1 2menuconfig RC_CORE 3 tristate "Remote Controller support" 4 depends on INPUT 5 ---help--- 6 Enable support for Remote Controllers on Linux. This is 7 needed in order to support several video capture adapters, 8 standalone IR receivers/transmitters, and RF receivers. 9 10 Enable this option if you have a video capture board even 11 if you don't need IR, as otherwise, you may not be able to 12 compile the driver for your adapter. 13 14 Say Y when you have a TV or an IR device. 15 16if RC_CORE 17source "drivers/media/rc/keymaps/Kconfig" 18 19config LIRC 20 bool "LIRC user interface" 21 depends on RC_CORE 22 ---help--- 23 Enable this option to enable the Linux Infrared Remote 24 Control user interface (e.g. /dev/lirc*). This interface 25 passes raw IR to and from userspace, which is needed for 26 IR transmitting (aka "blasting") and for the lirc daemon. 27 28config BPF_LIRC_MODE2 29 bool "Support for eBPF programs attached to lirc devices" 30 depends on BPF_SYSCALL 31 depends on RC_CORE=y 32 depends on LIRC 33 help 34 Allow attaching eBPF programs to a lirc device using the bpf(2) 35 syscall command BPF_PROG_ATTACH. This is supported for raw IR 36 receivers. 37 38 These eBPF programs can be used to decode IR into scancodes, for 39 IR protocols not supported by the kernel decoders. 40 41menuconfig RC_DECODERS 42 bool "Remote controller decoders" 43 depends on RC_CORE 44 45if RC_DECODERS 46config IR_NEC_DECODER 47 tristate "Enable IR raw decoder for the NEC protocol" 48 depends on RC_CORE 49 select BITREVERSE 50 51 ---help--- 52 Enable this option if you have IR with NEC protocol, and 53 if the IR is decoded in software 54 55config IR_RC5_DECODER 56 tristate "Enable IR raw decoder for the RC-5 protocol" 57 depends on RC_CORE 58 select BITREVERSE 59 60 ---help--- 61 Enable this option if you have IR with RC-5 protocol, and 62 if the IR is decoded in software 63 64config IR_RC6_DECODER 65 tristate "Enable IR raw decoder for the RC6 protocol" 66 depends on RC_CORE 67 select BITREVERSE 68 69 ---help--- 70 Enable this option if you have an infrared remote control which 71 uses the RC6 protocol, and you need software decoding support. 72 73config IR_JVC_DECODER 74 tristate "Enable IR raw decoder for the JVC protocol" 75 depends on RC_CORE 76 select BITREVERSE 77 78 ---help--- 79 Enable this option if you have an infrared remote control which 80 uses the JVC protocol, and you need software decoding support. 81 82config IR_SONY_DECODER 83 tristate "Enable IR raw decoder for the Sony protocol" 84 depends on RC_CORE 85 select BITREVERSE 86 87 ---help--- 88 Enable this option if you have an infrared remote control which 89 uses the Sony protocol, and you need software decoding support. 90 91config IR_SANYO_DECODER 92 tristate "Enable IR raw decoder for the Sanyo protocol" 93 depends on RC_CORE 94 95 ---help--- 96 Enable this option if you have an infrared remote control which 97 uses the Sanyo protocol (Sanyo, Aiwa, Chinon remotes), 98 and you need software decoding support. 99 100config IR_SHARP_DECODER 101 tristate "Enable IR raw decoder for the Sharp protocol" 102 depends on RC_CORE 103 104 ---help--- 105 Enable this option if you have an infrared remote control which 106 uses the Sharp protocol (Sharp, Denon), and you need software 107 decoding support. 108 109config IR_MCE_KBD_DECODER 110 tristate "Enable IR raw decoder for the MCE keyboard/mouse protocol" 111 depends on RC_CORE 112 select BITREVERSE 113 114 ---help--- 115 Enable this option if you have a Microsoft Remote Keyboard for 116 Windows Media Center Edition, which you would like to use with 117 a raw IR receiver in your system. 118 119config IR_XMP_DECODER 120 tristate "Enable IR raw decoder for the XMP protocol" 121 depends on RC_CORE 122 select BITREVERSE 123 124 ---help--- 125 Enable this option if you have IR with XMP protocol, and 126 if the IR is decoded in software 127 128config IR_IMON_DECODER 129 tristate "Enable IR raw decoder for the iMON protocol" 130 depends on RC_CORE 131 ---help--- 132 Enable this option if you have iMON PAD or Antec Veris infrared 133 remote control and you would like to use it with a raw IR 134 receiver, or if you wish to use an encoder to transmit this IR. 135 136config IR_RCMM_DECODER 137 tristate "Enable IR raw decoder for the RC-MM protocol" 138 depends on RC_CORE 139 help 140 Enable this option when you have IR with RC-MM protocol, and 141 you need the software decoder. The driver supports 12, 142 24 and 32 bits RC-MM variants. You can enable or disable the 143 different modes using the following RC protocol keywords: 144 'rc-mm-12', 'rc-mm-24' and 'rc-mm-32'. 145 146 To compile this driver as a module, choose M here: the module 147 will be called ir-rcmm-decoder. 148 149endif #RC_DECODERS 150 151menuconfig RC_DEVICES 152 bool "Remote Controller devices" 153 depends on RC_CORE 154 155if RC_DEVICES 156 157config RC_ATI_REMOTE 158 tristate "ATI / X10 based USB RF remote controls" 159 depends on USB_ARCH_HAS_HCD 160 depends on RC_CORE 161 select USB 162 help 163 Say Y here if you want to use an X10 based USB remote control. 164 These are RF remotes with USB receivers. 165 166 Such devices include the ATI remote that comes with many of ATI's 167 All-In-Wonder video cards, the X10 "Lola" remote, NVIDIA RF remote, 168 Medion RF remote, and SnapStream FireFly remote. 169 170 This driver provides mouse pointer, left and right mouse buttons, 171 and maps all the other remote buttons to keypress events. 172 173 To compile this driver as a module, choose M here: the module will be 174 called ati_remote. 175 176config IR_ENE 177 tristate "ENE eHome Receiver/Transceiver (pnp id: ENE0100/ENE02xxx)" 178 depends on PNP || COMPILE_TEST 179 depends on RC_CORE 180 ---help--- 181 Say Y here to enable support for integrated infrared receiver 182 /transceiver made by ENE. 183 184 You can see if you have it by looking at lspnp output. 185 Output should include ENE0100 ENE0200 or something similar. 186 187 To compile this driver as a module, choose M here: the 188 module will be called ene_ir. 189 190config IR_HIX5HD2 191 tristate "Hisilicon hix5hd2 IR remote control" 192 depends on RC_CORE 193 depends on OF || COMPILE_TEST 194 help 195 Say Y here if you want to use hisilicon hix5hd2 remote control. 196 To compile this driver as a module, choose M here: the module will be 197 called ir-hix5hd2. 198 199 If you're not sure, select N here 200 201config IR_IMON 202 tristate "SoundGraph iMON Receiver and Display" 203 depends on USB_ARCH_HAS_HCD 204 depends on RC_CORE 205 select USB 206 ---help--- 207 Say Y here if you want to use a SoundGraph iMON (aka Antec Veris) 208 IR Receiver and/or LCD/VFD/VGA display. 209 210 To compile this driver as a module, choose M here: the 211 module will be called imon. 212 213config IR_IMON_RAW 214 tristate "SoundGraph iMON Receiver (early raw IR models)" 215 depends on USB_ARCH_HAS_HCD 216 depends on RC_CORE 217 select USB 218 ---help--- 219 Say Y here if you want to use a SoundGraph iMON IR Receiver, 220 early raw models. 221 222 To compile this driver as a module, choose M here: the 223 module will be called imon_raw. 224 225config IR_MCEUSB 226 tristate "Windows Media Center Ed. eHome Infrared Transceiver" 227 depends on USB_ARCH_HAS_HCD 228 depends on RC_CORE 229 select USB 230 ---help--- 231 Say Y here if you want to use a Windows Media Center Edition 232 eHome Infrared Transceiver. 233 234 To compile this driver as a module, choose M here: the 235 module will be called mceusb. 236 237config IR_ITE_CIR 238 tristate "ITE Tech Inc. IT8712/IT8512 Consumer Infrared Transceiver" 239 depends on PNP || COMPILE_TEST 240 depends on RC_CORE 241 ---help--- 242 Say Y here to enable support for integrated infrared receivers 243 /transceivers made by ITE Tech Inc. These are found in 244 several ASUS devices, like the ASUS Digimatrix or the ASUS 245 EEEBox 1501U. 246 247 To compile this driver as a module, choose M here: the 248 module will be called ite-cir. 249 250config IR_FINTEK 251 tristate "Fintek Consumer Infrared Transceiver" 252 depends on PNP || COMPILE_TEST 253 depends on RC_CORE 254 ---help--- 255 Say Y here to enable support for integrated infrared receiver 256 /transceiver made by Fintek. This chip is found on assorted 257 Jetway motherboards (and of course, possibly others). 258 259 To compile this driver as a module, choose M here: the 260 module will be called fintek-cir. 261 262config IR_MESON 263 tristate "Amlogic Meson IR remote receiver" 264 depends on RC_CORE 265 depends on ARCH_MESON || COMPILE_TEST 266 ---help--- 267 Say Y if you want to use the IR remote receiver available 268 on Amlogic Meson SoCs. 269 270 To compile this driver as a module, choose M here: the 271 module will be called meson-ir. 272 273config IR_MTK 274 tristate "Mediatek IR remote receiver" 275 depends on RC_CORE 276 depends on ARCH_MEDIATEK || COMPILE_TEST 277 ---help--- 278 Say Y if you want to use the IR remote receiver available 279 on Mediatek SoCs. 280 281 To compile this driver as a module, choose M here: the 282 module will be called mtk-cir. 283 284config IR_NUVOTON 285 tristate "Nuvoton w836x7hg Consumer Infrared Transceiver" 286 depends on PNP || COMPILE_TEST 287 depends on RC_CORE 288 ---help--- 289 Say Y here to enable support for integrated infrared receiver 290 /transceiver made by Nuvoton (formerly Winbond). This chip is 291 found in the ASRock ION 330HT, as well as assorted Intel 292 DP55-series motherboards (and of course, possibly others). 293 294 To compile this driver as a module, choose M here: the 295 module will be called nuvoton-cir. 296 297config IR_REDRAT3 298 tristate "RedRat3 IR Transceiver" 299 depends on USB_ARCH_HAS_HCD 300 depends on RC_CORE 301 select NEW_LEDS 302 select LEDS_CLASS 303 select USB 304 ---help--- 305 Say Y here if you want to use a RedRat3 Infrared Transceiver. 306 307 To compile this driver as a module, choose M here: the 308 module will be called redrat3. 309 310config IR_SPI 311 tristate "SPI connected IR LED" 312 depends on SPI && LIRC 313 depends on OF || COMPILE_TEST 314 ---help--- 315 Say Y if you want to use an IR LED connected through SPI bus. 316 317 To compile this driver as a module, choose M here: the module will be 318 called ir-spi. 319 320config IR_STREAMZAP 321 tristate "Streamzap PC Remote IR Receiver" 322 depends on USB_ARCH_HAS_HCD 323 depends on RC_CORE 324 select USB 325 ---help--- 326 Say Y here if you want to use a Streamzap PC Remote 327 Infrared Receiver. 328 329 To compile this driver as a module, choose M here: the 330 module will be called streamzap. 331 332config IR_WINBOND_CIR 333 tristate "Winbond IR remote control" 334 depends on (X86 && PNP) || COMPILE_TEST 335 depends on RC_CORE 336 select NEW_LEDS 337 select LEDS_CLASS 338 select BITREVERSE 339 ---help--- 340 Say Y here if you want to use the IR remote functionality found 341 in some Winbond SuperI/O chips. Currently only the WPCD376I 342 chip is supported (included in some Intel Media series 343 motherboards). 344 345 To compile this driver as a module, choose M here: the module will 346 be called winbond_cir. 347 348config IR_IGORPLUGUSB 349 tristate "IgorPlug-USB IR Receiver" 350 depends on USB_ARCH_HAS_HCD 351 depends on RC_CORE 352 select USB 353 ---help--- 354 Say Y here if you want to use the IgorPlug-USB IR Receiver by 355 Igor Cesko. This device is included on the Fit-PC2. 356 357 Note that this device can only record bursts of 36 IR pulses and 358 spaces, which is not enough for the NEC, Sanyo and RC-6 protocol. 359 360 To compile this driver as a module, choose M here: the module will 361 be called igorplugusb. 362 363config IR_IGUANA 364 tristate "IguanaWorks USB IR Transceiver" 365 depends on USB_ARCH_HAS_HCD 366 depends on RC_CORE 367 select USB 368 ---help--- 369 Say Y here if you want to use the IguanaWorks USB IR Transceiver. 370 Both infrared receive and send are supported. If you want to 371 change the ID or the pin config, use the user space driver from 372 IguanaWorks. 373 374 Only firmware 0x0205 and later is supported. 375 376 To compile this driver as a module, choose M here: the module will 377 be called iguanair. 378 379config IR_TTUSBIR 380 tristate "TechnoTrend USB IR Receiver" 381 depends on USB_ARCH_HAS_HCD 382 depends on RC_CORE 383 select USB 384 select NEW_LEDS 385 select LEDS_CLASS 386 ---help--- 387 Say Y here if you want to use the TechnoTrend USB IR Receiver. The 388 driver can control the led. 389 390 To compile this driver as a module, choose M here: the module will 391 be called ttusbir. 392 393config IR_RX51 394 tristate "Nokia N900 IR transmitter diode" 395 depends on (OMAP_DM_TIMER && PWM_OMAP_DMTIMER && ARCH_OMAP2PLUS || COMPILE_TEST) && RC_CORE 396 ---help--- 397 Say Y or M here if you want to enable support for the IR 398 transmitter diode built in the Nokia N900 (RX51) device. 399 400 The driver uses omap DM timers for generating the carrier 401 wave and pulses. 402 403source "drivers/media/rc/img-ir/Kconfig" 404 405config RC_LOOPBACK 406 tristate "Remote Control Loopback Driver" 407 depends on RC_CORE 408 ---help--- 409 Say Y here if you want support for the remote control loopback 410 driver which allows TX data to be sent back as RX data. 411 This is mostly useful for debugging purposes. 412 413 If you're not sure, select N here. 414 415 To compile this driver as a module, choose M here: the module will 416 be called rc_loopback. 417 418config IR_GPIO_CIR 419 tristate "GPIO IR remote control" 420 depends on RC_CORE 421 depends on (OF && GPIOLIB) || COMPILE_TEST 422 ---help--- 423 Say Y if you want to use GPIO based IR Receiver. 424 425 To compile this driver as a module, choose M here: the module will 426 be called gpio-ir-recv. 427 428config IR_GPIO_TX 429 tristate "GPIO IR Bit Banging Transmitter" 430 depends on RC_CORE 431 depends on LIRC 432 depends on (OF && GPIOLIB) || COMPILE_TEST 433 ---help--- 434 Say Y if you want to a GPIO based IR transmitter. This is a 435 bit banging driver. 436 437 To compile this driver as a module, choose M here: the module will 438 be called gpio-ir-tx. 439 440config IR_PWM_TX 441 tristate "PWM IR transmitter" 442 depends on RC_CORE 443 depends on LIRC 444 depends on PWM 445 depends on OF || COMPILE_TEST 446 ---help--- 447 Say Y if you want to use a PWM based IR transmitter. This is 448 more power efficient than the bit banging gpio driver. 449 450 To compile this driver as a module, choose M here: the module will 451 be called pwm-ir-tx. 452 453config RC_ST 454 tristate "ST remote control receiver" 455 depends on RC_CORE 456 depends on ARCH_STI || COMPILE_TEST 457 ---help--- 458 Say Y here if you want support for ST remote control driver 459 which allows both IR and UHF RX. 460 The driver passes raw pulse and space information to the LIRC decoder. 461 462 If you're not sure, select N here. 463 464config IR_SUNXI 465 tristate "SUNXI IR remote control" 466 depends on RC_CORE 467 depends on ARCH_SUNXI || COMPILE_TEST 468 ---help--- 469 Say Y if you want to use sunXi internal IR Controller 470 471 To compile this driver as a module, choose M here: the module will 472 be called sunxi-ir. 473 474config IR_SERIAL 475 tristate "Homebrew Serial Port Receiver" 476 depends on RC_CORE 477 ---help--- 478 Say Y if you want to use Homebrew Serial Port Receivers and 479 Transceivers. 480 481 To compile this driver as a module, choose M here: the module will 482 be called serial-ir. 483 484config IR_SERIAL_TRANSMITTER 485 bool "Serial Port Transmitter" 486 depends on IR_SERIAL 487 ---help--- 488 Serial Port Transmitter support 489 490config IR_SIR 491 tristate "Built-in SIR IrDA port" 492 depends on RC_CORE 493 ---help--- 494 Say Y if you want to use a IrDA SIR port Transceivers. 495 496 To compile this driver as a module, choose M here: the module will 497 be called sir-ir. 498 499config IR_TANGO 500 tristate "Sigma Designs SMP86xx IR decoder" 501 depends on RC_CORE 502 depends on ARCH_TANGO || COMPILE_TEST 503 ---help--- 504 Adds support for the HW IR decoder embedded on Sigma Designs 505 Tango-based systems (SMP86xx, SMP87xx). 506 The HW decoder supports NEC, RC-5, RC-6 IR protocols. 507 When compiled as a module, look for tango-ir. 508 509config RC_XBOX_DVD 510 tristate "Xbox DVD Movie Playback Kit" 511 depends on RC_CORE 512 depends on USB_ARCH_HAS_HCD 513 select USB 514 help 515 Say Y here if you want to use the Xbox DVD Movie Playback Kit. 516 These are IR remotes with USB receivers for the Original Xbox (2001). 517 518 To compile this driver as a module, choose M here: the module will be 519 called xbox_remote. 520 521config IR_ZX 522 tristate "ZTE ZX IR remote control" 523 depends on RC_CORE 524 depends on ARCH_ZX || COMPILE_TEST 525 ---help--- 526 Say Y if you want to use the IR remote control available 527 on ZTE ZX family SoCs. 528 529 To compile this driver as a module, choose M here: the 530 module will be called zx-irdec. 531 532endif #RC_DEVICES 533 534endif #RC_CORE 535