1 /* 2 mxb - v4l2 driver for the Multimedia eXtension Board 3 4 Copyright (C) 1998-2006 Michael Hunold <michael@mihu.de> 5 6 Visit http://www.themm.net/~mihu/linux/saa7146/mxb.html 7 for further details about this card. 8 9 This program is free software; you can redistribute it and/or modify 10 it under the terms of the GNU General Public License as published by 11 the Free Software Foundation; either version 2 of the License, or 12 (at your option) any later version. 13 14 This program is distributed in the hope that it will be useful, 15 but WITHOUT ANY WARRANTY; without even the implied warranty of 16 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 GNU General Public License for more details. 18 19 You should have received a copy of the GNU General Public License 20 along with this program; if not, write to the Free Software 21 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 22 */ 23 24 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 25 26 #define DEBUG_VARIABLE debug 27 28 #include <media/saa7146_vv.h> 29 #include <media/tuner.h> 30 #include <media/v4l2-common.h> 31 #include <media/saa7115.h> 32 #include <linux/module.h> 33 34 #include "tea6415c.h" 35 #include "tea6420.h" 36 37 #define MXB_AUDIOS 6 38 39 #define I2C_SAA7111A 0x24 40 #define I2C_TDA9840 0x42 41 #define I2C_TEA6415C 0x43 42 #define I2C_TEA6420_1 0x4c 43 #define I2C_TEA6420_2 0x4d 44 #define I2C_TUNER 0x60 45 46 #define MXB_BOARD_CAN_DO_VBI(dev) (dev->revision != 0) 47 48 /* global variable */ 49 static int mxb_num; 50 51 /* initial frequence the tuner will be tuned to. 52 in verden (lower saxony, germany) 4148 is a 53 channel called "phoenix" */ 54 static int freq = 4148; 55 module_param(freq, int, 0644); 56 MODULE_PARM_DESC(freq, "initial frequency the tuner will be tuned to while setup"); 57 58 static int debug; 59 module_param(debug, int, 0644); 60 MODULE_PARM_DESC(debug, "Turn on/off device debugging (default:off)."); 61 62 #define MXB_INPUTS 4 63 enum { TUNER, AUX1, AUX3, AUX3_YC }; 64 65 static struct v4l2_input mxb_inputs[MXB_INPUTS] = { 66 { TUNER, "Tuner", V4L2_INPUT_TYPE_TUNER, 0x3f, 0, 67 V4L2_STD_PAL_BG | V4L2_STD_PAL_I, 0, V4L2_IN_CAP_STD }, 68 { AUX1, "AUX1", V4L2_INPUT_TYPE_CAMERA, 0x3f, 0, 69 V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, 70 { AUX3, "AUX3 Composite", V4L2_INPUT_TYPE_CAMERA, 0x3f, 0, 71 V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, 72 { AUX3_YC, "AUX3 S-Video", V4L2_INPUT_TYPE_CAMERA, 0x3f, 0, 73 V4L2_STD_ALL, 0, V4L2_IN_CAP_STD }, 74 }; 75 76 /* this array holds the information, which port of the saa7146 each 77 input actually uses. the mxb uses port 0 for every input */ 78 static struct { 79 int hps_source; 80 int hps_sync; 81 } input_port_selection[MXB_INPUTS] = { 82 { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, 83 { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, 84 { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, 85 { SAA7146_HPS_SOURCE_PORT_A, SAA7146_HPS_SYNC_PORT_A }, 86 }; 87 88 /* this array holds the information of the audio source (mxb_audios), 89 which has to be switched corresponding to the video source (mxb_channels) */ 90 static int video_audio_connect[MXB_INPUTS] = 91 { 0, 1, 3, 3 }; 92 93 struct mxb_routing { 94 u32 input; 95 u32 output; 96 }; 97 98 /* these are the available audio sources, which can switched 99 to the line- and cd-output individually */ 100 static struct v4l2_audio mxb_audios[MXB_AUDIOS] = { 101 { 102 .index = 0, 103 .name = "Tuner", 104 .capability = V4L2_AUDCAP_STEREO, 105 } , { 106 .index = 1, 107 .name = "AUX1", 108 .capability = V4L2_AUDCAP_STEREO, 109 } , { 110 .index = 2, 111 .name = "AUX2", 112 .capability = V4L2_AUDCAP_STEREO, 113 } , { 114 .index = 3, 115 .name = "AUX3", 116 .capability = V4L2_AUDCAP_STEREO, 117 } , { 118 .index = 4, 119 .name = "Radio (X9)", 120 .capability = V4L2_AUDCAP_STEREO, 121 } , { 122 .index = 5, 123 .name = "CD-ROM (X10)", 124 .capability = V4L2_AUDCAP_STEREO, 125 } 126 }; 127 128 /* These are the necessary input-output-pins for bringing one audio source 129 (see above) to the CD-output. Note that gain is set to 0 in this table. */ 130 static struct mxb_routing TEA6420_cd[MXB_AUDIOS + 1][2] = { 131 { { 1, 1 }, { 1, 1 } }, /* Tuner */ 132 { { 5, 1 }, { 6, 1 } }, /* AUX 1 */ 133 { { 4, 1 }, { 6, 1 } }, /* AUX 2 */ 134 { { 3, 1 }, { 6, 1 } }, /* AUX 3 */ 135 { { 1, 1 }, { 3, 1 } }, /* Radio */ 136 { { 1, 1 }, { 2, 1 } }, /* CD-Rom */ 137 { { 6, 1 }, { 6, 1 } } /* Mute */ 138 }; 139 140 /* These are the necessary input-output-pins for bringing one audio source 141 (see above) to the line-output. Note that gain is set to 0 in this table. */ 142 static struct mxb_routing TEA6420_line[MXB_AUDIOS + 1][2] = { 143 { { 2, 3 }, { 1, 2 } }, 144 { { 5, 3 }, { 6, 2 } }, 145 { { 4, 3 }, { 6, 2 } }, 146 { { 3, 3 }, { 6, 2 } }, 147 { { 2, 3 }, { 3, 2 } }, 148 { { 2, 3 }, { 2, 2 } }, 149 { { 6, 3 }, { 6, 2 } } /* Mute */ 150 }; 151 152 struct mxb 153 { 154 struct video_device *video_dev; 155 struct video_device *vbi_dev; 156 157 struct i2c_adapter i2c_adapter; 158 159 struct v4l2_subdev *saa7111a; 160 struct v4l2_subdev *tda9840; 161 struct v4l2_subdev *tea6415c; 162 struct v4l2_subdev *tuner; 163 struct v4l2_subdev *tea6420_1; 164 struct v4l2_subdev *tea6420_2; 165 166 int cur_mode; /* current audio mode (mono, stereo, ...) */ 167 int cur_input; /* current input */ 168 int cur_audinput; /* current audio input */ 169 int cur_mute; /* current mute status */ 170 struct v4l2_frequency cur_freq; /* current frequency the tuner is tuned to */ 171 }; 172 173 #define saa7111a_call(mxb, o, f, args...) \ 174 v4l2_subdev_call(mxb->saa7111a, o, f, ##args) 175 #define tda9840_call(mxb, o, f, args...) \ 176 v4l2_subdev_call(mxb->tda9840, o, f, ##args) 177 #define tea6415c_call(mxb, o, f, args...) \ 178 v4l2_subdev_call(mxb->tea6415c, o, f, ##args) 179 #define tuner_call(mxb, o, f, args...) \ 180 v4l2_subdev_call(mxb->tuner, o, f, ##args) 181 #define call_all(dev, o, f, args...) \ 182 v4l2_device_call_until_err(&dev->v4l2_dev, 0, o, f, ##args) 183 184 static void mxb_update_audmode(struct mxb *mxb) 185 { 186 struct v4l2_tuner t = { 187 .audmode = mxb->cur_mode, 188 }; 189 190 tda9840_call(mxb, tuner, s_tuner, &t); 191 } 192 193 static inline void tea6420_route(struct mxb *mxb, int idx) 194 { 195 v4l2_subdev_call(mxb->tea6420_1, audio, s_routing, 196 TEA6420_cd[idx][0].input, TEA6420_cd[idx][0].output, 0); 197 v4l2_subdev_call(mxb->tea6420_2, audio, s_routing, 198 TEA6420_cd[idx][1].input, TEA6420_cd[idx][1].output, 0); 199 v4l2_subdev_call(mxb->tea6420_1, audio, s_routing, 200 TEA6420_line[idx][0].input, TEA6420_line[idx][0].output, 0); 201 v4l2_subdev_call(mxb->tea6420_2, audio, s_routing, 202 TEA6420_line[idx][1].input, TEA6420_line[idx][1].output, 0); 203 } 204 205 static struct saa7146_extension extension; 206 207 static int mxb_s_ctrl(struct v4l2_ctrl *ctrl) 208 { 209 struct saa7146_dev *dev = container_of(ctrl->handler, 210 struct saa7146_dev, ctrl_handler); 211 struct mxb *mxb = dev->ext_priv; 212 213 switch (ctrl->id) { 214 case V4L2_CID_AUDIO_MUTE: 215 mxb->cur_mute = ctrl->val; 216 /* switch the audio-source */ 217 tea6420_route(mxb, ctrl->val ? 6 : 218 video_audio_connect[mxb->cur_input]); 219 break; 220 default: 221 return -EINVAL; 222 } 223 return 0; 224 } 225 226 static const struct v4l2_ctrl_ops mxb_ctrl_ops = { 227 .s_ctrl = mxb_s_ctrl, 228 }; 229 230 static int mxb_probe(struct saa7146_dev *dev) 231 { 232 struct v4l2_ctrl_handler *hdl = &dev->ctrl_handler; 233 struct mxb *mxb = NULL; 234 235 v4l2_ctrl_new_std(hdl, &mxb_ctrl_ops, 236 V4L2_CID_AUDIO_MUTE, 0, 1, 1, 1); 237 if (hdl->error) 238 return hdl->error; 239 mxb = kzalloc(sizeof(struct mxb), GFP_KERNEL); 240 if (mxb == NULL) { 241 DEB_D("not enough kernel memory\n"); 242 return -ENOMEM; 243 } 244 245 246 snprintf(mxb->i2c_adapter.name, sizeof(mxb->i2c_adapter.name), "mxb%d", mxb_num); 247 248 saa7146_i2c_adapter_prepare(dev, &mxb->i2c_adapter, SAA7146_I2C_BUS_BIT_RATE_480); 249 if (i2c_add_adapter(&mxb->i2c_adapter) < 0) { 250 DEB_S("cannot register i2c-device. skipping.\n"); 251 kfree(mxb); 252 return -EFAULT; 253 } 254 255 mxb->saa7111a = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, 256 "saa7111", I2C_SAA7111A, NULL); 257 mxb->tea6420_1 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, 258 "tea6420", I2C_TEA6420_1, NULL); 259 mxb->tea6420_2 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, 260 "tea6420", I2C_TEA6420_2, NULL); 261 mxb->tea6415c = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, 262 "tea6415c", I2C_TEA6415C, NULL); 263 mxb->tda9840 = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, 264 "tda9840", I2C_TDA9840, NULL); 265 mxb->tuner = v4l2_i2c_new_subdev(&dev->v4l2_dev, &mxb->i2c_adapter, 266 "tuner", I2C_TUNER, NULL); 267 268 /* check if all devices are present */ 269 if (!mxb->tea6420_1 || !mxb->tea6420_2 || !mxb->tea6415c || 270 !mxb->tda9840 || !mxb->saa7111a || !mxb->tuner) { 271 pr_err("did not find all i2c devices. aborting\n"); 272 i2c_del_adapter(&mxb->i2c_adapter); 273 kfree(mxb); 274 return -ENODEV; 275 } 276 277 /* all devices are present, probe was successful */ 278 279 /* we store the pointer in our private data field */ 280 dev->ext_priv = mxb; 281 282 v4l2_ctrl_handler_setup(hdl); 283 284 return 0; 285 } 286 287 /* some init data for the saa7740, the so-called 'sound arena module'. 288 there are no specs available, so we simply use some init values */ 289 static struct { 290 int length; 291 char data[9]; 292 } mxb_saa7740_init[] = { 293 { 3, { 0x80, 0x00, 0x00 } },{ 3, { 0x80, 0x89, 0x00 } }, 294 { 3, { 0x80, 0xb0, 0x0a } },{ 3, { 0x00, 0x00, 0x00 } }, 295 { 3, { 0x49, 0x00, 0x00 } },{ 3, { 0x4a, 0x00, 0x00 } }, 296 { 3, { 0x4b, 0x00, 0x00 } },{ 3, { 0x4c, 0x00, 0x00 } }, 297 { 3, { 0x4d, 0x00, 0x00 } },{ 3, { 0x4e, 0x00, 0x00 } }, 298 { 3, { 0x4f, 0x00, 0x00 } },{ 3, { 0x50, 0x00, 0x00 } }, 299 { 3, { 0x51, 0x00, 0x00 } },{ 3, { 0x52, 0x00, 0x00 } }, 300 { 3, { 0x53, 0x00, 0x00 } },{ 3, { 0x54, 0x00, 0x00 } }, 301 { 3, { 0x55, 0x00, 0x00 } },{ 3, { 0x56, 0x00, 0x00 } }, 302 { 3, { 0x57, 0x00, 0x00 } },{ 3, { 0x58, 0x00, 0x00 } }, 303 { 3, { 0x59, 0x00, 0x00 } },{ 3, { 0x5a, 0x00, 0x00 } }, 304 { 3, { 0x5b, 0x00, 0x00 } },{ 3, { 0x5c, 0x00, 0x00 } }, 305 { 3, { 0x5d, 0x00, 0x00 } },{ 3, { 0x5e, 0x00, 0x00 } }, 306 { 3, { 0x5f, 0x00, 0x00 } },{ 3, { 0x60, 0x00, 0x00 } }, 307 { 3, { 0x61, 0x00, 0x00 } },{ 3, { 0x62, 0x00, 0x00 } }, 308 { 3, { 0x63, 0x00, 0x00 } },{ 3, { 0x64, 0x00, 0x00 } }, 309 { 3, { 0x65, 0x00, 0x00 } },{ 3, { 0x66, 0x00, 0x00 } }, 310 { 3, { 0x67, 0x00, 0x00 } },{ 3, { 0x68, 0x00, 0x00 } }, 311 { 3, { 0x69, 0x00, 0x00 } },{ 3, { 0x6a, 0x00, 0x00 } }, 312 { 3, { 0x6b, 0x00, 0x00 } },{ 3, { 0x6c, 0x00, 0x00 } }, 313 { 3, { 0x6d, 0x00, 0x00 } },{ 3, { 0x6e, 0x00, 0x00 } }, 314 { 3, { 0x6f, 0x00, 0x00 } },{ 3, { 0x70, 0x00, 0x00 } }, 315 { 3, { 0x71, 0x00, 0x00 } },{ 3, { 0x72, 0x00, 0x00 } }, 316 { 3, { 0x73, 0x00, 0x00 } },{ 3, { 0x74, 0x00, 0x00 } }, 317 { 3, { 0x75, 0x00, 0x00 } },{ 3, { 0x76, 0x00, 0x00 } }, 318 { 3, { 0x77, 0x00, 0x00 } },{ 3, { 0x41, 0x00, 0x42 } }, 319 { 3, { 0x42, 0x10, 0x42 } },{ 3, { 0x43, 0x20, 0x42 } }, 320 { 3, { 0x44, 0x30, 0x42 } },{ 3, { 0x45, 0x00, 0x01 } }, 321 { 3, { 0x46, 0x00, 0x01 } },{ 3, { 0x47, 0x00, 0x01 } }, 322 { 3, { 0x48, 0x00, 0x01 } }, 323 { 9, { 0x01, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } }, 324 { 9, { 0x21, 0x03, 0xc5, 0x5c, 0x7a, 0x85, 0x01, 0x00, 0x54 } }, 325 { 9, { 0x09, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } }, 326 { 9, { 0x29, 0x0b, 0xb4, 0x6b, 0x74, 0x85, 0x95, 0x00, 0x34 } }, 327 { 9, { 0x11, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } }, 328 { 9, { 0x31, 0x17, 0x43, 0x62, 0x68, 0x89, 0xd1, 0xff, 0xb0 } }, 329 { 9, { 0x19, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } }, 330 { 9, { 0x39, 0x20, 0x62, 0x51, 0x5a, 0x95, 0x19, 0x01, 0x50 } }, 331 { 9, { 0x05, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } }, 332 { 9, { 0x25, 0x3e, 0xd2, 0x69, 0x4e, 0x9a, 0x51, 0x00, 0xf0 } }, 333 { 9, { 0x0d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } }, 334 { 9, { 0x2d, 0x3d, 0xa1, 0x40, 0x7d, 0x9f, 0x29, 0xfe, 0x14 } }, 335 { 9, { 0x15, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } }, 336 { 9, { 0x35, 0x73, 0xa1, 0x50, 0x5d, 0xa6, 0xf5, 0xfe, 0x38 } }, 337 { 9, { 0x1d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } }, 338 { 9, { 0x3d, 0xed, 0xd0, 0x68, 0x29, 0xb4, 0xe1, 0x00, 0xb8 } }, 339 { 3, { 0x80, 0xb3, 0x0a } }, 340 {-1, { 0 } } 341 }; 342 343 /* bring hardware to a sane state. this has to be done, just in case someone 344 wants to capture from this device before it has been properly initialized. 345 the capture engine would badly fail, because no valid signal arrives on the 346 saa7146, thus leading to timeouts and stuff. */ 347 static int mxb_init_done(struct saa7146_dev* dev) 348 { 349 struct mxb* mxb = (struct mxb*)dev->ext_priv; 350 struct i2c_msg msg; 351 struct tuner_setup tun_setup; 352 v4l2_std_id std = V4L2_STD_PAL_BG; 353 354 int i = 0, err = 0; 355 356 /* mute audio on tea6420s */ 357 tea6420_route(mxb, 6); 358 359 /* select video mode in saa7111a */ 360 saa7111a_call(mxb, core, s_std, std); 361 362 /* select tuner-output on saa7111a */ 363 i = 0; 364 saa7111a_call(mxb, video, s_routing, SAA7115_COMPOSITE0, 365 SAA7111_FMT_CCIR, 0); 366 367 /* select a tuner type */ 368 tun_setup.mode_mask = T_ANALOG_TV; 369 tun_setup.addr = ADDR_UNSET; 370 tun_setup.type = TUNER_PHILIPS_PAL; 371 tuner_call(mxb, tuner, s_type_addr, &tun_setup); 372 /* tune in some frequency on tuner */ 373 mxb->cur_freq.tuner = 0; 374 mxb->cur_freq.type = V4L2_TUNER_ANALOG_TV; 375 mxb->cur_freq.frequency = freq; 376 tuner_call(mxb, tuner, s_frequency, &mxb->cur_freq); 377 378 /* set a default video standard */ 379 /* These two gpio calls set the GPIO pins that control the tda9820 */ 380 saa7146_write(dev, GPIO_CTRL, 0x00404050); 381 saa7111a_call(mxb, core, s_gpio, 1); 382 saa7111a_call(mxb, core, s_std, std); 383 tuner_call(mxb, core, s_std, std); 384 385 /* switch to tuner-channel on tea6415c */ 386 tea6415c_call(mxb, video, s_routing, 3, 17, 0); 387 388 /* select tuner-output on multicable on tea6415c */ 389 tea6415c_call(mxb, video, s_routing, 3, 13, 0); 390 391 /* the rest for mxb */ 392 mxb->cur_input = 0; 393 mxb->cur_audinput = video_audio_connect[mxb->cur_input]; 394 mxb->cur_mute = 1; 395 396 mxb->cur_mode = V4L2_TUNER_MODE_STEREO; 397 mxb_update_audmode(mxb); 398 399 /* check if the saa7740 (aka 'sound arena module') is present 400 on the mxb. if so, we must initialize it. due to lack of 401 informations about the saa7740, the values were reverse 402 engineered. */ 403 msg.addr = 0x1b; 404 msg.flags = 0; 405 msg.len = mxb_saa7740_init[0].length; 406 msg.buf = &mxb_saa7740_init[0].data[0]; 407 408 err = i2c_transfer(&mxb->i2c_adapter, &msg, 1); 409 if (err == 1) { 410 /* the sound arena module is a pos, that's probably the reason 411 philips refuses to hand out a datasheet for the saa7740... 412 it seems to screw up the i2c bus, so we disable fast irq 413 based i2c transactions here and rely on the slow and safe 414 polling method ... */ 415 extension.flags &= ~SAA7146_USE_I2C_IRQ; 416 for (i = 1; ; i++) { 417 if (-1 == mxb_saa7740_init[i].length) 418 break; 419 420 msg.len = mxb_saa7740_init[i].length; 421 msg.buf = &mxb_saa7740_init[i].data[0]; 422 err = i2c_transfer(&mxb->i2c_adapter, &msg, 1); 423 if (err != 1) { 424 DEB_D("failed to initialize 'sound arena module'\n"); 425 goto err; 426 } 427 } 428 pr_info("'sound arena module' detected\n"); 429 } 430 err: 431 /* the rest for saa7146: you should definitely set some basic values 432 for the input-port handling of the saa7146. */ 433 434 /* ext->saa has been filled by the core driver */ 435 436 /* some stuff is done via variables */ 437 saa7146_set_hps_source_and_sync(dev, input_port_selection[mxb->cur_input].hps_source, 438 input_port_selection[mxb->cur_input].hps_sync); 439 440 /* some stuff is done via direct write to the registers */ 441 442 /* this is ugly, but because of the fact that this is completely 443 hardware dependend, it should be done directly... */ 444 saa7146_write(dev, DD1_STREAM_B, 0x00000000); 445 saa7146_write(dev, DD1_INIT, 0x02000200); 446 saa7146_write(dev, MC2, (MASK_09 | MASK_25 | MASK_10 | MASK_26)); 447 448 return 0; 449 } 450 451 /* interrupt-handler. this gets called when irq_mask is != 0. 452 it must clear the interrupt-bits in irq_mask it has handled */ 453 /* 454 void mxb_irq_bh(struct saa7146_dev* dev, u32* irq_mask) 455 { 456 struct mxb* mxb = (struct mxb*)dev->ext_priv; 457 } 458 */ 459 460 static int vidioc_enum_input(struct file *file, void *fh, struct v4l2_input *i) 461 { 462 DEB_EE("VIDIOC_ENUMINPUT %d\n", i->index); 463 if (i->index >= MXB_INPUTS) 464 return -EINVAL; 465 memcpy(i, &mxb_inputs[i->index], sizeof(struct v4l2_input)); 466 return 0; 467 } 468 469 static int vidioc_g_input(struct file *file, void *fh, unsigned int *i) 470 { 471 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 472 struct mxb *mxb = (struct mxb *)dev->ext_priv; 473 *i = mxb->cur_input; 474 475 DEB_EE("VIDIOC_G_INPUT %d\n", *i); 476 return 0; 477 } 478 479 static int vidioc_s_input(struct file *file, void *fh, unsigned int input) 480 { 481 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 482 struct mxb *mxb = (struct mxb *)dev->ext_priv; 483 int err = 0; 484 int i = 0; 485 486 DEB_EE("VIDIOC_S_INPUT %d\n", input); 487 488 if (input >= MXB_INPUTS) 489 return -EINVAL; 490 491 mxb->cur_input = input; 492 493 saa7146_set_hps_source_and_sync(dev, input_port_selection[input].hps_source, 494 input_port_selection[input].hps_sync); 495 496 /* prepare switching of tea6415c and saa7111a; 497 have a look at the 'background'-file for further informations */ 498 switch (input) { 499 case TUNER: 500 i = SAA7115_COMPOSITE0; 501 502 err = tea6415c_call(mxb, video, s_routing, 3, 17, 0); 503 504 /* connect tuner-output always to multicable */ 505 if (!err) 506 err = tea6415c_call(mxb, video, s_routing, 3, 13, 0); 507 break; 508 case AUX3_YC: 509 /* nothing to be done here. aux3_yc is 510 directly connected to the saa711a */ 511 i = SAA7115_SVIDEO1; 512 break; 513 case AUX3: 514 /* nothing to be done here. aux3 is 515 directly connected to the saa711a */ 516 i = SAA7115_COMPOSITE1; 517 break; 518 case AUX1: 519 i = SAA7115_COMPOSITE0; 520 err = tea6415c_call(mxb, video, s_routing, 1, 17, 0); 521 break; 522 } 523 524 if (err) 525 return err; 526 527 /* switch video in saa7111a */ 528 if (saa7111a_call(mxb, video, s_routing, i, SAA7111_FMT_CCIR, 0)) 529 pr_err("VIDIOC_S_INPUT: could not address saa7111a\n"); 530 531 mxb->cur_audinput = video_audio_connect[input]; 532 /* switch the audio-source only if necessary */ 533 if (0 == mxb->cur_mute) 534 tea6420_route(mxb, mxb->cur_audinput); 535 if (mxb->cur_audinput == 0) 536 mxb_update_audmode(mxb); 537 538 return 0; 539 } 540 541 static int vidioc_g_tuner(struct file *file, void *fh, struct v4l2_tuner *t) 542 { 543 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 544 struct mxb *mxb = (struct mxb *)dev->ext_priv; 545 546 if (t->index) { 547 DEB_D("VIDIOC_G_TUNER: channel %d does not have a tuner attached\n", 548 t->index); 549 return -EINVAL; 550 } 551 552 DEB_EE("VIDIOC_G_TUNER: %d\n", t->index); 553 554 memset(t, 0, sizeof(*t)); 555 strlcpy(t->name, "TV Tuner", sizeof(t->name)); 556 t->type = V4L2_TUNER_ANALOG_TV; 557 t->capability = V4L2_TUNER_CAP_NORM | V4L2_TUNER_CAP_STEREO | 558 V4L2_TUNER_CAP_LANG1 | V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; 559 t->audmode = mxb->cur_mode; 560 return call_all(dev, tuner, g_tuner, t); 561 } 562 563 static int vidioc_s_tuner(struct file *file, void *fh, const struct v4l2_tuner *t) 564 { 565 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 566 struct mxb *mxb = (struct mxb *)dev->ext_priv; 567 568 if (t->index) { 569 DEB_D("VIDIOC_S_TUNER: channel %d does not have a tuner attached\n", 570 t->index); 571 return -EINVAL; 572 } 573 574 mxb->cur_mode = t->audmode; 575 return call_all(dev, tuner, s_tuner, t); 576 } 577 578 static int vidioc_querystd(struct file *file, void *fh, v4l2_std_id *norm) 579 { 580 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 581 582 return call_all(dev, video, querystd, norm); 583 } 584 585 static int vidioc_g_frequency(struct file *file, void *fh, struct v4l2_frequency *f) 586 { 587 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 588 struct mxb *mxb = (struct mxb *)dev->ext_priv; 589 590 if (f->tuner) 591 return -EINVAL; 592 *f = mxb->cur_freq; 593 594 DEB_EE("VIDIOC_G_FREQ: freq:0x%08x\n", mxb->cur_freq.frequency); 595 return 0; 596 } 597 598 static int vidioc_s_frequency(struct file *file, void *fh, const struct v4l2_frequency *f) 599 { 600 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 601 struct mxb *mxb = (struct mxb *)dev->ext_priv; 602 struct saa7146_vv *vv = dev->vv_data; 603 604 if (f->tuner) 605 return -EINVAL; 606 607 if (V4L2_TUNER_ANALOG_TV != f->type) 608 return -EINVAL; 609 610 DEB_EE("VIDIOC_S_FREQUENCY: freq:0x%08x\n", mxb->cur_freq.frequency); 611 612 /* tune in desired frequency */ 613 tuner_call(mxb, tuner, s_frequency, f); 614 /* let the tuner subdev clamp the frequency to the tuner range */ 615 mxb->cur_freq = *f; 616 tuner_call(mxb, tuner, g_frequency, &mxb->cur_freq); 617 if (mxb->cur_audinput == 0) 618 mxb_update_audmode(mxb); 619 620 if (mxb->cur_input) 621 return 0; 622 623 /* hack: changing the frequency should invalidate the vbi-counter (=> alevt) */ 624 spin_lock(&dev->slock); 625 vv->vbi_fieldcount = 0; 626 spin_unlock(&dev->slock); 627 628 return 0; 629 } 630 631 static int vidioc_enumaudio(struct file *file, void *fh, struct v4l2_audio *a) 632 { 633 if (a->index >= MXB_AUDIOS) 634 return -EINVAL; 635 *a = mxb_audios[a->index]; 636 return 0; 637 } 638 639 static int vidioc_g_audio(struct file *file, void *fh, struct v4l2_audio *a) 640 { 641 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 642 struct mxb *mxb = (struct mxb *)dev->ext_priv; 643 644 DEB_EE("VIDIOC_G_AUDIO\n"); 645 *a = mxb_audios[mxb->cur_audinput]; 646 return 0; 647 } 648 649 static int vidioc_s_audio(struct file *file, void *fh, const struct v4l2_audio *a) 650 { 651 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 652 struct mxb *mxb = (struct mxb *)dev->ext_priv; 653 654 DEB_D("VIDIOC_S_AUDIO %d\n", a->index); 655 if (mxb_inputs[mxb->cur_input].audioset & (1 << a->index)) { 656 if (mxb->cur_audinput != a->index) { 657 mxb->cur_audinput = a->index; 658 tea6420_route(mxb, a->index); 659 if (mxb->cur_audinput == 0) 660 mxb_update_audmode(mxb); 661 } 662 return 0; 663 } 664 return -EINVAL; 665 } 666 667 #ifdef CONFIG_VIDEO_ADV_DEBUG 668 static int vidioc_g_register(struct file *file, void *fh, struct v4l2_dbg_register *reg) 669 { 670 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 671 672 if (reg->reg > pci_resource_len(dev->pci, 0) - 4) 673 return -EINVAL; 674 reg->val = saa7146_read(dev, reg->reg); 675 reg->size = 4; 676 return 0; 677 } 678 679 static int vidioc_s_register(struct file *file, void *fh, const struct v4l2_dbg_register *reg) 680 { 681 struct saa7146_dev *dev = ((struct saa7146_fh *)fh)->dev; 682 683 if (reg->reg > pci_resource_len(dev->pci, 0) - 4) 684 return -EINVAL; 685 saa7146_write(dev, reg->reg, reg->val); 686 return 0; 687 } 688 #endif 689 690 static struct saa7146_ext_vv vv_data; 691 692 /* this function only gets called when the probing was successful */ 693 static int mxb_attach(struct saa7146_dev *dev, struct saa7146_pci_extension_data *info) 694 { 695 struct mxb *mxb; 696 697 DEB_EE("dev:%p\n", dev); 698 699 saa7146_vv_init(dev, &vv_data); 700 if (mxb_probe(dev)) { 701 saa7146_vv_release(dev); 702 return -1; 703 } 704 mxb = (struct mxb *)dev->ext_priv; 705 706 vv_data.vid_ops.vidioc_enum_input = vidioc_enum_input; 707 vv_data.vid_ops.vidioc_g_input = vidioc_g_input; 708 vv_data.vid_ops.vidioc_s_input = vidioc_s_input; 709 vv_data.vid_ops.vidioc_querystd = vidioc_querystd; 710 vv_data.vid_ops.vidioc_g_tuner = vidioc_g_tuner; 711 vv_data.vid_ops.vidioc_s_tuner = vidioc_s_tuner; 712 vv_data.vid_ops.vidioc_g_frequency = vidioc_g_frequency; 713 vv_data.vid_ops.vidioc_s_frequency = vidioc_s_frequency; 714 vv_data.vid_ops.vidioc_enumaudio = vidioc_enumaudio; 715 vv_data.vid_ops.vidioc_g_audio = vidioc_g_audio; 716 vv_data.vid_ops.vidioc_s_audio = vidioc_s_audio; 717 #ifdef CONFIG_VIDEO_ADV_DEBUG 718 vv_data.vid_ops.vidioc_g_register = vidioc_g_register; 719 vv_data.vid_ops.vidioc_s_register = vidioc_s_register; 720 #endif 721 if (saa7146_register_device(&mxb->video_dev, dev, "mxb", VFL_TYPE_GRABBER)) { 722 ERR("cannot register capture v4l2 device. skipping.\n"); 723 saa7146_vv_release(dev); 724 return -1; 725 } 726 727 /* initialization stuff (vbi) (only for revision > 0 and for extensions which want it)*/ 728 if (MXB_BOARD_CAN_DO_VBI(dev)) { 729 if (saa7146_register_device(&mxb->vbi_dev, dev, "mxb", VFL_TYPE_VBI)) { 730 ERR("cannot register vbi v4l2 device. skipping.\n"); 731 } 732 } 733 734 pr_info("found Multimedia eXtension Board #%d\n", mxb_num); 735 736 mxb_num++; 737 mxb_init_done(dev); 738 return 0; 739 } 740 741 static int mxb_detach(struct saa7146_dev *dev) 742 { 743 struct mxb *mxb = (struct mxb *)dev->ext_priv; 744 745 DEB_EE("dev:%p\n", dev); 746 747 /* mute audio on tea6420s */ 748 tea6420_route(mxb, 6); 749 750 saa7146_unregister_device(&mxb->video_dev,dev); 751 if (MXB_BOARD_CAN_DO_VBI(dev)) 752 saa7146_unregister_device(&mxb->vbi_dev, dev); 753 saa7146_vv_release(dev); 754 755 mxb_num--; 756 757 i2c_del_adapter(&mxb->i2c_adapter); 758 kfree(mxb); 759 760 return 0; 761 } 762 763 static int std_callback(struct saa7146_dev *dev, struct saa7146_standard *standard) 764 { 765 struct mxb *mxb = (struct mxb *)dev->ext_priv; 766 767 if (V4L2_STD_PAL_I == standard->id) { 768 v4l2_std_id std = V4L2_STD_PAL_I; 769 770 DEB_D("VIDIOC_S_STD: setting mxb for PAL_I\n"); 771 /* These two gpio calls set the GPIO pins that control the tda9820 */ 772 saa7146_write(dev, GPIO_CTRL, 0x00404050); 773 saa7111a_call(mxb, core, s_gpio, 0); 774 saa7111a_call(mxb, core, s_std, std); 775 if (mxb->cur_input == 0) 776 tuner_call(mxb, core, s_std, std); 777 } else { 778 v4l2_std_id std = V4L2_STD_PAL_BG; 779 780 if (mxb->cur_input) 781 std = standard->id; 782 DEB_D("VIDIOC_S_STD: setting mxb for PAL/NTSC/SECAM\n"); 783 /* These two gpio calls set the GPIO pins that control the tda9820 */ 784 saa7146_write(dev, GPIO_CTRL, 0x00404050); 785 saa7111a_call(mxb, core, s_gpio, 1); 786 saa7111a_call(mxb, core, s_std, std); 787 if (mxb->cur_input == 0) 788 tuner_call(mxb, core, s_std, std); 789 } 790 return 0; 791 } 792 793 static struct saa7146_standard standard[] = { 794 { 795 .name = "PAL-BG", .id = V4L2_STD_PAL_BG, 796 .v_offset = 0x17, .v_field = 288, 797 .h_offset = 0x14, .h_pixels = 680, 798 .v_max_out = 576, .h_max_out = 768, 799 }, { 800 .name = "PAL-I", .id = V4L2_STD_PAL_I, 801 .v_offset = 0x17, .v_field = 288, 802 .h_offset = 0x14, .h_pixels = 680, 803 .v_max_out = 576, .h_max_out = 768, 804 }, { 805 .name = "NTSC", .id = V4L2_STD_NTSC, 806 .v_offset = 0x16, .v_field = 240, 807 .h_offset = 0x06, .h_pixels = 708, 808 .v_max_out = 480, .h_max_out = 640, 809 }, { 810 .name = "SECAM", .id = V4L2_STD_SECAM, 811 .v_offset = 0x14, .v_field = 288, 812 .h_offset = 0x14, .h_pixels = 720, 813 .v_max_out = 576, .h_max_out = 768, 814 } 815 }; 816 817 static struct saa7146_pci_extension_data mxb = { 818 .ext_priv = "Multimedia eXtension Board", 819 .ext = &extension, 820 }; 821 822 static struct pci_device_id pci_tbl[] = { 823 { 824 .vendor = PCI_VENDOR_ID_PHILIPS, 825 .device = PCI_DEVICE_ID_PHILIPS_SAA7146, 826 .subvendor = 0x0000, 827 .subdevice = 0x0000, 828 .driver_data = (unsigned long)&mxb, 829 }, { 830 .vendor = 0, 831 } 832 }; 833 834 MODULE_DEVICE_TABLE(pci, pci_tbl); 835 836 static struct saa7146_ext_vv vv_data = { 837 .inputs = MXB_INPUTS, 838 .capabilities = V4L2_CAP_TUNER | V4L2_CAP_VBI_CAPTURE | V4L2_CAP_AUDIO, 839 .stds = &standard[0], 840 .num_stds = sizeof(standard)/sizeof(struct saa7146_standard), 841 .std_callback = &std_callback, 842 }; 843 844 static struct saa7146_extension extension = { 845 .name = "Multimedia eXtension Board", 846 .flags = SAA7146_USE_I2C_IRQ, 847 848 .pci_tbl = &pci_tbl[0], 849 .module = THIS_MODULE, 850 851 .attach = mxb_attach, 852 .detach = mxb_detach, 853 854 .irq_mask = 0, 855 .irq_func = NULL, 856 }; 857 858 static int __init mxb_init_module(void) 859 { 860 if (saa7146_register_extension(&extension)) { 861 DEB_S("failed to register extension\n"); 862 return -ENODEV; 863 } 864 865 return 0; 866 } 867 868 static void __exit mxb_cleanup_module(void) 869 { 870 saa7146_unregister_extension(&extension); 871 } 872 873 module_init(mxb_init_module); 874 module_exit(mxb_cleanup_module); 875 876 MODULE_DESCRIPTION("video4linux-2 driver for the Siemens-Nixdorf 'Multimedia eXtension board'"); 877 MODULE_AUTHOR("Michael Hunold <michael@mihu.de>"); 878 MODULE_LICENSE("GPL"); 879