1 /* 2 * Driver for ITE Tech Inc. IT8712F/IT8512 CIR 3 * 4 * Copyright (C) 2010 Juan Jesús García de Soria <skandalfo@gmail.com> 5 * 6 * This program is free software; you can redistribute it and/or 7 * modify it under the terms of the GNU General Public License as 8 * published by the Free Software Foundation; either version 2 of the 9 * License, or (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, but 12 * WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU 14 * General Public License for more details. 15 * 16 * Inspired by the original lirc_it87 and lirc_ite8709 drivers, on top of the 17 * skeleton provided by the nuvoton-cir driver. 18 * 19 * The lirc_it87 driver was originally written by Hans-Gunter Lutke Uphues 20 * <hg_lu@web.de> in 2001, with enhancements by Christoph Bartelmus 21 * <lirc@bartelmus.de>, Andrew Calkin <r_tay@hotmail.com> and James Edwards 22 * <jimbo-lirc@edwardsclan.net>. 23 * 24 * The lirc_ite8709 driver was written by Grégory Lardière 25 * <spmf2004-lirc@yahoo.fr> in 2008. 26 */ 27 28 #include <linux/kernel.h> 29 #include <linux/module.h> 30 #include <linux/pnp.h> 31 #include <linux/io.h> 32 #include <linux/interrupt.h> 33 #include <linux/sched.h> 34 #include <linux/delay.h> 35 #include <linux/slab.h> 36 #include <linux/input.h> 37 #include <linux/bitops.h> 38 #include <media/rc-core.h> 39 #include <linux/pci_ids.h> 40 41 #include "ite-cir.h" 42 43 /* module parameters */ 44 45 /* debug level */ 46 static int debug; 47 module_param(debug, int, S_IRUGO | S_IWUSR); 48 MODULE_PARM_DESC(debug, "Enable debugging output"); 49 50 /* low limit for RX carrier freq, Hz, 0 for no RX demodulation */ 51 static int rx_low_carrier_freq; 52 module_param(rx_low_carrier_freq, int, S_IRUGO | S_IWUSR); 53 MODULE_PARM_DESC(rx_low_carrier_freq, "Override low RX carrier frequency, Hz, 0 for no RX demodulation"); 54 55 /* high limit for RX carrier freq, Hz, 0 for no RX demodulation */ 56 static int rx_high_carrier_freq; 57 module_param(rx_high_carrier_freq, int, S_IRUGO | S_IWUSR); 58 MODULE_PARM_DESC(rx_high_carrier_freq, "Override high RX carrier frequency, Hz, 0 for no RX demodulation"); 59 60 /* override tx carrier frequency */ 61 static int tx_carrier_freq; 62 module_param(tx_carrier_freq, int, S_IRUGO | S_IWUSR); 63 MODULE_PARM_DESC(tx_carrier_freq, "Override TX carrier frequency, Hz"); 64 65 /* override tx duty cycle */ 66 static int tx_duty_cycle; 67 module_param(tx_duty_cycle, int, S_IRUGO | S_IWUSR); 68 MODULE_PARM_DESC(tx_duty_cycle, "Override TX duty cycle, 1-100"); 69 70 /* override default sample period */ 71 static long sample_period; 72 module_param(sample_period, long, S_IRUGO | S_IWUSR); 73 MODULE_PARM_DESC(sample_period, "Override carrier sample period, us"); 74 75 /* override detected model id */ 76 static int model_number = -1; 77 module_param(model_number, int, S_IRUGO | S_IWUSR); 78 MODULE_PARM_DESC(model_number, "Use this model number, don't autodetect"); 79 80 81 /* HW-independent code functions */ 82 83 /* check whether carrier frequency is high frequency */ 84 static inline bool ite_is_high_carrier_freq(unsigned int freq) 85 { 86 return freq >= ITE_HCF_MIN_CARRIER_FREQ; 87 } 88 89 /* get the bits required to program the carrier frequency in CFQ bits, 90 * unshifted */ 91 static u8 ite_get_carrier_freq_bits(unsigned int freq) 92 { 93 if (ite_is_high_carrier_freq(freq)) { 94 if (freq < 425000) 95 return ITE_CFQ_400; 96 97 else if (freq < 465000) 98 return ITE_CFQ_450; 99 100 else if (freq < 490000) 101 return ITE_CFQ_480; 102 103 else 104 return ITE_CFQ_500; 105 } else { 106 /* trim to limits */ 107 if (freq < ITE_LCF_MIN_CARRIER_FREQ) 108 freq = ITE_LCF_MIN_CARRIER_FREQ; 109 if (freq > ITE_LCF_MAX_CARRIER_FREQ) 110 freq = ITE_LCF_MAX_CARRIER_FREQ; 111 112 /* convert to kHz and subtract the base freq */ 113 freq = 114 DIV_ROUND_CLOSEST(freq - ITE_LCF_MIN_CARRIER_FREQ, 115 1000); 116 117 return (u8) freq; 118 } 119 } 120 121 /* get the bits required to program the pulse with in TXMPW */ 122 static u8 ite_get_pulse_width_bits(unsigned int freq, int duty_cycle) 123 { 124 unsigned long period_ns, on_ns; 125 126 /* sanitize freq into range */ 127 if (freq < ITE_LCF_MIN_CARRIER_FREQ) 128 freq = ITE_LCF_MIN_CARRIER_FREQ; 129 if (freq > ITE_HCF_MAX_CARRIER_FREQ) 130 freq = ITE_HCF_MAX_CARRIER_FREQ; 131 132 period_ns = 1000000000UL / freq; 133 on_ns = period_ns * duty_cycle / 100; 134 135 if (ite_is_high_carrier_freq(freq)) { 136 if (on_ns < 750) 137 return ITE_TXMPW_A; 138 139 else if (on_ns < 850) 140 return ITE_TXMPW_B; 141 142 else if (on_ns < 950) 143 return ITE_TXMPW_C; 144 145 else if (on_ns < 1080) 146 return ITE_TXMPW_D; 147 148 else 149 return ITE_TXMPW_E; 150 } else { 151 if (on_ns < 6500) 152 return ITE_TXMPW_A; 153 154 else if (on_ns < 7850) 155 return ITE_TXMPW_B; 156 157 else if (on_ns < 9650) 158 return ITE_TXMPW_C; 159 160 else if (on_ns < 11950) 161 return ITE_TXMPW_D; 162 163 else 164 return ITE_TXMPW_E; 165 } 166 } 167 168 /* decode raw bytes as received by the hardware, and push them to the ir-core 169 * layer */ 170 static void ite_decode_bytes(struct ite_dev *dev, const u8 * data, int 171 length) 172 { 173 u32 sample_period; 174 unsigned long *ldata; 175 unsigned int next_one, next_zero, size; 176 DEFINE_IR_RAW_EVENT(ev); 177 178 if (length == 0) 179 return; 180 181 sample_period = dev->params.sample_period; 182 ldata = (unsigned long *)data; 183 size = length << 3; 184 next_one = find_next_bit_le(ldata, size, 0); 185 if (next_one > 0) { 186 ev.pulse = true; 187 ev.duration = 188 ITE_BITS_TO_NS(next_one, sample_period); 189 ir_raw_event_store_with_filter(dev->rdev, &ev); 190 } 191 192 while (next_one < size) { 193 next_zero = find_next_zero_bit_le(ldata, size, next_one + 1); 194 ev.pulse = false; 195 ev.duration = ITE_BITS_TO_NS(next_zero - next_one, sample_period); 196 ir_raw_event_store_with_filter(dev->rdev, &ev); 197 198 if (next_zero < size) { 199 next_one = 200 find_next_bit_le(ldata, 201 size, 202 next_zero + 1); 203 ev.pulse = true; 204 ev.duration = 205 ITE_BITS_TO_NS(next_one - next_zero, 206 sample_period); 207 ir_raw_event_store_with_filter 208 (dev->rdev, &ev); 209 } else 210 next_one = size; 211 } 212 213 ir_raw_event_handle(dev->rdev); 214 215 ite_dbg_verbose("decoded %d bytes.", length); 216 } 217 218 /* set all the rx/tx carrier parameters; this must be called with the device 219 * spinlock held */ 220 static void ite_set_carrier_params(struct ite_dev *dev) 221 { 222 unsigned int freq, low_freq, high_freq; 223 int allowance; 224 bool use_demodulator; 225 bool for_tx = dev->transmitting; 226 227 ite_dbg("%s called", __func__); 228 229 if (for_tx) { 230 /* we don't need no stinking calculations */ 231 freq = dev->params.tx_carrier_freq; 232 allowance = ITE_RXDCR_DEFAULT; 233 use_demodulator = false; 234 } else { 235 low_freq = dev->params.rx_low_carrier_freq; 236 high_freq = dev->params.rx_high_carrier_freq; 237 238 if (low_freq == 0) { 239 /* don't demodulate */ 240 freq = 241 ITE_DEFAULT_CARRIER_FREQ; 242 allowance = ITE_RXDCR_DEFAULT; 243 use_demodulator = false; 244 } else { 245 /* calculate the middle freq */ 246 freq = (low_freq + high_freq) / 2; 247 248 /* calculate the allowance */ 249 allowance = 250 DIV_ROUND_CLOSEST(10000 * (high_freq - low_freq), 251 ITE_RXDCR_PER_10000_STEP 252 * (high_freq + low_freq)); 253 254 if (allowance < 1) 255 allowance = 1; 256 257 if (allowance > ITE_RXDCR_MAX) 258 allowance = ITE_RXDCR_MAX; 259 260 use_demodulator = true; 261 } 262 } 263 264 /* set the carrier parameters in a device-dependent way */ 265 dev->params.set_carrier_params(dev, ite_is_high_carrier_freq(freq), 266 use_demodulator, ite_get_carrier_freq_bits(freq), allowance, 267 ite_get_pulse_width_bits(freq, dev->params.tx_duty_cycle)); 268 } 269 270 /* interrupt service routine for incoming and outgoing CIR data */ 271 static irqreturn_t ite_cir_isr(int irq, void *data) 272 { 273 struct ite_dev *dev = data; 274 unsigned long flags; 275 irqreturn_t ret = IRQ_RETVAL(IRQ_NONE); 276 u8 rx_buf[ITE_RX_FIFO_LEN]; 277 int rx_bytes; 278 int iflags; 279 280 ite_dbg_verbose("%s firing", __func__); 281 282 /* grab the spinlock */ 283 spin_lock_irqsave(&dev->lock, flags); 284 285 /* read the interrupt flags */ 286 iflags = dev->params.get_irq_causes(dev); 287 288 /* check for the receive interrupt */ 289 if (iflags & (ITE_IRQ_RX_FIFO | ITE_IRQ_RX_FIFO_OVERRUN)) { 290 /* read the FIFO bytes */ 291 rx_bytes = 292 dev->params.get_rx_bytes(dev, rx_buf, 293 ITE_RX_FIFO_LEN); 294 295 if (rx_bytes > 0) { 296 /* drop the spinlock, since the ir-core layer 297 * may call us back again through 298 * ite_s_idle() */ 299 spin_unlock_irqrestore(&dev-> 300 lock, 301 flags); 302 303 /* decode the data we've just received */ 304 ite_decode_bytes(dev, rx_buf, 305 rx_bytes); 306 307 /* reacquire the spinlock */ 308 spin_lock_irqsave(&dev->lock, 309 flags); 310 311 /* mark the interrupt as serviced */ 312 ret = IRQ_RETVAL(IRQ_HANDLED); 313 } 314 } else if (iflags & ITE_IRQ_TX_FIFO) { 315 /* FIFO space available interrupt */ 316 ite_dbg_verbose("got interrupt for TX FIFO"); 317 318 /* wake any sleeping transmitter */ 319 wake_up_interruptible(&dev->tx_queue); 320 321 /* mark the interrupt as serviced */ 322 ret = IRQ_RETVAL(IRQ_HANDLED); 323 } 324 325 /* drop the spinlock */ 326 spin_unlock_irqrestore(&dev->lock, flags); 327 328 ite_dbg_verbose("%s done returning %d", __func__, (int)ret); 329 330 return ret; 331 } 332 333 /* set the rx carrier freq range, guess it's in Hz... */ 334 static int ite_set_rx_carrier_range(struct rc_dev *rcdev, u32 carrier_low, u32 335 carrier_high) 336 { 337 unsigned long flags; 338 struct ite_dev *dev = rcdev->priv; 339 340 spin_lock_irqsave(&dev->lock, flags); 341 dev->params.rx_low_carrier_freq = carrier_low; 342 dev->params.rx_high_carrier_freq = carrier_high; 343 ite_set_carrier_params(dev); 344 spin_unlock_irqrestore(&dev->lock, flags); 345 346 return 0; 347 } 348 349 /* set the tx carrier freq, guess it's in Hz... */ 350 static int ite_set_tx_carrier(struct rc_dev *rcdev, u32 carrier) 351 { 352 unsigned long flags; 353 struct ite_dev *dev = rcdev->priv; 354 355 spin_lock_irqsave(&dev->lock, flags); 356 dev->params.tx_carrier_freq = carrier; 357 ite_set_carrier_params(dev); 358 spin_unlock_irqrestore(&dev->lock, flags); 359 360 return 0; 361 } 362 363 /* set the tx duty cycle by controlling the pulse width */ 364 static int ite_set_tx_duty_cycle(struct rc_dev *rcdev, u32 duty_cycle) 365 { 366 unsigned long flags; 367 struct ite_dev *dev = rcdev->priv; 368 369 spin_lock_irqsave(&dev->lock, flags); 370 dev->params.tx_duty_cycle = duty_cycle; 371 ite_set_carrier_params(dev); 372 spin_unlock_irqrestore(&dev->lock, flags); 373 374 return 0; 375 } 376 377 /* transmit out IR pulses; what you get here is a batch of alternating 378 * pulse/space/pulse/space lengths that we should write out completely through 379 * the FIFO, blocking on a full FIFO */ 380 static int ite_tx_ir(struct rc_dev *rcdev, unsigned *txbuf, unsigned n) 381 { 382 unsigned long flags; 383 struct ite_dev *dev = rcdev->priv; 384 bool is_pulse = false; 385 int remaining_us, fifo_avail, fifo_remaining, last_idx = 0; 386 int max_rle_us, next_rle_us; 387 int ret = n; 388 u8 last_sent[ITE_TX_FIFO_LEN]; 389 u8 val; 390 391 ite_dbg("%s called", __func__); 392 393 /* clear the array just in case */ 394 memset(last_sent, 0, ARRAY_SIZE(last_sent)); 395 396 spin_lock_irqsave(&dev->lock, flags); 397 398 /* let everybody know we're now transmitting */ 399 dev->transmitting = true; 400 401 /* and set the carrier values for transmission */ 402 ite_set_carrier_params(dev); 403 404 /* calculate how much time we can send in one byte */ 405 max_rle_us = 406 (ITE_BAUDRATE_DIVISOR * dev->params.sample_period * 407 ITE_TX_MAX_RLE) / 1000; 408 409 /* disable the receiver */ 410 dev->params.disable_rx(dev); 411 412 /* this is where we'll begin filling in the FIFO, until it's full. 413 * then we'll just activate the interrupt, wait for it to wake us up 414 * again, disable it, continue filling the FIFO... until everything 415 * has been pushed out */ 416 fifo_avail = 417 ITE_TX_FIFO_LEN - dev->params.get_tx_used_slots(dev); 418 419 while (n > 0 && dev->in_use) { 420 /* transmit the next sample */ 421 is_pulse = !is_pulse; 422 remaining_us = *(txbuf++); 423 n--; 424 425 ite_dbg("%s: %ld", 426 ((is_pulse) ? "pulse" : "space"), 427 (long int) 428 remaining_us); 429 430 /* repeat while the pulse is non-zero length */ 431 while (remaining_us > 0 && dev->in_use) { 432 if (remaining_us > max_rle_us) 433 next_rle_us = max_rle_us; 434 435 else 436 next_rle_us = remaining_us; 437 438 remaining_us -= next_rle_us; 439 440 /* check what's the length we have to pump out */ 441 val = (ITE_TX_MAX_RLE * next_rle_us) / max_rle_us; 442 443 /* put it into the sent buffer */ 444 last_sent[last_idx++] = val; 445 last_idx &= (ITE_TX_FIFO_LEN); 446 447 /* encode it for 7 bits */ 448 val = (val - 1) & ITE_TX_RLE_MASK; 449 450 /* take into account pulse/space prefix */ 451 if (is_pulse) 452 val |= ITE_TX_PULSE; 453 454 else 455 val |= ITE_TX_SPACE; 456 457 /* 458 * if we get to 0 available, read again, just in case 459 * some other slot got freed 460 */ 461 if (fifo_avail <= 0) 462 fifo_avail = ITE_TX_FIFO_LEN - dev->params.get_tx_used_slots(dev); 463 464 /* if it's still full */ 465 if (fifo_avail <= 0) { 466 /* enable the tx interrupt */ 467 dev->params. 468 enable_tx_interrupt(dev); 469 470 /* drop the spinlock */ 471 spin_unlock_irqrestore(&dev->lock, flags); 472 473 /* wait for the FIFO to empty enough */ 474 wait_event_interruptible(dev->tx_queue, (fifo_avail = ITE_TX_FIFO_LEN - dev->params.get_tx_used_slots(dev)) >= 8); 475 476 /* get the spinlock again */ 477 spin_lock_irqsave(&dev->lock, flags); 478 479 /* disable the tx interrupt again. */ 480 dev->params. 481 disable_tx_interrupt(dev); 482 } 483 484 /* now send the byte through the FIFO */ 485 dev->params.put_tx_byte(dev, val); 486 fifo_avail--; 487 } 488 } 489 490 /* wait and don't return until the whole FIFO has been sent out; 491 * otherwise we could configure the RX carrier params instead of the 492 * TX ones while the transmission is still being performed! */ 493 fifo_remaining = dev->params.get_tx_used_slots(dev); 494 remaining_us = 0; 495 while (fifo_remaining > 0) { 496 fifo_remaining--; 497 last_idx--; 498 last_idx &= (ITE_TX_FIFO_LEN - 1); 499 remaining_us += last_sent[last_idx]; 500 } 501 remaining_us = (remaining_us * max_rle_us) / (ITE_TX_MAX_RLE); 502 503 /* drop the spinlock while we sleep */ 504 spin_unlock_irqrestore(&dev->lock, flags); 505 506 /* sleep remaining_us microseconds */ 507 mdelay(DIV_ROUND_UP(remaining_us, 1000)); 508 509 /* reacquire the spinlock */ 510 spin_lock_irqsave(&dev->lock, flags); 511 512 /* now we're not transmitting anymore */ 513 dev->transmitting = false; 514 515 /* and set the carrier values for reception */ 516 ite_set_carrier_params(dev); 517 518 /* reenable the receiver */ 519 if (dev->in_use) 520 dev->params.enable_rx(dev); 521 522 /* notify transmission end */ 523 wake_up_interruptible(&dev->tx_ended); 524 525 spin_unlock_irqrestore(&dev->lock, flags); 526 527 return ret; 528 } 529 530 /* idle the receiver if needed */ 531 static void ite_s_idle(struct rc_dev *rcdev, bool enable) 532 { 533 unsigned long flags; 534 struct ite_dev *dev = rcdev->priv; 535 536 ite_dbg("%s called", __func__); 537 538 if (enable) { 539 spin_lock_irqsave(&dev->lock, flags); 540 dev->params.idle_rx(dev); 541 spin_unlock_irqrestore(&dev->lock, flags); 542 } 543 } 544 545 546 /* IT8712F HW-specific functions */ 547 548 /* retrieve a bitmask of the current causes for a pending interrupt; this may 549 * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN 550 * */ 551 static int it87_get_irq_causes(struct ite_dev *dev) 552 { 553 u8 iflags; 554 int ret = 0; 555 556 ite_dbg("%s called", __func__); 557 558 /* read the interrupt flags */ 559 iflags = inb(dev->cir_addr + IT87_IIR) & IT87_II; 560 561 switch (iflags) { 562 case IT87_II_RXDS: 563 ret = ITE_IRQ_RX_FIFO; 564 break; 565 case IT87_II_RXFO: 566 ret = ITE_IRQ_RX_FIFO_OVERRUN; 567 break; 568 case IT87_II_TXLDL: 569 ret = ITE_IRQ_TX_FIFO; 570 break; 571 } 572 573 return ret; 574 } 575 576 /* set the carrier parameters; to be called with the spinlock held */ 577 static void it87_set_carrier_params(struct ite_dev *dev, bool high_freq, 578 bool use_demodulator, 579 u8 carrier_freq_bits, u8 allowance_bits, 580 u8 pulse_width_bits) 581 { 582 u8 val; 583 584 ite_dbg("%s called", __func__); 585 586 /* program the RCR register */ 587 val = inb(dev->cir_addr + IT87_RCR) 588 & ~(IT87_HCFS | IT87_RXEND | IT87_RXDCR); 589 590 if (high_freq) 591 val |= IT87_HCFS; 592 593 if (use_demodulator) 594 val |= IT87_RXEND; 595 596 val |= allowance_bits; 597 598 outb(val, dev->cir_addr + IT87_RCR); 599 600 /* program the TCR2 register */ 601 outb((carrier_freq_bits << IT87_CFQ_SHIFT) | pulse_width_bits, 602 dev->cir_addr + IT87_TCR2); 603 } 604 605 /* read up to buf_size bytes from the RX FIFO; to be called with the spinlock 606 * held */ 607 static int it87_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size) 608 { 609 int fifo, read = 0; 610 611 ite_dbg("%s called", __func__); 612 613 /* read how many bytes are still in the FIFO */ 614 fifo = inb(dev->cir_addr + IT87_RSR) & IT87_RXFBC; 615 616 while (fifo > 0 && buf_size > 0) { 617 *(buf++) = inb(dev->cir_addr + IT87_DR); 618 fifo--; 619 read++; 620 buf_size--; 621 } 622 623 return read; 624 } 625 626 /* return how many bytes are still in the FIFO; this will be called 627 * with the device spinlock NOT HELD while waiting for the TX FIFO to get 628 * empty; let's expect this won't be a problem */ 629 static int it87_get_tx_used_slots(struct ite_dev *dev) 630 { 631 ite_dbg("%s called", __func__); 632 633 return inb(dev->cir_addr + IT87_TSR) & IT87_TXFBC; 634 } 635 636 /* put a byte to the TX fifo; this should be called with the spinlock held */ 637 static void it87_put_tx_byte(struct ite_dev *dev, u8 value) 638 { 639 outb(value, dev->cir_addr + IT87_DR); 640 } 641 642 /* idle the receiver so that we won't receive samples until another 643 pulse is detected; this must be called with the device spinlock held */ 644 static void it87_idle_rx(struct ite_dev *dev) 645 { 646 ite_dbg("%s called", __func__); 647 648 /* disable streaming by clearing RXACT writing it as 1 */ 649 outb(inb(dev->cir_addr + IT87_RCR) | IT87_RXACT, 650 dev->cir_addr + IT87_RCR); 651 652 /* clear the FIFO */ 653 outb(inb(dev->cir_addr + IT87_TCR1) | IT87_FIFOCLR, 654 dev->cir_addr + IT87_TCR1); 655 } 656 657 /* disable the receiver; this must be called with the device spinlock held */ 658 static void it87_disable_rx(struct ite_dev *dev) 659 { 660 ite_dbg("%s called", __func__); 661 662 /* disable the receiver interrupts */ 663 outb(inb(dev->cir_addr + IT87_IER) & ~(IT87_RDAIE | IT87_RFOIE), 664 dev->cir_addr + IT87_IER); 665 666 /* disable the receiver */ 667 outb(inb(dev->cir_addr + IT87_RCR) & ~IT87_RXEN, 668 dev->cir_addr + IT87_RCR); 669 670 /* clear the FIFO and RXACT (actually RXACT should have been cleared 671 * in the previous outb() call) */ 672 it87_idle_rx(dev); 673 } 674 675 /* enable the receiver; this must be called with the device spinlock held */ 676 static void it87_enable_rx(struct ite_dev *dev) 677 { 678 ite_dbg("%s called", __func__); 679 680 /* enable the receiver by setting RXEN */ 681 outb(inb(dev->cir_addr + IT87_RCR) | IT87_RXEN, 682 dev->cir_addr + IT87_RCR); 683 684 /* just prepare it to idle for the next reception */ 685 it87_idle_rx(dev); 686 687 /* enable the receiver interrupts and master enable flag */ 688 outb(inb(dev->cir_addr + IT87_IER) | IT87_RDAIE | IT87_RFOIE | IT87_IEC, 689 dev->cir_addr + IT87_IER); 690 } 691 692 /* disable the transmitter interrupt; this must be called with the device 693 * spinlock held */ 694 static void it87_disable_tx_interrupt(struct ite_dev *dev) 695 { 696 ite_dbg("%s called", __func__); 697 698 /* disable the transmitter interrupts */ 699 outb(inb(dev->cir_addr + IT87_IER) & ~IT87_TLDLIE, 700 dev->cir_addr + IT87_IER); 701 } 702 703 /* enable the transmitter interrupt; this must be called with the device 704 * spinlock held */ 705 static void it87_enable_tx_interrupt(struct ite_dev *dev) 706 { 707 ite_dbg("%s called", __func__); 708 709 /* enable the transmitter interrupts and master enable flag */ 710 outb(inb(dev->cir_addr + IT87_IER) | IT87_TLDLIE | IT87_IEC, 711 dev->cir_addr + IT87_IER); 712 } 713 714 /* disable the device; this must be called with the device spinlock held */ 715 static void it87_disable(struct ite_dev *dev) 716 { 717 ite_dbg("%s called", __func__); 718 719 /* clear out all interrupt enable flags */ 720 outb(inb(dev->cir_addr + IT87_IER) & 721 ~(IT87_IEC | IT87_RFOIE | IT87_RDAIE | IT87_TLDLIE), 722 dev->cir_addr + IT87_IER); 723 724 /* disable the receiver */ 725 it87_disable_rx(dev); 726 727 /* erase the FIFO */ 728 outb(IT87_FIFOCLR | inb(dev->cir_addr + IT87_TCR1), 729 dev->cir_addr + IT87_TCR1); 730 } 731 732 /* initialize the hardware */ 733 static void it87_init_hardware(struct ite_dev *dev) 734 { 735 ite_dbg("%s called", __func__); 736 737 /* enable just the baud rate divisor register, 738 disabling all the interrupts at the same time */ 739 outb((inb(dev->cir_addr + IT87_IER) & 740 ~(IT87_IEC | IT87_RFOIE | IT87_RDAIE | IT87_TLDLIE)) | IT87_BR, 741 dev->cir_addr + IT87_IER); 742 743 /* write out the baud rate divisor */ 744 outb(ITE_BAUDRATE_DIVISOR & 0xff, dev->cir_addr + IT87_BDLR); 745 outb((ITE_BAUDRATE_DIVISOR >> 8) & 0xff, dev->cir_addr + IT87_BDHR); 746 747 /* disable the baud rate divisor register again */ 748 outb(inb(dev->cir_addr + IT87_IER) & ~IT87_BR, 749 dev->cir_addr + IT87_IER); 750 751 /* program the RCR register defaults */ 752 outb(ITE_RXDCR_DEFAULT, dev->cir_addr + IT87_RCR); 753 754 /* program the TCR1 register */ 755 outb(IT87_TXMPM_DEFAULT | IT87_TXENDF | IT87_TXRLE 756 | IT87_FIFOTL_DEFAULT | IT87_FIFOCLR, 757 dev->cir_addr + IT87_TCR1); 758 759 /* program the carrier parameters */ 760 ite_set_carrier_params(dev); 761 } 762 763 /* IT8512F on ITE8708 HW-specific functions */ 764 765 /* retrieve a bitmask of the current causes for a pending interrupt; this may 766 * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN 767 * */ 768 static int it8708_get_irq_causes(struct ite_dev *dev) 769 { 770 u8 iflags; 771 int ret = 0; 772 773 ite_dbg("%s called", __func__); 774 775 /* read the interrupt flags */ 776 iflags = inb(dev->cir_addr + IT8708_C0IIR); 777 778 if (iflags & IT85_TLDLI) 779 ret |= ITE_IRQ_TX_FIFO; 780 if (iflags & IT85_RDAI) 781 ret |= ITE_IRQ_RX_FIFO; 782 if (iflags & IT85_RFOI) 783 ret |= ITE_IRQ_RX_FIFO_OVERRUN; 784 785 return ret; 786 } 787 788 /* set the carrier parameters; to be called with the spinlock held */ 789 static void it8708_set_carrier_params(struct ite_dev *dev, bool high_freq, 790 bool use_demodulator, 791 u8 carrier_freq_bits, u8 allowance_bits, 792 u8 pulse_width_bits) 793 { 794 u8 val; 795 796 ite_dbg("%s called", __func__); 797 798 /* program the C0CFR register, with HRAE=1 */ 799 outb(inb(dev->cir_addr + IT8708_BANKSEL) | IT8708_HRAE, 800 dev->cir_addr + IT8708_BANKSEL); 801 802 val = (inb(dev->cir_addr + IT8708_C0CFR) 803 & ~(IT85_HCFS | IT85_CFQ)) | carrier_freq_bits; 804 805 if (high_freq) 806 val |= IT85_HCFS; 807 808 outb(val, dev->cir_addr + IT8708_C0CFR); 809 810 outb(inb(dev->cir_addr + IT8708_BANKSEL) & ~IT8708_HRAE, 811 dev->cir_addr + IT8708_BANKSEL); 812 813 /* program the C0RCR register */ 814 val = inb(dev->cir_addr + IT8708_C0RCR) 815 & ~(IT85_RXEND | IT85_RXDCR); 816 817 if (use_demodulator) 818 val |= IT85_RXEND; 819 820 val |= allowance_bits; 821 822 outb(val, dev->cir_addr + IT8708_C0RCR); 823 824 /* program the C0TCR register */ 825 val = inb(dev->cir_addr + IT8708_C0TCR) & ~IT85_TXMPW; 826 val |= pulse_width_bits; 827 outb(val, dev->cir_addr + IT8708_C0TCR); 828 } 829 830 /* read up to buf_size bytes from the RX FIFO; to be called with the spinlock 831 * held */ 832 static int it8708_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size) 833 { 834 int fifo, read = 0; 835 836 ite_dbg("%s called", __func__); 837 838 /* read how many bytes are still in the FIFO */ 839 fifo = inb(dev->cir_addr + IT8708_C0RFSR) & IT85_RXFBC; 840 841 while (fifo > 0 && buf_size > 0) { 842 *(buf++) = inb(dev->cir_addr + IT8708_C0DR); 843 fifo--; 844 read++; 845 buf_size--; 846 } 847 848 return read; 849 } 850 851 /* return how many bytes are still in the FIFO; this will be called 852 * with the device spinlock NOT HELD while waiting for the TX FIFO to get 853 * empty; let's expect this won't be a problem */ 854 static int it8708_get_tx_used_slots(struct ite_dev *dev) 855 { 856 ite_dbg("%s called", __func__); 857 858 return inb(dev->cir_addr + IT8708_C0TFSR) & IT85_TXFBC; 859 } 860 861 /* put a byte to the TX fifo; this should be called with the spinlock held */ 862 static void it8708_put_tx_byte(struct ite_dev *dev, u8 value) 863 { 864 outb(value, dev->cir_addr + IT8708_C0DR); 865 } 866 867 /* idle the receiver so that we won't receive samples until another 868 pulse is detected; this must be called with the device spinlock held */ 869 static void it8708_idle_rx(struct ite_dev *dev) 870 { 871 ite_dbg("%s called", __func__); 872 873 /* disable streaming by clearing RXACT writing it as 1 */ 874 outb(inb(dev->cir_addr + IT8708_C0RCR) | IT85_RXACT, 875 dev->cir_addr + IT8708_C0RCR); 876 877 /* clear the FIFO */ 878 outb(inb(dev->cir_addr + IT8708_C0MSTCR) | IT85_FIFOCLR, 879 dev->cir_addr + IT8708_C0MSTCR); 880 } 881 882 /* disable the receiver; this must be called with the device spinlock held */ 883 static void it8708_disable_rx(struct ite_dev *dev) 884 { 885 ite_dbg("%s called", __func__); 886 887 /* disable the receiver interrupts */ 888 outb(inb(dev->cir_addr + IT8708_C0IER) & 889 ~(IT85_RDAIE | IT85_RFOIE), 890 dev->cir_addr + IT8708_C0IER); 891 892 /* disable the receiver */ 893 outb(inb(dev->cir_addr + IT8708_C0RCR) & ~IT85_RXEN, 894 dev->cir_addr + IT8708_C0RCR); 895 896 /* clear the FIFO and RXACT (actually RXACT should have been cleared 897 * in the previous outb() call) */ 898 it8708_idle_rx(dev); 899 } 900 901 /* enable the receiver; this must be called with the device spinlock held */ 902 static void it8708_enable_rx(struct ite_dev *dev) 903 { 904 ite_dbg("%s called", __func__); 905 906 /* enable the receiver by setting RXEN */ 907 outb(inb(dev->cir_addr + IT8708_C0RCR) | IT85_RXEN, 908 dev->cir_addr + IT8708_C0RCR); 909 910 /* just prepare it to idle for the next reception */ 911 it8708_idle_rx(dev); 912 913 /* enable the receiver interrupts and master enable flag */ 914 outb(inb(dev->cir_addr + IT8708_C0IER) 915 |IT85_RDAIE | IT85_RFOIE | IT85_IEC, 916 dev->cir_addr + IT8708_C0IER); 917 } 918 919 /* disable the transmitter interrupt; this must be called with the device 920 * spinlock held */ 921 static void it8708_disable_tx_interrupt(struct ite_dev *dev) 922 { 923 ite_dbg("%s called", __func__); 924 925 /* disable the transmitter interrupts */ 926 outb(inb(dev->cir_addr + IT8708_C0IER) & ~IT85_TLDLIE, 927 dev->cir_addr + IT8708_C0IER); 928 } 929 930 /* enable the transmitter interrupt; this must be called with the device 931 * spinlock held */ 932 static void it8708_enable_tx_interrupt(struct ite_dev *dev) 933 { 934 ite_dbg("%s called", __func__); 935 936 /* enable the transmitter interrupts and master enable flag */ 937 outb(inb(dev->cir_addr + IT8708_C0IER) 938 |IT85_TLDLIE | IT85_IEC, 939 dev->cir_addr + IT8708_C0IER); 940 } 941 942 /* disable the device; this must be called with the device spinlock held */ 943 static void it8708_disable(struct ite_dev *dev) 944 { 945 ite_dbg("%s called", __func__); 946 947 /* clear out all interrupt enable flags */ 948 outb(inb(dev->cir_addr + IT8708_C0IER) & 949 ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE), 950 dev->cir_addr + IT8708_C0IER); 951 952 /* disable the receiver */ 953 it8708_disable_rx(dev); 954 955 /* erase the FIFO */ 956 outb(IT85_FIFOCLR | inb(dev->cir_addr + IT8708_C0MSTCR), 957 dev->cir_addr + IT8708_C0MSTCR); 958 } 959 960 /* initialize the hardware */ 961 static void it8708_init_hardware(struct ite_dev *dev) 962 { 963 ite_dbg("%s called", __func__); 964 965 /* disable all the interrupts */ 966 outb(inb(dev->cir_addr + IT8708_C0IER) & 967 ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE), 968 dev->cir_addr + IT8708_C0IER); 969 970 /* program the baud rate divisor */ 971 outb(inb(dev->cir_addr + IT8708_BANKSEL) | IT8708_HRAE, 972 dev->cir_addr + IT8708_BANKSEL); 973 974 outb(ITE_BAUDRATE_DIVISOR & 0xff, dev->cir_addr + IT8708_C0BDLR); 975 outb((ITE_BAUDRATE_DIVISOR >> 8) & 0xff, 976 dev->cir_addr + IT8708_C0BDHR); 977 978 outb(inb(dev->cir_addr + IT8708_BANKSEL) & ~IT8708_HRAE, 979 dev->cir_addr + IT8708_BANKSEL); 980 981 /* program the C0MSTCR register defaults */ 982 outb((inb(dev->cir_addr + IT8708_C0MSTCR) & 983 ~(IT85_ILSEL | IT85_ILE | IT85_FIFOTL | 984 IT85_FIFOCLR | IT85_RESET)) | 985 IT85_FIFOTL_DEFAULT, 986 dev->cir_addr + IT8708_C0MSTCR); 987 988 /* program the C0RCR register defaults */ 989 outb((inb(dev->cir_addr + IT8708_C0RCR) & 990 ~(IT85_RXEN | IT85_RDWOS | IT85_RXEND | 991 IT85_RXACT | IT85_RXDCR)) | 992 ITE_RXDCR_DEFAULT, 993 dev->cir_addr + IT8708_C0RCR); 994 995 /* program the C0TCR register defaults */ 996 outb((inb(dev->cir_addr + IT8708_C0TCR) & 997 ~(IT85_TXMPM | IT85_TXMPW)) 998 |IT85_TXRLE | IT85_TXENDF | 999 IT85_TXMPM_DEFAULT | IT85_TXMPW_DEFAULT, 1000 dev->cir_addr + IT8708_C0TCR); 1001 1002 /* program the carrier parameters */ 1003 ite_set_carrier_params(dev); 1004 } 1005 1006 /* IT8512F on ITE8709 HW-specific functions */ 1007 1008 /* read a byte from the SRAM module */ 1009 static inline u8 it8709_rm(struct ite_dev *dev, int index) 1010 { 1011 outb(index, dev->cir_addr + IT8709_RAM_IDX); 1012 return inb(dev->cir_addr + IT8709_RAM_VAL); 1013 } 1014 1015 /* write a byte to the SRAM module */ 1016 static inline void it8709_wm(struct ite_dev *dev, u8 val, int index) 1017 { 1018 outb(index, dev->cir_addr + IT8709_RAM_IDX); 1019 outb(val, dev->cir_addr + IT8709_RAM_VAL); 1020 } 1021 1022 static void it8709_wait(struct ite_dev *dev) 1023 { 1024 int i = 0; 1025 /* 1026 * loop until device tells it's ready to continue 1027 * iterations count is usually ~750 but can sometimes achieve 13000 1028 */ 1029 for (i = 0; i < 15000; i++) { 1030 udelay(2); 1031 if (it8709_rm(dev, IT8709_MODE) == IT8709_IDLE) 1032 break; 1033 } 1034 } 1035 1036 /* read the value of a CIR register */ 1037 static u8 it8709_rr(struct ite_dev *dev, int index) 1038 { 1039 /* just wait in case the previous access was a write */ 1040 it8709_wait(dev); 1041 it8709_wm(dev, index, IT8709_REG_IDX); 1042 it8709_wm(dev, IT8709_READ, IT8709_MODE); 1043 1044 /* wait for the read data to be available */ 1045 it8709_wait(dev); 1046 1047 /* return the read value */ 1048 return it8709_rm(dev, IT8709_REG_VAL); 1049 } 1050 1051 /* write the value of a CIR register */ 1052 static void it8709_wr(struct ite_dev *dev, u8 val, int index) 1053 { 1054 /* we wait before writing, and not afterwards, since this allows us to 1055 * pipeline the host CPU with the microcontroller */ 1056 it8709_wait(dev); 1057 it8709_wm(dev, val, IT8709_REG_VAL); 1058 it8709_wm(dev, index, IT8709_REG_IDX); 1059 it8709_wm(dev, IT8709_WRITE, IT8709_MODE); 1060 } 1061 1062 /* retrieve a bitmask of the current causes for a pending interrupt; this may 1063 * be composed of ITE_IRQ_TX_FIFO, ITE_IRQ_RX_FIFO and ITE_IRQ_RX_FIFO_OVERRUN 1064 * */ 1065 static int it8709_get_irq_causes(struct ite_dev *dev) 1066 { 1067 u8 iflags; 1068 int ret = 0; 1069 1070 ite_dbg("%s called", __func__); 1071 1072 /* read the interrupt flags */ 1073 iflags = it8709_rm(dev, IT8709_IIR); 1074 1075 if (iflags & IT85_TLDLI) 1076 ret |= ITE_IRQ_TX_FIFO; 1077 if (iflags & IT85_RDAI) 1078 ret |= ITE_IRQ_RX_FIFO; 1079 if (iflags & IT85_RFOI) 1080 ret |= ITE_IRQ_RX_FIFO_OVERRUN; 1081 1082 return ret; 1083 } 1084 1085 /* set the carrier parameters; to be called with the spinlock held */ 1086 static void it8709_set_carrier_params(struct ite_dev *dev, bool high_freq, 1087 bool use_demodulator, 1088 u8 carrier_freq_bits, u8 allowance_bits, 1089 u8 pulse_width_bits) 1090 { 1091 u8 val; 1092 1093 ite_dbg("%s called", __func__); 1094 1095 val = (it8709_rr(dev, IT85_C0CFR) 1096 &~(IT85_HCFS | IT85_CFQ)) | 1097 carrier_freq_bits; 1098 1099 if (high_freq) 1100 val |= IT85_HCFS; 1101 1102 it8709_wr(dev, val, IT85_C0CFR); 1103 1104 /* program the C0RCR register */ 1105 val = it8709_rr(dev, IT85_C0RCR) 1106 & ~(IT85_RXEND | IT85_RXDCR); 1107 1108 if (use_demodulator) 1109 val |= IT85_RXEND; 1110 1111 val |= allowance_bits; 1112 1113 it8709_wr(dev, val, IT85_C0RCR); 1114 1115 /* program the C0TCR register */ 1116 val = it8709_rr(dev, IT85_C0TCR) & ~IT85_TXMPW; 1117 val |= pulse_width_bits; 1118 it8709_wr(dev, val, IT85_C0TCR); 1119 } 1120 1121 /* read up to buf_size bytes from the RX FIFO; to be called with the spinlock 1122 * held */ 1123 static int it8709_get_rx_bytes(struct ite_dev *dev, u8 * buf, int buf_size) 1124 { 1125 int fifo, read = 0; 1126 1127 ite_dbg("%s called", __func__); 1128 1129 /* read how many bytes are still in the FIFO */ 1130 fifo = it8709_rm(dev, IT8709_RFSR) & IT85_RXFBC; 1131 1132 while (fifo > 0 && buf_size > 0) { 1133 *(buf++) = it8709_rm(dev, IT8709_FIFO + read); 1134 fifo--; 1135 read++; 1136 buf_size--; 1137 } 1138 1139 /* 'clear' the FIFO by setting the writing index to 0; this is 1140 * completely bound to be racy, but we can't help it, since it's a 1141 * limitation of the protocol */ 1142 it8709_wm(dev, 0, IT8709_RFSR); 1143 1144 return read; 1145 } 1146 1147 /* return how many bytes are still in the FIFO; this will be called 1148 * with the device spinlock NOT HELD while waiting for the TX FIFO to get 1149 * empty; let's expect this won't be a problem */ 1150 static int it8709_get_tx_used_slots(struct ite_dev *dev) 1151 { 1152 ite_dbg("%s called", __func__); 1153 1154 return it8709_rr(dev, IT85_C0TFSR) & IT85_TXFBC; 1155 } 1156 1157 /* put a byte to the TX fifo; this should be called with the spinlock held */ 1158 static void it8709_put_tx_byte(struct ite_dev *dev, u8 value) 1159 { 1160 it8709_wr(dev, value, IT85_C0DR); 1161 } 1162 1163 /* idle the receiver so that we won't receive samples until another 1164 pulse is detected; this must be called with the device spinlock held */ 1165 static void it8709_idle_rx(struct ite_dev *dev) 1166 { 1167 ite_dbg("%s called", __func__); 1168 1169 /* disable streaming by clearing RXACT writing it as 1 */ 1170 it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) | IT85_RXACT, 1171 IT85_C0RCR); 1172 1173 /* clear the FIFO */ 1174 it8709_wr(dev, it8709_rr(dev, IT85_C0MSTCR) | IT85_FIFOCLR, 1175 IT85_C0MSTCR); 1176 } 1177 1178 /* disable the receiver; this must be called with the device spinlock held */ 1179 static void it8709_disable_rx(struct ite_dev *dev) 1180 { 1181 ite_dbg("%s called", __func__); 1182 1183 /* disable the receiver interrupts */ 1184 it8709_wr(dev, it8709_rr(dev, IT85_C0IER) & 1185 ~(IT85_RDAIE | IT85_RFOIE), 1186 IT85_C0IER); 1187 1188 /* disable the receiver */ 1189 it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) & ~IT85_RXEN, 1190 IT85_C0RCR); 1191 1192 /* clear the FIFO and RXACT (actually RXACT should have been cleared 1193 * in the previous it8709_wr(dev, ) call) */ 1194 it8709_idle_rx(dev); 1195 } 1196 1197 /* enable the receiver; this must be called with the device spinlock held */ 1198 static void it8709_enable_rx(struct ite_dev *dev) 1199 { 1200 ite_dbg("%s called", __func__); 1201 1202 /* enable the receiver by setting RXEN */ 1203 it8709_wr(dev, it8709_rr(dev, IT85_C0RCR) | IT85_RXEN, 1204 IT85_C0RCR); 1205 1206 /* just prepare it to idle for the next reception */ 1207 it8709_idle_rx(dev); 1208 1209 /* enable the receiver interrupts and master enable flag */ 1210 it8709_wr(dev, it8709_rr(dev, IT85_C0IER) 1211 |IT85_RDAIE | IT85_RFOIE | IT85_IEC, 1212 IT85_C0IER); 1213 } 1214 1215 /* disable the transmitter interrupt; this must be called with the device 1216 * spinlock held */ 1217 static void it8709_disable_tx_interrupt(struct ite_dev *dev) 1218 { 1219 ite_dbg("%s called", __func__); 1220 1221 /* disable the transmitter interrupts */ 1222 it8709_wr(dev, it8709_rr(dev, IT85_C0IER) & ~IT85_TLDLIE, 1223 IT85_C0IER); 1224 } 1225 1226 /* enable the transmitter interrupt; this must be called with the device 1227 * spinlock held */ 1228 static void it8709_enable_tx_interrupt(struct ite_dev *dev) 1229 { 1230 ite_dbg("%s called", __func__); 1231 1232 /* enable the transmitter interrupts and master enable flag */ 1233 it8709_wr(dev, it8709_rr(dev, IT85_C0IER) 1234 |IT85_TLDLIE | IT85_IEC, 1235 IT85_C0IER); 1236 } 1237 1238 /* disable the device; this must be called with the device spinlock held */ 1239 static void it8709_disable(struct ite_dev *dev) 1240 { 1241 ite_dbg("%s called", __func__); 1242 1243 /* clear out all interrupt enable flags */ 1244 it8709_wr(dev, it8709_rr(dev, IT85_C0IER) & 1245 ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE), 1246 IT85_C0IER); 1247 1248 /* disable the receiver */ 1249 it8709_disable_rx(dev); 1250 1251 /* erase the FIFO */ 1252 it8709_wr(dev, IT85_FIFOCLR | it8709_rr(dev, IT85_C0MSTCR), 1253 IT85_C0MSTCR); 1254 } 1255 1256 /* initialize the hardware */ 1257 static void it8709_init_hardware(struct ite_dev *dev) 1258 { 1259 ite_dbg("%s called", __func__); 1260 1261 /* disable all the interrupts */ 1262 it8709_wr(dev, it8709_rr(dev, IT85_C0IER) & 1263 ~(IT85_IEC | IT85_RFOIE | IT85_RDAIE | IT85_TLDLIE), 1264 IT85_C0IER); 1265 1266 /* program the baud rate divisor */ 1267 it8709_wr(dev, ITE_BAUDRATE_DIVISOR & 0xff, IT85_C0BDLR); 1268 it8709_wr(dev, (ITE_BAUDRATE_DIVISOR >> 8) & 0xff, 1269 IT85_C0BDHR); 1270 1271 /* program the C0MSTCR register defaults */ 1272 it8709_wr(dev, (it8709_rr(dev, IT85_C0MSTCR) & 1273 ~(IT85_ILSEL | IT85_ILE | IT85_FIFOTL 1274 | IT85_FIFOCLR | IT85_RESET)) | IT85_FIFOTL_DEFAULT, 1275 IT85_C0MSTCR); 1276 1277 /* program the C0RCR register defaults */ 1278 it8709_wr(dev, (it8709_rr(dev, IT85_C0RCR) & 1279 ~(IT85_RXEN | IT85_RDWOS | IT85_RXEND | IT85_RXACT 1280 | IT85_RXDCR)) | ITE_RXDCR_DEFAULT, 1281 IT85_C0RCR); 1282 1283 /* program the C0TCR register defaults */ 1284 it8709_wr(dev, (it8709_rr(dev, IT85_C0TCR) & ~(IT85_TXMPM | IT85_TXMPW)) 1285 | IT85_TXRLE | IT85_TXENDF | IT85_TXMPM_DEFAULT 1286 | IT85_TXMPW_DEFAULT, 1287 IT85_C0TCR); 1288 1289 /* program the carrier parameters */ 1290 ite_set_carrier_params(dev); 1291 } 1292 1293 1294 /* generic hardware setup/teardown code */ 1295 1296 /* activate the device for use */ 1297 static int ite_open(struct rc_dev *rcdev) 1298 { 1299 struct ite_dev *dev = rcdev->priv; 1300 unsigned long flags; 1301 1302 ite_dbg("%s called", __func__); 1303 1304 spin_lock_irqsave(&dev->lock, flags); 1305 dev->in_use = true; 1306 1307 /* enable the receiver */ 1308 dev->params.enable_rx(dev); 1309 1310 spin_unlock_irqrestore(&dev->lock, flags); 1311 1312 return 0; 1313 } 1314 1315 /* deactivate the device for use */ 1316 static void ite_close(struct rc_dev *rcdev) 1317 { 1318 struct ite_dev *dev = rcdev->priv; 1319 unsigned long flags; 1320 1321 ite_dbg("%s called", __func__); 1322 1323 spin_lock_irqsave(&dev->lock, flags); 1324 dev->in_use = false; 1325 1326 /* wait for any transmission to end */ 1327 spin_unlock_irqrestore(&dev->lock, flags); 1328 wait_event_interruptible(dev->tx_ended, !dev->transmitting); 1329 spin_lock_irqsave(&dev->lock, flags); 1330 1331 dev->params.disable(dev); 1332 1333 spin_unlock_irqrestore(&dev->lock, flags); 1334 } 1335 1336 /* supported models and their parameters */ 1337 static const struct ite_dev_params ite_dev_descs[] = { 1338 { /* 0: ITE8704 */ 1339 .model = "ITE8704 CIR transceiver", 1340 .io_region_size = IT87_IOREG_LENGTH, 1341 .io_rsrc_no = 0, 1342 .hw_tx_capable = true, 1343 .sample_period = (u32) (1000000000ULL / 115200), 1344 .tx_carrier_freq = 38000, 1345 .tx_duty_cycle = 33, 1346 .rx_low_carrier_freq = 0, 1347 .rx_high_carrier_freq = 0, 1348 1349 /* operations */ 1350 .get_irq_causes = it87_get_irq_causes, 1351 .enable_rx = it87_enable_rx, 1352 .idle_rx = it87_idle_rx, 1353 .disable_rx = it87_idle_rx, 1354 .get_rx_bytes = it87_get_rx_bytes, 1355 .enable_tx_interrupt = it87_enable_tx_interrupt, 1356 .disable_tx_interrupt = it87_disable_tx_interrupt, 1357 .get_tx_used_slots = it87_get_tx_used_slots, 1358 .put_tx_byte = it87_put_tx_byte, 1359 .disable = it87_disable, 1360 .init_hardware = it87_init_hardware, 1361 .set_carrier_params = it87_set_carrier_params, 1362 }, 1363 { /* 1: ITE8713 */ 1364 .model = "ITE8713 CIR transceiver", 1365 .io_region_size = IT87_IOREG_LENGTH, 1366 .io_rsrc_no = 0, 1367 .hw_tx_capable = true, 1368 .sample_period = (u32) (1000000000ULL / 115200), 1369 .tx_carrier_freq = 38000, 1370 .tx_duty_cycle = 33, 1371 .rx_low_carrier_freq = 0, 1372 .rx_high_carrier_freq = 0, 1373 1374 /* operations */ 1375 .get_irq_causes = it87_get_irq_causes, 1376 .enable_rx = it87_enable_rx, 1377 .idle_rx = it87_idle_rx, 1378 .disable_rx = it87_idle_rx, 1379 .get_rx_bytes = it87_get_rx_bytes, 1380 .enable_tx_interrupt = it87_enable_tx_interrupt, 1381 .disable_tx_interrupt = it87_disable_tx_interrupt, 1382 .get_tx_used_slots = it87_get_tx_used_slots, 1383 .put_tx_byte = it87_put_tx_byte, 1384 .disable = it87_disable, 1385 .init_hardware = it87_init_hardware, 1386 .set_carrier_params = it87_set_carrier_params, 1387 }, 1388 { /* 2: ITE8708 */ 1389 .model = "ITE8708 CIR transceiver", 1390 .io_region_size = IT8708_IOREG_LENGTH, 1391 .io_rsrc_no = 0, 1392 .hw_tx_capable = true, 1393 .sample_period = (u32) (1000000000ULL / 115200), 1394 .tx_carrier_freq = 38000, 1395 .tx_duty_cycle = 33, 1396 .rx_low_carrier_freq = 0, 1397 .rx_high_carrier_freq = 0, 1398 1399 /* operations */ 1400 .get_irq_causes = it8708_get_irq_causes, 1401 .enable_rx = it8708_enable_rx, 1402 .idle_rx = it8708_idle_rx, 1403 .disable_rx = it8708_idle_rx, 1404 .get_rx_bytes = it8708_get_rx_bytes, 1405 .enable_tx_interrupt = it8708_enable_tx_interrupt, 1406 .disable_tx_interrupt = 1407 it8708_disable_tx_interrupt, 1408 .get_tx_used_slots = it8708_get_tx_used_slots, 1409 .put_tx_byte = it8708_put_tx_byte, 1410 .disable = it8708_disable, 1411 .init_hardware = it8708_init_hardware, 1412 .set_carrier_params = it8708_set_carrier_params, 1413 }, 1414 { /* 3: ITE8709 */ 1415 .model = "ITE8709 CIR transceiver", 1416 .io_region_size = IT8709_IOREG_LENGTH, 1417 .io_rsrc_no = 2, 1418 .hw_tx_capable = true, 1419 .sample_period = (u32) (1000000000ULL / 115200), 1420 .tx_carrier_freq = 38000, 1421 .tx_duty_cycle = 33, 1422 .rx_low_carrier_freq = 0, 1423 .rx_high_carrier_freq = 0, 1424 1425 /* operations */ 1426 .get_irq_causes = it8709_get_irq_causes, 1427 .enable_rx = it8709_enable_rx, 1428 .idle_rx = it8709_idle_rx, 1429 .disable_rx = it8709_idle_rx, 1430 .get_rx_bytes = it8709_get_rx_bytes, 1431 .enable_tx_interrupt = it8709_enable_tx_interrupt, 1432 .disable_tx_interrupt = 1433 it8709_disable_tx_interrupt, 1434 .get_tx_used_slots = it8709_get_tx_used_slots, 1435 .put_tx_byte = it8709_put_tx_byte, 1436 .disable = it8709_disable, 1437 .init_hardware = it8709_init_hardware, 1438 .set_carrier_params = it8709_set_carrier_params, 1439 }, 1440 }; 1441 1442 static const struct pnp_device_id ite_ids[] = { 1443 {"ITE8704", 0}, /* Default model */ 1444 {"ITE8713", 1}, /* CIR found in EEEBox 1501U */ 1445 {"ITE8708", 2}, /* Bridged IT8512 */ 1446 {"ITE8709", 3}, /* SRAM-Bridged IT8512 */ 1447 {"", 0}, 1448 }; 1449 1450 /* allocate memory, probe hardware, and initialize everything */ 1451 static int ite_probe(struct pnp_dev *pdev, const struct pnp_device_id 1452 *dev_id) 1453 { 1454 const struct ite_dev_params *dev_desc = NULL; 1455 struct ite_dev *itdev = NULL; 1456 struct rc_dev *rdev = NULL; 1457 int ret = -ENOMEM; 1458 int model_no; 1459 int io_rsrc_no; 1460 1461 ite_dbg("%s called", __func__); 1462 1463 itdev = kzalloc(sizeof(struct ite_dev), GFP_KERNEL); 1464 if (!itdev) 1465 return ret; 1466 1467 /* input device for IR remote (and tx) */ 1468 rdev = rc_allocate_device(RC_DRIVER_IR_RAW); 1469 if (!rdev) 1470 goto exit_free_dev_rdev; 1471 itdev->rdev = rdev; 1472 1473 ret = -ENODEV; 1474 1475 /* get the model number */ 1476 model_no = (int)dev_id->driver_data; 1477 ite_pr(KERN_NOTICE, "Auto-detected model: %s\n", 1478 ite_dev_descs[model_no].model); 1479 1480 if (model_number >= 0 && model_number < ARRAY_SIZE(ite_dev_descs)) { 1481 model_no = model_number; 1482 ite_pr(KERN_NOTICE, "The model has been fixed by a module parameter."); 1483 } 1484 1485 ite_pr(KERN_NOTICE, "Using model: %s\n", ite_dev_descs[model_no].model); 1486 1487 /* get the description for the device */ 1488 dev_desc = &ite_dev_descs[model_no]; 1489 io_rsrc_no = dev_desc->io_rsrc_no; 1490 1491 /* validate pnp resources */ 1492 if (!pnp_port_valid(pdev, io_rsrc_no) || 1493 pnp_port_len(pdev, io_rsrc_no) != dev_desc->io_region_size) { 1494 dev_err(&pdev->dev, "IR PNP Port not valid!\n"); 1495 goto exit_free_dev_rdev; 1496 } 1497 1498 if (!pnp_irq_valid(pdev, 0)) { 1499 dev_err(&pdev->dev, "PNP IRQ not valid!\n"); 1500 goto exit_free_dev_rdev; 1501 } 1502 1503 /* store resource values */ 1504 itdev->cir_addr = pnp_port_start(pdev, io_rsrc_no); 1505 itdev->cir_irq = pnp_irq(pdev, 0); 1506 1507 /* initialize spinlocks */ 1508 spin_lock_init(&itdev->lock); 1509 1510 /* initialize raw event */ 1511 init_ir_raw_event(&itdev->rawir); 1512 1513 /* set driver data into the pnp device */ 1514 pnp_set_drvdata(pdev, itdev); 1515 itdev->pdev = pdev; 1516 1517 /* initialize waitqueues for transmission */ 1518 init_waitqueue_head(&itdev->tx_queue); 1519 init_waitqueue_head(&itdev->tx_ended); 1520 1521 /* copy model-specific parameters */ 1522 itdev->params = *dev_desc; 1523 1524 /* apply any overrides */ 1525 if (sample_period > 0) 1526 itdev->params.sample_period = sample_period; 1527 1528 if (tx_carrier_freq > 0) 1529 itdev->params.tx_carrier_freq = tx_carrier_freq; 1530 1531 if (tx_duty_cycle > 0 && tx_duty_cycle <= 100) 1532 itdev->params.tx_duty_cycle = tx_duty_cycle; 1533 1534 if (rx_low_carrier_freq > 0) 1535 itdev->params.rx_low_carrier_freq = rx_low_carrier_freq; 1536 1537 if (rx_high_carrier_freq > 0) 1538 itdev->params.rx_high_carrier_freq = rx_high_carrier_freq; 1539 1540 /* print out parameters */ 1541 ite_pr(KERN_NOTICE, "TX-capable: %d\n", (int) 1542 itdev->params.hw_tx_capable); 1543 ite_pr(KERN_NOTICE, "Sample period (ns): %ld\n", (long) 1544 itdev->params.sample_period); 1545 ite_pr(KERN_NOTICE, "TX carrier frequency (Hz): %d\n", (int) 1546 itdev->params.tx_carrier_freq); 1547 ite_pr(KERN_NOTICE, "TX duty cycle (%%): %d\n", (int) 1548 itdev->params.tx_duty_cycle); 1549 ite_pr(KERN_NOTICE, "RX low carrier frequency (Hz): %d\n", (int) 1550 itdev->params.rx_low_carrier_freq); 1551 ite_pr(KERN_NOTICE, "RX high carrier frequency (Hz): %d\n", (int) 1552 itdev->params.rx_high_carrier_freq); 1553 1554 /* set up hardware initial state */ 1555 itdev->params.init_hardware(itdev); 1556 1557 /* set up ir-core props */ 1558 rdev->priv = itdev; 1559 rdev->allowed_protocols = RC_PROTO_BIT_ALL_IR_DECODER; 1560 rdev->open = ite_open; 1561 rdev->close = ite_close; 1562 rdev->s_idle = ite_s_idle; 1563 rdev->s_rx_carrier_range = ite_set_rx_carrier_range; 1564 rdev->min_timeout = ITE_MIN_IDLE_TIMEOUT; 1565 rdev->max_timeout = ITE_MAX_IDLE_TIMEOUT; 1566 rdev->timeout = ITE_IDLE_TIMEOUT; 1567 rdev->rx_resolution = ITE_BAUDRATE_DIVISOR * 1568 itdev->params.sample_period; 1569 rdev->tx_resolution = ITE_BAUDRATE_DIVISOR * 1570 itdev->params.sample_period; 1571 1572 /* set up transmitter related values if needed */ 1573 if (itdev->params.hw_tx_capable) { 1574 rdev->tx_ir = ite_tx_ir; 1575 rdev->s_tx_carrier = ite_set_tx_carrier; 1576 rdev->s_tx_duty_cycle = ite_set_tx_duty_cycle; 1577 } 1578 1579 rdev->device_name = dev_desc->model; 1580 rdev->input_id.bustype = BUS_HOST; 1581 rdev->input_id.vendor = PCI_VENDOR_ID_ITE; 1582 rdev->input_id.product = 0; 1583 rdev->input_id.version = 0; 1584 rdev->driver_name = ITE_DRIVER_NAME; 1585 rdev->map_name = RC_MAP_RC6_MCE; 1586 1587 ret = rc_register_device(rdev); 1588 if (ret) 1589 goto exit_free_dev_rdev; 1590 1591 ret = -EBUSY; 1592 /* now claim resources */ 1593 if (!request_region(itdev->cir_addr, 1594 dev_desc->io_region_size, ITE_DRIVER_NAME)) 1595 goto exit_unregister_device; 1596 1597 if (request_irq(itdev->cir_irq, ite_cir_isr, IRQF_SHARED, 1598 ITE_DRIVER_NAME, (void *)itdev)) 1599 goto exit_release_cir_addr; 1600 1601 ite_pr(KERN_NOTICE, "driver has been successfully loaded\n"); 1602 1603 return 0; 1604 1605 exit_release_cir_addr: 1606 release_region(itdev->cir_addr, itdev->params.io_region_size); 1607 exit_unregister_device: 1608 rc_unregister_device(rdev); 1609 rdev = NULL; 1610 exit_free_dev_rdev: 1611 rc_free_device(rdev); 1612 kfree(itdev); 1613 1614 return ret; 1615 } 1616 1617 static void ite_remove(struct pnp_dev *pdev) 1618 { 1619 struct ite_dev *dev = pnp_get_drvdata(pdev); 1620 unsigned long flags; 1621 1622 ite_dbg("%s called", __func__); 1623 1624 spin_lock_irqsave(&dev->lock, flags); 1625 1626 /* disable hardware */ 1627 dev->params.disable(dev); 1628 1629 spin_unlock_irqrestore(&dev->lock, flags); 1630 1631 /* free resources */ 1632 free_irq(dev->cir_irq, dev); 1633 release_region(dev->cir_addr, dev->params.io_region_size); 1634 1635 rc_unregister_device(dev->rdev); 1636 1637 kfree(dev); 1638 } 1639 1640 static int ite_suspend(struct pnp_dev *pdev, pm_message_t state) 1641 { 1642 struct ite_dev *dev = pnp_get_drvdata(pdev); 1643 unsigned long flags; 1644 1645 ite_dbg("%s called", __func__); 1646 1647 /* wait for any transmission to end */ 1648 wait_event_interruptible(dev->tx_ended, !dev->transmitting); 1649 1650 spin_lock_irqsave(&dev->lock, flags); 1651 1652 /* disable all interrupts */ 1653 dev->params.disable(dev); 1654 1655 spin_unlock_irqrestore(&dev->lock, flags); 1656 1657 return 0; 1658 } 1659 1660 static int ite_resume(struct pnp_dev *pdev) 1661 { 1662 struct ite_dev *dev = pnp_get_drvdata(pdev); 1663 unsigned long flags; 1664 1665 ite_dbg("%s called", __func__); 1666 1667 spin_lock_irqsave(&dev->lock, flags); 1668 1669 /* reinitialize hardware config registers */ 1670 dev->params.init_hardware(dev); 1671 /* enable the receiver */ 1672 dev->params.enable_rx(dev); 1673 1674 spin_unlock_irqrestore(&dev->lock, flags); 1675 1676 return 0; 1677 } 1678 1679 static void ite_shutdown(struct pnp_dev *pdev) 1680 { 1681 struct ite_dev *dev = pnp_get_drvdata(pdev); 1682 unsigned long flags; 1683 1684 ite_dbg("%s called", __func__); 1685 1686 spin_lock_irqsave(&dev->lock, flags); 1687 1688 /* disable all interrupts */ 1689 dev->params.disable(dev); 1690 1691 spin_unlock_irqrestore(&dev->lock, flags); 1692 } 1693 1694 static struct pnp_driver ite_driver = { 1695 .name = ITE_DRIVER_NAME, 1696 .id_table = ite_ids, 1697 .probe = ite_probe, 1698 .remove = ite_remove, 1699 .suspend = ite_suspend, 1700 .resume = ite_resume, 1701 .shutdown = ite_shutdown, 1702 }; 1703 1704 MODULE_DEVICE_TABLE(pnp, ite_ids); 1705 MODULE_DESCRIPTION("ITE Tech Inc. IT8712F/ITE8512F CIR driver"); 1706 1707 MODULE_AUTHOR("Juan J. Garcia de Soria <skandalfo@gmail.com>"); 1708 MODULE_LICENSE("GPL"); 1709 1710 module_pnp_driver(ite_driver); 1711