1 /*
2  * radio-aztech.c - Aztech radio card driver
3  *
4  * Converted to the radio-isa framework by Hans Verkuil <hans.verkuil@xs4all.nl>
5  * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
6  * Adapted to support the Video for Linux API by
7  * Russell Kroll <rkroll@exploits.org>.  Based on original tuner code by:
8  *
9  * Quay Ly
10  * Donald Song
11  * Jason Lewis      (jlewis@twilight.vtc.vsc.edu)
12  * Scott McGrath    (smcgrath@twilight.vtc.vsc.edu)
13  * William McGrath  (wmcgrath@twilight.vtc.vsc.edu)
14  *
15  * Fully tested with the Keene USB FM Transmitter and the v4l2-compliance tool.
16 */
17 
18 #include <linux/module.h>	/* Modules			*/
19 #include <linux/init.h>		/* Initdata			*/
20 #include <linux/ioport.h>	/* request_region		*/
21 #include <linux/delay.h>	/* udelay			*/
22 #include <linux/videodev2.h>	/* kernel radio structs		*/
23 #include <linux/io.h>		/* outb, outb_p			*/
24 #include <linux/slab.h>
25 #include <media/v4l2-device.h>
26 #include <media/v4l2-ioctl.h>
27 #include <media/v4l2-ctrls.h>
28 #include "radio-isa.h"
29 #include "lm7000.h"
30 
31 MODULE_AUTHOR("Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
32 MODULE_DESCRIPTION("A driver for the Aztech radio card.");
33 MODULE_LICENSE("GPL");
34 MODULE_VERSION("1.0.0");
35 
36 /* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */
37 #ifndef CONFIG_RADIO_AZTECH_PORT
38 #define CONFIG_RADIO_AZTECH_PORT -1
39 #endif
40 
41 #define AZTECH_MAX 2
42 
43 static int io[AZTECH_MAX] = { [0] = CONFIG_RADIO_AZTECH_PORT,
44 			      [1 ... (AZTECH_MAX - 1)] = -1 };
45 static int radio_nr[AZTECH_MAX]	= { [0 ... (AZTECH_MAX - 1)] = -1 };
46 
47 module_param_array(io, int, NULL, 0444);
48 MODULE_PARM_DESC(io, "I/O addresses of the Aztech card (0x350 or 0x358)");
49 module_param_array(radio_nr, int, NULL, 0444);
50 MODULE_PARM_DESC(radio_nr, "Radio device numbers");
51 
52 struct aztech {
53 	struct radio_isa_card isa;
54 	int curvol;
55 };
56 
57 /* bit definitions for register read */
58 #define AZTECH_BIT_NOT_TUNED	(1 << 0)
59 #define AZTECH_BIT_MONO		(1 << 1)
60 /* bit definitions for register write */
61 #define AZTECH_BIT_TUN_CE	(1 << 1)
62 #define AZTECH_BIT_TUN_CLK	(1 << 6)
63 #define AZTECH_BIT_TUN_DATA	(1 << 7)
64 /* bits 0 and 2 are volume control, bits 3..5 are not connected */
65 
66 static void aztech_set_pins(void *handle, u8 pins)
67 {
68 	struct radio_isa_card *isa = handle;
69 	struct aztech *az = container_of(isa, struct aztech, isa);
70 	u8 bits = az->curvol;
71 
72 	if (pins & LM7000_DATA)
73 		bits |= AZTECH_BIT_TUN_DATA;
74 	if (pins & LM7000_CLK)
75 		bits |= AZTECH_BIT_TUN_CLK;
76 	if (pins & LM7000_CE)
77 		bits |= AZTECH_BIT_TUN_CE;
78 
79 	outb_p(bits, az->isa.io);
80 }
81 
82 static struct radio_isa_card *aztech_alloc(void)
83 {
84 	struct aztech *az = kzalloc(sizeof(*az), GFP_KERNEL);
85 
86 	return az ? &az->isa : NULL;
87 }
88 
89 static int aztech_s_frequency(struct radio_isa_card *isa, u32 freq)
90 {
91 	lm7000_set_freq(freq, isa, aztech_set_pins);
92 
93 	return 0;
94 }
95 
96 static u32 aztech_g_rxsubchans(struct radio_isa_card *isa)
97 {
98 	if (inb(isa->io) & AZTECH_BIT_MONO)
99 		return V4L2_TUNER_SUB_MONO;
100 	return V4L2_TUNER_SUB_STEREO;
101 }
102 
103 static u32 aztech_g_signal(struct radio_isa_card *isa)
104 {
105 	return (inb(isa->io) & AZTECH_BIT_NOT_TUNED) ? 0 : 0xffff;
106 }
107 
108 static int aztech_s_mute_volume(struct radio_isa_card *isa, bool mute, int vol)
109 {
110 	struct aztech *az = container_of(isa, struct aztech, isa);
111 
112 	if (mute)
113 		vol = 0;
114 	az->curvol = (vol & 1) + ((vol & 2) << 1);
115 	outb(az->curvol, isa->io);
116 	return 0;
117 }
118 
119 static const struct radio_isa_ops aztech_ops = {
120 	.alloc = aztech_alloc,
121 	.s_mute_volume = aztech_s_mute_volume,
122 	.s_frequency = aztech_s_frequency,
123 	.g_rxsubchans = aztech_g_rxsubchans,
124 	.g_signal = aztech_g_signal,
125 };
126 
127 static const int aztech_ioports[] = { 0x350, 0x358 };
128 
129 static struct radio_isa_driver aztech_driver = {
130 	.driver = {
131 		.match		= radio_isa_match,
132 		.probe		= radio_isa_probe,
133 		.remove		= radio_isa_remove,
134 		.driver		= {
135 			.name	= "radio-aztech",
136 		},
137 	},
138 	.io_params = io,
139 	.radio_nr_params = radio_nr,
140 	.io_ports = aztech_ioports,
141 	.num_of_io_ports = ARRAY_SIZE(aztech_ioports),
142 	.region_size = 8,
143 	.card = "Aztech Radio",
144 	.ops = &aztech_ops,
145 	.has_stereo = true,
146 	.max_volume = 3,
147 };
148 
149 static int __init aztech_init(void)
150 {
151 	return isa_register_driver(&aztech_driver.driver, AZTECH_MAX);
152 }
153 
154 static void __exit aztech_exit(void)
155 {
156 	isa_unregister_driver(&aztech_driver.driver);
157 }
158 
159 module_init(aztech_init);
160 module_exit(aztech_exit);
161