1# 2# Multimedia Video device configuration 3# 4 5menuconfig RADIO_ADAPTERS 6 bool "Radio Adapters" 7 depends on VIDEO_V4L2 8 default y 9 ---help--- 10 Say Y here to enable selecting AM/FM radio adapters. 11 12if RADIO_ADAPTERS && VIDEO_V4L2 13 14config RADIO_SI470X 15 bool "Silicon Labs Si470x FM Radio Receiver support" 16 depends on VIDEO_V4L2 17 18source "drivers/media/radio/si470x/Kconfig" 19 20config USB_MR800 21 tristate "AverMedia MR 800 USB FM radio support" 22 depends on USB && VIDEO_V4L2 23 ---help--- 24 Say Y here if you want to connect this type of radio to your 25 computer's USB port. Note that the audio is not digital, and 26 you must connect the line out connector to a sound card or a 27 set of speakers. 28 29 To compile this driver as a module, choose M here: the 30 module will be called radio-mr800. 31 32config USB_DSBR 33 tristate "D-Link/GemTek USB FM radio support" 34 depends on USB && VIDEO_V4L2 35 ---help--- 36 Say Y here if you want to connect this type of radio to your 37 computer's USB port. Note that the audio is not digital, and 38 you must connect the line out connector to a sound card or a 39 set of speakers. 40 41 To compile this driver as a module, choose M here: the 42 module will be called dsbr100. 43 44config RADIO_MAXIRADIO 45 tristate "Guillemot MAXI Radio FM 2000 radio" 46 depends on VIDEO_V4L2 && PCI && SND 47 ---help--- 48 Choose Y here if you have this radio card. This card may also be 49 found as Gemtek PCI FM. 50 51 In order to control your radio card, you will need to use programs 52 that are compatible with the Video For Linux API. Information on 53 this API and pointers to "v4l" programs may be found at 54 <file:Documentation/video4linux/API.html>. 55 56 To compile this driver as a module, choose M here: the 57 module will be called radio-maxiradio. 58 59 60config I2C_SI4713 61 tristate "I2C driver for Silicon Labs Si4713 device" 62 depends on I2C && VIDEO_V4L2 63 ---help--- 64 Say Y here if you want support to Si4713 I2C device. 65 This device driver supports only i2c bus. 66 67 To compile this driver as a module, choose M here: the 68 module will be called si4713. 69 70config RADIO_SI4713 71 tristate "Silicon Labs Si4713 FM Radio Transmitter support" 72 depends on I2C && VIDEO_V4L2 73 select I2C_SI4713 74 ---help--- 75 Say Y here if you want support to Si4713 FM Radio Transmitter. 76 This device can transmit audio through FM. It can transmit 77 RDS and RBDS signals as well. This module is the v4l2 radio 78 interface for the i2c driver of this device. 79 80 To compile this driver as a module, choose M here: the 81 module will be called radio-si4713. 82 83config USB_KEENE 84 tristate "Keene FM Transmitter USB support" 85 depends on USB && VIDEO_V4L2 86 ---help--- 87 Say Y here if you want to connect this type of FM transmitter 88 to your computer's USB port. 89 90 To compile this driver as a module, choose M here: the 91 module will be called radio-keene. 92 93config RADIO_TEA5764 94 tristate "TEA5764 I2C FM radio support" 95 depends on I2C && VIDEO_V4L2 96 ---help--- 97 Say Y here if you want to use the TEA5764 FM chip found in 98 EZX phones. This FM chip is present in EZX phones from Motorola, 99 connected to internal pxa I2C bus. 100 101 To compile this driver as a module, choose M here: the 102 module will be called radio-tea5764. 103 104config RADIO_TEA5764_XTAL 105 bool "TEA5764 crystal reference" 106 depends on RADIO_TEA5764=y 107 default y 108 help 109 Say Y here if TEA5764 have a 32768 Hz crystal in circuit, say N 110 here if TEA5764 reference frequency is connected in FREQIN. 111 112config RADIO_SAA7706H 113 tristate "SAA7706H Car Radio DSP" 114 depends on I2C && VIDEO_V4L2 115 ---help--- 116 Say Y here if you want to use the SAA7706H Car radio Digital 117 Signal Processor, found for instance on the Russellville development 118 board. On the russellville the device is connected to internal 119 timberdale I2C bus. 120 121 To compile this driver as a module, choose M here: the 122 module will be called SAA7706H. 123 124config RADIO_TEF6862 125 tristate "TEF6862 Car Radio Enhanced Selectivity Tuner" 126 depends on I2C && VIDEO_V4L2 127 ---help--- 128 Say Y here if you want to use the TEF6862 Car Radio Enhanced 129 Selectivity Tuner, found for instance on the Russellville development 130 board. On the russellville the device is connected to internal 131 timberdale I2C bus. 132 133 To compile this driver as a module, choose M here: the 134 module will be called TEF6862. 135 136config RADIO_TIMBERDALE 137 tristate "Enable the Timberdale radio driver" 138 depends on MFD_TIMBERDALE && VIDEO_V4L2 139 depends on I2C # for RADIO_SAA7706H 140 select RADIO_TEF6862 141 select RADIO_SAA7706H 142 ---help--- 143 This is a kind of umbrella driver for the Radio Tuner and DSP 144 found behind the Timberdale FPGA on the Russellville board. 145 Enabling this driver will automatically select the DSP and tuner. 146 147config RADIO_WL1273 148 tristate "Texas Instruments WL1273 I2C FM Radio" 149 depends on I2C && VIDEO_V4L2 150 select MFD_CORE 151 select MFD_WL1273_CORE 152 select FW_LOADER 153 ---help--- 154 Choose Y here if you have this FM radio chip. 155 156 In order to control your radio card, you will need to use programs 157 that are compatible with the Video For Linux 2 API. Information on 158 this API and pointers to "v4l2" programs may be found at 159 <file:Documentation/video4linux/API.html>. 160 161 To compile this driver as a module, choose M here: the 162 module will be called radio-wl1273. 163 164# TI's ST based wl128x FM radio 165source "drivers/media/radio/wl128x/Kconfig" 166 167# 168# ISA drivers configuration 169# 170 171menuconfig V4L_RADIO_ISA_DRIVERS 172 bool "ISA radio devices" 173 depends on ISA 174 default n 175 ---help--- 176 Say Y here to enable support for these ISA drivers. 177 178if V4L_RADIO_ISA_DRIVERS 179 180config RADIO_ISA 181 depends on ISA 182 tristate 183 184config RADIO_CADET 185 tristate "ADS Cadet AM/FM Tuner" 186 depends on ISA && VIDEO_V4L2 187 ---help--- 188 Choose Y here if you have one of these AM/FM radio cards, and then 189 fill in the port address below. 190 191 To compile this driver as a module, choose M here: the 192 module will be called radio-cadet. 193 194config RADIO_LM7000 195 tristate 196 197config RADIO_RTRACK 198 tristate "AIMSlab RadioTrack (aka RadioReveal) support" 199 depends on ISA && VIDEO_V4L2 200 select RADIO_ISA 201 ---help--- 202 Choose Y here if you have one of these FM radio cards, and then fill 203 in the port address below. 204 205 Note that newer AIMSlab RadioTrack cards have a different chipset 206 and are not supported by this driver. For these cards, use the 207 RadioTrack II driver below. 208 209 If you have a GemTeks combined (PnP) sound- and radio card you must 210 use this driver as a module and setup the card with isapnptools. 211 You must also pass the module a suitable io parameter, 0x248 has 212 been reported to be used by these cards. 213 214 More information is contained in the file 215 <file:Documentation/video4linux/radiotrack.txt>. 216 217 To compile this driver as a module, choose M here: the 218 module will be called radio-aimslab. 219 220config RADIO_RTRACK_PORT 221 hex "RadioTrack i/o port (0x20f or 0x30f)" 222 depends on RADIO_RTRACK=y 223 default "30f" 224 help 225 Enter either 0x30f or 0x20f here. The card default is 0x30f, if you 226 haven't changed the jumper setting on the card. 227 228config RADIO_RTRACK2 229 tristate "AIMSlab RadioTrack II support" 230 depends on ISA && VIDEO_V4L2 231 select RADIO_ISA 232 ---help--- 233 Choose Y here if you have this FM radio card, and then fill in the 234 port address below. 235 236 Note: this driver hasn't been tested since a long time due to lack 237 of hardware. If you have this hardware, then please contact the 238 linux-media mailinglist. 239 240 To compile this driver as a module, choose M here: the 241 module will be called radio-rtrack2. 242 243config RADIO_RTRACK2_PORT 244 hex "RadioTrack II i/o port (0x20c or 0x30c)" 245 depends on RADIO_RTRACK2=y 246 default "30c" 247 help 248 Enter either 0x30c or 0x20c here. The card default is 0x30c, if you 249 haven't changed the jumper setting on the card. 250 251config RADIO_AZTECH 252 tristate "Aztech/Packard Bell Radio" 253 depends on ISA && VIDEO_V4L2 254 select RADIO_ISA 255 ---help--- 256 Choose Y here if you have one of these FM radio cards, and then fill 257 in the port address below. 258 259 To compile this driver as a module, choose M here: the 260 module will be called radio-aztech. 261 262config RADIO_AZTECH_PORT 263 hex "Aztech/Packard Bell I/O port (0x350 or 0x358)" 264 depends on RADIO_AZTECH=y 265 default "350" 266 help 267 Enter either 0x350 or 0x358 here. The card default is 0x350, if you 268 haven't changed the setting of jumper JP3 on the card. Removing the 269 jumper sets the card to 0x358. 270 271config RADIO_GEMTEK 272 tristate "GemTek Radio card (or compatible) support" 273 depends on ISA && VIDEO_V4L2 274 select RADIO_ISA 275 ---help--- 276 Choose Y here if you have this FM radio card, and then fill in the 277 I/O port address and settings below. The following cards either have 278 GemTek Radio tuner or are rebranded GemTek Radio cards: 279 280 - Sound Vision 16 Gold with FM Radio 281 - Typhoon Radio card (some models) 282 - Hama Radio card 283 284 To compile this driver as a module, choose M here: the 285 module will be called radio-gemtek. 286 287config RADIO_GEMTEK_PORT 288 hex "Fixed I/O port (0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c)" 289 depends on RADIO_GEMTEK=y 290 default "34c" 291 help 292 Enter either 0x20c, 0x30c, 0x24c, 0x34c, 0x248 or 0x28c here. The 293 card default is 0x34c, if you haven't changed the jumper setting 294 on the card. 295 296 On Sound Vision 16 Gold PnP with FM Radio (ESS1869+FM Gemtek), the I/O 297 port is 0x20c, 0x248 or 0x28c. 298 299 If automatic I/O port probing is enabled this port will be used only 300 in case of automatic probing failure, ie. as a fallback. 301 302config RADIO_GEMTEK_PROBE 303 bool "Automatic I/O port probing" 304 depends on RADIO_GEMTEK=y 305 default y 306 help 307 Say Y here to enable automatic probing for GemTek Radio card. The 308 following ports will be probed: 0x20c, 0x30c, 0x24c, 0x34c, 0x248 and 309 0x28c. 310 311config RADIO_MIROPCM20 312 tristate "miroSOUND PCM20 radio" 313 depends on ISA && ISA_DMA_API && VIDEO_V4L2 && SND 314 select SND_ISA 315 select SND_MIRO 316 ---help--- 317 Choose Y here if you have this FM radio card. You also need to enable 318 the ALSA sound system. This choice automatically selects the ALSA 319 sound card driver "Miro miroSOUND PCM1pro/PCM12/PCM20radio" as this 320 is required for the radio-miropcm20. 321 322 To compile this driver as a module, choose M here: the 323 module will be called radio-miropcm20. 324 325config RADIO_SF16FMI 326 tristate "SF16-FMI/SF16-FMP/SF16-FMD Radio" 327 depends on ISA && VIDEO_V4L2 328 ---help--- 329 Choose Y here if you have one of these FM radio cards. 330 331 To compile this driver as a module, choose M here: the 332 module will be called radio-sf16fmi. 333 334config RADIO_SF16FMR2 335 tristate "SF16-FMR2/SF16-FMD2 Radio" 336 depends on ISA && VIDEO_V4L2 && SND 337 ---help--- 338 Choose Y here if you have one of these FM radio cards. 339 340 To compile this driver as a module, choose M here: the 341 module will be called radio-sf16fmr2. 342 343config RADIO_TERRATEC 344 tristate "TerraTec ActiveRadio ISA Standalone" 345 depends on ISA && VIDEO_V4L2 346 select RADIO_ISA 347 ---help--- 348 Choose Y here if you have this FM radio card. 349 350 Note: this driver hasn't been tested since a long time due to lack 351 of hardware. If you have this hardware, then please contact the 352 linux-media mailinglist. 353 354 To compile this driver as a module, choose M here: the 355 module will be called radio-terratec. 356 357config RADIO_TRUST 358 tristate "Trust FM radio card" 359 depends on ISA && VIDEO_V4L2 360 select RADIO_ISA 361 help 362 This is a driver for the Trust FM radio cards. Say Y if you have 363 such a card and want to use it under Linux. 364 365 Note: this driver hasn't been tested since a long time due to lack 366 of hardware. If you have this hardware, then please contact the 367 linux-media mailinglist. 368 369 To compile this driver as a module, choose M here: the 370 module will be called radio-trust. 371 372config RADIO_TRUST_PORT 373 hex "Trust i/o port (usually 0x350 or 0x358)" 374 depends on RADIO_TRUST=y 375 default "350" 376 help 377 Enter the I/O port of your Trust FM radio card. If unsure, try the 378 values "0x350" or "0x358". 379 380config RADIO_TYPHOON 381 tristate "Typhoon Radio (a.k.a. EcoRadio)" 382 depends on ISA && VIDEO_V4L2 383 select RADIO_ISA 384 ---help--- 385 Choose Y here if you have one of these FM radio cards, and then fill 386 in the port address and the frequency used for muting below. 387 388 Note: this driver hasn't been tested since a long time due to lack 389 of hardware. If you have this hardware, then please contact the 390 linux-media mailinglist. 391 392 To compile this driver as a module, choose M here: the 393 module will be called radio-typhoon. 394 395config RADIO_TYPHOON_PORT 396 hex "Typhoon I/O port (0x316 or 0x336)" 397 depends on RADIO_TYPHOON=y 398 default "316" 399 help 400 Enter the I/O port of your Typhoon or EcoRadio radio card. 401 402config RADIO_TYPHOON_MUTEFREQ 403 int "Typhoon frequency set when muting the device (kHz)" 404 depends on RADIO_TYPHOON=y 405 default "87500" 406 help 407 Enter the frequency used for muting the radio. The device is never 408 completely silent. If the volume is just turned down, you can still 409 hear silent voices and music. For that reason, the frequency of the 410 radio device is set to the frequency you can enter here whenever 411 the device is muted. There should be no local radio station at that 412 frequency. 413 414config RADIO_ZOLTRIX 415 tristate "Zoltrix Radio" 416 depends on ISA && VIDEO_V4L2 417 select RADIO_ISA 418 ---help--- 419 Choose Y here if you have one of these FM radio cards, and then fill 420 in the port address below. 421 422 Note: this driver hasn't been tested since a long time due to lack 423 of hardware. If you have this hardware, then please contact the 424 linux-media mailinglist. 425 426 To compile this driver as a module, choose M here: the 427 module will be called radio-zoltrix. 428 429config RADIO_ZOLTRIX_PORT 430 hex "ZOLTRIX I/O port (0x20c or 0x30c)" 431 depends on RADIO_ZOLTRIX=y 432 default "20c" 433 help 434 Enter the I/O port of your Zoltrix radio card. 435 436endif # V4L_RADIO_ISA_DRIVERS 437 438endif # RADIO_ADAPTERS 439