1 /* 2 * Driver for mt2063 Micronas tuner 3 * 4 * Copyright (c) 2011 Mauro Carvalho Chehab 5 * 6 * This driver came from a driver originally written by: 7 * Henry Wang <Henry.wang@AzureWave.com> 8 * Made publicly available by Terratec, at: 9 * http://linux.terratec.de/files/TERRATEC_H7/20110323_TERRATEC_H7_Linux.tar.gz 10 * The original driver's license is GPL, as declared with MODULE_LICENSE() 11 * 12 * This program is free software; you can redistribute it and/or modify 13 * it under the terms of the GNU General Public License as published by 14 * the Free Software Foundation under version 2 of the License. 15 * 16 * This program is distributed in the hope that it will be useful, 17 * but WITHOUT ANY WARRANTY; without even the implied warranty of 18 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 19 * GNU General Public License for more details. 20 */ 21 22 #include <linux/init.h> 23 #include <linux/kernel.h> 24 #include <linux/module.h> 25 #include <linux/string.h> 26 #include <linux/videodev2.h> 27 #include <linux/gcd.h> 28 29 #include "mt2063.h" 30 31 static unsigned int debug; 32 module_param(debug, int, 0644); 33 MODULE_PARM_DESC(debug, "Set Verbosity level"); 34 35 #define dprintk(level, fmt, arg...) do { \ 36 if (debug >= level) \ 37 printk(KERN_DEBUG "mt2063 %s: " fmt, __func__, ## arg); \ 38 } while (0) 39 40 41 /* positive error codes used internally */ 42 43 /* Info: Unavoidable LO-related spur may be present in the output */ 44 #define MT2063_SPUR_PRESENT_ERR (0x00800000) 45 46 /* Info: Mask of bits used for # of LO-related spurs that were avoided during tuning */ 47 #define MT2063_SPUR_CNT_MASK (0x001f0000) 48 #define MT2063_SPUR_SHIFT (16) 49 50 /* Info: Upconverter frequency is out of range (may be reason for MT_UPC_UNLOCK) */ 51 #define MT2063_UPC_RANGE (0x04000000) 52 53 /* Info: Downconverter frequency is out of range (may be reason for MT_DPC_UNLOCK) */ 54 #define MT2063_DNC_RANGE (0x08000000) 55 56 /* 57 * Constant defining the version of the following structure 58 * and therefore the API for this code. 59 * 60 * When compiling the tuner driver, the preprocessor will 61 * check against this version number to make sure that 62 * it matches the version that the tuner driver knows about. 63 */ 64 65 /* DECT Frequency Avoidance */ 66 #define MT2063_DECT_AVOID_US_FREQS 0x00000001 67 68 #define MT2063_DECT_AVOID_EURO_FREQS 0x00000002 69 70 #define MT2063_EXCLUDE_US_DECT_FREQUENCIES(s) (((s) & MT2063_DECT_AVOID_US_FREQS) != 0) 71 72 #define MT2063_EXCLUDE_EURO_DECT_FREQUENCIES(s) (((s) & MT2063_DECT_AVOID_EURO_FREQS) != 0) 73 74 enum MT2063_DECT_Avoid_Type { 75 MT2063_NO_DECT_AVOIDANCE = 0, /* Do not create DECT exclusion zones. */ 76 MT2063_AVOID_US_DECT = MT2063_DECT_AVOID_US_FREQS, /* Avoid US DECT frequencies. */ 77 MT2063_AVOID_EURO_DECT = MT2063_DECT_AVOID_EURO_FREQS, /* Avoid European DECT frequencies. */ 78 MT2063_AVOID_BOTH /* Avoid both regions. Not typically used. */ 79 }; 80 81 #define MT2063_MAX_ZONES 48 82 83 struct MT2063_ExclZone_t { 84 u32 min_; 85 u32 max_; 86 struct MT2063_ExclZone_t *next_; 87 }; 88 89 /* 90 * Structure of data needed for Spur Avoidance 91 */ 92 struct MT2063_AvoidSpursData_t { 93 u32 f_ref; 94 u32 f_in; 95 u32 f_LO1; 96 u32 f_if1_Center; 97 u32 f_if1_Request; 98 u32 f_if1_bw; 99 u32 f_LO2; 100 u32 f_out; 101 u32 f_out_bw; 102 u32 f_LO1_Step; 103 u32 f_LO2_Step; 104 u32 f_LO1_FracN_Avoid; 105 u32 f_LO2_FracN_Avoid; 106 u32 f_zif_bw; 107 u32 f_min_LO_Separation; 108 u32 maxH1; 109 u32 maxH2; 110 enum MT2063_DECT_Avoid_Type avoidDECT; 111 u32 bSpurPresent; 112 u32 bSpurAvoided; 113 u32 nSpursFound; 114 u32 nZones; 115 struct MT2063_ExclZone_t *freeZones; 116 struct MT2063_ExclZone_t *usedZones; 117 struct MT2063_ExclZone_t MT2063_ExclZones[MT2063_MAX_ZONES]; 118 }; 119 120 /* 121 * Parameter for function MT2063_SetPowerMask that specifies the power down 122 * of various sections of the MT2063. 123 */ 124 enum MT2063_Mask_Bits { 125 MT2063_REG_SD = 0x0040, /* Shutdown regulator */ 126 MT2063_SRO_SD = 0x0020, /* Shutdown SRO */ 127 MT2063_AFC_SD = 0x0010, /* Shutdown AFC A/D */ 128 MT2063_PD_SD = 0x0002, /* Enable power detector shutdown */ 129 MT2063_PDADC_SD = 0x0001, /* Enable power detector A/D shutdown */ 130 MT2063_VCO_SD = 0x8000, /* Enable VCO shutdown */ 131 MT2063_LTX_SD = 0x4000, /* Enable LTX shutdown */ 132 MT2063_LT1_SD = 0x2000, /* Enable LT1 shutdown */ 133 MT2063_LNA_SD = 0x1000, /* Enable LNA shutdown */ 134 MT2063_UPC_SD = 0x0800, /* Enable upconverter shutdown */ 135 MT2063_DNC_SD = 0x0400, /* Enable downconverter shutdown */ 136 MT2063_VGA_SD = 0x0200, /* Enable VGA shutdown */ 137 MT2063_AMP_SD = 0x0100, /* Enable AMP shutdown */ 138 MT2063_ALL_SD = 0xFF73, /* All shutdown bits for this tuner */ 139 MT2063_NONE_SD = 0x0000 /* No shutdown bits */ 140 }; 141 142 /* 143 * Possible values for MT2063_DNC_OUTPUT 144 */ 145 enum MT2063_DNC_Output_Enable { 146 MT2063_DNC_NONE = 0, 147 MT2063_DNC_1, 148 MT2063_DNC_2, 149 MT2063_DNC_BOTH 150 }; 151 152 /* 153 * Two-wire serial bus subaddresses of the tuner registers. 154 * Also known as the tuner's register addresses. 155 */ 156 enum MT2063_Register_Offsets { 157 MT2063_REG_PART_REV = 0, /* 0x00: Part/Rev Code */ 158 MT2063_REG_LO1CQ_1, /* 0x01: LO1C Queued Byte 1 */ 159 MT2063_REG_LO1CQ_2, /* 0x02: LO1C Queued Byte 2 */ 160 MT2063_REG_LO2CQ_1, /* 0x03: LO2C Queued Byte 1 */ 161 MT2063_REG_LO2CQ_2, /* 0x04: LO2C Queued Byte 2 */ 162 MT2063_REG_LO2CQ_3, /* 0x05: LO2C Queued Byte 3 */ 163 MT2063_REG_RSVD_06, /* 0x06: Reserved */ 164 MT2063_REG_LO_STATUS, /* 0x07: LO Status */ 165 MT2063_REG_FIFFC, /* 0x08: FIFF Center */ 166 MT2063_REG_CLEARTUNE, /* 0x09: ClearTune Filter */ 167 MT2063_REG_ADC_OUT, /* 0x0A: ADC_OUT */ 168 MT2063_REG_LO1C_1, /* 0x0B: LO1C Byte 1 */ 169 MT2063_REG_LO1C_2, /* 0x0C: LO1C Byte 2 */ 170 MT2063_REG_LO2C_1, /* 0x0D: LO2C Byte 1 */ 171 MT2063_REG_LO2C_2, /* 0x0E: LO2C Byte 2 */ 172 MT2063_REG_LO2C_3, /* 0x0F: LO2C Byte 3 */ 173 MT2063_REG_RSVD_10, /* 0x10: Reserved */ 174 MT2063_REG_PWR_1, /* 0x11: PWR Byte 1 */ 175 MT2063_REG_PWR_2, /* 0x12: PWR Byte 2 */ 176 MT2063_REG_TEMP_STATUS, /* 0x13: Temp Status */ 177 MT2063_REG_XO_STATUS, /* 0x14: Crystal Status */ 178 MT2063_REG_RF_STATUS, /* 0x15: RF Attn Status */ 179 MT2063_REG_FIF_STATUS, /* 0x16: FIF Attn Status */ 180 MT2063_REG_LNA_OV, /* 0x17: LNA Attn Override */ 181 MT2063_REG_RF_OV, /* 0x18: RF Attn Override */ 182 MT2063_REG_FIF_OV, /* 0x19: FIF Attn Override */ 183 MT2063_REG_LNA_TGT, /* 0x1A: Reserved */ 184 MT2063_REG_PD1_TGT, /* 0x1B: Pwr Det 1 Target */ 185 MT2063_REG_PD2_TGT, /* 0x1C: Pwr Det 2 Target */ 186 MT2063_REG_RSVD_1D, /* 0x1D: Reserved */ 187 MT2063_REG_RSVD_1E, /* 0x1E: Reserved */ 188 MT2063_REG_RSVD_1F, /* 0x1F: Reserved */ 189 MT2063_REG_RSVD_20, /* 0x20: Reserved */ 190 MT2063_REG_BYP_CTRL, /* 0x21: Bypass Control */ 191 MT2063_REG_RSVD_22, /* 0x22: Reserved */ 192 MT2063_REG_RSVD_23, /* 0x23: Reserved */ 193 MT2063_REG_RSVD_24, /* 0x24: Reserved */ 194 MT2063_REG_RSVD_25, /* 0x25: Reserved */ 195 MT2063_REG_RSVD_26, /* 0x26: Reserved */ 196 MT2063_REG_RSVD_27, /* 0x27: Reserved */ 197 MT2063_REG_FIFF_CTRL, /* 0x28: FIFF Control */ 198 MT2063_REG_FIFF_OFFSET, /* 0x29: FIFF Offset */ 199 MT2063_REG_CTUNE_CTRL, /* 0x2A: Reserved */ 200 MT2063_REG_CTUNE_OV, /* 0x2B: Reserved */ 201 MT2063_REG_CTRL_2C, /* 0x2C: Reserved */ 202 MT2063_REG_FIFF_CTRL2, /* 0x2D: Fiff Control */ 203 MT2063_REG_RSVD_2E, /* 0x2E: Reserved */ 204 MT2063_REG_DNC_GAIN, /* 0x2F: DNC Control */ 205 MT2063_REG_VGA_GAIN, /* 0x30: VGA Gain Ctrl */ 206 MT2063_REG_RSVD_31, /* 0x31: Reserved */ 207 MT2063_REG_TEMP_SEL, /* 0x32: Temperature Selection */ 208 MT2063_REG_RSVD_33, /* 0x33: Reserved */ 209 MT2063_REG_RSVD_34, /* 0x34: Reserved */ 210 MT2063_REG_RSVD_35, /* 0x35: Reserved */ 211 MT2063_REG_RSVD_36, /* 0x36: Reserved */ 212 MT2063_REG_RSVD_37, /* 0x37: Reserved */ 213 MT2063_REG_RSVD_38, /* 0x38: Reserved */ 214 MT2063_REG_RSVD_39, /* 0x39: Reserved */ 215 MT2063_REG_RSVD_3A, /* 0x3A: Reserved */ 216 MT2063_REG_RSVD_3B, /* 0x3B: Reserved */ 217 MT2063_REG_RSVD_3C, /* 0x3C: Reserved */ 218 MT2063_REG_END_REGS 219 }; 220 221 struct mt2063_state { 222 struct i2c_adapter *i2c; 223 224 bool init; 225 226 const struct mt2063_config *config; 227 struct dvb_tuner_ops ops; 228 struct dvb_frontend *frontend; 229 230 u32 frequency; 231 u32 srate; 232 u32 bandwidth; 233 u32 reference; 234 235 u32 tuner_id; 236 struct MT2063_AvoidSpursData_t AS_Data; 237 u32 f_IF1_actual; 238 u32 rcvr_mode; 239 u32 ctfilt_sw; 240 u32 CTFiltMax[31]; 241 u32 num_regs; 242 u8 reg[MT2063_REG_END_REGS]; 243 }; 244 245 /* 246 * mt2063_write - Write data into the I2C bus 247 */ 248 static int mt2063_write(struct mt2063_state *state, u8 reg, u8 *data, u32 len) 249 { 250 struct dvb_frontend *fe = state->frontend; 251 int ret; 252 u8 buf[60]; 253 struct i2c_msg msg = { 254 .addr = state->config->tuner_address, 255 .flags = 0, 256 .buf = buf, 257 .len = len + 1 258 }; 259 260 dprintk(2, "\n"); 261 262 msg.buf[0] = reg; 263 memcpy(msg.buf + 1, data, len); 264 265 if (fe->ops.i2c_gate_ctrl) 266 fe->ops.i2c_gate_ctrl(fe, 1); 267 ret = i2c_transfer(state->i2c, &msg, 1); 268 if (fe->ops.i2c_gate_ctrl) 269 fe->ops.i2c_gate_ctrl(fe, 0); 270 271 if (ret < 0) 272 printk(KERN_ERR "%s error ret=%d\n", __func__, ret); 273 274 return ret; 275 } 276 277 /* 278 * mt2063_write - Write register data into the I2C bus, caching the value 279 */ 280 static int mt2063_setreg(struct mt2063_state *state, u8 reg, u8 val) 281 { 282 int status; 283 284 dprintk(2, "\n"); 285 286 if (reg >= MT2063_REG_END_REGS) 287 return -ERANGE; 288 289 status = mt2063_write(state, reg, &val, 1); 290 if (status < 0) 291 return status; 292 293 state->reg[reg] = val; 294 295 return 0; 296 } 297 298 /* 299 * mt2063_read - Read data from the I2C bus 300 */ 301 static int mt2063_read(struct mt2063_state *state, 302 u8 subAddress, u8 *pData, u32 cnt) 303 { 304 int status = 0; /* Status to be returned */ 305 struct dvb_frontend *fe = state->frontend; 306 u32 i = 0; 307 308 dprintk(2, "addr 0x%02x, cnt %d\n", subAddress, cnt); 309 310 if (fe->ops.i2c_gate_ctrl) 311 fe->ops.i2c_gate_ctrl(fe, 1); 312 313 for (i = 0; i < cnt; i++) { 314 u8 b0[] = { subAddress + i }; 315 struct i2c_msg msg[] = { 316 { 317 .addr = state->config->tuner_address, 318 .flags = 0, 319 .buf = b0, 320 .len = 1 321 }, { 322 .addr = state->config->tuner_address, 323 .flags = I2C_M_RD, 324 .buf = pData + i, 325 .len = 1 326 } 327 }; 328 329 status = i2c_transfer(state->i2c, msg, 2); 330 dprintk(2, "addr 0x%02x, ret = %d, val = 0x%02x\n", 331 subAddress + i, status, *(pData + i)); 332 if (status < 0) 333 break; 334 } 335 if (fe->ops.i2c_gate_ctrl) 336 fe->ops.i2c_gate_ctrl(fe, 0); 337 338 if (status < 0) 339 printk(KERN_ERR "Can't read from address 0x%02x,\n", 340 subAddress + i); 341 342 return status; 343 } 344 345 /* 346 * FIXME: Is this really needed? 347 */ 348 static int MT2063_Sleep(struct dvb_frontend *fe) 349 { 350 /* 351 * ToDo: Add code here to implement a OS blocking 352 */ 353 msleep(100); 354 355 return 0; 356 } 357 358 /* 359 * Microtune spur avoidance 360 */ 361 362 /* Implement ceiling, floor functions. */ 363 #define ceil(n, d) (((n) < 0) ? (-((-(n))/(d))) : (n)/(d) + ((n)%(d) != 0)) 364 #define floor(n, d) (((n) < 0) ? (-((-(n))/(d))) - ((n)%(d) != 0) : (n)/(d)) 365 366 struct MT2063_FIFZone_t { 367 s32 min_; 368 s32 max_; 369 }; 370 371 static struct MT2063_ExclZone_t *InsertNode(struct MT2063_AvoidSpursData_t 372 *pAS_Info, 373 struct MT2063_ExclZone_t *pPrevNode) 374 { 375 struct MT2063_ExclZone_t *pNode; 376 377 dprintk(2, "\n"); 378 379 /* Check for a node in the free list */ 380 if (pAS_Info->freeZones != NULL) { 381 /* Use one from the free list */ 382 pNode = pAS_Info->freeZones; 383 pAS_Info->freeZones = pNode->next_; 384 } else { 385 /* Grab a node from the array */ 386 pNode = &pAS_Info->MT2063_ExclZones[pAS_Info->nZones]; 387 } 388 389 if (pPrevNode != NULL) { 390 pNode->next_ = pPrevNode->next_; 391 pPrevNode->next_ = pNode; 392 } else { /* insert at the beginning of the list */ 393 394 pNode->next_ = pAS_Info->usedZones; 395 pAS_Info->usedZones = pNode; 396 } 397 398 pAS_Info->nZones++; 399 return pNode; 400 } 401 402 static struct MT2063_ExclZone_t *RemoveNode(struct MT2063_AvoidSpursData_t 403 *pAS_Info, 404 struct MT2063_ExclZone_t *pPrevNode, 405 struct MT2063_ExclZone_t 406 *pNodeToRemove) 407 { 408 struct MT2063_ExclZone_t *pNext = pNodeToRemove->next_; 409 410 dprintk(2, "\n"); 411 412 /* Make previous node point to the subsequent node */ 413 if (pPrevNode != NULL) 414 pPrevNode->next_ = pNext; 415 416 /* Add pNodeToRemove to the beginning of the freeZones */ 417 pNodeToRemove->next_ = pAS_Info->freeZones; 418 pAS_Info->freeZones = pNodeToRemove; 419 420 /* Decrement node count */ 421 pAS_Info->nZones--; 422 423 return pNext; 424 } 425 426 /* 427 * MT_AddExclZone() 428 * 429 * Add (and merge) an exclusion zone into the list. 430 * If the range (f_min, f_max) is totally outside the 431 * 1st IF BW, ignore the entry. 432 * If the range (f_min, f_max) is negative, ignore the entry. 433 */ 434 static void MT2063_AddExclZone(struct MT2063_AvoidSpursData_t *pAS_Info, 435 u32 f_min, u32 f_max) 436 { 437 struct MT2063_ExclZone_t *pNode = pAS_Info->usedZones; 438 struct MT2063_ExclZone_t *pPrev = NULL; 439 struct MT2063_ExclZone_t *pNext = NULL; 440 441 dprintk(2, "\n"); 442 443 /* Check to see if this overlaps the 1st IF filter */ 444 if ((f_max > (pAS_Info->f_if1_Center - (pAS_Info->f_if1_bw / 2))) 445 && (f_min < (pAS_Info->f_if1_Center + (pAS_Info->f_if1_bw / 2))) 446 && (f_min < f_max)) { 447 /* 448 * 1 2 3 4 5 6 449 * 450 * New entry: |---| |--| |--| |-| |---| |--| 451 * or or or or or 452 * Existing: |--| |--| |--| |---| |-| |--| 453 */ 454 455 /* Check for our place in the list */ 456 while ((pNode != NULL) && (pNode->max_ < f_min)) { 457 pPrev = pNode; 458 pNode = pNode->next_; 459 } 460 461 if ((pNode != NULL) && (pNode->min_ < f_max)) { 462 /* Combine me with pNode */ 463 if (f_min < pNode->min_) 464 pNode->min_ = f_min; 465 if (f_max > pNode->max_) 466 pNode->max_ = f_max; 467 } else { 468 pNode = InsertNode(pAS_Info, pPrev); 469 pNode->min_ = f_min; 470 pNode->max_ = f_max; 471 } 472 473 /* Look for merging possibilities */ 474 pNext = pNode->next_; 475 while ((pNext != NULL) && (pNext->min_ < pNode->max_)) { 476 if (pNext->max_ > pNode->max_) 477 pNode->max_ = pNext->max_; 478 /* Remove pNext, return ptr to pNext->next */ 479 pNext = RemoveNode(pAS_Info, pNode, pNext); 480 } 481 } 482 } 483 484 /* 485 * Reset all exclusion zones. 486 * Add zones to protect the PLL FracN regions near zero 487 */ 488 static void MT2063_ResetExclZones(struct MT2063_AvoidSpursData_t *pAS_Info) 489 { 490 u32 center; 491 492 dprintk(2, "\n"); 493 494 pAS_Info->nZones = 0; /* this clears the used list */ 495 pAS_Info->usedZones = NULL; /* reset ptr */ 496 pAS_Info->freeZones = NULL; /* reset ptr */ 497 498 center = 499 pAS_Info->f_ref * 500 ((pAS_Info->f_if1_Center - pAS_Info->f_if1_bw / 2 + 501 pAS_Info->f_in) / pAS_Info->f_ref) - pAS_Info->f_in; 502 while (center < 503 pAS_Info->f_if1_Center + pAS_Info->f_if1_bw / 2 + 504 pAS_Info->f_LO1_FracN_Avoid) { 505 /* Exclude LO1 FracN */ 506 MT2063_AddExclZone(pAS_Info, 507 center - pAS_Info->f_LO1_FracN_Avoid, 508 center - 1); 509 MT2063_AddExclZone(pAS_Info, center + 1, 510 center + pAS_Info->f_LO1_FracN_Avoid); 511 center += pAS_Info->f_ref; 512 } 513 514 center = 515 pAS_Info->f_ref * 516 ((pAS_Info->f_if1_Center - pAS_Info->f_if1_bw / 2 - 517 pAS_Info->f_out) / pAS_Info->f_ref) + pAS_Info->f_out; 518 while (center < 519 pAS_Info->f_if1_Center + pAS_Info->f_if1_bw / 2 + 520 pAS_Info->f_LO2_FracN_Avoid) { 521 /* Exclude LO2 FracN */ 522 MT2063_AddExclZone(pAS_Info, 523 center - pAS_Info->f_LO2_FracN_Avoid, 524 center - 1); 525 MT2063_AddExclZone(pAS_Info, center + 1, 526 center + pAS_Info->f_LO2_FracN_Avoid); 527 center += pAS_Info->f_ref; 528 } 529 530 if (MT2063_EXCLUDE_US_DECT_FREQUENCIES(pAS_Info->avoidDECT)) { 531 /* Exclude LO1 values that conflict with DECT channels */ 532 MT2063_AddExclZone(pAS_Info, 1920836000 - pAS_Info->f_in, 1922236000 - pAS_Info->f_in); /* Ctr = 1921.536 */ 533 MT2063_AddExclZone(pAS_Info, 1922564000 - pAS_Info->f_in, 1923964000 - pAS_Info->f_in); /* Ctr = 1923.264 */ 534 MT2063_AddExclZone(pAS_Info, 1924292000 - pAS_Info->f_in, 1925692000 - pAS_Info->f_in); /* Ctr = 1924.992 */ 535 MT2063_AddExclZone(pAS_Info, 1926020000 - pAS_Info->f_in, 1927420000 - pAS_Info->f_in); /* Ctr = 1926.720 */ 536 MT2063_AddExclZone(pAS_Info, 1927748000 - pAS_Info->f_in, 1929148000 - pAS_Info->f_in); /* Ctr = 1928.448 */ 537 } 538 539 if (MT2063_EXCLUDE_EURO_DECT_FREQUENCIES(pAS_Info->avoidDECT)) { 540 MT2063_AddExclZone(pAS_Info, 1896644000 - pAS_Info->f_in, 1898044000 - pAS_Info->f_in); /* Ctr = 1897.344 */ 541 MT2063_AddExclZone(pAS_Info, 1894916000 - pAS_Info->f_in, 1896316000 - pAS_Info->f_in); /* Ctr = 1895.616 */ 542 MT2063_AddExclZone(pAS_Info, 1893188000 - pAS_Info->f_in, 1894588000 - pAS_Info->f_in); /* Ctr = 1893.888 */ 543 MT2063_AddExclZone(pAS_Info, 1891460000 - pAS_Info->f_in, 1892860000 - pAS_Info->f_in); /* Ctr = 1892.16 */ 544 MT2063_AddExclZone(pAS_Info, 1889732000 - pAS_Info->f_in, 1891132000 - pAS_Info->f_in); /* Ctr = 1890.432 */ 545 MT2063_AddExclZone(pAS_Info, 1888004000 - pAS_Info->f_in, 1889404000 - pAS_Info->f_in); /* Ctr = 1888.704 */ 546 MT2063_AddExclZone(pAS_Info, 1886276000 - pAS_Info->f_in, 1887676000 - pAS_Info->f_in); /* Ctr = 1886.976 */ 547 MT2063_AddExclZone(pAS_Info, 1884548000 - pAS_Info->f_in, 1885948000 - pAS_Info->f_in); /* Ctr = 1885.248 */ 548 MT2063_AddExclZone(pAS_Info, 1882820000 - pAS_Info->f_in, 1884220000 - pAS_Info->f_in); /* Ctr = 1883.52 */ 549 MT2063_AddExclZone(pAS_Info, 1881092000 - pAS_Info->f_in, 1882492000 - pAS_Info->f_in); /* Ctr = 1881.792 */ 550 } 551 } 552 553 /* 554 * MT_ChooseFirstIF - Choose the best available 1st IF 555 * If f_Desired is not excluded, choose that first. 556 * Otherwise, return the value closest to f_Center that is 557 * not excluded 558 */ 559 static u32 MT2063_ChooseFirstIF(struct MT2063_AvoidSpursData_t *pAS_Info) 560 { 561 /* 562 * Update "f_Desired" to be the nearest "combinational-multiple" of 563 * "f_LO1_Step". 564 * The resulting number, F_LO1 must be a multiple of f_LO1_Step. 565 * And F_LO1 is the arithmetic sum of f_in + f_Center. 566 * Neither f_in, nor f_Center must be a multiple of f_LO1_Step. 567 * However, the sum must be. 568 */ 569 const u32 f_Desired = 570 pAS_Info->f_LO1_Step * 571 ((pAS_Info->f_if1_Request + pAS_Info->f_in + 572 pAS_Info->f_LO1_Step / 2) / pAS_Info->f_LO1_Step) - 573 pAS_Info->f_in; 574 const u32 f_Step = 575 (pAS_Info->f_LO1_Step > 576 pAS_Info->f_LO2_Step) ? pAS_Info->f_LO1_Step : pAS_Info-> 577 f_LO2_Step; 578 u32 f_Center; 579 s32 i; 580 s32 j = 0; 581 u32 bDesiredExcluded = 0; 582 u32 bZeroExcluded = 0; 583 s32 tmpMin, tmpMax; 584 s32 bestDiff; 585 struct MT2063_ExclZone_t *pNode = pAS_Info->usedZones; 586 struct MT2063_FIFZone_t zones[MT2063_MAX_ZONES]; 587 588 dprintk(2, "\n"); 589 590 if (pAS_Info->nZones == 0) 591 return f_Desired; 592 593 /* 594 * f_Center needs to be an integer multiple of f_Step away 595 * from f_Desired 596 */ 597 if (pAS_Info->f_if1_Center > f_Desired) 598 f_Center = 599 f_Desired + 600 f_Step * 601 ((pAS_Info->f_if1_Center - f_Desired + 602 f_Step / 2) / f_Step); 603 else 604 f_Center = 605 f_Desired - 606 f_Step * 607 ((f_Desired - pAS_Info->f_if1_Center + 608 f_Step / 2) / f_Step); 609 610 /* 611 * Take MT_ExclZones, center around f_Center and change the 612 * resolution to f_Step 613 */ 614 while (pNode != NULL) { 615 /* floor function */ 616 tmpMin = 617 floor((s32) (pNode->min_ - f_Center), (s32) f_Step); 618 619 /* ceil function */ 620 tmpMax = 621 ceil((s32) (pNode->max_ - f_Center), (s32) f_Step); 622 623 if ((pNode->min_ < f_Desired) && (pNode->max_ > f_Desired)) 624 bDesiredExcluded = 1; 625 626 if ((tmpMin < 0) && (tmpMax > 0)) 627 bZeroExcluded = 1; 628 629 /* See if this zone overlaps the previous */ 630 if ((j > 0) && (tmpMin < zones[j - 1].max_)) 631 zones[j - 1].max_ = tmpMax; 632 else { 633 /* Add new zone */ 634 zones[j].min_ = tmpMin; 635 zones[j].max_ = tmpMax; 636 j++; 637 } 638 pNode = pNode->next_; 639 } 640 641 /* 642 * If the desired is okay, return with it 643 */ 644 if (bDesiredExcluded == 0) 645 return f_Desired; 646 647 /* 648 * If the desired is excluded and the center is okay, return with it 649 */ 650 if (bZeroExcluded == 0) 651 return f_Center; 652 653 /* Find the value closest to 0 (f_Center) */ 654 bestDiff = zones[0].min_; 655 for (i = 0; i < j; i++) { 656 if (abs(zones[i].min_) < abs(bestDiff)) 657 bestDiff = zones[i].min_; 658 if (abs(zones[i].max_) < abs(bestDiff)) 659 bestDiff = zones[i].max_; 660 } 661 662 if (bestDiff < 0) 663 return f_Center - ((u32) (-bestDiff) * f_Step); 664 665 return f_Center + (bestDiff * f_Step); 666 } 667 668 /** 669 * IsSpurInBand() - Checks to see if a spur will be present within the IF's 670 * bandwidth. (fIFOut +/- fIFBW, -fIFOut +/- fIFBW) 671 * 672 * ma mb mc md 673 * <--+-+-+-------------------+-------------------+-+-+--> 674 * | ^ 0 ^ | 675 * ^ b=-fIFOut+fIFBW/2 -b=+fIFOut-fIFBW/2 ^ 676 * a=-fIFOut-fIFBW/2 -a=+fIFOut+fIFBW/2 677 * 678 * Note that some equations are doubled to prevent round-off 679 * problems when calculating fIFBW/2 680 * 681 * @pAS_Info: Avoid Spurs information block 682 * @fm: If spur, amount f_IF1 has to move negative 683 * @fp: If spur, amount f_IF1 has to move positive 684 * 685 * Returns 1 if an LO spur would be present, otherwise 0. 686 */ 687 static u32 IsSpurInBand(struct MT2063_AvoidSpursData_t *pAS_Info, 688 u32 *fm, u32 * fp) 689 { 690 /* 691 ** Calculate LO frequency settings. 692 */ 693 u32 n, n0; 694 const u32 f_LO1 = pAS_Info->f_LO1; 695 const u32 f_LO2 = pAS_Info->f_LO2; 696 const u32 d = pAS_Info->f_out + pAS_Info->f_out_bw / 2; 697 const u32 c = d - pAS_Info->f_out_bw; 698 const u32 f = pAS_Info->f_zif_bw / 2; 699 const u32 f_Scale = (f_LO1 / (UINT_MAX / 2 / pAS_Info->maxH1)) + 1; 700 s32 f_nsLO1, f_nsLO2; 701 s32 f_Spur; 702 u32 ma, mb, mc, md, me, mf; 703 u32 lo_gcd, gd_Scale, gc_Scale, gf_Scale, hgds, hgfs, hgcs; 704 705 dprintk(2, "\n"); 706 707 *fm = 0; 708 709 /* 710 ** For each edge (d, c & f), calculate a scale, based on the gcd 711 ** of f_LO1, f_LO2 and the edge value. Use the larger of this 712 ** gcd-based scale factor or f_Scale. 713 */ 714 lo_gcd = gcd(f_LO1, f_LO2); 715 gd_Scale = max((u32) gcd(lo_gcd, d), f_Scale); 716 hgds = gd_Scale / 2; 717 gc_Scale = max((u32) gcd(lo_gcd, c), f_Scale); 718 hgcs = gc_Scale / 2; 719 gf_Scale = max((u32) gcd(lo_gcd, f), f_Scale); 720 hgfs = gf_Scale / 2; 721 722 n0 = DIV_ROUND_UP(f_LO2 - d, f_LO1 - f_LO2); 723 724 /* Check out all multiples of LO1 from n0 to m_maxLOSpurHarmonic */ 725 for (n = n0; n <= pAS_Info->maxH1; ++n) { 726 md = (n * ((f_LO1 + hgds) / gd_Scale) - 727 ((d + hgds) / gd_Scale)) / ((f_LO2 + hgds) / gd_Scale); 728 729 /* If # fLO2 harmonics > m_maxLOSpurHarmonic, then no spurs present */ 730 if (md >= pAS_Info->maxH1) 731 break; 732 733 ma = (n * ((f_LO1 + hgds) / gd_Scale) + 734 ((d + hgds) / gd_Scale)) / ((f_LO2 + hgds) / gd_Scale); 735 736 /* If no spurs between +/- (f_out + f_IFBW/2), then try next harmonic */ 737 if (md == ma) 738 continue; 739 740 mc = (n * ((f_LO1 + hgcs) / gc_Scale) - 741 ((c + hgcs) / gc_Scale)) / ((f_LO2 + hgcs) / gc_Scale); 742 if (mc != md) { 743 f_nsLO1 = (s32) (n * (f_LO1 / gc_Scale)); 744 f_nsLO2 = (s32) (mc * (f_LO2 / gc_Scale)); 745 f_Spur = 746 (gc_Scale * (f_nsLO1 - f_nsLO2)) + 747 n * (f_LO1 % gc_Scale) - mc * (f_LO2 % gc_Scale); 748 749 *fp = ((f_Spur - (s32) c) / (mc - n)) + 1; 750 *fm = (((s32) d - f_Spur) / (mc - n)) + 1; 751 return 1; 752 } 753 754 /* Location of Zero-IF-spur to be checked */ 755 me = (n * ((f_LO1 + hgfs) / gf_Scale) + 756 ((f + hgfs) / gf_Scale)) / ((f_LO2 + hgfs) / gf_Scale); 757 mf = (n * ((f_LO1 + hgfs) / gf_Scale) - 758 ((f + hgfs) / gf_Scale)) / ((f_LO2 + hgfs) / gf_Scale); 759 if (me != mf) { 760 f_nsLO1 = n * (f_LO1 / gf_Scale); 761 f_nsLO2 = me * (f_LO2 / gf_Scale); 762 f_Spur = 763 (gf_Scale * (f_nsLO1 - f_nsLO2)) + 764 n * (f_LO1 % gf_Scale) - me * (f_LO2 % gf_Scale); 765 766 *fp = ((f_Spur + (s32) f) / (me - n)) + 1; 767 *fm = (((s32) f - f_Spur) / (me - n)) + 1; 768 return 1; 769 } 770 771 mb = (n * ((f_LO1 + hgcs) / gc_Scale) + 772 ((c + hgcs) / gc_Scale)) / ((f_LO2 + hgcs) / gc_Scale); 773 if (ma != mb) { 774 f_nsLO1 = n * (f_LO1 / gc_Scale); 775 f_nsLO2 = ma * (f_LO2 / gc_Scale); 776 f_Spur = 777 (gc_Scale * (f_nsLO1 - f_nsLO2)) + 778 n * (f_LO1 % gc_Scale) - ma * (f_LO2 % gc_Scale); 779 780 *fp = (((s32) d + f_Spur) / (ma - n)) + 1; 781 *fm = (-(f_Spur + (s32) c) / (ma - n)) + 1; 782 return 1; 783 } 784 } 785 786 /* No spurs found */ 787 return 0; 788 } 789 790 /* 791 * MT_AvoidSpurs() - Main entry point to avoid spurs. 792 * Checks for existing spurs in present LO1, LO2 freqs 793 * and if present, chooses spur-free LO1, LO2 combination 794 * that tunes the same input/output frequencies. 795 */ 796 static u32 MT2063_AvoidSpurs(struct MT2063_AvoidSpursData_t *pAS_Info) 797 { 798 int status = 0; 799 u32 fm, fp; /* restricted range on LO's */ 800 pAS_Info->bSpurAvoided = 0; 801 pAS_Info->nSpursFound = 0; 802 803 dprintk(2, "\n"); 804 805 if (pAS_Info->maxH1 == 0) 806 return 0; 807 808 /* 809 * Avoid LO Generated Spurs 810 * 811 * Make sure that have no LO-related spurs within the IF output 812 * bandwidth. 813 * 814 * If there is an LO spur in this band, start at the current IF1 frequency 815 * and work out until we find a spur-free frequency or run up against the 816 * 1st IF SAW band edge. Use temporary copies of fLO1 and fLO2 so that they 817 * will be unchanged if a spur-free setting is not found. 818 */ 819 pAS_Info->bSpurPresent = IsSpurInBand(pAS_Info, &fm, &fp); 820 if (pAS_Info->bSpurPresent) { 821 u32 zfIF1 = pAS_Info->f_LO1 - pAS_Info->f_in; /* current attempt at a 1st IF */ 822 u32 zfLO1 = pAS_Info->f_LO1; /* current attempt at an LO1 freq */ 823 u32 zfLO2 = pAS_Info->f_LO2; /* current attempt at an LO2 freq */ 824 u32 delta_IF1; 825 u32 new_IF1; 826 827 /* 828 ** Spur was found, attempt to find a spur-free 1st IF 829 */ 830 do { 831 pAS_Info->nSpursFound++; 832 833 /* Raise f_IF1_upper, if needed */ 834 MT2063_AddExclZone(pAS_Info, zfIF1 - fm, zfIF1 + fp); 835 836 /* Choose next IF1 that is closest to f_IF1_CENTER */ 837 new_IF1 = MT2063_ChooseFirstIF(pAS_Info); 838 839 if (new_IF1 > zfIF1) { 840 pAS_Info->f_LO1 += (new_IF1 - zfIF1); 841 pAS_Info->f_LO2 += (new_IF1 - zfIF1); 842 } else { 843 pAS_Info->f_LO1 -= (zfIF1 - new_IF1); 844 pAS_Info->f_LO2 -= (zfIF1 - new_IF1); 845 } 846 zfIF1 = new_IF1; 847 848 if (zfIF1 > pAS_Info->f_if1_Center) 849 delta_IF1 = zfIF1 - pAS_Info->f_if1_Center; 850 else 851 delta_IF1 = pAS_Info->f_if1_Center - zfIF1; 852 853 pAS_Info->bSpurPresent = IsSpurInBand(pAS_Info, &fm, &fp); 854 /* 855 * Continue while the new 1st IF is still within the 1st IF bandwidth 856 * and there is a spur in the band (again) 857 */ 858 } while ((2 * delta_IF1 + pAS_Info->f_out_bw <= pAS_Info->f_if1_bw) && pAS_Info->bSpurPresent); 859 860 /* 861 * Use the LO-spur free values found. If the search went all 862 * the way to the 1st IF band edge and always found spurs, just 863 * leave the original choice. It's as "good" as any other. 864 */ 865 if (pAS_Info->bSpurPresent == 1) { 866 status |= MT2063_SPUR_PRESENT_ERR; 867 pAS_Info->f_LO1 = zfLO1; 868 pAS_Info->f_LO2 = zfLO2; 869 } else 870 pAS_Info->bSpurAvoided = 1; 871 } 872 873 status |= 874 ((pAS_Info-> 875 nSpursFound << MT2063_SPUR_SHIFT) & MT2063_SPUR_CNT_MASK); 876 877 return status; 878 } 879 880 /* 881 * Constants used by the tuning algorithm 882 */ 883 #define MT2063_REF_FREQ (16000000UL) /* Reference oscillator Frequency (in Hz) */ 884 #define MT2063_IF1_BW (22000000UL) /* The IF1 filter bandwidth (in Hz) */ 885 #define MT2063_TUNE_STEP_SIZE (50000UL) /* Tune in steps of 50 kHz */ 886 #define MT2063_SPUR_STEP_HZ (250000UL) /* Step size (in Hz) to move IF1 when avoiding spurs */ 887 #define MT2063_ZIF_BW (2000000UL) /* Zero-IF spur-free bandwidth (in Hz) */ 888 #define MT2063_MAX_HARMONICS_1 (15UL) /* Highest intra-tuner LO Spur Harmonic to be avoided */ 889 #define MT2063_MAX_HARMONICS_2 (5UL) /* Highest inter-tuner LO Spur Harmonic to be avoided */ 890 #define MT2063_MIN_LO_SEP (1000000UL) /* Minimum inter-tuner LO frequency separation */ 891 #define MT2063_LO1_FRACN_AVOID (0UL) /* LO1 FracN numerator avoid region (in Hz) */ 892 #define MT2063_LO2_FRACN_AVOID (199999UL) /* LO2 FracN numerator avoid region (in Hz) */ 893 #define MT2063_MIN_FIN_FREQ (44000000UL) /* Minimum input frequency (in Hz) */ 894 #define MT2063_MAX_FIN_FREQ (1100000000UL) /* Maximum input frequency (in Hz) */ 895 #define MT2063_MIN_FOUT_FREQ (36000000UL) /* Minimum output frequency (in Hz) */ 896 #define MT2063_MAX_FOUT_FREQ (57000000UL) /* Maximum output frequency (in Hz) */ 897 #define MT2063_MIN_DNC_FREQ (1293000000UL) /* Minimum LO2 frequency (in Hz) */ 898 #define MT2063_MAX_DNC_FREQ (1614000000UL) /* Maximum LO2 frequency (in Hz) */ 899 #define MT2063_MIN_UPC_FREQ (1396000000UL) /* Minimum LO1 frequency (in Hz) */ 900 #define MT2063_MAX_UPC_FREQ (2750000000UL) /* Maximum LO1 frequency (in Hz) */ 901 902 /* 903 * Define the supported Part/Rev codes for the MT2063 904 */ 905 #define MT2063_B0 (0x9B) 906 #define MT2063_B1 (0x9C) 907 #define MT2063_B2 (0x9D) 908 #define MT2063_B3 (0x9E) 909 910 /** 911 * mt2063_lockStatus - Checks to see if LO1 and LO2 are locked 912 * 913 * @state: struct mt2063_state pointer 914 * 915 * This function returns 0, if no lock, 1 if locked and a value < 1 if error 916 */ 917 static int mt2063_lockStatus(struct mt2063_state *state) 918 { 919 const u32 nMaxWait = 100; /* wait a maximum of 100 msec */ 920 const u32 nPollRate = 2; /* poll status bits every 2 ms */ 921 const u32 nMaxLoops = nMaxWait / nPollRate; 922 const u8 LO1LK = 0x80; 923 u8 LO2LK = 0x08; 924 int status; 925 u32 nDelays = 0; 926 927 dprintk(2, "\n"); 928 929 /* LO2 Lock bit was in a different place for B0 version */ 930 if (state->tuner_id == MT2063_B0) 931 LO2LK = 0x40; 932 933 do { 934 status = mt2063_read(state, MT2063_REG_LO_STATUS, 935 &state->reg[MT2063_REG_LO_STATUS], 1); 936 937 if (status < 0) 938 return status; 939 940 if ((state->reg[MT2063_REG_LO_STATUS] & (LO1LK | LO2LK)) == 941 (LO1LK | LO2LK)) { 942 return TUNER_STATUS_LOCKED | TUNER_STATUS_STEREO; 943 } 944 msleep(nPollRate); /* Wait between retries */ 945 } while (++nDelays < nMaxLoops); 946 947 /* 948 * Got no lock or partial lock 949 */ 950 return 0; 951 } 952 953 /* 954 * Constants for setting receiver modes. 955 * (6 modes defined at this time, enumerated by mt2063_delivery_sys) 956 * (DNC1GC & DNC2GC are the values, which are used, when the specific 957 * DNC Output is selected, the other is always off) 958 * 959 * enum mt2063_delivery_sys 960 * -------------+---------------------------------------------- 961 * Mode 0 : | MT2063_CABLE_QAM 962 * Mode 1 : | MT2063_CABLE_ANALOG 963 * Mode 2 : | MT2063_OFFAIR_COFDM 964 * Mode 3 : | MT2063_OFFAIR_COFDM_SAWLESS 965 * Mode 4 : | MT2063_OFFAIR_ANALOG 966 * Mode 5 : | MT2063_OFFAIR_8VSB 967 * --------------+---------------------------------------------- 968 * 969 * |<---------- Mode -------------->| 970 * Reg Field | 0 | 1 | 2 | 3 | 4 | 5 | 971 * ------------+-----+-----+-----+-----+-----+-----+ 972 * RFAGCen | OFF | OFF | OFF | OFF | OFF | OFF 973 * LNARin | 0 | 0 | 3 | 3 | 3 | 3 974 * FIFFQen | 1 | 1 | 1 | 1 | 1 | 1 975 * FIFFq | 0 | 0 | 0 | 0 | 0 | 0 976 * DNC1gc | 0 | 0 | 0 | 0 | 0 | 0 977 * DNC2gc | 0 | 0 | 0 | 0 | 0 | 0 978 * GCU Auto | 1 | 1 | 1 | 1 | 1 | 1 979 * LNA max Atn | 31 | 31 | 31 | 31 | 31 | 31 980 * LNA Target | 44 | 43 | 43 | 43 | 43 | 43 981 * ign RF Ovl | 0 | 0 | 0 | 0 | 0 | 0 982 * RF max Atn | 31 | 31 | 31 | 31 | 31 | 31 983 * PD1 Target | 36 | 36 | 38 | 38 | 36 | 38 984 * ign FIF Ovl | 0 | 0 | 0 | 0 | 0 | 0 985 * FIF max Atn | 5 | 5 | 5 | 5 | 5 | 5 986 * PD2 Target | 40 | 33 | 42 | 42 | 33 | 42 987 */ 988 989 enum mt2063_delivery_sys { 990 MT2063_CABLE_QAM = 0, 991 MT2063_CABLE_ANALOG, 992 MT2063_OFFAIR_COFDM, 993 MT2063_OFFAIR_COFDM_SAWLESS, 994 MT2063_OFFAIR_ANALOG, 995 MT2063_OFFAIR_8VSB, 996 MT2063_NUM_RCVR_MODES 997 }; 998 999 static const char *mt2063_mode_name[] = { 1000 [MT2063_CABLE_QAM] = "digital cable", 1001 [MT2063_CABLE_ANALOG] = "analog cable", 1002 [MT2063_OFFAIR_COFDM] = "digital offair", 1003 [MT2063_OFFAIR_COFDM_SAWLESS] = "digital offair without SAW", 1004 [MT2063_OFFAIR_ANALOG] = "analog offair", 1005 [MT2063_OFFAIR_8VSB] = "analog offair 8vsb", 1006 }; 1007 1008 static const u8 RFAGCEN[] = { 0, 0, 0, 0, 0, 0 }; 1009 static const u8 LNARIN[] = { 0, 0, 3, 3, 3, 3 }; 1010 static const u8 FIFFQEN[] = { 1, 1, 1, 1, 1, 1 }; 1011 static const u8 FIFFQ[] = { 0, 0, 0, 0, 0, 0 }; 1012 static const u8 DNC1GC[] = { 0, 0, 0, 0, 0, 0 }; 1013 static const u8 DNC2GC[] = { 0, 0, 0, 0, 0, 0 }; 1014 static const u8 ACLNAMAX[] = { 31, 31, 31, 31, 31, 31 }; 1015 static const u8 LNATGT[] = { 44, 43, 43, 43, 43, 43 }; 1016 static const u8 RFOVDIS[] = { 0, 0, 0, 0, 0, 0 }; 1017 static const u8 ACRFMAX[] = { 31, 31, 31, 31, 31, 31 }; 1018 static const u8 PD1TGT[] = { 36, 36, 38, 38, 36, 38 }; 1019 static const u8 FIFOVDIS[] = { 0, 0, 0, 0, 0, 0 }; 1020 static const u8 ACFIFMAX[] = { 29, 29, 29, 29, 29, 29 }; 1021 static const u8 PD2TGT[] = { 40, 33, 38, 42, 30, 38 }; 1022 1023 /* 1024 * mt2063_set_dnc_output_enable() 1025 */ 1026 static u32 mt2063_get_dnc_output_enable(struct mt2063_state *state, 1027 enum MT2063_DNC_Output_Enable *pValue) 1028 { 1029 dprintk(2, "\n"); 1030 1031 if ((state->reg[MT2063_REG_DNC_GAIN] & 0x03) == 0x03) { /* if DNC1 is off */ 1032 if ((state->reg[MT2063_REG_VGA_GAIN] & 0x03) == 0x03) /* if DNC2 is off */ 1033 *pValue = MT2063_DNC_NONE; 1034 else 1035 *pValue = MT2063_DNC_2; 1036 } else { /* DNC1 is on */ 1037 if ((state->reg[MT2063_REG_VGA_GAIN] & 0x03) == 0x03) /* if DNC2 is off */ 1038 *pValue = MT2063_DNC_1; 1039 else 1040 *pValue = MT2063_DNC_BOTH; 1041 } 1042 return 0; 1043 } 1044 1045 /* 1046 * mt2063_set_dnc_output_enable() 1047 */ 1048 static u32 mt2063_set_dnc_output_enable(struct mt2063_state *state, 1049 enum MT2063_DNC_Output_Enable nValue) 1050 { 1051 int status = 0; /* Status to be returned */ 1052 u8 val = 0; 1053 1054 dprintk(2, "\n"); 1055 1056 /* selects, which DNC output is used */ 1057 switch (nValue) { 1058 case MT2063_DNC_NONE: 1059 val = (state->reg[MT2063_REG_DNC_GAIN] & 0xFC) | 0x03; /* Set DNC1GC=3 */ 1060 if (state->reg[MT2063_REG_DNC_GAIN] != 1061 val) 1062 status |= 1063 mt2063_setreg(state, 1064 MT2063_REG_DNC_GAIN, 1065 val); 1066 1067 val = (state->reg[MT2063_REG_VGA_GAIN] & 0xFC) | 0x03; /* Set DNC2GC=3 */ 1068 if (state->reg[MT2063_REG_VGA_GAIN] != 1069 val) 1070 status |= 1071 mt2063_setreg(state, 1072 MT2063_REG_VGA_GAIN, 1073 val); 1074 1075 val = (state->reg[MT2063_REG_RSVD_20] & ~0x40); /* Set PD2MUX=0 */ 1076 if (state->reg[MT2063_REG_RSVD_20] != 1077 val) 1078 status |= 1079 mt2063_setreg(state, 1080 MT2063_REG_RSVD_20, 1081 val); 1082 1083 break; 1084 case MT2063_DNC_1: 1085 val = (state->reg[MT2063_REG_DNC_GAIN] & 0xFC) | (DNC1GC[state->rcvr_mode] & 0x03); /* Set DNC1GC=x */ 1086 if (state->reg[MT2063_REG_DNC_GAIN] != 1087 val) 1088 status |= 1089 mt2063_setreg(state, 1090 MT2063_REG_DNC_GAIN, 1091 val); 1092 1093 val = (state->reg[MT2063_REG_VGA_GAIN] & 0xFC) | 0x03; /* Set DNC2GC=3 */ 1094 if (state->reg[MT2063_REG_VGA_GAIN] != 1095 val) 1096 status |= 1097 mt2063_setreg(state, 1098 MT2063_REG_VGA_GAIN, 1099 val); 1100 1101 val = (state->reg[MT2063_REG_RSVD_20] & ~0x40); /* Set PD2MUX=0 */ 1102 if (state->reg[MT2063_REG_RSVD_20] != 1103 val) 1104 status |= 1105 mt2063_setreg(state, 1106 MT2063_REG_RSVD_20, 1107 val); 1108 1109 break; 1110 case MT2063_DNC_2: 1111 val = (state->reg[MT2063_REG_DNC_GAIN] & 0xFC) | 0x03; /* Set DNC1GC=3 */ 1112 if (state->reg[MT2063_REG_DNC_GAIN] != 1113 val) 1114 status |= 1115 mt2063_setreg(state, 1116 MT2063_REG_DNC_GAIN, 1117 val); 1118 1119 val = (state->reg[MT2063_REG_VGA_GAIN] & 0xFC) | (DNC2GC[state->rcvr_mode] & 0x03); /* Set DNC2GC=x */ 1120 if (state->reg[MT2063_REG_VGA_GAIN] != 1121 val) 1122 status |= 1123 mt2063_setreg(state, 1124 MT2063_REG_VGA_GAIN, 1125 val); 1126 1127 val = (state->reg[MT2063_REG_RSVD_20] | 0x40); /* Set PD2MUX=1 */ 1128 if (state->reg[MT2063_REG_RSVD_20] != 1129 val) 1130 status |= 1131 mt2063_setreg(state, 1132 MT2063_REG_RSVD_20, 1133 val); 1134 1135 break; 1136 case MT2063_DNC_BOTH: 1137 val = (state->reg[MT2063_REG_DNC_GAIN] & 0xFC) | (DNC1GC[state->rcvr_mode] & 0x03); /* Set DNC1GC=x */ 1138 if (state->reg[MT2063_REG_DNC_GAIN] != 1139 val) 1140 status |= 1141 mt2063_setreg(state, 1142 MT2063_REG_DNC_GAIN, 1143 val); 1144 1145 val = (state->reg[MT2063_REG_VGA_GAIN] & 0xFC) | (DNC2GC[state->rcvr_mode] & 0x03); /* Set DNC2GC=x */ 1146 if (state->reg[MT2063_REG_VGA_GAIN] != 1147 val) 1148 status |= 1149 mt2063_setreg(state, 1150 MT2063_REG_VGA_GAIN, 1151 val); 1152 1153 val = (state->reg[MT2063_REG_RSVD_20] | 0x40); /* Set PD2MUX=1 */ 1154 if (state->reg[MT2063_REG_RSVD_20] != 1155 val) 1156 status |= 1157 mt2063_setreg(state, 1158 MT2063_REG_RSVD_20, 1159 val); 1160 1161 break; 1162 default: 1163 break; 1164 } 1165 1166 return status; 1167 } 1168 1169 /* 1170 * MT2063_SetReceiverMode() - Set the MT2063 receiver mode, according with 1171 * the selected enum mt2063_delivery_sys type. 1172 * 1173 * (DNC1GC & DNC2GC are the values, which are used, when the specific 1174 * DNC Output is selected, the other is always off) 1175 * 1176 * @state: ptr to mt2063_state structure 1177 * @Mode: desired receiver delivery system 1178 * 1179 * Note: Register cache must be valid for it to work 1180 */ 1181 1182 static u32 MT2063_SetReceiverMode(struct mt2063_state *state, 1183 enum mt2063_delivery_sys Mode) 1184 { 1185 int status = 0; /* Status to be returned */ 1186 u8 val; 1187 u32 longval; 1188 1189 dprintk(2, "\n"); 1190 1191 if (Mode >= MT2063_NUM_RCVR_MODES) 1192 status = -ERANGE; 1193 1194 /* RFAGCen */ 1195 if (status >= 0) { 1196 val = 1197 (state-> 1198 reg[MT2063_REG_PD1_TGT] & ~0x40) | (RFAGCEN[Mode] 1199 ? 0x40 : 1200 0x00); 1201 if (state->reg[MT2063_REG_PD1_TGT] != val) 1202 status |= mt2063_setreg(state, MT2063_REG_PD1_TGT, val); 1203 } 1204 1205 /* LNARin */ 1206 if (status >= 0) { 1207 u8 val = (state->reg[MT2063_REG_CTRL_2C] & ~0x03) | 1208 (LNARIN[Mode] & 0x03); 1209 if (state->reg[MT2063_REG_CTRL_2C] != val) 1210 status |= mt2063_setreg(state, MT2063_REG_CTRL_2C, val); 1211 } 1212 1213 /* FIFFQEN and FIFFQ */ 1214 if (status >= 0) { 1215 val = 1216 (state-> 1217 reg[MT2063_REG_FIFF_CTRL2] & ~0xF0) | 1218 (FIFFQEN[Mode] << 7) | (FIFFQ[Mode] << 4); 1219 if (state->reg[MT2063_REG_FIFF_CTRL2] != val) { 1220 status |= 1221 mt2063_setreg(state, MT2063_REG_FIFF_CTRL2, val); 1222 /* trigger FIFF calibration, needed after changing FIFFQ */ 1223 val = 1224 (state->reg[MT2063_REG_FIFF_CTRL] | 0x01); 1225 status |= 1226 mt2063_setreg(state, MT2063_REG_FIFF_CTRL, val); 1227 val = 1228 (state-> 1229 reg[MT2063_REG_FIFF_CTRL] & ~0x01); 1230 status |= 1231 mt2063_setreg(state, MT2063_REG_FIFF_CTRL, val); 1232 } 1233 } 1234 1235 /* DNC1GC & DNC2GC */ 1236 status |= mt2063_get_dnc_output_enable(state, &longval); 1237 status |= mt2063_set_dnc_output_enable(state, longval); 1238 1239 /* acLNAmax */ 1240 if (status >= 0) { 1241 u8 val = (state->reg[MT2063_REG_LNA_OV] & ~0x1F) | 1242 (ACLNAMAX[Mode] & 0x1F); 1243 if (state->reg[MT2063_REG_LNA_OV] != val) 1244 status |= mt2063_setreg(state, MT2063_REG_LNA_OV, val); 1245 } 1246 1247 /* LNATGT */ 1248 if (status >= 0) { 1249 u8 val = (state->reg[MT2063_REG_LNA_TGT] & ~0x3F) | 1250 (LNATGT[Mode] & 0x3F); 1251 if (state->reg[MT2063_REG_LNA_TGT] != val) 1252 status |= mt2063_setreg(state, MT2063_REG_LNA_TGT, val); 1253 } 1254 1255 /* ACRF */ 1256 if (status >= 0) { 1257 u8 val = (state->reg[MT2063_REG_RF_OV] & ~0x1F) | 1258 (ACRFMAX[Mode] & 0x1F); 1259 if (state->reg[MT2063_REG_RF_OV] != val) 1260 status |= mt2063_setreg(state, MT2063_REG_RF_OV, val); 1261 } 1262 1263 /* PD1TGT */ 1264 if (status >= 0) { 1265 u8 val = (state->reg[MT2063_REG_PD1_TGT] & ~0x3F) | 1266 (PD1TGT[Mode] & 0x3F); 1267 if (state->reg[MT2063_REG_PD1_TGT] != val) 1268 status |= mt2063_setreg(state, MT2063_REG_PD1_TGT, val); 1269 } 1270 1271 /* FIFATN */ 1272 if (status >= 0) { 1273 u8 val = ACFIFMAX[Mode]; 1274 if (state->reg[MT2063_REG_PART_REV] != MT2063_B3 && val > 5) 1275 val = 5; 1276 val = (state->reg[MT2063_REG_FIF_OV] & ~0x1F) | 1277 (val & 0x1F); 1278 if (state->reg[MT2063_REG_FIF_OV] != val) 1279 status |= mt2063_setreg(state, MT2063_REG_FIF_OV, val); 1280 } 1281 1282 /* PD2TGT */ 1283 if (status >= 0) { 1284 u8 val = (state->reg[MT2063_REG_PD2_TGT] & ~0x3F) | 1285 (PD2TGT[Mode] & 0x3F); 1286 if (state->reg[MT2063_REG_PD2_TGT] != val) 1287 status |= mt2063_setreg(state, MT2063_REG_PD2_TGT, val); 1288 } 1289 1290 /* Ignore ATN Overload */ 1291 if (status >= 0) { 1292 val = (state->reg[MT2063_REG_LNA_TGT] & ~0x80) | 1293 (RFOVDIS[Mode] ? 0x80 : 0x00); 1294 if (state->reg[MT2063_REG_LNA_TGT] != val) 1295 status |= mt2063_setreg(state, MT2063_REG_LNA_TGT, val); 1296 } 1297 1298 /* Ignore FIF Overload */ 1299 if (status >= 0) { 1300 val = (state->reg[MT2063_REG_PD1_TGT] & ~0x80) | 1301 (FIFOVDIS[Mode] ? 0x80 : 0x00); 1302 if (state->reg[MT2063_REG_PD1_TGT] != val) 1303 status |= mt2063_setreg(state, MT2063_REG_PD1_TGT, val); 1304 } 1305 1306 if (status >= 0) { 1307 state->rcvr_mode = Mode; 1308 dprintk(1, "mt2063 mode changed to %s\n", 1309 mt2063_mode_name[state->rcvr_mode]); 1310 } 1311 1312 return status; 1313 } 1314 1315 /* 1316 * MT2063_ClearPowerMaskBits () - Clears the power-down mask bits for various 1317 * sections of the MT2063 1318 * 1319 * @Bits: Mask bits to be cleared. 1320 * 1321 * See definition of MT2063_Mask_Bits type for description 1322 * of each of the power bits. 1323 */ 1324 static u32 MT2063_ClearPowerMaskBits(struct mt2063_state *state, 1325 enum MT2063_Mask_Bits Bits) 1326 { 1327 int status = 0; 1328 1329 dprintk(2, "\n"); 1330 Bits = (enum MT2063_Mask_Bits)(Bits & MT2063_ALL_SD); /* Only valid bits for this tuner */ 1331 if ((Bits & 0xFF00) != 0) { 1332 state->reg[MT2063_REG_PWR_2] &= ~(u8) (Bits >> 8); 1333 status |= 1334 mt2063_write(state, 1335 MT2063_REG_PWR_2, 1336 &state->reg[MT2063_REG_PWR_2], 1); 1337 } 1338 if ((Bits & 0xFF) != 0) { 1339 state->reg[MT2063_REG_PWR_1] &= ~(u8) (Bits & 0xFF); 1340 status |= 1341 mt2063_write(state, 1342 MT2063_REG_PWR_1, 1343 &state->reg[MT2063_REG_PWR_1], 1); 1344 } 1345 1346 return status; 1347 } 1348 1349 /* 1350 * MT2063_SoftwareShutdown() - Enables or disables software shutdown function. 1351 * When Shutdown is 1, any section whose power 1352 * mask is set will be shutdown. 1353 */ 1354 static u32 MT2063_SoftwareShutdown(struct mt2063_state *state, u8 Shutdown) 1355 { 1356 int status; 1357 1358 dprintk(2, "\n"); 1359 if (Shutdown == 1) 1360 state->reg[MT2063_REG_PWR_1] |= 0x04; 1361 else 1362 state->reg[MT2063_REG_PWR_1] &= ~0x04; 1363 1364 status = mt2063_write(state, 1365 MT2063_REG_PWR_1, 1366 &state->reg[MT2063_REG_PWR_1], 1); 1367 1368 if (Shutdown != 1) { 1369 state->reg[MT2063_REG_BYP_CTRL] = 1370 (state->reg[MT2063_REG_BYP_CTRL] & 0x9F) | 0x40; 1371 status |= 1372 mt2063_write(state, 1373 MT2063_REG_BYP_CTRL, 1374 &state->reg[MT2063_REG_BYP_CTRL], 1375 1); 1376 state->reg[MT2063_REG_BYP_CTRL] = 1377 (state->reg[MT2063_REG_BYP_CTRL] & 0x9F); 1378 status |= 1379 mt2063_write(state, 1380 MT2063_REG_BYP_CTRL, 1381 &state->reg[MT2063_REG_BYP_CTRL], 1382 1); 1383 } 1384 1385 return status; 1386 } 1387 1388 static u32 MT2063_Round_fLO(u32 f_LO, u32 f_LO_Step, u32 f_ref) 1389 { 1390 return f_ref * (f_LO / f_ref) 1391 + f_LO_Step * (((f_LO % f_ref) + (f_LO_Step / 2)) / f_LO_Step); 1392 } 1393 1394 /** 1395 * fLO_FractionalTerm() - Calculates the portion contributed by FracN / denom. 1396 * This function preserves maximum precision without 1397 * risk of overflow. It accurately calculates 1398 * f_ref * num / denom to within 1 HZ with fixed math. 1399 * 1400 * @f_ref: SRO frequency. 1401 * @num: Fractional portion of the multiplier 1402 * @denom: denominator portion of the ratio 1403 * 1404 * This calculation handles f_ref as two separate 14-bit fields. 1405 * Therefore, a maximum value of 2^28-1 may safely be used for f_ref. 1406 * This is the genesis of the magic number "14" and the magic mask value of 1407 * 0x03FFF. 1408 * 1409 * This routine successfully handles denom values up to and including 2^18. 1410 * Returns: f_ref * num / denom 1411 */ 1412 static u32 MT2063_fLO_FractionalTerm(u32 f_ref, u32 num, u32 denom) 1413 { 1414 u32 t1 = (f_ref >> 14) * num; 1415 u32 term1 = t1 / denom; 1416 u32 loss = t1 % denom; 1417 u32 term2 = 1418 (((f_ref & 0x00003FFF) * num + (loss << 14)) + (denom / 2)) / denom; 1419 return (term1 << 14) + term2; 1420 } 1421 1422 /* 1423 * CalcLO1Mult()- Calculates Integer divider value and the numerator 1424 * value for a FracN PLL. 1425 * 1426 * This function assumes that the f_LO and f_Ref are 1427 * evenly divisible by f_LO_Step. 1428 * 1429 * @Div: OUTPUT: Whole number portion of the multiplier 1430 * @FracN: OUTPUT: Fractional portion of the multiplier 1431 * @f_LO: desired LO frequency. 1432 * @f_LO_Step: Minimum step size for the LO (in Hz). 1433 * @f_Ref: SRO frequency. 1434 * @f_Avoid: Range of PLL frequencies to avoid near integer multiples 1435 * of f_Ref (in Hz). 1436 * 1437 * Returns: Recalculated LO frequency. 1438 */ 1439 static u32 MT2063_CalcLO1Mult(u32 *Div, 1440 u32 *FracN, 1441 u32 f_LO, 1442 u32 f_LO_Step, u32 f_Ref) 1443 { 1444 /* Calculate the whole number portion of the divider */ 1445 *Div = f_LO / f_Ref; 1446 1447 /* Calculate the numerator value (round to nearest f_LO_Step) */ 1448 *FracN = 1449 (64 * (((f_LO % f_Ref) + (f_LO_Step / 2)) / f_LO_Step) + 1450 (f_Ref / f_LO_Step / 2)) / (f_Ref / f_LO_Step); 1451 1452 return (f_Ref * (*Div)) + MT2063_fLO_FractionalTerm(f_Ref, *FracN, 64); 1453 } 1454 1455 /** 1456 * CalcLO2Mult() - Calculates Integer divider value and the numerator 1457 * value for a FracN PLL. 1458 * 1459 * This function assumes that the f_LO and f_Ref are 1460 * evenly divisible by f_LO_Step. 1461 * 1462 * @Div: OUTPUT: Whole number portion of the multiplier 1463 * @FracN: OUTPUT: Fractional portion of the multiplier 1464 * @f_LO: desired LO frequency. 1465 * @f_LO_Step: Minimum step size for the LO (in Hz). 1466 * @f_Ref: SRO frequency. 1467 * 1468 * Returns: Recalculated LO frequency. 1469 */ 1470 static u32 MT2063_CalcLO2Mult(u32 *Div, 1471 u32 *FracN, 1472 u32 f_LO, 1473 u32 f_LO_Step, u32 f_Ref) 1474 { 1475 /* Calculate the whole number portion of the divider */ 1476 *Div = f_LO / f_Ref; 1477 1478 /* Calculate the numerator value (round to nearest f_LO_Step) */ 1479 *FracN = 1480 (8191 * (((f_LO % f_Ref) + (f_LO_Step / 2)) / f_LO_Step) + 1481 (f_Ref / f_LO_Step / 2)) / (f_Ref / f_LO_Step); 1482 1483 return (f_Ref * (*Div)) + MT2063_fLO_FractionalTerm(f_Ref, *FracN, 1484 8191); 1485 } 1486 1487 /* 1488 * FindClearTuneFilter() - Calculate the corrrect ClearTune filter to be 1489 * used for a given input frequency. 1490 * 1491 * @state: ptr to tuner data structure 1492 * @f_in: RF input center frequency (in Hz). 1493 * 1494 * Returns: ClearTune filter number (0-31) 1495 */ 1496 static u32 FindClearTuneFilter(struct mt2063_state *state, u32 f_in) 1497 { 1498 u32 RFBand; 1499 u32 idx; /* index loop */ 1500 1501 /* 1502 ** Find RF Band setting 1503 */ 1504 RFBand = 31; /* def when f_in > all */ 1505 for (idx = 0; idx < 31; ++idx) { 1506 if (state->CTFiltMax[idx] >= f_in) { 1507 RFBand = idx; 1508 break; 1509 } 1510 } 1511 return RFBand; 1512 } 1513 1514 /* 1515 * MT2063_Tune() - Change the tuner's tuned frequency to RFin. 1516 */ 1517 static u32 MT2063_Tune(struct mt2063_state *state, u32 f_in) 1518 { /* RF input center frequency */ 1519 1520 int status = 0; 1521 u32 LO1; /* 1st LO register value */ 1522 u32 Num1; /* Numerator for LO1 reg. value */ 1523 u32 f_IF1; /* 1st IF requested */ 1524 u32 LO2; /* 2nd LO register value */ 1525 u32 Num2; /* Numerator for LO2 reg. value */ 1526 u32 ofLO1, ofLO2; /* last time's LO frequencies */ 1527 u8 fiffc = 0x80; /* FIFF center freq from tuner */ 1528 u32 fiffof; /* Offset from FIFF center freq */ 1529 const u8 LO1LK = 0x80; /* Mask for LO1 Lock bit */ 1530 u8 LO2LK = 0x08; /* Mask for LO2 Lock bit */ 1531 u8 val; 1532 u32 RFBand; 1533 1534 dprintk(2, "\n"); 1535 /* Check the input and output frequency ranges */ 1536 if ((f_in < MT2063_MIN_FIN_FREQ) || (f_in > MT2063_MAX_FIN_FREQ)) 1537 return -EINVAL; 1538 1539 if ((state->AS_Data.f_out < MT2063_MIN_FOUT_FREQ) 1540 || (state->AS_Data.f_out > MT2063_MAX_FOUT_FREQ)) 1541 return -EINVAL; 1542 1543 /* 1544 * Save original LO1 and LO2 register values 1545 */ 1546 ofLO1 = state->AS_Data.f_LO1; 1547 ofLO2 = state->AS_Data.f_LO2; 1548 1549 /* 1550 * Find and set RF Band setting 1551 */ 1552 if (state->ctfilt_sw == 1) { 1553 val = (state->reg[MT2063_REG_CTUNE_CTRL] | 0x08); 1554 if (state->reg[MT2063_REG_CTUNE_CTRL] != val) { 1555 status |= 1556 mt2063_setreg(state, MT2063_REG_CTUNE_CTRL, val); 1557 } 1558 val = state->reg[MT2063_REG_CTUNE_OV]; 1559 RFBand = FindClearTuneFilter(state, f_in); 1560 state->reg[MT2063_REG_CTUNE_OV] = 1561 (u8) ((state->reg[MT2063_REG_CTUNE_OV] & ~0x1F) 1562 | RFBand); 1563 if (state->reg[MT2063_REG_CTUNE_OV] != val) { 1564 status |= 1565 mt2063_setreg(state, MT2063_REG_CTUNE_OV, val); 1566 } 1567 } 1568 1569 /* 1570 * Read the FIFF Center Frequency from the tuner 1571 */ 1572 if (status >= 0) { 1573 status |= 1574 mt2063_read(state, 1575 MT2063_REG_FIFFC, 1576 &state->reg[MT2063_REG_FIFFC], 1); 1577 fiffc = state->reg[MT2063_REG_FIFFC]; 1578 } 1579 /* 1580 * Assign in the requested values 1581 */ 1582 state->AS_Data.f_in = f_in; 1583 /* Request a 1st IF such that LO1 is on a step size */ 1584 state->AS_Data.f_if1_Request = 1585 MT2063_Round_fLO(state->AS_Data.f_if1_Request + f_in, 1586 state->AS_Data.f_LO1_Step, 1587 state->AS_Data.f_ref) - f_in; 1588 1589 /* 1590 * Calculate frequency settings. f_IF1_FREQ + f_in is the 1591 * desired LO1 frequency 1592 */ 1593 MT2063_ResetExclZones(&state->AS_Data); 1594 1595 f_IF1 = MT2063_ChooseFirstIF(&state->AS_Data); 1596 1597 state->AS_Data.f_LO1 = 1598 MT2063_Round_fLO(f_IF1 + f_in, state->AS_Data.f_LO1_Step, 1599 state->AS_Data.f_ref); 1600 1601 state->AS_Data.f_LO2 = 1602 MT2063_Round_fLO(state->AS_Data.f_LO1 - state->AS_Data.f_out - f_in, 1603 state->AS_Data.f_LO2_Step, state->AS_Data.f_ref); 1604 1605 /* 1606 * Check for any LO spurs in the output bandwidth and adjust 1607 * the LO settings to avoid them if needed 1608 */ 1609 status |= MT2063_AvoidSpurs(&state->AS_Data); 1610 /* 1611 * MT_AvoidSpurs spurs may have changed the LO1 & LO2 values. 1612 * Recalculate the LO frequencies and the values to be placed 1613 * in the tuning registers. 1614 */ 1615 state->AS_Data.f_LO1 = 1616 MT2063_CalcLO1Mult(&LO1, &Num1, state->AS_Data.f_LO1, 1617 state->AS_Data.f_LO1_Step, state->AS_Data.f_ref); 1618 state->AS_Data.f_LO2 = 1619 MT2063_Round_fLO(state->AS_Data.f_LO1 - state->AS_Data.f_out - f_in, 1620 state->AS_Data.f_LO2_Step, state->AS_Data.f_ref); 1621 state->AS_Data.f_LO2 = 1622 MT2063_CalcLO2Mult(&LO2, &Num2, state->AS_Data.f_LO2, 1623 state->AS_Data.f_LO2_Step, state->AS_Data.f_ref); 1624 1625 /* 1626 * Check the upconverter and downconverter frequency ranges 1627 */ 1628 if ((state->AS_Data.f_LO1 < MT2063_MIN_UPC_FREQ) 1629 || (state->AS_Data.f_LO1 > MT2063_MAX_UPC_FREQ)) 1630 status |= MT2063_UPC_RANGE; 1631 if ((state->AS_Data.f_LO2 < MT2063_MIN_DNC_FREQ) 1632 || (state->AS_Data.f_LO2 > MT2063_MAX_DNC_FREQ)) 1633 status |= MT2063_DNC_RANGE; 1634 /* LO2 Lock bit was in a different place for B0 version */ 1635 if (state->tuner_id == MT2063_B0) 1636 LO2LK = 0x40; 1637 1638 /* 1639 * If we have the same LO frequencies and we're already locked, 1640 * then skip re-programming the LO registers. 1641 */ 1642 if ((ofLO1 != state->AS_Data.f_LO1) 1643 || (ofLO2 != state->AS_Data.f_LO2) 1644 || ((state->reg[MT2063_REG_LO_STATUS] & (LO1LK | LO2LK)) != 1645 (LO1LK | LO2LK))) { 1646 /* 1647 * Calculate the FIFFOF register value 1648 * 1649 * IF1_Actual 1650 * FIFFOF = ------------ - 8 * FIFFC - 4992 1651 * f_ref/64 1652 */ 1653 fiffof = 1654 (state->AS_Data.f_LO1 - 1655 f_in) / (state->AS_Data.f_ref / 64) - 8 * (u32) fiffc - 1656 4992; 1657 if (fiffof > 0xFF) 1658 fiffof = 0xFF; 1659 1660 /* 1661 * Place all of the calculated values into the local tuner 1662 * register fields. 1663 */ 1664 if (status >= 0) { 1665 state->reg[MT2063_REG_LO1CQ_1] = (u8) (LO1 & 0xFF); /* DIV1q */ 1666 state->reg[MT2063_REG_LO1CQ_2] = (u8) (Num1 & 0x3F); /* NUM1q */ 1667 state->reg[MT2063_REG_LO2CQ_1] = (u8) (((LO2 & 0x7F) << 1) /* DIV2q */ 1668 |(Num2 >> 12)); /* NUM2q (hi) */ 1669 state->reg[MT2063_REG_LO2CQ_2] = (u8) ((Num2 & 0x0FF0) >> 4); /* NUM2q (mid) */ 1670 state->reg[MT2063_REG_LO2CQ_3] = (u8) (0xE0 | (Num2 & 0x000F)); /* NUM2q (lo) */ 1671 1672 /* 1673 * Now write out the computed register values 1674 * IMPORTANT: There is a required order for writing 1675 * (0x05 must follow all the others). 1676 */ 1677 status |= mt2063_write(state, MT2063_REG_LO1CQ_1, &state->reg[MT2063_REG_LO1CQ_1], 5); /* 0x01 - 0x05 */ 1678 if (state->tuner_id == MT2063_B0) { 1679 /* Re-write the one-shot bits to trigger the tune operation */ 1680 status |= mt2063_write(state, MT2063_REG_LO2CQ_3, &state->reg[MT2063_REG_LO2CQ_3], 1); /* 0x05 */ 1681 } 1682 /* Write out the FIFF offset only if it's changing */ 1683 if (state->reg[MT2063_REG_FIFF_OFFSET] != 1684 (u8) fiffof) { 1685 state->reg[MT2063_REG_FIFF_OFFSET] = 1686 (u8) fiffof; 1687 status |= 1688 mt2063_write(state, 1689 MT2063_REG_FIFF_OFFSET, 1690 &state-> 1691 reg[MT2063_REG_FIFF_OFFSET], 1692 1); 1693 } 1694 } 1695 1696 /* 1697 * Check for LO's locking 1698 */ 1699 1700 if (status < 0) 1701 return status; 1702 1703 status = mt2063_lockStatus(state); 1704 if (status < 0) 1705 return status; 1706 if (!status) 1707 return -EINVAL; /* Couldn't lock */ 1708 1709 /* 1710 * If we locked OK, assign calculated data to mt2063_state structure 1711 */ 1712 state->f_IF1_actual = state->AS_Data.f_LO1 - f_in; 1713 } 1714 1715 return status; 1716 } 1717 1718 static const u8 MT2063B0_defaults[] = { 1719 /* Reg, Value */ 1720 0x19, 0x05, 1721 0x1B, 0x1D, 1722 0x1C, 0x1F, 1723 0x1D, 0x0F, 1724 0x1E, 0x3F, 1725 0x1F, 0x0F, 1726 0x20, 0x3F, 1727 0x22, 0x21, 1728 0x23, 0x3F, 1729 0x24, 0x20, 1730 0x25, 0x3F, 1731 0x27, 0xEE, 1732 0x2C, 0x27, /* bit at 0x20 is cleared below */ 1733 0x30, 0x03, 1734 0x2C, 0x07, /* bit at 0x20 is cleared here */ 1735 0x2D, 0x87, 1736 0x2E, 0xAA, 1737 0x28, 0xE1, /* Set the FIFCrst bit here */ 1738 0x28, 0xE0, /* Clear the FIFCrst bit here */ 1739 0x00 1740 }; 1741 1742 /* writing 0x05 0xf0 sw-resets all registers, so we write only needed changes */ 1743 static const u8 MT2063B1_defaults[] = { 1744 /* Reg, Value */ 1745 0x05, 0xF0, 1746 0x11, 0x10, /* New Enable AFCsd */ 1747 0x19, 0x05, 1748 0x1A, 0x6C, 1749 0x1B, 0x24, 1750 0x1C, 0x28, 1751 0x1D, 0x8F, 1752 0x1E, 0x14, 1753 0x1F, 0x8F, 1754 0x20, 0x57, 1755 0x22, 0x21, /* New - ver 1.03 */ 1756 0x23, 0x3C, /* New - ver 1.10 */ 1757 0x24, 0x20, /* New - ver 1.03 */ 1758 0x2C, 0x24, /* bit at 0x20 is cleared below */ 1759 0x2D, 0x87, /* FIFFQ=0 */ 1760 0x2F, 0xF3, 1761 0x30, 0x0C, /* New - ver 1.11 */ 1762 0x31, 0x1B, /* New - ver 1.11 */ 1763 0x2C, 0x04, /* bit at 0x20 is cleared here */ 1764 0x28, 0xE1, /* Set the FIFCrst bit here */ 1765 0x28, 0xE0, /* Clear the FIFCrst bit here */ 1766 0x00 1767 }; 1768 1769 /* writing 0x05 0xf0 sw-resets all registers, so we write only needed changes */ 1770 static const u8 MT2063B3_defaults[] = { 1771 /* Reg, Value */ 1772 0x05, 0xF0, 1773 0x19, 0x3D, 1774 0x2C, 0x24, /* bit at 0x20 is cleared below */ 1775 0x2C, 0x04, /* bit at 0x20 is cleared here */ 1776 0x28, 0xE1, /* Set the FIFCrst bit here */ 1777 0x28, 0xE0, /* Clear the FIFCrst bit here */ 1778 0x00 1779 }; 1780 1781 static int mt2063_init(struct dvb_frontend *fe) 1782 { 1783 int status; 1784 struct mt2063_state *state = fe->tuner_priv; 1785 u8 all_resets = 0xF0; /* reset/load bits */ 1786 const u8 *def = NULL; 1787 char *step; 1788 u32 FCRUN; 1789 s32 maxReads; 1790 u32 fcu_osc; 1791 u32 i; 1792 1793 dprintk(2, "\n"); 1794 1795 state->rcvr_mode = MT2063_CABLE_QAM; 1796 1797 /* Read the Part/Rev code from the tuner */ 1798 status = mt2063_read(state, MT2063_REG_PART_REV, 1799 &state->reg[MT2063_REG_PART_REV], 1); 1800 if (status < 0) { 1801 printk(KERN_ERR "Can't read mt2063 part ID\n"); 1802 return status; 1803 } 1804 1805 /* Check the part/rev code */ 1806 switch (state->reg[MT2063_REG_PART_REV]) { 1807 case MT2063_B0: 1808 step = "B0"; 1809 break; 1810 case MT2063_B1: 1811 step = "B1"; 1812 break; 1813 case MT2063_B2: 1814 step = "B2"; 1815 break; 1816 case MT2063_B3: 1817 step = "B3"; 1818 break; 1819 default: 1820 printk(KERN_ERR "mt2063: Unknown mt2063 device ID (0x%02x)\n", 1821 state->reg[MT2063_REG_PART_REV]); 1822 return -ENODEV; /* Wrong tuner Part/Rev code */ 1823 } 1824 1825 /* Check the 2nd byte of the Part/Rev code from the tuner */ 1826 status = mt2063_read(state, MT2063_REG_RSVD_3B, 1827 &state->reg[MT2063_REG_RSVD_3B], 1); 1828 1829 /* b7 != 0 ==> NOT MT2063 */ 1830 if (status < 0 || ((state->reg[MT2063_REG_RSVD_3B] & 0x80) != 0x00)) { 1831 printk(KERN_ERR "mt2063: Unknown part ID (0x%02x%02x)\n", 1832 state->reg[MT2063_REG_PART_REV], 1833 state->reg[MT2063_REG_RSVD_3B]); 1834 return -ENODEV; /* Wrong tuner Part/Rev code */ 1835 } 1836 1837 printk(KERN_INFO "mt2063: detected a mt2063 %s\n", step); 1838 1839 /* Reset the tuner */ 1840 status = mt2063_write(state, MT2063_REG_LO2CQ_3, &all_resets, 1); 1841 if (status < 0) 1842 return status; 1843 1844 /* change all of the default values that vary from the HW reset values */ 1845 /* def = (state->reg[PART_REV] == MT2063_B0) ? MT2063B0_defaults : MT2063B1_defaults; */ 1846 switch (state->reg[MT2063_REG_PART_REV]) { 1847 case MT2063_B3: 1848 def = MT2063B3_defaults; 1849 break; 1850 1851 case MT2063_B1: 1852 def = MT2063B1_defaults; 1853 break; 1854 1855 case MT2063_B0: 1856 def = MT2063B0_defaults; 1857 break; 1858 1859 default: 1860 return -ENODEV; 1861 break; 1862 } 1863 1864 while (status >= 0 && *def) { 1865 u8 reg = *def++; 1866 u8 val = *def++; 1867 status = mt2063_write(state, reg, &val, 1); 1868 } 1869 if (status < 0) 1870 return status; 1871 1872 /* Wait for FIFF location to complete. */ 1873 FCRUN = 1; 1874 maxReads = 10; 1875 while (status >= 0 && (FCRUN != 0) && (maxReads-- > 0)) { 1876 msleep(2); 1877 status = mt2063_read(state, 1878 MT2063_REG_XO_STATUS, 1879 &state-> 1880 reg[MT2063_REG_XO_STATUS], 1); 1881 FCRUN = (state->reg[MT2063_REG_XO_STATUS] & 0x40) >> 6; 1882 } 1883 1884 if (FCRUN != 0 || status < 0) 1885 return -ENODEV; 1886 1887 status = mt2063_read(state, 1888 MT2063_REG_FIFFC, 1889 &state->reg[MT2063_REG_FIFFC], 1); 1890 if (status < 0) 1891 return status; 1892 1893 /* Read back all the registers from the tuner */ 1894 status = mt2063_read(state, 1895 MT2063_REG_PART_REV, 1896 state->reg, MT2063_REG_END_REGS); 1897 if (status < 0) 1898 return status; 1899 1900 /* Initialize the tuner state. */ 1901 state->tuner_id = state->reg[MT2063_REG_PART_REV]; 1902 state->AS_Data.f_ref = MT2063_REF_FREQ; 1903 state->AS_Data.f_if1_Center = (state->AS_Data.f_ref / 8) * 1904 ((u32) state->reg[MT2063_REG_FIFFC] + 640); 1905 state->AS_Data.f_if1_bw = MT2063_IF1_BW; 1906 state->AS_Data.f_out = 43750000UL; 1907 state->AS_Data.f_out_bw = 6750000UL; 1908 state->AS_Data.f_zif_bw = MT2063_ZIF_BW; 1909 state->AS_Data.f_LO1_Step = state->AS_Data.f_ref / 64; 1910 state->AS_Data.f_LO2_Step = MT2063_TUNE_STEP_SIZE; 1911 state->AS_Data.maxH1 = MT2063_MAX_HARMONICS_1; 1912 state->AS_Data.maxH2 = MT2063_MAX_HARMONICS_2; 1913 state->AS_Data.f_min_LO_Separation = MT2063_MIN_LO_SEP; 1914 state->AS_Data.f_if1_Request = state->AS_Data.f_if1_Center; 1915 state->AS_Data.f_LO1 = 2181000000UL; 1916 state->AS_Data.f_LO2 = 1486249786UL; 1917 state->f_IF1_actual = state->AS_Data.f_if1_Center; 1918 state->AS_Data.f_in = state->AS_Data.f_LO1 - state->f_IF1_actual; 1919 state->AS_Data.f_LO1_FracN_Avoid = MT2063_LO1_FRACN_AVOID; 1920 state->AS_Data.f_LO2_FracN_Avoid = MT2063_LO2_FRACN_AVOID; 1921 state->num_regs = MT2063_REG_END_REGS; 1922 state->AS_Data.avoidDECT = MT2063_AVOID_BOTH; 1923 state->ctfilt_sw = 0; 1924 1925 state->CTFiltMax[0] = 69230000; 1926 state->CTFiltMax[1] = 105770000; 1927 state->CTFiltMax[2] = 140350000; 1928 state->CTFiltMax[3] = 177110000; 1929 state->CTFiltMax[4] = 212860000; 1930 state->CTFiltMax[5] = 241130000; 1931 state->CTFiltMax[6] = 274370000; 1932 state->CTFiltMax[7] = 309820000; 1933 state->CTFiltMax[8] = 342450000; 1934 state->CTFiltMax[9] = 378870000; 1935 state->CTFiltMax[10] = 416210000; 1936 state->CTFiltMax[11] = 456500000; 1937 state->CTFiltMax[12] = 495790000; 1938 state->CTFiltMax[13] = 534530000; 1939 state->CTFiltMax[14] = 572610000; 1940 state->CTFiltMax[15] = 598970000; 1941 state->CTFiltMax[16] = 635910000; 1942 state->CTFiltMax[17] = 672130000; 1943 state->CTFiltMax[18] = 714840000; 1944 state->CTFiltMax[19] = 739660000; 1945 state->CTFiltMax[20] = 770410000; 1946 state->CTFiltMax[21] = 814660000; 1947 state->CTFiltMax[22] = 846950000; 1948 state->CTFiltMax[23] = 867820000; 1949 state->CTFiltMax[24] = 915980000; 1950 state->CTFiltMax[25] = 947450000; 1951 state->CTFiltMax[26] = 983110000; 1952 state->CTFiltMax[27] = 1021630000; 1953 state->CTFiltMax[28] = 1061870000; 1954 state->CTFiltMax[29] = 1098330000; 1955 state->CTFiltMax[30] = 1138990000; 1956 1957 /* 1958 ** Fetch the FCU osc value and use it and the fRef value to 1959 ** scale all of the Band Max values 1960 */ 1961 1962 state->reg[MT2063_REG_CTUNE_CTRL] = 0x0A; 1963 status = mt2063_write(state, MT2063_REG_CTUNE_CTRL, 1964 &state->reg[MT2063_REG_CTUNE_CTRL], 1); 1965 if (status < 0) 1966 return status; 1967 1968 /* Read the ClearTune filter calibration value */ 1969 status = mt2063_read(state, MT2063_REG_FIFFC, 1970 &state->reg[MT2063_REG_FIFFC], 1); 1971 if (status < 0) 1972 return status; 1973 1974 fcu_osc = state->reg[MT2063_REG_FIFFC]; 1975 1976 state->reg[MT2063_REG_CTUNE_CTRL] = 0x00; 1977 status = mt2063_write(state, MT2063_REG_CTUNE_CTRL, 1978 &state->reg[MT2063_REG_CTUNE_CTRL], 1); 1979 if (status < 0) 1980 return status; 1981 1982 /* Adjust each of the values in the ClearTune filter cross-over table */ 1983 for (i = 0; i < 31; i++) 1984 state->CTFiltMax[i] = (state->CTFiltMax[i] / 768) * (fcu_osc + 640); 1985 1986 status = MT2063_SoftwareShutdown(state, 1); 1987 if (status < 0) 1988 return status; 1989 status = MT2063_ClearPowerMaskBits(state, MT2063_ALL_SD); 1990 if (status < 0) 1991 return status; 1992 1993 state->init = true; 1994 1995 return 0; 1996 } 1997 1998 static int mt2063_get_status(struct dvb_frontend *fe, u32 *tuner_status) 1999 { 2000 struct mt2063_state *state = fe->tuner_priv; 2001 int status; 2002 2003 dprintk(2, "\n"); 2004 2005 if (!state->init) 2006 return -ENODEV; 2007 2008 *tuner_status = 0; 2009 status = mt2063_lockStatus(state); 2010 if (status < 0) 2011 return status; 2012 if (status) 2013 *tuner_status = TUNER_STATUS_LOCKED; 2014 2015 dprintk(1, "Tuner status: %d", *tuner_status); 2016 2017 return 0; 2018 } 2019 2020 static void mt2063_release(struct dvb_frontend *fe) 2021 { 2022 struct mt2063_state *state = fe->tuner_priv; 2023 2024 dprintk(2, "\n"); 2025 2026 fe->tuner_priv = NULL; 2027 kfree(state); 2028 } 2029 2030 static int mt2063_set_analog_params(struct dvb_frontend *fe, 2031 struct analog_parameters *params) 2032 { 2033 struct mt2063_state *state = fe->tuner_priv; 2034 s32 pict_car; 2035 s32 pict2chanb_vsb; 2036 s32 ch_bw; 2037 s32 if_mid; 2038 s32 rcvr_mode; 2039 int status; 2040 2041 dprintk(2, "\n"); 2042 2043 if (!state->init) { 2044 status = mt2063_init(fe); 2045 if (status < 0) 2046 return status; 2047 } 2048 2049 switch (params->mode) { 2050 case V4L2_TUNER_RADIO: 2051 pict_car = 38900000; 2052 ch_bw = 8000000; 2053 pict2chanb_vsb = -(ch_bw / 2); 2054 rcvr_mode = MT2063_OFFAIR_ANALOG; 2055 break; 2056 case V4L2_TUNER_ANALOG_TV: 2057 rcvr_mode = MT2063_CABLE_ANALOG; 2058 if (params->std & ~V4L2_STD_MN) { 2059 pict_car = 38900000; 2060 ch_bw = 6000000; 2061 pict2chanb_vsb = -1250000; 2062 } else if (params->std & V4L2_STD_PAL_G) { 2063 pict_car = 38900000; 2064 ch_bw = 7000000; 2065 pict2chanb_vsb = -1250000; 2066 } else { /* PAL/SECAM standards */ 2067 pict_car = 38900000; 2068 ch_bw = 8000000; 2069 pict2chanb_vsb = -1250000; 2070 } 2071 break; 2072 default: 2073 return -EINVAL; 2074 } 2075 if_mid = pict_car - (pict2chanb_vsb + (ch_bw / 2)); 2076 2077 state->AS_Data.f_LO2_Step = 125000; /* FIXME: probably 5000 for FM */ 2078 state->AS_Data.f_out = if_mid; 2079 state->AS_Data.f_out_bw = ch_bw + 750000; 2080 status = MT2063_SetReceiverMode(state, rcvr_mode); 2081 if (status < 0) 2082 return status; 2083 2084 dprintk(1, "Tuning to frequency: %d, bandwidth %d, foffset %d\n", 2085 params->frequency, ch_bw, pict2chanb_vsb); 2086 2087 status = MT2063_Tune(state, (params->frequency + (pict2chanb_vsb + (ch_bw / 2)))); 2088 if (status < 0) 2089 return status; 2090 2091 state->frequency = params->frequency; 2092 return 0; 2093 } 2094 2095 /* 2096 * As defined on EN 300 429, the DVB-C roll-off factor is 0.15. 2097 * So, the amount of the needed bandwidth is given by: 2098 * Bw = Symbol_rate * (1 + 0.15) 2099 * As such, the maximum symbol rate supported by 6 MHz is given by: 2100 * max_symbol_rate = 6 MHz / 1.15 = 5217391 Bauds 2101 */ 2102 #define MAX_SYMBOL_RATE_6MHz 5217391 2103 2104 static int mt2063_set_params(struct dvb_frontend *fe) 2105 { 2106 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 2107 struct mt2063_state *state = fe->tuner_priv; 2108 int status; 2109 s32 pict_car; 2110 s32 pict2chanb_vsb; 2111 s32 ch_bw; 2112 s32 if_mid; 2113 s32 rcvr_mode; 2114 2115 if (!state->init) { 2116 status = mt2063_init(fe); 2117 if (status < 0) 2118 return status; 2119 } 2120 2121 dprintk(2, "\n"); 2122 2123 if (c->bandwidth_hz == 0) 2124 return -EINVAL; 2125 if (c->bandwidth_hz <= 6000000) 2126 ch_bw = 6000000; 2127 else if (c->bandwidth_hz <= 7000000) 2128 ch_bw = 7000000; 2129 else 2130 ch_bw = 8000000; 2131 2132 switch (c->delivery_system) { 2133 case SYS_DVBT: 2134 rcvr_mode = MT2063_OFFAIR_COFDM; 2135 pict_car = 36125000; 2136 pict2chanb_vsb = -(ch_bw / 2); 2137 break; 2138 case SYS_DVBC_ANNEX_A: 2139 case SYS_DVBC_ANNEX_C: 2140 rcvr_mode = MT2063_CABLE_QAM; 2141 pict_car = 36125000; 2142 pict2chanb_vsb = -(ch_bw / 2); 2143 break; 2144 default: 2145 return -EINVAL; 2146 } 2147 if_mid = pict_car - (pict2chanb_vsb + (ch_bw / 2)); 2148 2149 state->AS_Data.f_LO2_Step = 125000; /* FIXME: probably 5000 for FM */ 2150 state->AS_Data.f_out = if_mid; 2151 state->AS_Data.f_out_bw = ch_bw + 750000; 2152 status = MT2063_SetReceiverMode(state, rcvr_mode); 2153 if (status < 0) 2154 return status; 2155 2156 dprintk(1, "Tuning to frequency: %d, bandwidth %d, foffset %d\n", 2157 c->frequency, ch_bw, pict2chanb_vsb); 2158 2159 status = MT2063_Tune(state, (c->frequency + (pict2chanb_vsb + (ch_bw / 2)))); 2160 2161 if (status < 0) 2162 return status; 2163 2164 state->frequency = c->frequency; 2165 return 0; 2166 } 2167 2168 static int mt2063_get_if_frequency(struct dvb_frontend *fe, u32 *freq) 2169 { 2170 struct mt2063_state *state = fe->tuner_priv; 2171 2172 dprintk(2, "\n"); 2173 2174 if (!state->init) 2175 return -ENODEV; 2176 2177 *freq = state->AS_Data.f_out; 2178 2179 dprintk(1, "IF frequency: %d\n", *freq); 2180 2181 return 0; 2182 } 2183 2184 static int mt2063_get_bandwidth(struct dvb_frontend *fe, u32 *bw) 2185 { 2186 struct mt2063_state *state = fe->tuner_priv; 2187 2188 dprintk(2, "\n"); 2189 2190 if (!state->init) 2191 return -ENODEV; 2192 2193 *bw = state->AS_Data.f_out_bw - 750000; 2194 2195 dprintk(1, "bandwidth: %d\n", *bw); 2196 2197 return 0; 2198 } 2199 2200 static const struct dvb_tuner_ops mt2063_ops = { 2201 .info = { 2202 .name = "MT2063 Silicon Tuner", 2203 .frequency_min_hz = 45 * MHz, 2204 .frequency_max_hz = 865 * MHz, 2205 }, 2206 2207 .init = mt2063_init, 2208 .sleep = MT2063_Sleep, 2209 .get_status = mt2063_get_status, 2210 .set_analog_params = mt2063_set_analog_params, 2211 .set_params = mt2063_set_params, 2212 .get_if_frequency = mt2063_get_if_frequency, 2213 .get_bandwidth = mt2063_get_bandwidth, 2214 .release = mt2063_release, 2215 }; 2216 2217 struct dvb_frontend *mt2063_attach(struct dvb_frontend *fe, 2218 struct mt2063_config *config, 2219 struct i2c_adapter *i2c) 2220 { 2221 struct mt2063_state *state = NULL; 2222 2223 dprintk(2, "\n"); 2224 2225 state = kzalloc(sizeof(struct mt2063_state), GFP_KERNEL); 2226 if (!state) 2227 return NULL; 2228 2229 state->config = config; 2230 state->i2c = i2c; 2231 state->frontend = fe; 2232 state->reference = config->refclock / 1000; /* kHz */ 2233 fe->tuner_priv = state; 2234 fe->ops.tuner_ops = mt2063_ops; 2235 2236 printk(KERN_INFO "%s: Attaching MT2063\n", __func__); 2237 return fe; 2238 } 2239 EXPORT_SYMBOL_GPL(mt2063_attach); 2240 2241 #if 0 2242 /* 2243 * Ancillary routines visible outside mt2063 2244 * FIXME: Remove them in favor of using standard tuner callbacks 2245 */ 2246 static int tuner_MT2063_SoftwareShutdown(struct dvb_frontend *fe) 2247 { 2248 struct mt2063_state *state = fe->tuner_priv; 2249 int err = 0; 2250 2251 dprintk(2, "\n"); 2252 2253 err = MT2063_SoftwareShutdown(state, 1); 2254 if (err < 0) 2255 printk(KERN_ERR "%s: Couldn't shutdown\n", __func__); 2256 2257 return err; 2258 } 2259 2260 static int tuner_MT2063_ClearPowerMaskBits(struct dvb_frontend *fe) 2261 { 2262 struct mt2063_state *state = fe->tuner_priv; 2263 int err = 0; 2264 2265 dprintk(2, "\n"); 2266 2267 err = MT2063_ClearPowerMaskBits(state, MT2063_ALL_SD); 2268 if (err < 0) 2269 printk(KERN_ERR "%s: Invalid parameter\n", __func__); 2270 2271 return err; 2272 } 2273 #endif 2274 2275 MODULE_AUTHOR("Mauro Carvalho Chehab"); 2276 MODULE_DESCRIPTION("MT2063 Silicon tuner"); 2277 MODULE_LICENSE("GPL"); 2278