1 /* 2 * budget-ci.c: driver for the SAA7146 based Budget DVB cards 3 * 4 * Compiled from various sources by Michael Hunold <michael@mihu.de> 5 * 6 * msp430 IR support contributed by Jack Thomasson <jkt@Helius.COM> 7 * partially based on the Siemens DVB driver by Ralph+Marcus Metzler 8 * 9 * CI interface support (c) 2004 Andrew de Quincey <adq_dvb@lidskialf.net> 10 * 11 * This program is free software; you can redistribute it and/or 12 * modify it under the terms of the GNU General Public License 13 * as published by the Free Software Foundation; either version 2 14 * of the License, or (at your option) any later version. 15 * 16 * 17 * This program is distributed in the hope that it will be useful, 18 * but WITHOUT ANY WARRANTY; without even the implied warranty of 19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 * GNU General Public License for more details. 21 * 22 * 23 * You should have received a copy of the GNU General Public License 24 * along with this program; if not, write to the Free Software 25 * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. 26 * Or, point your browser to http://www.gnu.org/copyleft/gpl.html 27 * 28 * 29 * the project's page is at https://linuxtv.org 30 */ 31 32 #include <linux/module.h> 33 #include <linux/errno.h> 34 #include <linux/slab.h> 35 #include <linux/interrupt.h> 36 #include <linux/spinlock.h> 37 #include <media/rc-core.h> 38 39 #include "budget.h" 40 41 #include "dvb_ca_en50221.h" 42 #include "stv0299.h" 43 #include "stv0297.h" 44 #include "tda1004x.h" 45 #include "stb0899_drv.h" 46 #include "stb0899_reg.h" 47 #include "stb0899_cfg.h" 48 #include "stb6100.h" 49 #include "stb6100_cfg.h" 50 #include "lnbp21.h" 51 #include "bsbe1.h" 52 #include "bsru6.h" 53 #include "tda1002x.h" 54 #include "tda827x.h" 55 #include "bsbe1-d01a.h" 56 57 #define MODULE_NAME "budget_ci" 58 59 /* 60 * Regarding DEBIADDR_IR: 61 * Some CI modules hang if random addresses are read. 62 * Using address 0x4000 for the IR read means that we 63 * use the same address as for CI version, which should 64 * be a safe default. 65 */ 66 #define DEBIADDR_IR 0x4000 67 #define DEBIADDR_CICONTROL 0x0000 68 #define DEBIADDR_CIVERSION 0x4000 69 #define DEBIADDR_IO 0x1000 70 #define DEBIADDR_ATTR 0x3000 71 72 #define CICONTROL_RESET 0x01 73 #define CICONTROL_ENABLETS 0x02 74 #define CICONTROL_CAMDETECT 0x08 75 76 #define DEBICICTL 0x00420000 77 #define DEBICICAM 0x02420000 78 79 #define SLOTSTATUS_NONE 1 80 #define SLOTSTATUS_PRESENT 2 81 #define SLOTSTATUS_RESET 4 82 #define SLOTSTATUS_READY 8 83 #define SLOTSTATUS_OCCUPIED (SLOTSTATUS_PRESENT|SLOTSTATUS_RESET|SLOTSTATUS_READY) 84 85 /* RC5 device wildcard */ 86 #define IR_DEVICE_ANY 255 87 88 static int rc5_device = -1; 89 module_param(rc5_device, int, 0644); 90 MODULE_PARM_DESC(rc5_device, "only IR commands to given RC5 device (device = 0 - 31, any device = 255, default: autodetect)"); 91 92 static int ir_debug; 93 module_param(ir_debug, int, 0644); 94 MODULE_PARM_DESC(ir_debug, "enable debugging information for IR decoding"); 95 96 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); 97 98 struct budget_ci_ir { 99 struct rc_dev *dev; 100 struct tasklet_struct msp430_irq_tasklet; 101 char name[72]; /* 40 + 32 for (struct saa7146_dev).name */ 102 char phys[32]; 103 int rc5_device; 104 u32 ir_key; 105 bool have_command; 106 bool full_rc5; /* Outputs a full RC5 code */ 107 }; 108 109 struct budget_ci { 110 struct budget budget; 111 struct tasklet_struct ciintf_irq_tasklet; 112 int slot_status; 113 int ci_irq; 114 struct dvb_ca_en50221 ca; 115 struct budget_ci_ir ir; 116 u8 tuner_pll_address; /* used for philips_tdm1316l configs */ 117 }; 118 119 static void msp430_ir_interrupt(unsigned long data) 120 { 121 struct budget_ci *budget_ci = (struct budget_ci *) data; 122 struct rc_dev *dev = budget_ci->ir.dev; 123 u32 command = ttpci_budget_debiread(&budget_ci->budget, DEBINOSWAP, DEBIADDR_IR, 2, 1, 0) >> 8; 124 125 /* 126 * The msp430 chip can generate two different bytes, command and device 127 * 128 * type1: X1CCCCCC, C = command bits (0 - 63) 129 * type2: X0TDDDDD, D = device bits (0 - 31), T = RC5 toggle bit 130 * 131 * Each signal from the remote control can generate one or more command 132 * bytes and one or more device bytes. For the repeated bytes, the 133 * highest bit (X) is set. The first command byte is always generated 134 * before the first device byte. Other than that, no specific order 135 * seems to apply. To make life interesting, bytes can also be lost. 136 * 137 * Only when we have a command and device byte, a keypress is 138 * generated. 139 */ 140 141 if (ir_debug) 142 printk("budget_ci: received byte 0x%02x\n", command); 143 144 /* Remove repeat bit, we use every command */ 145 command = command & 0x7f; 146 147 /* Is this a RC5 command byte? */ 148 if (command & 0x40) { 149 budget_ci->ir.have_command = true; 150 budget_ci->ir.ir_key = command & 0x3f; 151 return; 152 } 153 154 /* It's a RC5 device byte */ 155 if (!budget_ci->ir.have_command) 156 return; 157 budget_ci->ir.have_command = false; 158 159 if (budget_ci->ir.rc5_device != IR_DEVICE_ANY && 160 budget_ci->ir.rc5_device != (command & 0x1f)) 161 return; 162 163 if (budget_ci->ir.full_rc5) { 164 rc_keydown(dev, RC_TYPE_RC5, 165 RC_SCANCODE_RC5(budget_ci->ir.rc5_device, budget_ci->ir.ir_key), 166 !!(command & 0x20)); 167 return; 168 } 169 170 /* FIXME: We should generate complete scancodes for all devices */ 171 rc_keydown(dev, RC_TYPE_UNKNOWN, budget_ci->ir.ir_key, !!(command & 0x20)); 172 } 173 174 static int msp430_ir_init(struct budget_ci *budget_ci) 175 { 176 struct saa7146_dev *saa = budget_ci->budget.dev; 177 struct rc_dev *dev; 178 int error; 179 180 dev = rc_allocate_device(); 181 if (!dev) { 182 printk(KERN_ERR "budget_ci: IR interface initialisation failed\n"); 183 return -ENOMEM; 184 } 185 186 snprintf(budget_ci->ir.name, sizeof(budget_ci->ir.name), 187 "Budget-CI dvb ir receiver %s", saa->name); 188 snprintf(budget_ci->ir.phys, sizeof(budget_ci->ir.phys), 189 "pci-%s/ir0", pci_name(saa->pci)); 190 191 dev->driver_name = MODULE_NAME; 192 dev->input_name = budget_ci->ir.name; 193 dev->input_phys = budget_ci->ir.phys; 194 dev->input_id.bustype = BUS_PCI; 195 dev->input_id.version = 1; 196 if (saa->pci->subsystem_vendor) { 197 dev->input_id.vendor = saa->pci->subsystem_vendor; 198 dev->input_id.product = saa->pci->subsystem_device; 199 } else { 200 dev->input_id.vendor = saa->pci->vendor; 201 dev->input_id.product = saa->pci->device; 202 } 203 dev->dev.parent = &saa->pci->dev; 204 205 if (rc5_device < 0) 206 budget_ci->ir.rc5_device = IR_DEVICE_ANY; 207 else 208 budget_ci->ir.rc5_device = rc5_device; 209 210 /* Select keymap and address */ 211 switch (budget_ci->budget.dev->pci->subsystem_device) { 212 case 0x100c: 213 case 0x100f: 214 case 0x1011: 215 case 0x1012: 216 /* The hauppauge keymap is a superset of these remotes */ 217 dev->map_name = RC_MAP_HAUPPAUGE; 218 budget_ci->ir.full_rc5 = true; 219 220 if (rc5_device < 0) 221 budget_ci->ir.rc5_device = 0x1f; 222 break; 223 case 0x1010: 224 case 0x1017: 225 case 0x1019: 226 case 0x101a: 227 case 0x101b: 228 /* for the Technotrend 1500 bundled remote */ 229 dev->map_name = RC_MAP_TT_1500; 230 break; 231 default: 232 /* unknown remote */ 233 dev->map_name = RC_MAP_BUDGET_CI_OLD; 234 break; 235 } 236 if (!budget_ci->ir.full_rc5) 237 dev->scancode_mask = 0xff; 238 239 error = rc_register_device(dev); 240 if (error) { 241 printk(KERN_ERR "budget_ci: could not init driver for IR device (code %d)\n", error); 242 rc_free_device(dev); 243 return error; 244 } 245 246 budget_ci->ir.dev = dev; 247 248 tasklet_init(&budget_ci->ir.msp430_irq_tasklet, msp430_ir_interrupt, 249 (unsigned long) budget_ci); 250 251 SAA7146_IER_ENABLE(saa, MASK_06); 252 saa7146_setgpio(saa, 3, SAA7146_GPIO_IRQHI); 253 254 return 0; 255 } 256 257 static void msp430_ir_deinit(struct budget_ci *budget_ci) 258 { 259 struct saa7146_dev *saa = budget_ci->budget.dev; 260 261 SAA7146_IER_DISABLE(saa, MASK_06); 262 saa7146_setgpio(saa, 3, SAA7146_GPIO_INPUT); 263 tasklet_kill(&budget_ci->ir.msp430_irq_tasklet); 264 265 rc_unregister_device(budget_ci->ir.dev); 266 } 267 268 static int ciintf_read_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address) 269 { 270 struct budget_ci *budget_ci = (struct budget_ci *) ca->data; 271 272 if (slot != 0) 273 return -EINVAL; 274 275 return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM, 276 DEBIADDR_ATTR | (address & 0xfff), 1, 1, 0); 277 } 278 279 static int ciintf_write_attribute_mem(struct dvb_ca_en50221 *ca, int slot, int address, u8 value) 280 { 281 struct budget_ci *budget_ci = (struct budget_ci *) ca->data; 282 283 if (slot != 0) 284 return -EINVAL; 285 286 return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM, 287 DEBIADDR_ATTR | (address & 0xfff), 1, value, 1, 0); 288 } 289 290 static int ciintf_read_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address) 291 { 292 struct budget_ci *budget_ci = (struct budget_ci *) ca->data; 293 294 if (slot != 0) 295 return -EINVAL; 296 297 return ttpci_budget_debiread(&budget_ci->budget, DEBICICAM, 298 DEBIADDR_IO | (address & 3), 1, 1, 0); 299 } 300 301 static int ciintf_write_cam_control(struct dvb_ca_en50221 *ca, int slot, u8 address, u8 value) 302 { 303 struct budget_ci *budget_ci = (struct budget_ci *) ca->data; 304 305 if (slot != 0) 306 return -EINVAL; 307 308 return ttpci_budget_debiwrite(&budget_ci->budget, DEBICICAM, 309 DEBIADDR_IO | (address & 3), 1, value, 1, 0); 310 } 311 312 static int ciintf_slot_reset(struct dvb_ca_en50221 *ca, int slot) 313 { 314 struct budget_ci *budget_ci = (struct budget_ci *) ca->data; 315 struct saa7146_dev *saa = budget_ci->budget.dev; 316 317 if (slot != 0) 318 return -EINVAL; 319 320 if (budget_ci->ci_irq) { 321 // trigger on RISING edge during reset so we know when READY is re-asserted 322 saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); 323 } 324 budget_ci->slot_status = SLOTSTATUS_RESET; 325 ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0); 326 msleep(1); 327 ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 328 CICONTROL_RESET, 1, 0); 329 330 saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI); 331 ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); 332 return 0; 333 } 334 335 static int ciintf_slot_shutdown(struct dvb_ca_en50221 *ca, int slot) 336 { 337 struct budget_ci *budget_ci = (struct budget_ci *) ca->data; 338 struct saa7146_dev *saa = budget_ci->budget.dev; 339 340 if (slot != 0) 341 return -EINVAL; 342 343 saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTHI); 344 ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTB); 345 return 0; 346 } 347 348 static int ciintf_slot_ts_enable(struct dvb_ca_en50221 *ca, int slot) 349 { 350 struct budget_ci *budget_ci = (struct budget_ci *) ca->data; 351 struct saa7146_dev *saa = budget_ci->budget.dev; 352 int tmp; 353 354 if (slot != 0) 355 return -EINVAL; 356 357 saa7146_setgpio(saa, 1, SAA7146_GPIO_OUTLO); 358 359 tmp = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); 360 ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 361 tmp | CICONTROL_ENABLETS, 1, 0); 362 363 ttpci_budget_set_video_port(saa, BUDGET_VIDEO_PORTA); 364 return 0; 365 } 366 367 static void ciintf_interrupt(unsigned long data) 368 { 369 struct budget_ci *budget_ci = (struct budget_ci *) data; 370 struct saa7146_dev *saa = budget_ci->budget.dev; 371 unsigned int flags; 372 373 // ensure we don't get spurious IRQs during initialisation 374 if (!budget_ci->budget.ci_present) 375 return; 376 377 // read the CAM status 378 flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); 379 if (flags & CICONTROL_CAMDETECT) { 380 381 // GPIO should be set to trigger on falling edge if a CAM is present 382 saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO); 383 384 if (budget_ci->slot_status & SLOTSTATUS_NONE) { 385 // CAM insertion IRQ 386 budget_ci->slot_status = SLOTSTATUS_PRESENT; 387 dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, 388 DVB_CA_EN50221_CAMCHANGE_INSERTED); 389 390 } else if (budget_ci->slot_status & SLOTSTATUS_RESET) { 391 // CAM ready (reset completed) 392 budget_ci->slot_status = SLOTSTATUS_READY; 393 dvb_ca_en50221_camready_irq(&budget_ci->ca, 0); 394 395 } else if (budget_ci->slot_status & SLOTSTATUS_READY) { 396 // FR/DA IRQ 397 dvb_ca_en50221_frda_irq(&budget_ci->ca, 0); 398 } 399 } else { 400 401 // trigger on rising edge if a CAM is not present - when a CAM is inserted, we 402 // only want to get the IRQ when it sets READY. If we trigger on the falling edge, 403 // the CAM might not actually be ready yet. 404 saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); 405 406 // generate a CAM removal IRQ if we haven't already 407 if (budget_ci->slot_status & SLOTSTATUS_OCCUPIED) { 408 // CAM removal IRQ 409 budget_ci->slot_status = SLOTSTATUS_NONE; 410 dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, 411 DVB_CA_EN50221_CAMCHANGE_REMOVED); 412 } 413 } 414 } 415 416 static int ciintf_poll_slot_status(struct dvb_ca_en50221 *ca, int slot, int open) 417 { 418 struct budget_ci *budget_ci = (struct budget_ci *) ca->data; 419 unsigned int flags; 420 421 // ensure we don't get spurious IRQs during initialisation 422 if (!budget_ci->budget.ci_present) 423 return -EINVAL; 424 425 // read the CAM status 426 flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); 427 if (flags & CICONTROL_CAMDETECT) { 428 // mark it as present if it wasn't before 429 if (budget_ci->slot_status & SLOTSTATUS_NONE) { 430 budget_ci->slot_status = SLOTSTATUS_PRESENT; 431 } 432 433 // during a RESET, we check if we can read from IO memory to see when CAM is ready 434 if (budget_ci->slot_status & SLOTSTATUS_RESET) { 435 if (ciintf_read_attribute_mem(ca, slot, 0) == 0x1d) { 436 budget_ci->slot_status = SLOTSTATUS_READY; 437 } 438 } 439 } else { 440 budget_ci->slot_status = SLOTSTATUS_NONE; 441 } 442 443 if (budget_ci->slot_status != SLOTSTATUS_NONE) { 444 if (budget_ci->slot_status & SLOTSTATUS_READY) { 445 return DVB_CA_EN50221_POLL_CAM_PRESENT | DVB_CA_EN50221_POLL_CAM_READY; 446 } 447 return DVB_CA_EN50221_POLL_CAM_PRESENT; 448 } 449 450 return 0; 451 } 452 453 static int ciintf_init(struct budget_ci *budget_ci) 454 { 455 struct saa7146_dev *saa = budget_ci->budget.dev; 456 int flags; 457 int result; 458 int ci_version; 459 int ca_flags; 460 461 memset(&budget_ci->ca, 0, sizeof(struct dvb_ca_en50221)); 462 463 // enable DEBI pins 464 saa7146_write(saa, MC1, MASK_27 | MASK_11); 465 466 // test if it is there 467 ci_version = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CIVERSION, 1, 1, 0); 468 if ((ci_version & 0xa0) != 0xa0) { 469 result = -ENODEV; 470 goto error; 471 } 472 473 // determine whether a CAM is present or not 474 flags = ttpci_budget_debiread(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 1, 0); 475 budget_ci->slot_status = SLOTSTATUS_NONE; 476 if (flags & CICONTROL_CAMDETECT) 477 budget_ci->slot_status = SLOTSTATUS_PRESENT; 478 479 // version 0xa2 of the CI firmware doesn't generate interrupts 480 if (ci_version == 0xa2) { 481 ca_flags = 0; 482 budget_ci->ci_irq = 0; 483 } else { 484 ca_flags = DVB_CA_EN50221_FLAG_IRQ_CAMCHANGE | 485 DVB_CA_EN50221_FLAG_IRQ_FR | 486 DVB_CA_EN50221_FLAG_IRQ_DA; 487 budget_ci->ci_irq = 1; 488 } 489 490 // register CI interface 491 budget_ci->ca.owner = THIS_MODULE; 492 budget_ci->ca.read_attribute_mem = ciintf_read_attribute_mem; 493 budget_ci->ca.write_attribute_mem = ciintf_write_attribute_mem; 494 budget_ci->ca.read_cam_control = ciintf_read_cam_control; 495 budget_ci->ca.write_cam_control = ciintf_write_cam_control; 496 budget_ci->ca.slot_reset = ciintf_slot_reset; 497 budget_ci->ca.slot_shutdown = ciintf_slot_shutdown; 498 budget_ci->ca.slot_ts_enable = ciintf_slot_ts_enable; 499 budget_ci->ca.poll_slot_status = ciintf_poll_slot_status; 500 budget_ci->ca.data = budget_ci; 501 if ((result = dvb_ca_en50221_init(&budget_ci->budget.dvb_adapter, 502 &budget_ci->ca, 503 ca_flags, 1)) != 0) { 504 printk("budget_ci: CI interface detected, but initialisation failed.\n"); 505 goto error; 506 } 507 508 // Setup CI slot IRQ 509 if (budget_ci->ci_irq) { 510 tasklet_init(&budget_ci->ciintf_irq_tasklet, ciintf_interrupt, (unsigned long) budget_ci); 511 if (budget_ci->slot_status != SLOTSTATUS_NONE) { 512 saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQLO); 513 } else { 514 saa7146_setgpio(saa, 0, SAA7146_GPIO_IRQHI); 515 } 516 SAA7146_IER_ENABLE(saa, MASK_03); 517 } 518 519 // enable interface 520 ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 521 CICONTROL_RESET, 1, 0); 522 523 // success! 524 printk("budget_ci: CI interface initialised\n"); 525 budget_ci->budget.ci_present = 1; 526 527 // forge a fake CI IRQ so the CAM state is setup correctly 528 if (budget_ci->ci_irq) { 529 flags = DVB_CA_EN50221_CAMCHANGE_REMOVED; 530 if (budget_ci->slot_status != SLOTSTATUS_NONE) 531 flags = DVB_CA_EN50221_CAMCHANGE_INSERTED; 532 dvb_ca_en50221_camchange_irq(&budget_ci->ca, 0, flags); 533 } 534 535 return 0; 536 537 error: 538 saa7146_write(saa, MC1, MASK_27); 539 return result; 540 } 541 542 static void ciintf_deinit(struct budget_ci *budget_ci) 543 { 544 struct saa7146_dev *saa = budget_ci->budget.dev; 545 546 // disable CI interrupts 547 if (budget_ci->ci_irq) { 548 SAA7146_IER_DISABLE(saa, MASK_03); 549 saa7146_setgpio(saa, 0, SAA7146_GPIO_INPUT); 550 tasklet_kill(&budget_ci->ciintf_irq_tasklet); 551 } 552 553 // reset interface 554 ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 0, 1, 0); 555 msleep(1); 556 ttpci_budget_debiwrite(&budget_ci->budget, DEBICICTL, DEBIADDR_CICONTROL, 1, 557 CICONTROL_RESET, 1, 0); 558 559 // disable TS data stream to CI interface 560 saa7146_setgpio(saa, 1, SAA7146_GPIO_INPUT); 561 562 // release the CA device 563 dvb_ca_en50221_release(&budget_ci->ca); 564 565 // disable DEBI pins 566 saa7146_write(saa, MC1, MASK_27); 567 } 568 569 static void budget_ci_irq(struct saa7146_dev *dev, u32 * isr) 570 { 571 struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv; 572 573 dprintk(8, "dev: %p, budget_ci: %p\n", dev, budget_ci); 574 575 if (*isr & MASK_06) 576 tasklet_schedule(&budget_ci->ir.msp430_irq_tasklet); 577 578 if (*isr & MASK_10) 579 ttpci_budget_irq10_handler(dev, isr); 580 581 if ((*isr & MASK_03) && (budget_ci->budget.ci_present) && (budget_ci->ci_irq)) 582 tasklet_schedule(&budget_ci->ciintf_irq_tasklet); 583 } 584 585 static u8 philips_su1278_tt_inittab[] = { 586 0x01, 0x0f, 587 0x02, 0x30, 588 0x03, 0x00, 589 0x04, 0x5b, 590 0x05, 0x85, 591 0x06, 0x02, 592 0x07, 0x00, 593 0x08, 0x02, 594 0x09, 0x00, 595 0x0C, 0x01, 596 0x0D, 0x81, 597 0x0E, 0x44, 598 0x0f, 0x14, 599 0x10, 0x3c, 600 0x11, 0x84, 601 0x12, 0xda, 602 0x13, 0x97, 603 0x14, 0x95, 604 0x15, 0xc9, 605 0x16, 0x19, 606 0x17, 0x8c, 607 0x18, 0x59, 608 0x19, 0xf8, 609 0x1a, 0xfe, 610 0x1c, 0x7f, 611 0x1d, 0x00, 612 0x1e, 0x00, 613 0x1f, 0x50, 614 0x20, 0x00, 615 0x21, 0x00, 616 0x22, 0x00, 617 0x23, 0x00, 618 0x28, 0x00, 619 0x29, 0x28, 620 0x2a, 0x14, 621 0x2b, 0x0f, 622 0x2c, 0x09, 623 0x2d, 0x09, 624 0x31, 0x1f, 625 0x32, 0x19, 626 0x33, 0xfc, 627 0x34, 0x93, 628 0xff, 0xff 629 }; 630 631 static int philips_su1278_tt_set_symbol_rate(struct dvb_frontend *fe, u32 srate, u32 ratio) 632 { 633 stv0299_writereg(fe, 0x0e, 0x44); 634 if (srate >= 10000000) { 635 stv0299_writereg(fe, 0x13, 0x97); 636 stv0299_writereg(fe, 0x14, 0x95); 637 stv0299_writereg(fe, 0x15, 0xc9); 638 stv0299_writereg(fe, 0x17, 0x8c); 639 stv0299_writereg(fe, 0x1a, 0xfe); 640 stv0299_writereg(fe, 0x1c, 0x7f); 641 stv0299_writereg(fe, 0x2d, 0x09); 642 } else { 643 stv0299_writereg(fe, 0x13, 0x99); 644 stv0299_writereg(fe, 0x14, 0x8d); 645 stv0299_writereg(fe, 0x15, 0xce); 646 stv0299_writereg(fe, 0x17, 0x43); 647 stv0299_writereg(fe, 0x1a, 0x1d); 648 stv0299_writereg(fe, 0x1c, 0x12); 649 stv0299_writereg(fe, 0x2d, 0x05); 650 } 651 stv0299_writereg(fe, 0x0e, 0x23); 652 stv0299_writereg(fe, 0x0f, 0x94); 653 stv0299_writereg(fe, 0x10, 0x39); 654 stv0299_writereg(fe, 0x15, 0xc9); 655 656 stv0299_writereg(fe, 0x1f, (ratio >> 16) & 0xff); 657 stv0299_writereg(fe, 0x20, (ratio >> 8) & 0xff); 658 stv0299_writereg(fe, 0x21, (ratio) & 0xf0); 659 660 return 0; 661 } 662 663 static int philips_su1278_tt_tuner_set_params(struct dvb_frontend *fe) 664 { 665 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 666 struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; 667 u32 div; 668 u8 buf[4]; 669 struct i2c_msg msg = {.addr = 0x60,.flags = 0,.buf = buf,.len = sizeof(buf) }; 670 671 if ((p->frequency < 950000) || (p->frequency > 2150000)) 672 return -EINVAL; 673 674 div = (p->frequency + (500 - 1)) / 500; /* round correctly */ 675 buf[0] = (div >> 8) & 0x7f; 676 buf[1] = div & 0xff; 677 buf[2] = 0x80 | ((div & 0x18000) >> 10) | 2; 678 buf[3] = 0x20; 679 680 if (p->symbol_rate < 4000000) 681 buf[3] |= 1; 682 683 if (p->frequency < 1250000) 684 buf[3] |= 0; 685 else if (p->frequency < 1550000) 686 buf[3] |= 0x40; 687 else if (p->frequency < 2050000) 688 buf[3] |= 0x80; 689 else if (p->frequency < 2150000) 690 buf[3] |= 0xC0; 691 692 if (fe->ops.i2c_gate_ctrl) 693 fe->ops.i2c_gate_ctrl(fe, 1); 694 if (i2c_transfer(&budget_ci->budget.i2c_adap, &msg, 1) != 1) 695 return -EIO; 696 return 0; 697 } 698 699 static struct stv0299_config philips_su1278_tt_config = { 700 701 .demod_address = 0x68, 702 .inittab = philips_su1278_tt_inittab, 703 .mclk = 64000000UL, 704 .invert = 0, 705 .skip_reinit = 1, 706 .lock_output = STV0299_LOCKOUTPUT_1, 707 .volt13_op0_op1 = STV0299_VOLT13_OP1, 708 .min_delay_ms = 50, 709 .set_symbol_rate = philips_su1278_tt_set_symbol_rate, 710 }; 711 712 713 714 static int philips_tdm1316l_tuner_init(struct dvb_frontend *fe) 715 { 716 struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; 717 static u8 td1316_init[] = { 0x0b, 0xf5, 0x85, 0xab }; 718 static u8 disable_mc44BC374c[] = { 0x1d, 0x74, 0xa0, 0x68 }; 719 struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = td1316_init,.len = 720 sizeof(td1316_init) }; 721 722 // setup PLL configuration 723 if (fe->ops.i2c_gate_ctrl) 724 fe->ops.i2c_gate_ctrl(fe, 1); 725 if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) 726 return -EIO; 727 msleep(1); 728 729 // disable the mc44BC374c (do not check for errors) 730 tuner_msg.addr = 0x65; 731 tuner_msg.buf = disable_mc44BC374c; 732 tuner_msg.len = sizeof(disable_mc44BC374c); 733 if (fe->ops.i2c_gate_ctrl) 734 fe->ops.i2c_gate_ctrl(fe, 1); 735 if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) { 736 if (fe->ops.i2c_gate_ctrl) 737 fe->ops.i2c_gate_ctrl(fe, 1); 738 i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1); 739 } 740 741 return 0; 742 } 743 744 static int philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe) 745 { 746 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 747 struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; 748 u8 tuner_buf[4]; 749 struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address,.flags = 0,.buf = tuner_buf,.len = sizeof(tuner_buf) }; 750 int tuner_frequency = 0; 751 u8 band, cp, filter; 752 753 // determine charge pump 754 tuner_frequency = p->frequency + 36130000; 755 if (tuner_frequency < 87000000) 756 return -EINVAL; 757 else if (tuner_frequency < 130000000) 758 cp = 3; 759 else if (tuner_frequency < 160000000) 760 cp = 5; 761 else if (tuner_frequency < 200000000) 762 cp = 6; 763 else if (tuner_frequency < 290000000) 764 cp = 3; 765 else if (tuner_frequency < 420000000) 766 cp = 5; 767 else if (tuner_frequency < 480000000) 768 cp = 6; 769 else if (tuner_frequency < 620000000) 770 cp = 3; 771 else if (tuner_frequency < 830000000) 772 cp = 5; 773 else if (tuner_frequency < 895000000) 774 cp = 7; 775 else 776 return -EINVAL; 777 778 // determine band 779 if (p->frequency < 49000000) 780 return -EINVAL; 781 else if (p->frequency < 159000000) 782 band = 1; 783 else if (p->frequency < 444000000) 784 band = 2; 785 else if (p->frequency < 861000000) 786 band = 4; 787 else 788 return -EINVAL; 789 790 // setup PLL filter and TDA9889 791 switch (p->bandwidth_hz) { 792 case 6000000: 793 tda1004x_writereg(fe, 0x0C, 0x14); 794 filter = 0; 795 break; 796 797 case 7000000: 798 tda1004x_writereg(fe, 0x0C, 0x80); 799 filter = 0; 800 break; 801 802 case 8000000: 803 tda1004x_writereg(fe, 0x0C, 0x14); 804 filter = 1; 805 break; 806 807 default: 808 return -EINVAL; 809 } 810 811 // calculate divisor 812 // ((36130000+((1000000/6)/2)) + Finput)/(1000000/6) 813 tuner_frequency = (((p->frequency / 1000) * 6) + 217280) / 1000; 814 815 // setup tuner buffer 816 tuner_buf[0] = tuner_frequency >> 8; 817 tuner_buf[1] = tuner_frequency & 0xff; 818 tuner_buf[2] = 0xca; 819 tuner_buf[3] = (cp << 5) | (filter << 3) | band; 820 821 if (fe->ops.i2c_gate_ctrl) 822 fe->ops.i2c_gate_ctrl(fe, 1); 823 if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) 824 return -EIO; 825 826 msleep(1); 827 return 0; 828 } 829 830 static int philips_tdm1316l_request_firmware(struct dvb_frontend *fe, 831 const struct firmware **fw, char *name) 832 { 833 struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; 834 835 return request_firmware(fw, name, &budget_ci->budget.dev->pci->dev); 836 } 837 838 static struct tda1004x_config philips_tdm1316l_config = { 839 840 .demod_address = 0x8, 841 .invert = 0, 842 .invert_oclk = 0, 843 .xtal_freq = TDA10046_XTAL_4M, 844 .agc_config = TDA10046_AGC_DEFAULT, 845 .if_freq = TDA10046_FREQ_3617, 846 .request_firmware = philips_tdm1316l_request_firmware, 847 }; 848 849 static struct tda1004x_config philips_tdm1316l_config_invert = { 850 851 .demod_address = 0x8, 852 .invert = 1, 853 .invert_oclk = 0, 854 .xtal_freq = TDA10046_XTAL_4M, 855 .agc_config = TDA10046_AGC_DEFAULT, 856 .if_freq = TDA10046_FREQ_3617, 857 .request_firmware = philips_tdm1316l_request_firmware, 858 }; 859 860 static int dvbc_philips_tdm1316l_tuner_set_params(struct dvb_frontend *fe) 861 { 862 struct dtv_frontend_properties *p = &fe->dtv_property_cache; 863 struct budget_ci *budget_ci = (struct budget_ci *) fe->dvb->priv; 864 u8 tuner_buf[5]; 865 struct i2c_msg tuner_msg = {.addr = budget_ci->tuner_pll_address, 866 .flags = 0, 867 .buf = tuner_buf, 868 .len = sizeof(tuner_buf) }; 869 int tuner_frequency = 0; 870 u8 band, cp, filter; 871 872 // determine charge pump 873 tuner_frequency = p->frequency + 36125000; 874 if (tuner_frequency < 87000000) 875 return -EINVAL; 876 else if (tuner_frequency < 130000000) { 877 cp = 3; 878 band = 1; 879 } else if (tuner_frequency < 160000000) { 880 cp = 5; 881 band = 1; 882 } else if (tuner_frequency < 200000000) { 883 cp = 6; 884 band = 1; 885 } else if (tuner_frequency < 290000000) { 886 cp = 3; 887 band = 2; 888 } else if (tuner_frequency < 420000000) { 889 cp = 5; 890 band = 2; 891 } else if (tuner_frequency < 480000000) { 892 cp = 6; 893 band = 2; 894 } else if (tuner_frequency < 620000000) { 895 cp = 3; 896 band = 4; 897 } else if (tuner_frequency < 830000000) { 898 cp = 5; 899 band = 4; 900 } else if (tuner_frequency < 895000000) { 901 cp = 7; 902 band = 4; 903 } else 904 return -EINVAL; 905 906 // assume PLL filter should always be 8MHz for the moment. 907 filter = 1; 908 909 // calculate divisor 910 tuner_frequency = (p->frequency + 36125000 + (62500/2)) / 62500; 911 912 // setup tuner buffer 913 tuner_buf[0] = tuner_frequency >> 8; 914 tuner_buf[1] = tuner_frequency & 0xff; 915 tuner_buf[2] = 0xc8; 916 tuner_buf[3] = (cp << 5) | (filter << 3) | band; 917 tuner_buf[4] = 0x80; 918 919 if (fe->ops.i2c_gate_ctrl) 920 fe->ops.i2c_gate_ctrl(fe, 1); 921 if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) 922 return -EIO; 923 924 msleep(50); 925 926 if (fe->ops.i2c_gate_ctrl) 927 fe->ops.i2c_gate_ctrl(fe, 1); 928 if (i2c_transfer(&budget_ci->budget.i2c_adap, &tuner_msg, 1) != 1) 929 return -EIO; 930 931 msleep(1); 932 933 return 0; 934 } 935 936 static u8 dvbc_philips_tdm1316l_inittab[] = { 937 0x80, 0x01, 938 0x80, 0x00, 939 0x81, 0x01, 940 0x81, 0x00, 941 0x00, 0x09, 942 0x01, 0x69, 943 0x03, 0x00, 944 0x04, 0x00, 945 0x07, 0x00, 946 0x08, 0x00, 947 0x20, 0x00, 948 0x21, 0x40, 949 0x22, 0x00, 950 0x23, 0x00, 951 0x24, 0x40, 952 0x25, 0x88, 953 0x30, 0xff, 954 0x31, 0x00, 955 0x32, 0xff, 956 0x33, 0x00, 957 0x34, 0x50, 958 0x35, 0x7f, 959 0x36, 0x00, 960 0x37, 0x20, 961 0x38, 0x00, 962 0x40, 0x1c, 963 0x41, 0xff, 964 0x42, 0x29, 965 0x43, 0x20, 966 0x44, 0xff, 967 0x45, 0x00, 968 0x46, 0x00, 969 0x49, 0x04, 970 0x4a, 0x00, 971 0x4b, 0x7b, 972 0x52, 0x30, 973 0x55, 0xae, 974 0x56, 0x47, 975 0x57, 0xe1, 976 0x58, 0x3a, 977 0x5a, 0x1e, 978 0x5b, 0x34, 979 0x60, 0x00, 980 0x63, 0x00, 981 0x64, 0x00, 982 0x65, 0x00, 983 0x66, 0x00, 984 0x67, 0x00, 985 0x68, 0x00, 986 0x69, 0x00, 987 0x6a, 0x02, 988 0x6b, 0x00, 989 0x70, 0xff, 990 0x71, 0x00, 991 0x72, 0x00, 992 0x73, 0x00, 993 0x74, 0x0c, 994 0x80, 0x00, 995 0x81, 0x00, 996 0x82, 0x00, 997 0x83, 0x00, 998 0x84, 0x04, 999 0x85, 0x80, 1000 0x86, 0x24, 1001 0x87, 0x78, 1002 0x88, 0x10, 1003 0x89, 0x00, 1004 0x90, 0x01, 1005 0x91, 0x01, 1006 0xa0, 0x04, 1007 0xa1, 0x00, 1008 0xa2, 0x00, 1009 0xb0, 0x91, 1010 0xb1, 0x0b, 1011 0xc0, 0x53, 1012 0xc1, 0x70, 1013 0xc2, 0x12, 1014 0xd0, 0x00, 1015 0xd1, 0x00, 1016 0xd2, 0x00, 1017 0xd3, 0x00, 1018 0xd4, 0x00, 1019 0xd5, 0x00, 1020 0xde, 0x00, 1021 0xdf, 0x00, 1022 0x61, 0x38, 1023 0x62, 0x0a, 1024 0x53, 0x13, 1025 0x59, 0x08, 1026 0xff, 0xff, 1027 }; 1028 1029 static struct stv0297_config dvbc_philips_tdm1316l_config = { 1030 .demod_address = 0x1c, 1031 .inittab = dvbc_philips_tdm1316l_inittab, 1032 .invert = 0, 1033 .stop_during_read = 1, 1034 }; 1035 1036 static struct tda10023_config tda10023_config = { 1037 .demod_address = 0xc, 1038 .invert = 0, 1039 .xtal = 16000000, 1040 .pll_m = 11, 1041 .pll_p = 3, 1042 .pll_n = 1, 1043 .deltaf = 0xa511, 1044 }; 1045 1046 static struct tda827x_config tda827x_config = { 1047 .config = 0, 1048 }; 1049 1050 /* TT S2-3200 DVB-S (STB0899) Inittab */ 1051 static const struct stb0899_s1_reg tt3200_stb0899_s1_init_1[] = { 1052 1053 { STB0899_DEV_ID , 0x81 }, 1054 { STB0899_DISCNTRL1 , 0x32 }, 1055 { STB0899_DISCNTRL2 , 0x80 }, 1056 { STB0899_DISRX_ST0 , 0x04 }, 1057 { STB0899_DISRX_ST1 , 0x00 }, 1058 { STB0899_DISPARITY , 0x00 }, 1059 { STB0899_DISSTATUS , 0x20 }, 1060 { STB0899_DISF22 , 0x8c }, 1061 { STB0899_DISF22RX , 0x9a }, 1062 { STB0899_SYSREG , 0x0b }, 1063 { STB0899_ACRPRESC , 0x11 }, 1064 { STB0899_ACRDIV1 , 0x0a }, 1065 { STB0899_ACRDIV2 , 0x05 }, 1066 { STB0899_DACR1 , 0x00 }, 1067 { STB0899_DACR2 , 0x00 }, 1068 { STB0899_OUTCFG , 0x00 }, 1069 { STB0899_MODECFG , 0x00 }, 1070 { STB0899_IRQSTATUS_3 , 0x30 }, 1071 { STB0899_IRQSTATUS_2 , 0x00 }, 1072 { STB0899_IRQSTATUS_1 , 0x00 }, 1073 { STB0899_IRQSTATUS_0 , 0x00 }, 1074 { STB0899_IRQMSK_3 , 0xf3 }, 1075 { STB0899_IRQMSK_2 , 0xfc }, 1076 { STB0899_IRQMSK_1 , 0xff }, 1077 { STB0899_IRQMSK_0 , 0xff }, 1078 { STB0899_IRQCFG , 0x00 }, 1079 { STB0899_I2CCFG , 0x88 }, 1080 { STB0899_I2CRPT , 0x48 }, /* 12k Pullup, Repeater=16, Stop=disabled */ 1081 { STB0899_IOPVALUE5 , 0x00 }, 1082 { STB0899_IOPVALUE4 , 0x20 }, 1083 { STB0899_IOPVALUE3 , 0xc9 }, 1084 { STB0899_IOPVALUE2 , 0x90 }, 1085 { STB0899_IOPVALUE1 , 0x40 }, 1086 { STB0899_IOPVALUE0 , 0x00 }, 1087 { STB0899_GPIO00CFG , 0x82 }, 1088 { STB0899_GPIO01CFG , 0x82 }, 1089 { STB0899_GPIO02CFG , 0x82 }, 1090 { STB0899_GPIO03CFG , 0x82 }, 1091 { STB0899_GPIO04CFG , 0x82 }, 1092 { STB0899_GPIO05CFG , 0x82 }, 1093 { STB0899_GPIO06CFG , 0x82 }, 1094 { STB0899_GPIO07CFG , 0x82 }, 1095 { STB0899_GPIO08CFG , 0x82 }, 1096 { STB0899_GPIO09CFG , 0x82 }, 1097 { STB0899_GPIO10CFG , 0x82 }, 1098 { STB0899_GPIO11CFG , 0x82 }, 1099 { STB0899_GPIO12CFG , 0x82 }, 1100 { STB0899_GPIO13CFG , 0x82 }, 1101 { STB0899_GPIO14CFG , 0x82 }, 1102 { STB0899_GPIO15CFG , 0x82 }, 1103 { STB0899_GPIO16CFG , 0x82 }, 1104 { STB0899_GPIO17CFG , 0x82 }, 1105 { STB0899_GPIO18CFG , 0x82 }, 1106 { STB0899_GPIO19CFG , 0x82 }, 1107 { STB0899_GPIO20CFG , 0x82 }, 1108 { STB0899_SDATCFG , 0xb8 }, 1109 { STB0899_SCLTCFG , 0xba }, 1110 { STB0899_AGCRFCFG , 0x1c }, /* 0x11 */ 1111 { STB0899_GPIO22 , 0x82 }, /* AGCBB2CFG */ 1112 { STB0899_GPIO21 , 0x91 }, /* AGCBB1CFG */ 1113 { STB0899_DIRCLKCFG , 0x82 }, 1114 { STB0899_CLKOUT27CFG , 0x7e }, 1115 { STB0899_STDBYCFG , 0x82 }, 1116 { STB0899_CS0CFG , 0x82 }, 1117 { STB0899_CS1CFG , 0x82 }, 1118 { STB0899_DISEQCOCFG , 0x20 }, 1119 { STB0899_GPIO32CFG , 0x82 }, 1120 { STB0899_GPIO33CFG , 0x82 }, 1121 { STB0899_GPIO34CFG , 0x82 }, 1122 { STB0899_GPIO35CFG , 0x82 }, 1123 { STB0899_GPIO36CFG , 0x82 }, 1124 { STB0899_GPIO37CFG , 0x82 }, 1125 { STB0899_GPIO38CFG , 0x82 }, 1126 { STB0899_GPIO39CFG , 0x82 }, 1127 { STB0899_NCOARSE , 0x15 }, /* 0x15 = 27 Mhz Clock, F/3 = 198MHz, F/6 = 99MHz */ 1128 { STB0899_SYNTCTRL , 0x02 }, /* 0x00 = CLK from CLKI, 0x02 = CLK from XTALI */ 1129 { STB0899_FILTCTRL , 0x00 }, 1130 { STB0899_SYSCTRL , 0x00 }, 1131 { STB0899_STOPCLK1 , 0x20 }, 1132 { STB0899_STOPCLK2 , 0x00 }, 1133 { STB0899_INTBUFSTATUS , 0x00 }, 1134 { STB0899_INTBUFCTRL , 0x0a }, 1135 { 0xffff , 0xff }, 1136 }; 1137 1138 static const struct stb0899_s1_reg tt3200_stb0899_s1_init_3[] = { 1139 { STB0899_DEMOD , 0x00 }, 1140 { STB0899_RCOMPC , 0xc9 }, 1141 { STB0899_AGC1CN , 0x41 }, 1142 { STB0899_AGC1REF , 0x10 }, 1143 { STB0899_RTC , 0x7a }, 1144 { STB0899_TMGCFG , 0x4e }, 1145 { STB0899_AGC2REF , 0x34 }, 1146 { STB0899_TLSR , 0x84 }, 1147 { STB0899_CFD , 0xc7 }, 1148 { STB0899_ACLC , 0x87 }, 1149 { STB0899_BCLC , 0x94 }, 1150 { STB0899_EQON , 0x41 }, 1151 { STB0899_LDT , 0xdd }, 1152 { STB0899_LDT2 , 0xc9 }, 1153 { STB0899_EQUALREF , 0xb4 }, 1154 { STB0899_TMGRAMP , 0x10 }, 1155 { STB0899_TMGTHD , 0x30 }, 1156 { STB0899_IDCCOMP , 0xfb }, 1157 { STB0899_QDCCOMP , 0x03 }, 1158 { STB0899_POWERI , 0x3b }, 1159 { STB0899_POWERQ , 0x3d }, 1160 { STB0899_RCOMP , 0x81 }, 1161 { STB0899_AGCIQIN , 0x80 }, 1162 { STB0899_AGC2I1 , 0x04 }, 1163 { STB0899_AGC2I2 , 0xf5 }, 1164 { STB0899_TLIR , 0x25 }, 1165 { STB0899_RTF , 0x80 }, 1166 { STB0899_DSTATUS , 0x00 }, 1167 { STB0899_LDI , 0xca }, 1168 { STB0899_CFRM , 0xf1 }, 1169 { STB0899_CFRL , 0xf3 }, 1170 { STB0899_NIRM , 0x2a }, 1171 { STB0899_NIRL , 0x05 }, 1172 { STB0899_ISYMB , 0x17 }, 1173 { STB0899_QSYMB , 0xfa }, 1174 { STB0899_SFRH , 0x2f }, 1175 { STB0899_SFRM , 0x68 }, 1176 { STB0899_SFRL , 0x40 }, 1177 { STB0899_SFRUPH , 0x2f }, 1178 { STB0899_SFRUPM , 0x68 }, 1179 { STB0899_SFRUPL , 0x40 }, 1180 { STB0899_EQUAI1 , 0xfd }, 1181 { STB0899_EQUAQ1 , 0x04 }, 1182 { STB0899_EQUAI2 , 0x0f }, 1183 { STB0899_EQUAQ2 , 0xff }, 1184 { STB0899_EQUAI3 , 0xdf }, 1185 { STB0899_EQUAQ3 , 0xfa }, 1186 { STB0899_EQUAI4 , 0x37 }, 1187 { STB0899_EQUAQ4 , 0x0d }, 1188 { STB0899_EQUAI5 , 0xbd }, 1189 { STB0899_EQUAQ5 , 0xf7 }, 1190 { STB0899_DSTATUS2 , 0x00 }, 1191 { STB0899_VSTATUS , 0x00 }, 1192 { STB0899_VERROR , 0xff }, 1193 { STB0899_IQSWAP , 0x2a }, 1194 { STB0899_ECNT1M , 0x00 }, 1195 { STB0899_ECNT1L , 0x00 }, 1196 { STB0899_ECNT2M , 0x00 }, 1197 { STB0899_ECNT2L , 0x00 }, 1198 { STB0899_ECNT3M , 0x00 }, 1199 { STB0899_ECNT3L , 0x00 }, 1200 { STB0899_FECAUTO1 , 0x06 }, 1201 { STB0899_FECM , 0x01 }, 1202 { STB0899_VTH12 , 0xf0 }, 1203 { STB0899_VTH23 , 0xa0 }, 1204 { STB0899_VTH34 , 0x78 }, 1205 { STB0899_VTH56 , 0x4e }, 1206 { STB0899_VTH67 , 0x48 }, 1207 { STB0899_VTH78 , 0x38 }, 1208 { STB0899_PRVIT , 0xff }, 1209 { STB0899_VITSYNC , 0x19 }, 1210 { STB0899_RSULC , 0xb1 }, /* DVB = 0xb1, DSS = 0xa1 */ 1211 { STB0899_TSULC , 0x42 }, 1212 { STB0899_RSLLC , 0x40 }, 1213 { STB0899_TSLPL , 0x12 }, 1214 { STB0899_TSCFGH , 0x0c }, 1215 { STB0899_TSCFGM , 0x00 }, 1216 { STB0899_TSCFGL , 0x0c }, 1217 { STB0899_TSOUT , 0x4d }, /* 0x0d for CAM */ 1218 { STB0899_RSSYNCDEL , 0x00 }, 1219 { STB0899_TSINHDELH , 0x02 }, 1220 { STB0899_TSINHDELM , 0x00 }, 1221 { STB0899_TSINHDELL , 0x00 }, 1222 { STB0899_TSLLSTKM , 0x00 }, 1223 { STB0899_TSLLSTKL , 0x00 }, 1224 { STB0899_TSULSTKM , 0x00 }, 1225 { STB0899_TSULSTKL , 0xab }, 1226 { STB0899_PCKLENUL , 0x00 }, 1227 { STB0899_PCKLENLL , 0xcc }, 1228 { STB0899_RSPCKLEN , 0xcc }, 1229 { STB0899_TSSTATUS , 0x80 }, 1230 { STB0899_ERRCTRL1 , 0xb6 }, 1231 { STB0899_ERRCTRL2 , 0x96 }, 1232 { STB0899_ERRCTRL3 , 0x89 }, 1233 { STB0899_DMONMSK1 , 0x27 }, 1234 { STB0899_DMONMSK0 , 0x03 }, 1235 { STB0899_DEMAPVIT , 0x5c }, 1236 { STB0899_PLPARM , 0x1f }, 1237 { STB0899_PDELCTRL , 0x48 }, 1238 { STB0899_PDELCTRL2 , 0x00 }, 1239 { STB0899_BBHCTRL1 , 0x00 }, 1240 { STB0899_BBHCTRL2 , 0x00 }, 1241 { STB0899_HYSTTHRESH , 0x77 }, 1242 { STB0899_MATCSTM , 0x00 }, 1243 { STB0899_MATCSTL , 0x00 }, 1244 { STB0899_UPLCSTM , 0x00 }, 1245 { STB0899_UPLCSTL , 0x00 }, 1246 { STB0899_DFLCSTM , 0x00 }, 1247 { STB0899_DFLCSTL , 0x00 }, 1248 { STB0899_SYNCCST , 0x00 }, 1249 { STB0899_SYNCDCSTM , 0x00 }, 1250 { STB0899_SYNCDCSTL , 0x00 }, 1251 { STB0899_ISI_ENTRY , 0x00 }, 1252 { STB0899_ISI_BIT_EN , 0x00 }, 1253 { STB0899_MATSTRM , 0x00 }, 1254 { STB0899_MATSTRL , 0x00 }, 1255 { STB0899_UPLSTRM , 0x00 }, 1256 { STB0899_UPLSTRL , 0x00 }, 1257 { STB0899_DFLSTRM , 0x00 }, 1258 { STB0899_DFLSTRL , 0x00 }, 1259 { STB0899_SYNCSTR , 0x00 }, 1260 { STB0899_SYNCDSTRM , 0x00 }, 1261 { STB0899_SYNCDSTRL , 0x00 }, 1262 { STB0899_CFGPDELSTATUS1 , 0x10 }, 1263 { STB0899_CFGPDELSTATUS2 , 0x00 }, 1264 { STB0899_BBFERRORM , 0x00 }, 1265 { STB0899_BBFERRORL , 0x00 }, 1266 { STB0899_UPKTERRORM , 0x00 }, 1267 { STB0899_UPKTERRORL , 0x00 }, 1268 { 0xffff , 0xff }, 1269 }; 1270 1271 static struct stb0899_config tt3200_config = { 1272 .init_dev = tt3200_stb0899_s1_init_1, 1273 .init_s2_demod = stb0899_s2_init_2, 1274 .init_s1_demod = tt3200_stb0899_s1_init_3, 1275 .init_s2_fec = stb0899_s2_init_4, 1276 .init_tst = stb0899_s1_init_5, 1277 1278 .postproc = NULL, 1279 1280 .demod_address = 0x68, 1281 1282 .xtal_freq = 27000000, 1283 .inversion = IQ_SWAP_ON, 1284 1285 .lo_clk = 76500000, 1286 .hi_clk = 99000000, 1287 1288 .esno_ave = STB0899_DVBS2_ESNO_AVE, 1289 .esno_quant = STB0899_DVBS2_ESNO_QUANT, 1290 .avframes_coarse = STB0899_DVBS2_AVFRAMES_COARSE, 1291 .avframes_fine = STB0899_DVBS2_AVFRAMES_FINE, 1292 .miss_threshold = STB0899_DVBS2_MISS_THRESHOLD, 1293 .uwp_threshold_acq = STB0899_DVBS2_UWP_THRESHOLD_ACQ, 1294 .uwp_threshold_track = STB0899_DVBS2_UWP_THRESHOLD_TRACK, 1295 .uwp_threshold_sof = STB0899_DVBS2_UWP_THRESHOLD_SOF, 1296 .sof_search_timeout = STB0899_DVBS2_SOF_SEARCH_TIMEOUT, 1297 1298 .btr_nco_bits = STB0899_DVBS2_BTR_NCO_BITS, 1299 .btr_gain_shift_offset = STB0899_DVBS2_BTR_GAIN_SHIFT_OFFSET, 1300 .crl_nco_bits = STB0899_DVBS2_CRL_NCO_BITS, 1301 .ldpc_max_iter = STB0899_DVBS2_LDPC_MAX_ITER, 1302 1303 .tuner_get_frequency = stb6100_get_frequency, 1304 .tuner_set_frequency = stb6100_set_frequency, 1305 .tuner_set_bandwidth = stb6100_set_bandwidth, 1306 .tuner_get_bandwidth = stb6100_get_bandwidth, 1307 .tuner_set_rfsiggain = NULL 1308 }; 1309 1310 static struct stb6100_config tt3200_stb6100_config = { 1311 .tuner_address = 0x60, 1312 .refclock = 27000000, 1313 }; 1314 1315 static void frontend_init(struct budget_ci *budget_ci) 1316 { 1317 switch (budget_ci->budget.dev->pci->subsystem_device) { 1318 case 0x100c: // Hauppauge/TT Nova-CI budget (stv0299/ALPS BSRU6(tsa5059)) 1319 budget_ci->budget.dvb_frontend = 1320 dvb_attach(stv0299_attach, &alps_bsru6_config, &budget_ci->budget.i2c_adap); 1321 if (budget_ci->budget.dvb_frontend) { 1322 budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsru6_tuner_set_params; 1323 budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap; 1324 break; 1325 } 1326 break; 1327 1328 case 0x100f: // Hauppauge/TT Nova-CI budget (stv0299b/Philips su1278(tsa5059)) 1329 budget_ci->budget.dvb_frontend = 1330 dvb_attach(stv0299_attach, &philips_su1278_tt_config, &budget_ci->budget.i2c_adap); 1331 if (budget_ci->budget.dvb_frontend) { 1332 budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_su1278_tt_tuner_set_params; 1333 break; 1334 } 1335 break; 1336 1337 case 0x1010: // TT DVB-C CI budget (stv0297/Philips tdm1316l(tda6651tt)) 1338 budget_ci->tuner_pll_address = 0x61; 1339 budget_ci->budget.dvb_frontend = 1340 dvb_attach(stv0297_attach, &dvbc_philips_tdm1316l_config, &budget_ci->budget.i2c_adap); 1341 if (budget_ci->budget.dvb_frontend) { 1342 budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = dvbc_philips_tdm1316l_tuner_set_params; 1343 break; 1344 } 1345 break; 1346 1347 case 0x1011: // Hauppauge/TT Nova-T budget (tda10045/Philips tdm1316l(tda6651tt) + TDA9889) 1348 budget_ci->tuner_pll_address = 0x63; 1349 budget_ci->budget.dvb_frontend = 1350 dvb_attach(tda10045_attach, &philips_tdm1316l_config, &budget_ci->budget.i2c_adap); 1351 if (budget_ci->budget.dvb_frontend) { 1352 budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init; 1353 budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params; 1354 break; 1355 } 1356 break; 1357 1358 case 0x1012: // TT DVB-T CI budget (tda10046/Philips tdm1316l(tda6651tt)) 1359 budget_ci->tuner_pll_address = 0x60; 1360 budget_ci->budget.dvb_frontend = 1361 dvb_attach(tda10046_attach, &philips_tdm1316l_config_invert, &budget_ci->budget.i2c_adap); 1362 if (budget_ci->budget.dvb_frontend) { 1363 budget_ci->budget.dvb_frontend->ops.tuner_ops.init = philips_tdm1316l_tuner_init; 1364 budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = philips_tdm1316l_tuner_set_params; 1365 break; 1366 } 1367 break; 1368 1369 case 0x1017: // TT S-1500 PCI 1370 budget_ci->budget.dvb_frontend = dvb_attach(stv0299_attach, &alps_bsbe1_config, &budget_ci->budget.i2c_adap); 1371 if (budget_ci->budget.dvb_frontend) { 1372 budget_ci->budget.dvb_frontend->ops.tuner_ops.set_params = alps_bsbe1_tuner_set_params; 1373 budget_ci->budget.dvb_frontend->tuner_priv = &budget_ci->budget.i2c_adap; 1374 1375 budget_ci->budget.dvb_frontend->ops.dishnetwork_send_legacy_command = NULL; 1376 if (dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, LNBP21_LLC, 0) == NULL) { 1377 printk("%s: No LNBP21 found!\n", __func__); 1378 dvb_frontend_detach(budget_ci->budget.dvb_frontend); 1379 budget_ci->budget.dvb_frontend = NULL; 1380 } 1381 } 1382 break; 1383 1384 case 0x101a: /* TT Budget-C-1501 (philips tda10023/philips tda8274A) */ 1385 budget_ci->budget.dvb_frontend = dvb_attach(tda10023_attach, &tda10023_config, &budget_ci->budget.i2c_adap, 0x48); 1386 if (budget_ci->budget.dvb_frontend) { 1387 if (dvb_attach(tda827x_attach, budget_ci->budget.dvb_frontend, 0x61, &budget_ci->budget.i2c_adap, &tda827x_config) == NULL) { 1388 printk(KERN_ERR "%s: No tda827x found!\n", __func__); 1389 dvb_frontend_detach(budget_ci->budget.dvb_frontend); 1390 budget_ci->budget.dvb_frontend = NULL; 1391 } 1392 } 1393 break; 1394 1395 case 0x101b: /* TT S-1500B (BSBE1-D01A - STV0288/STB6000/LNBP21) */ 1396 budget_ci->budget.dvb_frontend = dvb_attach(stv0288_attach, &stv0288_bsbe1_d01a_config, &budget_ci->budget.i2c_adap); 1397 if (budget_ci->budget.dvb_frontend) { 1398 if (dvb_attach(stb6000_attach, budget_ci->budget.dvb_frontend, 0x63, &budget_ci->budget.i2c_adap)) { 1399 if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) { 1400 printk(KERN_ERR "%s: No LNBP21 found!\n", __func__); 1401 dvb_frontend_detach(budget_ci->budget.dvb_frontend); 1402 budget_ci->budget.dvb_frontend = NULL; 1403 } 1404 } else { 1405 printk(KERN_ERR "%s: No STB6000 found!\n", __func__); 1406 dvb_frontend_detach(budget_ci->budget.dvb_frontend); 1407 budget_ci->budget.dvb_frontend = NULL; 1408 } 1409 } 1410 break; 1411 1412 case 0x1019: // TT S2-3200 PCI 1413 /* 1414 * NOTE! on some STB0899 versions, the internal PLL takes a longer time 1415 * to settle, aka LOCK. On the older revisions of the chip, we don't see 1416 * this, as a result on the newer chips the entire clock tree, will not 1417 * be stable after a freshly POWER 'ed up situation. 1418 * In this case, we should RESET the STB0899 (Active LOW) and wait for 1419 * PLL stabilization. 1420 * 1421 * On the TT S2 3200 and clones, the STB0899 demodulator's RESETB is 1422 * connected to the SAA7146 GPIO, GPIO2, Pin 142 1423 */ 1424 /* Reset Demodulator */ 1425 saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTLO); 1426 /* Wait for everything to die */ 1427 msleep(50); 1428 /* Pull it up out of Reset state */ 1429 saa7146_setgpio(budget_ci->budget.dev, 2, SAA7146_GPIO_OUTHI); 1430 /* Wait for PLL to stabilize */ 1431 msleep(250); 1432 /* 1433 * PLL state should be stable now. Ideally, we should check 1434 * for PLL LOCK status. But well, never mind! 1435 */ 1436 budget_ci->budget.dvb_frontend = dvb_attach(stb0899_attach, &tt3200_config, &budget_ci->budget.i2c_adap); 1437 if (budget_ci->budget.dvb_frontend) { 1438 if (dvb_attach(stb6100_attach, budget_ci->budget.dvb_frontend, &tt3200_stb6100_config, &budget_ci->budget.i2c_adap)) { 1439 if (!dvb_attach(lnbp21_attach, budget_ci->budget.dvb_frontend, &budget_ci->budget.i2c_adap, 0, 0)) { 1440 printk("%s: No LNBP21 found!\n", __func__); 1441 dvb_frontend_detach(budget_ci->budget.dvb_frontend); 1442 budget_ci->budget.dvb_frontend = NULL; 1443 } 1444 } else { 1445 dvb_frontend_detach(budget_ci->budget.dvb_frontend); 1446 budget_ci->budget.dvb_frontend = NULL; 1447 } 1448 } 1449 break; 1450 1451 } 1452 1453 if (budget_ci->budget.dvb_frontend == NULL) { 1454 printk("budget-ci: A frontend driver was not found for device [%04x:%04x] subsystem [%04x:%04x]\n", 1455 budget_ci->budget.dev->pci->vendor, 1456 budget_ci->budget.dev->pci->device, 1457 budget_ci->budget.dev->pci->subsystem_vendor, 1458 budget_ci->budget.dev->pci->subsystem_device); 1459 } else { 1460 if (dvb_register_frontend 1461 (&budget_ci->budget.dvb_adapter, budget_ci->budget.dvb_frontend)) { 1462 printk("budget-ci: Frontend registration failed!\n"); 1463 dvb_frontend_detach(budget_ci->budget.dvb_frontend); 1464 budget_ci->budget.dvb_frontend = NULL; 1465 } 1466 } 1467 } 1468 1469 static int budget_ci_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) 1470 { 1471 struct budget_ci *budget_ci; 1472 int err; 1473 1474 budget_ci = kzalloc(sizeof(struct budget_ci), GFP_KERNEL); 1475 if (!budget_ci) { 1476 err = -ENOMEM; 1477 goto out1; 1478 } 1479 1480 dprintk(2, "budget_ci: %p\n", budget_ci); 1481 1482 dev->ext_priv = budget_ci; 1483 1484 err = ttpci_budget_init(&budget_ci->budget, dev, info, THIS_MODULE, 1485 adapter_nr); 1486 if (err) 1487 goto out2; 1488 1489 err = msp430_ir_init(budget_ci); 1490 if (err) 1491 goto out3; 1492 1493 ciintf_init(budget_ci); 1494 1495 budget_ci->budget.dvb_adapter.priv = budget_ci; 1496 frontend_init(budget_ci); 1497 1498 ttpci_budget_init_hooks(&budget_ci->budget); 1499 1500 return 0; 1501 1502 out3: 1503 ttpci_budget_deinit(&budget_ci->budget); 1504 out2: 1505 kfree(budget_ci); 1506 out1: 1507 return err; 1508 } 1509 1510 static int budget_ci_detach(struct saa7146_dev *dev) 1511 { 1512 struct budget_ci *budget_ci = (struct budget_ci *) dev->ext_priv; 1513 struct saa7146_dev *saa = budget_ci->budget.dev; 1514 int err; 1515 1516 if (budget_ci->budget.ci_present) 1517 ciintf_deinit(budget_ci); 1518 msp430_ir_deinit(budget_ci); 1519 if (budget_ci->budget.dvb_frontend) { 1520 dvb_unregister_frontend(budget_ci->budget.dvb_frontend); 1521 dvb_frontend_detach(budget_ci->budget.dvb_frontend); 1522 } 1523 err = ttpci_budget_deinit(&budget_ci->budget); 1524 1525 // disable frontend and CI interface 1526 saa7146_setgpio(saa, 2, SAA7146_GPIO_INPUT); 1527 1528 kfree(budget_ci); 1529 1530 return err; 1531 } 1532 1533 static struct saa7146_extension budget_extension; 1534 1535 MAKE_BUDGET_INFO(ttbs2, "TT-Budget/S-1500 PCI", BUDGET_TT); 1536 MAKE_BUDGET_INFO(ttbci, "TT-Budget/WinTV-NOVA-CI PCI", BUDGET_TT_HW_DISEQC); 1537 MAKE_BUDGET_INFO(ttbt2, "TT-Budget/WinTV-NOVA-T PCI", BUDGET_TT); 1538 MAKE_BUDGET_INFO(ttbtci, "TT-Budget-T-CI PCI", BUDGET_TT); 1539 MAKE_BUDGET_INFO(ttbcci, "TT-Budget-C-CI PCI", BUDGET_TT); 1540 MAKE_BUDGET_INFO(ttc1501, "TT-Budget C-1501 PCI", BUDGET_TT); 1541 MAKE_BUDGET_INFO(tt3200, "TT-Budget S2-3200 PCI", BUDGET_TT); 1542 MAKE_BUDGET_INFO(ttbs1500b, "TT-Budget S-1500B PCI", BUDGET_TT); 1543 1544 static struct pci_device_id pci_tbl[] = { 1545 MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100c), 1546 MAKE_EXTENSION_PCI(ttbci, 0x13c2, 0x100f), 1547 MAKE_EXTENSION_PCI(ttbcci, 0x13c2, 0x1010), 1548 MAKE_EXTENSION_PCI(ttbt2, 0x13c2, 0x1011), 1549 MAKE_EXTENSION_PCI(ttbtci, 0x13c2, 0x1012), 1550 MAKE_EXTENSION_PCI(ttbs2, 0x13c2, 0x1017), 1551 MAKE_EXTENSION_PCI(ttc1501, 0x13c2, 0x101a), 1552 MAKE_EXTENSION_PCI(tt3200, 0x13c2, 0x1019), 1553 MAKE_EXTENSION_PCI(ttbs1500b, 0x13c2, 0x101b), 1554 { 1555 .vendor = 0, 1556 } 1557 }; 1558 1559 MODULE_DEVICE_TABLE(pci, pci_tbl); 1560 1561 static struct saa7146_extension budget_extension = { 1562 .name = "budget_ci dvb", 1563 .flags = SAA7146_USE_I2C_IRQ, 1564 1565 .module = THIS_MODULE, 1566 .pci_tbl = &pci_tbl[0], 1567 .attach = budget_ci_attach, 1568 .detach = budget_ci_detach, 1569 1570 .irq_mask = MASK_03 | MASK_06 | MASK_10, 1571 .irq_func = budget_ci_irq, 1572 }; 1573 1574 static int __init budget_ci_init(void) 1575 { 1576 return saa7146_register_extension(&budget_extension); 1577 } 1578 1579 static void __exit budget_ci_exit(void) 1580 { 1581 saa7146_unregister_extension(&budget_extension); 1582 } 1583 1584 module_init(budget_ci_init); 1585 module_exit(budget_ci_exit); 1586 1587 MODULE_LICENSE("GPL"); 1588 MODULE_AUTHOR("Michael Hunold, Jack Thomasson, Andrew de Quincey, others"); 1589 MODULE_DESCRIPTION("driver for the SAA7146 based so-called " 1590 "budget PCI DVB cards w/ CI-module produced by " 1591 "Siemens, Technotrend, Hauppauge"); 1592