1 /* 2 * Driver for Nuvoton Technology Corporation w83667hg/w83677hg-i CIR 3 * 4 * Copyright (C) 2010 Jarod Wilson <jarod@redhat.com> 5 * Copyright (C) 2009 Nuvoton PS Team 6 * 7 * Special thanks to Nuvoton for providing hardware, spec sheets and 8 * sample code upon which portions of this driver are based. Indirect 9 * thanks also to Maxim Levitsky, whose ene_ir driver this driver is 10 * modeled after. 11 * 12 * This program is free software; you can redistribute it and/or 13 * modify it under the terms of the GNU General Public License as 14 * published by the Free Software Foundation; either version 2 of the 15 * License, or (at your option) any later version. 16 * 17 * This program is distributed in the hope that it will be useful, but 18 * WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 20 * General Public License for more details. 21 * 22 * You should have received a copy of the GNU General Public License 23 * along with this program; if not, write to the Free Software 24 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 25 * USA 26 */ 27 28 #include <linux/spinlock.h> 29 #include <linux/ioctl.h> 30 31 /* platform driver name to register */ 32 #define NVT_DRIVER_NAME "nuvoton-cir" 33 34 /* debugging module parameter */ 35 static int debug; 36 37 38 #define nvt_pr(level, text, ...) \ 39 printk(level KBUILD_MODNAME ": " text, ## __VA_ARGS__) 40 41 #define nvt_dbg(text, ...) \ 42 if (debug) \ 43 printk(KERN_DEBUG \ 44 KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) 45 46 #define nvt_dbg_verbose(text, ...) \ 47 if (debug > 1) \ 48 printk(KERN_DEBUG \ 49 KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) 50 51 #define nvt_dbg_wake(text, ...) \ 52 if (debug > 2) \ 53 printk(KERN_DEBUG \ 54 KBUILD_MODNAME ": " text "\n" , ## __VA_ARGS__) 55 56 57 /* 58 * Original lirc driver said min value of 76, and recommended value of 256 59 * for the buffer length, but then used 2048. Never mind that the size of the 60 * RX FIFO is 32 bytes... So I'm using 32 for RX and 256 for TX atm, but I'm 61 * not sure if maybe that TX value is off by a factor of 8 (bits vs. bytes), 62 * and I don't have TX-capable hardware to test/debug on... 63 */ 64 #define TX_BUF_LEN 256 65 #define RX_BUF_LEN 32 66 67 struct nvt_dev { 68 struct pnp_dev *pdev; 69 struct rc_dev *rdev; 70 71 spinlock_t nvt_lock; 72 73 /* for rx */ 74 u8 buf[RX_BUF_LEN]; 75 unsigned int pkts; 76 77 struct { 78 spinlock_t lock; 79 u8 buf[TX_BUF_LEN]; 80 unsigned int buf_count; 81 unsigned int cur_buf_num; 82 wait_queue_head_t queue; 83 u8 tx_state; 84 } tx; 85 86 /* EFER Config register index/data pair */ 87 u32 cr_efir; 88 u32 cr_efdr; 89 90 /* hardware I/O settings */ 91 unsigned long cir_addr; 92 unsigned long cir_wake_addr; 93 int cir_irq; 94 int cir_wake_irq; 95 96 /* hardware id */ 97 u8 chip_major; 98 u8 chip_minor; 99 100 /* hardware features */ 101 bool hw_learning_capable; 102 bool hw_tx_capable; 103 104 /* rx settings */ 105 bool learning_enabled; 106 107 /* track cir wake state */ 108 u8 wake_state; 109 /* for study */ 110 u8 study_state; 111 /* carrier period = 1 / frequency */ 112 u32 carrier; 113 }; 114 115 /* study states */ 116 #define ST_STUDY_NONE 0x0 117 #define ST_STUDY_START 0x1 118 #define ST_STUDY_CARRIER 0x2 119 #define ST_STUDY_ALL_RECV 0x4 120 121 /* wake states */ 122 #define ST_WAKE_NONE 0x0 123 #define ST_WAKE_START 0x1 124 #define ST_WAKE_FINISH 0x2 125 126 /* receive states */ 127 #define ST_RX_WAIT_7F 0x1 128 #define ST_RX_WAIT_HEAD 0x2 129 #define ST_RX_WAIT_SILENT_END 0x4 130 131 /* send states */ 132 #define ST_TX_NONE 0x0 133 #define ST_TX_REQUEST 0x2 134 #define ST_TX_REPLY 0x4 135 136 /* buffer packet constants */ 137 #define BUF_PULSE_BIT 0x80 138 #define BUF_LEN_MASK 0x7f 139 #define BUF_REPEAT_BYTE 0x70 140 #define BUF_REPEAT_MASK 0xf0 141 142 /* CIR settings */ 143 144 /* total length of CIR and CIR WAKE */ 145 #define CIR_IOREG_LENGTH 0x0f 146 147 /* RX limit length, 8 high bits for SLCH, 8 low bits for SLCL (0x7d0 = 2000) */ 148 #define CIR_RX_LIMIT_COUNT 0x7d0 149 150 /* CIR Regs */ 151 #define CIR_IRCON 0x00 152 #define CIR_IRSTS 0x01 153 #define CIR_IREN 0x02 154 #define CIR_RXFCONT 0x03 155 #define CIR_CP 0x04 156 #define CIR_CC 0x05 157 #define CIR_SLCH 0x06 158 #define CIR_SLCL 0x07 159 #define CIR_FIFOCON 0x08 160 #define CIR_IRFIFOSTS 0x09 161 #define CIR_SRXFIFO 0x0a 162 #define CIR_TXFCONT 0x0b 163 #define CIR_STXFIFO 0x0c 164 #define CIR_FCCH 0x0d 165 #define CIR_FCCL 0x0e 166 #define CIR_IRFSM 0x0f 167 168 /* CIR IRCON settings */ 169 #define CIR_IRCON_RECV 0x80 170 #define CIR_IRCON_WIREN 0x40 171 #define CIR_IRCON_TXEN 0x20 172 #define CIR_IRCON_RXEN 0x10 173 #define CIR_IRCON_WRXINV 0x08 174 #define CIR_IRCON_RXINV 0x04 175 176 #define CIR_IRCON_SAMPLE_PERIOD_SEL_1 0x00 177 #define CIR_IRCON_SAMPLE_PERIOD_SEL_25 0x01 178 #define CIR_IRCON_SAMPLE_PERIOD_SEL_50 0x02 179 #define CIR_IRCON_SAMPLE_PERIOD_SEL_100 0x03 180 181 /* FIXME: make this a runtime option */ 182 /* select sample period as 50us */ 183 #define CIR_IRCON_SAMPLE_PERIOD_SEL CIR_IRCON_SAMPLE_PERIOD_SEL_50 184 185 /* CIR IRSTS settings */ 186 #define CIR_IRSTS_RDR 0x80 187 #define CIR_IRSTS_RTR 0x40 188 #define CIR_IRSTS_PE 0x20 189 #define CIR_IRSTS_RFO 0x10 190 #define CIR_IRSTS_TE 0x08 191 #define CIR_IRSTS_TTR 0x04 192 #define CIR_IRSTS_TFU 0x02 193 #define CIR_IRSTS_GH 0x01 194 195 /* CIR IREN settings */ 196 #define CIR_IREN_RDR 0x80 197 #define CIR_IREN_RTR 0x40 198 #define CIR_IREN_PE 0x20 199 #define CIR_IREN_RFO 0x10 200 #define CIR_IREN_TE 0x08 201 #define CIR_IREN_TTR 0x04 202 #define CIR_IREN_TFU 0x02 203 #define CIR_IREN_GH 0x01 204 205 /* CIR FIFOCON settings */ 206 #define CIR_FIFOCON_TXFIFOCLR 0x80 207 208 #define CIR_FIFOCON_TX_TRIGGER_LEV_31 0x00 209 #define CIR_FIFOCON_TX_TRIGGER_LEV_24 0x10 210 #define CIR_FIFOCON_TX_TRIGGER_LEV_16 0x20 211 #define CIR_FIFOCON_TX_TRIGGER_LEV_8 0x30 212 213 /* FIXME: make this a runtime option */ 214 /* select TX trigger level as 16 */ 215 #define CIR_FIFOCON_TX_TRIGGER_LEV CIR_FIFOCON_TX_TRIGGER_LEV_16 216 217 #define CIR_FIFOCON_RXFIFOCLR 0x08 218 219 #define CIR_FIFOCON_RX_TRIGGER_LEV_1 0x00 220 #define CIR_FIFOCON_RX_TRIGGER_LEV_8 0x01 221 #define CIR_FIFOCON_RX_TRIGGER_LEV_16 0x02 222 #define CIR_FIFOCON_RX_TRIGGER_LEV_24 0x03 223 224 /* FIXME: make this a runtime option */ 225 /* select RX trigger level as 24 */ 226 #define CIR_FIFOCON_RX_TRIGGER_LEV CIR_FIFOCON_RX_TRIGGER_LEV_24 227 228 /* CIR IRFIFOSTS settings */ 229 #define CIR_IRFIFOSTS_IR_PENDING 0x80 230 #define CIR_IRFIFOSTS_RX_GS 0x40 231 #define CIR_IRFIFOSTS_RX_FTA 0x20 232 #define CIR_IRFIFOSTS_RX_EMPTY 0x10 233 #define CIR_IRFIFOSTS_RX_FULL 0x08 234 #define CIR_IRFIFOSTS_TX_FTA 0x04 235 #define CIR_IRFIFOSTS_TX_EMPTY 0x02 236 #define CIR_IRFIFOSTS_TX_FULL 0x01 237 238 239 /* CIR WAKE UP Regs */ 240 #define CIR_WAKE_IRCON 0x00 241 #define CIR_WAKE_IRSTS 0x01 242 #define CIR_WAKE_IREN 0x02 243 #define CIR_WAKE_FIFO_CMP_DEEP 0x03 244 #define CIR_WAKE_FIFO_CMP_TOL 0x04 245 #define CIR_WAKE_FIFO_COUNT 0x05 246 #define CIR_WAKE_SLCH 0x06 247 #define CIR_WAKE_SLCL 0x07 248 #define CIR_WAKE_FIFOCON 0x08 249 #define CIR_WAKE_SRXFSTS 0x09 250 #define CIR_WAKE_SAMPLE_RX_FIFO 0x0a 251 #define CIR_WAKE_WR_FIFO_DATA 0x0b 252 #define CIR_WAKE_RD_FIFO_ONLY 0x0c 253 #define CIR_WAKE_RD_FIFO_ONLY_IDX 0x0d 254 #define CIR_WAKE_FIFO_IGNORE 0x0e 255 #define CIR_WAKE_IRFSM 0x0f 256 257 /* CIR WAKE UP IRCON settings */ 258 #define CIR_WAKE_IRCON_DEC_RST 0x80 259 #define CIR_WAKE_IRCON_MODE1 0x40 260 #define CIR_WAKE_IRCON_MODE0 0x20 261 #define CIR_WAKE_IRCON_RXEN 0x10 262 #define CIR_WAKE_IRCON_R 0x08 263 #define CIR_WAKE_IRCON_RXINV 0x04 264 265 /* FIXME/jarod: make this a runtime option */ 266 /* select a same sample period like cir register */ 267 #define CIR_WAKE_IRCON_SAMPLE_PERIOD_SEL CIR_IRCON_SAMPLE_PERIOD_SEL_50 268 269 /* CIR WAKE IRSTS Bits */ 270 #define CIR_WAKE_IRSTS_RDR 0x80 271 #define CIR_WAKE_IRSTS_RTR 0x40 272 #define CIR_WAKE_IRSTS_PE 0x20 273 #define CIR_WAKE_IRSTS_RFO 0x10 274 #define CIR_WAKE_IRSTS_GH 0x08 275 #define CIR_WAKE_IRSTS_IR_PENDING 0x01 276 277 /* CIR WAKE UP IREN Bits */ 278 #define CIR_WAKE_IREN_RDR 0x80 279 #define CIR_WAKE_IREN_RTR 0x40 280 #define CIR_WAKE_IREN_PE 0x20 281 #define CIR_WAKE_IREN_RFO 0x10 282 #define CIR_WAKE_IREN_TE 0x08 283 #define CIR_WAKE_IREN_TTR 0x04 284 #define CIR_WAKE_IREN_TFU 0x02 285 #define CIR_WAKE_IREN_GH 0x01 286 287 /* CIR WAKE FIFOCON settings */ 288 #define CIR_WAKE_FIFOCON_RXFIFOCLR 0x08 289 290 #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67 0x00 291 #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_66 0x01 292 #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_65 0x02 293 #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_64 0x03 294 295 /* FIXME: make this a runtime option */ 296 /* select WAKE UP RX trigger level as 67 */ 297 #define CIR_WAKE_FIFOCON_RX_TRIGGER_LEV CIR_WAKE_FIFOCON_RX_TRIGGER_LEV_67 298 299 /* CIR WAKE SRXFSTS settings */ 300 #define CIR_WAKE_IRFIFOSTS_RX_GS 0x80 301 #define CIR_WAKE_IRFIFOSTS_RX_FTA 0x40 302 #define CIR_WAKE_IRFIFOSTS_RX_EMPTY 0x20 303 #define CIR_WAKE_IRFIFOSTS_RX_FULL 0x10 304 305 /* 306 * The CIR Wake FIFO buffer is 67 bytes long, but the stock remote wakes 307 * the system comparing only 65 bytes (fails with this set to 67) 308 */ 309 #define CIR_WAKE_FIFO_CMP_BYTES 65 310 /* CIR Wake byte comparison tolerance */ 311 #define CIR_WAKE_CMP_TOLERANCE 5 312 313 /* 314 * Extended Function Enable Registers: 315 * Extended Function Index Register 316 * Extended Function Data Register 317 */ 318 #define CR_EFIR 0x2e 319 #define CR_EFDR 0x2f 320 321 /* Possible alternate EFER values, depends on how the chip is wired */ 322 #define CR_EFIR2 0x4e 323 #define CR_EFDR2 0x4f 324 325 /* Extended Function Mode enable/disable magic values */ 326 #define EFER_EFM_ENABLE 0x87 327 #define EFER_EFM_DISABLE 0xaa 328 329 /* Chip IDs found in CR_CHIP_ID_{HI,LO} */ 330 #define CHIP_ID_HIGH_667 0xa5 331 #define CHIP_ID_HIGH_677B 0xb4 332 #define CHIP_ID_HIGH_677C 0xc3 333 #define CHIP_ID_LOW_667 0x13 334 #define CHIP_ID_LOW_677B2 0x72 335 #define CHIP_ID_LOW_677B3 0x73 336 #define CHIP_ID_LOW_677C 0x33 337 338 /* Config regs we need to care about */ 339 #define CR_SOFTWARE_RESET 0x02 340 #define CR_LOGICAL_DEV_SEL 0x07 341 #define CR_CHIP_ID_HI 0x20 342 #define CR_CHIP_ID_LO 0x21 343 #define CR_DEV_POWER_DOWN 0x22 /* bit 2 is CIR power, default power on */ 344 #define CR_OUTPUT_PIN_SEL 0x27 345 #define CR_MULTIFUNC_PIN_SEL 0x2c 346 #define CR_LOGICAL_DEV_EN 0x30 /* valid for all logical devices */ 347 /* next three regs valid for both the CIR and CIR_WAKE logical devices */ 348 #define CR_CIR_BASE_ADDR_HI 0x60 349 #define CR_CIR_BASE_ADDR_LO 0x61 350 #define CR_CIR_IRQ_RSRC 0x70 351 /* next three regs valid only for ACPI logical dev */ 352 #define CR_ACPI_CIR_WAKE 0xe0 353 #define CR_ACPI_IRQ_EVENTS 0xf6 354 #define CR_ACPI_IRQ_EVENTS2 0xf7 355 356 /* Logical devices that we need to care about */ 357 #define LOGICAL_DEV_LPT 0x01 358 #define LOGICAL_DEV_CIR 0x06 359 #define LOGICAL_DEV_ACPI 0x0a 360 #define LOGICAL_DEV_CIR_WAKE 0x0e 361 362 #define LOGICAL_DEV_DISABLE 0x00 363 #define LOGICAL_DEV_ENABLE 0x01 364 365 #define CIR_WAKE_ENABLE_BIT 0x08 366 #define PME_INTR_CIR_PASS_BIT 0x08 367 368 /* w83677hg CIR pin config */ 369 #define OUTPUT_PIN_SEL_MASK 0xbc 370 #define OUTPUT_ENABLE_CIR 0x01 /* Pin95=CIRRX, Pin96=CIRTX1 */ 371 #define OUTPUT_ENABLE_CIRWB 0x40 /* enable wide-band sensor */ 372 373 /* w83667hg CIR pin config */ 374 #define MULTIFUNC_PIN_SEL_MASK 0x1f 375 #define MULTIFUNC_ENABLE_CIR 0x80 /* Pin75=CIRRX, Pin76=CIRTX1 */ 376 #define MULTIFUNC_ENABLE_CIRWB 0x20 /* enable wide-band sensor */ 377 378 /* MCE CIR signal length, related on sample period */ 379 380 /* MCE CIR controller signal length: about 43ms 381 * 43ms / 50us (sample period) * 0.85 (inaccuracy) 382 */ 383 #define CONTROLLER_BUF_LEN_MIN 830 384 385 /* MCE CIR keyboard signal length: about 26ms 386 * 26ms / 50us (sample period) * 0.85 (inaccuracy) 387 */ 388 #define KEYBOARD_BUF_LEN_MAX 650 389 #define KEYBOARD_BUF_LEN_MIN 610 390 391 /* MCE CIR mouse signal length: about 24ms 392 * 24ms / 50us (sample period) * 0.85 (inaccuracy) 393 */ 394 #define MOUSE_BUF_LEN_MIN 565 395 396 #define CIR_SAMPLE_PERIOD 50 397 #define CIR_SAMPLE_LOW_INACCURACY 0.85 398 399 /* MAX silence time that driver will sent to lirc */ 400 #define MAX_SILENCE_TIME 60000 401 402 #if CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_100 403 #define SAMPLE_PERIOD 100 404 405 #elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_50 406 #define SAMPLE_PERIOD 50 407 408 #elif CIR_IRCON_SAMPLE_PERIOD_SEL == CIR_IRCON_SAMPLE_PERIOD_SEL_25 409 #define SAMPLE_PERIOD 25 410 411 #else 412 #define SAMPLE_PERIOD 1 413 #endif 414 415 /* as VISTA MCE definition, valid carrier value */ 416 #define MAX_CARRIER 60000 417 #define MIN_CARRIER 30000 418