1 /* 2 * Driver for USB Windows Media Center Ed. eHome Infrared Transceivers 3 * 4 * Copyright (c) 2010-2011, Jarod Wilson <jarod@redhat.com> 5 * 6 * Based on the original lirc_mceusb and lirc_mceusb2 drivers, by Dan 7 * Conti, Martin Blatter and Daniel Melander, the latter of which was 8 * in turn also based on the lirc_atiusb driver by Paul Miller. The 9 * two mce drivers were merged into one by Jarod Wilson, with transmit 10 * support for the 1st-gen device added primarily by Patrick Calhoun, 11 * with a bit of tweaks by Jarod. Debugging improvements and proper 12 * support for what appears to be 3rd-gen hardware added by Jarod. 13 * Initial port from lirc driver to ir-core drivery by Jarod, based 14 * partially on a port to an earlier proposed IR infrastructure by 15 * Jon Smirl, which included enhancements and simplifications to the 16 * incoming IR buffer parsing routines. 17 * 18 * Updated in July of 2011 with the aid of Microsoft's official 19 * remote/transceiver requirements and specification document, found at 20 * download.microsoft.com, title 21 * Windows-Media-Center-RC-IR-Collection-Green-Button-Specification-03-08-2011-V2.pdf 22 * 23 * 24 * This program is free software; you can redistribute it and/or modify 25 * it under the terms of the GNU General Public License as published by 26 * the Free Software Foundation; either version 2 of the License, or 27 * (at your option) any later version. 28 * 29 * This program is distributed in the hope that it will be useful, 30 * but WITHOUT ANY WARRANTY; without even the implied warranty of 31 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 32 * GNU General Public License for more details. 33 * 34 * You should have received a copy of the GNU General Public License 35 * along with this program; if not, write to the Free Software 36 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 37 * 38 */ 39 40 #include <linux/device.h> 41 #include <linux/module.h> 42 #include <linux/slab.h> 43 #include <linux/usb.h> 44 #include <linux/usb/input.h> 45 #include <linux/pm_wakeup.h> 46 #include <media/rc-core.h> 47 48 #define DRIVER_VERSION "1.92" 49 #define DRIVER_AUTHOR "Jarod Wilson <jarod@redhat.com>" 50 #define DRIVER_DESC "Windows Media Center Ed. eHome Infrared Transceiver " \ 51 "device driver" 52 #define DRIVER_NAME "mceusb" 53 54 #define USB_BUFLEN 32 /* USB reception buffer length */ 55 #define USB_CTRL_MSG_SZ 2 /* Size of usb ctrl msg on gen1 hw */ 56 #define MCE_G1_INIT_MSGS 40 /* Init messages on gen1 hw to throw out */ 57 58 /* MCE constants */ 59 #define MCE_CMDBUF_SIZE 384 /* MCE Command buffer length */ 60 #define MCE_TIME_UNIT 50 /* Approx 50us resolution */ 61 #define MCE_CODE_LENGTH 5 /* Normal length of packet (with header) */ 62 #define MCE_PACKET_SIZE 4 /* Normal length of packet (without header) */ 63 #define MCE_IRDATA_HEADER 0x84 /* Actual header format is 0x80 + num_bytes */ 64 #define MCE_IRDATA_TRAILER 0x80 /* End of IR data */ 65 #define MCE_TX_HEADER_LENGTH 3 /* # of bytes in the initializing tx header */ 66 #define MCE_MAX_CHANNELS 2 /* Two transmitters, hardware dependent? */ 67 #define MCE_DEFAULT_TX_MASK 0x03 /* Vals: TX1=0x01, TX2=0x02, ALL=0x03 */ 68 #define MCE_PULSE_BIT 0x80 /* Pulse bit, MSB set == PULSE else SPACE */ 69 #define MCE_PULSE_MASK 0x7f /* Pulse mask */ 70 #define MCE_MAX_PULSE_LENGTH 0x7f /* Longest transmittable pulse symbol */ 71 72 /* 73 * The interface between the host and the IR hardware is command-response 74 * based. All commands and responses have a consistent format, where a lead 75 * byte always identifies the type of data following it. The lead byte has 76 * a port value in the 3 highest bits and a length value in the 5 lowest 77 * bits. 78 * 79 * The length field is overloaded, with a value of 11111 indicating that the 80 * following byte is a command or response code, and the length of the entire 81 * message is determined by the code. If the length field is not 11111, then 82 * it specifies the number of bytes of port data that follow. 83 */ 84 #define MCE_CMD 0x1f 85 #define MCE_PORT_IR 0x4 /* (0x4 << 5) | MCE_CMD = 0x9f */ 86 #define MCE_PORT_SYS 0x7 /* (0x7 << 5) | MCE_CMD = 0xff */ 87 #define MCE_PORT_SER 0x6 /* 0xc0 thru 0xdf flush & 0x1f bytes */ 88 #define MCE_PORT_MASK 0xe0 /* Mask out command bits */ 89 90 /* Command port headers */ 91 #define MCE_CMD_PORT_IR 0x9f /* IR-related cmd/rsp */ 92 #define MCE_CMD_PORT_SYS 0xff /* System (non-IR) device cmd/rsp */ 93 94 /* Commands that set device state (2-4 bytes in length) */ 95 #define MCE_CMD_RESET 0xfe /* Reset device, 2 bytes */ 96 #define MCE_CMD_RESUME 0xaa /* Resume device after error, 2 bytes */ 97 #define MCE_CMD_SETIRCFS 0x06 /* Set tx carrier, 4 bytes */ 98 #define MCE_CMD_SETIRTIMEOUT 0x0c /* Set timeout, 4 bytes */ 99 #define MCE_CMD_SETIRTXPORTS 0x08 /* Set tx ports, 3 bytes */ 100 #define MCE_CMD_SETIRRXPORTEN 0x14 /* Set rx ports, 3 bytes */ 101 #define MCE_CMD_FLASHLED 0x23 /* Flash receiver LED, 2 bytes */ 102 103 /* Commands that query device state (all 2 bytes, unless noted) */ 104 #define MCE_CMD_GETIRCFS 0x07 /* Get carrier */ 105 #define MCE_CMD_GETIRTIMEOUT 0x0d /* Get timeout */ 106 #define MCE_CMD_GETIRTXPORTS 0x13 /* Get tx ports */ 107 #define MCE_CMD_GETIRRXPORTEN 0x15 /* Get rx ports */ 108 #define MCE_CMD_GETPORTSTATUS 0x11 /* Get tx port status, 3 bytes */ 109 #define MCE_CMD_GETIRNUMPORTS 0x16 /* Get number of ports */ 110 #define MCE_CMD_GETWAKESOURCE 0x17 /* Get wake source */ 111 #define MCE_CMD_GETEMVER 0x22 /* Get emulator interface version */ 112 #define MCE_CMD_GETDEVDETAILS 0x21 /* Get device details (em ver2 only) */ 113 #define MCE_CMD_GETWAKESUPPORT 0x20 /* Get wake details (em ver2 only) */ 114 #define MCE_CMD_GETWAKEVERSION 0x18 /* Get wake pattern (em ver2 only) */ 115 116 /* Misc commands */ 117 #define MCE_CMD_NOP 0xff /* No operation */ 118 119 /* Responses to commands (non-error cases) */ 120 #define MCE_RSP_EQIRCFS 0x06 /* tx carrier, 4 bytes */ 121 #define MCE_RSP_EQIRTIMEOUT 0x0c /* rx timeout, 4 bytes */ 122 #define MCE_RSP_GETWAKESOURCE 0x17 /* wake source, 3 bytes */ 123 #define MCE_RSP_EQIRTXPORTS 0x08 /* tx port mask, 3 bytes */ 124 #define MCE_RSP_EQIRRXPORTEN 0x14 /* rx port mask, 3 bytes */ 125 #define MCE_RSP_GETPORTSTATUS 0x11 /* tx port status, 7 bytes */ 126 #define MCE_RSP_EQIRRXCFCNT 0x15 /* rx carrier count, 4 bytes */ 127 #define MCE_RSP_EQIRNUMPORTS 0x16 /* number of ports, 4 bytes */ 128 #define MCE_RSP_EQWAKESUPPORT 0x20 /* wake capabilities, 3 bytes */ 129 #define MCE_RSP_EQWAKEVERSION 0x18 /* wake pattern details, 6 bytes */ 130 #define MCE_RSP_EQDEVDETAILS 0x21 /* device capabilities, 3 bytes */ 131 #define MCE_RSP_EQEMVER 0x22 /* emulator interface ver, 3 bytes */ 132 #define MCE_RSP_FLASHLED 0x23 /* success flashing LED, 2 bytes */ 133 134 /* Responses to error cases, must send MCE_CMD_RESUME to clear them */ 135 #define MCE_RSP_CMD_ILLEGAL 0xfe /* illegal command for port, 2 bytes */ 136 #define MCE_RSP_TX_TIMEOUT 0x81 /* tx timed out, 2 bytes */ 137 138 /* Misc commands/responses not defined in the MCE remote/transceiver spec */ 139 #define MCE_CMD_SIG_END 0x01 /* End of signal */ 140 #define MCE_CMD_PING 0x03 /* Ping device */ 141 #define MCE_CMD_UNKNOWN 0x04 /* Unknown */ 142 #define MCE_CMD_UNKNOWN2 0x05 /* Unknown */ 143 #define MCE_CMD_UNKNOWN3 0x09 /* Unknown */ 144 #define MCE_CMD_UNKNOWN4 0x0a /* Unknown */ 145 #define MCE_CMD_G_REVISION 0x0b /* Get hw/sw revision */ 146 #define MCE_CMD_UNKNOWN5 0x0e /* Unknown */ 147 #define MCE_CMD_UNKNOWN6 0x0f /* Unknown */ 148 #define MCE_CMD_UNKNOWN8 0x19 /* Unknown */ 149 #define MCE_CMD_UNKNOWN9 0x1b /* Unknown */ 150 #define MCE_CMD_NULL 0x00 /* These show up various places... */ 151 152 /* if buf[i] & MCE_PORT_MASK == 0x80 and buf[i] != MCE_CMD_PORT_IR, 153 * then we're looking at a raw IR data sample */ 154 #define MCE_COMMAND_IRDATA 0x80 155 #define MCE_PACKET_LENGTH_MASK 0x1f /* Packet length mask */ 156 157 /* module parameters */ 158 #ifdef CONFIG_USB_DEBUG 159 static bool debug = 1; 160 #else 161 static bool debug; 162 #endif 163 164 #define mce_dbg(dev, fmt, ...) \ 165 do { \ 166 if (debug) \ 167 dev_info(dev, fmt, ## __VA_ARGS__); \ 168 } while (0) 169 170 /* general constants */ 171 #define SEND_FLAG_IN_PROGRESS 1 172 #define SEND_FLAG_COMPLETE 2 173 #define RECV_FLAG_IN_PROGRESS 3 174 #define RECV_FLAG_COMPLETE 4 175 176 #define MCEUSB_RX 1 177 #define MCEUSB_TX 2 178 179 #define VENDOR_PHILIPS 0x0471 180 #define VENDOR_SMK 0x0609 181 #define VENDOR_TATUNG 0x1460 182 #define VENDOR_GATEWAY 0x107b 183 #define VENDOR_SHUTTLE 0x1308 184 #define VENDOR_SHUTTLE2 0x051c 185 #define VENDOR_MITSUMI 0x03ee 186 #define VENDOR_TOPSEED 0x1784 187 #define VENDOR_RICAVISION 0x179d 188 #define VENDOR_ITRON 0x195d 189 #define VENDOR_FIC 0x1509 190 #define VENDOR_LG 0x043e 191 #define VENDOR_MICROSOFT 0x045e 192 #define VENDOR_FORMOSA 0x147a 193 #define VENDOR_FINTEK 0x1934 194 #define VENDOR_PINNACLE 0x2304 195 #define VENDOR_ECS 0x1019 196 #define VENDOR_WISTRON 0x0fb8 197 #define VENDOR_COMPRO 0x185b 198 #define VENDOR_NORTHSTAR 0x04eb 199 #define VENDOR_REALTEK 0x0bda 200 #define VENDOR_TIVO 0x105a 201 #define VENDOR_CONEXANT 0x0572 202 #define VENDOR_TWISTEDMELON 0x2596 203 204 enum mceusb_model_type { 205 MCE_GEN2 = 0, /* Most boards */ 206 MCE_GEN1, 207 MCE_GEN3, 208 MCE_GEN2_TX_INV, 209 POLARIS_EVK, 210 CX_HYBRID_TV, 211 MULTIFUNCTION, 212 TIVO_KIT, 213 MCE_GEN2_NO_TX, 214 }; 215 216 struct mceusb_model { 217 u32 mce_gen1:1; 218 u32 mce_gen2:1; 219 u32 mce_gen3:1; 220 u32 tx_mask_normal:1; 221 u32 no_tx:1; 222 223 int ir_intfnum; 224 225 const char *rc_map; /* Allow specify a per-board map */ 226 const char *name; /* per-board name */ 227 }; 228 229 static const struct mceusb_model mceusb_model[] = { 230 [MCE_GEN1] = { 231 .mce_gen1 = 1, 232 .tx_mask_normal = 1, 233 }, 234 [MCE_GEN2] = { 235 .mce_gen2 = 1, 236 }, 237 [MCE_GEN2_NO_TX] = { 238 .mce_gen2 = 1, 239 .no_tx = 1, 240 }, 241 [MCE_GEN2_TX_INV] = { 242 .mce_gen2 = 1, 243 .tx_mask_normal = 1, 244 }, 245 [MCE_GEN3] = { 246 .mce_gen3 = 1, 247 .tx_mask_normal = 1, 248 }, 249 [POLARIS_EVK] = { 250 /* 251 * In fact, the EVK is shipped without 252 * remotes, but we should have something handy, 253 * to allow testing it 254 */ 255 .rc_map = RC_MAP_HAUPPAUGE, 256 .name = "Conexant Hybrid TV (cx231xx) MCE IR", 257 }, 258 [CX_HYBRID_TV] = { 259 .no_tx = 1, /* tx isn't wired up at all */ 260 .name = "Conexant Hybrid TV (cx231xx) MCE IR", 261 }, 262 [MULTIFUNCTION] = { 263 .mce_gen2 = 1, 264 .ir_intfnum = 2, 265 }, 266 [TIVO_KIT] = { 267 .mce_gen2 = 1, 268 .rc_map = RC_MAP_TIVO, 269 }, 270 }; 271 272 static struct usb_device_id mceusb_dev_table[] = { 273 /* Original Microsoft MCE IR Transceiver (often HP-branded) */ 274 { USB_DEVICE(VENDOR_MICROSOFT, 0x006d), 275 .driver_info = MCE_GEN1 }, 276 /* Philips Infrared Transceiver - Sahara branded */ 277 { USB_DEVICE(VENDOR_PHILIPS, 0x0608) }, 278 /* Philips Infrared Transceiver - HP branded */ 279 { USB_DEVICE(VENDOR_PHILIPS, 0x060c), 280 .driver_info = MCE_GEN2_TX_INV }, 281 /* Philips SRM5100 */ 282 { USB_DEVICE(VENDOR_PHILIPS, 0x060d) }, 283 /* Philips Infrared Transceiver - Omaura */ 284 { USB_DEVICE(VENDOR_PHILIPS, 0x060f) }, 285 /* Philips Infrared Transceiver - Spinel plus */ 286 { USB_DEVICE(VENDOR_PHILIPS, 0x0613) }, 287 /* Philips eHome Infrared Transceiver */ 288 { USB_DEVICE(VENDOR_PHILIPS, 0x0815) }, 289 /* Philips/Spinel plus IR transceiver for ASUS */ 290 { USB_DEVICE(VENDOR_PHILIPS, 0x206c) }, 291 /* Philips/Spinel plus IR transceiver for ASUS */ 292 { USB_DEVICE(VENDOR_PHILIPS, 0x2088) }, 293 /* Philips IR transceiver (Dell branded) */ 294 { USB_DEVICE(VENDOR_PHILIPS, 0x2093) }, 295 /* Realtek MCE IR Receiver and card reader */ 296 { USB_DEVICE(VENDOR_REALTEK, 0x0161), 297 .driver_info = MULTIFUNCTION }, 298 /* SMK/Toshiba G83C0004D410 */ 299 { USB_DEVICE(VENDOR_SMK, 0x031d), 300 .driver_info = MCE_GEN2_TX_INV }, 301 /* SMK eHome Infrared Transceiver (Sony VAIO) */ 302 { USB_DEVICE(VENDOR_SMK, 0x0322), 303 .driver_info = MCE_GEN2_TX_INV }, 304 /* bundled with Hauppauge PVR-150 */ 305 { USB_DEVICE(VENDOR_SMK, 0x0334), 306 .driver_info = MCE_GEN2_TX_INV }, 307 /* SMK eHome Infrared Transceiver */ 308 { USB_DEVICE(VENDOR_SMK, 0x0338) }, 309 /* SMK/I-O Data GV-MC7/RCKIT Receiver */ 310 { USB_DEVICE(VENDOR_SMK, 0x0353), 311 .driver_info = MCE_GEN2_NO_TX }, 312 /* Tatung eHome Infrared Transceiver */ 313 { USB_DEVICE(VENDOR_TATUNG, 0x9150) }, 314 /* Shuttle eHome Infrared Transceiver */ 315 { USB_DEVICE(VENDOR_SHUTTLE, 0xc001) }, 316 /* Shuttle eHome Infrared Transceiver */ 317 { USB_DEVICE(VENDOR_SHUTTLE2, 0xc001) }, 318 /* Gateway eHome Infrared Transceiver */ 319 { USB_DEVICE(VENDOR_GATEWAY, 0x3009) }, 320 /* Mitsumi */ 321 { USB_DEVICE(VENDOR_MITSUMI, 0x2501) }, 322 /* Topseed eHome Infrared Transceiver */ 323 { USB_DEVICE(VENDOR_TOPSEED, 0x0001), 324 .driver_info = MCE_GEN2_TX_INV }, 325 /* Topseed HP eHome Infrared Transceiver */ 326 { USB_DEVICE(VENDOR_TOPSEED, 0x0006), 327 .driver_info = MCE_GEN2_TX_INV }, 328 /* Topseed eHome Infrared Transceiver */ 329 { USB_DEVICE(VENDOR_TOPSEED, 0x0007), 330 .driver_info = MCE_GEN2_TX_INV }, 331 /* Topseed eHome Infrared Transceiver */ 332 { USB_DEVICE(VENDOR_TOPSEED, 0x0008), 333 .driver_info = MCE_GEN3 }, 334 /* Topseed eHome Infrared Transceiver */ 335 { USB_DEVICE(VENDOR_TOPSEED, 0x000a), 336 .driver_info = MCE_GEN2_TX_INV }, 337 /* Topseed eHome Infrared Transceiver */ 338 { USB_DEVICE(VENDOR_TOPSEED, 0x0011), 339 .driver_info = MCE_GEN3 }, 340 /* Ricavision internal Infrared Transceiver */ 341 { USB_DEVICE(VENDOR_RICAVISION, 0x0010) }, 342 /* Itron ione Libra Q-11 */ 343 { USB_DEVICE(VENDOR_ITRON, 0x7002) }, 344 /* FIC eHome Infrared Transceiver */ 345 { USB_DEVICE(VENDOR_FIC, 0x9242) }, 346 /* LG eHome Infrared Transceiver */ 347 { USB_DEVICE(VENDOR_LG, 0x9803) }, 348 /* Microsoft MCE Infrared Transceiver */ 349 { USB_DEVICE(VENDOR_MICROSOFT, 0x00a0) }, 350 /* Formosa eHome Infrared Transceiver */ 351 { USB_DEVICE(VENDOR_FORMOSA, 0xe015) }, 352 /* Formosa21 / eHome Infrared Receiver */ 353 { USB_DEVICE(VENDOR_FORMOSA, 0xe016) }, 354 /* Formosa aim / Trust MCE Infrared Receiver */ 355 { USB_DEVICE(VENDOR_FORMOSA, 0xe017), 356 .driver_info = MCE_GEN2_NO_TX }, 357 /* Formosa Industrial Computing / Beanbag Emulation Device */ 358 { USB_DEVICE(VENDOR_FORMOSA, 0xe018) }, 359 /* Formosa21 / eHome Infrared Receiver */ 360 { USB_DEVICE(VENDOR_FORMOSA, 0xe03a) }, 361 /* Formosa Industrial Computing AIM IR605/A */ 362 { USB_DEVICE(VENDOR_FORMOSA, 0xe03c) }, 363 /* Formosa Industrial Computing */ 364 { USB_DEVICE(VENDOR_FORMOSA, 0xe03e) }, 365 /* Formosa Industrial Computing */ 366 { USB_DEVICE(VENDOR_FORMOSA, 0xe042) }, 367 /* Fintek eHome Infrared Transceiver (HP branded) */ 368 { USB_DEVICE(VENDOR_FINTEK, 0x5168) }, 369 /* Fintek eHome Infrared Transceiver */ 370 { USB_DEVICE(VENDOR_FINTEK, 0x0602) }, 371 /* Fintek eHome Infrared Transceiver (in the AOpen MP45) */ 372 { USB_DEVICE(VENDOR_FINTEK, 0x0702) }, 373 /* Pinnacle Remote Kit */ 374 { USB_DEVICE(VENDOR_PINNACLE, 0x0225), 375 .driver_info = MCE_GEN3 }, 376 /* Elitegroup Computer Systems IR */ 377 { USB_DEVICE(VENDOR_ECS, 0x0f38) }, 378 /* Wistron Corp. eHome Infrared Receiver */ 379 { USB_DEVICE(VENDOR_WISTRON, 0x0002) }, 380 /* Compro K100 */ 381 { USB_DEVICE(VENDOR_COMPRO, 0x3020) }, 382 /* Compro K100 v2 */ 383 { USB_DEVICE(VENDOR_COMPRO, 0x3082) }, 384 /* Northstar Systems, Inc. eHome Infrared Transceiver */ 385 { USB_DEVICE(VENDOR_NORTHSTAR, 0xe004) }, 386 /* TiVo PC IR Receiver */ 387 { USB_DEVICE(VENDOR_TIVO, 0x2000), 388 .driver_info = TIVO_KIT }, 389 /* Conexant Hybrid TV "Shelby" Polaris SDK */ 390 { USB_DEVICE(VENDOR_CONEXANT, 0x58a1), 391 .driver_info = POLARIS_EVK }, 392 /* Conexant Hybrid TV RDU253S Polaris */ 393 { USB_DEVICE(VENDOR_CONEXANT, 0x58a5), 394 .driver_info = CX_HYBRID_TV }, 395 /* Twisted Melon Inc. - Manta Mini Receiver */ 396 { USB_DEVICE(VENDOR_TWISTEDMELON, 0x8008) }, 397 /* Twisted Melon Inc. - Manta Pico Receiver */ 398 { USB_DEVICE(VENDOR_TWISTEDMELON, 0x8016) }, 399 /* Twisted Melon Inc. - Manta Transceiver */ 400 { USB_DEVICE(VENDOR_TWISTEDMELON, 0x8042) }, 401 /* Terminating entry */ 402 { } 403 }; 404 405 /* data structure for each usb transceiver */ 406 struct mceusb_dev { 407 /* ir-core bits */ 408 struct rc_dev *rc; 409 410 /* optional features we can enable */ 411 bool carrier_report_enabled; 412 bool learning_enabled; 413 414 /* core device bits */ 415 struct device *dev; 416 417 /* usb */ 418 struct usb_device *usbdev; 419 struct urb *urb_in; 420 struct usb_endpoint_descriptor *usb_ep_out; 421 422 /* buffers and dma */ 423 unsigned char *buf_in; 424 unsigned int len_in; 425 dma_addr_t dma_in; 426 427 enum { 428 CMD_HEADER = 0, 429 SUBCMD, 430 CMD_DATA, 431 PARSE_IRDATA, 432 } parser_state; 433 434 u8 cmd, rem; /* Remaining IR data bytes in packet */ 435 436 struct { 437 u32 connected:1; 438 u32 tx_mask_normal:1; 439 u32 microsoft_gen1:1; 440 u32 no_tx:1; 441 } flags; 442 443 /* transmit support */ 444 int send_flags; 445 u32 carrier; 446 unsigned char tx_mask; 447 448 char name[128]; 449 char phys[64]; 450 enum mceusb_model_type model; 451 452 bool need_reset; /* flag to issue a device resume cmd */ 453 u8 emver; /* emulator interface version */ 454 u8 num_txports; /* number of transmit ports */ 455 u8 num_rxports; /* number of receive sensors */ 456 u8 txports_cabled; /* bitmask of transmitters with cable */ 457 u8 rxports_active; /* bitmask of active receive sensors */ 458 }; 459 460 /* MCE Device Command Strings, generally a port and command pair */ 461 static char DEVICE_RESUME[] = {MCE_CMD_NULL, MCE_CMD_PORT_SYS, 462 MCE_CMD_RESUME}; 463 static char GET_REVISION[] = {MCE_CMD_PORT_SYS, MCE_CMD_G_REVISION}; 464 static char GET_EMVER[] = {MCE_CMD_PORT_SYS, MCE_CMD_GETEMVER}; 465 static char GET_WAKEVERSION[] = {MCE_CMD_PORT_SYS, MCE_CMD_GETWAKEVERSION}; 466 static char FLASH_LED[] = {MCE_CMD_PORT_SYS, MCE_CMD_FLASHLED}; 467 static char GET_UNKNOWN2[] = {MCE_CMD_PORT_IR, MCE_CMD_UNKNOWN2}; 468 static char GET_CARRIER_FREQ[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRCFS}; 469 static char GET_RX_TIMEOUT[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRTIMEOUT}; 470 static char GET_NUM_PORTS[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRNUMPORTS}; 471 static char GET_TX_BITMASK[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRTXPORTS}; 472 static char GET_RX_SENSOR[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRRXPORTEN}; 473 /* sub in desired values in lower byte or bytes for full command */ 474 /* FIXME: make use of these for transmit. 475 static char SET_CARRIER_FREQ[] = {MCE_CMD_PORT_IR, 476 MCE_CMD_SETIRCFS, 0x00, 0x00}; 477 static char SET_TX_BITMASK[] = {MCE_CMD_PORT_IR, MCE_CMD_SETIRTXPORTS, 0x00}; 478 static char SET_RX_TIMEOUT[] = {MCE_CMD_PORT_IR, 479 MCE_CMD_SETIRTIMEOUT, 0x00, 0x00}; 480 static char SET_RX_SENSOR[] = {MCE_CMD_PORT_IR, 481 MCE_RSP_EQIRRXPORTEN, 0x00}; 482 */ 483 484 static int mceusb_cmdsize(u8 cmd, u8 subcmd) 485 { 486 int datasize = 0; 487 488 switch (cmd) { 489 case MCE_CMD_NULL: 490 if (subcmd == MCE_CMD_PORT_SYS) 491 datasize = 1; 492 break; 493 case MCE_CMD_PORT_SYS: 494 switch (subcmd) { 495 case MCE_RSP_EQWAKEVERSION: 496 datasize = 4; 497 break; 498 case MCE_CMD_G_REVISION: 499 datasize = 2; 500 break; 501 case MCE_RSP_EQWAKESUPPORT: 502 datasize = 1; 503 break; 504 } 505 case MCE_CMD_PORT_IR: 506 switch (subcmd) { 507 case MCE_CMD_UNKNOWN: 508 case MCE_RSP_EQIRCFS: 509 case MCE_RSP_EQIRTIMEOUT: 510 case MCE_RSP_EQIRRXCFCNT: 511 datasize = 2; 512 break; 513 case MCE_CMD_SIG_END: 514 case MCE_RSP_EQIRTXPORTS: 515 case MCE_RSP_EQIRRXPORTEN: 516 datasize = 1; 517 break; 518 } 519 } 520 return datasize; 521 } 522 523 static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf, 524 int offset, int len, bool out) 525 { 526 char codes[USB_BUFLEN * 3 + 1]; 527 char inout[9]; 528 u8 cmd, subcmd, data1, data2, data3, data4; 529 struct device *dev = ir->dev; 530 int i, start, skip = 0; 531 u32 carrier, period; 532 533 if (!debug) 534 return; 535 536 /* skip meaningless 0xb1 0x60 header bytes on orig receiver */ 537 if (ir->flags.microsoft_gen1 && !out && !offset) 538 skip = 2; 539 540 if (len <= skip) 541 return; 542 543 for (i = 0; i < len && i < USB_BUFLEN; i++) 544 snprintf(codes + i * 3, 4, "%02x ", buf[i + offset] & 0xff); 545 546 dev_info(dev, "%sx data: %s(length=%d)\n", 547 (out ? "t" : "r"), codes, len); 548 549 if (out) 550 strcpy(inout, "Request\0"); 551 else 552 strcpy(inout, "Got\0"); 553 554 start = offset + skip; 555 cmd = buf[start] & 0xff; 556 subcmd = buf[start + 1] & 0xff; 557 data1 = buf[start + 2] & 0xff; 558 data2 = buf[start + 3] & 0xff; 559 data3 = buf[start + 4] & 0xff; 560 data4 = buf[start + 5] & 0xff; 561 562 switch (cmd) { 563 case MCE_CMD_NULL: 564 if (subcmd == MCE_CMD_NULL) 565 break; 566 if ((subcmd == MCE_CMD_PORT_SYS) && 567 (data1 == MCE_CMD_RESUME)) 568 dev_info(dev, "Device resume requested\n"); 569 else 570 dev_info(dev, "Unknown command 0x%02x 0x%02x\n", 571 cmd, subcmd); 572 break; 573 case MCE_CMD_PORT_SYS: 574 switch (subcmd) { 575 case MCE_RSP_EQEMVER: 576 if (!out) 577 dev_info(dev, "Emulator interface version %x\n", 578 data1); 579 break; 580 case MCE_CMD_G_REVISION: 581 if (len == 2) 582 dev_info(dev, "Get hw/sw rev?\n"); 583 else 584 dev_info(dev, "hw/sw rev 0x%02x 0x%02x " 585 "0x%02x 0x%02x\n", data1, data2, 586 buf[start + 4], buf[start + 5]); 587 break; 588 case MCE_CMD_RESUME: 589 dev_info(dev, "Device resume requested\n"); 590 break; 591 case MCE_RSP_CMD_ILLEGAL: 592 dev_info(dev, "Illegal PORT_SYS command\n"); 593 break; 594 case MCE_RSP_EQWAKEVERSION: 595 if (!out) 596 dev_info(dev, "Wake version, proto: 0x%02x, " 597 "payload: 0x%02x, address: 0x%02x, " 598 "version: 0x%02x\n", 599 data1, data2, data3, data4); 600 break; 601 case MCE_RSP_GETPORTSTATUS: 602 if (!out) 603 /* We use data1 + 1 here, to match hw labels */ 604 dev_info(dev, "TX port %d: blaster is%s connected\n", 605 data1 + 1, data4 ? " not" : ""); 606 break; 607 case MCE_CMD_FLASHLED: 608 dev_info(dev, "Attempting to flash LED\n"); 609 break; 610 default: 611 dev_info(dev, "Unknown command 0x%02x 0x%02x\n", 612 cmd, subcmd); 613 break; 614 } 615 break; 616 case MCE_CMD_PORT_IR: 617 switch (subcmd) { 618 case MCE_CMD_SIG_END: 619 dev_info(dev, "End of signal\n"); 620 break; 621 case MCE_CMD_PING: 622 dev_info(dev, "Ping\n"); 623 break; 624 case MCE_CMD_UNKNOWN: 625 dev_info(dev, "Resp to 9f 05 of 0x%02x 0x%02x\n", 626 data1, data2); 627 break; 628 case MCE_RSP_EQIRCFS: 629 period = DIV_ROUND_CLOSEST( 630 (1U << data1 * 2) * (data2 + 1), 10); 631 if (!period) 632 break; 633 carrier = (1000 * 1000) / period; 634 dev_info(dev, "%s carrier of %u Hz (period %uus)\n", 635 inout, carrier, period); 636 break; 637 case MCE_CMD_GETIRCFS: 638 dev_info(dev, "Get carrier mode and freq\n"); 639 break; 640 case MCE_RSP_EQIRTXPORTS: 641 dev_info(dev, "%s transmit blaster mask of 0x%02x\n", 642 inout, data1); 643 break; 644 case MCE_RSP_EQIRTIMEOUT: 645 /* value is in units of 50us, so x*50/1000 ms */ 646 period = ((data1 << 8) | data2) * MCE_TIME_UNIT / 1000; 647 dev_info(dev, "%s receive timeout of %d ms\n", 648 inout, period); 649 break; 650 case MCE_CMD_GETIRTIMEOUT: 651 dev_info(dev, "Get receive timeout\n"); 652 break; 653 case MCE_CMD_GETIRTXPORTS: 654 dev_info(dev, "Get transmit blaster mask\n"); 655 break; 656 case MCE_RSP_EQIRRXPORTEN: 657 dev_info(dev, "%s %s-range receive sensor in use\n", 658 inout, data1 == 0x02 ? "short" : "long"); 659 break; 660 case MCE_CMD_GETIRRXPORTEN: 661 /* aka MCE_RSP_EQIRRXCFCNT */ 662 if (out) 663 dev_info(dev, "Get receive sensor\n"); 664 else if (ir->learning_enabled) 665 dev_info(dev, "RX pulse count: %d\n", 666 ((data1 << 8) | data2)); 667 break; 668 case MCE_RSP_EQIRNUMPORTS: 669 if (out) 670 break; 671 dev_info(dev, "Num TX ports: %x, num RX ports: %x\n", 672 data1, data2); 673 break; 674 case MCE_RSP_CMD_ILLEGAL: 675 dev_info(dev, "Illegal PORT_IR command\n"); 676 break; 677 default: 678 dev_info(dev, "Unknown command 0x%02x 0x%02x\n", 679 cmd, subcmd); 680 break; 681 } 682 break; 683 default: 684 break; 685 } 686 687 if (cmd == MCE_IRDATA_TRAILER) 688 dev_info(dev, "End of raw IR data\n"); 689 else if ((cmd != MCE_CMD_PORT_IR) && 690 ((cmd & MCE_PORT_MASK) == MCE_COMMAND_IRDATA)) 691 dev_info(dev, "Raw IR data, %d pulse/space samples\n", ir->rem); 692 } 693 694 static void mce_async_callback(struct urb *urb) 695 { 696 struct mceusb_dev *ir; 697 int len; 698 699 if (!urb) 700 return; 701 702 ir = urb->context; 703 if (ir) { 704 len = urb->actual_length; 705 706 mceusb_dev_printdata(ir, urb->transfer_buffer, 0, len, true); 707 } 708 709 /* the transfer buffer and urb were allocated in mce_request_packet */ 710 kfree(urb->transfer_buffer); 711 usb_free_urb(urb); 712 } 713 714 /* request incoming or send outgoing usb packet - used to initialize remote */ 715 static void mce_request_packet(struct mceusb_dev *ir, unsigned char *data, 716 int size, int urb_type) 717 { 718 int res, pipe; 719 struct urb *async_urb; 720 struct device *dev = ir->dev; 721 unsigned char *async_buf; 722 723 if (urb_type == MCEUSB_TX) { 724 async_urb = usb_alloc_urb(0, GFP_KERNEL); 725 if (unlikely(!async_urb)) { 726 dev_err(dev, "Error, couldn't allocate urb!\n"); 727 return; 728 } 729 730 async_buf = kzalloc(size, GFP_KERNEL); 731 if (!async_buf) { 732 dev_err(dev, "Error, couldn't allocate buf!\n"); 733 usb_free_urb(async_urb); 734 return; 735 } 736 737 /* outbound data */ 738 pipe = usb_sndintpipe(ir->usbdev, 739 ir->usb_ep_out->bEndpointAddress); 740 usb_fill_int_urb(async_urb, ir->usbdev, pipe, 741 async_buf, size, mce_async_callback, 742 ir, ir->usb_ep_out->bInterval); 743 memcpy(async_buf, data, size); 744 745 } else if (urb_type == MCEUSB_RX) { 746 /* standard request */ 747 async_urb = ir->urb_in; 748 ir->send_flags = RECV_FLAG_IN_PROGRESS; 749 750 } else { 751 dev_err(dev, "Error! Unknown urb type %d\n", urb_type); 752 return; 753 } 754 755 mce_dbg(dev, "receive request called (size=%#x)\n", size); 756 757 async_urb->transfer_buffer_length = size; 758 async_urb->dev = ir->usbdev; 759 760 res = usb_submit_urb(async_urb, GFP_ATOMIC); 761 if (res) { 762 mce_dbg(dev, "receive request FAILED! (res=%d)\n", res); 763 return; 764 } 765 mce_dbg(dev, "receive request complete (res=%d)\n", res); 766 } 767 768 static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size) 769 { 770 int rsize = sizeof(DEVICE_RESUME); 771 772 if (ir->need_reset) { 773 ir->need_reset = false; 774 mce_request_packet(ir, DEVICE_RESUME, rsize, MCEUSB_TX); 775 msleep(10); 776 } 777 778 mce_request_packet(ir, data, size, MCEUSB_TX); 779 msleep(10); 780 } 781 782 static void mce_flush_rx_buffer(struct mceusb_dev *ir, int size) 783 { 784 mce_request_packet(ir, NULL, size, MCEUSB_RX); 785 } 786 787 /* Send data out the IR blaster port(s) */ 788 static int mceusb_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned count) 789 { 790 struct mceusb_dev *ir = dev->priv; 791 int i, ret = 0; 792 int cmdcount = 0; 793 unsigned char *cmdbuf; /* MCE command buffer */ 794 795 cmdbuf = kzalloc(sizeof(unsigned) * MCE_CMDBUF_SIZE, GFP_KERNEL); 796 if (!cmdbuf) 797 return -ENOMEM; 798 799 /* MCE tx init header */ 800 cmdbuf[cmdcount++] = MCE_CMD_PORT_IR; 801 cmdbuf[cmdcount++] = MCE_CMD_SETIRTXPORTS; 802 cmdbuf[cmdcount++] = ir->tx_mask; 803 804 /* Generate mce packet data */ 805 for (i = 0; (i < count) && (cmdcount < MCE_CMDBUF_SIZE); i++) { 806 txbuf[i] = txbuf[i] / MCE_TIME_UNIT; 807 808 do { /* loop to support long pulses/spaces > 127*50us=6.35ms */ 809 810 /* Insert mce packet header every 4th entry */ 811 if ((cmdcount < MCE_CMDBUF_SIZE) && 812 (cmdcount - MCE_TX_HEADER_LENGTH) % 813 MCE_CODE_LENGTH == 0) 814 cmdbuf[cmdcount++] = MCE_IRDATA_HEADER; 815 816 /* Insert mce packet data */ 817 if (cmdcount < MCE_CMDBUF_SIZE) 818 cmdbuf[cmdcount++] = 819 (txbuf[i] < MCE_PULSE_BIT ? 820 txbuf[i] : MCE_MAX_PULSE_LENGTH) | 821 (i & 1 ? 0x00 : MCE_PULSE_BIT); 822 else { 823 ret = -EINVAL; 824 goto out; 825 } 826 827 } while ((txbuf[i] > MCE_MAX_PULSE_LENGTH) && 828 (txbuf[i] -= MCE_MAX_PULSE_LENGTH)); 829 } 830 831 /* Fix packet length in last header */ 832 cmdbuf[cmdcount - (cmdcount - MCE_TX_HEADER_LENGTH) % MCE_CODE_LENGTH] = 833 MCE_COMMAND_IRDATA + (cmdcount - MCE_TX_HEADER_LENGTH) % 834 MCE_CODE_LENGTH - 1; 835 836 /* Check if we have room for the empty packet at the end */ 837 if (cmdcount >= MCE_CMDBUF_SIZE) { 838 ret = -EINVAL; 839 goto out; 840 } 841 842 /* All mce commands end with an empty packet (0x80) */ 843 cmdbuf[cmdcount++] = MCE_IRDATA_TRAILER; 844 845 /* Transmit the command to the mce device */ 846 mce_async_out(ir, cmdbuf, cmdcount); 847 848 out: 849 kfree(cmdbuf); 850 return ret ? ret : count; 851 } 852 853 /* Sets active IR outputs -- mce devices typically have two */ 854 static int mceusb_set_tx_mask(struct rc_dev *dev, u32 mask) 855 { 856 struct mceusb_dev *ir = dev->priv; 857 858 if (ir->flags.tx_mask_normal) 859 ir->tx_mask = mask; 860 else 861 ir->tx_mask = (mask != MCE_DEFAULT_TX_MASK ? 862 mask ^ MCE_DEFAULT_TX_MASK : mask) << 1; 863 864 return 0; 865 } 866 867 /* Sets the send carrier frequency and mode */ 868 static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier) 869 { 870 struct mceusb_dev *ir = dev->priv; 871 int clk = 10000000; 872 int prescaler = 0, divisor = 0; 873 unsigned char cmdbuf[4] = { MCE_CMD_PORT_IR, 874 MCE_CMD_SETIRCFS, 0x00, 0x00 }; 875 876 /* Carrier has changed */ 877 if (ir->carrier != carrier) { 878 879 if (carrier == 0) { 880 ir->carrier = carrier; 881 cmdbuf[2] = MCE_CMD_SIG_END; 882 cmdbuf[3] = MCE_IRDATA_TRAILER; 883 mce_dbg(ir->dev, "%s: disabling carrier " 884 "modulation\n", __func__); 885 mce_async_out(ir, cmdbuf, sizeof(cmdbuf)); 886 return carrier; 887 } 888 889 for (prescaler = 0; prescaler < 4; ++prescaler) { 890 divisor = (clk >> (2 * prescaler)) / carrier; 891 if (divisor <= 0xff) { 892 ir->carrier = carrier; 893 cmdbuf[2] = prescaler; 894 cmdbuf[3] = divisor; 895 mce_dbg(ir->dev, "%s: requesting %u HZ " 896 "carrier\n", __func__, carrier); 897 898 /* Transmit new carrier to mce device */ 899 mce_async_out(ir, cmdbuf, sizeof(cmdbuf)); 900 return carrier; 901 } 902 } 903 904 return -EINVAL; 905 906 } 907 908 return carrier; 909 } 910 911 /* 912 * We don't do anything but print debug spew for many of the command bits 913 * we receive from the hardware, but some of them are useful information 914 * we want to store so that we can use them. 915 */ 916 static void mceusb_handle_command(struct mceusb_dev *ir, int index) 917 { 918 u8 hi = ir->buf_in[index + 1] & 0xff; 919 u8 lo = ir->buf_in[index + 2] & 0xff; 920 921 switch (ir->buf_in[index]) { 922 /* the one and only 5-byte return value command */ 923 case MCE_RSP_GETPORTSTATUS: 924 if ((ir->buf_in[index + 4] & 0xff) == 0x00) 925 ir->txports_cabled |= 1 << hi; 926 break; 927 928 /* 2-byte return value commands */ 929 case MCE_RSP_EQIRTIMEOUT: 930 ir->rc->timeout = US_TO_NS((hi << 8 | lo) * MCE_TIME_UNIT); 931 break; 932 case MCE_RSP_EQIRNUMPORTS: 933 ir->num_txports = hi; 934 ir->num_rxports = lo; 935 break; 936 937 /* 1-byte return value commands */ 938 case MCE_RSP_EQEMVER: 939 ir->emver = hi; 940 break; 941 case MCE_RSP_EQIRTXPORTS: 942 ir->tx_mask = hi; 943 break; 944 case MCE_RSP_EQIRRXPORTEN: 945 ir->learning_enabled = ((hi & 0x02) == 0x02); 946 ir->rxports_active = hi; 947 break; 948 case MCE_RSP_CMD_ILLEGAL: 949 ir->need_reset = true; 950 break; 951 default: 952 break; 953 } 954 } 955 956 static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len) 957 { 958 DEFINE_IR_RAW_EVENT(rawir); 959 bool event = false; 960 int i = 0; 961 962 /* skip meaningless 0xb1 0x60 header bytes on orig receiver */ 963 if (ir->flags.microsoft_gen1) 964 i = 2; 965 966 /* if there's no data, just return now */ 967 if (buf_len <= i) 968 return; 969 970 for (; i < buf_len; i++) { 971 switch (ir->parser_state) { 972 case SUBCMD: 973 ir->rem = mceusb_cmdsize(ir->cmd, ir->buf_in[i]); 974 mceusb_dev_printdata(ir, ir->buf_in, i - 1, 975 ir->rem + 2, false); 976 mceusb_handle_command(ir, i); 977 ir->parser_state = CMD_DATA; 978 break; 979 case PARSE_IRDATA: 980 ir->rem--; 981 init_ir_raw_event(&rawir); 982 rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0); 983 rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK) 984 * US_TO_NS(MCE_TIME_UNIT); 985 986 mce_dbg(ir->dev, "Storing %s with duration %d\n", 987 rawir.pulse ? "pulse" : "space", 988 rawir.duration); 989 990 if (ir_raw_event_store_with_filter(ir->rc, &rawir)) 991 event = true; 992 break; 993 case CMD_DATA: 994 ir->rem--; 995 break; 996 case CMD_HEADER: 997 /* decode mce packets of the form (84),AA,BB,CC,DD */ 998 /* IR data packets can span USB messages - rem */ 999 ir->cmd = ir->buf_in[i]; 1000 if ((ir->cmd == MCE_CMD_PORT_IR) || 1001 ((ir->cmd & MCE_PORT_MASK) != 1002 MCE_COMMAND_IRDATA)) { 1003 ir->parser_state = SUBCMD; 1004 continue; 1005 } 1006 ir->rem = (ir->cmd & MCE_PACKET_LENGTH_MASK); 1007 mceusb_dev_printdata(ir, ir->buf_in, 1008 i, ir->rem + 1, false); 1009 if (ir->rem) 1010 ir->parser_state = PARSE_IRDATA; 1011 else 1012 ir_raw_event_reset(ir->rc); 1013 break; 1014 } 1015 1016 if (ir->parser_state != CMD_HEADER && !ir->rem) 1017 ir->parser_state = CMD_HEADER; 1018 } 1019 if (event) { 1020 mce_dbg(ir->dev, "processed IR data, calling ir_raw_event_handle\n"); 1021 ir_raw_event_handle(ir->rc); 1022 } 1023 } 1024 1025 static void mceusb_dev_recv(struct urb *urb) 1026 { 1027 struct mceusb_dev *ir; 1028 int buf_len; 1029 1030 if (!urb) 1031 return; 1032 1033 ir = urb->context; 1034 if (!ir) { 1035 usb_unlink_urb(urb); 1036 return; 1037 } 1038 1039 buf_len = urb->actual_length; 1040 1041 if (ir->send_flags == RECV_FLAG_IN_PROGRESS) { 1042 ir->send_flags = SEND_FLAG_COMPLETE; 1043 mce_dbg(ir->dev, "setup answer received %d bytes\n", 1044 buf_len); 1045 } 1046 1047 switch (urb->status) { 1048 /* success */ 1049 case 0: 1050 mceusb_process_ir_data(ir, buf_len); 1051 break; 1052 1053 case -ECONNRESET: 1054 case -ENOENT: 1055 case -ESHUTDOWN: 1056 usb_unlink_urb(urb); 1057 return; 1058 1059 case -EPIPE: 1060 default: 1061 mce_dbg(ir->dev, "Error: urb status = %d\n", urb->status); 1062 break; 1063 } 1064 1065 usb_submit_urb(urb, GFP_ATOMIC); 1066 } 1067 1068 static void mceusb_get_emulator_version(struct mceusb_dev *ir) 1069 { 1070 /* If we get no reply or an illegal command reply, its ver 1, says MS */ 1071 ir->emver = 1; 1072 mce_async_out(ir, GET_EMVER, sizeof(GET_EMVER)); 1073 } 1074 1075 static void mceusb_gen1_init(struct mceusb_dev *ir) 1076 { 1077 int ret; 1078 struct device *dev = ir->dev; 1079 char *data; 1080 1081 data = kzalloc(USB_CTRL_MSG_SZ, GFP_KERNEL); 1082 if (!data) { 1083 dev_err(dev, "%s: memory allocation failed!\n", __func__); 1084 return; 1085 } 1086 1087 /* 1088 * This is a strange one. Windows issues a set address to the device 1089 * on the receive control pipe and expect a certain value pair back 1090 */ 1091 ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0), 1092 USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0, 1093 data, USB_CTRL_MSG_SZ, HZ * 3); 1094 mce_dbg(dev, "%s - ret = %d\n", __func__, ret); 1095 mce_dbg(dev, "%s - data[0] = %d, data[1] = %d\n", 1096 __func__, data[0], data[1]); 1097 1098 /* set feature: bit rate 38400 bps */ 1099 ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), 1100 USB_REQ_SET_FEATURE, USB_TYPE_VENDOR, 1101 0xc04e, 0x0000, NULL, 0, HZ * 3); 1102 1103 mce_dbg(dev, "%s - ret = %d\n", __func__, ret); 1104 1105 /* bRequest 4: set char length to 8 bits */ 1106 ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), 1107 4, USB_TYPE_VENDOR, 1108 0x0808, 0x0000, NULL, 0, HZ * 3); 1109 mce_dbg(dev, "%s - retB = %d\n", __func__, ret); 1110 1111 /* bRequest 2: set handshaking to use DTR/DSR */ 1112 ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), 1113 2, USB_TYPE_VENDOR, 1114 0x0000, 0x0100, NULL, 0, HZ * 3); 1115 mce_dbg(dev, "%s - retC = %d\n", __func__, ret); 1116 1117 /* device resume */ 1118 mce_async_out(ir, DEVICE_RESUME, sizeof(DEVICE_RESUME)); 1119 1120 /* get hw/sw revision? */ 1121 mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION)); 1122 1123 kfree(data); 1124 }; 1125 1126 static void mceusb_gen2_init(struct mceusb_dev *ir) 1127 { 1128 /* device resume */ 1129 mce_async_out(ir, DEVICE_RESUME, sizeof(DEVICE_RESUME)); 1130 1131 /* get hw/sw revision? */ 1132 mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION)); 1133 1134 /* get wake version (protocol, key, address) */ 1135 mce_async_out(ir, GET_WAKEVERSION, sizeof(GET_WAKEVERSION)); 1136 1137 /* unknown what this one actually returns... */ 1138 mce_async_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2)); 1139 } 1140 1141 static void mceusb_get_parameters(struct mceusb_dev *ir) 1142 { 1143 int i; 1144 unsigned char cmdbuf[3] = { MCE_CMD_PORT_SYS, 1145 MCE_CMD_GETPORTSTATUS, 0x00 }; 1146 1147 /* defaults, if the hardware doesn't support querying */ 1148 ir->num_txports = 2; 1149 ir->num_rxports = 2; 1150 1151 /* get number of tx and rx ports */ 1152 mce_async_out(ir, GET_NUM_PORTS, sizeof(GET_NUM_PORTS)); 1153 1154 /* get the carrier and frequency */ 1155 mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ)); 1156 1157 if (ir->num_txports && !ir->flags.no_tx) 1158 /* get the transmitter bitmask */ 1159 mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK)); 1160 1161 /* get receiver timeout value */ 1162 mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT)); 1163 1164 /* get receiver sensor setting */ 1165 mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR)); 1166 1167 for (i = 0; i < ir->num_txports; i++) { 1168 cmdbuf[2] = i; 1169 mce_async_out(ir, cmdbuf, sizeof(cmdbuf)); 1170 } 1171 } 1172 1173 static void mceusb_flash_led(struct mceusb_dev *ir) 1174 { 1175 if (ir->emver < 2) 1176 return; 1177 1178 mce_async_out(ir, FLASH_LED, sizeof(FLASH_LED)); 1179 } 1180 1181 static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir) 1182 { 1183 struct device *dev = ir->dev; 1184 struct rc_dev *rc; 1185 int ret; 1186 1187 rc = rc_allocate_device(); 1188 if (!rc) { 1189 dev_err(dev, "remote dev allocation failed\n"); 1190 goto out; 1191 } 1192 1193 snprintf(ir->name, sizeof(ir->name), "%s (%04x:%04x)", 1194 mceusb_model[ir->model].name ? 1195 mceusb_model[ir->model].name : 1196 "Media Center Ed. eHome Infrared Remote Transceiver", 1197 le16_to_cpu(ir->usbdev->descriptor.idVendor), 1198 le16_to_cpu(ir->usbdev->descriptor.idProduct)); 1199 1200 usb_make_path(ir->usbdev, ir->phys, sizeof(ir->phys)); 1201 1202 rc->input_name = ir->name; 1203 rc->input_phys = ir->phys; 1204 usb_to_input_id(ir->usbdev, &rc->input_id); 1205 rc->dev.parent = dev; 1206 rc->priv = ir; 1207 rc->driver_type = RC_DRIVER_IR_RAW; 1208 rc->allowed_protos = RC_BIT_ALL; 1209 rc->timeout = MS_TO_NS(100); 1210 if (!ir->flags.no_tx) { 1211 rc->s_tx_mask = mceusb_set_tx_mask; 1212 rc->s_tx_carrier = mceusb_set_tx_carrier; 1213 rc->tx_ir = mceusb_tx_ir; 1214 } 1215 rc->driver_name = DRIVER_NAME; 1216 rc->map_name = mceusb_model[ir->model].rc_map ? 1217 mceusb_model[ir->model].rc_map : RC_MAP_RC6_MCE; 1218 1219 ret = rc_register_device(rc); 1220 if (ret < 0) { 1221 dev_err(dev, "remote dev registration failed\n"); 1222 goto out; 1223 } 1224 1225 return rc; 1226 1227 out: 1228 rc_free_device(rc); 1229 return NULL; 1230 } 1231 1232 static int mceusb_dev_probe(struct usb_interface *intf, 1233 const struct usb_device_id *id) 1234 { 1235 struct usb_device *dev = interface_to_usbdev(intf); 1236 struct usb_host_interface *idesc; 1237 struct usb_endpoint_descriptor *ep = NULL; 1238 struct usb_endpoint_descriptor *ep_in = NULL; 1239 struct usb_endpoint_descriptor *ep_out = NULL; 1240 struct mceusb_dev *ir = NULL; 1241 int pipe, maxp, i; 1242 char buf[63], name[128] = ""; 1243 enum mceusb_model_type model = id->driver_info; 1244 bool is_gen3; 1245 bool is_microsoft_gen1; 1246 bool tx_mask_normal; 1247 int ir_intfnum; 1248 1249 mce_dbg(&intf->dev, "%s called\n", __func__); 1250 1251 idesc = intf->cur_altsetting; 1252 1253 is_gen3 = mceusb_model[model].mce_gen3; 1254 is_microsoft_gen1 = mceusb_model[model].mce_gen1; 1255 tx_mask_normal = mceusb_model[model].tx_mask_normal; 1256 ir_intfnum = mceusb_model[model].ir_intfnum; 1257 1258 /* There are multi-function devices with non-IR interfaces */ 1259 if (idesc->desc.bInterfaceNumber != ir_intfnum) 1260 return -ENODEV; 1261 1262 /* step through the endpoints to find first bulk in and out endpoint */ 1263 for (i = 0; i < idesc->desc.bNumEndpoints; ++i) { 1264 ep = &idesc->endpoint[i].desc; 1265 1266 if ((ep_in == NULL) 1267 && ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) 1268 == USB_DIR_IN) 1269 && (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) 1270 == USB_ENDPOINT_XFER_BULK) 1271 || ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) 1272 == USB_ENDPOINT_XFER_INT))) { 1273 1274 ep_in = ep; 1275 ep_in->bmAttributes = USB_ENDPOINT_XFER_INT; 1276 ep_in->bInterval = 1; 1277 mce_dbg(&intf->dev, "acceptable inbound endpoint " 1278 "found\n"); 1279 } 1280 1281 if ((ep_out == NULL) 1282 && ((ep->bEndpointAddress & USB_ENDPOINT_DIR_MASK) 1283 == USB_DIR_OUT) 1284 && (((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) 1285 == USB_ENDPOINT_XFER_BULK) 1286 || ((ep->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK) 1287 == USB_ENDPOINT_XFER_INT))) { 1288 1289 ep_out = ep; 1290 ep_out->bmAttributes = USB_ENDPOINT_XFER_INT; 1291 ep_out->bInterval = 1; 1292 mce_dbg(&intf->dev, "acceptable outbound endpoint " 1293 "found\n"); 1294 } 1295 } 1296 if (ep_in == NULL) { 1297 mce_dbg(&intf->dev, "inbound and/or endpoint not found\n"); 1298 return -ENODEV; 1299 } 1300 1301 pipe = usb_rcvintpipe(dev, ep_in->bEndpointAddress); 1302 maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); 1303 1304 ir = kzalloc(sizeof(struct mceusb_dev), GFP_KERNEL); 1305 if (!ir) 1306 goto mem_alloc_fail; 1307 1308 ir->buf_in = usb_alloc_coherent(dev, maxp, GFP_ATOMIC, &ir->dma_in); 1309 if (!ir->buf_in) 1310 goto buf_in_alloc_fail; 1311 1312 ir->urb_in = usb_alloc_urb(0, GFP_KERNEL); 1313 if (!ir->urb_in) 1314 goto urb_in_alloc_fail; 1315 1316 ir->usbdev = dev; 1317 ir->dev = &intf->dev; 1318 ir->len_in = maxp; 1319 ir->flags.microsoft_gen1 = is_microsoft_gen1; 1320 ir->flags.tx_mask_normal = tx_mask_normal; 1321 ir->flags.no_tx = mceusb_model[model].no_tx; 1322 ir->model = model; 1323 1324 /* Saving usb interface data for use by the transmitter routine */ 1325 ir->usb_ep_out = ep_out; 1326 1327 if (dev->descriptor.iManufacturer 1328 && usb_string(dev, dev->descriptor.iManufacturer, 1329 buf, sizeof(buf)) > 0) 1330 strlcpy(name, buf, sizeof(name)); 1331 if (dev->descriptor.iProduct 1332 && usb_string(dev, dev->descriptor.iProduct, 1333 buf, sizeof(buf)) > 0) 1334 snprintf(name + strlen(name), sizeof(name) - strlen(name), 1335 " %s", buf); 1336 1337 ir->rc = mceusb_init_rc_dev(ir); 1338 if (!ir->rc) 1339 goto rc_dev_fail; 1340 1341 /* wire up inbound data handler */ 1342 usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in, maxp, 1343 mceusb_dev_recv, ir, ep_in->bInterval); 1344 ir->urb_in->transfer_dma = ir->dma_in; 1345 ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; 1346 1347 /* flush buffers on the device */ 1348 mce_dbg(&intf->dev, "Flushing receive buffers\n"); 1349 mce_flush_rx_buffer(ir, maxp); 1350 1351 /* figure out which firmware/emulator version this hardware has */ 1352 mceusb_get_emulator_version(ir); 1353 1354 /* initialize device */ 1355 if (ir->flags.microsoft_gen1) 1356 mceusb_gen1_init(ir); 1357 else if (!is_gen3) 1358 mceusb_gen2_init(ir); 1359 1360 mceusb_get_parameters(ir); 1361 1362 mceusb_flash_led(ir); 1363 1364 if (!ir->flags.no_tx) 1365 mceusb_set_tx_mask(ir->rc, MCE_DEFAULT_TX_MASK); 1366 1367 usb_set_intfdata(intf, ir); 1368 1369 /* enable wake via this device */ 1370 device_set_wakeup_capable(ir->dev, true); 1371 device_set_wakeup_enable(ir->dev, true); 1372 1373 dev_info(&intf->dev, "Registered %s with mce emulator interface " 1374 "version %x\n", name, ir->emver); 1375 dev_info(&intf->dev, "%x tx ports (0x%x cabled) and " 1376 "%x rx sensors (0x%x active)\n", 1377 ir->num_txports, ir->txports_cabled, 1378 ir->num_rxports, ir->rxports_active); 1379 1380 return 0; 1381 1382 /* Error-handling path */ 1383 rc_dev_fail: 1384 usb_free_urb(ir->urb_in); 1385 urb_in_alloc_fail: 1386 usb_free_coherent(dev, maxp, ir->buf_in, ir->dma_in); 1387 buf_in_alloc_fail: 1388 kfree(ir); 1389 mem_alloc_fail: 1390 dev_err(&intf->dev, "%s: device setup failed!\n", __func__); 1391 1392 return -ENOMEM; 1393 } 1394 1395 1396 static void mceusb_dev_disconnect(struct usb_interface *intf) 1397 { 1398 struct usb_device *dev = interface_to_usbdev(intf); 1399 struct mceusb_dev *ir = usb_get_intfdata(intf); 1400 1401 usb_set_intfdata(intf, NULL); 1402 1403 if (!ir) 1404 return; 1405 1406 ir->usbdev = NULL; 1407 rc_unregister_device(ir->rc); 1408 usb_kill_urb(ir->urb_in); 1409 usb_free_urb(ir->urb_in); 1410 usb_free_coherent(dev, ir->len_in, ir->buf_in, ir->dma_in); 1411 1412 kfree(ir); 1413 } 1414 1415 static int mceusb_dev_suspend(struct usb_interface *intf, pm_message_t message) 1416 { 1417 struct mceusb_dev *ir = usb_get_intfdata(intf); 1418 dev_info(ir->dev, "suspend\n"); 1419 usb_kill_urb(ir->urb_in); 1420 return 0; 1421 } 1422 1423 static int mceusb_dev_resume(struct usb_interface *intf) 1424 { 1425 struct mceusb_dev *ir = usb_get_intfdata(intf); 1426 dev_info(ir->dev, "resume\n"); 1427 if (usb_submit_urb(ir->urb_in, GFP_ATOMIC)) 1428 return -EIO; 1429 return 0; 1430 } 1431 1432 static struct usb_driver mceusb_dev_driver = { 1433 .name = DRIVER_NAME, 1434 .probe = mceusb_dev_probe, 1435 .disconnect = mceusb_dev_disconnect, 1436 .suspend = mceusb_dev_suspend, 1437 .resume = mceusb_dev_resume, 1438 .reset_resume = mceusb_dev_resume, 1439 .id_table = mceusb_dev_table 1440 }; 1441 1442 module_usb_driver(mceusb_dev_driver); 1443 1444 MODULE_DESCRIPTION(DRIVER_DESC); 1445 MODULE_AUTHOR(DRIVER_AUTHOR); 1446 MODULE_LICENSE("GPL"); 1447 MODULE_DEVICE_TABLE(usb, mceusb_dev_table); 1448 1449 module_param(debug, bool, S_IRUGO | S_IWUSR); 1450 MODULE_PARM_DESC(debug, "Debug enabled or not"); 1451