1 /* 2 Mantis PCI bridge driver 3 4 Copyright (C) Manu Abraham (abraham.manu@gmail.com) 5 6 This program is free software; you can redistribute it and/or modify 7 it under the terms of the GNU General Public License as published by 8 the Free Software Foundation; either version 2 of the License, or 9 (at your option) any later version. 10 11 This program is distributed in the hope that it will be useful, 12 but WITHOUT ANY WARRANTY; without even the implied warranty of 13 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 14 GNU General Public License for more details. 15 16 You should have received a copy of the GNU General Public License 17 along with this program; if not, write to the Free Software 18 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 19 */ 20 21 #include <linux/kernel.h> 22 #include <linux/spinlock.h> 23 #include <asm/io.h> 24 25 #include <linux/signal.h> 26 #include <linux/sched.h> 27 #include <linux/interrupt.h> 28 #include <linux/pci.h> 29 30 #include "dmxdev.h" 31 #include "dvbdev.h" 32 #include "dvb_demux.h" 33 #include "dvb_frontend.h" 34 #include "dvb_net.h" 35 36 #include "mantis_common.h" 37 #include "mantis_reg.h" 38 #include "mantis_uart.h" 39 #include "mantis_input.h" 40 41 struct mantis_uart_params { 42 enum mantis_baud baud_rate; 43 enum mantis_parity parity; 44 }; 45 46 static struct { 47 char string[7]; 48 } rates[5] = { 49 { "9600" }, 50 { "19200" }, 51 { "38400" }, 52 { "57600" }, 53 { "115200" } 54 }; 55 56 static struct { 57 char string[5]; 58 } parity[3] = { 59 { "NONE" }, 60 { "ODD" }, 61 { "EVEN" } 62 }; 63 64 static void mantis_uart_read(struct mantis_pci *mantis) 65 { 66 struct mantis_hwconfig *config = mantis->hwconfig; 67 int i, scancode = 0, err = 0; 68 69 /* get data */ 70 dprintk(MANTIS_DEBUG, 1, "UART Reading ..."); 71 for (i = 0; i < (config->bytes + 1); i++) { 72 int data = mmread(MANTIS_UART_RXD); 73 74 dprintk(MANTIS_DEBUG, 0, " <%02x>", data); 75 76 scancode = (scancode << 8) | (data & 0x3f); 77 err |= data; 78 79 if (data & (1 << 7)) 80 dprintk(MANTIS_ERROR, 1, "UART framing error"); 81 82 if (data & (1 << 6)) 83 dprintk(MANTIS_ERROR, 1, "UART parity error"); 84 } 85 dprintk(MANTIS_DEBUG, 0, "\n"); 86 87 if ((err & 0xC0) == 0) 88 mantis_input_process(mantis, scancode); 89 } 90 91 static void mantis_uart_work(struct work_struct *work) 92 { 93 struct mantis_pci *mantis = container_of(work, struct mantis_pci, uart_work); 94 u32 stat; 95 96 stat = mmread(MANTIS_UART_STAT); 97 98 if (stat & MANTIS_UART_RXFIFO_FULL) 99 dprintk(MANTIS_ERROR, 1, "RX Fifo FULL"); 100 101 /* 102 * MANTIS_UART_RXFIFO_DATA is only set if at least 103 * config->bytes + 1 bytes are in the FIFO. 104 */ 105 while (stat & MANTIS_UART_RXFIFO_DATA) { 106 mantis_uart_read(mantis); 107 stat = mmread(MANTIS_UART_STAT); 108 } 109 110 /* re-enable UART (RX) interrupt */ 111 mantis_unmask_ints(mantis, MANTIS_INT_IRQ1); 112 } 113 114 static int mantis_uart_setup(struct mantis_pci *mantis, 115 struct mantis_uart_params *params) 116 { 117 u32 reg; 118 119 mmwrite((mmread(MANTIS_UART_CTL) | (params->parity & 0x3)), MANTIS_UART_CTL); 120 121 reg = mmread(MANTIS_UART_BAUD); 122 123 switch (params->baud_rate) { 124 case MANTIS_BAUD_9600: 125 reg |= 0xd8; 126 break; 127 case MANTIS_BAUD_19200: 128 reg |= 0x6c; 129 break; 130 case MANTIS_BAUD_38400: 131 reg |= 0x36; 132 break; 133 case MANTIS_BAUD_57600: 134 reg |= 0x23; 135 break; 136 case MANTIS_BAUD_115200: 137 reg |= 0x11; 138 break; 139 default: 140 return -EINVAL; 141 } 142 143 mmwrite(reg, MANTIS_UART_BAUD); 144 145 return 0; 146 } 147 148 int mantis_uart_init(struct mantis_pci *mantis) 149 { 150 struct mantis_hwconfig *config = mantis->hwconfig; 151 struct mantis_uart_params params; 152 153 /* default parity: */ 154 params.baud_rate = config->baud_rate; 155 params.parity = config->parity; 156 dprintk(MANTIS_INFO, 1, "Initializing UART @ %sbps parity:%s", 157 rates[params.baud_rate].string, 158 parity[params.parity].string); 159 160 INIT_WORK(&mantis->uart_work, mantis_uart_work); 161 162 /* disable interrupt */ 163 mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL); 164 165 mantis_uart_setup(mantis, ¶ms); 166 167 /* default 1 byte */ 168 mmwrite((mmread(MANTIS_UART_BAUD) | (config->bytes << 8)), MANTIS_UART_BAUD); 169 170 /* flush buffer */ 171 mmwrite((mmread(MANTIS_UART_CTL) | MANTIS_UART_RXFLUSH), MANTIS_UART_CTL); 172 173 /* enable interrupt */ 174 mmwrite(mmread(MANTIS_UART_CTL) | MANTIS_UART_RXINT, MANTIS_UART_CTL); 175 mantis_unmask_ints(mantis, MANTIS_INT_IRQ1); 176 177 schedule_work(&mantis->uart_work); 178 dprintk(MANTIS_DEBUG, 1, "UART successfully initialized"); 179 180 return 0; 181 } 182 EXPORT_SYMBOL_GPL(mantis_uart_init); 183 184 void mantis_uart_exit(struct mantis_pci *mantis) 185 { 186 /* disable interrupt */ 187 mantis_mask_ints(mantis, MANTIS_INT_IRQ1); 188 mmwrite(mmread(MANTIS_UART_CTL) & 0xffef, MANTIS_UART_CTL); 189 flush_work(&mantis->uart_work); 190 } 191 EXPORT_SYMBOL_GPL(mantis_uart_exit); 192