1 /* 2 * cx18 ADEC audio functions 3 * 4 * Derived from cx25840-core.c 5 * 6 * Copyright (C) 2007 Hans Verkuil <hverkuil@xs4all.nl> 7 * Copyright (C) 2008 Andy Walls <awalls@md.metrocast.net> 8 * 9 * This program is free software; you can redistribute it and/or 10 * modify it under the terms of the GNU General Public License 11 * as published by the Free Software Foundation; either version 2 12 * of the License, or (at your option) any later version. 13 * 14 * This program is distributed in the hope that it will be useful, 15 * but WITHOUT ANY WARRANTY; without even the implied warranty of 16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 17 * GNU General Public License for more details. 18 * 19 * You should have received a copy of the GNU General Public License 20 * along with this program; if not, write to the Free Software 21 * Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 22 * 02110-1301, USA. 23 */ 24 25 #include "cx18-driver.h" 26 #include "cx18-io.h" 27 #include "cx18-cards.h" 28 29 int cx18_av_write(struct cx18 *cx, u16 addr, u8 value) 30 { 31 u32 reg = 0xc40000 + (addr & ~3); 32 u32 mask = 0xff; 33 int shift = (addr & 3) * 8; 34 u32 x = cx18_read_reg(cx, reg); 35 36 x = (x & ~(mask << shift)) | ((u32)value << shift); 37 cx18_write_reg(cx, x, reg); 38 return 0; 39 } 40 41 int cx18_av_write_expect(struct cx18 *cx, u16 addr, u8 value, u8 eval, u8 mask) 42 { 43 u32 reg = 0xc40000 + (addr & ~3); 44 int shift = (addr & 3) * 8; 45 u32 x = cx18_read_reg(cx, reg); 46 47 x = (x & ~((u32)0xff << shift)) | ((u32)value << shift); 48 cx18_write_reg_expect(cx, x, reg, 49 ((u32)eval << shift), ((u32)mask << shift)); 50 return 0; 51 } 52 53 int cx18_av_write4(struct cx18 *cx, u16 addr, u32 value) 54 { 55 cx18_write_reg(cx, value, 0xc40000 + addr); 56 return 0; 57 } 58 59 int 60 cx18_av_write4_expect(struct cx18 *cx, u16 addr, u32 value, u32 eval, u32 mask) 61 { 62 cx18_write_reg_expect(cx, value, 0xc40000 + addr, eval, mask); 63 return 0; 64 } 65 66 int cx18_av_write4_noretry(struct cx18 *cx, u16 addr, u32 value) 67 { 68 cx18_write_reg_noretry(cx, value, 0xc40000 + addr); 69 return 0; 70 } 71 72 u8 cx18_av_read(struct cx18 *cx, u16 addr) 73 { 74 u32 x = cx18_read_reg(cx, 0xc40000 + (addr & ~3)); 75 int shift = (addr & 3) * 8; 76 77 return (x >> shift) & 0xff; 78 } 79 80 u32 cx18_av_read4(struct cx18 *cx, u16 addr) 81 { 82 return cx18_read_reg(cx, 0xc40000 + addr); 83 } 84 85 int cx18_av_and_or(struct cx18 *cx, u16 addr, unsigned and_mask, 86 u8 or_value) 87 { 88 return cx18_av_write(cx, addr, 89 (cx18_av_read(cx, addr) & and_mask) | 90 or_value); 91 } 92 93 int cx18_av_and_or4(struct cx18 *cx, u16 addr, u32 and_mask, 94 u32 or_value) 95 { 96 return cx18_av_write4(cx, addr, 97 (cx18_av_read4(cx, addr) & and_mask) | 98 or_value); 99 } 100 101 static void cx18_av_init(struct cx18 *cx) 102 { 103 /* 104 * The crystal freq used in calculations in this driver will be 105 * 28.636360 MHz. 106 * Aim to run the PLLs' VCOs near 400 MHz to minimze errors. 107 */ 108 109 /* 110 * VDCLK Integer = 0x0f, Post Divider = 0x04 111 * AIMCLK Integer = 0x0e, Post Divider = 0x16 112 */ 113 cx18_av_write4(cx, CXADEC_PLL_CTRL1, 0x160e040f); 114 115 /* VDCLK Fraction = 0x2be2fe */ 116 /* xtal * 0xf.15f17f0/4 = 108 MHz: 432 MHz before post divide */ 117 cx18_av_write4(cx, CXADEC_VID_PLL_FRAC, 0x002be2fe); 118 119 /* AIMCLK Fraction = 0x05227ad */ 120 /* xtal * 0xe.2913d68/0x16 = 48000 * 384: 406 MHz pre post-div*/ 121 cx18_av_write4(cx, CXADEC_AUX_PLL_FRAC, 0x005227ad); 122 123 /* SA_MCLK_SEL=1, SA_MCLK_DIV=0x16 */ 124 cx18_av_write(cx, CXADEC_I2S_MCLK, 0x56); 125 } 126 127 static void cx18_av_initialize(struct v4l2_subdev *sd) 128 { 129 struct cx18_av_state *state = to_cx18_av_state(sd); 130 struct cx18 *cx = v4l2_get_subdevdata(sd); 131 int default_volume; 132 u32 v; 133 134 cx18_av_loadfw(cx); 135 /* Stop 8051 code execution */ 136 cx18_av_write4_expect(cx, CXADEC_DL_CTL, 0x03000000, 137 0x03000000, 0x13000000); 138 139 /* initallize the PLL by toggling sleep bit */ 140 v = cx18_av_read4(cx, CXADEC_HOST_REG1); 141 /* enable sleep mode - register appears to be read only... */ 142 cx18_av_write4_expect(cx, CXADEC_HOST_REG1, v | 1, v, 0xfffe); 143 /* disable sleep mode */ 144 cx18_av_write4_expect(cx, CXADEC_HOST_REG1, v & 0xfffe, 145 v & 0xfffe, 0xffff); 146 147 /* initialize DLLs */ 148 v = cx18_av_read4(cx, CXADEC_DLL1_DIAG_CTRL) & 0xE1FFFEFF; 149 /* disable FLD */ 150 cx18_av_write4(cx, CXADEC_DLL1_DIAG_CTRL, v); 151 /* enable FLD */ 152 cx18_av_write4(cx, CXADEC_DLL1_DIAG_CTRL, v | 0x10000100); 153 154 v = cx18_av_read4(cx, CXADEC_DLL2_DIAG_CTRL) & 0xE1FFFEFF; 155 /* disable FLD */ 156 cx18_av_write4(cx, CXADEC_DLL2_DIAG_CTRL, v); 157 /* enable FLD */ 158 cx18_av_write4(cx, CXADEC_DLL2_DIAG_CTRL, v | 0x06000100); 159 160 /* set analog bias currents. Set Vreg to 1.20V. */ 161 cx18_av_write4(cx, CXADEC_AFE_DIAG_CTRL1, 0x000A1802); 162 163 v = cx18_av_read4(cx, CXADEC_AFE_DIAG_CTRL3) | 1; 164 /* enable TUNE_FIL_RST */ 165 cx18_av_write4_expect(cx, CXADEC_AFE_DIAG_CTRL3, v, v, 0x03009F0F); 166 /* disable TUNE_FIL_RST */ 167 cx18_av_write4_expect(cx, CXADEC_AFE_DIAG_CTRL3, 168 v & 0xFFFFFFFE, v & 0xFFFFFFFE, 0x03009F0F); 169 170 /* enable 656 output */ 171 cx18_av_and_or4(cx, CXADEC_PIN_CTRL1, ~0, 0x040C00); 172 173 /* video output drive strength */ 174 cx18_av_and_or4(cx, CXADEC_PIN_CTRL2, ~0, 0x2); 175 176 /* reset video */ 177 cx18_av_write4(cx, CXADEC_SOFT_RST_CTRL, 0x8000); 178 cx18_av_write4(cx, CXADEC_SOFT_RST_CTRL, 0); 179 180 /* 181 * Disable Video Auto-config of the Analog Front End and Video PLL. 182 * 183 * Since we only use BT.656 pixel mode, which works for both 525 and 625 184 * line systems, it's just easier for us to set registers 185 * 0x102 (CXADEC_CHIP_CTRL), 0x104-0x106 (CXADEC_AFE_CTRL), 186 * 0x108-0x109 (CXADEC_PLL_CTRL1), and 0x10c-0x10f (CXADEC_VID_PLL_FRAC) 187 * ourselves, than to run around cleaning up after the auto-config. 188 * 189 * (Note: my CX23418 chip doesn't seem to let the ACFG_DIS bit 190 * get set to 1, but OTOH, it doesn't seem to do AFE and VID PLL 191 * autoconfig either.) 192 * 193 * As a default, also turn off Dual mode for ADC2 and set ADC2 to CH3. 194 */ 195 cx18_av_and_or4(cx, CXADEC_CHIP_CTRL, 0xFFFBFFFF, 0x00120000); 196 197 /* Setup the Video and and Aux/Audio PLLs */ 198 cx18_av_init(cx); 199 200 /* set video to auto-detect */ 201 /* Clear bits 11-12 to enable slow locking mode. Set autodetect mode */ 202 /* set the comb notch = 1 */ 203 cx18_av_and_or4(cx, CXADEC_MODE_CTRL, 0xFFF7E7F0, 0x02040800); 204 205 /* Enable wtw_en in CRUSH_CTRL (Set bit 22) */ 206 /* Enable maj_sel in CRUSH_CTRL (Set bit 20) */ 207 cx18_av_and_or4(cx, CXADEC_CRUSH_CTRL, ~0, 0x00500000); 208 209 /* Set VGA_TRACK_RANGE to 0x20 */ 210 cx18_av_and_or4(cx, CXADEC_DFE_CTRL2, 0xFFFF00FF, 0x00002000); 211 212 /* 213 * Initial VBI setup 214 * VIP-1.1, 10 bit mode, enable Raw, disable sliced, 215 * don't clamp raw samples when codes are in use, 1 byte user D-words, 216 * IDID0 has line #, RP code V bit transition on VBLANK, data during 217 * blanking intervals 218 */ 219 cx18_av_write4(cx, CXADEC_OUT_CTRL1, 0x4013252e); 220 221 /* Set the video input. 222 The setting in MODE_CTRL gets lost when we do the above setup */ 223 /* EncSetSignalStd(dwDevNum, pEnc->dwSigStd); */ 224 /* EncSetVideoInput(dwDevNum, pEnc->VidIndSelection); */ 225 226 /* 227 * Analog Front End (AFE) 228 * Default to luma on ch1/ADC1, chroma on ch2/ADC2, SIF on ch3/ADC2 229 * bypass_ch[1-3] use filter 230 * droop_comp_ch[1-3] disable 231 * clamp_en_ch[1-3] disable 232 * aud_in_sel ADC2 233 * luma_in_sel ADC1 234 * chroma_in_sel ADC2 235 * clamp_sel_ch[2-3] midcode 236 * clamp_sel_ch1 video decoder 237 * vga_sel_ch3 audio decoder 238 * vga_sel_ch[1-2] video decoder 239 * half_bw_ch[1-3] disable 240 * +12db_ch[1-3] disable 241 */ 242 cx18_av_and_or4(cx, CXADEC_AFE_CTRL, 0xFF000000, 0x00005D00); 243 244 /* if(dwEnable && dw3DCombAvailable) { */ 245 /* CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x7728021F); */ 246 /* } else { */ 247 /* CxDevWrReg(CXADEC_SRC_COMB_CFG, 0x6628021F); */ 248 /* } */ 249 cx18_av_write4(cx, CXADEC_SRC_COMB_CFG, 0x6628021F); 250 default_volume = cx18_av_read(cx, 0x8d4); 251 /* 252 * Enforce the legacy volume scale mapping limits to avoid 253 * -ERANGE errors when initializing the volume control 254 */ 255 if (default_volume > 228) { 256 /* Bottom out at -96 dB, v4l2 vol range 0x2e00-0x2fff */ 257 default_volume = 228; 258 cx18_av_write(cx, 0x8d4, 228); 259 } else if (default_volume < 20) { 260 /* Top out at + 8 dB, v4l2 vol range 0xfe00-0xffff */ 261 default_volume = 20; 262 cx18_av_write(cx, 0x8d4, 20); 263 } 264 default_volume = (((228 - default_volume) >> 1) + 23) << 9; 265 state->volume->cur.val = state->volume->default_value = default_volume; 266 v4l2_ctrl_handler_setup(&state->hdl); 267 } 268 269 static int cx18_av_reset(struct v4l2_subdev *sd, u32 val) 270 { 271 cx18_av_initialize(sd); 272 return 0; 273 } 274 275 static int cx18_av_load_fw(struct v4l2_subdev *sd) 276 { 277 struct cx18_av_state *state = to_cx18_av_state(sd); 278 279 if (!state->is_initialized) { 280 /* initialize on first use */ 281 state->is_initialized = 1; 282 cx18_av_initialize(sd); 283 } 284 return 0; 285 } 286 287 void cx18_av_std_setup(struct cx18 *cx) 288 { 289 struct cx18_av_state *state = &cx->av_state; 290 struct v4l2_subdev *sd = &state->sd; 291 v4l2_std_id std = state->std; 292 293 /* 294 * Video ADC crystal clock to pixel clock SRC decimation ratio 295 * 28.636360 MHz/13.5 Mpps * 256 = 0x21f.07b 296 */ 297 const int src_decimation = 0x21f; 298 299 int hblank, hactive, burst, vblank, vactive, sc; 300 int vblank656; 301 int luma_lpf, uv_lpf, comb; 302 u32 pll_int, pll_frac, pll_post; 303 304 /* datasheet startup, step 8d */ 305 if (std & ~V4L2_STD_NTSC) 306 cx18_av_write(cx, 0x49f, 0x11); 307 else 308 cx18_av_write(cx, 0x49f, 0x14); 309 310 /* 311 * Note: At the end of a field, there are 3 sets of half line duration 312 * (double horizontal rate) pulses: 313 * 314 * 5 (625) or 6 (525) half-lines to blank for the vertical retrace 315 * 5 (625) or 6 (525) vertical sync pulses of half line duration 316 * 5 (625) or 6 (525) half-lines of equalization pulses 317 */ 318 if (std & V4L2_STD_625_50) { 319 /* 320 * The following relationships of half line counts should hold: 321 * 625 = vblank656 + vactive 322 * 10 = vblank656 - vblank = vsync pulses + equalization pulses 323 * 324 * vblank656: half lines after line 625/mid-313 of blanked video 325 * vblank: half lines, after line 5/317, of blanked video 326 * vactive: half lines of active video + 327 * 5 half lines after the end of active video 328 * 329 * As far as I can tell: 330 * vblank656 starts counting from the falling edge of the first 331 * vsync pulse (start of line 1 or mid-313) 332 * vblank starts counting from the after the 5 vsync pulses and 333 * 5 or 4 equalization pulses (start of line 6 or 318) 334 * 335 * For 625 line systems the driver will extract VBI information 336 * from lines 6-23 and lines 318-335 (but the slicer can only 337 * handle 17 lines, not the 18 in the vblank region). 338 * In addition, we need vblank656 and vblank to be one whole 339 * line longer, to cover line 24 and 336, so the SAV/EAV RP 340 * codes get generated such that the encoder can actually 341 * extract line 23 & 335 (WSS). We'll lose 1 line in each field 342 * at the top of the screen. 343 * 344 * It appears the 5 half lines that happen after active 345 * video must be included in vactive (579 instead of 574), 346 * otherwise the colors get badly displayed in various regions 347 * of the screen. I guess the chroma comb filter gets confused 348 * without them (at least when a PVR-350 is the PAL source). 349 */ 350 vblank656 = 48; /* lines 1 - 24 & 313 - 336 */ 351 vblank = 38; /* lines 6 - 24 & 318 - 336 */ 352 vactive = 579; /* lines 24 - 313 & 337 - 626 */ 353 354 /* 355 * For a 13.5 Mpps clock and 15,625 Hz line rate, a line is 356 * is 864 pixels = 720 active + 144 blanking. ITU-R BT.601 357 * specifies 12 luma clock periods or ~ 0.9 * 13.5 Mpps after 358 * the end of active video to start a horizontal line, so that 359 * leaves 132 pixels of hblank to ignore. 360 */ 361 hblank = 132; 362 hactive = 720; 363 364 /* 365 * Burst gate delay (for 625 line systems) 366 * Hsync leading edge to color burst rise = 5.6 us 367 * Color burst width = 2.25 us 368 * Gate width = 4 pixel clocks 369 * (5.6 us + 2.25/2 us) * 13.5 Mpps + 4/2 clocks = 92.79 clocks 370 */ 371 burst = 93; 372 luma_lpf = 2; 373 if (std & V4L2_STD_PAL) { 374 uv_lpf = 1; 375 comb = 0x20; 376 /* sc = 4433618.75 * src_decimation/28636360 * 2^13 */ 377 sc = 688700; 378 } else if (std == V4L2_STD_PAL_Nc) { 379 uv_lpf = 1; 380 comb = 0x20; 381 /* sc = 3582056.25 * src_decimation/28636360 * 2^13 */ 382 sc = 556422; 383 } else { /* SECAM */ 384 uv_lpf = 0; 385 comb = 0; 386 /* (fr + fb)/2 = (4406260 + 4250000)/2 = 4328130 */ 387 /* sc = 4328130 * src_decimation/28636360 * 2^13 */ 388 sc = 672314; 389 } 390 } else { 391 /* 392 * The following relationships of half line counts should hold: 393 * 525 = prevsync + vblank656 + vactive 394 * 12 = vblank656 - vblank = vsync pulses + equalization pulses 395 * 396 * prevsync: 6 half-lines before the vsync pulses 397 * vblank656: half lines, after line 3/mid-266, of blanked video 398 * vblank: half lines, after line 9/272, of blanked video 399 * vactive: half lines of active video 400 * 401 * As far as I can tell: 402 * vblank656 starts counting from the falling edge of the first 403 * vsync pulse (start of line 4 or mid-266) 404 * vblank starts counting from the after the 6 vsync pulses and 405 * 6 or 5 equalization pulses (start of line 10 or 272) 406 * 407 * For 525 line systems the driver will extract VBI information 408 * from lines 10-21 and lines 273-284. 409 */ 410 vblank656 = 38; /* lines 4 - 22 & 266 - 284 */ 411 vblank = 26; /* lines 10 - 22 & 272 - 284 */ 412 vactive = 481; /* lines 23 - 263 & 285 - 525 */ 413 414 /* 415 * For a 13.5 Mpps clock and 15,734.26 Hz line rate, a line is 416 * is 858 pixels = 720 active + 138 blanking. The Hsync leading 417 * edge should happen 1.2 us * 13.5 Mpps ~= 16 pixels after the 418 * end of active video, leaving 122 pixels of hblank to ignore 419 * before active video starts. 420 */ 421 hactive = 720; 422 hblank = 122; 423 luma_lpf = 1; 424 uv_lpf = 1; 425 426 /* 427 * Burst gate delay (for 525 line systems) 428 * Hsync leading edge to color burst rise = 5.3 us 429 * Color burst width = 2.5 us 430 * Gate width = 4 pixel clocks 431 * (5.3 us + 2.5/2 us) * 13.5 Mpps + 4/2 clocks = 90.425 clocks 432 */ 433 if (std == V4L2_STD_PAL_60) { 434 burst = 90; 435 luma_lpf = 2; 436 comb = 0x20; 437 /* sc = 4433618.75 * src_decimation/28636360 * 2^13 */ 438 sc = 688700; 439 } else if (std == V4L2_STD_PAL_M) { 440 /* The 97 needs to be verified against PAL-M timings */ 441 burst = 97; 442 comb = 0x20; 443 /* sc = 3575611.49 * src_decimation/28636360 * 2^13 */ 444 sc = 555421; 445 } else { 446 burst = 90; 447 comb = 0x66; 448 /* sc = 3579545.45.. * src_decimation/28636360 * 2^13 */ 449 sc = 556032; 450 } 451 } 452 453 /* DEBUG: Displays configured PLL frequency */ 454 pll_int = cx18_av_read(cx, 0x108); 455 pll_frac = cx18_av_read4(cx, 0x10c) & 0x1ffffff; 456 pll_post = cx18_av_read(cx, 0x109); 457 CX18_DEBUG_INFO_DEV(sd, "PLL regs = int: %u, frac: %u, post: %u\n", 458 pll_int, pll_frac, pll_post); 459 460 if (pll_post) { 461 int fsc, pll; 462 u64 tmp; 463 464 pll = (28636360L * ((((u64)pll_int) << 25) + pll_frac)) >> 25; 465 pll /= pll_post; 466 CX18_DEBUG_INFO_DEV(sd, "Video PLL = %d.%06d MHz\n", 467 pll / 1000000, pll % 1000000); 468 CX18_DEBUG_INFO_DEV(sd, "Pixel rate = %d.%06d Mpixel/sec\n", 469 pll / 8000000, (pll / 8) % 1000000); 470 471 CX18_DEBUG_INFO_DEV(sd, "ADC XTAL/pixel clock decimation ratio " 472 "= %d.%03d\n", src_decimation / 256, 473 ((src_decimation % 256) * 1000) / 256); 474 475 tmp = 28636360 * (u64) sc; 476 do_div(tmp, src_decimation); 477 fsc = tmp >> 13; 478 CX18_DEBUG_INFO_DEV(sd, 479 "Chroma sub-carrier initial freq = %d.%06d " 480 "MHz\n", fsc / 1000000, fsc % 1000000); 481 482 CX18_DEBUG_INFO_DEV(sd, "hblank %i, hactive %i, vblank %i, " 483 "vactive %i, vblank656 %i, src_dec %i, " 484 "burst 0x%02x, luma_lpf %i, uv_lpf %i, " 485 "comb 0x%02x, sc 0x%06x\n", 486 hblank, hactive, vblank, vactive, vblank656, 487 src_decimation, burst, luma_lpf, uv_lpf, 488 comb, sc); 489 } 490 491 /* Sets horizontal blanking delay and active lines */ 492 cx18_av_write(cx, 0x470, hblank); 493 cx18_av_write(cx, 0x471, 0xff & (((hblank >> 8) & 0x3) | 494 (hactive << 4))); 495 cx18_av_write(cx, 0x472, hactive >> 4); 496 497 /* Sets burst gate delay */ 498 cx18_av_write(cx, 0x473, burst); 499 500 /* Sets vertical blanking delay and active duration */ 501 cx18_av_write(cx, 0x474, vblank); 502 cx18_av_write(cx, 0x475, 0xff & (((vblank >> 8) & 0x3) | 503 (vactive << 4))); 504 cx18_av_write(cx, 0x476, vactive >> 4); 505 cx18_av_write(cx, 0x477, vblank656); 506 507 /* Sets src decimation rate */ 508 cx18_av_write(cx, 0x478, 0xff & src_decimation); 509 cx18_av_write(cx, 0x479, 0xff & (src_decimation >> 8)); 510 511 /* Sets Luma and UV Low pass filters */ 512 cx18_av_write(cx, 0x47a, luma_lpf << 6 | ((uv_lpf << 4) & 0x30)); 513 514 /* Enables comb filters */ 515 cx18_av_write(cx, 0x47b, comb); 516 517 /* Sets SC Step*/ 518 cx18_av_write(cx, 0x47c, sc); 519 cx18_av_write(cx, 0x47d, 0xff & sc >> 8); 520 cx18_av_write(cx, 0x47e, 0xff & sc >> 16); 521 522 if (std & V4L2_STD_625_50) { 523 state->slicer_line_delay = 1; 524 state->slicer_line_offset = (6 + state->slicer_line_delay - 2); 525 } else { 526 state->slicer_line_delay = 0; 527 state->slicer_line_offset = (10 + state->slicer_line_delay - 2); 528 } 529 cx18_av_write(cx, 0x47f, state->slicer_line_delay); 530 } 531 532 static void input_change(struct cx18 *cx) 533 { 534 struct cx18_av_state *state = &cx->av_state; 535 v4l2_std_id std = state->std; 536 u8 v; 537 538 /* Follow step 8c and 8d of section 3.16 in the cx18_av datasheet */ 539 cx18_av_write(cx, 0x49f, (std & V4L2_STD_NTSC) ? 0x14 : 0x11); 540 cx18_av_and_or(cx, 0x401, ~0x60, 0); 541 cx18_av_and_or(cx, 0x401, ~0x60, 0x60); 542 543 if (std & V4L2_STD_525_60) { 544 if (std == V4L2_STD_NTSC_M_JP) { 545 /* Japan uses EIAJ audio standard */ 546 cx18_av_write_expect(cx, 0x808, 0xf7, 0xf7, 0xff); 547 cx18_av_write_expect(cx, 0x80b, 0x02, 0x02, 0x3f); 548 } else if (std == V4L2_STD_NTSC_M_KR) { 549 /* South Korea uses A2 audio standard */ 550 cx18_av_write_expect(cx, 0x808, 0xf8, 0xf8, 0xff); 551 cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f); 552 } else { 553 /* Others use the BTSC audio standard */ 554 cx18_av_write_expect(cx, 0x808, 0xf6, 0xf6, 0xff); 555 cx18_av_write_expect(cx, 0x80b, 0x01, 0x01, 0x3f); 556 } 557 } else if (std & V4L2_STD_PAL) { 558 /* Follow tuner change procedure for PAL */ 559 cx18_av_write_expect(cx, 0x808, 0xff, 0xff, 0xff); 560 cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f); 561 } else if (std & V4L2_STD_SECAM) { 562 /* Select autodetect for SECAM */ 563 cx18_av_write_expect(cx, 0x808, 0xff, 0xff, 0xff); 564 cx18_av_write_expect(cx, 0x80b, 0x03, 0x03, 0x3f); 565 } 566 567 v = cx18_av_read(cx, 0x803); 568 if (v & 0x10) { 569 /* restart audio decoder microcontroller */ 570 v &= ~0x10; 571 cx18_av_write_expect(cx, 0x803, v, v, 0x1f); 572 v |= 0x10; 573 cx18_av_write_expect(cx, 0x803, v, v, 0x1f); 574 } 575 } 576 577 static int cx18_av_s_frequency(struct v4l2_subdev *sd, 578 const struct v4l2_frequency *freq) 579 { 580 struct cx18 *cx = v4l2_get_subdevdata(sd); 581 input_change(cx); 582 return 0; 583 } 584 585 static int set_input(struct cx18 *cx, enum cx18_av_video_input vid_input, 586 enum cx18_av_audio_input aud_input) 587 { 588 struct cx18_av_state *state = &cx->av_state; 589 struct v4l2_subdev *sd = &state->sd; 590 591 enum analog_signal_type { 592 NONE, CVBS, Y, C, SIF, Pb, Pr 593 } ch[3] = {NONE, NONE, NONE}; 594 595 u8 afe_mux_cfg; 596 u8 adc2_cfg; 597 u8 input_mode; 598 u32 afe_cfg; 599 int i; 600 601 CX18_DEBUG_INFO_DEV(sd, "decoder set video input %d, audio input %d\n", 602 vid_input, aud_input); 603 604 if (vid_input >= CX18_AV_COMPOSITE1 && 605 vid_input <= CX18_AV_COMPOSITE8) { 606 afe_mux_cfg = 0xf0 + (vid_input - CX18_AV_COMPOSITE1); 607 ch[0] = CVBS; 608 input_mode = 0x0; 609 } else if (vid_input >= CX18_AV_COMPONENT_LUMA1) { 610 int luma = vid_input & 0xf000; 611 int r_chroma = vid_input & 0xf0000; 612 int b_chroma = vid_input & 0xf00000; 613 614 if ((vid_input & ~0xfff000) || 615 luma < CX18_AV_COMPONENT_LUMA1 || 616 luma > CX18_AV_COMPONENT_LUMA8 || 617 r_chroma < CX18_AV_COMPONENT_R_CHROMA4 || 618 r_chroma > CX18_AV_COMPONENT_R_CHROMA6 || 619 b_chroma < CX18_AV_COMPONENT_B_CHROMA7 || 620 b_chroma > CX18_AV_COMPONENT_B_CHROMA8) { 621 CX18_ERR_DEV(sd, "0x%06x is not a valid video input!\n", 622 vid_input); 623 return -EINVAL; 624 } 625 afe_mux_cfg = (luma - CX18_AV_COMPONENT_LUMA1) >> 12; 626 ch[0] = Y; 627 afe_mux_cfg |= (r_chroma - CX18_AV_COMPONENT_R_CHROMA4) >> 12; 628 ch[1] = Pr; 629 afe_mux_cfg |= (b_chroma - CX18_AV_COMPONENT_B_CHROMA7) >> 14; 630 ch[2] = Pb; 631 input_mode = 0x6; 632 } else { 633 int luma = vid_input & 0xf0; 634 int chroma = vid_input & 0xf00; 635 636 if ((vid_input & ~0xff0) || 637 luma < CX18_AV_SVIDEO_LUMA1 || 638 luma > CX18_AV_SVIDEO_LUMA8 || 639 chroma < CX18_AV_SVIDEO_CHROMA4 || 640 chroma > CX18_AV_SVIDEO_CHROMA8) { 641 CX18_ERR_DEV(sd, "0x%06x is not a valid video input!\n", 642 vid_input); 643 return -EINVAL; 644 } 645 afe_mux_cfg = 0xf0 + ((luma - CX18_AV_SVIDEO_LUMA1) >> 4); 646 ch[0] = Y; 647 if (chroma >= CX18_AV_SVIDEO_CHROMA7) { 648 afe_mux_cfg &= 0x3f; 649 afe_mux_cfg |= (chroma - CX18_AV_SVIDEO_CHROMA7) >> 2; 650 ch[2] = C; 651 } else { 652 afe_mux_cfg &= 0xcf; 653 afe_mux_cfg |= (chroma - CX18_AV_SVIDEO_CHROMA4) >> 4; 654 ch[1] = C; 655 } 656 input_mode = 0x2; 657 } 658 659 switch (aud_input) { 660 case CX18_AV_AUDIO_SERIAL1: 661 case CX18_AV_AUDIO_SERIAL2: 662 /* do nothing, use serial audio input */ 663 break; 664 case CX18_AV_AUDIO4: 665 afe_mux_cfg &= ~0x30; 666 ch[1] = SIF; 667 break; 668 case CX18_AV_AUDIO5: 669 afe_mux_cfg = (afe_mux_cfg & ~0x30) | 0x10; 670 ch[1] = SIF; 671 break; 672 case CX18_AV_AUDIO6: 673 afe_mux_cfg = (afe_mux_cfg & ~0x30) | 0x20; 674 ch[1] = SIF; 675 break; 676 case CX18_AV_AUDIO7: 677 afe_mux_cfg &= ~0xc0; 678 ch[2] = SIF; 679 break; 680 case CX18_AV_AUDIO8: 681 afe_mux_cfg = (afe_mux_cfg & ~0xc0) | 0x40; 682 ch[2] = SIF; 683 break; 684 685 default: 686 CX18_ERR_DEV(sd, "0x%04x is not a valid audio input!\n", 687 aud_input); 688 return -EINVAL; 689 } 690 691 /* Set up analog front end multiplexers */ 692 cx18_av_write_expect(cx, 0x103, afe_mux_cfg, afe_mux_cfg, 0xf7); 693 /* Set INPUT_MODE to Composite, S-Video, or Component */ 694 cx18_av_and_or(cx, 0x401, ~0x6, input_mode); 695 696 /* Set CH_SEL_ADC2 to 1 if input comes from CH3 */ 697 adc2_cfg = cx18_av_read(cx, 0x102); 698 if (ch[2] == NONE) 699 adc2_cfg &= ~0x2; /* No sig on CH3, set ADC2 to CH2 for input */ 700 else 701 adc2_cfg |= 0x2; /* Signal on CH3, set ADC2 to CH3 for input */ 702 703 /* Set DUAL_MODE_ADC2 to 1 if input comes from both CH2 and CH3 */ 704 if (ch[1] != NONE && ch[2] != NONE) 705 adc2_cfg |= 0x4; /* Set dual mode */ 706 else 707 adc2_cfg &= ~0x4; /* Clear dual mode */ 708 cx18_av_write_expect(cx, 0x102, adc2_cfg, adc2_cfg, 0x17); 709 710 /* Configure the analog front end */ 711 afe_cfg = cx18_av_read4(cx, CXADEC_AFE_CTRL); 712 afe_cfg &= 0xff000000; 713 afe_cfg |= 0x00005000; /* CHROMA_IN, AUD_IN: ADC2; LUMA_IN: ADC1 */ 714 if (ch[1] != NONE && ch[2] != NONE) 715 afe_cfg |= 0x00000030; /* half_bw_ch[2-3] since in dual mode */ 716 717 for (i = 0; i < 3; i++) { 718 switch (ch[i]) { 719 default: 720 case NONE: 721 /* CLAMP_SEL = Fixed to midcode clamp level */ 722 afe_cfg |= (0x00000200 << i); 723 break; 724 case CVBS: 725 case Y: 726 if (i > 0) 727 afe_cfg |= 0x00002000; /* LUMA_IN_SEL: ADC2 */ 728 break; 729 case C: 730 case Pb: 731 case Pr: 732 /* CLAMP_SEL = Fixed to midcode clamp level */ 733 afe_cfg |= (0x00000200 << i); 734 if (i == 0 && ch[i] == C) 735 afe_cfg &= ~0x00001000; /* CHROMA_IN_SEL ADC1 */ 736 break; 737 case SIF: 738 /* 739 * VGA_GAIN_SEL = Audio Decoder 740 * CLAMP_SEL = Fixed to midcode clamp level 741 */ 742 afe_cfg |= (0x00000240 << i); 743 if (i == 0) 744 afe_cfg &= ~0x00004000; /* AUD_IN_SEL ADC1 */ 745 break; 746 } 747 } 748 749 cx18_av_write4(cx, CXADEC_AFE_CTRL, afe_cfg); 750 751 state->vid_input = vid_input; 752 state->aud_input = aud_input; 753 cx18_av_audio_set_path(cx); 754 input_change(cx); 755 return 0; 756 } 757 758 static int cx18_av_s_video_routing(struct v4l2_subdev *sd, 759 u32 input, u32 output, u32 config) 760 { 761 struct cx18_av_state *state = to_cx18_av_state(sd); 762 struct cx18 *cx = v4l2_get_subdevdata(sd); 763 return set_input(cx, input, state->aud_input); 764 } 765 766 static int cx18_av_s_audio_routing(struct v4l2_subdev *sd, 767 u32 input, u32 output, u32 config) 768 { 769 struct cx18_av_state *state = to_cx18_av_state(sd); 770 struct cx18 *cx = v4l2_get_subdevdata(sd); 771 return set_input(cx, state->vid_input, input); 772 } 773 774 static int cx18_av_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt) 775 { 776 struct cx18_av_state *state = to_cx18_av_state(sd); 777 struct cx18 *cx = v4l2_get_subdevdata(sd); 778 u8 vpres; 779 u8 mode; 780 int val = 0; 781 782 if (state->radio) 783 return 0; 784 785 vpres = cx18_av_read(cx, 0x40e) & 0x20; 786 vt->signal = vpres ? 0xffff : 0x0; 787 788 vt->capability |= 789 V4L2_TUNER_CAP_STEREO | V4L2_TUNER_CAP_LANG1 | 790 V4L2_TUNER_CAP_LANG2 | V4L2_TUNER_CAP_SAP; 791 792 mode = cx18_av_read(cx, 0x804); 793 794 /* get rxsubchans and audmode */ 795 if ((mode & 0xf) == 1) 796 val |= V4L2_TUNER_SUB_STEREO; 797 else 798 val |= V4L2_TUNER_SUB_MONO; 799 800 if (mode == 2 || mode == 4) 801 val = V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2; 802 803 if (mode & 0x10) 804 val |= V4L2_TUNER_SUB_SAP; 805 806 vt->rxsubchans = val; 807 vt->audmode = state->audmode; 808 return 0; 809 } 810 811 static int cx18_av_s_tuner(struct v4l2_subdev *sd, const struct v4l2_tuner *vt) 812 { 813 struct cx18_av_state *state = to_cx18_av_state(sd); 814 struct cx18 *cx = v4l2_get_subdevdata(sd); 815 u8 v; 816 817 if (state->radio) 818 return 0; 819 820 v = cx18_av_read(cx, 0x809); 821 v &= ~0xf; 822 823 switch (vt->audmode) { 824 case V4L2_TUNER_MODE_MONO: 825 /* mono -> mono 826 stereo -> mono 827 bilingual -> lang1 */ 828 break; 829 case V4L2_TUNER_MODE_STEREO: 830 case V4L2_TUNER_MODE_LANG1: 831 /* mono -> mono 832 stereo -> stereo 833 bilingual -> lang1 */ 834 v |= 0x4; 835 break; 836 case V4L2_TUNER_MODE_LANG1_LANG2: 837 /* mono -> mono 838 stereo -> stereo 839 bilingual -> lang1/lang2 */ 840 v |= 0x7; 841 break; 842 case V4L2_TUNER_MODE_LANG2: 843 /* mono -> mono 844 stereo -> stereo 845 bilingual -> lang2 */ 846 v |= 0x1; 847 break; 848 default: 849 return -EINVAL; 850 } 851 cx18_av_write_expect(cx, 0x809, v, v, 0xff); 852 state->audmode = vt->audmode; 853 return 0; 854 } 855 856 static int cx18_av_s_std(struct v4l2_subdev *sd, v4l2_std_id norm) 857 { 858 struct cx18_av_state *state = to_cx18_av_state(sd); 859 struct cx18 *cx = v4l2_get_subdevdata(sd); 860 861 u8 fmt = 0; /* zero is autodetect */ 862 u8 pal_m = 0; 863 864 if (state->radio == 0 && state->std == norm) 865 return 0; 866 867 state->radio = 0; 868 state->std = norm; 869 870 /* First tests should be against specific std */ 871 if (state->std == V4L2_STD_NTSC_M_JP) { 872 fmt = 0x2; 873 } else if (state->std == V4L2_STD_NTSC_443) { 874 fmt = 0x3; 875 } else if (state->std == V4L2_STD_PAL_M) { 876 pal_m = 1; 877 fmt = 0x5; 878 } else if (state->std == V4L2_STD_PAL_N) { 879 fmt = 0x6; 880 } else if (state->std == V4L2_STD_PAL_Nc) { 881 fmt = 0x7; 882 } else if (state->std == V4L2_STD_PAL_60) { 883 fmt = 0x8; 884 } else { 885 /* Then, test against generic ones */ 886 if (state->std & V4L2_STD_NTSC) 887 fmt = 0x1; 888 else if (state->std & V4L2_STD_PAL) 889 fmt = 0x4; 890 else if (state->std & V4L2_STD_SECAM) 891 fmt = 0xc; 892 } 893 894 CX18_DEBUG_INFO_DEV(sd, "changing video std to fmt %i\n", fmt); 895 896 /* Follow step 9 of section 3.16 in the cx18_av datasheet. 897 Without this PAL may display a vertical ghosting effect. 898 This happens for example with the Yuan MPC622. */ 899 if (fmt >= 4 && fmt < 8) { 900 /* Set format to NTSC-M */ 901 cx18_av_and_or(cx, 0x400, ~0xf, 1); 902 /* Turn off LCOMB */ 903 cx18_av_and_or(cx, 0x47b, ~6, 0); 904 } 905 cx18_av_and_or(cx, 0x400, ~0x2f, fmt | 0x20); 906 cx18_av_and_or(cx, 0x403, ~0x3, pal_m); 907 cx18_av_std_setup(cx); 908 input_change(cx); 909 return 0; 910 } 911 912 static int cx18_av_s_radio(struct v4l2_subdev *sd) 913 { 914 struct cx18_av_state *state = to_cx18_av_state(sd); 915 state->radio = 1; 916 return 0; 917 } 918 919 static int cx18_av_s_ctrl(struct v4l2_ctrl *ctrl) 920 { 921 struct v4l2_subdev *sd = to_sd(ctrl); 922 struct cx18 *cx = v4l2_get_subdevdata(sd); 923 924 switch (ctrl->id) { 925 case V4L2_CID_BRIGHTNESS: 926 cx18_av_write(cx, 0x414, ctrl->val - 128); 927 break; 928 929 case V4L2_CID_CONTRAST: 930 cx18_av_write(cx, 0x415, ctrl->val << 1); 931 break; 932 933 case V4L2_CID_SATURATION: 934 cx18_av_write(cx, 0x420, ctrl->val << 1); 935 cx18_av_write(cx, 0x421, ctrl->val << 1); 936 break; 937 938 case V4L2_CID_HUE: 939 cx18_av_write(cx, 0x422, ctrl->val); 940 break; 941 942 default: 943 return -EINVAL; 944 } 945 return 0; 946 } 947 948 static int cx18_av_s_mbus_fmt(struct v4l2_subdev *sd, struct v4l2_mbus_framefmt *fmt) 949 { 950 struct cx18_av_state *state = to_cx18_av_state(sd); 951 struct cx18 *cx = v4l2_get_subdevdata(sd); 952 int HSC, VSC, Vsrc, Hsrc, filter, Vlines; 953 int is_50Hz = !(state->std & V4L2_STD_525_60); 954 955 if (fmt->code != V4L2_MBUS_FMT_FIXED) 956 return -EINVAL; 957 958 fmt->field = V4L2_FIELD_INTERLACED; 959 fmt->colorspace = V4L2_COLORSPACE_SMPTE170M; 960 961 Vsrc = (cx18_av_read(cx, 0x476) & 0x3f) << 4; 962 Vsrc |= (cx18_av_read(cx, 0x475) & 0xf0) >> 4; 963 964 Hsrc = (cx18_av_read(cx, 0x472) & 0x3f) << 4; 965 Hsrc |= (cx18_av_read(cx, 0x471) & 0xf0) >> 4; 966 967 /* 968 * This adjustment reflects the excess of vactive, set in 969 * cx18_av_std_setup(), above standard values: 970 * 971 * 480 + 1 for 60 Hz systems 972 * 576 + 3 for 50 Hz systems 973 */ 974 Vlines = fmt->height + (is_50Hz ? 3 : 1); 975 976 /* 977 * Invalid height and width scaling requests are: 978 * 1. width less than 1/16 of the source width 979 * 2. width greater than the source width 980 * 3. height less than 1/8 of the source height 981 * 4. height greater than the source height 982 */ 983 if ((fmt->width * 16 < Hsrc) || (Hsrc < fmt->width) || 984 (Vlines * 8 < Vsrc) || (Vsrc < Vlines)) { 985 CX18_ERR_DEV(sd, "%dx%d is not a valid size!\n", 986 fmt->width, fmt->height); 987 return -ERANGE; 988 } 989 990 HSC = (Hsrc * (1 << 20)) / fmt->width - (1 << 20); 991 VSC = (1 << 16) - (Vsrc * (1 << 9) / Vlines - (1 << 9)); 992 VSC &= 0x1fff; 993 994 if (fmt->width >= 385) 995 filter = 0; 996 else if (fmt->width > 192) 997 filter = 1; 998 else if (fmt->width > 96) 999 filter = 2; 1000 else 1001 filter = 3; 1002 1003 CX18_DEBUG_INFO_DEV(sd, 1004 "decoder set size %dx%d -> scale %ux%u\n", 1005 fmt->width, fmt->height, HSC, VSC); 1006 1007 /* HSCALE=HSC */ 1008 cx18_av_write(cx, 0x418, HSC & 0xff); 1009 cx18_av_write(cx, 0x419, (HSC >> 8) & 0xff); 1010 cx18_av_write(cx, 0x41a, HSC >> 16); 1011 /* VSCALE=VSC */ 1012 cx18_av_write(cx, 0x41c, VSC & 0xff); 1013 cx18_av_write(cx, 0x41d, VSC >> 8); 1014 /* VS_INTRLACE=1 VFILT=filter */ 1015 cx18_av_write(cx, 0x41e, 0x8 | filter); 1016 return 0; 1017 } 1018 1019 static int cx18_av_s_stream(struct v4l2_subdev *sd, int enable) 1020 { 1021 struct cx18 *cx = v4l2_get_subdevdata(sd); 1022 1023 CX18_DEBUG_INFO_DEV(sd, "%s output\n", enable ? "enable" : "disable"); 1024 if (enable) { 1025 cx18_av_write(cx, 0x115, 0x8c); 1026 cx18_av_write(cx, 0x116, 0x07); 1027 } else { 1028 cx18_av_write(cx, 0x115, 0x00); 1029 cx18_av_write(cx, 0x116, 0x00); 1030 } 1031 return 0; 1032 } 1033 1034 static void log_video_status(struct cx18 *cx) 1035 { 1036 static const char *const fmt_strs[] = { 1037 "0x0", 1038 "NTSC-M", "NTSC-J", "NTSC-4.43", 1039 "PAL-BDGHI", "PAL-M", "PAL-N", "PAL-Nc", "PAL-60", 1040 "0x9", "0xA", "0xB", 1041 "SECAM", 1042 "0xD", "0xE", "0xF" 1043 }; 1044 1045 struct cx18_av_state *state = &cx->av_state; 1046 struct v4l2_subdev *sd = &state->sd; 1047 u8 vidfmt_sel = cx18_av_read(cx, 0x400) & 0xf; 1048 u8 gen_stat1 = cx18_av_read(cx, 0x40d); 1049 u8 gen_stat2 = cx18_av_read(cx, 0x40e); 1050 int vid_input = state->vid_input; 1051 1052 CX18_INFO_DEV(sd, "Video signal: %spresent\n", 1053 (gen_stat2 & 0x20) ? "" : "not "); 1054 CX18_INFO_DEV(sd, "Detected format: %s\n", 1055 fmt_strs[gen_stat1 & 0xf]); 1056 1057 CX18_INFO_DEV(sd, "Specified standard: %s\n", 1058 vidfmt_sel ? fmt_strs[vidfmt_sel] 1059 : "automatic detection"); 1060 1061 if (vid_input >= CX18_AV_COMPOSITE1 && 1062 vid_input <= CX18_AV_COMPOSITE8) { 1063 CX18_INFO_DEV(sd, "Specified video input: Composite %d\n", 1064 vid_input - CX18_AV_COMPOSITE1 + 1); 1065 } else { 1066 CX18_INFO_DEV(sd, "Specified video input: " 1067 "S-Video (Luma In%d, Chroma In%d)\n", 1068 (vid_input & 0xf0) >> 4, 1069 (vid_input & 0xf00) >> 8); 1070 } 1071 1072 CX18_INFO_DEV(sd, "Specified audioclock freq: %d Hz\n", 1073 state->audclk_freq); 1074 } 1075 1076 static void log_audio_status(struct cx18 *cx) 1077 { 1078 struct cx18_av_state *state = &cx->av_state; 1079 struct v4l2_subdev *sd = &state->sd; 1080 u8 download_ctl = cx18_av_read(cx, 0x803); 1081 u8 mod_det_stat0 = cx18_av_read(cx, 0x804); 1082 u8 mod_det_stat1 = cx18_av_read(cx, 0x805); 1083 u8 audio_config = cx18_av_read(cx, 0x808); 1084 u8 pref_mode = cx18_av_read(cx, 0x809); 1085 u8 afc0 = cx18_av_read(cx, 0x80b); 1086 u8 mute_ctl = cx18_av_read(cx, 0x8d3); 1087 int aud_input = state->aud_input; 1088 char *p; 1089 1090 switch (mod_det_stat0) { 1091 case 0x00: p = "mono"; break; 1092 case 0x01: p = "stereo"; break; 1093 case 0x02: p = "dual"; break; 1094 case 0x04: p = "tri"; break; 1095 case 0x10: p = "mono with SAP"; break; 1096 case 0x11: p = "stereo with SAP"; break; 1097 case 0x12: p = "dual with SAP"; break; 1098 case 0x14: p = "tri with SAP"; break; 1099 case 0xfe: p = "forced mode"; break; 1100 default: p = "not defined"; break; 1101 } 1102 CX18_INFO_DEV(sd, "Detected audio mode: %s\n", p); 1103 1104 switch (mod_det_stat1) { 1105 case 0x00: p = "not defined"; break; 1106 case 0x01: p = "EIAJ"; break; 1107 case 0x02: p = "A2-M"; break; 1108 case 0x03: p = "A2-BG"; break; 1109 case 0x04: p = "A2-DK1"; break; 1110 case 0x05: p = "A2-DK2"; break; 1111 case 0x06: p = "A2-DK3"; break; 1112 case 0x07: p = "A1 (6.0 MHz FM Mono)"; break; 1113 case 0x08: p = "AM-L"; break; 1114 case 0x09: p = "NICAM-BG"; break; 1115 case 0x0a: p = "NICAM-DK"; break; 1116 case 0x0b: p = "NICAM-I"; break; 1117 case 0x0c: p = "NICAM-L"; break; 1118 case 0x0d: p = "BTSC/EIAJ/A2-M Mono (4.5 MHz FMMono)"; break; 1119 case 0x0e: p = "IF FM Radio"; break; 1120 case 0x0f: p = "BTSC"; break; 1121 case 0x10: p = "detected chrominance"; break; 1122 case 0xfd: p = "unknown audio standard"; break; 1123 case 0xfe: p = "forced audio standard"; break; 1124 case 0xff: p = "no detected audio standard"; break; 1125 default: p = "not defined"; break; 1126 } 1127 CX18_INFO_DEV(sd, "Detected audio standard: %s\n", p); 1128 CX18_INFO_DEV(sd, "Audio muted: %s\n", 1129 (mute_ctl & 0x2) ? "yes" : "no"); 1130 CX18_INFO_DEV(sd, "Audio microcontroller: %s\n", 1131 (download_ctl & 0x10) ? "running" : "stopped"); 1132 1133 switch (audio_config >> 4) { 1134 case 0x00: p = "undefined"; break; 1135 case 0x01: p = "BTSC"; break; 1136 case 0x02: p = "EIAJ"; break; 1137 case 0x03: p = "A2-M"; break; 1138 case 0x04: p = "A2-BG"; break; 1139 case 0x05: p = "A2-DK1"; break; 1140 case 0x06: p = "A2-DK2"; break; 1141 case 0x07: p = "A2-DK3"; break; 1142 case 0x08: p = "A1 (6.0 MHz FM Mono)"; break; 1143 case 0x09: p = "AM-L"; break; 1144 case 0x0a: p = "NICAM-BG"; break; 1145 case 0x0b: p = "NICAM-DK"; break; 1146 case 0x0c: p = "NICAM-I"; break; 1147 case 0x0d: p = "NICAM-L"; break; 1148 case 0x0e: p = "FM radio"; break; 1149 case 0x0f: p = "automatic detection"; break; 1150 default: p = "undefined"; break; 1151 } 1152 CX18_INFO_DEV(sd, "Configured audio standard: %s\n", p); 1153 1154 if ((audio_config >> 4) < 0xF) { 1155 switch (audio_config & 0xF) { 1156 case 0x00: p = "MONO1 (LANGUAGE A/Mono L+R channel for BTSC, EIAJ, A2)"; break; 1157 case 0x01: p = "MONO2 (LANGUAGE B)"; break; 1158 case 0x02: p = "MONO3 (STEREO forced MONO)"; break; 1159 case 0x03: p = "MONO4 (NICAM ANALOG-Language C/Analog Fallback)"; break; 1160 case 0x04: p = "STEREO"; break; 1161 case 0x05: p = "DUAL1 (AC)"; break; 1162 case 0x06: p = "DUAL2 (BC)"; break; 1163 case 0x07: p = "DUAL3 (AB)"; break; 1164 default: p = "undefined"; 1165 } 1166 CX18_INFO_DEV(sd, "Configured audio mode: %s\n", p); 1167 } else { 1168 switch (audio_config & 0xF) { 1169 case 0x00: p = "BG"; break; 1170 case 0x01: p = "DK1"; break; 1171 case 0x02: p = "DK2"; break; 1172 case 0x03: p = "DK3"; break; 1173 case 0x04: p = "I"; break; 1174 case 0x05: p = "L"; break; 1175 case 0x06: p = "BTSC"; break; 1176 case 0x07: p = "EIAJ"; break; 1177 case 0x08: p = "A2-M"; break; 1178 case 0x09: p = "FM Radio (4.5 MHz)"; break; 1179 case 0x0a: p = "FM Radio (5.5 MHz)"; break; 1180 case 0x0b: p = "S-Video"; break; 1181 case 0x0f: p = "automatic standard and mode detection"; break; 1182 default: p = "undefined"; break; 1183 } 1184 CX18_INFO_DEV(sd, "Configured audio system: %s\n", p); 1185 } 1186 1187 if (aud_input) 1188 CX18_INFO_DEV(sd, "Specified audio input: Tuner (In%d)\n", 1189 aud_input); 1190 else 1191 CX18_INFO_DEV(sd, "Specified audio input: External\n"); 1192 1193 switch (pref_mode & 0xf) { 1194 case 0: p = "mono/language A"; break; 1195 case 1: p = "language B"; break; 1196 case 2: p = "language C"; break; 1197 case 3: p = "analog fallback"; break; 1198 case 4: p = "stereo"; break; 1199 case 5: p = "language AC"; break; 1200 case 6: p = "language BC"; break; 1201 case 7: p = "language AB"; break; 1202 default: p = "undefined"; break; 1203 } 1204 CX18_INFO_DEV(sd, "Preferred audio mode: %s\n", p); 1205 1206 if ((audio_config & 0xf) == 0xf) { 1207 switch ((afc0 >> 3) & 0x1) { 1208 case 0: p = "system DK"; break; 1209 case 1: p = "system L"; break; 1210 } 1211 CX18_INFO_DEV(sd, "Selected 65 MHz format: %s\n", p); 1212 1213 switch (afc0 & 0x7) { 1214 case 0: p = "Chroma"; break; 1215 case 1: p = "BTSC"; break; 1216 case 2: p = "EIAJ"; break; 1217 case 3: p = "A2-M"; break; 1218 case 4: p = "autodetect"; break; 1219 default: p = "undefined"; break; 1220 } 1221 CX18_INFO_DEV(sd, "Selected 45 MHz format: %s\n", p); 1222 } 1223 } 1224 1225 static int cx18_av_log_status(struct v4l2_subdev *sd) 1226 { 1227 struct cx18 *cx = v4l2_get_subdevdata(sd); 1228 log_video_status(cx); 1229 log_audio_status(cx); 1230 return 0; 1231 } 1232 1233 #ifdef CONFIG_VIDEO_ADV_DEBUG 1234 static int cx18_av_g_register(struct v4l2_subdev *sd, 1235 struct v4l2_dbg_register *reg) 1236 { 1237 struct cx18 *cx = v4l2_get_subdevdata(sd); 1238 1239 if ((reg->reg & 0x3) != 0) 1240 return -EINVAL; 1241 reg->size = 4; 1242 reg->val = cx18_av_read4(cx, reg->reg & 0x00000ffc); 1243 return 0; 1244 } 1245 1246 static int cx18_av_s_register(struct v4l2_subdev *sd, 1247 const struct v4l2_dbg_register *reg) 1248 { 1249 struct cx18 *cx = v4l2_get_subdevdata(sd); 1250 1251 if ((reg->reg & 0x3) != 0) 1252 return -EINVAL; 1253 cx18_av_write4(cx, reg->reg & 0x00000ffc, reg->val); 1254 return 0; 1255 } 1256 #endif 1257 1258 static const struct v4l2_ctrl_ops cx18_av_ctrl_ops = { 1259 .s_ctrl = cx18_av_s_ctrl, 1260 }; 1261 1262 static const struct v4l2_subdev_core_ops cx18_av_general_ops = { 1263 .log_status = cx18_av_log_status, 1264 .load_fw = cx18_av_load_fw, 1265 .reset = cx18_av_reset, 1266 #ifdef CONFIG_VIDEO_ADV_DEBUG 1267 .g_register = cx18_av_g_register, 1268 .s_register = cx18_av_s_register, 1269 #endif 1270 }; 1271 1272 static const struct v4l2_subdev_tuner_ops cx18_av_tuner_ops = { 1273 .s_radio = cx18_av_s_radio, 1274 .s_frequency = cx18_av_s_frequency, 1275 .g_tuner = cx18_av_g_tuner, 1276 .s_tuner = cx18_av_s_tuner, 1277 }; 1278 1279 static const struct v4l2_subdev_audio_ops cx18_av_audio_ops = { 1280 .s_clock_freq = cx18_av_s_clock_freq, 1281 .s_routing = cx18_av_s_audio_routing, 1282 }; 1283 1284 static const struct v4l2_subdev_video_ops cx18_av_video_ops = { 1285 .s_std = cx18_av_s_std, 1286 .s_routing = cx18_av_s_video_routing, 1287 .s_stream = cx18_av_s_stream, 1288 .s_mbus_fmt = cx18_av_s_mbus_fmt, 1289 }; 1290 1291 static const struct v4l2_subdev_vbi_ops cx18_av_vbi_ops = { 1292 .decode_vbi_line = cx18_av_decode_vbi_line, 1293 .g_sliced_fmt = cx18_av_g_sliced_fmt, 1294 .s_sliced_fmt = cx18_av_s_sliced_fmt, 1295 .s_raw_fmt = cx18_av_s_raw_fmt, 1296 }; 1297 1298 static const struct v4l2_subdev_ops cx18_av_ops = { 1299 .core = &cx18_av_general_ops, 1300 .tuner = &cx18_av_tuner_ops, 1301 .audio = &cx18_av_audio_ops, 1302 .video = &cx18_av_video_ops, 1303 .vbi = &cx18_av_vbi_ops, 1304 }; 1305 1306 int cx18_av_probe(struct cx18 *cx) 1307 { 1308 struct cx18_av_state *state = &cx->av_state; 1309 struct v4l2_subdev *sd; 1310 int err; 1311 1312 state->rev = cx18_av_read4(cx, CXADEC_CHIP_CTRL) & 0xffff; 1313 1314 state->vid_input = CX18_AV_COMPOSITE7; 1315 state->aud_input = CX18_AV_AUDIO8; 1316 state->audclk_freq = 48000; 1317 state->audmode = V4L2_TUNER_MODE_LANG1; 1318 state->slicer_line_delay = 0; 1319 state->slicer_line_offset = (10 + state->slicer_line_delay - 2); 1320 1321 sd = &state->sd; 1322 v4l2_subdev_init(sd, &cx18_av_ops); 1323 v4l2_set_subdevdata(sd, cx); 1324 snprintf(sd->name, sizeof(sd->name), 1325 "%s %03x", cx->v4l2_dev.name, (state->rev >> 4)); 1326 sd->grp_id = CX18_HW_418_AV; 1327 v4l2_ctrl_handler_init(&state->hdl, 9); 1328 v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops, 1329 V4L2_CID_BRIGHTNESS, 0, 255, 1, 128); 1330 v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops, 1331 V4L2_CID_CONTRAST, 0, 127, 1, 64); 1332 v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops, 1333 V4L2_CID_SATURATION, 0, 127, 1, 64); 1334 v4l2_ctrl_new_std(&state->hdl, &cx18_av_ctrl_ops, 1335 V4L2_CID_HUE, -128, 127, 1, 0); 1336 1337 state->volume = v4l2_ctrl_new_std(&state->hdl, 1338 &cx18_av_audio_ctrl_ops, V4L2_CID_AUDIO_VOLUME, 1339 0, 65535, 65535 / 100, 0); 1340 v4l2_ctrl_new_std(&state->hdl, 1341 &cx18_av_audio_ctrl_ops, V4L2_CID_AUDIO_MUTE, 1342 0, 1, 1, 0); 1343 v4l2_ctrl_new_std(&state->hdl, &cx18_av_audio_ctrl_ops, 1344 V4L2_CID_AUDIO_BALANCE, 1345 0, 65535, 65535 / 100, 32768); 1346 v4l2_ctrl_new_std(&state->hdl, &cx18_av_audio_ctrl_ops, 1347 V4L2_CID_AUDIO_BASS, 1348 0, 65535, 65535 / 100, 32768); 1349 v4l2_ctrl_new_std(&state->hdl, &cx18_av_audio_ctrl_ops, 1350 V4L2_CID_AUDIO_TREBLE, 1351 0, 65535, 65535 / 100, 32768); 1352 sd->ctrl_handler = &state->hdl; 1353 if (state->hdl.error) { 1354 int err = state->hdl.error; 1355 1356 v4l2_ctrl_handler_free(&state->hdl); 1357 return err; 1358 } 1359 err = v4l2_device_register_subdev(&cx->v4l2_dev, sd); 1360 if (err) 1361 v4l2_ctrl_handler_free(&state->hdl); 1362 else 1363 cx18_av_init(cx); 1364 return err; 1365 } 1366