xref: /openbmc/linux/drivers/media/rc/Kconfig (revision 63dc02bd) 
1menuconfig RC_CORE
2	tristate "Remote Controller adapters"
3	depends on INPUT
4	default INPUT
5	---help---
6	  Enable support for Remote Controllers on Linux. This is
7	  needed in order to support several video capture adapters,
8	  standalone IR receivers/transmitters, and RF receivers.
9
10	  Enable this option if you have a video capture board even
11	  if you don't need IR, as otherwise, you may not be able to
12	  compile the driver for your adapter.
13
14if RC_CORE
15
16config LIRC
17	tristate
18	default y
19
20	---help---
21	   Enable this option to build the Linux Infrared Remote
22	   Control (LIRC) core device interface driver. The LIRC
23	   interface passes raw IR to and from userspace, where the
24	   LIRC daemon handles protocol decoding for IR reception and
25	   encoding for IR transmitting (aka "blasting").
26
27source "drivers/media/rc/keymaps/Kconfig"
28
29config IR_NEC_DECODER
30	tristate "Enable IR raw decoder for the NEC protocol"
31	depends on RC_CORE
32	select BITREVERSE
33	default y
34
35	---help---
36	   Enable this option if you have IR with NEC protocol, and
37	   if the IR is decoded in software
38
39config IR_RC5_DECODER
40	tristate "Enable IR raw decoder for the RC-5 protocol"
41	depends on RC_CORE
42	select BITREVERSE
43	default y
44
45	---help---
46	   Enable this option if you have IR with RC-5 protocol, and
47	   if the IR is decoded in software
48
49config IR_RC6_DECODER
50	tristate "Enable IR raw decoder for the RC6 protocol"
51	depends on RC_CORE
52	select BITREVERSE
53	default y
54
55	---help---
56	   Enable this option if you have an infrared remote control which
57	   uses the RC6 protocol, and you need software decoding support.
58
59config IR_JVC_DECODER
60	tristate "Enable IR raw decoder for the JVC protocol"
61	depends on RC_CORE
62	select BITREVERSE
63	default y
64
65	---help---
66	   Enable this option if you have an infrared remote control which
67	   uses the JVC protocol, and you need software decoding support.
68
69config IR_SONY_DECODER
70	tristate "Enable IR raw decoder for the Sony protocol"
71	depends on RC_CORE
72	default y
73
74	---help---
75	   Enable this option if you have an infrared remote control which
76	   uses the Sony protocol, and you need software decoding support.
77
78config IR_RC5_SZ_DECODER
79	tristate "Enable IR raw decoder for the RC-5 (streamzap) protocol"
80	depends on RC_CORE
81	select BITREVERSE
82	default y
83
84	---help---
85	   Enable this option if you have IR with RC-5 (streamzap) protocol,
86	   and if the IR is decoded in software. (The Streamzap PC Remote
87	   uses an IR protocol that is almost standard RC-5, but not quite,
88	   as it uses an additional bit).
89
90config IR_SANYO_DECODER
91	tristate "Enable IR raw decoder for the Sanyo protocol"
92	depends on RC_CORE
93	default y
94
95	---help---
96	   Enable this option if you have an infrared remote control which
97	   uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes),
98	   and you need software decoding support.
99
100config IR_MCE_KBD_DECODER
101	tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol"
102	depends on RC_CORE
103	select BITREVERSE
104	default y
105
106	---help---
107	   Enable this option if you have a Microsoft Remote Keyboard for
108	   Windows Media Center Edition, which you would like to use with
109	   a raw IR receiver in your system.
110
111config IR_LIRC_CODEC
112	tristate "Enable IR to LIRC bridge"
113	depends on RC_CORE
114	depends on LIRC
115	default y
116
117	---help---
118	   Enable this option to pass raw IR to and from userspace via
119	   the LIRC interface.
120
121config RC_ATI_REMOTE
122	tristate "ATI / X10 based USB RF remote controls"
123	depends on USB_ARCH_HAS_HCD
124	depends on RC_CORE
125	select USB
126	help
127	   Say Y here if you want to use an X10 based USB remote control.
128	   These are RF remotes with USB receivers.
129
130	   Such devices include the ATI remote that comes with many of ATI's
131	   All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote,
132	   Medion RF remote, and SnapStream FireFly remote.
133
134	   This driver provides mouse pointer, left and right mouse buttons,
135	   and maps all the other remote buttons to keypress events.
136
137	   To compile this driver as a module, choose M here: the module will be
138	   called ati_remote.
139
140config IR_ENE
141	tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)"
142	depends on PNP
143	depends on RC_CORE
144	---help---
145	   Say Y here to enable support for integrated infrared receiver
146	   /transceiver made by ENE.
147
148	   You can see if you have it by looking at lspnp output.
149	   Output should include ENE0100 ENE0200 or something similar.
150
151	   To compile this driver as a module, choose M here: the
152	   module will be called ene_ir.
153
154config IR_IMON
155	tristate "SoundGraph iMON Receiver and Display"
156	depends on USB_ARCH_HAS_HCD
157	depends on RC_CORE
158	select USB
159	---help---
160	   Say Y here if you want to use a SoundGraph iMON (aka Antec Veris)
161	   IR Receiver and/or LCD/VFD/VGA display.
162
163	   To compile this driver as a module, choose M here: the
164	   module will be called imon.
165
166config IR_MCEUSB
167	tristate "Windows Media Center Ed. eHome Infrared Transceiver"
168	depends on USB_ARCH_HAS_HCD
169	depends on RC_CORE
170	select USB
171	---help---
172	   Say Y here if you want to use a Windows Media Center Edition
173	   eHome Infrared Transceiver.
174
175	   To compile this driver as a module, choose M here: the
176	   module will be called mceusb.
177
178config IR_ITE_CIR
179	tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver"
180	depends on PNP
181	depends on RC_CORE
182	---help---
183	   Say Y here to enable support for integrated infrared receivers
184	   /transceivers made by ITE Tech Inc. These are found in
185	   several ASUS devices, like the ASUS Digimatrix or the ASUS
186	   EEEBox 1501U.
187
188	   To compile this driver as a module, choose M here: the
189	   module will be called ite-cir.
190
191config IR_FINTEK
192	tristate "Fintek Consumer Infrared Transceiver"
193	depends on PNP
194	depends on RC_CORE
195	---help---
196	   Say Y here to enable support for integrated infrared receiver
197	   /transciever made by Fintek. This chip is found on assorted
198	   Jetway motherboards (and of course, possibly others).
199
200	   To compile this driver as a module, choose M here: the
201	   module will be called fintek-cir.
202
203config IR_NUVOTON
204	tristate "Nuvoton w836x7hg Consumer Infrared Transceiver"
205	depends on PNP
206	depends on RC_CORE
207	---help---
208	   Say Y here to enable support for integrated infrared receiver
209	   /transciever made by Nuvoton (formerly Winbond). This chip is
210	   found in the ASRock ION 330HT, as well as assorted Intel
211	   DP55-series motherboards (and of course, possibly others).
212
213	   To compile this driver as a module, choose M here: the
214	   module will be called nuvoton-cir.
215
216config IR_REDRAT3
217	tristate "RedRat3 IR Transceiver"
218	depends on USB_ARCH_HAS_HCD
219	depends on RC_CORE
220	select USB
221	---help---
222	   Say Y here if you want to use a RedRat3 Infrared Transceiver.
223
224	   To compile this driver as a module, choose M here: the
225	   module will be called redrat3.
226
227config IR_STREAMZAP
228	tristate "Streamzap PC Remote IR Receiver"
229	depends on USB_ARCH_HAS_HCD
230	depends on RC_CORE
231	select USB
232	---help---
233	   Say Y here if you want to use a Streamzap PC Remote
234	   Infrared Receiver.
235
236	   To compile this driver as a module, choose M here: the
237	   module will be called streamzap.
238
239config IR_WINBOND_CIR
240	tristate "Winbond IR remote control"
241	depends on X86 && PNP
242	depends on RC_CORE
243	select NEW_LEDS
244	select LEDS_CLASS
245	select LEDS_TRIGGERS
246	select BITREVERSE
247	---help---
248	   Say Y here if you want to use the IR remote functionality found
249	   in some Winbond SuperI/O chips. Currently only the WPCD376I
250	   chip is supported (included in some Intel Media series
251	   motherboards).
252
253	   To compile this driver as a module, choose M here: the module will
254	   be called winbond_cir.
255
256config RC_LOOPBACK
257	tristate "Remote Control Loopback Driver"
258	depends on RC_CORE
259	---help---
260	   Say Y here if you want support for the remote control loopback
261	   driver which allows TX data to be sent back as RX data.
262	   This is mostly useful for debugging purposes.
263
264	   If you're not sure, select N here.
265
266	   To compile this driver as a module, choose M here: the module will
267	   be called rc_loopback.
268
269config IR_GPIO_CIR
270	tristate "GPIO IR remote control"
271	depends on RC_CORE
272	---help---
273	   Say Y if you want to use GPIO based IR Receiver.
274
275	   To compile this driver as a module, choose M here: the module will
276	   be called gpio-ir-recv.
277
278endif #RC_CORE
279