xref: /openbmc/linux/drivers/media/rc/nuvoton-cir.h (revision d9fd5a71)
1 /* SPDX-License-Identifier: GPL-2.0-or-later */
2 /*
3  * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR
4  *
5  * Copyright (C) 2010 Jarod Wilson <jarod@redhat.com>
6  * Copyright (C) 2009 Nuvoton PS Team
7  *
8  * Special thanks to Nuvoton for providing hardware, spec sheets and
9  * sample code upon which portions of this driver are based. Indirect
10  * thanks also to Maxim Levitsky, whose ene_ir driver this driver is
11  * modeled after.
12  */
13 
14 #include <linux/spinlock.h>
15 #include <linux/ioctl.h>
16 
17 /* platform driver name to register */
18 #define NVT_DRIVER_NAME "nuvoton-cir"
19 
20 /* debugging module parameter */
21 static int debug;
22 
23 
24 #define nvt_dbg(text, ...) \
25 	if (debug) \
26 		printk(KERN_DEBUG \
27 			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
28 
29 #define nvt_dbg_verbose(text, ...) \
30 	if (debug > 1) \
31 		printk(KERN_DEBUG \
32 			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
33 
34 #define nvt_dbg_wake(text, ...) \
35 	if (debug > 2) \
36 		printk(KERN_DEBUG \
37 			KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__)
38 
39 
40 #define RX_BUF_LEN 32
41 
42 #define SIO_ID_MASK 0xfff0
43 
44 enum nvt_chip_ver {
45 	NVT_UNKNOWN	= 0,
46 	NVT_W83667HG	= 0xa510,
47 	NVT_6775F	= 0xb470,
48 	NVT_6776F	= 0xc330,
49 	NVT_6779D	= 0xc560,
50 	NVT_INVALID	= 0xffff,
51 };
52 
53 struct nvt_chip {
54 	const char *name;
55 	enum nvt_chip_ver chip_ver;
56 };
57 
58 struct nvt_dev {
59 	struct rc_dev *rdev;
60 
61 	spinlock_t lock;
62 
63 	/* for rx */
64 	u8 buf[RX_BUF_LEN];
65 	unsigned int pkts;
66 
67 	/* EFER Config register index/data pair */
68 	u32 cr_efir;
69 	u32 cr_efdr;
70 
71 	/* hardware I/O settings */
72 	unsigned long cir_addr;
73 	unsigned long cir_wake_addr;
74 	int cir_irq;
75 
76 	enum nvt_chip_ver chip_ver;
77 	/* hardware id */
78 	u8 chip_major;
79 	u8 chip_minor;
80 
81 	/* carrier period = 1 / frequency */
82 	u32 carrier;
83 };
84 
85 /* buffer packet constants */
86 #define BUF_PULSE_BIT	0x80
87 #define BUF_LEN_MASK	0x7f
88 #define BUF_REPEAT_BYTE	0x70
89 #define BUF_REPEAT_MASK	0xf0
90 
91 /* CIR settings */
92 
93 /* total length of CIR and CIR WAKE */
94 #define CIR_IOREG_LENGTH	0x0f
95 
96 /* RX limit length, 8 high bits for SLCH, 8 low bits for SLCL */
97 #define CIR_RX_LIMIT_COUNT  (IR_DEFAULT_TIMEOUT / SAMPLE_PERIOD)
98 
99 /* CIR Regs */
100 #define CIR_IRCON	0x00
101 #define CIR_IRSTS	0x01
102 #define CIR_IREN	0x02
103 #define CIR_RXFCONT	0x03
104 #define CIR_CP		0x04
105 #define CIR_CC		0x05
106 #define CIR_SLCH	0x06
107 #define CIR_SLCL	0x07
108 #define CIR_FIFOCON	0x08
109 #define CIR_IRFIFOSTS	0x09
110 #define CIR_SRXFIFO	0x0a
111 #define CIR_TXFCONT	0x0b
112 #define CIR_STXFIFO	0x0c
113 #define CIR_FCCH	0x0d
114 #define CIR_FCCL	0x0e
115 #define CIR_IRFSM	0x0f
116 
117 /* CIR IRCON settings */
118 #define CIR_IRCON_RECV	 0x80
119 #define CIR_IRCON_WIREN	 0x40
120 #define CIR_IRCON_TXEN	 0x20
121 #define CIR_IRCON_RXEN	 0x10
122 #define CIR_IRCON_WRXINV 0x08
123 #define CIR_IRCON_RXINV	 0x04
124 
125 #define CIR_IRCON_SAMPLE_PERIOD_SEL_1	0x00
126 #define CIR_IRCON_SAMPLE_PERIOD_SEL_25	0x01
127 #define CIR_IRCON_SAMPLE_PERIOD_SEL_50	0x02
128 #define CIR_IRCON_SAMPLE_PERIOD_SEL_100	0x03
129 
130 /* FIXME: make this a runtime option */
131 /* select sample period as 50us */
132 #define CIR_IRCON_SAMPLE_PERIOD_SEL	CIR_IRCON_SAMPLE_PERIOD_SEL_50
133 
134 /* CIR IRSTS settings */
135 #define CIR_IRSTS_RDR	0x80
136 #define CIR_IRSTS_RTR	0x40
137 #define CIR_IRSTS_PE	0x20
138 #define CIR_IRSTS_RFO	0x10
139 #define CIR_IRSTS_TE	0x08
140 #define CIR_IRSTS_TTR	0x04
141 #define CIR_IRSTS_TFU	0x02
142 #define CIR_IRSTS_GH	0x01
143 
144 /* CIR IREN settings */
145 #define CIR_IREN_RDR	0x80
146 #define CIR_IREN_RTR	0x40
147 #define CIR_IREN_PE	0x20
148 #define CIR_IREN_RFO	0x10
149 #define CIR_IREN_TE	0x08
150 #define CIR_IREN_TTR	0x04
151 #define CIR_IREN_TFU	0x02
152 #define CIR_IREN_GH	0x01
153 
154 /* CIR FIFOCON settings */
155 #define CIR_FIFOCON_TXFIFOCLR		0x80
156 
157 #define CIR_FIFOCON_TX_TRIGGER_LEV_31	0x00
158 #define CIR_FIFOCON_TX_TRIGGER_LEV_24	0x10
159 #define CIR_FIFOCON_TX_TRIGGER_LEV_16	0x20
160 #define CIR_FIFOCON_TX_TRIGGER_LEV_8	0x30
161 
162 /* FIXME: make this a runtime option */
163 /* select TX trigger level as 16 */
164 #define CIR_FIFOCON_TX_TRIGGER_LEV	CIR_FIFOCON_TX_TRIGGER_LEV_16
165 
166 #define CIR_FIFOCON_RXFIFOCLR		0x08
167 
168 #define CIR_FIFOCON_RX_TRIGGER_LEV_1	0x00
169 #define CIR_FIFOCON_RX_TRIGGER_LEV_8	0x01
170 #define CIR_FIFOCON_RX_TRIGGER_LEV_16	0x02
171 #define CIR_FIFOCON_RX_TRIGGER_LEV_24	0x03
172 
173 /* FIXME: make this a runtime option */
174 /* select RX trigger level as 24 */
175 #define CIR_FIFOCON_RX_TRIGGER_LEV	CIR_FIFOCON_RX_TRIGGER_LEV_24
176 
177 /* CIR IRFIFOSTS settings */
178 #define CIR_IRFIFOSTS_IR_PENDING	0x80
179 #define CIR_IRFIFOSTS_RX_GS		0x40
180 #define CIR_IRFIFOSTS_RX_FTA		0x20
181 #define CIR_IRFIFOSTS_RX_EMPTY		0x10
182 #define CIR_IRFIFOSTS_RX_FULL		0x08
183 #define CIR_IRFIFOSTS_TX_FTA		0x04
184 #define CIR_IRFIFOSTS_TX_EMPTY		0x02
185 #define CIR_IRFIFOSTS_TX_FULL		0x01
186 
187 
188 /* CIR WAKE UP Regs */
189 #define CIR_WAKE_IRCON			0x00
190 #define CIR_WAKE_IRSTS			0x01
191 #define CIR_WAKE_IREN			0x02
192 #define CIR_WAKE_FIFO_CMP_DEEP		0x03
193 #define CIR_WAKE_FIFO_CMP_TOL		0x04
194 #define CIR_WAKE_FIFO_COUNT		0x05
195 #define CIR_WAKE_SLCH			0x06
196 #define CIR_WAKE_SLCL			0x07
197 #define CIR_WAKE_FIFOCON		0x08
198 #define CIR_WAKE_SRXFSTS		0x09
199 #define CIR_WAKE_SAMPLE_RX_FIFO		0x0a
200 #define CIR_WAKE_WR_FIFO_DATA		0x0b
201 #define CIR_WAKE_RD_FIFO_ONLY		0x0c
202 #define CIR_WAKE_RD_FIFO_ONLY_IDX	0x0d
203 #define CIR_WAKE_FIFO_IGNORE		0x0e
204 #define CIR_WAKE_IRFSM			0x0f
205 
206 /* CIR WAKE UP IRCON settings */
207 #define CIR_WAKE_IRCON_DEC_RST		0x80
208 #define CIR_WAKE_IRCON_MODE1		0x40
209 #define CIR_WAKE_IRCON_MODE0		0x20
210 #define CIR_WAKE_IRCON_RXEN		0x10
211 #define CIR_WAKE_IRCON_R		0x08
212 #define CIR_WAKE_IRCON_RXINV		0x04
213 
214 /* FIXME/jarod: make this a runtime option */
215 /* select a same sample period like cir register */
216 #define CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL	CIR_IRCON_SAMPLE_PERIOD_SEL_50
217 
218 /* CIR WAKE IRSTS Bits */
219 #define CIR_WAKE_IRSTS_RDR		0x80
220 #define CIR_WAKE_IRSTS_RTR		0x40
221 #define CIR_WAKE_IRSTS_PE		0x20
222 #define CIR_WAKE_IRSTS_RFO		0x10
223 #define CIR_WAKE_IRSTS_GH		0x08
224 #define CIR_WAKE_IRSTS_IR_PENDING	0x01
225 
226 /* CIR WAKE UP IREN Bits */
227 #define CIR_WAKE_IREN_RDR		0x80
228 #define CIR_WAKE_IREN_RTR		0x40
229 #define CIR_WAKE_IREN_PE		0x20
230 #define CIR_WAKE_IREN_RFO		0x10
231 #define CIR_WAKE_IREN_GH		0x08
232 
233 /* CIR WAKE FIFOCON settings */
234 #define CIR_WAKE_FIFOCON_RXFIFOCLR	0x08
235 
236 #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67	0x00
237 #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_66	0x01
238 #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_65	0x02
239 #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_64	0x03
240 
241 /* FIXME: make this a runtime option */
242 /* select WAKE UP RX trigger level as 67 */
243 #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV	CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67
244 
245 /* CIR WAKE SRXFSTS settings */
246 #define CIR_WAKE_IRFIFOSTS_RX_GS	0x80
247 #define CIR_WAKE_IRFIFOSTS_RX_FTA	0x40
248 #define CIR_WAKE_IRFIFOSTS_RX_EMPTY	0x20
249 #define CIR_WAKE_IRFIFOSTS_RX_FULL	0x10
250 
251 /*
252  * The CIR Wake FIFO buffer is 67 bytes long, but the stock remote wakes
253  * the system comparing only 65 bytes (fails with this set to 67)
254  */
255 #define CIR_WAKE_FIFO_CMP_BYTES		65
256 /* CIR Wake byte comparison tolerance */
257 #define CIR_WAKE_CMP_TOLERANCE		5
258 
259 /*
260  * Extended Function Enable Registers:
261  *  Extended Function Index Register
262  *  Extended Function Data Register
263  */
264 #define CR_EFIR			0x2e
265 #define CR_EFDR			0x2f
266 
267 /* Possible alternate EFER values, depends on how the chip is wired */
268 #define CR_EFIR2		0x4e
269 #define CR_EFDR2		0x4f
270 
271 /* Extended Function Mode enable/disable magic values */
272 #define EFER_EFM_ENABLE		0x87
273 #define EFER_EFM_DISABLE	0xaa
274 
275 /* Config regs we need to care about */
276 #define CR_SOFTWARE_RESET	0x02
277 #define CR_LOGICAL_DEV_SEL	0x07
278 #define CR_CHIP_ID_HI		0x20
279 #define CR_CHIP_ID_LO		0x21
280 #define CR_DEV_POWER_DOWN	0x22 /* bit 2 is CIR power, default power on */
281 #define CR_OUTPUT_PIN_SEL	0x27
282 #define CR_MULTIFUNC_PIN_SEL	0x2c
283 #define CR_LOGICAL_DEV_EN	0x30 /* valid for all logical devices */
284 /* next three regs valid for both the CIR and CIR_WAKE logical devices */
285 #define CR_CIR_BASE_ADDR_HI	0x60
286 #define CR_CIR_BASE_ADDR_LO	0x61
287 #define CR_CIR_IRQ_RSRC		0x70
288 /* next three regs valid only for ACPI logical dev */
289 #define CR_ACPI_CIR_WAKE	0xe0
290 #define CR_ACPI_IRQ_EVENTS	0xf6
291 #define CR_ACPI_IRQ_EVENTS2	0xf7
292 
293 /* Logical devices that we need to care about */
294 #define LOGICAL_DEV_LPT		0x01
295 #define LOGICAL_DEV_CIR		0x06
296 #define LOGICAL_DEV_ACPI	0x0a
297 #define LOGICAL_DEV_CIR_WAKE	0x0e
298 
299 #define LOGICAL_DEV_DISABLE	0x00
300 #define LOGICAL_DEV_ENABLE	0x01
301 
302 #define CIR_WAKE_ENABLE_BIT	0x08
303 #define PME_INTR_CIR_PASS_BIT	0x08
304 
305 /* w83677hg CIR pin config */
306 #define OUTPUT_PIN_SEL_MASK	0xbc
307 #define OUTPUT_ENABLE_CIR	0x01 /* Pin95=CIRRX, Pin96=CIRTX1 */
308 #define OUTPUT_ENABLE_CIRWB	0x40 /* enable wide-band sensor */
309 
310 /* w83667hg CIR pin config */
311 #define MULTIFUNC_PIN_SEL_MASK	0x1f
312 #define MULTIFUNC_ENABLE_CIR	0x80 /* Pin75=CIRRX, Pin76=CIRTX1 */
313 #define MULTIFUNC_ENABLE_CIRWB	0x20 /* enable wide-band sensor */
314 
315 /* MCE CIR signal length, related on sample period */
316 
317 /* MCE CIR controller signal length: about 43ms
318  * 43ms / 50us (sample period) * 0.85 (inaccuracy)
319  */
320 #define CONTROLLER_BUF_LEN_MIN 830
321 
322 /* MCE CIR keyboard signal length: about 26ms
323  * 26ms / 50us (sample period) * 0.85 (inaccuracy)
324  */
325 #define KEYBOARD_BUF_LEN_MAX 650
326 #define KEYBOARD_BUF_LEN_MIN 610
327 
328 /* MCE CIR mouse signal length: about 24ms
329  * 24ms / 50us (sample period) * 0.85 (inaccuracy)
330  */
331 #define MOUSE_BUF_LEN_MIN 565
332 
333 #define CIR_SAMPLE_PERIOD 50
334 #define CIR_SAMPLE_LOW_INACCURACY 0.85
335 
336 /* MAX silence time that driver will sent to lirc */
337 #define MAX_SILENCE_TIME 60000
338 
339 #if CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_100
340 #define SAMPLE_PERIOD 100
341 
342 #elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_50
343 #define SAMPLE_PERIOD 50
344 
345 #elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_25
346 #define SAMPLE_PERIOD 25
347 
348 #else
349 #define SAMPLE_PERIOD 1
350 #endif
351 
352 /* as VISTA MCE definition, valid carrier value */
353 #define MAX_CARRIER 60000
354 #define MIN_CARRIER 30000
355 
356 /* max wakeup sequence length */
357 #define WAKEUP_MAX_SIZE 65
358