1 /* 2 * 3 * (c) 2004 Gerd Knorr <kraxel@bytesex.org> [SuSE Labs] 4 * 5 * Extended 3 / 2005 by Hartmut Hackmann to support various 6 * cards with the tda10046 DVB-T channel decoder 7 * 8 * This program is free software; you can redistribute it and/or modify 9 * it under the terms of the GNU General Public License as published by 10 * the Free Software Foundation; either version 2 of the License, or 11 * (at your option) any later version. 12 * 13 * This program is distributed in the hope that it will be useful, 14 * but WITHOUT ANY WARRANTY; without even the implied warranty of 15 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 16 * GNU General Public License for more details. 17 * 18 * You should have received a copy of the GNU General Public License 19 * along with this program; if not, write to the Free Software 20 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 21 */ 22 23 #include <linux/init.h> 24 #include <linux/list.h> 25 #include <linux/module.h> 26 #include <linux/kernel.h> 27 #include <linux/delay.h> 28 #include <linux/kthread.h> 29 #include <linux/suspend.h> 30 31 #include "saa7134-reg.h" 32 #include "saa7134.h" 33 #include <media/v4l2-common.h> 34 #include "dvb-pll.h" 35 #include <dvb_frontend.h> 36 37 #include "mt352.h" 38 #include "mt352_priv.h" /* FIXME */ 39 #include "tda1004x.h" 40 #include "nxt200x.h" 41 #include "tuner-xc2028.h" 42 #include "xc5000.h" 43 44 #include "tda10086.h" 45 #include "tda826x.h" 46 #include "tda827x.h" 47 #include "isl6421.h" 48 #include "isl6405.h" 49 #include "lnbp21.h" 50 #include "tuner-simple.h" 51 #include "tda10048.h" 52 #include "tda18271.h" 53 #include "lgdt3305.h" 54 #include "tda8290.h" 55 #include "mb86a20s.h" 56 #include "lgs8gxx.h" 57 58 #include "zl10353.h" 59 #include "qt1010.h" 60 61 #include "zl10036.h" 62 #include "zl10039.h" 63 #include "mt312.h" 64 #include "s5h1411.h" 65 66 MODULE_AUTHOR("Gerd Knorr <kraxel@bytesex.org> [SuSE Labs]"); 67 MODULE_LICENSE("GPL"); 68 69 static unsigned int antenna_pwr; 70 71 module_param(antenna_pwr, int, 0444); 72 MODULE_PARM_DESC(antenna_pwr,"enable antenna power (Pinnacle 300i)"); 73 74 static int use_frontend; 75 module_param(use_frontend, int, 0644); 76 MODULE_PARM_DESC(use_frontend,"for cards with multiple frontends (0: terrestrial, 1: satellite)"); 77 78 static int debug; 79 module_param(debug, int, 0644); 80 MODULE_PARM_DESC(debug, "Turn on/off module debugging (default:off)."); 81 82 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); 83 84 #define dprintk(fmt, arg...) do { if (debug) \ 85 printk(KERN_DEBUG "%s/dvb: " fmt, dev->name , ## arg); } while(0) 86 87 /* Print a warning */ 88 #define wprintk(fmt, arg...) \ 89 printk(KERN_WARNING "%s/dvb: " fmt, dev->name, ## arg) 90 91 /* ------------------------------------------------------------------ 92 * mt352 based DVB-T cards 93 */ 94 95 static int pinnacle_antenna_pwr(struct saa7134_dev *dev, int on) 96 { 97 u32 ok; 98 99 if (!on) { 100 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26)); 101 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); 102 return 0; 103 } 104 105 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 26)); 106 saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); 107 udelay(10); 108 109 saa_setl(SAA7134_GPIO_GPMODE0 >> 2, (1 << 28)); 110 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28)); 111 udelay(10); 112 saa_setl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 28)); 113 udelay(10); 114 ok = saa_readl(SAA7134_GPIO_GPSTATUS0) & (1 << 27); 115 dprintk("%s %s\n", __func__, ok ? "on" : "off"); 116 117 if (!ok) 118 saa_clearl(SAA7134_GPIO_GPSTATUS0 >> 2, (1 << 26)); 119 return ok; 120 } 121 122 static int mt352_pinnacle_init(struct dvb_frontend* fe) 123 { 124 static u8 clock_config [] = { CLOCK_CTL, 0x3d, 0x28 }; 125 static u8 reset [] = { RESET, 0x80 }; 126 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; 127 static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; 128 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x31 }; 129 static u8 fsm_ctl_cfg[] = { 0x7b, 0x04 }; 130 static u8 gpp_ctl_cfg [] = { GPP_CTL, 0x0f }; 131 static u8 scan_ctl_cfg [] = { SCAN_CTL, 0x0d }; 132 static u8 irq_cfg [] = { INTERRUPT_EN_0, 0x00, 0x00, 0x00, 0x00 }; 133 struct saa7134_dev *dev= fe->dvb->priv; 134 135 dprintk("%s called\n", __func__); 136 137 mt352_write(fe, clock_config, sizeof(clock_config)); 138 udelay(200); 139 mt352_write(fe, reset, sizeof(reset)); 140 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); 141 mt352_write(fe, agc_cfg, sizeof(agc_cfg)); 142 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); 143 mt352_write(fe, gpp_ctl_cfg, sizeof(gpp_ctl_cfg)); 144 145 mt352_write(fe, fsm_ctl_cfg, sizeof(fsm_ctl_cfg)); 146 mt352_write(fe, scan_ctl_cfg, sizeof(scan_ctl_cfg)); 147 mt352_write(fe, irq_cfg, sizeof(irq_cfg)); 148 149 return 0; 150 } 151 152 static int mt352_aver777_init(struct dvb_frontend* fe) 153 { 154 static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; 155 static u8 reset [] = { RESET, 0x80 }; 156 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; 157 static u8 agc_cfg [] = { AGC_TARGET, 0x28, 0xa0 }; 158 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 }; 159 160 mt352_write(fe, clock_config, sizeof(clock_config)); 161 udelay(200); 162 mt352_write(fe, reset, sizeof(reset)); 163 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); 164 mt352_write(fe, agc_cfg, sizeof(agc_cfg)); 165 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); 166 167 return 0; 168 } 169 170 static int mt352_avermedia_xc3028_init(struct dvb_frontend *fe) 171 { 172 static u8 clock_config [] = { CLOCK_CTL, 0x38, 0x2d }; 173 static u8 reset [] = { RESET, 0x80 }; 174 static u8 adc_ctl_1_cfg [] = { ADC_CTL_1, 0x40 }; 175 static u8 agc_cfg [] = { AGC_TARGET, 0xe }; 176 static u8 capt_range_cfg[] = { CAPT_RANGE, 0x33 }; 177 178 mt352_write(fe, clock_config, sizeof(clock_config)); 179 udelay(200); 180 mt352_write(fe, reset, sizeof(reset)); 181 mt352_write(fe, adc_ctl_1_cfg, sizeof(adc_ctl_1_cfg)); 182 mt352_write(fe, agc_cfg, sizeof(agc_cfg)); 183 mt352_write(fe, capt_range_cfg, sizeof(capt_range_cfg)); 184 return 0; 185 } 186 187 static int mt352_pinnacle_tuner_set_params(struct dvb_frontend *fe) 188 { 189 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 190 u8 off[] = { 0x00, 0xf1}; 191 u8 on[] = { 0x00, 0x71}; 192 struct i2c_msg msg = {.addr=0x43, .flags=0, .buf=off, .len = sizeof(off)}; 193 194 struct saa7134_dev *dev = fe->dvb->priv; 195 struct v4l2_frequency f; 196 197 /* set frequency (mt2050) */ 198 f.tuner = 0; 199 f.type = V4L2_TUNER_DIGITAL_TV; 200 f.frequency = c->frequency / 1000 * 16 / 1000; 201 if (fe->ops.i2c_gate_ctrl) 202 fe->ops.i2c_gate_ctrl(fe, 1); 203 i2c_transfer(&dev->i2c_adap, &msg, 1); 204 saa_call_all(dev, tuner, s_frequency, &f); 205 msg.buf = on; 206 if (fe->ops.i2c_gate_ctrl) 207 fe->ops.i2c_gate_ctrl(fe, 1); 208 i2c_transfer(&dev->i2c_adap, &msg, 1); 209 210 pinnacle_antenna_pwr(dev, antenna_pwr); 211 212 /* mt352 setup */ 213 return mt352_pinnacle_init(fe); 214 } 215 216 static struct mt352_config pinnacle_300i = { 217 .demod_address = 0x3c >> 1, 218 .adc_clock = 20333, 219 .if2 = 36150, 220 .no_tuner = 1, 221 .demod_init = mt352_pinnacle_init, 222 }; 223 224 static struct mt352_config avermedia_777 = { 225 .demod_address = 0xf, 226 .demod_init = mt352_aver777_init, 227 }; 228 229 static struct mt352_config avermedia_xc3028_mt352_dev = { 230 .demod_address = (0x1e >> 1), 231 .no_tuner = 1, 232 .demod_init = mt352_avermedia_xc3028_init, 233 }; 234 235 static struct tda18271_std_map mb86a20s_tda18271_std_map = { 236 .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, 237 .if_lvl = 7, .rfagc_top = 0x37, }, 238 }; 239 240 static struct tda18271_config kworld_tda18271_config = { 241 .std_map = &mb86a20s_tda18271_std_map, 242 .gate = TDA18271_GATE_DIGITAL, 243 .config = 3, /* Use tuner callback for AGC */ 244 245 }; 246 247 static const struct mb86a20s_config kworld_mb86a20s_config = { 248 .demod_address = 0x10, 249 }; 250 251 static int kworld_sbtvd_gate_ctrl(struct dvb_frontend* fe, int enable) 252 { 253 struct saa7134_dev *dev = fe->dvb->priv; 254 255 unsigned char initmsg[] = {0x45, 0x97}; 256 unsigned char msg_enable[] = {0x45, 0xc1}; 257 unsigned char msg_disable[] = {0x45, 0x81}; 258 struct i2c_msg msg = {.addr = 0x4b, .flags = 0, .buf = initmsg, .len = 2}; 259 260 if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { 261 wprintk("could not access the I2C gate\n"); 262 return -EIO; 263 } 264 if (enable) 265 msg.buf = msg_enable; 266 else 267 msg.buf = msg_disable; 268 if (i2c_transfer(&dev->i2c_adap, &msg, 1) != 1) { 269 wprintk("could not access the I2C gate\n"); 270 return -EIO; 271 } 272 msleep(20); 273 return 0; 274 } 275 276 /* ================================================================== 277 * tda1004x based DVB-T cards, helper functions 278 */ 279 280 static int philips_tda1004x_request_firmware(struct dvb_frontend *fe, 281 const struct firmware **fw, char *name) 282 { 283 struct saa7134_dev *dev = fe->dvb->priv; 284 return request_firmware(fw, name, &dev->pci->dev); 285 } 286 287 /* ------------------------------------------------------------------ 288 * these tuners are tu1216, td1316(a) 289 */ 290 291 static int philips_tda6651_pll_set(struct dvb_frontend *fe) 292 { 293 struct dtv_frontend_properties *c = &fe->dtv_property_cache; 294 struct saa7134_dev *dev = fe->dvb->priv; 295 struct tda1004x_state *state = fe->demodulator_priv; 296 u8 addr = state->config->tuner_address; 297 u8 tuner_buf[4]; 298 struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tuner_buf,.len = 299 sizeof(tuner_buf) }; 300 int tuner_frequency = 0; 301 u8 band, cp, filter; 302 303 /* determine charge pump */ 304 tuner_frequency = c->frequency + 36166000; 305 if (tuner_frequency < 87000000) 306 return -EINVAL; 307 else if (tuner_frequency < 130000000) 308 cp = 3; 309 else if (tuner_frequency < 160000000) 310 cp = 5; 311 else if (tuner_frequency < 200000000) 312 cp = 6; 313 else if (tuner_frequency < 290000000) 314 cp = 3; 315 else if (tuner_frequency < 420000000) 316 cp = 5; 317 else if (tuner_frequency < 480000000) 318 cp = 6; 319 else if (tuner_frequency < 620000000) 320 cp = 3; 321 else if (tuner_frequency < 830000000) 322 cp = 5; 323 else if (tuner_frequency < 895000000) 324 cp = 7; 325 else 326 return -EINVAL; 327 328 /* determine band */ 329 if (c->frequency < 49000000) 330 return -EINVAL; 331 else if (c->frequency < 161000000) 332 band = 1; 333 else if (c->frequency < 444000000) 334 band = 2; 335 else if (c->frequency < 861000000) 336 band = 4; 337 else 338 return -EINVAL; 339 340 /* setup PLL filter */ 341 switch (c->bandwidth_hz) { 342 case 6000000: 343 filter = 0; 344 break; 345 346 case 7000000: 347 filter = 0; 348 break; 349 350 case 8000000: 351 filter = 1; 352 break; 353 354 default: 355 return -EINVAL; 356 } 357 358 /* calculate divisor 359 * ((36166000+((1000000/6)/2)) + Finput)/(1000000/6) 360 */ 361 tuner_frequency = (((c->frequency / 1000) * 6) + 217496) / 1000; 362 363 /* setup tuner buffer */ 364 tuner_buf[0] = (tuner_frequency >> 8) & 0x7f; 365 tuner_buf[1] = tuner_frequency & 0xff; 366 tuner_buf[2] = 0xca; 367 tuner_buf[3] = (cp << 5) | (filter << 3) | band; 368 369 if (fe->ops.i2c_gate_ctrl) 370 fe->ops.i2c_gate_ctrl(fe, 1); 371 if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) { 372 wprintk("could not write to tuner at addr: 0x%02x\n", 373 addr << 1); 374 return -EIO; 375 } 376 msleep(1); 377 return 0; 378 } 379 380 static int philips_tu1216_init(struct dvb_frontend *fe) 381 { 382 struct saa7134_dev *dev = fe->dvb->priv; 383 struct tda1004x_state *state = fe->demodulator_priv; 384 u8 addr = state->config->tuner_address; 385 static u8 tu1216_init[] = { 0x0b, 0xf5, 0x85, 0xab }; 386 struct i2c_msg tuner_msg = {.addr = addr,.flags = 0,.buf = tu1216_init,.len = sizeof(tu1216_init) }; 387 388 /* setup PLL configuration */ 389 if (fe->ops.i2c_gate_ctrl) 390 fe->ops.i2c_gate_ctrl(fe, 1); 391 if (i2c_transfer(&dev->i2c_adap, &tuner_msg, 1) != 1) 392 return -EIO; 393 msleep(1); 394 395 return 0; 396 } 397 398 /* ------------------------------------------------------------------ */ 399 400 static struct tda1004x_config philips_tu1216_60_config = { 401 .demod_address = 0x8, 402 .invert = 1, 403 .invert_oclk = 0, 404 .xtal_freq = TDA10046_XTAL_4M, 405 .agc_config = TDA10046_AGC_DEFAULT, 406 .if_freq = TDA10046_FREQ_3617, 407 .tuner_address = 0x60, 408 .request_firmware = philips_tda1004x_request_firmware 409 }; 410 411 static struct tda1004x_config philips_tu1216_61_config = { 412 413 .demod_address = 0x8, 414 .invert = 1, 415 .invert_oclk = 0, 416 .xtal_freq = TDA10046_XTAL_4M, 417 .agc_config = TDA10046_AGC_DEFAULT, 418 .if_freq = TDA10046_FREQ_3617, 419 .tuner_address = 0x61, 420 .request_firmware = philips_tda1004x_request_firmware 421 }; 422 423 /* ------------------------------------------------------------------ */ 424 425 static int philips_td1316_tuner_init(struct dvb_frontend *fe) 426 { 427 struct saa7134_dev *dev = fe->dvb->priv; 428 struct tda1004x_state *state = fe->demodulator_priv; 429 u8 addr = state->config->tuner_address; 430 static u8 msg[] = { 0x0b, 0xf5, 0x86, 0xab }; 431 struct i2c_msg init_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) }; 432 433 /* setup PLL configuration */ 434 if (fe->ops.i2c_gate_ctrl) 435 fe->ops.i2c_gate_ctrl(fe, 1); 436 if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) 437 return -EIO; 438 return 0; 439 } 440 441 static int philips_td1316_tuner_set_params(struct dvb_frontend *fe) 442 { 443 return philips_tda6651_pll_set(fe); 444 } 445 446 static int philips_td1316_tuner_sleep(struct dvb_frontend *fe) 447 { 448 struct saa7134_dev *dev = fe->dvb->priv; 449 struct tda1004x_state *state = fe->demodulator_priv; 450 u8 addr = state->config->tuner_address; 451 static u8 msg[] = { 0x0b, 0xdc, 0x86, 0xa4 }; 452 struct i2c_msg analog_msg = {.addr = addr,.flags = 0,.buf = msg,.len = sizeof(msg) }; 453 454 /* switch the tuner to analog mode */ 455 if (fe->ops.i2c_gate_ctrl) 456 fe->ops.i2c_gate_ctrl(fe, 1); 457 if (i2c_transfer(&dev->i2c_adap, &analog_msg, 1) != 1) 458 return -EIO; 459 return 0; 460 } 461 462 /* ------------------------------------------------------------------ */ 463 464 static int philips_europa_tuner_init(struct dvb_frontend *fe) 465 { 466 struct saa7134_dev *dev = fe->dvb->priv; 467 static u8 msg[] = { 0x00, 0x40}; 468 struct i2c_msg init_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) }; 469 470 471 if (philips_td1316_tuner_init(fe)) 472 return -EIO; 473 msleep(1); 474 if (i2c_transfer(&dev->i2c_adap, &init_msg, 1) != 1) 475 return -EIO; 476 477 return 0; 478 } 479 480 static int philips_europa_tuner_sleep(struct dvb_frontend *fe) 481 { 482 struct saa7134_dev *dev = fe->dvb->priv; 483 484 static u8 msg[] = { 0x00, 0x14 }; 485 struct i2c_msg analog_msg = {.addr = 0x43,.flags = 0,.buf = msg,.len = sizeof(msg) }; 486 487 if (philips_td1316_tuner_sleep(fe)) 488 return -EIO; 489 490 /* switch the board to analog mode */ 491 if (fe->ops.i2c_gate_ctrl) 492 fe->ops.i2c_gate_ctrl(fe, 1); 493 i2c_transfer(&dev->i2c_adap, &analog_msg, 1); 494 return 0; 495 } 496 497 static int philips_europa_demod_sleep(struct dvb_frontend *fe) 498 { 499 struct saa7134_dev *dev = fe->dvb->priv; 500 501 if (dev->original_demod_sleep) 502 dev->original_demod_sleep(fe); 503 fe->ops.i2c_gate_ctrl(fe, 1); 504 return 0; 505 } 506 507 static struct tda1004x_config philips_europa_config = { 508 509 .demod_address = 0x8, 510 .invert = 0, 511 .invert_oclk = 0, 512 .xtal_freq = TDA10046_XTAL_4M, 513 .agc_config = TDA10046_AGC_IFO_AUTO_POS, 514 .if_freq = TDA10046_FREQ_052, 515 .tuner_address = 0x61, 516 .request_firmware = philips_tda1004x_request_firmware 517 }; 518 519 static struct tda1004x_config medion_cardbus = { 520 .demod_address = 0x08, 521 .invert = 1, 522 .invert_oclk = 0, 523 .xtal_freq = TDA10046_XTAL_16M, 524 .agc_config = TDA10046_AGC_IFO_AUTO_NEG, 525 .if_freq = TDA10046_FREQ_3613, 526 .tuner_address = 0x61, 527 .request_firmware = philips_tda1004x_request_firmware 528 }; 529 530 static struct tda1004x_config technotrend_budget_t3000_config = { 531 .demod_address = 0x8, 532 .invert = 1, 533 .invert_oclk = 0, 534 .xtal_freq = TDA10046_XTAL_4M, 535 .agc_config = TDA10046_AGC_DEFAULT, 536 .if_freq = TDA10046_FREQ_3617, 537 .tuner_address = 0x63, 538 .request_firmware = philips_tda1004x_request_firmware 539 }; 540 541 /* ------------------------------------------------------------------ 542 * tda 1004x based cards with philips silicon tuner 543 */ 544 545 static int tda8290_i2c_gate_ctrl( struct dvb_frontend* fe, int enable) 546 { 547 struct tda1004x_state *state = fe->demodulator_priv; 548 549 u8 addr = state->config->i2c_gate; 550 static u8 tda8290_close[] = { 0x21, 0xc0}; 551 static u8 tda8290_open[] = { 0x21, 0x80}; 552 struct i2c_msg tda8290_msg = {.addr = addr,.flags = 0, .len = 2}; 553 if (enable) { 554 tda8290_msg.buf = tda8290_close; 555 } else { 556 tda8290_msg.buf = tda8290_open; 557 } 558 if (i2c_transfer(state->i2c, &tda8290_msg, 1) != 1) { 559 struct saa7134_dev *dev = fe->dvb->priv; 560 wprintk("could not access tda8290 I2C gate\n"); 561 return -EIO; 562 } 563 msleep(20); 564 return 0; 565 } 566 567 static int philips_tda827x_tuner_init(struct dvb_frontend *fe) 568 { 569 struct saa7134_dev *dev = fe->dvb->priv; 570 struct tda1004x_state *state = fe->demodulator_priv; 571 572 switch (state->config->antenna_switch) { 573 case 0: break; 574 case 1: dprintk("setting GPIO21 to 0 (TV antenna?)\n"); 575 saa7134_set_gpio(dev, 21, 0); 576 break; 577 case 2: dprintk("setting GPIO21 to 1 (Radio antenna?)\n"); 578 saa7134_set_gpio(dev, 21, 1); 579 break; 580 } 581 return 0; 582 } 583 584 static int philips_tda827x_tuner_sleep(struct dvb_frontend *fe) 585 { 586 struct saa7134_dev *dev = fe->dvb->priv; 587 struct tda1004x_state *state = fe->demodulator_priv; 588 589 switch (state->config->antenna_switch) { 590 case 0: break; 591 case 1: dprintk("setting GPIO21 to 1 (Radio antenna?)\n"); 592 saa7134_set_gpio(dev, 21, 1); 593 break; 594 case 2: dprintk("setting GPIO21 to 0 (TV antenna?)\n"); 595 saa7134_set_gpio(dev, 21, 0); 596 break; 597 } 598 return 0; 599 } 600 601 static int configure_tda827x_fe(struct saa7134_dev *dev, 602 struct tda1004x_config *cdec_conf, 603 struct tda827x_config *tuner_conf) 604 { 605 struct videobuf_dvb_frontend *fe0; 606 607 /* Get the first frontend */ 608 fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); 609 610 fe0->dvb.frontend = dvb_attach(tda10046_attach, cdec_conf, &dev->i2c_adap); 611 if (fe0->dvb.frontend) { 612 if (cdec_conf->i2c_gate) 613 fe0->dvb.frontend->ops.i2c_gate_ctrl = tda8290_i2c_gate_ctrl; 614 if (dvb_attach(tda827x_attach, fe0->dvb.frontend, 615 cdec_conf->tuner_address, 616 &dev->i2c_adap, tuner_conf)) 617 return 0; 618 619 wprintk("no tda827x tuner found at addr: %02x\n", 620 cdec_conf->tuner_address); 621 } 622 return -EINVAL; 623 } 624 625 /* ------------------------------------------------------------------ */ 626 627 static struct tda827x_config tda827x_cfg_0 = { 628 .init = philips_tda827x_tuner_init, 629 .sleep = philips_tda827x_tuner_sleep, 630 .config = 0, 631 .switch_addr = 0 632 }; 633 634 static struct tda827x_config tda827x_cfg_1 = { 635 .init = philips_tda827x_tuner_init, 636 .sleep = philips_tda827x_tuner_sleep, 637 .config = 1, 638 .switch_addr = 0x4b 639 }; 640 641 static struct tda827x_config tda827x_cfg_2 = { 642 .init = philips_tda827x_tuner_init, 643 .sleep = philips_tda827x_tuner_sleep, 644 .config = 2, 645 .switch_addr = 0x4b 646 }; 647 648 static struct tda827x_config tda827x_cfg_2_sw42 = { 649 .init = philips_tda827x_tuner_init, 650 .sleep = philips_tda827x_tuner_sleep, 651 .config = 2, 652 .switch_addr = 0x42 653 }; 654 655 /* ------------------------------------------------------------------ */ 656 657 static struct tda1004x_config tda827x_lifeview_config = { 658 .demod_address = 0x08, 659 .invert = 1, 660 .invert_oclk = 0, 661 .xtal_freq = TDA10046_XTAL_16M, 662 .agc_config = TDA10046_AGC_TDA827X, 663 .gpio_config = TDA10046_GP11_I, 664 .if_freq = TDA10046_FREQ_045, 665 .tuner_address = 0x60, 666 .request_firmware = philips_tda1004x_request_firmware 667 }; 668 669 static struct tda1004x_config philips_tiger_config = { 670 .demod_address = 0x08, 671 .invert = 1, 672 .invert_oclk = 0, 673 .xtal_freq = TDA10046_XTAL_16M, 674 .agc_config = TDA10046_AGC_TDA827X, 675 .gpio_config = TDA10046_GP11_I, 676 .if_freq = TDA10046_FREQ_045, 677 .i2c_gate = 0x4b, 678 .tuner_address = 0x61, 679 .antenna_switch= 1, 680 .request_firmware = philips_tda1004x_request_firmware 681 }; 682 683 static struct tda1004x_config cinergy_ht_config = { 684 .demod_address = 0x08, 685 .invert = 1, 686 .invert_oclk = 0, 687 .xtal_freq = TDA10046_XTAL_16M, 688 .agc_config = TDA10046_AGC_TDA827X, 689 .gpio_config = TDA10046_GP01_I, 690 .if_freq = TDA10046_FREQ_045, 691 .i2c_gate = 0x4b, 692 .tuner_address = 0x61, 693 .request_firmware = philips_tda1004x_request_firmware 694 }; 695 696 static struct tda1004x_config cinergy_ht_pci_config = { 697 .demod_address = 0x08, 698 .invert = 1, 699 .invert_oclk = 0, 700 .xtal_freq = TDA10046_XTAL_16M, 701 .agc_config = TDA10046_AGC_TDA827X, 702 .gpio_config = TDA10046_GP01_I, 703 .if_freq = TDA10046_FREQ_045, 704 .i2c_gate = 0x4b, 705 .tuner_address = 0x60, 706 .request_firmware = philips_tda1004x_request_firmware 707 }; 708 709 static struct tda1004x_config philips_tiger_s_config = { 710 .demod_address = 0x08, 711 .invert = 1, 712 .invert_oclk = 0, 713 .xtal_freq = TDA10046_XTAL_16M, 714 .agc_config = TDA10046_AGC_TDA827X, 715 .gpio_config = TDA10046_GP01_I, 716 .if_freq = TDA10046_FREQ_045, 717 .i2c_gate = 0x4b, 718 .tuner_address = 0x61, 719 .antenna_switch= 1, 720 .request_firmware = philips_tda1004x_request_firmware 721 }; 722 723 static struct tda1004x_config pinnacle_pctv_310i_config = { 724 .demod_address = 0x08, 725 .invert = 1, 726 .invert_oclk = 0, 727 .xtal_freq = TDA10046_XTAL_16M, 728 .agc_config = TDA10046_AGC_TDA827X, 729 .gpio_config = TDA10046_GP11_I, 730 .if_freq = TDA10046_FREQ_045, 731 .i2c_gate = 0x4b, 732 .tuner_address = 0x61, 733 .request_firmware = philips_tda1004x_request_firmware 734 }; 735 736 static struct tda1004x_config hauppauge_hvr_1110_config = { 737 .demod_address = 0x08, 738 .invert = 1, 739 .invert_oclk = 0, 740 .xtal_freq = TDA10046_XTAL_16M, 741 .agc_config = TDA10046_AGC_TDA827X, 742 .gpio_config = TDA10046_GP11_I, 743 .if_freq = TDA10046_FREQ_045, 744 .i2c_gate = 0x4b, 745 .tuner_address = 0x61, 746 .request_firmware = philips_tda1004x_request_firmware 747 }; 748 749 static struct tda1004x_config asus_p7131_dual_config = { 750 .demod_address = 0x08, 751 .invert = 1, 752 .invert_oclk = 0, 753 .xtal_freq = TDA10046_XTAL_16M, 754 .agc_config = TDA10046_AGC_TDA827X, 755 .gpio_config = TDA10046_GP11_I, 756 .if_freq = TDA10046_FREQ_045, 757 .i2c_gate = 0x4b, 758 .tuner_address = 0x61, 759 .antenna_switch= 2, 760 .request_firmware = philips_tda1004x_request_firmware 761 }; 762 763 static struct tda1004x_config lifeview_trio_config = { 764 .demod_address = 0x09, 765 .invert = 1, 766 .invert_oclk = 0, 767 .xtal_freq = TDA10046_XTAL_16M, 768 .agc_config = TDA10046_AGC_TDA827X, 769 .gpio_config = TDA10046_GP00_I, 770 .if_freq = TDA10046_FREQ_045, 771 .tuner_address = 0x60, 772 .request_firmware = philips_tda1004x_request_firmware 773 }; 774 775 static struct tda1004x_config tevion_dvbt220rf_config = { 776 .demod_address = 0x08, 777 .invert = 1, 778 .invert_oclk = 0, 779 .xtal_freq = TDA10046_XTAL_16M, 780 .agc_config = TDA10046_AGC_TDA827X, 781 .gpio_config = TDA10046_GP11_I, 782 .if_freq = TDA10046_FREQ_045, 783 .tuner_address = 0x60, 784 .request_firmware = philips_tda1004x_request_firmware 785 }; 786 787 static struct tda1004x_config md8800_dvbt_config = { 788 .demod_address = 0x08, 789 .invert = 1, 790 .invert_oclk = 0, 791 .xtal_freq = TDA10046_XTAL_16M, 792 .agc_config = TDA10046_AGC_TDA827X, 793 .gpio_config = TDA10046_GP01_I, 794 .if_freq = TDA10046_FREQ_045, 795 .i2c_gate = 0x4b, 796 .tuner_address = 0x60, 797 .request_firmware = philips_tda1004x_request_firmware 798 }; 799 800 static struct tda1004x_config asus_p7131_4871_config = { 801 .demod_address = 0x08, 802 .invert = 1, 803 .invert_oclk = 0, 804 .xtal_freq = TDA10046_XTAL_16M, 805 .agc_config = TDA10046_AGC_TDA827X, 806 .gpio_config = TDA10046_GP01_I, 807 .if_freq = TDA10046_FREQ_045, 808 .i2c_gate = 0x4b, 809 .tuner_address = 0x61, 810 .antenna_switch= 2, 811 .request_firmware = philips_tda1004x_request_firmware 812 }; 813 814 static struct tda1004x_config asus_p7131_hybrid_lna_config = { 815 .demod_address = 0x08, 816 .invert = 1, 817 .invert_oclk = 0, 818 .xtal_freq = TDA10046_XTAL_16M, 819 .agc_config = TDA10046_AGC_TDA827X, 820 .gpio_config = TDA10046_GP11_I, 821 .if_freq = TDA10046_FREQ_045, 822 .i2c_gate = 0x4b, 823 .tuner_address = 0x61, 824 .antenna_switch= 2, 825 .request_firmware = philips_tda1004x_request_firmware 826 }; 827 828 static struct tda1004x_config kworld_dvb_t_210_config = { 829 .demod_address = 0x08, 830 .invert = 1, 831 .invert_oclk = 0, 832 .xtal_freq = TDA10046_XTAL_16M, 833 .agc_config = TDA10046_AGC_TDA827X, 834 .gpio_config = TDA10046_GP11_I, 835 .if_freq = TDA10046_FREQ_045, 836 .i2c_gate = 0x4b, 837 .tuner_address = 0x61, 838 .antenna_switch= 1, 839 .request_firmware = philips_tda1004x_request_firmware 840 }; 841 842 static struct tda1004x_config avermedia_super_007_config = { 843 .demod_address = 0x08, 844 .invert = 1, 845 .invert_oclk = 0, 846 .xtal_freq = TDA10046_XTAL_16M, 847 .agc_config = TDA10046_AGC_TDA827X, 848 .gpio_config = TDA10046_GP01_I, 849 .if_freq = TDA10046_FREQ_045, 850 .i2c_gate = 0x4b, 851 .tuner_address = 0x60, 852 .antenna_switch= 1, 853 .request_firmware = philips_tda1004x_request_firmware 854 }; 855 856 static struct tda1004x_config twinhan_dtv_dvb_3056_config = { 857 .demod_address = 0x08, 858 .invert = 1, 859 .invert_oclk = 0, 860 .xtal_freq = TDA10046_XTAL_16M, 861 .agc_config = TDA10046_AGC_TDA827X, 862 .gpio_config = TDA10046_GP01_I, 863 .if_freq = TDA10046_FREQ_045, 864 .i2c_gate = 0x42, 865 .tuner_address = 0x61, 866 .antenna_switch = 1, 867 .request_firmware = philips_tda1004x_request_firmware 868 }; 869 870 static struct tda1004x_config asus_tiger_3in1_config = { 871 .demod_address = 0x0b, 872 .invert = 1, 873 .invert_oclk = 0, 874 .xtal_freq = TDA10046_XTAL_16M, 875 .agc_config = TDA10046_AGC_TDA827X, 876 .gpio_config = TDA10046_GP11_I, 877 .if_freq = TDA10046_FREQ_045, 878 .i2c_gate = 0x4b, 879 .tuner_address = 0x61, 880 .antenna_switch = 1, 881 .request_firmware = philips_tda1004x_request_firmware 882 }; 883 884 static struct tda1004x_config asus_ps3_100_config = { 885 .demod_address = 0x0b, 886 .invert = 1, 887 .invert_oclk = 0, 888 .xtal_freq = TDA10046_XTAL_16M, 889 .agc_config = TDA10046_AGC_TDA827X, 890 .gpio_config = TDA10046_GP11_I, 891 .if_freq = TDA10046_FREQ_045, 892 .i2c_gate = 0x4b, 893 .tuner_address = 0x61, 894 .antenna_switch = 1, 895 .request_firmware = philips_tda1004x_request_firmware 896 }; 897 898 /* ------------------------------------------------------------------ 899 * special case: this card uses saa713x GPIO22 for the mode switch 900 */ 901 902 static int ads_duo_tuner_init(struct dvb_frontend *fe) 903 { 904 struct saa7134_dev *dev = fe->dvb->priv; 905 philips_tda827x_tuner_init(fe); 906 /* route TDA8275a AGC input to the channel decoder */ 907 saa7134_set_gpio(dev, 22, 1); 908 return 0; 909 } 910 911 static int ads_duo_tuner_sleep(struct dvb_frontend *fe) 912 { 913 struct saa7134_dev *dev = fe->dvb->priv; 914 /* route TDA8275a AGC input to the analog IF chip*/ 915 saa7134_set_gpio(dev, 22, 0); 916 philips_tda827x_tuner_sleep(fe); 917 return 0; 918 } 919 920 static struct tda827x_config ads_duo_cfg = { 921 .init = ads_duo_tuner_init, 922 .sleep = ads_duo_tuner_sleep, 923 .config = 0 924 }; 925 926 static struct tda1004x_config ads_tech_duo_config = { 927 .demod_address = 0x08, 928 .invert = 1, 929 .invert_oclk = 0, 930 .xtal_freq = TDA10046_XTAL_16M, 931 .agc_config = TDA10046_AGC_TDA827X, 932 .gpio_config = TDA10046_GP00_I, 933 .if_freq = TDA10046_FREQ_045, 934 .tuner_address = 0x61, 935 .request_firmware = philips_tda1004x_request_firmware 936 }; 937 938 static struct zl10353_config behold_h6_config = { 939 .demod_address = 0x1e>>1, 940 .no_tuner = 1, 941 .parallel_ts = 1, 942 .disable_i2c_gate_ctrl = 1, 943 }; 944 945 static struct xc5000_config behold_x7_tunerconfig = { 946 .i2c_address = 0xc2>>1, 947 .if_khz = 4560, 948 .radio_input = XC5000_RADIO_FM1, 949 }; 950 951 static struct zl10353_config behold_x7_config = { 952 .demod_address = 0x1e>>1, 953 .if2 = 45600, 954 .no_tuner = 1, 955 .parallel_ts = 1, 956 .disable_i2c_gate_ctrl = 1, 957 }; 958 959 static struct zl10353_config videomate_t750_zl10353_config = { 960 .demod_address = 0x0f, 961 .no_tuner = 1, 962 .parallel_ts = 1, 963 .disable_i2c_gate_ctrl = 1, 964 }; 965 966 static struct qt1010_config videomate_t750_qt1010_config = { 967 .i2c_address = 0x62 968 }; 969 970 971 /* ================================================================== 972 * tda10086 based DVB-S cards, helper functions 973 */ 974 975 static struct tda10086_config flydvbs = { 976 .demod_address = 0x0e, 977 .invert = 0, 978 .diseqc_tone = 0, 979 .xtal_freq = TDA10086_XTAL_16M, 980 }; 981 982 static struct tda10086_config sd1878_4m = { 983 .demod_address = 0x0e, 984 .invert = 0, 985 .diseqc_tone = 0, 986 .xtal_freq = TDA10086_XTAL_4M, 987 }; 988 989 /* ------------------------------------------------------------------ 990 * special case: lnb supply is connected to the gated i2c 991 */ 992 993 static int md8800_set_voltage(struct dvb_frontend *fe, fe_sec_voltage_t voltage) 994 { 995 int res = -EIO; 996 struct saa7134_dev *dev = fe->dvb->priv; 997 if (fe->ops.i2c_gate_ctrl) { 998 fe->ops.i2c_gate_ctrl(fe, 1); 999 if (dev->original_set_voltage) 1000 res = dev->original_set_voltage(fe, voltage); 1001 fe->ops.i2c_gate_ctrl(fe, 0); 1002 } 1003 return res; 1004 }; 1005 1006 static int md8800_set_high_voltage(struct dvb_frontend *fe, long arg) 1007 { 1008 int res = -EIO; 1009 struct saa7134_dev *dev = fe->dvb->priv; 1010 if (fe->ops.i2c_gate_ctrl) { 1011 fe->ops.i2c_gate_ctrl(fe, 1); 1012 if (dev->original_set_high_voltage) 1013 res = dev->original_set_high_voltage(fe, arg); 1014 fe->ops.i2c_gate_ctrl(fe, 0); 1015 } 1016 return res; 1017 }; 1018 1019 static int md8800_set_voltage2(struct dvb_frontend *fe, fe_sec_voltage_t voltage) 1020 { 1021 struct saa7134_dev *dev = fe->dvb->priv; 1022 u8 wbuf[2] = { 0x1f, 00 }; 1023 u8 rbuf; 1024 struct i2c_msg msg[] = { { .addr = 0x08, .flags = 0, .buf = wbuf, .len = 1 }, 1025 { .addr = 0x08, .flags = I2C_M_RD, .buf = &rbuf, .len = 1 } }; 1026 1027 if (i2c_transfer(&dev->i2c_adap, msg, 2) != 2) 1028 return -EIO; 1029 /* NOTE: this assumes that gpo1 is used, it might be bit 5 (gpo2) */ 1030 if (voltage == SEC_VOLTAGE_18) 1031 wbuf[1] = rbuf | 0x10; 1032 else 1033 wbuf[1] = rbuf & 0xef; 1034 msg[0].len = 2; 1035 i2c_transfer(&dev->i2c_adap, msg, 1); 1036 return 0; 1037 } 1038 1039 static int md8800_set_high_voltage2(struct dvb_frontend *fe, long arg) 1040 { 1041 struct saa7134_dev *dev = fe->dvb->priv; 1042 wprintk("%s: sorry can't set high LNB supply voltage from here\n", __func__); 1043 return -EIO; 1044 } 1045 1046 /* ================================================================== 1047 * nxt200x based ATSC cards, helper functions 1048 */ 1049 1050 static struct nxt200x_config avertvhda180 = { 1051 .demod_address = 0x0a, 1052 }; 1053 1054 static struct nxt200x_config kworldatsc110 = { 1055 .demod_address = 0x0a, 1056 }; 1057 1058 /* ------------------------------------------------------------------ */ 1059 1060 static struct mt312_config avertv_a700_mt312 = { 1061 .demod_address = 0x0e, 1062 .voltage_inverted = 1, 1063 }; 1064 1065 static struct zl10036_config avertv_a700_tuner = { 1066 .tuner_address = 0x60, 1067 }; 1068 1069 static struct mt312_config zl10313_compro_s350_config = { 1070 .demod_address = 0x0e, 1071 }; 1072 1073 static struct lgdt3305_config hcw_lgdt3305_config = { 1074 .i2c_addr = 0x0e, 1075 .mpeg_mode = LGDT3305_MPEG_SERIAL, 1076 .tpclk_edge = LGDT3305_TPCLK_RISING_EDGE, 1077 .tpvalid_polarity = LGDT3305_TP_VALID_HIGH, 1078 .deny_i2c_rptr = 1, 1079 .spectral_inversion = 1, 1080 .qam_if_khz = 4000, 1081 .vsb_if_khz = 3250, 1082 }; 1083 1084 static struct tda10048_config hcw_tda10048_config = { 1085 .demod_address = 0x10 >> 1, 1086 .output_mode = TDA10048_SERIAL_OUTPUT, 1087 .fwbulkwritelen = TDA10048_BULKWRITE_200, 1088 .inversion = TDA10048_INVERSION_ON, 1089 .dtv6_if_freq_khz = TDA10048_IF_3300, 1090 .dtv7_if_freq_khz = TDA10048_IF_3500, 1091 .dtv8_if_freq_khz = TDA10048_IF_4000, 1092 .clk_freq_khz = TDA10048_CLK_16000, 1093 .disable_gate_access = 1, 1094 }; 1095 1096 static struct tda18271_std_map hauppauge_tda18271_std_map = { 1097 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 4, 1098 .if_lvl = 1, .rfagc_top = 0x58, }, 1099 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 5, 1100 .if_lvl = 1, .rfagc_top = 0x58, }, 1101 }; 1102 1103 static struct tda18271_config hcw_tda18271_config = { 1104 .std_map = &hauppauge_tda18271_std_map, 1105 .gate = TDA18271_GATE_ANALOG, 1106 .config = 3, 1107 .output_opt = TDA18271_OUTPUT_LT_OFF, 1108 }; 1109 1110 static struct tda829x_config tda829x_no_probe = { 1111 .probe_tuner = TDA829X_DONT_PROBE, 1112 }; 1113 1114 static struct tda10048_config zolid_tda10048_config = { 1115 .demod_address = 0x10 >> 1, 1116 .output_mode = TDA10048_PARALLEL_OUTPUT, 1117 .fwbulkwritelen = TDA10048_BULKWRITE_200, 1118 .inversion = TDA10048_INVERSION_ON, 1119 .dtv6_if_freq_khz = TDA10048_IF_3300, 1120 .dtv7_if_freq_khz = TDA10048_IF_3500, 1121 .dtv8_if_freq_khz = TDA10048_IF_4000, 1122 .clk_freq_khz = TDA10048_CLK_16000, 1123 .disable_gate_access = 1, 1124 }; 1125 1126 static struct tda18271_config zolid_tda18271_config = { 1127 .gate = TDA18271_GATE_ANALOG, 1128 }; 1129 1130 static struct tda10048_config dtv1000s_tda10048_config = { 1131 .demod_address = 0x10 >> 1, 1132 .output_mode = TDA10048_PARALLEL_OUTPUT, 1133 .fwbulkwritelen = TDA10048_BULKWRITE_200, 1134 .inversion = TDA10048_INVERSION_ON, 1135 .dtv6_if_freq_khz = TDA10048_IF_3300, 1136 .dtv7_if_freq_khz = TDA10048_IF_3800, 1137 .dtv8_if_freq_khz = TDA10048_IF_4300, 1138 .clk_freq_khz = TDA10048_CLK_16000, 1139 .disable_gate_access = 1, 1140 }; 1141 1142 static struct tda18271_std_map dtv1000s_tda18271_std_map = { 1143 .dvbt_6 = { .if_freq = 3300, .agc_mode = 3, .std = 4, 1144 .if_lvl = 1, .rfagc_top = 0x37, }, 1145 .dvbt_7 = { .if_freq = 3800, .agc_mode = 3, .std = 5, 1146 .if_lvl = 1, .rfagc_top = 0x37, }, 1147 .dvbt_8 = { .if_freq = 4300, .agc_mode = 3, .std = 6, 1148 .if_lvl = 1, .rfagc_top = 0x37, }, 1149 }; 1150 1151 static struct tda18271_config dtv1000s_tda18271_config = { 1152 .std_map = &dtv1000s_tda18271_std_map, 1153 .gate = TDA18271_GATE_ANALOG, 1154 }; 1155 1156 static struct lgs8gxx_config prohdtv_pro2_lgs8g75_config = { 1157 .prod = LGS8GXX_PROD_LGS8G75, 1158 .demod_address = 0x1d, 1159 .serial_ts = 0, 1160 .ts_clk_pol = 1, 1161 .ts_clk_gated = 0, 1162 .if_clk_freq = 30400, /* 30.4 MHz */ 1163 .if_freq = 4000, /* 4.00 MHz */ 1164 .if_neg_center = 0, 1165 .ext_adc = 0, 1166 .adc_signed = 1, 1167 .adc_vpp = 3, /* 2.0 Vpp */ 1168 .if_neg_edge = 1, 1169 }; 1170 1171 static struct tda18271_config prohdtv_pro2_tda18271_config = { 1172 .gate = TDA18271_GATE_ANALOG, 1173 .output_opt = TDA18271_OUTPUT_LT_OFF, 1174 }; 1175 1176 static struct tda18271_std_map kworld_tda18271_std_map = { 1177 .atsc_6 = { .if_freq = 3250, .agc_mode = 3, .std = 3, 1178 .if_lvl = 6, .rfagc_top = 0x37 }, 1179 .qam_6 = { .if_freq = 4000, .agc_mode = 3, .std = 0, 1180 .if_lvl = 6, .rfagc_top = 0x37 }, 1181 }; 1182 1183 static struct tda18271_config kworld_pc150u_tda18271_config = { 1184 .std_map = &kworld_tda18271_std_map, 1185 .gate = TDA18271_GATE_ANALOG, 1186 .output_opt = TDA18271_OUTPUT_LT_OFF, 1187 .config = 3, /* Use tuner callback for AGC */ 1188 .rf_cal_on_startup = 1 1189 }; 1190 1191 static struct s5h1411_config kworld_s5h1411_config = { 1192 .output_mode = S5H1411_PARALLEL_OUTPUT, 1193 .gpio = S5H1411_GPIO_OFF, 1194 .qam_if = S5H1411_IF_4000, 1195 .vsb_if = S5H1411_IF_3250, 1196 .inversion = S5H1411_INVERSION_ON, 1197 .status_mode = S5H1411_DEMODLOCKING, 1198 .mpeg_timing = 1199 S5H1411_MPEGTIMING_CONTINOUS_NONINVERTING_CLOCK, 1200 }; 1201 1202 1203 /* ================================================================== 1204 * Core code 1205 */ 1206 1207 static int dvb_init(struct saa7134_dev *dev) 1208 { 1209 int ret; 1210 int attach_xc3028 = 0; 1211 struct videobuf_dvb_frontend *fe0; 1212 1213 /* FIXME: add support for multi-frontend */ 1214 mutex_init(&dev->frontends.lock); 1215 INIT_LIST_HEAD(&dev->frontends.felist); 1216 1217 printk(KERN_INFO "%s() allocating 1 frontend\n", __func__); 1218 fe0 = videobuf_dvb_alloc_frontend(&dev->frontends, 1); 1219 if (!fe0) { 1220 printk(KERN_ERR "%s() failed to alloc\n", __func__); 1221 return -ENOMEM; 1222 } 1223 1224 /* init struct videobuf_dvb */ 1225 dev->ts.nr_bufs = 32; 1226 dev->ts.nr_packets = 32*4; 1227 fe0->dvb.name = dev->name; 1228 videobuf_queue_sg_init(&fe0->dvb.dvbq, &saa7134_ts_qops, 1229 &dev->pci->dev, &dev->slock, 1230 V4L2_BUF_TYPE_VIDEO_CAPTURE, 1231 V4L2_FIELD_ALTERNATE, 1232 sizeof(struct saa7134_buf), 1233 dev, NULL); 1234 1235 switch (dev->board) { 1236 case SAA7134_BOARD_PINNACLE_300I_DVBT_PAL: 1237 dprintk("pinnacle 300i dvb setup\n"); 1238 fe0->dvb.frontend = dvb_attach(mt352_attach, &pinnacle_300i, 1239 &dev->i2c_adap); 1240 if (fe0->dvb.frontend) { 1241 fe0->dvb.frontend->ops.tuner_ops.set_params = mt352_pinnacle_tuner_set_params; 1242 } 1243 break; 1244 case SAA7134_BOARD_AVERMEDIA_777: 1245 case SAA7134_BOARD_AVERMEDIA_A16AR: 1246 dprintk("avertv 777 dvb setup\n"); 1247 fe0->dvb.frontend = dvb_attach(mt352_attach, &avermedia_777, 1248 &dev->i2c_adap); 1249 if (fe0->dvb.frontend) { 1250 dvb_attach(simple_tuner_attach, fe0->dvb.frontend, 1251 &dev->i2c_adap, 0x61, 1252 TUNER_PHILIPS_TD1316); 1253 } 1254 break; 1255 case SAA7134_BOARD_AVERMEDIA_A16D: 1256 dprintk("AverMedia A16D dvb setup\n"); 1257 fe0->dvb.frontend = dvb_attach(mt352_attach, 1258 &avermedia_xc3028_mt352_dev, 1259 &dev->i2c_adap); 1260 attach_xc3028 = 1; 1261 break; 1262 case SAA7134_BOARD_MD7134: 1263 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1264 &medion_cardbus, 1265 &dev->i2c_adap); 1266 if (fe0->dvb.frontend) { 1267 dvb_attach(simple_tuner_attach, fe0->dvb.frontend, 1268 &dev->i2c_adap, medion_cardbus.tuner_address, 1269 TUNER_PHILIPS_FMD1216ME_MK3); 1270 } 1271 break; 1272 case SAA7134_BOARD_PHILIPS_TOUGH: 1273 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1274 &philips_tu1216_60_config, 1275 &dev->i2c_adap); 1276 if (fe0->dvb.frontend) { 1277 fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; 1278 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; 1279 } 1280 break; 1281 case SAA7134_BOARD_FLYDVBTDUO: 1282 case SAA7134_BOARD_FLYDVBT_DUO_CARDBUS: 1283 if (configure_tda827x_fe(dev, &tda827x_lifeview_config, 1284 &tda827x_cfg_0) < 0) 1285 goto detach_frontend; 1286 break; 1287 case SAA7134_BOARD_PHILIPS_EUROPA: 1288 case SAA7134_BOARD_VIDEOMATE_DVBT_300: 1289 case SAA7134_BOARD_ASUS_EUROPA_HYBRID: 1290 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1291 &philips_europa_config, 1292 &dev->i2c_adap); 1293 if (fe0->dvb.frontend) { 1294 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; 1295 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; 1296 fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; 1297 fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; 1298 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; 1299 } 1300 break; 1301 case SAA7134_BOARD_TECHNOTREND_BUDGET_T3000: 1302 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1303 &technotrend_budget_t3000_config, 1304 &dev->i2c_adap); 1305 if (fe0->dvb.frontend) { 1306 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; 1307 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; 1308 fe0->dvb.frontend->ops.tuner_ops.init = philips_europa_tuner_init; 1309 fe0->dvb.frontend->ops.tuner_ops.sleep = philips_europa_tuner_sleep; 1310 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; 1311 } 1312 break; 1313 case SAA7134_BOARD_VIDEOMATE_DVBT_200: 1314 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1315 &philips_tu1216_61_config, 1316 &dev->i2c_adap); 1317 if (fe0->dvb.frontend) { 1318 fe0->dvb.frontend->ops.tuner_ops.init = philips_tu1216_init; 1319 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_tda6651_pll_set; 1320 } 1321 break; 1322 case SAA7134_BOARD_KWORLD_DVBT_210: 1323 if (configure_tda827x_fe(dev, &kworld_dvb_t_210_config, 1324 &tda827x_cfg_2) < 0) 1325 goto detach_frontend; 1326 break; 1327 case SAA7134_BOARD_HAUPPAUGE_HVR1120: 1328 fe0->dvb.frontend = dvb_attach(tda10048_attach, 1329 &hcw_tda10048_config, 1330 &dev->i2c_adap); 1331 if (fe0->dvb.frontend != NULL) { 1332 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1333 &dev->i2c_adap, 0x4b, 1334 &tda829x_no_probe); 1335 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1336 0x60, &dev->i2c_adap, 1337 &hcw_tda18271_config); 1338 } 1339 break; 1340 case SAA7134_BOARD_PHILIPS_TIGER: 1341 if (configure_tda827x_fe(dev, &philips_tiger_config, 1342 &tda827x_cfg_0) < 0) 1343 goto detach_frontend; 1344 break; 1345 case SAA7134_BOARD_PINNACLE_PCTV_310i: 1346 if (configure_tda827x_fe(dev, &pinnacle_pctv_310i_config, 1347 &tda827x_cfg_1) < 0) 1348 goto detach_frontend; 1349 break; 1350 case SAA7134_BOARD_HAUPPAUGE_HVR1110: 1351 if (configure_tda827x_fe(dev, &hauppauge_hvr_1110_config, 1352 &tda827x_cfg_1) < 0) 1353 goto detach_frontend; 1354 break; 1355 case SAA7134_BOARD_HAUPPAUGE_HVR1150: 1356 fe0->dvb.frontend = dvb_attach(lgdt3305_attach, 1357 &hcw_lgdt3305_config, 1358 &dev->i2c_adap); 1359 if (fe0->dvb.frontend) { 1360 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1361 &dev->i2c_adap, 0x4b, 1362 &tda829x_no_probe); 1363 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1364 0x60, &dev->i2c_adap, 1365 &hcw_tda18271_config); 1366 } 1367 break; 1368 case SAA7134_BOARD_ASUSTeK_P7131_DUAL: 1369 if (configure_tda827x_fe(dev, &asus_p7131_dual_config, 1370 &tda827x_cfg_0) < 0) 1371 goto detach_frontend; 1372 break; 1373 case SAA7134_BOARD_FLYDVBT_LR301: 1374 if (configure_tda827x_fe(dev, &tda827x_lifeview_config, 1375 &tda827x_cfg_0) < 0) 1376 goto detach_frontend; 1377 break; 1378 case SAA7134_BOARD_FLYDVB_TRIO: 1379 if (!use_frontend) { /* terrestrial */ 1380 if (configure_tda827x_fe(dev, &lifeview_trio_config, 1381 &tda827x_cfg_0) < 0) 1382 goto detach_frontend; 1383 } else { /* satellite */ 1384 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, &dev->i2c_adap); 1385 if (fe0->dvb.frontend) { 1386 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x63, 1387 &dev->i2c_adap, 0) == NULL) { 1388 wprintk("%s: Lifeview Trio, No tda826x found!\n", __func__); 1389 goto detach_frontend; 1390 } 1391 if (dvb_attach(isl6421_attach, fe0->dvb.frontend, &dev->i2c_adap, 1392 0x08, 0, 0) == NULL) { 1393 wprintk("%s: Lifeview Trio, No ISL6421 found!\n", __func__); 1394 goto detach_frontend; 1395 } 1396 } 1397 } 1398 break; 1399 case SAA7134_BOARD_ADS_DUO_CARDBUS_PTV331: 1400 case SAA7134_BOARD_FLYDVBT_HYBRID_CARDBUS: 1401 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1402 &ads_tech_duo_config, 1403 &dev->i2c_adap); 1404 if (fe0->dvb.frontend) { 1405 if (dvb_attach(tda827x_attach,fe0->dvb.frontend, 1406 ads_tech_duo_config.tuner_address, &dev->i2c_adap, 1407 &ads_duo_cfg) == NULL) { 1408 wprintk("no tda827x tuner found at addr: %02x\n", 1409 ads_tech_duo_config.tuner_address); 1410 goto detach_frontend; 1411 } 1412 } else 1413 wprintk("failed to attach tda10046\n"); 1414 break; 1415 case SAA7134_BOARD_TEVION_DVBT_220RF: 1416 if (configure_tda827x_fe(dev, &tevion_dvbt220rf_config, 1417 &tda827x_cfg_0) < 0) 1418 goto detach_frontend; 1419 break; 1420 case SAA7134_BOARD_MEDION_MD8800_QUADRO: 1421 if (!use_frontend) { /* terrestrial */ 1422 if (configure_tda827x_fe(dev, &md8800_dvbt_config, 1423 &tda827x_cfg_0) < 0) 1424 goto detach_frontend; 1425 } else { /* satellite */ 1426 fe0->dvb.frontend = dvb_attach(tda10086_attach, 1427 &flydvbs, &dev->i2c_adap); 1428 if (fe0->dvb.frontend) { 1429 struct dvb_frontend *fe = fe0->dvb.frontend; 1430 u8 dev_id = dev->eedata[2]; 1431 u8 data = 0xc4; 1432 struct i2c_msg msg = {.addr = 0x08, .flags = 0, .len = 1}; 1433 1434 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 1435 0x60, &dev->i2c_adap, 0) == NULL) { 1436 wprintk("%s: Medion Quadro, no tda826x " 1437 "found !\n", __func__); 1438 goto detach_frontend; 1439 } 1440 if (dev_id != 0x08) { 1441 /* we need to open the i2c gate (we know it exists) */ 1442 fe->ops.i2c_gate_ctrl(fe, 1); 1443 if (dvb_attach(isl6405_attach, fe, 1444 &dev->i2c_adap, 0x08, 0, 0) == NULL) { 1445 wprintk("%s: Medion Quadro, no ISL6405 " 1446 "found !\n", __func__); 1447 goto detach_frontend; 1448 } 1449 if (dev_id == 0x07) { 1450 /* fire up the 2nd section of the LNB supply since 1451 we can't do this from the other section */ 1452 msg.buf = &data; 1453 i2c_transfer(&dev->i2c_adap, &msg, 1); 1454 } 1455 fe->ops.i2c_gate_ctrl(fe, 0); 1456 dev->original_set_voltage = fe->ops.set_voltage; 1457 fe->ops.set_voltage = md8800_set_voltage; 1458 dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage; 1459 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage; 1460 } else { 1461 fe->ops.set_voltage = md8800_set_voltage2; 1462 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage2; 1463 } 1464 } 1465 } 1466 break; 1467 case SAA7134_BOARD_AVERMEDIA_AVERTVHD_A180: 1468 fe0->dvb.frontend = dvb_attach(nxt200x_attach, &avertvhda180, 1469 &dev->i2c_adap); 1470 if (fe0->dvb.frontend) 1471 dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x61, 1472 NULL, DVB_PLL_TDHU2); 1473 break; 1474 case SAA7134_BOARD_ADS_INSTANT_HDTV_PCI: 1475 case SAA7134_BOARD_KWORLD_ATSC110: 1476 fe0->dvb.frontend = dvb_attach(nxt200x_attach, &kworldatsc110, 1477 &dev->i2c_adap); 1478 if (fe0->dvb.frontend) 1479 dvb_attach(simple_tuner_attach, fe0->dvb.frontend, 1480 &dev->i2c_adap, 0x61, 1481 TUNER_PHILIPS_TUV1236D); 1482 break; 1483 case SAA7134_BOARD_KWORLD_PC150U: 1484 saa7134_set_gpio(dev, 18, 1); /* Switch to digital mode */ 1485 saa7134_tuner_callback(dev, 0, 1486 TDA18271_CALLBACK_CMD_AGC_ENABLE, 1); 1487 fe0->dvb.frontend = dvb_attach(s5h1411_attach, 1488 &kworld_s5h1411_config, 1489 &dev->i2c_adap); 1490 if (fe0->dvb.frontend != NULL) { 1491 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1492 &dev->i2c_adap, 0x4b, 1493 &tda829x_no_probe); 1494 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1495 0x60, &dev->i2c_adap, 1496 &kworld_pc150u_tda18271_config); 1497 } 1498 break; 1499 case SAA7134_BOARD_FLYDVBS_LR300: 1500 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, 1501 &dev->i2c_adap); 1502 if (fe0->dvb.frontend) { 1503 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60, 1504 &dev->i2c_adap, 0) == NULL) { 1505 wprintk("%s: No tda826x found!\n", __func__); 1506 goto detach_frontend; 1507 } 1508 if (dvb_attach(isl6421_attach, fe0->dvb.frontend, 1509 &dev->i2c_adap, 0x08, 0, 0) == NULL) { 1510 wprintk("%s: No ISL6421 found!\n", __func__); 1511 goto detach_frontend; 1512 } 1513 } 1514 break; 1515 case SAA7134_BOARD_ASUS_EUROPA2_HYBRID: 1516 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1517 &medion_cardbus, 1518 &dev->i2c_adap); 1519 if (fe0->dvb.frontend) { 1520 dev->original_demod_sleep = fe0->dvb.frontend->ops.sleep; 1521 fe0->dvb.frontend->ops.sleep = philips_europa_demod_sleep; 1522 1523 dvb_attach(simple_tuner_attach, fe0->dvb.frontend, 1524 &dev->i2c_adap, medion_cardbus.tuner_address, 1525 TUNER_PHILIPS_FMD1216ME_MK3); 1526 } 1527 break; 1528 case SAA7134_BOARD_VIDEOMATE_DVBT_200A: 1529 fe0->dvb.frontend = dvb_attach(tda10046_attach, 1530 &philips_europa_config, 1531 &dev->i2c_adap); 1532 if (fe0->dvb.frontend) { 1533 fe0->dvb.frontend->ops.tuner_ops.init = philips_td1316_tuner_init; 1534 fe0->dvb.frontend->ops.tuner_ops.set_params = philips_td1316_tuner_set_params; 1535 } 1536 break; 1537 case SAA7134_BOARD_CINERGY_HT_PCMCIA: 1538 if (configure_tda827x_fe(dev, &cinergy_ht_config, 1539 &tda827x_cfg_0) < 0) 1540 goto detach_frontend; 1541 break; 1542 case SAA7134_BOARD_CINERGY_HT_PCI: 1543 if (configure_tda827x_fe(dev, &cinergy_ht_pci_config, 1544 &tda827x_cfg_0) < 0) 1545 goto detach_frontend; 1546 break; 1547 case SAA7134_BOARD_PHILIPS_TIGER_S: 1548 if (configure_tda827x_fe(dev, &philips_tiger_s_config, 1549 &tda827x_cfg_2) < 0) 1550 goto detach_frontend; 1551 break; 1552 case SAA7134_BOARD_ASUS_P7131_4871: 1553 if (configure_tda827x_fe(dev, &asus_p7131_4871_config, 1554 &tda827x_cfg_2) < 0) 1555 goto detach_frontend; 1556 break; 1557 case SAA7134_BOARD_ASUSTeK_P7131_HYBRID_LNA: 1558 if (configure_tda827x_fe(dev, &asus_p7131_hybrid_lna_config, 1559 &tda827x_cfg_2) < 0) 1560 goto detach_frontend; 1561 break; 1562 case SAA7134_BOARD_AVERMEDIA_SUPER_007: 1563 if (configure_tda827x_fe(dev, &avermedia_super_007_config, 1564 &tda827x_cfg_0) < 0) 1565 goto detach_frontend; 1566 break; 1567 case SAA7134_BOARD_TWINHAN_DTV_DVB_3056: 1568 if (configure_tda827x_fe(dev, &twinhan_dtv_dvb_3056_config, 1569 &tda827x_cfg_2_sw42) < 0) 1570 goto detach_frontend; 1571 break; 1572 case SAA7134_BOARD_PHILIPS_SNAKE: 1573 fe0->dvb.frontend = dvb_attach(tda10086_attach, &flydvbs, 1574 &dev->i2c_adap); 1575 if (fe0->dvb.frontend) { 1576 if (dvb_attach(tda826x_attach, fe0->dvb.frontend, 0x60, 1577 &dev->i2c_adap, 0) == NULL) { 1578 wprintk("%s: No tda826x found!\n", __func__); 1579 goto detach_frontend; 1580 } 1581 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, 1582 &dev->i2c_adap, 0, 0) == NULL) { 1583 wprintk("%s: No lnbp21 found!\n", __func__); 1584 goto detach_frontend; 1585 } 1586 } 1587 break; 1588 case SAA7134_BOARD_CREATIX_CTX953: 1589 if (configure_tda827x_fe(dev, &md8800_dvbt_config, 1590 &tda827x_cfg_0) < 0) 1591 goto detach_frontend; 1592 break; 1593 case SAA7134_BOARD_MSI_TVANYWHERE_AD11: 1594 if (configure_tda827x_fe(dev, &philips_tiger_s_config, 1595 &tda827x_cfg_2) < 0) 1596 goto detach_frontend; 1597 break; 1598 case SAA7134_BOARD_AVERMEDIA_CARDBUS_506: 1599 dprintk("AverMedia E506R dvb setup\n"); 1600 saa7134_set_gpio(dev, 25, 0); 1601 msleep(10); 1602 saa7134_set_gpio(dev, 25, 1); 1603 fe0->dvb.frontend = dvb_attach(mt352_attach, 1604 &avermedia_xc3028_mt352_dev, 1605 &dev->i2c_adap); 1606 attach_xc3028 = 1; 1607 break; 1608 case SAA7134_BOARD_MD7134_BRIDGE_2: 1609 fe0->dvb.frontend = dvb_attach(tda10086_attach, 1610 &sd1878_4m, &dev->i2c_adap); 1611 if (fe0->dvb.frontend) { 1612 struct dvb_frontend *fe; 1613 if (dvb_attach(dvb_pll_attach, fe0->dvb.frontend, 0x60, 1614 &dev->i2c_adap, DVB_PLL_PHILIPS_SD1878_TDA8261) == NULL) { 1615 wprintk("%s: MD7134 DVB-S, no SD1878 " 1616 "found !\n", __func__); 1617 goto detach_frontend; 1618 } 1619 /* we need to open the i2c gate (we know it exists) */ 1620 fe = fe0->dvb.frontend; 1621 fe->ops.i2c_gate_ctrl(fe, 1); 1622 if (dvb_attach(isl6405_attach, fe, 1623 &dev->i2c_adap, 0x08, 0, 0) == NULL) { 1624 wprintk("%s: MD7134 DVB-S, no ISL6405 " 1625 "found !\n", __func__); 1626 goto detach_frontend; 1627 } 1628 fe->ops.i2c_gate_ctrl(fe, 0); 1629 dev->original_set_voltage = fe->ops.set_voltage; 1630 fe->ops.set_voltage = md8800_set_voltage; 1631 dev->original_set_high_voltage = fe->ops.enable_high_lnb_voltage; 1632 fe->ops.enable_high_lnb_voltage = md8800_set_high_voltage; 1633 } 1634 break; 1635 case SAA7134_BOARD_AVERMEDIA_M103: 1636 saa7134_set_gpio(dev, 25, 0); 1637 msleep(10); 1638 saa7134_set_gpio(dev, 25, 1); 1639 fe0->dvb.frontend = dvb_attach(mt352_attach, 1640 &avermedia_xc3028_mt352_dev, 1641 &dev->i2c_adap); 1642 attach_xc3028 = 1; 1643 break; 1644 case SAA7134_BOARD_ASUSTeK_TIGER_3IN1: 1645 if (!use_frontend) { /* terrestrial */ 1646 if (configure_tda827x_fe(dev, &asus_tiger_3in1_config, 1647 &tda827x_cfg_2) < 0) 1648 goto detach_frontend; 1649 } else { /* satellite */ 1650 fe0->dvb.frontend = dvb_attach(tda10086_attach, 1651 &flydvbs, &dev->i2c_adap); 1652 if (fe0->dvb.frontend) { 1653 if (dvb_attach(tda826x_attach, 1654 fe0->dvb.frontend, 0x60, 1655 &dev->i2c_adap, 0) == NULL) { 1656 wprintk("%s: Asus Tiger 3in1, no " 1657 "tda826x found!\n", __func__); 1658 goto detach_frontend; 1659 } 1660 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, 1661 &dev->i2c_adap, 0, 0) == NULL) { 1662 wprintk("%s: Asus Tiger 3in1, no lnbp21" 1663 " found!\n", __func__); 1664 goto detach_frontend; 1665 } 1666 } 1667 } 1668 break; 1669 case SAA7134_BOARD_ASUSTeK_PS3_100: 1670 if (!use_frontend) { /* terrestrial */ 1671 if (configure_tda827x_fe(dev, &asus_ps3_100_config, 1672 &tda827x_cfg_2) < 0) 1673 goto detach_frontend; 1674 } else { /* satellite */ 1675 fe0->dvb.frontend = dvb_attach(tda10086_attach, 1676 &flydvbs, &dev->i2c_adap); 1677 if (fe0->dvb.frontend) { 1678 if (dvb_attach(tda826x_attach, 1679 fe0->dvb.frontend, 0x60, 1680 &dev->i2c_adap, 0) == NULL) { 1681 wprintk("%s: Asus My Cinema PS3-100, no " 1682 "tda826x found!\n", __func__); 1683 goto detach_frontend; 1684 } 1685 if (dvb_attach(lnbp21_attach, fe0->dvb.frontend, 1686 &dev->i2c_adap, 0, 0) == NULL) { 1687 wprintk("%s: Asus My Cinema PS3-100, no lnbp21" 1688 " found!\n", __func__); 1689 goto detach_frontend; 1690 } 1691 } 1692 } 1693 break; 1694 case SAA7134_BOARD_ASUSTeK_TIGER: 1695 if (configure_tda827x_fe(dev, &philips_tiger_config, 1696 &tda827x_cfg_0) < 0) 1697 goto detach_frontend; 1698 break; 1699 case SAA7134_BOARD_BEHOLD_H6: 1700 fe0->dvb.frontend = dvb_attach(zl10353_attach, 1701 &behold_h6_config, 1702 &dev->i2c_adap); 1703 if (fe0->dvb.frontend) { 1704 dvb_attach(simple_tuner_attach, fe0->dvb.frontend, 1705 &dev->i2c_adap, 0x61, 1706 TUNER_PHILIPS_FMD1216MEX_MK3); 1707 } 1708 break; 1709 case SAA7134_BOARD_BEHOLD_X7: 1710 fe0->dvb.frontend = dvb_attach(zl10353_attach, 1711 &behold_x7_config, 1712 &dev->i2c_adap); 1713 if (fe0->dvb.frontend) { 1714 dvb_attach(xc5000_attach, fe0->dvb.frontend, 1715 &dev->i2c_adap, &behold_x7_tunerconfig); 1716 } 1717 break; 1718 case SAA7134_BOARD_BEHOLD_H7: 1719 fe0->dvb.frontend = dvb_attach(zl10353_attach, 1720 &behold_x7_config, 1721 &dev->i2c_adap); 1722 if (fe0->dvb.frontend) { 1723 dvb_attach(xc5000_attach, fe0->dvb.frontend, 1724 &dev->i2c_adap, &behold_x7_tunerconfig); 1725 } 1726 break; 1727 case SAA7134_BOARD_AVERMEDIA_A700_PRO: 1728 case SAA7134_BOARD_AVERMEDIA_A700_HYBRID: 1729 /* Zarlink ZL10313 */ 1730 fe0->dvb.frontend = dvb_attach(mt312_attach, 1731 &avertv_a700_mt312, &dev->i2c_adap); 1732 if (fe0->dvb.frontend) { 1733 if (dvb_attach(zl10036_attach, fe0->dvb.frontend, 1734 &avertv_a700_tuner, &dev->i2c_adap) == NULL) { 1735 wprintk("%s: No zl10036 found!\n", 1736 __func__); 1737 } 1738 } 1739 break; 1740 case SAA7134_BOARD_VIDEOMATE_S350: 1741 fe0->dvb.frontend = dvb_attach(mt312_attach, 1742 &zl10313_compro_s350_config, &dev->i2c_adap); 1743 if (fe0->dvb.frontend) 1744 if (dvb_attach(zl10039_attach, fe0->dvb.frontend, 1745 0x60, &dev->i2c_adap) == NULL) 1746 wprintk("%s: No zl10039 found!\n", 1747 __func__); 1748 1749 break; 1750 case SAA7134_BOARD_VIDEOMATE_T750: 1751 fe0->dvb.frontend = dvb_attach(zl10353_attach, 1752 &videomate_t750_zl10353_config, 1753 &dev->i2c_adap); 1754 if (fe0->dvb.frontend != NULL) { 1755 if (dvb_attach(qt1010_attach, 1756 fe0->dvb.frontend, 1757 &dev->i2c_adap, 1758 &videomate_t750_qt1010_config) == NULL) 1759 wprintk("error attaching QT1010\n"); 1760 } 1761 break; 1762 case SAA7134_BOARD_ZOLID_HYBRID_PCI: 1763 fe0->dvb.frontend = dvb_attach(tda10048_attach, 1764 &zolid_tda10048_config, 1765 &dev->i2c_adap); 1766 if (fe0->dvb.frontend != NULL) { 1767 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1768 &dev->i2c_adap, 0x4b, 1769 &tda829x_no_probe); 1770 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1771 0x60, &dev->i2c_adap, 1772 &zolid_tda18271_config); 1773 } 1774 break; 1775 case SAA7134_BOARD_LEADTEK_WINFAST_DTV1000S: 1776 fe0->dvb.frontend = dvb_attach(tda10048_attach, 1777 &dtv1000s_tda10048_config, 1778 &dev->i2c_adap); 1779 if (fe0->dvb.frontend != NULL) { 1780 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1781 &dev->i2c_adap, 0x4b, 1782 &tda829x_no_probe); 1783 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1784 0x60, &dev->i2c_adap, 1785 &dtv1000s_tda18271_config); 1786 } 1787 break; 1788 case SAA7134_BOARD_KWORLD_PCI_SBTVD_FULLSEG: 1789 /* Switch to digital mode */ 1790 saa7134_tuner_callback(dev, 0, 1791 TDA18271_CALLBACK_CMD_AGC_ENABLE, 1); 1792 fe0->dvb.frontend = dvb_attach(mb86a20s_attach, 1793 &kworld_mb86a20s_config, 1794 &dev->i2c_adap); 1795 if (fe0->dvb.frontend != NULL) { 1796 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1797 &dev->i2c_adap, 0x4b, 1798 &tda829x_no_probe); 1799 fe0->dvb.frontend->ops.i2c_gate_ctrl = kworld_sbtvd_gate_ctrl; 1800 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1801 0x60, &dev->i2c_adap, 1802 &kworld_tda18271_config); 1803 } 1804 1805 /* mb86a20s need to use the I2C gateway */ 1806 break; 1807 case SAA7134_BOARD_MAGICPRO_PROHDTV_PRO2: 1808 fe0->dvb.frontend = dvb_attach(lgs8gxx_attach, 1809 &prohdtv_pro2_lgs8g75_config, 1810 &dev->i2c_adap); 1811 if (fe0->dvb.frontend != NULL) { 1812 dvb_attach(tda829x_attach, fe0->dvb.frontend, 1813 &dev->i2c_adap, 0x4b, 1814 &tda829x_no_probe); 1815 dvb_attach(tda18271_attach, fe0->dvb.frontend, 1816 0x60, &dev->i2c_adap, 1817 &prohdtv_pro2_tda18271_config); 1818 } 1819 break; 1820 default: 1821 wprintk("Huh? unknown DVB card?\n"); 1822 break; 1823 } 1824 1825 if (attach_xc3028) { 1826 struct dvb_frontend *fe; 1827 struct xc2028_config cfg = { 1828 .i2c_adap = &dev->i2c_adap, 1829 .i2c_addr = 0x61, 1830 }; 1831 1832 if (!fe0->dvb.frontend) 1833 goto detach_frontend; 1834 1835 fe = dvb_attach(xc2028_attach, fe0->dvb.frontend, &cfg); 1836 if (!fe) { 1837 printk(KERN_ERR "%s/2: xc3028 attach failed\n", 1838 dev->name); 1839 goto detach_frontend; 1840 } 1841 } 1842 1843 if (NULL == fe0->dvb.frontend) { 1844 printk(KERN_ERR "%s/dvb: frontend initialization failed\n", dev->name); 1845 goto detach_frontend; 1846 } 1847 /* define general-purpose callback pointer */ 1848 fe0->dvb.frontend->callback = saa7134_tuner_callback; 1849 1850 /* register everything else */ 1851 ret = videobuf_dvb_register_bus(&dev->frontends, THIS_MODULE, dev, 1852 &dev->pci->dev, adapter_nr, 0); 1853 1854 /* this sequence is necessary to make the tda1004x load its firmware 1855 * and to enter analog mode of hybrid boards 1856 */ 1857 if (!ret) { 1858 if (fe0->dvb.frontend->ops.init) 1859 fe0->dvb.frontend->ops.init(fe0->dvb.frontend); 1860 if (fe0->dvb.frontend->ops.sleep) 1861 fe0->dvb.frontend->ops.sleep(fe0->dvb.frontend); 1862 if (fe0->dvb.frontend->ops.tuner_ops.sleep) 1863 fe0->dvb.frontend->ops.tuner_ops.sleep(fe0->dvb.frontend); 1864 } 1865 return ret; 1866 1867 detach_frontend: 1868 videobuf_dvb_dealloc_frontends(&dev->frontends); 1869 return -EINVAL; 1870 } 1871 1872 static int dvb_fini(struct saa7134_dev *dev) 1873 { 1874 struct videobuf_dvb_frontend *fe0; 1875 1876 /* Get the first frontend */ 1877 fe0 = videobuf_dvb_get_frontend(&dev->frontends, 1); 1878 if (!fe0) 1879 return -EINVAL; 1880 1881 /* FIXME: I suspect that this code is bogus, since the entry for 1882 Pinnacle 300I DVB-T PAL already defines the proper init to allow 1883 the detection of mt2032 (TDA9887_PORT2_INACTIVE) 1884 */ 1885 if (dev->board == SAA7134_BOARD_PINNACLE_300I_DVBT_PAL) { 1886 struct v4l2_priv_tun_config tda9887_cfg; 1887 static int on = TDA9887_PRESENT | TDA9887_PORT2_INACTIVE; 1888 1889 tda9887_cfg.tuner = TUNER_TDA9887; 1890 tda9887_cfg.priv = &on; 1891 1892 /* otherwise we don't detect the tuner on next insmod */ 1893 saa_call_all(dev, tuner, s_config, &tda9887_cfg); 1894 } else if (dev->board == SAA7134_BOARD_MEDION_MD8800_QUADRO) { 1895 if ((dev->eedata[2] == 0x07) && use_frontend) { 1896 /* turn off the 2nd lnb supply */ 1897 u8 data = 0x80; 1898 struct i2c_msg msg = {.addr = 0x08, .buf = &data, .flags = 0, .len = 1}; 1899 struct dvb_frontend *fe; 1900 fe = fe0->dvb.frontend; 1901 if (fe->ops.i2c_gate_ctrl) { 1902 fe->ops.i2c_gate_ctrl(fe, 1); 1903 i2c_transfer(&dev->i2c_adap, &msg, 1); 1904 fe->ops.i2c_gate_ctrl(fe, 0); 1905 } 1906 } 1907 } 1908 videobuf_dvb_unregister_bus(&dev->frontends); 1909 return 0; 1910 } 1911 1912 static struct saa7134_mpeg_ops dvb_ops = { 1913 .type = SAA7134_MPEG_DVB, 1914 .init = dvb_init, 1915 .fini = dvb_fini, 1916 }; 1917 1918 static int __init dvb_register(void) 1919 { 1920 return saa7134_ts_register(&dvb_ops); 1921 } 1922 1923 static void __exit dvb_unregister(void) 1924 { 1925 saa7134_ts_unregister(&dvb_ops); 1926 } 1927 1928 module_init(dvb_register); 1929 module_exit(dvb_unregister); 1930 1931 /* ------------------------------------------------------------------ */ 1932 /* 1933 * Local variables: 1934 * c-basic-offset: 8 1935 * End: 1936 */ 1937