1 /*
2  * GemTek radio card driver
3  *
4  * Copyright 1998 Jonas Munsin <jmunsin@iki.fi>
5  *
6  * GemTek hasn't released any specs on the card, so the protocol had to
7  * be reverse engineered with dosemu.
8  *
9  * Besides the protocol changes, this is mostly a copy of:
10  *
11  *    RadioTrack II driver for Linux radio support (C) 1998 Ben Pfaff
12  *
13  *    Based on RadioTrack I/RadioReveal (C) 1997 M. Kirkwood
14  *    Converted to new API by Alan Cox <alan@lxorguk.ukuu.org.uk>
15  *    Various bugfixes and enhancements by Russell Kroll <rkroll@exploits.org>
16  *
17  * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@cisco.com>
18  * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
19  *
20  * Note: this card seems to swap the left and right audio channels!
21  *
22  * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool.
23  */
24 
25 #include <linux/module.h>	/* Modules 			*/
26 #include <linux/init.h>		/* Initdata			*/
27 #include <linux/ioport.h>	/* request_region		*/
28 #include <linux/delay.h>	/* udelay			*/
29 #include <linux/videodev2.h>	/* kernel radio structs		*/
30 #include <linux/mutex.h>
31 #include <linux/io.h>		/* outb, outb_p			*/
32 #include <linux/pnp.h>
33 #include <linux/slab.h>
34 #include <media/v4l2-ioctl.h>
35 #include <media/v4l2-device.h>
36 #include "radio-isa.h"
37 
38 /*
39  * Module info.
40  */
41 
42 MODULE_AUTHOR("Jonas Munsin, Pekka Seppänen <pexu@kapsi.fi>");
43 MODULE_DESCRIPTION("A driver for the GemTek Radio card.");
44 MODULE_LICENSE("GPL");
45 MODULE_VERSION("1.0.0");
46 
47 /*
48  * Module params.
49  */
50 
51 #ifndef CONFIG_RADIO_GEMTEK_PORT
52 #define CONFIG_RADIO_GEMTEK_PORT -1
53 #endif
54 #ifndef CONFIG_RADIO_GEMTEK_PROBE
55 #define CONFIG_RADIO_GEMTEK_PROBE 1
56 #endif
57 
58 #define GEMTEK_MAX 4
59 
60 static bool probe = CONFIG_RADIO_GEMTEK_PROBE;
61 static bool hardmute;
62 static int io[GEMTEK_MAX] = { [0] = CONFIG_RADIO_GEMTEK_PORT,
63 			      [1 ... (GEMTEK_MAX - 1)] = -1 };
64 static int radio_nr[GEMTEK_MAX]	= { [0 ... (GEMTEK_MAX - 1)] = -1 };
65 
66 module_param(probe, bool, 0444);
67 MODULE_PARM_DESC(probe, "Enable automatic device probing.");
68 
69 module_param(hardmute, bool, 0644);
70 MODULE_PARM_DESC(hardmute, "Enable 'hard muting' by shutting down PLL, may reduce static noise.");
71 
72 module_param_array(io, int, NULL, 0444);
73 MODULE_PARM_DESC(io, "Force I/O ports for the GemTek Radio card if automatic probing is disabled or fails. The most common I/O ports are: 0x20c 0x30c, 0x24c or 0x34c (0x20c, 0x248 and 0x28c have been reported to work for the combined sound/radiocard).");
74 
75 module_param_array(radio_nr, int, NULL, 0444);
76 MODULE_PARM_DESC(radio_nr, "Radio device numbers");
77 
78 /*
79  * Frequency calculation constants.  Intermediate frequency 10.52 MHz (nominal
80  * value 10.7 MHz), reference divisor 6.39 kHz (nominal 6.25 kHz).
81  */
82 #define FSCALE		8
83 #define IF_OFFSET	((unsigned int)(10.52 * 16000 * (1<<FSCALE)))
84 #define REF_FREQ	((unsigned int)(6.39 * 16 * (1<<FSCALE)))
85 
86 #define GEMTEK_CK		0x01	/* Clock signal			*/
87 #define GEMTEK_DA		0x02	/* Serial data			*/
88 #define GEMTEK_CE		0x04	/* Chip enable			*/
89 #define GEMTEK_NS		0x08	/* No signal			*/
90 #define GEMTEK_MT		0x10	/* Line mute			*/
91 #define GEMTEK_STDF_3_125_KHZ	0x01	/* Standard frequency 3.125 kHz	*/
92 #define GEMTEK_PLL_OFF		0x07	/* PLL off			*/
93 
94 #define BU2614_BUS_SIZE	32	/* BU2614 / BU2614FS bus size		*/
95 
96 #define SHORT_DELAY 5		/* usec */
97 #define LONG_DELAY 75		/* usec */
98 
99 struct gemtek {
100 	struct radio_isa_card isa;
101 	bool muted;
102 	u32 bu2614data;
103 };
104 
105 #define BU2614_FREQ_BITS 	16 /* D0..D15, Frequency data		*/
106 #define BU2614_PORT_BITS	3 /* P0..P2, Output port control data	*/
107 #define BU2614_VOID_BITS	4 /* unused 				*/
108 #define BU2614_FMES_BITS	1 /* CT, Frequency measurement beginning data */
109 #define BU2614_STDF_BITS	3 /* R0..R2, Standard frequency data	*/
110 #define BU2614_SWIN_BITS	1 /* S, Switch between FMIN / AMIN	*/
111 #define BU2614_SWAL_BITS        1 /* PS, Swallow counter division (AMIN only)*/
112 #define BU2614_VOID2_BITS	1 /* unused				*/
113 #define BU2614_FMUN_BITS	1 /* GT, Frequency measurement time & unlock */
114 #define BU2614_TEST_BITS	1 /* TS, Test data is input		*/
115 
116 #define BU2614_FREQ_SHIFT 	0
117 #define BU2614_PORT_SHIFT	(BU2614_FREQ_BITS + BU2614_FREQ_SHIFT)
118 #define BU2614_VOID_SHIFT	(BU2614_PORT_BITS + BU2614_PORT_SHIFT)
119 #define BU2614_FMES_SHIFT	(BU2614_VOID_BITS + BU2614_VOID_SHIFT)
120 #define BU2614_STDF_SHIFT	(BU2614_FMES_BITS + BU2614_FMES_SHIFT)
121 #define BU2614_SWIN_SHIFT	(BU2614_STDF_BITS + BU2614_STDF_SHIFT)
122 #define BU2614_SWAL_SHIFT	(BU2614_SWIN_BITS + BU2614_SWIN_SHIFT)
123 #define BU2614_VOID2_SHIFT	(BU2614_SWAL_BITS + BU2614_SWAL_SHIFT)
124 #define BU2614_FMUN_SHIFT	(BU2614_VOID2_BITS + BU2614_VOID2_SHIFT)
125 #define BU2614_TEST_SHIFT	(BU2614_FMUN_BITS + BU2614_FMUN_SHIFT)
126 
127 #define MKMASK(field)	(((1<<BU2614_##field##_BITS) - 1) << \
128 			BU2614_##field##_SHIFT)
129 #define BU2614_PORT_MASK	MKMASK(PORT)
130 #define BU2614_FREQ_MASK	MKMASK(FREQ)
131 #define BU2614_VOID_MASK	MKMASK(VOID)
132 #define BU2614_FMES_MASK	MKMASK(FMES)
133 #define BU2614_STDF_MASK	MKMASK(STDF)
134 #define BU2614_SWIN_MASK	MKMASK(SWIN)
135 #define BU2614_SWAL_MASK	MKMASK(SWAL)
136 #define BU2614_VOID2_MASK	MKMASK(VOID2)
137 #define BU2614_FMUN_MASK	MKMASK(FMUN)
138 #define BU2614_TEST_MASK	MKMASK(TEST)
139 
140 /*
141  * Set data which will be sent to BU2614FS.
142  */
143 #define gemtek_bu2614_set(dev, field, data) ((dev)->bu2614data = \
144 	((dev)->bu2614data & ~field##_MASK) | ((data) << field##_SHIFT))
145 
146 /*
147  * Transmit settings to BU2614FS over GemTek IC.
148  */
149 static void gemtek_bu2614_transmit(struct gemtek *gt)
150 {
151 	struct radio_isa_card *isa = &gt->isa;
152 	int i, bit, q, mute;
153 
154 	mute = gt->muted ? GEMTEK_MT : 0x00;
155 
156 	outb_p(mute | GEMTEK_CE | GEMTEK_DA | GEMTEK_CK, isa->io);
157 	udelay(LONG_DELAY);
158 
159 	for (i = 0, q = gt->bu2614data; i < 32; i++, q >>= 1) {
160 		bit = (q & 1) ? GEMTEK_DA : 0;
161 		outb_p(mute | GEMTEK_CE | bit, isa->io);
162 		udelay(SHORT_DELAY);
163 		outb_p(mute | GEMTEK_CE | bit | GEMTEK_CK, isa->io);
164 		udelay(SHORT_DELAY);
165 	}
166 
167 	outb_p(mute | GEMTEK_DA | GEMTEK_CK, isa->io);
168 	udelay(SHORT_DELAY);
169 }
170 
171 /*
172  * Calculate divisor from FM-frequency for BU2614FS (3.125 KHz STDF expected).
173  */
174 static unsigned long gemtek_convfreq(unsigned long freq)
175 {
176 	return ((freq << FSCALE) + IF_OFFSET + REF_FREQ / 2) / REF_FREQ;
177 }
178 
179 static struct radio_isa_card *gemtek_alloc(void)
180 {
181 	struct gemtek *gt = kzalloc(sizeof(*gt), GFP_KERNEL);
182 
183 	if (gt)
184 		gt->muted = true;
185 	return gt ? &gt->isa : NULL;
186 }
187 
188 /*
189  * Set FM-frequency.
190  */
191 static int gemtek_s_frequency(struct radio_isa_card *isa, u32 freq)
192 {
193 	struct gemtek *gt = container_of(isa, struct gemtek, isa);
194 
195 	if (hardmute && gt->muted)
196 		return 0;
197 
198 	gemtek_bu2614_set(gt, BU2614_PORT, 0);
199 	gemtek_bu2614_set(gt, BU2614_FMES, 0);
200 	gemtek_bu2614_set(gt, BU2614_SWIN, 0);	/* FM-mode	*/
201 	gemtek_bu2614_set(gt, BU2614_SWAL, 0);
202 	gemtek_bu2614_set(gt, BU2614_FMUN, 1);	/* GT bit set	*/
203 	gemtek_bu2614_set(gt, BU2614_TEST, 0);
204 	gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_STDF_3_125_KHZ);
205 	gemtek_bu2614_set(gt, BU2614_FREQ, gemtek_convfreq(freq));
206 	gemtek_bu2614_transmit(gt);
207 	return 0;
208 }
209 
210 /*
211  * Set mute flag.
212  */
213 static int gemtek_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
214 {
215 	struct gemtek *gt = container_of(isa, struct gemtek, isa);
216 	int i;
217 
218 	gt->muted = mute;
219 	if (hardmute) {
220 		if (!mute)
221 			return gemtek_s_frequency(isa, isa->freq);
222 
223 		/* Turn off PLL, disable data output */
224 		gemtek_bu2614_set(gt, BU2614_PORT, 0);
225 		gemtek_bu2614_set(gt, BU2614_FMES, 0);	/* CT bit off	*/
226 		gemtek_bu2614_set(gt, BU2614_SWIN, 0);	/* FM-mode	*/
227 		gemtek_bu2614_set(gt, BU2614_SWAL, 0);
228 		gemtek_bu2614_set(gt, BU2614_FMUN, 0);	/* GT bit off	*/
229 		gemtek_bu2614_set(gt, BU2614_TEST, 0);
230 		gemtek_bu2614_set(gt, BU2614_STDF, GEMTEK_PLL_OFF);
231 		gemtek_bu2614_set(gt, BU2614_FREQ, 0);
232 		gemtek_bu2614_transmit(gt);
233 		return 0;
234 	}
235 
236 	/* Read bus contents (CE, CK and DA). */
237 	i = inb_p(isa->io);
238 	/* Write it back with mute flag set. */
239 	outb_p((i >> 5) | (mute ? GEMTEK_MT : 0), isa->io);
240 	udelay(SHORT_DELAY);
241 	return 0;
242 }
243 
244 static u32 gemtek_g_rxsubchans(struct radio_isa_card *isa)
245 {
246 	if (inb_p(isa->io) & GEMTEK_NS)
247 		return V4L2_TUNER_SUB_MONO;
248 	return V4L2_TUNER_SUB_STEREO;
249 }
250 
251 /*
252  * Check if requested card acts like GemTek Radio card.
253  */
254 static bool gemtek_probe(struct radio_isa_card *isa, int io)
255 {
256 	int i, q;
257 
258 	q = inb_p(io);	/* Read bus contents before probing. */
259 	/* Try to turn on CE, CK and DA respectively and check if card responds
260 	   properly. */
261 	for (i = 0; i < 3; ++i) {
262 		outb_p(1 << i, io);
263 		udelay(SHORT_DELAY);
264 
265 		if ((inb_p(io) & ~GEMTEK_NS) != (0x17 | (1 << (i + 5))))
266 			return false;
267 	}
268 	outb_p(q >> 5, io);	/* Write bus contents back. */
269 	udelay(SHORT_DELAY);
270 	return true;
271 }
272 
273 static const struct radio_isa_ops gemtek_ops = {
274 	.alloc = gemtek_alloc,
275 	.probe = gemtek_probe,
276 	.s_mute_volume = gemtek_s_mute_volume,
277 	.s_frequency = gemtek_s_frequency,
278 	.g_rxsubchans = gemtek_g_rxsubchans,
279 };
280 
281 static const int gemtek_ioports[] = { 0x20c, 0x30c, 0x24c, 0x34c, 0x248, 0x28c };
282 
283 #ifdef CONFIG_PNP
284 static const struct pnp_device_id gemtek_pnp_devices[] = {
285 	/* AOpen FX-3D/Pro Radio */
286 	{.id = "ADS7183", .driver_data = 0},
287 	{.id = ""}
288 };
289 
290 MODULE_DEVICE_TABLE(pnp, gemtek_pnp_devices);
291 #endif
292 
293 static struct radio_isa_driver gemtek_driver = {
294 	.driver = {
295 		.match		= radio_isa_match,
296 		.probe		= radio_isa_probe,
297 		.remove		= radio_isa_remove,
298 		.driver		= {
299 			.name	= "radio-gemtek",
300 		},
301 	},
302 #ifdef CONFIG_PNP
303 	.pnp_driver = {
304 		.name		= "radio-gemtek",
305 		.id_table	= gemtek_pnp_devices,
306 		.probe		= radio_isa_pnp_probe,
307 		.remove		= radio_isa_pnp_remove,
308 	},
309 #endif
310 	.io_params = io,
311 	.radio_nr_params = radio_nr,
312 	.io_ports = gemtek_ioports,
313 	.num_of_io_ports = ARRAY_SIZE(gemtek_ioports),
314 	.region_size = 1,
315 	.card = "GemTek Radio",
316 	.ops = &gemtek_ops,
317 	.has_stereo = true,
318 };
319 
320 static int __init gemtek_init(void)
321 {
322 	gemtek_driver.probe = probe;
323 #ifdef CONFIG_PNP
324 	pnp_register_driver(&gemtek_driver.pnp_driver);
325 #endif
326 	return isa_register_driver(&gemtek_driver.driver, GEMTEK_MAX);
327 }
328 
329 static void __exit gemtek_exit(void)
330 {
331 	hardmute = true;	/* Turn off PLL */
332 #ifdef CONFIG_PNP
333 	pnp_unregister_driver(&gemtek_driver.pnp_driver);
334 #endif
335 	isa_unregister_driver(&gemtek_driver.driver);
336 }
337 
338 module_init(gemtek_init);
339 module_exit(gemtek_exit);
340