xref: /openbmc/linux/drivers/media/rc/streamzap.c (revision a8a28aff)
1 /*
2  * Streamzap Remote Control driver
3  *
4  * Copyright (c) 2005 Christoph Bartelmus <lirc@bartelmus.de>
5  * Copyright (c) 2010 Jarod Wilson <jarod@wilsonet.com>
6  *
7  * This driver was based on the work of Greg Wickham and Adrian
8  * Dewhurst. It was substantially rewritten to support correct signal
9  * gaps and now maintains a delay buffer, which is used to present
10  * consistent timing behaviour to user space applications. Without the
11  * delay buffer an ugly hack would be required in lircd, which can
12  * cause sluggish signal decoding in certain situations.
13  *
14  * Ported to in-kernel ir-core interface by Jarod Wilson
15  *
16  * This driver is based on the USB skeleton driver packaged with the
17  * kernel; copyright (C) 2001-2003 Greg Kroah-Hartman (greg@kroah.com)
18  *
19  *  This program is free software; you can redistribute it and/or modify
20  *  it under the terms of the GNU General Public License as published by
21  *  the Free Software Foundation; either version 2 of the License, or
22  *  (at your option) any later version.
23  *
24  *  This program is distributed in the hope that it will be useful,
25  *  but WITHOUT ANY WARRANTY; without even the implied warranty of
26  *  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
27  *  GNU General Public License for more details.
28  *
29  *  You should have received a copy of the GNU General Public License
30  *  along with this program; if not, write to the Free Software
31  *  Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA  02111-1307  USA
32  */
33 
34 #include <linux/device.h>
35 #include <linux/module.h>
36 #include <linux/slab.h>
37 #include <linux/usb.h>
38 #include <linux/usb/input.h>
39 #include <media/rc-core.h>
40 
41 #define DRIVER_VERSION	"1.61"
42 #define DRIVER_NAME	"streamzap"
43 #define DRIVER_DESC	"Streamzap Remote Control driver"
44 
45 #define USB_STREAMZAP_VENDOR_ID		0x0e9c
46 #define USB_STREAMZAP_PRODUCT_ID	0x0000
47 
48 /* table of devices that work with this driver */
49 static struct usb_device_id streamzap_table[] = {
50 	/* Streamzap Remote Control */
51 	{ USB_DEVICE(USB_STREAMZAP_VENDOR_ID, USB_STREAMZAP_PRODUCT_ID) },
52 	/* Terminating entry */
53 	{ }
54 };
55 
56 MODULE_DEVICE_TABLE(usb, streamzap_table);
57 
58 #define SZ_PULSE_MASK 0xf0
59 #define SZ_SPACE_MASK 0x0f
60 #define SZ_TIMEOUT    0xff
61 #define SZ_RESOLUTION 256
62 
63 /* number of samples buffered */
64 #define SZ_BUF_LEN 128
65 
66 /* from ir-rc5-sz-decoder.c */
67 #ifdef CONFIG_IR_RC5_SZ_DECODER_MODULE
68 #define load_rc5_sz_decode()    request_module("ir-rc5-sz-decoder")
69 #else
70 #define load_rc5_sz_decode()    {}
71 #endif
72 
73 enum StreamzapDecoderState {
74 	PulseSpace,
75 	FullPulse,
76 	FullSpace,
77 	IgnorePulse
78 };
79 
80 /* structure to hold our device specific stuff */
81 struct streamzap_ir {
82 	/* ir-core */
83 	struct rc_dev *rdev;
84 
85 	/* core device info */
86 	struct device *dev;
87 
88 	/* usb */
89 	struct usb_device	*usbdev;
90 	struct usb_interface	*interface;
91 	struct usb_endpoint_descriptor *endpoint;
92 	struct urb		*urb_in;
93 
94 	/* buffer & dma */
95 	unsigned char		*buf_in;
96 	dma_addr_t		dma_in;
97 	unsigned int		buf_in_len;
98 
99 	/* track what state we're in */
100 	enum StreamzapDecoderState decoder_state;
101 	/* tracks whether we are currently receiving some signal */
102 	bool			idle;
103 	/* sum of signal lengths received since signal start */
104 	unsigned long		sum;
105 	/* start time of signal; necessary for gap tracking */
106 	struct timeval		signal_last;
107 	struct timeval		signal_start;
108 	bool			timeout_enabled;
109 
110 	char			name[128];
111 	char			phys[64];
112 };
113 
114 
115 /* local function prototypes */
116 static int streamzap_probe(struct usb_interface *interface,
117 			   const struct usb_device_id *id);
118 static void streamzap_disconnect(struct usb_interface *interface);
119 static void streamzap_callback(struct urb *urb);
120 static int streamzap_suspend(struct usb_interface *intf, pm_message_t message);
121 static int streamzap_resume(struct usb_interface *intf);
122 
123 /* usb specific object needed to register this driver with the usb subsystem */
124 static struct usb_driver streamzap_driver = {
125 	.name =		DRIVER_NAME,
126 	.probe =	streamzap_probe,
127 	.disconnect =	streamzap_disconnect,
128 	.suspend =	streamzap_suspend,
129 	.resume =	streamzap_resume,
130 	.id_table =	streamzap_table,
131 };
132 
133 static void sz_push(struct streamzap_ir *sz, struct ir_raw_event rawir)
134 {
135 	dev_dbg(sz->dev, "Storing %s with duration %u us\n",
136 		(rawir.pulse ? "pulse" : "space"), rawir.duration);
137 	ir_raw_event_store_with_filter(sz->rdev, &rawir);
138 }
139 
140 static void sz_push_full_pulse(struct streamzap_ir *sz,
141 			       unsigned char value)
142 {
143 	DEFINE_IR_RAW_EVENT(rawir);
144 
145 	if (sz->idle) {
146 		long deltv;
147 
148 		sz->signal_last = sz->signal_start;
149 		do_gettimeofday(&sz->signal_start);
150 
151 		deltv = sz->signal_start.tv_sec - sz->signal_last.tv_sec;
152 		rawir.pulse = false;
153 		if (deltv > 15) {
154 			/* really long time */
155 			rawir.duration = IR_MAX_DURATION;
156 		} else {
157 			rawir.duration = (int)(deltv * 1000000 +
158 				sz->signal_start.tv_usec -
159 				sz->signal_last.tv_usec);
160 			rawir.duration -= sz->sum;
161 			rawir.duration = US_TO_NS(rawir.duration);
162 			rawir.duration &= IR_MAX_DURATION;
163 		}
164 		sz_push(sz, rawir);
165 
166 		sz->idle = false;
167 		sz->sum = 0;
168 	}
169 
170 	rawir.pulse = true;
171 	rawir.duration = ((int) value) * SZ_RESOLUTION;
172 	rawir.duration += SZ_RESOLUTION / 2;
173 	sz->sum += rawir.duration;
174 	rawir.duration = US_TO_NS(rawir.duration);
175 	rawir.duration &= IR_MAX_DURATION;
176 	sz_push(sz, rawir);
177 }
178 
179 static void sz_push_half_pulse(struct streamzap_ir *sz,
180 			       unsigned char value)
181 {
182 	sz_push_full_pulse(sz, (value & SZ_PULSE_MASK) >> 4);
183 }
184 
185 static void sz_push_full_space(struct streamzap_ir *sz,
186 			       unsigned char value)
187 {
188 	DEFINE_IR_RAW_EVENT(rawir);
189 
190 	rawir.pulse = false;
191 	rawir.duration = ((int) value) * SZ_RESOLUTION;
192 	rawir.duration += SZ_RESOLUTION / 2;
193 	sz->sum += rawir.duration;
194 	rawir.duration = US_TO_NS(rawir.duration);
195 	sz_push(sz, rawir);
196 }
197 
198 static void sz_push_half_space(struct streamzap_ir *sz,
199 			       unsigned long value)
200 {
201 	sz_push_full_space(sz, value & SZ_SPACE_MASK);
202 }
203 
204 /**
205  * streamzap_callback - usb IRQ handler callback
206  *
207  * This procedure is invoked on reception of data from
208  * the usb remote.
209  */
210 static void streamzap_callback(struct urb *urb)
211 {
212 	struct streamzap_ir *sz;
213 	unsigned int i;
214 	int len;
215 
216 	if (!urb)
217 		return;
218 
219 	sz = urb->context;
220 	len = urb->actual_length;
221 
222 	switch (urb->status) {
223 	case -ECONNRESET:
224 	case -ENOENT:
225 	case -ESHUTDOWN:
226 		/*
227 		 * this urb is terminated, clean up.
228 		 * sz might already be invalid at this point
229 		 */
230 		dev_err(sz->dev, "urb terminated, status: %d\n", urb->status);
231 		return;
232 	default:
233 		break;
234 	}
235 
236 	dev_dbg(sz->dev, "%s: received urb, len %d\n", __func__, len);
237 	for (i = 0; i < len; i++) {
238 		dev_dbg(sz->dev, "sz->buf_in[%d]: %x\n",
239 			i, (unsigned char)sz->buf_in[i]);
240 		switch (sz->decoder_state) {
241 		case PulseSpace:
242 			if ((sz->buf_in[i] & SZ_PULSE_MASK) ==
243 				SZ_PULSE_MASK) {
244 				sz->decoder_state = FullPulse;
245 				continue;
246 			} else if ((sz->buf_in[i] & SZ_SPACE_MASK)
247 					== SZ_SPACE_MASK) {
248 				sz_push_half_pulse(sz, sz->buf_in[i]);
249 				sz->decoder_state = FullSpace;
250 				continue;
251 			} else {
252 				sz_push_half_pulse(sz, sz->buf_in[i]);
253 				sz_push_half_space(sz, sz->buf_in[i]);
254 			}
255 			break;
256 		case FullPulse:
257 			sz_push_full_pulse(sz, sz->buf_in[i]);
258 			sz->decoder_state = IgnorePulse;
259 			break;
260 		case FullSpace:
261 			if (sz->buf_in[i] == SZ_TIMEOUT) {
262 				DEFINE_IR_RAW_EVENT(rawir);
263 
264 				rawir.pulse = false;
265 				rawir.duration = sz->rdev->timeout;
266 				sz->idle = true;
267 				if (sz->timeout_enabled)
268 					sz_push(sz, rawir);
269 				ir_raw_event_handle(sz->rdev);
270 				ir_raw_event_reset(sz->rdev);
271 			} else {
272 				sz_push_full_space(sz, sz->buf_in[i]);
273 			}
274 			sz->decoder_state = PulseSpace;
275 			break;
276 		case IgnorePulse:
277 			if ((sz->buf_in[i] & SZ_SPACE_MASK) ==
278 				SZ_SPACE_MASK) {
279 				sz->decoder_state = FullSpace;
280 				continue;
281 			}
282 			sz_push_half_space(sz, sz->buf_in[i]);
283 			sz->decoder_state = PulseSpace;
284 			break;
285 		}
286 	}
287 
288 	ir_raw_event_handle(sz->rdev);
289 	usb_submit_urb(urb, GFP_ATOMIC);
290 
291 	return;
292 }
293 
294 static struct rc_dev *streamzap_init_rc_dev(struct streamzap_ir *sz)
295 {
296 	struct rc_dev *rdev;
297 	struct device *dev = sz->dev;
298 	int ret;
299 
300 	rdev = rc_allocate_device();
301 	if (!rdev) {
302 		dev_err(dev, "remote dev allocation failed\n");
303 		goto out;
304 	}
305 
306 	snprintf(sz->name, sizeof(sz->name), "Streamzap PC Remote Infrared "
307 		 "Receiver (%04x:%04x)",
308 		 le16_to_cpu(sz->usbdev->descriptor.idVendor),
309 		 le16_to_cpu(sz->usbdev->descriptor.idProduct));
310 	usb_make_path(sz->usbdev, sz->phys, sizeof(sz->phys));
311 	strlcat(sz->phys, "/input0", sizeof(sz->phys));
312 
313 	rdev->input_name = sz->name;
314 	rdev->input_phys = sz->phys;
315 	usb_to_input_id(sz->usbdev, &rdev->input_id);
316 	rdev->dev.parent = dev;
317 	rdev->priv = sz;
318 	rdev->driver_type = RC_DRIVER_IR_RAW;
319 	rc_set_allowed_protocols(rdev, RC_BIT_ALL);
320 	rdev->driver_name = DRIVER_NAME;
321 	rdev->map_name = RC_MAP_STREAMZAP;
322 
323 	ret = rc_register_device(rdev);
324 	if (ret < 0) {
325 		dev_err(dev, "remote input device register failed\n");
326 		goto out;
327 	}
328 
329 	return rdev;
330 
331 out:
332 	rc_free_device(rdev);
333 	return NULL;
334 }
335 
336 /**
337  *	streamzap_probe
338  *
339  *	Called by usb-core to associated with a candidate device
340  *	On any failure the return value is the ERROR
341  *	On success return 0
342  */
343 static int streamzap_probe(struct usb_interface *intf,
344 			   const struct usb_device_id *id)
345 {
346 	struct usb_device *usbdev = interface_to_usbdev(intf);
347 	struct usb_host_interface *iface_host;
348 	struct streamzap_ir *sz = NULL;
349 	char buf[63], name[128] = "";
350 	int retval = -ENOMEM;
351 	int pipe, maxp;
352 
353 	/* Allocate space for device driver specific data */
354 	sz = kzalloc(sizeof(struct streamzap_ir), GFP_KERNEL);
355 	if (!sz)
356 		return -ENOMEM;
357 
358 	sz->usbdev = usbdev;
359 	sz->interface = intf;
360 
361 	/* Check to ensure endpoint information matches requirements */
362 	iface_host = intf->cur_altsetting;
363 
364 	if (iface_host->desc.bNumEndpoints != 1) {
365 		dev_err(&intf->dev, "%s: Unexpected desc.bNumEndpoints (%d)\n",
366 			__func__, iface_host->desc.bNumEndpoints);
367 		retval = -ENODEV;
368 		goto free_sz;
369 	}
370 
371 	sz->endpoint = &(iface_host->endpoint[0].desc);
372 	if ((sz->endpoint->bEndpointAddress & USB_ENDPOINT_DIR_MASK)
373 	    != USB_DIR_IN) {
374 		dev_err(&intf->dev, "%s: endpoint doesn't match input device "
375 			"02%02x\n", __func__, sz->endpoint->bEndpointAddress);
376 		retval = -ENODEV;
377 		goto free_sz;
378 	}
379 
380 	if ((sz->endpoint->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK)
381 	    != USB_ENDPOINT_XFER_INT) {
382 		dev_err(&intf->dev, "%s: endpoint attributes don't match xfer "
383 			"02%02x\n", __func__, sz->endpoint->bmAttributes);
384 		retval = -ENODEV;
385 		goto free_sz;
386 	}
387 
388 	pipe = usb_rcvintpipe(usbdev, sz->endpoint->bEndpointAddress);
389 	maxp = usb_maxpacket(usbdev, pipe, usb_pipeout(pipe));
390 
391 	if (maxp == 0) {
392 		dev_err(&intf->dev, "%s: endpoint Max Packet Size is 0!?!\n",
393 			__func__);
394 		retval = -ENODEV;
395 		goto free_sz;
396 	}
397 
398 	/* Allocate the USB buffer and IRQ URB */
399 	sz->buf_in = usb_alloc_coherent(usbdev, maxp, GFP_ATOMIC, &sz->dma_in);
400 	if (!sz->buf_in)
401 		goto free_sz;
402 
403 	sz->urb_in = usb_alloc_urb(0, GFP_KERNEL);
404 	if (!sz->urb_in)
405 		goto free_buf_in;
406 
407 	sz->dev = &intf->dev;
408 	sz->buf_in_len = maxp;
409 
410 	if (usbdev->descriptor.iManufacturer
411 	    && usb_string(usbdev, usbdev->descriptor.iManufacturer,
412 			  buf, sizeof(buf)) > 0)
413 		strlcpy(name, buf, sizeof(name));
414 
415 	if (usbdev->descriptor.iProduct
416 	    && usb_string(usbdev, usbdev->descriptor.iProduct,
417 			  buf, sizeof(buf)) > 0)
418 		snprintf(name + strlen(name), sizeof(name) - strlen(name),
419 			 " %s", buf);
420 
421 	sz->rdev = streamzap_init_rc_dev(sz);
422 	if (!sz->rdev)
423 		goto rc_dev_fail;
424 
425 	sz->idle = true;
426 	sz->decoder_state = PulseSpace;
427 	/* FIXME: don't yet have a way to set this */
428 	sz->timeout_enabled = true;
429 	sz->rdev->timeout = ((US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION) &
430 				IR_MAX_DURATION) | 0x03000000);
431 	#if 0
432 	/* not yet supported, depends on patches from maxim */
433 	/* see also: LIRC_GET_REC_RESOLUTION and LIRC_SET_REC_TIMEOUT */
434 	sz->min_timeout = US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION);
435 	sz->max_timeout = US_TO_NS(SZ_TIMEOUT * SZ_RESOLUTION);
436 	#endif
437 
438 	do_gettimeofday(&sz->signal_start);
439 
440 	/* Complete final initialisations */
441 	usb_fill_int_urb(sz->urb_in, usbdev, pipe, sz->buf_in,
442 			 maxp, (usb_complete_t)streamzap_callback,
443 			 sz, sz->endpoint->bInterval);
444 	sz->urb_in->transfer_dma = sz->dma_in;
445 	sz->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP;
446 
447 	usb_set_intfdata(intf, sz);
448 
449 	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC))
450 		dev_err(sz->dev, "urb submit failed\n");
451 
452 	dev_info(sz->dev, "Registered %s on usb%d:%d\n", name,
453 		 usbdev->bus->busnum, usbdev->devnum);
454 
455 	/* Load the streamzap not-quite-rc5 decoder too */
456 	load_rc5_sz_decode();
457 
458 	return 0;
459 
460 rc_dev_fail:
461 	usb_free_urb(sz->urb_in);
462 free_buf_in:
463 	usb_free_coherent(usbdev, maxp, sz->buf_in, sz->dma_in);
464 free_sz:
465 	kfree(sz);
466 
467 	return retval;
468 }
469 
470 /**
471  * streamzap_disconnect
472  *
473  * Called by the usb core when the device is removed from the system.
474  *
475  * This routine guarantees that the driver will not submit any more urbs
476  * by clearing dev->usbdev.  It is also supposed to terminate any currently
477  * active urbs.  Unfortunately, usb_bulk_msg(), used in streamzap_read(),
478  * does not provide any way to do this.
479  */
480 static void streamzap_disconnect(struct usb_interface *interface)
481 {
482 	struct streamzap_ir *sz = usb_get_intfdata(interface);
483 	struct usb_device *usbdev = interface_to_usbdev(interface);
484 
485 	usb_set_intfdata(interface, NULL);
486 
487 	if (!sz)
488 		return;
489 
490 	sz->usbdev = NULL;
491 	rc_unregister_device(sz->rdev);
492 	usb_kill_urb(sz->urb_in);
493 	usb_free_urb(sz->urb_in);
494 	usb_free_coherent(usbdev, sz->buf_in_len, sz->buf_in, sz->dma_in);
495 
496 	kfree(sz);
497 }
498 
499 static int streamzap_suspend(struct usb_interface *intf, pm_message_t message)
500 {
501 	struct streamzap_ir *sz = usb_get_intfdata(intf);
502 
503 	usb_kill_urb(sz->urb_in);
504 
505 	return 0;
506 }
507 
508 static int streamzap_resume(struct usb_interface *intf)
509 {
510 	struct streamzap_ir *sz = usb_get_intfdata(intf);
511 
512 	if (usb_submit_urb(sz->urb_in, GFP_ATOMIC)) {
513 		dev_err(sz->dev, "Error sumbiting urb\n");
514 		return -EIO;
515 	}
516 
517 	return 0;
518 }
519 
520 module_usb_driver(streamzap_driver);
521 
522 MODULE_AUTHOR("Jarod Wilson <jarod@wilsonet.com>");
523 MODULE_DESCRIPTION(DRIVER_DESC);
524 MODULE_LICENSE("GPL");
525