1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 * Driver for the NXP SAA7164 PCIe bridge 4 * 5 * Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com> 6 */ 7 8 #include "saa7164.h" 9 10 /* Take the encoder configuration from the port struct and 11 * flush it to the hardware. 12 */ 13 static void saa7164_vbi_configure(struct saa7164_port *port) 14 { 15 struct saa7164_dev *dev = port->dev; 16 dprintk(DBGLVL_VBI, "%s()\n", __func__); 17 18 port->vbi_params.width = port->enc_port->width; 19 port->vbi_params.height = port->enc_port->height; 20 port->vbi_params.is_50hz = 21 (port->enc_port->encodernorm.id & V4L2_STD_625_50) != 0; 22 23 /* Set up the DIF (enable it) for analog mode by default */ 24 saa7164_api_initialize_dif(port); 25 dprintk(DBGLVL_VBI, "%s() ends\n", __func__); 26 } 27 28 static int saa7164_vbi_buffers_dealloc(struct saa7164_port *port) 29 { 30 struct list_head *c, *n, *p, *q, *l, *v; 31 struct saa7164_dev *dev = port->dev; 32 struct saa7164_buffer *buf; 33 struct saa7164_user_buffer *ubuf; 34 35 /* Remove any allocated buffers */ 36 mutex_lock(&port->dmaqueue_lock); 37 38 dprintk(DBGLVL_VBI, "%s(port=%d) dmaqueue\n", __func__, port->nr); 39 list_for_each_safe(c, n, &port->dmaqueue.list) { 40 buf = list_entry(c, struct saa7164_buffer, list); 41 list_del(c); 42 saa7164_buffer_dealloc(buf); 43 } 44 45 dprintk(DBGLVL_VBI, "%s(port=%d) used\n", __func__, port->nr); 46 list_for_each_safe(p, q, &port->list_buf_used.list) { 47 ubuf = list_entry(p, struct saa7164_user_buffer, list); 48 list_del(p); 49 saa7164_buffer_dealloc_user(ubuf); 50 } 51 52 dprintk(DBGLVL_VBI, "%s(port=%d) free\n", __func__, port->nr); 53 list_for_each_safe(l, v, &port->list_buf_free.list) { 54 ubuf = list_entry(l, struct saa7164_user_buffer, list); 55 list_del(l); 56 saa7164_buffer_dealloc_user(ubuf); 57 } 58 59 mutex_unlock(&port->dmaqueue_lock); 60 dprintk(DBGLVL_VBI, "%s(port=%d) done\n", __func__, port->nr); 61 62 return 0; 63 } 64 65 /* Dynamic buffer switch at vbi start time */ 66 static int saa7164_vbi_buffers_alloc(struct saa7164_port *port) 67 { 68 struct saa7164_dev *dev = port->dev; 69 struct saa7164_buffer *buf; 70 struct saa7164_user_buffer *ubuf; 71 struct tmHWStreamParameters *params = &port->hw_streamingparams; 72 int result = -ENODEV, i; 73 int len = 0; 74 75 dprintk(DBGLVL_VBI, "%s()\n", __func__); 76 77 /* TODO: NTSC SPECIFIC */ 78 /* Init and establish defaults */ 79 params->samplesperline = 1440; 80 params->numberoflines = 12; 81 params->numberoflines = 18; 82 params->pitch = 1600; 83 params->pitch = 1440; 84 params->numpagetables = 2 + 85 ((params->numberoflines * params->pitch) / PAGE_SIZE); 86 params->bitspersample = 8; 87 params->linethreshold = 0; 88 params->pagetablelistvirt = NULL; 89 params->pagetablelistphys = NULL; 90 params->numpagetableentries = port->hwcfg.buffercount; 91 92 /* Allocate the PCI resources, buffers (hard) */ 93 for (i = 0; i < port->hwcfg.buffercount; i++) { 94 buf = saa7164_buffer_alloc(port, 95 params->numberoflines * 96 params->pitch); 97 98 if (!buf) { 99 printk(KERN_ERR "%s() failed (errno = %d), unable to allocate buffer\n", 100 __func__, result); 101 result = -ENOMEM; 102 goto failed; 103 } else { 104 105 mutex_lock(&port->dmaqueue_lock); 106 list_add_tail(&buf->list, &port->dmaqueue.list); 107 mutex_unlock(&port->dmaqueue_lock); 108 109 } 110 } 111 112 /* Allocate some kernel buffers for copying 113 * to userpsace. 114 */ 115 len = params->numberoflines * params->pitch; 116 117 if (vbi_buffers < 16) 118 vbi_buffers = 16; 119 if (vbi_buffers > 512) 120 vbi_buffers = 512; 121 122 for (i = 0; i < vbi_buffers; i++) { 123 124 ubuf = saa7164_buffer_alloc_user(dev, len); 125 if (ubuf) { 126 mutex_lock(&port->dmaqueue_lock); 127 list_add_tail(&ubuf->list, &port->list_buf_free.list); 128 mutex_unlock(&port->dmaqueue_lock); 129 } 130 131 } 132 133 result = 0; 134 135 failed: 136 return result; 137 } 138 139 140 static int saa7164_vbi_initialize(struct saa7164_port *port) 141 { 142 saa7164_vbi_configure(port); 143 return 0; 144 } 145 146 /* -- V4L2 --------------------------------------------------------- */ 147 static int vidioc_s_std(struct file *file, void *priv, v4l2_std_id id) 148 { 149 struct saa7164_vbi_fh *fh = file->private_data; 150 151 return saa7164_s_std(fh->port->enc_port, id); 152 } 153 154 static int vidioc_g_std(struct file *file, void *priv, v4l2_std_id *id) 155 { 156 struct saa7164_encoder_fh *fh = file->private_data; 157 158 return saa7164_g_std(fh->port->enc_port, id); 159 } 160 161 static int vidioc_g_input(struct file *file, void *priv, unsigned int *i) 162 { 163 struct saa7164_vbi_fh *fh = file->private_data; 164 165 return saa7164_g_input(fh->port->enc_port, i); 166 } 167 168 static int vidioc_s_input(struct file *file, void *priv, unsigned int i) 169 { 170 struct saa7164_vbi_fh *fh = file->private_data; 171 172 return saa7164_s_input(fh->port->enc_port, i); 173 } 174 175 static int vidioc_g_frequency(struct file *file, void *priv, 176 struct v4l2_frequency *f) 177 { 178 struct saa7164_vbi_fh *fh = file->private_data; 179 180 return saa7164_g_frequency(fh->port->enc_port, f); 181 } 182 183 static int vidioc_s_frequency(struct file *file, void *priv, 184 const struct v4l2_frequency *f) 185 { 186 struct saa7164_vbi_fh *fh = file->private_data; 187 int ret = saa7164_s_frequency(fh->port->enc_port, f); 188 189 if (ret == 0) 190 saa7164_vbi_initialize(fh->port); 191 return ret; 192 } 193 194 static int vidioc_querycap(struct file *file, void *priv, 195 struct v4l2_capability *cap) 196 { 197 struct saa7164_vbi_fh *fh = file->private_data; 198 struct saa7164_port *port = fh->port; 199 struct saa7164_dev *dev = port->dev; 200 201 strscpy(cap->driver, dev->name, sizeof(cap->driver)); 202 strscpy(cap->card, saa7164_boards[dev->board].name, 203 sizeof(cap->card)); 204 sprintf(cap->bus_info, "PCI:%s", pci_name(dev->pci)); 205 cap->capabilities = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_READWRITE | 206 V4L2_CAP_TUNER | V4L2_CAP_VBI_CAPTURE | 207 V4L2_CAP_DEVICE_CAPS; 208 return 0; 209 } 210 211 static int saa7164_vbi_stop_port(struct saa7164_port *port) 212 { 213 struct saa7164_dev *dev = port->dev; 214 int ret; 215 216 ret = saa7164_api_transition_port(port, SAA_DMASTATE_STOP); 217 if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { 218 printk(KERN_ERR "%s() stop transition failed, ret = 0x%x\n", 219 __func__, ret); 220 ret = -EIO; 221 } else { 222 dprintk(DBGLVL_VBI, "%s() Stopped\n", __func__); 223 ret = 0; 224 } 225 226 return ret; 227 } 228 229 static int saa7164_vbi_acquire_port(struct saa7164_port *port) 230 { 231 struct saa7164_dev *dev = port->dev; 232 int ret; 233 234 ret = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE); 235 if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { 236 printk(KERN_ERR "%s() acquire transition failed, ret = 0x%x\n", 237 __func__, ret); 238 ret = -EIO; 239 } else { 240 dprintk(DBGLVL_VBI, "%s() Acquired\n", __func__); 241 ret = 0; 242 } 243 244 return ret; 245 } 246 247 static int saa7164_vbi_pause_port(struct saa7164_port *port) 248 { 249 struct saa7164_dev *dev = port->dev; 250 int ret; 251 252 ret = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE); 253 if ((ret != SAA_OK) && (ret != SAA_ERR_ALREADY_STOPPED)) { 254 printk(KERN_ERR "%s() pause transition failed, ret = 0x%x\n", 255 __func__, ret); 256 ret = -EIO; 257 } else { 258 dprintk(DBGLVL_VBI, "%s() Paused\n", __func__); 259 ret = 0; 260 } 261 262 return ret; 263 } 264 265 /* Firmware is very windows centric, meaning you have to transition 266 * the part through AVStream / KS Windows stages, forwards or backwards. 267 * States are: stopped, acquired (h/w), paused, started. 268 * We have to leave here will all of the soft buffers on the free list, 269 * else the cfg_post() func won't have soft buffers to correctly configure. 270 */ 271 static int saa7164_vbi_stop_streaming(struct saa7164_port *port) 272 { 273 struct saa7164_dev *dev = port->dev; 274 struct saa7164_buffer *buf; 275 struct saa7164_user_buffer *ubuf; 276 struct list_head *c, *n; 277 int ret; 278 279 dprintk(DBGLVL_VBI, "%s(port=%d)\n", __func__, port->nr); 280 281 ret = saa7164_vbi_pause_port(port); 282 ret = saa7164_vbi_acquire_port(port); 283 ret = saa7164_vbi_stop_port(port); 284 285 dprintk(DBGLVL_VBI, "%s(port=%d) Hardware stopped\n", __func__, 286 port->nr); 287 288 /* Reset the state of any allocated buffer resources */ 289 mutex_lock(&port->dmaqueue_lock); 290 291 /* Reset the hard and soft buffer state */ 292 list_for_each_safe(c, n, &port->dmaqueue.list) { 293 buf = list_entry(c, struct saa7164_buffer, list); 294 buf->flags = SAA7164_BUFFER_FREE; 295 buf->pos = 0; 296 } 297 298 list_for_each_safe(c, n, &port->list_buf_used.list) { 299 ubuf = list_entry(c, struct saa7164_user_buffer, list); 300 ubuf->pos = 0; 301 list_move_tail(&ubuf->list, &port->list_buf_free.list); 302 } 303 304 mutex_unlock(&port->dmaqueue_lock); 305 306 /* Free any allocated resources */ 307 saa7164_vbi_buffers_dealloc(port); 308 309 dprintk(DBGLVL_VBI, "%s(port=%d) Released\n", __func__, port->nr); 310 311 return ret; 312 } 313 314 static int saa7164_vbi_start_streaming(struct saa7164_port *port) 315 { 316 struct saa7164_dev *dev = port->dev; 317 int result, ret = 0; 318 319 dprintk(DBGLVL_VBI, "%s(port=%d)\n", __func__, port->nr); 320 321 port->done_first_interrupt = 0; 322 323 /* allocate all of the PCIe DMA buffer resources on the fly, 324 * allowing switching between TS and PS payloads without 325 * requiring a complete driver reload. 326 */ 327 saa7164_vbi_buffers_alloc(port); 328 329 /* Configure the encoder with any cache values */ 330 #if 0 331 saa7164_api_set_encoder(port); 332 saa7164_api_get_encoder(port); 333 #endif 334 335 /* Place the empty buffers on the hardware */ 336 saa7164_buffer_cfg_port(port); 337 338 /* Negotiate format */ 339 if (saa7164_api_set_vbi_format(port) != SAA_OK) { 340 printk(KERN_ERR "%s() No supported VBI format\n", __func__); 341 ret = -EIO; 342 goto out; 343 } 344 345 /* Acquire the hardware */ 346 result = saa7164_api_transition_port(port, SAA_DMASTATE_ACQUIRE); 347 if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { 348 printk(KERN_ERR "%s() acquire transition failed, res = 0x%x\n", 349 __func__, result); 350 351 ret = -EIO; 352 goto out; 353 } else 354 dprintk(DBGLVL_VBI, "%s() Acquired\n", __func__); 355 356 /* Pause the hardware */ 357 result = saa7164_api_transition_port(port, SAA_DMASTATE_PAUSE); 358 if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { 359 printk(KERN_ERR "%s() pause transition failed, res = 0x%x\n", 360 __func__, result); 361 362 /* Stop the hardware, regardless */ 363 result = saa7164_vbi_stop_port(port); 364 if (result != SAA_OK) { 365 printk(KERN_ERR "%s() pause/forced stop transition failed, res = 0x%x\n", 366 __func__, result); 367 } 368 369 ret = -EIO; 370 goto out; 371 } else 372 dprintk(DBGLVL_VBI, "%s() Paused\n", __func__); 373 374 /* Start the hardware */ 375 result = saa7164_api_transition_port(port, SAA_DMASTATE_RUN); 376 if ((result != SAA_OK) && (result != SAA_ERR_ALREADY_STOPPED)) { 377 printk(KERN_ERR "%s() run transition failed, result = 0x%x\n", 378 __func__, result); 379 380 /* Stop the hardware, regardless */ 381 result = saa7164_vbi_acquire_port(port); 382 result = saa7164_vbi_stop_port(port); 383 if (result != SAA_OK) { 384 printk(KERN_ERR "%s() run/forced stop transition failed, res = 0x%x\n", 385 __func__, result); 386 } 387 388 ret = -EIO; 389 } else 390 dprintk(DBGLVL_VBI, "%s() Running\n", __func__); 391 392 out: 393 return ret; 394 } 395 396 static int saa7164_vbi_fmt(struct file *file, void *priv, 397 struct v4l2_format *f) 398 { 399 /* ntsc */ 400 f->fmt.vbi.samples_per_line = 1440; 401 f->fmt.vbi.sampling_rate = 27000000; 402 f->fmt.vbi.sample_format = V4L2_PIX_FMT_GREY; 403 f->fmt.vbi.offset = 0; 404 f->fmt.vbi.flags = 0; 405 f->fmt.vbi.start[0] = 10; 406 f->fmt.vbi.count[0] = 18; 407 f->fmt.vbi.start[1] = 263 + 10 + 1; 408 f->fmt.vbi.count[1] = 18; 409 memset(f->fmt.vbi.reserved, 0, sizeof(f->fmt.vbi.reserved)); 410 return 0; 411 } 412 413 static int fops_open(struct file *file) 414 { 415 struct saa7164_dev *dev; 416 struct saa7164_port *port; 417 struct saa7164_vbi_fh *fh; 418 419 port = (struct saa7164_port *)video_get_drvdata(video_devdata(file)); 420 if (!port) 421 return -ENODEV; 422 423 dev = port->dev; 424 425 dprintk(DBGLVL_VBI, "%s()\n", __func__); 426 427 /* allocate + initialize per filehandle data */ 428 fh = kzalloc(sizeof(*fh), GFP_KERNEL); 429 if (NULL == fh) 430 return -ENOMEM; 431 432 fh->port = port; 433 v4l2_fh_init(&fh->fh, video_devdata(file)); 434 v4l2_fh_add(&fh->fh); 435 file->private_data = fh; 436 437 return 0; 438 } 439 440 static int fops_release(struct file *file) 441 { 442 struct saa7164_vbi_fh *fh = file->private_data; 443 struct saa7164_port *port = fh->port; 444 struct saa7164_dev *dev = port->dev; 445 446 dprintk(DBGLVL_VBI, "%s()\n", __func__); 447 448 /* Shut device down on last close */ 449 if (atomic_cmpxchg(&fh->v4l_reading, 1, 0) == 1) { 450 if (atomic_dec_return(&port->v4l_reader_count) == 0) { 451 /* stop vbi capture then cancel buffers */ 452 saa7164_vbi_stop_streaming(port); 453 } 454 } 455 456 v4l2_fh_del(&fh->fh); 457 v4l2_fh_exit(&fh->fh); 458 kfree(fh); 459 460 return 0; 461 } 462 463 static struct 464 saa7164_user_buffer *saa7164_vbi_next_buf(struct saa7164_port *port) 465 { 466 struct saa7164_user_buffer *ubuf = NULL; 467 struct saa7164_dev *dev = port->dev; 468 u32 crc; 469 470 mutex_lock(&port->dmaqueue_lock); 471 if (!list_empty(&port->list_buf_used.list)) { 472 ubuf = list_first_entry(&port->list_buf_used.list, 473 struct saa7164_user_buffer, list); 474 475 if (crc_checking) { 476 crc = crc32(0, ubuf->data, ubuf->actual_size); 477 if (crc != ubuf->crc) { 478 printk(KERN_ERR "%s() ubuf %p crc became invalid, was 0x%x became 0x%x\n", 479 __func__, 480 ubuf, ubuf->crc, crc); 481 } 482 } 483 484 } 485 mutex_unlock(&port->dmaqueue_lock); 486 487 dprintk(DBGLVL_VBI, "%s() returns %p\n", __func__, ubuf); 488 489 return ubuf; 490 } 491 492 static ssize_t fops_read(struct file *file, char __user *buffer, 493 size_t count, loff_t *pos) 494 { 495 struct saa7164_vbi_fh *fh = file->private_data; 496 struct saa7164_port *port = fh->port; 497 struct saa7164_user_buffer *ubuf = NULL; 498 struct saa7164_dev *dev = port->dev; 499 int ret = 0; 500 int rem, cnt; 501 u8 *p; 502 503 port->last_read_msecs_diff = port->last_read_msecs; 504 port->last_read_msecs = jiffies_to_msecs(jiffies); 505 port->last_read_msecs_diff = port->last_read_msecs - 506 port->last_read_msecs_diff; 507 508 saa7164_histogram_update(&port->read_interval, 509 port->last_read_msecs_diff); 510 511 if (*pos) { 512 printk(KERN_ERR "%s() ESPIPE\n", __func__); 513 return -ESPIPE; 514 } 515 516 if (atomic_cmpxchg(&fh->v4l_reading, 0, 1) == 0) { 517 if (atomic_inc_return(&port->v4l_reader_count) == 1) { 518 519 if (saa7164_vbi_initialize(port) < 0) { 520 printk(KERN_ERR "%s() EINVAL\n", __func__); 521 return -EINVAL; 522 } 523 524 saa7164_vbi_start_streaming(port); 525 msleep(200); 526 } 527 } 528 529 /* blocking wait for buffer */ 530 if ((file->f_flags & O_NONBLOCK) == 0) { 531 if (wait_event_interruptible(port->wait_read, 532 saa7164_vbi_next_buf(port))) { 533 printk(KERN_ERR "%s() ERESTARTSYS\n", __func__); 534 return -ERESTARTSYS; 535 } 536 } 537 538 /* Pull the first buffer from the used list */ 539 ubuf = saa7164_vbi_next_buf(port); 540 541 while ((count > 0) && ubuf) { 542 543 /* set remaining bytes to copy */ 544 rem = ubuf->actual_size - ubuf->pos; 545 cnt = rem > count ? count : rem; 546 547 p = ubuf->data + ubuf->pos; 548 549 dprintk(DBGLVL_VBI, 550 "%s() count=%d cnt=%d rem=%d buf=%p buf->pos=%d\n", 551 __func__, (int)count, cnt, rem, ubuf, ubuf->pos); 552 553 if (copy_to_user(buffer, p, cnt)) { 554 printk(KERN_ERR "%s() copy_to_user failed\n", __func__); 555 if (!ret) { 556 printk(KERN_ERR "%s() EFAULT\n", __func__); 557 ret = -EFAULT; 558 } 559 goto err; 560 } 561 562 ubuf->pos += cnt; 563 count -= cnt; 564 buffer += cnt; 565 ret += cnt; 566 567 if (ubuf->pos > ubuf->actual_size) 568 printk(KERN_ERR "read() pos > actual, huh?\n"); 569 570 if (ubuf->pos == ubuf->actual_size) { 571 572 /* finished with current buffer, take next buffer */ 573 574 /* Requeue the buffer on the free list */ 575 ubuf->pos = 0; 576 577 mutex_lock(&port->dmaqueue_lock); 578 list_move_tail(&ubuf->list, &port->list_buf_free.list); 579 mutex_unlock(&port->dmaqueue_lock); 580 581 /* Dequeue next */ 582 if ((file->f_flags & O_NONBLOCK) == 0) { 583 if (wait_event_interruptible(port->wait_read, 584 saa7164_vbi_next_buf(port))) { 585 break; 586 } 587 } 588 ubuf = saa7164_vbi_next_buf(port); 589 } 590 } 591 err: 592 if (!ret && !ubuf) { 593 printk(KERN_ERR "%s() EAGAIN\n", __func__); 594 ret = -EAGAIN; 595 } 596 597 return ret; 598 } 599 600 static __poll_t fops_poll(struct file *file, poll_table *wait) 601 { 602 struct saa7164_vbi_fh *fh = (struct saa7164_vbi_fh *)file->private_data; 603 struct saa7164_port *port = fh->port; 604 __poll_t mask = 0; 605 606 port->last_poll_msecs_diff = port->last_poll_msecs; 607 port->last_poll_msecs = jiffies_to_msecs(jiffies); 608 port->last_poll_msecs_diff = port->last_poll_msecs - 609 port->last_poll_msecs_diff; 610 611 saa7164_histogram_update(&port->poll_interval, 612 port->last_poll_msecs_diff); 613 614 if (!video_is_registered(port->v4l_device)) 615 return EPOLLERR; 616 617 if (atomic_cmpxchg(&fh->v4l_reading, 0, 1) == 0) { 618 if (atomic_inc_return(&port->v4l_reader_count) == 1) { 619 if (saa7164_vbi_initialize(port) < 0) 620 return EPOLLERR; 621 saa7164_vbi_start_streaming(port); 622 msleep(200); 623 } 624 } 625 626 /* blocking wait for buffer */ 627 if ((file->f_flags & O_NONBLOCK) == 0) { 628 if (wait_event_interruptible(port->wait_read, 629 saa7164_vbi_next_buf(port))) { 630 return EPOLLERR; 631 } 632 } 633 634 /* Pull the first buffer from the used list */ 635 if (!list_empty(&port->list_buf_used.list)) 636 mask |= EPOLLIN | EPOLLRDNORM; 637 638 return mask; 639 } 640 static const struct v4l2_file_operations vbi_fops = { 641 .owner = THIS_MODULE, 642 .open = fops_open, 643 .release = fops_release, 644 .read = fops_read, 645 .poll = fops_poll, 646 .unlocked_ioctl = video_ioctl2, 647 }; 648 649 static const struct v4l2_ioctl_ops vbi_ioctl_ops = { 650 .vidioc_s_std = vidioc_s_std, 651 .vidioc_g_std = vidioc_g_std, 652 .vidioc_enum_input = saa7164_enum_input, 653 .vidioc_g_input = vidioc_g_input, 654 .vidioc_s_input = vidioc_s_input, 655 .vidioc_g_tuner = saa7164_g_tuner, 656 .vidioc_s_tuner = saa7164_s_tuner, 657 .vidioc_g_frequency = vidioc_g_frequency, 658 .vidioc_s_frequency = vidioc_s_frequency, 659 .vidioc_querycap = vidioc_querycap, 660 .vidioc_g_fmt_vbi_cap = saa7164_vbi_fmt, 661 .vidioc_try_fmt_vbi_cap = saa7164_vbi_fmt, 662 .vidioc_s_fmt_vbi_cap = saa7164_vbi_fmt, 663 }; 664 665 static struct video_device saa7164_vbi_template = { 666 .name = "saa7164", 667 .fops = &vbi_fops, 668 .ioctl_ops = &vbi_ioctl_ops, 669 .minor = -1, 670 .tvnorms = SAA7164_NORMS, 671 .device_caps = V4L2_CAP_VBI_CAPTURE | V4L2_CAP_READWRITE | 672 V4L2_CAP_TUNER, 673 }; 674 675 static struct video_device *saa7164_vbi_alloc( 676 struct saa7164_port *port, 677 struct pci_dev *pci, 678 struct video_device *template, 679 char *type) 680 { 681 struct video_device *vfd; 682 struct saa7164_dev *dev = port->dev; 683 684 dprintk(DBGLVL_VBI, "%s()\n", __func__); 685 686 vfd = video_device_alloc(); 687 if (NULL == vfd) 688 return NULL; 689 690 *vfd = *template; 691 snprintf(vfd->name, sizeof(vfd->name), "%s %s (%s)", dev->name, 692 type, saa7164_boards[dev->board].name); 693 694 vfd->v4l2_dev = &dev->v4l2_dev; 695 vfd->release = video_device_release; 696 return vfd; 697 } 698 699 int saa7164_vbi_register(struct saa7164_port *port) 700 { 701 struct saa7164_dev *dev = port->dev; 702 int result = -ENODEV; 703 704 dprintk(DBGLVL_VBI, "%s()\n", __func__); 705 706 BUG_ON(port->type != SAA7164_MPEG_VBI); 707 708 /* Sanity check that the PCI configuration space is active */ 709 if (port->hwcfg.BARLocation == 0) { 710 printk(KERN_ERR "%s() failed (errno = %d), NO PCI configuration\n", 711 __func__, result); 712 result = -ENOMEM; 713 goto failed; 714 } 715 716 /* Establish VBI defaults here */ 717 718 /* Allocate and register the video device node */ 719 port->v4l_device = saa7164_vbi_alloc(port, 720 dev->pci, &saa7164_vbi_template, "vbi"); 721 722 if (!port->v4l_device) { 723 printk(KERN_INFO "%s: can't allocate vbi device\n", 724 dev->name); 725 result = -ENOMEM; 726 goto failed; 727 } 728 729 port->enc_port = &dev->ports[port->nr - 2]; 730 video_set_drvdata(port->v4l_device, port); 731 result = video_register_device(port->v4l_device, 732 VFL_TYPE_VBI, -1); 733 if (result < 0) { 734 printk(KERN_INFO "%s: can't register vbi device\n", 735 dev->name); 736 /* TODO: We're going to leak here if we don't dealloc 737 The buffers above. The unreg function can't deal wit it. 738 */ 739 goto failed; 740 } 741 742 printk(KERN_INFO "%s: registered device vbi%d [vbi]\n", 743 dev->name, port->v4l_device->num); 744 745 /* Configure the hardware defaults */ 746 747 result = 0; 748 failed: 749 return result; 750 } 751 752 void saa7164_vbi_unregister(struct saa7164_port *port) 753 { 754 struct saa7164_dev *dev = port->dev; 755 756 dprintk(DBGLVL_VBI, "%s(port=%d)\n", __func__, port->nr); 757 758 BUG_ON(port->type != SAA7164_MPEG_VBI); 759 760 if (port->v4l_device) { 761 if (port->v4l_device->minor != -1) 762 video_unregister_device(port->v4l_device); 763 else 764 video_device_release(port->v4l_device); 765 766 port->v4l_device = NULL; 767 } 768 769 } 770