1 /* 2 * 3 * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs] 4 * 5 * Extended 3 / 2005 by Hartmut Hackmann to support various 6 * cards with the tda10046 DVB-T channel decoder 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or 11 * (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21 */ 22 23 #include "saa7134.h" 24 #include "saa7134-reg.h" 25 26 #include <linux/init.h> 27 #include <linux/list.h> 28 #include <linux/module.h> 29 #include <linux/kernel.h> 30 #include <linux/delay.h> 31 #include <linux/kthread.h> 32 #include <linux/suspend.h> 33 34 #include <media/v4l2-common.h> 35 #include "dvb-pll.h" 36 #include <dvb_frontend.h> 37 38 #include "mt352.h" 39 #include "mt352_priv.h" /* FIXME */ 40 #include "tda1004x.h" 41 #include "nxt200x.h" 42 #include "tuner-xc2028.h" 43 #include "xc5000.h" 44 45 #include "tda10086.h" 46 #include "tda826x.h" 47 #include "tda827x.h" 48 #include "isl6421.h" 49 #include "isl6405.h" 50 #include "lnbp21.h" 51 #include "tuner-simple.h" 52 #include "tda10048.h" 53 #include "tda18271.h" 54 #include "lgdt3305.h" 55 #include "tda8290.h" 56 #include "mb86a20s.h" 57 #include "lgs8gxx.h" 58 59 #include "zl10353.h" 60 #include "qt1010.h" 61 62 #include "zl10036.h" 63 #include "zl10039.h" 64 #include "mt312.h" 65 #include "s5h1411.h" 66 67 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); 68 MODULE_LICENSE("GPL"); 69 70 static unsigned int antenna_pwr; 71 72 module_param(antenna_pwr, int, 0444); 73 MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)"); 74 75 static int use_frontend; 76 module_param(use_frontend, int, 0644); 77 MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)"); 78 79 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); 80 81 /* ------------------------------------------------------------------ 82 * mt352 based DVB-T cards 83 */ 84 85 static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on) 86 { 87 u32 ok; 88 89 if (!on) { 90 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26)); 91 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); 92 return 0; 93 } 94 95 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26)); 96 saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); 97 udelay(10); 98 99 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 28)); 100 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28)); 101 udelay(10); 102 saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28)); 103 udelay(10); 104 ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27); 105 pr_debug("%s %s\n", __func__, ok ? "on" : "off"); 106 107 if (!ok) 108 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); 109 return ok; 110 } 111 112 static int mt352_pinnacle_init(struct dvb_frontend* fe) 113 { 114 static u8 clock_config [] = { CLOCK_CTL, 0x3d, 0x28 }; 115 static u8 reset [] = { RESET, 0x80 }; 116 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; 117 static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; 118 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x31 }; 119 static u8 fsm_ctl_cfg[] = { 0x7b, 0x04 }; 120 static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x0f }; 121 static u8 scan_ctl_cfg [] = { SCAN_CTL, 0x0d }; 122 static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 }; 123 124 pr_debug("%s called\n", __func__); 125 126 mt352_write(fe, clock_config, sizeof(clock_config)); 127 udelay(200); 128 mt352_write(fe, reset, sizeof(reset)); 129 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); 130 mt352_write(fe, agc_cfg, sizeof(agc_cfg)); 131 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); 132 mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); 133 134 mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg)); 135 mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg)); 136 mt352_write(fe, irq_cfg, sizeof(irq_cfg)); 137 138 return 0; 139 } 140 141 static int mt352_aver777_init(struct dvb_frontend* fe) 142 { 143 static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; 144 static u8 reset [] = { RESET, 0x80 }; 145 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; 146 static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; 147 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 }; 148 149 mt352_write(fe, clock_config, sizeof(clock_config)); 150 udelay(200); 151 mt352_write(fe, reset, sizeof(reset)); 152 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); 153 mt352_write(fe, agc_cfg, sizeof(agc_cfg)); 154 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); 155 156 return 0; 157 } 158 159 static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe) 160 { 161 static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; 162 static u8 reset [] = { RESET, 0x80 }; 163 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; 164 static u8 agc_cfg [] = { AGC_TARGET, 0xe }; 165 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 }; 166 167 mt352_write(fe, clock_config, sizeof(clock_config)); 168 udelay(200); 169 mt352_write(fe, reset, sizeof(reset)); 170 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); 171 mt352_write(fe, agc_cfg, sizeof(agc_cfg)); 172 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); 173 return 0; 174 } 175 176 static int mt352_pinnacle_tuner_set_params(struct dvb_frontend *fe) 177 { 178 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 179 u8 off[] = { 0x00, 0xf1}; 180 u8 on[] = { 0x00, 0x71}; 181 struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)}; 182 183 struct saa7134_dev *dev = fe->dvb->priv; 184 struct v4l2_frequency f; 185 186 /* set frequency (mt2050) */ 187 f.tuner = 0; 188 f.type = V4L2_TUNER_DIGITAL_TV; 189 f.frequency = c->frequency / 1000 * 16 / 1000; 190 if (fe->ops.i2c_gate_ctrl) 191 fe->ops.i2c_gate_ctrl(fe, 1); 192 i2c_transfer(&dev->i2c_adap, &msg, 1); 193 saa_call_all(dev, tuner, s_frequency, &f); 194 msg.buf = on; 195 if (fe->ops.i2c_gate_ctrl) 196 fe->ops.i2c_gate_ctrl(fe, 1); 197 i2c_transfer(&dev->i2c_adap, &msg, 1); 198 199 pinnacle_antenna_pwr(dev, antenna_pwr); 200 201 /* mt352 setup */ 202 return mt352_pinnacle_init(fe); 203 } 204 205 static struct mt352_config pinnacle_300i = { 206 .demod_address = 0x3c >> 1, 207 .adc_clock = 20333, 208 .if2 = 36150, 209 .no_tuner = 1, 210 .demod_init = mt352_pinnacle_init, 211 }; 212 213 static struct mt352_config avermedia_777 = { 214 .demod_address = 0xf, 215 .demod_init = mt352_aver777_init, 216 }; 217 218 static struct mt352_config avermedia_xc3028_mt352_dev = { 219 .demod_address = (0x1e >> 1), 220 .no_tuner = 1, 221 .demod_init = mt352_avermedia_xc3028_init, 222 }; 223 224 static struct tda18271_std_map mb86a20s_tda18271_std_map = { 225 .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, 226 .if_lvl = 7, .rfagc_top = 0x37, }, 227 }; 228 229 static struct tda18271_config kworld_tda18271_config = { 230 .std_map = &mb86a20s_tda18271_std_map, 231 .gate = TDA18271_GATE_DIGITAL, 232 .config = 3, /* Use tuner callback for AGC */ 233 234 }; 235 236 static const struct mb86a20s_config kworld_mb86a20s_config = { 237 .demod_address = 0x10, 238 }; 239 240 static int kworld_sbtvd_gate_ctrl(struct dvb_frontend* fe, int enable) 241 { 242 struct saa7134_dev *dev = fe->dvb->priv; 243 244 unsigned char initmsg[] = {0x45, 0x97}; 245 unsigned char msg_enable[] = {0x45, 0xc1}; 246 unsigned char msg_disable[] = {0x45, 0x81}; 247 struct i2c_msg msg = {.addr = 0x4b, .flags = 0, .buf = initmsg, .len = 2}; 248 249 if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { 250 pr_warn("could not access the I2C gate\n"); 251 return -EIO; 252 } 253 if (enable) 254 msg.buf = msg_enable; 255 else 256 msg.buf = msg_disable; 257 if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { 258 pr_warn("could not access the I2C gate\n"); 259 return -EIO; 260 } 261 msleep(20); 262 return 0; 263 } 264 265 /* ================================================================== 266 * tda1004x based DVB-T cards, helper functions 267 */ 268 269 static int philips_tda1004x_request_firmware(struct dvb_frontend *fe, 270 const struct firmware **fw, char *name) 271 { 272 struct saa7134_dev *dev = fe->dvb->priv; 273 return request_firmware(fw, name, &dev->pci->dev); 274 } 275 276 /* ------------------------------------------------------------------ 277 * these tuners are tu1216, td1316(a) 278 */ 279 280 static int philips_tda6651_pll_set(struct dvb_frontend *fe) 281 { 282 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 283 struct saa7134_dev *dev = fe->dvb->priv; 284 struct tda1004x_state *state = fe->demodulator_priv; 285 u8 addr = state->config->tuner_address; 286 u8 tuner_buf[4]; 287 struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len = 288 sizeof(tuner_buf) }; 289 int tuner_frequency = 0; 290 u8 band, cp, filter; 291 292 /* determine charge pump */ 293 tuner_frequency = c->frequency + 36166000; 294 if (tuner_frequency < 87000000) 295 return -EINVAL; 296 else if (tuner_frequency < 130000000) 297 cp = 3; 298 else if (tuner_frequency < 160000000) 299 cp = 5; 300 else if (tuner_frequency < 200000000) 301 cp = 6; 302 else if (tuner_frequency < 290000000) 303 cp = 3; 304 else if (tuner_frequency < 420000000) 305 cp = 5; 306 else if (tuner_frequency < 480000000) 307 cp = 6; 308 else if (tuner_frequency < 620000000) 309 cp = 3; 310 else if (tuner_frequency < 830000000) 311 cp = 5; 312 else if (tuner_frequency < 895000000) 313 cp = 7; 314 else 315 return -EINVAL; 316 317 /* determine band */ 318 if (c->frequency < 49000000) 319 return -EINVAL; 320 else if (c->frequency < 161000000) 321 band = 1; 322 else if (c->frequency < 444000000) 323 band = 2; 324 else if (c->frequency < 861000000) 325 band = 4; 326 else 327 return -EINVAL; 328 329 /* setup PLL filter */ 330 switch (c->bandwidth_hz) { 331 case 6000000: 332 filter = 0; 333 break; 334 335 case 7000000: 336 filter = 0; 337 break; 338 339 case 8000000: 340 filter = 1; 341 break; 342 343 default: 344 return -EINVAL; 345 } 346 347 /* calculate divisor 348 * ((36166000+((1000000/6)/2)) + Finput)/(1000000/6) 349 */ 350 tuner_frequency = (((c->frequency / 1000) * 6) + 217496) / 1000; 351 352 /* setup tuner buffer */ 353 tuner_buf[0] = (tuner_frequency >> 8) & 0x7f; 354 tuner_buf[1] = tuner_frequency & 0xff; 355 tuner_buf[2] = 0xca; 356 tuner_buf[3] = (cp << 5) | (filter << 3) | band; 357 358 if (fe->ops.i2c_gate_ctrl) 359 fe->ops.i2c_gate_ctrl(fe, 1); 360 if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) { 361 pr_warn("could not write to tuner at addr: 0x%02x\n", 362 addr << 1); 363 return -EIO; 364 } 365 msleep(1); 366 return 0; 367 } 368 369 static int philips_tu1216_init(struct dvb_frontend *fe) 370 { 371 struct saa7134_dev *dev = fe->dvb->priv; 372 struct tda1004x_state *state = fe->demodulator_priv; 373 u8 addr = state->config->tuner_address; 374 static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab }; 375 struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) }; 376 377 /* setup PLL configuration */ 378 if (fe->ops.i2c_gate_ctrl) 379 fe->ops.i2c_gate_ctrl(fe, 1); 380 if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) 381 return -EIO; 382 msleep(1); 383 384 return 0; 385 } 386 387 /* ------------------------------------------------------------------ */ 388 389 static struct tda1004x_config philips_tu1216_60_config = { 390 .demod_address = 0x8, 391 .invert = 1, 392 .invert_oclk = 0, 393 .xtal_freq = TDA10046_XTAL_4M, 394 .agc_config = TDA10046_AGC_DEFAULT, 395 .if_freq = TDA10046_FREQ_3617, 396 .tuner_address = 0x60, 397 .request_firmware = philips_tda1004x_request_firmware 398 }; 399 400 static struct tda1004x_config philips_tu1216_61_config = { 401 402 .demod_address = 0x8, 403 .invert = 1, 404 .invert_oclk = 0, 405 .xtal_freq = TDA10046_XTAL_4M, 406 .agc_config = TDA10046_AGC_DEFAULT, 407 .if_freq = TDA10046_FREQ_3617, 408 .tuner_address = 0x61, 409 .request_firmware = philips_tda1004x_request_firmware 410 }; 411 412 /* ------------------------------------------------------------------ */ 413 414 static int philips_td1316_tuner_init(struct dvb_frontend *fe) 415 { 416 struct saa7134_dev *dev = fe->dvb->priv; 417 struct tda1004x_state *state = fe->demodulator_priv; 418 u8 addr = state->config->tuner_address; 419 static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab }; 420 struct i2c_msg init_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) }; 421 422 /* setup PLL configuration */ 423 if (fe->ops.i2c_gate_ctrl) 424 fe->ops.i2c_gate_ctrl(fe, 1); 425 if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) 426 return -EIO; 427 return 0; 428 } 429 430 static int philips_td1316_tuner_set_params(struct dvb_frontend *fe) 431 { 432 return philips_tda6651_pll_set(fe); 433 } 434 435 static int philips_td1316_tuner_sleep(struct dvb_frontend *fe) 436 { 437 struct saa7134_dev *dev = fe->dvb->priv; 438 struct tda1004x_state *state = fe->demodulator_priv; 439 u8 addr = state->config->tuner_address; 440 static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 }; 441 struct i2c_msg analog_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) }; 442 443 /* switch the tuner to analog mode */ 444 if (fe->ops.i2c_gate_ctrl) 445 fe->ops.i2c_gate_ctrl(fe, 1); 446 if (i2c_transfer(&dev->i2c_adap, &analog_msg, 1) != 1) 447 return -EIO; 448 return 0; 449 } 450 451 /* ------------------------------------------------------------------ */ 452 453 static int philips_europa_tuner_init(struct dvb_frontend *fe) 454 { 455 struct saa7134_dev *dev = fe->dvb->priv; 456 static u8 msg[] = { 0x00, 0x40}; 457 struct i2c_msg init_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) }; 458 459 460 if (philips_td1316_tuner_init(fe)) 461 return -EIO; 462 msleep(1); 463 if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) 464 return -EIO; 465 466 return 0; 467 } 468 469 static int philips_europa_tuner_sleep(struct dvb_frontend *fe) 470 { 471 struct saa7134_dev *dev = fe->dvb->priv; 472 473 static u8 msg[] = { 0x00, 0x14 }; 474 struct i2c_msg analog_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) }; 475 476 if (philips_td1316_tuner_sleep(fe)) 477 return -EIO; 478 479 /* switch the board to analog mode */ 480 if (fe->ops.i2c_gate_ctrl) 481 fe->ops.i2c_gate_ctrl(fe, 1); 482 i2c_transfer(&dev->i2c_adap, &analog_msg, 1); 483 return 0; 484 } 485 486 static int philips_europa_demod_sleep(struct dvb_frontend *fe) 487 { 488 struct saa7134_dev *dev = fe->dvb->priv; 489 490 if (dev->original_demod_sleep) 491 dev->original_demod_sleep(fe); 492 fe->ops.i2c_gate_ctrl(fe, 1); 493 return 0; 494 } 495 496 static struct tda1004x_config philips_europa_config = { 497 498 .demod_address = 0x8, 499 .invert = 0, 500 .invert_oclk = 0, 501 .xtal_freq = TDA10046_XTAL_4M, 502 .agc_config = TDA10046_AGC_IFO_AUTO_POS, 503 .if_freq = TDA10046_FREQ_052, 504 .tuner_address = 0x61, 505 .request_firmware = philips_tda1004x_request_firmware 506 }; 507 508 static struct tda1004x_config medion_cardbus = { 509 .demod_address = 0x08, 510 .invert = 1, 511 .invert_oclk = 0, 512 .xtal_freq = TDA10046_XTAL_16M, 513 .agc_config = TDA10046_AGC_IFO_AUTO_NEG, 514 .if_freq = TDA10046_FREQ_3613, 515 .tuner_address = 0x61, 516 .request_firmware = philips_tda1004x_request_firmware 517 }; 518 519 static struct tda1004x_config technotrend_budget_t3000_config = { 520 .demod_address = 0x8, 521 .invert = 1, 522 .invert_oclk = 0, 523 .xtal_freq = TDA10046_XTAL_4M, 524 .agc_config = TDA10046_AGC_DEFAULT, 525 .if_freq = TDA10046_FREQ_3617, 526 .tuner_address = 0x63, 527 .request_firmware = philips_tda1004x_request_firmware 528 }; 529 530 /* ------------------------------------------------------------------ 531 * tda 1004x based cards with philips silicon tuner 532 */ 533 534 static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable) 535 { 536 struct tda1004x_state *state = fe->demodulator_priv; 537 538 u8 addr = state->config->i2c_gate; 539 static u8 tda8290_close[] = { 0x21, 0xc0}; 540 static u8 tda8290_open[] = { 0x21, 0x80}; 541 struct i2c_msg tda8290_msg = {.addr = addr,.flags = 0, .len = 2}; 542 if (enable) { 543 tda8290_msg.buf = tda8290_close; 544 } else { 545 tda8290_msg.buf = tda8290_open; 546 } 547 if (i2c_transfer(state->i2c, &tda8290_msg, 1) != 1) { 548 pr_warn("could not access tda8290 I2C gate\n"); 549 return -EIO; 550 } 551 msleep(20); 552 return 0; 553 } 554 555 static int philips_tda827x_tuner_init(struct dvb_frontend *fe) 556 { 557 struct saa7134_dev *dev = fe->dvb->priv; 558 struct tda1004x_state *state = fe->demodulator_priv; 559 560 switch (state->config->antenna_switch) { 561 case 0: 562 break; 563 case 1: 564 pr_debug("setting GPIO21 to 0 (TV antenna?)\n"); 565 saa7134_set_gpio(dev, 21, 0); 566 break; 567 case 2: 568 pr_debug("setting GPIO21 to 1 (Radio antenna?)\n"); 569 saa7134_set_gpio(dev, 21, 1); 570 break; 571 } 572 return 0; 573 } 574 575 static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe) 576 { 577 struct saa7134_dev *dev = fe->dvb->priv; 578 struct tda1004x_state *state = fe->demodulator_priv; 579 580 switch (state->config->antenna_switch) { 581 case 0: 582 break; 583 case 1: 584 pr_debug("setting GPIO21 to 1 (Radio antenna?)\n"); 585 saa7134_set_gpio(dev, 21, 1); 586 break; 587 case 2: 588 pr_debug("setting GPIO21 to 0 (TV antenna?)\n"); 589 saa7134_set_gpio(dev, 21, 0); 590 break; 591 } 592 return 0; 593 } 594 595 static int configure_tda827x_fe(struct saa7134_dev *dev, 596 struct tda1004x_config *cdec_conf, 597 struct tda827x_config *tuner_conf) 598 { 599 struct vb2_dvb_frontend *fe0; 600 601 /* Get the first frontend */ 602 fe0 = vb2_dvb_get_frontend(&dev->frontends, 1); 603 604 if (!fe0) 605 return -EINVAL; 606 607 fe0->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap); 608 if (fe0->dvb.frontend) { 609 if (cdec_conf->i2c_gate) 610 fe0->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; 611 if (dvb_attach(tda827x_attach, fe0->dvb.frontend, 612 cdec_conf->tuner_address, 613 &dev->i2c_adap, tuner_conf)) 614 return 0; 615 616 pr_warn("no tda827x tuner found at addr: %02x\n", 617 cdec_conf->tuner_address); 618 } 619 return -EINVAL; 620 } 621 622 /* ------------------------------------------------------------------ */ 623 624 static struct tda827x_config tda827x_cfg_0 = { 625 .init = philips_tda827x_tuner_init, 626 .sleep = philips_tda827x_tuner_sleep, 627 .config = 0, 628 .switch_addr = 0 629 }; 630 631 static struct tda827x_config tda827x_cfg_1 = { 632 .init = philips_tda827x_tuner_init, 633 .sleep = philips_tda827x_tuner_sleep, 634 .config = 1, 635 .switch_addr = 0x4b 636 }; 637 638 static struct tda827x_config tda827x_cfg_2 = { 639 .init = philips_tda827x_tuner_init, 640 .sleep = philips_tda827x_tuner_sleep, 641 .config = 2, 642 .switch_addr = 0x4b 643 }; 644 645 static struct tda827x_config tda827x_cfg_2_sw42 = { 646 .init = philips_tda827x_tuner_init, 647 .sleep = philips_tda827x_tuner_sleep, 648 .config = 2, 649 .switch_addr = 0x42 650 }; 651 652 /* ------------------------------------------------------------------ */ 653 654 static struct tda1004x_config tda827x_lifeview_config = { 655 .demod_address = 0x08, 656 .invert = 1, 657 .invert_oclk = 0, 658 .xtal_freq = TDA10046_XTAL_16M, 659 .agc_config = TDA10046_AGC_TDA827X, 660 .gpio_config = TDA10046_GP11_I, 661 .if_freq = TDA10046_FREQ_045, 662 .tuner_address = 0x60, 663 .request_firmware = philips_tda1004x_request_firmware 664 }; 665 666 static struct tda1004x_config philips_tiger_config = { 667 .demod_address = 0x08, 668 .invert = 1, 669 .invert_oclk = 0, 670 .xtal_freq = TDA10046_XTAL_16M, 671 .agc_config = TDA10046_AGC_TDA827X, 672 .gpio_config = TDA10046_GP11_I, 673 .if_freq = TDA10046_FREQ_045, 674 .i2c_gate = 0x4b, 675 .tuner_address = 0x61, 676 .antenna_switch= 1, 677 .request_firmware = philips_tda1004x_request_firmware 678 }; 679 680 static struct tda1004x_config cinergy_ht_config = { 681 .demod_address = 0x08, 682 .invert = 1, 683 .invert_oclk = 0, 684 .xtal_freq = TDA10046_XTAL_16M, 685 .agc_config = TDA10046_AGC_TDA827X, 686 .gpio_config = TDA10046_GP01_I, 687 .if_freq = TDA10046_FREQ_045, 688 .i2c_gate = 0x4b, 689 .tuner_address = 0x61, 690 .request_firmware = philips_tda1004x_request_firmware 691 }; 692 693 static struct tda1004x_config cinergy_ht_pci_config = { 694 .demod_address = 0x08, 695 .invert = 1, 696 .invert_oclk = 0, 697 .xtal_freq = TDA10046_XTAL_16M, 698 .agc_config = TDA10046_AGC_TDA827X, 699 .gpio_config = TDA10046_GP01_I, 700 .if_freq = TDA10046_FREQ_045, 701 .i2c_gate = 0x4b, 702 .tuner_address = 0x60, 703 .request_firmware = philips_tda1004x_request_firmware 704 }; 705 706 static struct tda1004x_config philips_tiger_s_config = { 707 .demod_address = 0x08, 708 .invert = 1, 709 .invert_oclk = 0, 710 .xtal_freq = TDA10046_XTAL_16M, 711 .agc_config = TDA10046_AGC_TDA827X, 712 .gpio_config = TDA10046_GP01_I, 713 .if_freq = TDA10046_FREQ_045, 714 .i2c_gate = 0x4b, 715 .tuner_address = 0x61, 716 .antenna_switch= 1, 717 .request_firmware = philips_tda1004x_request_firmware 718 }; 719 720 static struct tda1004x_config pinnacle_pctv_310i_config = { 721 .demod_address = 0x08, 722 .invert = 1, 723 .invert_oclk = 0, 724 .xtal_freq = TDA10046_XTAL_16M, 725 .agc_config = TDA10046_AGC_TDA827X, 726 .gpio_config = TDA10046_GP11_I, 727 .if_freq = TDA10046_FREQ_045, 728 .i2c_gate = 0x4b, 729 .tuner_address = 0x61, 730 .request_firmware = philips_tda1004x_request_firmware 731 }; 732 733 static struct tda1004x_config hauppauge_hvr_1110_config = { 734 .demod_address = 0x08, 735 .invert = 1, 736 .invert_oclk = 0, 737 .xtal_freq = TDA10046_XTAL_16M, 738 .agc_config = TDA10046_AGC_TDA827X, 739 .gpio_config = TDA10046_GP11_I, 740 .if_freq = TDA10046_FREQ_045, 741 .i2c_gate = 0x4b, 742 .tuner_address = 0x61, 743 .request_firmware = philips_tda1004x_request_firmware 744 }; 745 746 static struct tda1004x_config asus_p7131_dual_config = { 747 .demod_address = 0x08, 748 .invert = 1, 749 .invert_oclk = 0, 750 .xtal_freq = TDA10046_XTAL_16M, 751 .agc_config = TDA10046_AGC_TDA827X, 752 .gpio_config = TDA10046_GP11_I, 753 .if_freq = TDA10046_FREQ_045, 754 .i2c_gate = 0x4b, 755 .tuner_address = 0x61, 756 .antenna_switch= 2, 757 .request_firmware = philips_tda1004x_request_firmware 758 }; 759 760 static struct tda1004x_config lifeview_trio_config = { 761 .demod_address = 0x09, 762 .invert = 1, 763 .invert_oclk = 0, 764 .xtal_freq = TDA10046_XTAL_16M, 765 .agc_config = TDA10046_AGC_TDA827X, 766 .gpio_config = TDA10046_GP00_I, 767 .if_freq = TDA10046_FREQ_045, 768 .tuner_address = 0x60, 769 .request_firmware = philips_tda1004x_request_firmware 770 }; 771 772 static struct tda1004x_config tevion_dvbt220rf_config = { 773 .demod_address = 0x08, 774 .invert = 1, 775 .invert_oclk = 0, 776 .xtal_freq = TDA10046_XTAL_16M, 777 .agc_config = TDA10046_AGC_TDA827X, 778 .gpio_config = TDA10046_GP11_I, 779 .if_freq = TDA10046_FREQ_045, 780 .tuner_address = 0x60, 781 .request_firmware = philips_tda1004x_request_firmware 782 }; 783 784 static struct tda1004x_config md8800_dvbt_config = { 785 .demod_address = 0x08, 786 .invert = 1, 787 .invert_oclk = 0, 788 .xtal_freq = TDA10046_XTAL_16M, 789 .agc_config = TDA10046_AGC_TDA827X, 790 .gpio_config = TDA10046_GP01_I, 791 .if_freq = TDA10046_FREQ_045, 792 .i2c_gate = 0x4b, 793 .tuner_address = 0x60, 794 .request_firmware = philips_tda1004x_request_firmware 795 }; 796 797 static struct tda1004x_config asus_p7131_4871_config = { 798 .demod_address = 0x08, 799 .invert = 1, 800 .invert_oclk = 0, 801 .xtal_freq = TDA10046_XTAL_16M, 802 .agc_config = TDA10046_AGC_TDA827X, 803 .gpio_config = TDA10046_GP01_I, 804 .if_freq = TDA10046_FREQ_045, 805 .i2c_gate = 0x4b, 806 .tuner_address = 0x61, 807 .antenna_switch= 2, 808 .request_firmware = philips_tda1004x_request_firmware 809 }; 810 811 static struct tda1004x_config asus_p7131_hybrid_lna_config = { 812 .demod_address = 0x08, 813 .invert = 1, 814 .invert_oclk = 0, 815 .xtal_freq = TDA10046_XTAL_16M, 816 .agc_config = TDA10046_AGC_TDA827X, 817 .gpio_config = TDA10046_GP11_I, 818 .if_freq = TDA10046_FREQ_045, 819 .i2c_gate = 0x4b, 820 .tuner_address = 0x61, 821 .antenna_switch= 2, 822 .request_firmware = philips_tda1004x_request_firmware 823 }; 824 825 static struct tda1004x_config kworld_dvb_t_210_config = { 826 .demod_address = 0x08, 827 .invert = 1, 828 .invert_oclk = 0, 829 .xtal_freq = TDA10046_XTAL_16M, 830 .agc_config = TDA10046_AGC_TDA827X, 831 .gpio_config = TDA10046_GP11_I, 832 .if_freq = TDA10046_FREQ_045, 833 .i2c_gate = 0x4b, 834 .tuner_address = 0x61, 835 .antenna_switch= 1, 836 .request_firmware = philips_tda1004x_request_firmware 837 }; 838 839 static struct tda1004x_config avermedia_super_007_config = { 840 .demod_address = 0x08, 841 .invert = 1, 842 .invert_oclk = 0, 843 .xtal_freq = TDA10046_XTAL_16M, 844 .agc_config = TDA10046_AGC_TDA827X, 845 .gpio_config = TDA10046_GP01_I, 846 .if_freq = TDA10046_FREQ_045, 847 .i2c_gate = 0x4b, 848 .tuner_address = 0x60, 849 .antenna_switch= 1, 850 .request_firmware = philips_tda1004x_request_firmware 851 }; 852 853 static struct tda1004x_config twinhan_dtv_dvb_3056_config = { 854 .demod_address = 0x08, 855 .invert = 1, 856 .invert_oclk = 0, 857 .xtal_freq = TDA10046_XTAL_16M, 858 .agc_config = TDA10046_AGC_TDA827X, 859 .gpio_config = TDA10046_GP01_I, 860 .if_freq = TDA10046_FREQ_045, 861 .i2c_gate = 0x42, 862 .tuner_address = 0x61, 863 .antenna_switch = 1, 864 .request_firmware = philips_tda1004x_request_firmware 865 }; 866 867 static struct tda1004x_config asus_tiger_3in1_config = { 868 .demod_address = 0x0b, 869 .invert = 1, 870 .invert_oclk = 0, 871 .xtal_freq = TDA10046_XTAL_16M, 872 .agc_config = TDA10046_AGC_TDA827X, 873 .gpio_config = TDA10046_GP11_I, 874 .if_freq = TDA10046_FREQ_045, 875 .i2c_gate = 0x4b, 876 .tuner_address = 0x61, 877 .antenna_switch = 1, 878 .request_firmware = philips_tda1004x_request_firmware 879 }; 880 881 static struct tda1004x_config asus_ps3_100_config = { 882 .demod_address = 0x0b, 883 .invert = 1, 884 .invert_oclk = 0, 885 .xtal_freq = TDA10046_XTAL_16M, 886 .agc_config = TDA10046_AGC_TDA827X, 887 .gpio_config = TDA10046_GP11_I, 888 .if_freq = TDA10046_FREQ_045, 889 .i2c_gate = 0x4b, 890 .tuner_address = 0x61, 891 .antenna_switch = 1, 892 .request_firmware = philips_tda1004x_request_firmware 893 }; 894 895 /* ------------------------------------------------------------------ 896 * special case: this card uses saa713x GPIO22 for the mode switch 897 */ 898 899 static int ads_duo_tuner_init(struct dvb_frontend *fe) 900 { 901 struct saa7134_dev *dev = fe->dvb->priv; 902 philips_tda827x_tuner_init(fe); 903 /* route TDA8275a AGC input to the channel decoder */ 904 saa7134_set_gpio(dev, 22, 1); 905 return 0; 906 } 907 908 static int ads_duo_tuner_sleep(struct dvb_frontend *fe) 909 { 910 struct saa7134_dev *dev = fe->dvb->priv; 911 /* route TDA8275a AGC input to the analog IF chip*/ 912 saa7134_set_gpio(dev, 22, 0); 913 philips_tda827x_tuner_sleep(fe); 914 return 0; 915 } 916 917 static struct tda827x_config ads_duo_cfg = { 918 .init = ads_duo_tuner_init, 919 .sleep = ads_duo_tuner_sleep, 920 .config = 0 921 }; 922 923 static struct tda1004x_config ads_tech_duo_config = { 924 .demod_address = 0x08, 925 .invert = 1, 926 .invert_oclk = 0, 927 .xtal_freq = TDA10046_XTAL_16M, 928 .agc_config = TDA10046_AGC_TDA827X, 929 .gpio_config = TDA10046_GP00_I, 930 .if_freq = TDA10046_FREQ_045, 931 .tuner_address = 0x61, 932 .request_firmware = philips_tda1004x_request_firmware 933 }; 934 935 static struct zl10353_config behold_h6_config = { 936 .demod_address = 0x1e>>1, 937 .no_tuner = 1, 938 .parallel_ts = 1, 939 .disable_i2c_gate_ctrl = 1, 940 }; 941 942 static struct xc5000_config behold_x7_tunerconfig = { 943 .i2c_address = 0xc2>>1, 944 .if_khz = 4560, 945 .radio_input = XC5000_RADIO_FM1, 946 }; 947 948 static struct zl10353_config behold_x7_config = { 949 .demod_address = 0x1e>>1, 950 .if2 = 45600, 951 .no_tuner = 1, 952 .parallel_ts = 1, 953 .disable_i2c_gate_ctrl = 1, 954 }; 955 956 static struct zl10353_config videomate_t750_zl10353_config = { 957 .demod_address = 0x0f, 958 .no_tuner = 1, 959 .parallel_ts = 1, 960 .disable_i2c_gate_ctrl = 1, 961 }; 962 963 static struct qt1010_config videomate_t750_qt1010_config = { 964 .i2c_address = 0x62 965 }; 966 967 968 /* ================================================================== 969 * tda10086 based DVB-S cards, helper functions 970 */ 971 972 static struct tda10086_config flydvbs = { 973 .demod_address = 0x0e, 974 .invert = 0, 975 .diseqc_tone = 0, 976 .xtal_freq = TDA10086_XTAL_16M, 977 }; 978 979 static struct tda10086_config sd1878_4m = { 980 .demod_address = 0x0e, 981 .invert = 0, 982 .diseqc_tone = 0, 983 .xtal_freq = TDA10086_XTAL_4M, 984 }; 985 986 /* ------------------------------------------------------------------ 987 * special case: lnb supply is connected to the gated i2c 988 */ 989 990 static int md8800_set_voltage(struct dvb_frontend *fe, 991 enum fe_sec_voltage voltage) 992 { 993 int res = -EIO; 994 struct saa7134_dev *dev = fe->dvb->priv; 995 if (fe->ops.i2c_gate_ctrl) { 996 fe->ops.i2c_gate_ctrl(fe, 1); 997 if (dev->original_set_voltage) 998 res = dev->original_set_voltage(fe, voltage); 999 fe->ops.i2c_gate_ctrl(fe, 0); 1000 } 1001 return res; 1002 }; 1003 1004 static int md8800_set_high_voltage(struct dvb_frontend *fe, long arg) 1005 { 1006 int res = -EIO; 1007 struct saa7134_dev *dev = fe->dvb->priv; 1008 if (fe->ops.i2c_gate_ctrl) { 1009 fe->ops.i2c_gate_ctrl(fe, 1); 1010 if (dev->original_set_high_voltage) 1011 res = dev->original_set_high_voltage(fe, arg); 1012 fe->ops.i2c_gate_ctrl(fe, 0); 1013 } 1014 return res; 1015 }; 1016 1017 static int md8800_set_voltage2(struct dvb_frontend *fe, 1018 enum fe_sec_voltage voltage) 1019 { 1020 struct saa7134_dev *dev = fe->dvb->priv; 1021 u8 wbuf[2] = { 0x1f, 00 }; 1022 u8 rbuf; 1023 struct i2c_msg msg[] = { { .addr = 0x08, .flags = 0, .buf = wbuf, .len = 1 }, 1024 { .addr = 0x08, .flags = I2C_M_RD, .buf = &rbuf, .len = 1 } }; 1025 1026 if (i2c_transfer(&dev->i2c_adap, msg, 2) != 2) 1027 return -EIO; 1028 /* NOTE: this assumes that gpo1 is used, it might be bit 5 (gpo2) */ 1029 if (voltage == SEC_VOLTAGE_18) 1030 wbuf[1] = rbuf | 0x10; 1031 else 1032 wbuf[1] = rbuf & 0xef; 1033 msg[0].len = 2; 1034 i2c_transfer(&dev->i2c_adap, msg, 1); 1035 return 0; 1036 } 1037 1038 static int md8800_set_high_voltage2(struct dvb_frontend *fe, long arg) 1039 { 1040 pr_warn("%s: sorry can't set high LNB supply voltage from here\n", 1041 __func__); 1042 return -EIO; 1043 } 1044 1045 /* ================================================================== 1046 * nxt200x based ATSC cards, helper functions 1047 */ 1048 1049 static struct nxt200x_config avertvhda180 = { 1050 .demod_address = 0x0a, 1051 }; 1052 1053 static struct nxt200x_config kworldatsc110 = { 1054 .demod_address = 0x0a, 1055 }; 1056 1057 /* ------------------------------------------------------------------ */ 1058 1059 static struct mt312_config avertv_a700_mt312 = { 1060 .demod_address = 0x0e, 1061 .voltage_inverted = 1, 1062 }; 1063 1064 static struct zl10036_config avertv_a700_tuner = { 1065 .tuner_address = 0x60, 1066 }; 1067 1068 static struct mt312_config zl10313_compro_s350_config = { 1069 .demod_address = 0x0e, 1070 }; 1071 1072 static struct mt312_config zl10313_avermedia_a706_config = { 1073 .demod_address = 0x0e, 1074 }; 1075 1076 static struct lgdt3305_config hcw_lgdt3305_config = { 1077 .i2c_addr = 0x0e, 1078 .mpeg_mode = LGDT3305_MPEG_SERIAL, 1079 .tpclk_edge = LGDT3305_TPCLK_RISING_EDGE, 1080 .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, 1081 .deny_i2c_rptr = 1, 1082 .spectral_inversion = 1, 1083 .qam_if_khz = 4000, 1084 .vsb_if_khz = 3250, 1085 }; 1086 1087 static struct tda10048_config hcw_tda10048_config = { 1088 .demod_address = 0x10 >> 1, 1089 .output_mode = TDA10048_SERIAL_OUTPUT, 1090 .fwbulkwritelen = TDA10048_BULKWRITE_200, 1091 .inversion = TDA10048_INVERSION_ON, 1092 .dtv6_if_freq_khz = TDA10048_IF_3300, 1093 .dtv7_if_freq_khz = TDA10048_IF_3500, 1094 .dtv8_if_freq_khz = TDA10048_IF_4000, 1095 .clk_freq_khz = TDA10048_CLK_16000, 1096 .disable_gate_access = 1, 1097 }; 1098 1099 static struct tda18271_std_map hauppauge_tda18271_std_map = { 1100 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4, 1101 .if_lvl = 1, .rfagc_top = 0x58, }, 1102 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5, 1103 .if_lvl = 1, .rfagc_top = 0x58, }, 1104 }; 1105 1106 static struct tda18271_config hcw_tda18271_config = { 1107 .std_map = &hauppauge_tda18271_std_map, 1108 .gate = TDA18271_GATE_ANALOG, 1109 .config = 3, 1110 .output_opt = TDA18271_OUTPUT_LT_OFF, 1111 }; 1112 1113 static struct tda829x_config tda829x_no_probe = { 1114 .probe_tuner = TDA829X_DONT_PROBE, 1115 }; 1116 1117 static struct tda10048_config zolid_tda10048_config = { 1118 .demod_address = 0x10 >> 1, 1119 .output_mode = TDA10048_PARALLEL_OUTPUT, 1120 .fwbulkwritelen = TDA10048_BULKWRITE_200, 1121 .inversion = TDA10048_INVERSION_ON, 1122 .dtv6_if_freq_khz = TDA10048_IF_3300, 1123 .dtv7_if_freq_khz = TDA10048_IF_3500, 1124 .dtv8_if_freq_khz = TDA10048_IF_4000, 1125 .clk_freq_khz = TDA10048_CLK_16000, 1126 .disable_gate_access = 1, 1127 }; 1128 1129 static struct tda18271_config zolid_tda18271_config = { 1130 .gate = TDA18271_GATE_ANALOG, 1131 }; 1132 1133 static struct tda10048_config dtv1000s_tda10048_config = { 1134 .demod_address = 0x10 >> 1, 1135 .output_mode = TDA10048_PARALLEL_OUTPUT, 1136 .fwbulkwritelen = TDA10048_BULKWRITE_200, 1137 .inversion = TDA10048_INVERSION_ON, 1138 .dtv6_if_freq_khz = TDA10048_IF_3300, 1139 .dtv7_if_freq_khz = TDA10048_IF_3800, 1140 .dtv8_if_freq_khz = TDA10048_IF_4300, 1141 .clk_freq_khz = TDA10048_CLK_16000, 1142 .disable_gate_access = 1, 1143 }; 1144 1145 static struct tda18271_std_map dtv1000s_tda18271_std_map = { 1146 .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, 1147 .if_lvl = 1, .rfagc_top = 0x37, }, 1148 .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, 1149 .if_lvl = 1, .rfagc_top = 0x37, }, 1150 .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, 1151 .if_lvl = 1, .rfagc_top = 0x37, }, 1152 }; 1153 1154 static struct tda18271_config dtv1000s_tda18271_config = { 1155 .std_map = &dtv1000s_tda18271_std_map, 1156 .gate = TDA18271_GATE_ANALOG, 1157 }; 1158 1159 static struct lgs8gxx_config prohdtv_pro2_lgs8g75_config = { 1160 .prod = LGS8GXX_PROD_LGS8G75, 1161 .demod_address = 0x1d, 1162 .serial_ts = 0, 1163 .ts_clk_pol = 1, 1164 .ts_clk_gated = 0, 1165 .if_clk_freq = 30400, /* 30.4 MHz */ 1166 .if_freq = 4000, /* 4.00 MHz */ 1167 .if_neg_center = 0, 1168 .ext_adc = 0, 1169 .adc_signed = 1, 1170 .adc_vpp = 3, /* 2.0 Vpp */ 1171 .if_neg_edge = 1, 1172 }; 1173 1174 static struct tda18271_config prohdtv_pro2_tda18271_config = { 1175 .gate = TDA18271_GATE_ANALOG, 1176 .output_opt = TDA18271_OUTPUT_LT_OFF, 1177 }; 1178 1179 static struct tda18271_std_map kworld_tda18271_std_map = { 1180 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 3, 1181 .if_lvl = 6, .rfagc_top = 0x37 }, 1182 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, 1183 .if_lvl = 6, .rfagc_top = 0x37 }, 1184 }; 1185 1186 static struct tda18271_config kworld_pc150u_tda18271_config = { 1187 .std_map = &kworld_tda18271_std_map, 1188 .gate = TDA18271_GATE_ANALOG, 1189 .output_opt = TDA18271_OUTPUT_LT_OFF, 1190 .config = 3, /* Use tuner callback for AGC */ 1191 .rf_cal_on_startup = 1 1192 }; 1193 1194 static struct s5h1411_config kworld_s5h1411_config = { 1195 .output_mode = S5H1411_PARALLEL_OUTPUT, 1196 .gpio = S5H1411_GPIO_OFF, 1197 .qam_if = S5H1411_IF_4000, 1198 .vsb_if = S5H1411_IF_3250, 1199 .inversion = S5H1411_INVERSION_ON, 1200 .status_mode = S5H1411_DEMODLOCKING, 1201 .mpeg_timing = 1202 S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, 1203 }; 1204 1205 1206 /* ================================================================== 1207 * Core code 1208 */ 1209 1210 static int dvb_init(struct saa7134_dev *dev) 1211 { 1212 int ret; 1213 int attach_xc3028 = 0; 1214 struct vb2_dvb_frontend *fe0; 1215 struct vb2_queue *q; 1216 1217 /* FIXME: add support for multi-frontend */ 1218 mutex_init(&dev->frontends.lock); 1219 INIT_LIST_HEAD(&dev->frontends.felist); 1220 1221 pr_info("%s() allocating 1 frontend\n", __func__); 1222 fe0 = vb2_dvb_alloc_frontend(&dev->frontends, 1); 1223 if (!fe0) { 1224 pr_err("%s() failed to alloc\n", __func__); 1225 return -ENOMEM; 1226 } 1227 1228 /* init struct vb2_dvb */ 1229 dev->ts.nr_bufs = 32; 1230 dev->ts.nr_packets = 32*4; 1231 fe0->dvb.name = dev->name; 1232 q = &fe0->dvb.dvbq; 1233 q->type = V4L2_BUF_TYPE_VIDEO_CAPTURE; 1234 q->io_modes = VB2_MMAP | VB2_READ; 1235 q->drv_priv = &dev->ts_q; 1236 q->ops = &saa7134_ts_qops; 1237 q->mem_ops = &vb2_dma_sg_memops; 1238 q->buf_struct_size = sizeof(struct saa7134_buf); 1239 q->timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC; 1240 q->lock = &dev->lock; 1241 ret = vb2_queue_init(q); 1242 if (ret) { 1243 vb2_dvb_dealloc_frontends(&dev->frontends); 1244 return ret; 1245 } 1246 1247 switch (dev->board) { 1248 case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL: 1249 pr_debug("pinnacle 300i dvb setup\n"); 1250 fe0->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i, 1251 &dev->i2c_adap); 1252 if (fe0->dvb.frontend) { 1253 fe0->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params; 1254 } 1255 break; 1256 case SAA7134_BOARD_AVERMEDIA_777: 1257 case SAA7134_BOARD_AVERMEDIA_A16AR: 1258 pr_debug("avertv 777 dvb setup\n"); 1259 fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777, 1260 &dev->i2c_adap); 1261 if (fe0->dvb.frontend) { 1262 dvb_attach(simple_tuner_attach, fe0->dvb.frontend, 1263 &dev->i2c_adap, 0x61, 1264 TUNER_PHILIPS_TD1316); 1265 } 1266 break; 1267 case SAA7134_BOARD_AVERMEDIA_A16D: 1268 pr_debug("AverMedia A16D dvb setup\n"); 1269 fe0->dvb.frontend = dvb_attach(mt352_attach, 1270 &avermedia_xc3028_mt352_dev, 1271 &dev->i2c_adap); 1272 attach_xc3028 = 1; 1273 break; 1274 case SAA7134_BOARD_MD7134: 1275 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1276 &medion_cardbus, 1277 &dev->i2c_adap); 1278 if (fe0->dvb.frontend) { 1279 dvb_attach(simple_tuner_attach, fe0->dvb.frontend, 1280 &dev->i2c_adap, medion_cardbus.tuner_address, 1281 TUNER_PHILIPS_FMD1216ME_MK3); 1282 } 1283 break; 1284 case SAA7134_BOARD_PHILIPS_TOUGH: 1285 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1286 &philips_tu1216_60_config, 1287 &dev->i2c_adap); 1288 if (fe0->dvb.frontend) { 1289 fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; 1290 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; 1291 } 1292 break; 1293 case SAA7134_BOARD_FLYDVBTDUO: 1294 case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS: 1295 if (configure_tda827x_fe(dev, &tda827x_lifeview_config, 1296 &tda827x_cfg_0) < 0) 1297 goto detach_frontend; 1298 break; 1299 case SAA7134_BOARD_PHILIPS_EUROPA: 1300 case SAA7134_BOARD_VIDEOMATE_DVBT_300: 1301 case SAA7134_BOARD_ASUS_EUROPA_HYBRID: 1302 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1303 &philips_europa_config, 1304 &dev->i2c_adap); 1305 if (fe0->dvb.frontend) { 1306 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; 1307 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; 1308 fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; 1309 fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; 1310 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; 1311 } 1312 break; 1313 case SAA7134_BOARD_TECHNOTREND_BUDGET_T3000: 1314 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1315 &technotrend_budget_t3000_config, 1316 &dev->i2c_adap); 1317 if (fe0->dvb.frontend) { 1318 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; 1319 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; 1320 fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; 1321 fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; 1322 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; 1323 } 1324 break; 1325 case SAA7134_BOARD_VIDEOMATE_DVBT_200: 1326 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1327 &philips_tu1216_61_config, 1328 &dev->i2c_adap); 1329 if (fe0->dvb.frontend) { 1330 fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; 1331 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; 1332 } 1333 break; 1334 case SAA7134_BOARD_KWORLD_DVBT_210: 1335 if (configure_tda827x_fe(dev, &kworld_dvb_t_210_config, 1336 &tda827x_cfg_2) < 0) 1337 goto detach_frontend; 1338 break; 1339 case SAA7134_BOARD_HAUPPAUGE_HVR1120: 1340 fe0->dvb.frontend = dvb_attach(tda10048_attach, 1341 &hcw_tda10048_config, 1342 &dev->i2c_adap); 1343 if (fe0->dvb.frontend != NULL) { 1344 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1345 &dev->i2c_adap, 0x4b, 1346 &tda829x_no_probe); 1347 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1348 0x60, &dev->i2c_adap, 1349 &hcw_tda18271_config); 1350 } 1351 break; 1352 case SAA7134_BOARD_PHILIPS_TIGER: 1353 if (configure_tda827x_fe(dev, &philips_tiger_config, 1354 &tda827x_cfg_0) < 0) 1355 goto detach_frontend; 1356 break; 1357 case SAA7134_BOARD_PINNACLE_PCTV_310i: 1358 if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config, 1359 &tda827x_cfg_1) < 0) 1360 goto detach_frontend; 1361 break; 1362 case SAA7134_BOARD_HAUPPAUGE_HVR1110: 1363 if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config, 1364 &tda827x_cfg_1) < 0) 1365 goto detach_frontend; 1366 break; 1367 case SAA7134_BOARD_HAUPPAUGE_HVR1150: 1368 fe0->dvb.frontend = dvb_attach(lgdt3305_attach, 1369 &hcw_lgdt3305_config, 1370 &dev->i2c_adap); 1371 if (fe0->dvb.frontend) { 1372 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1373 &dev->i2c_adap, 0x4b, 1374 &tda829x_no_probe); 1375 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1376 0x60, &dev->i2c_adap, 1377 &hcw_tda18271_config); 1378 } 1379 break; 1380 case SAA7134_BOARD_ASUSTeK_P7131_DUAL: 1381 if (configure_tda827x_fe(dev, &asus_p7131_dual_config, 1382 &tda827x_cfg_0) < 0) 1383 goto detach_frontend; 1384 break; 1385 case SAA7134_BOARD_FLYDVBT_LR301: 1386 if (configure_tda827x_fe(dev, &tda827x_lifeview_config, 1387 &tda827x_cfg_0) < 0) 1388 goto detach_frontend; 1389 break; 1390 case SAA7134_BOARD_FLYDVB_TRIO: 1391 if (!use_frontend) { /* terrestrial */ 1392 if (configure_tda827x_fe(dev, &lifeview_trio_config, 1393 &tda827x_cfg_0) < 0) 1394 goto detach_frontend; 1395 } else { /* satellite */ 1396 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); 1397 if (fe0->dvb.frontend) { 1398 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x63, 1399 &dev->i2c_adap, 0) == NULL) { 1400 pr_warn("%s: Lifeview Trio, No tda826x found!\n", 1401 __func__); 1402 goto detach_frontend; 1403 } 1404 if (dvb_attach(isl6421_attach, fe0->dvb.frontend, 1405 &dev->i2c_adap, 1406 0x08, 0, 0, false) == NULL) { 1407 pr_warn("%s: Lifeview Trio, No ISL6421 found!\n", 1408 __func__); 1409 goto detach_frontend; 1410 } 1411 } 1412 } 1413 break; 1414 case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331: 1415 case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS: 1416 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1417 &ads_tech_duo_config, 1418 &dev->i2c_adap); 1419 if (fe0->dvb.frontend) { 1420 if (dvb_attach(tda827x_attach,fe0->dvb.frontend, 1421 ads_tech_duo_config.tuner_address, &dev->i2c_adap, 1422 &ads_duo_cfg) == NULL) { 1423 pr_warn("no tda827x tuner found at addr: %02x\n", 1424 ads_tech_duo_config.tuner_address); 1425 goto detach_frontend; 1426 } 1427 } else 1428 pr_warn("failed to attach tda10046\n"); 1429 break; 1430 case SAA7134_BOARD_TEVION_DVBT_220RF: 1431 if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config, 1432 &tda827x_cfg_0) < 0) 1433 goto detach_frontend; 1434 break; 1435 case SAA7134_BOARD_MEDION_MD8800_QUADRO: 1436 if (!use_frontend) { /* terrestrial */ 1437 if (configure_tda827x_fe(dev, &md8800_dvbt_config, 1438 &tda827x_cfg_0) < 0) 1439 goto detach_frontend; 1440 } else { /* satellite */ 1441 fe0->dvb.frontend = dvb_attach(tda10086_attach, 1442 &flydvbs, &dev->i2c_adap); 1443 if (fe0->dvb.frontend) { 1444 struct dvb_frontend *fe = fe0->dvb.frontend; 1445 u8 dev_id = dev->eedata[2]; 1446 u8 data = 0xc4; 1447 struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1}; 1448 1449 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 1450 0x60, &dev->i2c_adap, 0) == NULL) { 1451 pr_warn("%s: Medion Quadro, no tda826x " 1452 "found !\n", __func__); 1453 goto detach_frontend; 1454 } 1455 if (dev_id != 0x08) { 1456 /* we need to open the i2c gate (we know it exists) */ 1457 fe->ops.i2c_gate_ctrl(fe, 1); 1458 if (dvb_attach(isl6405_attach, fe, 1459 &dev->i2c_adap, 0x08, 0, 0) == NULL) { 1460 pr_warn("%s: Medion Quadro, no ISL6405 " 1461 "found !\n", __func__); 1462 goto detach_frontend; 1463 } 1464 if (dev_id == 0x07) { 1465 /* fire up the 2nd section of the LNB supply since 1466 we can't do this from the other section */ 1467 msg.buf = &data; 1468 i2c_transfer(&dev->i2c_adap, &msg, 1); 1469 } 1470 fe->ops.i2c_gate_ctrl(fe, 0); 1471 dev->original_set_voltage = fe->ops.set_voltage; 1472 fe->ops.set_voltage = md8800_set_voltage; 1473 dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage; 1474 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage; 1475 } else { 1476 fe->ops.set_voltage = md8800_set_voltage2; 1477 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage2; 1478 } 1479 } 1480 } 1481 break; 1482 case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180: 1483 fe0->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180, 1484 &dev->i2c_adap); 1485 if (fe0->dvb.frontend) 1486 dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61, 1487 NULL, DVB_PLL_TDHU2); 1488 break; 1489 case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI: 1490 case SAA7134_BOARD_KWORLD_ATSC110: 1491 fe0->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110, 1492 &dev->i2c_adap); 1493 if (fe0->dvb.frontend) 1494 dvb_attach(simple_tuner_attach, fe0->dvb.frontend, 1495 &dev->i2c_adap, 0x61, 1496 TUNER_PHILIPS_TUV1236D); 1497 break; 1498 case SAA7134_BOARD_KWORLD_PC150U: 1499 saa7134_set_gpio(dev, 18, 1); /* Switch to digital mode */ 1500 saa7134_tuner_callback(dev, 0, 1501 TDA18271_CALLBACK_CMD_AGC_ENABLE, 1); 1502 fe0->dvb.frontend = dvb_attach(s5h1411_attach, 1503 &kworld_s5h1411_config, 1504 &dev->i2c_adap); 1505 if (fe0->dvb.frontend != NULL) { 1506 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1507 &dev->i2c_adap, 0x4b, 1508 &tda829x_no_probe); 1509 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1510 0x60, &dev->i2c_adap, 1511 &kworld_pc150u_tda18271_config); 1512 } 1513 break; 1514 case SAA7134_BOARD_FLYDVBS_LR300: 1515 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, 1516 &dev->i2c_adap); 1517 if (fe0->dvb.frontend) { 1518 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60, 1519 &dev->i2c_adap, 0) == NULL) { 1520 pr_warn("%s: No tda826x found!\n", __func__); 1521 goto detach_frontend; 1522 } 1523 if (dvb_attach(isl6421_attach, fe0->dvb.frontend, 1524 &dev->i2c_adap, 1525 0x08, 0, 0, false) == NULL) { 1526 pr_warn("%s: No ISL6421 found!\n", __func__); 1527 goto detach_frontend; 1528 } 1529 } 1530 break; 1531 case SAA7134_BOARD_ASUS_EUROPA2_HYBRID: 1532 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1533 &medion_cardbus, 1534 &dev->i2c_adap); 1535 if (fe0->dvb.frontend) { 1536 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; 1537 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; 1538 1539 dvb_attach(simple_tuner_attach, fe0->dvb.frontend, 1540 &dev->i2c_adap, medion_cardbus.tuner_address, 1541 TUNER_PHILIPS_FMD1216ME_MK3); 1542 } 1543 break; 1544 case SAA7134_BOARD_VIDEOMATE_DVBT_200A: 1545 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1546 &philips_europa_config, 1547 &dev->i2c_adap); 1548 if (fe0->dvb.frontend) { 1549 fe0->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init; 1550 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; 1551 } 1552 break; 1553 case SAA7134_BOARD_CINERGY_HT_PCMCIA: 1554 if (configure_tda827x_fe(dev, &cinergy_ht_config, 1555 &tda827x_cfg_0) < 0) 1556 goto detach_frontend; 1557 break; 1558 case SAA7134_BOARD_CINERGY_HT_PCI: 1559 if (configure_tda827x_fe(dev, &cinergy_ht_pci_config, 1560 &tda827x_cfg_0) < 0) 1561 goto detach_frontend; 1562 break; 1563 case SAA7134_BOARD_PHILIPS_TIGER_S: 1564 if (configure_tda827x_fe(dev, &philips_tiger_s_config, 1565 &tda827x_cfg_2) < 0) 1566 goto detach_frontend; 1567 break; 1568 case SAA7134_BOARD_ASUS_P7131_4871: 1569 if (configure_tda827x_fe(dev, &asus_p7131_4871_config, 1570 &tda827x_cfg_2) < 0) 1571 goto detach_frontend; 1572 break; 1573 case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA: 1574 if (configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config, 1575 &tda827x_cfg_2) < 0) 1576 goto detach_frontend; 1577 break; 1578 case SAA7134_BOARD_AVERMEDIA_SUPER_007: 1579 if (configure_tda827x_fe(dev, &avermedia_super_007_config, 1580 &tda827x_cfg_0) < 0) 1581 goto detach_frontend; 1582 break; 1583 case SAA7134_BOARD_TWINHAN_DTV_DVB_3056: 1584 if (configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config, 1585 &tda827x_cfg_2_sw42) < 0) 1586 goto detach_frontend; 1587 break; 1588 case SAA7134_BOARD_PHILIPS_SNAKE: 1589 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, 1590 &dev->i2c_adap); 1591 if (fe0->dvb.frontend) { 1592 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60, 1593 &dev->i2c_adap, 0) == NULL) { 1594 pr_warn("%s: No tda826x found!\n", __func__); 1595 goto detach_frontend; 1596 } 1597 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, 1598 &dev->i2c_adap, 0, 0) == NULL) { 1599 pr_warn("%s: No lnbp21 found!\n", __func__); 1600 goto detach_frontend; 1601 } 1602 } 1603 break; 1604 case SAA7134_BOARD_CREATIX_CTX953: 1605 if (configure_tda827x_fe(dev, &md8800_dvbt_config, 1606 &tda827x_cfg_0) < 0) 1607 goto detach_frontend; 1608 break; 1609 case SAA7134_BOARD_MSI_TVANYWHERE_AD11: 1610 if (configure_tda827x_fe(dev, &philips_tiger_s_config, 1611 &tda827x_cfg_2) < 0) 1612 goto detach_frontend; 1613 break; 1614 case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: 1615 pr_debug("AverMedia E506R dvb setup\n"); 1616 saa7134_set_gpio(dev, 25, 0); 1617 msleep(10); 1618 saa7134_set_gpio(dev, 25, 1); 1619 fe0->dvb.frontend = dvb_attach(mt352_attach, 1620 &avermedia_xc3028_mt352_dev, 1621 &dev->i2c_adap); 1622 attach_xc3028 = 1; 1623 break; 1624 case SAA7134_BOARD_MD7134_BRIDGE_2: 1625 fe0->dvb.frontend = dvb_attach(tda10086_attach, 1626 &sd1878_4m, &dev->i2c_adap); 1627 if (fe0->dvb.frontend) { 1628 struct dvb_frontend *fe; 1629 if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60, 1630 &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) { 1631 pr_warn("%s: MD7134 DVB-S, no SD1878 " 1632 "found !\n", __func__); 1633 goto detach_frontend; 1634 } 1635 /* we need to open the i2c gate (we know it exists) */ 1636 fe = fe0->dvb.frontend; 1637 fe->ops.i2c_gate_ctrl(fe, 1); 1638 if (dvb_attach(isl6405_attach, fe, 1639 &dev->i2c_adap, 0x08, 0, 0) == NULL) { 1640 pr_warn("%s: MD7134 DVB-S, no ISL6405 " 1641 "found !\n", __func__); 1642 goto detach_frontend; 1643 } 1644 fe->ops.i2c_gate_ctrl(fe, 0); 1645 dev->original_set_voltage = fe->ops.set_voltage; 1646 fe->ops.set_voltage = md8800_set_voltage; 1647 dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage; 1648 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage; 1649 } 1650 break; 1651 case SAA7134_BOARD_AVERMEDIA_M103: 1652 saa7134_set_gpio(dev, 25, 0); 1653 msleep(10); 1654 saa7134_set_gpio(dev, 25, 1); 1655 fe0->dvb.frontend = dvb_attach(mt352_attach, 1656 &avermedia_xc3028_mt352_dev, 1657 &dev->i2c_adap); 1658 attach_xc3028 = 1; 1659 break; 1660 case SAA7134_BOARD_ASUSTeK_TIGER_3IN1: 1661 if (!use_frontend) { /* terrestrial */ 1662 if (configure_tda827x_fe(dev, &asus_tiger_3in1_config, 1663 &tda827x_cfg_2) < 0) 1664 goto detach_frontend; 1665 } else { /* satellite */ 1666 fe0->dvb.frontend = dvb_attach(tda10086_attach, 1667 &flydvbs, &dev->i2c_adap); 1668 if (fe0->dvb.frontend) { 1669 if (dvb_attach(tda826x_attach, 1670 fe0->dvb.frontend, 0x60, 1671 &dev->i2c_adap, 0) == NULL) { 1672 pr_warn("%s: Asus Tiger 3in1, no " 1673 "tda826x found!\n", __func__); 1674 goto detach_frontend; 1675 } 1676 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, 1677 &dev->i2c_adap, 0, 0) == NULL) { 1678 pr_warn("%s: Asus Tiger 3in1, no lnbp21" 1679 " found!\n", __func__); 1680 goto detach_frontend; 1681 } 1682 } 1683 } 1684 break; 1685 case SAA7134_BOARD_ASUSTeK_PS3_100: 1686 if (!use_frontend) { /* terrestrial */ 1687 if (configure_tda827x_fe(dev, &asus_ps3_100_config, 1688 &tda827x_cfg_2) < 0) 1689 goto detach_frontend; 1690 } else { /* satellite */ 1691 fe0->dvb.frontend = dvb_attach(tda10086_attach, 1692 &flydvbs, &dev->i2c_adap); 1693 if (fe0->dvb.frontend) { 1694 if (dvb_attach(tda826x_attach, 1695 fe0->dvb.frontend, 0x60, 1696 &dev->i2c_adap, 0) == NULL) { 1697 pr_warn("%s: Asus My Cinema PS3-100, no " 1698 "tda826x found!\n", __func__); 1699 goto detach_frontend; 1700 } 1701 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, 1702 &dev->i2c_adap, 0, 0) == NULL) { 1703 pr_warn("%s: Asus My Cinema PS3-100, no lnbp21" 1704 " found!\n", __func__); 1705 goto detach_frontend; 1706 } 1707 } 1708 } 1709 break; 1710 case SAA7134_BOARD_ASUSTeK_TIGER: 1711 if (configure_tda827x_fe(dev, &philips_tiger_config, 1712 &tda827x_cfg_0) < 0) 1713 goto detach_frontend; 1714 break; 1715 case SAA7134_BOARD_BEHOLD_H6: 1716 fe0->dvb.frontend = dvb_attach(zl10353_attach, 1717 &behold_h6_config, 1718 &dev->i2c_adap); 1719 if (fe0->dvb.frontend) { 1720 dvb_attach(simple_tuner_attach, fe0->dvb.frontend, 1721 &dev->i2c_adap, 0x61, 1722 TUNER_PHILIPS_FMD1216MEX_MK3); 1723 } 1724 break; 1725 case SAA7134_BOARD_BEHOLD_X7: 1726 fe0->dvb.frontend = dvb_attach(zl10353_attach, 1727 &behold_x7_config, 1728 &dev->i2c_adap); 1729 if (fe0->dvb.frontend) { 1730 dvb_attach(xc5000_attach, fe0->dvb.frontend, 1731 &dev->i2c_adap, &behold_x7_tunerconfig); 1732 } 1733 break; 1734 case SAA7134_BOARD_BEHOLD_H7: 1735 fe0->dvb.frontend = dvb_attach(zl10353_attach, 1736 &behold_x7_config, 1737 &dev->i2c_adap); 1738 if (fe0->dvb.frontend) { 1739 dvb_attach(xc5000_attach, fe0->dvb.frontend, 1740 &dev->i2c_adap, &behold_x7_tunerconfig); 1741 } 1742 break; 1743 case SAA7134_BOARD_AVERMEDIA_A700_PRO: 1744 case SAA7134_BOARD_AVERMEDIA_A700_HYBRID: 1745 /* Zarlink ZL10313 */ 1746 fe0->dvb.frontend = dvb_attach(mt312_attach, 1747 &avertv_a700_mt312, &dev->i2c_adap); 1748 if (fe0->dvb.frontend) { 1749 if (dvb_attach(zl10036_attach, fe0->dvb.frontend, 1750 &avertv_a700_tuner, &dev->i2c_adap) == NULL) { 1751 pr_warn("%s: No zl10036 found!\n", 1752 __func__); 1753 } 1754 } 1755 break; 1756 case SAA7134_BOARD_VIDEOMATE_S350: 1757 fe0->dvb.frontend = dvb_attach(mt312_attach, 1758 &zl10313_compro_s350_config, &dev->i2c_adap); 1759 if (fe0->dvb.frontend) 1760 if (dvb_attach(zl10039_attach, fe0->dvb.frontend, 1761 0x60, &dev->i2c_adap) == NULL) 1762 pr_warn("%s: No zl10039 found!\n", 1763 __func__); 1764 1765 break; 1766 case SAA7134_BOARD_VIDEOMATE_T750: 1767 fe0->dvb.frontend = dvb_attach(zl10353_attach, 1768 &videomate_t750_zl10353_config, 1769 &dev->i2c_adap); 1770 if (fe0->dvb.frontend != NULL) { 1771 if (dvb_attach(qt1010_attach, 1772 fe0->dvb.frontend, 1773 &dev->i2c_adap, 1774 &videomate_t750_qt1010_config) == NULL) 1775 pr_warn("error attaching QT1010\n"); 1776 } 1777 break; 1778 case SAA7134_BOARD_ZOLID_HYBRID_PCI: 1779 fe0->dvb.frontend = dvb_attach(tda10048_attach, 1780 &zolid_tda10048_config, 1781 &dev->i2c_adap); 1782 if (fe0->dvb.frontend != NULL) { 1783 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1784 &dev->i2c_adap, 0x4b, 1785 &tda829x_no_probe); 1786 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1787 0x60, &dev->i2c_adap, 1788 &zolid_tda18271_config); 1789 } 1790 break; 1791 case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S: 1792 fe0->dvb.frontend = dvb_attach(tda10048_attach, 1793 &dtv1000s_tda10048_config, 1794 &dev->i2c_adap); 1795 if (fe0->dvb.frontend != NULL) { 1796 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1797 &dev->i2c_adap, 0x4b, 1798 &tda829x_no_probe); 1799 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1800 0x60, &dev->i2c_adap, 1801 &dtv1000s_tda18271_config); 1802 } 1803 break; 1804 case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG: 1805 /* Switch to digital mode */ 1806 saa7134_tuner_callback(dev, 0, 1807 TDA18271_CALLBACK_CMD_AGC_ENABLE, 1); 1808 fe0->dvb.frontend = dvb_attach(mb86a20s_attach, 1809 &kworld_mb86a20s_config, 1810 &dev->i2c_adap); 1811 if (fe0->dvb.frontend != NULL) { 1812 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1813 &dev->i2c_adap, 0x4b, 1814 &tda829x_no_probe); 1815 fe0->dvb.frontend->ops.i2c_gate_ctrl = kworld_sbtvd_gate_ctrl; 1816 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1817 0x60, &dev->i2c_adap, 1818 &kworld_tda18271_config); 1819 } 1820 1821 /* mb86a20s need to use the I2C gateway */ 1822 break; 1823 case SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2: 1824 fe0->dvb.frontend = dvb_attach(lgs8gxx_attach, 1825 &prohdtv_pro2_lgs8g75_config, 1826 &dev->i2c_adap); 1827 if (fe0->dvb.frontend != NULL) { 1828 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1829 &dev->i2c_adap, 0x4b, 1830 &tda829x_no_probe); 1831 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1832 0x60, &dev->i2c_adap, 1833 &prohdtv_pro2_tda18271_config); 1834 } 1835 break; 1836 case SAA7134_BOARD_AVERMEDIA_A706: 1837 /* Enable all DVB-S devices now */ 1838 /* CE5039 DVB-S tuner SLEEP pin low */ 1839 saa7134_set_gpio(dev, 23, 0); 1840 /* CE6313 DVB-S demod SLEEP pin low */ 1841 saa7134_set_gpio(dev, 9, 0); 1842 /* CE6313 DVB-S demod RESET# pin high */ 1843 saa7134_set_gpio(dev, 25, 1); 1844 msleep(1); 1845 fe0->dvb.frontend = dvb_attach(mt312_attach, 1846 &zl10313_avermedia_a706_config, &dev->i2c_adap); 1847 if (fe0->dvb.frontend) { 1848 fe0->dvb.frontend->ops.i2c_gate_ctrl = NULL; 1849 if (dvb_attach(zl10039_attach, fe0->dvb.frontend, 1850 0x60, &dev->i2c_adap) == NULL) 1851 pr_warn("%s: No zl10039 found!\n", 1852 __func__); 1853 } 1854 break; 1855 default: 1856 pr_warn("Huh? unknown DVB card?\n"); 1857 break; 1858 } 1859 1860 if (attach_xc3028) { 1861 struct dvb_frontend *fe; 1862 struct xc2028_config cfg = { 1863 .i2c_adap = &dev->i2c_adap, 1864 .i2c_addr = 0x61, 1865 }; 1866 1867 if (!fe0->dvb.frontend) 1868 goto detach_frontend; 1869 1870 fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg); 1871 if (!fe) { 1872 pr_err("%s/2: xc3028 attach failed\n", 1873 dev->name); 1874 goto detach_frontend; 1875 } 1876 } 1877 1878 if (NULL == fe0->dvb.frontend) { 1879 pr_err("%s/dvb: frontend initialization failed\n", dev->name); 1880 goto detach_frontend; 1881 } 1882 /* define general-purpose callback pointer */ 1883 fe0->dvb.frontend->callback = saa7134_tuner_callback; 1884 1885 /* register everything else */ 1886 ret = vb2_dvb_register_bus(&dev->frontends, THIS_MODULE, dev, 1887 &dev->pci->dev, adapter_nr, 0); 1888 1889 /* this sequence is necessary to make the tda1004x load its firmware 1890 * and to enter analog mode of hybrid boards 1891 */ 1892 if (!ret) { 1893 if (fe0->dvb.frontend->ops.init) 1894 fe0->dvb.frontend->ops.init(fe0->dvb.frontend); 1895 if (fe0->dvb.frontend->ops.sleep) 1896 fe0->dvb.frontend->ops.sleep(fe0->dvb.frontend); 1897 if (fe0->dvb.frontend->ops.tuner_ops.sleep) 1898 fe0->dvb.frontend->ops.tuner_ops.sleep(fe0->dvb.frontend); 1899 } 1900 return ret; 1901 1902 detach_frontend: 1903 vb2_dvb_dealloc_frontends(&dev->frontends); 1904 vb2_queue_release(&fe0->dvb.dvbq); 1905 return -EINVAL; 1906 } 1907 1908 static int dvb_fini(struct saa7134_dev *dev) 1909 { 1910 struct vb2_dvb_frontend *fe0; 1911 1912 /* Get the first frontend */ 1913 fe0 = vb2_dvb_get_frontend(&dev->frontends, 1); 1914 if (!fe0) 1915 return -EINVAL; 1916 1917 /* FIXME: I suspect that this code is bogus, since the entry for 1918 Pinnacle 300I DVB-T PAL already defines the proper init to allow 1919 the detection of mt2032 (TDA9887_PORT2_INACTIVE) 1920 */ 1921 if (dev->board == SAA7134_BOARD_PINNACLE_300I_DVBT_PAL) { 1922 struct v4l2_priv_tun_config tda9887_cfg; 1923 static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE; 1924 1925 tda9887_cfg.tuner = TUNER_TDA9887; 1926 tda9887_cfg.priv = &on; 1927 1928 /* otherwise we don't detect the tuner on next insmod */ 1929 saa_call_all(dev, tuner, s_config, &tda9887_cfg); 1930 } else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) { 1931 if ((dev->eedata[2] == 0x07) && use_frontend) { 1932 /* turn off the 2nd lnb supply */ 1933 u8 data = 0x80; 1934 struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1}; 1935 struct dvb_frontend *fe; 1936 fe = fe0->dvb.frontend; 1937 if (fe->ops.i2c_gate_ctrl) { 1938 fe->ops.i2c_gate_ctrl(fe, 1); 1939 i2c_transfer(&dev->i2c_adap, &msg, 1); 1940 fe->ops.i2c_gate_ctrl(fe, 0); 1941 } 1942 } 1943 } 1944 vb2_dvb_unregister_bus(&dev->frontends); 1945 vb2_queue_release(&fe0->dvb.dvbq); 1946 return 0; 1947 } 1948 1949 static struct saa7134_mpeg_ops dvb_ops = { 1950 .type = SAA7134_MPEG_DVB, 1951 .init = dvb_init, 1952 .fini = dvb_fini, 1953 }; 1954 1955 static int __init dvb_register(void) 1956 { 1957 return saa7134_ts_register(&dvb_ops); 1958 } 1959 1960 static void __exit dvb_unregister(void) 1961 { 1962 saa7134_ts_unregister(&dvb_ops); 1963 } 1964 1965 module_init(dvb_register); 1966 module_exit(dvb_unregister); 1967