1# SPDX-License-Identifier: GPL-2.0-only
2config VIDEO_DAVINCI_VPIF_DISPLAY
3	tristate "TI DaVinci VPIF V4L2-Display driver"
4	depends on V4L_PLATFORM_DRIVERS
5	depends on VIDEO_DEV
6	depends on ARCH_DAVINCI || COMPILE_TEST
7	depends on I2C
8	select VIDEOBUF2_DMA_CONTIG
9	select VIDEO_ADV7343 if MEDIA_SUBDRV_AUTOSELECT
10	select VIDEO_THS7303 if MEDIA_SUBDRV_AUTOSELECT
11	help
12	  Enables Davinci VPIF module used for display devices.
13	  This module is used for display on TI DM6467/DA850/OMAPL138
14	  SoCs.
15
16	  To compile this driver as a module, choose M here. There will
17	  be two modules called vpif.ko and vpif_display.ko
18
19config VIDEO_DAVINCI_VPIF_CAPTURE
20	tristate "TI DaVinci VPIF video capture driver"
21	depends on V4L_PLATFORM_DRIVERS
22	depends on VIDEO_DEV
23	depends on ARCH_DAVINCI || COMPILE_TEST
24	depends on I2C
25	select VIDEOBUF2_DMA_CONTIG
26	select V4L2_FWNODE
27	help
28	  Enables Davinci VPIF module used for capture devices.
29	  This module is used for capture on TI DM6467/DA850/OMAPL138
30	  SoCs.
31
32	  To compile this driver as a module, choose M here. There will
33	  be two modules called vpif.ko and vpif_capture.ko
34
35config VIDEO_DM6446_CCDC
36	tristate "TI DM6446 CCDC video capture driver"
37	depends on V4L_PLATFORM_DRIVERS
38	depends on VIDEO_DEV
39	depends on ARCH_DAVINCI || COMPILE_TEST
40	depends on I2C
41	select VIDEOBUF_DMA_CONTIG
42	help
43	   Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces
44	   with decoder modules such as TVP5146 over BT656 or
45	   sensor module such as MT9T001 over a raw interface. This
46	   module configures the interface and CCDC/ISIF to do
47	   video frame capture from slave decoders.
48
49	   To compile this driver as a module, choose M here. There will
50	   be three modules called vpfe_capture.ko, vpss.ko and dm644x_ccdc.ko
51
52config VIDEO_DM355_CCDC
53	tristate "TI DM355 CCDC video capture driver"
54	depends on V4L_PLATFORM_DRIVERS
55	depends on VIDEO_DEV
56	depends on ARCH_DAVINCI || COMPILE_TEST
57	depends on I2C
58	select VIDEOBUF_DMA_CONTIG
59	help
60	   Enables DM355 CCD hw module. DM355 CCDC hw interfaces
61	   with decoder modules such as TVP5146 over BT656 or
62	   sensor module such as MT9T001 over a raw interface. This
63	   module configures the interface and CCDC/ISIF to do
64	   video frame capture from a slave decoders
65
66	   To compile this driver as a module, choose M here. There will
67	   be three modules called vpfe_capture.ko, vpss.ko and dm355_ccdc.ko
68
69config VIDEO_DM365_ISIF
70	tristate "TI DM365 ISIF video capture driver"
71	depends on V4L_PLATFORM_DRIVERS
72	depends on VIDEO_DEV
73	depends on ARCH_DAVINCI || COMPILE_TEST
74	depends on I2C
75	select VIDEOBUF_DMA_CONTIG
76	help
77	   Enables ISIF hw module. This is the hardware module for
78	   configuring ISIF in VPFE to capture Raw Bayer RGB data from
79	   a image sensor or YUV data from a YUV source.
80
81	   To compile this driver as a module, choose M here. There will
82	   be three modules called vpfe_capture.ko, vpss.ko and isif.ko
83
84config VIDEO_DAVINCI_VPBE_DISPLAY
85	tristate "TI DaVinci VPBE V4L2-Display driver"
86	depends on V4L_PLATFORM_DRIVERS
87	depends on VIDEO_DEV
88	depends on ARCH_DAVINCI || COMPILE_TEST
89	depends on I2C
90	select VIDEOBUF2_DMA_CONTIG
91	help
92	    Enables Davinci VPBE module used for display devices.
93	    This module is used for display on TI DM644x/DM365/DM355
94	    based display devices.
95
96	    To compile this driver as a module, choose M here. There will
97	    be five modules created called vpss.ko, vpbe.ko, vpbe_osd.ko,
98	    vpbe_venc.ko and vpbe_display.ko
99