1 /* 2 3 bttv-cards.c 4 5 this file has configuration informations - card-specific stuff 6 like the big tvcards array for the most part 7 8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) 9 & Marcus Metzler (mocm@thp.uni-koeln.de) 10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de> 11 12 This program is free software; you can redistribute it and/or modify 13 it under the terms of the GNU General Public License as published by 14 the Free Software Foundation; either version 2 of the License, or 15 (at your option) any later version. 16 17 This program is distributed in the hope that it will be useful, 18 but WITHOUT ANY WARRANTY; without even the implied warranty of 19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 GNU General Public License for more details. 21 22 You should have received a copy of the GNU General Public License 23 along with this program; if not, write to the Free Software 24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 25 26 */ 27 28 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 29 30 #include <linux/delay.h> 31 #include <linux/module.h> 32 #include <linux/kmod.h> 33 #include <linux/init.h> 34 #include <linux/pci.h> 35 #include <linux/vmalloc.h> 36 #include <linux/firmware.h> 37 #include <net/checksum.h> 38 39 #include <asm/unaligned.h> 40 #include <asm/io.h> 41 42 #include "bttvp.h" 43 #include <media/v4l2-common.h> 44 #include <media/tvaudio.h> 45 #include "bttv-audio-hook.h" 46 47 /* fwd decl */ 48 static void boot_msp34xx(struct bttv *btv, int pin); 49 static void hauppauge_eeprom(struct bttv *btv); 50 static void avermedia_eeprom(struct bttv *btv); 51 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]); 52 static void modtec_eeprom(struct bttv *btv); 53 static void init_PXC200(struct bttv *btv); 54 static void init_RTV24(struct bttv *btv); 55 56 static void rv605_muxsel(struct bttv *btv, unsigned int input); 57 static void eagle_muxsel(struct bttv *btv, unsigned int input); 58 static void xguard_muxsel(struct bttv *btv, unsigned int input); 59 static void ivc120_muxsel(struct bttv *btv, unsigned int input); 60 static void gvc1100_muxsel(struct bttv *btv, unsigned int input); 61 62 static void PXC200_muxsel(struct bttv *btv, unsigned int input); 63 64 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input); 65 static void picolo_tetra_init(struct bttv *btv); 66 67 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input); 68 static void tibetCS16_init(struct bttv *btv); 69 70 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input); 71 static void kodicom4400r_init(struct bttv *btv); 72 73 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input); 74 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input); 75 76 static void geovision_muxsel(struct bttv *btv, unsigned int input); 77 78 static void phytec_muxsel(struct bttv *btv, unsigned int input); 79 80 static void gv800s_muxsel(struct bttv *btv, unsigned int input); 81 static void gv800s_init(struct bttv *btv); 82 83 static void td3116_muxsel(struct bttv *btv, unsigned int input); 84 85 static int terratec_active_radio_upgrade(struct bttv *btv); 86 static int tea5757_read(struct bttv *btv); 87 static int tea5757_write(struct bttv *btv, int value); 88 static void identify_by_eeprom(struct bttv *btv, 89 unsigned char eeprom_data[256]); 90 static int pvr_boot(struct bttv *btv); 91 92 /* config variables */ 93 static unsigned int triton1; 94 static unsigned int vsfx; 95 static unsigned int latency = UNSET; 96 int no_overlay=-1; 97 98 static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 99 static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 100 static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 101 static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 102 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 103 static unsigned int audiodev[BTTV_MAX]; 104 static unsigned int saa6588[BTTV_MAX]; 105 static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL }; 106 static unsigned int autoload = UNSET; 107 static unsigned int gpiomask = UNSET; 108 static unsigned int audioall = UNSET; 109 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET }; 110 111 /* insmod options */ 112 module_param(triton1, int, 0444); 113 module_param(vsfx, int, 0444); 114 module_param(no_overlay, int, 0444); 115 module_param(latency, int, 0444); 116 module_param(gpiomask, int, 0444); 117 module_param(audioall, int, 0444); 118 module_param(autoload, int, 0444); 119 120 module_param_array(card, int, NULL, 0444); 121 module_param_array(pll, int, NULL, 0444); 122 module_param_array(tuner, int, NULL, 0444); 123 module_param_array(svhs, int, NULL, 0444); 124 module_param_array(remote, int, NULL, 0444); 125 module_param_array(audiodev, int, NULL, 0444); 126 module_param_array(audiomux, int, NULL, 0444); 127 128 MODULE_PARM_DESC(triton1,"set ETBF pci config bit " 129 "[enable bug compatibility for triton1 + others]"); 130 MODULE_PARM_DESC(vsfx,"set VSFX pci config bit " 131 "[yet another chipset flaw workaround]"); 132 MODULE_PARM_DESC(latency,"pci latency timer"); 133 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list"); 134 MODULE_PARM_DESC(pll,"specify installed crystal (0=none, 28=28 MHz, 35=35 MHz)"); 135 MODULE_PARM_DESC(tuner,"specify installed tuner type"); 136 MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore"); 137 MODULE_PARM_DESC(audiodev, "specify audio device:\n" 138 "\t\t-1 = no audio\n" 139 "\t\t 0 = autodetect (default)\n" 140 "\t\t 1 = msp3400\n" 141 "\t\t 2 = tda7432\n" 142 "\t\t 3 = tvaudio"); 143 MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition."); 144 MODULE_PARM_DESC(no_overlay,"allow override overlay default (0 disables, 1 enables)" 145 " [some VIA/SIS chipsets are known to have problem with overlay]"); 146 147 /* ----------------------------------------------------------------------- */ 148 /* list of card IDs for bt878+ cards */ 149 150 static struct CARD { 151 unsigned id; 152 int cardnr; 153 char *name; 154 } cards[] = { 155 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" }, 156 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" }, 157 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" }, 158 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" }, 159 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" }, 160 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" }, 161 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" }, 162 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" }, 163 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" }, 164 165 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" }, 166 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" }, 167 168 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, 169 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" }, 170 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" }, 171 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, 172 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, 173 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" }, 174 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" }, 175 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, 176 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, 177 178 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, 179 /* some cards ship with byteswapped IDs ... */ 180 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, 181 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, 182 /* this seems to happen as well ... */ 183 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, 184 185 { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" }, 186 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" }, 187 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" }, 188 189 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" }, 190 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" }, 191 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" }, 192 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" }, 193 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" }, 194 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" }, 195 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" }, 196 197 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, 198 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" }, 199 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, 200 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" }, 201 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" }, 202 203 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" }, 204 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" }, 205 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" }, 206 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" }, 207 208 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" }, 209 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" }, 210 /* clashes with FlyVideo 211 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */ 212 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" }, 213 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */ 214 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */ 215 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */ 216 217 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, 218 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, 219 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, 220 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, 221 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, 222 223 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" }, 224 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" }, 225 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" }, 226 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" }, 227 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" }, 228 229 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" }, 230 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" }, 231 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" }, 232 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" }, 233 234 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" }, 235 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" }, 236 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" }, 237 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" }, 238 239 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" }, 240 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" }, 241 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" }, 242 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" }, 243 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" }, 244 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" }, 245 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" }, 246 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" }, 247 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" }, 248 { 0xa1550800, BTTV_BOARD_IVC200, "IVC-200" }, 249 { 0xa1550801, BTTV_BOARD_IVC200, "IVC-200" }, 250 { 0xa1550802, BTTV_BOARD_IVC200, "IVC-200" }, 251 { 0xa1550803, BTTV_BOARD_IVC200, "IVC-200" }, 252 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" }, 253 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" }, 254 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" }, 255 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" }, 256 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" }, 257 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" }, 258 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" }, 259 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" }, 260 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" }, 261 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" }, 262 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" }, 263 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" }, 264 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" }, 265 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" }, 266 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" }, 267 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" }, 268 { 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 269 { 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 270 { 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 271 { 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 272 273 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" }, 274 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" }, 275 276 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, 277 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, 278 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" }, 279 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" }, 280 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" }, 281 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" }, 282 283 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" }, 284 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" }, 285 286 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" }, 287 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, 288 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, 289 { 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" }, 290 { 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" }, 291 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" }, 292 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" }, 293 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" }, 294 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" }, 295 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" }, 296 297 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" }, 298 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" }, 299 300 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" }, 301 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" }, 302 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" }, 303 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" }, 304 305 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" }, 306 307 { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" }, 308 { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" }, 309 310 /* likely broken, vendor id doesn't match the other magic views ... 311 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */ 312 313 /* Duplicate PCI ID, reconfigure for this board during the eeprom read. 314 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */ 315 316 { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"}, 317 318 /* DVB cards (using pci function .1 for mpeg data xfer) */ 319 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" }, 320 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" }, 321 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"}, 322 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" }, 323 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" }, 324 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" }, 325 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" }, 326 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" }, 327 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" }, 328 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" }, 329 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" }, 330 { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "}, 331 { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" }, 332 { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" }, 333 { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" }, 334 { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" }, 335 { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, 336 { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, 337 { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, 338 339 { 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" }, 340 { 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" }, 341 { 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" }, 342 { 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" }, 343 { 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" }, 344 { 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" }, 345 { 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" }, 346 { 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" }, 347 { 0x3116f200, BTTV_BOARD_TVT_TD3116, "Tongwei Video Technology TD-3116" }, 348 { 0x02280279, BTTV_BOARD_APOSONIC_WDVR, "Aposonic W-DVR" }, 349 { 0, -1, NULL } 350 }; 351 352 /* ----------------------------------------------------------------------- */ 353 /* array with description for bt848 / bt878 tv/grabber cards */ 354 355 struct tvcard bttv_tvcards[] = { 356 /* ---- card 0x00 ---------------------------------- */ 357 [BTTV_BOARD_UNKNOWN] = { 358 .name = " *** UNKNOWN/GENERIC *** ", 359 .video_inputs = 4, 360 .svhs = 2, 361 .muxsel = MUXSEL(2, 3, 1, 0), 362 .tuner_type = UNSET, 363 .tuner_addr = ADDR_UNSET, 364 }, 365 [BTTV_BOARD_MIRO] = { 366 .name = "MIRO PCTV", 367 .video_inputs = 4, 368 /* .audio_inputs= 1, */ 369 .svhs = 2, 370 .gpiomask = 15, 371 .muxsel = MUXSEL(2, 3, 1, 1), 372 .gpiomux = { 2, 0, 0, 0 }, 373 .gpiomute = 10, 374 .tuner_type = UNSET, 375 .tuner_addr = ADDR_UNSET, 376 }, 377 [BTTV_BOARD_HAUPPAUGE] = { 378 .name = "Hauppauge (bt848)", 379 .video_inputs = 4, 380 /* .audio_inputs= 1, */ 381 .svhs = 2, 382 .gpiomask = 7, 383 .muxsel = MUXSEL(2, 3, 1, 1), 384 .gpiomux = { 0, 1, 2, 3 }, 385 .gpiomute = 4, 386 .tuner_type = UNSET, 387 .tuner_addr = ADDR_UNSET, 388 }, 389 [BTTV_BOARD_STB] = { 390 .name = "STB, Gateway P/N 6000699 (bt848)", 391 .video_inputs = 3, 392 /* .audio_inputs= 1, */ 393 .svhs = 2, 394 .gpiomask = 7, 395 .muxsel = MUXSEL(2, 3, 1, 1), 396 .gpiomux = { 4, 0, 2, 3 }, 397 .gpiomute = 1, 398 .no_msp34xx = 1, 399 .tuner_type = TUNER_PHILIPS_NTSC, 400 .tuner_addr = ADDR_UNSET, 401 .pll = PLL_28, 402 .has_radio = 1, 403 }, 404 405 /* ---- card 0x04 ---------------------------------- */ 406 [BTTV_BOARD_INTEL] = { 407 .name = "Intel Create and Share PCI/ Smart Video Recorder III", 408 .video_inputs = 4, 409 /* .audio_inputs= 0, */ 410 .svhs = 2, 411 .gpiomask = 0, 412 .muxsel = MUXSEL(2, 3, 1, 1), 413 .gpiomux = { 0 }, 414 .tuner_type = TUNER_ABSENT, 415 .tuner_addr = ADDR_UNSET, 416 }, 417 [BTTV_BOARD_DIAMOND] = { 418 .name = "Diamond DTV2000", 419 .video_inputs = 4, 420 /* .audio_inputs= 1, */ 421 .svhs = 2, 422 .gpiomask = 3, 423 .muxsel = MUXSEL(2, 3, 1, 0), 424 .gpiomux = { 0, 1, 0, 1 }, 425 .gpiomute = 3, 426 .tuner_type = UNSET, 427 .tuner_addr = ADDR_UNSET, 428 }, 429 [BTTV_BOARD_AVERMEDIA] = { 430 .name = "AVerMedia TVPhone", 431 .video_inputs = 3, 432 /* .audio_inputs= 1, */ 433 .svhs = 3, 434 .muxsel = MUXSEL(2, 3, 1, 1), 435 .gpiomask = 0x0f, 436 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 }, 437 /* 0x04 for some cards ?? */ 438 .tuner_type = UNSET, 439 .tuner_addr = ADDR_UNSET, 440 .audio_mode_gpio= avermedia_tvphone_audio, 441 .has_remote = 1, 442 }, 443 [BTTV_BOARD_MATRIX_VISION] = { 444 .name = "MATRIX-Vision MV-Delta", 445 .video_inputs = 5, 446 /* .audio_inputs= 1, */ 447 .svhs = 3, 448 .gpiomask = 0, 449 .muxsel = MUXSEL(2, 3, 1, 0, 0), 450 .gpiomux = { 0 }, 451 .tuner_type = TUNER_ABSENT, 452 .tuner_addr = ADDR_UNSET, 453 }, 454 455 /* ---- card 0x08 ---------------------------------- */ 456 [BTTV_BOARD_FLYVIDEO] = { 457 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26", 458 .video_inputs = 4, 459 /* .audio_inputs= 1, */ 460 .svhs = 2, 461 .gpiomask = 0xc00, 462 .muxsel = MUXSEL(2, 3, 1, 1), 463 .gpiomux = { 0, 0xc00, 0x800, 0x400 }, 464 .gpiomute = 0xc00, 465 .pll = PLL_28, 466 .tuner_type = UNSET, 467 .tuner_addr = ADDR_UNSET, 468 }, 469 [BTTV_BOARD_TURBOTV] = { 470 .name = "IMS/IXmicro TurboTV", 471 .video_inputs = 3, 472 /* .audio_inputs= 1, */ 473 .svhs = 2, 474 .gpiomask = 3, 475 .muxsel = MUXSEL(2, 3, 1, 1), 476 .gpiomux = { 1, 1, 2, 3 }, 477 .pll = PLL_28, 478 .tuner_type = TUNER_TEMIC_PAL, 479 .tuner_addr = ADDR_UNSET, 480 }, 481 [BTTV_BOARD_HAUPPAUGE878] = { 482 .name = "Hauppauge (bt878)", 483 .video_inputs = 4, 484 /* .audio_inputs= 1, */ 485 .svhs = 2, 486 .gpiomask = 0x0f, /* old: 7 */ 487 .muxsel = MUXSEL(2, 0, 1, 1), 488 .gpiomux = { 0, 1, 2, 3 }, 489 .gpiomute = 4, 490 .pll = PLL_28, 491 .tuner_type = UNSET, 492 .tuner_addr = ADDR_UNSET, 493 }, 494 [BTTV_BOARD_MIROPRO] = { 495 .name = "MIRO PCTV pro", 496 .video_inputs = 3, 497 /* .audio_inputs= 1, */ 498 .svhs = 2, 499 .gpiomask = 0x3014f, 500 .muxsel = MUXSEL(2, 3, 1, 1), 501 .gpiomux = { 0x20001,0x10001, 0, 0 }, 502 .gpiomute = 10, 503 .tuner_type = UNSET, 504 .tuner_addr = ADDR_UNSET, 505 }, 506 507 /* ---- card 0x0c ---------------------------------- */ 508 [BTTV_BOARD_ADSTECH_TV] = { 509 .name = "ADS Technologies Channel Surfer TV (bt848)", 510 .video_inputs = 3, 511 /* .audio_inputs= 1, */ 512 .svhs = 2, 513 .gpiomask = 15, 514 .muxsel = MUXSEL(2, 3, 1, 1), 515 .gpiomux = { 13, 14, 11, 7 }, 516 .tuner_type = UNSET, 517 .tuner_addr = ADDR_UNSET, 518 }, 519 [BTTV_BOARD_AVERMEDIA98] = { 520 .name = "AVerMedia TVCapture 98", 521 .video_inputs = 3, 522 /* .audio_inputs= 4, */ 523 .svhs = 2, 524 .gpiomask = 15, 525 .muxsel = MUXSEL(2, 3, 1, 1), 526 .gpiomux = { 13, 14, 11, 7 }, 527 .msp34xx_alt = 1, 528 .pll = PLL_28, 529 .tuner_type = TUNER_PHILIPS_PAL, 530 .tuner_addr = ADDR_UNSET, 531 .audio_mode_gpio= avermedia_tv_stereo_audio, 532 .no_gpioirq = 1, 533 }, 534 [BTTV_BOARD_VHX] = { 535 .name = "Aimslab Video Highway Xtreme (VHX)", 536 .video_inputs = 3, 537 /* .audio_inputs= 1, */ 538 .svhs = 2, 539 .gpiomask = 7, 540 .muxsel = MUXSEL(2, 3, 1, 1), 541 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */ 542 .gpiomute = 4, 543 .pll = PLL_28, 544 .tuner_type = UNSET, 545 .tuner_addr = ADDR_UNSET, 546 }, 547 [BTTV_BOARD_ZOLTRIX] = { 548 .name = "Zoltrix TV-Max", 549 .video_inputs = 3, 550 /* .audio_inputs= 1, */ 551 .svhs = 2, 552 .gpiomask = 15, 553 .muxsel = MUXSEL(2, 3, 1, 1), 554 .gpiomux = { 0, 0, 1, 0 }, 555 .gpiomute = 10, 556 .tuner_type = UNSET, 557 .tuner_addr = ADDR_UNSET, 558 }, 559 560 /* ---- card 0x10 ---------------------------------- */ 561 [BTTV_BOARD_PIXVIEWPLAYTV] = { 562 .name = "Prolink Pixelview PlayTV (bt878)", 563 .video_inputs = 3, 564 /* .audio_inputs= 1, */ 565 .svhs = 2, 566 .gpiomask = 0x01fe00, 567 .muxsel = MUXSEL(2, 3, 1, 1), 568 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */ 569 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, 570 .gpiomute = 0x002000, 571 .pll = PLL_28, 572 .tuner_type = UNSET, 573 .tuner_addr = ADDR_UNSET, 574 }, 575 [BTTV_BOARD_WINVIEW_601] = { 576 .name = "Leadtek WinView 601", 577 .video_inputs = 3, 578 /* .audio_inputs= 1, */ 579 .svhs = 2, 580 .gpiomask = 0x8300f8, 581 .muxsel = MUXSEL(2, 3, 1, 1, 0), 582 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 }, 583 .gpiomute = 0xcfa007, 584 .tuner_type = UNSET, 585 .tuner_addr = ADDR_UNSET, 586 .volume_gpio = winview_volume, 587 .has_radio = 1, 588 }, 589 [BTTV_BOARD_AVEC_INTERCAP] = { 590 .name = "AVEC Intercapture", 591 .video_inputs = 3, 592 /* .audio_inputs= 2, */ 593 .svhs = 2, 594 .gpiomask = 0, 595 .muxsel = MUXSEL(2, 3, 1, 1), 596 .gpiomux = { 1, 0, 0, 0 }, 597 .tuner_type = UNSET, 598 .tuner_addr = ADDR_UNSET, 599 }, 600 [BTTV_BOARD_LIFE_FLYKIT] = { 601 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)", 602 .video_inputs = 4, 603 /* .audio_inputs= 1, */ 604 .svhs = NO_SVHS, 605 .gpiomask = 0x8dff00, 606 .muxsel = MUXSEL(2, 3, 1, 1), 607 .gpiomux = { 0 }, 608 .no_msp34xx = 1, 609 .tuner_type = TUNER_ABSENT, 610 .tuner_addr = ADDR_UNSET, 611 }, 612 613 /* ---- card 0x14 ---------------------------------- */ 614 [BTTV_BOARD_CEI_RAFFLES] = { 615 .name = "CEI Raffles Card", 616 .video_inputs = 3, 617 /* .audio_inputs= 3, */ 618 .svhs = 2, 619 .muxsel = MUXSEL(2, 3, 1, 1), 620 .tuner_type = UNSET, 621 .tuner_addr = ADDR_UNSET, 622 }, 623 [BTTV_BOARD_CONFERENCETV] = { 624 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50", 625 .video_inputs = 4, 626 /* .audio_inputs= 2, tuner, line in */ 627 .svhs = 2, 628 .gpiomask = 0x1800, 629 .muxsel = MUXSEL(2, 3, 1, 1), 630 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 631 .gpiomute = 0x1800, 632 .pll = PLL_28, 633 .tuner_type = TUNER_PHILIPS_PAL_I, 634 .tuner_addr = ADDR_UNSET, 635 }, 636 [BTTV_BOARD_PHOEBE_TVMAS] = { 637 .name = "Askey CPH050/ Phoebe Tv Master + FM", 638 .video_inputs = 3, 639 /* .audio_inputs= 1, */ 640 .svhs = 2, 641 .gpiomask = 0xc00, 642 .muxsel = MUXSEL(2, 3, 1, 1), 643 .gpiomux = { 0, 1, 0x800, 0x400 }, 644 .gpiomute = 0xc00, 645 .pll = PLL_28, 646 .tuner_type = UNSET, 647 .tuner_addr = ADDR_UNSET, 648 }, 649 [BTTV_BOARD_MODTEC_205] = { 650 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878", 651 .video_inputs = 3, 652 /* .audio_inputs= 1, */ 653 .svhs = NO_SVHS, 654 .has_dig_in = 1, 655 .gpiomask = 7, 656 .muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */ 657 /* .digital_mode= DIGITAL_MODE_CAMERA, */ 658 .gpiomux = { 0, 0, 0, 0 }, 659 .no_msp34xx = 1, 660 .pll = PLL_28, 661 .tuner_type = TUNER_ALPS_TSBB5_PAL_I, 662 .tuner_addr = ADDR_UNSET, 663 }, 664 665 /* ---- card 0x18 ---------------------------------- */ 666 [BTTV_BOARD_MAGICTVIEW061] = { 667 .name = "Askey CPH05X/06X (bt878) [many vendors]", 668 .video_inputs = 3, 669 /* .audio_inputs= 1, */ 670 .svhs = 2, 671 .gpiomask = 0xe00, 672 .muxsel = MUXSEL(2, 3, 1, 1), 673 .gpiomux = {0x400, 0x400, 0x400, 0x400 }, 674 .gpiomute = 0xc00, 675 .pll = PLL_28, 676 .tuner_type = UNSET, 677 .tuner_addr = ADDR_UNSET, 678 .has_remote = 1, 679 .has_radio = 1, /* not every card has radio */ 680 }, 681 [BTTV_BOARD_VOBIS_BOOSTAR] = { 682 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar", 683 .video_inputs = 3, 684 /* .audio_inputs= 1, */ 685 .svhs = 2, 686 .gpiomask = 0x1f0fff, 687 .muxsel = MUXSEL(2, 3, 1, 1), 688 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, 689 .gpiomute = 0x40000, 690 .tuner_type = TUNER_PHILIPS_PAL, 691 .tuner_addr = ADDR_UNSET, 692 .audio_mode_gpio= terratv_audio, 693 }, 694 [BTTV_BOARD_HAUPPAUG_WCAM] = { 695 .name = "Hauppauge WinCam newer (bt878)", 696 .video_inputs = 4, 697 /* .audio_inputs= 1, */ 698 .svhs = 3, 699 .gpiomask = 7, 700 .muxsel = MUXSEL(2, 0, 1, 1), 701 .gpiomux = { 0, 1, 2, 3 }, 702 .gpiomute = 4, 703 .tuner_type = UNSET, 704 .tuner_addr = ADDR_UNSET, 705 }, 706 [BTTV_BOARD_MAXI] = { 707 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50", 708 .video_inputs = 4, 709 /* .audio_inputs= 2, */ 710 .svhs = 2, 711 .gpiomask = 0x1800, 712 .muxsel = MUXSEL(2, 3, 1, 1), 713 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 714 .gpiomute = 0x1800, 715 .pll = PLL_28, 716 .tuner_type = TUNER_PHILIPS_SECAM, 717 .tuner_addr = ADDR_UNSET, 718 }, 719 720 /* ---- card 0x1c ---------------------------------- */ 721 [BTTV_BOARD_TERRATV] = { 722 .name = "Terratec TerraTV+ Version 1.1 (bt878)", 723 .video_inputs = 3, 724 /* .audio_inputs= 1, */ 725 .svhs = 2, 726 .gpiomask = 0x1f0fff, 727 .muxsel = MUXSEL(2, 3, 1, 1), 728 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 }, 729 .gpiomute = 0x40000, 730 .tuner_type = TUNER_PHILIPS_PAL, 731 .tuner_addr = ADDR_UNSET, 732 .audio_mode_gpio= terratv_audio, 733 /* GPIO wiring: 734 External 20 pin connector (for Active Radio Upgrade board) 735 gpio00: i2c-sda 736 gpio01: i2c-scl 737 gpio02: om5610-data 738 gpio03: om5610-clk 739 gpio04: om5610-wre 740 gpio05: om5610-stereo 741 gpio06: rds6588-davn 742 gpio07: Pin 7 n.c. 743 gpio08: nIOW 744 gpio09+10: nIOR, nSEL ?? (bt878) 745 gpio09: nIOR (bt848) 746 gpio10: nSEL (bt848) 747 Sound Routing: 748 gpio16: u2-A0 (1st 4052bt) 749 gpio17: u2-A1 750 gpio18: u2-nEN 751 gpio19: u4-A0 (2nd 4052) 752 gpio20: u4-A1 753 u4-nEN - GND 754 Btspy: 755 00000 : Cdrom (internal audio input) 756 10000 : ext. Video audio input 757 20000 : TV Mono 758 a0000 : TV Mono/2 759 1a0000 : TV Stereo 760 30000 : Radio 761 40000 : Mute 762 */ 763 764 }, 765 [BTTV_BOARD_PXC200] = { 766 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */ 767 .name = "Imagenation PXC200", 768 .video_inputs = 5, 769 /* .audio_inputs= 1, */ 770 .svhs = 1, /* was: 4 */ 771 .gpiomask = 0, 772 .muxsel = MUXSEL(2, 3, 1, 0, 0), 773 .gpiomux = { 0 }, 774 .tuner_type = TUNER_ABSENT, 775 .tuner_addr = ADDR_UNSET, 776 .muxsel_hook = PXC200_muxsel, 777 778 }, 779 [BTTV_BOARD_FLYVIDEO_98] = { 780 .name = "Lifeview FlyVideo 98 LR50", 781 .video_inputs = 4, 782 /* .audio_inputs= 1, */ 783 .svhs = 2, 784 .gpiomask = 0x1800, /* 0x8dfe00 */ 785 .muxsel = MUXSEL(2, 3, 1, 1), 786 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 }, 787 .gpiomute = 0x1800, 788 .pll = PLL_28, 789 .tuner_type = UNSET, 790 .tuner_addr = ADDR_UNSET, 791 }, 792 [BTTV_BOARD_IPROTV] = { 793 .name = "Formac iProTV, Formac ProTV I (bt848)", 794 .video_inputs = 4, 795 /* .audio_inputs= 1, */ 796 .svhs = 3, 797 .gpiomask = 1, 798 .muxsel = MUXSEL(2, 3, 1, 1), 799 .gpiomux = { 1, 0, 0, 0 }, 800 .pll = PLL_28, 801 .tuner_type = TUNER_PHILIPS_PAL, 802 .tuner_addr = ADDR_UNSET, 803 }, 804 805 /* ---- card 0x20 ---------------------------------- */ 806 [BTTV_BOARD_INTEL_C_S_PCI] = { 807 .name = "Intel Create and Share PCI/ Smart Video Recorder III", 808 .video_inputs = 4, 809 /* .audio_inputs= 0, */ 810 .svhs = 2, 811 .gpiomask = 0, 812 .muxsel = MUXSEL(2, 3, 1, 1), 813 .gpiomux = { 0 }, 814 .tuner_type = TUNER_ABSENT, 815 .tuner_addr = ADDR_UNSET, 816 }, 817 [BTTV_BOARD_TERRATVALUE] = { 818 .name = "Terratec TerraTValue Version Bt878", 819 .video_inputs = 3, 820 /* .audio_inputs= 1, */ 821 .svhs = 2, 822 .gpiomask = 0xffff00, 823 .muxsel = MUXSEL(2, 3, 1, 1), 824 .gpiomux = { 0x500, 0, 0x300, 0x900 }, 825 .gpiomute = 0x900, 826 .pll = PLL_28, 827 .tuner_type = TUNER_PHILIPS_PAL, 828 .tuner_addr = ADDR_UNSET, 829 }, 830 [BTTV_BOARD_WINFAST2000] = { 831 .name = "Leadtek WinFast 2000/ WinFast 2000 XP", 832 .video_inputs = 4, 833 /* .audio_inputs= 1, */ 834 .svhs = 2, 835 /* TV, CVid, SVid, CVid over SVid connector */ 836 .muxsel = MUXSEL(2, 3, 1, 1, 0), 837 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */ 838 .gpiomask = 0xb33000, 839 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 }, 840 .gpiomute = 0x800000, 841 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !) 842 gpio23 -- hef4052:nEnable (0x800000) 843 gpio12 -- hef4052:A1 844 gpio13 -- hef4052:A0 845 0x0000: external audio 846 0x1000: FM 847 0x2000: TV 848 0x3000: n.c. 849 Note: There exists another variant "Winfast 2000" with tv stereo !? 850 Note: eeprom only contains FF and pci subsystem id 107d:6606 851 */ 852 .pll = PLL_28, 853 .has_radio = 1, 854 .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */ 855 .tuner_addr = ADDR_UNSET, 856 .audio_mode_gpio= winfast2000_audio, 857 .has_remote = 1, 858 }, 859 [BTTV_BOARD_CHRONOS_VS2] = { 860 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II", 861 .video_inputs = 4, 862 /* .audio_inputs= 3, */ 863 .svhs = 2, 864 .gpiomask = 0x1800, 865 .muxsel = MUXSEL(2, 3, 1, 1), 866 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 867 .gpiomute = 0x1800, 868 .pll = PLL_28, 869 .tuner_type = UNSET, 870 .tuner_addr = ADDR_UNSET, 871 }, 872 873 /* ---- card 0x24 ---------------------------------- */ 874 [BTTV_BOARD_TYPHOON_TVIEW] = { 875 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner", 876 .video_inputs = 4, 877 /* .audio_inputs= 3, */ 878 .svhs = 2, 879 .gpiomask = 0x1800, 880 .muxsel = MUXSEL(2, 3, 1, 1), 881 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 882 .gpiomute = 0x1800, 883 .pll = PLL_28, 884 .tuner_type = UNSET, 885 .tuner_addr = ADDR_UNSET, 886 .has_radio = 1, 887 }, 888 [BTTV_BOARD_PXELVWPLTVPRO] = { 889 .name = "Prolink PixelView PlayTV pro", 890 .video_inputs = 3, 891 /* .audio_inputs= 1, */ 892 .svhs = 2, 893 .gpiomask = 0xff, 894 .muxsel = MUXSEL(2, 3, 1, 1), 895 .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, 896 .gpiomute = 0x29, 897 .no_msp34xx = 1, 898 .pll = PLL_28, 899 .tuner_type = UNSET, 900 .tuner_addr = ADDR_UNSET, 901 }, 902 [BTTV_BOARD_MAGICTVIEW063] = { 903 .name = "Askey CPH06X TView99", 904 .video_inputs = 4, 905 /* .audio_inputs= 1, */ 906 .svhs = 2, 907 .gpiomask = 0x551e00, 908 .muxsel = MUXSEL(2, 3, 1, 0), 909 .gpiomux = { 0x551400, 0x551200, 0, 0 }, 910 .gpiomute = 0x551c00, 911 .pll = PLL_28, 912 .tuner_type = TUNER_PHILIPS_PAL_I, 913 .tuner_addr = ADDR_UNSET, 914 .has_remote = 1, 915 }, 916 [BTTV_BOARD_PINNACLE] = { 917 .name = "Pinnacle PCTV Studio/Rave", 918 .video_inputs = 3, 919 /* .audio_inputs= 1, */ 920 .svhs = 2, 921 .gpiomask = 0x03000F, 922 .muxsel = MUXSEL(2, 3, 1, 1), 923 .gpiomux = { 2, 0xd0001, 0, 0 }, 924 .gpiomute = 1, 925 .pll = PLL_28, 926 .tuner_type = UNSET, 927 .tuner_addr = ADDR_UNSET, 928 }, 929 930 /* ---- card 0x28 ---------------------------------- */ 931 [BTTV_BOARD_STB2] = { 932 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100", 933 .video_inputs = 3, 934 /* .audio_inputs= 1, */ 935 .svhs = 2, 936 .gpiomask = 7, 937 .muxsel = MUXSEL(2, 3, 1, 1), 938 .gpiomux = { 4, 0, 2, 3 }, 939 .gpiomute = 1, 940 .no_msp34xx = 1, 941 .tuner_type = TUNER_PHILIPS_NTSC, 942 .tuner_addr = ADDR_UNSET, 943 .pll = PLL_28, 944 .has_radio = 1, 945 }, 946 [BTTV_BOARD_AVPHONE98] = { 947 .name = "AVerMedia TVPhone 98", 948 .video_inputs = 3, 949 /* .audio_inputs= 4, */ 950 .svhs = 2, 951 .gpiomask = 15, 952 .muxsel = MUXSEL(2, 3, 1, 1), 953 .gpiomux = { 13, 4, 11, 7 }, 954 .pll = PLL_28, 955 .tuner_type = UNSET, 956 .tuner_addr = ADDR_UNSET, 957 .has_radio = 1, 958 .audio_mode_gpio= avermedia_tvphone_audio, 959 }, 960 [BTTV_BOARD_PV951] = { 961 .name = "ProVideo PV951", /* pic16c54 */ 962 .video_inputs = 3, 963 /* .audio_inputs= 1, */ 964 .svhs = 2, 965 .gpiomask = 0, 966 .muxsel = MUXSEL(2, 3, 1, 1), 967 .gpiomux = { 0, 0, 0, 0}, 968 .no_msp34xx = 1, 969 .pll = PLL_28, 970 .tuner_type = TUNER_PHILIPS_PAL_I, 971 .tuner_addr = ADDR_UNSET, 972 }, 973 [BTTV_BOARD_ONAIR_TV] = { 974 .name = "Little OnAir TV", 975 .video_inputs = 3, 976 /* .audio_inputs= 1, */ 977 .svhs = 2, 978 .gpiomask = 0xe00b, 979 .muxsel = MUXSEL(2, 3, 1, 1), 980 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 }, 981 .gpiomute = 0xff3ffc, 982 .no_msp34xx = 1, 983 .tuner_type = UNSET, 984 .tuner_addr = ADDR_UNSET, 985 }, 986 987 /* ---- card 0x2c ---------------------------------- */ 988 [BTTV_BOARD_SIGMA_TVII_FM] = { 989 .name = "Sigma TVII-FM", 990 .video_inputs = 2, 991 /* .audio_inputs= 1, */ 992 .svhs = NO_SVHS, 993 .gpiomask = 3, 994 .muxsel = MUXSEL(2, 3, 1, 1), 995 .gpiomux = { 1, 1, 0, 2 }, 996 .gpiomute = 3, 997 .no_msp34xx = 1, 998 .pll = PLL_NONE, 999 .tuner_type = UNSET, 1000 .tuner_addr = ADDR_UNSET, 1001 }, 1002 [BTTV_BOARD_MATRIX_VISION2] = { 1003 .name = "MATRIX-Vision MV-Delta 2", 1004 .video_inputs = 5, 1005 /* .audio_inputs= 1, */ 1006 .svhs = 3, 1007 .gpiomask = 0, 1008 .muxsel = MUXSEL(2, 3, 1, 0, 0), 1009 .gpiomux = { 0 }, 1010 .no_msp34xx = 1, 1011 .pll = PLL_28, 1012 .tuner_type = TUNER_ABSENT, 1013 .tuner_addr = ADDR_UNSET, 1014 }, 1015 [BTTV_BOARD_ZOLTRIX_GENIE] = { 1016 .name = "Zoltrix Genie TV/FM", 1017 .video_inputs = 3, 1018 /* .audio_inputs= 1, */ 1019 .svhs = 2, 1020 .gpiomask = 0xbcf03f, 1021 .muxsel = MUXSEL(2, 3, 1, 1), 1022 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 }, 1023 .gpiomute = 0xbcb03f, 1024 .no_msp34xx = 1, 1025 .pll = PLL_28, 1026 .tuner_type = TUNER_TEMIC_4039FR5_NTSC, 1027 .tuner_addr = ADDR_UNSET, 1028 }, 1029 [BTTV_BOARD_TERRATVRADIO] = { 1030 .name = "Terratec TV/Radio+", 1031 .video_inputs = 3, 1032 /* .audio_inputs= 1, */ 1033 .svhs = 2, 1034 .gpiomask = 0x70000, 1035 .muxsel = MUXSEL(2, 3, 1, 1), 1036 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, 1037 .gpiomute = 0x40000, 1038 .no_msp34xx = 1, 1039 .pll = PLL_35, 1040 .tuner_type = TUNER_PHILIPS_PAL_I, 1041 .tuner_addr = ADDR_UNSET, 1042 .has_radio = 1, 1043 }, 1044 1045 /* ---- card 0x30 ---------------------------------- */ 1046 [BTTV_BOARD_DYNALINK] = { 1047 .name = "Askey CPH03x/ Dynalink Magic TView", 1048 .video_inputs = 3, 1049 /* .audio_inputs= 1, */ 1050 .svhs = 2, 1051 .gpiomask = 15, 1052 .muxsel = MUXSEL(2, 3, 1, 1), 1053 .gpiomux = {2,0,0,0 }, 1054 .gpiomute = 1, 1055 .pll = PLL_28, 1056 .tuner_type = UNSET, 1057 .tuner_addr = ADDR_UNSET, 1058 }, 1059 [BTTV_BOARD_GVBCTV3PCI] = { 1060 .name = "IODATA GV-BCTV3/PCI", 1061 .video_inputs = 3, 1062 /* .audio_inputs= 1, */ 1063 .svhs = 2, 1064 .gpiomask = 0x010f00, 1065 .muxsel = MUXSEL(2, 3, 0, 0), 1066 .gpiomux = {0x10000, 0, 0x10000, 0 }, 1067 .no_msp34xx = 1, 1068 .pll = PLL_28, 1069 .tuner_type = TUNER_ALPS_TSHC6_NTSC, 1070 .tuner_addr = ADDR_UNSET, 1071 .audio_mode_gpio= gvbctv3pci_audio, 1072 }, 1073 [BTTV_BOARD_PXELVWPLTVPAK] = { 1074 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP", 1075 .video_inputs = 5, 1076 /* .audio_inputs= 1, */ 1077 .svhs = 3, 1078 .has_dig_in = 1, 1079 .gpiomask = 0xAA0000, 1080 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */ 1081 /* .digital_mode= DIGITAL_MODE_CAMERA, */ 1082 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 }, 1083 .gpiomute = 0xa8000, 1084 .no_msp34xx = 1, 1085 .pll = PLL_28, 1086 .tuner_type = TUNER_PHILIPS_PAL_I, 1087 .tuner_addr = ADDR_UNSET, 1088 .has_remote = 1, 1089 /* GPIO wiring: (different from Rev.4C !) 1090 GPIO17: U4.A0 (first hef4052bt) 1091 GPIO19: U4.A1 1092 GPIO20: U5.A1 (second hef4052bt) 1093 GPIO21: U4.nEN 1094 GPIO22: BT832 Reset Line 1095 GPIO23: A5,A0, U5,nEN 1096 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22 1097 */ 1098 }, 1099 [BTTV_BOARD_EAGLE] = { 1100 .name = "Eagle Wireless Capricorn2 (bt878A)", 1101 .video_inputs = 4, 1102 /* .audio_inputs= 1, */ 1103 .svhs = 2, 1104 .gpiomask = 7, 1105 .muxsel = MUXSEL(2, 0, 1, 1), 1106 .gpiomux = { 0, 1, 2, 3 }, 1107 .gpiomute = 4, 1108 .pll = PLL_28, 1109 .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */, 1110 .tuner_addr = ADDR_UNSET, 1111 }, 1112 1113 /* ---- card 0x34 ---------------------------------- */ 1114 [BTTV_BOARD_PINNACLEPRO] = { 1115 /* David Härdeman <david@2gen.com> */ 1116 .name = "Pinnacle PCTV Studio Pro", 1117 .video_inputs = 4, 1118 /* .audio_inputs= 1, */ 1119 .svhs = 3, 1120 .gpiomask = 0x03000F, 1121 .muxsel = MUXSEL(2, 3, 1, 1), 1122 .gpiomux = { 1, 0xd0001, 0, 0 }, 1123 .gpiomute = 10, 1124 /* sound path (5 sources): 1125 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable) 1126 0= ext. Audio IN 1127 1= from MUX2 1128 2= Mono TV sound from Tuner 1129 3= not connected 1130 MUX2 (mask 0x30000): 1131 0,2,3= from MSP34xx 1132 1= FM stereo Radio from Tuner */ 1133 .pll = PLL_28, 1134 .tuner_type = UNSET, 1135 .tuner_addr = ADDR_UNSET, 1136 }, 1137 [BTTV_BOARD_TVIEW_RDS_FM] = { 1138 /* Claas Langbehn <claas@bigfoot.com>, 1139 Sven Grothklags <sven@upb.de> */ 1140 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS", 1141 .video_inputs = 4, 1142 /* .audio_inputs= 3, */ 1143 .svhs = 2, 1144 .gpiomask = 0x1c, 1145 .muxsel = MUXSEL(2, 3, 1, 1), 1146 .gpiomux = { 0, 0, 0x10, 8 }, 1147 .gpiomute = 4, 1148 .pll = PLL_28, 1149 .tuner_type = TUNER_PHILIPS_PAL, 1150 .tuner_addr = ADDR_UNSET, 1151 .has_radio = 1, 1152 }, 1153 [BTTV_BOARD_LIFETEC_9415] = { 1154 /* Tim Röstermundt <rosterm@uni-muenster.de> 1155 in de.comp.os.unix.linux.hardware: 1156 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0 1157 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff 1158 options tuner type=5 */ 1159 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]", 1160 .video_inputs = 4, 1161 /* .audio_inputs= 1, */ 1162 .svhs = 2, 1163 .gpiomask = 0x18e0, 1164 .muxsel = MUXSEL(2, 3, 1, 1), 1165 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, 1166 .gpiomute = 0x18e0, 1167 /* For cards with tda9820/tda9821: 1168 0x0000: Tuner normal stereo 1169 0x0080: Tuner A2 SAP (second audio program = Zweikanalton) 1170 0x0880: Tuner A2 stereo */ 1171 .pll = PLL_28, 1172 .tuner_type = UNSET, 1173 .tuner_addr = ADDR_UNSET, 1174 }, 1175 [BTTV_BOARD_BESTBUY_EASYTV] = { 1176 /* Miguel Angel Alvarez <maacruz@navegalia.com> 1177 old Easy TV BT848 version (model CPH031) */ 1178 .name = "Askey CPH031/ BESTBUY Easy TV", 1179 .video_inputs = 4, 1180 /* .audio_inputs= 1, */ 1181 .svhs = 2, 1182 .gpiomask = 0xF, 1183 .muxsel = MUXSEL(2, 3, 1, 0), 1184 .gpiomux = { 2, 0, 0, 0 }, 1185 .gpiomute = 10, 1186 .pll = PLL_28, 1187 .tuner_type = TUNER_TEMIC_PAL, 1188 .tuner_addr = ADDR_UNSET, 1189 }, 1190 1191 /* ---- card 0x38 ---------------------------------- */ 1192 [BTTV_BOARD_FLYVIDEO_98FM] = { 1193 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */ 1194 .name = "Lifeview FlyVideo 98FM LR50", 1195 .video_inputs = 4, 1196 /* .audio_inputs= 3, */ 1197 .svhs = 2, 1198 .gpiomask = 0x1800, 1199 .muxsel = MUXSEL(2, 3, 1, 1), 1200 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 1201 .gpiomute = 0x1800, 1202 .pll = PLL_28, 1203 .tuner_type = TUNER_PHILIPS_PAL, 1204 .tuner_addr = ADDR_UNSET, 1205 }, 1206 /* This is the ultimate cheapo capture card 1207 * just a BT848A on a small PCB! 1208 * Steve Hosgood <steve@equiinet.com> */ 1209 [BTTV_BOARD_GRANDTEC] = { 1210 .name = "GrandTec 'Grand Video Capture' (Bt848)", 1211 .video_inputs = 2, 1212 /* .audio_inputs= 0, */ 1213 .svhs = 1, 1214 .gpiomask = 0, 1215 .muxsel = MUXSEL(3, 1), 1216 .gpiomux = { 0 }, 1217 .no_msp34xx = 1, 1218 .pll = PLL_35, 1219 .tuner_type = TUNER_ABSENT, 1220 .tuner_addr = ADDR_UNSET, 1221 }, 1222 [BTTV_BOARD_ASKEY_CPH060] = { 1223 /* Daniel Herrington <daniel.herrington@home.com> */ 1224 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)", 1225 .video_inputs = 3, 1226 /* .audio_inputs= 1, */ 1227 .svhs = 2, 1228 .gpiomask = 0xe00, 1229 .muxsel = MUXSEL(2, 3, 1, 1), 1230 .gpiomux = { 0x400, 0x400, 0x400, 0x400 }, 1231 .gpiomute = 0x800, 1232 .pll = PLL_28, 1233 .tuner_type = TUNER_TEMIC_4036FY5_NTSC, 1234 .tuner_addr = ADDR_UNSET, 1235 }, 1236 [BTTV_BOARD_ASKEY_CPH03X] = { 1237 /* Matti Mottus <mottus@physic.ut.ee> */ 1238 .name = "Askey CPH03x TV Capturer", 1239 .video_inputs = 4, 1240 /* .audio_inputs= 1, */ 1241 .svhs = 2, 1242 .gpiomask = 0x03000F, 1243 .muxsel = MUXSEL(2, 3, 1, 0), 1244 .gpiomux = { 2, 0, 0, 0 }, 1245 .gpiomute = 1, 1246 .pll = PLL_28, 1247 .tuner_type = TUNER_TEMIC_PAL, 1248 .tuner_addr = ADDR_UNSET, 1249 .has_remote = 1, 1250 }, 1251 1252 /* ---- card 0x3c ---------------------------------- */ 1253 [BTTV_BOARD_MM100PCTV] = { 1254 /* Philip Blundell <philb@gnu.org> */ 1255 .name = "Modular Technology MM100PCTV", 1256 .video_inputs = 2, 1257 /* .audio_inputs= 2, */ 1258 .svhs = NO_SVHS, 1259 .gpiomask = 11, 1260 .muxsel = MUXSEL(2, 3, 1, 1), 1261 .gpiomux = { 2, 0, 0, 1 }, 1262 .gpiomute = 8, 1263 .pll = PLL_35, 1264 .tuner_type = TUNER_TEMIC_PAL, 1265 .tuner_addr = ADDR_UNSET, 1266 }, 1267 [BTTV_BOARD_GMV1] = { 1268 /* Adrian Cox <adrian@humboldt.co.uk */ 1269 .name = "AG Electronics GMV1", 1270 .video_inputs = 2, 1271 /* .audio_inputs= 0, */ 1272 .svhs = 1, 1273 .gpiomask = 0xF, 1274 .muxsel = MUXSEL(2, 2), 1275 .gpiomux = { }, 1276 .no_msp34xx = 1, 1277 .pll = PLL_28, 1278 .tuner_type = TUNER_ABSENT, 1279 .tuner_addr = ADDR_UNSET, 1280 }, 1281 [BTTV_BOARD_BESTBUY_EASYTV2] = { 1282 /* Miguel Angel Alvarez <maacruz@navegalia.com> 1283 new Easy TV BT878 version (model CPH061) 1284 special thanks to Informatica Mieres for providing the card */ 1285 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)", 1286 .video_inputs = 3, 1287 /* .audio_inputs= 2, */ 1288 .svhs = 2, 1289 .gpiomask = 0xFF, 1290 .muxsel = MUXSEL(2, 3, 1, 0), 1291 .gpiomux = { 1, 0, 4, 4 }, 1292 .gpiomute = 9, 1293 .pll = PLL_28, 1294 .tuner_type = TUNER_PHILIPS_PAL, 1295 .tuner_addr = ADDR_UNSET, 1296 }, 1297 [BTTV_BOARD_ATI_TVWONDER] = { 1298 /* Lukas Gebauer <geby@volny.cz> */ 1299 .name = "ATI TV-Wonder", 1300 .video_inputs = 3, 1301 /* .audio_inputs= 1, */ 1302 .svhs = 2, 1303 .gpiomask = 0xf03f, 1304 .muxsel = MUXSEL(2, 3, 1, 0), 1305 .gpiomux = { 0xbffe, 0, 0xbfff, 0 }, 1306 .gpiomute = 0xbffe, 1307 .pll = PLL_28, 1308 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, 1309 .tuner_addr = ADDR_UNSET, 1310 }, 1311 1312 /* ---- card 0x40 ---------------------------------- */ 1313 [BTTV_BOARD_ATI_TVWONDERVE] = { 1314 /* Lukas Gebauer <geby@volny.cz> */ 1315 .name = "ATI TV-Wonder VE", 1316 .video_inputs = 2, 1317 /* .audio_inputs= 1, */ 1318 .svhs = NO_SVHS, 1319 .gpiomask = 1, 1320 .muxsel = MUXSEL(2, 3, 0, 1), 1321 .gpiomux = { 0, 0, 1, 0 }, 1322 .no_msp34xx = 1, 1323 .pll = PLL_28, 1324 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, 1325 .tuner_addr = ADDR_UNSET, 1326 }, 1327 [BTTV_BOARD_FLYVIDEO2000] = { 1328 /* DeeJay <deejay@westel900.net (2000S) */ 1329 .name = "Lifeview FlyVideo 2000S LR90", 1330 .video_inputs = 3, 1331 /* .audio_inputs= 3, */ 1332 .svhs = 2, 1333 .gpiomask = 0x18e0, 1334 .muxsel = MUXSEL(2, 3, 0, 1), 1335 /* Radio changed from 1e80 to 0x800 to make 1336 FlyVideo2000S in .hu happy (gm)*/ 1337 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */ 1338 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, 1339 .gpiomute = 0x1800, 1340 .audio_mode_gpio= fv2000s_audio, 1341 .no_msp34xx = 1, 1342 .pll = PLL_28, 1343 .tuner_type = TUNER_PHILIPS_PAL, 1344 .tuner_addr = ADDR_UNSET, 1345 }, 1346 [BTTV_BOARD_TERRATVALUER] = { 1347 .name = "Terratec TValueRadio", 1348 .video_inputs = 3, 1349 /* .audio_inputs= 1, */ 1350 .svhs = 2, 1351 .gpiomask = 0xffff00, 1352 .muxsel = MUXSEL(2, 3, 1, 1), 1353 .gpiomux = { 0x500, 0x500, 0x300, 0x900 }, 1354 .gpiomute = 0x900, 1355 .pll = PLL_28, 1356 .tuner_type = TUNER_PHILIPS_PAL, 1357 .tuner_addr = ADDR_UNSET, 1358 .has_radio = 1, 1359 }, 1360 [BTTV_BOARD_GVBCTV4PCI] = { 1361 /* TANAKA Kei <peg00625@nifty.com> */ 1362 .name = "IODATA GV-BCTV4/PCI", 1363 .video_inputs = 3, 1364 /* .audio_inputs= 1, */ 1365 .svhs = 2, 1366 .gpiomask = 0x010f00, 1367 .muxsel = MUXSEL(2, 3, 0, 0), 1368 .gpiomux = {0x10000, 0, 0x10000, 0 }, 1369 .no_msp34xx = 1, 1370 .pll = PLL_28, 1371 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC, 1372 .tuner_addr = ADDR_UNSET, 1373 .audio_mode_gpio= gvbctv3pci_audio, 1374 }, 1375 1376 /* ---- card 0x44 ---------------------------------- */ 1377 [BTTV_BOARD_VOODOOTV_FM] = { 1378 .name = "3Dfx VoodooTV FM (Euro)", 1379 /* try "insmod msp3400 simple=0" if you have 1380 * sound problems with this card. */ 1381 .video_inputs = 4, 1382 /* .audio_inputs= 1, */ 1383 .svhs = NO_SVHS, 1384 .gpiomask = 0x4f8a00, 1385 /* 0x100000: 1=MSP enabled (0=disable again) 1386 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ 1387 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, 1388 .gpiomute = 0x947fff, 1389 /* tvtuner, radio, external,internal, mute, stereo 1390 * tuner, Composit, SVid, Composit-on-Svid-adapter */ 1391 .muxsel = MUXSEL(2, 3, 0, 1), 1392 .tuner_type = TUNER_MT2032, 1393 .tuner_addr = ADDR_UNSET, 1394 .pll = PLL_28, 1395 .has_radio = 1, 1396 }, 1397 [BTTV_BOARD_VOODOOTV_200] = { 1398 .name = "VoodooTV 200 (USA)", 1399 /* try "insmod msp3400 simple=0" if you have 1400 * sound problems with this card. */ 1401 .video_inputs = 4, 1402 /* .audio_inputs= 1, */ 1403 .svhs = NO_SVHS, 1404 .gpiomask = 0x4f8a00, 1405 /* 0x100000: 1=MSP enabled (0=disable again) 1406 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ 1407 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, 1408 .gpiomute = 0x947fff, 1409 /* tvtuner, radio, external,internal, mute, stereo 1410 * tuner, Composit, SVid, Composit-on-Svid-adapter */ 1411 .muxsel = MUXSEL(2, 3, 0, 1), 1412 .tuner_type = TUNER_MT2032, 1413 .tuner_addr = ADDR_UNSET, 1414 .pll = PLL_28, 1415 .has_radio = 1, 1416 }, 1417 [BTTV_BOARD_AIMMS] = { 1418 /* Philip Blundell <pb@nexus.co.uk> */ 1419 .name = "Active Imaging AIMMS", 1420 .video_inputs = 1, 1421 /* .audio_inputs= 0, */ 1422 .tuner_type = TUNER_ABSENT, 1423 .tuner_addr = ADDR_UNSET, 1424 .pll = PLL_28, 1425 .muxsel = MUXSEL(2), 1426 .gpiomask = 0 1427 }, 1428 [BTTV_BOARD_PV_BT878P_PLUS] = { 1429 /* Tomasz Pyra <hellfire@sedez.iq.pl> */ 1430 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)", 1431 .video_inputs = 3, 1432 /* .audio_inputs= 4, */ 1433 .svhs = 2, 1434 .gpiomask = 15, 1435 .muxsel = MUXSEL(2, 3, 1, 1), 1436 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */ 1437 .gpiomute = 13, 1438 .pll = PLL_28, 1439 .tuner_type = TUNER_LG_PAL_I_FM, 1440 .tuner_addr = ADDR_UNSET, 1441 .has_remote = 1, 1442 /* GPIO wiring: 1443 GPIO0: U4.A0 (hef4052bt) 1444 GPIO1: U4.A1 1445 GPIO2: U4.A1 (second hef4052bt) 1446 GPIO3: U4.nEN, U5.A0, A5.nEN 1447 GPIO8-15: vrd866b ? 1448 */ 1449 }, 1450 [BTTV_BOARD_FLYVIDEO98EZ] = { 1451 .name = "Lifeview FlyVideo 98EZ (capture only) LR51", 1452 .video_inputs = 4, 1453 /* .audio_inputs= 0, */ 1454 .svhs = 2, 1455 /* AV1, AV2, SVHS, CVid adapter on SVHS */ 1456 .muxsel = MUXSEL(2, 3, 1, 1), 1457 .pll = PLL_28, 1458 .no_msp34xx = 1, 1459 .tuner_type = TUNER_ABSENT, 1460 .tuner_addr = ADDR_UNSET, 1461 }, 1462 1463 /* ---- card 0x48 ---------------------------------- */ 1464 [BTTV_BOARD_PV_BT878P_9B] = { 1465 /* Dariusz Kowalewski <darekk@automex.pl> */ 1466 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)", 1467 .video_inputs = 4, 1468 /* .audio_inputs= 1, */ 1469 .svhs = 2, 1470 .gpiomask = 0x3f, 1471 .muxsel = MUXSEL(2, 3, 1, 1), 1472 .gpiomux = { 0x01, 0x00, 0x03, 0x03 }, 1473 .gpiomute = 0x09, 1474 .no_msp34xx = 1, 1475 .pll = PLL_28, 1476 .tuner_type = TUNER_PHILIPS_PAL, 1477 .tuner_addr = ADDR_UNSET, 1478 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */ 1479 .has_radio = 1, /* Note: not all cards have radio */ 1480 .has_remote = 1, 1481 /* GPIO wiring: 1482 GPIO0: A0 hef4052 1483 GPIO1: A1 hef4052 1484 GPIO3: nEN hef4052 1485 GPIO8-15: vrd866b 1486 GPIO20,22,23: R30,R29,R28 1487 */ 1488 }, 1489 [BTTV_BOARD_SENSORAY311_611] = { 1490 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */ 1491 /* you must jumper JP5 for the 311 card (PC/104+) to work */ 1492 .name = "Sensoray 311/611", 1493 .video_inputs = 5, 1494 /* .audio_inputs= 0, */ 1495 .svhs = 4, 1496 .gpiomask = 0, 1497 .muxsel = MUXSEL(2, 3, 1, 0, 0), 1498 .gpiomux = { 0 }, 1499 .tuner_type = TUNER_ABSENT, 1500 .tuner_addr = ADDR_UNSET, 1501 }, 1502 [BTTV_BOARD_RV605] = { 1503 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */ 1504 .name = "RemoteVision MX (RV605)", 1505 .video_inputs = 16, 1506 /* .audio_inputs= 0, */ 1507 .svhs = NO_SVHS, 1508 .gpiomask = 0x00, 1509 .gpiomask2 = 0x07ff, 1510 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), 1511 .no_msp34xx = 1, 1512 .tuner_type = TUNER_ABSENT, 1513 .tuner_addr = ADDR_UNSET, 1514 .muxsel_hook = rv605_muxsel, 1515 }, 1516 [BTTV_BOARD_POWERCLR_MTV878] = { 1517 .name = "Powercolor MTV878/ MTV878R/ MTV878F", 1518 .video_inputs = 3, 1519 /* .audio_inputs= 2, */ 1520 .svhs = 2, 1521 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */ 1522 .muxsel = MUXSEL(2, 1, 1), 1523 .gpiomux = { 0, 1, 2, 2 }, 1524 .gpiomute = 4, 1525 .tuner_type = TUNER_PHILIPS_PAL, 1526 .tuner_addr = ADDR_UNSET, 1527 .pll = PLL_28, 1528 .has_radio = 1, 1529 }, 1530 1531 /* ---- card 0x4c ---------------------------------- */ 1532 [BTTV_BOARD_WINDVR] = { 1533 /* Masaki Suzuki <masaki@btree.org> */ 1534 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)", 1535 .video_inputs = 3, 1536 /* .audio_inputs= 1, */ 1537 .svhs = 2, 1538 .gpiomask = 0x140007, 1539 .muxsel = MUXSEL(2, 3, 1, 1), 1540 .gpiomux = { 0, 1, 2, 3 }, 1541 .gpiomute = 4, 1542 .tuner_type = TUNER_PHILIPS_NTSC, 1543 .tuner_addr = ADDR_UNSET, 1544 .audio_mode_gpio= windvr_audio, 1545 }, 1546 [BTTV_BOARD_GRANDTEC_MULTI] = { 1547 .name = "GrandTec Multi Capture Card (Bt878)", 1548 .video_inputs = 4, 1549 /* .audio_inputs= 0, */ 1550 .svhs = NO_SVHS, 1551 .gpiomask = 0, 1552 .muxsel = MUXSEL(2, 3, 1, 0), 1553 .gpiomux = { 0 }, 1554 .no_msp34xx = 1, 1555 .pll = PLL_28, 1556 .tuner_type = TUNER_ABSENT, 1557 .tuner_addr = ADDR_UNSET, 1558 }, 1559 [BTTV_BOARD_KWORLD] = { 1560 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF", 1561 .video_inputs = 4, 1562 /* .audio_inputs= 3, */ 1563 .svhs = 2, 1564 .gpiomask = 7, 1565 /* Tuner, SVid, SVHS, SVid to SVHS connector */ 1566 .muxsel = MUXSEL(2, 3, 1, 1), 1567 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio! 1568 * This card lacks external Audio In, so we mute it on Ext. & Int. 1569 * The PCB can take a sbx1637/sbx1673, wiring unknown. 1570 * This card lacks PCI subsystem ID, sigh. 1571 * gpiomux =1: lower volume, 2+3: mute 1572 * btwincap uses 0x80000/0x80003 1573 */ 1574 .gpiomute = 4, 1575 .no_msp34xx = 1, 1576 .pll = PLL_28, 1577 .tuner_type = TUNER_PHILIPS_PAL, 1578 .tuner_addr = ADDR_UNSET, 1579 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and 1580 radio signal strength indicators work fine. */ 1581 .has_radio = 1, 1582 /* GPIO Info: 1583 GPIO0,1: HEF4052 A0,A1 1584 GPIO2: HEF4052 nENABLE 1585 GPIO3-7: n.c. 1586 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card] 1587 GPIO14,15: ?? 1588 GPIO16-21: n.c. 1589 GPIO22,23: ?? 1590 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/ 1591 }, 1592 [BTTV_BOARD_DSP_TCVIDEO] = { 1593 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */ 1594 .name = "DSP Design TCVIDEO", 1595 .video_inputs = 4, 1596 .svhs = NO_SVHS, 1597 .muxsel = MUXSEL(2, 3, 1, 0), 1598 .pll = PLL_28, 1599 .tuner_type = UNSET, 1600 .tuner_addr = ADDR_UNSET, 1601 }, 1602 1603 /* ---- card 0x50 ---------------------------------- */ 1604 [BTTV_BOARD_HAUPPAUGEPVR] = { 1605 .name = "Hauppauge WinTV PVR", 1606 .video_inputs = 4, 1607 /* .audio_inputs= 1, */ 1608 .svhs = 2, 1609 .muxsel = MUXSEL(2, 0, 1, 1), 1610 .pll = PLL_28, 1611 .tuner_type = UNSET, 1612 .tuner_addr = ADDR_UNSET, 1613 1614 .gpiomask = 7, 1615 .gpiomux = {7}, 1616 }, 1617 [BTTV_BOARD_GVBCTV5PCI] = { 1618 .name = "IODATA GV-BCTV5/PCI", 1619 .video_inputs = 3, 1620 /* .audio_inputs= 1, */ 1621 .svhs = 2, 1622 .gpiomask = 0x0f0f80, 1623 .muxsel = MUXSEL(2, 3, 1, 0), 1624 .gpiomux = {0x030000, 0x010000, 0, 0 }, 1625 .gpiomute = 0x020000, 1626 .no_msp34xx = 1, 1627 .pll = PLL_28, 1628 .tuner_type = TUNER_PHILIPS_NTSC_M, 1629 .tuner_addr = ADDR_UNSET, 1630 .audio_mode_gpio= gvbctv5pci_audio, 1631 .has_radio = 1, 1632 }, 1633 [BTTV_BOARD_OSPREY1x0] = { 1634 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */ 1635 .video_inputs = 4, /* id-inputs-clock */ 1636 /* .audio_inputs= 0, */ 1637 .svhs = 3, 1638 .muxsel = MUXSEL(3, 2, 0, 1), 1639 .pll = PLL_28, 1640 .tuner_type = TUNER_ABSENT, 1641 .tuner_addr = ADDR_UNSET, 1642 .no_msp34xx = 1, 1643 .no_tda7432 = 1, 1644 }, 1645 [BTTV_BOARD_OSPREY1x0_848] = { 1646 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */ 1647 .video_inputs = 3, 1648 /* .audio_inputs= 0, */ 1649 .svhs = 2, 1650 .muxsel = MUXSEL(2, 3, 1), 1651 .pll = PLL_28, 1652 .tuner_type = TUNER_ABSENT, 1653 .tuner_addr = ADDR_UNSET, 1654 .no_msp34xx = 1, 1655 .no_tda7432 = 1, 1656 }, 1657 1658 /* ---- card 0x54 ---------------------------------- */ 1659 [BTTV_BOARD_OSPREY101_848] = { 1660 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */ 1661 .video_inputs = 2, 1662 /* .audio_inputs= 0, */ 1663 .svhs = 1, 1664 .muxsel = MUXSEL(3, 1), 1665 .pll = PLL_28, 1666 .tuner_type = TUNER_ABSENT, 1667 .tuner_addr = ADDR_UNSET, 1668 .no_msp34xx = 1, 1669 .no_tda7432 = 1, 1670 }, 1671 [BTTV_BOARD_OSPREY1x1] = { 1672 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */ 1673 .video_inputs = 1, 1674 /* .audio_inputs= 0, */ 1675 .svhs = NO_SVHS, 1676 .muxsel = MUXSEL(0), 1677 .pll = PLL_28, 1678 .tuner_type = TUNER_ABSENT, 1679 .tuner_addr = ADDR_UNSET, 1680 .no_msp34xx = 1, 1681 .no_tda7432 = 1, 1682 }, 1683 [BTTV_BOARD_OSPREY1x1_SVID] = { 1684 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */ 1685 .video_inputs = 2, 1686 /* .audio_inputs= 0, */ 1687 .svhs = 1, 1688 .muxsel = MUXSEL(0, 1), 1689 .pll = PLL_28, 1690 .tuner_type = TUNER_ABSENT, 1691 .tuner_addr = ADDR_UNSET, 1692 .no_msp34xx = 1, 1693 .no_tda7432 = 1, 1694 }, 1695 [BTTV_BOARD_OSPREY2xx] = { 1696 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */ 1697 .video_inputs = 1, 1698 /* .audio_inputs= 1, */ 1699 .svhs = NO_SVHS, 1700 .muxsel = MUXSEL(0), 1701 .pll = PLL_28, 1702 .tuner_type = TUNER_ABSENT, 1703 .tuner_addr = ADDR_UNSET, 1704 .no_msp34xx = 1, 1705 .no_tda7432 = 1, 1706 }, 1707 1708 /* ---- card 0x58 ---------------------------------- */ 1709 [BTTV_BOARD_OSPREY2x0_SVID] = { 1710 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */ 1711 .video_inputs = 2, 1712 /* .audio_inputs= 1, */ 1713 .svhs = 1, 1714 .muxsel = MUXSEL(0, 1), 1715 .pll = PLL_28, 1716 .tuner_type = TUNER_ABSENT, 1717 .tuner_addr = ADDR_UNSET, 1718 .no_msp34xx = 1, 1719 .no_tda7432 = 1, 1720 }, 1721 [BTTV_BOARD_OSPREY2x0] = { 1722 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */ 1723 .video_inputs = 2, 1724 /* .audio_inputs= 1, */ 1725 .svhs = 1, 1726 .muxsel = MUXSEL(2, 3), 1727 .pll = PLL_28, 1728 .tuner_type = TUNER_ABSENT, 1729 .tuner_addr = ADDR_UNSET, 1730 .no_msp34xx = 1, 1731 .no_tda7432 = 1, 1732 }, 1733 [BTTV_BOARD_OSPREY500] = { 1734 .name = "Osprey 500", /* 500 */ 1735 .video_inputs = 2, 1736 /* .audio_inputs= 1, */ 1737 .svhs = 1, 1738 .muxsel = MUXSEL(2, 3), 1739 .pll = PLL_28, 1740 .tuner_type = TUNER_ABSENT, 1741 .tuner_addr = ADDR_UNSET, 1742 .no_msp34xx = 1, 1743 .no_tda7432 = 1, 1744 }, 1745 [BTTV_BOARD_OSPREY540] = { 1746 .name = "Osprey 540", /* 540 */ 1747 .video_inputs = 4, 1748 /* .audio_inputs= 1, */ 1749 .pll = PLL_28, 1750 .tuner_type = TUNER_ABSENT, 1751 .tuner_addr = ADDR_UNSET, 1752 .no_msp34xx = 1, 1753 .no_tda7432 = 1, 1754 }, 1755 1756 /* ---- card 0x5C ---------------------------------- */ 1757 [BTTV_BOARD_OSPREY2000] = { 1758 .name = "Osprey 2000", /* 2000 */ 1759 .video_inputs = 2, 1760 /* .audio_inputs= 1, */ 1761 .svhs = 1, 1762 .muxsel = MUXSEL(2, 3), 1763 .pll = PLL_28, 1764 .tuner_type = TUNER_ABSENT, 1765 .tuner_addr = ADDR_UNSET, 1766 .no_msp34xx = 1, 1767 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */ 1768 }, 1769 [BTTV_BOARD_IDS_EAGLE] = { 1770 /* M G Berberich <berberic@forwiss.uni-passau.de> */ 1771 .name = "IDS Eagle", 1772 .video_inputs = 4, 1773 /* .audio_inputs= 0, */ 1774 .tuner_type = TUNER_ABSENT, 1775 .tuner_addr = ADDR_UNSET, 1776 .svhs = NO_SVHS, 1777 .gpiomask = 0, 1778 .muxsel = MUXSEL(2, 2, 2, 2), 1779 .muxsel_hook = eagle_muxsel, 1780 .no_msp34xx = 1, 1781 .pll = PLL_28, 1782 }, 1783 [BTTV_BOARD_PINNACLESAT] = { 1784 .name = "Pinnacle PCTV Sat", 1785 .video_inputs = 2, 1786 /* .audio_inputs= 0, */ 1787 .svhs = 1, 1788 .tuner_type = TUNER_ABSENT, 1789 .tuner_addr = ADDR_UNSET, 1790 .no_msp34xx = 1, 1791 .no_tda7432 = 1, 1792 .muxsel = MUXSEL(3, 1), 1793 .pll = PLL_28, 1794 .no_gpioirq = 1, 1795 .has_dvb = 1, 1796 }, 1797 [BTTV_BOARD_FORMAC_PROTV] = { 1798 .name = "Formac ProTV II (bt878)", 1799 .video_inputs = 4, 1800 /* .audio_inputs= 1, */ 1801 .svhs = 3, 1802 .gpiomask = 2, 1803 /* TV, Comp1, Composite over SVID con, SVID */ 1804 .muxsel = MUXSEL(2, 3, 1, 1), 1805 .gpiomux = { 2, 2, 0, 0 }, 1806 .pll = PLL_28, 1807 .has_radio = 1, 1808 .tuner_type = TUNER_PHILIPS_PAL, 1809 .tuner_addr = ADDR_UNSET, 1810 /* sound routing: 1811 GPIO=0x00,0x01,0x03: mute (?) 1812 0x02: both TV and radio (tuner: FM1216/I) 1813 The card has onboard audio connectors labeled "cdrom" and "board", 1814 not soldered here, though unknown wiring. 1815 Card lacks: external audio in, pci subsystem id. 1816 */ 1817 }, 1818 1819 /* ---- card 0x60 ---------------------------------- */ 1820 [BTTV_BOARD_MACHTV] = { 1821 .name = "MachTV", 1822 .video_inputs = 3, 1823 /* .audio_inputs= 1, */ 1824 .svhs = NO_SVHS, 1825 .gpiomask = 7, 1826 .muxsel = MUXSEL(2, 3, 1, 1), 1827 .gpiomux = { 0, 1, 2, 3}, 1828 .gpiomute = 4, 1829 .tuner_type = TUNER_PHILIPS_PAL, 1830 .tuner_addr = ADDR_UNSET, 1831 .pll = PLL_28, 1832 }, 1833 [BTTV_BOARD_EURESYS_PICOLO] = { 1834 .name = "Euresys Picolo", 1835 .video_inputs = 3, 1836 /* .audio_inputs= 0, */ 1837 .svhs = 2, 1838 .gpiomask = 0, 1839 .no_msp34xx = 1, 1840 .no_tda7432 = 1, 1841 .muxsel = MUXSEL(2, 0, 1), 1842 .pll = PLL_28, 1843 .tuner_type = TUNER_ABSENT, 1844 .tuner_addr = ADDR_UNSET, 1845 }, 1846 [BTTV_BOARD_PV150] = { 1847 /* Luc Van Hoeylandt <luc@e-magic.be> */ 1848 .name = "ProVideo PV150", /* 0x4f */ 1849 .video_inputs = 2, 1850 /* .audio_inputs= 0, */ 1851 .svhs = NO_SVHS, 1852 .gpiomask = 0, 1853 .muxsel = MUXSEL(2, 3), 1854 .gpiomux = { 0 }, 1855 .no_msp34xx = 1, 1856 .pll = PLL_28, 1857 .tuner_type = TUNER_ABSENT, 1858 .tuner_addr = ADDR_UNSET, 1859 }, 1860 [BTTV_BOARD_AD_TVK503] = { 1861 /* Hiroshi Takekawa <sian@big.or.jp> */ 1862 /* This card lacks subsystem ID */ 1863 .name = "AD-TVK503", /* 0x63 */ 1864 .video_inputs = 4, 1865 /* .audio_inputs= 1, */ 1866 .svhs = 2, 1867 .gpiomask = 0x001e8007, 1868 .muxsel = MUXSEL(2, 3, 1, 0), 1869 /* Tuner, Radio, external, internal, off, on */ 1870 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 }, 1871 .gpiomute = 0x0f, 1872 .no_msp34xx = 1, 1873 .pll = PLL_28, 1874 .tuner_type = TUNER_PHILIPS_NTSC, 1875 .tuner_addr = ADDR_UNSET, 1876 .audio_mode_gpio= adtvk503_audio, 1877 }, 1878 1879 /* ---- card 0x64 ---------------------------------- */ 1880 [BTTV_BOARD_HERCULES_SM_TV] = { 1881 .name = "Hercules Smart TV Stereo", 1882 .video_inputs = 4, 1883 /* .audio_inputs= 1, */ 1884 .svhs = 2, 1885 .gpiomask = 0x00, 1886 .muxsel = MUXSEL(2, 3, 1, 1), 1887 .no_msp34xx = 1, 1888 .pll = PLL_28, 1889 .tuner_type = TUNER_PHILIPS_PAL, 1890 .tuner_addr = ADDR_UNSET, 1891 /* Notes: 1892 - card lacks subsystem ID 1893 - stereo variant w/ daughter board with tda9874a @0xb0 1894 - Audio Routing: 1895 always from tda9874 independent of GPIO (?) 1896 external line in: unknown 1897 - Other chips: em78p156elp @ 0x96 (probably IR remote control) 1898 hef4053 (instead 4052) for unknown function 1899 */ 1900 }, 1901 [BTTV_BOARD_PACETV] = { 1902 .name = "Pace TV & Radio Card", 1903 .video_inputs = 4, 1904 /* .audio_inputs= 1, */ 1905 .svhs = 2, 1906 /* Tuner, CVid, SVid, CVid over SVid connector */ 1907 .muxsel = MUXSEL(2, 3, 1, 1), 1908 .gpiomask = 0, 1909 .no_tda7432 = 1, 1910 .tuner_type = TUNER_PHILIPS_PAL_I, 1911 .tuner_addr = ADDR_UNSET, 1912 .has_radio = 1, 1913 .pll = PLL_28, 1914 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id 1915 only internal line out: (4pin header) RGGL 1916 Radio must be decoded by msp3410d (not routed through)*/ 1917 /* 1918 .digital_mode = DIGITAL_MODE_CAMERA, todo! 1919 */ 1920 }, 1921 [BTTV_BOARD_IVC200] = { 1922 /* Chris Willing <chris@vislab.usyd.edu.au> */ 1923 .name = "IVC-200", 1924 .video_inputs = 1, 1925 /* .audio_inputs= 0, */ 1926 .tuner_type = TUNER_ABSENT, 1927 .tuner_addr = ADDR_UNSET, 1928 .svhs = NO_SVHS, 1929 .gpiomask = 0xdf, 1930 .muxsel = MUXSEL(2), 1931 .pll = PLL_28, 1932 }, 1933 [BTTV_BOARD_IVCE8784] = { 1934 .name = "IVCE-8784", 1935 .video_inputs = 1, 1936 /* .audio_inputs= 0, */ 1937 .tuner_type = TUNER_ABSENT, 1938 .tuner_addr = ADDR_UNSET, 1939 .svhs = NO_SVHS, 1940 .gpiomask = 0xdf, 1941 .muxsel = MUXSEL(2), 1942 .pll = PLL_28, 1943 }, 1944 [BTTV_BOARD_XGUARD] = { 1945 .name = "Grand X-Guard / Trust 814PCI", 1946 .video_inputs = 16, 1947 /* .audio_inputs= 0, */ 1948 .svhs = NO_SVHS, 1949 .tuner_type = TUNER_ABSENT, 1950 .tuner_addr = ADDR_UNSET, 1951 .gpiomask2 = 0xff, 1952 .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0), 1953 .muxsel_hook = xguard_muxsel, 1954 .no_msp34xx = 1, 1955 .no_tda7432 = 1, 1956 .pll = PLL_28, 1957 }, 1958 1959 /* ---- card 0x68 ---------------------------------- */ 1960 [BTTV_BOARD_NEBULA_DIGITV] = { 1961 .name = "Nebula Electronics DigiTV", 1962 .video_inputs = 1, 1963 .svhs = NO_SVHS, 1964 .muxsel = MUXSEL(2, 3, 1, 0), 1965 .no_msp34xx = 1, 1966 .no_tda7432 = 1, 1967 .pll = PLL_28, 1968 .tuner_type = TUNER_ABSENT, 1969 .tuner_addr = ADDR_UNSET, 1970 .has_dvb = 1, 1971 .has_remote = 1, 1972 .gpiomask = 0x1b, 1973 .no_gpioirq = 1, 1974 }, 1975 [BTTV_BOARD_PV143] = { 1976 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */ 1977 .name = "ProVideo PV143", 1978 .video_inputs = 4, 1979 /* .audio_inputs= 0, */ 1980 .svhs = NO_SVHS, 1981 .gpiomask = 0, 1982 .muxsel = MUXSEL(2, 3, 1, 0), 1983 .gpiomux = { 0 }, 1984 .no_msp34xx = 1, 1985 .pll = PLL_28, 1986 .tuner_type = TUNER_ABSENT, 1987 .tuner_addr = ADDR_UNSET, 1988 }, 1989 [BTTV_BOARD_VD009X1_VD011_MINIDIN] = { 1990 /* M.Klahr@phytec.de */ 1991 .name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)", 1992 .video_inputs = 4, 1993 /* .audio_inputs= 0, */ 1994 .svhs = 3, 1995 .gpiomask = 0x00, 1996 .muxsel = MUXSEL(2, 3, 1, 0), 1997 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 1998 .pll = PLL_28, 1999 .tuner_type = TUNER_ABSENT, 2000 .tuner_addr = ADDR_UNSET, 2001 }, 2002 [BTTV_BOARD_VD009X1_VD011_COMBI] = { 2003 .name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)", 2004 .video_inputs = 4, 2005 /* .audio_inputs= 0, */ 2006 .svhs = 3, 2007 .gpiomask = 0x00, 2008 .muxsel = MUXSEL(2, 3, 1, 1), 2009 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2010 .pll = PLL_28, 2011 .tuner_type = TUNER_ABSENT, 2012 .tuner_addr = ADDR_UNSET, 2013 }, 2014 2015 /* ---- card 0x6c ---------------------------------- */ 2016 [BTTV_BOARD_VD009_MINIDIN] = { 2017 .name = "PHYTEC VD-009 MiniDIN (bt878)", 2018 .video_inputs = 10, 2019 /* .audio_inputs= 0, */ 2020 .svhs = 9, 2021 .gpiomask = 0x00, 2022 .gpiomask2 = 0x03, /* used for external vodeo mux */ 2023 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0), 2024 .muxsel_hook = phytec_muxsel, 2025 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2026 .pll = PLL_28, 2027 .tuner_type = TUNER_ABSENT, 2028 .tuner_addr = ADDR_UNSET, 2029 }, 2030 [BTTV_BOARD_VD009_COMBI] = { 2031 .name = "PHYTEC VD-009 Combi (bt878)", 2032 .video_inputs = 10, 2033 /* .audio_inputs= 0, */ 2034 .svhs = 9, 2035 .gpiomask = 0x00, 2036 .gpiomask2 = 0x03, /* used for external vodeo mux */ 2037 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), 2038 .muxsel_hook = phytec_muxsel, 2039 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2040 .pll = PLL_28, 2041 .tuner_type = TUNER_ABSENT, 2042 .tuner_addr = ADDR_UNSET, 2043 }, 2044 [BTTV_BOARD_IVC100] = { 2045 .name = "IVC-100", 2046 .video_inputs = 4, 2047 /* .audio_inputs= 0, */ 2048 .tuner_type = TUNER_ABSENT, 2049 .tuner_addr = ADDR_UNSET, 2050 .svhs = NO_SVHS, 2051 .gpiomask = 0xdf, 2052 .muxsel = MUXSEL(2, 3, 1, 0), 2053 .pll = PLL_28, 2054 }, 2055 [BTTV_BOARD_IVC120] = { 2056 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */ 2057 .name = "IVC-120G", 2058 .video_inputs = 16, 2059 /* .audio_inputs= 0, */ 2060 .tuner_type = TUNER_ABSENT, 2061 .tuner_addr = ADDR_UNSET, 2062 .svhs = NO_SVHS, /* card has no svhs */ 2063 .no_msp34xx = 1, 2064 .no_tda7432 = 1, 2065 .gpiomask = 0x00, 2066 .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), 2067 .muxsel_hook = ivc120_muxsel, 2068 .pll = PLL_28, 2069 }, 2070 2071 /* ---- card 0x70 ---------------------------------- */ 2072 [BTTV_BOARD_PC_HDTV] = { 2073 .name = "pcHDTV HD-2000 TV", 2074 .video_inputs = 4, 2075 /* .audio_inputs= 1, */ 2076 .svhs = 2, 2077 .muxsel = MUXSEL(2, 3, 1, 0), 2078 .tuner_type = TUNER_PHILIPS_FCV1236D, 2079 .tuner_addr = ADDR_UNSET, 2080 .has_dvb = 1, 2081 }, 2082 [BTTV_BOARD_TWINHAN_DST] = { 2083 .name = "Twinhan DST + clones", 2084 .no_msp34xx = 1, 2085 .no_tda7432 = 1, 2086 .tuner_type = TUNER_ABSENT, 2087 .tuner_addr = ADDR_UNSET, 2088 .no_video = 1, 2089 .has_dvb = 1, 2090 }, 2091 [BTTV_BOARD_WINFASTVC100] = { 2092 .name = "Winfast VC100", 2093 .video_inputs = 3, 2094 /* .audio_inputs= 0, */ 2095 .svhs = 1, 2096 /* Vid In, SVid In, Vid over SVid in connector */ 2097 .muxsel = MUXSEL(3, 1, 1, 3), 2098 .no_msp34xx = 1, 2099 .no_tda7432 = 1, 2100 .tuner_type = TUNER_ABSENT, 2101 .tuner_addr = ADDR_UNSET, 2102 .pll = PLL_28, 2103 }, 2104 [BTTV_BOARD_TEV560] = { 2105 .name = "Teppro TEV-560/InterVision IV-560", 2106 .video_inputs = 3, 2107 /* .audio_inputs= 1, */ 2108 .svhs = 2, 2109 .gpiomask = 3, 2110 .muxsel = MUXSEL(2, 3, 1, 1), 2111 .gpiomux = { 1, 1, 1, 1 }, 2112 .tuner_type = TUNER_PHILIPS_PAL, 2113 .tuner_addr = ADDR_UNSET, 2114 .pll = PLL_35, 2115 }, 2116 2117 /* ---- card 0x74 ---------------------------------- */ 2118 [BTTV_BOARD_SIMUS_GVC1100] = { 2119 .name = "SIMUS GVC1100", 2120 .video_inputs = 4, 2121 /* .audio_inputs= 0, */ 2122 .svhs = NO_SVHS, 2123 .tuner_type = TUNER_ABSENT, 2124 .tuner_addr = ADDR_UNSET, 2125 .pll = PLL_28, 2126 .muxsel = MUXSEL(2, 2, 2, 2), 2127 .gpiomask = 0x3F, 2128 .muxsel_hook = gvc1100_muxsel, 2129 }, 2130 [BTTV_BOARD_NGSTV_PLUS] = { 2131 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */ 2132 .name = "NGS NGSTV+", 2133 .video_inputs = 3, 2134 .svhs = 2, 2135 .gpiomask = 0x008007, 2136 .muxsel = MUXSEL(2, 3, 0, 0), 2137 .gpiomux = { 0, 0, 0, 0 }, 2138 .gpiomute = 0x000003, 2139 .pll = PLL_28, 2140 .tuner_type = TUNER_PHILIPS_PAL, 2141 .tuner_addr = ADDR_UNSET, 2142 .has_remote = 1, 2143 }, 2144 [BTTV_BOARD_LMLBT4] = { 2145 /* http://linuxmedialabs.com */ 2146 .name = "LMLBT4", 2147 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */ 2148 /* .audio_inputs= 0, */ 2149 .svhs = NO_SVHS, 2150 .muxsel = MUXSEL(2, 3, 1, 0), 2151 .no_msp34xx = 1, 2152 .no_tda7432 = 1, 2153 .tuner_type = TUNER_ABSENT, 2154 .tuner_addr = ADDR_UNSET, 2155 }, 2156 [BTTV_BOARD_TEKRAM_M205] = { 2157 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */ 2158 .name = "Tekram M205 PRO", 2159 .video_inputs = 3, 2160 /* .audio_inputs= 1, */ 2161 .tuner_type = TUNER_PHILIPS_PAL, 2162 .tuner_addr = ADDR_UNSET, 2163 .svhs = 2, 2164 .gpiomask = 0x68, 2165 .muxsel = MUXSEL(2, 3, 1), 2166 .gpiomux = { 0x68, 0x68, 0x61, 0x61 }, 2167 .pll = PLL_28, 2168 }, 2169 2170 /* ---- card 0x78 ---------------------------------- */ 2171 [BTTV_BOARD_CONTVFMI] = { 2172 /* Javier Cendan Ares <jcendan@lycos.es> */ 2173 /* bt878 TV + FM without subsystem ID */ 2174 .name = "Conceptronic CONTVFMi", 2175 .video_inputs = 3, 2176 /* .audio_inputs= 1, */ 2177 .svhs = 2, 2178 .gpiomask = 0x008007, 2179 .muxsel = MUXSEL(2, 3, 1, 1), 2180 .gpiomux = { 0, 1, 2, 2 }, 2181 .gpiomute = 3, 2182 .pll = PLL_28, 2183 .tuner_type = TUNER_PHILIPS_PAL, 2184 .tuner_addr = ADDR_UNSET, 2185 .has_remote = 1, 2186 .has_radio = 1, 2187 }, 2188 [BTTV_BOARD_PICOLO_TETRA_CHIP] = { 2189 /*Eric DEBIEF <debief@telemsa.com>*/ 2190 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/ 2191 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/ 2192 /*0x79 in bttv.h*/ 2193 .name = "Euresys Picolo Tetra", 2194 .video_inputs = 4, 2195 /* .audio_inputs= 0, */ 2196 .svhs = NO_SVHS, 2197 .gpiomask = 0, 2198 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/ 2199 .no_msp34xx = 1, 2200 .no_tda7432 = 1, 2201 /*878A input is always MUX0, see above.*/ 2202 .muxsel = MUXSEL(2, 2, 2, 2), 2203 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2204 .pll = PLL_28, 2205 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/ 2206 .tuner_type = TUNER_ABSENT, 2207 .tuner_addr = ADDR_UNSET, 2208 }, 2209 [BTTV_BOARD_SPIRIT_TV] = { 2210 /* Spirit TV Tuner from http://spiritmodems.com.au */ 2211 /* Stafford Goodsell <surge@goliath.homeunix.org> */ 2212 .name = "Spirit TV Tuner", 2213 .video_inputs = 3, 2214 /* .audio_inputs= 1, */ 2215 .svhs = 2, 2216 .gpiomask = 0x0000000f, 2217 .muxsel = MUXSEL(2, 1, 1), 2218 .gpiomux = { 0x02, 0x00, 0x00, 0x00 }, 2219 .tuner_type = TUNER_TEMIC_PAL, 2220 .tuner_addr = ADDR_UNSET, 2221 .no_msp34xx = 1, 2222 }, 2223 [BTTV_BOARD_AVDVBT_771] = { 2224 /* Wolfram Joost <wojo@frokaschwei.de> */ 2225 .name = "AVerMedia AVerTV DVB-T 771", 2226 .video_inputs = 2, 2227 .svhs = 1, 2228 .tuner_type = TUNER_ABSENT, 2229 .tuner_addr = ADDR_UNSET, 2230 .muxsel = MUXSEL(3, 3), 2231 .no_msp34xx = 1, 2232 .no_tda7432 = 1, 2233 .pll = PLL_28, 2234 .has_dvb = 1, 2235 .no_gpioirq = 1, 2236 .has_remote = 1, 2237 }, 2238 /* ---- card 0x7c ---------------------------------- */ 2239 [BTTV_BOARD_AVDVBT_761] = { 2240 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */ 2241 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */ 2242 .name = "AverMedia AverTV DVB-T 761", 2243 .video_inputs = 2, 2244 .svhs = 1, 2245 .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */ 2246 .no_msp34xx = 1, 2247 .no_tda7432 = 1, 2248 .pll = PLL_28, 2249 .tuner_type = TUNER_ABSENT, 2250 .tuner_addr = ADDR_UNSET, 2251 .has_dvb = 1, 2252 .no_gpioirq = 1, 2253 .has_remote = 1, 2254 }, 2255 [BTTV_BOARD_MATRIX_VISIONSQ] = { 2256 /* andre.schwarz@matrix-vision.de */ 2257 .name = "MATRIX Vision Sigma-SQ", 2258 .video_inputs = 16, 2259 /* .audio_inputs= 0, */ 2260 .svhs = NO_SVHS, 2261 .gpiomask = 0x0, 2262 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3), 2263 .muxsel_hook = sigmaSQ_muxsel, 2264 .gpiomux = { 0 }, 2265 .no_msp34xx = 1, 2266 .pll = PLL_28, 2267 .tuner_type = TUNER_ABSENT, 2268 .tuner_addr = ADDR_UNSET, 2269 }, 2270 [BTTV_BOARD_MATRIX_VISIONSLC] = { 2271 /* andre.schwarz@matrix-vision.de */ 2272 .name = "MATRIX Vision Sigma-SLC", 2273 .video_inputs = 4, 2274 /* .audio_inputs= 0, */ 2275 .svhs = NO_SVHS, 2276 .gpiomask = 0x0, 2277 .muxsel = MUXSEL(2, 2, 2, 2), 2278 .muxsel_hook = sigmaSLC_muxsel, 2279 .gpiomux = { 0 }, 2280 .no_msp34xx = 1, 2281 .pll = PLL_28, 2282 .tuner_type = TUNER_ABSENT, 2283 .tuner_addr = ADDR_UNSET, 2284 }, 2285 /* BTTV_BOARD_APAC_VIEWCOMP */ 2286 [BTTV_BOARD_APAC_VIEWCOMP] = { 2287 /* Attila Kondoros <attila.kondoros@chello.hu> */ 2288 /* bt878 TV + FM 0x00000000 subsystem ID */ 2289 .name = "APAC Viewcomp 878(AMAX)", 2290 .video_inputs = 2, 2291 /* .audio_inputs= 1, */ 2292 .svhs = NO_SVHS, 2293 .gpiomask = 0xFF, 2294 .muxsel = MUXSEL(2, 3, 1, 1), 2295 .gpiomux = { 2, 0, 0, 0 }, 2296 .gpiomute = 10, 2297 .pll = PLL_28, 2298 .tuner_type = TUNER_PHILIPS_PAL, 2299 .tuner_addr = ADDR_UNSET, 2300 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */ 2301 .has_radio = 1, /* not every card has radio */ 2302 }, 2303 2304 /* ---- card 0x80 ---------------------------------- */ 2305 [BTTV_BOARD_DVICO_DVBT_LITE] = { 2306 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */ 2307 .name = "DViCO FusionHDTV DVB-T Lite", 2308 .no_msp34xx = 1, 2309 .no_tda7432 = 1, 2310 .pll = PLL_28, 2311 .no_video = 1, 2312 .has_dvb = 1, 2313 .tuner_type = TUNER_ABSENT, 2314 .tuner_addr = ADDR_UNSET, 2315 }, 2316 [BTTV_BOARD_VGEAR_MYVCD] = { 2317 /* Steven <photon38@pchome.com.tw> */ 2318 .name = "V-Gear MyVCD", 2319 .video_inputs = 3, 2320 /* .audio_inputs= 1, */ 2321 .svhs = 2, 2322 .gpiomask = 0x3f, 2323 .muxsel = MUXSEL(2, 3, 1, 0), 2324 .gpiomux = {0x31, 0x31, 0x31, 0x31 }, 2325 .gpiomute = 0x31, 2326 .no_msp34xx = 1, 2327 .pll = PLL_28, 2328 .tuner_type = TUNER_PHILIPS_NTSC_M, 2329 .tuner_addr = ADDR_UNSET, 2330 .has_radio = 0, 2331 }, 2332 [BTTV_BOARD_SUPER_TV] = { 2333 /* Rick C <cryptdragoon@gmail.com> */ 2334 .name = "Super TV Tuner", 2335 .video_inputs = 4, 2336 /* .audio_inputs= 1, */ 2337 .svhs = 2, 2338 .muxsel = MUXSEL(2, 3, 1, 0), 2339 .tuner_type = TUNER_PHILIPS_NTSC, 2340 .tuner_addr = ADDR_UNSET, 2341 .gpiomask = 0x008007, 2342 .gpiomux = { 0, 0x000001,0,0 }, 2343 .has_radio = 1, 2344 }, 2345 [BTTV_BOARD_TIBET_CS16] = { 2346 /* Chris Fanning <video4linux@haydon.net> */ 2347 .name = "Tibet Systems 'Progress DVR' CS16", 2348 .video_inputs = 16, 2349 /* .audio_inputs= 0, */ 2350 .svhs = NO_SVHS, 2351 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), 2352 .pll = PLL_28, 2353 .no_msp34xx = 1, 2354 .no_tda7432 = 1, 2355 .tuner_type = TUNER_ABSENT, 2356 .tuner_addr = ADDR_UNSET, 2357 .muxsel_hook = tibetCS16_muxsel, 2358 }, 2359 [BTTV_BOARD_KODICOM_4400R] = { 2360 /* Bill Brack <wbrack@mmm.com.hk> */ 2361 /* 2362 * Note that, because of the card's wiring, the "master" 2363 * BT878A chip (i.e. the one which controls the analog switch 2364 * and must use this card type) is the 2nd one detected. The 2365 * other 3 chips should use card type 0x85, whose description 2366 * follows this one. There is a EEPROM on the card (which is 2367 * connected to the I2C of one of those other chips), but is 2368 * not currently handled. There is also a facility for a 2369 * "monitor", which is also not currently implemented. 2370 */ 2371 .name = "Kodicom 4400R (master)", 2372 .video_inputs = 16, 2373 /* .audio_inputs= 0, */ 2374 .tuner_type = TUNER_ABSENT, 2375 .tuner_addr = ADDR_UNSET, 2376 .svhs = NO_SVHS, 2377 /* GPIO bits 0-9 used for analog switch: 2378 * 00 - 03: camera selector 2379 * 04 - 06: channel (controller) selector 2380 * 07: data (1->on, 0->off) 2381 * 08: strobe 2382 * 09: reset 2383 * bit 16 is input from sync separator for the channel 2384 */ 2385 .gpiomask = 0x0003ff, 2386 .no_gpioirq = 1, 2387 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), 2388 .pll = PLL_28, 2389 .no_msp34xx = 1, 2390 .no_tda7432 = 1, 2391 .muxsel_hook = kodicom4400r_muxsel, 2392 }, 2393 [BTTV_BOARD_KODICOM_4400R_SL] = { 2394 /* Bill Brack <wbrack@mmm.com.hk> */ 2395 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the 2396 * one which controls the analog switch, and must use the card type) 2397 * is the 2nd one detected. The other 3 chips should use this card 2398 * type 2399 */ 2400 .name = "Kodicom 4400R (slave)", 2401 .video_inputs = 16, 2402 /* .audio_inputs= 0, */ 2403 .tuner_type = TUNER_ABSENT, 2404 .tuner_addr = ADDR_UNSET, 2405 .svhs = NO_SVHS, 2406 .gpiomask = 0x010000, 2407 .no_gpioirq = 1, 2408 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), 2409 .pll = PLL_28, 2410 .no_msp34xx = 1, 2411 .no_tda7432 = 1, 2412 .muxsel_hook = kodicom4400r_muxsel, 2413 }, 2414 /* ---- card 0x86---------------------------------- */ 2415 [BTTV_BOARD_ADLINK_RTV24] = { 2416 /* Michael Henson <mhenson@clarityvi.com> */ 2417 /* Adlink RTV24 with special unlock codes */ 2418 .name = "Adlink RTV24", 2419 .video_inputs = 4, 2420 /* .audio_inputs= 1, */ 2421 .svhs = 2, 2422 .muxsel = MUXSEL(2, 3, 1, 0), 2423 .tuner_type = UNSET, 2424 .tuner_addr = ADDR_UNSET, 2425 .pll = PLL_28, 2426 }, 2427 /* ---- card 0x87---------------------------------- */ 2428 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = { 2429 /* Michael Krufky <mkrufky@m1k.net> */ 2430 .name = "DViCO FusionHDTV 5 Lite", 2431 .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */ 2432 .tuner_addr = ADDR_UNSET, 2433 .video_inputs = 3, 2434 /* .audio_inputs= 1, */ 2435 .svhs = 2, 2436 .muxsel = MUXSEL(2, 3, 1), 2437 .gpiomask = 0x00e00007, 2438 .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, 2439 .gpiomute = 0x00c00007, 2440 .no_msp34xx = 1, 2441 .no_tda7432 = 1, 2442 .has_dvb = 1, 2443 }, 2444 /* ---- card 0x88---------------------------------- */ 2445 [BTTV_BOARD_ACORP_Y878F] = { 2446 /* Mauro Carvalho Chehab <mchehab@infradead.org> */ 2447 .name = "Acorp Y878F", 2448 .video_inputs = 3, 2449 /* .audio_inputs= 1, */ 2450 .svhs = 2, 2451 .gpiomask = 0x01fe00, 2452 .muxsel = MUXSEL(2, 3, 1, 1), 2453 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, 2454 .gpiomute = 0x002000, 2455 .pll = PLL_28, 2456 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF, 2457 .tuner_addr = 0xc1 >>1, 2458 .has_radio = 1, 2459 }, 2460 /* ---- card 0x89 ---------------------------------- */ 2461 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = { 2462 .name = "Conceptronic CTVFMi v2", 2463 .video_inputs = 3, 2464 /* .audio_inputs= 1, */ 2465 .svhs = 2, 2466 .gpiomask = 0x001c0007, 2467 .muxsel = MUXSEL(2, 3, 1, 1), 2468 .gpiomux = { 0, 1, 2, 2 }, 2469 .gpiomute = 3, 2470 .pll = PLL_28, 2471 .tuner_type = TUNER_TENA_9533_DI, 2472 .tuner_addr = ADDR_UNSET, 2473 .has_remote = 1, 2474 .has_radio = 1, 2475 }, 2476 /* ---- card 0x8a ---------------------------------- */ 2477 [BTTV_BOARD_PV_BT878P_2E] = { 2478 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)", 2479 .video_inputs = 5, 2480 /* .audio_inputs= 1, */ 2481 .svhs = 3, 2482 .has_dig_in = 1, 2483 .gpiomask = 0x01fe00, 2484 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */ 2485 /* .digital_mode= DIGITAL_MODE_CAMERA, */ 2486 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 }, 2487 .gpiomute = 0x12400, 2488 .no_msp34xx = 1, 2489 .pll = PLL_28, 2490 .tuner_type = TUNER_LG_PAL_FM, 2491 .tuner_addr = ADDR_UNSET, 2492 .has_remote = 1, 2493 }, 2494 /* ---- card 0x8b ---------------------------------- */ 2495 [BTTV_BOARD_PV_M4900] = { 2496 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */ 2497 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900", 2498 .video_inputs = 3, 2499 /* .audio_inputs= 1, */ 2500 .svhs = 2, 2501 .gpiomask = 0x3f, 2502 .muxsel = MUXSEL(2, 3, 1, 1), 2503 .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, 2504 .gpiomute = 0x29, 2505 .no_msp34xx = 1, 2506 .pll = PLL_28, 2507 .tuner_type = TUNER_YMEC_TVF_5533MF, 2508 .tuner_addr = ADDR_UNSET, 2509 .has_radio = 1, 2510 .has_remote = 1, 2511 }, 2512 /* ---- card 0x8c ---------------------------------- */ 2513 /* Has four Bt878 chips behind a PCI bridge, each chip has: 2514 one external BNC composite input (mux 2) 2515 three internal composite inputs (unknown muxes) 2516 an 18-bit stereo A/D (CS5331A), which has: 2517 one external stereo unblanced (RCA) audio connection 2518 one (or 3?) internal stereo balanced (XLR) audio connection 2519 input is selected via gpio to a 14052B mux 2520 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300) 2521 gain is controlled via an X9221A chip on the I2C bus @0x28 2522 sample rate is controlled via gpio to an MK1413S 2523 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3) 2524 There is neither a tuner nor an svideo input. */ 2525 [BTTV_BOARD_OSPREY440] = { 2526 .name = "Osprey 440", 2527 .video_inputs = 4, 2528 /* .audio_inputs= 2, */ 2529 .svhs = NO_SVHS, 2530 .muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */ 2531 .gpiomask = 0x303, 2532 .gpiomute = 0x000, /* int + 32kHz */ 2533 .gpiomux = { 0, 0, 0x000, 0x100}, 2534 .pll = PLL_28, 2535 .tuner_type = TUNER_ABSENT, 2536 .tuner_addr = ADDR_UNSET, 2537 .no_msp34xx = 1, 2538 .no_tda7432 = 1, 2539 }, 2540 /* ---- card 0x8d ---------------------------------- */ 2541 [BTTV_BOARD_ASOUND_SKYEYE] = { 2542 .name = "Asound Skyeye PCTV", 2543 .video_inputs = 3, 2544 /* .audio_inputs= 1, */ 2545 .svhs = 2, 2546 .gpiomask = 15, 2547 .muxsel = MUXSEL(2, 3, 1, 1), 2548 .gpiomux = { 2, 0, 0, 0 }, 2549 .gpiomute = 1, 2550 .pll = PLL_28, 2551 .tuner_type = TUNER_PHILIPS_NTSC, 2552 .tuner_addr = ADDR_UNSET, 2553 }, 2554 /* ---- card 0x8e ---------------------------------- */ 2555 [BTTV_BOARD_SABRENT_TVFM] = { 2556 .name = "Sabrent TV-FM (bttv version)", 2557 .video_inputs = 3, 2558 /* .audio_inputs= 1, */ 2559 .svhs = 2, 2560 .gpiomask = 0x108007, 2561 .muxsel = MUXSEL(2, 3, 1, 1), 2562 .gpiomux = { 100000, 100002, 100002, 100000 }, 2563 .no_msp34xx = 1, 2564 .no_tda7432 = 1, 2565 .pll = PLL_28, 2566 .tuner_type = TUNER_TNF_5335MF, 2567 .tuner_addr = ADDR_UNSET, 2568 .has_radio = 1, 2569 }, 2570 /* ---- card 0x8f ---------------------------------- */ 2571 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = { 2572 .name = "Hauppauge ImpactVCB (bt878)", 2573 .video_inputs = 4, 2574 /* .audio_inputs= 0, */ 2575 .svhs = NO_SVHS, 2576 .gpiomask = 0x0f, /* old: 7 */ 2577 .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */ 2578 .no_msp34xx = 1, 2579 .no_tda7432 = 1, 2580 .tuner_type = TUNER_ABSENT, 2581 .tuner_addr = ADDR_UNSET, 2582 }, 2583 [BTTV_BOARD_MACHTV_MAGICTV] = { 2584 /* Julian Calaby <julian.calaby@gmail.com> 2585 * Slightly different from original MachTV definition (0x60) 2586 2587 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it 2588 * stuffs up remote chip. Bug is a pin on the jaecs is not set 2589 * properly (methinks) causing no keyup bits being set */ 2590 2591 .name = "MagicTV", /* rebranded MachTV */ 2592 .video_inputs = 3, 2593 /* .audio_inputs= 1, */ 2594 .svhs = 2, 2595 .gpiomask = 7, 2596 .muxsel = MUXSEL(2, 3, 1, 1), 2597 .gpiomux = { 0, 1, 2, 3 }, 2598 .gpiomute = 4, 2599 .tuner_type = TUNER_TEMIC_4009FR5_PAL, 2600 .tuner_addr = ADDR_UNSET, 2601 .pll = PLL_28, 2602 .has_radio = 1, 2603 .has_remote = 1, 2604 }, 2605 [BTTV_BOARD_SSAI_SECURITY] = { 2606 .name = "SSAI Security Video Interface", 2607 .video_inputs = 4, 2608 /* .audio_inputs= 0, */ 2609 .svhs = NO_SVHS, 2610 .muxsel = MUXSEL(0, 1, 2, 3), 2611 .tuner_type = TUNER_ABSENT, 2612 .tuner_addr = ADDR_UNSET, 2613 }, 2614 [BTTV_BOARD_SSAI_ULTRASOUND] = { 2615 .name = "SSAI Ultrasound Video Interface", 2616 .video_inputs = 2, 2617 /* .audio_inputs= 0, */ 2618 .svhs = 1, 2619 .muxsel = MUXSEL(2, 0, 1, 3), 2620 .tuner_type = TUNER_ABSENT, 2621 .tuner_addr = ADDR_UNSET, 2622 }, 2623 /* ---- card 0x94---------------------------------- */ 2624 [BTTV_BOARD_DVICO_FUSIONHDTV_2] = { 2625 .name = "DViCO FusionHDTV 2", 2626 .tuner_type = TUNER_PHILIPS_FCV1236D, 2627 .tuner_addr = ADDR_UNSET, 2628 .video_inputs = 3, 2629 /* .audio_inputs= 1, */ 2630 .svhs = 2, 2631 .muxsel = MUXSEL(2, 3, 1), 2632 .gpiomask = 0x00e00007, 2633 .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, 2634 .gpiomute = 0x00c00007, 2635 .no_msp34xx = 1, 2636 .no_tda7432 = 1, 2637 }, 2638 /* ---- card 0x95---------------------------------- */ 2639 [BTTV_BOARD_TYPHOON_TVTUNERPCI] = { 2640 .name = "Typhoon TV-Tuner PCI (50684)", 2641 .video_inputs = 3, 2642 /* .audio_inputs= 1, */ 2643 .svhs = 2, 2644 .gpiomask = 0x3014f, 2645 .muxsel = MUXSEL(2, 3, 1, 1), 2646 .gpiomux = { 0x20001,0x10001, 0, 0 }, 2647 .gpiomute = 10, 2648 .pll = PLL_28, 2649 .tuner_type = TUNER_PHILIPS_PAL_I, 2650 .tuner_addr = ADDR_UNSET, 2651 }, 2652 [BTTV_BOARD_GEOVISION_GV600] = { 2653 /* emhn@usb.ve */ 2654 .name = "Geovision GV-600", 2655 .video_inputs = 16, 2656 /* .audio_inputs= 0, */ 2657 .svhs = NO_SVHS, 2658 .gpiomask = 0x0, 2659 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), 2660 .muxsel_hook = geovision_muxsel, 2661 .gpiomux = { 0 }, 2662 .no_msp34xx = 1, 2663 .pll = PLL_28, 2664 .tuner_type = TUNER_ABSENT, 2665 .tuner_addr = ADDR_UNSET, 2666 }, 2667 [BTTV_BOARD_KOZUMI_KTV_01C] = { 2668 /* Mauro Lacy <mauro@lacy.com.ar> 2669 * Based on MagicTV and Conceptronic CONTVFMi */ 2670 2671 .name = "Kozumi KTV-01C", 2672 .video_inputs = 3, 2673 /* .audio_inputs= 1, */ 2674 .svhs = 2, 2675 .gpiomask = 0x008007, 2676 .muxsel = MUXSEL(2, 3, 1, 1), 2677 .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */ 2678 .gpiomute = 3, /* CONTVFMi */ 2679 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */ 2680 .tuner_addr = ADDR_UNSET, 2681 .pll = PLL_28, 2682 .has_radio = 1, 2683 .has_remote = 1, 2684 }, 2685 [BTTV_BOARD_ENLTV_FM_2] = { 2686 /* Encore TV Tuner Pro ENL TV-FM-2 2687 Mauro Carvalho Chehab <mchehab@infradead.org */ 2688 .name = "Encore ENL TV-FM-2", 2689 .video_inputs = 3, 2690 /* .audio_inputs= 1, */ 2691 .svhs = 2, 2692 /* bit 6 -> IR disabled 2693 bit 18/17 = 00 -> mute 2694 01 -> enable external audio input 2695 10 -> internal audio input (mono?) 2696 11 -> internal audio input 2697 */ 2698 .gpiomask = 0x060040, 2699 .muxsel = MUXSEL(2, 3, 3), 2700 .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 }, 2701 .gpiomute = 0, 2702 .tuner_type = TUNER_TCL_MF02GIP_5N, 2703 .tuner_addr = ADDR_UNSET, 2704 .pll = PLL_28, 2705 .has_radio = 1, 2706 .has_remote = 1, 2707 }, 2708 [BTTV_BOARD_VD012] = { 2709 /* D.Heer@Phytec.de */ 2710 .name = "PHYTEC VD-012 (bt878)", 2711 .video_inputs = 4, 2712 /* .audio_inputs= 0, */ 2713 .svhs = NO_SVHS, 2714 .gpiomask = 0x00, 2715 .muxsel = MUXSEL(0, 2, 3, 1), 2716 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2717 .pll = PLL_28, 2718 .tuner_type = TUNER_ABSENT, 2719 .tuner_addr = ADDR_UNSET, 2720 }, 2721 [BTTV_BOARD_VD012_X1] = { 2722 /* D.Heer@Phytec.de */ 2723 .name = "PHYTEC VD-012-X1 (bt878)", 2724 .video_inputs = 4, 2725 /* .audio_inputs= 0, */ 2726 .svhs = 3, 2727 .gpiomask = 0x00, 2728 .muxsel = MUXSEL(2, 3, 1), 2729 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2730 .pll = PLL_28, 2731 .tuner_type = TUNER_ABSENT, 2732 .tuner_addr = ADDR_UNSET, 2733 }, 2734 [BTTV_BOARD_VD012_X2] = { 2735 /* D.Heer@Phytec.de */ 2736 .name = "PHYTEC VD-012-X2 (bt878)", 2737 .video_inputs = 4, 2738 /* .audio_inputs= 0, */ 2739 .svhs = 3, 2740 .gpiomask = 0x00, 2741 .muxsel = MUXSEL(3, 2, 1), 2742 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2743 .pll = PLL_28, 2744 .tuner_type = TUNER_ABSENT, 2745 .tuner_addr = ADDR_UNSET, 2746 }, 2747 [BTTV_BOARD_GEOVISION_GV800S] = { 2748 /* Bruno Christo <bchristo@inf.ufsm.br> 2749 * 2750 * GeoVision GV-800(S) has 4 Conexant Fusion 878A: 2751 * 1 audio input per BT878A = 4 audio inputs 2752 * 4 video inputs per BT878A = 16 video inputs 2753 * This is the first BT878A chip of the GV-800(S). It's the 2754 * "master" chip and it controls the video inputs through an 2755 * analog multiplexer (a CD22M3494) via some GPIO pins. The 2756 * slaves should use card type 0x9e (following this one). 2757 * There is a EEPROM on the card which is currently not handled. 2758 * The audio input is not working yet. 2759 */ 2760 .name = "Geovision GV-800(S) (master)", 2761 .video_inputs = 4, 2762 /* .audio_inputs= 1, */ 2763 .tuner_type = TUNER_ABSENT, 2764 .tuner_addr = ADDR_UNSET, 2765 .svhs = NO_SVHS, 2766 .gpiomask = 0xf107f, 2767 .no_gpioirq = 1, 2768 .muxsel = MUXSEL(2, 2, 2, 2), 2769 .pll = PLL_28, 2770 .no_msp34xx = 1, 2771 .no_tda7432 = 1, 2772 .muxsel_hook = gv800s_muxsel, 2773 }, 2774 [BTTV_BOARD_GEOVISION_GV800S_SL] = { 2775 /* Bruno Christo <bchristo@inf.ufsm.br> 2776 * 2777 * GeoVision GV-800(S) has 4 Conexant Fusion 878A: 2778 * 1 audio input per BT878A = 4 audio inputs 2779 * 4 video inputs per BT878A = 16 video inputs 2780 * The 3 other BT878A chips are "slave" chips of the GV-800(S) 2781 * and should use this card type. 2782 * The audio input is not working yet. 2783 */ 2784 .name = "Geovision GV-800(S) (slave)", 2785 .video_inputs = 4, 2786 /* .audio_inputs= 1, */ 2787 .tuner_type = TUNER_ABSENT, 2788 .tuner_addr = ADDR_UNSET, 2789 .svhs = NO_SVHS, 2790 .gpiomask = 0x00, 2791 .no_gpioirq = 1, 2792 .muxsel = MUXSEL(2, 2, 2, 2), 2793 .pll = PLL_28, 2794 .no_msp34xx = 1, 2795 .no_tda7432 = 1, 2796 .muxsel_hook = gv800s_muxsel, 2797 }, 2798 [BTTV_BOARD_PV183] = { 2799 .name = "ProVideo PV183", /* 0x9f */ 2800 .video_inputs = 2, 2801 /* .audio_inputs= 0, */ 2802 .svhs = NO_SVHS, 2803 .gpiomask = 0, 2804 .muxsel = MUXSEL(2, 3), 2805 .gpiomux = { 0 }, 2806 .no_msp34xx = 1, 2807 .pll = PLL_28, 2808 .tuner_type = TUNER_ABSENT, 2809 .tuner_addr = ADDR_UNSET, 2810 }, 2811 [BTTV_BOARD_TVT_TD3116] = { 2812 .name = "Tongwei Video Technology TD-3116", 2813 .video_inputs = 16, 2814 .gpiomask = 0xc00ff, 2815 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), 2816 .muxsel_hook = td3116_muxsel, 2817 .svhs = NO_SVHS, 2818 .pll = PLL_28, 2819 .tuner_type = TUNER_ABSENT, 2820 }, 2821 [BTTV_BOARD_APOSONIC_WDVR] = { 2822 .name = "Aposonic W-DVR", 2823 .video_inputs = 4, 2824 .svhs = NO_SVHS, 2825 .muxsel = MUXSEL(2, 3, 1, 0), 2826 .tuner_type = TUNER_ABSENT, 2827 }, 2828 2829 }; 2830 2831 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards); 2832 2833 /* ----------------------------------------------------------------------- */ 2834 2835 static unsigned char eeprom_data[256]; 2836 2837 /* 2838 * identify card 2839 */ 2840 void bttv_idcard(struct bttv *btv) 2841 { 2842 unsigned int gpiobits; 2843 int i,type; 2844 2845 /* read PCI subsystem ID */ 2846 btv->cardid = btv->c.pci->subsystem_device << 16; 2847 btv->cardid |= btv->c.pci->subsystem_vendor; 2848 2849 if (0 != btv->cardid && 0xffffffff != btv->cardid) { 2850 /* look for the card */ 2851 for (type = -1, i = 0; cards[i].id != 0; i++) 2852 if (cards[i].id == btv->cardid) 2853 type = i; 2854 2855 if (type != -1) { 2856 /* found it */ 2857 pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n", 2858 btv->c.nr, cards[type].name, cards[type].cardnr, 2859 btv->cardid & 0xffff, 2860 (btv->cardid >> 16) & 0xffff); 2861 btv->c.type = cards[type].cardnr; 2862 } else { 2863 /* 404 */ 2864 pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n", 2865 btv->c.nr, btv->cardid & 0xffff, 2866 (btv->cardid >> 16) & 0xffff); 2867 pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n"); 2868 } 2869 } 2870 2871 /* let the user override the autodetected type */ 2872 if (card[btv->c.nr] < bttv_num_tvcards) 2873 btv->c.type=card[btv->c.nr]; 2874 2875 /* print which card config we are using */ 2876 pr_info("%d: using: %s [card=%d,%s]\n", 2877 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type, 2878 card[btv->c.nr] < bttv_num_tvcards 2879 ? "insmod option" : "autodetected"); 2880 2881 /* overwrite gpio stuff ?? */ 2882 if (UNSET == audioall && UNSET == audiomux[0]) 2883 return; 2884 2885 if (UNSET != audiomux[0]) { 2886 gpiobits = 0; 2887 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { 2888 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i]; 2889 gpiobits |= audiomux[i]; 2890 } 2891 } else { 2892 gpiobits = audioall; 2893 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { 2894 bttv_tvcards[btv->c.type].gpiomux[i] = audioall; 2895 } 2896 } 2897 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits; 2898 pr_info("%d: gpio config override: mask=0x%x, mux=", 2899 btv->c.nr, bttv_tvcards[btv->c.type].gpiomask); 2900 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { 2901 pr_cont("%s0x%x", 2902 i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]); 2903 } 2904 pr_cont("\n"); 2905 } 2906 2907 /* 2908 * (most) board specific initialisations goes here 2909 */ 2910 2911 /* Some Modular Technology cards have an eeprom, but no subsystem ID */ 2912 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256]) 2913 { 2914 int type = -1; 2915 2916 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13)) 2917 type = BTTV_BOARD_MODTEC_205; 2918 else if (0 == strncmp(eeprom_data+20,"Picolo",7)) 2919 type = BTTV_BOARD_EURESYS_PICOLO; 2920 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0) 2921 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */ 2922 2923 if (-1 != type) { 2924 btv->c.type = type; 2925 pr_info("%d: detected by eeprom: %s [card=%d]\n", 2926 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type); 2927 } 2928 } 2929 2930 static void flyvideo_gpio(struct bttv *btv) 2931 { 2932 int gpio, has_remote, has_radio, is_capture_only; 2933 int is_lr90, has_tda9820_tda9821; 2934 int tuner_type = UNSET, ttype; 2935 2936 gpio_inout(0xffffff, 0); 2937 udelay(8); /* without this we would see the 0x1800 mask */ 2938 gpio = gpio_read(); 2939 /* FIXME: must restore OUR_EN ??? */ 2940 2941 /* all cards provide GPIO info, some have an additional eeprom 2942 * LR50: GPIO coding can be found lower right CP1 .. CP9 2943 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1. 2944 * GPIO14-12: n.c. 2945 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878) 2946 2947 * lowest 3 bytes are remote control codes (no handshake needed) 2948 * xxxFFF: No remote control chip soldered 2949 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered 2950 * Note: Some bits are Audio_Mask ! 2951 */ 2952 ttype = (gpio & 0x0f0000) >> 16; 2953 switch (ttype) { 2954 case 0x0: 2955 tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */ 2956 break; 2957 case 0x2: 2958 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */ 2959 break; 2960 case 0x4: 2961 tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */ 2962 break; 2963 case 0x6: 2964 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */ 2965 break; 2966 case 0xC: 2967 tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */ 2968 break; 2969 default: 2970 pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr); 2971 break; 2972 } 2973 2974 has_remote = gpio & 0x800000; 2975 has_radio = gpio & 0x400000; 2976 /* unknown 0x200000; 2977 * unknown2 0x100000; */ 2978 is_capture_only = !(gpio & 0x008000); /* GPIO15 */ 2979 has_tda9820_tda9821 = !(gpio & 0x004000); 2980 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */ 2981 /* 2982 * gpio & 0x001000 output bit for audio routing */ 2983 2984 if (is_capture_only) 2985 tuner_type = TUNER_ABSENT; /* No tuner present */ 2986 2987 pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n", 2988 btv->c.nr, has_radio ? "yes" : "no", 2989 has_remote ? "yes" : "no", tuner_type, gpio); 2990 pr_info("%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n", 2991 btv->c.nr, is_lr90 ? "yes" : "no", 2992 has_tda9820_tda9821 ? "yes" : "no", 2993 is_capture_only ? "yes" : "no"); 2994 2995 if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */ 2996 btv->tuner_type = tuner_type; 2997 btv->has_radio = has_radio; 2998 2999 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80 3000 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00 3001 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */ 3002 if (has_tda9820_tda9821) 3003 btv->audio_mode_gpio = lt9415_audio; 3004 /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */ 3005 } 3006 3007 static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1, 3008 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 }; 3009 static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1, 3010 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 }; 3011 3012 static void miro_pinnacle_gpio(struct bttv *btv) 3013 { 3014 int id,msp,gpio; 3015 char *info; 3016 3017 gpio_inout(0xffffff, 0); 3018 gpio = gpio_read(); 3019 id = ((gpio>>10) & 63) -1; 3020 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx"); 3021 if (id < 32) { 3022 btv->tuner_type = miro_tunermap[id]; 3023 if (0 == (gpio & 0x20)) { 3024 btv->has_radio = 1; 3025 if (!miro_fmtuner[id]) { 3026 btv->has_matchbox = 1; 3027 btv->mbox_we = (1<<6); 3028 btv->mbox_most = (1<<7); 3029 btv->mbox_clk = (1<<8); 3030 btv->mbox_data = (1<<9); 3031 btv->mbox_mask = (1<<6)|(1<<7)|(1<<8)|(1<<9); 3032 } 3033 } else { 3034 btv->has_radio = 0; 3035 } 3036 if (-1 != msp) { 3037 if (btv->c.type == BTTV_BOARD_MIRO) 3038 btv->c.type = BTTV_BOARD_MIROPRO; 3039 if (btv->c.type == BTTV_BOARD_PINNACLE) 3040 btv->c.type = BTTV_BOARD_PINNACLEPRO; 3041 } 3042 pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n", 3043 btv->c.nr, id+1, btv->tuner_type, 3044 !btv->has_radio ? "no" : 3045 (btv->has_matchbox ? "matchbox" : "fmtuner"), 3046 (-1 == msp) ? "no" : "yes"); 3047 } else { 3048 /* new cards with microtune tuner */ 3049 id = 63 - id; 3050 btv->has_radio = 0; 3051 switch (id) { 3052 case 1: 3053 info = "PAL / mono"; 3054 btv->tda9887_conf = TDA9887_INTERCARRIER; 3055 break; 3056 case 2: 3057 info = "PAL+SECAM / stereo"; 3058 btv->has_radio = 1; 3059 btv->tda9887_conf = TDA9887_QSS; 3060 break; 3061 case 3: 3062 info = "NTSC / stereo"; 3063 btv->has_radio = 1; 3064 btv->tda9887_conf = TDA9887_QSS; 3065 break; 3066 case 4: 3067 info = "PAL+SECAM / mono"; 3068 btv->tda9887_conf = TDA9887_QSS; 3069 break; 3070 case 5: 3071 info = "NTSC / mono"; 3072 btv->tda9887_conf = TDA9887_INTERCARRIER; 3073 break; 3074 case 6: 3075 info = "NTSC / stereo"; 3076 btv->tda9887_conf = TDA9887_INTERCARRIER; 3077 break; 3078 case 7: 3079 info = "PAL / stereo"; 3080 btv->tda9887_conf = TDA9887_INTERCARRIER; 3081 break; 3082 default: 3083 info = "oops: unknown card"; 3084 break; 3085 } 3086 if (-1 != msp) 3087 btv->c.type = BTTV_BOARD_PINNACLEPRO; 3088 pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n", 3089 btv->c.nr, id, info, btv->has_radio ? "yes" : "no"); 3090 btv->tuner_type = TUNER_MT2032; 3091 } 3092 } 3093 3094 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */ 3095 #define LM1882_SYNC_DRIVE 0x200000L 3096 3097 static void init_ids_eagle(struct bttv *btv) 3098 { 3099 gpio_inout(0xffffff,0xFFFF37); 3100 gpio_write(0x200020); 3101 3102 /* flash strobe inverter ?! */ 3103 gpio_write(0x200024); 3104 3105 /* switch sync drive off */ 3106 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); 3107 3108 /* set BT848 muxel to 2 */ 3109 btaor((2)<<5, ~(2<<5), BT848_IFORM); 3110 } 3111 3112 /* Muxsel helper for the IDS Eagle. 3113 * the eagles does not use the standard muxsel-bits but 3114 * has its own multiplexer */ 3115 static void eagle_muxsel(struct bttv *btv, unsigned int input) 3116 { 3117 gpio_bits(3, input & 3); 3118 3119 /* composite */ 3120 /* set chroma ADC to sleep */ 3121 btor(BT848_ADC_C_SLEEP, BT848_ADC); 3122 /* set to composite video */ 3123 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL); 3124 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL); 3125 3126 /* switch sync drive off */ 3127 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); 3128 } 3129 3130 static void gvc1100_muxsel(struct bttv *btv, unsigned int input) 3131 { 3132 static const int masks[] = {0x30, 0x01, 0x12, 0x23}; 3133 gpio_write(masks[input%4]); 3134 } 3135 3136 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and 3137 alarms output 3138 3139 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 3140 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | | 3141 3142 IN - sensor inputs, INx - sensor inputs and TI XORed together 3143 O1,O2,O3 - alarm outputs (relays) 3144 3145 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0 3146 3147 */ 3148 3149 static void init_lmlbt4x(struct bttv *btv) 3150 { 3151 pr_debug("LMLBT4x init\n"); 3152 btwrite(0x000000, BT848_GPIO_REG_INP); 3153 gpio_inout(0xffffff, 0x0006C0); 3154 gpio_write(0x000000); 3155 } 3156 3157 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input) 3158 { 3159 unsigned int inmux = input % 8; 3160 gpio_inout( 0xf, 0xf ); 3161 gpio_bits( 0xf, inmux ); 3162 } 3163 3164 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input) 3165 { 3166 unsigned int inmux = input % 4; 3167 gpio_inout( 3<<9, 3<<9 ); 3168 gpio_bits( 3<<9, inmux<<9 ); 3169 } 3170 3171 static void geovision_muxsel(struct bttv *btv, unsigned int input) 3172 { 3173 unsigned int inmux = input % 16; 3174 gpio_inout(0xf, 0xf); 3175 gpio_bits(0xf, inmux); 3176 } 3177 3178 /* 3179 * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878. 3180 * The first 74HC4051 has the lower 8 inputs, the second one the higher 8. 3181 * The muxes are controlled via a 74HC373 latch which is connected to 3182 * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch. 3183 * Q0 of the latch is connected to the Enable (~E) input of the first 3184 * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051. 3185 * Q4 - Q7 are connected to the second 74HC4051 in the same way. 3186 */ 3187 3188 static void td3116_latch_value(struct bttv *btv, u32 value) 3189 { 3190 gpio_bits((1<<18) | 0xff, value); 3191 gpio_bits((1<<18) | 0xff, (1<<18) | value); 3192 udelay(1); 3193 gpio_bits((1<<18) | 0xff, value); 3194 } 3195 3196 static void td3116_muxsel(struct bttv *btv, unsigned int input) 3197 { 3198 u32 value; 3199 u32 highbit; 3200 3201 highbit = (input & 0x8) >> 3 ; 3202 3203 /* Disable outputs and set value in the mux */ 3204 value = 0x11; /* Disable outputs */ 3205 value |= ((input & 0x7) << 1) << (4 * highbit); 3206 td3116_latch_value(btv, value); 3207 3208 /* Enable the correct output */ 3209 value &= ~0x11; 3210 value |= ((highbit ^ 0x1) << 4) | highbit; 3211 td3116_latch_value(btv, value); 3212 } 3213 3214 /* ----------------------------------------------------------------------- */ 3215 3216 static void bttv_reset_audio(struct bttv *btv) 3217 { 3218 /* 3219 * BT878A has a audio-reset register. 3220 * 1. This register is an audio reset function but it is in 3221 * function-0 (video capture) address space. 3222 * 2. It is enough to do this once per power-up of the card. 3223 * 3. There is a typo in the Conexant doc -- it is not at 3224 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!). 3225 * --//Shrikumar 030609 3226 */ 3227 if (btv->id != 878) 3228 return; 3229 3230 if (bttv_debug) 3231 pr_debug("%d: BT878A ARESET\n", btv->c.nr); 3232 btwrite((1<<7), 0x058); 3233 udelay(10); 3234 btwrite( 0, 0x058); 3235 } 3236 3237 /* initialization part one -- before registering i2c bus */ 3238 void bttv_init_card1(struct bttv *btv) 3239 { 3240 switch (btv->c.type) { 3241 case BTTV_BOARD_HAUPPAUGE: 3242 case BTTV_BOARD_HAUPPAUGE878: 3243 boot_msp34xx(btv,5); 3244 break; 3245 case BTTV_BOARD_VOODOOTV_200: 3246 case BTTV_BOARD_VOODOOTV_FM: 3247 boot_msp34xx(btv,20); 3248 break; 3249 case BTTV_BOARD_AVERMEDIA98: 3250 boot_msp34xx(btv,11); 3251 break; 3252 case BTTV_BOARD_HAUPPAUGEPVR: 3253 pvr_boot(btv); 3254 break; 3255 case BTTV_BOARD_TWINHAN_DST: 3256 case BTTV_BOARD_AVDVBT_771: 3257 case BTTV_BOARD_PINNACLESAT: 3258 btv->use_i2c_hw = 1; 3259 break; 3260 case BTTV_BOARD_ADLINK_RTV24: 3261 init_RTV24( btv ); 3262 break; 3263 3264 } 3265 if (!bttv_tvcards[btv->c.type].has_dvb) 3266 bttv_reset_audio(btv); 3267 } 3268 3269 /* initialization part two -- after registering i2c bus */ 3270 void bttv_init_card2(struct bttv *btv) 3271 { 3272 btv->tuner_type = UNSET; 3273 3274 if (BTTV_BOARD_UNKNOWN == btv->c.type) { 3275 bttv_readee(btv,eeprom_data,0xa0); 3276 identify_by_eeprom(btv,eeprom_data); 3277 } 3278 3279 switch (btv->c.type) { 3280 case BTTV_BOARD_MIRO: 3281 case BTTV_BOARD_MIROPRO: 3282 case BTTV_BOARD_PINNACLE: 3283 case BTTV_BOARD_PINNACLEPRO: 3284 /* miro/pinnacle */ 3285 miro_pinnacle_gpio(btv); 3286 break; 3287 case BTTV_BOARD_FLYVIDEO_98: 3288 case BTTV_BOARD_MAXI: 3289 case BTTV_BOARD_LIFE_FLYKIT: 3290 case BTTV_BOARD_FLYVIDEO: 3291 case BTTV_BOARD_TYPHOON_TVIEW: 3292 case BTTV_BOARD_CHRONOS_VS2: 3293 case BTTV_BOARD_FLYVIDEO_98FM: 3294 case BTTV_BOARD_FLYVIDEO2000: 3295 case BTTV_BOARD_FLYVIDEO98EZ: 3296 case BTTV_BOARD_CONFERENCETV: 3297 case BTTV_BOARD_LIFETEC_9415: 3298 flyvideo_gpio(btv); 3299 break; 3300 case BTTV_BOARD_HAUPPAUGE: 3301 case BTTV_BOARD_HAUPPAUGE878: 3302 case BTTV_BOARD_HAUPPAUGEPVR: 3303 /* pick up some config infos from the eeprom */ 3304 bttv_readee(btv,eeprom_data,0xa0); 3305 hauppauge_eeprom(btv); 3306 break; 3307 case BTTV_BOARD_AVERMEDIA98: 3308 case BTTV_BOARD_AVPHONE98: 3309 bttv_readee(btv,eeprom_data,0xa0); 3310 avermedia_eeprom(btv); 3311 break; 3312 case BTTV_BOARD_PXC200: 3313 init_PXC200(btv); 3314 break; 3315 case BTTV_BOARD_PICOLO_TETRA_CHIP: 3316 picolo_tetra_init(btv); 3317 break; 3318 case BTTV_BOARD_VHX: 3319 btv->has_radio = 1; 3320 btv->has_matchbox = 1; 3321 btv->mbox_we = 0x20; 3322 btv->mbox_most = 0; 3323 btv->mbox_clk = 0x08; 3324 btv->mbox_data = 0x10; 3325 btv->mbox_mask = 0x38; 3326 break; 3327 case BTTV_BOARD_VOBIS_BOOSTAR: 3328 case BTTV_BOARD_TERRATV: 3329 terratec_active_radio_upgrade(btv); 3330 break; 3331 case BTTV_BOARD_MAGICTVIEW061: 3332 if (btv->cardid == 0x3002144f) { 3333 btv->has_radio=1; 3334 pr_info("%d: radio detected by subsystem id (CPH05x)\n", 3335 btv->c.nr); 3336 } 3337 break; 3338 case BTTV_BOARD_STB2: 3339 if (btv->cardid == 0x3060121a) { 3340 /* Fix up entry for 3DFX VoodooTV 100, 3341 which is an OEM STB card variant. */ 3342 btv->has_radio=0; 3343 btv->tuner_type=TUNER_TEMIC_NTSC; 3344 } 3345 break; 3346 case BTTV_BOARD_OSPREY1x0: 3347 case BTTV_BOARD_OSPREY1x0_848: 3348 case BTTV_BOARD_OSPREY101_848: 3349 case BTTV_BOARD_OSPREY1x1: 3350 case BTTV_BOARD_OSPREY1x1_SVID: 3351 case BTTV_BOARD_OSPREY2xx: 3352 case BTTV_BOARD_OSPREY2x0_SVID: 3353 case BTTV_BOARD_OSPREY2x0: 3354 case BTTV_BOARD_OSPREY440: 3355 case BTTV_BOARD_OSPREY500: 3356 case BTTV_BOARD_OSPREY540: 3357 case BTTV_BOARD_OSPREY2000: 3358 bttv_readee(btv,eeprom_data,0xa0); 3359 osprey_eeprom(btv, eeprom_data); 3360 break; 3361 case BTTV_BOARD_IDS_EAGLE: 3362 init_ids_eagle(btv); 3363 break; 3364 case BTTV_BOARD_MODTEC_205: 3365 bttv_readee(btv,eeprom_data,0xa0); 3366 modtec_eeprom(btv); 3367 break; 3368 case BTTV_BOARD_LMLBT4: 3369 init_lmlbt4x(btv); 3370 break; 3371 case BTTV_BOARD_TIBET_CS16: 3372 tibetCS16_init(btv); 3373 break; 3374 case BTTV_BOARD_KODICOM_4400R: 3375 kodicom4400r_init(btv); 3376 break; 3377 case BTTV_BOARD_GEOVISION_GV800S: 3378 gv800s_init(btv); 3379 break; 3380 } 3381 3382 /* pll configuration */ 3383 if (!(btv->id==848 && btv->revision==0x11)) { 3384 /* defaults from card list */ 3385 if (PLL_28 == bttv_tvcards[btv->c.type].pll) { 3386 btv->pll.pll_ifreq=28636363; 3387 btv->pll.pll_crystal=BT848_IFORM_XT0; 3388 } 3389 if (PLL_35 == bttv_tvcards[btv->c.type].pll) { 3390 btv->pll.pll_ifreq=35468950; 3391 btv->pll.pll_crystal=BT848_IFORM_XT1; 3392 } 3393 /* insmod options can override */ 3394 switch (pll[btv->c.nr]) { 3395 case 0: /* none */ 3396 btv->pll.pll_crystal = 0; 3397 btv->pll.pll_ifreq = 0; 3398 btv->pll.pll_ofreq = 0; 3399 break; 3400 case 1: /* 28 MHz */ 3401 case 28: 3402 btv->pll.pll_ifreq = 28636363; 3403 btv->pll.pll_ofreq = 0; 3404 btv->pll.pll_crystal = BT848_IFORM_XT0; 3405 break; 3406 case 2: /* 35 MHz */ 3407 case 35: 3408 btv->pll.pll_ifreq = 35468950; 3409 btv->pll.pll_ofreq = 0; 3410 btv->pll.pll_crystal = BT848_IFORM_XT1; 3411 break; 3412 } 3413 } 3414 btv->pll.pll_current = -1; 3415 3416 /* tuner configuration (from card list / autodetect / insmod option) */ 3417 if (UNSET != bttv_tvcards[btv->c.type].tuner_type) 3418 if (UNSET == btv->tuner_type) 3419 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type; 3420 if (UNSET != tuner[btv->c.nr]) 3421 btv->tuner_type = tuner[btv->c.nr]; 3422 3423 if (btv->tuner_type == TUNER_ABSENT) 3424 pr_info("%d: tuner absent\n", btv->c.nr); 3425 else if (btv->tuner_type == UNSET) 3426 pr_warn("%d: tuner type unset\n", btv->c.nr); 3427 else 3428 pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type); 3429 3430 if (autoload != UNSET) { 3431 pr_warn("%d: the autoload option is obsolete\n", btv->c.nr); 3432 pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n", 3433 btv->c.nr); 3434 } 3435 3436 if (UNSET == btv->tuner_type) 3437 btv->tuner_type = TUNER_ABSENT; 3438 3439 btv->dig = bttv_tvcards[btv->c.type].has_dig_in ? 3440 bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET; 3441 btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ? 3442 UNSET : bttv_tvcards[btv->c.type].svhs; 3443 if (svhs[btv->c.nr] != UNSET) 3444 btv->svhs = svhs[btv->c.nr]; 3445 if (remote[btv->c.nr] != UNSET) 3446 btv->has_remote = remote[btv->c.nr]; 3447 3448 if (bttv_tvcards[btv->c.type].has_radio) 3449 btv->has_radio = 1; 3450 if (bttv_tvcards[btv->c.type].has_remote) 3451 btv->has_remote = 1; 3452 if (!bttv_tvcards[btv->c.type].no_gpioirq) 3453 btv->gpioirq = 1; 3454 if (bttv_tvcards[btv->c.type].volume_gpio) 3455 btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio; 3456 if (bttv_tvcards[btv->c.type].audio_mode_gpio) 3457 btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio; 3458 3459 if (btv->tuner_type == TUNER_ABSENT) 3460 return; /* no tuner or related drivers to load */ 3461 3462 if (btv->has_saa6588 || saa6588[btv->c.nr]) { 3463 /* Probe for RDS receiver chip */ 3464 static const unsigned short addrs[] = { 3465 0x20 >> 1, 3466 0x22 >> 1, 3467 I2C_CLIENT_END 3468 }; 3469 struct v4l2_subdev *sd; 3470 3471 sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3472 &btv->c.i2c_adap, "saa6588", 0, addrs); 3473 btv->has_saa6588 = (sd != NULL); 3474 } 3475 3476 /* try to detect audio/fader chips */ 3477 3478 /* First check if the user specified the audio chip via a module 3479 option. */ 3480 3481 switch (audiodev[btv->c.nr]) { 3482 case -1: 3483 return; /* do not load any audio module */ 3484 3485 case 0: /* autodetect */ 3486 break; 3487 3488 case 1: { 3489 /* The user specified that we should probe for msp3400 */ 3490 static const unsigned short addrs[] = { 3491 I2C_ADDR_MSP3400 >> 1, 3492 I2C_ADDR_MSP3400_ALT >> 1, 3493 I2C_CLIENT_END 3494 }; 3495 3496 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3497 &btv->c.i2c_adap, "msp3400", 0, addrs); 3498 if (btv->sd_msp34xx) 3499 return; 3500 goto no_audio; 3501 } 3502 3503 case 2: { 3504 /* The user specified that we should probe for tda7432 */ 3505 static const unsigned short addrs[] = { 3506 I2C_ADDR_TDA7432 >> 1, 3507 I2C_CLIENT_END 3508 }; 3509 3510 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3511 &btv->c.i2c_adap, "tda7432", 0, addrs)) 3512 return; 3513 goto no_audio; 3514 } 3515 3516 case 3: { 3517 /* The user specified that we should probe for tvaudio */ 3518 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3519 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); 3520 if (btv->sd_tvaudio) 3521 return; 3522 goto no_audio; 3523 } 3524 3525 default: 3526 pr_warn("%d: unknown audiodev value!\n", btv->c.nr); 3527 return; 3528 } 3529 3530 /* There were no overrides, so now we try to discover this through the 3531 card definition */ 3532 3533 /* probe for msp3400 first: this driver can detect whether or not 3534 it really is a msp3400, so it will return NULL when the device 3535 found is really something else (e.g. a tea6300). */ 3536 if (!bttv_tvcards[btv->c.type].no_msp34xx) { 3537 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3538 &btv->c.i2c_adap, "msp3400", 3539 0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1)); 3540 } else if (bttv_tvcards[btv->c.type].msp34xx_alt) { 3541 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3542 &btv->c.i2c_adap, "msp3400", 3543 0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1)); 3544 } 3545 3546 /* If we found a msp34xx, then we're done. */ 3547 if (btv->sd_msp34xx) 3548 return; 3549 3550 /* it might also be a tda7432. */ 3551 if (!bttv_tvcards[btv->c.type].no_tda7432) { 3552 static const unsigned short addrs[] = { 3553 I2C_ADDR_TDA7432 >> 1, 3554 I2C_CLIENT_END 3555 }; 3556 3557 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3558 &btv->c.i2c_adap, "tda7432", 0, addrs)) 3559 return; 3560 } 3561 3562 /* Now see if we can find one of the tvaudio devices. */ 3563 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3564 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); 3565 if (btv->sd_tvaudio) 3566 return; 3567 3568 no_audio: 3569 pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr); 3570 } 3571 3572 3573 /* initialize the tuner */ 3574 void bttv_init_tuner(struct bttv *btv) 3575 { 3576 int addr = ADDR_UNSET; 3577 3578 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr) 3579 addr = bttv_tvcards[btv->c.type].tuner_addr; 3580 3581 if (btv->tuner_type != TUNER_ABSENT) { 3582 struct tuner_setup tun_setup; 3583 3584 /* Load tuner module before issuing tuner config call! */ 3585 if (btv->has_radio) 3586 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3587 &btv->c.i2c_adap, "tuner", 3588 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO)); 3589 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3590 &btv->c.i2c_adap, "tuner", 3591 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); 3592 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3593 &btv->c.i2c_adap, "tuner", 3594 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD)); 3595 3596 tun_setup.mode_mask = T_ANALOG_TV; 3597 tun_setup.type = btv->tuner_type; 3598 tun_setup.addr = addr; 3599 3600 if (btv->has_radio) 3601 tun_setup.mode_mask |= T_RADIO; 3602 3603 bttv_call_all(btv, tuner, s_type_addr, &tun_setup); 3604 } 3605 3606 if (btv->tda9887_conf) { 3607 struct v4l2_priv_tun_config tda9887_cfg; 3608 3609 tda9887_cfg.tuner = TUNER_TDA9887; 3610 tda9887_cfg.priv = &btv->tda9887_conf; 3611 3612 bttv_call_all(btv, tuner, s_config, &tda9887_cfg); 3613 } 3614 } 3615 3616 /* ----------------------------------------------------------------------- */ 3617 3618 static void modtec_eeprom(struct bttv *btv) 3619 { 3620 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) { 3621 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I; 3622 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", 3623 btv->c.nr, &eeprom_data[0x1e]); 3624 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) { 3625 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I; 3626 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", 3627 btv->c.nr, &eeprom_data[0x1e]); 3628 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) { 3629 btv->tuner_type=TUNER_PHILIPS_NTSC; 3630 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", 3631 btv->c.nr, &eeprom_data[0x1e]); 3632 } else { 3633 pr_info("%d: Modtec: Unknown TunerString: %s\n", 3634 btv->c.nr, &eeprom_data[0x1e]); 3635 } 3636 } 3637 3638 static void hauppauge_eeprom(struct bttv *btv) 3639 { 3640 struct tveeprom tv; 3641 3642 tveeprom_hauppauge_analog(&btv->i2c_client, &tv, eeprom_data); 3643 btv->tuner_type = tv.tuner_type; 3644 btv->has_radio = tv.has_radio; 3645 3646 pr_info("%d: Hauppauge eeprom indicates model#%d\n", 3647 btv->c.nr, tv.model); 3648 3649 /* 3650 * Some of the 878 boards have duplicate PCI IDs. Switch the board 3651 * type based on model #. 3652 */ 3653 if(tv.model == 64900) { 3654 pr_info("%d: Switching board type from %s to %s\n", 3655 btv->c.nr, 3656 bttv_tvcards[btv->c.type].name, 3657 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name); 3658 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB; 3659 } 3660 3661 /* The 61334 needs the msp3410 to do the radio demod to get sound */ 3662 if (tv.model == 61334) 3663 btv->radio_uses_msp_demodulator = 1; 3664 } 3665 3666 static int terratec_active_radio_upgrade(struct bttv *btv) 3667 { 3668 int freq; 3669 3670 btv->has_radio = 1; 3671 btv->has_matchbox = 1; 3672 btv->mbox_we = 0x10; 3673 btv->mbox_most = 0x20; 3674 btv->mbox_clk = 0x08; 3675 btv->mbox_data = 0x04; 3676 btv->mbox_mask = 0x3c; 3677 3678 btv->mbox_iow = 1 << 8; 3679 btv->mbox_ior = 1 << 9; 3680 btv->mbox_csel = 1 << 10; 3681 3682 freq=88000/62.5; 3683 tea5757_write(btv, 5 * freq + 0x358); /* write 0x1ed8 */ 3684 if (0x1ed8 == tea5757_read(btv)) { 3685 pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr); 3686 btv->has_radio = 1; 3687 btv->has_saa6588 = 1; 3688 btv->has_matchbox = 1; 3689 } else { 3690 btv->has_radio = 0; 3691 btv->has_matchbox = 0; 3692 } 3693 return 0; 3694 } 3695 3696 3697 /* ----------------------------------------------------------------------- */ 3698 3699 /* 3700 * minimal bootstrap for the WinTV/PVR -- upload altera firmware. 3701 * 3702 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have 3703 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be 3704 * unpacked with unzip). 3705 */ 3706 #define PVR_GPIO_DELAY 10 3707 3708 #define BTTV_ALT_DATA 0x000001 3709 #define BTTV_ALT_DCLK 0x100000 3710 #define BTTV_ALT_NCONFIG 0x800000 3711 3712 static int pvr_altera_load(struct bttv *btv, const u8 *micro, u32 microlen) 3713 { 3714 u32 n; 3715 u8 bits; 3716 int i; 3717 3718 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG); 3719 gpio_write(0); 3720 udelay(PVR_GPIO_DELAY); 3721 3722 gpio_write(BTTV_ALT_NCONFIG); 3723 udelay(PVR_GPIO_DELAY); 3724 3725 for (n = 0; n < microlen; n++) { 3726 bits = micro[n]; 3727 for (i = 0 ; i < 8 ; i++) { 3728 gpio_bits(BTTV_ALT_DCLK,0); 3729 if (bits & 0x01) 3730 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA); 3731 else 3732 gpio_bits(BTTV_ALT_DATA,0); 3733 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); 3734 bits >>= 1; 3735 } 3736 } 3737 gpio_bits(BTTV_ALT_DCLK,0); 3738 udelay(PVR_GPIO_DELAY); 3739 3740 /* begin Altera init loop (Not necessary,but doesn't hurt) */ 3741 for (i = 0 ; i < 30 ; i++) { 3742 gpio_bits(BTTV_ALT_DCLK,0); 3743 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); 3744 } 3745 gpio_bits(BTTV_ALT_DCLK,0); 3746 return 0; 3747 } 3748 3749 static int pvr_boot(struct bttv *btv) 3750 { 3751 const struct firmware *fw_entry; 3752 int rc; 3753 3754 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev); 3755 if (rc != 0) { 3756 pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr); 3757 return rc; 3758 } 3759 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size); 3760 pr_info("%d: altera firmware upload %s\n", 3761 btv->c.nr, (rc < 0) ? "failed" : "ok"); 3762 release_firmware(fw_entry); 3763 return rc; 3764 } 3765 3766 /* ----------------------------------------------------------------------- */ 3767 /* some osprey specific stuff */ 3768 3769 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]) 3770 { 3771 int i; 3772 u32 serial = 0; 3773 int cardid = -1; 3774 3775 /* This code will nevery actually get called in this case.... */ 3776 if (btv->c.type == BTTV_BOARD_UNKNOWN) { 3777 /* this might be an antique... check for MMAC label in eeprom */ 3778 if (!strncmp(ee, "MMAC", 4)) { 3779 u8 checksum = 0; 3780 for (i = 0; i < 21; i++) 3781 checksum += ee[i]; 3782 if (checksum != ee[21]) 3783 return; 3784 cardid = BTTV_BOARD_OSPREY1x0_848; 3785 for (i = 12; i < 21; i++) 3786 serial *= 10, serial += ee[i] - '0'; 3787 } 3788 } else { 3789 unsigned short type; 3790 3791 for (i = 4*16; i < 8*16; i += 16) { 3792 u16 checksum = ip_compute_csum(ee + i, 16); 3793 3794 if ((checksum&0xff) + (checksum>>8) == 0xff) 3795 break; 3796 } 3797 if (i >= 8*16) 3798 return; 3799 ee += i; 3800 3801 /* found a valid descriptor */ 3802 type = get_unaligned_be16((__be16 *)(ee+4)); 3803 3804 switch(type) { 3805 /* 848 based */ 3806 case 0x0004: 3807 cardid = BTTV_BOARD_OSPREY1x0_848; 3808 break; 3809 case 0x0005: 3810 cardid = BTTV_BOARD_OSPREY101_848; 3811 break; 3812 3813 /* 878 based */ 3814 case 0x0012: 3815 case 0x0013: 3816 cardid = BTTV_BOARD_OSPREY1x0; 3817 break; 3818 case 0x0014: 3819 case 0x0015: 3820 cardid = BTTV_BOARD_OSPREY1x1; 3821 break; 3822 case 0x0016: 3823 case 0x0017: 3824 case 0x0020: 3825 cardid = BTTV_BOARD_OSPREY1x1_SVID; 3826 break; 3827 case 0x0018: 3828 case 0x0019: 3829 case 0x001E: 3830 case 0x001F: 3831 cardid = BTTV_BOARD_OSPREY2xx; 3832 break; 3833 case 0x001A: 3834 case 0x001B: 3835 cardid = BTTV_BOARD_OSPREY2x0_SVID; 3836 break; 3837 case 0x0040: 3838 cardid = BTTV_BOARD_OSPREY500; 3839 break; 3840 case 0x0050: 3841 case 0x0056: 3842 cardid = BTTV_BOARD_OSPREY540; 3843 /* bttv_osprey_540_init(btv); */ 3844 break; 3845 case 0x0060: 3846 case 0x0070: 3847 case 0x00A0: 3848 cardid = BTTV_BOARD_OSPREY2x0; 3849 /* enable output on select control lines */ 3850 gpio_inout(0xffffff,0x000303); 3851 break; 3852 case 0x00D8: 3853 cardid = BTTV_BOARD_OSPREY440; 3854 break; 3855 default: 3856 /* unknown...leave generic, but get serial # */ 3857 pr_info("%d: osprey eeprom: unknown card type 0x%04x\n", 3858 btv->c.nr, type); 3859 break; 3860 } 3861 serial = get_unaligned_be32((__be32 *)(ee+6)); 3862 } 3863 3864 pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n", 3865 btv->c.nr, cardid, 3866 cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial); 3867 3868 if (cardid<0 || btv->c.type == cardid) 3869 return; 3870 3871 /* card type isn't set correctly */ 3872 if (card[btv->c.nr] < bttv_num_tvcards) { 3873 pr_warn("%d: osprey eeprom: Not overriding user specified card type\n", 3874 btv->c.nr); 3875 } else { 3876 pr_info("%d: osprey eeprom: Changing card type from %d to %d\n", 3877 btv->c.nr, btv->c.type, cardid); 3878 btv->c.type = cardid; 3879 } 3880 } 3881 3882 /* ----------------------------------------------------------------------- */ 3883 /* AVermedia specific stuff, from bktr_card.c */ 3884 3885 static int tuner_0_table[] = { 3886 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/, 3887 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/, 3888 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL, 3889 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM, 3890 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL, 3891 TUNER_PHILIPS_FM1216ME_MK3 }; 3892 3893 static int tuner_1_table[] = { 3894 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL, 3895 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, 3896 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, 3897 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */ 3898 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL}; 3899 3900 static void avermedia_eeprom(struct bttv *btv) 3901 { 3902 int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0; 3903 3904 tuner_make = (eeprom_data[0x41] & 0x7); 3905 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3; 3906 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4; 3907 btv->has_remote = (eeprom_data[0x42] & 0x01); 3908 3909 if (tuner_make == 0 || tuner_make == 2) 3910 if (tuner_format <= 0x0a) 3911 tuner_type = tuner_0_table[tuner_format]; 3912 if (tuner_make == 1) 3913 if (tuner_format <= 9) 3914 tuner_type = tuner_1_table[tuner_format]; 3915 3916 if (tuner_make == 4) 3917 if (tuner_format == 0x09) 3918 tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */ 3919 3920 pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=", 3921 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]); 3922 if (tuner_type) { 3923 btv->tuner_type = tuner_type; 3924 pr_cont("%d", tuner_type); 3925 } else 3926 pr_cont("Unknown type"); 3927 pr_cont(" radio:%s remote control:%s\n", 3928 tuner_tv_fm ? "yes" : "no", 3929 btv->has_remote ? "yes" : "no"); 3930 } 3931 3932 /* 3933 * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880 3934 * analog demod, which is not I2C controlled like the newer and more common 3935 * TDA9887 series. Instead is has two tri-state input pins, S0 and S1, 3936 * that control the IF for the video and audio. Apparently, bttv GPIO 3937 * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I 3938 * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC). 3939 */ 3940 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits) 3941 { 3942 3943 if (btv->audio == TVAUDIO_INPUT_TUNER) { 3944 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN) 3945 gpiobits |= 0x10000; 3946 else 3947 gpiobits &= ~0x10000; 3948 } 3949 3950 gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits); 3951 return gpiobits; 3952 } 3953 3954 3955 /* 3956 * reset/enable the MSP on some Hauppauge cards 3957 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)! 3958 * 3959 * Hauppauge: pin 5 3960 * Voodoo: pin 20 3961 */ 3962 static void boot_msp34xx(struct bttv *btv, int pin) 3963 { 3964 int mask = (1 << pin); 3965 3966 gpio_inout(mask,mask); 3967 gpio_bits(mask,0); 3968 mdelay(2); 3969 udelay(500); 3970 gpio_bits(mask,mask); 3971 3972 if (bttv_gpio) 3973 bttv_gpio_tracking(btv,"msp34xx"); 3974 if (bttv_verbose) 3975 pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n", 3976 btv->c.nr, pin); 3977 } 3978 3979 /* ----------------------------------------------------------------------- */ 3980 /* Imagenation L-Model PXC200 Framegrabber */ 3981 /* This is basically the same procedure as 3982 * used by Alessandro Rubini in his pxc200 3983 * driver, but using BTTV functions */ 3984 3985 static void init_PXC200(struct bttv *btv) 3986 { 3987 static int vals[] = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02, 3988 0x03, 0x04, 0x05, 0x06, 0x00 }; 3989 unsigned int i; 3990 int tmp; 3991 u32 val; 3992 3993 /* Initialise GPIO-connevted stuff */ 3994 gpio_inout(0xffffff, (1<<13)); 3995 gpio_write(0); 3996 udelay(3); 3997 gpio_write(1<<13); 3998 /* GPIO inputs are pulled up, so no need to drive 3999 * reset pin any longer */ 4000 gpio_bits(0xffffff, 0); 4001 if (bttv_gpio) 4002 bttv_gpio_tracking(btv,"pxc200"); 4003 4004 /* we could/should try and reset/control the AD pots? but 4005 right now we simply turned off the crushing. Without 4006 this the AGC drifts drifts 4007 remember the EN is reverse logic --> 4008 setting BT848_ADC_AGC_EN disable the AGC 4009 tboult@eecs.lehigh.edu 4010 */ 4011 4012 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC); 4013 4014 /* Initialise MAX517 DAC */ 4015 pr_info("Setting DAC reference voltage level ...\n"); 4016 bttv_I2CWrite(btv,0x5E,0,0x80,1); 4017 4018 /* Initialise 12C508 PIC */ 4019 /* The I2CWrite and I2CRead commmands are actually to the 4020 * same chips - but the R/W bit is included in the address 4021 * argument so the numbers are different */ 4022 4023 4024 pr_info("Initialising 12C508 PIC chip ...\n"); 4025 4026 /* First of all, enable the clock line. This is used in the PXC200-F */ 4027 val = btread(BT848_GPIO_DMA_CTL); 4028 val |= BT848_GPIO_DMA_CTL_GPCLKMODE; 4029 btwrite(val, BT848_GPIO_DMA_CTL); 4030 4031 /* Then, push to 0 the reset pin long enough to reset the * 4032 * device same as above for the reset line, but not the same 4033 * value sent to the GPIO-connected stuff 4034 * which one is the good one? */ 4035 gpio_inout(0xffffff,(1<<2)); 4036 gpio_write(0); 4037 udelay(10); 4038 gpio_write(1<<2); 4039 4040 for (i = 0; i < ARRAY_SIZE(vals); i++) { 4041 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1); 4042 if (tmp != -1) { 4043 pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n", 4044 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL)); 4045 } 4046 } 4047 4048 pr_info("PXC200 Initialised\n"); 4049 } 4050 4051 4052 4053 /* ----------------------------------------------------------------------- */ 4054 /* 4055 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock 4056 * it. This apparently involves the following procedure for each 878 chip: 4057 * 4058 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register 4059 * 4060 * 2) write to GPIO_DATA 4061 * - 0x0E 4062 * - sleep 1ms 4063 * - 0x10 + 0x0E 4064 * - sleep 10ms 4065 * - 0x0E 4066 * read from GPIO_DATA into buf (uint_32) 4067 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 ) 4068 * error. ERROR_CPLD_Check_Failed stop. 4069 * 4070 * 3) write to GPIO_DATA 4071 * - write 0x4400 + 0x0E 4072 * - sleep 10ms 4073 * - write 0x4410 + 0x0E 4074 * - sleep 1ms 4075 * - write 0x0E 4076 * read from GPIO_DATA into buf (uint_32) 4077 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 ) 4078 * error. ERROR_CPLD_Check_Failed. 4079 */ 4080 /* ----------------------------------------------------------------------- */ 4081 static void 4082 init_RTV24 (struct bttv *btv) 4083 { 4084 uint32_t dataRead = 0; 4085 long watchdog_value = 0x0E; 4086 4087 pr_info("%d: Adlink RTV-24 initialisation in progress ...\n", 4088 btv->c.nr); 4089 4090 btwrite (0x00c3feff, BT848_GPIO_OUT_EN); 4091 4092 btwrite (0 + watchdog_value, BT848_GPIO_DATA); 4093 msleep (1); 4094 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA); 4095 msleep (10); 4096 btwrite (0 + watchdog_value, BT848_GPIO_DATA); 4097 4098 dataRead = btread (BT848_GPIO_DATA); 4099 4100 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) { 4101 pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n", 4102 btv->c.nr, dataRead); 4103 } 4104 4105 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA); 4106 msleep (10); 4107 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA); 4108 msleep (1); 4109 btwrite (watchdog_value, BT848_GPIO_DATA); 4110 msleep (1); 4111 dataRead = btread (BT848_GPIO_DATA); 4112 4113 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) { 4114 pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n", 4115 btv->c.nr, dataRead); 4116 4117 return; 4118 } 4119 4120 pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr); 4121 } 4122 4123 4124 4125 /* ----------------------------------------------------------------------- */ 4126 /* Miro Pro radio stuff -- the tea5757 is connected to some GPIO ports */ 4127 /* 4128 * Copyright (c) 1999 Csaba Halasz <qgehali@uni-miskolc.hu> 4129 * This code is placed under the terms of the GNU General Public License 4130 * 4131 * Brutally hacked by Dan Sheridan <dan.sheridan@contact.org.uk> djs52 8/3/00 4132 */ 4133 4134 static void bus_low(struct bttv *btv, int bit) 4135 { 4136 if (btv->mbox_ior) { 4137 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, 4138 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); 4139 udelay(5); 4140 } 4141 4142 gpio_bits(bit,0); 4143 udelay(5); 4144 4145 if (btv->mbox_ior) { 4146 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); 4147 udelay(5); 4148 } 4149 } 4150 4151 static void bus_high(struct bttv *btv, int bit) 4152 { 4153 if (btv->mbox_ior) { 4154 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, 4155 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); 4156 udelay(5); 4157 } 4158 4159 gpio_bits(bit,bit); 4160 udelay(5); 4161 4162 if (btv->mbox_ior) { 4163 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); 4164 udelay(5); 4165 } 4166 } 4167 4168 static int bus_in(struct bttv *btv, int bit) 4169 { 4170 if (btv->mbox_ior) { 4171 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, 4172 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); 4173 udelay(5); 4174 4175 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); 4176 udelay(5); 4177 } 4178 return gpio_read() & (bit); 4179 } 4180 4181 /* TEA5757 register bits */ 4182 #define TEA_FREQ 0:14 4183 #define TEA_BUFFER 15:15 4184 4185 #define TEA_SIGNAL_STRENGTH 16:17 4186 4187 #define TEA_PORT1 18:18 4188 #define TEA_PORT0 19:19 4189 4190 #define TEA_BAND 20:21 4191 #define TEA_BAND_FM 0 4192 #define TEA_BAND_MW 1 4193 #define TEA_BAND_LW 2 4194 #define TEA_BAND_SW 3 4195 4196 #define TEA_MONO 22:22 4197 #define TEA_ALLOW_STEREO 0 4198 #define TEA_FORCE_MONO 1 4199 4200 #define TEA_SEARCH_DIRECTION 23:23 4201 #define TEA_SEARCH_DOWN 0 4202 #define TEA_SEARCH_UP 1 4203 4204 #define TEA_STATUS 24:24 4205 #define TEA_STATUS_TUNED 0 4206 #define TEA_STATUS_SEARCHING 1 4207 4208 /* Low-level stuff */ 4209 static int tea5757_read(struct bttv *btv) 4210 { 4211 unsigned long timeout; 4212 int value = 0; 4213 int i; 4214 4215 /* better safe than sorry */ 4216 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we); 4217 4218 if (btv->mbox_ior) { 4219 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, 4220 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); 4221 udelay(5); 4222 } 4223 4224 if (bttv_gpio) 4225 bttv_gpio_tracking(btv,"tea5757 read"); 4226 4227 bus_low(btv,btv->mbox_we); 4228 bus_low(btv,btv->mbox_clk); 4229 4230 udelay(10); 4231 timeout= jiffies + msecs_to_jiffies(1000); 4232 4233 /* wait for DATA line to go low; error if it doesn't */ 4234 while (bus_in(btv,btv->mbox_data) && time_before(jiffies, timeout)) 4235 schedule(); 4236 if (bus_in(btv,btv->mbox_data)) { 4237 pr_warn("%d: tea5757: read timeout\n", btv->c.nr); 4238 return -1; 4239 } 4240 4241 dprintk("%d: tea5757:", btv->c.nr); 4242 for (i = 0; i < 24; i++) { 4243 udelay(5); 4244 bus_high(btv,btv->mbox_clk); 4245 udelay(5); 4246 dprintk_cont("%c", 4247 bus_in(btv, btv->mbox_most) == 0 ? 'T' : '-'); 4248 bus_low(btv,btv->mbox_clk); 4249 value <<= 1; 4250 value |= (bus_in(btv,btv->mbox_data) == 0)?0:1; /* MSB first */ 4251 dprintk_cont("%c", 4252 bus_in(btv, btv->mbox_most) == 0 ? 'S' : 'M'); 4253 } 4254 dprintk_cont("\n"); 4255 dprintk("%d: tea5757: read 0x%X\n", btv->c.nr, value); 4256 return value; 4257 } 4258 4259 static int tea5757_write(struct bttv *btv, int value) 4260 { 4261 int i; 4262 int reg = value; 4263 4264 gpio_inout(btv->mbox_mask, btv->mbox_clk | btv->mbox_we | btv->mbox_data); 4265 4266 if (btv->mbox_ior) { 4267 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, 4268 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); 4269 udelay(5); 4270 } 4271 if (bttv_gpio) 4272 bttv_gpio_tracking(btv,"tea5757 write"); 4273 4274 dprintk("%d: tea5757: write 0x%X\n", btv->c.nr, value); 4275 bus_low(btv,btv->mbox_clk); 4276 bus_high(btv,btv->mbox_we); 4277 for (i = 0; i < 25; i++) { 4278 if (reg & 0x1000000) 4279 bus_high(btv,btv->mbox_data); 4280 else 4281 bus_low(btv,btv->mbox_data); 4282 reg <<= 1; 4283 bus_high(btv,btv->mbox_clk); 4284 udelay(10); 4285 bus_low(btv,btv->mbox_clk); 4286 udelay(10); 4287 } 4288 bus_low(btv,btv->mbox_we); /* unmute !!! */ 4289 return 0; 4290 } 4291 4292 void tea5757_set_freq(struct bttv *btv, unsigned short freq) 4293 { 4294 dprintk("tea5757_set_freq %d\n",freq); 4295 tea5757_write(btv, 5 * freq + 0x358); /* add 10.7MHz (see docs) */ 4296 } 4297 4298 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas] 4299 * 4300 * This is needed because rv605 don't use a normal multiplex, but a crosspoint 4301 * switch instead (CD22M3494E). This IC can have multiple active connections 4302 * between Xn (input) and Yn (output) pins. We need to clear any existing 4303 * connection prior to establish a new one, pulsing the STROBE pin. 4304 * 4305 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin. 4306 * GPIO pins are wired as: 4307 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller) 4308 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller) 4309 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller) 4310 * GPIO[8] - - P3[5] (microcontroller) 4311 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller) 4312 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller) 4313 * GPINTR - - P3[4] (microcontroller) 4314 * 4315 * The microcontroller is a 80C32 like. It should be possible to change xpoint 4316 * configuration either directly (as we are doing) or using the microcontroller 4317 * which is also wired to I2C interface. I have no further info on the 4318 * microcontroller features, one would need to disassembly the firmware. 4319 * note: the vendor refused to give any information on this product, all 4320 * that stuff was found using a multimeter! :) 4321 */ 4322 static void rv605_muxsel(struct bttv *btv, unsigned int input) 4323 { 4324 static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0, 4325 0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa }; 4326 4327 gpio_bits(0x07f, muxgpio[input]); 4328 4329 /* reset all conections */ 4330 gpio_bits(0x200,0x200); 4331 mdelay(1); 4332 gpio_bits(0x200,0x000); 4333 mdelay(1); 4334 4335 /* create a new connection */ 4336 gpio_bits(0x480,0x480); 4337 mdelay(1); 4338 gpio_bits(0x480,0x080); 4339 mdelay(1); 4340 } 4341 4342 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning] 4343 * 4344 * The CS16 (available on eBay cheap) is a PCI board with four Fusion 4345 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator 4346 * chips, ten eight input analog multiplexors, a not chip and a few 4347 * other components. 4348 * 4349 * 16 inputs on a secondary bracket are provided and can be selected 4350 * from each of the four capture chips. Two of the eight input 4351 * multiplexors are used to select from any of the 16 input signals. 4352 * 4353 * Unsupported hardware capabilities: 4354 * . A video output monitor on the secondary bracket can be selected from 4355 * one of the 878A chips. 4356 * . Another passthrough but I haven't spent any time investigating it. 4357 * . Digital I/O (logic level connected to GPIO) is available from an 4358 * onboard header. 4359 * 4360 * The on chip input mux should always be set to 2. 4361 * GPIO[16:19] - Video input selection 4362 * GPIO[0:3] - Video output monitor select (only available from one 878A) 4363 * GPIO[?:?] - Digital I/O. 4364 * 4365 * There is an ATMEL microcontroller with an 8031 core on board. I have not 4366 * determined what function (if any) it provides. With the microcontroller 4367 * and sync separator chips a guess is that it might have to do with video 4368 * switching and maybe some digital I/O. 4369 */ 4370 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input) 4371 { 4372 /* video mux */ 4373 gpio_bits(0x0f0000, input << 16); 4374 } 4375 4376 static void tibetCS16_init(struct bttv *btv) 4377 { 4378 /* enable gpio bits, mask obtained via btSpy */ 4379 gpio_inout(0xffffff, 0x0f7fff); 4380 gpio_write(0x0f7fff); 4381 } 4382 4383 /* 4384 * The following routines for the Kodicom-4400r get a little mind-twisting. 4385 * There is a "master" controller and three "slave" controllers, together 4386 * an analog switch which connects any of 16 cameras to any of the BT87A's. 4387 * The analog switch is controlled by the "master", but the detection order 4388 * of the four BT878A chips is in an order which I just don't understand. 4389 * The "master" is actually the second controller to be detected. The 4390 * logic on the board uses logical numbers for the 4 controllers, but 4391 * those numbers are different from the detection sequence. When working 4392 * with the analog switch, we need to "map" from the detection sequence 4393 * over to the board's logical controller number. This mapping sequence 4394 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical 4395 * unit 3, the second (which is the master) is logical unit 0, etc. 4396 * We need to maintain the status of the analog switch (which of the 16 4397 * cameras is connected to which of the 4 controllers). Rather than 4398 * add to the bttv structure for this, we use the data reserved for 4399 * the mbox (unused for this card type). 4400 */ 4401 4402 /* 4403 * First a routine to set the analog switch, which controls which camera 4404 * is routed to which controller. The switch comprises an X-address 4405 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a 4406 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3). 4407 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables 4408 * the switch. A STROBE bit (gpio bit 8) latches the data value into the 4409 * specified address. The idea is to set the address and data, then bring 4410 * STROBE high, and finally bring STROBE back to low. 4411 */ 4412 static void kodicom4400r_write(struct bttv *btv, 4413 unsigned char xaddr, 4414 unsigned char yaddr, 4415 unsigned char data) { 4416 unsigned int udata; 4417 4418 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf); 4419 gpio_bits(0x1ff, udata); /* write ADDR and DAT */ 4420 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */ 4421 gpio_bits(0x1ff, udata); /* strobe low */ 4422 } 4423 4424 /* 4425 * Next the mux select. Both the "master" and "slave" 'cards' (controllers) 4426 * use this routine. The routine finds the "master" for the card, maps 4427 * the controller number from the detected position over to the logical 4428 * number, writes the appropriate data to the analog switch, and housekeeps 4429 * the local copy of the switch information. The parameter 'input' is the 4430 * requested camera number (0 - 15). 4431 */ 4432 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input) 4433 { 4434 char *sw_status; 4435 int xaddr, yaddr; 4436 struct bttv *mctlr; 4437 static unsigned char map[4] = {3, 0, 2, 1}; 4438 4439 mctlr = master[btv->c.nr]; 4440 if (mctlr == NULL) { /* ignore if master not yet detected */ 4441 return; 4442 } 4443 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */ 4444 yaddr = map[yaddr]; 4445 sw_status = (char *)(&mctlr->mbox_we); 4446 xaddr = input & 0xf; 4447 /* Check if the controller/camera pair has changed, else ignore */ 4448 if (sw_status[yaddr] != xaddr) 4449 { 4450 /* "open" the old switch, "close" the new one, save the new */ 4451 kodicom4400r_write(mctlr, sw_status[yaddr], yaddr, 0); 4452 sw_status[yaddr] = xaddr; 4453 kodicom4400r_write(mctlr, xaddr, yaddr, 1); 4454 } 4455 } 4456 4457 /* 4458 * During initialisation, we need to reset the analog switch. We 4459 * also preset the switch to map the 4 connectors on the card to the 4460 * *user's* (see above description of kodicom4400r_muxsel) channels 4461 * 0 through 3 4462 */ 4463 static void kodicom4400r_init(struct bttv *btv) 4464 { 4465 char *sw_status = (char *)(&btv->mbox_we); 4466 int ix; 4467 4468 gpio_inout(0x0003ff, 0x0003ff); 4469 gpio_write(1 << 9); /* reset MUX */ 4470 gpio_write(0); 4471 /* Preset camera 0 to the 4 controllers */ 4472 for (ix = 0; ix < 4; ix++) { 4473 sw_status[ix] = ix; 4474 kodicom4400r_write(btv, ix, ix, 1); 4475 } 4476 /* 4477 * Since this is the "master", we need to set up the 4478 * other three controller chips' pointers to this structure 4479 * for later use in the muxsel routine. 4480 */ 4481 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3)) 4482 return; 4483 master[btv->c.nr-1] = btv; 4484 master[btv->c.nr] = btv; 4485 master[btv->c.nr+1] = btv; 4486 master[btv->c.nr+2] = btv; 4487 } 4488 4489 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel 4490 * video multiplexers to provide up to 16 video inputs. These 4491 * multiplexers are controlled by the lower 8 GPIO pins of the 4492 * bt878. The multiplexers probably Pericom PI5V331Q or similar. 4493 4494 * xxx0 is pin xxx of multiplexer U5, 4495 * yyy1 is pin yyy of multiplexer U2 4496 */ 4497 #define ENA0 0x01 4498 #define ENB0 0x02 4499 #define ENA1 0x04 4500 #define ENB1 0x08 4501 4502 #define IN10 0x10 4503 #define IN00 0x20 4504 #define IN11 0x40 4505 #define IN01 0x80 4506 4507 static void xguard_muxsel(struct bttv *btv, unsigned int input) 4508 { 4509 static const int masks[] = { 4510 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10, 4511 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10, 4512 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11, 4513 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11, 4514 }; 4515 gpio_write(masks[input%16]); 4516 } 4517 static void picolo_tetra_init(struct bttv *btv) 4518 { 4519 /*This is the video input redirection fonctionality : I DID NOT USED IT. */ 4520 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */ 4521 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/ 4522 } 4523 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input) 4524 { 4525 4526 dprintk("%d : picolo_tetra_muxsel => input = %d\n", btv->c.nr, input); 4527 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/ 4528 /*GPIO[20]&GPIO[21] used to choose the right input*/ 4529 btwrite (input<<20,BT848_GPIO_DATA); 4530 4531 } 4532 4533 /* 4534 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>] 4535 * 4536 * The IVC120G security card has 4 i2c controlled TDA8540 matrix 4537 * swichers to provide 16 channels to MUX0. The TDA8540's have 4538 * 4 independent outputs and as such the IVC120G also has the 4539 * optional "Monitor Out" bus. This allows the card to be looking 4540 * at one input while the monitor is looking at another. 4541 * 4542 * Since I've couldn't be bothered figuring out how to add an 4543 * independent muxsel for the monitor bus, I've just set it to 4544 * whatever the card is looking at. 4545 * 4546 * OUT0 of the TDA8540's is connected to MUX0 (0x03) 4547 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C) 4548 * 4549 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03) 4550 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03) 4551 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03) 4552 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03) 4553 * 4554 */ 4555 4556 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */ 4557 #define I2C_TDA8540 0x90 4558 #define I2C_TDA8540_ALT1 0x92 4559 #define I2C_TDA8540_ALT2 0x94 4560 #define I2C_TDA8540_ALT3 0x96 4561 #define I2C_TDA8540_ALT4 0x98 4562 #define I2C_TDA8540_ALT5 0x9a 4563 #define I2C_TDA8540_ALT6 0x9c 4564 4565 static void ivc120_muxsel(struct bttv *btv, unsigned int input) 4566 { 4567 /* Simple maths */ 4568 int key = input % 4; 4569 int matrix = input / 4; 4570 4571 dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n", 4572 btv->c.nr, input, matrix, key); 4573 4574 /* Handles the input selection on the TDA8540's */ 4575 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00, 4576 ((matrix == 3) ? (key | key << 2) : 0x00), 1); 4577 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00, 4578 ((matrix == 0) ? (key | key << 2) : 0x00), 1); 4579 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00, 4580 ((matrix == 1) ? (key | key << 2) : 0x00), 1); 4581 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00, 4582 ((matrix == 2) ? (key | key << 2) : 0x00), 1); 4583 4584 /* Handles the output enables on the TDA8540's */ 4585 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02, 4586 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */ 4587 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02, 4588 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */ 4589 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02, 4590 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */ 4591 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02, 4592 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */ 4593 4594 /* 878's MUX0 is already selected for input via muxsel values */ 4595 } 4596 4597 4598 /* PXC200 muxsel helper 4599 * luke@syseng.anu.edu.au 4600 * another transplant 4601 * from Alessandro Rubini (rubini@linux.it) 4602 * 4603 * There are 4 kinds of cards: 4604 * PXC200L which is bt848 4605 * PXC200F which is bt848 with PIC controlling mux 4606 * PXC200AL which is bt878 4607 * PXC200AF which is bt878 with PIC controlling mux 4608 */ 4609 #define PX_CFG_PXC200F 0x01 4610 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */ 4611 #define PX_I2C_PIC 0x0f 4612 #define PX_PXC200A_CARDID 0x200a1295 4613 #define PX_I2C_CMD_CFG 0x00 4614 4615 static void PXC200_muxsel(struct bttv *btv, unsigned int input) 4616 { 4617 int rc; 4618 long mux; 4619 int bitmask; 4620 unsigned char buf[2]; 4621 4622 /* Read PIC config to determine if this is a PXC200F */ 4623 /* PX_I2C_CMD_CFG*/ 4624 buf[0]=0; 4625 buf[1]=0; 4626 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1); 4627 if (rc) { 4628 pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n", 4629 btv->c.nr, rc); 4630 /* not PXC ? do nothing */ 4631 return; 4632 } 4633 4634 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL); 4635 if (!(rc & PX_CFG_PXC200F)) { 4636 pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n", 4637 btv->c.nr, rc); 4638 return; 4639 } 4640 4641 4642 /* The multiplexer in the 200F is handled by the GPIO port */ 4643 /* get correct mapping between inputs */ 4644 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */ 4645 /* ** not needed!? */ 4646 mux = input; 4647 4648 /* make sure output pins are enabled */ 4649 /* bitmask=0x30f; */ 4650 bitmask=0x302; 4651 /* check whether we have a PXC200A */ 4652 if (btv->cardid == PX_PXC200A_CARDID) { 4653 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */ 4654 bitmask |= 7<<4; /* the DAC */ 4655 } 4656 btwrite(bitmask, BT848_GPIO_OUT_EN); 4657 4658 bitmask = btread(BT848_GPIO_DATA); 4659 if (btv->cardid == PX_PXC200A_CARDID) 4660 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7); 4661 else /* older device */ 4662 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8); 4663 btwrite(bitmask,BT848_GPIO_DATA); 4664 4665 /* 4666 * Was "to be safe, set the bt848 to input 0" 4667 * Actually, since it's ok at load time, better not messing 4668 * with these bits (on PXC200AF you need to set mux 2 here) 4669 * 4670 * needed because bttv-driver sets mux before calling this function 4671 */ 4672 if (btv->cardid == PX_PXC200A_CARDID) 4673 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM); 4674 else /* older device */ 4675 btand(~BT848_IFORM_MUXSEL,BT848_IFORM); 4676 4677 pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux); 4678 } 4679 4680 static void phytec_muxsel(struct bttv *btv, unsigned int input) 4681 { 4682 unsigned int mux = input % 4; 4683 4684 if (input == btv->svhs) 4685 mux = 0; 4686 4687 gpio_bits(0x3, mux); 4688 } 4689 4690 /* 4691 * GeoVision GV-800(S) functions 4692 * Bruno Christo <bchristo@inf.ufsm.br> 4693 */ 4694 4695 /* This is a function to control the analog switch, which determines which 4696 * camera is routed to which controller. The switch comprises an X-address 4697 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a 4698 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3). 4699 * A data value (gpio bit 18) of '1' enables the switch, and '0' disables 4700 * the switch. A STROBE bit (gpio bit 17) latches the data value into the 4701 * specified address. There is also a chip select (gpio bit 16). 4702 * The idea is to set the address and chip select together, bring 4703 * STROBE high, write the data, and finally bring STROBE back to low. 4704 */ 4705 static void gv800s_write(struct bttv *btv, 4706 unsigned char xaddr, 4707 unsigned char yaddr, 4708 unsigned char data) { 4709 /* On the "master" 878A: 4710 * GPIO bits 0-9 are used for the analog switch: 4711 * 00 - 03: camera selector 4712 * 04 - 06: 878A (controller) selector 4713 * 16: cselect 4714 * 17: strobe 4715 * 18: data (1->on, 0->off) 4716 * 19: reset 4717 */ 4718 const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4); 4719 const u32 CSELECT = 1<<16; 4720 const u32 STROBE = 1<<17; 4721 const u32 DATA = data<<18; 4722 4723 gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */ 4724 gpio_bits(0x20000, STROBE); /* STROBE high */ 4725 gpio_bits(0x40000, DATA); /* write DATA */ 4726 gpio_bits(0x20000, ~STROBE); /* STROBE low */ 4727 } 4728 4729 /* 4730 * GeoVision GV-800(S) muxsel 4731 * 4732 * Each of the 4 cards (controllers) use this function. 4733 * The controller using this function selects the input through the GPIO pins 4734 * of the "master" card. A pointer to this card is stored in master[btv->c.nr]. 4735 * 4736 * The parameter 'input' is the requested camera number (0-4) on the controller. 4737 * The map array has the address of each input. Note that the addresses in the 4738 * array are in the sequence the original GeoVision driver uses, that is, set 4739 * every controller to input 0, then to input 1, 2, 3, repeat. This means that 4740 * the physical "camera 1" connector corresponds to controller 0 input 0, 4741 * "camera 2" corresponds to controller 1 input 0, and so on. 4742 * 4743 * After getting the input address, the function then writes the appropriate 4744 * data to the analog switch, and housekeeps the local copy of the switch 4745 * information. 4746 */ 4747 static void gv800s_muxsel(struct bttv *btv, unsigned int input) 4748 { 4749 struct bttv *mctlr; 4750 char *sw_status; 4751 int xaddr, yaddr; 4752 static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 }, 4753 { 0x1, 0x5, 0xb, 0x7 }, 4754 { 0x2, 0x8, 0xc, 0xe }, 4755 { 0x3, 0x9, 0xd, 0xf } }; 4756 input = input%4; 4757 mctlr = master[btv->c.nr]; 4758 if (mctlr == NULL) { 4759 /* do nothing until the "master" is detected */ 4760 return; 4761 } 4762 yaddr = (btv->c.nr - mctlr->c.nr) & 3; 4763 sw_status = (char *)(&mctlr->mbox_we); 4764 xaddr = map[yaddr][input] & 0xf; 4765 4766 /* Check if the controller/camera pair has changed, ignore otherwise */ 4767 if (sw_status[yaddr] != xaddr) { 4768 /* disable the old switch, enable the new one and save status */ 4769 gv800s_write(mctlr, sw_status[yaddr], yaddr, 0); 4770 sw_status[yaddr] = xaddr; 4771 gv800s_write(mctlr, xaddr, yaddr, 1); 4772 } 4773 } 4774 4775 /* GeoVision GV-800(S) "master" chip init */ 4776 static void gv800s_init(struct bttv *btv) 4777 { 4778 char *sw_status = (char *)(&btv->mbox_we); 4779 int ix; 4780 4781 gpio_inout(0xf107f, 0xf107f); 4782 gpio_write(1<<19); /* reset the analog MUX */ 4783 gpio_write(0); 4784 4785 /* Preset camera 0 to the 4 controllers */ 4786 for (ix = 0; ix < 4; ix++) { 4787 sw_status[ix] = ix; 4788 gv800s_write(btv, ix, ix, 1); 4789 } 4790 4791 /* Inputs on the "master" controller need this brightness fix */ 4792 bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1); 4793 4794 if (btv->c.nr > BTTV_MAX-4) 4795 return; 4796 /* 4797 * Store the "master" controller pointer in the master 4798 * array for later use in the muxsel function. 4799 */ 4800 master[btv->c.nr] = btv; 4801 master[btv->c.nr+1] = btv; 4802 master[btv->c.nr+2] = btv; 4803 master[btv->c.nr+3] = btv; 4804 } 4805 4806 /* ----------------------------------------------------------------------- */ 4807 /* motherboard chipset specific stuff */ 4808 4809 void __init bttv_check_chipset(void) 4810 { 4811 int pcipci_fail = 0; 4812 struct pci_dev *dev = NULL; 4813 4814 if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */ 4815 pcipci_fail = 1; 4816 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF)) 4817 triton1 = 1; 4818 if (pci_pci_problems & PCIPCI_VSFX) 4819 vsfx = 1; 4820 #ifdef PCIPCI_ALIMAGIK 4821 if (pci_pci_problems & PCIPCI_ALIMAGIK) 4822 latency = 0x0A; 4823 #endif 4824 4825 4826 /* print warnings about any quirks found */ 4827 if (triton1) 4828 pr_info("Host bridge needs ETBF enabled\n"); 4829 if (vsfx) 4830 pr_info("Host bridge needs VSFX enabled\n"); 4831 if (pcipci_fail) { 4832 pr_info("bttv and your chipset may not work together\n"); 4833 if (!no_overlay) { 4834 pr_info("overlay will be disabled\n"); 4835 no_overlay = 1; 4836 } else { 4837 pr_info("overlay forced. Use this option at your own risk.\n"); 4838 } 4839 } 4840 if (UNSET != latency) 4841 pr_info("pci latency fixup [%d]\n", latency); 4842 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL, 4843 PCI_DEVICE_ID_INTEL_82441, dev))) { 4844 unsigned char b; 4845 pci_read_config_byte(dev, 0x53, &b); 4846 if (bttv_debug) 4847 pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n", 4848 b); 4849 } 4850 } 4851 4852 int bttv_handle_chipset(struct bttv *btv) 4853 { 4854 unsigned char command; 4855 4856 if (!triton1 && !vsfx && UNSET == latency) 4857 return 0; 4858 4859 if (bttv_verbose) { 4860 if (triton1) 4861 pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n", 4862 btv->c.nr); 4863 if (vsfx && btv->id >= 878) 4864 pr_info("%d: enabling VSFX\n", btv->c.nr); 4865 if (UNSET != latency) 4866 pr_info("%d: setting pci timer to %d\n", 4867 btv->c.nr, latency); 4868 } 4869 4870 if (btv->id < 878) { 4871 /* bt848 (mis)uses a bit in the irq mask for etbf */ 4872 if (triton1) 4873 btv->triton1 = BT848_INT_ETBF; 4874 } else { 4875 /* bt878 has a bit in the pci config space for it */ 4876 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command); 4877 if (triton1) 4878 command |= BT878_EN_TBFX; 4879 if (vsfx) 4880 command |= BT878_EN_VSFX; 4881 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command); 4882 } 4883 if (UNSET != latency) 4884 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency); 4885 return 0; 4886 } 4887 4888 4889 /* 4890 * Local variables: 4891 * c-basic-offset: 8 4892 * End: 4893 */ 4894