1 // SPDX-License-Identifier: GPL-2.0 2 /* 3 * Earthsoft PT3 driver 4 * 5 * Copyright (C) 2014 Akihiro Tsukada <tskd08@gmail.com> 6 */ 7 8 #include <linux/freezer.h> 9 #include <linux/kernel.h> 10 #include <linux/kthread.h> 11 #include <linux/mutex.h> 12 #include <linux/module.h> 13 #include <linux/pci.h> 14 #include <linux/string.h> 15 #include <linux/sched/signal.h> 16 17 #include <media/dmxdev.h> 18 #include <media/dvbdev.h> 19 #include <media/dvb_demux.h> 20 #include <media/dvb_frontend.h> 21 22 #include "pt3.h" 23 24 DVB_DEFINE_MOD_OPT_ADAPTER_NR(adapter_nr); 25 26 static bool one_adapter; 27 module_param(one_adapter, bool, 0444); 28 MODULE_PARM_DESC(one_adapter, "Place FE's together under one adapter."); 29 30 static int num_bufs = 4; 31 module_param(num_bufs, int, 0444); 32 MODULE_PARM_DESC(num_bufs, "Number of DMA buffer (188KiB) per FE."); 33 34 35 static const struct i2c_algorithm pt3_i2c_algo = { 36 .master_xfer = &pt3_i2c_master_xfer, 37 .functionality = &pt3_i2c_functionality, 38 }; 39 40 static const struct pt3_adap_config adap_conf[PT3_NUM_FE] = { 41 { 42 .demod_info = { 43 I2C_BOARD_INFO(TC90522_I2C_DEV_SAT, 0x11), 44 }, 45 .tuner_info = { 46 I2C_BOARD_INFO("qm1d1c0042", 0x63), 47 }, 48 .tuner_cfg.qm1d1c0042 = { 49 .lpf = 1, 50 }, 51 .init_freq = 1049480 - 300, 52 }, 53 { 54 .demod_info = { 55 I2C_BOARD_INFO(TC90522_I2C_DEV_TER, 0x10), 56 }, 57 .tuner_info = { 58 I2C_BOARD_INFO("mxl301rf", 0x62), 59 }, 60 .init_freq = 515142857, 61 }, 62 { 63 .demod_info = { 64 I2C_BOARD_INFO(TC90522_I2C_DEV_SAT, 0x13), 65 }, 66 .tuner_info = { 67 I2C_BOARD_INFO("qm1d1c0042", 0x60), 68 }, 69 .tuner_cfg.qm1d1c0042 = { 70 .lpf = 1, 71 }, 72 .init_freq = 1049480 + 300, 73 }, 74 { 75 .demod_info = { 76 I2C_BOARD_INFO(TC90522_I2C_DEV_TER, 0x12), 77 }, 78 .tuner_info = { 79 I2C_BOARD_INFO("mxl301rf", 0x61), 80 }, 81 .init_freq = 521142857, 82 }, 83 }; 84 85 86 struct reg_val { 87 u8 reg; 88 u8 val; 89 }; 90 91 static int 92 pt3_demod_write(struct pt3_adapter *adap, const struct reg_val *data, int num) 93 { 94 struct i2c_msg msg; 95 int i, ret; 96 97 ret = 0; 98 msg.addr = adap->i2c_demod->addr; 99 msg.flags = 0; 100 msg.len = 2; 101 for (i = 0; i < num; i++) { 102 msg.buf = (u8 *)&data[i]; 103 ret = i2c_transfer(adap->i2c_demod->adapter, &msg, 1); 104 if (ret == 0) 105 ret = -EREMOTE; 106 if (ret < 0) 107 return ret; 108 } 109 return 0; 110 } 111 112 static inline void pt3_lnb_ctrl(struct pt3_board *pt3, bool on) 113 { 114 iowrite32((on ? 0x0f : 0x0c), pt3->regs[0] + REG_SYSTEM_W); 115 } 116 117 static inline struct pt3_adapter *pt3_find_adapter(struct dvb_frontend *fe) 118 { 119 struct pt3_board *pt3; 120 int i; 121 122 if (one_adapter) { 123 pt3 = fe->dvb->priv; 124 for (i = 0; i < PT3_NUM_FE; i++) 125 if (pt3->adaps[i]->fe == fe) 126 return pt3->adaps[i]; 127 } 128 return container_of(fe->dvb, struct pt3_adapter, dvb_adap); 129 } 130 131 /* 132 * all 4 tuners in PT3 are packaged in a can module (Sharp VA4M6JC2103). 133 * it seems that they share the power lines and Amp power line and 134 * adaps[3] controls those powers. 135 */ 136 static int 137 pt3_set_tuner_power(struct pt3_board *pt3, bool tuner_on, bool amp_on) 138 { 139 struct reg_val rv = { 0x1e, 0x99 }; 140 141 if (tuner_on) 142 rv.val |= 0x40; 143 if (amp_on) 144 rv.val |= 0x04; 145 return pt3_demod_write(pt3->adaps[PT3_NUM_FE - 1], &rv, 1); 146 } 147 148 static int pt3_set_lna(struct dvb_frontend *fe) 149 { 150 struct pt3_adapter *adap; 151 struct pt3_board *pt3; 152 u32 val; 153 int ret; 154 155 /* LNA is shared btw. 2 TERR-tuners */ 156 157 adap = pt3_find_adapter(fe); 158 val = fe->dtv_property_cache.lna; 159 if (val == LNA_AUTO || val == adap->cur_lna) 160 return 0; 161 162 pt3 = adap->dvb_adap.priv; 163 if (mutex_lock_interruptible(&pt3->lock)) 164 return -ERESTARTSYS; 165 if (val) 166 pt3->lna_on_cnt++; 167 else 168 pt3->lna_on_cnt--; 169 170 if (val && pt3->lna_on_cnt <= 1) { 171 pt3->lna_on_cnt = 1; 172 ret = pt3_set_tuner_power(pt3, true, true); 173 } else if (!val && pt3->lna_on_cnt <= 0) { 174 pt3->lna_on_cnt = 0; 175 ret = pt3_set_tuner_power(pt3, true, false); 176 } else 177 ret = 0; 178 mutex_unlock(&pt3->lock); 179 adap->cur_lna = (val != 0); 180 return ret; 181 } 182 183 static int pt3_set_voltage(struct dvb_frontend *fe, enum fe_sec_voltage volt) 184 { 185 struct pt3_adapter *adap; 186 struct pt3_board *pt3; 187 bool on; 188 189 /* LNB power is shared btw. 2 SAT-tuners */ 190 191 adap = pt3_find_adapter(fe); 192 on = (volt != SEC_VOLTAGE_OFF); 193 if (on == adap->cur_lnb) 194 return 0; 195 adap->cur_lnb = on; 196 pt3 = adap->dvb_adap.priv; 197 if (mutex_lock_interruptible(&pt3->lock)) 198 return -ERESTARTSYS; 199 if (on) 200 pt3->lnb_on_cnt++; 201 else 202 pt3->lnb_on_cnt--; 203 204 if (on && pt3->lnb_on_cnt <= 1) { 205 pt3->lnb_on_cnt = 1; 206 pt3_lnb_ctrl(pt3, true); 207 } else if (!on && pt3->lnb_on_cnt <= 0) { 208 pt3->lnb_on_cnt = 0; 209 pt3_lnb_ctrl(pt3, false); 210 } 211 mutex_unlock(&pt3->lock); 212 return 0; 213 } 214 215 /* register values used in pt3_fe_init() */ 216 217 static const struct reg_val init0_sat[] = { 218 { 0x03, 0x01 }, 219 { 0x1e, 0x10 }, 220 }; 221 static const struct reg_val init0_ter[] = { 222 { 0x01, 0x40 }, 223 { 0x1c, 0x10 }, 224 }; 225 static const struct reg_val cfg_sat[] = { 226 { 0x1c, 0x15 }, 227 { 0x1f, 0x04 }, 228 }; 229 static const struct reg_val cfg_ter[] = { 230 { 0x1d, 0x01 }, 231 }; 232 233 /* 234 * pt3_fe_init: initialize demod sub modules and ISDB-T tuners all at once. 235 * 236 * As for demod IC (TC90522) and ISDB-T tuners (MxL301RF), 237 * the i2c sequences for init'ing them are not public and hidden in a ROM, 238 * and include the board specific configurations as well. 239 * They are stored in a lump and cannot be taken out / accessed separately, 240 * thus cannot be moved to the FE/tuner driver. 241 */ 242 static int pt3_fe_init(struct pt3_board *pt3) 243 { 244 int i, ret; 245 struct dvb_frontend *fe; 246 247 pt3_i2c_reset(pt3); 248 ret = pt3_init_all_demods(pt3); 249 if (ret < 0) { 250 dev_warn(&pt3->pdev->dev, "Failed to init demod chips\n"); 251 return ret; 252 } 253 254 /* additional config? */ 255 for (i = 0; i < PT3_NUM_FE; i++) { 256 fe = pt3->adaps[i]->fe; 257 258 if (fe->ops.delsys[0] == SYS_ISDBS) 259 ret = pt3_demod_write(pt3->adaps[i], 260 init0_sat, ARRAY_SIZE(init0_sat)); 261 else 262 ret = pt3_demod_write(pt3->adaps[i], 263 init0_ter, ARRAY_SIZE(init0_ter)); 264 if (ret < 0) { 265 dev_warn(&pt3->pdev->dev, 266 "demod[%d] failed in init sequence0\n", i); 267 return ret; 268 } 269 ret = fe->ops.init(fe); 270 if (ret < 0) 271 return ret; 272 } 273 274 usleep_range(2000, 4000); 275 ret = pt3_set_tuner_power(pt3, true, false); 276 if (ret < 0) { 277 dev_warn(&pt3->pdev->dev, "Failed to control tuner module\n"); 278 return ret; 279 } 280 281 /* output pin configuration */ 282 for (i = 0; i < PT3_NUM_FE; i++) { 283 fe = pt3->adaps[i]->fe; 284 if (fe->ops.delsys[0] == SYS_ISDBS) 285 ret = pt3_demod_write(pt3->adaps[i], 286 cfg_sat, ARRAY_SIZE(cfg_sat)); 287 else 288 ret = pt3_demod_write(pt3->adaps[i], 289 cfg_ter, ARRAY_SIZE(cfg_ter)); 290 if (ret < 0) { 291 dev_warn(&pt3->pdev->dev, 292 "demod[%d] failed in init sequence1\n", i); 293 return ret; 294 } 295 } 296 usleep_range(4000, 6000); 297 298 for (i = 0; i < PT3_NUM_FE; i++) { 299 fe = pt3->adaps[i]->fe; 300 if (fe->ops.delsys[0] != SYS_ISDBS) 301 continue; 302 /* init and wake-up ISDB-S tuners */ 303 ret = fe->ops.tuner_ops.init(fe); 304 if (ret < 0) { 305 dev_warn(&pt3->pdev->dev, 306 "Failed to init SAT-tuner[%d]\n", i); 307 return ret; 308 } 309 } 310 ret = pt3_init_all_mxl301rf(pt3); 311 if (ret < 0) { 312 dev_warn(&pt3->pdev->dev, "Failed to init TERR-tuners\n"); 313 return ret; 314 } 315 316 ret = pt3_set_tuner_power(pt3, true, true); 317 if (ret < 0) { 318 dev_warn(&pt3->pdev->dev, "Failed to control tuner module\n"); 319 return ret; 320 } 321 322 /* Wake up all tuners and make an initial tuning, 323 * in order to avoid interference among the tuners in the module, 324 * according to the doc from the manufacturer. 325 */ 326 for (i = 0; i < PT3_NUM_FE; i++) { 327 fe = pt3->adaps[i]->fe; 328 ret = 0; 329 if (fe->ops.delsys[0] == SYS_ISDBT) 330 ret = fe->ops.tuner_ops.init(fe); 331 /* set only when called from pt3_probe(), not resume() */ 332 if (ret == 0 && fe->dtv_property_cache.frequency == 0) { 333 fe->dtv_property_cache.frequency = 334 adap_conf[i].init_freq; 335 ret = fe->ops.tuner_ops.set_params(fe); 336 } 337 if (ret < 0) { 338 dev_warn(&pt3->pdev->dev, 339 "Failed in initial tuning of tuner[%d]\n", i); 340 return ret; 341 } 342 } 343 344 /* and sleep again, waiting to be opened by users. */ 345 for (i = 0; i < PT3_NUM_FE; i++) { 346 fe = pt3->adaps[i]->fe; 347 if (fe->ops.tuner_ops.sleep) 348 ret = fe->ops.tuner_ops.sleep(fe); 349 if (ret < 0) 350 break; 351 if (fe->ops.sleep) 352 ret = fe->ops.sleep(fe); 353 if (ret < 0) 354 break; 355 if (fe->ops.delsys[0] == SYS_ISDBS) 356 fe->ops.set_voltage = &pt3_set_voltage; 357 else 358 fe->ops.set_lna = &pt3_set_lna; 359 } 360 if (i < PT3_NUM_FE) { 361 dev_warn(&pt3->pdev->dev, "FE[%d] failed to standby\n", i); 362 return ret; 363 } 364 return 0; 365 } 366 367 368 static int pt3_attach_fe(struct pt3_board *pt3, int i) 369 { 370 const struct i2c_board_info *info; 371 struct tc90522_config cfg; 372 struct i2c_client *cl; 373 struct dvb_adapter *dvb_adap; 374 int ret; 375 376 info = &adap_conf[i].demod_info; 377 cfg = adap_conf[i].demod_cfg; 378 cfg.tuner_i2c = NULL; 379 380 ret = -ENODEV; 381 cl = dvb_module_probe("tc90522", info->type, &pt3->i2c_adap, 382 info->addr, &cfg); 383 if (!cl) 384 return -ENODEV; 385 pt3->adaps[i]->i2c_demod = cl; 386 387 if (!strncmp(cl->name, TC90522_I2C_DEV_SAT, 388 strlen(TC90522_I2C_DEV_SAT))) { 389 struct qm1d1c0042_config tcfg; 390 391 tcfg = adap_conf[i].tuner_cfg.qm1d1c0042; 392 tcfg.fe = cfg.fe; 393 info = &adap_conf[i].tuner_info; 394 cl = dvb_module_probe("qm1d1c0042", info->type, cfg.tuner_i2c, 395 info->addr, &tcfg); 396 } else { 397 struct mxl301rf_config tcfg; 398 399 tcfg = adap_conf[i].tuner_cfg.mxl301rf; 400 tcfg.fe = cfg.fe; 401 info = &adap_conf[i].tuner_info; 402 cl = dvb_module_probe("mxl301rf", info->type, cfg.tuner_i2c, 403 info->addr, &tcfg); 404 } 405 if (!cl) 406 goto err_demod_module_release; 407 pt3->adaps[i]->i2c_tuner = cl; 408 409 dvb_adap = &pt3->adaps[one_adapter ? 0 : i]->dvb_adap; 410 ret = dvb_register_frontend(dvb_adap, cfg.fe); 411 if (ret < 0) 412 goto err_tuner_module_release; 413 pt3->adaps[i]->fe = cfg.fe; 414 return 0; 415 416 err_tuner_module_release: 417 dvb_module_release(pt3->adaps[i]->i2c_tuner); 418 err_demod_module_release: 419 dvb_module_release(pt3->adaps[i]->i2c_demod); 420 421 return ret; 422 } 423 424 425 static int pt3_fetch_thread(void *data) 426 { 427 struct pt3_adapter *adap = data; 428 ktime_t delay; 429 bool was_frozen; 430 431 #define PT3_INITIAL_BUF_DROPS 4 432 #define PT3_FETCH_DELAY 10 433 #define PT3_FETCH_DELAY_DELTA 2 434 435 pt3_init_dmabuf(adap); 436 adap->num_discard = PT3_INITIAL_BUF_DROPS; 437 438 dev_dbg(adap->dvb_adap.device, "PT3: [%s] started\n", 439 adap->thread->comm); 440 set_freezable(); 441 while (!kthread_freezable_should_stop(&was_frozen)) { 442 if (was_frozen) 443 adap->num_discard = PT3_INITIAL_BUF_DROPS; 444 445 pt3_proc_dma(adap); 446 447 delay = ktime_set(0, PT3_FETCH_DELAY * NSEC_PER_MSEC); 448 set_current_state(TASK_UNINTERRUPTIBLE|TASK_FREEZABLE); 449 schedule_hrtimeout_range(&delay, 450 PT3_FETCH_DELAY_DELTA * NSEC_PER_MSEC, 451 HRTIMER_MODE_REL); 452 } 453 dev_dbg(adap->dvb_adap.device, "PT3: [%s] exited\n", 454 adap->thread->comm); 455 return 0; 456 } 457 458 static int pt3_start_streaming(struct pt3_adapter *adap) 459 { 460 struct task_struct *thread; 461 462 /* start fetching thread */ 463 thread = kthread_run(pt3_fetch_thread, adap, "pt3-ad%i-dmx%i", 464 adap->dvb_adap.num, adap->dmxdev.dvbdev->id); 465 if (IS_ERR(thread)) { 466 int ret = PTR_ERR(thread); 467 468 adap->thread = NULL; 469 dev_warn(adap->dvb_adap.device, 470 "PT3 (adap:%d, dmx:%d): failed to start kthread\n", 471 adap->dvb_adap.num, adap->dmxdev.dvbdev->id); 472 return ret; 473 } 474 adap->thread = thread; 475 476 return pt3_start_dma(adap); 477 } 478 479 static int pt3_stop_streaming(struct pt3_adapter *adap) 480 { 481 int ret; 482 483 ret = pt3_stop_dma(adap); 484 if (ret) 485 dev_warn(adap->dvb_adap.device, 486 "PT3: failed to stop streaming of adap:%d/FE:%d\n", 487 adap->dvb_adap.num, adap->fe->id); 488 489 /* kill the fetching thread */ 490 ret = kthread_stop(adap->thread); 491 adap->thread = NULL; 492 return ret; 493 } 494 495 static int pt3_start_feed(struct dvb_demux_feed *feed) 496 { 497 struct pt3_adapter *adap; 498 499 if (signal_pending(current)) 500 return -EINTR; 501 502 adap = container_of(feed->demux, struct pt3_adapter, demux); 503 adap->num_feeds++; 504 if (adap->num_feeds > 1) 505 return 0; 506 507 return pt3_start_streaming(adap); 508 509 } 510 511 static int pt3_stop_feed(struct dvb_demux_feed *feed) 512 { 513 struct pt3_adapter *adap; 514 515 adap = container_of(feed->demux, struct pt3_adapter, demux); 516 517 adap->num_feeds--; 518 if (adap->num_feeds > 0 || !adap->thread) 519 return 0; 520 adap->num_feeds = 0; 521 522 return pt3_stop_streaming(adap); 523 } 524 525 526 static int pt3_alloc_adapter(struct pt3_board *pt3, int index) 527 { 528 int ret; 529 struct pt3_adapter *adap; 530 struct dvb_adapter *da; 531 532 adap = kzalloc(sizeof(*adap), GFP_KERNEL); 533 if (!adap) 534 return -ENOMEM; 535 536 pt3->adaps[index] = adap; 537 adap->adap_idx = index; 538 539 if (index == 0 || !one_adapter) { 540 ret = dvb_register_adapter(&adap->dvb_adap, "PT3 DVB", 541 THIS_MODULE, &pt3->pdev->dev, adapter_nr); 542 if (ret < 0) { 543 dev_err(&pt3->pdev->dev, 544 "failed to register adapter dev\n"); 545 goto err_mem; 546 } 547 da = &adap->dvb_adap; 548 } else 549 da = &pt3->adaps[0]->dvb_adap; 550 551 adap->dvb_adap.priv = pt3; 552 adap->demux.dmx.capabilities = DMX_TS_FILTERING | DMX_SECTION_FILTERING; 553 adap->demux.priv = adap; 554 adap->demux.feednum = 256; 555 adap->demux.filternum = 256; 556 adap->demux.start_feed = pt3_start_feed; 557 adap->demux.stop_feed = pt3_stop_feed; 558 ret = dvb_dmx_init(&adap->demux); 559 if (ret < 0) { 560 dev_err(&pt3->pdev->dev, "failed to init dmx dev\n"); 561 goto err_adap; 562 } 563 564 adap->dmxdev.filternum = 256; 565 adap->dmxdev.demux = &adap->demux.dmx; 566 ret = dvb_dmxdev_init(&adap->dmxdev, da); 567 if (ret < 0) { 568 dev_err(&pt3->pdev->dev, "failed to init dmxdev\n"); 569 goto err_demux; 570 } 571 572 ret = pt3_alloc_dmabuf(adap); 573 if (ret) { 574 dev_err(&pt3->pdev->dev, "failed to alloc DMA buffers\n"); 575 goto err_dmabuf; 576 } 577 578 return 0; 579 580 err_dmabuf: 581 pt3_free_dmabuf(adap); 582 dvb_dmxdev_release(&adap->dmxdev); 583 err_demux: 584 dvb_dmx_release(&adap->demux); 585 err_adap: 586 if (index == 0 || !one_adapter) 587 dvb_unregister_adapter(da); 588 err_mem: 589 kfree(adap); 590 pt3->adaps[index] = NULL; 591 return ret; 592 } 593 594 static void pt3_cleanup_adapter(struct pt3_board *pt3, int index) 595 { 596 struct pt3_adapter *adap; 597 struct dmx_demux *dmx; 598 599 adap = pt3->adaps[index]; 600 if (adap == NULL) 601 return; 602 603 /* stop demux kthread */ 604 if (adap->thread) 605 pt3_stop_streaming(adap); 606 607 dmx = &adap->demux.dmx; 608 dmx->close(dmx); 609 if (adap->fe) { 610 adap->fe->callback = NULL; 611 if (adap->fe->frontend_priv) 612 dvb_unregister_frontend(adap->fe); 613 dvb_module_release(adap->i2c_tuner); 614 dvb_module_release(adap->i2c_demod); 615 } 616 pt3_free_dmabuf(adap); 617 dvb_dmxdev_release(&adap->dmxdev); 618 dvb_dmx_release(&adap->demux); 619 if (index == 0 || !one_adapter) 620 dvb_unregister_adapter(&adap->dvb_adap); 621 kfree(adap); 622 pt3->adaps[index] = NULL; 623 } 624 625 #ifdef CONFIG_PM_SLEEP 626 627 static int pt3_suspend(struct device *dev) 628 { 629 struct pt3_board *pt3 = dev_get_drvdata(dev); 630 int i; 631 struct pt3_adapter *adap; 632 633 for (i = 0; i < PT3_NUM_FE; i++) { 634 adap = pt3->adaps[i]; 635 if (adap->num_feeds > 0) 636 pt3_stop_dma(adap); 637 dvb_frontend_suspend(adap->fe); 638 pt3_free_dmabuf(adap); 639 } 640 641 pt3_lnb_ctrl(pt3, false); 642 pt3_set_tuner_power(pt3, false, false); 643 return 0; 644 } 645 646 static int pt3_resume(struct device *dev) 647 { 648 struct pt3_board *pt3 = dev_get_drvdata(dev); 649 int i, ret; 650 struct pt3_adapter *adap; 651 652 ret = pt3_fe_init(pt3); 653 if (ret) 654 return ret; 655 656 if (pt3->lna_on_cnt > 0) 657 pt3_set_tuner_power(pt3, true, true); 658 if (pt3->lnb_on_cnt > 0) 659 pt3_lnb_ctrl(pt3, true); 660 661 for (i = 0; i < PT3_NUM_FE; i++) { 662 adap = pt3->adaps[i]; 663 dvb_frontend_resume(adap->fe); 664 ret = pt3_alloc_dmabuf(adap); 665 if (ret) { 666 dev_err(&pt3->pdev->dev, "failed to alloc DMA bufs\n"); 667 continue; 668 } 669 if (adap->num_feeds > 0) 670 pt3_start_dma(adap); 671 } 672 673 return 0; 674 } 675 676 #endif /* CONFIG_PM_SLEEP */ 677 678 679 static void pt3_remove(struct pci_dev *pdev) 680 { 681 struct pt3_board *pt3; 682 int i; 683 684 pt3 = pci_get_drvdata(pdev); 685 for (i = PT3_NUM_FE - 1; i >= 0; i--) 686 pt3_cleanup_adapter(pt3, i); 687 i2c_del_adapter(&pt3->i2c_adap); 688 } 689 690 static int pt3_probe(struct pci_dev *pdev, const struct pci_device_id *ent) 691 { 692 u8 rev; 693 u32 ver; 694 int i, ret; 695 struct pt3_board *pt3; 696 struct i2c_adapter *i2c; 697 698 if (pci_read_config_byte(pdev, PCI_REVISION_ID, &rev) || rev != 1) 699 return -ENODEV; 700 701 ret = pcim_enable_device(pdev); 702 if (ret < 0) 703 return -ENODEV; 704 pci_set_master(pdev); 705 706 ret = pcim_iomap_regions(pdev, BIT(0) | BIT(2), DRV_NAME); 707 if (ret < 0) 708 return ret; 709 710 ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(64)); 711 if (ret == 0) 712 dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(64)); 713 else { 714 ret = dma_set_mask(&pdev->dev, DMA_BIT_MASK(32)); 715 if (ret == 0) 716 dma_set_coherent_mask(&pdev->dev, DMA_BIT_MASK(32)); 717 else { 718 dev_err(&pdev->dev, "Failed to set DMA mask\n"); 719 return ret; 720 } 721 dev_info(&pdev->dev, "Use 32bit DMA\n"); 722 } 723 724 pt3 = devm_kzalloc(&pdev->dev, sizeof(*pt3), GFP_KERNEL); 725 if (!pt3) 726 return -ENOMEM; 727 pci_set_drvdata(pdev, pt3); 728 pt3->pdev = pdev; 729 mutex_init(&pt3->lock); 730 pt3->regs[0] = pcim_iomap_table(pdev)[0]; 731 pt3->regs[1] = pcim_iomap_table(pdev)[2]; 732 733 ver = ioread32(pt3->regs[0] + REG_VERSION); 734 if ((ver >> 16) != 0x0301) { 735 dev_warn(&pdev->dev, "PT%d, I/F-ver.:%d not supported\n", 736 ver >> 24, (ver & 0x00ff0000) >> 16); 737 return -ENODEV; 738 } 739 740 pt3->num_bufs = clamp_val(num_bufs, MIN_DATA_BUFS, MAX_DATA_BUFS); 741 742 pt3->i2c_buf = devm_kmalloc(&pdev->dev, sizeof(*pt3->i2c_buf), GFP_KERNEL); 743 if (!pt3->i2c_buf) 744 return -ENOMEM; 745 i2c = &pt3->i2c_adap; 746 i2c->owner = THIS_MODULE; 747 i2c->algo = &pt3_i2c_algo; 748 i2c->algo_data = NULL; 749 i2c->dev.parent = &pdev->dev; 750 strscpy(i2c->name, DRV_NAME, sizeof(i2c->name)); 751 i2c_set_adapdata(i2c, pt3); 752 ret = i2c_add_adapter(i2c); 753 if (ret < 0) 754 return ret; 755 756 for (i = 0; i < PT3_NUM_FE; i++) { 757 ret = pt3_alloc_adapter(pt3, i); 758 if (ret < 0) 759 break; 760 761 ret = pt3_attach_fe(pt3, i); 762 if (ret < 0) 763 break; 764 } 765 if (i < PT3_NUM_FE) { 766 dev_err(&pdev->dev, "Failed to create FE%d\n", i); 767 goto err_cleanup_adapters; 768 } 769 770 ret = pt3_fe_init(pt3); 771 if (ret < 0) { 772 dev_err(&pdev->dev, "Failed to init frontends\n"); 773 i = PT3_NUM_FE - 1; 774 goto err_cleanup_adapters; 775 } 776 777 dev_info(&pdev->dev, 778 "successfully init'ed PT%d (fw:0x%02x, I/F:0x%02x)\n", 779 ver >> 24, (ver >> 8) & 0xff, (ver >> 16) & 0xff); 780 return 0; 781 782 err_cleanup_adapters: 783 while (i >= 0) 784 pt3_cleanup_adapter(pt3, i--); 785 i2c_del_adapter(i2c); 786 return ret; 787 } 788 789 static const struct pci_device_id pt3_id_table[] = { 790 { PCI_DEVICE_SUB(0x1172, 0x4c15, 0xee8d, 0x0368) }, 791 { }, 792 }; 793 MODULE_DEVICE_TABLE(pci, pt3_id_table); 794 795 static SIMPLE_DEV_PM_OPS(pt3_pm_ops, pt3_suspend, pt3_resume); 796 797 static struct pci_driver pt3_driver = { 798 .name = DRV_NAME, 799 .probe = pt3_probe, 800 .remove = pt3_remove, 801 .id_table = pt3_id_table, 802 803 .driver.pm = &pt3_pm_ops, 804 }; 805 806 module_pci_driver(pt3_driver); 807 808 MODULE_DESCRIPTION("Earthsoft PT3 Driver"); 809 MODULE_AUTHOR("Akihiro TSUKADA"); 810 MODULE_LICENSE("GPL"); 811