1 /* radio-aztech.c - Aztech radio card driver for Linux 2.2
2  *
3  * Converted to V4L2 API by Mauro Carvalho Chehab <mchehab@infradead.org>
4  * Adapted to support the Video for Linux API by
5  * Russell Kroll <rkroll@exploits.org>.  Based on original tuner code by:
6  *
7  * Quay Ly
8  * Donald Song
9  * Jason Lewis      (jlewis@twilight.vtc.vsc.edu)
10  * Scott McGrath    (smcgrath@twilight.vtc.vsc.edu)
11  * William McGrath  (wmcgrath@twilight.vtc.vsc.edu)
12  *
13  * The basis for this code may be found at http://bigbang.vtc.vsc.edu/fmradio/
14  * along with more information on the card itself.
15  *
16  * History:
17  * 1999-02-24	Russell Kroll <rkroll@exploits.org>
18  *		Fine tuning/VIDEO_TUNER_LOW
19  * 		Range expanded to 87-108 MHz (from 87.9-107.8)
20  *
21  * Notable changes from the original source:
22  * - includes stripped down to the essentials
23  * - for loops used as delays replaced with udelay()
24  * - #defines removed, changed to static values
25  * - tuning structure changed - no more character arrays, other changes
26 */
27 
28 #include <linux/module.h>	/* Modules 			*/
29 #include <linux/init.h>		/* Initdata			*/
30 #include <linux/ioport.h>	/* request_region		*/
31 #include <linux/delay.h>	/* udelay			*/
32 #include <linux/videodev2.h>	/* kernel radio structs		*/
33 #include <linux/version.h>      /* for KERNEL_VERSION MACRO     */
34 #include <linux/io.h>		/* outb, outb_p			*/
35 #include <media/v4l2-device.h>
36 #include <media/v4l2-ioctl.h>
37 
38 MODULE_AUTHOR("Russell Kroll, Quay Lu, Donald Song, Jason Lewis, Scott McGrath, William McGrath");
39 MODULE_DESCRIPTION("A driver for the Aztech radio card.");
40 MODULE_LICENSE("GPL");
41 
42 /* acceptable ports: 0x350 (JP3 shorted), 0x358 (JP3 open) */
43 
44 #ifndef CONFIG_RADIO_AZTECH_PORT
45 #define CONFIG_RADIO_AZTECH_PORT -1
46 #endif
47 
48 static int io = CONFIG_RADIO_AZTECH_PORT;
49 static int radio_nr = -1;
50 static int radio_wait_time = 1000;
51 
52 module_param(io, int, 0);
53 module_param(radio_nr, int, 0);
54 MODULE_PARM_DESC(io, "I/O address of the Aztech card (0x350 or 0x358)");
55 
56 #define RADIO_VERSION KERNEL_VERSION(0, 0, 2)
57 
58 struct aztech
59 {
60 	struct v4l2_device v4l2_dev;
61 	struct video_device vdev;
62 	int io;
63 	int curvol;
64 	unsigned long curfreq;
65 	int stereo;
66 	struct mutex lock;
67 };
68 
69 static struct aztech aztech_card;
70 
71 static int volconvert(int level)
72 {
73 	level >>= 14;		/* Map 16bits down to 2 bit */
74 	level &= 3;
75 
76 	/* convert to card-friendly values */
77 	switch (level) {
78 	case 0:
79 		return 0;
80 	case 1:
81 		return 1;
82 	case 2:
83 		return 4;
84 	case 3:
85 		return 5;
86 	}
87 	return 0;	/* Quieten gcc */
88 }
89 
90 static void send_0_byte(struct aztech *az)
91 {
92 	udelay(radio_wait_time);
93 	outb_p(2 + volconvert(az->curvol), az->io);
94 	outb_p(64 + 2 + volconvert(az->curvol), az->io);
95 }
96 
97 static void send_1_byte(struct aztech *az)
98 {
99 	udelay (radio_wait_time);
100 	outb_p(128 + 2 + volconvert(az->curvol), az->io);
101 	outb_p(128 + 64 + 2 + volconvert(az->curvol), az->io);
102 }
103 
104 static int az_setvol(struct aztech *az, int vol)
105 {
106 	mutex_lock(&az->lock);
107 	outb(volconvert(vol), az->io);
108 	mutex_unlock(&az->lock);
109 	return 0;
110 }
111 
112 /* thanks to Michael Dwyer for giving me a dose of clues in
113  * the signal strength department..
114  *
115  * This card has a stereo bit - bit 0 set = mono, not set = stereo
116  * It also has a "signal" bit - bit 1 set = bad signal, not set = good
117  *
118  */
119 
120 static int az_getsigstr(struct aztech *az)
121 {
122 	int sig = 1;
123 
124 	mutex_lock(&az->lock);
125 	if (inb(az->io) & 2)	/* bit set = no signal present */
126 		sig = 0;
127 	mutex_unlock(&az->lock);
128 	return sig;
129 }
130 
131 static int az_getstereo(struct aztech *az)
132 {
133 	int stereo = 1;
134 
135 	mutex_lock(&az->lock);
136 	if (inb(az->io) & 1) 	/* bit set = mono */
137 		stereo = 0;
138 	mutex_unlock(&az->lock);
139 	return stereo;
140 }
141 
142 static int az_setfreq(struct aztech *az, unsigned long frequency)
143 {
144 	int  i;
145 
146 	mutex_lock(&az->lock);
147 
148 	az->curfreq = frequency;
149 	frequency += 171200;		/* Add 10.7 MHz IF		*/
150 	frequency /= 800;		/* Convert to 50 kHz units	*/
151 
152 	send_0_byte(az);		/*  0: LSB of frequency       */
153 
154 	for (i = 0; i < 13; i++)	/*   : frequency bits (1-13)  */
155 		if (frequency & (1 << i))
156 			send_1_byte(az);
157 		else
158 			send_0_byte(az);
159 
160 	send_0_byte(az);		/* 14: test bit - always 0    */
161 	send_0_byte(az);		/* 15: test bit - always 0    */
162 	send_0_byte(az);		/* 16: band data 0 - always 0 */
163 	if (az->stereo)		/* 17: stereo (1 to enable)   */
164 		send_1_byte(az);
165 	else
166 		send_0_byte(az);
167 
168 	send_1_byte(az);		/* 18: band data 1 - unknown  */
169 	send_0_byte(az);		/* 19: time base - always 0   */
170 	send_0_byte(az);		/* 20: spacing (0 = 25 kHz)   */
171 	send_1_byte(az);		/* 21: spacing (1 = 25 kHz)   */
172 	send_0_byte(az);		/* 22: spacing (0 = 25 kHz)   */
173 	send_1_byte(az);		/* 23: AM/FM (FM = 1, always) */
174 
175 	/* latch frequency */
176 
177 	udelay(radio_wait_time);
178 	outb_p(128 + 64 + volconvert(az->curvol), az->io);
179 
180 	mutex_unlock(&az->lock);
181 
182 	return 0;
183 }
184 
185 static int vidioc_querycap(struct file *file, void  *priv,
186 					struct v4l2_capability *v)
187 {
188 	strlcpy(v->driver, "radio-aztech", sizeof(v->driver));
189 	strlcpy(v->card, "Aztech Radio", sizeof(v->card));
190 	strlcpy(v->bus_info, "ISA", sizeof(v->bus_info));
191 	v->version = RADIO_VERSION;
192 	v->capabilities = V4L2_CAP_TUNER | V4L2_CAP_RADIO;
193 	return 0;
194 }
195 
196 static int vidioc_g_tuner(struct file *file, void *priv,
197 				struct v4l2_tuner *v)
198 {
199 	struct aztech *az = video_drvdata(file);
200 
201 	if (v->index > 0)
202 		return -EINVAL;
203 
204 	strlcpy(v->name, "FM", sizeof(v->name));
205 	v->type = V4L2_TUNER_RADIO;
206 
207 	v->rangelow = 87 * 16000;
208 	v->rangehigh = 108 * 16000;
209 	v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
210 	v->capability = V4L2_TUNER_CAP_LOW;
211 	if (az_getstereo(az))
212 		v->audmode = V4L2_TUNER_MODE_STEREO;
213 	else
214 		v->audmode = V4L2_TUNER_MODE_MONO;
215 	v->signal = 0xFFFF * az_getsigstr(az);
216 
217 	return 0;
218 }
219 
220 static int vidioc_s_tuner(struct file *file, void *priv,
221 				struct v4l2_tuner *v)
222 {
223 	return v->index ? -EINVAL : 0;
224 }
225 
226 static int vidioc_g_input(struct file *filp, void *priv, unsigned int *i)
227 {
228 	*i = 0;
229 	return 0;
230 }
231 
232 static int vidioc_s_input(struct file *filp, void *priv, unsigned int i)
233 {
234 	return i ? -EINVAL : 0;
235 }
236 
237 static int vidioc_g_audio(struct file *file, void *priv,
238 			   struct v4l2_audio *a)
239 {
240 	a->index = 0;
241 	strlcpy(a->name, "Radio", sizeof(a->name));
242 	a->capability = V4L2_AUDCAP_STEREO;
243 	return 0;
244 }
245 
246 static int vidioc_s_audio(struct file *file, void *priv,
247 			   struct v4l2_audio *a)
248 {
249 	return a->index ? -EINVAL : 0;
250 }
251 
252 static int vidioc_s_frequency(struct file *file, void *priv,
253 				struct v4l2_frequency *f)
254 {
255 	struct aztech *az = video_drvdata(file);
256 
257 	az_setfreq(az, f->frequency);
258 	return 0;
259 }
260 
261 static int vidioc_g_frequency(struct file *file, void *priv,
262 				struct v4l2_frequency *f)
263 {
264 	struct aztech *az = video_drvdata(file);
265 
266 	f->type = V4L2_TUNER_RADIO;
267 	f->frequency = az->curfreq;
268 	return 0;
269 }
270 
271 static int vidioc_queryctrl(struct file *file, void *priv,
272 			    struct v4l2_queryctrl *qc)
273 {
274 	switch (qc->id) {
275 	case V4L2_CID_AUDIO_MUTE:
276 		return v4l2_ctrl_query_fill(qc, 0, 1, 1, 1);
277 	case V4L2_CID_AUDIO_VOLUME:
278 		return v4l2_ctrl_query_fill(qc, 0, 0xff, 1, 0xff);
279 	}
280 	return -EINVAL;
281 }
282 
283 static int vidioc_g_ctrl(struct file *file, void *priv,
284 			    struct v4l2_control *ctrl)
285 {
286 	struct aztech *az = video_drvdata(file);
287 
288 	switch (ctrl->id) {
289 	case V4L2_CID_AUDIO_MUTE:
290 		if (az->curvol == 0)
291 			ctrl->value = 1;
292 		else
293 			ctrl->value = 0;
294 		return 0;
295 	case V4L2_CID_AUDIO_VOLUME:
296 		ctrl->value = az->curvol * 6554;
297 		return 0;
298 	}
299 	return -EINVAL;
300 }
301 
302 static int vidioc_s_ctrl(struct file *file, void *priv,
303 			    struct v4l2_control *ctrl)
304 {
305 	struct aztech *az = video_drvdata(file);
306 
307 	switch (ctrl->id) {
308 	case V4L2_CID_AUDIO_MUTE:
309 		if (ctrl->value)
310 			az_setvol(az, 0);
311 		else
312 			az_setvol(az, az->curvol);
313 		return 0;
314 	case V4L2_CID_AUDIO_VOLUME:
315 		az_setvol(az, ctrl->value);
316 		return 0;
317 	}
318 	return -EINVAL;
319 }
320 
321 static const struct v4l2_file_operations aztech_fops = {
322 	.owner		= THIS_MODULE,
323 	.ioctl		= video_ioctl2,
324 };
325 
326 static const struct v4l2_ioctl_ops aztech_ioctl_ops = {
327 	.vidioc_querycap    = vidioc_querycap,
328 	.vidioc_g_tuner     = vidioc_g_tuner,
329 	.vidioc_s_tuner     = vidioc_s_tuner,
330 	.vidioc_g_audio     = vidioc_g_audio,
331 	.vidioc_s_audio     = vidioc_s_audio,
332 	.vidioc_g_input     = vidioc_g_input,
333 	.vidioc_s_input     = vidioc_s_input,
334 	.vidioc_g_frequency = vidioc_g_frequency,
335 	.vidioc_s_frequency = vidioc_s_frequency,
336 	.vidioc_queryctrl   = vidioc_queryctrl,
337 	.vidioc_g_ctrl      = vidioc_g_ctrl,
338 	.vidioc_s_ctrl      = vidioc_s_ctrl,
339 };
340 
341 static int __init aztech_init(void)
342 {
343 	struct aztech *az = &aztech_card;
344 	struct v4l2_device *v4l2_dev = &az->v4l2_dev;
345 	int res;
346 
347 	strlcpy(v4l2_dev->name, "aztech", sizeof(v4l2_dev->name));
348 	az->io = io;
349 
350 	if (az->io == -1) {
351 		v4l2_err(v4l2_dev, "you must set an I/O address with io=0x350 or 0x358\n");
352 		return -EINVAL;
353 	}
354 
355 	if (!request_region(az->io, 2, "aztech")) {
356 		v4l2_err(v4l2_dev, "port 0x%x already in use\n", az->io);
357 		return -EBUSY;
358 	}
359 
360 	res = v4l2_device_register(NULL, v4l2_dev);
361 	if (res < 0) {
362 		release_region(az->io, 2);
363 		v4l2_err(v4l2_dev, "Could not register v4l2_device\n");
364 		return res;
365 	}
366 
367 	mutex_init(&az->lock);
368 	strlcpy(az->vdev.name, v4l2_dev->name, sizeof(az->vdev.name));
369 	az->vdev.v4l2_dev = v4l2_dev;
370 	az->vdev.fops = &aztech_fops;
371 	az->vdev.ioctl_ops = &aztech_ioctl_ops;
372 	az->vdev.release = video_device_release_empty;
373 	video_set_drvdata(&az->vdev, az);
374 
375 	if (video_register_device(&az->vdev, VFL_TYPE_RADIO, radio_nr) < 0) {
376 		v4l2_device_unregister(v4l2_dev);
377 		release_region(az->io, 2);
378 		return -EINVAL;
379 	}
380 
381 	v4l2_info(v4l2_dev, "Aztech radio card driver v1.00/19990224 rkroll@exploits.org\n");
382 	/* mute card - prevents noisy bootups */
383 	outb(0, az->io);
384 	return 0;
385 }
386 
387 static void __exit aztech_exit(void)
388 {
389 	struct aztech *az = &aztech_card;
390 
391 	video_unregister_device(&az->vdev);
392 	v4l2_device_unregister(&az->v4l2_dev);
393 	release_region(az->io, 2);
394 }
395 
396 module_init(aztech_init);
397 module_exit(aztech_exit);
398