct au0828_dvb *dvb = &dev->dvb;
576 	int ret;
577 
578 	dprintk(1, "%s()\n", __func__);
579 
580 	/* init frontend */
581 	switch (dev->boardnr) {
582 	case AU0828_BOARD_HAUPPAUGE_HVR850:
583 	case AU0828_BOARD_HAUPPAUGE_HVR950Q:
584 		dvb->frontend = dvb_attach(au8522_attach,
585 				&hauppauge_hvr950q_config,
586 				&dev->i2c_adap);
587 		if (dvb->frontend != NULL)
588 			switch (dev->board.tuner_type) {
589 			default:
590 			case TUNER_XC5000:
591 				dvb_attach(xc5000_attach, dvb->frontend,
592 					   &dev->i2c_adap,
593 					   &hauppauge_xc5000a_config);
594 				break;
595 			case TUNER_XC5000C:
596 				dvb_attach(xc5000_attach, dvb->frontend,
597 					   &dev->i2c_adap,
598 					   &hauppauge_xc5000c_config);
599 				break;
600 			}
601 		break;
602 	case AU0828_BOARD_HAUPPAUGE_HVR950Q_MXL:
603 		dvb->frontend = dvb_attach(au8522_attach,
604 				&hauppauge_hvr950q_config,
605 				&dev->i2c_adap);
606 		if (dvb->frontend != NULL)
607 			dvb_attach(mxl5007t_attach, dvb->frontend,
608 				   &dev->i2c_adap, 0x60,
609 				   &mxl5007t_hvr950q_config);
610 		break;
611 	case AU0828_BOARD_HAUPPAUGE_WOODBURY:
612 		dvb->frontend = dvb_attach(au8522_attach,
613 				&hauppauge_woodbury_config,
614 				&dev->i2c_adap);
615 		if (dvb->frontend != NULL)
616 			dvb_attach(tda18271_attach, dvb->frontend,
617 				   0x60, &dev->i2c_adap,
618 				   &hauppauge_woodbury_tunerconfig);
619 		break;
620 	case AU0828_BOARD_DVICO_FUSIONHDTV7:
621 		dvb->frontend = dvb_attach(au8522_attach,
622 				&fusionhdtv7usb_config,
623 				&dev->i2c_adap);
624 		if (dvb->frontend != NULL) {
625 			dvb_attach(xc5000_attach, dvb->frontend,
626 				&dev->i2c_adap,
627 				&hauppauge_xc5000a_config);
628 		}
629 		break;
630 	default:
631 		pr_warn("The frontend of your DVB/ATSC card isn't supported yet\n");
632 		break;
633 	}
634 	if (NULL == dvb->frontend) {
635 		pr_err("%s() Frontend initialization failed\n",
636 		       __func__);
637 		return -1;
638 	}
639 	/* define general-purpose callback pointer */
640 	dvb->frontend->callback = au0828_tuner_callback;
641 
642 	/* register everything */
643 	ret = dvb_register(dev);
644 	if (ret < 0) {
645 		if (dvb->frontend->ops.release)
646 			dvb->frontend->ops.release(dvb->frontend);
647 		dvb->frontend = NULL;
648 		return ret;
649 	}
650 
651 	dev->bulk_timeout.function = au0828_bulk_timeout;
652 	dev->bulk_timeout.data = (unsigned long) dev;
653 	init_timer(&dev->bulk_timeout);
654 
655 	return 0;
656 }
657 
658 void au0828_dvb_suspend(struct au0828_dev *dev)
659 {
660 	struct au0828_dvb *dvb = &dev->dvb;
661 	int rc;
662 
663 	if (dvb->frontend) {
664 		if (dev->urb_streaming) {
665 			cancel_work_sync(&dev->restart_streaming);
666 			/* Stop transport */
667 			mutex_lock(&dvb->lock);
668 			stop_urb_transfer(dev);
669 			au0828_stop_transport(dev, 1);
670 			mutex_unlock(&dvb->lock);
671 			dev->need_urb_start = true;
672 		}
673 		/* suspend frontend - does tuner and fe to sleep */
674 		rc = dvb_frontend_suspend(dvb->frontend);
675 		pr_info("au0828_dvb_suspend(): Suspending DVB fe %d\n", rc);
676 	}
677 }
678 
679 void au0828_dvb_resume(struct au0828_dev *dev)
680 {
681 	struct au0828_dvb *dvb = &dev->dvb;
682 	int rc;
683 
684 	if (dvb->frontend) {
685 		/* resume frontend - does fe and tuner init */
686 		rc = dvb_frontend_resume(dvb->frontend);
687 		pr_info("au0828_dvb_resume(): Resuming DVB fe %d\n", rc);
688 		if (dev->need_urb_start) {
689 			/* Start transport */
690 			mutex_lock(&dvb->lock);
691 			au0828_start_transport(dev);
692 			start_urb_transfer(dev);
693 			mutex_unlock(&dvb->lock);
694 		}
695 	}
696 }
697