1 /*
2 
3     bttv-cards.c
4 
5     this file has configuration informations - card-specific stuff
6     like the big tvcards array for the most part
7 
8     Copyright (C) 1996,97,98 Ralph  Metzler (rjkm@thp.uni-koeln.de)
9 			   & Marcus Metzler (mocm@thp.uni-koeln.de)
10     (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de>
11 
12     This program is free software; you can redistribute it and/or modify
13     it under the terms of the GNU General Public License as published by
14     the Free Software Foundation; either version 2 of the License, or
15     (at your option) any later version.
16 
17     This program is distributed in the hope that it will be useful,
18     but WITHOUT ANY WARRANTY; without even the implied warranty of
19     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
20     GNU General Public License for more details.
21 
22     You should have received a copy of the GNU General Public License
23     along with this program; if not, write to the Free Software
24     Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 
26 */
27 
28 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt
29 
30 #include <linux/delay.h>
31 #include <linux/module.h>
32 #include <linux/kmod.h>
33 #include <linux/init.h>
34 #include <linux/pci.h>
35 #include <linux/vmalloc.h>
36 #include <linux/firmware.h>
37 #include <net/checksum.h>
38 
39 #include <asm/unaligned.h>
40 #include <asm/io.h>
41 
42 #include "bttvp.h"
43 #include <media/v4l2-common.h>
44 #include <media/i2c/tvaudio.h>
45 #include "bttv-audio-hook.h"
46 
47 /* fwd decl */
48 static void boot_msp34xx(struct bttv *btv, int pin);
49 static void hauppauge_eeprom(struct bttv *btv);
50 static void avermedia_eeprom(struct bttv *btv);
51 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]);
52 static void modtec_eeprom(struct bttv *btv);
53 static void init_PXC200(struct bttv *btv);
54 static void init_RTV24(struct bttv *btv);
55 static void init_PCI8604PW(struct bttv *btv);
56 
57 static void rv605_muxsel(struct bttv *btv, unsigned int input);
58 static void eagle_muxsel(struct bttv *btv, unsigned int input);
59 static void xguard_muxsel(struct bttv *btv, unsigned int input);
60 static void ivc120_muxsel(struct bttv *btv, unsigned int input);
61 static void gvc1100_muxsel(struct bttv *btv, unsigned int input);
62 
63 static void PXC200_muxsel(struct bttv *btv, unsigned int input);
64 
65 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input);
66 static void picolo_tetra_init(struct bttv *btv);
67 
68 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input);
69 static void tibetCS16_init(struct bttv *btv);
70 
71 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input);
72 static void kodicom4400r_init(struct bttv *btv);
73 
74 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input);
75 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input);
76 
77 static void geovision_muxsel(struct bttv *btv, unsigned int input);
78 
79 static void phytec_muxsel(struct bttv *btv, unsigned int input);
80 
81 static void gv800s_muxsel(struct bttv *btv, unsigned int input);
82 static void gv800s_init(struct bttv *btv);
83 
84 static void td3116_muxsel(struct bttv *btv, unsigned int input);
85 
86 static int terratec_active_radio_upgrade(struct bttv *btv);
87 static int tea575x_init(struct bttv *btv);
88 static void identify_by_eeprom(struct bttv *btv,
89 			       unsigned char eeprom_data[256]);
90 static int pvr_boot(struct bttv *btv);
91 
92 /* config variables */
93 static unsigned int triton1;
94 static unsigned int vsfx;
95 static unsigned int latency = UNSET;
96 int no_overlay=-1;
97 
98 static unsigned int card[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
99 static unsigned int pll[BTTV_MAX]    = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
100 static unsigned int tuner[BTTV_MAX]  = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
101 static unsigned int svhs[BTTV_MAX]   = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
102 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET };
103 static unsigned int audiodev[BTTV_MAX];
104 static unsigned int saa6588[BTTV_MAX];
105 static struct bttv  *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL };
106 static unsigned int autoload = UNSET;
107 static unsigned int gpiomask = UNSET;
108 static unsigned int audioall = UNSET;
109 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET };
110 
111 /* insmod options */
112 module_param(triton1,    int, 0444);
113 module_param(vsfx,       int, 0444);
114 module_param(no_overlay, int, 0444);
115 module_param(latency,    int, 0444);
116 module_param(gpiomask,   int, 0444);
117 module_param(audioall,   int, 0444);
118 module_param(autoload,   int, 0444);
119 
120 module_param_array(card,     int, NULL, 0444);
121 module_param_array(pll,      int, NULL, 0444);
122 module_param_array(tuner,    int, NULL, 0444);
123 module_param_array(svhs,     int, NULL, 0444);
124 module_param_array(remote,   int, NULL, 0444);
125 module_param_array(audiodev, int, NULL, 0444);
126 module_param_array(audiomux, int, NULL, 0444);
127 
128 MODULE_PARM_DESC(triton1, "set ETBF pci config bit [enable bug compatibility for triton1 + others]");
129 MODULE_PARM_DESC(vsfx, "set VSFX pci config bit [yet another chipset flaw workaround]");
130 MODULE_PARM_DESC(latency,"pci latency timer");
131 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list");
132 MODULE_PARM_DESC(pll, "specify installed crystal (0=none, 28=28 MHz, 35=35 MHz, 14=14 MHz)");
133 MODULE_PARM_DESC(tuner,"specify installed tuner type");
134 MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore");
135 MODULE_PARM_DESC(audiodev, "specify audio device:\n"
136 		"\t\t-1 = no audio\n"
137 		"\t\t 0 = autodetect (default)\n"
138 		"\t\t 1 = msp3400\n"
139 		"\t\t 2 = tda7432\n"
140 		"\t\t 3 = tvaudio");
141 MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition.");
142 MODULE_PARM_DESC(no_overlay, "allow override overlay default (0 disables, 1 enables) [some VIA/SIS chipsets are known to have problem with overlay]");
143 
144 
145 /* I2C addresses list */
146 #define I2C_ADDR_TDA7432	0x8a
147 #define I2C_ADDR_MSP3400	0x80
148 #define I2C_ADDR_MSP3400_ALT	0x88
149 
150 
151 /* ----------------------------------------------------------------------- */
152 /* list of card IDs for bt878+ cards                                       */
153 
154 static struct CARD {
155 	unsigned id;
156 	int cardnr;
157 	char *name;
158 } cards[] = {
159 	{ 0x13eb0070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV" },
160 	{ 0x39000070, BTTV_BOARD_HAUPPAUGE878,  "Hauppauge WinTV-D" },
161 	{ 0x45000070, BTTV_BOARD_HAUPPAUGEPVR,  "Hauppauge WinTV/PVR" },
162 	{ 0xff000070, BTTV_BOARD_OSPREY1x0,     "Osprey-100" },
163 	{ 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" },
164 	{ 0xff020070, BTTV_BOARD_OSPREY500,     "Osprey-500" },
165 	{ 0xff030070, BTTV_BOARD_OSPREY2000,    "Osprey-2000" },
166 	{ 0xff040070, BTTV_BOARD_OSPREY540,     "Osprey-540" },
167 	{ 0xff070070, BTTV_BOARD_OSPREY440,     "Osprey-440" },
168 
169 	{ 0x00011002, BTTV_BOARD_ATI_TVWONDER,  "ATI TV Wonder" },
170 	{ 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" },
171 
172 	{ 0x6606107d, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
173 	{ 0x6607107d, BTTV_BOARD_WINFASTVC100,  "Leadtek WinFast VC 100" },
174 	{ 0x6609107d, BTTV_BOARD_WINFAST2000,   "Leadtek TV 2000 XP" },
175 	{ 0x263610b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
176 	{ 0x264510b4, BTTV_BOARD_STB2,          "STB TV PCI FM, Gateway P/N 6000704" },
177 	{ 0x402010fc, BTTV_BOARD_GVBCTV3PCI,    "I-O Data Co. GV-BCTV3/PCI" },
178 	{ 0x405010fc, BTTV_BOARD_GVBCTV4PCI,    "I-O Data Co. GV-BCTV4/PCI" },
179 	{ 0x407010fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
180 	{ 0xd01810fc, BTTV_BOARD_GVBCTV5PCI,    "I-O Data Co. GV-BCTV5/PCI" },
181 
182 	{ 0x001211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
183 	/* some cards ship with byteswapped IDs ... */
184 	{ 0x1200bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
185 	{ 0xff00bd11, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV [bswap]" },
186 	/* this seems to happen as well ... */
187 	{ 0xff1211bd, BTTV_BOARD_PINNACLE,      "Pinnacle PCTV" },
188 
189 	{ 0x3000121a, BTTV_BOARD_VOODOOTV_200,  "3Dfx VoodooTV 200" },
190 	{ 0x263710b4, BTTV_BOARD_VOODOOTV_FM,   "3Dfx VoodooTV FM" },
191 	{ 0x3060121a, BTTV_BOARD_STB2,	  "3Dfx VoodooTV 100/ STB OEM" },
192 
193 	{ 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" },
194 	{ 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" },
195 	{ 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" },
196 	{ 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" },
197 	{ 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" },
198 	{ 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" },
199 	{ 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS,  "Phoebe TV Master (CPH060)" },
200 
201 	{ 0x00011461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
202 	{ 0x00021461, BTTV_BOARD_AVERMEDIA98,   "AVermedia TVCapture 98" },
203 	{ 0x00031461, BTTV_BOARD_AVPHONE98,     "AVerMedia TVPhone98" },
204 	{ 0x00041461, BTTV_BOARD_AVERMEDIA98,   "AVerMedia TVCapture 98" },
205 	{ 0x03001461, BTTV_BOARD_AVERMEDIA98,   "VDOMATE TV TUNER CARD" },
206 
207 	{ 0x1117153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL B/G)" },
208 	{ 0x1118153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL B/G)" },
209 	{ 0x1119153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Philips PAL I)" },
210 	{ 0x111a153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (Temic PAL I)" },
211 
212 	{ 0x1123153b, BTTV_BOARD_TERRATVRADIO,  "Terratec TV Radio+" },
213 	{ 0x1127153b, BTTV_BOARD_TERRATV,       "Terratec TV+ (V1.05)"    },
214 	/* clashes with FlyVideo
215 	 *{ 0x18521852, BTTV_BOARD_TERRATV,     "Terratec TV+ (V1.10)"    }, */
216 	{ 0x1134153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue (LR102)" },
217 	{ 0x1135153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* LR102 */
218 	{ 0x5018153b, BTTV_BOARD_TERRATVALUE,   "Terratec TValue" },       /* ?? */
219 	{ 0xff3b153b, BTTV_BOARD_TERRATVALUER,  "Terratec TValue Radio" }, /* ?? */
220 
221 	{ 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
222 	{ 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" },
223 	{ 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
224 	{ 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
225 	{ 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" },
226 
227 	{ 0x1430aa00, BTTV_BOARD_PV143,         "Provideo PV143A" },
228 	{ 0x1431aa00, BTTV_BOARD_PV143,         "Provideo PV143B" },
229 	{ 0x1432aa00, BTTV_BOARD_PV143,         "Provideo PV143C" },
230 	{ 0x1433aa00, BTTV_BOARD_PV143,         "Provideo PV143D" },
231 	{ 0x1433aa03, BTTV_BOARD_PV143,         "Security Eyes" },
232 
233 	{ 0x1460aa00, BTTV_BOARD_PV150,         "Provideo PV150A-1" },
234 	{ 0x1461aa01, BTTV_BOARD_PV150,         "Provideo PV150A-2" },
235 	{ 0x1462aa02, BTTV_BOARD_PV150,         "Provideo PV150A-3" },
236 	{ 0x1463aa03, BTTV_BOARD_PV150,         "Provideo PV150A-4" },
237 
238 	{ 0x1464aa04, BTTV_BOARD_PV150,         "Provideo PV150B-1" },
239 	{ 0x1465aa05, BTTV_BOARD_PV150,         "Provideo PV150B-2" },
240 	{ 0x1466aa06, BTTV_BOARD_PV150,         "Provideo PV150B-3" },
241 	{ 0x1467aa07, BTTV_BOARD_PV150,         "Provideo PV150B-4" },
242 
243 	{ 0xa132ff00, BTTV_BOARD_IVC100,        "IVC-100"  },
244 	{ 0xa1550000, BTTV_BOARD_IVC200,        "IVC-200"  },
245 	{ 0xa1550001, BTTV_BOARD_IVC200,        "IVC-200"  },
246 	{ 0xa1550002, BTTV_BOARD_IVC200,        "IVC-200"  },
247 	{ 0xa1550003, BTTV_BOARD_IVC200,        "IVC-200"  },
248 	{ 0xa1550100, BTTV_BOARD_IVC200,        "IVC-200G" },
249 	{ 0xa1550101, BTTV_BOARD_IVC200,        "IVC-200G" },
250 	{ 0xa1550102, BTTV_BOARD_IVC200,        "IVC-200G" },
251 	{ 0xa1550103, BTTV_BOARD_IVC200,        "IVC-200G" },
252 	{ 0xa1550800, BTTV_BOARD_IVC200,        "IVC-200"  },
253 	{ 0xa1550801, BTTV_BOARD_IVC200,        "IVC-200"  },
254 	{ 0xa1550802, BTTV_BOARD_IVC200,        "IVC-200"  },
255 	{ 0xa1550803, BTTV_BOARD_IVC200,        "IVC-200"  },
256 	{ 0xa182ff00, BTTV_BOARD_IVC120,        "IVC-120G" },
257 	{ 0xa182ff01, BTTV_BOARD_IVC120,        "IVC-120G" },
258 	{ 0xa182ff02, BTTV_BOARD_IVC120,        "IVC-120G" },
259 	{ 0xa182ff03, BTTV_BOARD_IVC120,        "IVC-120G" },
260 	{ 0xa182ff04, BTTV_BOARD_IVC120,        "IVC-120G" },
261 	{ 0xa182ff05, BTTV_BOARD_IVC120,        "IVC-120G" },
262 	{ 0xa182ff06, BTTV_BOARD_IVC120,        "IVC-120G" },
263 	{ 0xa182ff07, BTTV_BOARD_IVC120,        "IVC-120G" },
264 	{ 0xa182ff08, BTTV_BOARD_IVC120,        "IVC-120G" },
265 	{ 0xa182ff09, BTTV_BOARD_IVC120,        "IVC-120G" },
266 	{ 0xa182ff0a, BTTV_BOARD_IVC120,        "IVC-120G" },
267 	{ 0xa182ff0b, BTTV_BOARD_IVC120,        "IVC-120G" },
268 	{ 0xa182ff0c, BTTV_BOARD_IVC120,        "IVC-120G" },
269 	{ 0xa182ff0d, BTTV_BOARD_IVC120,        "IVC-120G" },
270 	{ 0xa182ff0e, BTTV_BOARD_IVC120,        "IVC-120G" },
271 	{ 0xa182ff0f, BTTV_BOARD_IVC120,        "IVC-120G" },
272 	{ 0xf0500000, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
273 	{ 0xf0500001, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
274 	{ 0xf0500002, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
275 	{ 0xf0500003, BTTV_BOARD_IVCE8784,      "IVCE-8784" },
276 
277 	{ 0x41424344, BTTV_BOARD_GRANDTEC,      "GrandTec Multi Capture" },
278 	{ 0x01020304, BTTV_BOARD_XGUARD,        "Grandtec Grand X-Guard" },
279 
280 	{ 0x18501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
281 	{ 0xa0501851, BTTV_BOARD_CHRONOS_VS2,   "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" },
282 	{ 0x18511851, BTTV_BOARD_FLYVIDEO98EZ,  "FlyVideo 98EZ (LR51)/ CyberMail AV" },
283 	{ 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" },
284 	{ 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" },
285 	{ 0x18501f7f, BTTV_BOARD_FLYVIDEO_98,   "Lifeview Flyvideo 98" },
286 
287 	{ 0x010115cb, BTTV_BOARD_GMV1,          "AG GMV1" },
288 	{ 0x010114c7, BTTV_BOARD_MODTEC_205,    "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" },
289 
290 	{ 0x10b42636, BTTV_BOARD_HAUPPAUGE878,  "STB ???" },
291 	{ 0x217d6606, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
292 	{ 0xfff6f6ff, BTTV_BOARD_WINFAST2000,   "Leadtek WinFast TV 2000" },
293 	{ 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" },
294 	{ 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" },
295 	{ 0x00790e11, BTTV_BOARD_WINDVR,        "Canopus WinDVR PCI" },
296 	{ 0xa0fca1a0, BTTV_BOARD_ZOLTRIX,       "Face to Face Tvmax" },
297 	{ 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" },
298 	{ 0x146caa0c, BTTV_BOARD_PV951,         "ituner spectra8" },
299 	{ 0x200a1295, BTTV_BOARD_PXC200,        "ImageNation PXC200A" },
300 
301 	{ 0x40111554, BTTV_BOARD_PV_BT878P_9B,  "Prolink Pixelview PV-BT" },
302 	{ 0x17de0a01, BTTV_BOARD_KWORLD,        "Mecer TV/FM/Video Tuner" },
303 
304 	{ 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" },
305 	{ 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" },
306 	{ 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" },
307 	{ 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" },
308 
309 	{ 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" },
310 
311 	{ 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" },
312 	{ 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" },
313 
314 	/* likely broken, vendor id doesn't match the other magic views ...
315 	 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */
316 
317 	/* Duplicate PCI ID, reconfigure for this board during the eeprom read.
318 	* { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB,  "Hauppauge ImpactVCB" }, */
319 
320 	{ 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2,	"Conceptronic CTVFMi v2"},
321 
322 	/* DVB cards (using pci function .1 for mpeg data xfer) */
323 	{ 0x001c11bd, BTTV_BOARD_PINNACLESAT,   "Pinnacle PCTV Sat" },
324 	{ 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" },
325 	{ 0x20007063, BTTV_BOARD_PC_HDTV,       "pcHDTV HD-2000 TV"},
326 	{ 0x002611bd, BTTV_BOARD_TWINHAN_DST,   "Pinnacle PCTV SAT CI" },
327 	{ 0x00011822, BTTV_BOARD_TWINHAN_DST,   "Twinhan VisionPlus DVB" },
328 	{ 0xfc00270f, BTTV_BOARD_TWINHAN_DST,   "ChainTech digitop DST-1000 DVB-S" },
329 	{ 0x07711461, BTTV_BOARD_AVDVBT_771,    "AVermedia AverTV DVB-T 771" },
330 	{ 0x07611461, BTTV_BOARD_AVDVBT_761,    "AverMedia AverTV DVB-T 761" },
331 	{ 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE,    "DViCO FusionHDTV DVB-T Lite" },
332 	{ 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE,    "Ultraview DVB-T Lite" },
333 	{ 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE,    "DViCO FusionHDTV 5 Lite" },
334 	{ 0x00261822, BTTV_BOARD_TWINHAN_DST,	"DNTV Live! Mini "},
335 	{ 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2,	"DViCO FusionHDTV 2" },
336 	{ 0x763c008a, BTTV_BOARD_GEOVISION_GV600,	"GeoVision GV-600" },
337 	{ 0x18011000, BTTV_BOARD_ENLTV_FM_2,	"Encore ENL TV-FM-2" },
338 	{ 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" },
339 	{ 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL,	"GeoVision GV-800(S) (slave)" },
340 	{ 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL,	"GeoVision GV-800(S) (slave)" },
341 	{ 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL,	"GeoVision GV-800(S) (slave)" },
342 
343 	{ 0x15401830, BTTV_BOARD_PV183,         "Provideo PV183-1" },
344 	{ 0x15401831, BTTV_BOARD_PV183,         "Provideo PV183-2" },
345 	{ 0x15401832, BTTV_BOARD_PV183,         "Provideo PV183-3" },
346 	{ 0x15401833, BTTV_BOARD_PV183,         "Provideo PV183-4" },
347 	{ 0x15401834, BTTV_BOARD_PV183,         "Provideo PV183-5" },
348 	{ 0x15401835, BTTV_BOARD_PV183,         "Provideo PV183-6" },
349 	{ 0x15401836, BTTV_BOARD_PV183,         "Provideo PV183-7" },
350 	{ 0x15401837, BTTV_BOARD_PV183,         "Provideo PV183-8" },
351 	{ 0x3116f200, BTTV_BOARD_TVT_TD3116,	"Tongwei Video Technology TD-3116" },
352 	{ 0x02280279, BTTV_BOARD_APOSONIC_WDVR, "Aposonic W-DVR" },
353 	{ 0, -1, NULL }
354 };
355 
356 /* ----------------------------------------------------------------------- */
357 /* array with description for bt848 / bt878 tv/grabber cards               */
358 
359 struct tvcard bttv_tvcards[] = {
360 	/* ---- card 0x00 ---------------------------------- */
361 	[BTTV_BOARD_UNKNOWN] = {
362 		.name		= " *** UNKNOWN/GENERIC *** ",
363 		.video_inputs	= 4,
364 		.svhs		= 2,
365 		.muxsel		= MUXSEL(2, 3, 1, 0),
366 		.tuner_type	= UNSET,
367 		.tuner_addr	= ADDR_UNSET,
368 	},
369 	[BTTV_BOARD_MIRO] = {
370 		.name		= "MIRO PCTV",
371 		.video_inputs	= 4,
372 		/* .audio_inputs= 1, */
373 		.svhs		= 2,
374 		.gpiomask	= 15,
375 		.muxsel		= MUXSEL(2, 3, 1, 1),
376 		.gpiomux	= { 2, 0, 0, 0 },
377 		.gpiomute	= 10,
378 		.tuner_type	= UNSET,
379 		.tuner_addr	= ADDR_UNSET,
380 	},
381 	[BTTV_BOARD_HAUPPAUGE] = {
382 		.name		= "Hauppauge (bt848)",
383 		.video_inputs	= 4,
384 		/* .audio_inputs= 1, */
385 		.svhs		= 2,
386 		.gpiomask	= 7,
387 		.muxsel		= MUXSEL(2, 3, 1, 1),
388 		.gpiomux	= { 0, 1, 2, 3 },
389 		.gpiomute	= 4,
390 		.tuner_type	= UNSET,
391 		.tuner_addr	= ADDR_UNSET,
392 	},
393 	[BTTV_BOARD_STB] = {
394 		.name		= "STB, Gateway P/N 6000699 (bt848)",
395 		.video_inputs	= 3,
396 		/* .audio_inputs= 1, */
397 		.svhs		= 2,
398 		.gpiomask	= 7,
399 		.muxsel		= MUXSEL(2, 3, 1, 1),
400 		.gpiomux	= { 4, 0, 2, 3 },
401 		.gpiomute	= 1,
402 		.no_msp34xx	= 1,
403 		.tuner_type     = TUNER_PHILIPS_NTSC,
404 		.tuner_addr	= ADDR_UNSET,
405 		.pll            = PLL_28,
406 		.has_radio      = 1,
407 	},
408 
409 	/* ---- card 0x04 ---------------------------------- */
410 	[BTTV_BOARD_INTEL] = {
411 		.name		= "Intel Create and Share PCI/ Smart Video Recorder III",
412 		.video_inputs	= 4,
413 		/* .audio_inputs= 0, */
414 		.svhs		= 2,
415 		.gpiomask	= 0,
416 		.muxsel		= MUXSEL(2, 3, 1, 1),
417 		.gpiomux	= { 0 },
418 		.tuner_type	= TUNER_ABSENT,
419 		.tuner_addr	= ADDR_UNSET,
420 	},
421 	[BTTV_BOARD_DIAMOND] = {
422 		.name		= "Diamond DTV2000",
423 		.video_inputs	= 4,
424 		/* .audio_inputs= 1, */
425 		.svhs		= 2,
426 		.gpiomask	= 3,
427 		.muxsel		= MUXSEL(2, 3, 1, 0),
428 		.gpiomux	= { 0, 1, 0, 1 },
429 		.gpiomute	= 3,
430 		.tuner_type	= UNSET,
431 		.tuner_addr	= ADDR_UNSET,
432 	},
433 	[BTTV_BOARD_AVERMEDIA] = {
434 		.name		= "AVerMedia TVPhone",
435 		.video_inputs	= 3,
436 		/* .audio_inputs= 1, */
437 		.svhs		= 3,
438 		.muxsel		= MUXSEL(2, 3, 1, 1),
439 		.gpiomask	= 0x0f,
440 		.gpiomux	= { 0x0c, 0x04, 0x08, 0x04 },
441 		/*                0x04 for some cards ?? */
442 		.tuner_type	= UNSET,
443 		.tuner_addr	= ADDR_UNSET,
444 		.audio_mode_gpio= avermedia_tvphone_audio,
445 		.has_remote     = 1,
446 	},
447 	[BTTV_BOARD_MATRIX_VISION] = {
448 		.name		= "MATRIX-Vision MV-Delta",
449 		.video_inputs	= 5,
450 		/* .audio_inputs= 1, */
451 		.svhs		= 3,
452 		.gpiomask	= 0,
453 		.muxsel		= MUXSEL(2, 3, 1, 0, 0),
454 		.gpiomux	= { 0 },
455 		.tuner_type	= TUNER_ABSENT,
456 		.tuner_addr	= ADDR_UNSET,
457 	},
458 
459 	/* ---- card 0x08 ---------------------------------- */
460 	[BTTV_BOARD_FLYVIDEO] = {
461 		.name		= "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26",
462 		.video_inputs	= 4,
463 		/* .audio_inputs= 1, */
464 		.svhs		= 2,
465 		.gpiomask	= 0xc00,
466 		.muxsel		= MUXSEL(2, 3, 1, 1),
467 		.gpiomux	= { 0, 0xc00, 0x800, 0x400 },
468 		.gpiomute	= 0xc00,
469 		.pll		= PLL_28,
470 		.tuner_type	= UNSET,
471 		.tuner_addr	= ADDR_UNSET,
472 	},
473 	[BTTV_BOARD_TURBOTV] = {
474 		.name		= "IMS/IXmicro TurboTV",
475 		.video_inputs	= 3,
476 		/* .audio_inputs= 1, */
477 		.svhs		= 2,
478 		.gpiomask	= 3,
479 		.muxsel		= MUXSEL(2, 3, 1, 1),
480 		.gpiomux	= { 1, 1, 2, 3 },
481 		.pll		= PLL_28,
482 		.tuner_type	= TUNER_TEMIC_PAL,
483 		.tuner_addr	= ADDR_UNSET,
484 	},
485 	[BTTV_BOARD_HAUPPAUGE878] = {
486 		.name		= "Hauppauge (bt878)",
487 		.video_inputs	= 4,
488 		/* .audio_inputs= 1, */
489 		.svhs		= 2,
490 		.gpiomask	= 0x0f, /* old: 7 */
491 		.muxsel		= MUXSEL(2, 0, 1, 1),
492 		.gpiomux	= { 0, 1, 2, 3 },
493 		.gpiomute	= 4,
494 		.pll		= PLL_28,
495 		.tuner_type	= UNSET,
496 		.tuner_addr	= ADDR_UNSET,
497 	},
498 	[BTTV_BOARD_MIROPRO] = {
499 		.name		= "MIRO PCTV pro",
500 		.video_inputs	= 3,
501 		/* .audio_inputs= 1, */
502 		.svhs		= 2,
503 		.gpiomask	= 0x3014f,
504 		.muxsel		= MUXSEL(2, 3, 1, 1),
505 		.gpiomux	= { 0x20001,0x10001, 0, 0 },
506 		.gpiomute	= 10,
507 		.tuner_type	= UNSET,
508 		.tuner_addr	= ADDR_UNSET,
509 	},
510 
511 	/* ---- card 0x0c ---------------------------------- */
512 	[BTTV_BOARD_ADSTECH_TV] = {
513 		.name		= "ADS Technologies Channel Surfer TV (bt848)",
514 		.video_inputs	= 3,
515 		/* .audio_inputs= 1, */
516 		.svhs		= 2,
517 		.gpiomask	= 15,
518 		.muxsel		= MUXSEL(2, 3, 1, 1),
519 		.gpiomux	= { 13, 14, 11, 7 },
520 		.tuner_type	= UNSET,
521 		.tuner_addr	= ADDR_UNSET,
522 	},
523 	[BTTV_BOARD_AVERMEDIA98] = {
524 		.name		= "AVerMedia TVCapture 98",
525 		.video_inputs	= 3,
526 		/* .audio_inputs= 4, */
527 		.svhs		= 2,
528 		.gpiomask	= 15,
529 		.muxsel		= MUXSEL(2, 3, 1, 1),
530 		.gpiomux	= { 13, 14, 11, 7 },
531 		.msp34xx_alt    = 1,
532 		.pll		= PLL_28,
533 		.tuner_type	= TUNER_PHILIPS_PAL,
534 		.tuner_addr	= ADDR_UNSET,
535 		.audio_mode_gpio= avermedia_tv_stereo_audio,
536 		.no_gpioirq     = 1,
537 	},
538 	[BTTV_BOARD_VHX] = {
539 		.name		= "Aimslab Video Highway Xtreme (VHX)",
540 		.video_inputs	= 3,
541 		/* .audio_inputs= 1, */
542 		.svhs		= 2,
543 		.gpiomask	= 7,
544 		.muxsel		= MUXSEL(2, 3, 1, 1),
545 		.gpiomux	= { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */
546 		.gpiomute	= 4,
547 		.pll		= PLL_28,
548 		.tuner_type	= UNSET,
549 		.tuner_addr	= ADDR_UNSET,
550 	},
551 	[BTTV_BOARD_ZOLTRIX] = {
552 		.name		= "Zoltrix TV-Max",
553 		.video_inputs	= 3,
554 		/* .audio_inputs= 1, */
555 		.svhs		= 2,
556 		.gpiomask	= 15,
557 		.muxsel		= MUXSEL(2, 3, 1, 1),
558 		.gpiomux	= { 0, 0, 1, 0 },
559 		.gpiomute	= 10,
560 		.tuner_type	= UNSET,
561 		.tuner_addr	= ADDR_UNSET,
562 	},
563 
564 	/* ---- card 0x10 ---------------------------------- */
565 	[BTTV_BOARD_PIXVIEWPLAYTV] = {
566 		.name		= "Prolink Pixelview PlayTV (bt878)",
567 		.video_inputs	= 3,
568 		/* .audio_inputs= 1, */
569 		.svhs		= 2,
570 		.gpiomask	= 0x01fe00,
571 		.muxsel		= MUXSEL(2, 3, 1, 1),
572 		/* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */
573 		.gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
574 		.gpiomute	= 0x002000,
575 		.pll		= PLL_28,
576 		.tuner_type	= UNSET,
577 		.tuner_addr     = ADDR_UNSET,
578 	},
579 	[BTTV_BOARD_WINVIEW_601] = {
580 		.name		= "Leadtek WinView 601",
581 		.video_inputs	= 3,
582 		/* .audio_inputs= 1, */
583 		.svhs		= 2,
584 		.gpiomask	= 0x8300f8,
585 		.muxsel		= MUXSEL(2, 3, 1, 1, 0),
586 		.gpiomux	= { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 },
587 		.gpiomute	= 0xcfa007,
588 		.tuner_type	= UNSET,
589 		.tuner_addr	= ADDR_UNSET,
590 		.volume_gpio	= winview_volume,
591 		.has_radio	= 1,
592 	},
593 	[BTTV_BOARD_AVEC_INTERCAP] = {
594 		.name		= "AVEC Intercapture",
595 		.video_inputs	= 3,
596 		/* .audio_inputs= 2, */
597 		.svhs		= 2,
598 		.gpiomask	= 0,
599 		.muxsel		= MUXSEL(2, 3, 1, 1),
600 		.gpiomux	= { 1, 0, 0, 0 },
601 		.tuner_type	= UNSET,
602 		.tuner_addr	= ADDR_UNSET,
603 	},
604 	[BTTV_BOARD_LIFE_FLYKIT] = {
605 		.name		= "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)",
606 		.video_inputs	= 4,
607 		/* .audio_inputs= 1, */
608 		.svhs		= NO_SVHS,
609 		.gpiomask	= 0x8dff00,
610 		.muxsel		= MUXSEL(2, 3, 1, 1),
611 		.gpiomux	= { 0 },
612 		.no_msp34xx	= 1,
613 		.tuner_type	= TUNER_ABSENT,
614 		.tuner_addr	= ADDR_UNSET,
615 	},
616 
617 	/* ---- card 0x14 ---------------------------------- */
618 	[BTTV_BOARD_CEI_RAFFLES] = {
619 		.name		= "CEI Raffles Card",
620 		.video_inputs	= 3,
621 		/* .audio_inputs= 3, */
622 		.svhs		= 2,
623 		.muxsel		= MUXSEL(2, 3, 1, 1),
624 		.tuner_type	= UNSET,
625 		.tuner_addr	= ADDR_UNSET,
626 	},
627 	[BTTV_BOARD_CONFERENCETV] = {
628 		.name		= "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50",
629 		.video_inputs	= 4,
630 		/* .audio_inputs= 2,  tuner, line in */
631 		.svhs		= 2,
632 		.gpiomask	= 0x1800,
633 		.muxsel		= MUXSEL(2, 3, 1, 1),
634 		.gpiomux	= { 0, 0x800, 0x1000, 0x1000 },
635 		.gpiomute	= 0x1800,
636 		.pll		= PLL_28,
637 		.tuner_type	= TUNER_PHILIPS_PAL_I,
638 		.tuner_addr	= ADDR_UNSET,
639 	},
640 	[BTTV_BOARD_PHOEBE_TVMAS] = {
641 		.name		= "Askey CPH050/ Phoebe Tv Master + FM",
642 		.video_inputs	= 3,
643 		/* .audio_inputs= 1, */
644 		.svhs		= 2,
645 		.gpiomask	= 0xc00,
646 		.muxsel		= MUXSEL(2, 3, 1, 1),
647 		.gpiomux	= { 0, 1, 0x800, 0x400 },
648 		.gpiomute	= 0xc00,
649 		.pll		= PLL_28,
650 		.tuner_type	= UNSET,
651 		.tuner_addr	= ADDR_UNSET,
652 	},
653 	[BTTV_BOARD_MODTEC_205] = {
654 		.name		= "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878",
655 		.video_inputs	= 3,
656 		/* .audio_inputs= 1, */
657 		.svhs		= NO_SVHS,
658 		.has_dig_in	= 1,
659 		.gpiomask	= 7,
660 		.muxsel		= MUXSEL(2, 3, 0), /* input 2 is digital */
661 		/* .digital_mode= DIGITAL_MODE_CAMERA, */
662 		.gpiomux	= { 0, 0, 0, 0 },
663 		.no_msp34xx	= 1,
664 		.pll            = PLL_28,
665 		.tuner_type     = TUNER_ALPS_TSBB5_PAL_I,
666 		.tuner_addr	= ADDR_UNSET,
667 	},
668 
669 	/* ---- card 0x18 ---------------------------------- */
670 	[BTTV_BOARD_MAGICTVIEW061] = {
671 		.name		= "Askey CPH05X/06X (bt878) [many vendors]",
672 		.video_inputs	= 3,
673 		/* .audio_inputs= 1, */
674 		.svhs		= 2,
675 		.gpiomask	= 0xe00,
676 		.muxsel		= MUXSEL(2, 3, 1, 1),
677 		.gpiomux	= {0x400, 0x400, 0x400, 0x400 },
678 		.gpiomute	= 0xc00,
679 		.pll		= PLL_28,
680 		.tuner_type	= UNSET,
681 		.tuner_addr	= ADDR_UNSET,
682 		.has_remote     = 1,
683 		.has_radio	= 1,  /* not every card has radio */
684 	},
685 	[BTTV_BOARD_VOBIS_BOOSTAR] = {
686 		.name           = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar",
687 		.video_inputs	= 3,
688 		/* .audio_inputs= 1, */
689 		.svhs		= 2,
690 		.gpiomask       = 0x1f0fff,
691 		.muxsel		= MUXSEL(2, 3, 1, 1),
692 		.gpiomux        = { 0x20000, 0x30000, 0x10000, 0 },
693 		.gpiomute	= 0x40000,
694 		.tuner_type	= TUNER_PHILIPS_PAL,
695 		.tuner_addr	= ADDR_UNSET,
696 		.audio_mode_gpio= terratv_audio,
697 	},
698 	[BTTV_BOARD_HAUPPAUG_WCAM] = {
699 		.name		= "Hauppauge WinCam newer (bt878)",
700 		.video_inputs	= 4,
701 		/* .audio_inputs= 1, */
702 		.svhs		= 3,
703 		.gpiomask	= 7,
704 		.muxsel		= MUXSEL(2, 0, 1, 1),
705 		.gpiomux	= { 0, 1, 2, 3 },
706 		.gpiomute	= 4,
707 		.tuner_type	= UNSET,
708 		.tuner_addr	= ADDR_UNSET,
709 	},
710 	[BTTV_BOARD_MAXI] = {
711 		.name		= "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50",
712 		.video_inputs	= 4,
713 		/* .audio_inputs= 2, */
714 		.svhs		= 2,
715 		.gpiomask	= 0x1800,
716 		.muxsel		= MUXSEL(2, 3, 1, 1),
717 		.gpiomux	= { 0, 0x800, 0x1000, 0x1000 },
718 		.gpiomute	= 0x1800,
719 		.pll            = PLL_28,
720 		.tuner_type	= TUNER_PHILIPS_SECAM,
721 		.tuner_addr	= ADDR_UNSET,
722 	},
723 
724 	/* ---- card 0x1c ---------------------------------- */
725 	[BTTV_BOARD_TERRATV] = {
726 		.name           = "Terratec TerraTV+ Version 1.1 (bt878)",
727 		.video_inputs	= 3,
728 		/* .audio_inputs= 1, */
729 		.svhs		= 2,
730 		.gpiomask	= 0x1f0fff,
731 		.muxsel		= MUXSEL(2, 3, 1, 1),
732 		.gpiomux	= { 0x20000, 0x30000, 0x10000, 0x00000 },
733 		.gpiomute	= 0x40000,
734 		.tuner_type	= TUNER_PHILIPS_PAL,
735 		.tuner_addr	= ADDR_UNSET,
736 		.audio_mode_gpio= terratv_audio,
737 		/* GPIO wiring:
738 		External 20 pin connector (for Active Radio Upgrade board)
739 		gpio00: i2c-sda
740 		gpio01: i2c-scl
741 		gpio02: om5610-data
742 		gpio03: om5610-clk
743 		gpio04: om5610-wre
744 		gpio05: om5610-stereo
745 		gpio06: rds6588-davn
746 		gpio07: Pin 7 n.c.
747 		gpio08: nIOW
748 		gpio09+10: nIOR, nSEL ?? (bt878)
749 			gpio09: nIOR (bt848)
750 			gpio10: nSEL (bt848)
751 		Sound Routing:
752 		gpio16: u2-A0 (1st 4052bt)
753 		gpio17: u2-A1
754 		gpio18: u2-nEN
755 		gpio19: u4-A0 (2nd 4052)
756 		gpio20: u4-A1
757 			u4-nEN - GND
758 		Btspy:
759 			00000 : Cdrom (internal audio input)
760 			10000 : ext. Video audio input
761 			20000 : TV Mono
762 			a0000 : TV Mono/2
763 		1a0000 : TV Stereo
764 			30000 : Radio
765 			40000 : Mute
766 	*/
767 
768 	},
769 	[BTTV_BOARD_PXC200] = {
770 		/* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */
771 		.name		= "Imagenation PXC200",
772 		.video_inputs	= 5,
773 		/* .audio_inputs= 1, */
774 		.svhs		= 1, /* was: 4 */
775 		.gpiomask	= 0,
776 		.muxsel		= MUXSEL(2, 3, 1, 0, 0),
777 		.gpiomux	= { 0 },
778 		.tuner_type	= TUNER_ABSENT,
779 		.tuner_addr	= ADDR_UNSET,
780 		.muxsel_hook    = PXC200_muxsel,
781 
782 	},
783 	[BTTV_BOARD_FLYVIDEO_98] = {
784 		.name		= "Lifeview FlyVideo 98 LR50",
785 		.video_inputs	= 4,
786 		/* .audio_inputs= 1, */
787 		.svhs		= 2,
788 		.gpiomask	= 0x1800,  /* 0x8dfe00 */
789 		.muxsel		= MUXSEL(2, 3, 1, 1),
790 		.gpiomux	= { 0, 0x0800, 0x1000, 0x1000 },
791 		.gpiomute	= 0x1800,
792 		.pll            = PLL_28,
793 		.tuner_type	= UNSET,
794 		.tuner_addr	= ADDR_UNSET,
795 	},
796 	[BTTV_BOARD_IPROTV] = {
797 		.name		= "Formac iProTV, Formac ProTV I (bt848)",
798 		.video_inputs	= 4,
799 		/* .audio_inputs= 1, */
800 		.svhs		= 3,
801 		.gpiomask	= 1,
802 		.muxsel		= MUXSEL(2, 3, 1, 1),
803 		.gpiomux	= { 1, 0, 0, 0 },
804 		.pll            = PLL_28,
805 		.tuner_type	= TUNER_PHILIPS_PAL,
806 		.tuner_addr	= ADDR_UNSET,
807 	},
808 
809 	/* ---- card 0x20 ---------------------------------- */
810 	[BTTV_BOARD_INTEL_C_S_PCI] = {
811 		.name		= "Intel Create and Share PCI/ Smart Video Recorder III",
812 		.video_inputs	= 4,
813 		/* .audio_inputs= 0, */
814 		.svhs		= 2,
815 		.gpiomask	= 0,
816 		.muxsel		= MUXSEL(2, 3, 1, 1),
817 		.gpiomux	= { 0 },
818 		.tuner_type	= TUNER_ABSENT,
819 		.tuner_addr	= ADDR_UNSET,
820 	},
821 	[BTTV_BOARD_TERRATVALUE] = {
822 		.name           = "Terratec TerraTValue Version Bt878",
823 		.video_inputs	= 3,
824 		/* .audio_inputs= 1, */
825 		.svhs		= 2,
826 		.gpiomask	= 0xffff00,
827 		.muxsel		= MUXSEL(2, 3, 1, 1),
828 		.gpiomux	= { 0x500, 0, 0x300, 0x900 },
829 		.gpiomute	= 0x900,
830 		.pll		= PLL_28,
831 		.tuner_type	= TUNER_PHILIPS_PAL,
832 		.tuner_addr	= ADDR_UNSET,
833 	},
834 	[BTTV_BOARD_WINFAST2000] = {
835 		.name		= "Leadtek WinFast 2000/ WinFast 2000 XP",
836 		.video_inputs	= 4,
837 		/* .audio_inputs= 1, */
838 		.svhs		= 2,
839 		/* TV, CVid, SVid, CVid over SVid connector */
840 		.muxsel		= MUXSEL(2, 3, 1, 1, 0),
841 		/* Alexander Varakin <avarakin@hotmail.com> [stereo version] */
842 		.gpiomask	= 0xb33000,
843 		.gpiomux	= { 0x122000,0x1000,0x0000,0x620000 },
844 		.gpiomute	= 0x800000,
845 		/* Audio Routing for "WinFast 2000 XP" (no tv stereo !)
846 			gpio23 -- hef4052:nEnable (0x800000)
847 			gpio12 -- hef4052:A1
848 			gpio13 -- hef4052:A0
849 		0x0000: external audio
850 		0x1000: FM
851 		0x2000: TV
852 		0x3000: n.c.
853 		Note: There exists another variant "Winfast 2000" with tv stereo !?
854 		Note: eeprom only contains FF and pci subsystem id 107d:6606
855 		*/
856 		.pll		= PLL_28,
857 		.has_radio	= 1,
858 		.tuner_type	= TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */
859 		.tuner_addr	= ADDR_UNSET,
860 		.audio_mode_gpio= winfast2000_audio,
861 		.has_remote     = 1,
862 	},
863 	[BTTV_BOARD_CHRONOS_VS2] = {
864 		.name		= "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II",
865 		.video_inputs	= 4,
866 		/* .audio_inputs= 3, */
867 		.svhs		= 2,
868 		.gpiomask	= 0x1800,
869 		.muxsel		= MUXSEL(2, 3, 1, 1),
870 		.gpiomux	= { 0, 0x800, 0x1000, 0x1000 },
871 		.gpiomute	= 0x1800,
872 		.pll		= PLL_28,
873 		.tuner_type	= UNSET,
874 		.tuner_addr	= ADDR_UNSET,
875 	},
876 
877 	/* ---- card 0x24 ---------------------------------- */
878 	[BTTV_BOARD_TYPHOON_TVIEW] = {
879 		.name		= "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner",
880 		.video_inputs	= 4,
881 		/* .audio_inputs= 3, */
882 		.svhs		= 2,
883 		.gpiomask	= 0x1800,
884 		.muxsel		= MUXSEL(2, 3, 1, 1),
885 		.gpiomux	= { 0, 0x800, 0x1000, 0x1000 },
886 		.gpiomute	= 0x1800,
887 		.pll		= PLL_28,
888 		.tuner_type	= UNSET,
889 		.tuner_addr	= ADDR_UNSET,
890 		.has_radio	= 1,
891 	},
892 	[BTTV_BOARD_PXELVWPLTVPRO] = {
893 		.name		= "Prolink PixelView PlayTV pro",
894 		.video_inputs	= 3,
895 		/* .audio_inputs= 1, */
896 		.svhs		= 2,
897 		.gpiomask	= 0xff,
898 		.muxsel		= MUXSEL(2, 3, 1, 1),
899 		.gpiomux	= { 0x21, 0x20, 0x24, 0x2c },
900 		.gpiomute	= 0x29,
901 		.no_msp34xx	= 1,
902 		.pll		= PLL_28,
903 		.tuner_type	= UNSET,
904 		.tuner_addr	= ADDR_UNSET,
905 	},
906 	[BTTV_BOARD_MAGICTVIEW063] = {
907 		.name		= "Askey CPH06X TView99",
908 		.video_inputs	= 4,
909 		/* .audio_inputs= 1, */
910 		.svhs		= 2,
911 		.gpiomask	= 0x551e00,
912 		.muxsel		= MUXSEL(2, 3, 1, 0),
913 		.gpiomux	= { 0x551400, 0x551200, 0, 0 },
914 		.gpiomute	= 0x551c00,
915 		.pll		= PLL_28,
916 		.tuner_type	= TUNER_PHILIPS_PAL_I,
917 		.tuner_addr	= ADDR_UNSET,
918 		.has_remote     = 1,
919 	},
920 	[BTTV_BOARD_PINNACLE] = {
921 		.name		= "Pinnacle PCTV Studio/Rave",
922 		.video_inputs	= 3,
923 		/* .audio_inputs= 1, */
924 		.svhs		= 2,
925 		.gpiomask	= 0x03000F,
926 		.muxsel		= MUXSEL(2, 3, 1, 1),
927 		.gpiomux	= { 2, 0xd0001, 0, 0 },
928 		.gpiomute	= 1,
929 		.pll		= PLL_28,
930 		.tuner_type	= UNSET,
931 		.tuner_addr	= ADDR_UNSET,
932 	},
933 
934 	/* ---- card 0x28 ---------------------------------- */
935 	[BTTV_BOARD_STB2] = {
936 		.name		= "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100",
937 		.video_inputs	= 3,
938 		/* .audio_inputs= 1, */
939 		.svhs		= 2,
940 		.gpiomask	= 7,
941 		.muxsel		= MUXSEL(2, 3, 1, 1),
942 		.gpiomux	= { 4, 0, 2, 3 },
943 		.gpiomute	= 1,
944 		.no_msp34xx	= 1,
945 		.tuner_type     = TUNER_PHILIPS_NTSC,
946 		.tuner_addr	= ADDR_UNSET,
947 		.pll            = PLL_28,
948 		.has_radio      = 1,
949 	},
950 	[BTTV_BOARD_AVPHONE98] = {
951 		.name		= "AVerMedia TVPhone 98",
952 		.video_inputs	= 3,
953 		/* .audio_inputs= 4, */
954 		.svhs		= 2,
955 		.gpiomask	= 15,
956 		.muxsel		= MUXSEL(2, 3, 1, 1),
957 		.gpiomux	= { 13, 4, 11, 7 },
958 		.pll		= PLL_28,
959 		.tuner_type	= UNSET,
960 		.tuner_addr	= ADDR_UNSET,
961 		.has_radio	= 1,
962 		.audio_mode_gpio= avermedia_tvphone_audio,
963 	},
964 	[BTTV_BOARD_PV951] = {
965 		.name		= "ProVideo PV951", /* pic16c54 */
966 		.video_inputs	= 3,
967 		/* .audio_inputs= 1, */
968 		.svhs		= 2,
969 		.gpiomask	= 0,
970 		.muxsel		= MUXSEL(2, 3, 1, 1),
971 		.gpiomux	= { 0, 0, 0, 0},
972 		.no_msp34xx	= 1,
973 		.pll		= PLL_28,
974 		.tuner_type	= TUNER_PHILIPS_PAL_I,
975 		.tuner_addr	= ADDR_UNSET,
976 	},
977 	[BTTV_BOARD_ONAIR_TV] = {
978 		.name		= "Little OnAir TV",
979 		.video_inputs	= 3,
980 		/* .audio_inputs= 1, */
981 		.svhs		= 2,
982 		.gpiomask	= 0xe00b,
983 		.muxsel		= MUXSEL(2, 3, 1, 1),
984 		.gpiomux	= { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 },
985 		.gpiomute	= 0xff3ffc,
986 		.no_msp34xx	= 1,
987 		.tuner_type	= UNSET,
988 		.tuner_addr	= ADDR_UNSET,
989 	},
990 
991 	/* ---- card 0x2c ---------------------------------- */
992 	[BTTV_BOARD_SIGMA_TVII_FM] = {
993 		.name		= "Sigma TVII-FM",
994 		.video_inputs	= 2,
995 		/* .audio_inputs= 1, */
996 		.svhs		= NO_SVHS,
997 		.gpiomask	= 3,
998 		.muxsel		= MUXSEL(2, 3, 1, 1),
999 		.gpiomux	= { 1, 1, 0, 2 },
1000 		.gpiomute	= 3,
1001 		.no_msp34xx	= 1,
1002 		.pll		= PLL_NONE,
1003 		.tuner_type	= UNSET,
1004 		.tuner_addr	= ADDR_UNSET,
1005 	},
1006 	[BTTV_BOARD_MATRIX_VISION2] = {
1007 		.name		= "MATRIX-Vision MV-Delta 2",
1008 		.video_inputs	= 5,
1009 		/* .audio_inputs= 1, */
1010 		.svhs		= 3,
1011 		.gpiomask	= 0,
1012 		.muxsel		= MUXSEL(2, 3, 1, 0, 0),
1013 		.gpiomux	= { 0 },
1014 		.no_msp34xx	= 1,
1015 		.pll		= PLL_28,
1016 		.tuner_type	= TUNER_ABSENT,
1017 		.tuner_addr	= ADDR_UNSET,
1018 	},
1019 	[BTTV_BOARD_ZOLTRIX_GENIE] = {
1020 		.name		= "Zoltrix Genie TV/FM",
1021 		.video_inputs	= 3,
1022 		/* .audio_inputs= 1, */
1023 		.svhs		= 2,
1024 		.gpiomask	= 0xbcf03f,
1025 		.muxsel		= MUXSEL(2, 3, 1, 1),
1026 		.gpiomux	= { 0xbc803f, 0xbc903f, 0xbcb03f, 0 },
1027 		.gpiomute	= 0xbcb03f,
1028 		.no_msp34xx	= 1,
1029 		.pll		= PLL_28,
1030 		.tuner_type	= TUNER_TEMIC_4039FR5_NTSC,
1031 		.tuner_addr	= ADDR_UNSET,
1032 	},
1033 	[BTTV_BOARD_TERRATVRADIO] = {
1034 		.name		= "Terratec TV/Radio+",
1035 		.video_inputs	= 3,
1036 		/* .audio_inputs= 1, */
1037 		.svhs		= 2,
1038 		.gpiomask	= 0x70000,
1039 		.muxsel		= MUXSEL(2, 3, 1, 1),
1040 		.gpiomux	= { 0x20000, 0x30000, 0x10000, 0 },
1041 		.gpiomute	= 0x40000,
1042 		.no_msp34xx	= 1,
1043 		.pll		= PLL_35,
1044 		.tuner_type	= TUNER_PHILIPS_PAL_I,
1045 		.tuner_addr	= ADDR_UNSET,
1046 		.has_radio	= 1,
1047 	},
1048 
1049 	/* ---- card 0x30 ---------------------------------- */
1050 	[BTTV_BOARD_DYNALINK] = {
1051 		.name		= "Askey CPH03x/ Dynalink Magic TView",
1052 		.video_inputs	= 3,
1053 		/* .audio_inputs= 1, */
1054 		.svhs		= 2,
1055 		.gpiomask	= 15,
1056 		.muxsel		= MUXSEL(2, 3, 1, 1),
1057 		.gpiomux	= {2,0,0,0 },
1058 		.gpiomute	= 1,
1059 		.pll		= PLL_28,
1060 		.tuner_type	= UNSET,
1061 		.tuner_addr	= ADDR_UNSET,
1062 	},
1063 	[BTTV_BOARD_GVBCTV3PCI] = {
1064 		.name		= "IODATA GV-BCTV3/PCI",
1065 		.video_inputs	= 3,
1066 		/* .audio_inputs= 1, */
1067 		.svhs		= 2,
1068 		.gpiomask	= 0x010f00,
1069 		.muxsel		= MUXSEL(2, 3, 0, 0),
1070 		.gpiomux	= {0x10000, 0, 0x10000, 0 },
1071 		.no_msp34xx	= 1,
1072 		.pll		= PLL_28,
1073 		.tuner_type	= TUNER_ALPS_TSHC6_NTSC,
1074 		.tuner_addr	= ADDR_UNSET,
1075 		.audio_mode_gpio= gvbctv3pci_audio,
1076 	},
1077 	[BTTV_BOARD_PXELVWPLTVPAK] = {
1078 		.name		= "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP",
1079 		.video_inputs	= 5,
1080 		/* .audio_inputs= 1, */
1081 		.svhs		= 3,
1082 		.has_dig_in	= 1,
1083 		.gpiomask	= 0xAA0000,
1084 		.muxsel		= MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
1085 		/* .digital_mode= DIGITAL_MODE_CAMERA, */
1086 		.gpiomux	= { 0x20000, 0, 0x80000, 0x80000 },
1087 		.gpiomute	= 0xa8000,
1088 		.no_msp34xx	= 1,
1089 		.pll		= PLL_28,
1090 		.tuner_type	= TUNER_PHILIPS_PAL_I,
1091 		.tuner_addr	= ADDR_UNSET,
1092 		.has_remote	= 1,
1093 		/* GPIO wiring: (different from Rev.4C !)
1094 			GPIO17: U4.A0 (first hef4052bt)
1095 			GPIO19: U4.A1
1096 			GPIO20: U5.A1 (second hef4052bt)
1097 			GPIO21: U4.nEN
1098 			GPIO22: BT832 Reset Line
1099 			GPIO23: A5,A0, U5,nEN
1100 		Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22
1101 		*/
1102 	},
1103 	[BTTV_BOARD_EAGLE] = {
1104 		.name           = "Eagle Wireless Capricorn2 (bt878A)",
1105 		.video_inputs   = 4,
1106 		/* .audio_inputs= 1, */
1107 		.svhs           = 2,
1108 		.gpiomask       = 7,
1109 		.muxsel         = MUXSEL(2, 0, 1, 1),
1110 		.gpiomux        = { 0, 1, 2, 3 },
1111 		.gpiomute	= 4,
1112 		.pll            = PLL_28,
1113 		.tuner_type     = UNSET /* TUNER_ALPS_TMDH2_NTSC */,
1114 		.tuner_addr	= ADDR_UNSET,
1115 	},
1116 
1117 	/* ---- card 0x34 ---------------------------------- */
1118 	[BTTV_BOARD_PINNACLEPRO] = {
1119 		/* David Härdeman <david@2gen.com> */
1120 		.name           = "Pinnacle PCTV Studio Pro",
1121 		.video_inputs   = 4,
1122 		/* .audio_inputs= 1, */
1123 		.svhs           = 3,
1124 		.gpiomask       = 0x03000F,
1125 		.muxsel		= MUXSEL(2, 3, 1, 1),
1126 		.gpiomux	= { 1, 0xd0001, 0, 0 },
1127 		.gpiomute	= 10,
1128 				/* sound path (5 sources):
1129 				MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable)
1130 					0= ext. Audio IN
1131 					1= from MUX2
1132 					2= Mono TV sound from Tuner
1133 					3= not connected
1134 				MUX2 (mask 0x30000):
1135 					0,2,3= from MSP34xx
1136 					1= FM stereo Radio from Tuner */
1137 		.pll            = PLL_28,
1138 		.tuner_type     = UNSET,
1139 		.tuner_addr	= ADDR_UNSET,
1140 	},
1141 	[BTTV_BOARD_TVIEW_RDS_FM] = {
1142 		/* Claas Langbehn <claas@bigfoot.com>,
1143 		Sven Grothklags <sven@upb.de> */
1144 		.name		= "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS",
1145 		.video_inputs	= 4,
1146 		/* .audio_inputs= 3, */
1147 		.svhs		= 2,
1148 		.gpiomask	= 0x1c,
1149 		.muxsel		= MUXSEL(2, 3, 1, 1),
1150 		.gpiomux	= { 0, 0, 0x10, 8 },
1151 		.gpiomute	= 4,
1152 		.pll		= PLL_28,
1153 		.tuner_type	= TUNER_PHILIPS_PAL,
1154 		.tuner_addr	= ADDR_UNSET,
1155 		.has_radio	= 1,
1156 	},
1157 	[BTTV_BOARD_LIFETEC_9415] = {
1158 		/* Tim Röstermundt <rosterm@uni-muenster.de>
1159 		in de.comp.os.unix.linux.hardware:
1160 			options bttv card=0 pll=1 radio=1 gpiomask=0x18e0
1161 			gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff
1162 			options tuner type=5 */
1163 		.name		= "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]",
1164 		.video_inputs	= 4,
1165 		/* .audio_inputs= 1, */
1166 		.svhs		= 2,
1167 		.gpiomask	= 0x18e0,
1168 		.muxsel		= MUXSEL(2, 3, 1, 1),
1169 		.gpiomux	= { 0x0000,0x0800,0x1000,0x1000 },
1170 		.gpiomute	= 0x18e0,
1171 			/* For cards with tda9820/tda9821:
1172 				0x0000: Tuner normal stereo
1173 				0x0080: Tuner A2 SAP (second audio program = Zweikanalton)
1174 				0x0880: Tuner A2 stereo */
1175 		.pll		= PLL_28,
1176 		.tuner_type	= UNSET,
1177 		.tuner_addr	= ADDR_UNSET,
1178 	},
1179 	[BTTV_BOARD_BESTBUY_EASYTV] = {
1180 		/* Miguel Angel Alvarez <maacruz@navegalia.com>
1181 		old Easy TV BT848 version (model CPH031) */
1182 		.name           = "Askey CPH031/ BESTBUY Easy TV",
1183 		.video_inputs	= 4,
1184 		/* .audio_inputs= 1, */
1185 		.svhs           = 2,
1186 		.gpiomask       = 0xF,
1187 		.muxsel         = MUXSEL(2, 3, 1, 0),
1188 		.gpiomux        = { 2, 0, 0, 0 },
1189 		.gpiomute	= 10,
1190 		.pll		= PLL_28,
1191 		.tuner_type	= TUNER_TEMIC_PAL,
1192 		.tuner_addr	= ADDR_UNSET,
1193 	},
1194 
1195 	/* ---- card 0x38 ---------------------------------- */
1196 	[BTTV_BOARD_FLYVIDEO_98FM] = {
1197 		/* Gordon Heydon <gjheydon@bigfoot.com ('98) */
1198 		.name           = "Lifeview FlyVideo 98FM LR50",
1199 		.video_inputs   = 4,
1200 		/* .audio_inputs= 3, */
1201 		.svhs           = 2,
1202 		.gpiomask       = 0x1800,
1203 		.muxsel         = MUXSEL(2, 3, 1, 1),
1204 		.gpiomux        = { 0, 0x800, 0x1000, 0x1000 },
1205 		.gpiomute	= 0x1800,
1206 		.pll            = PLL_28,
1207 		.tuner_type     = TUNER_PHILIPS_PAL,
1208 		.tuner_addr	= ADDR_UNSET,
1209 	},
1210 		/* This is the ultimate cheapo capture card
1211 		* just a BT848A on a small PCB!
1212 		* Steve Hosgood <steve@equiinet.com> */
1213 	[BTTV_BOARD_GRANDTEC] = {
1214 		.name           = "GrandTec 'Grand Video Capture' (Bt848)",
1215 		.video_inputs   = 2,
1216 		/* .audio_inputs= 0, */
1217 		.svhs           = 1,
1218 		.gpiomask       = 0,
1219 		.muxsel         = MUXSEL(3, 1),
1220 		.gpiomux        = { 0 },
1221 		.no_msp34xx     = 1,
1222 		.pll            = PLL_35,
1223 		.tuner_type     = TUNER_ABSENT,
1224 		.tuner_addr	= ADDR_UNSET,
1225 	},
1226 	[BTTV_BOARD_ASKEY_CPH060] = {
1227 		/* Daniel Herrington <daniel.herrington@home.com> */
1228 		.name           = "Askey CPH060/ Phoebe TV Master Only (No FM)",
1229 		.video_inputs   = 3,
1230 		/* .audio_inputs= 1, */
1231 		.svhs           = 2,
1232 		.gpiomask       = 0xe00,
1233 		.muxsel         = MUXSEL(2, 3, 1, 1),
1234 		.gpiomux        = { 0x400, 0x400, 0x400, 0x400 },
1235 		.gpiomute	= 0x800,
1236 		.pll            = PLL_28,
1237 		.tuner_type     = TUNER_TEMIC_4036FY5_NTSC,
1238 		.tuner_addr	= ADDR_UNSET,
1239 	},
1240 	[BTTV_BOARD_ASKEY_CPH03X] = {
1241 		/* Matti Mottus <mottus@physic.ut.ee> */
1242 		.name		= "Askey CPH03x TV Capturer",
1243 		.video_inputs	= 4,
1244 		/* .audio_inputs= 1, */
1245 		.svhs		= 2,
1246 		.gpiomask       = 0x03000F,
1247 		.muxsel		= MUXSEL(2, 3, 1, 0),
1248 		.gpiomux        = { 2, 0, 0, 0 },
1249 		.gpiomute	= 1,
1250 		.pll            = PLL_28,
1251 		.tuner_type	= TUNER_TEMIC_PAL,
1252 		.tuner_addr	= ADDR_UNSET,
1253 		.has_remote	= 1,
1254 	},
1255 
1256 	/* ---- card 0x3c ---------------------------------- */
1257 	[BTTV_BOARD_MM100PCTV] = {
1258 		/* Philip Blundell <philb@gnu.org> */
1259 		.name           = "Modular Technology MM100PCTV",
1260 		.video_inputs   = 2,
1261 		/* .audio_inputs= 2, */
1262 		.svhs		= NO_SVHS,
1263 		.gpiomask       = 11,
1264 		.muxsel         = MUXSEL(2, 3, 1, 1),
1265 		.gpiomux        = { 2, 0, 0, 1 },
1266 		.gpiomute	= 8,
1267 		.pll            = PLL_35,
1268 		.tuner_type     = TUNER_TEMIC_PAL,
1269 		.tuner_addr	= ADDR_UNSET,
1270 	},
1271 	[BTTV_BOARD_GMV1] = {
1272 		/* Adrian Cox <adrian@humboldt.co.uk */
1273 		.name		= "AG Electronics GMV1",
1274 		.video_inputs   = 2,
1275 		/* .audio_inputs= 0, */
1276 		.svhs		= 1,
1277 		.gpiomask       = 0xF,
1278 		.muxsel		= MUXSEL(2, 2),
1279 		.gpiomux        = { },
1280 		.no_msp34xx     = 1,
1281 		.pll		= PLL_28,
1282 		.tuner_type     = TUNER_ABSENT,
1283 		.tuner_addr	= ADDR_UNSET,
1284 	},
1285 	[BTTV_BOARD_BESTBUY_EASYTV2] = {
1286 		/* Miguel Angel Alvarez <maacruz@navegalia.com>
1287 		new Easy TV BT878 version (model CPH061)
1288 		special thanks to Informatica Mieres for providing the card */
1289 		.name           = "Askey CPH061/ BESTBUY Easy TV (bt878)",
1290 		.video_inputs	= 3,
1291 		/* .audio_inputs= 2, */
1292 		.svhs           = 2,
1293 		.gpiomask       = 0xFF,
1294 		.muxsel         = MUXSEL(2, 3, 1, 0),
1295 		.gpiomux        = { 1, 0, 4, 4 },
1296 		.gpiomute	= 9,
1297 		.pll		= PLL_28,
1298 		.tuner_type	= TUNER_PHILIPS_PAL,
1299 		.tuner_addr	= ADDR_UNSET,
1300 	},
1301 	[BTTV_BOARD_ATI_TVWONDER] = {
1302 		/* Lukas Gebauer <geby@volny.cz> */
1303 		.name		= "ATI TV-Wonder",
1304 		.video_inputs	= 3,
1305 		/* .audio_inputs= 1, */
1306 		.svhs		= 2,
1307 		.gpiomask	= 0xf03f,
1308 		.muxsel		= MUXSEL(2, 3, 1, 0),
1309 		.gpiomux	= { 0xbffe, 0, 0xbfff, 0 },
1310 		.gpiomute	= 0xbffe,
1311 		.pll		= PLL_28,
1312 		.tuner_type	= TUNER_TEMIC_4006FN5_MULTI_PAL,
1313 		.tuner_addr	= ADDR_UNSET,
1314 	},
1315 
1316 	/* ---- card 0x40 ---------------------------------- */
1317 	[BTTV_BOARD_ATI_TVWONDERVE] = {
1318 		/* Lukas Gebauer <geby@volny.cz> */
1319 		.name		= "ATI TV-Wonder VE",
1320 		.video_inputs	= 2,
1321 		/* .audio_inputs= 1, */
1322 		.svhs		= NO_SVHS,
1323 		.gpiomask	= 1,
1324 		.muxsel		= MUXSEL(2, 3, 0, 1),
1325 		.gpiomux	= { 0, 0, 1, 0 },
1326 		.no_msp34xx	= 1,
1327 		.pll		= PLL_28,
1328 		.tuner_type	= TUNER_TEMIC_4006FN5_MULTI_PAL,
1329 		.tuner_addr	= ADDR_UNSET,
1330 	},
1331 	[BTTV_BOARD_FLYVIDEO2000] = {
1332 		/* DeeJay <deejay@westel900.net (2000S) */
1333 		.name           = "Lifeview FlyVideo 2000S LR90",
1334 		.video_inputs   = 3,
1335 		/* .audio_inputs= 3, */
1336 		.svhs           = 2,
1337 		.gpiomask	= 0x18e0,
1338 		.muxsel		= MUXSEL(2, 3, 0, 1),
1339 				/* Radio changed from 1e80 to 0x800 to make
1340 				FlyVideo2000S in .hu happy (gm)*/
1341 				/* -dk-???: set mute=0x1800 for tda9874h daughterboard */
1342 		.gpiomux	= { 0x0000,0x0800,0x1000,0x1000 },
1343 		.gpiomute	= 0x1800,
1344 		.audio_mode_gpio= fv2000s_audio,
1345 		.no_msp34xx	= 1,
1346 		.pll            = PLL_28,
1347 		.tuner_type     = TUNER_PHILIPS_PAL,
1348 		.tuner_addr	= ADDR_UNSET,
1349 	},
1350 	[BTTV_BOARD_TERRATVALUER] = {
1351 		.name		= "Terratec TValueRadio",
1352 		.video_inputs	= 3,
1353 		/* .audio_inputs= 1, */
1354 		.svhs		= 2,
1355 		.gpiomask	= 0xffff00,
1356 		.muxsel		= MUXSEL(2, 3, 1, 1),
1357 		.gpiomux	= { 0x500, 0x500, 0x300, 0x900 },
1358 		.gpiomute	= 0x900,
1359 		.pll		= PLL_28,
1360 		.tuner_type	= TUNER_PHILIPS_PAL,
1361 		.tuner_addr	= ADDR_UNSET,
1362 		.has_radio	= 1,
1363 	},
1364 	[BTTV_BOARD_GVBCTV4PCI] = {
1365 		/* TANAKA Kei <peg00625@nifty.com> */
1366 		.name           = "IODATA GV-BCTV4/PCI",
1367 		.video_inputs   = 3,
1368 		/* .audio_inputs= 1, */
1369 		.svhs           = 2,
1370 		.gpiomask       = 0x010f00,
1371 		.muxsel         = MUXSEL(2, 3, 0, 0),
1372 		.gpiomux        = {0x10000, 0, 0x10000, 0 },
1373 		.no_msp34xx     = 1,
1374 		.pll            = PLL_28,
1375 		.tuner_type     = TUNER_SHARP_2U5JF5540_NTSC,
1376 		.tuner_addr	= ADDR_UNSET,
1377 		.audio_mode_gpio= gvbctv3pci_audio,
1378 	},
1379 
1380 	/* ---- card 0x44 ---------------------------------- */
1381 	[BTTV_BOARD_VOODOOTV_FM] = {
1382 		.name           = "3Dfx VoodooTV FM (Euro)",
1383 		/* try "insmod msp3400 simple=0" if you have
1384 		* sound problems with this card. */
1385 		.video_inputs   = 4,
1386 		/* .audio_inputs= 1, */
1387 		.svhs           = NO_SVHS,
1388 		.gpiomask       = 0x4f8a00,
1389 		/* 0x100000: 1=MSP enabled (0=disable again)
1390 		* 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1391 		.gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1392 		.gpiomute	= 0x947fff,
1393 		/* tvtuner, radio,   external,internal, mute,  stereo
1394 		* tuner, Composit, SVid, Composit-on-Svid-adapter */
1395 		.muxsel         = MUXSEL(2, 3, 0, 1),
1396 		.tuner_type     = TUNER_MT2032,
1397 		.tuner_addr	= ADDR_UNSET,
1398 		.pll		= PLL_28,
1399 		.has_radio	= 1,
1400 	},
1401 	[BTTV_BOARD_VOODOOTV_200] = {
1402 		.name           = "VoodooTV 200 (USA)",
1403 		/* try "insmod msp3400 simple=0" if you have
1404 		* sound problems with this card. */
1405 		.video_inputs   = 4,
1406 		/* .audio_inputs= 1, */
1407 		.svhs           = NO_SVHS,
1408 		.gpiomask       = 0x4f8a00,
1409 		/* 0x100000: 1=MSP enabled (0=disable again)
1410 		* 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */
1411 		.gpiomux        = {0x947fff, 0x987fff,0x947fff,0x947fff },
1412 		.gpiomute	= 0x947fff,
1413 		/* tvtuner, radio,   external,internal, mute,  stereo
1414 		* tuner, Composit, SVid, Composit-on-Svid-adapter */
1415 		.muxsel         = MUXSEL(2, 3, 0, 1),
1416 		.tuner_type     = TUNER_MT2032,
1417 		.tuner_addr	= ADDR_UNSET,
1418 		.pll		= PLL_28,
1419 		.has_radio	= 1,
1420 	},
1421 	[BTTV_BOARD_AIMMS] = {
1422 		/* Philip Blundell <pb@nexus.co.uk> */
1423 		.name           = "Active Imaging AIMMS",
1424 		.video_inputs   = 1,
1425 		/* .audio_inputs= 0, */
1426 		.tuner_type     = TUNER_ABSENT,
1427 		.tuner_addr	= ADDR_UNSET,
1428 		.pll            = PLL_28,
1429 		.muxsel         = MUXSEL(2),
1430 		.gpiomask       = 0
1431 	},
1432 	[BTTV_BOARD_PV_BT878P_PLUS] = {
1433 		/* Tomasz Pyra <hellfire@sedez.iq.pl> */
1434 		.name           = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)",
1435 		.video_inputs   = 3,
1436 		/* .audio_inputs= 4, */
1437 		.svhs           = 2,
1438 		.gpiomask       = 15,
1439 		.muxsel         = MUXSEL(2, 3, 1, 1),
1440 		.gpiomux        = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */
1441 		.gpiomute	= 13,
1442 		.pll            = PLL_28,
1443 		.tuner_type     = TUNER_LG_PAL_I_FM,
1444 		.tuner_addr	= ADDR_UNSET,
1445 		.has_remote     = 1,
1446 		/* GPIO wiring:
1447 			GPIO0: U4.A0 (hef4052bt)
1448 			GPIO1: U4.A1
1449 			GPIO2: U4.A1 (second hef4052bt)
1450 			GPIO3: U4.nEN, U5.A0, A5.nEN
1451 			GPIO8-15: vrd866b ?
1452 		*/
1453 	},
1454 	[BTTV_BOARD_FLYVIDEO98EZ] = {
1455 		.name		= "Lifeview FlyVideo 98EZ (capture only) LR51",
1456 		.video_inputs	= 4,
1457 		/* .audio_inputs= 0, */
1458 		.svhs		= 2,
1459 		/* AV1, AV2, SVHS, CVid adapter on SVHS */
1460 		.muxsel		= MUXSEL(2, 3, 1, 1),
1461 		.pll		= PLL_28,
1462 		.no_msp34xx	= 1,
1463 		.tuner_type	= TUNER_ABSENT,
1464 		.tuner_addr	= ADDR_UNSET,
1465 	},
1466 
1467 	/* ---- card 0x48 ---------------------------------- */
1468 	[BTTV_BOARD_PV_BT878P_9B] = {
1469 		/* Dariusz Kowalewski <darekk@automex.pl> */
1470 		.name		= "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)",
1471 		.video_inputs	= 4,
1472 		/* .audio_inputs= 1, */
1473 		.svhs		= 2,
1474 		.gpiomask	= 0x3f,
1475 		.muxsel		= MUXSEL(2, 3, 1, 1),
1476 		.gpiomux	= { 0x01, 0x00, 0x03, 0x03 },
1477 		.gpiomute	= 0x09,
1478 		.no_msp34xx	= 1,
1479 		.pll		= PLL_28,
1480 		.tuner_type	= TUNER_PHILIPS_PAL,
1481 		.tuner_addr	= ADDR_UNSET,
1482 		.audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */
1483 		.has_radio	= 1,  /* Note: not all cards have radio */
1484 		.has_remote     = 1,
1485 		/* GPIO wiring:
1486 			GPIO0: A0 hef4052
1487 			GPIO1: A1 hef4052
1488 			GPIO3: nEN hef4052
1489 			GPIO8-15: vrd866b
1490 			GPIO20,22,23: R30,R29,R28
1491 		*/
1492 	},
1493 	[BTTV_BOARD_SENSORAY311_611] = {
1494 		/* Clay Kunz <ckunz@mail.arc.nasa.gov> */
1495 		/* you must jumper JP5 for the 311 card (PC/104+) to work */
1496 		.name           = "Sensoray 311/611",
1497 		.video_inputs   = 5,
1498 		/* .audio_inputs= 0, */
1499 		.svhs           = 4,
1500 		.gpiomask       = 0,
1501 		.muxsel         = MUXSEL(2, 3, 1, 0, 0),
1502 		.gpiomux        = { 0 },
1503 		.tuner_type     = TUNER_ABSENT,
1504 		.tuner_addr	= ADDR_UNSET,
1505 	},
1506 	[BTTV_BOARD_RV605] = {
1507 		/* Miguel Freitas <miguel@cetuc.puc-rio.br> */
1508 		.name           = "RemoteVision MX (RV605)",
1509 		.video_inputs   = 16,
1510 		/* .audio_inputs= 0, */
1511 		.svhs           = NO_SVHS,
1512 		.gpiomask       = 0x00,
1513 		.gpiomask2      = 0x07ff,
1514 		.muxsel         = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
1515 		.no_msp34xx     = 1,
1516 		.tuner_type     = TUNER_ABSENT,
1517 		.tuner_addr	= ADDR_UNSET,
1518 		.muxsel_hook    = rv605_muxsel,
1519 	},
1520 	[BTTV_BOARD_POWERCLR_MTV878] = {
1521 		.name           = "Powercolor MTV878/ MTV878R/ MTV878F",
1522 		.video_inputs   = 3,
1523 		/* .audio_inputs= 2, */
1524 		.svhs           = 2,
1525 		.gpiomask       = 0x1C800F,  /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */
1526 		.muxsel         = MUXSEL(2, 1, 1),
1527 		.gpiomux        = { 0, 1, 2, 2 },
1528 		.gpiomute	= 4,
1529 		.tuner_type     = TUNER_PHILIPS_PAL,
1530 		.tuner_addr	= ADDR_UNSET,
1531 		.pll		= PLL_28,
1532 		.has_radio	= 1,
1533 	},
1534 
1535 	/* ---- card 0x4c ---------------------------------- */
1536 	[BTTV_BOARD_WINDVR] = {
1537 		/* Masaki Suzuki <masaki@btree.org> */
1538 		.name           = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)",
1539 		.video_inputs   = 3,
1540 		/* .audio_inputs= 1, */
1541 		.svhs           = 2,
1542 		.gpiomask       = 0x140007,
1543 		.muxsel         = MUXSEL(2, 3, 1, 1),
1544 		.gpiomux        = { 0, 1, 2, 3 },
1545 		.gpiomute	= 4,
1546 		.tuner_type     = TUNER_PHILIPS_NTSC,
1547 		.tuner_addr	= ADDR_UNSET,
1548 		.audio_mode_gpio= windvr_audio,
1549 	},
1550 	[BTTV_BOARD_GRANDTEC_MULTI] = {
1551 		.name           = "GrandTec Multi Capture Card (Bt878)",
1552 		.video_inputs   = 4,
1553 		/* .audio_inputs= 0, */
1554 		.svhs           = NO_SVHS,
1555 		.gpiomask       = 0,
1556 		.muxsel         = MUXSEL(2, 3, 1, 0),
1557 		.gpiomux        = { 0 },
1558 		.no_msp34xx     = 1,
1559 		.pll            = PLL_28,
1560 		.tuner_type     = TUNER_ABSENT,
1561 		.tuner_addr	= ADDR_UNSET,
1562 	},
1563 	[BTTV_BOARD_KWORLD] = {
1564 		.name           = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF",
1565 		.video_inputs   = 4,
1566 		/* .audio_inputs= 3, */
1567 		.svhs           = 2,
1568 		.gpiomask       = 7,
1569 		/* Tuner, SVid, SVHS, SVid to SVHS connector */
1570 		.muxsel         = MUXSEL(2, 3, 1, 1),
1571 		.gpiomux        = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio!
1572 						* This card lacks external Audio In, so we mute it on Ext. & Int.
1573 						* The PCB can take a sbx1637/sbx1673, wiring unknown.
1574 						* This card lacks PCI subsystem ID, sigh.
1575 						* gpiomux =1: lower volume, 2+3: mute
1576 						* btwincap uses 0x80000/0x80003
1577 						*/
1578 		.gpiomute	= 4,
1579 		.no_msp34xx     = 1,
1580 		.pll            = PLL_28,
1581 		.tuner_type     = TUNER_PHILIPS_PAL,
1582 		.tuner_addr	= ADDR_UNSET,
1583 		/* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and
1584 		radio signal strength indicators work fine. */
1585 		.has_radio	= 1,
1586 		/* GPIO Info:
1587 			GPIO0,1:   HEF4052 A0,A1
1588 			GPIO2:     HEF4052 nENABLE
1589 			GPIO3-7:   n.c.
1590 			GPIO8-13:  IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card]
1591 			GPIO14,15: ??
1592 			GPIO16-21: n.c.
1593 			GPIO22,23: ??
1594 			??       : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/
1595 	},
1596 	[BTTV_BOARD_DSP_TCVIDEO] = {
1597 		/* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */
1598 		.name           = "DSP Design TCVIDEO",
1599 		.video_inputs   = 4,
1600 		.svhs           = NO_SVHS,
1601 		.muxsel         = MUXSEL(2, 3, 1, 0),
1602 		.pll            = PLL_28,
1603 		.tuner_type     = UNSET,
1604 		.tuner_addr	= ADDR_UNSET,
1605 	},
1606 
1607 		/* ---- card 0x50 ---------------------------------- */
1608 	[BTTV_BOARD_HAUPPAUGEPVR] = {
1609 		.name           = "Hauppauge WinTV PVR",
1610 		.video_inputs   = 4,
1611 		/* .audio_inputs= 1, */
1612 		.svhs           = 2,
1613 		.muxsel         = MUXSEL(2, 0, 1, 1),
1614 		.pll            = PLL_28,
1615 		.tuner_type     = UNSET,
1616 		.tuner_addr	= ADDR_UNSET,
1617 
1618 		.gpiomask       = 7,
1619 		.gpiomux        = {7},
1620 	},
1621 	[BTTV_BOARD_GVBCTV5PCI] = {
1622 		.name           = "IODATA GV-BCTV5/PCI",
1623 		.video_inputs   = 3,
1624 		/* .audio_inputs= 1, */
1625 		.svhs           = 2,
1626 		.gpiomask       = 0x0f0f80,
1627 		.muxsel         = MUXSEL(2, 3, 1, 0),
1628 		.gpiomux        = {0x030000, 0x010000, 0, 0 },
1629 		.gpiomute	= 0x020000,
1630 		.no_msp34xx     = 1,
1631 		.pll            = PLL_28,
1632 		.tuner_type     = TUNER_PHILIPS_NTSC_M,
1633 		.tuner_addr	= ADDR_UNSET,
1634 		.audio_mode_gpio= gvbctv5pci_audio,
1635 		.has_radio      = 1,
1636 	},
1637 	[BTTV_BOARD_OSPREY1x0] = {
1638 		.name           = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */
1639 		.video_inputs   = 4,                  /* id-inputs-clock */
1640 		/* .audio_inputs= 0, */
1641 		.svhs           = 3,
1642 		.muxsel         = MUXSEL(3, 2, 0, 1),
1643 		.pll            = PLL_28,
1644 		.tuner_type     = TUNER_ABSENT,
1645 		.tuner_addr	= ADDR_UNSET,
1646 		.no_msp34xx     = 1,
1647 		.no_tda7432     = 1,
1648 	},
1649 	[BTTV_BOARD_OSPREY1x0_848] = {
1650 		.name           = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */
1651 		.video_inputs   = 3,
1652 		/* .audio_inputs= 0, */
1653 		.svhs           = 2,
1654 		.muxsel         = MUXSEL(2, 3, 1),
1655 		.pll            = PLL_28,
1656 		.tuner_type     = TUNER_ABSENT,
1657 		.tuner_addr	= ADDR_UNSET,
1658 		.no_msp34xx     = 1,
1659 		.no_tda7432     = 1,
1660 	},
1661 
1662 		/* ---- card 0x54 ---------------------------------- */
1663 	[BTTV_BOARD_OSPREY101_848] = {
1664 		.name           = "Osprey 101 (848)", /* 0x05-40C0-C1 */
1665 		.video_inputs   = 2,
1666 		/* .audio_inputs= 0, */
1667 		.svhs           = 1,
1668 		.muxsel         = MUXSEL(3, 1),
1669 		.pll            = PLL_28,
1670 		.tuner_type     = TUNER_ABSENT,
1671 		.tuner_addr	= ADDR_UNSET,
1672 		.no_msp34xx     = 1,
1673 		.no_tda7432     = 1,
1674 	},
1675 	[BTTV_BOARD_OSPREY1x1] = {
1676 		.name           = "Osprey 101/151",       /* 0x1(4|5)-0004-C4 */
1677 		.video_inputs   = 1,
1678 		/* .audio_inputs= 0, */
1679 		.svhs           = NO_SVHS,
1680 		.muxsel         = MUXSEL(0),
1681 		.pll            = PLL_28,
1682 		.tuner_type     = TUNER_ABSENT,
1683 		.tuner_addr	= ADDR_UNSET,
1684 		.no_msp34xx     = 1,
1685 		.no_tda7432     = 1,
1686 	},
1687 	[BTTV_BOARD_OSPREY1x1_SVID] = {
1688 		.name           = "Osprey 101/151 w/ svid",  /* 0x(16|17|20)-00C4-C1 */
1689 		.video_inputs   = 2,
1690 		/* .audio_inputs= 0, */
1691 		.svhs           = 1,
1692 		.muxsel         = MUXSEL(0, 1),
1693 		.pll            = PLL_28,
1694 		.tuner_type     = TUNER_ABSENT,
1695 		.tuner_addr	= ADDR_UNSET,
1696 		.no_msp34xx     = 1,
1697 		.no_tda7432     = 1,
1698 	},
1699 	[BTTV_BOARD_OSPREY2xx] = {
1700 		.name           = "Osprey 200/201/250/251",  /* 0x1(8|9|E|F)-0004-C4 */
1701 		.video_inputs   = 1,
1702 		/* .audio_inputs= 1, */
1703 		.svhs           = NO_SVHS,
1704 		.muxsel         = MUXSEL(0),
1705 		.pll            = PLL_28,
1706 		.tuner_type	= TUNER_ABSENT,
1707 		.tuner_addr	= ADDR_UNSET,
1708 		.no_msp34xx     = 1,
1709 		.no_tda7432     = 1,
1710 	},
1711 
1712 		/* ---- card 0x58 ---------------------------------- */
1713 	[BTTV_BOARD_OSPREY2x0_SVID] = {
1714 		.name           = "Osprey 200/250",   /* 0x1(A|B)-00C4-C1 */
1715 		.video_inputs   = 2,
1716 		/* .audio_inputs= 1, */
1717 		.svhs           = 1,
1718 		.muxsel         = MUXSEL(0, 1),
1719 		.pll            = PLL_28,
1720 		.tuner_type	= TUNER_ABSENT,
1721 		.tuner_addr	= ADDR_UNSET,
1722 		.no_msp34xx     = 1,
1723 		.no_tda7432     = 1,
1724 	},
1725 	[BTTV_BOARD_OSPREY2x0] = {
1726 		.name           = "Osprey 210/220/230",   /* 0x1(A|B)-04C0-C1 */
1727 		.video_inputs   = 2,
1728 		/* .audio_inputs= 1, */
1729 		.svhs           = 1,
1730 		.muxsel         = MUXSEL(2, 3),
1731 		.pll            = PLL_28,
1732 		.tuner_type	= TUNER_ABSENT,
1733 		.tuner_addr	= ADDR_UNSET,
1734 		.no_msp34xx     = 1,
1735 		.no_tda7432     = 1,
1736 	},
1737 	[BTTV_BOARD_OSPREY500] = {
1738 		.name           = "Osprey 500",   /* 500 */
1739 		.video_inputs   = 2,
1740 		/* .audio_inputs= 1, */
1741 		.svhs           = 1,
1742 		.muxsel         = MUXSEL(2, 3),
1743 		.pll            = PLL_28,
1744 		.tuner_type     = TUNER_ABSENT,
1745 		.tuner_addr	= ADDR_UNSET,
1746 		.no_msp34xx     = 1,
1747 		.no_tda7432     = 1,
1748 	},
1749 	[BTTV_BOARD_OSPREY540] = {
1750 		.name           = "Osprey 540",   /* 540 */
1751 		.video_inputs   = 4,
1752 		/* .audio_inputs= 1, */
1753 		.pll            = PLL_28,
1754 		.tuner_type     = TUNER_ABSENT,
1755 		.tuner_addr	= ADDR_UNSET,
1756 		.no_msp34xx     = 1,
1757 		.no_tda7432     = 1,
1758 	},
1759 
1760 		/* ---- card 0x5C ---------------------------------- */
1761 	[BTTV_BOARD_OSPREY2000] = {
1762 		.name           = "Osprey 2000",  /* 2000 */
1763 		.video_inputs   = 2,
1764 		/* .audio_inputs= 1, */
1765 		.svhs           = 1,
1766 		.muxsel         = MUXSEL(2, 3),
1767 		.pll            = PLL_28,
1768 		.tuner_type	= TUNER_ABSENT,
1769 		.tuner_addr	= ADDR_UNSET,
1770 		.no_msp34xx     = 1,
1771 		.no_tda7432     = 1,      /* must avoid, conflicts with the bt860 */
1772 	},
1773 	[BTTV_BOARD_IDS_EAGLE] = {
1774 		/* M G Berberich <berberic@forwiss.uni-passau.de> */
1775 		.name           = "IDS Eagle",
1776 		.video_inputs   = 4,
1777 		/* .audio_inputs= 0, */
1778 		.tuner_type     = TUNER_ABSENT,
1779 		.tuner_addr	= ADDR_UNSET,
1780 		.svhs           = NO_SVHS,
1781 		.gpiomask       = 0,
1782 		.muxsel         = MUXSEL(2, 2, 2, 2),
1783 		.muxsel_hook    = eagle_muxsel,
1784 		.no_msp34xx     = 1,
1785 		.pll            = PLL_28,
1786 	},
1787 	[BTTV_BOARD_PINNACLESAT] = {
1788 		.name           = "Pinnacle PCTV Sat",
1789 		.video_inputs   = 2,
1790 		/* .audio_inputs= 0, */
1791 		.svhs           = 1,
1792 		.tuner_type     = TUNER_ABSENT,
1793 		.tuner_addr	= ADDR_UNSET,
1794 		.no_msp34xx     = 1,
1795 		.no_tda7432     = 1,
1796 		.muxsel         = MUXSEL(3, 1),
1797 		.pll            = PLL_28,
1798 		.no_gpioirq     = 1,
1799 		.has_dvb        = 1,
1800 	},
1801 	[BTTV_BOARD_FORMAC_PROTV] = {
1802 		.name           = "Formac ProTV II (bt878)",
1803 		.video_inputs   = 4,
1804 		/* .audio_inputs= 1, */
1805 		.svhs           = 3,
1806 		.gpiomask       = 2,
1807 		/* TV, Comp1, Composite over SVID con, SVID */
1808 		.muxsel         = MUXSEL(2, 3, 1, 1),
1809 		.gpiomux        = { 2, 2, 0, 0 },
1810 		.pll            = PLL_28,
1811 		.has_radio      = 1,
1812 		.tuner_type     = TUNER_PHILIPS_PAL,
1813 		.tuner_addr	= ADDR_UNSET,
1814 	/* sound routing:
1815 		GPIO=0x00,0x01,0x03: mute (?)
1816 		0x02: both TV and radio (tuner: FM1216/I)
1817 		The card has onboard audio connectors labeled "cdrom" and "board",
1818 		not soldered here, though unknown wiring.
1819 		Card lacks: external audio in, pci subsystem id.
1820 	*/
1821 	},
1822 
1823 		/* ---- card 0x60 ---------------------------------- */
1824 	[BTTV_BOARD_MACHTV] = {
1825 		.name           = "MachTV",
1826 		.video_inputs   = 3,
1827 		/* .audio_inputs= 1, */
1828 		.svhs           = NO_SVHS,
1829 		.gpiomask       = 7,
1830 		.muxsel         = MUXSEL(2, 3, 1, 1),
1831 		.gpiomux        = { 0, 1, 2, 3},
1832 		.gpiomute	= 4,
1833 		.tuner_type     = TUNER_PHILIPS_PAL,
1834 		.tuner_addr	= ADDR_UNSET,
1835 		.pll            = PLL_28,
1836 	},
1837 	[BTTV_BOARD_EURESYS_PICOLO] = {
1838 		.name           = "Euresys Picolo",
1839 		.video_inputs   = 3,
1840 		/* .audio_inputs= 0, */
1841 		.svhs           = 2,
1842 		.gpiomask       = 0,
1843 		.no_msp34xx     = 1,
1844 		.no_tda7432     = 1,
1845 		.muxsel         = MUXSEL(2, 0, 1),
1846 		.pll            = PLL_28,
1847 		.tuner_type     = TUNER_ABSENT,
1848 		.tuner_addr	= ADDR_UNSET,
1849 	},
1850 	[BTTV_BOARD_PV150] = {
1851 		/* Luc Van Hoeylandt <luc@e-magic.be> */
1852 		.name           = "ProVideo PV150", /* 0x4f */
1853 		.video_inputs   = 2,
1854 		/* .audio_inputs= 0, */
1855 		.svhs           = NO_SVHS,
1856 		.gpiomask       = 0,
1857 		.muxsel         = MUXSEL(2, 3),
1858 		.gpiomux        = { 0 },
1859 		.no_msp34xx     = 1,
1860 		.pll            = PLL_28,
1861 		.tuner_type     = TUNER_ABSENT,
1862 		.tuner_addr	= ADDR_UNSET,
1863 	},
1864 	[BTTV_BOARD_AD_TVK503] = {
1865 		/* Hiroshi Takekawa <sian@big.or.jp> */
1866 		/* This card lacks subsystem ID */
1867 		.name           = "AD-TVK503", /* 0x63 */
1868 		.video_inputs   = 4,
1869 		/* .audio_inputs= 1, */
1870 		.svhs           = 2,
1871 		.gpiomask       = 0x001e8007,
1872 		.muxsel         = MUXSEL(2, 3, 1, 0),
1873 		/*                  Tuner, Radio, external, internal, off,  on */
1874 		.gpiomux        = { 0x08,  0x0f,  0x0a,     0x08 },
1875 		.gpiomute	= 0x0f,
1876 		.no_msp34xx     = 1,
1877 		.pll            = PLL_28,
1878 		.tuner_type     = TUNER_PHILIPS_NTSC,
1879 		.tuner_addr	= ADDR_UNSET,
1880 		.audio_mode_gpio= adtvk503_audio,
1881 	},
1882 
1883 		/* ---- card 0x64 ---------------------------------- */
1884 	[BTTV_BOARD_HERCULES_SM_TV] = {
1885 		.name           = "Hercules Smart TV Stereo",
1886 		.video_inputs   = 4,
1887 		/* .audio_inputs= 1, */
1888 		.svhs           = 2,
1889 		.gpiomask       = 0x00,
1890 		.muxsel         = MUXSEL(2, 3, 1, 1),
1891 		.no_msp34xx     = 1,
1892 		.pll            = PLL_28,
1893 		.tuner_type     = TUNER_PHILIPS_PAL,
1894 		.tuner_addr	= ADDR_UNSET,
1895 		/* Notes:
1896 		- card lacks subsystem ID
1897 		- stereo variant w/ daughter board with tda9874a @0xb0
1898 		- Audio Routing:
1899 			always from tda9874 independent of GPIO (?)
1900 			external line in: unknown
1901 		- Other chips: em78p156elp @ 0x96 (probably IR remote control)
1902 			hef4053 (instead 4052) for unknown function
1903 		*/
1904 	},
1905 	[BTTV_BOARD_PACETV] = {
1906 		.name           = "Pace TV & Radio Card",
1907 		.video_inputs   = 4,
1908 		/* .audio_inputs= 1, */
1909 		.svhs           = 2,
1910 		/* Tuner, CVid, SVid, CVid over SVid connector */
1911 		.muxsel         = MUXSEL(2, 3, 1, 1),
1912 		.gpiomask       = 0,
1913 		.no_tda7432     = 1,
1914 		.tuner_type     = TUNER_PHILIPS_PAL_I,
1915 		.tuner_addr	= ADDR_UNSET,
1916 		.has_radio      = 1,
1917 		.pll            = PLL_28,
1918 		/* Bt878, Bt832, FI1246 tuner; no pci subsystem id
1919 		only internal line out: (4pin header) RGGL
1920 		Radio must be decoded by msp3410d (not routed through)*/
1921 		/*
1922 		.digital_mode   = DIGITAL_MODE_CAMERA,  todo!
1923 		*/
1924 	},
1925 	[BTTV_BOARD_IVC200] = {
1926 		/* Chris Willing <chris@vislab.usyd.edu.au> */
1927 		.name           = "IVC-200",
1928 		.video_inputs   = 1,
1929 		/* .audio_inputs= 0, */
1930 		.tuner_type     = TUNER_ABSENT,
1931 		.tuner_addr	= ADDR_UNSET,
1932 		.svhs           = NO_SVHS,
1933 		.gpiomask       = 0xdf,
1934 		.muxsel         = MUXSEL(2),
1935 		.pll            = PLL_28,
1936 	},
1937 	[BTTV_BOARD_IVCE8784] = {
1938 		.name           = "IVCE-8784",
1939 		.video_inputs   = 1,
1940 		/* .audio_inputs= 0, */
1941 		.tuner_type     = TUNER_ABSENT,
1942 		.tuner_addr     = ADDR_UNSET,
1943 		.svhs           = NO_SVHS,
1944 		.gpiomask       = 0xdf,
1945 		.muxsel         = MUXSEL(2),
1946 		.pll            = PLL_28,
1947 	},
1948 	[BTTV_BOARD_XGUARD] = {
1949 		.name           = "Grand X-Guard / Trust 814PCI",
1950 		.video_inputs   = 16,
1951 		/* .audio_inputs= 0, */
1952 		.svhs           = NO_SVHS,
1953 		.tuner_type     = TUNER_ABSENT,
1954 		.tuner_addr	= ADDR_UNSET,
1955 		.gpiomask2      = 0xff,
1956 		.muxsel         = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0),
1957 		.muxsel_hook    = xguard_muxsel,
1958 		.no_msp34xx     = 1,
1959 		.no_tda7432     = 1,
1960 		.pll            = PLL_28,
1961 	},
1962 
1963 		/* ---- card 0x68 ---------------------------------- */
1964 	[BTTV_BOARD_NEBULA_DIGITV] = {
1965 		.name           = "Nebula Electronics DigiTV",
1966 		.video_inputs   = 1,
1967 		.svhs           = NO_SVHS,
1968 		.muxsel         = MUXSEL(2, 3, 1, 0),
1969 		.no_msp34xx     = 1,
1970 		.no_tda7432     = 1,
1971 		.pll            = PLL_28,
1972 		.tuner_type     = TUNER_ABSENT,
1973 		.tuner_addr	= ADDR_UNSET,
1974 		.has_dvb        = 1,
1975 		.has_remote	= 1,
1976 		.gpiomask	= 0x1b,
1977 		.no_gpioirq     = 1,
1978 	},
1979 	[BTTV_BOARD_PV143] = {
1980 		/* Jorge Boncompte - DTI2 <jorge@dti2.net> */
1981 		.name           = "ProVideo PV143",
1982 		.video_inputs   = 4,
1983 		/* .audio_inputs= 0, */
1984 		.svhs           = NO_SVHS,
1985 		.gpiomask       = 0,
1986 		.muxsel         = MUXSEL(2, 3, 1, 0),
1987 		.gpiomux        = { 0 },
1988 		.no_msp34xx     = 1,
1989 		.pll            = PLL_28,
1990 		.tuner_type     = TUNER_ABSENT,
1991 		.tuner_addr	= ADDR_UNSET,
1992 	},
1993 	[BTTV_BOARD_VD009X1_VD011_MINIDIN] = {
1994 		/* M.Klahr@phytec.de */
1995 		.name           = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)",
1996 		.video_inputs   = 4,
1997 		/* .audio_inputs= 0, */
1998 		.svhs           = 3,
1999 		.gpiomask       = 0x00,
2000 		.muxsel         = MUXSEL(2, 3, 1, 0),
2001 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2002 		.pll            = PLL_28,
2003 		.tuner_type     = TUNER_ABSENT,
2004 		.tuner_addr	= ADDR_UNSET,
2005 	},
2006 	[BTTV_BOARD_VD009X1_VD011_COMBI] = {
2007 		.name           = "PHYTEC VD-009-X1 VD-011 Combi (bt878)",
2008 		.video_inputs   = 4,
2009 		/* .audio_inputs= 0, */
2010 		.svhs           = 3,
2011 		.gpiomask       = 0x00,
2012 		.muxsel         = MUXSEL(2, 3, 1, 1),
2013 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2014 		.pll            = PLL_28,
2015 		.tuner_type     = TUNER_ABSENT,
2016 		.tuner_addr	= ADDR_UNSET,
2017 	},
2018 
2019 		/* ---- card 0x6c ---------------------------------- */
2020 	[BTTV_BOARD_VD009_MINIDIN] = {
2021 		.name           = "PHYTEC VD-009 MiniDIN (bt878)",
2022 		.video_inputs   = 10,
2023 		/* .audio_inputs= 0, */
2024 		.svhs           = 9,
2025 		.gpiomask       = 0x00,
2026 		.gpiomask2      = 0x03, /* used for external vodeo mux */
2027 		.muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0),
2028 		.muxsel_hook	= phytec_muxsel,
2029 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2030 		.pll            = PLL_28,
2031 		.tuner_type     = TUNER_ABSENT,
2032 		.tuner_addr	= ADDR_UNSET,
2033 	},
2034 	[BTTV_BOARD_VD009_COMBI] = {
2035 		.name           = "PHYTEC VD-009 Combi (bt878)",
2036 		.video_inputs   = 10,
2037 		/* .audio_inputs= 0, */
2038 		.svhs           = 9,
2039 		.gpiomask       = 0x00,
2040 		.gpiomask2      = 0x03, /* used for external vodeo mux */
2041 		.muxsel         = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1),
2042 		.muxsel_hook	= phytec_muxsel,
2043 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2044 		.pll            = PLL_28,
2045 		.tuner_type     = TUNER_ABSENT,
2046 		.tuner_addr	= ADDR_UNSET,
2047 	},
2048 	[BTTV_BOARD_IVC100] = {
2049 		.name           = "IVC-100",
2050 		.video_inputs   = 4,
2051 		/* .audio_inputs= 0, */
2052 		.tuner_type     = TUNER_ABSENT,
2053 		.tuner_addr	= ADDR_UNSET,
2054 		.svhs           = NO_SVHS,
2055 		.gpiomask       = 0xdf,
2056 		.muxsel         = MUXSEL(2, 3, 1, 0),
2057 		.pll            = PLL_28,
2058 	},
2059 	[BTTV_BOARD_IVC120] = {
2060 		/* IVC-120G - Alan Garfield <alan@fromorbit.com> */
2061 		.name           = "IVC-120G",
2062 		.video_inputs   = 16,
2063 		/* .audio_inputs= 0, */
2064 		.tuner_type     = TUNER_ABSENT,
2065 		.tuner_addr	= ADDR_UNSET,
2066 		.svhs           = NO_SVHS,   /* card has no svhs */
2067 		.no_msp34xx     = 1,
2068 		.no_tda7432     = 1,
2069 		.gpiomask       = 0x00,
2070 		.muxsel         = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0),
2071 		.muxsel_hook    = ivc120_muxsel,
2072 		.pll            = PLL_28,
2073 	},
2074 
2075 		/* ---- card 0x70 ---------------------------------- */
2076 	[BTTV_BOARD_PC_HDTV] = {
2077 		.name           = "pcHDTV HD-2000 TV",
2078 		.video_inputs   = 4,
2079 		/* .audio_inputs= 1, */
2080 		.svhs           = 2,
2081 		.muxsel         = MUXSEL(2, 3, 1, 0),
2082 		.tuner_type     = TUNER_PHILIPS_FCV1236D,
2083 		.tuner_addr	= ADDR_UNSET,
2084 		.has_dvb        = 1,
2085 	},
2086 	[BTTV_BOARD_TWINHAN_DST] = {
2087 		.name           = "Twinhan DST + clones",
2088 		.no_msp34xx     = 1,
2089 		.no_tda7432     = 1,
2090 		.tuner_type     = TUNER_ABSENT,
2091 		.tuner_addr	= ADDR_UNSET,
2092 		.no_video       = 1,
2093 		.has_dvb        = 1,
2094 	},
2095 	[BTTV_BOARD_WINFASTVC100] = {
2096 		.name           = "Winfast VC100",
2097 		.video_inputs   = 3,
2098 		/* .audio_inputs= 0, */
2099 		.svhs           = 1,
2100 		/* Vid In, SVid In, Vid over SVid in connector */
2101 		.muxsel		= MUXSEL(3, 1, 1, 3),
2102 		.no_msp34xx     = 1,
2103 		.no_tda7432     = 1,
2104 		.tuner_type     = TUNER_ABSENT,
2105 		.tuner_addr	= ADDR_UNSET,
2106 		.pll            = PLL_28,
2107 	},
2108 	[BTTV_BOARD_TEV560] = {
2109 		.name           = "Teppro TEV-560/InterVision IV-560",
2110 		.video_inputs   = 3,
2111 		/* .audio_inputs= 1, */
2112 		.svhs           = 2,
2113 		.gpiomask       = 3,
2114 		.muxsel         = MUXSEL(2, 3, 1, 1),
2115 		.gpiomux        = { 1, 1, 1, 1 },
2116 		.tuner_type     = TUNER_PHILIPS_PAL,
2117 		.tuner_addr	= ADDR_UNSET,
2118 		.pll            = PLL_35,
2119 	},
2120 
2121 		/* ---- card 0x74 ---------------------------------- */
2122 	[BTTV_BOARD_SIMUS_GVC1100] = {
2123 		.name           = "SIMUS GVC1100",
2124 		.video_inputs   = 4,
2125 		/* .audio_inputs= 0, */
2126 		.svhs           = NO_SVHS,
2127 		.tuner_type     = TUNER_ABSENT,
2128 		.tuner_addr	= ADDR_UNSET,
2129 		.pll            = PLL_28,
2130 		.muxsel         = MUXSEL(2, 2, 2, 2),
2131 		.gpiomask       = 0x3F,
2132 		.muxsel_hook    = gvc1100_muxsel,
2133 	},
2134 	[BTTV_BOARD_NGSTV_PLUS] = {
2135 		/* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */
2136 		.name           = "NGS NGSTV+",
2137 		.video_inputs   = 3,
2138 		.svhs           = 2,
2139 		.gpiomask       = 0x008007,
2140 		.muxsel         = MUXSEL(2, 3, 0, 0),
2141 		.gpiomux        = { 0, 0, 0, 0 },
2142 		.gpiomute	= 0x000003,
2143 		.pll            = PLL_28,
2144 		.tuner_type     = TUNER_PHILIPS_PAL,
2145 		.tuner_addr	= ADDR_UNSET,
2146 		.has_remote     = 1,
2147 	},
2148 	[BTTV_BOARD_LMLBT4] = {
2149 		/* http://linuxmedialabs.com */
2150 		.name           = "LMLBT4",
2151 		.video_inputs   = 4, /* IN1,IN2,IN3,IN4 */
2152 		/* .audio_inputs= 0, */
2153 		.svhs           = NO_SVHS,
2154 		.muxsel         = MUXSEL(2, 3, 1, 0),
2155 		.no_msp34xx     = 1,
2156 		.no_tda7432     = 1,
2157 		.tuner_type     = TUNER_ABSENT,
2158 		.tuner_addr	= ADDR_UNSET,
2159 	},
2160 	[BTTV_BOARD_TEKRAM_M205] = {
2161 		/* Helmroos Harri <harri.helmroos@pp.inet.fi> */
2162 		.name           = "Tekram M205 PRO",
2163 		.video_inputs   = 3,
2164 		/* .audio_inputs= 1, */
2165 		.tuner_type     = TUNER_PHILIPS_PAL,
2166 		.tuner_addr	= ADDR_UNSET,
2167 		.svhs           = 2,
2168 		.gpiomask       = 0x68,
2169 		.muxsel         = MUXSEL(2, 3, 1),
2170 		.gpiomux        = { 0x68, 0x68, 0x61, 0x61 },
2171 		.pll            = PLL_28,
2172 	},
2173 
2174 		/* ---- card 0x78 ---------------------------------- */
2175 	[BTTV_BOARD_CONTVFMI] = {
2176 		/* Javier Cendan Ares <jcendan@lycos.es> */
2177 		/* bt878 TV + FM without subsystem ID */
2178 		.name           = "Conceptronic CONTVFMi",
2179 		.video_inputs   = 3,
2180 		/* .audio_inputs= 1, */
2181 		.svhs           = 2,
2182 		.gpiomask       = 0x008007,
2183 		.muxsel         = MUXSEL(2, 3, 1, 1),
2184 		.gpiomux        = { 0, 1, 2, 2 },
2185 		.gpiomute	= 3,
2186 		.pll            = PLL_28,
2187 		.tuner_type     = TUNER_PHILIPS_PAL,
2188 		.tuner_addr	= ADDR_UNSET,
2189 		.has_remote     = 1,
2190 		.has_radio      = 1,
2191 	},
2192 	[BTTV_BOARD_PICOLO_TETRA_CHIP] = {
2193 		/*Eric DEBIEF <debief@telemsa.com>*/
2194 		/*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/
2195 		/* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/
2196 		/*0x79 in bttv.h*/
2197 		.name           = "Euresys Picolo Tetra",
2198 		.video_inputs   = 4,
2199 		/* .audio_inputs= 0, */
2200 		.svhs           = NO_SVHS,
2201 		.gpiomask       = 0,
2202 		.gpiomask2      = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/
2203 		.no_msp34xx     = 1,
2204 		.no_tda7432     = 1,
2205 		/*878A input is always MUX0, see above.*/
2206 		.muxsel         = MUXSEL(2, 2, 2, 2),
2207 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2208 		.pll            = PLL_28,
2209 		.muxsel_hook    = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/
2210 		.tuner_type     = TUNER_ABSENT,
2211 		.tuner_addr	= ADDR_UNSET,
2212 	},
2213 	[BTTV_BOARD_SPIRIT_TV] = {
2214 		/* Spirit TV Tuner from http://spiritmodems.com.au */
2215 		/* Stafford Goodsell <surge@goliath.homeunix.org> */
2216 		.name           = "Spirit TV Tuner",
2217 		.video_inputs   = 3,
2218 		/* .audio_inputs= 1, */
2219 		.svhs           = 2,
2220 		.gpiomask       = 0x0000000f,
2221 		.muxsel         = MUXSEL(2, 1, 1),
2222 		.gpiomux        = { 0x02, 0x00, 0x00, 0x00 },
2223 		.tuner_type     = TUNER_TEMIC_PAL,
2224 		.tuner_addr	= ADDR_UNSET,
2225 		.no_msp34xx     = 1,
2226 	},
2227 	[BTTV_BOARD_AVDVBT_771] = {
2228 		/* Wolfram Joost <wojo@frokaschwei.de> */
2229 		.name           = "AVerMedia AVerTV DVB-T 771",
2230 		.video_inputs   = 2,
2231 		.svhs           = 1,
2232 		.tuner_type     = TUNER_ABSENT,
2233 		.tuner_addr	= ADDR_UNSET,
2234 		.muxsel         = MUXSEL(3, 3),
2235 		.no_msp34xx     = 1,
2236 		.no_tda7432     = 1,
2237 		.pll            = PLL_28,
2238 		.has_dvb        = 1,
2239 		.no_gpioirq     = 1,
2240 		.has_remote     = 1,
2241 	},
2242 		/* ---- card 0x7c ---------------------------------- */
2243 	[BTTV_BOARD_AVDVBT_761] = {
2244 		/* Matt Jesson <dvb@jesson.eclipse.co.uk> */
2245 		/* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */
2246 		.name           = "AverMedia AverTV DVB-T 761",
2247 		.video_inputs   = 2,
2248 		.svhs           = 1,
2249 		.muxsel         = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */
2250 		.no_msp34xx     = 1,
2251 		.no_tda7432     = 1,
2252 		.pll            = PLL_28,
2253 		.tuner_type     = TUNER_ABSENT,
2254 		.tuner_addr	= ADDR_UNSET,
2255 		.has_dvb        = 1,
2256 		.no_gpioirq     = 1,
2257 		.has_remote     = 1,
2258 	},
2259 	[BTTV_BOARD_MATRIX_VISIONSQ] = {
2260 		/* andre.schwarz@matrix-vision.de */
2261 		.name		= "MATRIX Vision Sigma-SQ",
2262 		.video_inputs	= 16,
2263 		/* .audio_inputs= 0, */
2264 		.svhs		= NO_SVHS,
2265 		.gpiomask	= 0x0,
2266 		.muxsel		= MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3),
2267 		.muxsel_hook	= sigmaSQ_muxsel,
2268 		.gpiomux	= { 0 },
2269 		.no_msp34xx	= 1,
2270 		.pll		= PLL_28,
2271 		.tuner_type	= TUNER_ABSENT,
2272 		.tuner_addr	= ADDR_UNSET,
2273 	},
2274 	[BTTV_BOARD_MATRIX_VISIONSLC] = {
2275 		/* andre.schwarz@matrix-vision.de */
2276 		.name		= "MATRIX Vision Sigma-SLC",
2277 		.video_inputs	= 4,
2278 		/* .audio_inputs= 0, */
2279 		.svhs		= NO_SVHS,
2280 		.gpiomask	= 0x0,
2281 		.muxsel		= MUXSEL(2, 2, 2, 2),
2282 		.muxsel_hook	= sigmaSLC_muxsel,
2283 		.gpiomux	= { 0 },
2284 		.no_msp34xx	= 1,
2285 		.pll		= PLL_28,
2286 		.tuner_type	= TUNER_ABSENT,
2287 		.tuner_addr	= ADDR_UNSET,
2288 	},
2289 		/* BTTV_BOARD_APAC_VIEWCOMP */
2290 	[BTTV_BOARD_APAC_VIEWCOMP] = {
2291 		/* Attila Kondoros <attila.kondoros@chello.hu> */
2292 		/* bt878 TV + FM 0x00000000 subsystem ID */
2293 		.name           = "APAC Viewcomp 878(AMAX)",
2294 		.video_inputs   = 2,
2295 		/* .audio_inputs= 1, */
2296 		.svhs           = NO_SVHS,
2297 		.gpiomask       = 0xFF,
2298 		.muxsel         = MUXSEL(2, 3, 1, 1),
2299 		.gpiomux        = { 2, 0, 0, 0 },
2300 		.gpiomute	= 10,
2301 		.pll            = PLL_28,
2302 		.tuner_type     = TUNER_PHILIPS_PAL,
2303 		.tuner_addr	= ADDR_UNSET,
2304 		.has_remote     = 1,   /* miniremote works, see ir-kbd-gpio.c */
2305 		.has_radio      = 1,   /* not every card has radio */
2306 	},
2307 
2308 		/* ---- card 0x80 ---------------------------------- */
2309 	[BTTV_BOARD_DVICO_DVBT_LITE] = {
2310 		/* Chris Pascoe <c.pascoe@itee.uq.edu.au> */
2311 		.name           = "DViCO FusionHDTV DVB-T Lite",
2312 		.no_msp34xx     = 1,
2313 		.no_tda7432     = 1,
2314 		.pll            = PLL_28,
2315 		.no_video       = 1,
2316 		.has_dvb        = 1,
2317 		.tuner_type     = TUNER_ABSENT,
2318 		.tuner_addr	= ADDR_UNSET,
2319 	},
2320 	[BTTV_BOARD_VGEAR_MYVCD] = {
2321 		/* Steven <photon38@pchome.com.tw> */
2322 		.name           = "V-Gear MyVCD",
2323 		.video_inputs   = 3,
2324 		/* .audio_inputs= 1, */
2325 		.svhs           = 2,
2326 		.gpiomask       = 0x3f,
2327 		.muxsel         = MUXSEL(2, 3, 1, 0),
2328 		.gpiomux        = {0x31, 0x31, 0x31, 0x31 },
2329 		.gpiomute	= 0x31,
2330 		.no_msp34xx     = 1,
2331 		.pll            = PLL_28,
2332 		.tuner_type     = TUNER_PHILIPS_NTSC_M,
2333 		.tuner_addr	= ADDR_UNSET,
2334 		.has_radio      = 0,
2335 	},
2336 	[BTTV_BOARD_SUPER_TV] = {
2337 		/* Rick C <cryptdragoon@gmail.com> */
2338 		.name           = "Super TV Tuner",
2339 		.video_inputs   = 4,
2340 		/* .audio_inputs= 1, */
2341 		.svhs           = 2,
2342 		.muxsel         = MUXSEL(2, 3, 1, 0),
2343 		.tuner_type     = TUNER_PHILIPS_NTSC,
2344 		.tuner_addr	= ADDR_UNSET,
2345 		.gpiomask       = 0x008007,
2346 		.gpiomux        = { 0, 0x000001,0,0 },
2347 		.has_radio      = 1,
2348 	},
2349 	[BTTV_BOARD_TIBET_CS16] = {
2350 		/* Chris Fanning <video4linux@haydon.net> */
2351 		.name           = "Tibet Systems 'Progress DVR' CS16",
2352 		.video_inputs   = 16,
2353 		/* .audio_inputs= 0, */
2354 		.svhs           = NO_SVHS,
2355 		.muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2356 		.pll		= PLL_28,
2357 		.no_msp34xx     = 1,
2358 		.no_tda7432	= 1,
2359 		.tuner_type     = TUNER_ABSENT,
2360 		.tuner_addr	= ADDR_UNSET,
2361 		.muxsel_hook    = tibetCS16_muxsel,
2362 	},
2363 	[BTTV_BOARD_KODICOM_4400R] = {
2364 		/* Bill Brack <wbrack@mmm.com.hk> */
2365 		/*
2366 		* Note that, because of the card's wiring, the "master"
2367 		* BT878A chip (i.e. the one which controls the analog switch
2368 		* and must use this card type) is the 2nd one detected.  The
2369 		* other 3 chips should use card type 0x85, whose description
2370 		* follows this one.  There is a EEPROM on the card (which is
2371 		* connected to the I2C of one of those other chips), but is
2372 		* not currently handled.  There is also a facility for a
2373 		* "monitor", which is also not currently implemented.
2374 		*/
2375 		.name           = "Kodicom 4400R (master)",
2376 		.video_inputs	= 16,
2377 		/* .audio_inputs= 0, */
2378 		.tuner_type	= TUNER_ABSENT,
2379 		.tuner_addr	= ADDR_UNSET,
2380 		.svhs		= NO_SVHS,
2381 		/* GPIO bits 0-9 used for analog switch:
2382 		*   00 - 03:	camera selector
2383 		*   04 - 06:	channel (controller) selector
2384 		*   07:	data (1->on, 0->off)
2385 		*   08:	strobe
2386 		*   09:	reset
2387 		* bit 16 is input from sync separator for the channel
2388 		*/
2389 		.gpiomask	= 0x0003ff,
2390 		.no_gpioirq     = 1,
2391 		.muxsel		= MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2392 		.pll		= PLL_28,
2393 		.no_msp34xx	= 1,
2394 		.no_tda7432	= 1,
2395 		.muxsel_hook	= kodicom4400r_muxsel,
2396 	},
2397 	[BTTV_BOARD_KODICOM_4400R_SL] = {
2398 		/* Bill Brack <wbrack@mmm.com.hk> */
2399 		/* Note that, for reasons unknown, the "master" BT878A chip (i.e. the
2400 		* one which controls the analog switch, and must use the card type)
2401 		* is the 2nd one detected.  The other 3 chips should use this card
2402 		* type
2403 		*/
2404 		.name		= "Kodicom 4400R (slave)",
2405 		.video_inputs	= 16,
2406 		/* .audio_inputs= 0, */
2407 		.tuner_type	= TUNER_ABSENT,
2408 		.tuner_addr	= ADDR_UNSET,
2409 		.svhs		= NO_SVHS,
2410 		.gpiomask	= 0x010000,
2411 		.no_gpioirq     = 1,
2412 		.muxsel		= MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3),
2413 		.pll		= PLL_28,
2414 		.no_msp34xx	= 1,
2415 		.no_tda7432	= 1,
2416 		.muxsel_hook	= kodicom4400r_muxsel,
2417 	},
2418 		/* ---- card 0x86---------------------------------- */
2419 	[BTTV_BOARD_ADLINK_RTV24] = {
2420 		/* Michael Henson <mhenson@clarityvi.com> */
2421 		/* Adlink RTV24 with special unlock codes */
2422 		.name           = "Adlink RTV24",
2423 		.video_inputs   = 4,
2424 		/* .audio_inputs= 1, */
2425 		.svhs           = 2,
2426 		.muxsel         = MUXSEL(2, 3, 1, 0),
2427 		.tuner_type     = UNSET,
2428 		.tuner_addr	= ADDR_UNSET,
2429 		.pll            = PLL_28,
2430 	},
2431 		/* ---- card 0x87---------------------------------- */
2432 	[BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = {
2433 		/* Michael Krufky <mkrufky@linuxtv.org> */
2434 		.name           = "DViCO FusionHDTV 5 Lite",
2435 		.tuner_type     = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */
2436 		.tuner_addr	= ADDR_UNSET,
2437 		.video_inputs   = 3,
2438 		/* .audio_inputs= 1, */
2439 		.svhs           = 2,
2440 		.muxsel		= MUXSEL(2, 3, 1),
2441 		.gpiomask       = 0x00e00007,
2442 		.gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2443 		.gpiomute	= 0x00c00007,
2444 		.no_msp34xx     = 1,
2445 		.no_tda7432     = 1,
2446 		.has_dvb        = 1,
2447 	},
2448 		/* ---- card 0x88---------------------------------- */
2449 	[BTTV_BOARD_ACORP_Y878F] = {
2450 		/* Mauro Carvalho Chehab <mchehab@infradead.org> */
2451 		.name		= "Acorp Y878F",
2452 		.video_inputs	= 3,
2453 		/* .audio_inputs= 1, */
2454 		.svhs		= 2,
2455 		.gpiomask	= 0x01fe00,
2456 		.muxsel		= MUXSEL(2, 3, 1, 1),
2457 		.gpiomux        = { 0x001e00, 0, 0x018000, 0x014000 },
2458 		.gpiomute	= 0x002000,
2459 		.pll		= PLL_28,
2460 		.tuner_type	= TUNER_YMEC_TVF66T5_B_DFF,
2461 		.tuner_addr	= 0xc1 >>1,
2462 		.has_radio	= 1,
2463 	},
2464 		/* ---- card 0x89 ---------------------------------- */
2465 	[BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = {
2466 		.name           = "Conceptronic CTVFMi v2",
2467 		.video_inputs   = 3,
2468 		/* .audio_inputs= 1, */
2469 		.svhs           = 2,
2470 		.gpiomask       = 0x001c0007,
2471 		.muxsel         = MUXSEL(2, 3, 1, 1),
2472 		.gpiomux        = { 0, 1, 2, 2 },
2473 		.gpiomute	= 3,
2474 		.pll            = PLL_28,
2475 		.tuner_type     = TUNER_TENA_9533_DI,
2476 		.tuner_addr	= ADDR_UNSET,
2477 		.has_remote     = 1,
2478 		.has_radio      = 1,
2479 	},
2480 		/* ---- card 0x8a ---------------------------------- */
2481 	[BTTV_BOARD_PV_BT878P_2E] = {
2482 		.name		= "Prolink Pixelview PV-BT878P+ (Rev.2E)",
2483 		.video_inputs	= 5,
2484 		/* .audio_inputs= 1, */
2485 		.svhs		= 3,
2486 		.has_dig_in	= 1,
2487 		.gpiomask	= 0x01fe00,
2488 		.muxsel		= MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */
2489 		/* .digital_mode= DIGITAL_MODE_CAMERA, */
2490 		.gpiomux	= { 0x00400, 0x10400, 0x04400, 0x80000 },
2491 		.gpiomute	= 0x12400,
2492 		.no_msp34xx	= 1,
2493 		.pll		= PLL_28,
2494 		.tuner_type	= TUNER_LG_PAL_FM,
2495 		.tuner_addr	= ADDR_UNSET,
2496 		.has_remote	= 1,
2497 	},
2498 		/* ---- card 0x8b ---------------------------------- */
2499 	[BTTV_BOARD_PV_M4900] = {
2500 		/* Sérgio Fortier <sergiofortier@yahoo.com.br> */
2501 		.name           = "Prolink PixelView PlayTV MPEG2 PV-M4900",
2502 		.video_inputs   = 3,
2503 		/* .audio_inputs= 1, */
2504 		.svhs           = 2,
2505 		.gpiomask       = 0x3f,
2506 		.muxsel         = MUXSEL(2, 3, 1, 1),
2507 		.gpiomux        = { 0x21, 0x20, 0x24, 0x2c },
2508 		.gpiomute	= 0x29,
2509 		.no_msp34xx     = 1,
2510 		.pll            = PLL_28,
2511 		.tuner_type     = TUNER_YMEC_TVF_5533MF,
2512 		.tuner_addr     = ADDR_UNSET,
2513 		.has_radio      = 1,
2514 		.has_remote     = 1,
2515 	},
2516 		/* ---- card 0x8c ---------------------------------- */
2517 	/* Has four Bt878 chips behind a PCI bridge, each chip has:
2518 	     one external BNC composite input (mux 2)
2519 	     three internal composite inputs (unknown muxes)
2520 	     an 18-bit stereo A/D (CS5331A), which has:
2521 	       one external stereo unblanced (RCA) audio connection
2522 	       one (or 3?) internal stereo balanced (XLR) audio connection
2523 	       input is selected via gpio to a 14052B mux
2524 		 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300)
2525 	       gain is controlled via an X9221A chip on the I2C bus @0x28
2526 	       sample rate is controlled via gpio to an MK1413S
2527 		 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3)
2528 	     There is neither a tuner nor an svideo input. */
2529 	[BTTV_BOARD_OSPREY440]  = {
2530 		.name           = "Osprey 440",
2531 		.video_inputs   = 4,
2532 		/* .audio_inputs= 2, */
2533 		.svhs           = NO_SVHS,
2534 		.muxsel         = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */
2535 		.gpiomask	= 0x303,
2536 		.gpiomute	= 0x000, /* int + 32kHz */
2537 		.gpiomux	= { 0, 0, 0x000, 0x100},
2538 		.pll            = PLL_28,
2539 		.tuner_type     = TUNER_ABSENT,
2540 		.tuner_addr     = ADDR_UNSET,
2541 		.no_msp34xx     = 1,
2542 		.no_tda7432     = 1,
2543 	},
2544 		/* ---- card 0x8d ---------------------------------- */
2545 	[BTTV_BOARD_ASOUND_SKYEYE] = {
2546 		.name		= "Asound Skyeye PCTV",
2547 		.video_inputs	= 3,
2548 		/* .audio_inputs= 1, */
2549 		.svhs		= 2,
2550 		.gpiomask	= 15,
2551 		.muxsel		= MUXSEL(2, 3, 1, 1),
2552 		.gpiomux	= { 2, 0, 0, 0 },
2553 		.gpiomute	= 1,
2554 		.pll		= PLL_28,
2555 		.tuner_type	= TUNER_PHILIPS_NTSC,
2556 		.tuner_addr	= ADDR_UNSET,
2557 	},
2558 		/* ---- card 0x8e ---------------------------------- */
2559 	[BTTV_BOARD_SABRENT_TVFM] = {
2560 		.name		= "Sabrent TV-FM (bttv version)",
2561 		.video_inputs	= 3,
2562 		/* .audio_inputs= 1, */
2563 		.svhs		= 2,
2564 		.gpiomask	= 0x108007,
2565 		.muxsel		= MUXSEL(2, 3, 1, 1),
2566 		.gpiomux	= { 100000, 100002, 100002, 100000 },
2567 		.no_msp34xx	= 1,
2568 		.no_tda7432     = 1,
2569 		.pll		= PLL_28,
2570 		.tuner_type	= TUNER_TNF_5335MF,
2571 		.tuner_addr	= ADDR_UNSET,
2572 		.has_radio      = 1,
2573 	},
2574 	/* ---- card 0x8f ---------------------------------- */
2575 	[BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = {
2576 		.name		= "Hauppauge ImpactVCB (bt878)",
2577 		.video_inputs	= 4,
2578 		/* .audio_inputs= 0, */
2579 		.svhs		= NO_SVHS,
2580 		.gpiomask	= 0x0f, /* old: 7 */
2581 		.muxsel		= MUXSEL(0, 1, 3, 2), /* Composite 0-3 */
2582 		.no_msp34xx	= 1,
2583 		.no_tda7432     = 1,
2584 		.tuner_type	= TUNER_ABSENT,
2585 		.tuner_addr	= ADDR_UNSET,
2586 	},
2587 	[BTTV_BOARD_MACHTV_MAGICTV] = {
2588 		/* Julian Calaby <julian.calaby@gmail.com>
2589 		 * Slightly different from original MachTV definition (0x60)
2590 
2591 		 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it
2592 		 * stuffs up remote chip. Bug is a pin on the jaecs is not set
2593 		 * properly (methinks) causing no keyup bits being set */
2594 
2595 		.name           = "MagicTV", /* rebranded MachTV */
2596 		.video_inputs   = 3,
2597 		/* .audio_inputs= 1, */
2598 		.svhs           = 2,
2599 		.gpiomask       = 7,
2600 		.muxsel         = MUXSEL(2, 3, 1, 1),
2601 		.gpiomux        = { 0, 1, 2, 3 },
2602 		.gpiomute	= 4,
2603 		.tuner_type     = TUNER_TEMIC_4009FR5_PAL,
2604 		.tuner_addr     = ADDR_UNSET,
2605 		.pll            = PLL_28,
2606 		.has_radio      = 1,
2607 		.has_remote     = 1,
2608 	},
2609 	[BTTV_BOARD_SSAI_SECURITY] = {
2610 		.name		= "SSAI Security Video Interface",
2611 		.video_inputs	= 4,
2612 		/* .audio_inputs= 0, */
2613 		.svhs		= NO_SVHS,
2614 		.muxsel		= MUXSEL(0, 1, 2, 3),
2615 		.tuner_type	= TUNER_ABSENT,
2616 		.tuner_addr	= ADDR_UNSET,
2617 	},
2618 	[BTTV_BOARD_SSAI_ULTRASOUND] = {
2619 		.name		= "SSAI Ultrasound Video Interface",
2620 		.video_inputs	= 2,
2621 		/* .audio_inputs= 0, */
2622 		.svhs		= 1,
2623 		.muxsel		= MUXSEL(2, 0, 1, 3),
2624 		.tuner_type	= TUNER_ABSENT,
2625 		.tuner_addr	= ADDR_UNSET,
2626 	},
2627 	/* ---- card 0x94---------------------------------- */
2628 	[BTTV_BOARD_DVICO_FUSIONHDTV_2] = {
2629 		.name           = "DViCO FusionHDTV 2",
2630 		.tuner_type     = TUNER_PHILIPS_FCV1236D,
2631 		.tuner_addr	= ADDR_UNSET,
2632 		.video_inputs   = 3,
2633 		/* .audio_inputs= 1, */
2634 		.svhs           = 2,
2635 		.muxsel		= MUXSEL(2, 3, 1),
2636 		.gpiomask       = 0x00e00007,
2637 		.gpiomux        = { 0x00400005, 0, 0x00000001, 0 },
2638 		.gpiomute	= 0x00c00007,
2639 		.no_msp34xx     = 1,
2640 		.no_tda7432     = 1,
2641 	},
2642 	/* ---- card 0x95---------------------------------- */
2643 	[BTTV_BOARD_TYPHOON_TVTUNERPCI] = {
2644 		.name           = "Typhoon TV-Tuner PCI (50684)",
2645 		.video_inputs   = 3,
2646 		/* .audio_inputs= 1, */
2647 		.svhs           = 2,
2648 		.gpiomask       = 0x3014f,
2649 		.muxsel         = MUXSEL(2, 3, 1, 1),
2650 		.gpiomux        = { 0x20001,0x10001, 0, 0 },
2651 		.gpiomute       = 10,
2652 		.pll            = PLL_28,
2653 		.tuner_type     = TUNER_PHILIPS_PAL_I,
2654 		.tuner_addr     = ADDR_UNSET,
2655 	},
2656 	[BTTV_BOARD_GEOVISION_GV600] = {
2657 		/* emhn@usb.ve */
2658 		.name		= "Geovision GV-600",
2659 		.video_inputs	= 16,
2660 		/* .audio_inputs= 0, */
2661 		.svhs		= NO_SVHS,
2662 		.gpiomask	= 0x0,
2663 		.muxsel		= MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2664 		.muxsel_hook	= geovision_muxsel,
2665 		.gpiomux	= { 0 },
2666 		.no_msp34xx	= 1,
2667 		.pll		= PLL_28,
2668 		.tuner_type	= TUNER_ABSENT,
2669 		.tuner_addr	= ADDR_UNSET,
2670 	},
2671 	[BTTV_BOARD_KOZUMI_KTV_01C] = {
2672 		/* Mauro Lacy <mauro@lacy.com.ar>
2673 		 * Based on MagicTV and Conceptronic CONTVFMi */
2674 
2675 		.name           = "Kozumi KTV-01C",
2676 		.video_inputs   = 3,
2677 		/* .audio_inputs= 1, */
2678 		.svhs           = 2,
2679 		.gpiomask       = 0x008007,
2680 		.muxsel         = MUXSEL(2, 3, 1, 1),
2681 		.gpiomux        = { 0, 1, 2, 2 }, /* CONTVFMi */
2682 		.gpiomute	= 3, /* CONTVFMi */
2683 		.tuner_type     = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */
2684 		.tuner_addr     = ADDR_UNSET,
2685 		.pll            = PLL_28,
2686 		.has_radio      = 1,
2687 		.has_remote     = 1,
2688 	},
2689 	[BTTV_BOARD_ENLTV_FM_2] = {
2690 		/* Encore TV Tuner Pro ENL TV-FM-2
2691 		   Mauro Carvalho Chehab <mchehab@infradead.org */
2692 		.name           = "Encore ENL TV-FM-2",
2693 		.video_inputs   = 3,
2694 		/* .audio_inputs= 1, */
2695 		.svhs           = 2,
2696 		/* bit 6          -> IR disabled
2697 		   bit 18/17 = 00 -> mute
2698 			       01 -> enable external audio input
2699 			       10 -> internal audio input (mono?)
2700 			       11 -> internal audio input
2701 		 */
2702 		.gpiomask       = 0x060040,
2703 		.muxsel         = MUXSEL(2, 3, 3),
2704 		.gpiomux        = { 0x60000, 0x60000, 0x20000, 0x20000 },
2705 		.gpiomute	= 0,
2706 		.tuner_type	= TUNER_TCL_MF02GIP_5N,
2707 		.tuner_addr     = ADDR_UNSET,
2708 		.pll            = PLL_28,
2709 		.has_radio      = 1,
2710 		.has_remote     = 1,
2711 	},
2712 	[BTTV_BOARD_VD012] = {
2713 		/* D.Heer@Phytec.de */
2714 		.name           = "PHYTEC VD-012 (bt878)",
2715 		.video_inputs   = 4,
2716 		/* .audio_inputs= 0, */
2717 		.svhs           = NO_SVHS,
2718 		.gpiomask       = 0x00,
2719 		.muxsel         = MUXSEL(0, 2, 3, 1),
2720 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2721 		.pll            = PLL_28,
2722 		.tuner_type     = TUNER_ABSENT,
2723 		.tuner_addr	= ADDR_UNSET,
2724 	},
2725 	[BTTV_BOARD_VD012_X1] = {
2726 		/* D.Heer@Phytec.de */
2727 		.name           = "PHYTEC VD-012-X1 (bt878)",
2728 		.video_inputs   = 4,
2729 		/* .audio_inputs= 0, */
2730 		.svhs           = 3,
2731 		.gpiomask       = 0x00,
2732 		.muxsel         = MUXSEL(2, 3, 1),
2733 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2734 		.pll            = PLL_28,
2735 		.tuner_type     = TUNER_ABSENT,
2736 		.tuner_addr	= ADDR_UNSET,
2737 	},
2738 	[BTTV_BOARD_VD012_X2] = {
2739 		/* D.Heer@Phytec.de */
2740 		.name           = "PHYTEC VD-012-X2 (bt878)",
2741 		.video_inputs   = 4,
2742 		/* .audio_inputs= 0, */
2743 		.svhs           = 3,
2744 		.gpiomask       = 0x00,
2745 		.muxsel         = MUXSEL(3, 2, 1),
2746 		.gpiomux        = { 0, 0, 0, 0 }, /* card has no audio */
2747 		.pll            = PLL_28,
2748 		.tuner_type     = TUNER_ABSENT,
2749 		.tuner_addr	= ADDR_UNSET,
2750 	},
2751 	[BTTV_BOARD_GEOVISION_GV800S] = {
2752 		/* Bruno Christo <bchristo@inf.ufsm.br>
2753 		 *
2754 		 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2755 		 *	1 audio input  per BT878A = 4 audio inputs
2756 		 *	4 video inputs per BT878A = 16 video inputs
2757 		 * This is the first BT878A chip of the GV-800(S). It's the
2758 		 * "master" chip and it controls the video inputs through an
2759 		 * analog multiplexer (a CD22M3494) via some GPIO pins. The
2760 		 * slaves should use card type 0x9e (following this one).
2761 		 * There is a EEPROM on the card which is currently not handled.
2762 		 * The audio input is not working yet.
2763 		 */
2764 		.name           = "Geovision GV-800(S) (master)",
2765 		.video_inputs   = 4,
2766 		/* .audio_inputs= 1, */
2767 		.tuner_type	= TUNER_ABSENT,
2768 		.tuner_addr	= ADDR_UNSET,
2769 		.svhs           = NO_SVHS,
2770 		.gpiomask	= 0xf107f,
2771 		.no_gpioirq     = 1,
2772 		.muxsel		= MUXSEL(2, 2, 2, 2),
2773 		.pll		= PLL_28,
2774 		.no_msp34xx	= 1,
2775 		.no_tda7432	= 1,
2776 		.muxsel_hook    = gv800s_muxsel,
2777 	},
2778 	[BTTV_BOARD_GEOVISION_GV800S_SL] = {
2779 		/* Bruno Christo <bchristo@inf.ufsm.br>
2780 		 *
2781 		 * GeoVision GV-800(S) has 4 Conexant Fusion 878A:
2782 		 *	1 audio input  per BT878A = 4 audio inputs
2783 		 *	4 video inputs per BT878A = 16 video inputs
2784 		 * The 3 other BT878A chips are "slave" chips of the GV-800(S)
2785 		 * and should use this card type.
2786 		 * The audio input is not working yet.
2787 		 */
2788 		.name           = "Geovision GV-800(S) (slave)",
2789 		.video_inputs   = 4,
2790 		/* .audio_inputs= 1, */
2791 		.tuner_type	= TUNER_ABSENT,
2792 		.tuner_addr	= ADDR_UNSET,
2793 		.svhs           = NO_SVHS,
2794 		.gpiomask	= 0x00,
2795 		.no_gpioirq     = 1,
2796 		.muxsel		= MUXSEL(2, 2, 2, 2),
2797 		.pll		= PLL_28,
2798 		.no_msp34xx	= 1,
2799 		.no_tda7432	= 1,
2800 		.muxsel_hook    = gv800s_muxsel,
2801 	},
2802 	[BTTV_BOARD_PV183] = {
2803 		.name           = "ProVideo PV183", /* 0x9f */
2804 		.video_inputs   = 2,
2805 		/* .audio_inputs= 0, */
2806 		.svhs           = NO_SVHS,
2807 		.gpiomask       = 0,
2808 		.muxsel         = MUXSEL(2, 3),
2809 		.gpiomux        = { 0 },
2810 		.no_msp34xx     = 1,
2811 		.pll            = PLL_28,
2812 		.tuner_type     = TUNER_ABSENT,
2813 		.tuner_addr	= ADDR_UNSET,
2814 	},
2815 	/* ---- card 0xa0---------------------------------- */
2816 	[BTTV_BOARD_TVT_TD3116] = {
2817 		.name           = "Tongwei Video Technology TD-3116",
2818 		.video_inputs   = 16,
2819 		.gpiomask       = 0xc00ff,
2820 		.muxsel         = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2),
2821 		.muxsel_hook    = td3116_muxsel,
2822 		.svhs           = NO_SVHS,
2823 		.pll		= PLL_28,
2824 		.tuner_type     = TUNER_ABSENT,
2825 	},
2826 	[BTTV_BOARD_APOSONIC_WDVR] = {
2827 		.name           = "Aposonic W-DVR",
2828 		.video_inputs   = 4,
2829 		.svhs           = NO_SVHS,
2830 		.muxsel         = MUXSEL(2, 3, 1, 0),
2831 		.tuner_type     = TUNER_ABSENT,
2832 	},
2833 	[BTTV_BOARD_ADLINK_MPG24] = {
2834 		/* Adlink MPG24 */
2835 		.name           = "Adlink MPG24",
2836 		.video_inputs   = 1,
2837 		/* .audio_inputs= 1, */
2838 		.svhs           = NO_SVHS,
2839 		.muxsel         = MUXSEL(2, 2, 2, 2),
2840 		.tuner_type     = UNSET,
2841 		.tuner_addr	= ADDR_UNSET,
2842 		.pll            = PLL_28,
2843 	},
2844 	[BTTV_BOARD_BT848_CAP_14] = {
2845 		.name		= "Bt848 Capture 14MHz",
2846 		.video_inputs	= 4,
2847 		.svhs		= 2,
2848 		.muxsel		= MUXSEL(2, 3, 1, 0),
2849 		.pll		= PLL_14,
2850 		.tuner_type	= TUNER_ABSENT,
2851 	},
2852 	[BTTV_BOARD_CYBERVISION_CV06] = {
2853 		.name		= "CyberVision CV06 (SV)",
2854 		.video_inputs	= 4,
2855 		/* .audio_inputs= 0, */
2856 		.svhs		= NO_SVHS,
2857 		.muxsel		= MUXSEL(2, 3, 1, 0),
2858 		.pll		= PLL_28,
2859 		.tuner_type	= TUNER_ABSENT,
2860 		.tuner_addr	= ADDR_UNSET,
2861 	},
2862 	[BTTV_BOARD_KWORLD_VSTREAM_XPERT] = {
2863 		/* Pojar George <geoubuntu@gmail.com> */
2864 		.name           = "Kworld V-Stream Xpert TV PVR878",
2865 		.video_inputs   = 3,
2866 		/* .audio_inputs= 1, */
2867 		.svhs           = 2,
2868 		.gpiomask       = 0x001c0007,
2869 		.muxsel         = MUXSEL(2, 3, 1, 1),
2870 		.gpiomux        = { 0, 1, 2, 2 },
2871 		.gpiomute       = 3,
2872 		.pll            = PLL_28,
2873 		.tuner_type     = TUNER_TENA_9533_DI,
2874 		.tuner_addr    = ADDR_UNSET,
2875 		.has_remote     = 1,
2876 		.has_radio      = 1,
2877 	},
2878 	/* ---- card 0xa6---------------------------------- */
2879 	[BTTV_BOARD_PCI_8604PW] = {
2880 		/* PCI-8604PW with special unlock sequence */
2881 		.name           = "PCI-8604PW",
2882 		.video_inputs   = 2,
2883 		/* .audio_inputs= 0, */
2884 		.svhs           = NO_SVHS,
2885 		/* The second input is available on CN4, if populated.
2886 		 * The other 5x2 header (CN2?) connects to the same inputs
2887 		 * as the on-board BNCs */
2888 		.muxsel         = MUXSEL(2, 3),
2889 		.tuner_type     = TUNER_ABSENT,
2890 		.no_msp34xx	= 1,
2891 		.no_tda7432	= 1,
2892 		.pll            = PLL_35,
2893 	},
2894 };
2895 
2896 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards);
2897 
2898 /* ----------------------------------------------------------------------- */
2899 
2900 static unsigned char eeprom_data[256];
2901 
2902 /*
2903  * identify card
2904  */
2905 void bttv_idcard(struct bttv *btv)
2906 {
2907 	unsigned int gpiobits;
2908 	int i,type;
2909 
2910 	/* read PCI subsystem ID */
2911 	btv->cardid  = btv->c.pci->subsystem_device << 16;
2912 	btv->cardid |= btv->c.pci->subsystem_vendor;
2913 
2914 	if (0 != btv->cardid && 0xffffffff != btv->cardid) {
2915 		/* look for the card */
2916 		for (type = -1, i = 0; cards[i].id != 0; i++)
2917 			if (cards[i].id  == btv->cardid)
2918 				type = i;
2919 
2920 		if (type != -1) {
2921 			/* found it */
2922 			pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n",
2923 				btv->c.nr, cards[type].name, cards[type].cardnr,
2924 				btv->cardid & 0xffff,
2925 				(btv->cardid >> 16) & 0xffff);
2926 			btv->c.type = cards[type].cardnr;
2927 		} else {
2928 			/* 404 */
2929 			pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n",
2930 				btv->c.nr, btv->cardid & 0xffff,
2931 				(btv->cardid >> 16) & 0xffff);
2932 			pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n");
2933 		}
2934 	}
2935 
2936 	/* let the user override the autodetected type */
2937 	if (card[btv->c.nr] < bttv_num_tvcards)
2938 		btv->c.type=card[btv->c.nr];
2939 
2940 	/* print which card config we are using */
2941 	pr_info("%d: using: %s [card=%d,%s]\n",
2942 		btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type,
2943 		card[btv->c.nr] < bttv_num_tvcards
2944 		? "insmod option" : "autodetected");
2945 
2946 	/* overwrite gpio stuff ?? */
2947 	if (UNSET == audioall && UNSET == audiomux[0])
2948 		return;
2949 
2950 	if (UNSET != audiomux[0]) {
2951 		gpiobits = 0;
2952 		for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2953 			bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i];
2954 			gpiobits |= audiomux[i];
2955 		}
2956 	} else {
2957 		gpiobits = audioall;
2958 		for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2959 			bttv_tvcards[btv->c.type].gpiomux[i] = audioall;
2960 		}
2961 	}
2962 	bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits;
2963 	pr_info("%d: gpio config override: mask=0x%x, mux=",
2964 		btv->c.nr, bttv_tvcards[btv->c.type].gpiomask);
2965 	for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) {
2966 		pr_cont("%s0x%x",
2967 			i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]);
2968 	}
2969 	pr_cont("\n");
2970 }
2971 
2972 /*
2973  * (most) board specific initialisations goes here
2974  */
2975 
2976 /* Some Modular Technology cards have an eeprom, but no subsystem ID */
2977 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256])
2978 {
2979 	int type = -1;
2980 
2981 	if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13))
2982 		type = BTTV_BOARD_MODTEC_205;
2983 	else if (0 == strncmp(eeprom_data+20,"Picolo",7))
2984 		type = BTTV_BOARD_EURESYS_PICOLO;
2985 	else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0)
2986 		type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */
2987 
2988 	if (-1 != type) {
2989 		btv->c.type = type;
2990 		pr_info("%d: detected by eeprom: %s [card=%d]\n",
2991 			btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type);
2992 	}
2993 }
2994 
2995 static void flyvideo_gpio(struct bttv *btv)
2996 {
2997 	int gpio, has_remote, has_radio, is_capture_only;
2998 	int is_lr90, has_tda9820_tda9821;
2999 	int tuner_type = UNSET, ttype;
3000 
3001 	gpio_inout(0xffffff, 0);
3002 	udelay(8);  /* without this we would see the 0x1800 mask */
3003 	gpio = gpio_read();
3004 	/* FIXME: must restore OUR_EN ??? */
3005 
3006 	/* all cards provide GPIO info, some have an additional eeprom
3007 	 * LR50: GPIO coding can be found lower right CP1 .. CP9
3008 	 *       CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1.
3009 	 *       GPIO14-12: n.c.
3010 	 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878)
3011 
3012 	 * lowest 3 bytes are remote control codes (no handshake needed)
3013 	 * xxxFFF: No remote control chip soldered
3014 	 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered
3015 	 * Note: Some bits are Audio_Mask !
3016 	 */
3017 	ttype = (gpio & 0x0f0000) >> 16;
3018 	switch (ttype) {
3019 	case 0x0:
3020 		tuner_type = 2;  /* NTSC, e.g. TPI8NSR11P */
3021 		break;
3022 	case 0x2:
3023 		tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */
3024 		break;
3025 	case 0x4:
3026 		tuner_type = 5;  /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */
3027 		break;
3028 	case 0x6:
3029 		tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */
3030 		break;
3031 	case 0xC:
3032 		tuner_type = 3;  /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */
3033 		break;
3034 	default:
3035 		pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr);
3036 		break;
3037 	}
3038 
3039 	has_remote          =   gpio & 0x800000;
3040 	has_radio	    =   gpio & 0x400000;
3041 	/*   unknown                   0x200000;
3042 	 *   unknown2                  0x100000; */
3043 	is_capture_only     = !(gpio & 0x008000); /* GPIO15 */
3044 	has_tda9820_tda9821 = !(gpio & 0x004000);
3045 	is_lr90             = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */
3046 	/*
3047 	 * gpio & 0x001000    output bit for audio routing */
3048 
3049 	if (is_capture_only)
3050 		tuner_type = TUNER_ABSENT; /* No tuner present */
3051 
3052 	pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n",
3053 		btv->c.nr, has_radio ? "yes" : "no",
3054 		has_remote ? "yes" : "no", tuner_type, gpio);
3055 	pr_info("%d: FlyVideo  LR90=%s tda9821/tda9820=%s capture_only=%s\n",
3056 		btv->c.nr, is_lr90 ? "yes" : "no",
3057 		has_tda9820_tda9821 ? "yes" : "no",
3058 		is_capture_only ? "yes" : "no");
3059 
3060 	if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */
3061 		btv->tuner_type = tuner_type;
3062 	btv->has_radio = has_radio;
3063 
3064 	/* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80
3065 	 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00
3066 	 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */
3067 	if (has_tda9820_tda9821)
3068 		btv->audio_mode_gpio = lt9415_audio;
3069 	/* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */
3070 }
3071 
3072 static int miro_tunermap[] = { 0,6,2,3,   4,5,6,0,  3,0,4,5,  5,2,16,1,
3073 			       14,2,17,1, 4,1,4,3,  1,2,16,1, 4,4,4,4 };
3074 static int miro_fmtuner[]  = { 0,0,0,0,   0,0,0,0,  0,0,0,0,  0,0,0,1,
3075 			       1,1,1,1,   1,1,1,0,  0,0,0,0,  0,1,0,0 };
3076 
3077 static void miro_pinnacle_gpio(struct bttv *btv)
3078 {
3079 	int id,msp,gpio;
3080 	char *info;
3081 
3082 	gpio_inout(0xffffff, 0);
3083 	gpio = gpio_read();
3084 	id   = ((gpio>>10) & 63) -1;
3085 	msp  = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx");
3086 	if (id < 32) {
3087 		btv->tuner_type = miro_tunermap[id];
3088 		if (0 == (gpio & 0x20)) {
3089 			btv->has_radio = 1;
3090 			if (!miro_fmtuner[id]) {
3091 				btv->has_tea575x = 1;
3092 				btv->tea_gpio.wren = 6;
3093 				btv->tea_gpio.most = 7;
3094 				btv->tea_gpio.clk  = 8;
3095 				btv->tea_gpio.data = 9;
3096 				tea575x_init(btv);
3097 			}
3098 		} else {
3099 			btv->has_radio = 0;
3100 		}
3101 		if (-1 != msp) {
3102 			if (btv->c.type == BTTV_BOARD_MIRO)
3103 				btv->c.type = BTTV_BOARD_MIROPRO;
3104 			if (btv->c.type == BTTV_BOARD_PINNACLE)
3105 				btv->c.type = BTTV_BOARD_PINNACLEPRO;
3106 		}
3107 		pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n",
3108 			btv->c.nr, id+1, btv->tuner_type,
3109 			!btv->has_radio ? "no" :
3110 			(btv->has_tea575x ? "tea575x" : "fmtuner"),
3111 			(-1 == msp) ? "no" : "yes");
3112 	} else {
3113 		/* new cards with microtune tuner */
3114 		id = 63 - id;
3115 		btv->has_radio = 0;
3116 		switch (id) {
3117 		case 1:
3118 			info = "PAL / mono";
3119 			btv->tda9887_conf = TDA9887_INTERCARRIER;
3120 			break;
3121 		case 2:
3122 			info = "PAL+SECAM / stereo";
3123 			btv->has_radio = 1;
3124 			btv->tda9887_conf = TDA9887_QSS;
3125 			break;
3126 		case 3:
3127 			info = "NTSC / stereo";
3128 			btv->has_radio = 1;
3129 			btv->tda9887_conf = TDA9887_QSS;
3130 			break;
3131 		case 4:
3132 			info = "PAL+SECAM / mono";
3133 			btv->tda9887_conf = TDA9887_QSS;
3134 			break;
3135 		case 5:
3136 			info = "NTSC / mono";
3137 			btv->tda9887_conf = TDA9887_INTERCARRIER;
3138 			break;
3139 		case 6:
3140 			info = "NTSC / stereo";
3141 			btv->tda9887_conf = TDA9887_INTERCARRIER;
3142 			break;
3143 		case 7:
3144 			info = "PAL / stereo";
3145 			btv->tda9887_conf = TDA9887_INTERCARRIER;
3146 			break;
3147 		default:
3148 			info = "oops: unknown card";
3149 			break;
3150 		}
3151 		if (-1 != msp)
3152 			btv->c.type = BTTV_BOARD_PINNACLEPRO;
3153 		pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n",
3154 			btv->c.nr, id, info, btv->has_radio ? "yes" : "no");
3155 		btv->tuner_type = TUNER_MT2032;
3156 	}
3157 }
3158 
3159 /* GPIO21   L: Buffer aktiv, H: Buffer inaktiv */
3160 #define LM1882_SYNC_DRIVE     0x200000L
3161 
3162 static void init_ids_eagle(struct bttv *btv)
3163 {
3164 	gpio_inout(0xffffff,0xFFFF37);
3165 	gpio_write(0x200020);
3166 
3167 	/* flash strobe inverter ?! */
3168 	gpio_write(0x200024);
3169 
3170 	/* switch sync drive off */
3171 	gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3172 
3173 	/* set BT848 muxel to 2 */
3174 	btaor((2)<<5, ~(2<<5), BT848_IFORM);
3175 }
3176 
3177 /* Muxsel helper for the IDS Eagle.
3178  * the eagles does not use the standard muxsel-bits but
3179  * has its own multiplexer */
3180 static void eagle_muxsel(struct bttv *btv, unsigned int input)
3181 {
3182 	gpio_bits(3, input & 3);
3183 
3184 	/* composite */
3185 	/* set chroma ADC to sleep */
3186 	btor(BT848_ADC_C_SLEEP, BT848_ADC);
3187 	/* set to composite video */
3188 	btand(~BT848_CONTROL_COMP, BT848_E_CONTROL);
3189 	btand(~BT848_CONTROL_COMP, BT848_O_CONTROL);
3190 
3191 	/* switch sync drive off */
3192 	gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE);
3193 }
3194 
3195 static void gvc1100_muxsel(struct bttv *btv, unsigned int input)
3196 {
3197 	static const int masks[] = {0x30, 0x01, 0x12, 0x23};
3198 	gpio_write(masks[input%4]);
3199 }
3200 
3201 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and
3202    alarms output
3203 
3204    GPIObit    | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 |
3205    assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1|   |   |
3206 
3207    IN - sensor inputs, INx - sensor inputs and TI XORed together
3208    O1,O2,O3 - alarm outputs (relays)
3209 
3210    OUT ENABLE   1    1   0  . 1  1   0   0 . 0   0   0    0   = 0x6C0
3211 
3212 */
3213 
3214 static void init_lmlbt4x(struct bttv *btv)
3215 {
3216 	pr_debug("LMLBT4x init\n");
3217 	btwrite(0x000000, BT848_GPIO_REG_INP);
3218 	gpio_inout(0xffffff, 0x0006C0);
3219 	gpio_write(0x000000);
3220 }
3221 
3222 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input)
3223 {
3224 	unsigned int inmux = input % 8;
3225 	gpio_inout( 0xf, 0xf );
3226 	gpio_bits( 0xf, inmux );
3227 }
3228 
3229 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input)
3230 {
3231 	unsigned int inmux = input % 4;
3232 	gpio_inout( 3<<9, 3<<9 );
3233 	gpio_bits( 3<<9, inmux<<9 );
3234 }
3235 
3236 static void geovision_muxsel(struct bttv *btv, unsigned int input)
3237 {
3238 	unsigned int inmux = input % 16;
3239 	gpio_inout(0xf, 0xf);
3240 	gpio_bits(0xf, inmux);
3241 }
3242 
3243 /*
3244  * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878.
3245  * The first 74HC4051 has the lower 8 inputs, the second one the higher 8.
3246  * The muxes are controlled via a 74HC373 latch which is connected to
3247  * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch.
3248  * Q0 of the latch is connected to the Enable (~E) input of the first
3249  * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051.
3250  * Q4 - Q7 are connected to the second 74HC4051 in the same way.
3251  */
3252 
3253 static void td3116_latch_value(struct bttv *btv, u32 value)
3254 {
3255 	gpio_bits((1<<18) | 0xff, value);
3256 	gpio_bits((1<<18) | 0xff, (1<<18) | value);
3257 	udelay(1);
3258 	gpio_bits((1<<18) | 0xff, value);
3259 }
3260 
3261 static void td3116_muxsel(struct bttv *btv, unsigned int input)
3262 {
3263 	u32 value;
3264 	u32 highbit;
3265 
3266 	highbit = (input & 0x8) >> 3 ;
3267 
3268 	/* Disable outputs and set value in the mux */
3269 	value = 0x11; /* Disable outputs */
3270 	value |= ((input & 0x7) << 1)  << (4 * highbit);
3271 	td3116_latch_value(btv, value);
3272 
3273 	/* Enable the correct output */
3274 	value &= ~0x11;
3275 	value |= ((highbit ^ 0x1) << 4) | highbit;
3276 	td3116_latch_value(btv, value);
3277 }
3278 
3279 /* ----------------------------------------------------------------------- */
3280 
3281 static void bttv_reset_audio(struct bttv *btv)
3282 {
3283 	/*
3284 	 * BT878A has a audio-reset register.
3285 	 * 1. This register is an audio reset function but it is in
3286 	 *    function-0 (video capture) address space.
3287 	 * 2. It is enough to do this once per power-up of the card.
3288 	 * 3. There is a typo in the Conexant doc -- it is not at
3289 	 *    0x5B, but at 0x058. (B is an odd-number, obviously a typo!).
3290 	 * --//Shrikumar 030609
3291 	 */
3292 	if (btv->id != 878)
3293 		return;
3294 
3295 	if (bttv_debug)
3296 		pr_debug("%d: BT878A ARESET\n", btv->c.nr);
3297 	btwrite((1<<7), 0x058);
3298 	udelay(10);
3299 	btwrite(     0, 0x058);
3300 }
3301 
3302 /* initialization part one -- before registering i2c bus */
3303 void bttv_init_card1(struct bttv *btv)
3304 {
3305 	switch (btv->c.type) {
3306 	case BTTV_BOARD_HAUPPAUGE:
3307 	case BTTV_BOARD_HAUPPAUGE878:
3308 		boot_msp34xx(btv,5);
3309 		break;
3310 	case BTTV_BOARD_VOODOOTV_200:
3311 	case BTTV_BOARD_VOODOOTV_FM:
3312 		boot_msp34xx(btv,20);
3313 		break;
3314 	case BTTV_BOARD_AVERMEDIA98:
3315 		boot_msp34xx(btv,11);
3316 		break;
3317 	case BTTV_BOARD_HAUPPAUGEPVR:
3318 		pvr_boot(btv);
3319 		break;
3320 	case BTTV_BOARD_TWINHAN_DST:
3321 	case BTTV_BOARD_AVDVBT_771:
3322 	case BTTV_BOARD_PINNACLESAT:
3323 		btv->use_i2c_hw = 1;
3324 		break;
3325 	case BTTV_BOARD_ADLINK_RTV24:
3326 		init_RTV24( btv );
3327 		break;
3328 	case BTTV_BOARD_PCI_8604PW:
3329 		init_PCI8604PW(btv);
3330 		break;
3331 
3332 	}
3333 	if (!bttv_tvcards[btv->c.type].has_dvb)
3334 		bttv_reset_audio(btv);
3335 }
3336 
3337 /* initialization part two -- after registering i2c bus */
3338 void bttv_init_card2(struct bttv *btv)
3339 {
3340 	btv->tuner_type = UNSET;
3341 
3342 	if (BTTV_BOARD_UNKNOWN == btv->c.type) {
3343 		bttv_readee(btv,eeprom_data,0xa0);
3344 		identify_by_eeprom(btv,eeprom_data);
3345 	}
3346 
3347 	switch (btv->c.type) {
3348 	case BTTV_BOARD_MIRO:
3349 	case BTTV_BOARD_MIROPRO:
3350 	case BTTV_BOARD_PINNACLE:
3351 	case BTTV_BOARD_PINNACLEPRO:
3352 		/* miro/pinnacle */
3353 		miro_pinnacle_gpio(btv);
3354 		break;
3355 	case BTTV_BOARD_FLYVIDEO_98:
3356 	case BTTV_BOARD_MAXI:
3357 	case BTTV_BOARD_LIFE_FLYKIT:
3358 	case BTTV_BOARD_FLYVIDEO:
3359 	case BTTV_BOARD_TYPHOON_TVIEW:
3360 	case BTTV_BOARD_CHRONOS_VS2:
3361 	case BTTV_BOARD_FLYVIDEO_98FM:
3362 	case BTTV_BOARD_FLYVIDEO2000:
3363 	case BTTV_BOARD_FLYVIDEO98EZ:
3364 	case BTTV_BOARD_CONFERENCETV:
3365 	case BTTV_BOARD_LIFETEC_9415:
3366 		flyvideo_gpio(btv);
3367 		break;
3368 	case BTTV_BOARD_HAUPPAUGE:
3369 	case BTTV_BOARD_HAUPPAUGE878:
3370 	case BTTV_BOARD_HAUPPAUGEPVR:
3371 		/* pick up some config infos from the eeprom */
3372 		bttv_readee(btv,eeprom_data,0xa0);
3373 		hauppauge_eeprom(btv);
3374 		break;
3375 	case BTTV_BOARD_AVERMEDIA98:
3376 	case BTTV_BOARD_AVPHONE98:
3377 		bttv_readee(btv,eeprom_data,0xa0);
3378 		avermedia_eeprom(btv);
3379 		break;
3380 	case BTTV_BOARD_PXC200:
3381 		init_PXC200(btv);
3382 		break;
3383 	case BTTV_BOARD_PICOLO_TETRA_CHIP:
3384 		picolo_tetra_init(btv);
3385 		break;
3386 	case BTTV_BOARD_VHX:
3387 		btv->has_radio    = 1;
3388 		btv->has_tea575x  = 1;
3389 		btv->tea_gpio.wren = 5;
3390 		btv->tea_gpio.most = 6;
3391 		btv->tea_gpio.clk  = 3;
3392 		btv->tea_gpio.data = 4;
3393 		tea575x_init(btv);
3394 		break;
3395 	case BTTV_BOARD_VOBIS_BOOSTAR:
3396 	case BTTV_BOARD_TERRATV:
3397 		terratec_active_radio_upgrade(btv);
3398 		break;
3399 	case BTTV_BOARD_MAGICTVIEW061:
3400 		if (btv->cardid == 0x3002144f) {
3401 			btv->has_radio=1;
3402 			pr_info("%d: radio detected by subsystem id (CPH05x)\n",
3403 				btv->c.nr);
3404 		}
3405 		break;
3406 	case BTTV_BOARD_STB2:
3407 		if (btv->cardid == 0x3060121a) {
3408 			/* Fix up entry for 3DFX VoodooTV 100,
3409 			   which is an OEM STB card variant. */
3410 			btv->has_radio=0;
3411 			btv->tuner_type=TUNER_TEMIC_NTSC;
3412 		}
3413 		break;
3414 	case BTTV_BOARD_OSPREY1x0:
3415 	case BTTV_BOARD_OSPREY1x0_848:
3416 	case BTTV_BOARD_OSPREY101_848:
3417 	case BTTV_BOARD_OSPREY1x1:
3418 	case BTTV_BOARD_OSPREY1x1_SVID:
3419 	case BTTV_BOARD_OSPREY2xx:
3420 	case BTTV_BOARD_OSPREY2x0_SVID:
3421 	case BTTV_BOARD_OSPREY2x0:
3422 	case BTTV_BOARD_OSPREY440:
3423 	case BTTV_BOARD_OSPREY500:
3424 	case BTTV_BOARD_OSPREY540:
3425 	case BTTV_BOARD_OSPREY2000:
3426 		bttv_readee(btv,eeprom_data,0xa0);
3427 		osprey_eeprom(btv, eeprom_data);
3428 		break;
3429 	case BTTV_BOARD_IDS_EAGLE:
3430 		init_ids_eagle(btv);
3431 		break;
3432 	case BTTV_BOARD_MODTEC_205:
3433 		bttv_readee(btv,eeprom_data,0xa0);
3434 		modtec_eeprom(btv);
3435 		break;
3436 	case BTTV_BOARD_LMLBT4:
3437 		init_lmlbt4x(btv);
3438 		break;
3439 	case BTTV_BOARD_TIBET_CS16:
3440 		tibetCS16_init(btv);
3441 		break;
3442 	case BTTV_BOARD_KODICOM_4400R:
3443 		kodicom4400r_init(btv);
3444 		break;
3445 	case BTTV_BOARD_GEOVISION_GV800S:
3446 		gv800s_init(btv);
3447 		break;
3448 	}
3449 
3450 	/* pll configuration */
3451 	if (!(btv->id==848 && btv->revision==0x11)) {
3452 		/* defaults from card list */
3453 		if (PLL_28 == bttv_tvcards[btv->c.type].pll) {
3454 			btv->pll.pll_ifreq=28636363;
3455 			btv->pll.pll_crystal=BT848_IFORM_XT0;
3456 		}
3457 		if (PLL_35 == bttv_tvcards[btv->c.type].pll) {
3458 			btv->pll.pll_ifreq=35468950;
3459 			btv->pll.pll_crystal=BT848_IFORM_XT1;
3460 		}
3461 		if (PLL_14 == bttv_tvcards[btv->c.type].pll) {
3462 			btv->pll.pll_ifreq = 14318181;
3463 			btv->pll.pll_crystal = BT848_IFORM_XT0;
3464 		}
3465 		/* insmod options can override */
3466 		switch (pll[btv->c.nr]) {
3467 		case 0: /* none */
3468 			btv->pll.pll_crystal = 0;
3469 			btv->pll.pll_ifreq   = 0;
3470 			btv->pll.pll_ofreq   = 0;
3471 			break;
3472 		case 1: /* 28 MHz */
3473 		case 28:
3474 			btv->pll.pll_ifreq   = 28636363;
3475 			btv->pll.pll_ofreq   = 0;
3476 			btv->pll.pll_crystal = BT848_IFORM_XT0;
3477 			break;
3478 		case 2: /* 35 MHz */
3479 		case 35:
3480 			btv->pll.pll_ifreq   = 35468950;
3481 			btv->pll.pll_ofreq   = 0;
3482 			btv->pll.pll_crystal = BT848_IFORM_XT1;
3483 			break;
3484 		case 3: /* 14 MHz */
3485 		case 14:
3486 			btv->pll.pll_ifreq   = 14318181;
3487 			btv->pll.pll_ofreq   = 0;
3488 			btv->pll.pll_crystal = BT848_IFORM_XT0;
3489 			break;
3490 		}
3491 	}
3492 	btv->pll.pll_current = -1;
3493 
3494 	/* tuner configuration (from card list / autodetect / insmod option) */
3495 	if (UNSET != bttv_tvcards[btv->c.type].tuner_type)
3496 		if (UNSET == btv->tuner_type)
3497 			btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type;
3498 	if (UNSET != tuner[btv->c.nr])
3499 		btv->tuner_type = tuner[btv->c.nr];
3500 
3501 	if (btv->tuner_type == TUNER_ABSENT)
3502 		pr_info("%d: tuner absent\n", btv->c.nr);
3503 	else if (btv->tuner_type == UNSET)
3504 		pr_warn("%d: tuner type unset\n", btv->c.nr);
3505 	else
3506 		pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type);
3507 
3508 	if (autoload != UNSET) {
3509 		pr_warn("%d: the autoload option is obsolete\n", btv->c.nr);
3510 		pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n",
3511 			btv->c.nr);
3512 	}
3513 
3514 	if (UNSET == btv->tuner_type)
3515 		btv->tuner_type = TUNER_ABSENT;
3516 
3517 	btv->dig = bttv_tvcards[btv->c.type].has_dig_in ?
3518 		   bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET;
3519 	btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ?
3520 		    UNSET : bttv_tvcards[btv->c.type].svhs;
3521 	if (svhs[btv->c.nr] != UNSET)
3522 		btv->svhs = svhs[btv->c.nr];
3523 	if (remote[btv->c.nr] != UNSET)
3524 		btv->has_remote = remote[btv->c.nr];
3525 
3526 	if (bttv_tvcards[btv->c.type].has_radio)
3527 		btv->has_radio = 1;
3528 	if (bttv_tvcards[btv->c.type].has_remote)
3529 		btv->has_remote = 1;
3530 	if (!bttv_tvcards[btv->c.type].no_gpioirq)
3531 		btv->gpioirq = 1;
3532 	if (bttv_tvcards[btv->c.type].volume_gpio)
3533 		btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio;
3534 	if (bttv_tvcards[btv->c.type].audio_mode_gpio)
3535 		btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio;
3536 
3537 	if (btv->tuner_type == TUNER_ABSENT)
3538 		return;  /* no tuner or related drivers to load */
3539 
3540 	if (btv->has_saa6588 || saa6588[btv->c.nr]) {
3541 		/* Probe for RDS receiver chip */
3542 		static const unsigned short addrs[] = {
3543 			0x20 >> 1,
3544 			0x22 >> 1,
3545 			I2C_CLIENT_END
3546 		};
3547 		struct v4l2_subdev *sd;
3548 
3549 		sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3550 			&btv->c.i2c_adap, "saa6588", 0, addrs);
3551 		btv->has_saa6588 = (sd != NULL);
3552 	}
3553 
3554 	/* try to detect audio/fader chips */
3555 
3556 	/* First check if the user specified the audio chip via a module
3557 	   option. */
3558 
3559 	switch (audiodev[btv->c.nr]) {
3560 	case -1:
3561 		return;	/* do not load any audio module */
3562 
3563 	case 0: /* autodetect */
3564 		break;
3565 
3566 	case 1: {
3567 		/* The user specified that we should probe for msp3400 */
3568 		static const unsigned short addrs[] = {
3569 			I2C_ADDR_MSP3400 >> 1,
3570 			I2C_ADDR_MSP3400_ALT >> 1,
3571 			I2C_CLIENT_END
3572 		};
3573 
3574 		btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3575 			&btv->c.i2c_adap, "msp3400", 0, addrs);
3576 		if (btv->sd_msp34xx)
3577 			return;
3578 		goto no_audio;
3579 	}
3580 
3581 	case 2: {
3582 		/* The user specified that we should probe for tda7432 */
3583 		static const unsigned short addrs[] = {
3584 			I2C_ADDR_TDA7432 >> 1,
3585 			I2C_CLIENT_END
3586 		};
3587 
3588 		if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3589 				&btv->c.i2c_adap, "tda7432", 0, addrs))
3590 			return;
3591 		goto no_audio;
3592 	}
3593 
3594 	case 3: {
3595 		/* The user specified that we should probe for tvaudio */
3596 		btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3597 			&btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3598 		if (btv->sd_tvaudio)
3599 			return;
3600 		goto no_audio;
3601 	}
3602 
3603 	default:
3604 		pr_warn("%d: unknown audiodev value!\n", btv->c.nr);
3605 		return;
3606 	}
3607 
3608 	/* There were no overrides, so now we try to discover this through the
3609 	   card definition */
3610 
3611 	/* probe for msp3400 first: this driver can detect whether or not
3612 	   it really is a msp3400, so it will return NULL when the device
3613 	   found is really something else (e.g. a tea6300). */
3614 	if (!bttv_tvcards[btv->c.type].no_msp34xx) {
3615 		btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3616 			&btv->c.i2c_adap, "msp3400",
3617 			0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1));
3618 	} else if (bttv_tvcards[btv->c.type].msp34xx_alt) {
3619 		btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3620 			&btv->c.i2c_adap, "msp3400",
3621 			0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1));
3622 	}
3623 
3624 	/* If we found a msp34xx, then we're done. */
3625 	if (btv->sd_msp34xx)
3626 		return;
3627 
3628 	/* Now see if we can find one of the tvaudio devices. */
3629 	btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3630 		&btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3631 	if (btv->sd_tvaudio) {
3632 		/* There may be two tvaudio chips on the card, so try to
3633 		   find another. */
3634 		v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3635 			&btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs());
3636 	}
3637 
3638 	/* it might also be a tda7432. */
3639 	if (!bttv_tvcards[btv->c.type].no_tda7432) {
3640 		static const unsigned short addrs[] = {
3641 			I2C_ADDR_TDA7432 >> 1,
3642 			I2C_CLIENT_END
3643 		};
3644 
3645 		btv->sd_tda7432 = v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3646 				&btv->c.i2c_adap, "tda7432", 0, addrs);
3647 		if (btv->sd_tda7432)
3648 			return;
3649 	}
3650 	if (btv->sd_tvaudio)
3651 		return;
3652 
3653 no_audio:
3654 	pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr);
3655 }
3656 
3657 
3658 /* initialize the tuner */
3659 void bttv_init_tuner(struct bttv *btv)
3660 {
3661 	int addr = ADDR_UNSET;
3662 
3663 	if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr)
3664 		addr = bttv_tvcards[btv->c.type].tuner_addr;
3665 
3666 	if (btv->tuner_type != TUNER_ABSENT) {
3667 		struct tuner_setup tun_setup;
3668 
3669 		/* Load tuner module before issuing tuner config call! */
3670 		if (btv->has_radio)
3671 			v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3672 				&btv->c.i2c_adap, "tuner",
3673 				0, v4l2_i2c_tuner_addrs(ADDRS_RADIO));
3674 		v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3675 				&btv->c.i2c_adap, "tuner",
3676 				0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD));
3677 		v4l2_i2c_new_subdev(&btv->c.v4l2_dev,
3678 				&btv->c.i2c_adap, "tuner",
3679 				0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD));
3680 
3681 		tun_setup.mode_mask = T_ANALOG_TV;
3682 		tun_setup.type = btv->tuner_type;
3683 		tun_setup.addr = addr;
3684 
3685 		if (btv->has_radio)
3686 			tun_setup.mode_mask |= T_RADIO;
3687 
3688 		bttv_call_all(btv, tuner, s_type_addr, &tun_setup);
3689 	}
3690 
3691 	if (btv->tda9887_conf) {
3692 		struct v4l2_priv_tun_config tda9887_cfg;
3693 
3694 		tda9887_cfg.tuner = TUNER_TDA9887;
3695 		tda9887_cfg.priv = &btv->tda9887_conf;
3696 
3697 		bttv_call_all(btv, tuner, s_config, &tda9887_cfg);
3698 	}
3699 }
3700 
3701 /* ----------------------------------------------------------------------- */
3702 
3703 static void modtec_eeprom(struct bttv *btv)
3704 {
3705 	if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) {
3706 		btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I;
3707 		pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3708 			btv->c.nr, &eeprom_data[0x1e]);
3709 	} else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) {
3710 		btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I;
3711 		pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3712 			btv->c.nr, &eeprom_data[0x1e]);
3713 	} else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) {
3714 		btv->tuner_type=TUNER_PHILIPS_NTSC;
3715 		pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n",
3716 			btv->c.nr, &eeprom_data[0x1e]);
3717 	} else {
3718 		pr_info("%d: Modtec: Unknown TunerString: %s\n",
3719 			btv->c.nr, &eeprom_data[0x1e]);
3720 	}
3721 }
3722 
3723 static void hauppauge_eeprom(struct bttv *btv)
3724 {
3725 	struct tveeprom tv;
3726 
3727 	tveeprom_hauppauge_analog(&tv, eeprom_data);
3728 	btv->tuner_type = tv.tuner_type;
3729 	btv->has_radio  = tv.has_radio;
3730 
3731 	pr_info("%d: Hauppauge eeprom indicates model#%d\n",
3732 		btv->c.nr, tv.model);
3733 
3734 	/*
3735 	 * Some of the 878 boards have duplicate PCI IDs. Switch the board
3736 	 * type based on model #.
3737 	 */
3738 	if(tv.model == 64900) {
3739 		pr_info("%d: Switching board type from %s to %s\n",
3740 			btv->c.nr,
3741 			bttv_tvcards[btv->c.type].name,
3742 			bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name);
3743 		btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB;
3744 	}
3745 
3746 	/* The 61334 needs the msp3410 to do the radio demod to get sound */
3747 	if (tv.model == 61334)
3748 		btv->radio_uses_msp_demodulator = 1;
3749 }
3750 
3751 /* ----------------------------------------------------------------------- */
3752 
3753 static void bttv_tea575x_set_pins(struct snd_tea575x *tea, u8 pins)
3754 {
3755 	struct bttv *btv = tea->private_data;
3756 	struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3757 	u16 val = 0;
3758 
3759 	val |= (pins & TEA575X_DATA) ? (1 << gpio.data) : 0;
3760 	val |= (pins & TEA575X_CLK)  ? (1 << gpio.clk)  : 0;
3761 	val |= (pins & TEA575X_WREN) ? (1 << gpio.wren) : 0;
3762 
3763 	gpio_bits((1 << gpio.data) | (1 << gpio.clk) | (1 << gpio.wren), val);
3764 	if (btv->mbox_ior) {
3765 		/* IOW and CSEL active */
3766 		gpio_bits(btv->mbox_iow | btv->mbox_csel, 0);
3767 		udelay(5);
3768 		/* all inactive */
3769 		gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3770 			  btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3771 	}
3772 }
3773 
3774 static u8 bttv_tea575x_get_pins(struct snd_tea575x *tea)
3775 {
3776 	struct bttv *btv = tea->private_data;
3777 	struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3778 	u8 ret = 0;
3779 	u16 val;
3780 
3781 	if (btv->mbox_ior) {
3782 		/* IOR and CSEL active */
3783 		gpio_bits(btv->mbox_ior | btv->mbox_csel, 0);
3784 		udelay(5);
3785 	}
3786 	val = gpio_read();
3787 	if (btv->mbox_ior) {
3788 		/* all inactive */
3789 		gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel,
3790 			  btv->mbox_ior | btv->mbox_iow | btv->mbox_csel);
3791 	}
3792 
3793 	if (val & (1 << gpio.data))
3794 		ret |= TEA575X_DATA;
3795 	if (val & (1 << gpio.most))
3796 		ret |= TEA575X_MOST;
3797 
3798 	return ret;
3799 }
3800 
3801 static void bttv_tea575x_set_direction(struct snd_tea575x *tea, bool output)
3802 {
3803 	struct bttv *btv = tea->private_data;
3804 	struct bttv_tea575x_gpio gpio = btv->tea_gpio;
3805 	u32 mask = (1 << gpio.clk) | (1 << gpio.wren) | (1 << gpio.data) |
3806 		   (1 << gpio.most);
3807 
3808 	if (output)
3809 		gpio_inout(mask, (1 << gpio.data) | (1 << gpio.clk) |
3810 				 (1 << gpio.wren));
3811 	else
3812 		gpio_inout(mask, (1 << gpio.clk) | (1 << gpio.wren));
3813 }
3814 
3815 static const struct snd_tea575x_ops bttv_tea_ops = {
3816 	.set_pins = bttv_tea575x_set_pins,
3817 	.get_pins = bttv_tea575x_get_pins,
3818 	.set_direction = bttv_tea575x_set_direction,
3819 };
3820 
3821 static int tea575x_init(struct bttv *btv)
3822 {
3823 	btv->tea.private_data = btv;
3824 	btv->tea.ops = &bttv_tea_ops;
3825 	if (!snd_tea575x_hw_init(&btv->tea)) {
3826 		pr_info("%d: detected TEA575x radio\n", btv->c.nr);
3827 		btv->tea.mute = false;
3828 		return 0;
3829 	}
3830 
3831 	btv->has_tea575x = 0;
3832 	btv->has_radio = 0;
3833 
3834 	return -ENODEV;
3835 }
3836 
3837 /* ----------------------------------------------------------------------- */
3838 
3839 static int terratec_active_radio_upgrade(struct bttv *btv)
3840 {
3841 	btv->has_radio    = 1;
3842 	btv->has_tea575x  = 1;
3843 	btv->tea_gpio.wren = 4;
3844 	btv->tea_gpio.most = 5;
3845 	btv->tea_gpio.clk  = 3;
3846 	btv->tea_gpio.data = 2;
3847 
3848 	btv->mbox_iow     = 1 <<  8;
3849 	btv->mbox_ior     = 1 <<  9;
3850 	btv->mbox_csel    = 1 << 10;
3851 
3852 	if (!tea575x_init(btv)) {
3853 		pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr);
3854 		btv->has_saa6588 = 1;
3855 	}
3856 
3857 	return 0;
3858 }
3859 
3860 
3861 /* ----------------------------------------------------------------------- */
3862 
3863 /*
3864  * minimal bootstrap for the WinTV/PVR -- upload altera firmware.
3865  *
3866  * The hcwamc.rbf firmware file is on the Hauppauge driver CD.  Have
3867  * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be
3868  * unpacked with unzip).
3869  */
3870 #define PVR_GPIO_DELAY		10
3871 
3872 #define BTTV_ALT_DATA		0x000001
3873 #define BTTV_ALT_DCLK		0x100000
3874 #define BTTV_ALT_NCONFIG	0x800000
3875 
3876 static int pvr_altera_load(struct bttv *btv, const u8 *micro, u32 microlen)
3877 {
3878 	u32 n;
3879 	u8 bits;
3880 	int i;
3881 
3882 	gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG);
3883 	gpio_write(0);
3884 	udelay(PVR_GPIO_DELAY);
3885 
3886 	gpio_write(BTTV_ALT_NCONFIG);
3887 	udelay(PVR_GPIO_DELAY);
3888 
3889 	for (n = 0; n < microlen; n++) {
3890 		bits = micro[n];
3891 		for (i = 0 ; i < 8 ; i++) {
3892 			gpio_bits(BTTV_ALT_DCLK,0);
3893 			if (bits & 0x01)
3894 				gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA);
3895 			else
3896 				gpio_bits(BTTV_ALT_DATA,0);
3897 			gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3898 			bits >>= 1;
3899 		}
3900 	}
3901 	gpio_bits(BTTV_ALT_DCLK,0);
3902 	udelay(PVR_GPIO_DELAY);
3903 
3904 	/* begin Altera init loop (Not necessary,but doesn't hurt) */
3905 	for (i = 0 ; i < 30 ; i++) {
3906 		gpio_bits(BTTV_ALT_DCLK,0);
3907 		gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK);
3908 	}
3909 	gpio_bits(BTTV_ALT_DCLK,0);
3910 	return 0;
3911 }
3912 
3913 static int pvr_boot(struct bttv *btv)
3914 {
3915 	const struct firmware *fw_entry;
3916 	int rc;
3917 
3918 	rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev);
3919 	if (rc != 0) {
3920 		pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr);
3921 		return rc;
3922 	}
3923 	rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size);
3924 	pr_info("%d: altera firmware upload %s\n",
3925 		btv->c.nr, (rc < 0) ? "failed" : "ok");
3926 	release_firmware(fw_entry);
3927 	return rc;
3928 }
3929 
3930 /* ----------------------------------------------------------------------- */
3931 /* some osprey specific stuff                                              */
3932 
3933 static void osprey_eeprom(struct bttv *btv, const u8 ee[256])
3934 {
3935 	int i;
3936 	u32 serial = 0;
3937 	int cardid = -1;
3938 
3939 	/* This code will nevery actually get called in this case.... */
3940 	if (btv->c.type == BTTV_BOARD_UNKNOWN) {
3941 		/* this might be an antique... check for MMAC label in eeprom */
3942 		if (!strncmp(ee, "MMAC", 4)) {
3943 			u8 checksum = 0;
3944 			for (i = 0; i < 21; i++)
3945 				checksum += ee[i];
3946 			if (checksum != ee[21])
3947 				return;
3948 			cardid = BTTV_BOARD_OSPREY1x0_848;
3949 			for (i = 12; i < 21; i++)
3950 				serial *= 10, serial += ee[i] - '0';
3951 		}
3952 	} else {
3953 		unsigned short type;
3954 
3955 		for (i = 4 * 16; i < 8 * 16; i += 16) {
3956 			u16 checksum = (__force u16)ip_compute_csum(ee + i, 16);
3957 
3958 			if ((checksum & 0xff) + (checksum >> 8) == 0xff)
3959 				break;
3960 		}
3961 		if (i >= 8*16)
3962 			return;
3963 		ee += i;
3964 
3965 		/* found a valid descriptor */
3966 		type = get_unaligned_be16((__be16 *)(ee+4));
3967 
3968 		switch(type) {
3969 		/* 848 based */
3970 		case 0x0004:
3971 			cardid = BTTV_BOARD_OSPREY1x0_848;
3972 			break;
3973 		case 0x0005:
3974 			cardid = BTTV_BOARD_OSPREY101_848;
3975 			break;
3976 
3977 		/* 878 based */
3978 		case 0x0012:
3979 		case 0x0013:
3980 			cardid = BTTV_BOARD_OSPREY1x0;
3981 			break;
3982 		case 0x0014:
3983 		case 0x0015:
3984 			cardid = BTTV_BOARD_OSPREY1x1;
3985 			break;
3986 		case 0x0016:
3987 		case 0x0017:
3988 		case 0x0020:
3989 			cardid = BTTV_BOARD_OSPREY1x1_SVID;
3990 			break;
3991 		case 0x0018:
3992 		case 0x0019:
3993 		case 0x001E:
3994 		case 0x001F:
3995 			cardid = BTTV_BOARD_OSPREY2xx;
3996 			break;
3997 		case 0x001A:
3998 		case 0x001B:
3999 			cardid = BTTV_BOARD_OSPREY2x0_SVID;
4000 			break;
4001 		case 0x0040:
4002 			cardid = BTTV_BOARD_OSPREY500;
4003 			break;
4004 		case 0x0050:
4005 		case 0x0056:
4006 			cardid = BTTV_BOARD_OSPREY540;
4007 			/* bttv_osprey_540_init(btv); */
4008 			break;
4009 		case 0x0060:
4010 		case 0x0070:
4011 		case 0x00A0:
4012 			cardid = BTTV_BOARD_OSPREY2x0;
4013 			/* enable output on select control lines */
4014 			gpio_inout(0xffffff,0x000303);
4015 			break;
4016 		case 0x00D8:
4017 			cardid = BTTV_BOARD_OSPREY440;
4018 			break;
4019 		default:
4020 			/* unknown...leave generic, but get serial # */
4021 			pr_info("%d: osprey eeprom: unknown card type 0x%04x\n",
4022 				btv->c.nr, type);
4023 			break;
4024 		}
4025 		serial = get_unaligned_be32((__be32 *)(ee+6));
4026 	}
4027 
4028 	pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n",
4029 		btv->c.nr, cardid,
4030 		cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial);
4031 
4032 	if (cardid<0 || btv->c.type == cardid)
4033 		return;
4034 
4035 	/* card type isn't set correctly */
4036 	if (card[btv->c.nr] < bttv_num_tvcards) {
4037 		pr_warn("%d: osprey eeprom: Not overriding user specified card type\n",
4038 			btv->c.nr);
4039 	} else {
4040 		pr_info("%d: osprey eeprom: Changing card type from %d to %d\n",
4041 			btv->c.nr, btv->c.type, cardid);
4042 		btv->c.type = cardid;
4043 	}
4044 }
4045 
4046 /* ----------------------------------------------------------------------- */
4047 /* AVermedia specific stuff, from  bktr_card.c                             */
4048 
4049 static int tuner_0_table[] = {
4050 	TUNER_PHILIPS_NTSC,  TUNER_PHILIPS_PAL /* PAL-BG*/,
4051 	TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL /* PAL-I*/,
4052 	TUNER_PHILIPS_PAL,   TUNER_PHILIPS_PAL,
4053 	TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM,
4054 	TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL,
4055 	TUNER_PHILIPS_FM1216ME_MK3 };
4056 
4057 static int tuner_1_table[] = {
4058 	TUNER_TEMIC_NTSC,  TUNER_TEMIC_PAL,
4059 	TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
4060 	TUNER_TEMIC_PAL,   TUNER_TEMIC_PAL,
4061 	TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */
4062 	TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL};
4063 
4064 static void avermedia_eeprom(struct bttv *btv)
4065 {
4066 	int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0;
4067 
4068 	tuner_make      = (eeprom_data[0x41] & 0x7);
4069 	tuner_tv_fm     = (eeprom_data[0x41] & 0x18) >> 3;
4070 	tuner_format    = (eeprom_data[0x42] & 0xf0) >> 4;
4071 	btv->has_remote = (eeprom_data[0x42] & 0x01);
4072 
4073 	if (tuner_make == 0 || tuner_make == 2)
4074 		if (tuner_format <= 0x0a)
4075 			tuner_type = tuner_0_table[tuner_format];
4076 	if (tuner_make == 1)
4077 		if (tuner_format <= 9)
4078 			tuner_type = tuner_1_table[tuner_format];
4079 
4080 	if (tuner_make == 4)
4081 		if (tuner_format == 0x09)
4082 			tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */
4083 
4084 	pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=",
4085 		btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]);
4086 	if (tuner_type) {
4087 		btv->tuner_type = tuner_type;
4088 		pr_cont("%d", tuner_type);
4089 	} else
4090 		pr_cont("Unknown type");
4091 	pr_cont(" radio:%s remote control:%s\n",
4092 	       tuner_tv_fm     ? "yes" : "no",
4093 	       btv->has_remote ? "yes" : "no");
4094 }
4095 
4096 /*
4097  * For Voodoo TV/FM and Voodoo 200.  These cards' tuners use a TDA9880
4098  * analog demod, which is not I2C controlled like the newer and more common
4099  * TDA9887 series.  Instead is has two tri-state input pins, S0 and S1,
4100  * that control the IF for the video and audio.  Apparently, bttv GPIO
4101  * 0x10000 is connected to S0.  S0 low selects a 38.9 MHz VIF for B/G/D/K/I
4102  * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC).
4103  */
4104 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits)
4105 {
4106 
4107 	if (btv->audio_input == TVAUDIO_INPUT_TUNER) {
4108 		if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN)
4109 			gpiobits |= 0x10000;
4110 		else
4111 			gpiobits &= ~0x10000;
4112 	}
4113 
4114 	gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits);
4115 	return gpiobits;
4116 }
4117 
4118 
4119 /*
4120  * reset/enable the MSP on some Hauppauge cards
4121  * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)!
4122  *
4123  * Hauppauge:  pin  5
4124  * Voodoo:     pin 20
4125  */
4126 static void boot_msp34xx(struct bttv *btv, int pin)
4127 {
4128 	int mask = (1 << pin);
4129 
4130 	gpio_inout(mask,mask);
4131 	gpio_bits(mask,0);
4132 	mdelay(2);
4133 	udelay(500);
4134 	gpio_bits(mask,mask);
4135 
4136 	if (bttv_gpio)
4137 		bttv_gpio_tracking(btv,"msp34xx");
4138 	if (bttv_verbose)
4139 		pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n",
4140 			btv->c.nr, pin);
4141 }
4142 
4143 /* ----------------------------------------------------------------------- */
4144 /*  Imagenation L-Model PXC200 Framegrabber */
4145 /*  This is basically the same procedure as
4146  *  used by Alessandro Rubini in his pxc200
4147  *  driver, but using BTTV functions */
4148 
4149 static void init_PXC200(struct bttv *btv)
4150 {
4151 	static int vals[] = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02,
4152 			      0x03, 0x04, 0x05, 0x06, 0x00 };
4153 	unsigned int i;
4154 	int tmp;
4155 	u32 val;
4156 
4157 	/* Initialise GPIO-connevted stuff */
4158 	gpio_inout(0xffffff, (1<<13));
4159 	gpio_write(0);
4160 	udelay(3);
4161 	gpio_write(1<<13);
4162 	/* GPIO inputs are pulled up, so no need to drive
4163 	 * reset pin any longer */
4164 	gpio_bits(0xffffff, 0);
4165 	if (bttv_gpio)
4166 		bttv_gpio_tracking(btv,"pxc200");
4167 
4168 	/*  we could/should try and reset/control the AD pots? but
4169 	    right now  we simply  turned off the crushing.  Without
4170 	    this the AGC drifts drifts
4171 	    remember the EN is reverse logic -->
4172 	    setting BT848_ADC_AGC_EN disable the AGC
4173 	    tboult@eecs.lehigh.edu
4174 	*/
4175 
4176 	btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC);
4177 
4178 	/*	Initialise MAX517 DAC */
4179 	pr_info("Setting DAC reference voltage level ...\n");
4180 	bttv_I2CWrite(btv,0x5E,0,0x80,1);
4181 
4182 	/*	Initialise 12C508 PIC */
4183 	/*	The I2CWrite and I2CRead commmands are actually to the
4184 	 *	same chips - but the R/W bit is included in the address
4185 	 *	argument so the numbers are different */
4186 
4187 
4188 	pr_info("Initialising 12C508 PIC chip ...\n");
4189 
4190 	/* First of all, enable the clock line. This is used in the PXC200-F */
4191 	val = btread(BT848_GPIO_DMA_CTL);
4192 	val |= BT848_GPIO_DMA_CTL_GPCLKMODE;
4193 	btwrite(val, BT848_GPIO_DMA_CTL);
4194 
4195 	/* Then, push to 0 the reset pin long enough to reset the *
4196 	 * device same as above for the reset line, but not the same
4197 	 * value sent to the GPIO-connected stuff
4198 	 * which one is the good one? */
4199 	gpio_inout(0xffffff,(1<<2));
4200 	gpio_write(0);
4201 	udelay(10);
4202 	gpio_write(1<<2);
4203 
4204 	for (i = 0; i < ARRAY_SIZE(vals); i++) {
4205 		tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1);
4206 		if (tmp != -1) {
4207 			pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n",
4208 			       vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL));
4209 		}
4210 	}
4211 
4212 	pr_info("PXC200 Initialised\n");
4213 }
4214 
4215 
4216 
4217 /* ----------------------------------------------------------------------- */
4218 /*
4219  *  The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock
4220  *  it. This apparently involves the following procedure for each 878 chip:
4221  *
4222  *  1) write 0x00C3FEFF to the GPIO_OUT_EN register
4223  *
4224  *  2)  write to GPIO_DATA
4225  *      - 0x0E
4226  *      - sleep 1ms
4227  *      - 0x10 + 0x0E
4228  *      - sleep 10ms
4229  *      - 0x0E
4230  *     read from GPIO_DATA into buf (uint_32)
4231  *      - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 )
4232  *                 error. ERROR_CPLD_Check_Failed stop.
4233  *
4234  *  3) write to GPIO_DATA
4235  *      - write 0x4400 + 0x0E
4236  *      - sleep 10ms
4237  *      - write 0x4410 + 0x0E
4238  *      - sleep 1ms
4239  *      - write 0x0E
4240  *     read from GPIO_DATA into buf (uint_32)
4241  *      - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 )
4242  *                error. ERROR_CPLD_Check_Failed.
4243  */
4244 /* ----------------------------------------------------------------------- */
4245 static void
4246 init_RTV24 (struct bttv *btv)
4247 {
4248 	uint32_t dataRead = 0;
4249 	long watchdog_value = 0x0E;
4250 
4251 	pr_info("%d: Adlink RTV-24 initialisation in progress ...\n",
4252 		btv->c.nr);
4253 
4254 	btwrite (0x00c3feff, BT848_GPIO_OUT_EN);
4255 
4256 	btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4257 	msleep (1);
4258 	btwrite (0x10 + watchdog_value, BT848_GPIO_DATA);
4259 	msleep (10);
4260 	btwrite (0 + watchdog_value, BT848_GPIO_DATA);
4261 
4262 	dataRead = btread (BT848_GPIO_DATA);
4263 
4264 	if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) {
4265 		pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n",
4266 			btv->c.nr, dataRead);
4267 	}
4268 
4269 	btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA);
4270 	msleep (10);
4271 	btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA);
4272 	msleep (1);
4273 	btwrite (watchdog_value, BT848_GPIO_DATA);
4274 	msleep (1);
4275 	dataRead = btread (BT848_GPIO_DATA);
4276 
4277 	if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) {
4278 		pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n",
4279 			btv->c.nr, dataRead);
4280 
4281 		return;
4282 	}
4283 
4284 	pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr);
4285 }
4286 
4287 
4288 
4289 /* ----------------------------------------------------------------------- */
4290 /*
4291  *  The PCI-8604PW contains a CPLD, probably an ispMACH 4A, that filters
4292  *  the PCI REQ signals comming from the four BT878 chips. After power
4293  *  up, the CPLD does not forward requests to the bus, which prevents
4294  *  the BT878 from fetching RISC instructions from memory. While the
4295  *  CPLD is connected to most of the GPIOs of PCI device 0xD, only
4296  *  five appear to play a role in unlocking the REQ signal. The following
4297  *  sequence has been determined by trial and error without access to the
4298  *  original driver.
4299  *
4300  *  Eight GPIOs of device 0xC are provided on connector CN4 (4 in, 4 out).
4301  *  Devices 0xE and 0xF do not appear to have anything connected to their
4302  *  GPIOs.
4303  *
4304  *  The correct GPIO_OUT_EN value might have some more bits set. It should
4305  *  be possible to derive it from a boundary scan of the CPLD. Its JTAG
4306  *  pins are routed to test points.
4307  *
4308  */
4309 /* ----------------------------------------------------------------------- */
4310 static void
4311 init_PCI8604PW(struct bttv *btv)
4312 {
4313 	int state;
4314 
4315 	if ((PCI_SLOT(btv->c.pci->devfn) & ~3) != 0xC) {
4316 		pr_warn("This is not a PCI-8604PW\n");
4317 		return;
4318 	}
4319 
4320 	if (PCI_SLOT(btv->c.pci->devfn) != 0xD)
4321 		return;
4322 
4323 	btwrite(0x080002, BT848_GPIO_OUT_EN);
4324 
4325 	state = (btread(BT848_GPIO_DATA) >> 21) & 7;
4326 
4327 	for (;;) {
4328 		switch (state) {
4329 		case 1:
4330 		case 5:
4331 		case 6:
4332 		case 4:
4333 			pr_debug("PCI-8604PW in state %i, toggling pin\n",
4334 				 state);
4335 			btwrite(0x080000, BT848_GPIO_DATA);
4336 			msleep(1);
4337 			btwrite(0x000000, BT848_GPIO_DATA);
4338 			msleep(1);
4339 			break;
4340 		case 7:
4341 			pr_info("PCI-8604PW unlocked\n");
4342 			return;
4343 		case 0:
4344 			/* FIXME: If we are in state 7 and toggle GPIO[19] one
4345 			   more time, the CPLD goes into state 0, where PCI bus
4346 			   mastering is inhibited again. We have not managed to
4347 			   get out of that state. */
4348 
4349 			pr_err("PCI-8604PW locked until reset\n");
4350 			return;
4351 		default:
4352 			pr_err("PCI-8604PW in unknown state %i\n", state);
4353 			return;
4354 		}
4355 
4356 		state = (state << 4) | ((btread(BT848_GPIO_DATA) >> 21) & 7);
4357 
4358 		switch (state) {
4359 		case 0x15:
4360 		case 0x56:
4361 		case 0x64:
4362 		case 0x47:
4363 		/* The transition from state 7 to state 0 is, as explained
4364 		   above, valid but undesired and with this code impossible
4365 		   as we exit as soon as we are in state 7.
4366 		case 0x70: */
4367 			break;
4368 		default:
4369 			pr_err("PCI-8604PW invalid transition %i -> %i\n",
4370 			       state >> 4, state & 7);
4371 			return;
4372 		}
4373 		state &= 7;
4374 	}
4375 }
4376 
4377 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas]
4378  *
4379  * This is needed because rv605 don't use a normal multiplex, but a crosspoint
4380  * switch instead (CD22M3494E). This IC can have multiple active connections
4381  * between Xn (input) and Yn (output) pins. We need to clear any existing
4382  * connection prior to establish a new one, pulsing the STROBE pin.
4383  *
4384  * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin.
4385  * GPIO pins are wired as:
4386  *  GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller)
4387  *  GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller)
4388  *  GPIO[7]   - DATA (xpoint)    - P1[7] (microcontroller)
4389  *  GPIO[8]   -                  - P3[5] (microcontroller)
4390  *  GPIO[9]   - RESET (xpoint)   - P3[6] (microcontroller)
4391  *  GPIO[10]  - STROBE (xpoint)  - P3[7] (microcontroller)
4392  *  GPINTR    -                  - P3[4] (microcontroller)
4393  *
4394  * The microcontroller is a 80C32 like. It should be possible to change xpoint
4395  * configuration either directly (as we are doing) or using the microcontroller
4396  * which is also wired to I2C interface. I have no further info on the
4397  * microcontroller features, one would need to disassembly the firmware.
4398  * note: the vendor refused to give any information on this product, all
4399  *       that stuff was found using a multimeter! :)
4400  */
4401 static void rv605_muxsel(struct bttv *btv, unsigned int input)
4402 {
4403 	static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0,
4404 				      0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa };
4405 
4406 	gpio_bits(0x07f, muxgpio[input]);
4407 
4408 	/* reset all conections */
4409 	gpio_bits(0x200,0x200);
4410 	mdelay(1);
4411 	gpio_bits(0x200,0x000);
4412 	mdelay(1);
4413 
4414 	/* create a new connection */
4415 	gpio_bits(0x480,0x480);
4416 	mdelay(1);
4417 	gpio_bits(0x480,0x080);
4418 	mdelay(1);
4419 }
4420 
4421 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning]
4422  *
4423  * The CS16 (available on eBay cheap) is a PCI board with four Fusion
4424  * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator
4425  * chips, ten eight input analog multiplexors, a not chip and a few
4426  * other components.
4427  *
4428  * 16 inputs on a secondary bracket are provided and can be selected
4429  * from each of the four capture chips.  Two of the eight input
4430  * multiplexors are used to select from any of the 16 input signals.
4431  *
4432  * Unsupported hardware capabilities:
4433  *  . A video output monitor on the secondary bracket can be selected from
4434  *    one of the 878A chips.
4435  *  . Another passthrough but I haven't spent any time investigating it.
4436  *  . Digital I/O (logic level connected to GPIO) is available from an
4437  *    onboard header.
4438  *
4439  * The on chip input mux should always be set to 2.
4440  * GPIO[16:19] - Video input selection
4441  * GPIO[0:3]   - Video output monitor select (only available from one 878A)
4442  * GPIO[?:?]   - Digital I/O.
4443  *
4444  * There is an ATMEL microcontroller with an 8031 core on board.  I have not
4445  * determined what function (if any) it provides.  With the microcontroller
4446  * and sync separator chips a guess is that it might have to do with video
4447  * switching and maybe some digital I/O.
4448  */
4449 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input)
4450 {
4451 	/* video mux */
4452 	gpio_bits(0x0f0000, input << 16);
4453 }
4454 
4455 static void tibetCS16_init(struct bttv *btv)
4456 {
4457 	/* enable gpio bits, mask obtained via btSpy */
4458 	gpio_inout(0xffffff, 0x0f7fff);
4459 	gpio_write(0x0f7fff);
4460 }
4461 
4462 /*
4463  * The following routines for the Kodicom-4400r get a little mind-twisting.
4464  * There is a "master" controller and three "slave" controllers, together
4465  * an analog switch which connects any of 16 cameras to any of the BT87A's.
4466  * The analog switch is controlled by the "master", but the detection order
4467  * of the four BT878A chips is in an order which I just don't understand.
4468  * The "master" is actually the second controller to be detected.  The
4469  * logic on the board uses logical numbers for the 4 controllers, but
4470  * those numbers are different from the detection sequence.  When working
4471  * with the analog switch, we need to "map" from the detection sequence
4472  * over to the board's logical controller number.  This mapping sequence
4473  * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical
4474  * unit 3, the second (which is the master) is logical unit 0, etc.
4475  * We need to maintain the status of the analog switch (which of the 16
4476  * cameras is connected to which of the 4 controllers) in sw_status array.
4477  */
4478 
4479 /*
4480  * First a routine to set the analog switch, which controls which camera
4481  * is routed to which controller.  The switch comprises an X-address
4482  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4483  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4484  * A data value (gpio bit 7) of '1' enables the switch, and '0' disables
4485  * the switch.  A STROBE bit (gpio bit 8) latches the data value into the
4486  * specified address.  The idea is to set the address and data, then bring
4487  * STROBE high, and finally bring STROBE back to low.
4488  */
4489 static void kodicom4400r_write(struct bttv *btv,
4490 			       unsigned char xaddr,
4491 			       unsigned char yaddr,
4492 			       unsigned char data) {
4493 	unsigned int udata;
4494 
4495 	udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf);
4496 	gpio_bits(0x1ff, udata);		/* write ADDR and DAT */
4497 	gpio_bits(0x1ff, udata | (1 << 8));	/* strobe high */
4498 	gpio_bits(0x1ff, udata);		/* strobe low */
4499 }
4500 
4501 /*
4502  * Next the mux select.  Both the "master" and "slave" 'cards' (controllers)
4503  * use this routine.  The routine finds the "master" for the card, maps
4504  * the controller number from the detected position over to the logical
4505  * number, writes the appropriate data to the analog switch, and housekeeps
4506  * the local copy of the switch information.  The parameter 'input' is the
4507  * requested camera number (0 - 15).
4508  */
4509 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input)
4510 {
4511 	int xaddr, yaddr;
4512 	struct bttv *mctlr;
4513 	static unsigned char map[4] = {3, 0, 2, 1};
4514 
4515 	mctlr = master[btv->c.nr];
4516 	if (mctlr == NULL) {	/* ignore if master not yet detected */
4517 		return;
4518 	}
4519 	yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */
4520 	yaddr = map[yaddr];
4521 	xaddr = input & 0xf;
4522 	/* Check if the controller/camera pair has changed, else ignore */
4523 	if (mctlr->sw_status[yaddr] != xaddr)
4524 	{
4525 		/* "open" the old switch, "close" the new one, save the new */
4526 		kodicom4400r_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0);
4527 		mctlr->sw_status[yaddr] = xaddr;
4528 		kodicom4400r_write(mctlr, xaddr, yaddr, 1);
4529 	}
4530 }
4531 
4532 /*
4533  * During initialisation, we need to reset the analog switch.  We
4534  * also preset the switch to map the 4 connectors on the card to the
4535  * *user's* (see above description of kodicom4400r_muxsel) channels
4536  * 0 through 3
4537  */
4538 static void kodicom4400r_init(struct bttv *btv)
4539 {
4540 	int ix;
4541 
4542 	gpio_inout(0x0003ff, 0x0003ff);
4543 	gpio_write(1 << 9);	/* reset MUX */
4544 	gpio_write(0);
4545 	/* Preset camera 0 to the 4 controllers */
4546 	for (ix = 0; ix < 4; ix++) {
4547 		btv->sw_status[ix] = ix;
4548 		kodicom4400r_write(btv, ix, ix, 1);
4549 	}
4550 	/*
4551 	 * Since this is the "master", we need to set up the
4552 	 * other three controller chips' pointers to this structure
4553 	 * for later use in the muxsel routine.
4554 	 */
4555 	if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3))
4556 	    return;
4557 	master[btv->c.nr-1] = btv;
4558 	master[btv->c.nr]   = btv;
4559 	master[btv->c.nr+1] = btv;
4560 	master[btv->c.nr+2] = btv;
4561 }
4562 
4563 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel
4564  * video multiplexers to provide up to 16 video inputs. These
4565  * multiplexers are controlled by the lower 8 GPIO pins of the
4566  * bt878. The multiplexers probably Pericom PI5V331Q or similar.
4567 
4568  * xxx0 is pin xxx of multiplexer U5,
4569  * yyy1 is pin yyy of multiplexer U2
4570  */
4571 #define ENA0    0x01
4572 #define ENB0    0x02
4573 #define ENA1    0x04
4574 #define ENB1    0x08
4575 
4576 #define IN10    0x10
4577 #define IN00    0x20
4578 #define IN11    0x40
4579 #define IN01    0x80
4580 
4581 static void xguard_muxsel(struct bttv *btv, unsigned int input)
4582 {
4583 	static const int masks[] = {
4584 		ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10,
4585 		ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10,
4586 		ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11,
4587 		ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11,
4588 	};
4589 	gpio_write(masks[input%16]);
4590 }
4591 static void picolo_tetra_init(struct bttv *btv)
4592 {
4593 	/*This is the video input redirection fonctionality : I DID NOT USED IT. */
4594 	btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */
4595 	btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A]  set to 1*/
4596 }
4597 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input)
4598 {
4599 
4600 	dprintk("%d : picolo_tetra_muxsel =>  input = %d\n", btv->c.nr, input);
4601 	/*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/
4602 	/*GPIO[20]&GPIO[21] used to choose the right input*/
4603 	btwrite (input<<20,BT848_GPIO_DATA);
4604 
4605 }
4606 
4607 /*
4608  * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>]
4609  *
4610  * The IVC120G security card has 4 i2c controlled TDA8540 matrix
4611  * swichers to provide 16 channels to MUX0. The TDA8540's have
4612  * 4 independent outputs and as such the IVC120G also has the
4613  * optional "Monitor Out" bus. This allows the card to be looking
4614  * at one input while the monitor is looking at another.
4615  *
4616  * Since I've couldn't be bothered figuring out how to add an
4617  * independent muxsel for the monitor bus, I've just set it to
4618  * whatever the card is looking at.
4619  *
4620  *  OUT0 of the TDA8540's is connected to MUX0         (0x03)
4621  *  OUT1 of the TDA8540's is connected to "Monitor Out"        (0x0C)
4622  *
4623  *  TDA8540_ALT3 IN0-3 = Channel 13 - 16       (0x03)
4624  *  TDA8540_ALT4 IN0-3 = Channel 1 - 4         (0x03)
4625  *  TDA8540_ALT5 IN0-3 = Channel 5 - 8         (0x03)
4626  *  TDA8540_ALT6 IN0-3 = Channel 9 - 12                (0x03)
4627  *
4628  */
4629 
4630 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */
4631 #define I2C_TDA8540        0x90
4632 #define I2C_TDA8540_ALT1   0x92
4633 #define I2C_TDA8540_ALT2   0x94
4634 #define I2C_TDA8540_ALT3   0x96
4635 #define I2C_TDA8540_ALT4   0x98
4636 #define I2C_TDA8540_ALT5   0x9a
4637 #define I2C_TDA8540_ALT6   0x9c
4638 
4639 static void ivc120_muxsel(struct bttv *btv, unsigned int input)
4640 {
4641 	/* Simple maths */
4642 	int key = input % 4;
4643 	int matrix = input / 4;
4644 
4645 	dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n",
4646 		btv->c.nr, input, matrix, key);
4647 
4648 	/* Handles the input selection on the TDA8540's */
4649 	bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00,
4650 		      ((matrix == 3) ? (key | key << 2) : 0x00), 1);
4651 	bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00,
4652 		      ((matrix == 0) ? (key | key << 2) : 0x00), 1);
4653 	bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00,
4654 		      ((matrix == 1) ? (key | key << 2) : 0x00), 1);
4655 	bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00,
4656 		      ((matrix == 2) ? (key | key << 2) : 0x00), 1);
4657 
4658 	/* Handles the output enables on the TDA8540's */
4659 	bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02,
4660 		      ((matrix == 3) ? 0x03 : 0x00), 1);  /* 13 - 16 */
4661 	bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02,
4662 		      ((matrix == 0) ? 0x03 : 0x00), 1);  /* 1-4 */
4663 	bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02,
4664 		      ((matrix == 1) ? 0x03 : 0x00), 1);  /* 5-8 */
4665 	bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02,
4666 		      ((matrix == 2) ? 0x03 : 0x00), 1);  /* 9-12 */
4667 
4668 	/* 878's MUX0 is already selected for input via muxsel values */
4669 }
4670 
4671 
4672 /* PXC200 muxsel helper
4673  * luke@syseng.anu.edu.au
4674  * another transplant
4675  * from Alessandro Rubini (rubini@linux.it)
4676  *
4677  * There are 4 kinds of cards:
4678  * PXC200L which is bt848
4679  * PXC200F which is bt848 with PIC controlling mux
4680  * PXC200AL which is bt878
4681  * PXC200AF which is bt878 with PIC controlling mux
4682  */
4683 #define PX_CFG_PXC200F 0x01
4684 #define PX_FLAG_PXC200A  0x00001000 /* a pxc200A is bt-878 based */
4685 #define PX_I2C_PIC       0x0f
4686 #define PX_PXC200A_CARDID 0x200a1295
4687 #define PX_I2C_CMD_CFG   0x00
4688 
4689 static void PXC200_muxsel(struct bttv *btv, unsigned int input)
4690 {
4691 	int rc;
4692 	long mux;
4693 	int bitmask;
4694 	unsigned char buf[2];
4695 
4696 	/* Read PIC config to determine if this is a PXC200F */
4697 	/* PX_I2C_CMD_CFG*/
4698 	buf[0]=0;
4699 	buf[1]=0;
4700 	rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1);
4701 	if (rc) {
4702 		pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n",
4703 			 btv->c.nr, rc);
4704 	  /* not PXC ? do nothing */
4705 		return;
4706 	}
4707 
4708 	rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL);
4709 	if (!(rc & PX_CFG_PXC200F)) {
4710 		pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n",
4711 			 btv->c.nr, rc);
4712 		return;
4713 	}
4714 
4715 
4716 	/* The multiplexer in the 200F is handled by the GPIO port */
4717 	/* get correct mapping between inputs  */
4718 	/*  mux = bttv_tvcards[btv->type].muxsel[input] & 3; */
4719 	/* ** not needed!?   */
4720 	mux = input;
4721 
4722 	/* make sure output pins are enabled */
4723 	/* bitmask=0x30f; */
4724 	bitmask=0x302;
4725 	/* check whether we have a PXC200A */
4726 	if (btv->cardid == PX_PXC200A_CARDID)  {
4727 	   bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */
4728 	   bitmask |= 7<<4; /* the DAC */
4729 	}
4730 	btwrite(bitmask, BT848_GPIO_OUT_EN);
4731 
4732 	bitmask = btread(BT848_GPIO_DATA);
4733 	if (btv->cardid == PX_PXC200A_CARDID)
4734 	  bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7);
4735 	else /* older device */
4736 	  bitmask = (bitmask & ~0x300) | ((mux & 3) << 8);
4737 	btwrite(bitmask,BT848_GPIO_DATA);
4738 
4739 	/*
4740 	 * Was "to be safe, set the bt848 to input 0"
4741 	 * Actually, since it's ok at load time, better not messing
4742 	 * with these bits (on PXC200AF you need to set mux 2 here)
4743 	 *
4744 	 * needed because bttv-driver sets mux before calling this function
4745 	 */
4746 	if (btv->cardid == PX_PXC200A_CARDID)
4747 	  btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM);
4748 	else /* older device */
4749 	  btand(~BT848_IFORM_MUXSEL,BT848_IFORM);
4750 
4751 	pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux);
4752 }
4753 
4754 static void phytec_muxsel(struct bttv *btv, unsigned int input)
4755 {
4756 	unsigned int mux = input % 4;
4757 
4758 	if (input == btv->svhs)
4759 		mux = 0;
4760 
4761 	gpio_bits(0x3, mux);
4762 }
4763 
4764 /*
4765  * GeoVision GV-800(S) functions
4766  * Bruno Christo <bchristo@inf.ufsm.br>
4767 */
4768 
4769 /* This is a function to control the analog switch, which determines which
4770  * camera is routed to which controller.  The switch comprises an X-address
4771  * (gpio bits 0-3, representing the camera, ranging from 0-15), and a
4772  * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3).
4773  * A data value (gpio bit 18) of '1' enables the switch, and '0' disables
4774  * the switch.  A STROBE bit (gpio bit 17) latches the data value into the
4775  * specified address. There is also a chip select (gpio bit 16).
4776  * The idea is to set the address and chip select together, bring
4777  * STROBE high, write the data, and finally bring STROBE back to low.
4778  */
4779 static void gv800s_write(struct bttv *btv,
4780 			 unsigned char xaddr,
4781 			 unsigned char yaddr,
4782 			 unsigned char data) {
4783 	/* On the "master" 878A:
4784 	* GPIO bits 0-9 are used for the analog switch:
4785 	*   00 - 03:	camera selector
4786 	*   04 - 06:	878A (controller) selector
4787 	*   16:		cselect
4788 	*   17:		strobe
4789 	*   18:		data (1->on, 0->off)
4790 	*   19:		reset
4791 	*/
4792 	const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4);
4793 	const u32 CSELECT = 1<<16;
4794 	const u32 STROBE = 1<<17;
4795 	const u32 DATA = data<<18;
4796 
4797 	gpio_bits(0x1007f, ADDRESS | CSELECT);	/* write ADDRESS and CSELECT */
4798 	gpio_bits(0x20000, STROBE);		/* STROBE high */
4799 	gpio_bits(0x40000, DATA);		/* write DATA */
4800 	gpio_bits(0x20000, ~STROBE);		/* STROBE low */
4801 }
4802 
4803 /*
4804  * GeoVision GV-800(S) muxsel
4805  *
4806  * Each of the 4 cards (controllers) use this function.
4807  * The controller using this function selects the input through the GPIO pins
4808  * of the "master" card. A pointer to this card is stored in master[btv->c.nr].
4809  *
4810  * The parameter 'input' is the requested camera number (0-4) on the controller.
4811  * The map array has the address of each input. Note that the addresses in the
4812  * array are in the sequence the original GeoVision driver uses, that is, set
4813  * every controller to input 0, then to input 1, 2, 3, repeat. This means that
4814  * the physical "camera 1" connector corresponds to controller 0 input 0,
4815  * "camera 2" corresponds to controller 1 input 0, and so on.
4816  *
4817  * After getting the input address, the function then writes the appropriate
4818  * data to the analog switch, and housekeeps the local copy of the switch
4819  * information.
4820  */
4821 static void gv800s_muxsel(struct bttv *btv, unsigned int input)
4822 {
4823 	struct bttv *mctlr;
4824 	int xaddr, yaddr;
4825 	static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 },
4826 					  { 0x1, 0x5, 0xb, 0x7 },
4827 					  { 0x2, 0x8, 0xc, 0xe },
4828 					  { 0x3, 0x9, 0xd, 0xf } };
4829 	input = input%4;
4830 	mctlr = master[btv->c.nr];
4831 	if (mctlr == NULL) {
4832 		/* do nothing until the "master" is detected */
4833 		return;
4834 	}
4835 	yaddr = (btv->c.nr - mctlr->c.nr) & 3;
4836 	xaddr = map[yaddr][input] & 0xf;
4837 
4838 	/* Check if the controller/camera pair has changed, ignore otherwise */
4839 	if (mctlr->sw_status[yaddr] != xaddr) {
4840 		/* disable the old switch, enable the new one and save status */
4841 		gv800s_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0);
4842 		mctlr->sw_status[yaddr] = xaddr;
4843 		gv800s_write(mctlr, xaddr, yaddr, 1);
4844 	}
4845 }
4846 
4847 /* GeoVision GV-800(S) "master" chip init */
4848 static void gv800s_init(struct bttv *btv)
4849 {
4850 	int ix;
4851 
4852 	gpio_inout(0xf107f, 0xf107f);
4853 	gpio_write(1<<19); /* reset the analog MUX */
4854 	gpio_write(0);
4855 
4856 	/* Preset camera 0 to the 4 controllers */
4857 	for (ix = 0; ix < 4; ix++) {
4858 		btv->sw_status[ix] = ix;
4859 		gv800s_write(btv, ix, ix, 1);
4860 	}
4861 
4862 	/* Inputs on the "master" controller need this brightness fix */
4863 	bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1);
4864 
4865 	if (btv->c.nr > BTTV_MAX-4)
4866 		return;
4867 	/*
4868 	 * Store the "master" controller pointer in the master
4869 	 * array for later use in the muxsel function.
4870 	 */
4871 	master[btv->c.nr]   = btv;
4872 	master[btv->c.nr+1] = btv;
4873 	master[btv->c.nr+2] = btv;
4874 	master[btv->c.nr+3] = btv;
4875 }
4876 
4877 /* ----------------------------------------------------------------------- */
4878 /* motherboard chipset specific stuff                                      */
4879 
4880 void __init bttv_check_chipset(void)
4881 {
4882 	int pcipci_fail = 0;
4883 	struct pci_dev *dev = NULL;
4884 
4885 	if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL))	/* should check if target is AGP */
4886 		pcipci_fail = 1;
4887 	if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF))
4888 		triton1 = 1;
4889 	if (pci_pci_problems & PCIPCI_VSFX)
4890 		vsfx = 1;
4891 #ifdef PCIPCI_ALIMAGIK
4892 	if (pci_pci_problems & PCIPCI_ALIMAGIK)
4893 		latency = 0x0A;
4894 #endif
4895 
4896 
4897 	/* print warnings about any quirks found */
4898 	if (triton1)
4899 		pr_info("Host bridge needs ETBF enabled\n");
4900 	if (vsfx)
4901 		pr_info("Host bridge needs VSFX enabled\n");
4902 	if (pcipci_fail) {
4903 		pr_info("bttv and your chipset may not work together\n");
4904 		if (!no_overlay) {
4905 			pr_info("overlay will be disabled\n");
4906 			no_overlay = 1;
4907 		} else {
4908 			pr_info("overlay forced. Use this option at your own risk.\n");
4909 		}
4910 	}
4911 	if (UNSET != latency)
4912 		pr_info("pci latency fixup [%d]\n", latency);
4913 	while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL,
4914 				      PCI_DEVICE_ID_INTEL_82441, dev))) {
4915 		unsigned char b;
4916 		pci_read_config_byte(dev, 0x53, &b);
4917 		if (bttv_debug)
4918 			pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n",
4919 				b);
4920 	}
4921 }
4922 
4923 int bttv_handle_chipset(struct bttv *btv)
4924 {
4925 	unsigned char command;
4926 
4927 	if (!triton1 && !vsfx && UNSET == latency)
4928 		return 0;
4929 
4930 	if (bttv_verbose) {
4931 		if (triton1)
4932 			pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n",
4933 				btv->c.nr);
4934 		if (vsfx && btv->id >= 878)
4935 			pr_info("%d: enabling VSFX\n", btv->c.nr);
4936 		if (UNSET != latency)
4937 			pr_info("%d: setting pci timer to %d\n",
4938 				btv->c.nr, latency);
4939 	}
4940 
4941 	if (btv->id < 878) {
4942 		/* bt848 (mis)uses a bit in the irq mask for etbf */
4943 		if (triton1)
4944 			btv->triton1 = BT848_INT_ETBF;
4945 	} else {
4946 		/* bt878 has a bit in the pci config space for it */
4947 		pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command);
4948 		if (triton1)
4949 			command |= BT878_EN_TBFX;
4950 		if (vsfx)
4951 			command |= BT878_EN_VSFX;
4952 		pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command);
4953 	}
4954 	if (UNSET != latency)
4955 		pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency);
4956 	return 0;
4957 }
4958