1 /* 2 * USB ATI Remote support 3 * 4 * Copyright (c) 2011, 2012 Anssi Hannula <anssi.hannula@iki.fi> 5 * Version 2.2.0 Copyright (c) 2004 Torrey Hoffman <thoffman@arnor.net> 6 * Version 2.1.1 Copyright (c) 2002 Vladimir Dergachev 7 * 8 * This 2.2.0 version is a rewrite / cleanup of the 2.1.1 driver, including 9 * porting to the 2.6 kernel interfaces, along with other modification 10 * to better match the style of the existing usb/input drivers. However, the 11 * protocol and hardware handling is essentially unchanged from 2.1.1. 12 * 13 * The 2.1.1 driver was derived from the usbati_remote and usbkbd drivers by 14 * Vojtech Pavlik. 15 * 16 * Changes: 17 * 18 * Feb 2004: Torrey Hoffman <thoffman@arnor.net> 19 * Version 2.2.0 20 * Jun 2004: Torrey Hoffman <thoffman@arnor.net> 21 * Version 2.2.1 22 * Added key repeat support contributed by: 23 * Vincent Vanackere <vanackere@lif.univ-mrs.fr> 24 * Added support for the "Lola" remote contributed by: 25 * Seth Cohn <sethcohn@yahoo.com> 26 * 27 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 28 * 29 * This program is free software; you can redistribute it and/or modify 30 * it under the terms of the GNU General Public License as published by 31 * the Free Software Foundation; either version 2 of the License, or 32 * (at your option) any later version. 33 * 34 * This program is distributed in the hope that it will be useful, 35 * but WITHOUT ANY WARRANTY; without even the implied warranty of 36 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 37 * GNU General Public License for more details. 38 * 39 * You should have received a copy of the GNU General Public License 40 * along with this program; if not, write to the Free Software 41 * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA 42 * 43 * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * 44 * 45 * Hardware & software notes 46 * 47 * These remote controls are distributed by ATI as part of their 48 * "All-In-Wonder" video card packages. The receiver self-identifies as a 49 * "USB Receiver" with manufacturer "X10 Wireless Technology Inc". 50 * 51 * The "Lola" remote is available from X10. See: 52 * http://www.x10.com/products/lola_sg1.htm 53 * The Lola is similar to the ATI remote but has no mouse support, and slightly 54 * different keys. 55 * 56 * It is possible to use multiple receivers and remotes on multiple computers 57 * simultaneously by configuring them to use specific channels. 58 * 59 * The RF protocol used by the remote supports 16 distinct channels, 1 to 16. 60 * Actually, it may even support more, at least in some revisions of the 61 * hardware. 62 * 63 * Each remote can be configured to transmit on one channel as follows: 64 * - Press and hold the "hand icon" button. 65 * - When the red LED starts to blink, let go of the "hand icon" button. 66 * - When it stops blinking, input the channel code as two digits, from 01 67 * to 16, and press the hand icon again. 68 * 69 * The timing can be a little tricky. Try loading the module with debug=1 70 * to have the kernel print out messages about the remote control number 71 * and mask. Note: debugging prints remote numbers as zero-based hexadecimal. 72 * 73 * The driver has a "channel_mask" parameter. This bitmask specifies which 74 * channels will be ignored by the module. To mask out channels, just add 75 * all the 2^channel_number values together. 76 * 77 * For instance, set channel_mask = 2^4 = 16 (binary 10000) to make ati_remote 78 * ignore signals coming from remote controls transmitting on channel 4, but 79 * accept all other channels. 80 * 81 * Or, set channel_mask = 65533, (0xFFFD), and all channels except 1 will be 82 * ignored. 83 * 84 * The default is 0 (respond to all channels). Bit 0 and bits 17-32 of this 85 * parameter are unused. 86 * 87 */ 88 89 #include <linux/kernel.h> 90 #include <linux/errno.h> 91 #include <linux/init.h> 92 #include <linux/slab.h> 93 #include <linux/module.h> 94 #include <linux/mutex.h> 95 #include <linux/usb/input.h> 96 #include <linux/wait.h> 97 #include <linux/jiffies.h> 98 #include <media/rc-core.h> 99 100 /* 101 * Module and Version Information, Module Parameters 102 */ 103 104 #define ATI_REMOTE_VENDOR_ID 0x0bc7 105 #define LOLA_REMOTE_PRODUCT_ID 0x0002 106 #define LOLA2_REMOTE_PRODUCT_ID 0x0003 107 #define ATI_REMOTE_PRODUCT_ID 0x0004 108 #define NVIDIA_REMOTE_PRODUCT_ID 0x0005 109 #define MEDION_REMOTE_PRODUCT_ID 0x0006 110 #define FIREFLY_REMOTE_PRODUCT_ID 0x0008 111 112 #define DRIVER_VERSION "2.2.1" 113 #define DRIVER_AUTHOR "Torrey Hoffman <thoffman@arnor.net>" 114 #define DRIVER_DESC "ATI/X10 RF USB Remote Control" 115 116 #define NAME_BUFSIZE 80 /* size of product name, path buffers */ 117 #define DATA_BUFSIZE 63 /* size of URB data buffers */ 118 119 /* 120 * Duplicate event filtering time. 121 * Sequential, identical KIND_FILTERED inputs with less than 122 * FILTER_TIME milliseconds between them are considered as repeat 123 * events. The hardware generates 5 events for the first keypress 124 * and we have to take this into account for an accurate repeat 125 * behaviour. 126 */ 127 #define FILTER_TIME 60 /* msec */ 128 #define REPEAT_DELAY 500 /* msec */ 129 130 static unsigned long channel_mask; 131 module_param(channel_mask, ulong, 0644); 132 MODULE_PARM_DESC(channel_mask, "Bitmask of remote control channels to ignore"); 133 134 static int debug; 135 module_param(debug, int, 0644); 136 MODULE_PARM_DESC(debug, "Enable extra debug messages and information"); 137 138 static int repeat_filter = FILTER_TIME; 139 module_param(repeat_filter, int, 0644); 140 MODULE_PARM_DESC(repeat_filter, "Repeat filter time, default = 60 msec"); 141 142 static int repeat_delay = REPEAT_DELAY; 143 module_param(repeat_delay, int, 0644); 144 MODULE_PARM_DESC(repeat_delay, "Delay before sending repeats, default = 500 msec"); 145 146 static bool mouse = true; 147 module_param(mouse, bool, 0444); 148 MODULE_PARM_DESC(mouse, "Enable mouse device, default = yes"); 149 150 #define dbginfo(dev, format, arg...) \ 151 do { if (debug) dev_info(dev , format , ## arg); } while (0) 152 #undef err 153 #define err(format, arg...) printk(KERN_ERR format , ## arg) 154 155 struct ati_receiver_type { 156 /* either default_keymap or get_default_keymap should be set */ 157 const char *default_keymap; 158 const char *(*get_default_keymap)(struct usb_interface *interface); 159 }; 160 161 static const char *get_medion_keymap(struct usb_interface *interface) 162 { 163 struct usb_device *udev = interface_to_usbdev(interface); 164 165 /* 166 * There are many different Medion remotes shipped with a receiver 167 * with the same usb id, but the receivers have subtle differences 168 * in the USB descriptors allowing us to detect them. 169 */ 170 171 if (udev->manufacturer && udev->product) { 172 if (udev->actconfig->desc.bmAttributes & USB_CONFIG_ATT_WAKEUP) { 173 174 if (!strcmp(udev->manufacturer, "X10 Wireless Technology Inc") 175 && !strcmp(udev->product, "USB Receiver")) 176 return RC_MAP_MEDION_X10_DIGITAINER; 177 178 if (!strcmp(udev->manufacturer, "X10 WTI") 179 && !strcmp(udev->product, "RF receiver")) 180 return RC_MAP_MEDION_X10_OR2X; 181 } else { 182 183 if (!strcmp(udev->manufacturer, "X10 Wireless Technology Inc") 184 && !strcmp(udev->product, "USB Receiver")) 185 return RC_MAP_MEDION_X10; 186 } 187 } 188 189 dev_info(&interface->dev, 190 "Unknown Medion X10 receiver, using default ati_remote Medion keymap\n"); 191 192 return RC_MAP_MEDION_X10; 193 } 194 195 static const struct ati_receiver_type type_ati = { 196 .default_keymap = RC_MAP_ATI_X10 197 }; 198 static const struct ati_receiver_type type_medion = { 199 .get_default_keymap = get_medion_keymap 200 }; 201 static const struct ati_receiver_type type_firefly = { 202 .default_keymap = RC_MAP_SNAPSTREAM_FIREFLY 203 }; 204 205 static struct usb_device_id ati_remote_table[] = { 206 { 207 USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA_REMOTE_PRODUCT_ID), 208 .driver_info = (unsigned long)&type_ati 209 }, 210 { 211 USB_DEVICE(ATI_REMOTE_VENDOR_ID, LOLA2_REMOTE_PRODUCT_ID), 212 .driver_info = (unsigned long)&type_ati 213 }, 214 { 215 USB_DEVICE(ATI_REMOTE_VENDOR_ID, ATI_REMOTE_PRODUCT_ID), 216 .driver_info = (unsigned long)&type_ati 217 }, 218 { 219 USB_DEVICE(ATI_REMOTE_VENDOR_ID, NVIDIA_REMOTE_PRODUCT_ID), 220 .driver_info = (unsigned long)&type_ati 221 }, 222 { 223 USB_DEVICE(ATI_REMOTE_VENDOR_ID, MEDION_REMOTE_PRODUCT_ID), 224 .driver_info = (unsigned long)&type_medion 225 }, 226 { 227 USB_DEVICE(ATI_REMOTE_VENDOR_ID, FIREFLY_REMOTE_PRODUCT_ID), 228 .driver_info = (unsigned long)&type_firefly 229 }, 230 {} /* Terminating entry */ 231 }; 232 233 MODULE_DEVICE_TABLE(usb, ati_remote_table); 234 235 /* Get hi and low bytes of a 16-bits int */ 236 #define HI(a) ((unsigned char)((a) >> 8)) 237 #define LO(a) ((unsigned char)((a) & 0xff)) 238 239 #define SEND_FLAG_IN_PROGRESS 1 240 #define SEND_FLAG_COMPLETE 2 241 242 /* Device initialization strings */ 243 static char init1[] = { 0x01, 0x00, 0x20, 0x14 }; 244 static char init2[] = { 0x01, 0x00, 0x20, 0x14, 0x20, 0x20, 0x20 }; 245 246 struct ati_remote { 247 struct input_dev *idev; 248 struct rc_dev *rdev; 249 struct usb_device *udev; 250 struct usb_interface *interface; 251 252 struct urb *irq_urb; 253 struct urb *out_urb; 254 struct usb_endpoint_descriptor *endpoint_in; 255 struct usb_endpoint_descriptor *endpoint_out; 256 unsigned char *inbuf; 257 unsigned char *outbuf; 258 dma_addr_t inbuf_dma; 259 dma_addr_t outbuf_dma; 260 261 unsigned char old_data; /* Detect duplicate events */ 262 unsigned long old_jiffies; 263 unsigned long acc_jiffies; /* handle acceleration */ 264 unsigned long first_jiffies; 265 266 unsigned int repeat_count; 267 268 char rc_name[NAME_BUFSIZE]; 269 char rc_phys[NAME_BUFSIZE]; 270 char mouse_name[NAME_BUFSIZE]; 271 char mouse_phys[NAME_BUFSIZE]; 272 273 wait_queue_head_t wait; 274 int send_flags; 275 276 int users; /* 0-2, users are rc and input */ 277 struct mutex open_mutex; 278 }; 279 280 /* "Kinds" of messages sent from the hardware to the driver. */ 281 #define KIND_END 0 282 #define KIND_LITERAL 1 /* Simply pass to input system as EV_KEY */ 283 #define KIND_FILTERED 2 /* Add artificial key-up events, drop keyrepeats */ 284 #define KIND_ACCEL 3 /* Translate to EV_REL mouse-move events */ 285 286 /* Translation table from hardware messages to input events. */ 287 static const struct { 288 unsigned char kind; 289 unsigned char data; /* Raw key code from remote */ 290 unsigned short code; /* Input layer translation */ 291 } ati_remote_tbl[] = { 292 /* Directional control pad axes. Code is xxyy */ 293 {KIND_ACCEL, 0x70, 0xff00}, /* left */ 294 {KIND_ACCEL, 0x71, 0x0100}, /* right */ 295 {KIND_ACCEL, 0x72, 0x00ff}, /* up */ 296 {KIND_ACCEL, 0x73, 0x0001}, /* down */ 297 298 /* Directional control pad diagonals */ 299 {KIND_ACCEL, 0x74, 0xffff}, /* left up */ 300 {KIND_ACCEL, 0x75, 0x01ff}, /* right up */ 301 {KIND_ACCEL, 0x77, 0xff01}, /* left down */ 302 {KIND_ACCEL, 0x76, 0x0101}, /* right down */ 303 304 /* "Mouse button" buttons. The code below uses the fact that the 305 * lsbit of the raw code is a down/up indicator. */ 306 {KIND_LITERAL, 0x78, BTN_LEFT}, /* left btn down */ 307 {KIND_LITERAL, 0x79, BTN_LEFT}, /* left btn up */ 308 {KIND_LITERAL, 0x7c, BTN_RIGHT},/* right btn down */ 309 {KIND_LITERAL, 0x7d, BTN_RIGHT},/* right btn up */ 310 311 /* Artificial "doubleclick" events are generated by the hardware. 312 * They are mapped to the "side" and "extra" mouse buttons here. */ 313 {KIND_FILTERED, 0x7a, BTN_SIDE}, /* left dblclick */ 314 {KIND_FILTERED, 0x7e, BTN_EXTRA},/* right dblclick */ 315 316 /* Non-mouse events are handled by rc-core */ 317 {KIND_END, 0x00, 0} 318 }; 319 320 /* 321 * ati_remote_dump_input 322 */ 323 static void ati_remote_dump(struct device *dev, unsigned char *data, 324 unsigned int len) 325 { 326 if (len == 1) { 327 if (data[0] != (unsigned char)0xff && data[0] != 0x00) 328 dev_warn(dev, "Weird byte 0x%02x\n", data[0]); 329 } else if (len == 4) 330 dev_warn(dev, "Weird key %*ph\n", 4, data); 331 else 332 dev_warn(dev, "Weird data, len=%d %*ph ...\n", len, 6, data); 333 } 334 335 /* 336 * ati_remote_open 337 */ 338 static int ati_remote_open(struct ati_remote *ati_remote) 339 { 340 int err = 0; 341 342 mutex_lock(&ati_remote->open_mutex); 343 344 if (ati_remote->users++ != 0) 345 goto out; /* one was already active */ 346 347 /* On first open, submit the read urb which was set up previously. */ 348 ati_remote->irq_urb->dev = ati_remote->udev; 349 if (usb_submit_urb(ati_remote->irq_urb, GFP_KERNEL)) { 350 dev_err(&ati_remote->interface->dev, 351 "%s: usb_submit_urb failed!\n", __func__); 352 err = -EIO; 353 } 354 355 out: mutex_unlock(&ati_remote->open_mutex); 356 return err; 357 } 358 359 /* 360 * ati_remote_close 361 */ 362 static void ati_remote_close(struct ati_remote *ati_remote) 363 { 364 mutex_lock(&ati_remote->open_mutex); 365 if (--ati_remote->users == 0) 366 usb_kill_urb(ati_remote->irq_urb); 367 mutex_unlock(&ati_remote->open_mutex); 368 } 369 370 static int ati_remote_input_open(struct input_dev *inputdev) 371 { 372 struct ati_remote *ati_remote = input_get_drvdata(inputdev); 373 return ati_remote_open(ati_remote); 374 } 375 376 static void ati_remote_input_close(struct input_dev *inputdev) 377 { 378 struct ati_remote *ati_remote = input_get_drvdata(inputdev); 379 ati_remote_close(ati_remote); 380 } 381 382 static int ati_remote_rc_open(struct rc_dev *rdev) 383 { 384 struct ati_remote *ati_remote = rdev->priv; 385 return ati_remote_open(ati_remote); 386 } 387 388 static void ati_remote_rc_close(struct rc_dev *rdev) 389 { 390 struct ati_remote *ati_remote = rdev->priv; 391 ati_remote_close(ati_remote); 392 } 393 394 /* 395 * ati_remote_irq_out 396 */ 397 static void ati_remote_irq_out(struct urb *urb) 398 { 399 struct ati_remote *ati_remote = urb->context; 400 401 if (urb->status) { 402 dev_dbg(&ati_remote->interface->dev, "%s: status %d\n", 403 __func__, urb->status); 404 return; 405 } 406 407 ati_remote->send_flags |= SEND_FLAG_COMPLETE; 408 wmb(); 409 wake_up(&ati_remote->wait); 410 } 411 412 /* 413 * ati_remote_sendpacket 414 * 415 * Used to send device initialization strings 416 */ 417 static int ati_remote_sendpacket(struct ati_remote *ati_remote, u16 cmd, 418 unsigned char *data) 419 { 420 int retval = 0; 421 422 /* Set up out_urb */ 423 memcpy(ati_remote->out_urb->transfer_buffer + 1, data, LO(cmd)); 424 ((char *) ati_remote->out_urb->transfer_buffer)[0] = HI(cmd); 425 426 ati_remote->out_urb->transfer_buffer_length = LO(cmd) + 1; 427 ati_remote->out_urb->dev = ati_remote->udev; 428 ati_remote->send_flags = SEND_FLAG_IN_PROGRESS; 429 430 retval = usb_submit_urb(ati_remote->out_urb, GFP_ATOMIC); 431 if (retval) { 432 dev_dbg(&ati_remote->interface->dev, 433 "sendpacket: usb_submit_urb failed: %d\n", retval); 434 return retval; 435 } 436 437 wait_event_timeout(ati_remote->wait, 438 ((ati_remote->out_urb->status != -EINPROGRESS) || 439 (ati_remote->send_flags & SEND_FLAG_COMPLETE)), 440 HZ); 441 usb_kill_urb(ati_remote->out_urb); 442 443 return retval; 444 } 445 446 struct accel_times { 447 const char value; 448 unsigned int msecs; 449 }; 450 451 static const struct accel_times accel[] = { 452 { 1, 125 }, 453 { 2, 250 }, 454 { 4, 500 }, 455 { 6, 1000 }, 456 { 9, 1500 }, 457 { 13, 2000 }, 458 { 20, 0 }, 459 }; 460 461 /* 462 * ati_remote_compute_accel 463 * 464 * Implements acceleration curve for directional control pad 465 * If elapsed time since last event is > 1/4 second, user "stopped", 466 * so reset acceleration. Otherwise, user is probably holding the control 467 * pad down, so we increase acceleration, ramping up over two seconds to 468 * a maximum speed. 469 */ 470 static int ati_remote_compute_accel(struct ati_remote *ati_remote) 471 { 472 unsigned long now = jiffies, reset_time; 473 int i; 474 475 reset_time = msecs_to_jiffies(250); 476 477 if (time_after(now, ati_remote->old_jiffies + reset_time)) { 478 ati_remote->acc_jiffies = now; 479 return 1; 480 } 481 for (i = 0; i < ARRAY_SIZE(accel) - 1; i++) { 482 unsigned long timeout = msecs_to_jiffies(accel[i].msecs); 483 484 if (time_before(now, ati_remote->acc_jiffies + timeout)) 485 return accel[i].value; 486 } 487 return accel[i].value; 488 } 489 490 /* 491 * ati_remote_report_input 492 */ 493 static void ati_remote_input_report(struct urb *urb) 494 { 495 struct ati_remote *ati_remote = urb->context; 496 unsigned char *data= ati_remote->inbuf; 497 struct input_dev *dev = ati_remote->idev; 498 int index = -1; 499 int remote_num; 500 unsigned char scancode; 501 u32 wheel_keycode = KEY_RESERVED; 502 int i; 503 504 /* 505 * data[0] = 0x14 506 * data[1] = data[2] + data[3] + 0xd5 (a checksum byte) 507 * data[2] = the key code (with toggle bit in MSB with some models) 508 * data[3] = channel << 4 (the low 4 bits must be zero) 509 */ 510 511 /* Deal with strange looking inputs */ 512 if ( urb->actual_length != 4 || data[0] != 0x14 || 513 data[1] != (unsigned char)(data[2] + data[3] + 0xD5) || 514 (data[3] & 0x0f) != 0x00) { 515 ati_remote_dump(&urb->dev->dev, data, urb->actual_length); 516 return; 517 } 518 519 if (data[1] != ((data[2] + data[3] + 0xd5) & 0xff)) { 520 dbginfo(&ati_remote->interface->dev, 521 "wrong checksum in input: %*ph\n", 4, data); 522 return; 523 } 524 525 /* Mask unwanted remote channels. */ 526 /* note: remote_num is 0-based, channel 1 on remote == 0 here */ 527 remote_num = (data[3] >> 4) & 0x0f; 528 if (channel_mask & (1 << (remote_num + 1))) { 529 dbginfo(&ati_remote->interface->dev, 530 "Masked input from channel 0x%02x: data %02x, mask= 0x%02lx\n", 531 remote_num, data[2], channel_mask); 532 return; 533 } 534 535 /* 536 * MSB is a toggle code, though only used by some devices 537 * (e.g. SnapStream Firefly) 538 */ 539 scancode = data[2] & 0x7f; 540 541 dbginfo(&ati_remote->interface->dev, 542 "channel 0x%02x; key data %02x, scancode %02x\n", 543 remote_num, data[2], scancode); 544 545 if (scancode >= 0x70) { 546 /* 547 * This is either a mouse or scrollwheel event, depending on 548 * the remote/keymap. 549 * Get the keycode assigned to scancode 0x78/0x70. If it is 550 * set, assume this is a scrollwheel up/down event. 551 */ 552 wheel_keycode = rc_g_keycode_from_table(ati_remote->rdev, 553 scancode & 0x78); 554 555 if (wheel_keycode == KEY_RESERVED) { 556 /* scrollwheel was not mapped, assume mouse */ 557 558 /* Look up event code index in the mouse translation 559 * table. 560 */ 561 for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) { 562 if (scancode == ati_remote_tbl[i].data) { 563 index = i; 564 break; 565 } 566 } 567 } 568 } 569 570 if (index >= 0 && ati_remote_tbl[index].kind == KIND_LITERAL) { 571 /* 572 * The lsbit of the raw key code is a down/up flag. 573 * Invert it to match the input layer's conventions. 574 */ 575 input_event(dev, EV_KEY, ati_remote_tbl[index].code, 576 !(data[2] & 1)); 577 578 ati_remote->old_jiffies = jiffies; 579 580 } else if (index < 0 || ati_remote_tbl[index].kind == KIND_FILTERED) { 581 unsigned long now = jiffies; 582 583 /* Filter duplicate events which happen "too close" together. */ 584 if (ati_remote->old_data == data[2] && 585 time_before(now, ati_remote->old_jiffies + 586 msecs_to_jiffies(repeat_filter))) { 587 ati_remote->repeat_count++; 588 } else { 589 ati_remote->repeat_count = 0; 590 ati_remote->first_jiffies = now; 591 } 592 593 ati_remote->old_jiffies = now; 594 595 /* Ensure we skip at least the 4 first duplicate events 596 * (generated by a single keypress), and continue skipping 597 * until repeat_delay msecs have passed. 598 */ 599 if (ati_remote->repeat_count > 0 && 600 (ati_remote->repeat_count < 5 || 601 time_before(now, ati_remote->first_jiffies + 602 msecs_to_jiffies(repeat_delay)))) 603 return; 604 605 if (index >= 0) { 606 input_event(dev, EV_KEY, ati_remote_tbl[index].code, 1); 607 input_event(dev, EV_KEY, ati_remote_tbl[index].code, 0); 608 } else { 609 /* Not a mouse event, hand it to rc-core. */ 610 int count = 1; 611 612 if (wheel_keycode != KEY_RESERVED) { 613 /* 614 * This is a scrollwheel event, send the 615 * scroll up (0x78) / down (0x70) scancode 616 * repeatedly as many times as indicated by 617 * rest of the scancode. 618 */ 619 count = (scancode & 0x07) + 1; 620 scancode &= 0x78; 621 } 622 623 while (count--) { 624 /* 625 * We don't use the rc-core repeat handling yet as 626 * it would cause ghost repeats which would be a 627 * regression for this driver. 628 */ 629 rc_keydown_notimeout(ati_remote->rdev, RC_TYPE_OTHER, 630 scancode, data[2]); 631 rc_keyup(ati_remote->rdev); 632 } 633 goto nosync; 634 } 635 636 } else if (ati_remote_tbl[index].kind == KIND_ACCEL) { 637 signed char dx = ati_remote_tbl[index].code >> 8; 638 signed char dy = ati_remote_tbl[index].code & 255; 639 640 /* 641 * Other event kinds are from the directional control pad, and 642 * have an acceleration factor applied to them. Without this 643 * acceleration, the control pad is mostly unusable. 644 */ 645 int acc = ati_remote_compute_accel(ati_remote); 646 if (dx) 647 input_report_rel(dev, REL_X, dx * acc); 648 if (dy) 649 input_report_rel(dev, REL_Y, dy * acc); 650 ati_remote->old_jiffies = jiffies; 651 652 } else { 653 dev_dbg(&ati_remote->interface->dev, "ati_remote kind=%d\n", 654 ati_remote_tbl[index].kind); 655 return; 656 } 657 input_sync(dev); 658 nosync: 659 ati_remote->old_data = data[2]; 660 } 661 662 /* 663 * ati_remote_irq_in 664 */ 665 static void ati_remote_irq_in(struct urb *urb) 666 { 667 struct ati_remote *ati_remote = urb->context; 668 int retval; 669 670 switch (urb->status) { 671 case 0: /* success */ 672 ati_remote_input_report(urb); 673 break; 674 case -ECONNRESET: /* unlink */ 675 case -ENOENT: 676 case -ESHUTDOWN: 677 dev_dbg(&ati_remote->interface->dev, 678 "%s: urb error status, unlink?\n", 679 __func__); 680 return; 681 default: /* error */ 682 dev_dbg(&ati_remote->interface->dev, 683 "%s: Nonzero urb status %d\n", 684 __func__, urb->status); 685 } 686 687 retval = usb_submit_urb(urb, GFP_ATOMIC); 688 if (retval) 689 dev_err(&ati_remote->interface->dev, 690 "%s: usb_submit_urb()=%d\n", 691 __func__, retval); 692 } 693 694 /* 695 * ati_remote_alloc_buffers 696 */ 697 static int ati_remote_alloc_buffers(struct usb_device *udev, 698 struct ati_remote *ati_remote) 699 { 700 ati_remote->inbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC, 701 &ati_remote->inbuf_dma); 702 if (!ati_remote->inbuf) 703 return -1; 704 705 ati_remote->outbuf = usb_alloc_coherent(udev, DATA_BUFSIZE, GFP_ATOMIC, 706 &ati_remote->outbuf_dma); 707 if (!ati_remote->outbuf) 708 return -1; 709 710 ati_remote->irq_urb = usb_alloc_urb(0, GFP_KERNEL); 711 if (!ati_remote->irq_urb) 712 return -1; 713 714 ati_remote->out_urb = usb_alloc_urb(0, GFP_KERNEL); 715 if (!ati_remote->out_urb) 716 return -1; 717 718 return 0; 719 } 720 721 /* 722 * ati_remote_free_buffers 723 */ 724 static void ati_remote_free_buffers(struct ati_remote *ati_remote) 725 { 726 usb_free_urb(ati_remote->irq_urb); 727 usb_free_urb(ati_remote->out_urb); 728 729 usb_free_coherent(ati_remote->udev, DATA_BUFSIZE, 730 ati_remote->inbuf, ati_remote->inbuf_dma); 731 732 usb_free_coherent(ati_remote->udev, DATA_BUFSIZE, 733 ati_remote->outbuf, ati_remote->outbuf_dma); 734 } 735 736 static void ati_remote_input_init(struct ati_remote *ati_remote) 737 { 738 struct input_dev *idev = ati_remote->idev; 739 int i; 740 741 idev->evbit[0] = BIT_MASK(EV_KEY) | BIT_MASK(EV_REL); 742 idev->keybit[BIT_WORD(BTN_MOUSE)] = BIT_MASK(BTN_LEFT) | 743 BIT_MASK(BTN_RIGHT) | BIT_MASK(BTN_SIDE) | BIT_MASK(BTN_EXTRA); 744 idev->relbit[0] = BIT_MASK(REL_X) | BIT_MASK(REL_Y); 745 for (i = 0; ati_remote_tbl[i].kind != KIND_END; i++) 746 if (ati_remote_tbl[i].kind == KIND_LITERAL || 747 ati_remote_tbl[i].kind == KIND_FILTERED) 748 __set_bit(ati_remote_tbl[i].code, idev->keybit); 749 750 input_set_drvdata(idev, ati_remote); 751 752 idev->open = ati_remote_input_open; 753 idev->close = ati_remote_input_close; 754 755 idev->name = ati_remote->mouse_name; 756 idev->phys = ati_remote->mouse_phys; 757 758 usb_to_input_id(ati_remote->udev, &idev->id); 759 idev->dev.parent = &ati_remote->interface->dev; 760 } 761 762 static void ati_remote_rc_init(struct ati_remote *ati_remote) 763 { 764 struct rc_dev *rdev = ati_remote->rdev; 765 766 rdev->priv = ati_remote; 767 rdev->driver_type = RC_DRIVER_SCANCODE; 768 rdev->allowed_protocols = RC_BIT_OTHER; 769 rdev->driver_name = "ati_remote"; 770 771 rdev->open = ati_remote_rc_open; 772 rdev->close = ati_remote_rc_close; 773 774 rdev->input_name = ati_remote->rc_name; 775 rdev->input_phys = ati_remote->rc_phys; 776 777 usb_to_input_id(ati_remote->udev, &rdev->input_id); 778 rdev->dev.parent = &ati_remote->interface->dev; 779 } 780 781 static int ati_remote_initialize(struct ati_remote *ati_remote) 782 { 783 struct usb_device *udev = ati_remote->udev; 784 int pipe, maxp; 785 786 init_waitqueue_head(&ati_remote->wait); 787 788 /* Set up irq_urb */ 789 pipe = usb_rcvintpipe(udev, ati_remote->endpoint_in->bEndpointAddress); 790 maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); 791 maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp; 792 793 usb_fill_int_urb(ati_remote->irq_urb, udev, pipe, ati_remote->inbuf, 794 maxp, ati_remote_irq_in, ati_remote, 795 ati_remote->endpoint_in->bInterval); 796 ati_remote->irq_urb->transfer_dma = ati_remote->inbuf_dma; 797 ati_remote->irq_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; 798 799 /* Set up out_urb */ 800 pipe = usb_sndintpipe(udev, ati_remote->endpoint_out->bEndpointAddress); 801 maxp = usb_maxpacket(udev, pipe, usb_pipeout(pipe)); 802 maxp = (maxp > DATA_BUFSIZE) ? DATA_BUFSIZE : maxp; 803 804 usb_fill_int_urb(ati_remote->out_urb, udev, pipe, ati_remote->outbuf, 805 maxp, ati_remote_irq_out, ati_remote, 806 ati_remote->endpoint_out->bInterval); 807 ati_remote->out_urb->transfer_dma = ati_remote->outbuf_dma; 808 ati_remote->out_urb->transfer_flags |= URB_NO_TRANSFER_DMA_MAP; 809 810 /* send initialization strings */ 811 if ((ati_remote_sendpacket(ati_remote, 0x8004, init1)) || 812 (ati_remote_sendpacket(ati_remote, 0x8007, init2))) { 813 dev_err(&ati_remote->interface->dev, 814 "Initializing ati_remote hardware failed.\n"); 815 return -EIO; 816 } 817 818 return 0; 819 } 820 821 /* 822 * ati_remote_probe 823 */ 824 static int ati_remote_probe(struct usb_interface *interface, 825 const struct usb_device_id *id) 826 { 827 struct usb_device *udev = interface_to_usbdev(interface); 828 struct usb_host_interface *iface_host = interface->cur_altsetting; 829 struct usb_endpoint_descriptor *endpoint_in, *endpoint_out; 830 struct ati_receiver_type *type = (struct ati_receiver_type *)id->driver_info; 831 struct ati_remote *ati_remote; 832 struct input_dev *input_dev; 833 struct rc_dev *rc_dev; 834 int err = -ENOMEM; 835 836 if (iface_host->desc.bNumEndpoints != 2) { 837 err("%s: Unexpected desc.bNumEndpoints\n", __func__); 838 return -ENODEV; 839 } 840 841 endpoint_in = &iface_host->endpoint[0].desc; 842 endpoint_out = &iface_host->endpoint[1].desc; 843 844 if (!usb_endpoint_is_int_in(endpoint_in)) { 845 err("%s: Unexpected endpoint_in\n", __func__); 846 return -ENODEV; 847 } 848 if (le16_to_cpu(endpoint_in->wMaxPacketSize) == 0) { 849 err("%s: endpoint_in message size==0? \n", __func__); 850 return -ENODEV; 851 } 852 853 ati_remote = kzalloc(sizeof (struct ati_remote), GFP_KERNEL); 854 rc_dev = rc_allocate_device(); 855 if (!ati_remote || !rc_dev) 856 goto exit_free_dev_rdev; 857 858 /* Allocate URB buffers, URBs */ 859 if (ati_remote_alloc_buffers(udev, ati_remote)) 860 goto exit_free_buffers; 861 862 ati_remote->endpoint_in = endpoint_in; 863 ati_remote->endpoint_out = endpoint_out; 864 ati_remote->udev = udev; 865 ati_remote->rdev = rc_dev; 866 ati_remote->interface = interface; 867 868 usb_make_path(udev, ati_remote->rc_phys, sizeof(ati_remote->rc_phys)); 869 strlcpy(ati_remote->mouse_phys, ati_remote->rc_phys, 870 sizeof(ati_remote->mouse_phys)); 871 872 strlcat(ati_remote->rc_phys, "/input0", sizeof(ati_remote->rc_phys)); 873 strlcat(ati_remote->mouse_phys, "/input1", sizeof(ati_remote->mouse_phys)); 874 875 snprintf(ati_remote->rc_name, sizeof(ati_remote->rc_name), "%s%s%s", 876 udev->manufacturer ?: "", 877 udev->manufacturer && udev->product ? " " : "", 878 udev->product ?: ""); 879 880 if (!strlen(ati_remote->rc_name)) 881 snprintf(ati_remote->rc_name, sizeof(ati_remote->rc_name), 882 DRIVER_DESC "(%04x,%04x)", 883 le16_to_cpu(ati_remote->udev->descriptor.idVendor), 884 le16_to_cpu(ati_remote->udev->descriptor.idProduct)); 885 886 snprintf(ati_remote->mouse_name, sizeof(ati_remote->mouse_name), 887 "%s mouse", ati_remote->rc_name); 888 889 rc_dev->map_name = RC_MAP_ATI_X10; /* default map */ 890 891 /* set default keymap according to receiver model */ 892 if (type) { 893 if (type->default_keymap) 894 rc_dev->map_name = type->default_keymap; 895 else if (type->get_default_keymap) 896 rc_dev->map_name = type->get_default_keymap(interface); 897 } 898 899 ati_remote_rc_init(ati_remote); 900 mutex_init(&ati_remote->open_mutex); 901 902 /* Device Hardware Initialization - fills in ati_remote->idev from udev. */ 903 err = ati_remote_initialize(ati_remote); 904 if (err) 905 goto exit_kill_urbs; 906 907 /* Set up and register rc device */ 908 err = rc_register_device(ati_remote->rdev); 909 if (err) 910 goto exit_kill_urbs; 911 912 /* use our delay for rc_dev */ 913 ati_remote->rdev->input_dev->rep[REP_DELAY] = repeat_delay; 914 915 /* Set up and register mouse input device */ 916 if (mouse) { 917 input_dev = input_allocate_device(); 918 if (!input_dev) { 919 err = -ENOMEM; 920 goto exit_unregister_device; 921 } 922 923 ati_remote->idev = input_dev; 924 ati_remote_input_init(ati_remote); 925 err = input_register_device(input_dev); 926 927 if (err) 928 goto exit_free_input_device; 929 } 930 931 usb_set_intfdata(interface, ati_remote); 932 return 0; 933 934 exit_free_input_device: 935 input_free_device(input_dev); 936 exit_unregister_device: 937 rc_unregister_device(rc_dev); 938 rc_dev = NULL; 939 exit_kill_urbs: 940 usb_kill_urb(ati_remote->irq_urb); 941 usb_kill_urb(ati_remote->out_urb); 942 exit_free_buffers: 943 ati_remote_free_buffers(ati_remote); 944 exit_free_dev_rdev: 945 rc_free_device(rc_dev); 946 kfree(ati_remote); 947 return err; 948 } 949 950 /* 951 * ati_remote_disconnect 952 */ 953 static void ati_remote_disconnect(struct usb_interface *interface) 954 { 955 struct ati_remote *ati_remote; 956 957 ati_remote = usb_get_intfdata(interface); 958 usb_set_intfdata(interface, NULL); 959 if (!ati_remote) { 960 dev_warn(&interface->dev, "%s - null device?\n", __func__); 961 return; 962 } 963 964 usb_kill_urb(ati_remote->irq_urb); 965 usb_kill_urb(ati_remote->out_urb); 966 if (ati_remote->idev) 967 input_unregister_device(ati_remote->idev); 968 rc_unregister_device(ati_remote->rdev); 969 ati_remote_free_buffers(ati_remote); 970 kfree(ati_remote); 971 } 972 973 /* usb specific object to register with the usb subsystem */ 974 static struct usb_driver ati_remote_driver = { 975 .name = "ati_remote", 976 .probe = ati_remote_probe, 977 .disconnect = ati_remote_disconnect, 978 .id_table = ati_remote_table, 979 }; 980 981 module_usb_driver(ati_remote_driver); 982 983 MODULE_AUTHOR(DRIVER_AUTHOR); 984 MODULE_DESCRIPTION(DRIVER_DESC); 985 MODULE_LICENSE("GPL"); 986