1 /* 2 * Copyright (C) 2010-2013 Bluecherry, LLC <http://www.bluecherrydvr.com> 3 * 4 * Original author: 5 * Ben Collins <bcollins@ubuntu.com> 6 * 7 * Additional work by: 8 * John Brooks <john.brooks@bluecherry.net> 9 * 10 * This program is free software; you can redistribute it and/or modify 11 * it under the terms of the GNU General Public License as published by 12 * the Free Software Foundation; either version 2 of the License, or 13 * (at your option) any later version. 14 * 15 * This program is distributed in the hope that it will be useful, 16 * but WITHOUT ANY WARRANTY; without even the implied warranty of 17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 18 * GNU General Public License for more details. 19 */ 20 21 #ifndef __SOLO6X10_H 22 #define __SOLO6X10_H 23 24 #include <linux/pci.h> 25 #include <linux/i2c.h> 26 #include <linux/mutex.h> 27 #include <linux/list.h> 28 #include <linux/wait.h> 29 #include <linux/stringify.h> 30 #include <linux/io.h> 31 #include <linux/atomic.h> 32 #include <linux/slab.h> 33 #include <linux/videodev2.h> 34 35 #include <media/v4l2-dev.h> 36 #include <media/v4l2-device.h> 37 #include <media/v4l2-ctrls.h> 38 #include <media/videobuf2-v4l2.h> 39 40 #include "solo6x10-regs.h" 41 42 #ifndef PCI_VENDOR_ID_SOFTLOGIC 43 #define PCI_VENDOR_ID_SOFTLOGIC 0x9413 44 #define PCI_DEVICE_ID_SOLO6010 0x6010 45 #define PCI_DEVICE_ID_SOLO6110 0x6110 46 #endif 47 48 #ifndef PCI_VENDOR_ID_BLUECHERRY 49 #define PCI_VENDOR_ID_BLUECHERRY 0x1BB3 50 /* Neugent Softlogic 6010 based cards */ 51 #define PCI_DEVICE_ID_NEUSOLO_4 0x4304 52 #define PCI_DEVICE_ID_NEUSOLO_9 0x4309 53 #define PCI_DEVICE_ID_NEUSOLO_16 0x4310 54 /* Bluecherry Softlogic 6010 based cards */ 55 #define PCI_DEVICE_ID_BC_SOLO_4 0x4E04 56 #define PCI_DEVICE_ID_BC_SOLO_9 0x4E09 57 #define PCI_DEVICE_ID_BC_SOLO_16 0x4E10 58 /* Bluecherry Softlogic 6110 based cards */ 59 #define PCI_DEVICE_ID_BC_6110_4 0x5304 60 #define PCI_DEVICE_ID_BC_6110_8 0x5308 61 #define PCI_DEVICE_ID_BC_6110_16 0x5310 62 #endif /* Bluecherry */ 63 64 /* Used in pci_device_id, and solo_dev->type */ 65 #define SOLO_DEV_6010 0 66 #define SOLO_DEV_6110 1 67 68 #define SOLO6X10_NAME "solo6x10" 69 70 #define SOLO_MAX_CHANNELS 16 71 72 #define SOLO6X10_VERSION "3.0.0" 73 74 /* 75 * The SOLO6x10 actually has 8 i2c channels, but we only use 2. 76 * 0 - Techwell chip(s) 77 * 1 - SAA7128 78 */ 79 #define SOLO_I2C_ADAPTERS 2 80 #define SOLO_I2C_TW 0 81 #define SOLO_I2C_SAA 1 82 83 /* DMA Engine setup */ 84 #define SOLO_NR_P2M 4 85 #define SOLO_NR_P2M_DESC 256 86 #define SOLO_P2M_DESC_SIZE (SOLO_NR_P2M_DESC * 16) 87 88 /* Encoder standard modes */ 89 #define SOLO_ENC_MODE_CIF 2 90 #define SOLO_ENC_MODE_HD1 1 91 #define SOLO_ENC_MODE_D1 9 92 93 #define SOLO_DEFAULT_QP 3 94 95 #define SOLO_CID_CUSTOM_BASE (V4L2_CID_USER_BASE | 0xf000) 96 #define V4L2_CID_MOTION_TRACE (SOLO_CID_CUSTOM_BASE+2) 97 #define V4L2_CID_OSD_TEXT (SOLO_CID_CUSTOM_BASE+3) 98 99 /* 100 * Motion thresholds are in a table of 64x64 samples, with 101 * each sample representing 16x16 pixels of the source. In 102 * effect, 44x30 samples are used for NTSC, and 44x36 for PAL. 103 * The 5th sample on the 10th row is (10*64)+5 = 645. 104 * 105 * Internally it is stored as a 45x45 array (45*16 = 720, which is the 106 * maximum PAL/NTSC width). 107 */ 108 #define SOLO_MOTION_SZ (45) 109 110 enum SOLO_I2C_STATE { 111 IIC_STATE_IDLE, 112 IIC_STATE_START, 113 IIC_STATE_READ, 114 IIC_STATE_WRITE, 115 IIC_STATE_STOP 116 }; 117 118 /* Defined in Table 4-16, Page 68-69 of the 6010 Datasheet */ 119 struct solo_p2m_desc { 120 u32 ctrl; 121 u32 cfg; 122 u32 dma_addr; 123 u32 ext_addr; 124 }; 125 126 struct solo_p2m_dev { 127 struct mutex mutex; 128 struct completion completion; 129 int desc_count; 130 int desc_idx; 131 struct solo_p2m_desc *descs; 132 int error; 133 }; 134 135 #define OSD_TEXT_MAX 44 136 137 struct solo_vb2_buf { 138 struct vb2_v4l2_buffer vb; 139 struct list_head list; 140 }; 141 142 enum solo_enc_types { 143 SOLO_ENC_TYPE_STD, 144 SOLO_ENC_TYPE_EXT, 145 }; 146 147 struct solo_enc_dev { 148 struct solo_dev *solo_dev; 149 /* V4L2 Items */ 150 struct v4l2_ctrl_handler hdl; 151 struct v4l2_ctrl *md_thresholds; 152 struct video_device *vfd; 153 /* General accounting */ 154 struct mutex lock; 155 spinlock_t motion_lock; 156 u8 ch; 157 u8 mode, gop, qp, interlaced, interval; 158 u8 bw_weight; 159 u16 motion_thresh; 160 bool motion_global; 161 bool motion_enabled; 162 u16 width; 163 u16 height; 164 165 /* OSD buffers */ 166 char osd_text[OSD_TEXT_MAX + 1]; 167 u8 osd_buf[SOLO_EOSD_EXT_SIZE_MAX] 168 __aligned(4); 169 170 /* VOP stuff */ 171 u8 vop[64]; 172 int vop_len; 173 u8 jpeg_header[1024]; 174 int jpeg_len; 175 176 u32 fmt; 177 enum solo_enc_types type; 178 u32 sequence; 179 struct vb2_queue vidq; 180 struct list_head vidq_active; 181 int desc_count; 182 int desc_nelts; 183 struct solo_p2m_desc *desc_items; 184 dma_addr_t desc_dma; 185 spinlock_t av_lock; 186 }; 187 188 /* The SOLO6x10 PCI Device */ 189 struct solo_dev { 190 /* General stuff */ 191 struct pci_dev *pdev; 192 int type; 193 unsigned int time_sync; 194 unsigned int usec_lsb; 195 unsigned int clock_mhz; 196 u8 __iomem *reg_base; 197 int nr_chans; 198 int nr_ext; 199 u32 irq_mask; 200 u32 motion_mask; 201 struct v4l2_device v4l2_dev; 202 203 /* tw28xx accounting */ 204 u8 tw2865, tw2864, tw2815; 205 u8 tw28_cnt; 206 207 /* i2c related items */ 208 struct i2c_adapter i2c_adap[SOLO_I2C_ADAPTERS]; 209 enum SOLO_I2C_STATE i2c_state; 210 struct mutex i2c_mutex; 211 int i2c_id; 212 wait_queue_head_t i2c_wait; 213 struct i2c_msg *i2c_msg; 214 unsigned int i2c_msg_num; 215 unsigned int i2c_msg_ptr; 216 217 /* P2M DMA Engine */ 218 struct solo_p2m_dev p2m_dev[SOLO_NR_P2M]; 219 atomic_t p2m_count; 220 int p2m_jiffies; 221 unsigned int p2m_timeouts; 222 223 /* V4L2 Display items */ 224 struct video_device *vfd; 225 unsigned int erasing; 226 unsigned int frame_blank; 227 u8 cur_disp_ch; 228 wait_queue_head_t disp_thread_wait; 229 struct v4l2_ctrl_handler disp_hdl; 230 231 /* V4L2 Encoder items */ 232 struct solo_enc_dev *v4l2_enc[SOLO_MAX_CHANNELS]; 233 u16 enc_bw_remain; 234 /* IDX into hw mp4 encoder */ 235 u8 enc_idx; 236 237 /* Current video settings */ 238 u32 video_type; 239 u16 video_hsize, video_vsize; 240 u16 vout_hstart, vout_vstart; 241 u16 vin_hstart, vin_vstart; 242 u8 fps; 243 244 /* JPEG Qp setting */ 245 spinlock_t jpeg_qp_lock; 246 u32 jpeg_qp[2]; 247 248 /* Audio components */ 249 struct snd_card *snd_card; 250 struct snd_pcm *snd_pcm; 251 atomic_t snd_users; 252 int g723_hw_idx; 253 254 /* sysfs stuffs */ 255 struct device dev; 256 int sdram_size; 257 struct bin_attribute sdram_attr; 258 unsigned int sys_config; 259 260 /* Ring thread */ 261 struct task_struct *ring_thread; 262 wait_queue_head_t ring_thread_wait; 263 264 /* VOP_HEADER handling */ 265 void *vh_buf; 266 dma_addr_t vh_dma; 267 int vh_size; 268 269 /* Buffer handling */ 270 struct vb2_queue vidq; 271 u32 sequence; 272 struct task_struct *kthread; 273 struct mutex lock; 274 spinlock_t slock; 275 int old_write; 276 struct list_head vidq_active; 277 }; 278 279 static inline u32 solo_reg_read(struct solo_dev *solo_dev, int reg) 280 { 281 return readl(solo_dev->reg_base + reg); 282 } 283 284 static inline void solo_reg_write(struct solo_dev *solo_dev, int reg, 285 u32 data) 286 { 287 writel(data, solo_dev->reg_base + reg); 288 } 289 290 static inline void solo_irq_on(struct solo_dev *dev, u32 mask) 291 { 292 dev->irq_mask |= mask; 293 solo_reg_write(dev, SOLO_IRQ_MASK, dev->irq_mask); 294 } 295 296 static inline void solo_irq_off(struct solo_dev *dev, u32 mask) 297 { 298 dev->irq_mask &= ~mask; 299 solo_reg_write(dev, SOLO_IRQ_MASK, dev->irq_mask); 300 } 301 302 /* Init/exit routines for subsystems */ 303 int solo_disp_init(struct solo_dev *solo_dev); 304 void solo_disp_exit(struct solo_dev *solo_dev); 305 306 int solo_gpio_init(struct solo_dev *solo_dev); 307 void solo_gpio_exit(struct solo_dev *solo_dev); 308 309 int solo_i2c_init(struct solo_dev *solo_dev); 310 void solo_i2c_exit(struct solo_dev *solo_dev); 311 312 int solo_p2m_init(struct solo_dev *solo_dev); 313 void solo_p2m_exit(struct solo_dev *solo_dev); 314 315 int solo_v4l2_init(struct solo_dev *solo_dev, unsigned nr); 316 void solo_v4l2_exit(struct solo_dev *solo_dev); 317 318 int solo_enc_init(struct solo_dev *solo_dev); 319 void solo_enc_exit(struct solo_dev *solo_dev); 320 321 int solo_enc_v4l2_init(struct solo_dev *solo_dev, unsigned nr); 322 void solo_enc_v4l2_exit(struct solo_dev *solo_dev); 323 324 int solo_g723_init(struct solo_dev *solo_dev); 325 void solo_g723_exit(struct solo_dev *solo_dev); 326 327 /* ISR's */ 328 int solo_i2c_isr(struct solo_dev *solo_dev); 329 void solo_p2m_isr(struct solo_dev *solo_dev, int id); 330 void solo_p2m_error_isr(struct solo_dev *solo_dev); 331 void solo_enc_v4l2_isr(struct solo_dev *solo_dev); 332 void solo_g723_isr(struct solo_dev *solo_dev); 333 void solo_motion_isr(struct solo_dev *solo_dev); 334 void solo_video_in_isr(struct solo_dev *solo_dev); 335 336 /* i2c read/write */ 337 u8 solo_i2c_readbyte(struct solo_dev *solo_dev, int id, u8 addr, u8 off); 338 void solo_i2c_writebyte(struct solo_dev *solo_dev, int id, u8 addr, u8 off, 339 u8 data); 340 341 /* P2M DMA */ 342 int solo_p2m_dma_t(struct solo_dev *solo_dev, int wr, 343 dma_addr_t dma_addr, u32 ext_addr, u32 size, 344 int repeat, u32 ext_size); 345 int solo_p2m_dma(struct solo_dev *solo_dev, int wr, 346 void *sys_addr, u32 ext_addr, u32 size, 347 int repeat, u32 ext_size); 348 void solo_p2m_fill_desc(struct solo_p2m_desc *desc, int wr, 349 dma_addr_t dma_addr, u32 ext_addr, u32 size, 350 int repeat, u32 ext_size); 351 int solo_p2m_dma_desc(struct solo_dev *solo_dev, 352 struct solo_p2m_desc *desc, dma_addr_t desc_dma, 353 int desc_cnt); 354 355 /* Global s_std ioctl */ 356 int solo_set_video_type(struct solo_dev *solo_dev, bool is_50hz); 357 void solo_update_mode(struct solo_enc_dev *solo_enc); 358 359 /* Set the threshold for motion detection */ 360 int solo_set_motion_threshold(struct solo_dev *solo_dev, u8 ch, u16 val); 361 int solo_set_motion_block(struct solo_dev *solo_dev, u8 ch, 362 const u16 *thresholds); 363 #define SOLO_DEF_MOT_THRESH 0x0300 364 365 /* Write text on OSD */ 366 int solo_osd_print(struct solo_enc_dev *solo_enc); 367 368 /* EEPROM commands */ 369 unsigned int solo_eeprom_ewen(struct solo_dev *solo_dev, int w_en); 370 __be16 solo_eeprom_read(struct solo_dev *solo_dev, int loc); 371 int solo_eeprom_write(struct solo_dev *solo_dev, int loc, 372 __be16 data); 373 374 /* JPEG Qp functions */ 375 void solo_s_jpeg_qp(struct solo_dev *solo_dev, unsigned int ch, 376 unsigned int qp); 377 int solo_g_jpeg_qp(struct solo_dev *solo_dev, unsigned int ch); 378 379 #define CHK_FLAGS(v, flags) (((v) & (flags)) == (flags)) 380 381 #endif /* __SOLO6X10_H */ 382