1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * budget.c: driver for the SAA7146 based Budget DVB cards 4 * 5 * Compiled from various sources by Michael Hunold <michael@mihu.de> 6 * 7 * Copyright (C) 2002 Ralph Metzler <rjkm@metzlerbros.de> 8 * 9 * Copyright (C) 1999-2002 Ralph Metzler 10 * & Marcus Metzler for convergence integrated media GmbH 11 * 12 * 26feb2004 Support for FS Activy Card (Grundig tuner) by 13 * Michael Dreher <michael@5dot1.de>, 14 * Oliver Endriss <o.endriss@gmx.de> and 15 * Andreas 'randy' Weinberger 16 * 17 * the project's page is at https://linuxtv.org 18 */ 19 20 #include "budget.h" 21 #include "stv0299.h" 22 #include "ves1x93.h" 23 #include "ves1820.h" 24 #include "l64781.h" 25 #include "tda8083.h" 26 #include "s5h1420.h" 27 #include "tda10086.h" 28 #include "tda826x.h" 29 #include "lnbp21.h" 30 #include "bsru6.h" 31 #include "bsbe1.h" 32 #include "tdhd1.h" 33 #include "stv6110x.h" 34 #include "stv090x.h" 35 #include "isl6423.h" 36 #include "lnbh24.h" 37 38 39 static int diseqc_method; 40 module_param(diseqc_method, int, 0444); 41 MODULE_PARM_DESC(diseqc_method, "Select DiSEqC method for subsystem id 13c2:1003, 0: default, 1: more reliable (for newer revisions only)"); 42 43 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); 44 45 static void Set22K (struct budget *budget, int state) 46 { 47 struct saa7146_dev *dev=budget->dev; 48 dprintk(2, "budget: %p\n", budget); 49 saa7146_setgpio(dev, 3, (state ? SAA7146_GPIO_OUTHI : SAA7146_GPIO_OUTLO)); 50 } 51 52 /* Diseqc functions only for TT Budget card */ 53 /* taken from the Skyvision DVB driver by 54 Ralph Metzler <rjkm@metzlerbros.de> */ 55 56 static void DiseqcSendBit (struct budget *budget, int data) 57 { 58 struct saa7146_dev *dev=budget->dev; 59 dprintk(2, "budget: %p\n", budget); 60 61 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); 62 udelay(data ? 500 : 1000); 63 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); 64 udelay(data ? 1000 : 500); 65 } 66 67 static void DiseqcSendByte (struct budget *budget, int data) 68 { 69 int i, par=1, d; 70 71 dprintk(2, "budget: %p\n", budget); 72 73 for (i=7; i>=0; i--) { 74 d = (data>>i)&1; 75 par ^= d; 76 DiseqcSendBit(budget, d); 77 } 78 79 DiseqcSendBit(budget, par); 80 } 81 82 static int SendDiSEqCMsg (struct budget *budget, int len, u8 *msg, unsigned long burst) 83 { 84 struct saa7146_dev *dev=budget->dev; 85 int i; 86 87 dprintk(2, "budget: %p\n", budget); 88 89 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); 90 mdelay(16); 91 92 for (i=0; i<len; i++) 93 DiseqcSendByte(budget, msg[i]); 94 95 mdelay(16); 96 97 if (burst!=-1) { 98 if (burst) 99 DiseqcSendByte(budget, 0xff); 100 else { 101 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTHI); 102 mdelay(12); 103 udelay(500); 104 saa7146_setgpio(dev, 3, SAA7146_GPIO_OUTLO); 105 } 106 msleep(20); 107 } 108 109 return 0; 110 } 111 112 /* 113 * Routines for the Fujitsu Siemens Activy budget card 114 * 22 kHz tone and DiSEqC are handled by the frontend. 115 * Voltage must be set here. 116 * GPIO 1: LNBP EN, GPIO 2: LNBP VSEL 117 */ 118 static int SetVoltage_Activy(struct budget *budget, 119 enum fe_sec_voltage voltage) 120 { 121 struct saa7146_dev *dev=budget->dev; 122 123 dprintk(2, "budget: %p\n", budget); 124 125 switch (voltage) { 126 case SEC_VOLTAGE_13: 127 saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); 128 saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTLO); 129 break; 130 case SEC_VOLTAGE_18: 131 saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTHI); 132 saa7146_setgpio(dev, 2, SAA7146_GPIO_OUTHI); 133 break; 134 case SEC_VOLTAGE_OFF: 135 saa7146_setgpio(dev, 1, SAA7146_GPIO_OUTLO); 136 break; 137 default: 138 return -EINVAL; 139 } 140 141 return 0; 142 } 143 144 static int siemens_budget_set_voltage(struct dvb_frontend *fe, 145 enum fe_sec_voltage voltage) 146 { 147 struct budget* budget = (struct budget*) fe->dvb->priv; 148 149 return SetVoltage_Activy (budget, voltage); 150 } 151 152 static int budget_set_tone(struct dvb_frontend *fe, 153 enum fe_sec_tone_mode tone) 154 { 155 struct budget* budget = (struct budget*) fe->dvb->priv; 156 157 switch (tone) { 158 case SEC_TONE_ON: 159 Set22K (budget, 1); 160 break; 161 162 case SEC_TONE_OFF: 163 Set22K (budget, 0); 164 break; 165 166 default: 167 return -EINVAL; 168 } 169 170 return 0; 171 } 172 173 static int budget_diseqc_send_master_cmd(struct dvb_frontend* fe, struct dvb_diseqc_master_cmd* cmd) 174 { 175 struct budget* budget = (struct budget*) fe->dvb->priv; 176 177 SendDiSEqCMsg (budget, cmd->msg_len, cmd->msg, 0); 178 179 return 0; 180 } 181 182 static int budget_diseqc_send_burst(struct dvb_frontend *fe, 183 enum fe_sec_mini_cmd minicmd) 184 { 185 struct budget* budget = (struct budget*) fe->dvb->priv; 186 187 SendDiSEqCMsg (budget, 0, NULL, minicmd); 188 189 return 0; 190 } 191 192 static int alps_bsrv2_tuner_set_params(struct dvb_frontend *fe) 193 { 194 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 195 struct budget* budget = (struct budget*) fe->dvb->priv; 196 u8 pwr = 0; 197 u8 buf[4]; 198 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = buf, .len = sizeof(buf) }; 199 u32 div = (c->frequency + 479500) / 125; 200 201 if (c->frequency > 2000000) 202 pwr = 3; 203 else if (c->frequency > 1800000) 204 pwr = 2; 205 else if (c->frequency > 1600000) 206 pwr = 1; 207 else if (c->frequency > 1200000) 208 pwr = 0; 209 else if (c->frequency >= 1100000) 210 pwr = 1; 211 else pwr = 2; 212 213 buf[0] = (div >> 8) & 0x7f; 214 buf[1] = div & 0xff; 215 buf[2] = ((div & 0x18000) >> 10) | 0x95; 216 buf[3] = (pwr << 6) | 0x30; 217 218 // NOTE: since we're using a prescaler of 2, we set the 219 // divisor frequency to 62.5kHz and divide by 125 above 220 221 if (fe->ops.i2c_gate_ctrl) 222 fe->ops.i2c_gate_ctrl(fe, 1); 223 if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; 224 return 0; 225 } 226 227 static struct ves1x93_config alps_bsrv2_config = 228 { 229 .demod_address = 0x08, 230 .xin = 90100000UL, 231 .invert_pwm = 0, 232 }; 233 234 static int alps_tdbe2_tuner_set_params(struct dvb_frontend *fe) 235 { 236 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 237 struct budget* budget = (struct budget*) fe->dvb->priv; 238 u32 div; 239 u8 data[4]; 240 struct i2c_msg msg = { .addr = 0x62, .flags = 0, .buf = data, .len = sizeof(data) }; 241 242 div = (c->frequency + 35937500 + 31250) / 62500; 243 244 data[0] = (div >> 8) & 0x7f; 245 data[1] = div & 0xff; 246 data[2] = 0x85 | ((div >> 10) & 0x60); 247 data[3] = (c->frequency < 174000000 ? 0x88 : c->frequency < 470000000 ? 0x84 : 0x81); 248 249 if (fe->ops.i2c_gate_ctrl) 250 fe->ops.i2c_gate_ctrl(fe, 1); 251 if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; 252 return 0; 253 } 254 255 static struct ves1820_config alps_tdbe2_config = { 256 .demod_address = 0x09, 257 .xin = 57840000UL, 258 .invert = 1, 259 .selagc = VES1820_SELAGC_SIGNAMPERR, 260 }; 261 262 static int grundig_29504_401_tuner_set_params(struct dvb_frontend *fe) 263 { 264 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 265 struct budget *budget = fe->dvb->priv; 266 u8 *tuner_addr = fe->tuner_priv; 267 u32 div; 268 u8 cfg, cpump, band_select; 269 u8 data[4]; 270 struct i2c_msg msg = { .flags = 0, .buf = data, .len = sizeof(data) }; 271 272 if (tuner_addr) 273 msg.addr = *tuner_addr; 274 else 275 msg.addr = 0x61; 276 277 div = (36125000 + c->frequency) / 166666; 278 279 cfg = 0x88; 280 281 if (c->frequency < 175000000) 282 cpump = 2; 283 else if (c->frequency < 390000000) 284 cpump = 1; 285 else if (c->frequency < 470000000) 286 cpump = 2; 287 else if (c->frequency < 750000000) 288 cpump = 1; 289 else 290 cpump = 3; 291 292 if (c->frequency < 175000000) 293 band_select = 0x0e; 294 else if (c->frequency < 470000000) 295 band_select = 0x05; 296 else 297 band_select = 0x03; 298 299 data[0] = (div >> 8) & 0x7f; 300 data[1] = div & 0xff; 301 data[2] = ((div >> 10) & 0x60) | cfg; 302 data[3] = (cpump << 6) | band_select; 303 304 if (fe->ops.i2c_gate_ctrl) 305 fe->ops.i2c_gate_ctrl(fe, 1); 306 if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; 307 return 0; 308 } 309 310 static struct l64781_config grundig_29504_401_config = { 311 .demod_address = 0x55, 312 }; 313 314 static struct l64781_config grundig_29504_401_config_activy = { 315 .demod_address = 0x54, 316 }; 317 318 static u8 tuner_address_grundig_29504_401_activy = 0x60; 319 320 static int grundig_29504_451_tuner_set_params(struct dvb_frontend *fe) 321 { 322 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 323 struct budget* budget = (struct budget*) fe->dvb->priv; 324 u32 div; 325 u8 data[4]; 326 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; 327 328 div = c->frequency / 125; 329 data[0] = (div >> 8) & 0x7f; 330 data[1] = div & 0xff; 331 data[2] = 0x8e; 332 data[3] = 0x00; 333 334 if (fe->ops.i2c_gate_ctrl) 335 fe->ops.i2c_gate_ctrl(fe, 1); 336 if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; 337 return 0; 338 } 339 340 static struct tda8083_config grundig_29504_451_config = { 341 .demod_address = 0x68, 342 }; 343 344 static int s5h1420_tuner_set_params(struct dvb_frontend *fe) 345 { 346 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 347 struct budget* budget = (struct budget*) fe->dvb->priv; 348 u32 div; 349 u8 data[4]; 350 struct i2c_msg msg = { .addr = 0x61, .flags = 0, .buf = data, .len = sizeof(data) }; 351 352 div = c->frequency / 1000; 353 data[0] = (div >> 8) & 0x7f; 354 data[1] = div & 0xff; 355 data[2] = 0xc2; 356 357 if (div < 1450) 358 data[3] = 0x00; 359 else if (div < 1850) 360 data[3] = 0x40; 361 else if (div < 2000) 362 data[3] = 0x80; 363 else 364 data[3] = 0xc0; 365 366 if (fe->ops.i2c_gate_ctrl) 367 fe->ops.i2c_gate_ctrl(fe, 1); 368 if (i2c_transfer (&budget->i2c_adap, &msg, 1) != 1) return -EIO; 369 370 return 0; 371 } 372 373 static struct s5h1420_config s5h1420_config = { 374 .demod_address = 0x53, 375 .invert = 1, 376 .cdclk_polarity = 1, 377 }; 378 379 static struct tda10086_config tda10086_config = { 380 .demod_address = 0x0e, 381 .invert = 0, 382 .diseqc_tone = 1, 383 .xtal_freq = TDA10086_XTAL_16M, 384 }; 385 386 static const struct stv0299_config alps_bsru6_config_activy = { 387 .demod_address = 0x68, 388 .inittab = alps_bsru6_inittab, 389 .mclk = 88000000UL, 390 .invert = 1, 391 .op0_off = 1, 392 .min_delay_ms = 100, 393 .set_symbol_rate = alps_bsru6_set_symbol_rate, 394 }; 395 396 static const struct stv0299_config alps_bsbe1_config_activy = { 397 .demod_address = 0x68, 398 .inittab = alps_bsbe1_inittab, 399 .mclk = 88000000UL, 400 .invert = 1, 401 .op0_off = 1, 402 .min_delay_ms = 100, 403 .set_symbol_rate = alps_bsbe1_set_symbol_rate, 404 }; 405 406 static int alps_tdhd1_204_request_firmware(struct dvb_frontend *fe, const struct firmware **fw, char *name) 407 { 408 struct budget *budget = (struct budget *)fe->dvb->priv; 409 410 return request_firmware(fw, name, &budget->dev->pci->dev); 411 } 412 413 414 static int i2c_readreg(struct i2c_adapter *i2c, u8 adr, u8 reg) 415 { 416 u8 val; 417 struct i2c_msg msg[] = { 418 { .addr = adr, .flags = 0, .buf = ®, .len = 1 }, 419 { .addr = adr, .flags = I2C_M_RD, .buf = &val, .len = 1 } 420 }; 421 422 return (i2c_transfer(i2c, msg, 2) != 2) ? -EIO : val; 423 } 424 425 static u8 read_pwm(struct budget* budget) 426 { 427 u8 b = 0xff; 428 u8 pwm; 429 struct i2c_msg msg[] = { { .addr = 0x50,.flags = 0,.buf = &b,.len = 1 }, 430 { .addr = 0x50,.flags = I2C_M_RD,.buf = &pwm,.len = 1} }; 431 432 if ((i2c_transfer(&budget->i2c_adap, msg, 2) != 2) || (pwm == 0xff)) 433 pwm = 0x48; 434 435 return pwm; 436 } 437 438 static struct stv090x_config tt1600_stv090x_config = { 439 .device = STV0903, 440 .demod_mode = STV090x_SINGLE, 441 .clk_mode = STV090x_CLK_EXT, 442 443 .xtal = 13500000, 444 .address = 0x68, 445 446 .ts1_mode = STV090x_TSMODE_DVBCI, 447 .ts2_mode = STV090x_TSMODE_SERIAL_CONTINUOUS, 448 449 .repeater_level = STV090x_RPTLEVEL_16, 450 451 .tuner_init = NULL, 452 .tuner_sleep = NULL, 453 .tuner_set_mode = NULL, 454 .tuner_set_frequency = NULL, 455 .tuner_get_frequency = NULL, 456 .tuner_set_bandwidth = NULL, 457 .tuner_get_bandwidth = NULL, 458 .tuner_set_bbgain = NULL, 459 .tuner_get_bbgain = NULL, 460 .tuner_set_refclk = NULL, 461 .tuner_get_status = NULL, 462 }; 463 464 static struct stv6110x_config tt1600_stv6110x_config = { 465 .addr = 0x60, 466 .refclk = 27000000, 467 .clk_div = 2, 468 }; 469 470 static struct isl6423_config tt1600_isl6423_config = { 471 .current_max = SEC_CURRENT_515m, 472 .curlim = SEC_CURRENT_LIM_ON, 473 .mod_extern = 1, 474 .addr = 0x08, 475 }; 476 477 static void frontend_init(struct budget *budget) 478 { 479 (void)alps_bsbe1_config; /* avoid warning */ 480 481 switch(budget->dev->pci->subsystem_device) { 482 case 0x1003: // Hauppauge/TT Nova budget (stv0299/ALPS BSRU6(tsa5059) OR ves1893/ALPS BSRV2(sp5659)) 483 case 0x1013: 484 // try the ALPS BSRV2 first of all 485 budget->dvb_frontend = dvb_attach(ves1x93_attach, &alps_bsrv2_config, &budget->i2c_adap); 486 if (budget->dvb_frontend) { 487 budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsrv2_tuner_set_params; 488 budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd; 489 budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst; 490 budget->dvb_frontend->ops.set_tone = budget_set_tone; 491 break; 492 } 493 494 // try the ALPS BSRU6 now 495 budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap); 496 if (budget->dvb_frontend) { 497 budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; 498 budget->dvb_frontend->tuner_priv = &budget->i2c_adap; 499 if (budget->dev->pci->subsystem_device == 0x1003 && diseqc_method == 0) { 500 budget->dvb_frontend->ops.diseqc_send_master_cmd = budget_diseqc_send_master_cmd; 501 budget->dvb_frontend->ops.diseqc_send_burst = budget_diseqc_send_burst; 502 budget->dvb_frontend->ops.set_tone = budget_set_tone; 503 } 504 break; 505 } 506 break; 507 508 case 0x1004: // Hauppauge/TT DVB-C budget (ves1820/ALPS TDBE2(sp5659)) 509 510 budget->dvb_frontend = dvb_attach(ves1820_attach, &alps_tdbe2_config, &budget->i2c_adap, read_pwm(budget)); 511 if (budget->dvb_frontend) { 512 budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdbe2_tuner_set_params; 513 break; 514 } 515 break; 516 517 case 0x1005: // Hauppauge/TT Nova-T budget (L64781/Grundig 29504-401(tsa5060)) 518 519 budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config, &budget->i2c_adap); 520 if (budget->dvb_frontend) { 521 budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params; 522 budget->dvb_frontend->tuner_priv = NULL; 523 break; 524 } 525 break; 526 527 case 0x4f52: /* Cards based on Philips Semi Sylt PCI ref. design */ 528 budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config, &budget->i2c_adap); 529 if (budget->dvb_frontend) { 530 printk(KERN_INFO "budget: tuner ALPS BSRU6 in Philips Semi. Sylt detected\n"); 531 budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; 532 budget->dvb_frontend->tuner_priv = &budget->i2c_adap; 533 break; 534 } 535 break; 536 537 case 0x4f60: /* Fujitsu Siemens Activy Budget-S PCI rev AL (stv0299/tsa5059) */ 538 { 539 int subtype = i2c_readreg(&budget->i2c_adap, 0x50, 0x67); 540 541 if (subtype < 0) 542 break; 543 /* fixme: find a better way to identify the card */ 544 if (subtype < 0x36) { 545 /* assume ALPS BSRU6 */ 546 budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsru6_config_activy, &budget->i2c_adap); 547 if (budget->dvb_frontend) { 548 printk(KERN_INFO "budget: tuner ALPS BSRU6 detected\n"); 549 budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; 550 budget->dvb_frontend->tuner_priv = &budget->i2c_adap; 551 budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; 552 budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; 553 break; 554 } 555 } else { 556 /* assume ALPS BSBE1 */ 557 /* reset tuner */ 558 saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTLO); 559 msleep(50); 560 saa7146_setgpio(budget->dev, 3, SAA7146_GPIO_OUTHI); 561 msleep(250); 562 budget->dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config_activy, &budget->i2c_adap); 563 if (budget->dvb_frontend) { 564 printk(KERN_INFO "budget: tuner ALPS BSBE1 detected\n"); 565 budget->dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params; 566 budget->dvb_frontend->tuner_priv = &budget->i2c_adap; 567 budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; 568 budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; 569 break; 570 } 571 } 572 break; 573 } 574 575 case 0x4f61: // Fujitsu Siemens Activy Budget-S PCI rev GR (tda8083/Grundig 29504-451(tsa5522)) 576 budget->dvb_frontend = dvb_attach(tda8083_attach, &grundig_29504_451_config, &budget->i2c_adap); 577 if (budget->dvb_frontend) { 578 budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_451_tuner_set_params; 579 budget->dvb_frontend->ops.set_voltage = siemens_budget_set_voltage; 580 budget->dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; 581 } 582 break; 583 584 case 0x5f60: /* Fujitsu Siemens Activy Budget-T PCI rev AL (tda10046/ALPS TDHD1-204A) */ 585 budget->dvb_frontend = dvb_attach(tda10046_attach, &alps_tdhd1_204a_config, &budget->i2c_adap); 586 if (budget->dvb_frontend) { 587 budget->dvb_frontend->ops.tuner_ops.set_params = alps_tdhd1_204a_tuner_set_params; 588 budget->dvb_frontend->tuner_priv = &budget->i2c_adap; 589 } 590 break; 591 592 case 0x5f61: /* Fujitsu Siemens Activy Budget-T PCI rev GR (L64781/Grundig 29504-401(tsa5060)) */ 593 budget->dvb_frontend = dvb_attach(l64781_attach, &grundig_29504_401_config_activy, &budget->i2c_adap); 594 if (budget->dvb_frontend) { 595 budget->dvb_frontend->tuner_priv = &tuner_address_grundig_29504_401_activy; 596 budget->dvb_frontend->ops.tuner_ops.set_params = grundig_29504_401_tuner_set_params; 597 } 598 break; 599 600 case 0x1016: // Hauppauge/TT Nova-S SE (samsung s5h1420/????(tda8260)) 601 { 602 struct dvb_frontend *fe; 603 604 fe = dvb_attach(s5h1420_attach, &s5h1420_config, &budget->i2c_adap); 605 if (fe) { 606 fe->ops.tuner_ops.set_params = s5h1420_tuner_set_params; 607 budget->dvb_frontend = fe; 608 if (dvb_attach(lnbp21_attach, fe, &budget->i2c_adap, 609 0, 0) == NULL) { 610 printk("%s: No LNBP21 found!\n", __func__); 611 goto error_out; 612 } 613 break; 614 } 615 } 616 /* fall through */ 617 case 0x1018: // TT Budget-S-1401 (philips tda10086/philips tda8262) 618 { 619 struct dvb_frontend *fe; 620 621 // gpio2 is connected to CLB - reset it + leave it high 622 saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO); 623 msleep(1); 624 saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI); 625 msleep(1); 626 627 fe = dvb_attach(tda10086_attach, &tda10086_config, &budget->i2c_adap); 628 if (fe) { 629 budget->dvb_frontend = fe; 630 if (dvb_attach(tda826x_attach, fe, 0x60, 631 &budget->i2c_adap, 0) == NULL) 632 printk("%s: No tda826x found!\n", __func__); 633 if (dvb_attach(lnbp21_attach, fe, 634 &budget->i2c_adap, 0, 0) == NULL) { 635 printk("%s: No LNBP21 found!\n", __func__); 636 goto error_out; 637 } 638 break; 639 } 640 } 641 /* fall through */ 642 643 case 0x101c: { /* TT S2-1600 */ 644 const struct stv6110x_devctl *ctl; 645 saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO); 646 msleep(50); 647 saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI); 648 msleep(250); 649 650 budget->dvb_frontend = dvb_attach(stv090x_attach, 651 &tt1600_stv090x_config, 652 &budget->i2c_adap, 653 STV090x_DEMODULATOR_0); 654 655 if (budget->dvb_frontend) { 656 657 ctl = dvb_attach(stv6110x_attach, 658 budget->dvb_frontend, 659 &tt1600_stv6110x_config, 660 &budget->i2c_adap); 661 662 if (ctl) { 663 tt1600_stv090x_config.tuner_init = ctl->tuner_init; 664 tt1600_stv090x_config.tuner_sleep = ctl->tuner_sleep; 665 tt1600_stv090x_config.tuner_set_mode = ctl->tuner_set_mode; 666 tt1600_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency; 667 tt1600_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency; 668 tt1600_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth; 669 tt1600_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth; 670 tt1600_stv090x_config.tuner_set_bbgain = ctl->tuner_set_bbgain; 671 tt1600_stv090x_config.tuner_get_bbgain = ctl->tuner_get_bbgain; 672 tt1600_stv090x_config.tuner_set_refclk = ctl->tuner_set_refclk; 673 tt1600_stv090x_config.tuner_get_status = ctl->tuner_get_status; 674 675 /* call the init function once to initialize 676 tuner's clock output divider and demod's 677 master clock */ 678 if (budget->dvb_frontend->ops.init) 679 budget->dvb_frontend->ops.init(budget->dvb_frontend); 680 681 if (dvb_attach(isl6423_attach, 682 budget->dvb_frontend, 683 &budget->i2c_adap, 684 &tt1600_isl6423_config) == NULL) { 685 printk(KERN_ERR "%s: No Intersil ISL6423 found!\n", __func__); 686 goto error_out; 687 } 688 } else { 689 printk(KERN_ERR "%s: No STV6110(A) Silicon Tuner found!\n", __func__); 690 goto error_out; 691 } 692 } 693 } 694 break; 695 696 case 0x1020: { /* Omicom S2 */ 697 const struct stv6110x_devctl *ctl; 698 saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTLO); 699 msleep(50); 700 saa7146_setgpio(budget->dev, 2, SAA7146_GPIO_OUTHI); 701 msleep(250); 702 703 budget->dvb_frontend = dvb_attach(stv090x_attach, 704 &tt1600_stv090x_config, 705 &budget->i2c_adap, 706 STV090x_DEMODULATOR_0); 707 708 if (budget->dvb_frontend) { 709 printk(KERN_INFO "budget: Omicom S2 detected\n"); 710 711 ctl = dvb_attach(stv6110x_attach, 712 budget->dvb_frontend, 713 &tt1600_stv6110x_config, 714 &budget->i2c_adap); 715 716 if (ctl) { 717 tt1600_stv090x_config.tuner_init = ctl->tuner_init; 718 tt1600_stv090x_config.tuner_sleep = ctl->tuner_sleep; 719 tt1600_stv090x_config.tuner_set_mode = ctl->tuner_set_mode; 720 tt1600_stv090x_config.tuner_set_frequency = ctl->tuner_set_frequency; 721 tt1600_stv090x_config.tuner_get_frequency = ctl->tuner_get_frequency; 722 tt1600_stv090x_config.tuner_set_bandwidth = ctl->tuner_set_bandwidth; 723 tt1600_stv090x_config.tuner_get_bandwidth = ctl->tuner_get_bandwidth; 724 tt1600_stv090x_config.tuner_set_bbgain = ctl->tuner_set_bbgain; 725 tt1600_stv090x_config.tuner_get_bbgain = ctl->tuner_get_bbgain; 726 tt1600_stv090x_config.tuner_set_refclk = ctl->tuner_set_refclk; 727 tt1600_stv090x_config.tuner_get_status = ctl->tuner_get_status; 728 729 /* call the init function once to initialize 730 tuner's clock output divider and demod's 731 master clock */ 732 if (budget->dvb_frontend->ops.init) 733 budget->dvb_frontend->ops.init(budget->dvb_frontend); 734 735 if (dvb_attach(lnbh24_attach, 736 budget->dvb_frontend, 737 &budget->i2c_adap, 738 LNBH24_PCL | LNBH24_TTX, 739 LNBH24_TEN, 0x14>>1) == NULL) { 740 printk(KERN_ERR 741 "No LNBH24 found!\n"); 742 goto error_out; 743 } 744 } else { 745 printk(KERN_ERR "%s: No STV6110(A) Silicon Tuner found!\n", __func__); 746 goto error_out; 747 } 748 } 749 } 750 break; 751 } 752 753 if (budget->dvb_frontend == NULL) { 754 printk("budget: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", 755 budget->dev->pci->vendor, 756 budget->dev->pci->device, 757 budget->dev->pci->subsystem_vendor, 758 budget->dev->pci->subsystem_device); 759 } else { 760 if (dvb_register_frontend(&budget->dvb_adapter, budget->dvb_frontend)) 761 goto error_out; 762 } 763 return; 764 765 error_out: 766 printk("budget: Frontend registration failed!\n"); 767 dvb_frontend_detach(budget->dvb_frontend); 768 budget->dvb_frontend = NULL; 769 return; 770 } 771 772 static int budget_attach (struct saa7146_dev* dev, struct saa7146_pci_extension_data *info) 773 { 774 struct budget *budget = NULL; 775 int err; 776 777 budget = kmalloc(sizeof(struct budget), GFP_KERNEL); 778 if( NULL == budget ) { 779 return -ENOMEM; 780 } 781 782 dprintk(2, "dev:%p, info:%p, budget:%p\n", dev, info, budget); 783 784 dev->ext_priv = budget; 785 786 err = ttpci_budget_init(budget, dev, info, THIS_MODULE, adapter_nr); 787 if (err) { 788 printk("==> failed\n"); 789 kfree (budget); 790 return err; 791 } 792 793 budget->dvb_adapter.priv = budget; 794 frontend_init(budget); 795 796 ttpci_budget_init_hooks(budget); 797 798 return 0; 799 } 800 801 static int budget_detach (struct saa7146_dev* dev) 802 { 803 struct budget *budget = (struct budget*) dev->ext_priv; 804 int err; 805 806 if (budget->dvb_frontend) { 807 dvb_unregister_frontend(budget->dvb_frontend); 808 dvb_frontend_detach(budget->dvb_frontend); 809 } 810 811 err = ttpci_budget_deinit (budget); 812 813 kfree (budget); 814 dev->ext_priv = NULL; 815 816 return err; 817 } 818 819 static struct saa7146_extension budget_extension; 820 821 MAKE_BUDGET_INFO(ttbs, "TT-Budget/WinTV-NOVA-S PCI", BUDGET_TT); 822 MAKE_BUDGET_INFO(ttbc, "TT-Budget/WinTV-NOVA-C PCI", BUDGET_TT); 823 MAKE_BUDGET_INFO(ttbt, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT); 824 MAKE_BUDGET_INFO(satel, "SATELCO Multimedia PCI", BUDGET_TT_HW_DISEQC); 825 MAKE_BUDGET_INFO(ttbs1401, "TT-Budget-S-1401 PCI", BUDGET_TT); 826 MAKE_BUDGET_INFO(tt1600, "TT-Budget S2-1600 PCI", BUDGET_TT); 827 MAKE_BUDGET_INFO(fsacs0, "Fujitsu Siemens Activy Budget-S PCI (rev GR/grundig frontend)", BUDGET_FS_ACTIVY); 828 MAKE_BUDGET_INFO(fsacs1, "Fujitsu Siemens Activy Budget-S PCI (rev AL/alps frontend)", BUDGET_FS_ACTIVY); 829 MAKE_BUDGET_INFO(fsact, "Fujitsu Siemens Activy Budget-T PCI (rev GR/Grundig frontend)", BUDGET_FS_ACTIVY); 830 MAKE_BUDGET_INFO(fsact1, "Fujitsu Siemens Activy Budget-T PCI (rev AL/ALPS TDHD1-204A)", BUDGET_FS_ACTIVY); 831 MAKE_BUDGET_INFO(omicom, "Omicom S2 PCI", BUDGET_TT); 832 MAKE_BUDGET_INFO(sylt, "Philips Semi Sylt PCI", BUDGET_TT_HW_DISEQC); 833 834 static const struct pci_device_id pci_tbl[] = { 835 MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1003), 836 MAKE_EXTENSION_PCI(ttbc, 0x13c2, 0x1004), 837 MAKE_EXTENSION_PCI(ttbt, 0x13c2, 0x1005), 838 MAKE_EXTENSION_PCI(satel, 0x13c2, 0x1013), 839 MAKE_EXTENSION_PCI(ttbs, 0x13c2, 0x1016), 840 MAKE_EXTENSION_PCI(ttbs1401, 0x13c2, 0x1018), 841 MAKE_EXTENSION_PCI(tt1600, 0x13c2, 0x101c), 842 MAKE_EXTENSION_PCI(fsacs1,0x1131, 0x4f60), 843 MAKE_EXTENSION_PCI(fsacs0,0x1131, 0x4f61), 844 MAKE_EXTENSION_PCI(fsact1, 0x1131, 0x5f60), 845 MAKE_EXTENSION_PCI(fsact, 0x1131, 0x5f61), 846 MAKE_EXTENSION_PCI(omicom, 0x14c4, 0x1020), 847 MAKE_EXTENSION_PCI(sylt, 0x1131, 0x4f52), 848 { 849 .vendor = 0, 850 } 851 }; 852 853 MODULE_DEVICE_TABLE(pci, pci_tbl); 854 855 static struct saa7146_extension budget_extension = { 856 .name = "budget dvb", 857 .flags = SAA7146_USE_I2C_IRQ, 858 859 .module = THIS_MODULE, 860 .pci_tbl = pci_tbl, 861 .attach = budget_attach, 862 .detach = budget_detach, 863 864 .irq_mask = MASK_10, 865 .irq_func = ttpci_budget_irq10_handler, 866 }; 867 868 static int __init budget_init(void) 869 { 870 return saa7146_register_extension(&budget_extension); 871 } 872 873 static void __exit budget_exit(void) 874 { 875 saa7146_unregister_extension(&budget_extension); 876 } 877 878 module_init(budget_init); 879 module_exit(budget_exit); 880 881 MODULE_LICENSE("GPL"); 882 MODULE_AUTHOR("Ralph Metzler, Marcus Metzler, Michael Hunold, others"); 883 MODULE_DESCRIPTION("driver for the SAA7146 based so-called budget PCI DVB cards by Siemens, Technotrend, Hauppauge"); 884