1menuconfig RC_CORE 2 tristate "Remote Controller adapters" 3 depends on INPUT 4 default INPUT 5 ---help--- 6 Enable support for Remote Controllers on Linux. This is 7 needed in order to support several video capture adapters. 8 Currently, all supported devices use InfraRed. 9 10 Enable this option if you have a video capture board even 11 if you don't need IR, as otherwise, you may not be able to 12 compile the driver for your adapter. 13 14if RC_CORE 15 16config LIRC 17 tristate 18 default y 19 20 ---help--- 21 Enable this option to build the Linux Infrared Remote 22 Control (LIRC) core device interface driver. The LIRC 23 interface passes raw IR to and from userspace, where the 24 LIRC daemon handles protocol decoding for IR reception and 25 encoding for IR transmitting (aka "blasting"). 26 27source "drivers/media/rc/keymaps/Kconfig" 28 29config IR_NEC_DECODER 30 tristate "Enable IR raw decoder for the NEC protocol" 31 depends on RC_CORE 32 select BITREVERSE 33 default y 34 35 ---help--- 36 Enable this option if you have IR with NEC protocol, and 37 if the IR is decoded in software 38 39config IR_RC5_DECODER 40 tristate "Enable IR raw decoder for the RC-5 protocol" 41 depends on RC_CORE 42 select BITREVERSE 43 default y 44 45 ---help--- 46 Enable this option if you have IR with RC-5 protocol, and 47 if the IR is decoded in software 48 49config IR_RC6_DECODER 50 tristate "Enable IR raw decoder for the RC6 protocol" 51 depends on RC_CORE 52 select BITREVERSE 53 default y 54 55 ---help--- 56 Enable this option if you have an infrared remote control which 57 uses the RC6 protocol, and you need software decoding support. 58 59config IR_JVC_DECODER 60 tristate "Enable IR raw decoder for the JVC protocol" 61 depends on RC_CORE 62 select BITREVERSE 63 default y 64 65 ---help--- 66 Enable this option if you have an infrared remote control which 67 uses the JVC protocol, and you need software decoding support. 68 69config IR_SONY_DECODER 70 tristate "Enable IR raw decoder for the Sony protocol" 71 depends on RC_CORE 72 default y 73 74 ---help--- 75 Enable this option if you have an infrared remote control which 76 uses the Sony protocol, and you need software decoding support. 77 78config IR_RC5_SZ_DECODER 79 tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol" 80 depends on RC_CORE 81 select BITREVERSE 82 default y 83 84 ---help--- 85 Enable this option if you have IR with RC-5 (streamzap) protocol, 86 and if the IR is decoded in software. (The Streamzap PC Remote 87 uses an IR protocol that is almost standard RC-5, but not quite, 88 as it uses an additional bit). 89 90config IR_MCE_KBD_DECODER 91 tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol" 92 depends on RC_CORE 93 select BITREVERSE 94 default y 95 96 ---help--- 97 Enable this option if you have a Microsoft Remote Keyboard for 98 Windows Media Center Edition, which you would like to use with 99 a raw IR receiver in your system. 100 101config IR_LIRC_CODEC 102 tristate "Enable IR to LIRC bridge" 103 depends on RC_CORE 104 depends on LIRC 105 default y 106 107 ---help--- 108 Enable this option to pass raw IR to and from userspace via 109 the LIRC interface. 110 111config IR_ENE 112 tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)" 113 depends on PNP 114 depends on RC_CORE 115 ---help--- 116 Say Y here to enable support for integrated infrared receiver 117 /transceiver made by ENE. 118 119 You can see if you have it by looking at lspnp output. 120 Output should include ENE0100 ENE0200 or something similar. 121 122 To compile this driver as a module, choose M here: the 123 module will be called ene_ir. 124 125config IR_IMON 126 tristate "SoundGraph iMON Receiver and Display" 127 depends on USB_ARCH_HAS_HCD 128 depends on RC_CORE 129 select USB 130 ---help--- 131 Say Y here if you want to use a SoundGraph iMON (aka Antec Veris) 132 IR Receiver and/or LCD/VFD/VGA display. 133 134 To compile this driver as a module, choose M here: the 135 module will be called imon. 136 137config IR_MCEUSB 138 tristate "Windows Media Center Ed. eHome Infrared Transceiver" 139 depends on USB_ARCH_HAS_HCD 140 depends on RC_CORE 141 select USB 142 ---help--- 143 Say Y here if you want to use a Windows Media Center Edition 144 eHome Infrared Transceiver. 145 146 To compile this driver as a module, choose M here: the 147 module will be called mceusb. 148 149config IR_ITE_CIR 150 tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver" 151 depends on PNP 152 depends on RC_CORE 153 ---help--- 154 Say Y here to enable support for integrated infrared receivers 155 /transceivers made by ITE Tech Inc. These are found in 156 several ASUS devices, like the ASUS Digimatrix or the ASUS 157 EEEBox 1501U. 158 159 To compile this driver as a module, choose M here: the 160 module will be called ite-cir. 161 162config IR_FINTEK 163 tristate "Fintek Consumer Infrared Transceiver" 164 depends on PNP 165 depends on RC_CORE 166 ---help--- 167 Say Y here to enable support for integrated infrared receiver 168 /transciever made by Fintek. This chip is found on assorted 169 Jetway motherboards (and of course, possibly others). 170 171 To compile this driver as a module, choose M here: the 172 module will be called fintek-cir. 173 174config IR_NUVOTON 175 tristate "Nuvoton w836x7hg Consumer Infrared Transceiver" 176 depends on PNP 177 depends on RC_CORE 178 ---help--- 179 Say Y here to enable support for integrated infrared receiver 180 /transciever made by Nuvoton (formerly Winbond). This chip is 181 found in the ASRock ION 330HT, as well as assorted Intel 182 DP55-series motherboards (and of course, possibly others). 183 184 To compile this driver as a module, choose M here: the 185 module will be called nuvoton-cir. 186 187config IR_REDRAT3 188 tristate "RedRat3 IR Transceiver" 189 depends on USB_ARCH_HAS_HCD 190 depends on RC_CORE 191 select USB 192 ---help--- 193 Say Y here if you want to use a RedRat3 Infrared Transceiver. 194 195 To compile this driver as a module, choose M here: the 196 module will be called redrat3. 197 198config IR_STREAMZAP 199 tristate "Streamzap PC Remote IR Receiver" 200 depends on USB_ARCH_HAS_HCD 201 depends on RC_CORE 202 select USB 203 ---help--- 204 Say Y here if you want to use a Streamzap PC Remote 205 Infrared Receiver. 206 207 To compile this driver as a module, choose M here: the 208 module will be called streamzap. 209 210config IR_WINBOND_CIR 211 tristate "Winbond IR remote control" 212 depends on X86 && PNP 213 depends on RC_CORE 214 select NEW_LEDS 215 select LEDS_CLASS 216 select LEDS_TRIGGERS 217 select BITREVERSE 218 ---help--- 219 Say Y here if you want to use the IR remote functionality found 220 in some Winbond SuperI/O chips. Currently only the WPCD376I 221 chip is supported (included in some Intel Media series 222 motherboards). 223 224 To compile this driver as a module, choose M here: the module will 225 be called winbond_cir. 226 227config RC_LOOPBACK 228 tristate "Remote Control Loopback Driver" 229 depends on RC_CORE 230 ---help--- 231 Say Y here if you want support for the remote control loopback 232 driver which allows TX data to be sent back as RX data. 233 This is mostly useful for debugging purposes. 234 235 If you're not sure, select N here. 236 237 To compile this driver as a module, choose M here: the module will 238 be called rc_loopback. 239 240endif #RC_CORE 241