1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Streamzap Remote Control driver 4 * 5 * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de> 6 * Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com> 7 * 8 * This driver was based on the work of Greg Wickham and Adrian 9 * Dewhurst. It was substantially rewritten to support correct signal 10 * gaps and now maintains a delay buffer, which is used to present 11 * consistent timing behaviour to user space applications. Without the 12 * delay buffer an ugly hack would be required in lircd, which can 13 * cause sluggish signal decoding in certain situations. 14 * 15 * Ported to in-kernel ir-core interface by Jarod Wilson 16 * 17 * This driver is based on the USB skeleton driver packaged with the 18 * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com) 19 */ 20 21 #include <linux/device.h> 22 #include <linux/module.h> 23 #include <linux/slab.h> 24 #include <linux/usb.h> 25 #include <linux/usb/input.h> 26 #include <media/rc-core.h> 27 28 #define DRIVER_NAME "streamzap" 29 #define DRIVER_DESC "Streamzap Remote Control driver" 30 31 #define USB_STREAMZAP_VENDOR_ID 0x0e9c 32 #define USB_STREAMZAP_PRODUCT_ID 0x0000 33 34 /* table of devices that work with this driver */ 35 static const struct usb_device_id streamzap_table[] = { 36 /* Streamzap Remote Control */ 37 { USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) }, 38 /* Terminating entry */ 39 { } 40 }; 41 42 MODULE_DEVICE_TABLE(usb, streamzap_table); 43 44 #define SZ_PULSE_MASK 0xf0 45 #define SZ_SPACE_MASK 0x0f 46 #define SZ_TIMEOUT 0xff 47 #define SZ_RESOLUTION 256 48 49 /* number of samples buffered */ 50 #define SZ_BUF_LEN 128 51 52 enum StreamzapDecoderState { 53 PulseSpace, 54 FullPulse, 55 FullSpace, 56 IgnorePulse 57 }; 58 59 /* structure to hold our device specific stuff */ 60 struct streamzap_ir { 61 /* ir-core */ 62 struct rc_dev *rdev; 63 64 /* core device info */ 65 struct device *dev; 66 67 /* usb */ 68 struct urb *urb_in; 69 70 /* buffer & dma */ 71 unsigned char *buf_in; 72 dma_addr_t dma_in; 73 unsigned int buf_in_len; 74 75 /* track what state we're in */ 76 enum StreamzapDecoderState decoder_state; 77 78 char phys[64]; 79 }; 80 81 82 /* local function prototypes */ 83 static int streamzap_probe(struct usb_interface *interface, 84 const struct usb_device_id *id); 85 static void streamzap_disconnect(struct usb_interface *interface); 86 static void streamzap_callback(struct urb *urb); 87 static int streamzap_suspend(struct usb_interface *intf, pm_message_t message); 88 static int streamzap_resume(struct usb_interface *intf); 89 90 /* usb specific object needed to register this driver with the usb subsystem */ 91 static struct usb_driver streamzap_driver = { 92 .name = DRIVER_NAME, 93 .probe = streamzap_probe, 94 .disconnect = streamzap_disconnect, 95 .suspend = streamzap_suspend, 96 .resume = streamzap_resume, 97 .id_table = streamzap_table, 98 }; 99 100 static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir) 101 { 102 dev_dbg(sz->dev, "Storing %s with duration %u us\n", 103 (rawir.pulse ? "pulse" : "space"), rawir.duration); 104 ir_raw_event_store_with_filter(sz->rdev, &rawir); 105 } 106 107 static void sz_push_full_pulse(struct streamzap_ir *sz, 108 unsigned char value) 109 { 110 struct ir_raw_event rawir = { 111 .pulse = true, 112 .duration = value * SZ_RESOLUTION + SZ_RESOLUTION / 2, 113 }; 114 115 sz_push(sz, rawir); 116 } 117 118 static void sz_push_half_pulse(struct streamzap_ir *sz, 119 unsigned char value) 120 { 121 sz_push_full_pulse(sz, (value & SZ_PULSE_MASK) >> 4); 122 } 123 124 static void sz_push_full_space(struct streamzap_ir *sz, 125 unsigned char value) 126 { 127 struct ir_raw_event rawir = { 128 .pulse = false, 129 .duration = value * SZ_RESOLUTION + SZ_RESOLUTION / 2, 130 }; 131 132 sz_push(sz, rawir); 133 } 134 135 static void sz_push_half_space(struct streamzap_ir *sz, 136 unsigned long value) 137 { 138 sz_push_full_space(sz, value & SZ_SPACE_MASK); 139 } 140 141 /* 142 * streamzap_callback - usb IRQ handler callback 143 * 144 * This procedure is invoked on reception of data from 145 * the usb remote. 146 */ 147 static void streamzap_callback(struct urb *urb) 148 { 149 struct streamzap_ir *sz; 150 unsigned int i; 151 int len; 152 153 if (!urb) 154 return; 155 156 sz = urb->context; 157 len = urb->actual_length; 158 159 switch (urb->status) { 160 case -ECONNRESET: 161 case -ENOENT: 162 case -ESHUTDOWN: 163 /* 164 * this urb is terminated, clean up. 165 * sz might already be invalid at this point 166 */ 167 dev_err(sz->dev, "urb terminated, status: %d\n", urb->status); 168 return; 169 default: 170 break; 171 } 172 173 dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len); 174 for (i = 0; i < len; i++) { 175 dev_dbg(sz->dev, "sz->buf_in[%d]: %x\n", 176 i, (unsigned char)sz->buf_in[i]); 177 switch (sz->decoder_state) { 178 case PulseSpace: 179 if ((sz->buf_in[i] & SZ_PULSE_MASK) == 180 SZ_PULSE_MASK) { 181 sz->decoder_state = FullPulse; 182 continue; 183 } else if ((sz->buf_in[i] & SZ_SPACE_MASK) 184 == SZ_SPACE_MASK) { 185 sz_push_half_pulse(sz, sz->buf_in[i]); 186 sz->decoder_state = FullSpace; 187 continue; 188 } else { 189 sz_push_half_pulse(sz, sz->buf_in[i]); 190 sz_push_half_space(sz, sz->buf_in[i]); 191 } 192 break; 193 case FullPulse: 194 sz_push_full_pulse(sz, sz->buf_in[i]); 195 sz->decoder_state = IgnorePulse; 196 break; 197 case FullSpace: 198 if (sz->buf_in[i] == SZ_TIMEOUT) { 199 struct ir_raw_event rawir = { 200 .pulse = false, 201 .duration = sz->rdev->timeout 202 }; 203 sz_push(sz, rawir); 204 } else { 205 sz_push_full_space(sz, sz->buf_in[i]); 206 } 207 sz->decoder_state = PulseSpace; 208 break; 209 case IgnorePulse: 210 if ((sz->buf_in[i] & SZ_SPACE_MASK) == 211 SZ_SPACE_MASK) { 212 sz->decoder_state = FullSpace; 213 continue; 214 } 215 sz_push_half_space(sz, sz->buf_in[i]); 216 sz->decoder_state = PulseSpace; 217 break; 218 } 219 } 220 221 ir_raw_event_handle(sz->rdev); 222 usb_submit_urb(urb, GFP_ATOMIC); 223 } 224 225 static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz, 226 struct usb_device *usbdev) 227 { 228 struct rc_dev *rdev; 229 struct device *dev = sz->dev; 230 int ret; 231 232 rdev = rc_allocate_device(RC_DRIVER_IR_RAW); 233 if (!rdev) 234 goto out; 235 236 usb_make_path(usbdev, sz->phys, sizeof(sz->phys)); 237 strlcat(sz->phys, "/input0", sizeof(sz->phys)); 238 239 rdev->device_name = "Streamzap PC Remote Infrared Receiver"; 240 rdev->input_phys = sz->phys; 241 usb_to_input_id(usbdev, &rdev->input_id); 242 rdev->dev.parent = dev; 243 rdev->priv = sz; 244 rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER; 245 rdev->driver_name = DRIVER_NAME; 246 rdev->map_name = RC_MAP_STREAMZAP; 247 rdev->rx_resolution = SZ_RESOLUTION; 248 249 ret = rc_register_device(rdev); 250 if (ret < 0) { 251 dev_err(dev, "remote input device register failed\n"); 252 goto out; 253 } 254 255 return rdev; 256 257 out: 258 rc_free_device(rdev); 259 return NULL; 260 } 261 262 /* 263 * streamzap_probe 264 * 265 * Called by usb-core to associated with a candidate device 266 * On any failure the return value is the ERROR 267 * On success return 0 268 */ 269 static int streamzap_probe(struct usb_interface *intf, 270 const struct usb_device_id *id) 271 { 272 struct usb_device *usbdev = interface_to_usbdev(intf); 273 struct usb_endpoint_descriptor *endpoint; 274 struct usb_host_interface *iface_host; 275 struct streamzap_ir *sz = NULL; 276 int retval = -ENOMEM; 277 int pipe, maxp; 278 279 /* Allocate space for device driver specific data */ 280 sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL); 281 if (!sz) 282 return -ENOMEM; 283 284 /* Check to ensure endpoint information matches requirements */ 285 iface_host = intf->cur_altsetting; 286 287 if (iface_host->desc.bNumEndpoints != 1) { 288 dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n", 289 __func__, iface_host->desc.bNumEndpoints); 290 retval = -ENODEV; 291 goto free_sz; 292 } 293 294 endpoint = &iface_host->endpoint[0].desc; 295 if (!usb_endpoint_dir_in(endpoint)) { 296 dev_err(&intf->dev, "%s: endpoint doesn't match input device 02%02x\n", 297 __func__, endpoint->bEndpointAddress); 298 retval = -ENODEV; 299 goto free_sz; 300 } 301 302 if (!usb_endpoint_xfer_int(endpoint)) { 303 dev_err(&intf->dev, "%s: endpoint attributes don't match xfer 02%02x\n", 304 __func__, endpoint->bmAttributes); 305 retval = -ENODEV; 306 goto free_sz; 307 } 308 309 pipe = usb_rcvintpipe(usbdev, endpoint->bEndpointAddress); 310 maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe)); 311 312 if (maxp == 0) { 313 dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n", 314 __func__); 315 retval = -ENODEV; 316 goto free_sz; 317 } 318 319 /* Allocate the USB buffer and IRQ URB */ 320 sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in); 321 if (!sz->buf_in) 322 goto free_sz; 323 324 sz->urb_in = usb_alloc_urb(0, GFP_KERNEL); 325 if (!sz->urb_in) 326 goto free_buf_in; 327 328 sz->dev = &intf->dev; 329 sz->buf_in_len = maxp; 330 331 sz->rdev = streamzap_init_rc_dev(sz, usbdev); 332 if (!sz->rdev) 333 goto rc_dev_fail; 334 335 sz->decoder_state = PulseSpace; 336 /* FIXME: don't yet have a way to set this */ 337 sz->rdev->timeout = SZ_TIMEOUT * SZ_RESOLUTION; 338 #if 0 339 /* not yet supported, depends on patches from maxim */ 340 /* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */ 341 sz->min_timeout = SZ_TIMEOUT * SZ_RESOLUTION; 342 sz->max_timeout = SZ_TIMEOUT * SZ_RESOLUTION; 343 #endif 344 345 /* Complete final initialisations */ 346 usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in, 347 maxp, streamzap_callback, sz, endpoint->bInterval); 348 sz->urb_in->transfer_dma = sz->dma_in; 349 sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; 350 351 usb_set_intfdata(intf, sz); 352 353 if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) 354 dev_err(sz->dev, "urb submit failed\n"); 355 356 return 0; 357 358 rc_dev_fail: 359 usb_free_urb(sz->urb_in); 360 free_buf_in: 361 usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in); 362 free_sz: 363 kfree(sz); 364 365 return retval; 366 } 367 368 /* 369 * streamzap_disconnect 370 * 371 * Called by the usb core when the device is removed from the system. 372 * 373 * This routine guarantees that the driver will not submit any more urbs 374 * by clearing dev->usbdev. It is also supposed to terminate any currently 375 * active urbs. Unfortunately, usb_bulk_msg(), used in streamzap_read(), 376 * does not provide any way to do this. 377 */ 378 static void streamzap_disconnect(struct usb_interface *interface) 379 { 380 struct streamzap_ir *sz = usb_get_intfdata(interface); 381 struct usb_device *usbdev = interface_to_usbdev(interface); 382 383 usb_set_intfdata(interface, NULL); 384 385 if (!sz) 386 return; 387 388 rc_unregister_device(sz->rdev); 389 usb_kill_urb(sz->urb_in); 390 usb_free_urb(sz->urb_in); 391 usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in); 392 393 kfree(sz); 394 } 395 396 static int streamzap_suspend(struct usb_interface *intf, pm_message_t message) 397 { 398 struct streamzap_ir *sz = usb_get_intfdata(intf); 399 400 usb_kill_urb(sz->urb_in); 401 402 return 0; 403 } 404 405 static int streamzap_resume(struct usb_interface *intf) 406 { 407 struct streamzap_ir *sz = usb_get_intfdata(intf); 408 409 if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) { 410 dev_err(sz->dev, "Error submitting urb\n"); 411 return -EIO; 412 } 413 414 return 0; 415 } 416 417 module_usb_driver(streamzap_driver); 418 419 MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>"); 420 MODULE_DESCRIPTION(DRIVER_DESC); 421 MODULE_LICENSE("GPL"); 422