1 /* 2 * Driver for the Auvitek USB bridge 3 * 4 * Copyright (c) 2008 Steven Toth <stoth@linuxtv.org> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * 15 * GNU General Public License for more details. 16 */ 17 18 #include "au0828.h" 19 #include "au8522.h" 20 21 #include <linux/module.h> 22 #include <linux/slab.h> 23 #include <linux/videodev2.h> 24 #include <media/v4l2-common.h> 25 #include <linux/mutex.h> 26 27 /* Due to enum tuner_pad_index */ 28 #include <media/tuner.h> 29 30 /* 31 * 1 = General debug messages 32 * 2 = USB handling 33 * 4 = I2C related 34 * 8 = Bridge related 35 * 16 = IR related 36 */ 37 int au0828_debug; 38 module_param_named(debug, au0828_debug, int, 0644); 39 MODULE_PARM_DESC(debug, 40 "set debug bitmask: 1=general, 2=USB, 4=I2C, 8=bridge, 16=IR"); 41 42 static unsigned int disable_usb_speed_check; 43 module_param(disable_usb_speed_check, int, 0444); 44 MODULE_PARM_DESC(disable_usb_speed_check, 45 "override min bandwidth requirement of 480M bps"); 46 47 #define _AU0828_BULKPIPE 0x03 48 #define _BULKPIPESIZE 0xffff 49 50 static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value, 51 u16 index); 52 static int recv_control_msg(struct au0828_dev *dev, u16 request, u32 value, 53 u16 index, unsigned char *cp, u16 size); 54 55 /* USB Direction */ 56 #define CMD_REQUEST_IN 0x00 57 #define CMD_REQUEST_OUT 0x01 58 59 u32 au0828_readreg(struct au0828_dev *dev, u16 reg) 60 { 61 u8 result = 0; 62 63 recv_control_msg(dev, CMD_REQUEST_IN, 0, reg, &result, 1); 64 dprintk(8, "%s(0x%04x) = 0x%02x\n", __func__, reg, result); 65 66 return result; 67 } 68 69 u32 au0828_writereg(struct au0828_dev *dev, u16 reg, u32 val) 70 { 71 dprintk(8, "%s(0x%04x, 0x%02x)\n", __func__, reg, val); 72 return send_control_msg(dev, CMD_REQUEST_OUT, val, reg); 73 } 74 75 static int send_control_msg(struct au0828_dev *dev, u16 request, u32 value, 76 u16 index) 77 { 78 int status = -ENODEV; 79 80 if (dev->usbdev) { 81 82 /* cp must be memory that has been allocated by kmalloc */ 83 status = usb_control_msg(dev->usbdev, 84 usb_sndctrlpipe(dev->usbdev, 0), 85 request, 86 USB_DIR_OUT | USB_TYPE_VENDOR | 87 USB_RECIP_DEVICE, 88 value, index, NULL, 0, 1000); 89 90 status = min(status, 0); 91 92 if (status < 0) { 93 pr_err("%s() Failed sending control message, error %d.\n", 94 __func__, status); 95 } 96 97 } 98 99 return status; 100 } 101 102 static int recv_control_msg(struct au0828_dev *dev, u16 request, u32 value, 103 u16 index, unsigned char *cp, u16 size) 104 { 105 int status = -ENODEV; 106 mutex_lock(&dev->mutex); 107 if (dev->usbdev) { 108 status = usb_control_msg(dev->usbdev, 109 usb_rcvctrlpipe(dev->usbdev, 0), 110 request, 111 USB_DIR_IN | USB_TYPE_VENDOR | USB_RECIP_DEVICE, 112 value, index, 113 dev->ctrlmsg, size, 1000); 114 115 status = min(status, 0); 116 117 if (status < 0) { 118 pr_err("%s() Failed receiving control message, error %d.\n", 119 __func__, status); 120 } 121 122 /* the host controller requires heap allocated memory, which 123 is why we didn't just pass "cp" into usb_control_msg */ 124 memcpy(cp, dev->ctrlmsg, size); 125 } 126 mutex_unlock(&dev->mutex); 127 return status; 128 } 129 130 #ifdef CONFIG_MEDIA_CONTROLLER 131 static void au0828_media_graph_notify(struct media_entity *new, 132 void *notify_data); 133 #endif 134 135 static void au0828_unregister_media_device(struct au0828_dev *dev) 136 { 137 #ifdef CONFIG_MEDIA_CONTROLLER 138 struct media_device *mdev = dev->media_dev; 139 struct media_entity_notify *notify, *nextp; 140 141 if (!mdev || !media_devnode_is_registered(mdev->devnode)) 142 return; 143 144 /* Remove au0828 entity_notify callbacks */ 145 list_for_each_entry_safe(notify, nextp, &mdev->entity_notify, list) { 146 if (notify->notify != au0828_media_graph_notify) 147 continue; 148 media_device_unregister_entity_notify(mdev, notify); 149 } 150 151 /* clear enable_source, disable_source */ 152 mutex_lock(&mdev->graph_mutex); 153 dev->media_dev->source_priv = NULL; 154 dev->media_dev->enable_source = NULL; 155 dev->media_dev->disable_source = NULL; 156 mutex_unlock(&mdev->graph_mutex); 157 158 media_device_unregister(dev->media_dev); 159 media_device_cleanup(dev->media_dev); 160 kfree(dev->media_dev); 161 dev->media_dev = NULL; 162 #endif 163 } 164 165 void au0828_usb_release(struct au0828_dev *dev) 166 { 167 au0828_unregister_media_device(dev); 168 169 /* I2C */ 170 au0828_i2c_unregister(dev); 171 172 kfree(dev); 173 } 174 175 static void au0828_usb_disconnect(struct usb_interface *interface) 176 { 177 struct au0828_dev *dev = usb_get_intfdata(interface); 178 179 dprintk(1, "%s()\n", __func__); 180 181 /* there is a small window after disconnect, before 182 dev->usbdev is NULL, for poll (e.g: IR) try to access 183 the device and fill the dmesg with error messages. 184 Set the status so poll routines can check and avoid 185 access after disconnect. 186 */ 187 set_bit(DEV_DISCONNECTED, &dev->dev_state); 188 189 au0828_rc_unregister(dev); 190 /* Digital TV */ 191 au0828_dvb_unregister(dev); 192 193 usb_set_intfdata(interface, NULL); 194 mutex_lock(&dev->mutex); 195 dev->usbdev = NULL; 196 mutex_unlock(&dev->mutex); 197 if (au0828_analog_unregister(dev)) { 198 /* 199 * No need to call au0828_usb_release() if V4L2 is enabled, 200 * as this is already called via au0828_usb_v4l2_release() 201 */ 202 return; 203 } 204 au0828_usb_release(dev); 205 } 206 207 static int au0828_media_device_init(struct au0828_dev *dev, 208 struct usb_device *udev) 209 { 210 #ifdef CONFIG_MEDIA_CONTROLLER 211 struct media_device *mdev; 212 213 mdev = kzalloc(sizeof(*mdev), GFP_KERNEL); 214 if (!mdev) 215 return -ENOMEM; 216 217 /* check if media device is already initialized */ 218 if (!mdev->dev) 219 media_device_usb_init(mdev, udev, udev->product); 220 221 dev->media_dev = mdev; 222 #endif 223 return 0; 224 } 225 226 #ifdef CONFIG_MEDIA_CONTROLLER 227 static void au0828_media_graph_notify(struct media_entity *new, 228 void *notify_data) 229 { 230 struct au0828_dev *dev = (struct au0828_dev *) notify_data; 231 int ret; 232 struct media_entity *entity, *mixer = NULL, *decoder = NULL; 233 234 if (!new) { 235 /* 236 * Called during au0828 probe time to connect 237 * entites that were created prior to registering 238 * the notify handler. Find mixer and decoder. 239 */ 240 media_device_for_each_entity(entity, dev->media_dev) { 241 if (entity->function == MEDIA_ENT_F_AUDIO_MIXER) 242 mixer = entity; 243 else if (entity->function == MEDIA_ENT_F_ATV_DECODER) 244 decoder = entity; 245 } 246 goto create_link; 247 } 248 249 switch (new->function) { 250 case MEDIA_ENT_F_AUDIO_MIXER: 251 mixer = new; 252 if (dev->decoder) 253 decoder = dev->decoder; 254 break; 255 case MEDIA_ENT_F_ATV_DECODER: 256 /* In case, Mixer is added first, find mixer and create link */ 257 media_device_for_each_entity(entity, dev->media_dev) { 258 if (entity->function == MEDIA_ENT_F_AUDIO_MIXER) 259 mixer = entity; 260 } 261 decoder = new; 262 break; 263 default: 264 break; 265 } 266 267 create_link: 268 if (decoder && mixer) { 269 ret = media_create_pad_link(decoder, 270 DEMOD_PAD_AUDIO_OUT, 271 mixer, 0, 272 MEDIA_LNK_FL_ENABLED); 273 if (ret) 274 dev_err(&dev->usbdev->dev, 275 "Mixer Pad Link Create Error: %d\n", ret); 276 } 277 } 278 279 /* Callers should hold graph_mutex */ 280 static int au0828_enable_source(struct media_entity *entity, 281 struct media_pipeline *pipe) 282 { 283 struct media_entity *source, *find_source; 284 struct media_entity *sink; 285 struct media_link *link, *found_link = NULL; 286 int ret = 0; 287 struct media_device *mdev = entity->graph_obj.mdev; 288 struct au0828_dev *dev; 289 290 if (!mdev) 291 return -ENODEV; 292 293 dev = mdev->source_priv; 294 295 /* 296 * For Audio and V4L2 entity, find the link to which decoder 297 * is the sink. Look for an active link between decoder and 298 * source (tuner/s-video/Composite), if one exists, nothing 299 * to do. If not, look for any active links between source 300 * and any other entity. If one exists, source is busy. If 301 * source is free, setup link and start pipeline from source. 302 * For DVB FE entity, the source for the link is the tuner. 303 * Check if tuner is available and setup link and start 304 * pipeline. 305 */ 306 if (entity->function == MEDIA_ENT_F_DTV_DEMOD) { 307 sink = entity; 308 find_source = dev->tuner; 309 } else { 310 /* Analog isn't configured or register failed */ 311 if (!dev->decoder) { 312 ret = -ENODEV; 313 goto end; 314 } 315 316 sink = dev->decoder; 317 318 /* 319 * Default input is tuner and default input_type 320 * is AU0828_VMUX_TELEVISION. 321 * FIXME: 322 * There is a problem when s_input is called to 323 * change the default input. s_input will try to 324 * enable_source before attempting to change the 325 * input on the device, and will end up enabling 326 * default source which is tuner. 327 * 328 * Additional logic is necessary in au0828 329 * to detect that the input has changed and 330 * enable the right source. 331 */ 332 333 if (dev->input_type == AU0828_VMUX_TELEVISION) 334 find_source = dev->tuner; 335 else if (dev->input_type == AU0828_VMUX_SVIDEO || 336 dev->input_type == AU0828_VMUX_COMPOSITE) 337 find_source = &dev->input_ent[dev->input_type]; 338 else { 339 /* unknown input - let user select input */ 340 ret = 0; 341 goto end; 342 } 343 } 344 345 /* Is an active link between sink and source */ 346 if (dev->active_link) { 347 /* 348 * If DVB is using the tuner and calling entity is 349 * audio/video, the following check will be false, 350 * since sink is different. Result is Busy. 351 */ 352 if (dev->active_link->sink->entity == sink && 353 dev->active_link->source->entity == find_source) { 354 /* 355 * Either ALSA or Video own tuner. sink is 356 * the same for both. Prevent Video stepping 357 * on ALSA when ALSA owns the source. 358 */ 359 if (dev->active_link_owner != entity && 360 dev->active_link_owner->function == 361 MEDIA_ENT_F_AUDIO_CAPTURE) { 362 pr_debug("ALSA has the tuner\n"); 363 ret = -EBUSY; 364 goto end; 365 } 366 ret = 0; 367 goto end; 368 } else { 369 ret = -EBUSY; 370 goto end; 371 } 372 } 373 374 list_for_each_entry(link, &sink->links, list) { 375 /* Check sink, and source */ 376 if (link->sink->entity == sink && 377 link->source->entity == find_source) { 378 found_link = link; 379 break; 380 } 381 } 382 383 if (!found_link) { 384 ret = -ENODEV; 385 goto end; 386 } 387 388 /* activate link between source and sink and start pipeline */ 389 source = found_link->source->entity; 390 ret = __media_entity_setup_link(found_link, MEDIA_LNK_FL_ENABLED); 391 if (ret) { 392 pr_err("Activate tuner link %s->%s. Error %d\n", 393 source->name, sink->name, ret); 394 goto end; 395 } 396 397 ret = __media_pipeline_start(entity, pipe); 398 if (ret) { 399 pr_err("Start Pipeline: %s->%s Error %d\n", 400 source->name, entity->name, ret); 401 ret = __media_entity_setup_link(found_link, 0); 402 pr_err("Deactivate link Error %d\n", ret); 403 goto end; 404 } 405 /* 406 * save active link and active link owner to avoid audio 407 * deactivating video owned link from disable_source and 408 * vice versa 409 */ 410 dev->active_link = found_link; 411 dev->active_link_owner = entity; 412 dev->active_source = source; 413 dev->active_sink = sink; 414 415 pr_debug("Enabled Source: %s->%s->%s Ret %d\n", 416 dev->active_source->name, dev->active_sink->name, 417 dev->active_link_owner->name, ret); 418 end: 419 pr_debug("au0828_enable_source() end %s %d %d\n", 420 entity->name, entity->function, ret); 421 return ret; 422 } 423 424 /* Callers should hold graph_mutex */ 425 static void au0828_disable_source(struct media_entity *entity) 426 { 427 int ret = 0; 428 struct media_device *mdev = entity->graph_obj.mdev; 429 struct au0828_dev *dev; 430 431 if (!mdev) 432 return; 433 434 dev = mdev->source_priv; 435 436 if (!dev->active_link) 437 return; 438 439 /* link is active - stop pipeline from source (tuner) */ 440 if (dev->active_link->sink->entity == dev->active_sink && 441 dev->active_link->source->entity == dev->active_source) { 442 /* 443 * prevent video from deactivating link when audio 444 * has active pipeline 445 */ 446 if (dev->active_link_owner != entity) 447 return; 448 __media_pipeline_stop(entity); 449 ret = __media_entity_setup_link(dev->active_link, 0); 450 if (ret) 451 pr_err("Deactivate link Error %d\n", ret); 452 453 pr_debug("Disabled Source: %s->%s->%s Ret %d\n", 454 dev->active_source->name, dev->active_sink->name, 455 dev->active_link_owner->name, ret); 456 457 dev->active_link = NULL; 458 dev->active_link_owner = NULL; 459 dev->active_source = NULL; 460 dev->active_sink = NULL; 461 } 462 } 463 #endif 464 465 static int au0828_media_device_register(struct au0828_dev *dev, 466 struct usb_device *udev) 467 { 468 #ifdef CONFIG_MEDIA_CONTROLLER 469 int ret; 470 struct media_entity *entity, *demod = NULL; 471 struct media_link *link; 472 473 if (!dev->media_dev) 474 return 0; 475 476 if (!media_devnode_is_registered(dev->media_dev->devnode)) { 477 478 /* register media device */ 479 ret = media_device_register(dev->media_dev); 480 if (ret) { 481 dev_err(&udev->dev, 482 "Media Device Register Error: %d\n", ret); 483 return ret; 484 } 485 } else { 486 /* 487 * Call au0828_media_graph_notify() to connect 488 * audio graph to our graph. In this case, audio 489 * driver registered the device and there is no 490 * entity_notify to be called when new entities 491 * are added. Invoke it now. 492 */ 493 au0828_media_graph_notify(NULL, (void *) dev); 494 } 495 496 /* 497 * Find tuner, decoder and demod. 498 * 499 * The tuner and decoder should be cached, as they'll be used by 500 * au0828_enable_source. 501 * 502 * It also needs to disable the link between tuner and 503 * decoder/demod, to avoid disable step when tuner is requested 504 * by video or audio. Note that this step can't be done until dvb 505 * graph is created during dvb register. 506 */ 507 media_device_for_each_entity(entity, dev->media_dev) { 508 switch (entity->function) { 509 case MEDIA_ENT_F_TUNER: 510 dev->tuner = entity; 511 break; 512 case MEDIA_ENT_F_ATV_DECODER: 513 dev->decoder = entity; 514 break; 515 case MEDIA_ENT_F_DTV_DEMOD: 516 demod = entity; 517 break; 518 } 519 } 520 521 /* Disable link between tuner->demod and/or tuner->decoder */ 522 if (dev->tuner) { 523 list_for_each_entry(link, &dev->tuner->links, list) { 524 if (demod && link->sink->entity == demod) 525 media_entity_setup_link(link, 0); 526 if (dev->decoder && link->sink->entity == dev->decoder) 527 media_entity_setup_link(link, 0); 528 } 529 } 530 531 /* register entity_notify callback */ 532 dev->entity_notify.notify_data = (void *) dev; 533 dev->entity_notify.notify = (void *) au0828_media_graph_notify; 534 ret = media_device_register_entity_notify(dev->media_dev, 535 &dev->entity_notify); 536 if (ret) { 537 dev_err(&udev->dev, 538 "Media Device register entity_notify Error: %d\n", 539 ret); 540 return ret; 541 } 542 /* set enable_source */ 543 mutex_lock(&dev->media_dev->graph_mutex); 544 dev->media_dev->source_priv = (void *) dev; 545 dev->media_dev->enable_source = au0828_enable_source; 546 dev->media_dev->disable_source = au0828_disable_source; 547 mutex_unlock(&dev->media_dev->graph_mutex); 548 #endif 549 return 0; 550 } 551 552 static int au0828_usb_probe(struct usb_interface *interface, 553 const struct usb_device_id *id) 554 { 555 int ifnum; 556 int retval = 0; 557 558 struct au0828_dev *dev; 559 struct usb_device *usbdev = interface_to_usbdev(interface); 560 561 ifnum = interface->altsetting->desc.bInterfaceNumber; 562 563 if (ifnum != 0) 564 return -ENODEV; 565 566 dprintk(1, "%s() vendor id 0x%x device id 0x%x ifnum:%d\n", __func__, 567 le16_to_cpu(usbdev->descriptor.idVendor), 568 le16_to_cpu(usbdev->descriptor.idProduct), 569 ifnum); 570 571 /* 572 * Make sure we have 480 Mbps of bandwidth, otherwise things like 573 * video stream wouldn't likely work, since 12 Mbps is generally 574 * not enough even for most Digital TV streams. 575 */ 576 if (usbdev->speed != USB_SPEED_HIGH && disable_usb_speed_check == 0) { 577 pr_err("au0828: Device initialization failed.\n"); 578 pr_err("au0828: Device must be connected to a high-speed USB 2.0 port.\n"); 579 return -ENODEV; 580 } 581 582 dev = kzalloc(sizeof(*dev), GFP_KERNEL); 583 if (dev == NULL) { 584 pr_err("%s() Unable to allocate memory\n", __func__); 585 return -ENOMEM; 586 } 587 588 mutex_init(&dev->lock); 589 mutex_lock(&dev->lock); 590 mutex_init(&dev->mutex); 591 mutex_init(&dev->dvb.lock); 592 dev->usbdev = usbdev; 593 dev->boardnr = id->driver_info; 594 dev->board = au0828_boards[dev->boardnr]; 595 596 /* Initialize the media controller */ 597 retval = au0828_media_device_init(dev, usbdev); 598 if (retval) { 599 pr_err("%s() au0828_media_device_init failed\n", 600 __func__); 601 mutex_unlock(&dev->lock); 602 kfree(dev); 603 return retval; 604 } 605 606 retval = au0828_v4l2_device_register(interface, dev); 607 if (retval) { 608 au0828_usb_v4l2_media_release(dev); 609 mutex_unlock(&dev->lock); 610 kfree(dev); 611 return retval; 612 } 613 614 /* Power Up the bridge */ 615 au0828_write(dev, REG_600, 1 << 4); 616 617 /* Bring up the GPIO's and supporting devices */ 618 au0828_gpio_setup(dev); 619 620 /* I2C */ 621 au0828_i2c_register(dev); 622 623 /* Setup */ 624 au0828_card_setup(dev); 625 626 /* Analog TV */ 627 retval = au0828_analog_register(dev, interface); 628 if (retval) { 629 pr_err("%s() au0282_dev_register failed to register on V4L2\n", 630 __func__); 631 mutex_unlock(&dev->lock); 632 kfree(dev); 633 goto done; 634 } 635 636 /* Digital TV */ 637 retval = au0828_dvb_register(dev); 638 if (retval) 639 pr_err("%s() au0282_dev_register failed\n", 640 __func__); 641 642 /* Remote controller */ 643 au0828_rc_register(dev); 644 645 /* 646 * Store the pointer to the au0828_dev so it can be accessed in 647 * au0828_usb_disconnect 648 */ 649 usb_set_intfdata(interface, dev); 650 651 pr_info("Registered device AU0828 [%s]\n", 652 dev->board.name == NULL ? "Unset" : dev->board.name); 653 654 mutex_unlock(&dev->lock); 655 656 retval = au0828_media_device_register(dev, usbdev); 657 658 done: 659 if (retval < 0) 660 au0828_usb_disconnect(interface); 661 662 return retval; 663 } 664 665 static int au0828_suspend(struct usb_interface *interface, 666 pm_message_t message) 667 { 668 struct au0828_dev *dev = usb_get_intfdata(interface); 669 670 if (!dev) 671 return 0; 672 673 pr_info("Suspend\n"); 674 675 au0828_rc_suspend(dev); 676 au0828_v4l2_suspend(dev); 677 au0828_dvb_suspend(dev); 678 679 /* FIXME: should suspend also ATV/DTV */ 680 681 return 0; 682 } 683 684 static int au0828_resume(struct usb_interface *interface) 685 { 686 struct au0828_dev *dev = usb_get_intfdata(interface); 687 if (!dev) 688 return 0; 689 690 pr_info("Resume\n"); 691 692 /* Power Up the bridge */ 693 au0828_write(dev, REG_600, 1 << 4); 694 695 /* Bring up the GPIO's and supporting devices */ 696 au0828_gpio_setup(dev); 697 698 au0828_rc_resume(dev); 699 au0828_v4l2_resume(dev); 700 au0828_dvb_resume(dev); 701 702 /* FIXME: should resume also ATV/DTV */ 703 704 return 0; 705 } 706 707 static struct usb_driver au0828_usb_driver = { 708 .name = KBUILD_MODNAME, 709 .probe = au0828_usb_probe, 710 .disconnect = au0828_usb_disconnect, 711 .id_table = au0828_usb_id_table, 712 .suspend = au0828_suspend, 713 .resume = au0828_resume, 714 .reset_resume = au0828_resume, 715 }; 716 717 static int __init au0828_init(void) 718 { 719 int ret; 720 721 if (au0828_debug & 1) 722 pr_info("%s() Debugging is enabled\n", __func__); 723 724 if (au0828_debug & 2) 725 pr_info("%s() USB Debugging is enabled\n", __func__); 726 727 if (au0828_debug & 4) 728 pr_info("%s() I2C Debugging is enabled\n", __func__); 729 730 if (au0828_debug & 8) 731 pr_info("%s() Bridge Debugging is enabled\n", 732 __func__); 733 734 if (au0828_debug & 16) 735 pr_info("%s() IR Debugging is enabled\n", 736 __func__); 737 738 pr_info("au0828 driver loaded\n"); 739 740 ret = usb_register(&au0828_usb_driver); 741 if (ret) 742 pr_err("usb_register failed, error = %d\n", ret); 743 744 return ret; 745 } 746 747 static void __exit au0828_exit(void) 748 { 749 usb_deregister(&au0828_usb_driver); 750 } 751 752 module_init(au0828_init); 753 module_exit(au0828_exit); 754 755 MODULE_DESCRIPTION("Driver for Auvitek AU0828 based products"); 756 MODULE_AUTHOR("Steven Toth <stoth@linuxtv.org>"); 757 MODULE_LICENSE("GPL"); 758 MODULE_VERSION("0.0.3"); 759