1 // SPDX-License-Identifier: GPL-2.0-or-later 2 /* 3 mxb - v4l2 driver for the Multimedia eXtension Board 4 5 Copyright (C) 1998-2006 Michael Hunold <michael@mihu.de> 6 7 Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html 8 for further details about this card. 9 10 */ 11 12 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 13 14 #define DEBUG_VARIABLE debug 15 16 #include <media/drv-intf/saa7146_vv.h> 17 #include <media/tuner.h> 18 #include <media/v4l2-common.h> 19 #include <media/i2c/saa7115.h> 20 #include <linux/module.h> 21 #include <linux/kernel.h> 22 23 #include "tea6415c.h" 24 #include "tea6420.h" 25 26 #define MXB_AUDIOS 6 27 28 #define I2C_SAA7111A 0x24 29 #define I2C_TDA9840 0x42 30 #define I2C_TEA6415C 0x43 31 #define I2C_TEA6420_1 0x4c 32 #define I2C_TEA6420_2 0x4d 33 #define I2C_TUNER 0x60 34 35 #define MXB_BOARD_CAN_DO_VBI(dev) (dev->revision != 0) 36 37 /* global variable */ 38 static int mxb_num; 39 40 /* initial frequence the tuner will be tuned to. 41 in verden (lower saxony, germany) 4148 is a 42 channel called "phoenix" */ 43 static int freq = 4148; 44 module_param(freq, int, 0644); 45 MODULE_PARM_DESC(freq, "initial frequency the tuner will be tuned to while setup"); 46 47 static int debug; 48 module_param(debug, int, 0644); 49 MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); 50 51 #define MXB_INPUTS 4 52 enum { TUNER, AUX1, AUX3, AUX3_YC }; 53 54 static struct v4l2_input mxb_inputs[MXB_INPUTS] = { 55 { TUNER, "Tuner", V4L2_INPUT_TYPE_TUNER, 0x3f, 0, 56 V4L2_STD_PAL_BG | V4L2_STD_PAL_I, 0, V4L2_IN_CAP_STD }, 57 { AUX1, "AUX1", V4L2_INPUT_TYPE_CAMERA, 0x3f, 0, 58 V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, 59 { AUX3, "AUX3 Composite", V4L2_INPUT_TYPE_CAMERA, 0x3f, 0, 60 V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, 61 { AUX3_YC, "AUX3 S-Video", V4L2_INPUT_TYPE_CAMERA, 0x3f, 0, 62 V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, 63 }; 64 65 /* this array holds the information, which port of the saa7146 each 66 input actually uses. the mxb uses port 0 for every input */ 67 static struct { 68 int hps_source; 69 int hps_sync; 70 } input_port_selection[MXB_INPUTS] = { 71 { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, 72 { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, 73 { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, 74 { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, 75 }; 76 77 /* this array holds the information of the audio source (mxb_audios), 78 which has to be switched corresponding to the video source (mxb_channels) */ 79 static int video_audio_connect[MXB_INPUTS] = 80 { 0, 1, 3, 3 }; 81 82 struct mxb_routing { 83 u32 input; 84 u32 output; 85 }; 86 87 /* these are the available audio sources, which can switched 88 to the line- and cd-output individually */ 89 static struct v4l2_audio mxb_audios[MXB_AUDIOS] = { 90 { 91 .index = 0, 92 .name = "Tuner", 93 .capability = V4L2_AUDCAP_STEREO, 94 } , { 95 .index = 1, 96 .name = "AUX1", 97 .capability = V4L2_AUDCAP_STEREO, 98 } , { 99 .index = 2, 100 .name = "AUX2", 101 .capability = V4L2_AUDCAP_STEREO, 102 } , { 103 .index = 3, 104 .name = "AUX3", 105 .capability = V4L2_AUDCAP_STEREO, 106 } , { 107 .index = 4, 108 .name = "Radio (X9)", 109 .capability = V4L2_AUDCAP_STEREO, 110 } , { 111 .index = 5, 112 .name = "CD-ROM (X10)", 113 .capability = V4L2_AUDCAP_STEREO, 114 } 115 }; 116 117 /* These are the necessary input-output-pins for bringing one audio source 118 (see above) to the CD-output. Note that gain is set to 0 in this table. */ 119 static struct mxb_routing TEA6420_cd[MXB_AUDIOS + 1][2] = { 120 { { 1, 1 }, { 1, 1 } }, /* Tuner */ 121 { { 5, 1 }, { 6, 1 } }, /* AUX 1 */ 122 { { 4, 1 }, { 6, 1 } }, /* AUX 2 */ 123 { { 3, 1 }, { 6, 1 } }, /* AUX 3 */ 124 { { 1, 1 }, { 3, 1 } }, /* Radio */ 125 { { 1, 1 }, { 2, 1 } }, /* CD-Rom */ 126 { { 6, 1 }, { 6, 1 } } /* Mute */ 127 }; 128 129 /* These are the necessary input-output-pins for bringing one audio source 130 (see above) to the line-output. Note that gain is set to 0 in this table. */ 131 static struct mxb_routing TEA6420_line[MXB_AUDIOS + 1][2] = { 132 { { 2, 3 }, { 1, 2 } }, 133 { { 5, 3 }, { 6, 2 } }, 134 { { 4, 3 }, { 6, 2 } }, 135 { { 3, 3 }, { 6, 2 } }, 136 { { 2, 3 }, { 3, 2 } }, 137 { { 2, 3 }, { 2, 2 } }, 138 { { 6, 3 }, { 6, 2 } } /* Mute */ 139 }; 140 141 struct mxb 142 { 143 struct video_device video_dev; 144 struct video_device vbi_dev; 145 146 struct i2c_adapter i2c_adapter; 147 148 struct v4l2_subdev *saa7111a; 149 struct v4l2_subdev *tda9840; 150 struct v4l2_subdev *tea6415c; 151 struct v4l2_subdev *tuner; 152 struct v4l2_subdev *tea6420_1; 153 struct v4l2_subdev *tea6420_2; 154 155 int cur_mode; /* current audio mode (mono, stereo, ...) */ 156 int cur_input; /* current input */ 157 int cur_audinput; /* current audio input */ 158 int cur_mute; /* current mute status */ 159 struct v4l2_frequency cur_freq; /* current frequency the tuner is tuned to */ 160 }; 161 162 #define saa7111a_call(mxb, o, f, args...) \ 163 v4l2_subdev_call(mxb->saa7111a, o, f, ##args) 164 #define tda9840_call(mxb, o, f, args...) \ 165 v4l2_subdev_call(mxb->tda9840, o, f, ##args) 166 #define tea6415c_call(mxb, o, f, args...) \ 167 v4l2_subdev_call(mxb->tea6415c, o, f, ##args) 168 #define tuner_call(mxb, o, f, args...) \ 169 v4l2_subdev_call(mxb->tuner, o, f, ##args) 170 #define call_all(dev, o, f, args...) \ 171 v4l2_device_call_until_err(&dev->v4l2_dev, 0, o, f, ##args) 172 173 static void mxb_update_audmode(struct mxb *mxb) 174 { 175 struct v4l2_tuner t = { 176 .audmode = mxb->cur_mode, 177 }; 178 179 tda9840_call(mxb, tuner, s_tuner, &t); 180 } 181 182 static inline void tea6420_route(struct mxb *mxb, int idx) 183 { 184 v4l2_subdev_call(mxb->tea6420_1, audio, s_routing, 185 TEA6420_cd[idx][0].input, TEA6420_cd[idx][0].output, 0); 186 v4l2_subdev_call(mxb->tea6420_2, audio, s_routing, 187 TEA6420_cd[idx][1].input, TEA6420_cd[idx][1].output, 0); 188 v4l2_subdev_call(mxb->tea6420_1, audio, s_routing, 189 TEA6420_line[idx][0].input, TEA6420_line[idx][0].output, 0); 190 v4l2_subdev_call(mxb->tea6420_2, audio, s_routing, 191 TEA6420_line[idx][1].input, TEA6420_line[idx][1].output, 0); 192 } 193 194 static struct saa7146_extension extension; 195 196 static int mxb_s_ctrl(struct v4l2_ctrl *ctrl) 197 { 198 struct saa7146_dev *dev = container_of(ctrl->handler, 199 struct saa7146_dev, ctrl_handler); 200 struct mxb *mxb = dev->ext_priv; 201 202 switch (ctrl->id) { 203 case V4L2_CID_AUDIO_MUTE: 204 mxb->cur_mute = ctrl->val; 205 /* switch the audio-source */ 206 tea6420_route(mxb, ctrl->val ? 6 : 207 video_audio_connect[mxb->cur_input]); 208 break; 209 default: 210 return -EINVAL; 211 } 212 return 0; 213 } 214 215 static const struct v4l2_ctrl_ops mxb_ctrl_ops = { 216 .s_ctrl = mxb_s_ctrl, 217 }; 218 219 static int mxb_probe(struct saa7146_dev *dev) 220 { 221 struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler; 222 struct mxb *mxb = NULL; 223 224 v4l2_ctrl_new_std(hdl, &mxb_ctrl_ops, 225 V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); 226 if (hdl->error) 227 return hdl->error; 228 mxb = kzalloc(sizeof(struct mxb), GFP_KERNEL); 229 if (mxb == NULL) { 230 DEB_D("not enough kernel memory\n"); 231 return -ENOMEM; 232 } 233 234 235 snprintf(mxb->i2c_adapter.name, sizeof(mxb->i2c_adapter.name), "mxb%d", mxb_num); 236 237 saa7146_i2c_adapter_prepare(dev, &mxb->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480); 238 if (i2c_add_adapter(&mxb->i2c_adapter) < 0) { 239 DEB_S("cannot register i2c-device. skipping.\n"); 240 kfree(mxb); 241 return -EFAULT; 242 } 243 244 mxb->saa7111a = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, 245 "saa7111", I2C_SAA7111A, NULL); 246 mxb->tea6420_1 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, 247 "tea6420", I2C_TEA6420_1, NULL); 248 mxb->tea6420_2 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, 249 "tea6420", I2C_TEA6420_2, NULL); 250 mxb->tea6415c = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, 251 "tea6415c", I2C_TEA6415C, NULL); 252 mxb->tda9840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, 253 "tda9840", I2C_TDA9840, NULL); 254 mxb->tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, 255 "tuner", I2C_TUNER, NULL); 256 257 /* check if all devices are present */ 258 if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c || 259 !mxb->tda9840 || !mxb->saa7111a || !mxb->tuner) { 260 pr_err("did not find all i2c devices. aborting\n"); 261 i2c_del_adapter(&mxb->i2c_adapter); 262 kfree(mxb); 263 return -ENODEV; 264 } 265 266 /* all devices are present, probe was successful */ 267 268 /* we store the pointer in our private data field */ 269 dev->ext_priv = mxb; 270 271 v4l2_ctrl_handler_setup(hdl); 272 273 return 0; 274 } 275 276 /* some init data for the saa7740, the so-called 'sound arena module'. 277 there are no specs available, so we simply use some init values */ 278 static struct { 279 int length; 280 char data[9]; 281 } mxb_saa7740_init[] = { 282 { 3, { 0x80, 0x00, 0x00 } },{ 3, { 0x80, 0x89, 0x00 } }, 283 { 3, { 0x80, 0xb0, 0x0a } },{ 3, { 0x00, 0x00, 0x00 } }, 284 { 3, { 0x49, 0x00, 0x00 } },{ 3, { 0x4a, 0x00, 0x00 } }, 285 { 3, { 0x4b, 0x00, 0x00 } },{ 3, { 0x4c, 0x00, 0x00 } }, 286 { 3, { 0x4d, 0x00, 0x00 } },{ 3, { 0x4e, 0x00, 0x00 } }, 287 { 3, { 0x4f, 0x00, 0x00 } },{ 3, { 0x50, 0x00, 0x00 } }, 288 { 3, { 0x51, 0x00, 0x00 } },{ 3, { 0x52, 0x00, 0x00 } }, 289 { 3, { 0x53, 0x00, 0x00 } },{ 3, { 0x54, 0x00, 0x00 } }, 290 { 3, { 0x55, 0x00, 0x00 } },{ 3, { 0x56, 0x00, 0x00 } }, 291 { 3, { 0x57, 0x00, 0x00 } },{ 3, { 0x58, 0x00, 0x00 } }, 292 { 3, { 0x59, 0x00, 0x00 } },{ 3, { 0x5a, 0x00, 0x00 } }, 293 { 3, { 0x5b, 0x00, 0x00 } },{ 3, { 0x5c, 0x00, 0x00 } }, 294 { 3, { 0x5d, 0x00, 0x00 } },{ 3, { 0x5e, 0x00, 0x00 } }, 295 { 3, { 0x5f, 0x00, 0x00 } },{ 3, { 0x60, 0x00, 0x00 } }, 296 { 3, { 0x61, 0x00, 0x00 } },{ 3, { 0x62, 0x00, 0x00 } }, 297 { 3, { 0x63, 0x00, 0x00 } },{ 3, { 0x64, 0x00, 0x00 } }, 298 { 3, { 0x65, 0x00, 0x00 } },{ 3, { 0x66, 0x00, 0x00 } }, 299 { 3, { 0x67, 0x00, 0x00 } },{ 3, { 0x68, 0x00, 0x00 } }, 300 { 3, { 0x69, 0x00, 0x00 } },{ 3, { 0x6a, 0x00, 0x00 } }, 301 { 3, { 0x6b, 0x00, 0x00 } },{ 3, { 0x6c, 0x00, 0x00 } }, 302 { 3, { 0x6d, 0x00, 0x00 } },{ 3, { 0x6e, 0x00, 0x00 } }, 303 { 3, { 0x6f, 0x00, 0x00 } },{ 3, { 0x70, 0x00, 0x00 } }, 304 { 3, { 0x71, 0x00, 0x00 } },{ 3, { 0x72, 0x00, 0x00 } }, 305 { 3, { 0x73, 0x00, 0x00 } },{ 3, { 0x74, 0x00, 0x00 } }, 306 { 3, { 0x75, 0x00, 0x00 } },{ 3, { 0x76, 0x00, 0x00 } }, 307 { 3, { 0x77, 0x00, 0x00 } },{ 3, { 0x41, 0x00, 0x42 } }, 308 { 3, { 0x42, 0x10, 0x42 } },{ 3, { 0x43, 0x20, 0x42 } }, 309 { 3, { 0x44, 0x30, 0x42 } },{ 3, { 0x45, 0x00, 0x01 } }, 310 { 3, { 0x46, 0x00, 0x01 } },{ 3, { 0x47, 0x00, 0x01 } }, 311 { 3, { 0x48, 0x00, 0x01 } }, 312 { 9, { 0x01, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } }, 313 { 9, { 0x21, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } }, 314 { 9, { 0x09, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } }, 315 { 9, { 0x29, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } }, 316 { 9, { 0x11, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } }, 317 { 9, { 0x31, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } }, 318 { 9, { 0x19, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } }, 319 { 9, { 0x39, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } }, 320 { 9, { 0x05, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } }, 321 { 9, { 0x25, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } }, 322 { 9, { 0x0d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } }, 323 { 9, { 0x2d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } }, 324 { 9, { 0x15, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } }, 325 { 9, { 0x35, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } }, 326 { 9, { 0x1d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } }, 327 { 9, { 0x3d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } }, 328 { 3, { 0x80, 0xb3, 0x0a } }, 329 {-1, { 0 } } 330 }; 331 332 /* bring hardware to a sane state. this has to be done, just in case someone 333 wants to capture from this device before it has been properly initialized. 334 the capture engine would badly fail, because no valid signal arrives on the 335 saa7146, thus leading to timeouts and stuff. */ 336 static int mxb_init_done(struct saa7146_dev* dev) 337 { 338 struct mxb* mxb = (struct mxb*)dev->ext_priv; 339 struct i2c_msg msg; 340 struct tuner_setup tun_setup; 341 v4l2_std_id std = V4L2_STD_PAL_BG; 342 343 int i, err = 0; 344 345 /* mute audio on tea6420s */ 346 tea6420_route(mxb, 6); 347 348 /* select video mode in saa7111a */ 349 saa7111a_call(mxb, video, s_std, std); 350 351 /* select tuner-output on saa7111a */ 352 saa7111a_call(mxb, video, s_routing, SAA7115_COMPOSITE0, 353 SAA7111_FMT_CCIR, 0); 354 355 /* select a tuner type */ 356 tun_setup.mode_mask = T_ANALOG_TV; 357 tun_setup.addr = ADDR_UNSET; 358 tun_setup.type = TUNER_PHILIPS_PAL; 359 tuner_call(mxb, tuner, s_type_addr, &tun_setup); 360 /* tune in some frequency on tuner */ 361 mxb->cur_freq.tuner = 0; 362 mxb->cur_freq.type = V4L2_TUNER_ANALOG_TV; 363 mxb->cur_freq.frequency = freq; 364 tuner_call(mxb, tuner, s_frequency, &mxb->cur_freq); 365 366 /* set a default video standard */ 367 /* These two gpio calls set the GPIO pins that control the tda9820 */ 368 saa7146_write(dev, GPIO_CTRL, 0x00404050); 369 saa7111a_call(mxb, core, s_gpio, 1); 370 saa7111a_call(mxb, video, s_std, std); 371 tuner_call(mxb, video, s_std, std); 372 373 /* switch to tuner-channel on tea6415c */ 374 tea6415c_call(mxb, video, s_routing, 3, 17, 0); 375 376 /* select tuner-output on multicable on tea6415c */ 377 tea6415c_call(mxb, video, s_routing, 3, 13, 0); 378 379 /* the rest for mxb */ 380 mxb->cur_input = 0; 381 mxb->cur_audinput = video_audio_connect[mxb->cur_input]; 382 mxb->cur_mute = 1; 383 384 mxb->cur_mode = V4L2_TUNER_MODE_STEREO; 385 mxb_update_audmode(mxb); 386 387 /* check if the saa7740 (aka 'sound arena module') is present 388 on the mxb. if so, we must initialize it. due to lack of 389 information about the saa7740, the values were reverse 390 engineered. */ 391 msg.addr = 0x1b; 392 msg.flags = 0; 393 msg.len = mxb_saa7740_init[0].length; 394 msg.buf = &mxb_saa7740_init[0].data[0]; 395 396 err = i2c_transfer(&mxb->i2c_adapter, &msg, 1); 397 if (err == 1) { 398 /* the sound arena module is a pos, that's probably the reason 399 philips refuses to hand out a datasheet for the saa7740... 400 it seems to screw up the i2c bus, so we disable fast irq 401 based i2c transactions here and rely on the slow and safe 402 polling method ... */ 403 extension.flags &= ~SAA7146_USE_I2C_IRQ; 404 for (i = 1; ; i++) { 405 if (-1 == mxb_saa7740_init[i].length) 406 break; 407 408 msg.len = mxb_saa7740_init[i].length; 409 msg.buf = &mxb_saa7740_init[i].data[0]; 410 err = i2c_transfer(&mxb->i2c_adapter, &msg, 1); 411 if (err != 1) { 412 DEB_D("failed to initialize 'sound arena module'\n"); 413 goto err; 414 } 415 } 416 pr_info("'sound arena module' detected\n"); 417 } 418 err: 419 /* the rest for saa7146: you should definitely set some basic values 420 for the input-port handling of the saa7146. */ 421 422 /* ext->saa has been filled by the core driver */ 423 424 /* some stuff is done via variables */ 425 saa7146_set_hps_source_and_sync(dev, input_port_selection[mxb->cur_input].hps_source, 426 input_port_selection[mxb->cur_input].hps_sync); 427 428 /* some stuff is done via direct write to the registers */ 429 430 /* this is ugly, but because of the fact that this is completely 431 hardware dependend, it should be done directly... */ 432 saa7146_write(dev, DD1_STREAM_B, 0x00000000); 433 saa7146_write(dev, DD1_INIT, 0x02000200); 434 saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); 435 436 return 0; 437 } 438 439 /* interrupt-handler. this gets called when irq_mask is != 0. 440 it must clear the interrupt-bits in irq_mask it has handled */ 441 /* 442 void mxb_irq_bh(struct saa7146_dev* dev, u32* irq_mask) 443 { 444 struct mxb* mxb = (struct mxb*)dev->ext_priv; 445 } 446 */ 447 448 static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i) 449 { 450 DEB_EE("VIDIOC_ENUMINPUT %d\n", i->index); 451 if (i->index >= MXB_INPUTS) 452 return -EINVAL; 453 memcpy(i, &mxb_inputs[i->index], sizeof(struct v4l2_input)); 454 return 0; 455 } 456 457 static int vidioc_g_input(struct file *file, void *fh, unsigned int *i) 458 { 459 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 460 struct mxb *mxb = (struct mxb *)dev->ext_priv; 461 *i = mxb->cur_input; 462 463 DEB_EE("VIDIOC_G_INPUT %d\n", *i); 464 return 0; 465 } 466 467 static int vidioc_s_input(struct file *file, void *fh, unsigned int input) 468 { 469 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 470 struct mxb *mxb = (struct mxb *)dev->ext_priv; 471 int err = 0; 472 int i = 0; 473 474 DEB_EE("VIDIOC_S_INPUT %d\n", input); 475 476 if (input >= MXB_INPUTS) 477 return -EINVAL; 478 479 mxb->cur_input = input; 480 481 saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source, 482 input_port_selection[input].hps_sync); 483 484 /* prepare switching of tea6415c and saa7111a; 485 have a look at the 'background'-file for further information */ 486 switch (input) { 487 case TUNER: 488 i = SAA7115_COMPOSITE0; 489 490 err = tea6415c_call(mxb, video, s_routing, 3, 17, 0); 491 492 /* connect tuner-output always to multicable */ 493 if (!err) 494 err = tea6415c_call(mxb, video, s_routing, 3, 13, 0); 495 break; 496 case AUX3_YC: 497 /* nothing to be done here. aux3_yc is 498 directly connected to the saa711a */ 499 i = SAA7115_SVIDEO1; 500 break; 501 case AUX3: 502 /* nothing to be done here. aux3 is 503 directly connected to the saa711a */ 504 i = SAA7115_COMPOSITE1; 505 break; 506 case AUX1: 507 i = SAA7115_COMPOSITE0; 508 err = tea6415c_call(mxb, video, s_routing, 1, 17, 0); 509 break; 510 } 511 512 if (err) 513 return err; 514 515 /* switch video in saa7111a */ 516 if (saa7111a_call(mxb, video, s_routing, i, SAA7111_FMT_CCIR, 0)) 517 pr_err("VIDIOC_S_INPUT: could not address saa7111a\n"); 518 519 mxb->cur_audinput = video_audio_connect[input]; 520 /* switch the audio-source only if necessary */ 521 if (0 == mxb->cur_mute) 522 tea6420_route(mxb, mxb->cur_audinput); 523 if (mxb->cur_audinput == 0) 524 mxb_update_audmode(mxb); 525 526 return 0; 527 } 528 529 static int vidioc_g_tuner(struct file *file, void *fh, struct v4l2_tuner *t) 530 { 531 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 532 struct mxb *mxb = (struct mxb *)dev->ext_priv; 533 534 if (t->index) { 535 DEB_D("VIDIOC_G_TUNER: channel %d does not have a tuner attached\n", 536 t->index); 537 return -EINVAL; 538 } 539 540 DEB_EE("VIDIOC_G_TUNER: %d\n", t->index); 541 542 memset(t, 0, sizeof(*t)); 543 strscpy(t->name, "TV Tuner", sizeof(t->name)); 544 t->type = V4L2_TUNER_ANALOG_TV; 545 t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO | 546 V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; 547 t->audmode = mxb->cur_mode; 548 return call_all(dev, tuner, g_tuner, t); 549 } 550 551 static int vidioc_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *t) 552 { 553 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 554 struct mxb *mxb = (struct mxb *)dev->ext_priv; 555 556 if (t->index) { 557 DEB_D("VIDIOC_S_TUNER: channel %d does not have a tuner attached\n", 558 t->index); 559 return -EINVAL; 560 } 561 562 mxb->cur_mode = t->audmode; 563 return call_all(dev, tuner, s_tuner, t); 564 } 565 566 static int vidioc_querystd(struct file *file, void *fh, v4l2_std_id *norm) 567 { 568 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 569 570 return call_all(dev, video, querystd, norm); 571 } 572 573 static int vidioc_g_frequency(struct file *file, void *fh, struct v4l2_frequency *f) 574 { 575 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 576 struct mxb *mxb = (struct mxb *)dev->ext_priv; 577 578 if (f->tuner) 579 return -EINVAL; 580 *f = mxb->cur_freq; 581 582 DEB_EE("VIDIOC_G_FREQ: freq:0x%08x\n", mxb->cur_freq.frequency); 583 return 0; 584 } 585 586 static int vidioc_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *f) 587 { 588 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 589 struct mxb *mxb = (struct mxb *)dev->ext_priv; 590 struct saa7146_vv *vv = dev->vv_data; 591 592 if (f->tuner) 593 return -EINVAL; 594 595 if (V4L2_TUNER_ANALOG_TV != f->type) 596 return -EINVAL; 597 598 DEB_EE("VIDIOC_S_FREQUENCY: freq:0x%08x\n", mxb->cur_freq.frequency); 599 600 /* tune in desired frequency */ 601 tuner_call(mxb, tuner, s_frequency, f); 602 /* let the tuner subdev clamp the frequency to the tuner range */ 603 mxb->cur_freq = *f; 604 tuner_call(mxb, tuner, g_frequency, &mxb->cur_freq); 605 if (mxb->cur_audinput == 0) 606 mxb_update_audmode(mxb); 607 608 if (mxb->cur_input) 609 return 0; 610 611 /* hack: changing the frequency should invalidate the vbi-counter (=> alevt) */ 612 spin_lock(&dev->slock); 613 vv->vbi_fieldcount = 0; 614 spin_unlock(&dev->slock); 615 616 return 0; 617 } 618 619 static int vidioc_enumaudio(struct file *file, void *fh, struct v4l2_audio *a) 620 { 621 if (a->index >= MXB_AUDIOS) 622 return -EINVAL; 623 *a = mxb_audios[a->index]; 624 return 0; 625 } 626 627 static int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *a) 628 { 629 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 630 struct mxb *mxb = (struct mxb *)dev->ext_priv; 631 632 DEB_EE("VIDIOC_G_AUDIO\n"); 633 *a = mxb_audios[mxb->cur_audinput]; 634 return 0; 635 } 636 637 static int vidioc_s_audio(struct file *file, void *fh, const struct v4l2_audio *a) 638 { 639 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 640 struct mxb *mxb = (struct mxb *)dev->ext_priv; 641 642 DEB_D("VIDIOC_S_AUDIO %d\n", a->index); 643 if (a->index >= 32 || 644 !(mxb_inputs[mxb->cur_input].audioset & (1 << a->index))) 645 return -EINVAL; 646 647 if (mxb->cur_audinput != a->index) { 648 mxb->cur_audinput = a->index; 649 tea6420_route(mxb, a->index); 650 if (mxb->cur_audinput == 0) 651 mxb_update_audmode(mxb); 652 } 653 return 0; 654 } 655 656 #ifdef CONFIG_VIDEO_ADV_DEBUG 657 static int vidioc_g_register(struct file *file, void *fh, struct v4l2_dbg_register *reg) 658 { 659 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 660 661 if (reg->reg > pci_resource_len(dev->pci, 0) - 4) 662 return -EINVAL; 663 reg->val = saa7146_read(dev, reg->reg); 664 reg->size = 4; 665 return 0; 666 } 667 668 static int vidioc_s_register(struct file *file, void *fh, const struct v4l2_dbg_register *reg) 669 { 670 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 671 672 if (reg->reg > pci_resource_len(dev->pci, 0) - 4) 673 return -EINVAL; 674 saa7146_write(dev, reg->reg, reg->val); 675 return 0; 676 } 677 #endif 678 679 static struct saa7146_ext_vv vv_data; 680 681 /* this function only gets called when the probing was successful */ 682 static int mxb_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) 683 { 684 struct mxb *mxb; 685 int ret; 686 687 DEB_EE("dev:%p\n", dev); 688 689 ret = saa7146_vv_init(dev, &vv_data); 690 if (ret) { 691 ERR("Error in saa7146_vv_init()"); 692 return ret; 693 } 694 695 if (mxb_probe(dev)) { 696 saa7146_vv_release(dev); 697 return -1; 698 } 699 mxb = (struct mxb *)dev->ext_priv; 700 701 vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input; 702 vv_data.vid_ops.vidioc_g_input = vidioc_g_input; 703 vv_data.vid_ops.vidioc_s_input = vidioc_s_input; 704 vv_data.vid_ops.vidioc_querystd = vidioc_querystd; 705 vv_data.vid_ops.vidioc_g_tuner = vidioc_g_tuner; 706 vv_data.vid_ops.vidioc_s_tuner = vidioc_s_tuner; 707 vv_data.vid_ops.vidioc_g_frequency = vidioc_g_frequency; 708 vv_data.vid_ops.vidioc_s_frequency = vidioc_s_frequency; 709 vv_data.vid_ops.vidioc_enumaudio = vidioc_enumaudio; 710 vv_data.vid_ops.vidioc_g_audio = vidioc_g_audio; 711 vv_data.vid_ops.vidioc_s_audio = vidioc_s_audio; 712 #ifdef CONFIG_VIDEO_ADV_DEBUG 713 vv_data.vid_ops.vidioc_g_register = vidioc_g_register; 714 vv_data.vid_ops.vidioc_s_register = vidioc_s_register; 715 #endif 716 if (saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_VIDEO)) { 717 ERR("cannot register capture v4l2 device. skipping.\n"); 718 saa7146_vv_release(dev); 719 return -1; 720 } 721 722 /* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/ 723 if (MXB_BOARD_CAN_DO_VBI(dev)) { 724 if (saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) { 725 ERR("cannot register vbi v4l2 device. skipping.\n"); 726 } 727 } 728 729 pr_info("found Multimedia eXtension Board #%d\n", mxb_num); 730 731 mxb_num++; 732 mxb_init_done(dev); 733 return 0; 734 } 735 736 static int mxb_detach(struct saa7146_dev *dev) 737 { 738 struct mxb *mxb = (struct mxb *)dev->ext_priv; 739 740 DEB_EE("dev:%p\n", dev); 741 742 /* mute audio on tea6420s */ 743 tea6420_route(mxb, 6); 744 745 saa7146_unregister_device(&mxb->video_dev,dev); 746 if (MXB_BOARD_CAN_DO_VBI(dev)) 747 saa7146_unregister_device(&mxb->vbi_dev, dev); 748 saa7146_vv_release(dev); 749 750 mxb_num--; 751 752 i2c_del_adapter(&mxb->i2c_adapter); 753 kfree(mxb); 754 755 return 0; 756 } 757 758 static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *standard) 759 { 760 struct mxb *mxb = (struct mxb *)dev->ext_priv; 761 762 if (V4L2_STD_PAL_I == standard->id) { 763 v4l2_std_id std = V4L2_STD_PAL_I; 764 765 DEB_D("VIDIOC_S_STD: setting mxb for PAL_I\n"); 766 /* These two gpio calls set the GPIO pins that control the tda9820 */ 767 saa7146_write(dev, GPIO_CTRL, 0x00404050); 768 saa7111a_call(mxb, core, s_gpio, 0); 769 saa7111a_call(mxb, video, s_std, std); 770 if (mxb->cur_input == 0) 771 tuner_call(mxb, video, s_std, std); 772 } else { 773 v4l2_std_id std = V4L2_STD_PAL_BG; 774 775 if (mxb->cur_input) 776 std = standard->id; 777 DEB_D("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM\n"); 778 /* These two gpio calls set the GPIO pins that control the tda9820 */ 779 saa7146_write(dev, GPIO_CTRL, 0x00404050); 780 saa7111a_call(mxb, core, s_gpio, 1); 781 saa7111a_call(mxb, video, s_std, std); 782 if (mxb->cur_input == 0) 783 tuner_call(mxb, video, s_std, std); 784 } 785 return 0; 786 } 787 788 static struct saa7146_standard standard[] = { 789 { 790 .name = "PAL-BG", .id = V4L2_STD_PAL_BG, 791 .v_offset = 0x17, .v_field = 288, 792 .h_offset = 0x14, .h_pixels = 680, 793 .v_max_out = 576, .h_max_out = 768, 794 }, { 795 .name = "PAL-I", .id = V4L2_STD_PAL_I, 796 .v_offset = 0x17, .v_field = 288, 797 .h_offset = 0x14, .h_pixels = 680, 798 .v_max_out = 576, .h_max_out = 768, 799 }, { 800 .name = "NTSC", .id = V4L2_STD_NTSC, 801 .v_offset = 0x16, .v_field = 240, 802 .h_offset = 0x06, .h_pixels = 708, 803 .v_max_out = 480, .h_max_out = 640, 804 }, { 805 .name = "SECAM", .id = V4L2_STD_SECAM, 806 .v_offset = 0x14, .v_field = 288, 807 .h_offset = 0x14, .h_pixels = 720, 808 .v_max_out = 576, .h_max_out = 768, 809 } 810 }; 811 812 static struct saa7146_pci_extension_data mxb = { 813 .ext_priv = "Multimedia eXtension Board", 814 .ext = &extension, 815 }; 816 817 static const struct pci_device_id pci_tbl[] = { 818 { 819 .vendor = PCI_VENDOR_ID_PHILIPS, 820 .device = PCI_DEVICE_ID_PHILIPS_SAA7146, 821 .subvendor = 0x0000, 822 .subdevice = 0x0000, 823 .driver_data = (unsigned long)&mxb, 824 }, { 825 .vendor = 0, 826 } 827 }; 828 829 MODULE_DEVICE_TABLE(pci, pci_tbl); 830 831 static struct saa7146_ext_vv vv_data = { 832 .inputs = MXB_INPUTS, 833 .capabilities = V4L2_CAP_TUNER | V4L2_CAP_VBI_CAPTURE | V4L2_CAP_AUDIO, 834 .stds = &standard[0], 835 .num_stds = ARRAY_SIZE(standard), 836 .std_callback = &std_callback, 837 }; 838 839 static struct saa7146_extension extension = { 840 .name = "Multimedia eXtension Board", 841 .flags = SAA7146_USE_I2C_IRQ, 842 843 .pci_tbl = &pci_tbl[0], 844 .module = THIS_MODULE, 845 846 .attach = mxb_attach, 847 .detach = mxb_detach, 848 849 .irq_mask = 0, 850 .irq_func = NULL, 851 }; 852 853 static int __init mxb_init_module(void) 854 { 855 if (saa7146_register_extension(&extension)) { 856 DEB_S("failed to register extension\n"); 857 return -ENODEV; 858 } 859 860 return 0; 861 } 862 863 static void __exit mxb_cleanup_module(void) 864 { 865 saa7146_unregister_extension(&extension); 866 } 867 868 module_init(mxb_init_module); 869 module_exit(mxb_cleanup_module); 870 871 MODULE_DESCRIPTION("video4linux-2 driver for the Siemens-Nixdorf 'Multimedia eXtension board'"); 872 MODULE_AUTHOR("Michael Hunold <michael@mihu.de>"); 873 MODULE_LICENSE("GPL"); 874