1 /* 2 * Driver for USB Windows Media Center Ed. eHome Infrared Transceivers 3 * 4 * Copyright (c) 2010-2011, Jarod Wilson <jarod@redhat.com> 5 * 6 * Based on the original lirc_mceusb and lirc_mceusb2 drivers, by Dan 7 * Conti, Martin Blatter and Daniel Melander, the latter of which was 8 * in turn also based on the lirc_atiusb driver by Paul Miller. The 9 * two mce drivers were merged into one by Jarod Wilson, with transmit 10 * support for the 1st-gen device added primarily by Patrick Calhoun, 11 * with a bit of tweaks by Jarod. Debugging improvements and proper 12 * support for what appears to be 3rd-gen hardware added by Jarod. 13 * Initial port from lirc driver to ir-core drivery by Jarod, based 14 * partially on a port to an earlier proposed IR infrastructure by 15 * Jon Smirl, which included enhancements and simplifications to the 16 * incoming IR buffer parsing routines. 17 * 18 * Updated in July of 2011 with the aid of Microsoft's official 19 * remote/transceiver requirements and specification document, found at 20 * download.microsoft.com, title 21 * Windows-Media-Center-RC-IR-Collection-Green-Button-Specification-03-08-2011-V2.pdf 22 * 23 * 24 * This program is free software; you can redistribute it and/or modify 25 * it under the terms of the GNU General Public License as published by 26 * the Free Software Foundation; either version 2 of the License, or 27 * (at your option) any later version. 28 * 29 * This program is distributed in the hope that it will be useful, 30 * but WITHOUT ANY WARRANTY; without even the implied warranty of 31 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 32 * GNU General Public License for more details. 33 * 34 * You should have received a copy of the GNU General Public License 35 * along with this program; if not, write to the Free Software 36 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 37 * 38 */ 39 40 #include <linux/device.h> 41 #include <linux/module.h> 42 #include <linux/slab.h> 43 #include <linux/usb.h> 44 #include <linux/usb/input.h> 45 #include <linux/pm_wakeup.h> 46 #include <media/rc-core.h> 47 48 #define DRIVER_VERSION "1.92" 49 #define DRIVER_AUTHOR "Jarod Wilson <jarod@redhat.com>" 50 #define DRIVER_DESC "Windows Media Center Ed. eHome Infrared Transceiver " \ 51 "device driver" 52 #define DRIVER_NAME "mceusb" 53 54 #define USB_BUFLEN 32 /* USB reception buffer length */ 55 #define USB_CTRL_MSG_SZ 2 /* Size of usb ctrl msg on gen1 hw */ 56 #define MCE_G1_INIT_MSGS 40 /* Init messages on gen1 hw to throw out */ 57 58 /* MCE constants */ 59 #define MCE_CMDBUF_SIZE 384 /* MCE Command buffer length */ 60 #define MCE_TIME_UNIT 50 /* Approx 50us resolution */ 61 #define MCE_CODE_LENGTH 5 /* Normal length of packet (with header) */ 62 #define MCE_PACKET_SIZE 4 /* Normal length of packet (without header) */ 63 #define MCE_IRDATA_HEADER 0x84 /* Actual header format is 0x80 + num_bytes */ 64 #define MCE_IRDATA_TRAILER 0x80 /* End of IR data */ 65 #define MCE_MAX_CHANNELS 2 /* Two transmitters, hardware dependent? */ 66 #define MCE_DEFAULT_TX_MASK 0x03 /* Vals: TX1=0x01, TX2=0x02, ALL=0x03 */ 67 #define MCE_PULSE_BIT 0x80 /* Pulse bit, MSB set == PULSE else SPACE */ 68 #define MCE_PULSE_MASK 0x7f /* Pulse mask */ 69 #define MCE_MAX_PULSE_LENGTH 0x7f /* Longest transmittable pulse symbol */ 70 71 /* 72 * The interface between the host and the IR hardware is command-response 73 * based. All commands and responses have a consistent format, where a lead 74 * byte always identifies the type of data following it. The lead byte has 75 * a port value in the 3 highest bits and a length value in the 5 lowest 76 * bits. 77 * 78 * The length field is overloaded, with a value of 11111 indicating that the 79 * following byte is a command or response code, and the length of the entire 80 * message is determined by the code. If the length field is not 11111, then 81 * it specifies the number of bytes of port data that follow. 82 */ 83 #define MCE_CMD 0x1f 84 #define MCE_PORT_IR 0x4 /* (0x4 << 5) | MCE_CMD = 0x9f */ 85 #define MCE_PORT_SYS 0x7 /* (0x7 << 5) | MCE_CMD = 0xff */ 86 #define MCE_PORT_SER 0x6 /* 0xc0 thru 0xdf flush & 0x1f bytes */ 87 #define MCE_PORT_MASK 0xe0 /* Mask out command bits */ 88 89 /* Command port headers */ 90 #define MCE_CMD_PORT_IR 0x9f /* IR-related cmd/rsp */ 91 #define MCE_CMD_PORT_SYS 0xff /* System (non-IR) device cmd/rsp */ 92 93 /* Commands that set device state (2-4 bytes in length) */ 94 #define MCE_CMD_RESET 0xfe /* Reset device, 2 bytes */ 95 #define MCE_CMD_RESUME 0xaa /* Resume device after error, 2 bytes */ 96 #define MCE_CMD_SETIRCFS 0x06 /* Set tx carrier, 4 bytes */ 97 #define MCE_CMD_SETIRTIMEOUT 0x0c /* Set timeout, 4 bytes */ 98 #define MCE_CMD_SETIRTXPORTS 0x08 /* Set tx ports, 3 bytes */ 99 #define MCE_CMD_SETIRRXPORTEN 0x14 /* Set rx ports, 3 bytes */ 100 #define MCE_CMD_FLASHLED 0x23 /* Flash receiver LED, 2 bytes */ 101 102 /* Commands that query device state (all 2 bytes, unless noted) */ 103 #define MCE_CMD_GETIRCFS 0x07 /* Get carrier */ 104 #define MCE_CMD_GETIRTIMEOUT 0x0d /* Get timeout */ 105 #define MCE_CMD_GETIRTXPORTS 0x13 /* Get tx ports */ 106 #define MCE_CMD_GETIRRXPORTEN 0x15 /* Get rx ports */ 107 #define MCE_CMD_GETPORTSTATUS 0x11 /* Get tx port status, 3 bytes */ 108 #define MCE_CMD_GETIRNUMPORTS 0x16 /* Get number of ports */ 109 #define MCE_CMD_GETWAKESOURCE 0x17 /* Get wake source */ 110 #define MCE_CMD_GETEMVER 0x22 /* Get emulator interface version */ 111 #define MCE_CMD_GETDEVDETAILS 0x21 /* Get device details (em ver2 only) */ 112 #define MCE_CMD_GETWAKESUPPORT 0x20 /* Get wake details (em ver2 only) */ 113 #define MCE_CMD_GETWAKEVERSION 0x18 /* Get wake pattern (em ver2 only) */ 114 115 /* Misc commands */ 116 #define MCE_CMD_NOP 0xff /* No operation */ 117 118 /* Responses to commands (non-error cases) */ 119 #define MCE_RSP_EQIRCFS 0x06 /* tx carrier, 4 bytes */ 120 #define MCE_RSP_EQIRTIMEOUT 0x0c /* rx timeout, 4 bytes */ 121 #define MCE_RSP_GETWAKESOURCE 0x17 /* wake source, 3 bytes */ 122 #define MCE_RSP_EQIRTXPORTS 0x08 /* tx port mask, 3 bytes */ 123 #define MCE_RSP_EQIRRXPORTEN 0x14 /* rx port mask, 3 bytes */ 124 #define MCE_RSP_GETPORTSTATUS 0x11 /* tx port status, 7 bytes */ 125 #define MCE_RSP_EQIRRXCFCNT 0x15 /* rx carrier count, 4 bytes */ 126 #define MCE_RSP_EQIRNUMPORTS 0x16 /* number of ports, 4 bytes */ 127 #define MCE_RSP_EQWAKESUPPORT 0x20 /* wake capabilities, 3 bytes */ 128 #define MCE_RSP_EQWAKEVERSION 0x18 /* wake pattern details, 6 bytes */ 129 #define MCE_RSP_EQDEVDETAILS 0x21 /* device capabilities, 3 bytes */ 130 #define MCE_RSP_EQEMVER 0x22 /* emulator interface ver, 3 bytes */ 131 #define MCE_RSP_FLASHLED 0x23 /* success flashing LED, 2 bytes */ 132 133 /* Responses to error cases, must send MCE_CMD_RESUME to clear them */ 134 #define MCE_RSP_CMD_ILLEGAL 0xfe /* illegal command for port, 2 bytes */ 135 #define MCE_RSP_TX_TIMEOUT 0x81 /* tx timed out, 2 bytes */ 136 137 /* Misc commands/responses not defined in the MCE remote/transceiver spec */ 138 #define MCE_CMD_SIG_END 0x01 /* End of signal */ 139 #define MCE_CMD_PING 0x03 /* Ping device */ 140 #define MCE_CMD_UNKNOWN 0x04 /* Unknown */ 141 #define MCE_CMD_UNKNOWN2 0x05 /* Unknown */ 142 #define MCE_CMD_UNKNOWN3 0x09 /* Unknown */ 143 #define MCE_CMD_UNKNOWN4 0x0a /* Unknown */ 144 #define MCE_CMD_G_REVISION 0x0b /* Get hw/sw revision */ 145 #define MCE_CMD_UNKNOWN5 0x0e /* Unknown */ 146 #define MCE_CMD_UNKNOWN6 0x0f /* Unknown */ 147 #define MCE_CMD_UNKNOWN8 0x19 /* Unknown */ 148 #define MCE_CMD_UNKNOWN9 0x1b /* Unknown */ 149 #define MCE_CMD_NULL 0x00 /* These show up various places... */ 150 151 /* if buf[i] & MCE_PORT_MASK == 0x80 and buf[i] != MCE_CMD_PORT_IR, 152 * then we're looking at a raw IR data sample */ 153 #define MCE_COMMAND_IRDATA 0x80 154 #define MCE_PACKET_LENGTH_MASK 0x1f /* Packet length mask */ 155 156 /* general constants */ 157 #define SEND_FLAG_IN_PROGRESS 1 158 #define SEND_FLAG_COMPLETE 2 159 #define RECV_FLAG_IN_PROGRESS 3 160 #define RECV_FLAG_COMPLETE 4 161 162 #define MCEUSB_RX 1 163 #define MCEUSB_TX 2 164 165 #define VENDOR_PHILIPS 0x0471 166 #define VENDOR_SMK 0x0609 167 #define VENDOR_TATUNG 0x1460 168 #define VENDOR_GATEWAY 0x107b 169 #define VENDOR_SHUTTLE 0x1308 170 #define VENDOR_SHUTTLE2 0x051c 171 #define VENDOR_MITSUMI 0x03ee 172 #define VENDOR_TOPSEED 0x1784 173 #define VENDOR_RICAVISION 0x179d 174 #define VENDOR_ITRON 0x195d 175 #define VENDOR_FIC 0x1509 176 #define VENDOR_LG 0x043e 177 #define VENDOR_MICROSOFT 0x045e 178 #define VENDOR_FORMOSA 0x147a 179 #define VENDOR_FINTEK 0x1934 180 #define VENDOR_PINNACLE 0x2304 181 #define VENDOR_ECS 0x1019 182 #define VENDOR_WISTRON 0x0fb8 183 #define VENDOR_COMPRO 0x185b 184 #define VENDOR_NORTHSTAR 0x04eb 185 #define VENDOR_REALTEK 0x0bda 186 #define VENDOR_TIVO 0x105a 187 #define VENDOR_CONEXANT 0x0572 188 #define VENDOR_TWISTEDMELON 0x2596 189 #define VENDOR_HAUPPAUGE 0x2040 190 #define VENDOR_PCTV 0x2013 191 #define VENDOR_ADAPTEC 0x03f3 192 193 enum mceusb_model_type { 194 MCE_GEN2 = 0, /* Most boards */ 195 MCE_GEN1, 196 MCE_GEN3, 197 MCE_GEN2_TX_INV, 198 POLARIS_EVK, 199 CX_HYBRID_TV, 200 MULTIFUNCTION, 201 TIVO_KIT, 202 MCE_GEN2_NO_TX, 203 HAUPPAUGE_CX_HYBRID_TV, 204 }; 205 206 struct mceusb_model { 207 u32 mce_gen1:1; 208 u32 mce_gen2:1; 209 u32 mce_gen3:1; 210 u32 tx_mask_normal:1; 211 u32 no_tx:1; 212 213 int ir_intfnum; 214 215 const char *rc_map; /* Allow specify a per-board map */ 216 const char *name; /* per-board name */ 217 }; 218 219 static const struct mceusb_model mceusb_model[] = { 220 [MCE_GEN1] = { 221 .mce_gen1 = 1, 222 .tx_mask_normal = 1, 223 }, 224 [MCE_GEN2] = { 225 .mce_gen2 = 1, 226 }, 227 [MCE_GEN2_NO_TX] = { 228 .mce_gen2 = 1, 229 .no_tx = 1, 230 }, 231 [MCE_GEN2_TX_INV] = { 232 .mce_gen2 = 1, 233 .tx_mask_normal = 1, 234 }, 235 [MCE_GEN3] = { 236 .mce_gen3 = 1, 237 .tx_mask_normal = 1, 238 }, 239 [POLARIS_EVK] = { 240 /* 241 * In fact, the EVK is shipped without 242 * remotes, but we should have something handy, 243 * to allow testing it 244 */ 245 .name = "Conexant Hybrid TV (cx231xx) MCE IR", 246 }, 247 [CX_HYBRID_TV] = { 248 .no_tx = 1, /* tx isn't wired up at all */ 249 .name = "Conexant Hybrid TV (cx231xx) MCE IR", 250 }, 251 [HAUPPAUGE_CX_HYBRID_TV] = { 252 .no_tx = 1, /* eeprom says it has no tx */ 253 .name = "Conexant Hybrid TV (cx231xx) MCE IR no TX", 254 }, 255 [MULTIFUNCTION] = { 256 .mce_gen2 = 1, 257 .ir_intfnum = 2, 258 }, 259 [TIVO_KIT] = { 260 .mce_gen2 = 1, 261 .rc_map = RC_MAP_TIVO, 262 }, 263 }; 264 265 static struct usb_device_id mceusb_dev_table[] = { 266 /* Original Microsoft MCE IR Transceiver (often HP-branded) */ 267 { USB_DEVICE(VENDOR_MICROSOFT, 0x006d), 268 .driver_info = MCE_GEN1 }, 269 /* Philips Infrared Transceiver - Sahara branded */ 270 { USB_DEVICE(VENDOR_PHILIPS, 0x0608) }, 271 /* Philips Infrared Transceiver - HP branded */ 272 { USB_DEVICE(VENDOR_PHILIPS, 0x060c), 273 .driver_info = MCE_GEN2_TX_INV }, 274 /* Philips SRM5100 */ 275 { USB_DEVICE(VENDOR_PHILIPS, 0x060d) }, 276 /* Philips Infrared Transceiver - Omaura */ 277 { USB_DEVICE(VENDOR_PHILIPS, 0x060f) }, 278 /* Philips Infrared Transceiver - Spinel plus */ 279 { USB_DEVICE(VENDOR_PHILIPS, 0x0613) }, 280 /* Philips eHome Infrared Transceiver */ 281 { USB_DEVICE(VENDOR_PHILIPS, 0x0815) }, 282 /* Philips/Spinel plus IR transceiver for ASUS */ 283 { USB_DEVICE(VENDOR_PHILIPS, 0x206c) }, 284 /* Philips/Spinel plus IR transceiver for ASUS */ 285 { USB_DEVICE(VENDOR_PHILIPS, 0x2088) }, 286 /* Philips IR transceiver (Dell branded) */ 287 { USB_DEVICE(VENDOR_PHILIPS, 0x2093), 288 .driver_info = MCE_GEN2_TX_INV }, 289 /* Realtek MCE IR Receiver and card reader */ 290 { USB_DEVICE(VENDOR_REALTEK, 0x0161), 291 .driver_info = MULTIFUNCTION }, 292 /* SMK/Toshiba G83C0004D410 */ 293 { USB_DEVICE(VENDOR_SMK, 0x031d), 294 .driver_info = MCE_GEN2_TX_INV }, 295 /* SMK eHome Infrared Transceiver (Sony VAIO) */ 296 { USB_DEVICE(VENDOR_SMK, 0x0322), 297 .driver_info = MCE_GEN2_TX_INV }, 298 /* bundled with Hauppauge PVR-150 */ 299 { USB_DEVICE(VENDOR_SMK, 0x0334), 300 .driver_info = MCE_GEN2_TX_INV }, 301 /* SMK eHome Infrared Transceiver */ 302 { USB_DEVICE(VENDOR_SMK, 0x0338) }, 303 /* SMK/I-O Data GV-MC7/RCKIT Receiver */ 304 { USB_DEVICE(VENDOR_SMK, 0x0353), 305 .driver_info = MCE_GEN2_NO_TX }, 306 /* SMK RXX6000 Infrared Receiver */ 307 { USB_DEVICE(VENDOR_SMK, 0x0357), 308 .driver_info = MCE_GEN2_NO_TX }, 309 /* Tatung eHome Infrared Transceiver */ 310 { USB_DEVICE(VENDOR_TATUNG, 0x9150) }, 311 /* Shuttle eHome Infrared Transceiver */ 312 { USB_DEVICE(VENDOR_SHUTTLE, 0xc001) }, 313 /* Shuttle eHome Infrared Transceiver */ 314 { USB_DEVICE(VENDOR_SHUTTLE2, 0xc001) }, 315 /* Gateway eHome Infrared Transceiver */ 316 { USB_DEVICE(VENDOR_GATEWAY, 0x3009) }, 317 /* Mitsumi */ 318 { USB_DEVICE(VENDOR_MITSUMI, 0x2501) }, 319 /* Topseed eHome Infrared Transceiver */ 320 { USB_DEVICE(VENDOR_TOPSEED, 0x0001), 321 .driver_info = MCE_GEN2_TX_INV }, 322 /* Topseed HP eHome Infrared Transceiver */ 323 { USB_DEVICE(VENDOR_TOPSEED, 0x0006), 324 .driver_info = MCE_GEN2_TX_INV }, 325 /* Topseed eHome Infrared Transceiver */ 326 { USB_DEVICE(VENDOR_TOPSEED, 0x0007), 327 .driver_info = MCE_GEN2_TX_INV }, 328 /* Topseed eHome Infrared Transceiver */ 329 { USB_DEVICE(VENDOR_TOPSEED, 0x0008), 330 .driver_info = MCE_GEN3 }, 331 /* Topseed eHome Infrared Transceiver */ 332 { USB_DEVICE(VENDOR_TOPSEED, 0x000a), 333 .driver_info = MCE_GEN2_TX_INV }, 334 /* Topseed eHome Infrared Transceiver */ 335 { USB_DEVICE(VENDOR_TOPSEED, 0x0011), 336 .driver_info = MCE_GEN3 }, 337 /* Ricavision internal Infrared Transceiver */ 338 { USB_DEVICE(VENDOR_RICAVISION, 0x0010) }, 339 /* Itron ione Libra Q-11 */ 340 { USB_DEVICE(VENDOR_ITRON, 0x7002) }, 341 /* FIC eHome Infrared Transceiver */ 342 { USB_DEVICE(VENDOR_FIC, 0x9242) }, 343 /* LG eHome Infrared Transceiver */ 344 { USB_DEVICE(VENDOR_LG, 0x9803) }, 345 /* Microsoft MCE Infrared Transceiver */ 346 { USB_DEVICE(VENDOR_MICROSOFT, 0x00a0) }, 347 /* Formosa eHome Infrared Transceiver */ 348 { USB_DEVICE(VENDOR_FORMOSA, 0xe015) }, 349 /* Formosa21 / eHome Infrared Receiver */ 350 { USB_DEVICE(VENDOR_FORMOSA, 0xe016) }, 351 /* Formosa aim / Trust MCE Infrared Receiver */ 352 { USB_DEVICE(VENDOR_FORMOSA, 0xe017), 353 .driver_info = MCE_GEN2_NO_TX }, 354 /* Formosa Industrial Computing / Beanbag Emulation Device */ 355 { USB_DEVICE(VENDOR_FORMOSA, 0xe018) }, 356 /* Formosa21 / eHome Infrared Receiver */ 357 { USB_DEVICE(VENDOR_FORMOSA, 0xe03a) }, 358 /* Formosa Industrial Computing AIM IR605/A */ 359 { USB_DEVICE(VENDOR_FORMOSA, 0xe03c) }, 360 /* Formosa Industrial Computing */ 361 { USB_DEVICE(VENDOR_FORMOSA, 0xe03e) }, 362 /* Formosa Industrial Computing */ 363 { USB_DEVICE(VENDOR_FORMOSA, 0xe042) }, 364 /* Fintek eHome Infrared Transceiver (HP branded) */ 365 { USB_DEVICE(VENDOR_FINTEK, 0x5168), 366 .driver_info = MCE_GEN2_TX_INV }, 367 /* Fintek eHome Infrared Transceiver */ 368 { USB_DEVICE(VENDOR_FINTEK, 0x0602) }, 369 /* Fintek eHome Infrared Transceiver (in the AOpen MP45) */ 370 { USB_DEVICE(VENDOR_FINTEK, 0x0702) }, 371 /* Pinnacle Remote Kit */ 372 { USB_DEVICE(VENDOR_PINNACLE, 0x0225), 373 .driver_info = MCE_GEN3 }, 374 /* Elitegroup Computer Systems IR */ 375 { USB_DEVICE(VENDOR_ECS, 0x0f38) }, 376 /* Wistron Corp. eHome Infrared Receiver */ 377 { USB_DEVICE(VENDOR_WISTRON, 0x0002) }, 378 /* Compro K100 */ 379 { USB_DEVICE(VENDOR_COMPRO, 0x3020) }, 380 /* Compro K100 v2 */ 381 { USB_DEVICE(VENDOR_COMPRO, 0x3082) }, 382 /* Northstar Systems, Inc. eHome Infrared Transceiver */ 383 { USB_DEVICE(VENDOR_NORTHSTAR, 0xe004) }, 384 /* TiVo PC IR Receiver */ 385 { USB_DEVICE(VENDOR_TIVO, 0x2000), 386 .driver_info = TIVO_KIT }, 387 /* Conexant Hybrid TV "Shelby" Polaris SDK */ 388 { USB_DEVICE(VENDOR_CONEXANT, 0x58a1), 389 .driver_info = POLARIS_EVK }, 390 /* Conexant Hybrid TV RDU253S Polaris */ 391 { USB_DEVICE(VENDOR_CONEXANT, 0x58a5), 392 .driver_info = CX_HYBRID_TV }, 393 /* Twisted Melon Inc. - Manta Mini Receiver */ 394 { USB_DEVICE(VENDOR_TWISTEDMELON, 0x8008) }, 395 /* Twisted Melon Inc. - Manta Pico Receiver */ 396 { USB_DEVICE(VENDOR_TWISTEDMELON, 0x8016) }, 397 /* Twisted Melon Inc. - Manta Transceiver */ 398 { USB_DEVICE(VENDOR_TWISTEDMELON, 0x8042) }, 399 /* Hauppauge WINTV-HVR-HVR 930C-HD - based on cx231xx */ 400 { USB_DEVICE(VENDOR_HAUPPAUGE, 0xb130), 401 .driver_info = HAUPPAUGE_CX_HYBRID_TV }, 402 { USB_DEVICE(VENDOR_HAUPPAUGE, 0xb131), 403 .driver_info = HAUPPAUGE_CX_HYBRID_TV }, 404 { USB_DEVICE(VENDOR_HAUPPAUGE, 0xb138), 405 .driver_info = HAUPPAUGE_CX_HYBRID_TV }, 406 { USB_DEVICE(VENDOR_HAUPPAUGE, 0xb139), 407 .driver_info = HAUPPAUGE_CX_HYBRID_TV }, 408 { USB_DEVICE(VENDOR_PCTV, 0x0259), 409 .driver_info = HAUPPAUGE_CX_HYBRID_TV }, 410 { USB_DEVICE(VENDOR_PCTV, 0x025e), 411 .driver_info = HAUPPAUGE_CX_HYBRID_TV }, 412 /* Adaptec / HP eHome Receiver */ 413 { USB_DEVICE(VENDOR_ADAPTEC, 0x0094) }, 414 415 /* Terminating entry */ 416 { } 417 }; 418 419 /* data structure for each usb transceiver */ 420 struct mceusb_dev { 421 /* ir-core bits */ 422 struct rc_dev *rc; 423 424 /* optional features we can enable */ 425 bool carrier_report_enabled; 426 bool learning_enabled; 427 428 /* core device bits */ 429 struct device *dev; 430 431 /* usb */ 432 struct usb_device *usbdev; 433 struct urb *urb_in; 434 struct usb_endpoint_descriptor *usb_ep_out; 435 436 /* buffers and dma */ 437 unsigned char *buf_in; 438 unsigned int len_in; 439 dma_addr_t dma_in; 440 441 enum { 442 CMD_HEADER = 0, 443 SUBCMD, 444 CMD_DATA, 445 PARSE_IRDATA, 446 } parser_state; 447 448 u8 cmd, rem; /* Remaining IR data bytes in packet */ 449 450 struct { 451 u32 connected:1; 452 u32 tx_mask_normal:1; 453 u32 microsoft_gen1:1; 454 u32 no_tx:1; 455 } flags; 456 457 /* transmit support */ 458 int send_flags; 459 u32 carrier; 460 unsigned char tx_mask; 461 462 char name[128]; 463 char phys[64]; 464 enum mceusb_model_type model; 465 466 bool need_reset; /* flag to issue a device resume cmd */ 467 u8 emver; /* emulator interface version */ 468 u8 num_txports; /* number of transmit ports */ 469 u8 num_rxports; /* number of receive sensors */ 470 u8 txports_cabled; /* bitmask of transmitters with cable */ 471 u8 rxports_active; /* bitmask of active receive sensors */ 472 }; 473 474 /* MCE Device Command Strings, generally a port and command pair */ 475 static char DEVICE_RESUME[] = {MCE_CMD_NULL, MCE_CMD_PORT_SYS, 476 MCE_CMD_RESUME}; 477 static char GET_REVISION[] = {MCE_CMD_PORT_SYS, MCE_CMD_G_REVISION}; 478 static char GET_EMVER[] = {MCE_CMD_PORT_SYS, MCE_CMD_GETEMVER}; 479 static char GET_WAKEVERSION[] = {MCE_CMD_PORT_SYS, MCE_CMD_GETWAKEVERSION}; 480 static char FLASH_LED[] = {MCE_CMD_PORT_SYS, MCE_CMD_FLASHLED}; 481 static char GET_UNKNOWN2[] = {MCE_CMD_PORT_IR, MCE_CMD_UNKNOWN2}; 482 static char GET_CARRIER_FREQ[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRCFS}; 483 static char GET_RX_TIMEOUT[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRTIMEOUT}; 484 static char GET_NUM_PORTS[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRNUMPORTS}; 485 static char GET_TX_BITMASK[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRTXPORTS}; 486 static char GET_RX_SENSOR[] = {MCE_CMD_PORT_IR, MCE_CMD_GETIRRXPORTEN}; 487 /* sub in desired values in lower byte or bytes for full command */ 488 /* FIXME: make use of these for transmit. 489 static char SET_CARRIER_FREQ[] = {MCE_CMD_PORT_IR, 490 MCE_CMD_SETIRCFS, 0x00, 0x00}; 491 static char SET_TX_BITMASK[] = {MCE_CMD_PORT_IR, MCE_CMD_SETIRTXPORTS, 0x00}; 492 static char SET_RX_TIMEOUT[] = {MCE_CMD_PORT_IR, 493 MCE_CMD_SETIRTIMEOUT, 0x00, 0x00}; 494 static char SET_RX_SENSOR[] = {MCE_CMD_PORT_IR, 495 MCE_RSP_EQIRRXPORTEN, 0x00}; 496 */ 497 498 static int mceusb_cmd_datasize(u8 cmd, u8 subcmd) 499 { 500 int datasize = 0; 501 502 switch (cmd) { 503 case MCE_CMD_NULL: 504 if (subcmd == MCE_CMD_PORT_SYS) 505 datasize = 1; 506 break; 507 case MCE_CMD_PORT_SYS: 508 switch (subcmd) { 509 case MCE_RSP_GETPORTSTATUS: 510 datasize = 5; 511 break; 512 case MCE_RSP_EQWAKEVERSION: 513 datasize = 4; 514 break; 515 case MCE_CMD_G_REVISION: 516 datasize = 2; 517 break; 518 case MCE_RSP_EQWAKESUPPORT: 519 case MCE_RSP_GETWAKESOURCE: 520 case MCE_RSP_EQDEVDETAILS: 521 case MCE_RSP_EQEMVER: 522 datasize = 1; 523 break; 524 } 525 case MCE_CMD_PORT_IR: 526 switch (subcmd) { 527 case MCE_CMD_UNKNOWN: 528 case MCE_RSP_EQIRCFS: 529 case MCE_RSP_EQIRTIMEOUT: 530 case MCE_RSP_EQIRRXCFCNT: 531 case MCE_RSP_EQIRNUMPORTS: 532 datasize = 2; 533 break; 534 case MCE_CMD_SIG_END: 535 case MCE_RSP_EQIRTXPORTS: 536 case MCE_RSP_EQIRRXPORTEN: 537 datasize = 1; 538 break; 539 } 540 } 541 return datasize; 542 } 543 544 static void mceusb_dev_printdata(struct mceusb_dev *ir, char *buf, 545 int offset, int len, bool out) 546 { 547 #if defined(DEBUG) || defined(CONFIG_DYNAMIC_DEBUG) 548 char *inout; 549 u8 cmd, subcmd, data1, data2, data3, data4; 550 struct device *dev = ir->dev; 551 int start, skip = 0; 552 u32 carrier, period; 553 554 /* skip meaningless 0xb1 0x60 header bytes on orig receiver */ 555 if (ir->flags.microsoft_gen1 && !out && !offset) 556 skip = 2; 557 558 if (len <= skip) 559 return; 560 561 dev_dbg(dev, "%cx data: %*ph (length=%d)", 562 (out ? 't' : 'r'), min(len, USB_BUFLEN), buf, len); 563 564 inout = out ? "Request" : "Got"; 565 566 start = offset + skip; 567 cmd = buf[start] & 0xff; 568 subcmd = buf[start + 1] & 0xff; 569 data1 = buf[start + 2] & 0xff; 570 data2 = buf[start + 3] & 0xff; 571 data3 = buf[start + 4] & 0xff; 572 data4 = buf[start + 5] & 0xff; 573 574 switch (cmd) { 575 case MCE_CMD_NULL: 576 if (subcmd == MCE_CMD_NULL) 577 break; 578 if ((subcmd == MCE_CMD_PORT_SYS) && 579 (data1 == MCE_CMD_RESUME)) 580 dev_dbg(dev, "Device resume requested"); 581 else 582 dev_dbg(dev, "Unknown command 0x%02x 0x%02x", 583 cmd, subcmd); 584 break; 585 case MCE_CMD_PORT_SYS: 586 switch (subcmd) { 587 case MCE_RSP_EQEMVER: 588 if (!out) 589 dev_dbg(dev, "Emulator interface version %x", 590 data1); 591 break; 592 case MCE_CMD_G_REVISION: 593 if (len == 2) 594 dev_dbg(dev, "Get hw/sw rev?"); 595 else 596 dev_dbg(dev, "hw/sw rev %*ph", 597 4, &buf[start + 2]); 598 break; 599 case MCE_CMD_RESUME: 600 dev_dbg(dev, "Device resume requested"); 601 break; 602 case MCE_RSP_CMD_ILLEGAL: 603 dev_dbg(dev, "Illegal PORT_SYS command"); 604 break; 605 case MCE_RSP_EQWAKEVERSION: 606 if (!out) 607 dev_dbg(dev, "Wake version, proto: 0x%02x, " 608 "payload: 0x%02x, address: 0x%02x, " 609 "version: 0x%02x", 610 data1, data2, data3, data4); 611 break; 612 case MCE_RSP_GETPORTSTATUS: 613 if (!out) 614 /* We use data1 + 1 here, to match hw labels */ 615 dev_dbg(dev, "TX port %d: blaster is%s connected", 616 data1 + 1, data4 ? " not" : ""); 617 break; 618 case MCE_CMD_FLASHLED: 619 dev_dbg(dev, "Attempting to flash LED"); 620 break; 621 default: 622 dev_dbg(dev, "Unknown command 0x%02x 0x%02x", 623 cmd, subcmd); 624 break; 625 } 626 break; 627 case MCE_CMD_PORT_IR: 628 switch (subcmd) { 629 case MCE_CMD_SIG_END: 630 dev_dbg(dev, "End of signal"); 631 break; 632 case MCE_CMD_PING: 633 dev_dbg(dev, "Ping"); 634 break; 635 case MCE_CMD_UNKNOWN: 636 dev_dbg(dev, "Resp to 9f 05 of 0x%02x 0x%02x", 637 data1, data2); 638 break; 639 case MCE_RSP_EQIRCFS: 640 period = DIV_ROUND_CLOSEST( 641 (1U << data1 * 2) * (data2 + 1), 10); 642 if (!period) 643 break; 644 carrier = (1000 * 1000) / period; 645 dev_dbg(dev, "%s carrier of %u Hz (period %uus)", 646 inout, carrier, period); 647 break; 648 case MCE_CMD_GETIRCFS: 649 dev_dbg(dev, "Get carrier mode and freq"); 650 break; 651 case MCE_RSP_EQIRTXPORTS: 652 dev_dbg(dev, "%s transmit blaster mask of 0x%02x", 653 inout, data1); 654 break; 655 case MCE_RSP_EQIRTIMEOUT: 656 /* value is in units of 50us, so x*50/1000 ms */ 657 period = ((data1 << 8) | data2) * MCE_TIME_UNIT / 1000; 658 dev_dbg(dev, "%s receive timeout of %d ms", 659 inout, period); 660 break; 661 case MCE_CMD_GETIRTIMEOUT: 662 dev_dbg(dev, "Get receive timeout"); 663 break; 664 case MCE_CMD_GETIRTXPORTS: 665 dev_dbg(dev, "Get transmit blaster mask"); 666 break; 667 case MCE_RSP_EQIRRXPORTEN: 668 dev_dbg(dev, "%s %s-range receive sensor in use", 669 inout, data1 == 0x02 ? "short" : "long"); 670 break; 671 case MCE_CMD_GETIRRXPORTEN: 672 /* aka MCE_RSP_EQIRRXCFCNT */ 673 if (out) 674 dev_dbg(dev, "Get receive sensor"); 675 else if (ir->learning_enabled) 676 dev_dbg(dev, "RX pulse count: %d", 677 ((data1 << 8) | data2)); 678 break; 679 case MCE_RSP_EQIRNUMPORTS: 680 if (out) 681 break; 682 dev_dbg(dev, "Num TX ports: %x, num RX ports: %x", 683 data1, data2); 684 break; 685 case MCE_RSP_CMD_ILLEGAL: 686 dev_dbg(dev, "Illegal PORT_IR command"); 687 break; 688 default: 689 dev_dbg(dev, "Unknown command 0x%02x 0x%02x", 690 cmd, subcmd); 691 break; 692 } 693 break; 694 default: 695 break; 696 } 697 698 if (cmd == MCE_IRDATA_TRAILER) 699 dev_dbg(dev, "End of raw IR data"); 700 else if ((cmd != MCE_CMD_PORT_IR) && 701 ((cmd & MCE_PORT_MASK) == MCE_COMMAND_IRDATA)) 702 dev_dbg(dev, "Raw IR data, %d pulse/space samples", ir->rem); 703 #endif 704 } 705 706 static void mce_async_callback(struct urb *urb) 707 { 708 struct mceusb_dev *ir; 709 int len; 710 711 if (!urb) 712 return; 713 714 ir = urb->context; 715 716 switch (urb->status) { 717 /* success */ 718 case 0: 719 len = urb->actual_length; 720 721 mceusb_dev_printdata(ir, urb->transfer_buffer, 0, len, true); 722 break; 723 724 case -ECONNRESET: 725 case -ENOENT: 726 case -EILSEQ: 727 case -ESHUTDOWN: 728 break; 729 730 case -EPIPE: 731 default: 732 dev_err(ir->dev, "Error: request urb status = %d", urb->status); 733 break; 734 } 735 736 /* the transfer buffer and urb were allocated in mce_request_packet */ 737 kfree(urb->transfer_buffer); 738 usb_free_urb(urb); 739 } 740 741 /* request incoming or send outgoing usb packet - used to initialize remote */ 742 static void mce_request_packet(struct mceusb_dev *ir, unsigned char *data, 743 int size, int urb_type) 744 { 745 int res, pipe; 746 struct urb *async_urb; 747 struct device *dev = ir->dev; 748 unsigned char *async_buf; 749 750 if (urb_type == MCEUSB_TX) { 751 async_urb = usb_alloc_urb(0, GFP_KERNEL); 752 if (unlikely(!async_urb)) { 753 dev_err(dev, "Error, couldn't allocate urb!\n"); 754 return; 755 } 756 757 async_buf = kzalloc(size, GFP_KERNEL); 758 if (!async_buf) { 759 dev_err(dev, "Error, couldn't allocate buf!\n"); 760 usb_free_urb(async_urb); 761 return; 762 } 763 764 /* outbound data */ 765 if (usb_endpoint_xfer_int(ir->usb_ep_out)) { 766 pipe = usb_sndintpipe(ir->usbdev, 767 ir->usb_ep_out->bEndpointAddress); 768 usb_fill_int_urb(async_urb, ir->usbdev, pipe, async_buf, 769 size, mce_async_callback, ir, 770 ir->usb_ep_out->bInterval); 771 } else { 772 pipe = usb_sndbulkpipe(ir->usbdev, 773 ir->usb_ep_out->bEndpointAddress); 774 usb_fill_bulk_urb(async_urb, ir->usbdev, pipe, 775 async_buf, size, mce_async_callback, 776 ir); 777 } 778 memcpy(async_buf, data, size); 779 780 } else if (urb_type == MCEUSB_RX) { 781 /* standard request */ 782 async_urb = ir->urb_in; 783 ir->send_flags = RECV_FLAG_IN_PROGRESS; 784 785 } else { 786 dev_err(dev, "Error! Unknown urb type %d\n", urb_type); 787 return; 788 } 789 790 dev_dbg(dev, "receive request called (size=%#x)", size); 791 792 async_urb->transfer_buffer_length = size; 793 async_urb->dev = ir->usbdev; 794 795 res = usb_submit_urb(async_urb, GFP_ATOMIC); 796 if (res) { 797 dev_err(dev, "receive request FAILED! (res=%d)", res); 798 return; 799 } 800 dev_dbg(dev, "receive request complete (res=%d)", res); 801 } 802 803 static void mce_async_out(struct mceusb_dev *ir, unsigned char *data, int size) 804 { 805 int rsize = sizeof(DEVICE_RESUME); 806 807 if (ir->need_reset) { 808 ir->need_reset = false; 809 mce_request_packet(ir, DEVICE_RESUME, rsize, MCEUSB_TX); 810 msleep(10); 811 } 812 813 mce_request_packet(ir, data, size, MCEUSB_TX); 814 msleep(10); 815 } 816 817 static void mce_flush_rx_buffer(struct mceusb_dev *ir, int size) 818 { 819 mce_request_packet(ir, NULL, size, MCEUSB_RX); 820 } 821 822 /* Send data out the IR blaster port(s) */ 823 static int mceusb_tx_ir(struct rc_dev *dev, unsigned *txbuf, unsigned count) 824 { 825 struct mceusb_dev *ir = dev->priv; 826 int i, length, ret = 0; 827 int cmdcount = 0; 828 unsigned char cmdbuf[MCE_CMDBUF_SIZE]; 829 830 /* MCE tx init header */ 831 cmdbuf[cmdcount++] = MCE_CMD_PORT_IR; 832 cmdbuf[cmdcount++] = MCE_CMD_SETIRTXPORTS; 833 cmdbuf[cmdcount++] = ir->tx_mask; 834 835 /* Send the set TX ports command */ 836 mce_async_out(ir, cmdbuf, cmdcount); 837 cmdcount = 0; 838 839 /* Generate mce packet data */ 840 for (i = 0; (i < count) && (cmdcount < MCE_CMDBUF_SIZE); i++) { 841 txbuf[i] = txbuf[i] / MCE_TIME_UNIT; 842 843 do { /* loop to support long pulses/spaces > 127*50us=6.35ms */ 844 845 /* Insert mce packet header every 4th entry */ 846 if ((cmdcount < MCE_CMDBUF_SIZE) && 847 (cmdcount % MCE_CODE_LENGTH) == 0) 848 cmdbuf[cmdcount++] = MCE_IRDATA_HEADER; 849 850 /* Insert mce packet data */ 851 if (cmdcount < MCE_CMDBUF_SIZE) 852 cmdbuf[cmdcount++] = 853 (txbuf[i] < MCE_PULSE_BIT ? 854 txbuf[i] : MCE_MAX_PULSE_LENGTH) | 855 (i & 1 ? 0x00 : MCE_PULSE_BIT); 856 else { 857 ret = -EINVAL; 858 goto out; 859 } 860 861 } while ((txbuf[i] > MCE_MAX_PULSE_LENGTH) && 862 (txbuf[i] -= MCE_MAX_PULSE_LENGTH)); 863 } 864 865 /* Check if we have room for the empty packet at the end */ 866 if (cmdcount >= MCE_CMDBUF_SIZE) { 867 ret = -EINVAL; 868 goto out; 869 } 870 871 /* Fix packet length in last header */ 872 length = cmdcount % MCE_CODE_LENGTH; 873 cmdbuf[cmdcount - length] -= MCE_CODE_LENGTH - length; 874 875 /* All mce commands end with an empty packet (0x80) */ 876 cmdbuf[cmdcount++] = MCE_IRDATA_TRAILER; 877 878 /* Transmit the command to the mce device */ 879 mce_async_out(ir, cmdbuf, cmdcount); 880 881 out: 882 return ret ? ret : count; 883 } 884 885 /* Sets active IR outputs -- mce devices typically have two */ 886 static int mceusb_set_tx_mask(struct rc_dev *dev, u32 mask) 887 { 888 struct mceusb_dev *ir = dev->priv; 889 890 /* return number of transmitters */ 891 int emitters = ir->num_txports ? ir->num_txports : 2; 892 893 if (mask >= (1 << emitters)) 894 return emitters; 895 896 if (ir->flags.tx_mask_normal) 897 ir->tx_mask = mask; 898 else 899 ir->tx_mask = (mask != MCE_DEFAULT_TX_MASK ? 900 mask ^ MCE_DEFAULT_TX_MASK : mask) << 1; 901 902 return 0; 903 } 904 905 /* Sets the send carrier frequency and mode */ 906 static int mceusb_set_tx_carrier(struct rc_dev *dev, u32 carrier) 907 { 908 struct mceusb_dev *ir = dev->priv; 909 int clk = 10000000; 910 int prescaler = 0, divisor = 0; 911 unsigned char cmdbuf[4] = { MCE_CMD_PORT_IR, 912 MCE_CMD_SETIRCFS, 0x00, 0x00 }; 913 914 /* Carrier has changed */ 915 if (ir->carrier != carrier) { 916 917 if (carrier == 0) { 918 ir->carrier = carrier; 919 cmdbuf[2] = MCE_CMD_SIG_END; 920 cmdbuf[3] = MCE_IRDATA_TRAILER; 921 dev_dbg(ir->dev, "disabling carrier modulation"); 922 mce_async_out(ir, cmdbuf, sizeof(cmdbuf)); 923 return carrier; 924 } 925 926 for (prescaler = 0; prescaler < 4; ++prescaler) { 927 divisor = (clk >> (2 * prescaler)) / carrier; 928 if (divisor <= 0xff) { 929 ir->carrier = carrier; 930 cmdbuf[2] = prescaler; 931 cmdbuf[3] = divisor; 932 dev_dbg(ir->dev, "requesting %u HZ carrier", 933 carrier); 934 935 /* Transmit new carrier to mce device */ 936 mce_async_out(ir, cmdbuf, sizeof(cmdbuf)); 937 return carrier; 938 } 939 } 940 941 return -EINVAL; 942 943 } 944 945 return 0; 946 } 947 948 /* 949 * We don't do anything but print debug spew for many of the command bits 950 * we receive from the hardware, but some of them are useful information 951 * we want to store so that we can use them. 952 */ 953 static void mceusb_handle_command(struct mceusb_dev *ir, int index) 954 { 955 u8 hi = ir->buf_in[index + 1] & 0xff; 956 u8 lo = ir->buf_in[index + 2] & 0xff; 957 958 switch (ir->buf_in[index]) { 959 /* the one and only 5-byte return value command */ 960 case MCE_RSP_GETPORTSTATUS: 961 if ((ir->buf_in[index + 4] & 0xff) == 0x00) 962 ir->txports_cabled |= 1 << hi; 963 break; 964 965 /* 2-byte return value commands */ 966 case MCE_RSP_EQIRTIMEOUT: 967 ir->rc->timeout = US_TO_NS((hi << 8 | lo) * MCE_TIME_UNIT); 968 break; 969 case MCE_RSP_EQIRNUMPORTS: 970 ir->num_txports = hi; 971 ir->num_rxports = lo; 972 break; 973 974 /* 1-byte return value commands */ 975 case MCE_RSP_EQEMVER: 976 ir->emver = hi; 977 break; 978 case MCE_RSP_EQIRTXPORTS: 979 ir->tx_mask = hi; 980 break; 981 case MCE_RSP_EQIRRXPORTEN: 982 ir->learning_enabled = ((hi & 0x02) == 0x02); 983 ir->rxports_active = hi; 984 break; 985 case MCE_RSP_CMD_ILLEGAL: 986 ir->need_reset = true; 987 break; 988 default: 989 break; 990 } 991 } 992 993 static void mceusb_process_ir_data(struct mceusb_dev *ir, int buf_len) 994 { 995 DEFINE_IR_RAW_EVENT(rawir); 996 bool event = false; 997 int i = 0; 998 999 /* skip meaningless 0xb1 0x60 header bytes on orig receiver */ 1000 if (ir->flags.microsoft_gen1) 1001 i = 2; 1002 1003 /* if there's no data, just return now */ 1004 if (buf_len <= i) 1005 return; 1006 1007 for (; i < buf_len; i++) { 1008 switch (ir->parser_state) { 1009 case SUBCMD: 1010 ir->rem = mceusb_cmd_datasize(ir->cmd, ir->buf_in[i]); 1011 mceusb_dev_printdata(ir, ir->buf_in, i - 1, 1012 ir->rem + 2, false); 1013 mceusb_handle_command(ir, i); 1014 ir->parser_state = CMD_DATA; 1015 break; 1016 case PARSE_IRDATA: 1017 ir->rem--; 1018 init_ir_raw_event(&rawir); 1019 rawir.pulse = ((ir->buf_in[i] & MCE_PULSE_BIT) != 0); 1020 rawir.duration = (ir->buf_in[i] & MCE_PULSE_MASK) 1021 * US_TO_NS(MCE_TIME_UNIT); 1022 1023 dev_dbg(ir->dev, "Storing %s with duration %d", 1024 rawir.pulse ? "pulse" : "space", 1025 rawir.duration); 1026 1027 if (ir_raw_event_store_with_filter(ir->rc, &rawir)) 1028 event = true; 1029 break; 1030 case CMD_DATA: 1031 ir->rem--; 1032 break; 1033 case CMD_HEADER: 1034 /* decode mce packets of the form (84),AA,BB,CC,DD */ 1035 /* IR data packets can span USB messages - rem */ 1036 ir->cmd = ir->buf_in[i]; 1037 if ((ir->cmd == MCE_CMD_PORT_IR) || 1038 ((ir->cmd & MCE_PORT_MASK) != 1039 MCE_COMMAND_IRDATA)) { 1040 ir->parser_state = SUBCMD; 1041 continue; 1042 } 1043 ir->rem = (ir->cmd & MCE_PACKET_LENGTH_MASK); 1044 mceusb_dev_printdata(ir, ir->buf_in, 1045 i, ir->rem + 1, false); 1046 if (ir->rem) 1047 ir->parser_state = PARSE_IRDATA; 1048 else 1049 ir_raw_event_reset(ir->rc); 1050 break; 1051 } 1052 1053 if (ir->parser_state != CMD_HEADER && !ir->rem) 1054 ir->parser_state = CMD_HEADER; 1055 } 1056 if (event) { 1057 dev_dbg(ir->dev, "processed IR data"); 1058 ir_raw_event_handle(ir->rc); 1059 } 1060 } 1061 1062 static void mceusb_dev_recv(struct urb *urb) 1063 { 1064 struct mceusb_dev *ir; 1065 int buf_len; 1066 1067 if (!urb) 1068 return; 1069 1070 ir = urb->context; 1071 if (!ir) { 1072 usb_unlink_urb(urb); 1073 return; 1074 } 1075 1076 buf_len = urb->actual_length; 1077 1078 if (ir->send_flags == RECV_FLAG_IN_PROGRESS) { 1079 ir->send_flags = SEND_FLAG_COMPLETE; 1080 dev_dbg(ir->dev, "setup answer received %d bytes\n", 1081 buf_len); 1082 } 1083 1084 switch (urb->status) { 1085 /* success */ 1086 case 0: 1087 mceusb_process_ir_data(ir, buf_len); 1088 break; 1089 1090 case -ECONNRESET: 1091 case -ENOENT: 1092 case -EILSEQ: 1093 case -ESHUTDOWN: 1094 usb_unlink_urb(urb); 1095 return; 1096 1097 case -EPIPE: 1098 default: 1099 dev_err(ir->dev, "Error: urb status = %d", urb->status); 1100 break; 1101 } 1102 1103 usb_submit_urb(urb, GFP_ATOMIC); 1104 } 1105 1106 static void mceusb_get_emulator_version(struct mceusb_dev *ir) 1107 { 1108 /* If we get no reply or an illegal command reply, its ver 1, says MS */ 1109 ir->emver = 1; 1110 mce_async_out(ir, GET_EMVER, sizeof(GET_EMVER)); 1111 } 1112 1113 static void mceusb_gen1_init(struct mceusb_dev *ir) 1114 { 1115 int ret; 1116 struct device *dev = ir->dev; 1117 char *data; 1118 1119 data = kzalloc(USB_CTRL_MSG_SZ, GFP_KERNEL); 1120 if (!data) { 1121 dev_err(dev, "%s: memory allocation failed!", __func__); 1122 return; 1123 } 1124 1125 /* 1126 * This is a strange one. Windows issues a set address to the device 1127 * on the receive control pipe and expect a certain value pair back 1128 */ 1129 ret = usb_control_msg(ir->usbdev, usb_rcvctrlpipe(ir->usbdev, 0), 1130 USB_REQ_SET_ADDRESS, USB_TYPE_VENDOR, 0, 0, 1131 data, USB_CTRL_MSG_SZ, HZ * 3); 1132 dev_dbg(dev, "set address - ret = %d", ret); 1133 dev_dbg(dev, "set address - data[0] = %d, data[1] = %d", 1134 data[0], data[1]); 1135 1136 /* set feature: bit rate 38400 bps */ 1137 ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), 1138 USB_REQ_SET_FEATURE, USB_TYPE_VENDOR, 1139 0xc04e, 0x0000, NULL, 0, HZ * 3); 1140 1141 dev_dbg(dev, "set feature - ret = %d", ret); 1142 1143 /* bRequest 4: set char length to 8 bits */ 1144 ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), 1145 4, USB_TYPE_VENDOR, 1146 0x0808, 0x0000, NULL, 0, HZ * 3); 1147 dev_dbg(dev, "set char length - retB = %d", ret); 1148 1149 /* bRequest 2: set handshaking to use DTR/DSR */ 1150 ret = usb_control_msg(ir->usbdev, usb_sndctrlpipe(ir->usbdev, 0), 1151 2, USB_TYPE_VENDOR, 1152 0x0000, 0x0100, NULL, 0, HZ * 3); 1153 dev_dbg(dev, "set handshake - retC = %d", ret); 1154 1155 /* device resume */ 1156 mce_async_out(ir, DEVICE_RESUME, sizeof(DEVICE_RESUME)); 1157 1158 /* get hw/sw revision? */ 1159 mce_async_out(ir, GET_REVISION, sizeof(GET_REVISION)); 1160 1161 kfree(data); 1162 } 1163 1164 static void mceusb_gen2_init(struct mceusb_dev *ir) 1165 { 1166 /* device resume */ 1167 mce_async_out(ir, DEVICE_RESUME, sizeof(DEVICE_RESUME)); 1168 1169 /* get wake version (protocol, key, address) */ 1170 mce_async_out(ir, GET_WAKEVERSION, sizeof(GET_WAKEVERSION)); 1171 1172 /* unknown what this one actually returns... */ 1173 mce_async_out(ir, GET_UNKNOWN2, sizeof(GET_UNKNOWN2)); 1174 } 1175 1176 static void mceusb_get_parameters(struct mceusb_dev *ir) 1177 { 1178 int i; 1179 unsigned char cmdbuf[3] = { MCE_CMD_PORT_SYS, 1180 MCE_CMD_GETPORTSTATUS, 0x00 }; 1181 1182 /* defaults, if the hardware doesn't support querying */ 1183 ir->num_txports = 2; 1184 ir->num_rxports = 2; 1185 1186 /* get number of tx and rx ports */ 1187 mce_async_out(ir, GET_NUM_PORTS, sizeof(GET_NUM_PORTS)); 1188 1189 /* get the carrier and frequency */ 1190 mce_async_out(ir, GET_CARRIER_FREQ, sizeof(GET_CARRIER_FREQ)); 1191 1192 if (ir->num_txports && !ir->flags.no_tx) 1193 /* get the transmitter bitmask */ 1194 mce_async_out(ir, GET_TX_BITMASK, sizeof(GET_TX_BITMASK)); 1195 1196 /* get receiver timeout value */ 1197 mce_async_out(ir, GET_RX_TIMEOUT, sizeof(GET_RX_TIMEOUT)); 1198 1199 /* get receiver sensor setting */ 1200 mce_async_out(ir, GET_RX_SENSOR, sizeof(GET_RX_SENSOR)); 1201 1202 for (i = 0; i < ir->num_txports; i++) { 1203 cmdbuf[2] = i; 1204 mce_async_out(ir, cmdbuf, sizeof(cmdbuf)); 1205 } 1206 } 1207 1208 static void mceusb_flash_led(struct mceusb_dev *ir) 1209 { 1210 if (ir->emver < 2) 1211 return; 1212 1213 mce_async_out(ir, FLASH_LED, sizeof(FLASH_LED)); 1214 } 1215 1216 static struct rc_dev *mceusb_init_rc_dev(struct mceusb_dev *ir) 1217 { 1218 struct usb_device *udev = ir->usbdev; 1219 struct device *dev = ir->dev; 1220 struct rc_dev *rc; 1221 int ret; 1222 1223 rc = rc_allocate_device(); 1224 if (!rc) { 1225 dev_err(dev, "remote dev allocation failed"); 1226 goto out; 1227 } 1228 1229 snprintf(ir->name, sizeof(ir->name), "%s (%04x:%04x)", 1230 mceusb_model[ir->model].name ? 1231 mceusb_model[ir->model].name : 1232 "Media Center Ed. eHome Infrared Remote Transceiver", 1233 le16_to_cpu(ir->usbdev->descriptor.idVendor), 1234 le16_to_cpu(ir->usbdev->descriptor.idProduct)); 1235 1236 usb_make_path(ir->usbdev, ir->phys, sizeof(ir->phys)); 1237 1238 rc->input_name = ir->name; 1239 rc->input_phys = ir->phys; 1240 usb_to_input_id(ir->usbdev, &rc->input_id); 1241 rc->dev.parent = dev; 1242 rc->priv = ir; 1243 rc->driver_type = RC_DRIVER_IR_RAW; 1244 rc->allowed_protocols = RC_BIT_ALL; 1245 rc->timeout = MS_TO_NS(100); 1246 if (!ir->flags.no_tx) { 1247 rc->s_tx_mask = mceusb_set_tx_mask; 1248 rc->s_tx_carrier = mceusb_set_tx_carrier; 1249 rc->tx_ir = mceusb_tx_ir; 1250 } 1251 rc->driver_name = DRIVER_NAME; 1252 1253 switch (le16_to_cpu(udev->descriptor.idVendor)) { 1254 case VENDOR_HAUPPAUGE: 1255 rc->map_name = RC_MAP_HAUPPAUGE; 1256 break; 1257 case VENDOR_PCTV: 1258 rc->map_name = RC_MAP_PINNACLE_PCTV_HD; 1259 break; 1260 default: 1261 rc->map_name = RC_MAP_RC6_MCE; 1262 } 1263 if (mceusb_model[ir->model].rc_map) 1264 rc->map_name = mceusb_model[ir->model].rc_map; 1265 1266 ret = rc_register_device(rc); 1267 if (ret < 0) { 1268 dev_err(dev, "remote dev registration failed"); 1269 goto out; 1270 } 1271 1272 return rc; 1273 1274 out: 1275 rc_free_device(rc); 1276 return NULL; 1277 } 1278 1279 static int mceusb_dev_probe(struct usb_interface *intf, 1280 const struct usb_device_id *id) 1281 { 1282 struct usb_device *dev = interface_to_usbdev(intf); 1283 struct usb_host_interface *idesc; 1284 struct usb_endpoint_descriptor *ep = NULL; 1285 struct usb_endpoint_descriptor *ep_in = NULL; 1286 struct usb_endpoint_descriptor *ep_out = NULL; 1287 struct mceusb_dev *ir = NULL; 1288 int pipe, maxp, i; 1289 char buf[63], name[128] = ""; 1290 enum mceusb_model_type model = id->driver_info; 1291 bool is_gen3; 1292 bool is_microsoft_gen1; 1293 bool tx_mask_normal; 1294 int ir_intfnum; 1295 1296 dev_dbg(&intf->dev, "%s called", __func__); 1297 1298 idesc = intf->cur_altsetting; 1299 1300 is_gen3 = mceusb_model[model].mce_gen3; 1301 is_microsoft_gen1 = mceusb_model[model].mce_gen1; 1302 tx_mask_normal = mceusb_model[model].tx_mask_normal; 1303 ir_intfnum = mceusb_model[model].ir_intfnum; 1304 1305 /* There are multi-function devices with non-IR interfaces */ 1306 if (idesc->desc.bInterfaceNumber != ir_intfnum) 1307 return -ENODEV; 1308 1309 /* step through the endpoints to find first bulk in and out endpoint */ 1310 for (i = 0; i < idesc->desc.bNumEndpoints; ++i) { 1311 ep = &idesc->endpoint[i].desc; 1312 1313 if (ep_in == NULL) { 1314 if (usb_endpoint_is_bulk_in(ep)) { 1315 ep_in = ep; 1316 dev_dbg(&intf->dev, "acceptable bulk inbound endpoint found\n"); 1317 } else if (usb_endpoint_is_int_in(ep)) { 1318 ep_in = ep; 1319 ep_in->bInterval = 1; 1320 dev_dbg(&intf->dev, "acceptable interrupt inbound endpoint found\n"); 1321 } 1322 } 1323 1324 if (ep_out == NULL) { 1325 if (usb_endpoint_is_bulk_out(ep)) { 1326 ep_out = ep; 1327 dev_dbg(&intf->dev, "acceptable bulk outbound endpoint found\n"); 1328 } else if (usb_endpoint_is_int_out(ep)) { 1329 ep_out = ep; 1330 ep_out->bInterval = 1; 1331 dev_dbg(&intf->dev, "acceptable interrupt outbound endpoint found\n"); 1332 } 1333 } 1334 } 1335 if (ep_in == NULL) { 1336 dev_dbg(&intf->dev, "inbound and/or endpoint not found"); 1337 return -ENODEV; 1338 } 1339 1340 if (usb_endpoint_xfer_int(ep_in)) 1341 pipe = usb_rcvintpipe(dev, ep_in->bEndpointAddress); 1342 else 1343 pipe = usb_rcvbulkpipe(dev, ep_in->bEndpointAddress); 1344 maxp = usb_maxpacket(dev, pipe, usb_pipeout(pipe)); 1345 1346 ir = kzalloc(sizeof(struct mceusb_dev), GFP_KERNEL); 1347 if (!ir) 1348 goto mem_alloc_fail; 1349 1350 ir->buf_in = usb_alloc_coherent(dev, maxp, GFP_ATOMIC, &ir->dma_in); 1351 if (!ir->buf_in) 1352 goto buf_in_alloc_fail; 1353 1354 ir->urb_in = usb_alloc_urb(0, GFP_KERNEL); 1355 if (!ir->urb_in) 1356 goto urb_in_alloc_fail; 1357 1358 ir->usbdev = usb_get_dev(dev); 1359 ir->dev = &intf->dev; 1360 ir->len_in = maxp; 1361 ir->flags.microsoft_gen1 = is_microsoft_gen1; 1362 ir->flags.tx_mask_normal = tx_mask_normal; 1363 ir->flags.no_tx = mceusb_model[model].no_tx; 1364 ir->model = model; 1365 1366 /* Saving usb interface data for use by the transmitter routine */ 1367 ir->usb_ep_out = ep_out; 1368 1369 if (dev->descriptor.iManufacturer 1370 && usb_string(dev, dev->descriptor.iManufacturer, 1371 buf, sizeof(buf)) > 0) 1372 strlcpy(name, buf, sizeof(name)); 1373 if (dev->descriptor.iProduct 1374 && usb_string(dev, dev->descriptor.iProduct, 1375 buf, sizeof(buf)) > 0) 1376 snprintf(name + strlen(name), sizeof(name) - strlen(name), 1377 " %s", buf); 1378 1379 ir->rc = mceusb_init_rc_dev(ir); 1380 if (!ir->rc) 1381 goto rc_dev_fail; 1382 1383 /* wire up inbound data handler */ 1384 usb_fill_int_urb(ir->urb_in, dev, pipe, ir->buf_in, maxp, 1385 mceusb_dev_recv, ir, ep_in->bInterval); 1386 ir->urb_in->transfer_dma = ir->dma_in; 1387 ir->urb_in->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; 1388 1389 /* flush buffers on the device */ 1390 dev_dbg(&intf->dev, "Flushing receive buffers\n"); 1391 mce_flush_rx_buffer(ir, maxp); 1392 1393 /* figure out which firmware/emulator version this hardware has */ 1394 mceusb_get_emulator_version(ir); 1395 1396 /* initialize device */ 1397 if (ir->flags.microsoft_gen1) 1398 mceusb_gen1_init(ir); 1399 else if (!is_gen3) 1400 mceusb_gen2_init(ir); 1401 1402 mceusb_get_parameters(ir); 1403 1404 mceusb_flash_led(ir); 1405 1406 if (!ir->flags.no_tx) 1407 mceusb_set_tx_mask(ir->rc, MCE_DEFAULT_TX_MASK); 1408 1409 usb_set_intfdata(intf, ir); 1410 1411 /* enable wake via this device */ 1412 device_set_wakeup_capable(ir->dev, true); 1413 device_set_wakeup_enable(ir->dev, true); 1414 1415 dev_info(&intf->dev, "Registered %s with mce emulator interface version %x", 1416 name, ir->emver); 1417 dev_info(&intf->dev, "%x tx ports (0x%x cabled) and %x rx sensors (0x%x active)", 1418 ir->num_txports, ir->txports_cabled, 1419 ir->num_rxports, ir->rxports_active); 1420 1421 return 0; 1422 1423 /* Error-handling path */ 1424 rc_dev_fail: 1425 usb_put_dev(ir->usbdev); 1426 usb_free_urb(ir->urb_in); 1427 urb_in_alloc_fail: 1428 usb_free_coherent(dev, maxp, ir->buf_in, ir->dma_in); 1429 buf_in_alloc_fail: 1430 kfree(ir); 1431 mem_alloc_fail: 1432 dev_err(&intf->dev, "%s: device setup failed!", __func__); 1433 1434 return -ENOMEM; 1435 } 1436 1437 1438 static void mceusb_dev_disconnect(struct usb_interface *intf) 1439 { 1440 struct usb_device *dev = interface_to_usbdev(intf); 1441 struct mceusb_dev *ir = usb_get_intfdata(intf); 1442 1443 usb_set_intfdata(intf, NULL); 1444 1445 if (!ir) 1446 return; 1447 1448 ir->usbdev = NULL; 1449 rc_unregister_device(ir->rc); 1450 usb_kill_urb(ir->urb_in); 1451 usb_free_urb(ir->urb_in); 1452 usb_free_coherent(dev, ir->len_in, ir->buf_in, ir->dma_in); 1453 usb_put_dev(dev); 1454 1455 kfree(ir); 1456 } 1457 1458 static int mceusb_dev_suspend(struct usb_interface *intf, pm_message_t message) 1459 { 1460 struct mceusb_dev *ir = usb_get_intfdata(intf); 1461 dev_info(ir->dev, "suspend"); 1462 usb_kill_urb(ir->urb_in); 1463 return 0; 1464 } 1465 1466 static int mceusb_dev_resume(struct usb_interface *intf) 1467 { 1468 struct mceusb_dev *ir = usb_get_intfdata(intf); 1469 dev_info(ir->dev, "resume"); 1470 if (usb_submit_urb(ir->urb_in, GFP_ATOMIC)) 1471 return -EIO; 1472 return 0; 1473 } 1474 1475 static struct usb_driver mceusb_dev_driver = { 1476 .name = DRIVER_NAME, 1477 .probe = mceusb_dev_probe, 1478 .disconnect = mceusb_dev_disconnect, 1479 .suspend = mceusb_dev_suspend, 1480 .resume = mceusb_dev_resume, 1481 .reset_resume = mceusb_dev_resume, 1482 .id_table = mceusb_dev_table 1483 }; 1484 1485 module_usb_driver(mceusb_dev_driver); 1486 1487 MODULE_DESCRIPTION(DRIVER_DESC); 1488 MODULE_AUTHOR(DRIVER_AUTHOR); 1489 MODULE_LICENSE("GPL"); 1490 MODULE_DEVICE_TABLE(usb, mceusb_dev_table); 1491