xref: /openbmc/linux/drivers/media/pci/dt3155/dt3155.c (revision e7bae9bb)
1 // SPDX-License-Identifier: GPL-2.0-or-later
2 /***************************************************************************
3  *   Copyright (C) 2006-2010 by Marin Mitov                                *
4  *   mitov@issp.bas.bg                                                     *
5  *                                                                         *
6  *                                                                         *
7  ***************************************************************************/
8 
9 #include <linux/module.h>
10 #include <linux/stringify.h>
11 #include <linux/delay.h>
12 #include <linux/kthread.h>
13 #include <linux/slab.h>
14 #include <media/v4l2-dev.h>
15 #include <media/v4l2-ioctl.h>
16 #include <media/v4l2-common.h>
17 #include <media/videobuf2-dma-contig.h>
18 
19 #include "dt3155.h"
20 
21 #define DT3155_DEVICE_ID 0x1223
22 
23 /**
24  * read_i2c_reg - reads an internal i2c register
25  *
26  * @addr:	dt3155 mmio base address
27  * @index:	index (internal address) of register to read
28  * @data:	pointer to byte the read data will be placed in
29  *
30  * returns:	zero on success or error code
31  *
32  * This function starts reading the specified (by index) register
33  * and busy waits for the process to finish. The result is placed
34  * in a byte pointed by data.
35  */
36 static int read_i2c_reg(void __iomem *addr, u8 index, u8 *data)
37 {
38 	u32 tmp = index;
39 
40 	iowrite32((tmp << 17) | IIC_READ, addr + IIC_CSR2);
41 	udelay(45); /* wait at least 43 usec for NEW_CYCLE to clear */
42 	if (ioread32(addr + IIC_CSR2) & NEW_CYCLE)
43 		return -EIO; /* error: NEW_CYCLE not cleared */
44 	tmp = ioread32(addr + IIC_CSR1);
45 	if (tmp & DIRECT_ABORT) {
46 		/* reset DIRECT_ABORT bit */
47 		iowrite32(DIRECT_ABORT, addr + IIC_CSR1);
48 		return -EIO; /* error: DIRECT_ABORT set */
49 	}
50 	*data = tmp >> 24;
51 	return 0;
52 }
53 
54 /**
55  * write_i2c_reg - writes to an internal i2c register
56  *
57  * @addr:	dt3155 mmio base address
58  * @index:	index (internal address) of register to read
59  * @data:	data to be written
60  *
61  * returns:	zero on success or error code
62  *
63  * This function starts writing the specified (by index) register
64  * and busy waits for the process to finish.
65  */
66 static int write_i2c_reg(void __iomem *addr, u8 index, u8 data)
67 {
68 	u32 tmp = index;
69 
70 	iowrite32((tmp << 17) | IIC_WRITE | data, addr + IIC_CSR2);
71 	udelay(65); /* wait at least 63 usec for NEW_CYCLE to clear */
72 	if (ioread32(addr + IIC_CSR2) & NEW_CYCLE)
73 		return -EIO; /* error: NEW_CYCLE not cleared */
74 	if (ioread32(addr + IIC_CSR1) & DIRECT_ABORT) {
75 		/* reset DIRECT_ABORT bit */
76 		iowrite32(DIRECT_ABORT, addr + IIC_CSR1);
77 		return -EIO; /* error: DIRECT_ABORT set */
78 	}
79 	return 0;
80 }
81 
82 /**
83  * write_i2c_reg_nowait - writes to an internal i2c register
84  *
85  * @addr:	dt3155 mmio base address
86  * @index:	index (internal address) of register to read
87  * @data:	data to be written
88  *
89  * This function starts writing the specified (by index) register
90  * and then returns.
91  */
92 static void write_i2c_reg_nowait(void __iomem *addr, u8 index, u8 data)
93 {
94 	u32 tmp = index;
95 
96 	iowrite32((tmp << 17) | IIC_WRITE | data, addr + IIC_CSR2);
97 }
98 
99 /**
100  * wait_i2c_reg - waits the read/write to finish
101  *
102  * @addr:	dt3155 mmio base address
103  *
104  * returns:	zero on success or error code
105  *
106  * This function waits reading/writing to finish.
107  */
108 static int wait_i2c_reg(void __iomem *addr)
109 {
110 	if (ioread32(addr + IIC_CSR2) & NEW_CYCLE)
111 		udelay(65); /* wait at least 63 usec for NEW_CYCLE to clear */
112 	if (ioread32(addr + IIC_CSR2) & NEW_CYCLE)
113 		return -EIO; /* error: NEW_CYCLE not cleared */
114 	if (ioread32(addr + IIC_CSR1) & DIRECT_ABORT) {
115 		/* reset DIRECT_ABORT bit */
116 		iowrite32(DIRECT_ABORT, addr + IIC_CSR1);
117 		return -EIO; /* error: DIRECT_ABORT set */
118 	}
119 	return 0;
120 }
121 
122 static int
123 dt3155_queue_setup(struct vb2_queue *vq,
124 		unsigned int *nbuffers, unsigned int *num_planes,
125 		unsigned int sizes[], struct device *alloc_devs[])
126 
127 {
128 	struct dt3155_priv *pd = vb2_get_drv_priv(vq);
129 	unsigned size = pd->width * pd->height;
130 
131 	if (vq->num_buffers + *nbuffers < 2)
132 		*nbuffers = 2 - vq->num_buffers;
133 	if (*num_planes)
134 		return sizes[0] < size ? -EINVAL : 0;
135 	*num_planes = 1;
136 	sizes[0] = size;
137 	return 0;
138 }
139 
140 static int dt3155_buf_prepare(struct vb2_buffer *vb)
141 {
142 	struct dt3155_priv *pd = vb2_get_drv_priv(vb->vb2_queue);
143 
144 	vb2_set_plane_payload(vb, 0, pd->width * pd->height);
145 	return 0;
146 }
147 
148 static int dt3155_start_streaming(struct vb2_queue *q, unsigned count)
149 {
150 	struct dt3155_priv *pd = vb2_get_drv_priv(q);
151 	struct vb2_buffer *vb = &pd->curr_buf->vb2_buf;
152 	dma_addr_t dma_addr;
153 
154 	pd->sequence = 0;
155 	dma_addr = vb2_dma_contig_plane_dma_addr(vb, 0);
156 	iowrite32(dma_addr, pd->regs + EVEN_DMA_START);
157 	iowrite32(dma_addr + pd->width, pd->regs + ODD_DMA_START);
158 	iowrite32(pd->width, pd->regs + EVEN_DMA_STRIDE);
159 	iowrite32(pd->width, pd->regs + ODD_DMA_STRIDE);
160 	/* enable interrupts, clear all irq flags */
161 	iowrite32(FLD_START_EN | FLD_END_ODD_EN | FLD_START |
162 			FLD_END_EVEN | FLD_END_ODD, pd->regs + INT_CSR);
163 	iowrite32(FIFO_EN | SRST | FLD_CRPT_ODD | FLD_CRPT_EVEN |
164 		  FLD_DN_ODD | FLD_DN_EVEN | CAP_CONT_EVEN | CAP_CONT_ODD,
165 							pd->regs + CSR1);
166 	wait_i2c_reg(pd->regs);
167 	write_i2c_reg(pd->regs, CONFIG, pd->config);
168 	write_i2c_reg(pd->regs, EVEN_CSR, CSR_ERROR | CSR_DONE);
169 	write_i2c_reg(pd->regs, ODD_CSR, CSR_ERROR | CSR_DONE);
170 
171 	/*  start the board  */
172 	write_i2c_reg(pd->regs, CSR2, pd->csr2 | BUSY_EVEN | BUSY_ODD);
173 	return 0;
174 }
175 
176 static void dt3155_stop_streaming(struct vb2_queue *q)
177 {
178 	struct dt3155_priv *pd = vb2_get_drv_priv(q);
179 	struct vb2_buffer *vb;
180 
181 	spin_lock_irq(&pd->lock);
182 	/* stop the board */
183 	write_i2c_reg_nowait(pd->regs, CSR2, pd->csr2);
184 	iowrite32(FIFO_EN | SRST | FLD_CRPT_ODD | FLD_CRPT_EVEN |
185 		  FLD_DN_ODD | FLD_DN_EVEN, pd->regs + CSR1);
186 	/* disable interrupts, clear all irq flags */
187 	iowrite32(FLD_START | FLD_END_EVEN | FLD_END_ODD, pd->regs + INT_CSR);
188 	spin_unlock_irq(&pd->lock);
189 
190 	/*
191 	 * It is not clear whether the DMA stops at once or whether it
192 	 * will finish the current frame or field first. To be on the
193 	 * safe side we wait a bit.
194 	 */
195 	msleep(45);
196 
197 	spin_lock_irq(&pd->lock);
198 	if (pd->curr_buf) {
199 		vb2_buffer_done(&pd->curr_buf->vb2_buf, VB2_BUF_STATE_ERROR);
200 		pd->curr_buf = NULL;
201 	}
202 
203 	while (!list_empty(&pd->dmaq)) {
204 		vb = list_first_entry(&pd->dmaq, typeof(*vb), done_entry);
205 		list_del(&vb->done_entry);
206 		vb2_buffer_done(vb, VB2_BUF_STATE_ERROR);
207 	}
208 	spin_unlock_irq(&pd->lock);
209 }
210 
211 static void dt3155_buf_queue(struct vb2_buffer *vb)
212 {
213 	struct vb2_v4l2_buffer *vbuf = to_vb2_v4l2_buffer(vb);
214 	struct dt3155_priv *pd = vb2_get_drv_priv(vb->vb2_queue);
215 
216 	/*  pd->vidq.streaming = 1 when dt3155_buf_queue() is invoked  */
217 	spin_lock_irq(&pd->lock);
218 	if (pd->curr_buf)
219 		list_add_tail(&vb->done_entry, &pd->dmaq);
220 	else
221 		pd->curr_buf = vbuf;
222 	spin_unlock_irq(&pd->lock);
223 }
224 
225 static const struct vb2_ops q_ops = {
226 	.queue_setup = dt3155_queue_setup,
227 	.wait_prepare = vb2_ops_wait_prepare,
228 	.wait_finish = vb2_ops_wait_finish,
229 	.buf_prepare = dt3155_buf_prepare,
230 	.start_streaming = dt3155_start_streaming,
231 	.stop_streaming = dt3155_stop_streaming,
232 	.buf_queue = dt3155_buf_queue,
233 };
234 
235 static irqreturn_t dt3155_irq_handler_even(int irq, void *dev_id)
236 {
237 	struct dt3155_priv *ipd = dev_id;
238 	struct vb2_buffer *ivb;
239 	dma_addr_t dma_addr;
240 	u32 tmp;
241 
242 	tmp = ioread32(ipd->regs + INT_CSR) & (FLD_START | FLD_END_ODD);
243 	if (!tmp)
244 		return IRQ_NONE;  /* not our irq */
245 	if ((tmp & FLD_START) && !(tmp & FLD_END_ODD)) {
246 		iowrite32(FLD_START_EN | FLD_END_ODD_EN | FLD_START,
247 							ipd->regs + INT_CSR);
248 		return IRQ_HANDLED; /* start of field irq */
249 	}
250 	tmp = ioread32(ipd->regs + CSR1) & (FLD_CRPT_EVEN | FLD_CRPT_ODD);
251 	if (tmp) {
252 		iowrite32(FIFO_EN | SRST | FLD_CRPT_ODD | FLD_CRPT_EVEN |
253 						FLD_DN_ODD | FLD_DN_EVEN |
254 						CAP_CONT_EVEN | CAP_CONT_ODD,
255 							ipd->regs + CSR1);
256 	}
257 
258 	spin_lock(&ipd->lock);
259 	if (ipd->curr_buf && !list_empty(&ipd->dmaq)) {
260 		ipd->curr_buf->vb2_buf.timestamp = ktime_get_ns();
261 		ipd->curr_buf->sequence = ipd->sequence++;
262 		ipd->curr_buf->field = V4L2_FIELD_NONE;
263 		vb2_buffer_done(&ipd->curr_buf->vb2_buf, VB2_BUF_STATE_DONE);
264 
265 		ivb = list_first_entry(&ipd->dmaq, typeof(*ivb), done_entry);
266 		list_del(&ivb->done_entry);
267 		ipd->curr_buf = to_vb2_v4l2_buffer(ivb);
268 		dma_addr = vb2_dma_contig_plane_dma_addr(ivb, 0);
269 		iowrite32(dma_addr, ipd->regs + EVEN_DMA_START);
270 		iowrite32(dma_addr + ipd->width, ipd->regs + ODD_DMA_START);
271 		iowrite32(ipd->width, ipd->regs + EVEN_DMA_STRIDE);
272 		iowrite32(ipd->width, ipd->regs + ODD_DMA_STRIDE);
273 	}
274 
275 	/* enable interrupts, clear all irq flags */
276 	iowrite32(FLD_START_EN | FLD_END_ODD_EN | FLD_START |
277 			FLD_END_EVEN | FLD_END_ODD, ipd->regs + INT_CSR);
278 	spin_unlock(&ipd->lock);
279 	return IRQ_HANDLED;
280 }
281 
282 static const struct v4l2_file_operations dt3155_fops = {
283 	.owner = THIS_MODULE,
284 	.open = v4l2_fh_open,
285 	.release = vb2_fop_release,
286 	.unlocked_ioctl = video_ioctl2,
287 	.read = vb2_fop_read,
288 	.mmap = vb2_fop_mmap,
289 	.poll = vb2_fop_poll
290 };
291 
292 static int dt3155_querycap(struct file *filp, void *p,
293 			   struct v4l2_capability *cap)
294 {
295 	struct dt3155_priv *pd = video_drvdata(filp);
296 
297 	strscpy(cap->driver, DT3155_NAME, sizeof(cap->driver));
298 	strscpy(cap->card, DT3155_NAME " frame grabber", sizeof(cap->card));
299 	sprintf(cap->bus_info, "PCI:%s", pci_name(pd->pdev));
300 	return 0;
301 }
302 
303 static int dt3155_enum_fmt_vid_cap(struct file *filp,
304 				   void *p, struct v4l2_fmtdesc *f)
305 {
306 	if (f->index)
307 		return -EINVAL;
308 	f->pixelformat = V4L2_PIX_FMT_GREY;
309 	return 0;
310 }
311 
312 static int dt3155_fmt_vid_cap(struct file *filp, void *p, struct v4l2_format *f)
313 {
314 	struct dt3155_priv *pd = video_drvdata(filp);
315 
316 	f->fmt.pix.width = pd->width;
317 	f->fmt.pix.height = pd->height;
318 	f->fmt.pix.pixelformat = V4L2_PIX_FMT_GREY;
319 	f->fmt.pix.field = V4L2_FIELD_NONE;
320 	f->fmt.pix.bytesperline = f->fmt.pix.width;
321 	f->fmt.pix.sizeimage = f->fmt.pix.width * f->fmt.pix.height;
322 	f->fmt.pix.colorspace = V4L2_COLORSPACE_SMPTE170M;
323 	return 0;
324 }
325 
326 static int dt3155_g_std(struct file *filp, void *p, v4l2_std_id *norm)
327 {
328 	struct dt3155_priv *pd = video_drvdata(filp);
329 
330 	*norm = pd->std;
331 	return 0;
332 }
333 
334 static int dt3155_s_std(struct file *filp, void *p, v4l2_std_id norm)
335 {
336 	struct dt3155_priv *pd = video_drvdata(filp);
337 
338 	if (pd->std == norm)
339 		return 0;
340 	if (vb2_is_busy(&pd->vidq))
341 		return -EBUSY;
342 	pd->std = norm;
343 	if (pd->std & V4L2_STD_525_60) {
344 		pd->csr2 = VT_60HZ;
345 		pd->width = 640;
346 		pd->height = 480;
347 	} else {
348 		pd->csr2 = VT_50HZ;
349 		pd->width = 768;
350 		pd->height = 576;
351 	}
352 	return 0;
353 }
354 
355 static int dt3155_enum_input(struct file *filp, void *p,
356 			     struct v4l2_input *input)
357 {
358 	if (input->index > 3)
359 		return -EINVAL;
360 	if (input->index)
361 		snprintf(input->name, sizeof(input->name), "VID%d",
362 			 input->index);
363 	else
364 		strscpy(input->name, "J2/VID0", sizeof(input->name));
365 	input->type = V4L2_INPUT_TYPE_CAMERA;
366 	input->std = V4L2_STD_ALL;
367 	input->status = 0;
368 	return 0;
369 }
370 
371 static int dt3155_g_input(struct file *filp, void *p, unsigned int *i)
372 {
373 	struct dt3155_priv *pd = video_drvdata(filp);
374 
375 	*i = pd->input;
376 	return 0;
377 }
378 
379 static int dt3155_s_input(struct file *filp, void *p, unsigned int i)
380 {
381 	struct dt3155_priv *pd = video_drvdata(filp);
382 
383 	if (i > 3)
384 		return -EINVAL;
385 	pd->input = i;
386 	write_i2c_reg(pd->regs, AD_ADDR, AD_CMD_REG);
387 	write_i2c_reg(pd->regs, AD_CMD, (i << 6) | (i << 4) | SYNC_LVL_3);
388 	return 0;
389 }
390 
391 static const struct v4l2_ioctl_ops dt3155_ioctl_ops = {
392 	.vidioc_querycap = dt3155_querycap,
393 	.vidioc_enum_fmt_vid_cap = dt3155_enum_fmt_vid_cap,
394 	.vidioc_try_fmt_vid_cap = dt3155_fmt_vid_cap,
395 	.vidioc_g_fmt_vid_cap = dt3155_fmt_vid_cap,
396 	.vidioc_s_fmt_vid_cap = dt3155_fmt_vid_cap,
397 	.vidioc_reqbufs = vb2_ioctl_reqbufs,
398 	.vidioc_create_bufs = vb2_ioctl_create_bufs,
399 	.vidioc_querybuf = vb2_ioctl_querybuf,
400 	.vidioc_expbuf = vb2_ioctl_expbuf,
401 	.vidioc_qbuf = vb2_ioctl_qbuf,
402 	.vidioc_dqbuf = vb2_ioctl_dqbuf,
403 	.vidioc_streamon = vb2_ioctl_streamon,
404 	.vidioc_streamoff = vb2_ioctl_streamoff,
405 	.vidioc_g_std = dt3155_g_std,
406 	.vidioc_s_std = dt3155_s_std,
407 	.vidioc_enum_input = dt3155_enum_input,
408 	.vidioc_g_input = dt3155_g_input,
409 	.vidioc_s_input = dt3155_s_input,
410 };
411 
412 static int dt3155_init_board(struct dt3155_priv *pd)
413 {
414 	struct pci_dev *pdev = pd->pdev;
415 	int i;
416 	u8 tmp = 0;
417 
418 	pci_set_master(pdev); /* dt3155 needs it */
419 
420 	/*  resetting the adapter  */
421 	iowrite32(ADDR_ERR_ODD | ADDR_ERR_EVEN | FLD_CRPT_ODD | FLD_CRPT_EVEN |
422 			FLD_DN_ODD | FLD_DN_EVEN, pd->regs + CSR1);
423 	msleep(20);
424 
425 	/*  initializing adapter registers  */
426 	iowrite32(FIFO_EN | SRST, pd->regs + CSR1);
427 	iowrite32(0xEEEEEE01, pd->regs + EVEN_PIXEL_FMT);
428 	iowrite32(0xEEEEEE01, pd->regs + ODD_PIXEL_FMT);
429 	iowrite32(0x00000020, pd->regs + FIFO_TRIGGER);
430 	iowrite32(0x00000103, pd->regs + XFER_MODE);
431 	iowrite32(0, pd->regs + RETRY_WAIT_CNT);
432 	iowrite32(0, pd->regs + INT_CSR);
433 	iowrite32(1, pd->regs + EVEN_FLD_MASK);
434 	iowrite32(1, pd->regs + ODD_FLD_MASK);
435 	iowrite32(0, pd->regs + MASK_LENGTH);
436 	iowrite32(0x0005007C, pd->regs + FIFO_FLAG_CNT);
437 	iowrite32(0x01010101, pd->regs + IIC_CLK_DUR);
438 
439 	/* verifying that we have a DT3155 board (not just a SAA7116 chip) */
440 	read_i2c_reg(pd->regs, DT_ID, &tmp);
441 	if (tmp != DT3155_ID)
442 		return -ENODEV;
443 
444 	/* initialize AD LUT */
445 	write_i2c_reg(pd->regs, AD_ADDR, 0);
446 	for (i = 0; i < 256; i++)
447 		write_i2c_reg(pd->regs, AD_LUT, i);
448 
449 	/* initialize ADC references */
450 	/* FIXME: pos_ref & neg_ref depend on VT_50HZ */
451 	write_i2c_reg(pd->regs, AD_ADDR, AD_CMD_REG);
452 	write_i2c_reg(pd->regs, AD_CMD, VIDEO_CNL_1 | SYNC_CNL_1 | SYNC_LVL_3);
453 	write_i2c_reg(pd->regs, AD_ADDR, AD_POS_REF);
454 	write_i2c_reg(pd->regs, AD_CMD, 34);
455 	write_i2c_reg(pd->regs, AD_ADDR, AD_NEG_REF);
456 	write_i2c_reg(pd->regs, AD_CMD, 0);
457 
458 	/* initialize PM LUT */
459 	write_i2c_reg(pd->regs, CONFIG, pd->config | PM_LUT_PGM);
460 	for (i = 0; i < 256; i++) {
461 		write_i2c_reg(pd->regs, PM_LUT_ADDR, i);
462 		write_i2c_reg(pd->regs, PM_LUT_DATA, i);
463 	}
464 	write_i2c_reg(pd->regs, CONFIG, pd->config | PM_LUT_PGM | PM_LUT_SEL);
465 	for (i = 0; i < 256; i++) {
466 		write_i2c_reg(pd->regs, PM_LUT_ADDR, i);
467 		write_i2c_reg(pd->regs, PM_LUT_DATA, i);
468 	}
469 	write_i2c_reg(pd->regs, CONFIG, pd->config); /*  ACQ_MODE_EVEN  */
470 
471 	/* select channel 1 for input and set sync level */
472 	write_i2c_reg(pd->regs, AD_ADDR, AD_CMD_REG);
473 	write_i2c_reg(pd->regs, AD_CMD, VIDEO_CNL_1 | SYNC_CNL_1 | SYNC_LVL_3);
474 
475 	/* disable all irqs, clear all irq flags */
476 	iowrite32(FLD_START | FLD_END_EVEN | FLD_END_ODD,
477 			pd->regs + INT_CSR);
478 
479 	return 0;
480 }
481 
482 static const struct video_device dt3155_vdev = {
483 	.name = DT3155_NAME,
484 	.fops = &dt3155_fops,
485 	.ioctl_ops = &dt3155_ioctl_ops,
486 	.minor = -1,
487 	.release = video_device_release_empty,
488 	.tvnorms = V4L2_STD_ALL,
489 	.device_caps = V4L2_CAP_VIDEO_CAPTURE | V4L2_CAP_STREAMING |
490 		       V4L2_CAP_READWRITE,
491 };
492 
493 static int dt3155_probe(struct pci_dev *pdev, const struct pci_device_id *id)
494 {
495 	int err;
496 	struct dt3155_priv *pd;
497 
498 	err = dma_set_mask_and_coherent(&pdev->dev, DMA_BIT_MASK(32));
499 	if (err)
500 		return -ENODEV;
501 	pd = devm_kzalloc(&pdev->dev, sizeof(*pd), GFP_KERNEL);
502 	if (!pd)
503 		return -ENOMEM;
504 
505 	err = v4l2_device_register(&pdev->dev, &pd->v4l2_dev);
506 	if (err)
507 		return err;
508 	pd->vdev = dt3155_vdev;
509 	pd->vdev.v4l2_dev = &pd->v4l2_dev;
510 	video_set_drvdata(&pd->vdev, pd);  /* for use in video_fops */
511 	pd->pdev = pdev;
512 	pd->std = V4L2_STD_625_50;
513 	pd->csr2 = VT_50HZ;
514 	pd->width = 768;
515 	pd->height = 576;
516 	INIT_LIST_HEAD(&pd->dmaq);
517 	mutex_init(&pd->mux);
518 	pd->vdev.lock = &pd->mux; /* for locking v4l2_file_operations */
519 	pd->vidq.type = V4L2_BUF_TYPE_VIDEO_CAPTURE;
520 	pd->vidq.timestamp_flags = V4L2_BUF_FLAG_TIMESTAMP_MONOTONIC;
521 	pd->vidq.io_modes = VB2_MMAP | VB2_DMABUF | VB2_READ;
522 	pd->vidq.ops = &q_ops;
523 	pd->vidq.mem_ops = &vb2_dma_contig_memops;
524 	pd->vidq.drv_priv = pd;
525 	pd->vidq.min_buffers_needed = 2;
526 	pd->vidq.gfp_flags = GFP_DMA32;
527 	pd->vidq.lock = &pd->mux; /* for locking v4l2_file_operations */
528 	pd->vidq.dev = &pdev->dev;
529 	pd->vdev.queue = &pd->vidq;
530 	err = vb2_queue_init(&pd->vidq);
531 	if (err < 0)
532 		goto err_v4l2_dev_unreg;
533 	spin_lock_init(&pd->lock);
534 	pd->config = ACQ_MODE_EVEN;
535 	err = pci_enable_device(pdev);
536 	if (err)
537 		goto err_v4l2_dev_unreg;
538 	err = pci_request_region(pdev, 0, pci_name(pdev));
539 	if (err)
540 		goto err_pci_disable;
541 	pd->regs = pci_iomap(pdev, 0, pci_resource_len(pd->pdev, 0));
542 	if (!pd->regs) {
543 		err = -ENOMEM;
544 		goto err_free_reg;
545 	}
546 	err = dt3155_init_board(pd);
547 	if (err)
548 		goto err_iounmap;
549 	err = request_irq(pd->pdev->irq, dt3155_irq_handler_even,
550 					IRQF_SHARED, DT3155_NAME, pd);
551 	if (err)
552 		goto err_iounmap;
553 	err = video_register_device(&pd->vdev, VFL_TYPE_VIDEO, -1);
554 	if (err)
555 		goto err_free_irq;
556 	dev_info(&pdev->dev, "/dev/video%i is ready\n", pd->vdev.minor);
557 	return 0;  /*   success   */
558 
559 err_free_irq:
560 	free_irq(pd->pdev->irq, pd);
561 err_iounmap:
562 	pci_iounmap(pdev, pd->regs);
563 err_free_reg:
564 	pci_release_region(pdev, 0);
565 err_pci_disable:
566 	pci_disable_device(pdev);
567 err_v4l2_dev_unreg:
568 	v4l2_device_unregister(&pd->v4l2_dev);
569 	return err;
570 }
571 
572 static void dt3155_remove(struct pci_dev *pdev)
573 {
574 	struct v4l2_device *v4l2_dev = pci_get_drvdata(pdev);
575 	struct dt3155_priv *pd = container_of(v4l2_dev, struct dt3155_priv,
576 					      v4l2_dev);
577 
578 	video_unregister_device(&pd->vdev);
579 	free_irq(pd->pdev->irq, pd);
580 	vb2_queue_release(&pd->vidq);
581 	v4l2_device_unregister(&pd->v4l2_dev);
582 	pci_iounmap(pdev, pd->regs);
583 	pci_release_region(pdev, 0);
584 	pci_disable_device(pdev);
585 }
586 
587 static const struct pci_device_id pci_ids[] = {
588 	{ PCI_DEVICE(PCI_VENDOR_ID_INTEL, DT3155_DEVICE_ID) },
589 	{ 0, /* zero marks the end */ },
590 };
591 MODULE_DEVICE_TABLE(pci, pci_ids);
592 
593 static struct pci_driver pci_driver = {
594 	.name = DT3155_NAME,
595 	.id_table = pci_ids,
596 	.probe = dt3155_probe,
597 	.remove = dt3155_remove,
598 };
599 
600 module_pci_driver(pci_driver);
601 
602 MODULE_DESCRIPTION("video4linux pci-driver for dt3155 frame grabber");
603 MODULE_AUTHOR("Marin Mitov <mitov@issp.bas.bg>");
604 MODULE_VERSION(DT3155_VERSION);
605 MODULE_LICENSE("GPL");
606