1 /* 2 * vpif - Video Port Interface driver 3 * VPIF is a receiver and transmitter for video data. It has two channels(0, 1) 4 * that receiving video byte stream and two channels(2, 3) for video output. 5 * The hardware supports SDTV, HDTV formats, raw data capture. 6 * Currently, the driver supports NTSC and PAL standards. 7 * 8 * Copyright (C) 2009 Texas Instruments Incorporated - https://www.ti.com/ 9 * 10 * This program is free software; you can redistribute it and/or 11 * modify it under the terms of the GNU General Public License as 12 * published by the Free Software Foundation version 2. 13 * 14 * This program is distributed .as is. WITHOUT ANY WARRANTY of any 15 * kind, whether express or implied; without even the implied warranty 16 * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 */ 19 20 #include <linux/err.h> 21 #include <linux/init.h> 22 #include <linux/io.h> 23 #include <linux/irq.h> 24 #include <linux/kernel.h> 25 #include <linux/module.h> 26 #include <linux/of.h> 27 #include <linux/platform_device.h> 28 #include <linux/pm_runtime.h> 29 #include <linux/spinlock.h> 30 #include <linux/v4l2-dv-timings.h> 31 #include <linux/of_graph.h> 32 33 #include "vpif.h" 34 35 MODULE_DESCRIPTION("TI DaVinci Video Port Interface driver"); 36 MODULE_LICENSE("GPL"); 37 38 #define VPIF_DRIVER_NAME "vpif" 39 MODULE_ALIAS("platform:" VPIF_DRIVER_NAME); 40 41 #define VPIF_CH0_MAX_MODES 22 42 #define VPIF_CH1_MAX_MODES 2 43 #define VPIF_CH2_MAX_MODES 15 44 #define VPIF_CH3_MAX_MODES 2 45 46 struct vpif_data { 47 struct platform_device *capture; 48 struct platform_device *display; 49 }; 50 51 DEFINE_SPINLOCK(vpif_lock); 52 EXPORT_SYMBOL_GPL(vpif_lock); 53 54 void __iomem *vpif_base; 55 EXPORT_SYMBOL_GPL(vpif_base); 56 57 /* 58 * vpif_ch_params: video standard configuration parameters for vpif 59 * 60 * The table must include all presets from supported subdevices. 61 */ 62 const struct vpif_channel_config_params vpif_ch_params[] = { 63 /* HDTV formats */ 64 { 65 .name = "480p59_94", 66 .width = 720, 67 .height = 480, 68 .frm_fmt = 1, 69 .ycmux_mode = 0, 70 .eav2sav = 138-8, 71 .sav2eav = 720, 72 .l1 = 1, 73 .l3 = 43, 74 .l5 = 523, 75 .vsize = 525, 76 .capture_format = 0, 77 .vbi_supported = 0, 78 .hd_sd = 1, 79 .dv_timings = V4L2_DV_BT_CEA_720X480P59_94, 80 }, 81 { 82 .name = "576p50", 83 .width = 720, 84 .height = 576, 85 .frm_fmt = 1, 86 .ycmux_mode = 0, 87 .eav2sav = 144-8, 88 .sav2eav = 720, 89 .l1 = 1, 90 .l3 = 45, 91 .l5 = 621, 92 .vsize = 625, 93 .capture_format = 0, 94 .vbi_supported = 0, 95 .hd_sd = 1, 96 .dv_timings = V4L2_DV_BT_CEA_720X576P50, 97 }, 98 { 99 .name = "720p50", 100 .width = 1280, 101 .height = 720, 102 .frm_fmt = 1, 103 .ycmux_mode = 0, 104 .eav2sav = 700-8, 105 .sav2eav = 1280, 106 .l1 = 1, 107 .l3 = 26, 108 .l5 = 746, 109 .vsize = 750, 110 .capture_format = 0, 111 .vbi_supported = 0, 112 .hd_sd = 1, 113 .dv_timings = V4L2_DV_BT_CEA_1280X720P50, 114 }, 115 { 116 .name = "720p60", 117 .width = 1280, 118 .height = 720, 119 .frm_fmt = 1, 120 .ycmux_mode = 0, 121 .eav2sav = 370 - 8, 122 .sav2eav = 1280, 123 .l1 = 1, 124 .l3 = 26, 125 .l5 = 746, 126 .vsize = 750, 127 .capture_format = 0, 128 .vbi_supported = 0, 129 .hd_sd = 1, 130 .dv_timings = V4L2_DV_BT_CEA_1280X720P60, 131 }, 132 { 133 .name = "1080I50", 134 .width = 1920, 135 .height = 1080, 136 .frm_fmt = 0, 137 .ycmux_mode = 0, 138 .eav2sav = 720 - 8, 139 .sav2eav = 1920, 140 .l1 = 1, 141 .l3 = 21, 142 .l5 = 561, 143 .l7 = 563, 144 .l9 = 584, 145 .l11 = 1124, 146 .vsize = 1125, 147 .capture_format = 0, 148 .vbi_supported = 0, 149 .hd_sd = 1, 150 .dv_timings = V4L2_DV_BT_CEA_1920X1080I50, 151 }, 152 { 153 .name = "1080I60", 154 .width = 1920, 155 .height = 1080, 156 .frm_fmt = 0, 157 .ycmux_mode = 0, 158 .eav2sav = 280 - 8, 159 .sav2eav = 1920, 160 .l1 = 1, 161 .l3 = 21, 162 .l5 = 561, 163 .l7 = 563, 164 .l9 = 584, 165 .l11 = 1124, 166 .vsize = 1125, 167 .capture_format = 0, 168 .vbi_supported = 0, 169 .hd_sd = 1, 170 .dv_timings = V4L2_DV_BT_CEA_1920X1080I60, 171 }, 172 { 173 .name = "1080p60", 174 .width = 1920, 175 .height = 1080, 176 .frm_fmt = 1, 177 .ycmux_mode = 0, 178 .eav2sav = 280 - 8, 179 .sav2eav = 1920, 180 .l1 = 1, 181 .l3 = 42, 182 .l5 = 1122, 183 .vsize = 1125, 184 .capture_format = 0, 185 .vbi_supported = 0, 186 .hd_sd = 1, 187 .dv_timings = V4L2_DV_BT_CEA_1920X1080P60, 188 }, 189 190 /* SDTV formats */ 191 { 192 .name = "NTSC_M", 193 .width = 720, 194 .height = 480, 195 .frm_fmt = 0, 196 .ycmux_mode = 1, 197 .eav2sav = 268, 198 .sav2eav = 1440, 199 .l1 = 1, 200 .l3 = 23, 201 .l5 = 263, 202 .l7 = 266, 203 .l9 = 286, 204 .l11 = 525, 205 .vsize = 525, 206 .capture_format = 0, 207 .vbi_supported = 1, 208 .hd_sd = 0, 209 .stdid = V4L2_STD_525_60, 210 }, 211 { 212 .name = "PAL_BDGHIK", 213 .width = 720, 214 .height = 576, 215 .frm_fmt = 0, 216 .ycmux_mode = 1, 217 .eav2sav = 280, 218 .sav2eav = 1440, 219 .l1 = 1, 220 .l3 = 23, 221 .l5 = 311, 222 .l7 = 313, 223 .l9 = 336, 224 .l11 = 624, 225 .vsize = 625, 226 .capture_format = 0, 227 .vbi_supported = 1, 228 .hd_sd = 0, 229 .stdid = V4L2_STD_625_50, 230 }, 231 }; 232 EXPORT_SYMBOL_GPL(vpif_ch_params); 233 234 const unsigned int vpif_ch_params_count = ARRAY_SIZE(vpif_ch_params); 235 EXPORT_SYMBOL_GPL(vpif_ch_params_count); 236 237 static inline void vpif_wr_bit(u32 reg, u32 bit, u32 val) 238 { 239 if (val) 240 vpif_set_bit(reg, bit); 241 else 242 vpif_clr_bit(reg, bit); 243 } 244 245 /* This structure is used to keep track of VPIF size register's offsets */ 246 struct vpif_registers { 247 u32 h_cfg, v_cfg_00, v_cfg_01, v_cfg_02, v_cfg, ch_ctrl; 248 u32 line_offset, vanc0_strt, vanc0_size, vanc1_strt; 249 u32 vanc1_size, width_mask, len_mask; 250 u8 max_modes; 251 }; 252 253 static const struct vpif_registers vpifregs[VPIF_NUM_CHANNELS] = { 254 /* Channel0 */ 255 { 256 VPIF_CH0_H_CFG, VPIF_CH0_V_CFG_00, VPIF_CH0_V_CFG_01, 257 VPIF_CH0_V_CFG_02, VPIF_CH0_V_CFG_03, VPIF_CH0_CTRL, 258 VPIF_CH0_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF, 259 VPIF_CH0_MAX_MODES, 260 }, 261 /* Channel1 */ 262 { 263 VPIF_CH1_H_CFG, VPIF_CH1_V_CFG_00, VPIF_CH1_V_CFG_01, 264 VPIF_CH1_V_CFG_02, VPIF_CH1_V_CFG_03, VPIF_CH1_CTRL, 265 VPIF_CH1_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF, 266 VPIF_CH1_MAX_MODES, 267 }, 268 /* Channel2 */ 269 { 270 VPIF_CH2_H_CFG, VPIF_CH2_V_CFG_00, VPIF_CH2_V_CFG_01, 271 VPIF_CH2_V_CFG_02, VPIF_CH2_V_CFG_03, VPIF_CH2_CTRL, 272 VPIF_CH2_IMG_ADD_OFST, VPIF_CH2_VANC0_STRT, VPIF_CH2_VANC0_SIZE, 273 VPIF_CH2_VANC1_STRT, VPIF_CH2_VANC1_SIZE, 0x7FF, 0x7FF, 274 VPIF_CH2_MAX_MODES 275 }, 276 /* Channel3 */ 277 { 278 VPIF_CH3_H_CFG, VPIF_CH3_V_CFG_00, VPIF_CH3_V_CFG_01, 279 VPIF_CH3_V_CFG_02, VPIF_CH3_V_CFG_03, VPIF_CH3_CTRL, 280 VPIF_CH3_IMG_ADD_OFST, VPIF_CH3_VANC0_STRT, VPIF_CH3_VANC0_SIZE, 281 VPIF_CH3_VANC1_STRT, VPIF_CH3_VANC1_SIZE, 0x7FF, 0x7FF, 282 VPIF_CH3_MAX_MODES 283 }, 284 }; 285 286 /* vpif_set_mode_info: 287 * This function is used to set horizontal and vertical config parameters 288 * As per the standard in the channel, configure the values of L1, L3, 289 * L5, L7 L9, L11 in VPIF Register , also write width and height 290 */ 291 static void vpif_set_mode_info(const struct vpif_channel_config_params *config, 292 u8 channel_id, u8 config_channel_id) 293 { 294 u32 value; 295 296 value = (config->eav2sav & vpifregs[config_channel_id].width_mask); 297 value <<= VPIF_CH_LEN_SHIFT; 298 value |= (config->sav2eav & vpifregs[config_channel_id].width_mask); 299 regw(value, vpifregs[channel_id].h_cfg); 300 301 value = (config->l1 & vpifregs[config_channel_id].len_mask); 302 value <<= VPIF_CH_LEN_SHIFT; 303 value |= (config->l3 & vpifregs[config_channel_id].len_mask); 304 regw(value, vpifregs[channel_id].v_cfg_00); 305 306 value = (config->l5 & vpifregs[config_channel_id].len_mask); 307 value <<= VPIF_CH_LEN_SHIFT; 308 value |= (config->l7 & vpifregs[config_channel_id].len_mask); 309 regw(value, vpifregs[channel_id].v_cfg_01); 310 311 value = (config->l9 & vpifregs[config_channel_id].len_mask); 312 value <<= VPIF_CH_LEN_SHIFT; 313 value |= (config->l11 & vpifregs[config_channel_id].len_mask); 314 regw(value, vpifregs[channel_id].v_cfg_02); 315 316 value = (config->vsize & vpifregs[config_channel_id].len_mask); 317 regw(value, vpifregs[channel_id].v_cfg); 318 } 319 320 /* config_vpif_params 321 * Function to set the parameters of a channel 322 * Mainly modifies the channel ciontrol register 323 * It sets frame format, yc mux mode 324 */ 325 static void config_vpif_params(struct vpif_params *vpifparams, 326 u8 channel_id, u8 found) 327 { 328 const struct vpif_channel_config_params *config = &vpifparams->std_info; 329 u32 value, ch_nip, reg; 330 u8 start, end; 331 int i; 332 333 start = channel_id; 334 end = channel_id + found; 335 336 for (i = start; i < end; i++) { 337 reg = vpifregs[i].ch_ctrl; 338 if (channel_id < 2) 339 ch_nip = VPIF_CAPTURE_CH_NIP; 340 else 341 ch_nip = VPIF_DISPLAY_CH_NIP; 342 343 vpif_wr_bit(reg, ch_nip, config->frm_fmt); 344 vpif_wr_bit(reg, VPIF_CH_YC_MUX_BIT, config->ycmux_mode); 345 vpif_wr_bit(reg, VPIF_CH_INPUT_FIELD_FRAME_BIT, 346 vpifparams->video_params.storage_mode); 347 348 /* Set raster scanning SDR Format */ 349 vpif_clr_bit(reg, VPIF_CH_SDR_FMT_BIT); 350 vpif_wr_bit(reg, VPIF_CH_DATA_MODE_BIT, config->capture_format); 351 352 if (channel_id > 1) /* Set the Pixel enable bit */ 353 vpif_set_bit(reg, VPIF_DISPLAY_PIX_EN_BIT); 354 else if (config->capture_format) { 355 /* Set the polarity of various pins */ 356 vpif_wr_bit(reg, VPIF_CH_FID_POLARITY_BIT, 357 vpifparams->iface.fid_pol); 358 vpif_wr_bit(reg, VPIF_CH_V_VALID_POLARITY_BIT, 359 vpifparams->iface.vd_pol); 360 vpif_wr_bit(reg, VPIF_CH_H_VALID_POLARITY_BIT, 361 vpifparams->iface.hd_pol); 362 363 value = regr(reg); 364 /* Set data width */ 365 value &= ~(0x3u << 366 VPIF_CH_DATA_WIDTH_BIT); 367 value |= ((vpifparams->params.data_sz) << 368 VPIF_CH_DATA_WIDTH_BIT); 369 regw(value, reg); 370 } 371 372 /* Write the pitch in the driver */ 373 regw((vpifparams->video_params.hpitch), 374 vpifregs[i].line_offset); 375 } 376 } 377 378 /* vpif_set_video_params 379 * This function is used to set video parameters in VPIF register 380 */ 381 int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id) 382 { 383 const struct vpif_channel_config_params *config = &vpifparams->std_info; 384 int found = 1; 385 386 vpif_set_mode_info(config, channel_id, channel_id); 387 if (!config->ycmux_mode) { 388 /* YC are on separate channels (HDTV formats) */ 389 vpif_set_mode_info(config, channel_id + 1, channel_id); 390 found = 2; 391 } 392 393 config_vpif_params(vpifparams, channel_id, found); 394 395 regw(0x80, VPIF_REQ_SIZE); 396 regw(0x01, VPIF_EMULATION_CTRL); 397 398 return found; 399 } 400 EXPORT_SYMBOL(vpif_set_video_params); 401 402 void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams, 403 u8 channel_id) 404 { 405 u32 value; 406 407 value = 0x3F8 & (vbiparams->hstart0); 408 value |= 0x3FFFFFF & ((vbiparams->vstart0) << 16); 409 regw(value, vpifregs[channel_id].vanc0_strt); 410 411 value = 0x3F8 & (vbiparams->hstart1); 412 value |= 0x3FFFFFF & ((vbiparams->vstart1) << 16); 413 regw(value, vpifregs[channel_id].vanc1_strt); 414 415 value = 0x3F8 & (vbiparams->hsize0); 416 value |= 0x3FFFFFF & ((vbiparams->vsize0) << 16); 417 regw(value, vpifregs[channel_id].vanc0_size); 418 419 value = 0x3F8 & (vbiparams->hsize1); 420 value |= 0x3FFFFFF & ((vbiparams->vsize1) << 16); 421 regw(value, vpifregs[channel_id].vanc1_size); 422 423 } 424 EXPORT_SYMBOL(vpif_set_vbi_display_params); 425 426 int vpif_channel_getfid(u8 channel_id) 427 { 428 return (regr(vpifregs[channel_id].ch_ctrl) & VPIF_CH_FID_MASK) 429 >> VPIF_CH_FID_SHIFT; 430 } 431 EXPORT_SYMBOL(vpif_channel_getfid); 432 433 static void vpif_pdev_release(struct device *dev) 434 { 435 struct platform_device *pdev = to_platform_device(dev); 436 437 kfree(pdev); 438 } 439 440 static int vpif_probe(struct platform_device *pdev) 441 { 442 static struct resource res_irq; 443 struct platform_device *pdev_capture, *pdev_display; 444 struct device_node *endpoint = NULL; 445 struct vpif_data *data; 446 int ret; 447 int irq; 448 449 vpif_base = devm_platform_ioremap_resource(pdev, 0); 450 if (IS_ERR(vpif_base)) 451 return PTR_ERR(vpif_base); 452 453 data = kzalloc(sizeof(*data), GFP_KERNEL); 454 if (!data) 455 return -ENOMEM; 456 457 platform_set_drvdata(pdev, data); 458 459 pm_runtime_enable(&pdev->dev); 460 pm_runtime_get(&pdev->dev); 461 462 /* 463 * If VPIF Node has endpoints, assume "new" DT support, 464 * where capture and display drivers don't have DT nodes 465 * so their devices need to be registered manually here 466 * for their legacy platform_drivers to work. 467 */ 468 endpoint = of_graph_get_next_endpoint(pdev->dev.of_node, 469 endpoint); 470 if (!endpoint) 471 return 0; 472 of_node_put(endpoint); 473 474 /* 475 * For DT platforms, manually create platform_devices for 476 * capture/display drivers. 477 */ 478 irq = platform_get_irq(pdev, 0); 479 if (irq < 0) { 480 ret = irq; 481 goto err_put_rpm; 482 } 483 res_irq = DEFINE_RES_IRQ_NAMED(irq, of_node_full_name(pdev->dev.of_node)); 484 res_irq.flags |= irq_get_trigger_type(irq); 485 486 pdev_capture = kzalloc(sizeof(*pdev_capture), GFP_KERNEL); 487 if (!pdev_capture) { 488 ret = -ENOMEM; 489 goto err_put_rpm; 490 } 491 492 pdev_capture->name = "vpif_capture"; 493 pdev_capture->id = -1; 494 pdev_capture->resource = &res_irq; 495 pdev_capture->num_resources = 1; 496 pdev_capture->dev.dma_mask = pdev->dev.dma_mask; 497 pdev_capture->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask; 498 pdev_capture->dev.parent = &pdev->dev; 499 pdev_capture->dev.release = vpif_pdev_release; 500 501 ret = platform_device_register(pdev_capture); 502 if (ret) 503 goto err_put_pdev_capture; 504 505 pdev_display = kzalloc(sizeof(*pdev_display), GFP_KERNEL); 506 if (!pdev_display) { 507 ret = -ENOMEM; 508 goto err_put_pdev_capture; 509 } 510 511 pdev_display->name = "vpif_display"; 512 pdev_display->id = -1; 513 pdev_display->resource = &res_irq; 514 pdev_display->num_resources = 1; 515 pdev_display->dev.dma_mask = pdev->dev.dma_mask; 516 pdev_display->dev.coherent_dma_mask = pdev->dev.coherent_dma_mask; 517 pdev_display->dev.parent = &pdev->dev; 518 pdev_display->dev.release = vpif_pdev_release; 519 520 ret = platform_device_register(pdev_display); 521 if (ret) 522 goto err_put_pdev_display; 523 524 data->capture = pdev_capture; 525 data->display = pdev_display; 526 527 return 0; 528 529 err_put_pdev_display: 530 platform_device_put(pdev_display); 531 err_put_pdev_capture: 532 platform_device_put(pdev_capture); 533 err_put_rpm: 534 pm_runtime_put(&pdev->dev); 535 pm_runtime_disable(&pdev->dev); 536 kfree(data); 537 538 return ret; 539 } 540 541 static void vpif_remove(struct platform_device *pdev) 542 { 543 struct vpif_data *data = platform_get_drvdata(pdev); 544 545 if (data->capture) 546 platform_device_unregister(data->capture); 547 if (data->display) 548 platform_device_unregister(data->display); 549 550 pm_runtime_put(&pdev->dev); 551 pm_runtime_disable(&pdev->dev); 552 553 kfree(data); 554 } 555 556 #ifdef CONFIG_PM 557 static int vpif_suspend(struct device *dev) 558 { 559 pm_runtime_put(dev); 560 return 0; 561 } 562 563 static int vpif_resume(struct device *dev) 564 { 565 pm_runtime_get(dev); 566 return 0; 567 } 568 569 static const struct dev_pm_ops vpif_pm = { 570 .suspend = vpif_suspend, 571 .resume = vpif_resume, 572 }; 573 574 #define vpif_pm_ops (&vpif_pm) 575 #else 576 #define vpif_pm_ops NULL 577 #endif 578 579 #if IS_ENABLED(CONFIG_OF) 580 static const struct of_device_id vpif_of_match[] = { 581 { .compatible = "ti,da850-vpif", }, 582 { /* sentinel */ }, 583 }; 584 MODULE_DEVICE_TABLE(of, vpif_of_match); 585 #endif 586 587 static struct platform_driver vpif_driver = { 588 .driver = { 589 .of_match_table = of_match_ptr(vpif_of_match), 590 .name = VPIF_DRIVER_NAME, 591 .pm = vpif_pm_ops, 592 }, 593 .remove_new = vpif_remove, 594 .probe = vpif_probe, 595 }; 596 597 static void vpif_exit(void) 598 { 599 platform_driver_unregister(&vpif_driver); 600 } 601 602 static int __init vpif_init(void) 603 { 604 return platform_driver_register(&vpif_driver); 605 } 606 subsys_initcall(vpif_init); 607 module_exit(vpif_exit); 608 609