1 /* 2 * Driver for the NXP SAA7164 PCIe bridge 3 * 4 * Copyright (c) 2010-2015 Steven Toth <stoth@kernellabs.com> 5 * 6 * This program is free software; you can redistribute it and/or modify 7 * it under the terms of the GNU General Public License as published by 8 * the Free Software Foundation; either version 2 of the License, or 9 * (at your option) any later version. 10 * 11 * This program is distributed in the hope that it will be useful, 12 * but WITHOUT ANY WARRANTY; without even the implied warranty of 13 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 * 15 * GNU General Public License for more details. 16 */ 17 18 #include <linux/wait.h> 19 20 #include "saa7164.h" 21 22 static int saa7164_cmd_alloc_seqno(struct saa7164_dev *dev) 23 { 24 int i, ret = -1; 25 26 mutex_lock(&dev->lock); 27 for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) { 28 if (dev->cmds[i].inuse == 0) { 29 dev->cmds[i].inuse = 1; 30 dev->cmds[i].signalled = 0; 31 dev->cmds[i].timeout = 0; 32 ret = dev->cmds[i].seqno; 33 break; 34 } 35 } 36 mutex_unlock(&dev->lock); 37 38 return ret; 39 } 40 41 static void saa7164_cmd_free_seqno(struct saa7164_dev *dev, u8 seqno) 42 { 43 mutex_lock(&dev->lock); 44 if ((dev->cmds[seqno].inuse == 1) && 45 (dev->cmds[seqno].seqno == seqno)) { 46 dev->cmds[seqno].inuse = 0; 47 dev->cmds[seqno].signalled = 0; 48 dev->cmds[seqno].timeout = 0; 49 } 50 mutex_unlock(&dev->lock); 51 } 52 53 static void saa7164_cmd_timeout_seqno(struct saa7164_dev *dev, u8 seqno) 54 { 55 mutex_lock(&dev->lock); 56 if ((dev->cmds[seqno].inuse == 1) && 57 (dev->cmds[seqno].seqno == seqno)) { 58 dev->cmds[seqno].timeout = 1; 59 } 60 mutex_unlock(&dev->lock); 61 } 62 63 static u32 saa7164_cmd_timeout_get(struct saa7164_dev *dev, u8 seqno) 64 { 65 int ret = 0; 66 67 mutex_lock(&dev->lock); 68 if ((dev->cmds[seqno].inuse == 1) && 69 (dev->cmds[seqno].seqno == seqno)) { 70 ret = dev->cmds[seqno].timeout; 71 } 72 mutex_unlock(&dev->lock); 73 74 return ret; 75 } 76 77 /* Commands to the f/w get marshelled to/from this code then onto the PCI 78 * -bus/c running buffer. */ 79 int saa7164_irq_dequeue(struct saa7164_dev *dev) 80 { 81 int ret = SAA_OK, i = 0; 82 u32 timeout; 83 wait_queue_head_t *q = NULL; 84 u8 tmp[512]; 85 dprintk(DBGLVL_CMD, "%s()\n", __func__); 86 87 /* While any outstand message on the bus exists... */ 88 do { 89 90 /* Peek the msg bus */ 91 struct tmComResInfo tRsp = { 0, 0, 0, 0, 0, 0 }; 92 ret = saa7164_bus_get(dev, &tRsp, NULL, 1); 93 if (ret != SAA_OK) 94 break; 95 96 q = &dev->cmds[tRsp.seqno].wait; 97 timeout = saa7164_cmd_timeout_get(dev, tRsp.seqno); 98 dprintk(DBGLVL_CMD, "%s() timeout = %d\n", __func__, timeout); 99 if (!timeout) { 100 dprintk(DBGLVL_CMD, 101 "%s() signalled seqno(%d) (for dequeue)\n", 102 __func__, tRsp.seqno); 103 dev->cmds[tRsp.seqno].signalled = 1; 104 wake_up(q); 105 } else { 106 printk(KERN_ERR 107 "%s() found timed out command on the bus\n", 108 __func__); 109 110 /* Clean the bus */ 111 ret = saa7164_bus_get(dev, &tRsp, &tmp, 0); 112 printk(KERN_ERR "%s() ret = %x\n", __func__, ret); 113 if (ret == SAA_ERR_EMPTY) 114 /* Someone else already fetched the response */ 115 return SAA_OK; 116 117 if (ret != SAA_OK) 118 return ret; 119 } 120 121 /* It's unlikely to have more than 4 or 5 pending messages, 122 * ensure we exit at some point regardless. 123 */ 124 } while (i++ < 32); 125 126 return ret; 127 } 128 129 /* Commands to the f/w get marshelled to/from this code then onto the PCI 130 * -bus/c running buffer. */ 131 static int saa7164_cmd_dequeue(struct saa7164_dev *dev) 132 { 133 int ret; 134 u32 timeout; 135 wait_queue_head_t *q = NULL; 136 u8 tmp[512]; 137 dprintk(DBGLVL_CMD, "%s()\n", __func__); 138 139 while (true) { 140 141 struct tmComResInfo tRsp = { 0, 0, 0, 0, 0, 0 }; 142 ret = saa7164_bus_get(dev, &tRsp, NULL, 1); 143 if (ret == SAA_ERR_EMPTY) 144 return SAA_OK; 145 146 if (ret != SAA_OK) 147 return ret; 148 149 q = &dev->cmds[tRsp.seqno].wait; 150 timeout = saa7164_cmd_timeout_get(dev, tRsp.seqno); 151 dprintk(DBGLVL_CMD, "%s() timeout = %d\n", __func__, timeout); 152 if (timeout) { 153 printk(KERN_ERR "found timed out command on the bus\n"); 154 155 /* Clean the bus */ 156 ret = saa7164_bus_get(dev, &tRsp, &tmp, 0); 157 printk(KERN_ERR "ret = %x\n", ret); 158 if (ret == SAA_ERR_EMPTY) 159 /* Someone else already fetched the response */ 160 return SAA_OK; 161 162 if (ret != SAA_OK) 163 return ret; 164 165 if (tRsp.flags & PVC_CMDFLAG_CONTINUE) 166 printk(KERN_ERR "split response\n"); 167 else 168 saa7164_cmd_free_seqno(dev, tRsp.seqno); 169 170 printk(KERN_ERR " timeout continue\n"); 171 continue; 172 } 173 174 dprintk(DBGLVL_CMD, "%s() signalled seqno(%d) (for dequeue)\n", 175 __func__, tRsp.seqno); 176 dev->cmds[tRsp.seqno].signalled = 1; 177 wake_up(q); 178 return SAA_OK; 179 } 180 } 181 182 static int saa7164_cmd_set(struct saa7164_dev *dev, struct tmComResInfo *msg, 183 void *buf) 184 { 185 struct tmComResBusInfo *bus = &dev->bus; 186 u8 cmd_sent; 187 u16 size, idx; 188 u32 cmds; 189 void *tmp; 190 int ret = -1; 191 192 if (!msg) { 193 printk(KERN_ERR "%s() !msg\n", __func__); 194 return SAA_ERR_BAD_PARAMETER; 195 } 196 197 mutex_lock(&dev->cmds[msg->id].lock); 198 199 size = msg->size; 200 idx = 0; 201 cmds = size / bus->m_wMaxReqSize; 202 if (size % bus->m_wMaxReqSize == 0) 203 cmds -= 1; 204 205 cmd_sent = 0; 206 207 /* Split the request into smaller chunks */ 208 for (idx = 0; idx < cmds; idx++) { 209 210 msg->flags |= SAA_CMDFLAG_CONTINUE; 211 msg->size = bus->m_wMaxReqSize; 212 tmp = buf + idx * bus->m_wMaxReqSize; 213 214 ret = saa7164_bus_set(dev, msg, tmp); 215 if (ret != SAA_OK) { 216 printk(KERN_ERR "%s() set failed %d\n", __func__, ret); 217 218 if (cmd_sent) { 219 ret = SAA_ERR_BUSY; 220 goto out; 221 } 222 ret = SAA_ERR_OVERFLOW; 223 goto out; 224 } 225 cmd_sent = 1; 226 } 227 228 /* If not the last command... */ 229 if (idx != 0) 230 msg->flags &= ~SAA_CMDFLAG_CONTINUE; 231 232 msg->size = size - idx * bus->m_wMaxReqSize; 233 234 ret = saa7164_bus_set(dev, msg, buf + idx * bus->m_wMaxReqSize); 235 if (ret != SAA_OK) { 236 printk(KERN_ERR "%s() set last failed %d\n", __func__, ret); 237 238 if (cmd_sent) { 239 ret = SAA_ERR_BUSY; 240 goto out; 241 } 242 ret = SAA_ERR_OVERFLOW; 243 goto out; 244 } 245 ret = SAA_OK; 246 247 out: 248 mutex_unlock(&dev->cmds[msg->id].lock); 249 return ret; 250 } 251 252 /* Wait for a signal event, without holding a mutex. Either return TIMEOUT if 253 * the event never occurred, or SAA_OK if it was signaled during the wait. 254 */ 255 static int saa7164_cmd_wait(struct saa7164_dev *dev, u8 seqno) 256 { 257 wait_queue_head_t *q = NULL; 258 int ret = SAA_BUS_TIMEOUT; 259 unsigned long stamp; 260 int r; 261 262 if (saa_debug >= 4) 263 saa7164_bus_dump(dev); 264 265 dprintk(DBGLVL_CMD, "%s(seqno=%d)\n", __func__, seqno); 266 267 mutex_lock(&dev->lock); 268 if ((dev->cmds[seqno].inuse == 1) && 269 (dev->cmds[seqno].seqno == seqno)) { 270 q = &dev->cmds[seqno].wait; 271 } 272 mutex_unlock(&dev->lock); 273 274 if (q) { 275 /* If we haven't been signalled we need to wait */ 276 if (dev->cmds[seqno].signalled == 0) { 277 stamp = jiffies; 278 dprintk(DBGLVL_CMD, 279 "%s(seqno=%d) Waiting (signalled=%d)\n", 280 __func__, seqno, dev->cmds[seqno].signalled); 281 282 /* Wait for signalled to be flagged or timeout */ 283 /* In a highly stressed system this can easily extend 284 * into multiple seconds before the deferred worker 285 * is scheduled, and we're woken up via signal. 286 * We typically are signalled in < 50ms but it can 287 * take MUCH longer. 288 */ 289 wait_event_timeout(*q, dev->cmds[seqno].signalled, 290 (HZ * waitsecs)); 291 r = time_before(jiffies, stamp + (HZ * waitsecs)); 292 if (r) 293 ret = SAA_OK; 294 else 295 saa7164_cmd_timeout_seqno(dev, seqno); 296 297 dprintk(DBGLVL_CMD, "%s(seqno=%d) Waiting res = %d (signalled=%d)\n", 298 __func__, seqno, r, 299 dev->cmds[seqno].signalled); 300 } else 301 ret = SAA_OK; 302 } else 303 printk(KERN_ERR "%s(seqno=%d) seqno is invalid\n", 304 __func__, seqno); 305 306 return ret; 307 } 308 309 void saa7164_cmd_signal(struct saa7164_dev *dev, u8 seqno) 310 { 311 int i; 312 dprintk(DBGLVL_CMD, "%s()\n", __func__); 313 314 mutex_lock(&dev->lock); 315 for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) { 316 if (dev->cmds[i].inuse == 1) { 317 dprintk(DBGLVL_CMD, 318 "seqno %d inuse, sig = %d, t/out = %d\n", 319 dev->cmds[i].seqno, 320 dev->cmds[i].signalled, 321 dev->cmds[i].timeout); 322 } 323 } 324 325 for (i = 0; i < SAA_CMD_MAX_MSG_UNITS; i++) { 326 if ((dev->cmds[i].inuse == 1) && ((i == 0) || 327 (dev->cmds[i].signalled) || (dev->cmds[i].timeout))) { 328 dprintk(DBGLVL_CMD, "%s(seqno=%d) calling wake_up\n", 329 __func__, i); 330 dev->cmds[i].signalled = 1; 331 wake_up(&dev->cmds[i].wait); 332 } 333 } 334 mutex_unlock(&dev->lock); 335 } 336 337 int saa7164_cmd_send(struct saa7164_dev *dev, u8 id, enum tmComResCmd command, 338 u16 controlselector, u16 size, void *buf) 339 { 340 struct tmComResInfo command_t, *pcommand_t; 341 struct tmComResInfo response_t, *presponse_t; 342 u8 errdata[256]; 343 u16 resp_dsize; 344 u16 data_recd; 345 u32 loop; 346 int ret; 347 int safety = 0; 348 349 dprintk(DBGLVL_CMD, "%s(unitid = %s (%d) , command = 0x%x, sel = 0x%x)\n", 350 __func__, saa7164_unitid_name(dev, id), id, 351 command, controlselector); 352 353 if ((size == 0) || (buf == NULL)) { 354 printk(KERN_ERR "%s() Invalid param\n", __func__); 355 return SAA_ERR_BAD_PARAMETER; 356 } 357 358 /* Prepare some basic command/response structures */ 359 memset(&command_t, 0, sizeof(command_t)); 360 memset(&response_t, 0, sizeof(response_t)); 361 pcommand_t = &command_t; 362 presponse_t = &response_t; 363 command_t.id = id; 364 command_t.command = command; 365 command_t.controlselector = controlselector; 366 command_t.size = size; 367 368 /* Allocate a unique sequence number */ 369 ret = saa7164_cmd_alloc_seqno(dev); 370 if (ret < 0) { 371 printk(KERN_ERR "%s() No free sequences\n", __func__); 372 ret = SAA_ERR_NO_RESOURCES; 373 goto out; 374 } 375 376 command_t.seqno = (u8)ret; 377 378 /* Send Command */ 379 resp_dsize = size; 380 pcommand_t->size = size; 381 382 dprintk(DBGLVL_CMD, "%s() pcommand_t.seqno = %d\n", 383 __func__, pcommand_t->seqno); 384 385 dprintk(DBGLVL_CMD, "%s() pcommand_t.size = %d\n", 386 __func__, pcommand_t->size); 387 388 ret = saa7164_cmd_set(dev, pcommand_t, buf); 389 if (ret != SAA_OK) { 390 printk(KERN_ERR "%s() set command failed %d\n", __func__, ret); 391 392 if (ret != SAA_ERR_BUSY) 393 saa7164_cmd_free_seqno(dev, pcommand_t->seqno); 394 else 395 /* Flag a timeout, because at least one 396 * command was sent */ 397 saa7164_cmd_timeout_seqno(dev, pcommand_t->seqno); 398 399 goto out; 400 } 401 402 /* With split responses we have to collect the msgs piece by piece */ 403 data_recd = 0; 404 loop = 1; 405 while (loop) { 406 dprintk(DBGLVL_CMD, "%s() loop\n", __func__); 407 408 ret = saa7164_cmd_wait(dev, pcommand_t->seqno); 409 dprintk(DBGLVL_CMD, "%s() loop ret = %d\n", __func__, ret); 410 411 /* if power is down and this is not a power command ... */ 412 413 if (ret == SAA_BUS_TIMEOUT) { 414 printk(KERN_ERR "Event timed out\n"); 415 saa7164_cmd_timeout_seqno(dev, pcommand_t->seqno); 416 return ret; 417 } 418 419 if (ret != SAA_OK) { 420 printk(KERN_ERR "spurious error\n"); 421 return ret; 422 } 423 424 /* Peek response */ 425 ret = saa7164_bus_get(dev, presponse_t, NULL, 1); 426 if (ret == SAA_ERR_EMPTY) { 427 dprintk(4, "%s() SAA_ERR_EMPTY\n", __func__); 428 continue; 429 } 430 if (ret != SAA_OK) { 431 printk(KERN_ERR "peek failed\n"); 432 return ret; 433 } 434 435 dprintk(DBGLVL_CMD, "%s() presponse_t->seqno = %d\n", 436 __func__, presponse_t->seqno); 437 438 dprintk(DBGLVL_CMD, "%s() presponse_t->flags = 0x%x\n", 439 __func__, presponse_t->flags); 440 441 dprintk(DBGLVL_CMD, "%s() presponse_t->size = %d\n", 442 __func__, presponse_t->size); 443 444 /* Check if the response was for our command */ 445 if (presponse_t->seqno != pcommand_t->seqno) { 446 447 dprintk(DBGLVL_CMD, 448 "wrong event: seqno = %d, expected seqno = %d, will dequeue regardless\n", 449 presponse_t->seqno, pcommand_t->seqno); 450 451 ret = saa7164_cmd_dequeue(dev); 452 if (ret != SAA_OK) { 453 printk(KERN_ERR "dequeue failed, ret = %d\n", 454 ret); 455 if (safety++ > 16) { 456 printk(KERN_ERR 457 "dequeue exceeded, safety exit\n"); 458 return SAA_ERR_BUSY; 459 } 460 } 461 462 continue; 463 } 464 465 if ((presponse_t->flags & PVC_RESPONSEFLAG_ERROR) != 0) { 466 467 memset(&errdata[0], 0, sizeof(errdata)); 468 469 ret = saa7164_bus_get(dev, presponse_t, &errdata[0], 0); 470 if (ret != SAA_OK) { 471 printk(KERN_ERR "get error(2)\n"); 472 return ret; 473 } 474 475 saa7164_cmd_free_seqno(dev, pcommand_t->seqno); 476 477 dprintk(DBGLVL_CMD, "%s() errdata %02x%02x%02x%02x\n", 478 __func__, errdata[0], errdata[1], errdata[2], 479 errdata[3]); 480 481 /* Map error codes */ 482 dprintk(DBGLVL_CMD, "%s() cmd, error code = 0x%x\n", 483 __func__, errdata[0]); 484 485 switch (errdata[0]) { 486 case PVC_ERRORCODE_INVALID_COMMAND: 487 dprintk(DBGLVL_CMD, "%s() INVALID_COMMAND\n", 488 __func__); 489 ret = SAA_ERR_INVALID_COMMAND; 490 break; 491 case PVC_ERRORCODE_INVALID_DATA: 492 dprintk(DBGLVL_CMD, "%s() INVALID_DATA\n", 493 __func__); 494 ret = SAA_ERR_BAD_PARAMETER; 495 break; 496 case PVC_ERRORCODE_TIMEOUT: 497 dprintk(DBGLVL_CMD, "%s() TIMEOUT\n", __func__); 498 ret = SAA_ERR_TIMEOUT; 499 break; 500 case PVC_ERRORCODE_NAK: 501 dprintk(DBGLVL_CMD, "%s() NAK\n", __func__); 502 ret = SAA_ERR_NULL_PACKET; 503 break; 504 case PVC_ERRORCODE_UNKNOWN: 505 case PVC_ERRORCODE_INVALID_CONTROL: 506 dprintk(DBGLVL_CMD, 507 "%s() UNKNOWN OR INVALID CONTROL\n", 508 __func__); 509 ret = SAA_ERR_NOT_SUPPORTED; 510 break; 511 default: 512 dprintk(DBGLVL_CMD, "%s() UNKNOWN\n", __func__); 513 ret = SAA_ERR_NOT_SUPPORTED; 514 } 515 516 /* See of other commands are on the bus */ 517 if (saa7164_cmd_dequeue(dev) != SAA_OK) 518 printk(KERN_ERR "dequeue(2) failed\n"); 519 520 return ret; 521 } 522 523 /* If response is invalid */ 524 if ((presponse_t->id != pcommand_t->id) || 525 (presponse_t->command != pcommand_t->command) || 526 (presponse_t->controlselector != 527 pcommand_t->controlselector) || 528 (((resp_dsize - data_recd) != presponse_t->size) && 529 !(presponse_t->flags & PVC_CMDFLAG_CONTINUE)) || 530 ((resp_dsize - data_recd) < presponse_t->size)) { 531 532 /* Invalid */ 533 dprintk(DBGLVL_CMD, "%s() Invalid\n", __func__); 534 ret = saa7164_bus_get(dev, presponse_t, NULL, 0); 535 if (ret != SAA_OK) { 536 printk(KERN_ERR "get failed\n"); 537 return ret; 538 } 539 540 /* See of other commands are on the bus */ 541 if (saa7164_cmd_dequeue(dev) != SAA_OK) 542 printk(KERN_ERR "dequeue(3) failed\n"); 543 continue; 544 } 545 546 /* OK, now we're actually getting out correct response */ 547 ret = saa7164_bus_get(dev, presponse_t, buf + data_recd, 0); 548 if (ret != SAA_OK) { 549 printk(KERN_ERR "get failed\n"); 550 return ret; 551 } 552 553 data_recd = presponse_t->size + data_recd; 554 if (resp_dsize == data_recd) { 555 dprintk(DBGLVL_CMD, "%s() Resp recd\n", __func__); 556 break; 557 } 558 559 /* See of other commands are on the bus */ 560 if (saa7164_cmd_dequeue(dev) != SAA_OK) 561 printk(KERN_ERR "dequeue(3) failed\n"); 562 563 continue; 564 565 } /* (loop) */ 566 567 /* Release the sequence number allocation */ 568 saa7164_cmd_free_seqno(dev, pcommand_t->seqno); 569 570 /* if powerdown signal all pending commands */ 571 572 dprintk(DBGLVL_CMD, "%s() Calling dequeue then exit\n", __func__); 573 574 /* See of other commands are on the bus */ 575 if (saa7164_cmd_dequeue(dev) != SAA_OK) 576 printk(KERN_ERR "dequeue(4) failed\n"); 577 578 ret = SAA_OK; 579 out: 580 return ret; 581 } 582 583