xref: /openbmc/linux/drivers/media/rc/Kconfig (revision ab73b751) 
1menuconfig RC_CORE
2	tristate "Remote Controller adapters"
3	depends on INPUT
4	default INPUT
5	---help---
6	  Enable support for Remote Controllers on Linux. This is
7	  needed in order to support several video capture adapters,
8	  standalone IR receivers/transmitters, and RF receivers.
9
10	  Enable this option if you have a video capture board even
11	  if you don't need IR, as otherwise, you may not be able to
12	  compile the driver for your adapter.
13
14if RC_CORE
15
16config LIRC
17	tristate
18	default y
19
20	---help---
21	   Enable this option to build the Linux Infrared Remote
22	   Control (LIRC) core device interface driver. The LIRC
23	   interface passes raw IR to and from userspace, where the
24	   LIRC daemon handles protocol decoding for IR reception and
25	   encoding for IR transmitting (aka "blasting").
26
27source "drivers/media/rc/keymaps/Kconfig"
28
29config IR_NEC_DECODER
30	tristate "Enable IR raw decoder for the NEC protocol"
31	depends on RC_CORE
32	select BITREVERSE
33	default y
34
35	---help---
36	   Enable this option if you have IR with NEC protocol, and
37	   if the IR is decoded in software
38
39config IR_RC5_DECODER
40	tristate "Enable IR raw decoder for the RC-5 protocol"
41	depends on RC_CORE
42	select BITREVERSE
43	default y
44
45	---help---
46	   Enable this option if you have IR with RC-5 protocol, and
47	   if the IR is decoded in software
48
49config IR_RC6_DECODER
50	tristate "Enable IR raw decoder for the RC6 protocol"
51	depends on RC_CORE
52	select BITREVERSE
53	default y
54
55	---help---
56	   Enable this option if you have an infrared remote control which
57	   uses the RC6 protocol, and you need software decoding support.
58
59config IR_JVC_DECODER
60	tristate "Enable IR raw decoder for the JVC protocol"
61	depends on RC_CORE
62	select BITREVERSE
63	default y
64
65	---help---
66	   Enable this option if you have an infrared remote control which
67	   uses the JVC protocol, and you need software decoding support.
68
69config IR_SONY_DECODER
70	tristate "Enable IR raw decoder for the Sony protocol"
71	depends on RC_CORE
72	select BITREVERSE
73	default y
74
75	---help---
76	   Enable this option if you have an infrared remote control which
77	   uses the Sony protocol, and you need software decoding support.
78
79config IR_RC5_SZ_DECODER
80	tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
81	depends on RC_CORE
82	select BITREVERSE
83	default y
84
85	---help---
86	   Enable this option if you have IR with RC-5 (streamzap) protocol,
87	   and if the IR is decoded in software. (The Streamzap PC Remote
88	   uses an IR protocol that is almost standard RC-5, but not quite,
89	   as it uses an additional bit).
90
91config IR_SANYO_DECODER
92	tristate "Enable IR raw decoder for the Sanyo protocol"
93	depends on RC_CORE
94	default y
95
96	---help---
97	   Enable this option if you have an infrared remote control which
98	   uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes),
99	   and you need software decoding support.
100
101config IR_MCE_KBD_DECODER
102	tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
103	depends on RC_CORE
104	select BITREVERSE
105	default y
106
107	---help---
108	   Enable this option if you have a Microsoft Remote Keyboard for
109	   Windows Media Center Edition, which you would like to use with
110	   a raw IR receiver in your system.
111
112config IR_LIRC_CODEC
113	tristate "Enable IR to LIRC bridge"
114	depends on RC_CORE
115	depends on LIRC
116	default y
117
118	---help---
119	   Enable this option to pass raw IR to and from userspace via
120	   the LIRC interface.
121
122config RC_ATI_REMOTE
123	tristate "ATI / X10 based USB RF remote controls"
124	depends on USB_ARCH_HAS_HCD
125	depends on RC_CORE
126	select USB
127	help
128	   Say Y here if you want to use an X10 based USB remote control.
129	   These are RF remotes with USB receivers.
130
131	   Such devices include the ATI remote that comes with many of ATI's
132	   All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote,
133	   Medion RF remote, and SnapStream FireFly remote.
134
135	   This driver provides mouse pointer, left and right mouse buttons,
136	   and maps all the other remote buttons to keypress events.
137
138	   To compile this driver as a module, choose M here: the module will be
139	   called ati_remote.
140
141config IR_ENE
142	tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
143	depends on PNP
144	depends on RC_CORE
145	---help---
146	   Say Y here to enable support for integrated infrared receiver
147	   /transceiver made by ENE.
148
149	   You can see if you have it by looking at lspnp output.
150	   Output should include ENE0100 ENE0200 or something similar.
151
152	   To compile this driver as a module, choose M here: the
153	   module will be called ene_ir.
154
155config IR_IMON
156	tristate "SoundGraph iMON Receiver and Display"
157	depends on USB_ARCH_HAS_HCD
158	depends on RC_CORE
159	select USB
160	---help---
161	   Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
162	   IR Receiver and/or LCD/VFD/VGA display.
163
164	   To compile this driver as a module, choose M here: the
165	   module will be called imon.
166
167config IR_MCEUSB
168	tristate "Windows Media Center Ed. eHome Infrared Transceiver"
169	depends on USB_ARCH_HAS_HCD
170	depends on RC_CORE
171	select USB
172	---help---
173	   Say Y here if you want to use a Windows Media Center Edition
174	   eHome Infrared Transceiver.
175
176	   To compile this driver as a module, choose M here: the
177	   module will be called mceusb.
178
179config IR_ITE_CIR
180	tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
181	depends on PNP
182	depends on RC_CORE
183	---help---
184	   Say Y here to enable support for integrated infrared receivers
185	   /transceivers made by ITE Tech Inc. These are found in
186	   several ASUS devices, like the ASUS Digimatrix or the ASUS
187	   EEEBox 1501U.
188
189	   To compile this driver as a module, choose M here: the
190	   module will be called ite-cir.
191
192config IR_FINTEK
193	tristate "Fintek Consumer Infrared Transceiver"
194	depends on PNP
195	depends on RC_CORE
196	---help---
197	   Say Y here to enable support for integrated infrared receiver
198	   /transciever made by Fintek. This chip is found on assorted
199	   Jetway motherboards (and of course, possibly others).
200
201	   To compile this driver as a module, choose M here: the
202	   module will be called fintek-cir.
203
204config IR_NUVOTON
205	tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
206	depends on PNP
207	depends on RC_CORE
208	---help---
209	   Say Y here to enable support for integrated infrared receiver
210	   /transciever made by Nuvoton (formerly Winbond). This chip is
211	   found in the ASRock ION 330HT, as well as assorted Intel
212	   DP55-series motherboards (and of course, possibly others).
213
214	   To compile this driver as a module, choose M here: the
215	   module will be called nuvoton-cir.
216
217config IR_REDRAT3
218	tristate "RedRat3 IR Transceiver"
219	depends on USB_ARCH_HAS_HCD
220	depends on RC_CORE
221	select USB
222	---help---
223	   Say Y here if you want to use a RedRat3 Infrared Transceiver.
224
225	   To compile this driver as a module, choose M here: the
226	   module will be called redrat3.
227
228config IR_STREAMZAP
229	tristate "Streamzap PC Remote IR Receiver"
230	depends on USB_ARCH_HAS_HCD
231	depends on RC_CORE
232	select USB
233	---help---
234	   Say Y here if you want to use a Streamzap PC Remote
235	   Infrared Receiver.
236
237	   To compile this driver as a module, choose M here: the
238	   module will be called streamzap.
239
240config IR_WINBOND_CIR
241	tristate "Winbond IR remote control"
242	depends on X86 && PNP
243	depends on RC_CORE
244	select NEW_LEDS
245	select LEDS_CLASS
246	select LEDS_TRIGGERS
247	select BITREVERSE
248	---help---
249	   Say Y here if you want to use the IR remote functionality found
250	   in some Winbond SuperI/O chips. Currently only the WPCD376I
251	   chip is supported (included in some Intel Media series
252	   motherboards).
253
254	   To compile this driver as a module, choose M here: the module will
255	   be called winbond_cir.
256
257config RC_LOOPBACK
258	tristate "Remote Control Loopback Driver"
259	depends on RC_CORE
260	---help---
261	   Say Y here if you want support for the remote control loopback
262	   driver which allows TX data to be sent back as RX data.
263	   This is mostly useful for debugging purposes.
264
265	   If you're not sure, select N here.
266
267	   To compile this driver as a module, choose M here: the module will
268	   be called rc_loopback.
269
270config IR_GPIO_CIR
271	tristate "GPIO IR remote control"
272	depends on RC_CORE
273	---help---
274	   Say Y if you want to use GPIO based IR Receiver.
275
276	   To compile this driver as a module, choose M here: the module will
277	   be called gpio-ir-recv.
278
279endif #RC_CORE
280