1 /* 2 3 bttv-cards.c 4 5 this file has configuration informations - card-specific stuff 6 like the big tvcards array for the most part 7 8 Copyright (C) 1996,97,98 Ralph Metzler (rjkm@thp.uni-koeln.de) 9 & Marcus Metzler (mocm@thp.uni-koeln.de) 10 (c) 1999-2001 Gerd Knorr <kraxel@goldbach.in-berlin.de> 11 12 This program is free software; you can redistribute it and/or modify 13 it under the terms of the GNU General Public License as published by 14 the Free Software Foundation; either version 2 of the License, or 15 (at your option) any later version. 16 17 This program is distributed in the hope that it will be useful, 18 but WITHOUT ANY WARRANTY; without even the implied warranty of 19 MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the 20 GNU General Public License for more details. 21 22 You should have received a copy of the GNU General Public License 23 along with this program; if not, write to the Free Software 24 Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. 25 26 */ 27 28 #define pr_fmt(fmt) KBUILD_MODNAME ": " fmt 29 30 #include <linux/delay.h> 31 #include <linux/module.h> 32 #include <linux/kmod.h> 33 #include <linux/init.h> 34 #include <linux/pci.h> 35 #include <linux/vmalloc.h> 36 #include <linux/firmware.h> 37 #include <net/checksum.h> 38 39 #include <asm/unaligned.h> 40 #include <asm/io.h> 41 42 #include "bttvp.h" 43 #include <media/v4l2-common.h> 44 #include <media/i2c/tvaudio.h> 45 #include "bttv-audio-hook.h" 46 47 /* fwd decl */ 48 static void boot_msp34xx(struct bttv *btv, int pin); 49 static void hauppauge_eeprom(struct bttv *btv); 50 static void avermedia_eeprom(struct bttv *btv); 51 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]); 52 static void modtec_eeprom(struct bttv *btv); 53 static void init_PXC200(struct bttv *btv); 54 static void init_RTV24(struct bttv *btv); 55 static void init_PCI8604PW(struct bttv *btv); 56 57 static void rv605_muxsel(struct bttv *btv, unsigned int input); 58 static void eagle_muxsel(struct bttv *btv, unsigned int input); 59 static void xguard_muxsel(struct bttv *btv, unsigned int input); 60 static void ivc120_muxsel(struct bttv *btv, unsigned int input); 61 static void gvc1100_muxsel(struct bttv *btv, unsigned int input); 62 63 static void PXC200_muxsel(struct bttv *btv, unsigned int input); 64 65 static void picolo_tetra_muxsel(struct bttv *btv, unsigned int input); 66 static void picolo_tetra_init(struct bttv *btv); 67 68 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input); 69 static void tibetCS16_init(struct bttv *btv); 70 71 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input); 72 static void kodicom4400r_init(struct bttv *btv); 73 74 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input); 75 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input); 76 77 static void geovision_muxsel(struct bttv *btv, unsigned int input); 78 79 static void phytec_muxsel(struct bttv *btv, unsigned int input); 80 81 static void gv800s_muxsel(struct bttv *btv, unsigned int input); 82 static void gv800s_init(struct bttv *btv); 83 84 static void td3116_muxsel(struct bttv *btv, unsigned int input); 85 86 static int terratec_active_radio_upgrade(struct bttv *btv); 87 static int tea575x_init(struct bttv *btv); 88 static void identify_by_eeprom(struct bttv *btv, 89 unsigned char eeprom_data[256]); 90 static int pvr_boot(struct bttv *btv); 91 92 /* config variables */ 93 static unsigned int triton1; 94 static unsigned int vsfx; 95 static unsigned int latency = UNSET; 96 int no_overlay=-1; 97 98 static unsigned int card[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 99 static unsigned int pll[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 100 static unsigned int tuner[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 101 static unsigned int svhs[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 102 static unsigned int remote[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = UNSET }; 103 static unsigned int audiodev[BTTV_MAX]; 104 static unsigned int saa6588[BTTV_MAX]; 105 static struct bttv *master[BTTV_MAX] = { [ 0 ... (BTTV_MAX-1) ] = NULL }; 106 static unsigned int autoload = UNSET; 107 static unsigned int gpiomask = UNSET; 108 static unsigned int audioall = UNSET; 109 static unsigned int audiomux[5] = { [ 0 ... 4 ] = UNSET }; 110 111 /* insmod options */ 112 module_param(triton1, int, 0444); 113 module_param(vsfx, int, 0444); 114 module_param(no_overlay, int, 0444); 115 module_param(latency, int, 0444); 116 module_param(gpiomask, int, 0444); 117 module_param(audioall, int, 0444); 118 module_param(autoload, int, 0444); 119 120 module_param_array(card, int, NULL, 0444); 121 module_param_array(pll, int, NULL, 0444); 122 module_param_array(tuner, int, NULL, 0444); 123 module_param_array(svhs, int, NULL, 0444); 124 module_param_array(remote, int, NULL, 0444); 125 module_param_array(audiodev, int, NULL, 0444); 126 module_param_array(audiomux, int, NULL, 0444); 127 128 MODULE_PARM_DESC(triton1, "set ETBF pci config bit [enable bug compatibility for triton1 + others]"); 129 MODULE_PARM_DESC(vsfx, "set VSFX pci config bit [yet another chipset flaw workaround]"); 130 MODULE_PARM_DESC(latency,"pci latency timer"); 131 MODULE_PARM_DESC(card,"specify TV/grabber card model, see CARDLIST file for a list"); 132 MODULE_PARM_DESC(pll, "specify installed crystal (0=none, 28=28 MHz, 35=35 MHz, 14=14 MHz)"); 133 MODULE_PARM_DESC(tuner,"specify installed tuner type"); 134 MODULE_PARM_DESC(autoload, "obsolete option, please do not use anymore"); 135 MODULE_PARM_DESC(audiodev, "specify audio device:\n" 136 "\t\t-1 = no audio\n" 137 "\t\t 0 = autodetect (default)\n" 138 "\t\t 1 = msp3400\n" 139 "\t\t 2 = tda7432\n" 140 "\t\t 3 = tvaudio"); 141 MODULE_PARM_DESC(saa6588, "if 1, then load the saa6588 RDS module, default (0) is to use the card definition."); 142 MODULE_PARM_DESC(no_overlay, "allow override overlay default (0 disables, 1 enables) [some VIA/SIS chipsets are known to have problem with overlay]"); 143 144 145 /* I2C addresses list */ 146 #define I2C_ADDR_TDA7432 0x8a 147 #define I2C_ADDR_MSP3400 0x80 148 #define I2C_ADDR_MSP3400_ALT 0x88 149 150 151 /* ----------------------------------------------------------------------- */ 152 /* list of card IDs for bt878+ cards */ 153 154 static struct CARD { 155 unsigned id; 156 int cardnr; 157 char *name; 158 } cards[] = { 159 { 0x13eb0070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV" }, 160 { 0x39000070, BTTV_BOARD_HAUPPAUGE878, "Hauppauge WinTV-D" }, 161 { 0x45000070, BTTV_BOARD_HAUPPAUGEPVR, "Hauppauge WinTV/PVR" }, 162 { 0xff000070, BTTV_BOARD_OSPREY1x0, "Osprey-100" }, 163 { 0xff010070, BTTV_BOARD_OSPREY2x0_SVID,"Osprey-200" }, 164 { 0xff020070, BTTV_BOARD_OSPREY500, "Osprey-500" }, 165 { 0xff030070, BTTV_BOARD_OSPREY2000, "Osprey-2000" }, 166 { 0xff040070, BTTV_BOARD_OSPREY540, "Osprey-540" }, 167 { 0xff070070, BTTV_BOARD_OSPREY440, "Osprey-440" }, 168 169 { 0x00011002, BTTV_BOARD_ATI_TVWONDER, "ATI TV Wonder" }, 170 { 0x00031002, BTTV_BOARD_ATI_TVWONDERVE,"ATI TV Wonder/VE" }, 171 172 { 0x6606107d, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, 173 { 0x6607107d, BTTV_BOARD_WINFASTVC100, "Leadtek WinFast VC 100" }, 174 { 0x6609107d, BTTV_BOARD_WINFAST2000, "Leadtek TV 2000 XP" }, 175 { 0x263610b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, 176 { 0x264510b4, BTTV_BOARD_STB2, "STB TV PCI FM, Gateway P/N 6000704" }, 177 { 0x402010fc, BTTV_BOARD_GVBCTV3PCI, "I-O Data Co. GV-BCTV3/PCI" }, 178 { 0x405010fc, BTTV_BOARD_GVBCTV4PCI, "I-O Data Co. GV-BCTV4/PCI" }, 179 { 0x407010fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, 180 { 0xd01810fc, BTTV_BOARD_GVBCTV5PCI, "I-O Data Co. GV-BCTV5/PCI" }, 181 182 { 0x001211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, 183 /* some cards ship with byteswapped IDs ... */ 184 { 0x1200bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, 185 { 0xff00bd11, BTTV_BOARD_PINNACLE, "Pinnacle PCTV [bswap]" }, 186 /* this seems to happen as well ... */ 187 { 0xff1211bd, BTTV_BOARD_PINNACLE, "Pinnacle PCTV" }, 188 189 { 0x3000121a, BTTV_BOARD_VOODOOTV_200, "3Dfx VoodooTV 200" }, 190 { 0x263710b4, BTTV_BOARD_VOODOOTV_FM, "3Dfx VoodooTV FM" }, 191 { 0x3060121a, BTTV_BOARD_STB2, "3Dfx VoodooTV 100/ STB OEM" }, 192 193 { 0x3000144f, BTTV_BOARD_MAGICTVIEW063, "(Askey Magic/others) TView99 CPH06x" }, 194 { 0xa005144f, BTTV_BOARD_MAGICTVIEW063, "CPH06X TView99-Card" }, 195 { 0x3002144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH05x" }, 196 { 0x3005144f, BTTV_BOARD_MAGICTVIEW061, "(Askey Magic/others) TView99 CPH061/06L (T1/LC)" }, 197 { 0x5000144f, BTTV_BOARD_MAGICTVIEW061, "Askey CPH050" }, 198 { 0x300014ff, BTTV_BOARD_MAGICTVIEW061, "TView 99 (CPH061)" }, 199 { 0x300214ff, BTTV_BOARD_PHOEBE_TVMAS, "Phoebe TV Master (CPH060)" }, 200 201 { 0x00011461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, 202 { 0x00021461, BTTV_BOARD_AVERMEDIA98, "AVermedia TVCapture 98" }, 203 { 0x00031461, BTTV_BOARD_AVPHONE98, "AVerMedia TVPhone98" }, 204 { 0x00041461, BTTV_BOARD_AVERMEDIA98, "AVerMedia TVCapture 98" }, 205 { 0x03001461, BTTV_BOARD_AVERMEDIA98, "VDOMATE TV TUNER CARD" }, 206 207 { 0x1117153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL B/G)" }, 208 { 0x1118153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL B/G)" }, 209 { 0x1119153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Philips PAL I)" }, 210 { 0x111a153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (Temic PAL I)" }, 211 212 { 0x1123153b, BTTV_BOARD_TERRATVRADIO, "Terratec TV Radio+" }, 213 { 0x1127153b, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.05)" }, 214 /* clashes with FlyVideo 215 *{ 0x18521852, BTTV_BOARD_TERRATV, "Terratec TV+ (V1.10)" }, */ 216 { 0x1134153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue (LR102)" }, 217 { 0x1135153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* LR102 */ 218 { 0x5018153b, BTTV_BOARD_TERRATVALUE, "Terratec TValue" }, /* ?? */ 219 { 0xff3b153b, BTTV_BOARD_TERRATVALUER, "Terratec TValue Radio" }, /* ?? */ 220 221 { 0x400015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, 222 { 0x400a15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV" }, 223 { 0x400d15b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, 224 { 0x401015b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, 225 { 0x401615b0, BTTV_BOARD_ZOLTRIX_GENIE, "Zoltrix Genie TV / Radio" }, 226 227 { 0x1430aa00, BTTV_BOARD_PV143, "Provideo PV143A" }, 228 { 0x1431aa00, BTTV_BOARD_PV143, "Provideo PV143B" }, 229 { 0x1432aa00, BTTV_BOARD_PV143, "Provideo PV143C" }, 230 { 0x1433aa00, BTTV_BOARD_PV143, "Provideo PV143D" }, 231 { 0x1433aa03, BTTV_BOARD_PV143, "Security Eyes" }, 232 233 { 0x1460aa00, BTTV_BOARD_PV150, "Provideo PV150A-1" }, 234 { 0x1461aa01, BTTV_BOARD_PV150, "Provideo PV150A-2" }, 235 { 0x1462aa02, BTTV_BOARD_PV150, "Provideo PV150A-3" }, 236 { 0x1463aa03, BTTV_BOARD_PV150, "Provideo PV150A-4" }, 237 238 { 0x1464aa04, BTTV_BOARD_PV150, "Provideo PV150B-1" }, 239 { 0x1465aa05, BTTV_BOARD_PV150, "Provideo PV150B-2" }, 240 { 0x1466aa06, BTTV_BOARD_PV150, "Provideo PV150B-3" }, 241 { 0x1467aa07, BTTV_BOARD_PV150, "Provideo PV150B-4" }, 242 243 { 0xa132ff00, BTTV_BOARD_IVC100, "IVC-100" }, 244 { 0xa1550000, BTTV_BOARD_IVC200, "IVC-200" }, 245 { 0xa1550001, BTTV_BOARD_IVC200, "IVC-200" }, 246 { 0xa1550002, BTTV_BOARD_IVC200, "IVC-200" }, 247 { 0xa1550003, BTTV_BOARD_IVC200, "IVC-200" }, 248 { 0xa1550100, BTTV_BOARD_IVC200, "IVC-200G" }, 249 { 0xa1550101, BTTV_BOARD_IVC200, "IVC-200G" }, 250 { 0xa1550102, BTTV_BOARD_IVC200, "IVC-200G" }, 251 { 0xa1550103, BTTV_BOARD_IVC200, "IVC-200G" }, 252 { 0xa1550800, BTTV_BOARD_IVC200, "IVC-200" }, 253 { 0xa1550801, BTTV_BOARD_IVC200, "IVC-200" }, 254 { 0xa1550802, BTTV_BOARD_IVC200, "IVC-200" }, 255 { 0xa1550803, BTTV_BOARD_IVC200, "IVC-200" }, 256 { 0xa182ff00, BTTV_BOARD_IVC120, "IVC-120G" }, 257 { 0xa182ff01, BTTV_BOARD_IVC120, "IVC-120G" }, 258 { 0xa182ff02, BTTV_BOARD_IVC120, "IVC-120G" }, 259 { 0xa182ff03, BTTV_BOARD_IVC120, "IVC-120G" }, 260 { 0xa182ff04, BTTV_BOARD_IVC120, "IVC-120G" }, 261 { 0xa182ff05, BTTV_BOARD_IVC120, "IVC-120G" }, 262 { 0xa182ff06, BTTV_BOARD_IVC120, "IVC-120G" }, 263 { 0xa182ff07, BTTV_BOARD_IVC120, "IVC-120G" }, 264 { 0xa182ff08, BTTV_BOARD_IVC120, "IVC-120G" }, 265 { 0xa182ff09, BTTV_BOARD_IVC120, "IVC-120G" }, 266 { 0xa182ff0a, BTTV_BOARD_IVC120, "IVC-120G" }, 267 { 0xa182ff0b, BTTV_BOARD_IVC120, "IVC-120G" }, 268 { 0xa182ff0c, BTTV_BOARD_IVC120, "IVC-120G" }, 269 { 0xa182ff0d, BTTV_BOARD_IVC120, "IVC-120G" }, 270 { 0xa182ff0e, BTTV_BOARD_IVC120, "IVC-120G" }, 271 { 0xa182ff0f, BTTV_BOARD_IVC120, "IVC-120G" }, 272 { 0xf0500000, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 273 { 0xf0500001, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 274 { 0xf0500002, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 275 { 0xf0500003, BTTV_BOARD_IVCE8784, "IVCE-8784" }, 276 277 { 0x41424344, BTTV_BOARD_GRANDTEC, "GrandTec Multi Capture" }, 278 { 0x01020304, BTTV_BOARD_XGUARD, "Grandtec Grand X-Guard" }, 279 280 { 0x18501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, 281 { 0xa0501851, BTTV_BOARD_CHRONOS_VS2, "FlyVideo 98 (LR50)/ Chronos Video Shuttle II" }, 282 { 0x18511851, BTTV_BOARD_FLYVIDEO98EZ, "FlyVideo 98EZ (LR51)/ CyberMail AV" }, 283 { 0x18521852, BTTV_BOARD_TYPHOON_TVIEW, "FlyVideo 98FM (LR50)/ Typhoon TView TV/FM Tuner" }, 284 { 0x41a0a051, BTTV_BOARD_FLYVIDEO_98FM, "Lifeview FlyVideo 98 LR50 Rev Q" }, 285 { 0x18501f7f, BTTV_BOARD_FLYVIDEO_98, "Lifeview Flyvideo 98" }, 286 287 { 0x010115cb, BTTV_BOARD_GMV1, "AG GMV1" }, 288 { 0x010114c7, BTTV_BOARD_MODTEC_205, "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV" }, 289 290 { 0x10b42636, BTTV_BOARD_HAUPPAUGE878, "STB ???" }, 291 { 0x217d6606, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, 292 { 0xfff6f6ff, BTTV_BOARD_WINFAST2000, "Leadtek WinFast TV 2000" }, 293 { 0x03116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 311" }, 294 { 0x06116000, BTTV_BOARD_SENSORAY311_611, "Sensoray 611" }, 295 { 0x00790e11, BTTV_BOARD_WINDVR, "Canopus WinDVR PCI" }, 296 { 0xa0fca1a0, BTTV_BOARD_ZOLTRIX, "Face to Face Tvmax" }, 297 { 0x82b2aa6a, BTTV_BOARD_SIMUS_GVC1100, "SIMUS GVC1100" }, 298 { 0x146caa0c, BTTV_BOARD_PV951, "ituner spectra8" }, 299 { 0x200a1295, BTTV_BOARD_PXC200, "ImageNation PXC200A" }, 300 301 { 0x40111554, BTTV_BOARD_PV_BT878P_9B, "Prolink Pixelview PV-BT" }, 302 { 0x17de0a01, BTTV_BOARD_KWORLD, "Mecer TV/FM/Video Tuner" }, 303 304 { 0x01051805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #1" }, 305 { 0x01061805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #2" }, 306 { 0x01071805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #3" }, 307 { 0x01081805, BTTV_BOARD_PICOLO_TETRA_CHIP, "Picolo Tetra Chip #4" }, 308 309 { 0x15409511, BTTV_BOARD_ACORP_Y878F, "Acorp Y878F" }, 310 311 { 0x53534149, BTTV_BOARD_SSAI_SECURITY, "SSAI Security Video Interface" }, 312 { 0x5353414a, BTTV_BOARD_SSAI_ULTRASOUND, "SSAI Ultrasound Video Interface" }, 313 314 /* likely broken, vendor id doesn't match the other magic views ... 315 * { 0xa0fca04f, BTTV_BOARD_MAGICTVIEW063, "Guillemot Maxi TV Video 3" }, */ 316 317 /* Duplicate PCI ID, reconfigure for this board during the eeprom read. 318 * { 0x13eb0070, BTTV_BOARD_HAUPPAUGE_IMPACTVCB, "Hauppauge ImpactVCB" }, */ 319 320 { 0x109e036e, BTTV_BOARD_CONCEPTRONIC_CTVFMI2, "Conceptronic CTVFMi v2"}, 321 322 /* DVB cards (using pci function .1 for mpeg data xfer) */ 323 { 0x001c11bd, BTTV_BOARD_PINNACLESAT, "Pinnacle PCTV Sat" }, 324 { 0x01010071, BTTV_BOARD_NEBULA_DIGITV, "Nebula Electronics DigiTV" }, 325 { 0x20007063, BTTV_BOARD_PC_HDTV, "pcHDTV HD-2000 TV"}, 326 { 0x002611bd, BTTV_BOARD_TWINHAN_DST, "Pinnacle PCTV SAT CI" }, 327 { 0x00011822, BTTV_BOARD_TWINHAN_DST, "Twinhan VisionPlus DVB" }, 328 { 0xfc00270f, BTTV_BOARD_TWINHAN_DST, "ChainTech digitop DST-1000 DVB-S" }, 329 { 0x07711461, BTTV_BOARD_AVDVBT_771, "AVermedia AverTV DVB-T 771" }, 330 { 0x07611461, BTTV_BOARD_AVDVBT_761, "AverMedia AverTV DVB-T 761" }, 331 { 0xdb1018ac, BTTV_BOARD_DVICO_DVBT_LITE, "DViCO FusionHDTV DVB-T Lite" }, 332 { 0xdb1118ac, BTTV_BOARD_DVICO_DVBT_LITE, "Ultraview DVB-T Lite" }, 333 { 0xd50018ac, BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE, "DViCO FusionHDTV 5 Lite" }, 334 { 0x00261822, BTTV_BOARD_TWINHAN_DST, "DNTV Live! Mini "}, 335 { 0xd200dbc0, BTTV_BOARD_DVICO_FUSIONHDTV_2, "DViCO FusionHDTV 2" }, 336 { 0x763c008a, BTTV_BOARD_GEOVISION_GV600, "GeoVision GV-600" }, 337 { 0x18011000, BTTV_BOARD_ENLTV_FM_2, "Encore ENL TV-FM-2" }, 338 { 0x763d800a, BTTV_BOARD_GEOVISION_GV800S, "GeoVision GV-800(S) (master)" }, 339 { 0x763d800b, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, 340 { 0x763d800c, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, 341 { 0x763d800d, BTTV_BOARD_GEOVISION_GV800S_SL, "GeoVision GV-800(S) (slave)" }, 342 343 { 0x15401830, BTTV_BOARD_PV183, "Provideo PV183-1" }, 344 { 0x15401831, BTTV_BOARD_PV183, "Provideo PV183-2" }, 345 { 0x15401832, BTTV_BOARD_PV183, "Provideo PV183-3" }, 346 { 0x15401833, BTTV_BOARD_PV183, "Provideo PV183-4" }, 347 { 0x15401834, BTTV_BOARD_PV183, "Provideo PV183-5" }, 348 { 0x15401835, BTTV_BOARD_PV183, "Provideo PV183-6" }, 349 { 0x15401836, BTTV_BOARD_PV183, "Provideo PV183-7" }, 350 { 0x15401837, BTTV_BOARD_PV183, "Provideo PV183-8" }, 351 { 0x3116f200, BTTV_BOARD_TVT_TD3116, "Tongwei Video Technology TD-3116" }, 352 { 0x02280279, BTTV_BOARD_APOSONIC_WDVR, "Aposonic W-DVR" }, 353 { 0, -1, NULL } 354 }; 355 356 /* ----------------------------------------------------------------------- */ 357 /* array with description for bt848 / bt878 tv/grabber cards */ 358 359 struct tvcard bttv_tvcards[] = { 360 /* ---- card 0x00 ---------------------------------- */ 361 [BTTV_BOARD_UNKNOWN] = { 362 .name = " *** UNKNOWN/GENERIC *** ", 363 .video_inputs = 4, 364 .svhs = 2, 365 .muxsel = MUXSEL(2, 3, 1, 0), 366 .tuner_type = UNSET, 367 .tuner_addr = ADDR_UNSET, 368 }, 369 [BTTV_BOARD_MIRO] = { 370 .name = "MIRO PCTV", 371 .video_inputs = 4, 372 /* .audio_inputs= 1, */ 373 .svhs = 2, 374 .gpiomask = 15, 375 .muxsel = MUXSEL(2, 3, 1, 1), 376 .gpiomux = { 2, 0, 0, 0 }, 377 .gpiomute = 10, 378 .tuner_type = UNSET, 379 .tuner_addr = ADDR_UNSET, 380 }, 381 [BTTV_BOARD_HAUPPAUGE] = { 382 .name = "Hauppauge (bt848)", 383 .video_inputs = 4, 384 /* .audio_inputs= 1, */ 385 .svhs = 2, 386 .gpiomask = 7, 387 .muxsel = MUXSEL(2, 3, 1, 1), 388 .gpiomux = { 0, 1, 2, 3 }, 389 .gpiomute = 4, 390 .tuner_type = UNSET, 391 .tuner_addr = ADDR_UNSET, 392 }, 393 [BTTV_BOARD_STB] = { 394 .name = "STB, Gateway P/N 6000699 (bt848)", 395 .video_inputs = 3, 396 /* .audio_inputs= 1, */ 397 .svhs = 2, 398 .gpiomask = 7, 399 .muxsel = MUXSEL(2, 3, 1, 1), 400 .gpiomux = { 4, 0, 2, 3 }, 401 .gpiomute = 1, 402 .no_msp34xx = 1, 403 .tuner_type = TUNER_PHILIPS_NTSC, 404 .tuner_addr = ADDR_UNSET, 405 .pll = PLL_28, 406 .has_radio = 1, 407 }, 408 409 /* ---- card 0x04 ---------------------------------- */ 410 [BTTV_BOARD_INTEL] = { 411 .name = "Intel Create and Share PCI/ Smart Video Recorder III", 412 .video_inputs = 4, 413 /* .audio_inputs= 0, */ 414 .svhs = 2, 415 .gpiomask = 0, 416 .muxsel = MUXSEL(2, 3, 1, 1), 417 .gpiomux = { 0 }, 418 .tuner_type = TUNER_ABSENT, 419 .tuner_addr = ADDR_UNSET, 420 }, 421 [BTTV_BOARD_DIAMOND] = { 422 .name = "Diamond DTV2000", 423 .video_inputs = 4, 424 /* .audio_inputs= 1, */ 425 .svhs = 2, 426 .gpiomask = 3, 427 .muxsel = MUXSEL(2, 3, 1, 0), 428 .gpiomux = { 0, 1, 0, 1 }, 429 .gpiomute = 3, 430 .tuner_type = UNSET, 431 .tuner_addr = ADDR_UNSET, 432 }, 433 [BTTV_BOARD_AVERMEDIA] = { 434 .name = "AVerMedia TVPhone", 435 .video_inputs = 3, 436 /* .audio_inputs= 1, */ 437 .svhs = 3, 438 .muxsel = MUXSEL(2, 3, 1, 1), 439 .gpiomask = 0x0f, 440 .gpiomux = { 0x0c, 0x04, 0x08, 0x04 }, 441 /* 0x04 for some cards ?? */ 442 .tuner_type = UNSET, 443 .tuner_addr = ADDR_UNSET, 444 .audio_mode_gpio= avermedia_tvphone_audio, 445 .has_remote = 1, 446 }, 447 [BTTV_BOARD_MATRIX_VISION] = { 448 .name = "MATRIX-Vision MV-Delta", 449 .video_inputs = 5, 450 /* .audio_inputs= 1, */ 451 .svhs = 3, 452 .gpiomask = 0, 453 .muxsel = MUXSEL(2, 3, 1, 0, 0), 454 .gpiomux = { 0 }, 455 .tuner_type = TUNER_ABSENT, 456 .tuner_addr = ADDR_UNSET, 457 }, 458 459 /* ---- card 0x08 ---------------------------------- */ 460 [BTTV_BOARD_FLYVIDEO] = { 461 .name = "Lifeview FlyVideo II (Bt848) LR26 / MAXI TV Video PCI2 LR26", 462 .video_inputs = 4, 463 /* .audio_inputs= 1, */ 464 .svhs = 2, 465 .gpiomask = 0xc00, 466 .muxsel = MUXSEL(2, 3, 1, 1), 467 .gpiomux = { 0, 0xc00, 0x800, 0x400 }, 468 .gpiomute = 0xc00, 469 .pll = PLL_28, 470 .tuner_type = UNSET, 471 .tuner_addr = ADDR_UNSET, 472 }, 473 [BTTV_BOARD_TURBOTV] = { 474 .name = "IMS/IXmicro TurboTV", 475 .video_inputs = 3, 476 /* .audio_inputs= 1, */ 477 .svhs = 2, 478 .gpiomask = 3, 479 .muxsel = MUXSEL(2, 3, 1, 1), 480 .gpiomux = { 1, 1, 2, 3 }, 481 .pll = PLL_28, 482 .tuner_type = TUNER_TEMIC_PAL, 483 .tuner_addr = ADDR_UNSET, 484 }, 485 [BTTV_BOARD_HAUPPAUGE878] = { 486 .name = "Hauppauge (bt878)", 487 .video_inputs = 4, 488 /* .audio_inputs= 1, */ 489 .svhs = 2, 490 .gpiomask = 0x0f, /* old: 7 */ 491 .muxsel = MUXSEL(2, 0, 1, 1), 492 .gpiomux = { 0, 1, 2, 3 }, 493 .gpiomute = 4, 494 .pll = PLL_28, 495 .tuner_type = UNSET, 496 .tuner_addr = ADDR_UNSET, 497 }, 498 [BTTV_BOARD_MIROPRO] = { 499 .name = "MIRO PCTV pro", 500 .video_inputs = 3, 501 /* .audio_inputs= 1, */ 502 .svhs = 2, 503 .gpiomask = 0x3014f, 504 .muxsel = MUXSEL(2, 3, 1, 1), 505 .gpiomux = { 0x20001,0x10001, 0, 0 }, 506 .gpiomute = 10, 507 .tuner_type = UNSET, 508 .tuner_addr = ADDR_UNSET, 509 }, 510 511 /* ---- card 0x0c ---------------------------------- */ 512 [BTTV_BOARD_ADSTECH_TV] = { 513 .name = "ADS Technologies Channel Surfer TV (bt848)", 514 .video_inputs = 3, 515 /* .audio_inputs= 1, */ 516 .svhs = 2, 517 .gpiomask = 15, 518 .muxsel = MUXSEL(2, 3, 1, 1), 519 .gpiomux = { 13, 14, 11, 7 }, 520 .tuner_type = UNSET, 521 .tuner_addr = ADDR_UNSET, 522 }, 523 [BTTV_BOARD_AVERMEDIA98] = { 524 .name = "AVerMedia TVCapture 98", 525 .video_inputs = 3, 526 /* .audio_inputs= 4, */ 527 .svhs = 2, 528 .gpiomask = 15, 529 .muxsel = MUXSEL(2, 3, 1, 1), 530 .gpiomux = { 13, 14, 11, 7 }, 531 .msp34xx_alt = 1, 532 .pll = PLL_28, 533 .tuner_type = TUNER_PHILIPS_PAL, 534 .tuner_addr = ADDR_UNSET, 535 .audio_mode_gpio= avermedia_tv_stereo_audio, 536 .no_gpioirq = 1, 537 }, 538 [BTTV_BOARD_VHX] = { 539 .name = "Aimslab Video Highway Xtreme (VHX)", 540 .video_inputs = 3, 541 /* .audio_inputs= 1, */ 542 .svhs = 2, 543 .gpiomask = 7, 544 .muxsel = MUXSEL(2, 3, 1, 1), 545 .gpiomux = { 0, 2, 1, 3 }, /* old: {0, 1, 2, 3, 4} */ 546 .gpiomute = 4, 547 .pll = PLL_28, 548 .tuner_type = UNSET, 549 .tuner_addr = ADDR_UNSET, 550 }, 551 [BTTV_BOARD_ZOLTRIX] = { 552 .name = "Zoltrix TV-Max", 553 .video_inputs = 3, 554 /* .audio_inputs= 1, */ 555 .svhs = 2, 556 .gpiomask = 15, 557 .muxsel = MUXSEL(2, 3, 1, 1), 558 .gpiomux = { 0, 0, 1, 0 }, 559 .gpiomute = 10, 560 .tuner_type = UNSET, 561 .tuner_addr = ADDR_UNSET, 562 }, 563 564 /* ---- card 0x10 ---------------------------------- */ 565 [BTTV_BOARD_PIXVIEWPLAYTV] = { 566 .name = "Prolink Pixelview PlayTV (bt878)", 567 .video_inputs = 3, 568 /* .audio_inputs= 1, */ 569 .svhs = 2, 570 .gpiomask = 0x01fe00, 571 .muxsel = MUXSEL(2, 3, 1, 1), 572 /* 2003-10-20 by "Anton A. Arapov" <arapov@mail.ru> */ 573 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, 574 .gpiomute = 0x002000, 575 .pll = PLL_28, 576 .tuner_type = UNSET, 577 .tuner_addr = ADDR_UNSET, 578 }, 579 [BTTV_BOARD_WINVIEW_601] = { 580 .name = "Leadtek WinView 601", 581 .video_inputs = 3, 582 /* .audio_inputs= 1, */ 583 .svhs = 2, 584 .gpiomask = 0x8300f8, 585 .muxsel = MUXSEL(2, 3, 1, 1, 0), 586 .gpiomux = { 0x4fa007,0xcfa007,0xcfa007,0xcfa007 }, 587 .gpiomute = 0xcfa007, 588 .tuner_type = UNSET, 589 .tuner_addr = ADDR_UNSET, 590 .volume_gpio = winview_volume, 591 .has_radio = 1, 592 }, 593 [BTTV_BOARD_AVEC_INTERCAP] = { 594 .name = "AVEC Intercapture", 595 .video_inputs = 3, 596 /* .audio_inputs= 2, */ 597 .svhs = 2, 598 .gpiomask = 0, 599 .muxsel = MUXSEL(2, 3, 1, 1), 600 .gpiomux = { 1, 0, 0, 0 }, 601 .tuner_type = UNSET, 602 .tuner_addr = ADDR_UNSET, 603 }, 604 [BTTV_BOARD_LIFE_FLYKIT] = { 605 .name = "Lifeview FlyVideo II EZ /FlyKit LR38 Bt848 (capture only)", 606 .video_inputs = 4, 607 /* .audio_inputs= 1, */ 608 .svhs = NO_SVHS, 609 .gpiomask = 0x8dff00, 610 .muxsel = MUXSEL(2, 3, 1, 1), 611 .gpiomux = { 0 }, 612 .no_msp34xx = 1, 613 .tuner_type = TUNER_ABSENT, 614 .tuner_addr = ADDR_UNSET, 615 }, 616 617 /* ---- card 0x14 ---------------------------------- */ 618 [BTTV_BOARD_CEI_RAFFLES] = { 619 .name = "CEI Raffles Card", 620 .video_inputs = 3, 621 /* .audio_inputs= 3, */ 622 .svhs = 2, 623 .muxsel = MUXSEL(2, 3, 1, 1), 624 .tuner_type = UNSET, 625 .tuner_addr = ADDR_UNSET, 626 }, 627 [BTTV_BOARD_CONFERENCETV] = { 628 .name = "Lifeview FlyVideo 98/ Lucky Star Image World ConferenceTV LR50", 629 .video_inputs = 4, 630 /* .audio_inputs= 2, tuner, line in */ 631 .svhs = 2, 632 .gpiomask = 0x1800, 633 .muxsel = MUXSEL(2, 3, 1, 1), 634 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 635 .gpiomute = 0x1800, 636 .pll = PLL_28, 637 .tuner_type = TUNER_PHILIPS_PAL_I, 638 .tuner_addr = ADDR_UNSET, 639 }, 640 [BTTV_BOARD_PHOEBE_TVMAS] = { 641 .name = "Askey CPH050/ Phoebe Tv Master + FM", 642 .video_inputs = 3, 643 /* .audio_inputs= 1, */ 644 .svhs = 2, 645 .gpiomask = 0xc00, 646 .muxsel = MUXSEL(2, 3, 1, 1), 647 .gpiomux = { 0, 1, 0x800, 0x400 }, 648 .gpiomute = 0xc00, 649 .pll = PLL_28, 650 .tuner_type = UNSET, 651 .tuner_addr = ADDR_UNSET, 652 }, 653 [BTTV_BOARD_MODTEC_205] = { 654 .name = "Modular Technology MM201/MM202/MM205/MM210/MM215 PCTV, bt878", 655 .video_inputs = 3, 656 /* .audio_inputs= 1, */ 657 .svhs = NO_SVHS, 658 .has_dig_in = 1, 659 .gpiomask = 7, 660 .muxsel = MUXSEL(2, 3, 0), /* input 2 is digital */ 661 /* .digital_mode= DIGITAL_MODE_CAMERA, */ 662 .gpiomux = { 0, 0, 0, 0 }, 663 .no_msp34xx = 1, 664 .pll = PLL_28, 665 .tuner_type = TUNER_ALPS_TSBB5_PAL_I, 666 .tuner_addr = ADDR_UNSET, 667 }, 668 669 /* ---- card 0x18 ---------------------------------- */ 670 [BTTV_BOARD_MAGICTVIEW061] = { 671 .name = "Askey CPH05X/06X (bt878) [many vendors]", 672 .video_inputs = 3, 673 /* .audio_inputs= 1, */ 674 .svhs = 2, 675 .gpiomask = 0xe00, 676 .muxsel = MUXSEL(2, 3, 1, 1), 677 .gpiomux = {0x400, 0x400, 0x400, 0x400 }, 678 .gpiomute = 0xc00, 679 .pll = PLL_28, 680 .tuner_type = UNSET, 681 .tuner_addr = ADDR_UNSET, 682 .has_remote = 1, 683 .has_radio = 1, /* not every card has radio */ 684 }, 685 [BTTV_BOARD_VOBIS_BOOSTAR] = { 686 .name = "Terratec TerraTV+ Version 1.0 (Bt848)/ Terra TValue Version 1.0/ Vobis TV-Boostar", 687 .video_inputs = 3, 688 /* .audio_inputs= 1, */ 689 .svhs = 2, 690 .gpiomask = 0x1f0fff, 691 .muxsel = MUXSEL(2, 3, 1, 1), 692 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, 693 .gpiomute = 0x40000, 694 .tuner_type = TUNER_PHILIPS_PAL, 695 .tuner_addr = ADDR_UNSET, 696 .audio_mode_gpio= terratv_audio, 697 }, 698 [BTTV_BOARD_HAUPPAUG_WCAM] = { 699 .name = "Hauppauge WinCam newer (bt878)", 700 .video_inputs = 4, 701 /* .audio_inputs= 1, */ 702 .svhs = 3, 703 .gpiomask = 7, 704 .muxsel = MUXSEL(2, 0, 1, 1), 705 .gpiomux = { 0, 1, 2, 3 }, 706 .gpiomute = 4, 707 .tuner_type = UNSET, 708 .tuner_addr = ADDR_UNSET, 709 }, 710 [BTTV_BOARD_MAXI] = { 711 .name = "Lifeview FlyVideo 98/ MAXI TV Video PCI2 LR50", 712 .video_inputs = 4, 713 /* .audio_inputs= 2, */ 714 .svhs = 2, 715 .gpiomask = 0x1800, 716 .muxsel = MUXSEL(2, 3, 1, 1), 717 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 718 .gpiomute = 0x1800, 719 .pll = PLL_28, 720 .tuner_type = TUNER_PHILIPS_SECAM, 721 .tuner_addr = ADDR_UNSET, 722 }, 723 724 /* ---- card 0x1c ---------------------------------- */ 725 [BTTV_BOARD_TERRATV] = { 726 .name = "Terratec TerraTV+ Version 1.1 (bt878)", 727 .video_inputs = 3, 728 /* .audio_inputs= 1, */ 729 .svhs = 2, 730 .gpiomask = 0x1f0fff, 731 .muxsel = MUXSEL(2, 3, 1, 1), 732 .gpiomux = { 0x20000, 0x30000, 0x10000, 0x00000 }, 733 .gpiomute = 0x40000, 734 .tuner_type = TUNER_PHILIPS_PAL, 735 .tuner_addr = ADDR_UNSET, 736 .audio_mode_gpio= terratv_audio, 737 /* GPIO wiring: 738 External 20 pin connector (for Active Radio Upgrade board) 739 gpio00: i2c-sda 740 gpio01: i2c-scl 741 gpio02: om5610-data 742 gpio03: om5610-clk 743 gpio04: om5610-wre 744 gpio05: om5610-stereo 745 gpio06: rds6588-davn 746 gpio07: Pin 7 n.c. 747 gpio08: nIOW 748 gpio09+10: nIOR, nSEL ?? (bt878) 749 gpio09: nIOR (bt848) 750 gpio10: nSEL (bt848) 751 Sound Routing: 752 gpio16: u2-A0 (1st 4052bt) 753 gpio17: u2-A1 754 gpio18: u2-nEN 755 gpio19: u4-A0 (2nd 4052) 756 gpio20: u4-A1 757 u4-nEN - GND 758 Btspy: 759 00000 : Cdrom (internal audio input) 760 10000 : ext. Video audio input 761 20000 : TV Mono 762 a0000 : TV Mono/2 763 1a0000 : TV Stereo 764 30000 : Radio 765 40000 : Mute 766 */ 767 768 }, 769 [BTTV_BOARD_PXC200] = { 770 /* Jannik Fritsch <jannik@techfak.uni-bielefeld.de> */ 771 .name = "Imagenation PXC200", 772 .video_inputs = 5, 773 /* .audio_inputs= 1, */ 774 .svhs = 1, /* was: 4 */ 775 .gpiomask = 0, 776 .muxsel = MUXSEL(2, 3, 1, 0, 0), 777 .gpiomux = { 0 }, 778 .tuner_type = TUNER_ABSENT, 779 .tuner_addr = ADDR_UNSET, 780 .muxsel_hook = PXC200_muxsel, 781 782 }, 783 [BTTV_BOARD_FLYVIDEO_98] = { 784 .name = "Lifeview FlyVideo 98 LR50", 785 .video_inputs = 4, 786 /* .audio_inputs= 1, */ 787 .svhs = 2, 788 .gpiomask = 0x1800, /* 0x8dfe00 */ 789 .muxsel = MUXSEL(2, 3, 1, 1), 790 .gpiomux = { 0, 0x0800, 0x1000, 0x1000 }, 791 .gpiomute = 0x1800, 792 .pll = PLL_28, 793 .tuner_type = UNSET, 794 .tuner_addr = ADDR_UNSET, 795 }, 796 [BTTV_BOARD_IPROTV] = { 797 .name = "Formac iProTV, Formac ProTV I (bt848)", 798 .video_inputs = 4, 799 /* .audio_inputs= 1, */ 800 .svhs = 3, 801 .gpiomask = 1, 802 .muxsel = MUXSEL(2, 3, 1, 1), 803 .gpiomux = { 1, 0, 0, 0 }, 804 .pll = PLL_28, 805 .tuner_type = TUNER_PHILIPS_PAL, 806 .tuner_addr = ADDR_UNSET, 807 }, 808 809 /* ---- card 0x20 ---------------------------------- */ 810 [BTTV_BOARD_INTEL_C_S_PCI] = { 811 .name = "Intel Create and Share PCI/ Smart Video Recorder III", 812 .video_inputs = 4, 813 /* .audio_inputs= 0, */ 814 .svhs = 2, 815 .gpiomask = 0, 816 .muxsel = MUXSEL(2, 3, 1, 1), 817 .gpiomux = { 0 }, 818 .tuner_type = TUNER_ABSENT, 819 .tuner_addr = ADDR_UNSET, 820 }, 821 [BTTV_BOARD_TERRATVALUE] = { 822 .name = "Terratec TerraTValue Version Bt878", 823 .video_inputs = 3, 824 /* .audio_inputs= 1, */ 825 .svhs = 2, 826 .gpiomask = 0xffff00, 827 .muxsel = MUXSEL(2, 3, 1, 1), 828 .gpiomux = { 0x500, 0, 0x300, 0x900 }, 829 .gpiomute = 0x900, 830 .pll = PLL_28, 831 .tuner_type = TUNER_PHILIPS_PAL, 832 .tuner_addr = ADDR_UNSET, 833 }, 834 [BTTV_BOARD_WINFAST2000] = { 835 .name = "Leadtek WinFast 2000/ WinFast 2000 XP", 836 .video_inputs = 4, 837 /* .audio_inputs= 1, */ 838 .svhs = 2, 839 /* TV, CVid, SVid, CVid over SVid connector */ 840 .muxsel = MUXSEL(2, 3, 1, 1, 0), 841 /* Alexander Varakin <avarakin@hotmail.com> [stereo version] */ 842 .gpiomask = 0xb33000, 843 .gpiomux = { 0x122000,0x1000,0x0000,0x620000 }, 844 .gpiomute = 0x800000, 845 /* Audio Routing for "WinFast 2000 XP" (no tv stereo !) 846 gpio23 -- hef4052:nEnable (0x800000) 847 gpio12 -- hef4052:A1 848 gpio13 -- hef4052:A0 849 0x0000: external audio 850 0x1000: FM 851 0x2000: TV 852 0x3000: n.c. 853 Note: There exists another variant "Winfast 2000" with tv stereo !? 854 Note: eeprom only contains FF and pci subsystem id 107d:6606 855 */ 856 .pll = PLL_28, 857 .has_radio = 1, 858 .tuner_type = TUNER_PHILIPS_PAL, /* default for now, gpio reads BFFF06 for Pal bg+dk */ 859 .tuner_addr = ADDR_UNSET, 860 .audio_mode_gpio= winfast2000_audio, 861 .has_remote = 1, 862 }, 863 [BTTV_BOARD_CHRONOS_VS2] = { 864 .name = "Lifeview FlyVideo 98 LR50 / Chronos Video Shuttle II", 865 .video_inputs = 4, 866 /* .audio_inputs= 3, */ 867 .svhs = 2, 868 .gpiomask = 0x1800, 869 .muxsel = MUXSEL(2, 3, 1, 1), 870 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 871 .gpiomute = 0x1800, 872 .pll = PLL_28, 873 .tuner_type = UNSET, 874 .tuner_addr = ADDR_UNSET, 875 }, 876 877 /* ---- card 0x24 ---------------------------------- */ 878 [BTTV_BOARD_TYPHOON_TVIEW] = { 879 .name = "Lifeview FlyVideo 98FM LR50 / Typhoon TView TV/FM Tuner", 880 .video_inputs = 4, 881 /* .audio_inputs= 3, */ 882 .svhs = 2, 883 .gpiomask = 0x1800, 884 .muxsel = MUXSEL(2, 3, 1, 1), 885 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 886 .gpiomute = 0x1800, 887 .pll = PLL_28, 888 .tuner_type = UNSET, 889 .tuner_addr = ADDR_UNSET, 890 .has_radio = 1, 891 }, 892 [BTTV_BOARD_PXELVWPLTVPRO] = { 893 .name = "Prolink PixelView PlayTV pro", 894 .video_inputs = 3, 895 /* .audio_inputs= 1, */ 896 .svhs = 2, 897 .gpiomask = 0xff, 898 .muxsel = MUXSEL(2, 3, 1, 1), 899 .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, 900 .gpiomute = 0x29, 901 .no_msp34xx = 1, 902 .pll = PLL_28, 903 .tuner_type = UNSET, 904 .tuner_addr = ADDR_UNSET, 905 }, 906 [BTTV_BOARD_MAGICTVIEW063] = { 907 .name = "Askey CPH06X TView99", 908 .video_inputs = 4, 909 /* .audio_inputs= 1, */ 910 .svhs = 2, 911 .gpiomask = 0x551e00, 912 .muxsel = MUXSEL(2, 3, 1, 0), 913 .gpiomux = { 0x551400, 0x551200, 0, 0 }, 914 .gpiomute = 0x551c00, 915 .pll = PLL_28, 916 .tuner_type = TUNER_PHILIPS_PAL_I, 917 .tuner_addr = ADDR_UNSET, 918 .has_remote = 1, 919 }, 920 [BTTV_BOARD_PINNACLE] = { 921 .name = "Pinnacle PCTV Studio/Rave", 922 .video_inputs = 3, 923 /* .audio_inputs= 1, */ 924 .svhs = 2, 925 .gpiomask = 0x03000F, 926 .muxsel = MUXSEL(2, 3, 1, 1), 927 .gpiomux = { 2, 0xd0001, 0, 0 }, 928 .gpiomute = 1, 929 .pll = PLL_28, 930 .tuner_type = UNSET, 931 .tuner_addr = ADDR_UNSET, 932 }, 933 934 /* ---- card 0x28 ---------------------------------- */ 935 [BTTV_BOARD_STB2] = { 936 .name = "STB TV PCI FM, Gateway P/N 6000704 (bt878), 3Dfx VoodooTV 100", 937 .video_inputs = 3, 938 /* .audio_inputs= 1, */ 939 .svhs = 2, 940 .gpiomask = 7, 941 .muxsel = MUXSEL(2, 3, 1, 1), 942 .gpiomux = { 4, 0, 2, 3 }, 943 .gpiomute = 1, 944 .no_msp34xx = 1, 945 .tuner_type = TUNER_PHILIPS_NTSC, 946 .tuner_addr = ADDR_UNSET, 947 .pll = PLL_28, 948 .has_radio = 1, 949 }, 950 [BTTV_BOARD_AVPHONE98] = { 951 .name = "AVerMedia TVPhone 98", 952 .video_inputs = 3, 953 /* .audio_inputs= 4, */ 954 .svhs = 2, 955 .gpiomask = 15, 956 .muxsel = MUXSEL(2, 3, 1, 1), 957 .gpiomux = { 13, 4, 11, 7 }, 958 .pll = PLL_28, 959 .tuner_type = UNSET, 960 .tuner_addr = ADDR_UNSET, 961 .has_radio = 1, 962 .audio_mode_gpio= avermedia_tvphone_audio, 963 }, 964 [BTTV_BOARD_PV951] = { 965 .name = "ProVideo PV951", /* pic16c54 */ 966 .video_inputs = 3, 967 /* .audio_inputs= 1, */ 968 .svhs = 2, 969 .gpiomask = 0, 970 .muxsel = MUXSEL(2, 3, 1, 1), 971 .gpiomux = { 0, 0, 0, 0}, 972 .no_msp34xx = 1, 973 .pll = PLL_28, 974 .tuner_type = TUNER_PHILIPS_PAL_I, 975 .tuner_addr = ADDR_UNSET, 976 }, 977 [BTTV_BOARD_ONAIR_TV] = { 978 .name = "Little OnAir TV", 979 .video_inputs = 3, 980 /* .audio_inputs= 1, */ 981 .svhs = 2, 982 .gpiomask = 0xe00b, 983 .muxsel = MUXSEL(2, 3, 1, 1), 984 .gpiomux = { 0xff9ff6, 0xff9ff6, 0xff1ff7, 0 }, 985 .gpiomute = 0xff3ffc, 986 .no_msp34xx = 1, 987 .tuner_type = UNSET, 988 .tuner_addr = ADDR_UNSET, 989 }, 990 991 /* ---- card 0x2c ---------------------------------- */ 992 [BTTV_BOARD_SIGMA_TVII_FM] = { 993 .name = "Sigma TVII-FM", 994 .video_inputs = 2, 995 /* .audio_inputs= 1, */ 996 .svhs = NO_SVHS, 997 .gpiomask = 3, 998 .muxsel = MUXSEL(2, 3, 1, 1), 999 .gpiomux = { 1, 1, 0, 2 }, 1000 .gpiomute = 3, 1001 .no_msp34xx = 1, 1002 .pll = PLL_NONE, 1003 .tuner_type = UNSET, 1004 .tuner_addr = ADDR_UNSET, 1005 }, 1006 [BTTV_BOARD_MATRIX_VISION2] = { 1007 .name = "MATRIX-Vision MV-Delta 2", 1008 .video_inputs = 5, 1009 /* .audio_inputs= 1, */ 1010 .svhs = 3, 1011 .gpiomask = 0, 1012 .muxsel = MUXSEL(2, 3, 1, 0, 0), 1013 .gpiomux = { 0 }, 1014 .no_msp34xx = 1, 1015 .pll = PLL_28, 1016 .tuner_type = TUNER_ABSENT, 1017 .tuner_addr = ADDR_UNSET, 1018 }, 1019 [BTTV_BOARD_ZOLTRIX_GENIE] = { 1020 .name = "Zoltrix Genie TV/FM", 1021 .video_inputs = 3, 1022 /* .audio_inputs= 1, */ 1023 .svhs = 2, 1024 .gpiomask = 0xbcf03f, 1025 .muxsel = MUXSEL(2, 3, 1, 1), 1026 .gpiomux = { 0xbc803f, 0xbc903f, 0xbcb03f, 0 }, 1027 .gpiomute = 0xbcb03f, 1028 .no_msp34xx = 1, 1029 .pll = PLL_28, 1030 .tuner_type = TUNER_TEMIC_4039FR5_NTSC, 1031 .tuner_addr = ADDR_UNSET, 1032 }, 1033 [BTTV_BOARD_TERRATVRADIO] = { 1034 .name = "Terratec TV/Radio+", 1035 .video_inputs = 3, 1036 /* .audio_inputs= 1, */ 1037 .svhs = 2, 1038 .gpiomask = 0x70000, 1039 .muxsel = MUXSEL(2, 3, 1, 1), 1040 .gpiomux = { 0x20000, 0x30000, 0x10000, 0 }, 1041 .gpiomute = 0x40000, 1042 .no_msp34xx = 1, 1043 .pll = PLL_35, 1044 .tuner_type = TUNER_PHILIPS_PAL_I, 1045 .tuner_addr = ADDR_UNSET, 1046 .has_radio = 1, 1047 }, 1048 1049 /* ---- card 0x30 ---------------------------------- */ 1050 [BTTV_BOARD_DYNALINK] = { 1051 .name = "Askey CPH03x/ Dynalink Magic TView", 1052 .video_inputs = 3, 1053 /* .audio_inputs= 1, */ 1054 .svhs = 2, 1055 .gpiomask = 15, 1056 .muxsel = MUXSEL(2, 3, 1, 1), 1057 .gpiomux = {2,0,0,0 }, 1058 .gpiomute = 1, 1059 .pll = PLL_28, 1060 .tuner_type = UNSET, 1061 .tuner_addr = ADDR_UNSET, 1062 }, 1063 [BTTV_BOARD_GVBCTV3PCI] = { 1064 .name = "IODATA GV-BCTV3/PCI", 1065 .video_inputs = 3, 1066 /* .audio_inputs= 1, */ 1067 .svhs = 2, 1068 .gpiomask = 0x010f00, 1069 .muxsel = MUXSEL(2, 3, 0, 0), 1070 .gpiomux = {0x10000, 0, 0x10000, 0 }, 1071 .no_msp34xx = 1, 1072 .pll = PLL_28, 1073 .tuner_type = TUNER_ALPS_TSHC6_NTSC, 1074 .tuner_addr = ADDR_UNSET, 1075 .audio_mode_gpio= gvbctv3pci_audio, 1076 }, 1077 [BTTV_BOARD_PXELVWPLTVPAK] = { 1078 .name = "Prolink PV-BT878P+4E / PixelView PlayTV PAK / Lenco MXTV-9578 CP", 1079 .video_inputs = 5, 1080 /* .audio_inputs= 1, */ 1081 .svhs = 3, 1082 .has_dig_in = 1, 1083 .gpiomask = 0xAA0000, 1084 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */ 1085 /* .digital_mode= DIGITAL_MODE_CAMERA, */ 1086 .gpiomux = { 0x20000, 0, 0x80000, 0x80000 }, 1087 .gpiomute = 0xa8000, 1088 .no_msp34xx = 1, 1089 .pll = PLL_28, 1090 .tuner_type = TUNER_PHILIPS_PAL_I, 1091 .tuner_addr = ADDR_UNSET, 1092 .has_remote = 1, 1093 /* GPIO wiring: (different from Rev.4C !) 1094 GPIO17: U4.A0 (first hef4052bt) 1095 GPIO19: U4.A1 1096 GPIO20: U5.A1 (second hef4052bt) 1097 GPIO21: U4.nEN 1098 GPIO22: BT832 Reset Line 1099 GPIO23: A5,A0, U5,nEN 1100 Note: At i2c=0x8a is a Bt832 chip, which changes to 0x88 after being reset via GPIO22 1101 */ 1102 }, 1103 [BTTV_BOARD_EAGLE] = { 1104 .name = "Eagle Wireless Capricorn2 (bt878A)", 1105 .video_inputs = 4, 1106 /* .audio_inputs= 1, */ 1107 .svhs = 2, 1108 .gpiomask = 7, 1109 .muxsel = MUXSEL(2, 0, 1, 1), 1110 .gpiomux = { 0, 1, 2, 3 }, 1111 .gpiomute = 4, 1112 .pll = PLL_28, 1113 .tuner_type = UNSET /* TUNER_ALPS_TMDH2_NTSC */, 1114 .tuner_addr = ADDR_UNSET, 1115 }, 1116 1117 /* ---- card 0x34 ---------------------------------- */ 1118 [BTTV_BOARD_PINNACLEPRO] = { 1119 /* David Härdeman <david@2gen.com> */ 1120 .name = "Pinnacle PCTV Studio Pro", 1121 .video_inputs = 4, 1122 /* .audio_inputs= 1, */ 1123 .svhs = 3, 1124 .gpiomask = 0x03000F, 1125 .muxsel = MUXSEL(2, 3, 1, 1), 1126 .gpiomux = { 1, 0xd0001, 0, 0 }, 1127 .gpiomute = 10, 1128 /* sound path (5 sources): 1129 MUX1 (mask 0x03), Enable Pin 0x08 (0=enable, 1=disable) 1130 0= ext. Audio IN 1131 1= from MUX2 1132 2= Mono TV sound from Tuner 1133 3= not connected 1134 MUX2 (mask 0x30000): 1135 0,2,3= from MSP34xx 1136 1= FM stereo Radio from Tuner */ 1137 .pll = PLL_28, 1138 .tuner_type = UNSET, 1139 .tuner_addr = ADDR_UNSET, 1140 }, 1141 [BTTV_BOARD_TVIEW_RDS_FM] = { 1142 /* Claas Langbehn <claas@bigfoot.com>, 1143 Sven Grothklags <sven@upb.de> */ 1144 .name = "Typhoon TView RDS + FM Stereo / KNC1 TV Station RDS", 1145 .video_inputs = 4, 1146 /* .audio_inputs= 3, */ 1147 .svhs = 2, 1148 .gpiomask = 0x1c, 1149 .muxsel = MUXSEL(2, 3, 1, 1), 1150 .gpiomux = { 0, 0, 0x10, 8 }, 1151 .gpiomute = 4, 1152 .pll = PLL_28, 1153 .tuner_type = TUNER_PHILIPS_PAL, 1154 .tuner_addr = ADDR_UNSET, 1155 .has_radio = 1, 1156 }, 1157 [BTTV_BOARD_LIFETEC_9415] = { 1158 /* Tim Röstermundt <rosterm@uni-muenster.de> 1159 in de.comp.os.unix.linux.hardware: 1160 options bttv card=0 pll=1 radio=1 gpiomask=0x18e0 1161 gpiomux =0x44c71f,0x44d71f,0,0x44d71f,0x44dfff 1162 options tuner type=5 */ 1163 .name = "Lifeview FlyVideo 2000 /FlyVideo A2/ Lifetec LT 9415 TV [LR90]", 1164 .video_inputs = 4, 1165 /* .audio_inputs= 1, */ 1166 .svhs = 2, 1167 .gpiomask = 0x18e0, 1168 .muxsel = MUXSEL(2, 3, 1, 1), 1169 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, 1170 .gpiomute = 0x18e0, 1171 /* For cards with tda9820/tda9821: 1172 0x0000: Tuner normal stereo 1173 0x0080: Tuner A2 SAP (second audio program = Zweikanalton) 1174 0x0880: Tuner A2 stereo */ 1175 .pll = PLL_28, 1176 .tuner_type = UNSET, 1177 .tuner_addr = ADDR_UNSET, 1178 }, 1179 [BTTV_BOARD_BESTBUY_EASYTV] = { 1180 /* Miguel Angel Alvarez <maacruz@navegalia.com> 1181 old Easy TV BT848 version (model CPH031) */ 1182 .name = "Askey CPH031/ BESTBUY Easy TV", 1183 .video_inputs = 4, 1184 /* .audio_inputs= 1, */ 1185 .svhs = 2, 1186 .gpiomask = 0xF, 1187 .muxsel = MUXSEL(2, 3, 1, 0), 1188 .gpiomux = { 2, 0, 0, 0 }, 1189 .gpiomute = 10, 1190 .pll = PLL_28, 1191 .tuner_type = TUNER_TEMIC_PAL, 1192 .tuner_addr = ADDR_UNSET, 1193 }, 1194 1195 /* ---- card 0x38 ---------------------------------- */ 1196 [BTTV_BOARD_FLYVIDEO_98FM] = { 1197 /* Gordon Heydon <gjheydon@bigfoot.com ('98) */ 1198 .name = "Lifeview FlyVideo 98FM LR50", 1199 .video_inputs = 4, 1200 /* .audio_inputs= 3, */ 1201 .svhs = 2, 1202 .gpiomask = 0x1800, 1203 .muxsel = MUXSEL(2, 3, 1, 1), 1204 .gpiomux = { 0, 0x800, 0x1000, 0x1000 }, 1205 .gpiomute = 0x1800, 1206 .pll = PLL_28, 1207 .tuner_type = TUNER_PHILIPS_PAL, 1208 .tuner_addr = ADDR_UNSET, 1209 }, 1210 /* This is the ultimate cheapo capture card 1211 * just a BT848A on a small PCB! 1212 * Steve Hosgood <steve@equiinet.com> */ 1213 [BTTV_BOARD_GRANDTEC] = { 1214 .name = "GrandTec 'Grand Video Capture' (Bt848)", 1215 .video_inputs = 2, 1216 /* .audio_inputs= 0, */ 1217 .svhs = 1, 1218 .gpiomask = 0, 1219 .muxsel = MUXSEL(3, 1), 1220 .gpiomux = { 0 }, 1221 .no_msp34xx = 1, 1222 .pll = PLL_35, 1223 .tuner_type = TUNER_ABSENT, 1224 .tuner_addr = ADDR_UNSET, 1225 }, 1226 [BTTV_BOARD_ASKEY_CPH060] = { 1227 /* Daniel Herrington <daniel.herrington@home.com> */ 1228 .name = "Askey CPH060/ Phoebe TV Master Only (No FM)", 1229 .video_inputs = 3, 1230 /* .audio_inputs= 1, */ 1231 .svhs = 2, 1232 .gpiomask = 0xe00, 1233 .muxsel = MUXSEL(2, 3, 1, 1), 1234 .gpiomux = { 0x400, 0x400, 0x400, 0x400 }, 1235 .gpiomute = 0x800, 1236 .pll = PLL_28, 1237 .tuner_type = TUNER_TEMIC_4036FY5_NTSC, 1238 .tuner_addr = ADDR_UNSET, 1239 }, 1240 [BTTV_BOARD_ASKEY_CPH03X] = { 1241 /* Matti Mottus <mottus@physic.ut.ee> */ 1242 .name = "Askey CPH03x TV Capturer", 1243 .video_inputs = 4, 1244 /* .audio_inputs= 1, */ 1245 .svhs = 2, 1246 .gpiomask = 0x03000F, 1247 .muxsel = MUXSEL(2, 3, 1, 0), 1248 .gpiomux = { 2, 0, 0, 0 }, 1249 .gpiomute = 1, 1250 .pll = PLL_28, 1251 .tuner_type = TUNER_TEMIC_PAL, 1252 .tuner_addr = ADDR_UNSET, 1253 .has_remote = 1, 1254 }, 1255 1256 /* ---- card 0x3c ---------------------------------- */ 1257 [BTTV_BOARD_MM100PCTV] = { 1258 /* Philip Blundell <philb@gnu.org> */ 1259 .name = "Modular Technology MM100PCTV", 1260 .video_inputs = 2, 1261 /* .audio_inputs= 2, */ 1262 .svhs = NO_SVHS, 1263 .gpiomask = 11, 1264 .muxsel = MUXSEL(2, 3, 1, 1), 1265 .gpiomux = { 2, 0, 0, 1 }, 1266 .gpiomute = 8, 1267 .pll = PLL_35, 1268 .tuner_type = TUNER_TEMIC_PAL, 1269 .tuner_addr = ADDR_UNSET, 1270 }, 1271 [BTTV_BOARD_GMV1] = { 1272 /* Adrian Cox <adrian@humboldt.co.uk */ 1273 .name = "AG Electronics GMV1", 1274 .video_inputs = 2, 1275 /* .audio_inputs= 0, */ 1276 .svhs = 1, 1277 .gpiomask = 0xF, 1278 .muxsel = MUXSEL(2, 2), 1279 .gpiomux = { }, 1280 .no_msp34xx = 1, 1281 .pll = PLL_28, 1282 .tuner_type = TUNER_ABSENT, 1283 .tuner_addr = ADDR_UNSET, 1284 }, 1285 [BTTV_BOARD_BESTBUY_EASYTV2] = { 1286 /* Miguel Angel Alvarez <maacruz@navegalia.com> 1287 new Easy TV BT878 version (model CPH061) 1288 special thanks to Informatica Mieres for providing the card */ 1289 .name = "Askey CPH061/ BESTBUY Easy TV (bt878)", 1290 .video_inputs = 3, 1291 /* .audio_inputs= 2, */ 1292 .svhs = 2, 1293 .gpiomask = 0xFF, 1294 .muxsel = MUXSEL(2, 3, 1, 0), 1295 .gpiomux = { 1, 0, 4, 4 }, 1296 .gpiomute = 9, 1297 .pll = PLL_28, 1298 .tuner_type = TUNER_PHILIPS_PAL, 1299 .tuner_addr = ADDR_UNSET, 1300 }, 1301 [BTTV_BOARD_ATI_TVWONDER] = { 1302 /* Lukas Gebauer <geby@volny.cz> */ 1303 .name = "ATI TV-Wonder", 1304 .video_inputs = 3, 1305 /* .audio_inputs= 1, */ 1306 .svhs = 2, 1307 .gpiomask = 0xf03f, 1308 .muxsel = MUXSEL(2, 3, 1, 0), 1309 .gpiomux = { 0xbffe, 0, 0xbfff, 0 }, 1310 .gpiomute = 0xbffe, 1311 .pll = PLL_28, 1312 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, 1313 .tuner_addr = ADDR_UNSET, 1314 }, 1315 1316 /* ---- card 0x40 ---------------------------------- */ 1317 [BTTV_BOARD_ATI_TVWONDERVE] = { 1318 /* Lukas Gebauer <geby@volny.cz> */ 1319 .name = "ATI TV-Wonder VE", 1320 .video_inputs = 2, 1321 /* .audio_inputs= 1, */ 1322 .svhs = NO_SVHS, 1323 .gpiomask = 1, 1324 .muxsel = MUXSEL(2, 3, 0, 1), 1325 .gpiomux = { 0, 0, 1, 0 }, 1326 .no_msp34xx = 1, 1327 .pll = PLL_28, 1328 .tuner_type = TUNER_TEMIC_4006FN5_MULTI_PAL, 1329 .tuner_addr = ADDR_UNSET, 1330 }, 1331 [BTTV_BOARD_FLYVIDEO2000] = { 1332 /* DeeJay <deejay@westel900.net (2000S) */ 1333 .name = "Lifeview FlyVideo 2000S LR90", 1334 .video_inputs = 3, 1335 /* .audio_inputs= 3, */ 1336 .svhs = 2, 1337 .gpiomask = 0x18e0, 1338 .muxsel = MUXSEL(2, 3, 0, 1), 1339 /* Radio changed from 1e80 to 0x800 to make 1340 FlyVideo2000S in .hu happy (gm)*/ 1341 /* -dk-???: set mute=0x1800 for tda9874h daughterboard */ 1342 .gpiomux = { 0x0000,0x0800,0x1000,0x1000 }, 1343 .gpiomute = 0x1800, 1344 .audio_mode_gpio= fv2000s_audio, 1345 .no_msp34xx = 1, 1346 .pll = PLL_28, 1347 .tuner_type = TUNER_PHILIPS_PAL, 1348 .tuner_addr = ADDR_UNSET, 1349 }, 1350 [BTTV_BOARD_TERRATVALUER] = { 1351 .name = "Terratec TValueRadio", 1352 .video_inputs = 3, 1353 /* .audio_inputs= 1, */ 1354 .svhs = 2, 1355 .gpiomask = 0xffff00, 1356 .muxsel = MUXSEL(2, 3, 1, 1), 1357 .gpiomux = { 0x500, 0x500, 0x300, 0x900 }, 1358 .gpiomute = 0x900, 1359 .pll = PLL_28, 1360 .tuner_type = TUNER_PHILIPS_PAL, 1361 .tuner_addr = ADDR_UNSET, 1362 .has_radio = 1, 1363 }, 1364 [BTTV_BOARD_GVBCTV4PCI] = { 1365 /* TANAKA Kei <peg00625@nifty.com> */ 1366 .name = "IODATA GV-BCTV4/PCI", 1367 .video_inputs = 3, 1368 /* .audio_inputs= 1, */ 1369 .svhs = 2, 1370 .gpiomask = 0x010f00, 1371 .muxsel = MUXSEL(2, 3, 0, 0), 1372 .gpiomux = {0x10000, 0, 0x10000, 0 }, 1373 .no_msp34xx = 1, 1374 .pll = PLL_28, 1375 .tuner_type = TUNER_SHARP_2U5JF5540_NTSC, 1376 .tuner_addr = ADDR_UNSET, 1377 .audio_mode_gpio= gvbctv3pci_audio, 1378 }, 1379 1380 /* ---- card 0x44 ---------------------------------- */ 1381 [BTTV_BOARD_VOODOOTV_FM] = { 1382 .name = "3Dfx VoodooTV FM (Euro)", 1383 /* try "insmod msp3400 simple=0" if you have 1384 * sound problems with this card. */ 1385 .video_inputs = 4, 1386 /* .audio_inputs= 1, */ 1387 .svhs = NO_SVHS, 1388 .gpiomask = 0x4f8a00, 1389 /* 0x100000: 1=MSP enabled (0=disable again) 1390 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ 1391 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, 1392 .gpiomute = 0x947fff, 1393 /* tvtuner, radio, external,internal, mute, stereo 1394 * tuner, Composit, SVid, Composit-on-Svid-adapter */ 1395 .muxsel = MUXSEL(2, 3, 0, 1), 1396 .tuner_type = TUNER_MT2032, 1397 .tuner_addr = ADDR_UNSET, 1398 .pll = PLL_28, 1399 .has_radio = 1, 1400 }, 1401 [BTTV_BOARD_VOODOOTV_200] = { 1402 .name = "VoodooTV 200 (USA)", 1403 /* try "insmod msp3400 simple=0" if you have 1404 * sound problems with this card. */ 1405 .video_inputs = 4, 1406 /* .audio_inputs= 1, */ 1407 .svhs = NO_SVHS, 1408 .gpiomask = 0x4f8a00, 1409 /* 0x100000: 1=MSP enabled (0=disable again) 1410 * 0x010000: Connected to "S0" on tda9880 (0=Pal/BG, 1=NTSC) */ 1411 .gpiomux = {0x947fff, 0x987fff,0x947fff,0x947fff }, 1412 .gpiomute = 0x947fff, 1413 /* tvtuner, radio, external,internal, mute, stereo 1414 * tuner, Composit, SVid, Composit-on-Svid-adapter */ 1415 .muxsel = MUXSEL(2, 3, 0, 1), 1416 .tuner_type = TUNER_MT2032, 1417 .tuner_addr = ADDR_UNSET, 1418 .pll = PLL_28, 1419 .has_radio = 1, 1420 }, 1421 [BTTV_BOARD_AIMMS] = { 1422 /* Philip Blundell <pb@nexus.co.uk> */ 1423 .name = "Active Imaging AIMMS", 1424 .video_inputs = 1, 1425 /* .audio_inputs= 0, */ 1426 .tuner_type = TUNER_ABSENT, 1427 .tuner_addr = ADDR_UNSET, 1428 .pll = PLL_28, 1429 .muxsel = MUXSEL(2), 1430 .gpiomask = 0 1431 }, 1432 [BTTV_BOARD_PV_BT878P_PLUS] = { 1433 /* Tomasz Pyra <hellfire@sedez.iq.pl> */ 1434 .name = "Prolink Pixelview PV-BT878P+ (Rev.4C,8E)", 1435 .video_inputs = 3, 1436 /* .audio_inputs= 4, */ 1437 .svhs = 2, 1438 .gpiomask = 15, 1439 .muxsel = MUXSEL(2, 3, 1, 1), 1440 .gpiomux = { 0, 0, 11, 7 }, /* TV and Radio with same GPIO ! */ 1441 .gpiomute = 13, 1442 .pll = PLL_28, 1443 .tuner_type = TUNER_LG_PAL_I_FM, 1444 .tuner_addr = ADDR_UNSET, 1445 .has_remote = 1, 1446 /* GPIO wiring: 1447 GPIO0: U4.A0 (hef4052bt) 1448 GPIO1: U4.A1 1449 GPIO2: U4.A1 (second hef4052bt) 1450 GPIO3: U4.nEN, U5.A0, A5.nEN 1451 GPIO8-15: vrd866b ? 1452 */ 1453 }, 1454 [BTTV_BOARD_FLYVIDEO98EZ] = { 1455 .name = "Lifeview FlyVideo 98EZ (capture only) LR51", 1456 .video_inputs = 4, 1457 /* .audio_inputs= 0, */ 1458 .svhs = 2, 1459 /* AV1, AV2, SVHS, CVid adapter on SVHS */ 1460 .muxsel = MUXSEL(2, 3, 1, 1), 1461 .pll = PLL_28, 1462 .no_msp34xx = 1, 1463 .tuner_type = TUNER_ABSENT, 1464 .tuner_addr = ADDR_UNSET, 1465 }, 1466 1467 /* ---- card 0x48 ---------------------------------- */ 1468 [BTTV_BOARD_PV_BT878P_9B] = { 1469 /* Dariusz Kowalewski <darekk@automex.pl> */ 1470 .name = "Prolink Pixelview PV-BT878P+9B (PlayTV Pro rev.9B FM+NICAM)", 1471 .video_inputs = 4, 1472 /* .audio_inputs= 1, */ 1473 .svhs = 2, 1474 .gpiomask = 0x3f, 1475 .muxsel = MUXSEL(2, 3, 1, 1), 1476 .gpiomux = { 0x01, 0x00, 0x03, 0x03 }, 1477 .gpiomute = 0x09, 1478 .no_msp34xx = 1, 1479 .pll = PLL_28, 1480 .tuner_type = TUNER_PHILIPS_PAL, 1481 .tuner_addr = ADDR_UNSET, 1482 .audio_mode_gpio= pvbt878p9b_audio, /* Note: not all cards have stereo */ 1483 .has_radio = 1, /* Note: not all cards have radio */ 1484 .has_remote = 1, 1485 /* GPIO wiring: 1486 GPIO0: A0 hef4052 1487 GPIO1: A1 hef4052 1488 GPIO3: nEN hef4052 1489 GPIO8-15: vrd866b 1490 GPIO20,22,23: R30,R29,R28 1491 */ 1492 }, 1493 [BTTV_BOARD_SENSORAY311_611] = { 1494 /* Clay Kunz <ckunz@mail.arc.nasa.gov> */ 1495 /* you must jumper JP5 for the 311 card (PC/104+) to work */ 1496 .name = "Sensoray 311/611", 1497 .video_inputs = 5, 1498 /* .audio_inputs= 0, */ 1499 .svhs = 4, 1500 .gpiomask = 0, 1501 .muxsel = MUXSEL(2, 3, 1, 0, 0), 1502 .gpiomux = { 0 }, 1503 .tuner_type = TUNER_ABSENT, 1504 .tuner_addr = ADDR_UNSET, 1505 }, 1506 [BTTV_BOARD_RV605] = { 1507 /* Miguel Freitas <miguel@cetuc.puc-rio.br> */ 1508 .name = "RemoteVision MX (RV605)", 1509 .video_inputs = 16, 1510 /* .audio_inputs= 0, */ 1511 .svhs = NO_SVHS, 1512 .gpiomask = 0x00, 1513 .gpiomask2 = 0x07ff, 1514 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), 1515 .no_msp34xx = 1, 1516 .tuner_type = TUNER_ABSENT, 1517 .tuner_addr = ADDR_UNSET, 1518 .muxsel_hook = rv605_muxsel, 1519 }, 1520 [BTTV_BOARD_POWERCLR_MTV878] = { 1521 .name = "Powercolor MTV878/ MTV878R/ MTV878F", 1522 .video_inputs = 3, 1523 /* .audio_inputs= 2, */ 1524 .svhs = 2, 1525 .gpiomask = 0x1C800F, /* Bit0-2: Audio select, 8-12:remote control 14:remote valid 15:remote reset */ 1526 .muxsel = MUXSEL(2, 1, 1), 1527 .gpiomux = { 0, 1, 2, 2 }, 1528 .gpiomute = 4, 1529 .tuner_type = TUNER_PHILIPS_PAL, 1530 .tuner_addr = ADDR_UNSET, 1531 .pll = PLL_28, 1532 .has_radio = 1, 1533 }, 1534 1535 /* ---- card 0x4c ---------------------------------- */ 1536 [BTTV_BOARD_WINDVR] = { 1537 /* Masaki Suzuki <masaki@btree.org> */ 1538 .name = "Canopus WinDVR PCI (COMPAQ Presario 3524JP, 5112JP)", 1539 .video_inputs = 3, 1540 /* .audio_inputs= 1, */ 1541 .svhs = 2, 1542 .gpiomask = 0x140007, 1543 .muxsel = MUXSEL(2, 3, 1, 1), 1544 .gpiomux = { 0, 1, 2, 3 }, 1545 .gpiomute = 4, 1546 .tuner_type = TUNER_PHILIPS_NTSC, 1547 .tuner_addr = ADDR_UNSET, 1548 .audio_mode_gpio= windvr_audio, 1549 }, 1550 [BTTV_BOARD_GRANDTEC_MULTI] = { 1551 .name = "GrandTec Multi Capture Card (Bt878)", 1552 .video_inputs = 4, 1553 /* .audio_inputs= 0, */ 1554 .svhs = NO_SVHS, 1555 .gpiomask = 0, 1556 .muxsel = MUXSEL(2, 3, 1, 0), 1557 .gpiomux = { 0 }, 1558 .no_msp34xx = 1, 1559 .pll = PLL_28, 1560 .tuner_type = TUNER_ABSENT, 1561 .tuner_addr = ADDR_UNSET, 1562 }, 1563 [BTTV_BOARD_KWORLD] = { 1564 .name = "Jetway TV/Capture JW-TV878-FBK, Kworld KW-TV878RF", 1565 .video_inputs = 4, 1566 /* .audio_inputs= 3, */ 1567 .svhs = 2, 1568 .gpiomask = 7, 1569 /* Tuner, SVid, SVHS, SVid to SVHS connector */ 1570 .muxsel = MUXSEL(2, 3, 1, 1), 1571 .gpiomux = { 0, 0, 4, 4 },/* Yes, this tuner uses the same audio output for TV and FM radio! 1572 * This card lacks external Audio In, so we mute it on Ext. & Int. 1573 * The PCB can take a sbx1637/sbx1673, wiring unknown. 1574 * This card lacks PCI subsystem ID, sigh. 1575 * gpiomux =1: lower volume, 2+3: mute 1576 * btwincap uses 0x80000/0x80003 1577 */ 1578 .gpiomute = 4, 1579 .no_msp34xx = 1, 1580 .pll = PLL_28, 1581 .tuner_type = TUNER_PHILIPS_PAL, 1582 .tuner_addr = ADDR_UNSET, 1583 /* Samsung TCPA9095PC27A (BG+DK), philips compatible, w/FM, stereo and 1584 radio signal strength indicators work fine. */ 1585 .has_radio = 1, 1586 /* GPIO Info: 1587 GPIO0,1: HEF4052 A0,A1 1588 GPIO2: HEF4052 nENABLE 1589 GPIO3-7: n.c. 1590 GPIO8-13: IRDC357 data0-5 (data6 n.c. ?) [chip not present on my card] 1591 GPIO14,15: ?? 1592 GPIO16-21: n.c. 1593 GPIO22,23: ?? 1594 ?? : mtu8b56ep microcontroller for IR (GPIO wiring unknown)*/ 1595 }, 1596 [BTTV_BOARD_DSP_TCVIDEO] = { 1597 /* Arthur Tetzlaff-Deas, DSP Design Ltd <software@dspdesign.com> */ 1598 .name = "DSP Design TCVIDEO", 1599 .video_inputs = 4, 1600 .svhs = NO_SVHS, 1601 .muxsel = MUXSEL(2, 3, 1, 0), 1602 .pll = PLL_28, 1603 .tuner_type = UNSET, 1604 .tuner_addr = ADDR_UNSET, 1605 }, 1606 1607 /* ---- card 0x50 ---------------------------------- */ 1608 [BTTV_BOARD_HAUPPAUGEPVR] = { 1609 .name = "Hauppauge WinTV PVR", 1610 .video_inputs = 4, 1611 /* .audio_inputs= 1, */ 1612 .svhs = 2, 1613 .muxsel = MUXSEL(2, 0, 1, 1), 1614 .pll = PLL_28, 1615 .tuner_type = UNSET, 1616 .tuner_addr = ADDR_UNSET, 1617 1618 .gpiomask = 7, 1619 .gpiomux = {7}, 1620 }, 1621 [BTTV_BOARD_GVBCTV5PCI] = { 1622 .name = "IODATA GV-BCTV5/PCI", 1623 .video_inputs = 3, 1624 /* .audio_inputs= 1, */ 1625 .svhs = 2, 1626 .gpiomask = 0x0f0f80, 1627 .muxsel = MUXSEL(2, 3, 1, 0), 1628 .gpiomux = {0x030000, 0x010000, 0, 0 }, 1629 .gpiomute = 0x020000, 1630 .no_msp34xx = 1, 1631 .pll = PLL_28, 1632 .tuner_type = TUNER_PHILIPS_NTSC_M, 1633 .tuner_addr = ADDR_UNSET, 1634 .audio_mode_gpio= gvbctv5pci_audio, 1635 .has_radio = 1, 1636 }, 1637 [BTTV_BOARD_OSPREY1x0] = { 1638 .name = "Osprey 100/150 (878)", /* 0x1(2|3)-45C6-C1 */ 1639 .video_inputs = 4, /* id-inputs-clock */ 1640 /* .audio_inputs= 0, */ 1641 .svhs = 3, 1642 .muxsel = MUXSEL(3, 2, 0, 1), 1643 .pll = PLL_28, 1644 .tuner_type = TUNER_ABSENT, 1645 .tuner_addr = ADDR_UNSET, 1646 .no_msp34xx = 1, 1647 .no_tda7432 = 1, 1648 }, 1649 [BTTV_BOARD_OSPREY1x0_848] = { 1650 .name = "Osprey 100/150 (848)", /* 0x04-54C0-C1 & older boards */ 1651 .video_inputs = 3, 1652 /* .audio_inputs= 0, */ 1653 .svhs = 2, 1654 .muxsel = MUXSEL(2, 3, 1), 1655 .pll = PLL_28, 1656 .tuner_type = TUNER_ABSENT, 1657 .tuner_addr = ADDR_UNSET, 1658 .no_msp34xx = 1, 1659 .no_tda7432 = 1, 1660 }, 1661 1662 /* ---- card 0x54 ---------------------------------- */ 1663 [BTTV_BOARD_OSPREY101_848] = { 1664 .name = "Osprey 101 (848)", /* 0x05-40C0-C1 */ 1665 .video_inputs = 2, 1666 /* .audio_inputs= 0, */ 1667 .svhs = 1, 1668 .muxsel = MUXSEL(3, 1), 1669 .pll = PLL_28, 1670 .tuner_type = TUNER_ABSENT, 1671 .tuner_addr = ADDR_UNSET, 1672 .no_msp34xx = 1, 1673 .no_tda7432 = 1, 1674 }, 1675 [BTTV_BOARD_OSPREY1x1] = { 1676 .name = "Osprey 101/151", /* 0x1(4|5)-0004-C4 */ 1677 .video_inputs = 1, 1678 /* .audio_inputs= 0, */ 1679 .svhs = NO_SVHS, 1680 .muxsel = MUXSEL(0), 1681 .pll = PLL_28, 1682 .tuner_type = TUNER_ABSENT, 1683 .tuner_addr = ADDR_UNSET, 1684 .no_msp34xx = 1, 1685 .no_tda7432 = 1, 1686 }, 1687 [BTTV_BOARD_OSPREY1x1_SVID] = { 1688 .name = "Osprey 101/151 w/ svid", /* 0x(16|17|20)-00C4-C1 */ 1689 .video_inputs = 2, 1690 /* .audio_inputs= 0, */ 1691 .svhs = 1, 1692 .muxsel = MUXSEL(0, 1), 1693 .pll = PLL_28, 1694 .tuner_type = TUNER_ABSENT, 1695 .tuner_addr = ADDR_UNSET, 1696 .no_msp34xx = 1, 1697 .no_tda7432 = 1, 1698 }, 1699 [BTTV_BOARD_OSPREY2xx] = { 1700 .name = "Osprey 200/201/250/251", /* 0x1(8|9|E|F)-0004-C4 */ 1701 .video_inputs = 1, 1702 /* .audio_inputs= 1, */ 1703 .svhs = NO_SVHS, 1704 .muxsel = MUXSEL(0), 1705 .pll = PLL_28, 1706 .tuner_type = TUNER_ABSENT, 1707 .tuner_addr = ADDR_UNSET, 1708 .no_msp34xx = 1, 1709 .no_tda7432 = 1, 1710 }, 1711 1712 /* ---- card 0x58 ---------------------------------- */ 1713 [BTTV_BOARD_OSPREY2x0_SVID] = { 1714 .name = "Osprey 200/250", /* 0x1(A|B)-00C4-C1 */ 1715 .video_inputs = 2, 1716 /* .audio_inputs= 1, */ 1717 .svhs = 1, 1718 .muxsel = MUXSEL(0, 1), 1719 .pll = PLL_28, 1720 .tuner_type = TUNER_ABSENT, 1721 .tuner_addr = ADDR_UNSET, 1722 .no_msp34xx = 1, 1723 .no_tda7432 = 1, 1724 }, 1725 [BTTV_BOARD_OSPREY2x0] = { 1726 .name = "Osprey 210/220/230", /* 0x1(A|B)-04C0-C1 */ 1727 .video_inputs = 2, 1728 /* .audio_inputs= 1, */ 1729 .svhs = 1, 1730 .muxsel = MUXSEL(2, 3), 1731 .pll = PLL_28, 1732 .tuner_type = TUNER_ABSENT, 1733 .tuner_addr = ADDR_UNSET, 1734 .no_msp34xx = 1, 1735 .no_tda7432 = 1, 1736 }, 1737 [BTTV_BOARD_OSPREY500] = { 1738 .name = "Osprey 500", /* 500 */ 1739 .video_inputs = 2, 1740 /* .audio_inputs= 1, */ 1741 .svhs = 1, 1742 .muxsel = MUXSEL(2, 3), 1743 .pll = PLL_28, 1744 .tuner_type = TUNER_ABSENT, 1745 .tuner_addr = ADDR_UNSET, 1746 .no_msp34xx = 1, 1747 .no_tda7432 = 1, 1748 }, 1749 [BTTV_BOARD_OSPREY540] = { 1750 .name = "Osprey 540", /* 540 */ 1751 .video_inputs = 4, 1752 /* .audio_inputs= 1, */ 1753 .pll = PLL_28, 1754 .tuner_type = TUNER_ABSENT, 1755 .tuner_addr = ADDR_UNSET, 1756 .no_msp34xx = 1, 1757 .no_tda7432 = 1, 1758 }, 1759 1760 /* ---- card 0x5C ---------------------------------- */ 1761 [BTTV_BOARD_OSPREY2000] = { 1762 .name = "Osprey 2000", /* 2000 */ 1763 .video_inputs = 2, 1764 /* .audio_inputs= 1, */ 1765 .svhs = 1, 1766 .muxsel = MUXSEL(2, 3), 1767 .pll = PLL_28, 1768 .tuner_type = TUNER_ABSENT, 1769 .tuner_addr = ADDR_UNSET, 1770 .no_msp34xx = 1, 1771 .no_tda7432 = 1, /* must avoid, conflicts with the bt860 */ 1772 }, 1773 [BTTV_BOARD_IDS_EAGLE] = { 1774 /* M G Berberich <berberic@forwiss.uni-passau.de> */ 1775 .name = "IDS Eagle", 1776 .video_inputs = 4, 1777 /* .audio_inputs= 0, */ 1778 .tuner_type = TUNER_ABSENT, 1779 .tuner_addr = ADDR_UNSET, 1780 .svhs = NO_SVHS, 1781 .gpiomask = 0, 1782 .muxsel = MUXSEL(2, 2, 2, 2), 1783 .muxsel_hook = eagle_muxsel, 1784 .no_msp34xx = 1, 1785 .pll = PLL_28, 1786 }, 1787 [BTTV_BOARD_PINNACLESAT] = { 1788 .name = "Pinnacle PCTV Sat", 1789 .video_inputs = 2, 1790 /* .audio_inputs= 0, */ 1791 .svhs = 1, 1792 .tuner_type = TUNER_ABSENT, 1793 .tuner_addr = ADDR_UNSET, 1794 .no_msp34xx = 1, 1795 .no_tda7432 = 1, 1796 .muxsel = MUXSEL(3, 1), 1797 .pll = PLL_28, 1798 .no_gpioirq = 1, 1799 .has_dvb = 1, 1800 }, 1801 [BTTV_BOARD_FORMAC_PROTV] = { 1802 .name = "Formac ProTV II (bt878)", 1803 .video_inputs = 4, 1804 /* .audio_inputs= 1, */ 1805 .svhs = 3, 1806 .gpiomask = 2, 1807 /* TV, Comp1, Composite over SVID con, SVID */ 1808 .muxsel = MUXSEL(2, 3, 1, 1), 1809 .gpiomux = { 2, 2, 0, 0 }, 1810 .pll = PLL_28, 1811 .has_radio = 1, 1812 .tuner_type = TUNER_PHILIPS_PAL, 1813 .tuner_addr = ADDR_UNSET, 1814 /* sound routing: 1815 GPIO=0x00,0x01,0x03: mute (?) 1816 0x02: both TV and radio (tuner: FM1216/I) 1817 The card has onboard audio connectors labeled "cdrom" and "board", 1818 not soldered here, though unknown wiring. 1819 Card lacks: external audio in, pci subsystem id. 1820 */ 1821 }, 1822 1823 /* ---- card 0x60 ---------------------------------- */ 1824 [BTTV_BOARD_MACHTV] = { 1825 .name = "MachTV", 1826 .video_inputs = 3, 1827 /* .audio_inputs= 1, */ 1828 .svhs = NO_SVHS, 1829 .gpiomask = 7, 1830 .muxsel = MUXSEL(2, 3, 1, 1), 1831 .gpiomux = { 0, 1, 2, 3}, 1832 .gpiomute = 4, 1833 .tuner_type = TUNER_PHILIPS_PAL, 1834 .tuner_addr = ADDR_UNSET, 1835 .pll = PLL_28, 1836 }, 1837 [BTTV_BOARD_EURESYS_PICOLO] = { 1838 .name = "Euresys Picolo", 1839 .video_inputs = 3, 1840 /* .audio_inputs= 0, */ 1841 .svhs = 2, 1842 .gpiomask = 0, 1843 .no_msp34xx = 1, 1844 .no_tda7432 = 1, 1845 .muxsel = MUXSEL(2, 0, 1), 1846 .pll = PLL_28, 1847 .tuner_type = TUNER_ABSENT, 1848 .tuner_addr = ADDR_UNSET, 1849 }, 1850 [BTTV_BOARD_PV150] = { 1851 /* Luc Van Hoeylandt <luc@e-magic.be> */ 1852 .name = "ProVideo PV150", /* 0x4f */ 1853 .video_inputs = 2, 1854 /* .audio_inputs= 0, */ 1855 .svhs = NO_SVHS, 1856 .gpiomask = 0, 1857 .muxsel = MUXSEL(2, 3), 1858 .gpiomux = { 0 }, 1859 .no_msp34xx = 1, 1860 .pll = PLL_28, 1861 .tuner_type = TUNER_ABSENT, 1862 .tuner_addr = ADDR_UNSET, 1863 }, 1864 [BTTV_BOARD_AD_TVK503] = { 1865 /* Hiroshi Takekawa <sian@big.or.jp> */ 1866 /* This card lacks subsystem ID */ 1867 .name = "AD-TVK503", /* 0x63 */ 1868 .video_inputs = 4, 1869 /* .audio_inputs= 1, */ 1870 .svhs = 2, 1871 .gpiomask = 0x001e8007, 1872 .muxsel = MUXSEL(2, 3, 1, 0), 1873 /* Tuner, Radio, external, internal, off, on */ 1874 .gpiomux = { 0x08, 0x0f, 0x0a, 0x08 }, 1875 .gpiomute = 0x0f, 1876 .no_msp34xx = 1, 1877 .pll = PLL_28, 1878 .tuner_type = TUNER_PHILIPS_NTSC, 1879 .tuner_addr = ADDR_UNSET, 1880 .audio_mode_gpio= adtvk503_audio, 1881 }, 1882 1883 /* ---- card 0x64 ---------------------------------- */ 1884 [BTTV_BOARD_HERCULES_SM_TV] = { 1885 .name = "Hercules Smart TV Stereo", 1886 .video_inputs = 4, 1887 /* .audio_inputs= 1, */ 1888 .svhs = 2, 1889 .gpiomask = 0x00, 1890 .muxsel = MUXSEL(2, 3, 1, 1), 1891 .no_msp34xx = 1, 1892 .pll = PLL_28, 1893 .tuner_type = TUNER_PHILIPS_PAL, 1894 .tuner_addr = ADDR_UNSET, 1895 /* Notes: 1896 - card lacks subsystem ID 1897 - stereo variant w/ daughter board with tda9874a @0xb0 1898 - Audio Routing: 1899 always from tda9874 independent of GPIO (?) 1900 external line in: unknown 1901 - Other chips: em78p156elp @ 0x96 (probably IR remote control) 1902 hef4053 (instead 4052) for unknown function 1903 */ 1904 }, 1905 [BTTV_BOARD_PACETV] = { 1906 .name = "Pace TV & Radio Card", 1907 .video_inputs = 4, 1908 /* .audio_inputs= 1, */ 1909 .svhs = 2, 1910 /* Tuner, CVid, SVid, CVid over SVid connector */ 1911 .muxsel = MUXSEL(2, 3, 1, 1), 1912 .gpiomask = 0, 1913 .no_tda7432 = 1, 1914 .tuner_type = TUNER_PHILIPS_PAL_I, 1915 .tuner_addr = ADDR_UNSET, 1916 .has_radio = 1, 1917 .pll = PLL_28, 1918 /* Bt878, Bt832, FI1246 tuner; no pci subsystem id 1919 only internal line out: (4pin header) RGGL 1920 Radio must be decoded by msp3410d (not routed through)*/ 1921 /* 1922 .digital_mode = DIGITAL_MODE_CAMERA, todo! 1923 */ 1924 }, 1925 [BTTV_BOARD_IVC200] = { 1926 /* Chris Willing <chris@vislab.usyd.edu.au> */ 1927 .name = "IVC-200", 1928 .video_inputs = 1, 1929 /* .audio_inputs= 0, */ 1930 .tuner_type = TUNER_ABSENT, 1931 .tuner_addr = ADDR_UNSET, 1932 .svhs = NO_SVHS, 1933 .gpiomask = 0xdf, 1934 .muxsel = MUXSEL(2), 1935 .pll = PLL_28, 1936 }, 1937 [BTTV_BOARD_IVCE8784] = { 1938 .name = "IVCE-8784", 1939 .video_inputs = 1, 1940 /* .audio_inputs= 0, */ 1941 .tuner_type = TUNER_ABSENT, 1942 .tuner_addr = ADDR_UNSET, 1943 .svhs = NO_SVHS, 1944 .gpiomask = 0xdf, 1945 .muxsel = MUXSEL(2), 1946 .pll = PLL_28, 1947 }, 1948 [BTTV_BOARD_XGUARD] = { 1949 .name = "Grand X-Guard / Trust 814PCI", 1950 .video_inputs = 16, 1951 /* .audio_inputs= 0, */ 1952 .svhs = NO_SVHS, 1953 .tuner_type = TUNER_ABSENT, 1954 .tuner_addr = ADDR_UNSET, 1955 .gpiomask2 = 0xff, 1956 .muxsel = MUXSEL(2,2,2,2, 3,3,3,3, 1,1,1,1, 0,0,0,0), 1957 .muxsel_hook = xguard_muxsel, 1958 .no_msp34xx = 1, 1959 .no_tda7432 = 1, 1960 .pll = PLL_28, 1961 }, 1962 1963 /* ---- card 0x68 ---------------------------------- */ 1964 [BTTV_BOARD_NEBULA_DIGITV] = { 1965 .name = "Nebula Electronics DigiTV", 1966 .video_inputs = 1, 1967 .svhs = NO_SVHS, 1968 .muxsel = MUXSEL(2, 3, 1, 0), 1969 .no_msp34xx = 1, 1970 .no_tda7432 = 1, 1971 .pll = PLL_28, 1972 .tuner_type = TUNER_ABSENT, 1973 .tuner_addr = ADDR_UNSET, 1974 .has_dvb = 1, 1975 .has_remote = 1, 1976 .gpiomask = 0x1b, 1977 .no_gpioirq = 1, 1978 }, 1979 [BTTV_BOARD_PV143] = { 1980 /* Jorge Boncompte - DTI2 <jorge@dti2.net> */ 1981 .name = "ProVideo PV143", 1982 .video_inputs = 4, 1983 /* .audio_inputs= 0, */ 1984 .svhs = NO_SVHS, 1985 .gpiomask = 0, 1986 .muxsel = MUXSEL(2, 3, 1, 0), 1987 .gpiomux = { 0 }, 1988 .no_msp34xx = 1, 1989 .pll = PLL_28, 1990 .tuner_type = TUNER_ABSENT, 1991 .tuner_addr = ADDR_UNSET, 1992 }, 1993 [BTTV_BOARD_VD009X1_VD011_MINIDIN] = { 1994 /* M.Klahr@phytec.de */ 1995 .name = "PHYTEC VD-009-X1 VD-011 MiniDIN (bt878)", 1996 .video_inputs = 4, 1997 /* .audio_inputs= 0, */ 1998 .svhs = 3, 1999 .gpiomask = 0x00, 2000 .muxsel = MUXSEL(2, 3, 1, 0), 2001 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2002 .pll = PLL_28, 2003 .tuner_type = TUNER_ABSENT, 2004 .tuner_addr = ADDR_UNSET, 2005 }, 2006 [BTTV_BOARD_VD009X1_VD011_COMBI] = { 2007 .name = "PHYTEC VD-009-X1 VD-011 Combi (bt878)", 2008 .video_inputs = 4, 2009 /* .audio_inputs= 0, */ 2010 .svhs = 3, 2011 .gpiomask = 0x00, 2012 .muxsel = MUXSEL(2, 3, 1, 1), 2013 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2014 .pll = PLL_28, 2015 .tuner_type = TUNER_ABSENT, 2016 .tuner_addr = ADDR_UNSET, 2017 }, 2018 2019 /* ---- card 0x6c ---------------------------------- */ 2020 [BTTV_BOARD_VD009_MINIDIN] = { 2021 .name = "PHYTEC VD-009 MiniDIN (bt878)", 2022 .video_inputs = 10, 2023 /* .audio_inputs= 0, */ 2024 .svhs = 9, 2025 .gpiomask = 0x00, 2026 .gpiomask2 = 0x03, /* used for external vodeo mux */ 2027 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 0), 2028 .muxsel_hook = phytec_muxsel, 2029 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2030 .pll = PLL_28, 2031 .tuner_type = TUNER_ABSENT, 2032 .tuner_addr = ADDR_UNSET, 2033 }, 2034 [BTTV_BOARD_VD009_COMBI] = { 2035 .name = "PHYTEC VD-009 Combi (bt878)", 2036 .video_inputs = 10, 2037 /* .audio_inputs= 0, */ 2038 .svhs = 9, 2039 .gpiomask = 0x00, 2040 .gpiomask2 = 0x03, /* used for external vodeo mux */ 2041 .muxsel = MUXSEL(2, 2, 2, 2, 3, 3, 3, 3, 1, 1), 2042 .muxsel_hook = phytec_muxsel, 2043 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2044 .pll = PLL_28, 2045 .tuner_type = TUNER_ABSENT, 2046 .tuner_addr = ADDR_UNSET, 2047 }, 2048 [BTTV_BOARD_IVC100] = { 2049 .name = "IVC-100", 2050 .video_inputs = 4, 2051 /* .audio_inputs= 0, */ 2052 .tuner_type = TUNER_ABSENT, 2053 .tuner_addr = ADDR_UNSET, 2054 .svhs = NO_SVHS, 2055 .gpiomask = 0xdf, 2056 .muxsel = MUXSEL(2, 3, 1, 0), 2057 .pll = PLL_28, 2058 }, 2059 [BTTV_BOARD_IVC120] = { 2060 /* IVC-120G - Alan Garfield <alan@fromorbit.com> */ 2061 .name = "IVC-120G", 2062 .video_inputs = 16, 2063 /* .audio_inputs= 0, */ 2064 .tuner_type = TUNER_ABSENT, 2065 .tuner_addr = ADDR_UNSET, 2066 .svhs = NO_SVHS, /* card has no svhs */ 2067 .no_msp34xx = 1, 2068 .no_tda7432 = 1, 2069 .gpiomask = 0x00, 2070 .muxsel = MUXSEL(0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0), 2071 .muxsel_hook = ivc120_muxsel, 2072 .pll = PLL_28, 2073 }, 2074 2075 /* ---- card 0x70 ---------------------------------- */ 2076 [BTTV_BOARD_PC_HDTV] = { 2077 .name = "pcHDTV HD-2000 TV", 2078 .video_inputs = 4, 2079 /* .audio_inputs= 1, */ 2080 .svhs = 2, 2081 .muxsel = MUXSEL(2, 3, 1, 0), 2082 .tuner_type = TUNER_PHILIPS_FCV1236D, 2083 .tuner_addr = ADDR_UNSET, 2084 .has_dvb = 1, 2085 }, 2086 [BTTV_BOARD_TWINHAN_DST] = { 2087 .name = "Twinhan DST + clones", 2088 .no_msp34xx = 1, 2089 .no_tda7432 = 1, 2090 .tuner_type = TUNER_ABSENT, 2091 .tuner_addr = ADDR_UNSET, 2092 .no_video = 1, 2093 .has_dvb = 1, 2094 }, 2095 [BTTV_BOARD_WINFASTVC100] = { 2096 .name = "Winfast VC100", 2097 .video_inputs = 3, 2098 /* .audio_inputs= 0, */ 2099 .svhs = 1, 2100 /* Vid In, SVid In, Vid over SVid in connector */ 2101 .muxsel = MUXSEL(3, 1, 1, 3), 2102 .no_msp34xx = 1, 2103 .no_tda7432 = 1, 2104 .tuner_type = TUNER_ABSENT, 2105 .tuner_addr = ADDR_UNSET, 2106 .pll = PLL_28, 2107 }, 2108 [BTTV_BOARD_TEV560] = { 2109 .name = "Teppro TEV-560/InterVision IV-560", 2110 .video_inputs = 3, 2111 /* .audio_inputs= 1, */ 2112 .svhs = 2, 2113 .gpiomask = 3, 2114 .muxsel = MUXSEL(2, 3, 1, 1), 2115 .gpiomux = { 1, 1, 1, 1 }, 2116 .tuner_type = TUNER_PHILIPS_PAL, 2117 .tuner_addr = ADDR_UNSET, 2118 .pll = PLL_35, 2119 }, 2120 2121 /* ---- card 0x74 ---------------------------------- */ 2122 [BTTV_BOARD_SIMUS_GVC1100] = { 2123 .name = "SIMUS GVC1100", 2124 .video_inputs = 4, 2125 /* .audio_inputs= 0, */ 2126 .svhs = NO_SVHS, 2127 .tuner_type = TUNER_ABSENT, 2128 .tuner_addr = ADDR_UNSET, 2129 .pll = PLL_28, 2130 .muxsel = MUXSEL(2, 2, 2, 2), 2131 .gpiomask = 0x3F, 2132 .muxsel_hook = gvc1100_muxsel, 2133 }, 2134 [BTTV_BOARD_NGSTV_PLUS] = { 2135 /* Carlos Silva r3pek@r3pek.homelinux.org || card 0x75 */ 2136 .name = "NGS NGSTV+", 2137 .video_inputs = 3, 2138 .svhs = 2, 2139 .gpiomask = 0x008007, 2140 .muxsel = MUXSEL(2, 3, 0, 0), 2141 .gpiomux = { 0, 0, 0, 0 }, 2142 .gpiomute = 0x000003, 2143 .pll = PLL_28, 2144 .tuner_type = TUNER_PHILIPS_PAL, 2145 .tuner_addr = ADDR_UNSET, 2146 .has_remote = 1, 2147 }, 2148 [BTTV_BOARD_LMLBT4] = { 2149 /* http://linuxmedialabs.com */ 2150 .name = "LMLBT4", 2151 .video_inputs = 4, /* IN1,IN2,IN3,IN4 */ 2152 /* .audio_inputs= 0, */ 2153 .svhs = NO_SVHS, 2154 .muxsel = MUXSEL(2, 3, 1, 0), 2155 .no_msp34xx = 1, 2156 .no_tda7432 = 1, 2157 .tuner_type = TUNER_ABSENT, 2158 .tuner_addr = ADDR_UNSET, 2159 }, 2160 [BTTV_BOARD_TEKRAM_M205] = { 2161 /* Helmroos Harri <harri.helmroos@pp.inet.fi> */ 2162 .name = "Tekram M205 PRO", 2163 .video_inputs = 3, 2164 /* .audio_inputs= 1, */ 2165 .tuner_type = TUNER_PHILIPS_PAL, 2166 .tuner_addr = ADDR_UNSET, 2167 .svhs = 2, 2168 .gpiomask = 0x68, 2169 .muxsel = MUXSEL(2, 3, 1), 2170 .gpiomux = { 0x68, 0x68, 0x61, 0x61 }, 2171 .pll = PLL_28, 2172 }, 2173 2174 /* ---- card 0x78 ---------------------------------- */ 2175 [BTTV_BOARD_CONTVFMI] = { 2176 /* Javier Cendan Ares <jcendan@lycos.es> */ 2177 /* bt878 TV + FM without subsystem ID */ 2178 .name = "Conceptronic CONTVFMi", 2179 .video_inputs = 3, 2180 /* .audio_inputs= 1, */ 2181 .svhs = 2, 2182 .gpiomask = 0x008007, 2183 .muxsel = MUXSEL(2, 3, 1, 1), 2184 .gpiomux = { 0, 1, 2, 2 }, 2185 .gpiomute = 3, 2186 .pll = PLL_28, 2187 .tuner_type = TUNER_PHILIPS_PAL, 2188 .tuner_addr = ADDR_UNSET, 2189 .has_remote = 1, 2190 .has_radio = 1, 2191 }, 2192 [BTTV_BOARD_PICOLO_TETRA_CHIP] = { 2193 /*Eric DEBIEF <debief@telemsa.com>*/ 2194 /*EURESYS Picolo Tetra : 4 Conexant Fusion 878A, no audio, video input set with analog multiplexers GPIO controlled*/ 2195 /* adds picolo_tetra_muxsel(), picolo_tetra_init(), the following declaration strucure, and #define BTTV_BOARD_PICOLO_TETRA_CHIP*/ 2196 /*0x79 in bttv.h*/ 2197 .name = "Euresys Picolo Tetra", 2198 .video_inputs = 4, 2199 /* .audio_inputs= 0, */ 2200 .svhs = NO_SVHS, 2201 .gpiomask = 0, 2202 .gpiomask2 = 0x3C<<16,/*Set the GPIO[18]->GPIO[21] as output pin.==> drive the video inputs through analog multiplexers*/ 2203 .no_msp34xx = 1, 2204 .no_tda7432 = 1, 2205 /*878A input is always MUX0, see above.*/ 2206 .muxsel = MUXSEL(2, 2, 2, 2), 2207 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2208 .pll = PLL_28, 2209 .muxsel_hook = picolo_tetra_muxsel,/*Required as it doesn't follow the classic input selection policy*/ 2210 .tuner_type = TUNER_ABSENT, 2211 .tuner_addr = ADDR_UNSET, 2212 }, 2213 [BTTV_BOARD_SPIRIT_TV] = { 2214 /* Spirit TV Tuner from http://spiritmodems.com.au */ 2215 /* Stafford Goodsell <surge@goliath.homeunix.org> */ 2216 .name = "Spirit TV Tuner", 2217 .video_inputs = 3, 2218 /* .audio_inputs= 1, */ 2219 .svhs = 2, 2220 .gpiomask = 0x0000000f, 2221 .muxsel = MUXSEL(2, 1, 1), 2222 .gpiomux = { 0x02, 0x00, 0x00, 0x00 }, 2223 .tuner_type = TUNER_TEMIC_PAL, 2224 .tuner_addr = ADDR_UNSET, 2225 .no_msp34xx = 1, 2226 }, 2227 [BTTV_BOARD_AVDVBT_771] = { 2228 /* Wolfram Joost <wojo@frokaschwei.de> */ 2229 .name = "AVerMedia AVerTV DVB-T 771", 2230 .video_inputs = 2, 2231 .svhs = 1, 2232 .tuner_type = TUNER_ABSENT, 2233 .tuner_addr = ADDR_UNSET, 2234 .muxsel = MUXSEL(3, 3), 2235 .no_msp34xx = 1, 2236 .no_tda7432 = 1, 2237 .pll = PLL_28, 2238 .has_dvb = 1, 2239 .no_gpioirq = 1, 2240 .has_remote = 1, 2241 }, 2242 /* ---- card 0x7c ---------------------------------- */ 2243 [BTTV_BOARD_AVDVBT_761] = { 2244 /* Matt Jesson <dvb@jesson.eclipse.co.uk> */ 2245 /* Based on the Nebula card data - added remote and new card number - BTTV_BOARD_AVDVBT_761, see also ir-kbd-gpio.c */ 2246 .name = "AverMedia AverTV DVB-T 761", 2247 .video_inputs = 2, 2248 .svhs = 1, 2249 .muxsel = MUXSEL(3, 1, 2, 0), /* Comp0, S-Video, ?, ? */ 2250 .no_msp34xx = 1, 2251 .no_tda7432 = 1, 2252 .pll = PLL_28, 2253 .tuner_type = TUNER_ABSENT, 2254 .tuner_addr = ADDR_UNSET, 2255 .has_dvb = 1, 2256 .no_gpioirq = 1, 2257 .has_remote = 1, 2258 }, 2259 [BTTV_BOARD_MATRIX_VISIONSQ] = { 2260 /* andre.schwarz@matrix-vision.de */ 2261 .name = "MATRIX Vision Sigma-SQ", 2262 .video_inputs = 16, 2263 /* .audio_inputs= 0, */ 2264 .svhs = NO_SVHS, 2265 .gpiomask = 0x0, 2266 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 3, 3, 3, 3, 3, 3, 3, 3), 2267 .muxsel_hook = sigmaSQ_muxsel, 2268 .gpiomux = { 0 }, 2269 .no_msp34xx = 1, 2270 .pll = PLL_28, 2271 .tuner_type = TUNER_ABSENT, 2272 .tuner_addr = ADDR_UNSET, 2273 }, 2274 [BTTV_BOARD_MATRIX_VISIONSLC] = { 2275 /* andre.schwarz@matrix-vision.de */ 2276 .name = "MATRIX Vision Sigma-SLC", 2277 .video_inputs = 4, 2278 /* .audio_inputs= 0, */ 2279 .svhs = NO_SVHS, 2280 .gpiomask = 0x0, 2281 .muxsel = MUXSEL(2, 2, 2, 2), 2282 .muxsel_hook = sigmaSLC_muxsel, 2283 .gpiomux = { 0 }, 2284 .no_msp34xx = 1, 2285 .pll = PLL_28, 2286 .tuner_type = TUNER_ABSENT, 2287 .tuner_addr = ADDR_UNSET, 2288 }, 2289 /* BTTV_BOARD_APAC_VIEWCOMP */ 2290 [BTTV_BOARD_APAC_VIEWCOMP] = { 2291 /* Attila Kondoros <attila.kondoros@chello.hu> */ 2292 /* bt878 TV + FM 0x00000000 subsystem ID */ 2293 .name = "APAC Viewcomp 878(AMAX)", 2294 .video_inputs = 2, 2295 /* .audio_inputs= 1, */ 2296 .svhs = NO_SVHS, 2297 .gpiomask = 0xFF, 2298 .muxsel = MUXSEL(2, 3, 1, 1), 2299 .gpiomux = { 2, 0, 0, 0 }, 2300 .gpiomute = 10, 2301 .pll = PLL_28, 2302 .tuner_type = TUNER_PHILIPS_PAL, 2303 .tuner_addr = ADDR_UNSET, 2304 .has_remote = 1, /* miniremote works, see ir-kbd-gpio.c */ 2305 .has_radio = 1, /* not every card has radio */ 2306 }, 2307 2308 /* ---- card 0x80 ---------------------------------- */ 2309 [BTTV_BOARD_DVICO_DVBT_LITE] = { 2310 /* Chris Pascoe <c.pascoe@itee.uq.edu.au> */ 2311 .name = "DViCO FusionHDTV DVB-T Lite", 2312 .no_msp34xx = 1, 2313 .no_tda7432 = 1, 2314 .pll = PLL_28, 2315 .no_video = 1, 2316 .has_dvb = 1, 2317 .tuner_type = TUNER_ABSENT, 2318 .tuner_addr = ADDR_UNSET, 2319 }, 2320 [BTTV_BOARD_VGEAR_MYVCD] = { 2321 /* Steven <photon38@pchome.com.tw> */ 2322 .name = "V-Gear MyVCD", 2323 .video_inputs = 3, 2324 /* .audio_inputs= 1, */ 2325 .svhs = 2, 2326 .gpiomask = 0x3f, 2327 .muxsel = MUXSEL(2, 3, 1, 0), 2328 .gpiomux = {0x31, 0x31, 0x31, 0x31 }, 2329 .gpiomute = 0x31, 2330 .no_msp34xx = 1, 2331 .pll = PLL_28, 2332 .tuner_type = TUNER_PHILIPS_NTSC_M, 2333 .tuner_addr = ADDR_UNSET, 2334 .has_radio = 0, 2335 }, 2336 [BTTV_BOARD_SUPER_TV] = { 2337 /* Rick C <cryptdragoon@gmail.com> */ 2338 .name = "Super TV Tuner", 2339 .video_inputs = 4, 2340 /* .audio_inputs= 1, */ 2341 .svhs = 2, 2342 .muxsel = MUXSEL(2, 3, 1, 0), 2343 .tuner_type = TUNER_PHILIPS_NTSC, 2344 .tuner_addr = ADDR_UNSET, 2345 .gpiomask = 0x008007, 2346 .gpiomux = { 0, 0x000001,0,0 }, 2347 .has_radio = 1, 2348 }, 2349 [BTTV_BOARD_TIBET_CS16] = { 2350 /* Chris Fanning <video4linux@haydon.net> */ 2351 .name = "Tibet Systems 'Progress DVR' CS16", 2352 .video_inputs = 16, 2353 /* .audio_inputs= 0, */ 2354 .svhs = NO_SVHS, 2355 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), 2356 .pll = PLL_28, 2357 .no_msp34xx = 1, 2358 .no_tda7432 = 1, 2359 .tuner_type = TUNER_ABSENT, 2360 .tuner_addr = ADDR_UNSET, 2361 .muxsel_hook = tibetCS16_muxsel, 2362 }, 2363 [BTTV_BOARD_KODICOM_4400R] = { 2364 /* Bill Brack <wbrack@mmm.com.hk> */ 2365 /* 2366 * Note that, because of the card's wiring, the "master" 2367 * BT878A chip (i.e. the one which controls the analog switch 2368 * and must use this card type) is the 2nd one detected. The 2369 * other 3 chips should use card type 0x85, whose description 2370 * follows this one. There is a EEPROM on the card (which is 2371 * connected to the I2C of one of those other chips), but is 2372 * not currently handled. There is also a facility for a 2373 * "monitor", which is also not currently implemented. 2374 */ 2375 .name = "Kodicom 4400R (master)", 2376 .video_inputs = 16, 2377 /* .audio_inputs= 0, */ 2378 .tuner_type = TUNER_ABSENT, 2379 .tuner_addr = ADDR_UNSET, 2380 .svhs = NO_SVHS, 2381 /* GPIO bits 0-9 used for analog switch: 2382 * 00 - 03: camera selector 2383 * 04 - 06: channel (controller) selector 2384 * 07: data (1->on, 0->off) 2385 * 08: strobe 2386 * 09: reset 2387 * bit 16 is input from sync separator for the channel 2388 */ 2389 .gpiomask = 0x0003ff, 2390 .no_gpioirq = 1, 2391 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), 2392 .pll = PLL_28, 2393 .no_msp34xx = 1, 2394 .no_tda7432 = 1, 2395 .muxsel_hook = kodicom4400r_muxsel, 2396 }, 2397 [BTTV_BOARD_KODICOM_4400R_SL] = { 2398 /* Bill Brack <wbrack@mmm.com.hk> */ 2399 /* Note that, for reasons unknown, the "master" BT878A chip (i.e. the 2400 * one which controls the analog switch, and must use the card type) 2401 * is the 2nd one detected. The other 3 chips should use this card 2402 * type 2403 */ 2404 .name = "Kodicom 4400R (slave)", 2405 .video_inputs = 16, 2406 /* .audio_inputs= 0, */ 2407 .tuner_type = TUNER_ABSENT, 2408 .tuner_addr = ADDR_UNSET, 2409 .svhs = NO_SVHS, 2410 .gpiomask = 0x010000, 2411 .no_gpioirq = 1, 2412 .muxsel = MUXSEL(3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3, 3), 2413 .pll = PLL_28, 2414 .no_msp34xx = 1, 2415 .no_tda7432 = 1, 2416 .muxsel_hook = kodicom4400r_muxsel, 2417 }, 2418 /* ---- card 0x86---------------------------------- */ 2419 [BTTV_BOARD_ADLINK_RTV24] = { 2420 /* Michael Henson <mhenson@clarityvi.com> */ 2421 /* Adlink RTV24 with special unlock codes */ 2422 .name = "Adlink RTV24", 2423 .video_inputs = 4, 2424 /* .audio_inputs= 1, */ 2425 .svhs = 2, 2426 .muxsel = MUXSEL(2, 3, 1, 0), 2427 .tuner_type = UNSET, 2428 .tuner_addr = ADDR_UNSET, 2429 .pll = PLL_28, 2430 }, 2431 /* ---- card 0x87---------------------------------- */ 2432 [BTTV_BOARD_DVICO_FUSIONHDTV_5_LITE] = { 2433 /* Michael Krufky <mkrufky@linuxtv.org> */ 2434 .name = "DViCO FusionHDTV 5 Lite", 2435 .tuner_type = TUNER_LG_TDVS_H06XF, /* TDVS-H064F */ 2436 .tuner_addr = ADDR_UNSET, 2437 .video_inputs = 3, 2438 /* .audio_inputs= 1, */ 2439 .svhs = 2, 2440 .muxsel = MUXSEL(2, 3, 1), 2441 .gpiomask = 0x00e00007, 2442 .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, 2443 .gpiomute = 0x00c00007, 2444 .no_msp34xx = 1, 2445 .no_tda7432 = 1, 2446 .has_dvb = 1, 2447 }, 2448 /* ---- card 0x88---------------------------------- */ 2449 [BTTV_BOARD_ACORP_Y878F] = { 2450 /* Mauro Carvalho Chehab <mchehab@infradead.org> */ 2451 .name = "Acorp Y878F", 2452 .video_inputs = 3, 2453 /* .audio_inputs= 1, */ 2454 .svhs = 2, 2455 .gpiomask = 0x01fe00, 2456 .muxsel = MUXSEL(2, 3, 1, 1), 2457 .gpiomux = { 0x001e00, 0, 0x018000, 0x014000 }, 2458 .gpiomute = 0x002000, 2459 .pll = PLL_28, 2460 .tuner_type = TUNER_YMEC_TVF66T5_B_DFF, 2461 .tuner_addr = 0xc1 >>1, 2462 .has_radio = 1, 2463 }, 2464 /* ---- card 0x89 ---------------------------------- */ 2465 [BTTV_BOARD_CONCEPTRONIC_CTVFMI2] = { 2466 .name = "Conceptronic CTVFMi v2", 2467 .video_inputs = 3, 2468 /* .audio_inputs= 1, */ 2469 .svhs = 2, 2470 .gpiomask = 0x001c0007, 2471 .muxsel = MUXSEL(2, 3, 1, 1), 2472 .gpiomux = { 0, 1, 2, 2 }, 2473 .gpiomute = 3, 2474 .pll = PLL_28, 2475 .tuner_type = TUNER_TENA_9533_DI, 2476 .tuner_addr = ADDR_UNSET, 2477 .has_remote = 1, 2478 .has_radio = 1, 2479 }, 2480 /* ---- card 0x8a ---------------------------------- */ 2481 [BTTV_BOARD_PV_BT878P_2E] = { 2482 .name = "Prolink Pixelview PV-BT878P+ (Rev.2E)", 2483 .video_inputs = 5, 2484 /* .audio_inputs= 1, */ 2485 .svhs = 3, 2486 .has_dig_in = 1, 2487 .gpiomask = 0x01fe00, 2488 .muxsel = MUXSEL(2, 3, 1, 1, 0), /* in 4 is digital */ 2489 /* .digital_mode= DIGITAL_MODE_CAMERA, */ 2490 .gpiomux = { 0x00400, 0x10400, 0x04400, 0x80000 }, 2491 .gpiomute = 0x12400, 2492 .no_msp34xx = 1, 2493 .pll = PLL_28, 2494 .tuner_type = TUNER_LG_PAL_FM, 2495 .tuner_addr = ADDR_UNSET, 2496 .has_remote = 1, 2497 }, 2498 /* ---- card 0x8b ---------------------------------- */ 2499 [BTTV_BOARD_PV_M4900] = { 2500 /* Sérgio Fortier <sergiofortier@yahoo.com.br> */ 2501 .name = "Prolink PixelView PlayTV MPEG2 PV-M4900", 2502 .video_inputs = 3, 2503 /* .audio_inputs= 1, */ 2504 .svhs = 2, 2505 .gpiomask = 0x3f, 2506 .muxsel = MUXSEL(2, 3, 1, 1), 2507 .gpiomux = { 0x21, 0x20, 0x24, 0x2c }, 2508 .gpiomute = 0x29, 2509 .no_msp34xx = 1, 2510 .pll = PLL_28, 2511 .tuner_type = TUNER_YMEC_TVF_5533MF, 2512 .tuner_addr = ADDR_UNSET, 2513 .has_radio = 1, 2514 .has_remote = 1, 2515 }, 2516 /* ---- card 0x8c ---------------------------------- */ 2517 /* Has four Bt878 chips behind a PCI bridge, each chip has: 2518 one external BNC composite input (mux 2) 2519 three internal composite inputs (unknown muxes) 2520 an 18-bit stereo A/D (CS5331A), which has: 2521 one external stereo unblanced (RCA) audio connection 2522 one (or 3?) internal stereo balanced (XLR) audio connection 2523 input is selected via gpio to a 14052B mux 2524 (mask=0x300, unbal=0x000, bal=0x100, ??=0x200,0x300) 2525 gain is controlled via an X9221A chip on the I2C bus @0x28 2526 sample rate is controlled via gpio to an MK1413S 2527 (mask=0x3, 32kHz=0x0, 44.1kHz=0x1, 48kHz=0x2, ??=0x3) 2528 There is neither a tuner nor an svideo input. */ 2529 [BTTV_BOARD_OSPREY440] = { 2530 .name = "Osprey 440", 2531 .video_inputs = 4, 2532 /* .audio_inputs= 2, */ 2533 .svhs = NO_SVHS, 2534 .muxsel = MUXSEL(2, 3, 0, 1), /* 3,0,1 are guesses */ 2535 .gpiomask = 0x303, 2536 .gpiomute = 0x000, /* int + 32kHz */ 2537 .gpiomux = { 0, 0, 0x000, 0x100}, 2538 .pll = PLL_28, 2539 .tuner_type = TUNER_ABSENT, 2540 .tuner_addr = ADDR_UNSET, 2541 .no_msp34xx = 1, 2542 .no_tda7432 = 1, 2543 }, 2544 /* ---- card 0x8d ---------------------------------- */ 2545 [BTTV_BOARD_ASOUND_SKYEYE] = { 2546 .name = "Asound Skyeye PCTV", 2547 .video_inputs = 3, 2548 /* .audio_inputs= 1, */ 2549 .svhs = 2, 2550 .gpiomask = 15, 2551 .muxsel = MUXSEL(2, 3, 1, 1), 2552 .gpiomux = { 2, 0, 0, 0 }, 2553 .gpiomute = 1, 2554 .pll = PLL_28, 2555 .tuner_type = TUNER_PHILIPS_NTSC, 2556 .tuner_addr = ADDR_UNSET, 2557 }, 2558 /* ---- card 0x8e ---------------------------------- */ 2559 [BTTV_BOARD_SABRENT_TVFM] = { 2560 .name = "Sabrent TV-FM (bttv version)", 2561 .video_inputs = 3, 2562 /* .audio_inputs= 1, */ 2563 .svhs = 2, 2564 .gpiomask = 0x108007, 2565 .muxsel = MUXSEL(2, 3, 1, 1), 2566 .gpiomux = { 100000, 100002, 100002, 100000 }, 2567 .no_msp34xx = 1, 2568 .no_tda7432 = 1, 2569 .pll = PLL_28, 2570 .tuner_type = TUNER_TNF_5335MF, 2571 .tuner_addr = ADDR_UNSET, 2572 .has_radio = 1, 2573 }, 2574 /* ---- card 0x8f ---------------------------------- */ 2575 [BTTV_BOARD_HAUPPAUGE_IMPACTVCB] = { 2576 .name = "Hauppauge ImpactVCB (bt878)", 2577 .video_inputs = 4, 2578 /* .audio_inputs= 0, */ 2579 .svhs = NO_SVHS, 2580 .gpiomask = 0x0f, /* old: 7 */ 2581 .muxsel = MUXSEL(0, 1, 3, 2), /* Composite 0-3 */ 2582 .no_msp34xx = 1, 2583 .no_tda7432 = 1, 2584 .tuner_type = TUNER_ABSENT, 2585 .tuner_addr = ADDR_UNSET, 2586 }, 2587 [BTTV_BOARD_MACHTV_MAGICTV] = { 2588 /* Julian Calaby <julian.calaby@gmail.com> 2589 * Slightly different from original MachTV definition (0x60) 2590 2591 * FIXME: RegSpy says gpiomask should be "0x001c800f", but it 2592 * stuffs up remote chip. Bug is a pin on the jaecs is not set 2593 * properly (methinks) causing no keyup bits being set */ 2594 2595 .name = "MagicTV", /* rebranded MachTV */ 2596 .video_inputs = 3, 2597 /* .audio_inputs= 1, */ 2598 .svhs = 2, 2599 .gpiomask = 7, 2600 .muxsel = MUXSEL(2, 3, 1, 1), 2601 .gpiomux = { 0, 1, 2, 3 }, 2602 .gpiomute = 4, 2603 .tuner_type = TUNER_TEMIC_4009FR5_PAL, 2604 .tuner_addr = ADDR_UNSET, 2605 .pll = PLL_28, 2606 .has_radio = 1, 2607 .has_remote = 1, 2608 }, 2609 [BTTV_BOARD_SSAI_SECURITY] = { 2610 .name = "SSAI Security Video Interface", 2611 .video_inputs = 4, 2612 /* .audio_inputs= 0, */ 2613 .svhs = NO_SVHS, 2614 .muxsel = MUXSEL(0, 1, 2, 3), 2615 .tuner_type = TUNER_ABSENT, 2616 .tuner_addr = ADDR_UNSET, 2617 }, 2618 [BTTV_BOARD_SSAI_ULTRASOUND] = { 2619 .name = "SSAI Ultrasound Video Interface", 2620 .video_inputs = 2, 2621 /* .audio_inputs= 0, */ 2622 .svhs = 1, 2623 .muxsel = MUXSEL(2, 0, 1, 3), 2624 .tuner_type = TUNER_ABSENT, 2625 .tuner_addr = ADDR_UNSET, 2626 }, 2627 /* ---- card 0x94---------------------------------- */ 2628 [BTTV_BOARD_DVICO_FUSIONHDTV_2] = { 2629 .name = "DViCO FusionHDTV 2", 2630 .tuner_type = TUNER_PHILIPS_FCV1236D, 2631 .tuner_addr = ADDR_UNSET, 2632 .video_inputs = 3, 2633 /* .audio_inputs= 1, */ 2634 .svhs = 2, 2635 .muxsel = MUXSEL(2, 3, 1), 2636 .gpiomask = 0x00e00007, 2637 .gpiomux = { 0x00400005, 0, 0x00000001, 0 }, 2638 .gpiomute = 0x00c00007, 2639 .no_msp34xx = 1, 2640 .no_tda7432 = 1, 2641 }, 2642 /* ---- card 0x95---------------------------------- */ 2643 [BTTV_BOARD_TYPHOON_TVTUNERPCI] = { 2644 .name = "Typhoon TV-Tuner PCI (50684)", 2645 .video_inputs = 3, 2646 /* .audio_inputs= 1, */ 2647 .svhs = 2, 2648 .gpiomask = 0x3014f, 2649 .muxsel = MUXSEL(2, 3, 1, 1), 2650 .gpiomux = { 0x20001,0x10001, 0, 0 }, 2651 .gpiomute = 10, 2652 .pll = PLL_28, 2653 .tuner_type = TUNER_PHILIPS_PAL_I, 2654 .tuner_addr = ADDR_UNSET, 2655 }, 2656 [BTTV_BOARD_GEOVISION_GV600] = { 2657 /* emhn@usb.ve */ 2658 .name = "Geovision GV-600", 2659 .video_inputs = 16, 2660 /* .audio_inputs= 0, */ 2661 .svhs = NO_SVHS, 2662 .gpiomask = 0x0, 2663 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), 2664 .muxsel_hook = geovision_muxsel, 2665 .gpiomux = { 0 }, 2666 .no_msp34xx = 1, 2667 .pll = PLL_28, 2668 .tuner_type = TUNER_ABSENT, 2669 .tuner_addr = ADDR_UNSET, 2670 }, 2671 [BTTV_BOARD_KOZUMI_KTV_01C] = { 2672 /* Mauro Lacy <mauro@lacy.com.ar> 2673 * Based on MagicTV and Conceptronic CONTVFMi */ 2674 2675 .name = "Kozumi KTV-01C", 2676 .video_inputs = 3, 2677 /* .audio_inputs= 1, */ 2678 .svhs = 2, 2679 .gpiomask = 0x008007, 2680 .muxsel = MUXSEL(2, 3, 1, 1), 2681 .gpiomux = { 0, 1, 2, 2 }, /* CONTVFMi */ 2682 .gpiomute = 3, /* CONTVFMi */ 2683 .tuner_type = TUNER_PHILIPS_FM1216ME_MK3, /* TCL MK3 */ 2684 .tuner_addr = ADDR_UNSET, 2685 .pll = PLL_28, 2686 .has_radio = 1, 2687 .has_remote = 1, 2688 }, 2689 [BTTV_BOARD_ENLTV_FM_2] = { 2690 /* Encore TV Tuner Pro ENL TV-FM-2 2691 Mauro Carvalho Chehab <mchehab@infradead.org */ 2692 .name = "Encore ENL TV-FM-2", 2693 .video_inputs = 3, 2694 /* .audio_inputs= 1, */ 2695 .svhs = 2, 2696 /* bit 6 -> IR disabled 2697 bit 18/17 = 00 -> mute 2698 01 -> enable external audio input 2699 10 -> internal audio input (mono?) 2700 11 -> internal audio input 2701 */ 2702 .gpiomask = 0x060040, 2703 .muxsel = MUXSEL(2, 3, 3), 2704 .gpiomux = { 0x60000, 0x60000, 0x20000, 0x20000 }, 2705 .gpiomute = 0, 2706 .tuner_type = TUNER_TCL_MF02GIP_5N, 2707 .tuner_addr = ADDR_UNSET, 2708 .pll = PLL_28, 2709 .has_radio = 1, 2710 .has_remote = 1, 2711 }, 2712 [BTTV_BOARD_VD012] = { 2713 /* D.Heer@Phytec.de */ 2714 .name = "PHYTEC VD-012 (bt878)", 2715 .video_inputs = 4, 2716 /* .audio_inputs= 0, */ 2717 .svhs = NO_SVHS, 2718 .gpiomask = 0x00, 2719 .muxsel = MUXSEL(0, 2, 3, 1), 2720 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2721 .pll = PLL_28, 2722 .tuner_type = TUNER_ABSENT, 2723 .tuner_addr = ADDR_UNSET, 2724 }, 2725 [BTTV_BOARD_VD012_X1] = { 2726 /* D.Heer@Phytec.de */ 2727 .name = "PHYTEC VD-012-X1 (bt878)", 2728 .video_inputs = 4, 2729 /* .audio_inputs= 0, */ 2730 .svhs = 3, 2731 .gpiomask = 0x00, 2732 .muxsel = MUXSEL(2, 3, 1), 2733 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2734 .pll = PLL_28, 2735 .tuner_type = TUNER_ABSENT, 2736 .tuner_addr = ADDR_UNSET, 2737 }, 2738 [BTTV_BOARD_VD012_X2] = { 2739 /* D.Heer@Phytec.de */ 2740 .name = "PHYTEC VD-012-X2 (bt878)", 2741 .video_inputs = 4, 2742 /* .audio_inputs= 0, */ 2743 .svhs = 3, 2744 .gpiomask = 0x00, 2745 .muxsel = MUXSEL(3, 2, 1), 2746 .gpiomux = { 0, 0, 0, 0 }, /* card has no audio */ 2747 .pll = PLL_28, 2748 .tuner_type = TUNER_ABSENT, 2749 .tuner_addr = ADDR_UNSET, 2750 }, 2751 [BTTV_BOARD_GEOVISION_GV800S] = { 2752 /* Bruno Christo <bchristo@inf.ufsm.br> 2753 * 2754 * GeoVision GV-800(S) has 4 Conexant Fusion 878A: 2755 * 1 audio input per BT878A = 4 audio inputs 2756 * 4 video inputs per BT878A = 16 video inputs 2757 * This is the first BT878A chip of the GV-800(S). It's the 2758 * "master" chip and it controls the video inputs through an 2759 * analog multiplexer (a CD22M3494) via some GPIO pins. The 2760 * slaves should use card type 0x9e (following this one). 2761 * There is a EEPROM on the card which is currently not handled. 2762 * The audio input is not working yet. 2763 */ 2764 .name = "Geovision GV-800(S) (master)", 2765 .video_inputs = 4, 2766 /* .audio_inputs= 1, */ 2767 .tuner_type = TUNER_ABSENT, 2768 .tuner_addr = ADDR_UNSET, 2769 .svhs = NO_SVHS, 2770 .gpiomask = 0xf107f, 2771 .no_gpioirq = 1, 2772 .muxsel = MUXSEL(2, 2, 2, 2), 2773 .pll = PLL_28, 2774 .no_msp34xx = 1, 2775 .no_tda7432 = 1, 2776 .muxsel_hook = gv800s_muxsel, 2777 }, 2778 [BTTV_BOARD_GEOVISION_GV800S_SL] = { 2779 /* Bruno Christo <bchristo@inf.ufsm.br> 2780 * 2781 * GeoVision GV-800(S) has 4 Conexant Fusion 878A: 2782 * 1 audio input per BT878A = 4 audio inputs 2783 * 4 video inputs per BT878A = 16 video inputs 2784 * The 3 other BT878A chips are "slave" chips of the GV-800(S) 2785 * and should use this card type. 2786 * The audio input is not working yet. 2787 */ 2788 .name = "Geovision GV-800(S) (slave)", 2789 .video_inputs = 4, 2790 /* .audio_inputs= 1, */ 2791 .tuner_type = TUNER_ABSENT, 2792 .tuner_addr = ADDR_UNSET, 2793 .svhs = NO_SVHS, 2794 .gpiomask = 0x00, 2795 .no_gpioirq = 1, 2796 .muxsel = MUXSEL(2, 2, 2, 2), 2797 .pll = PLL_28, 2798 .no_msp34xx = 1, 2799 .no_tda7432 = 1, 2800 .muxsel_hook = gv800s_muxsel, 2801 }, 2802 [BTTV_BOARD_PV183] = { 2803 .name = "ProVideo PV183", /* 0x9f */ 2804 .video_inputs = 2, 2805 /* .audio_inputs= 0, */ 2806 .svhs = NO_SVHS, 2807 .gpiomask = 0, 2808 .muxsel = MUXSEL(2, 3), 2809 .gpiomux = { 0 }, 2810 .no_msp34xx = 1, 2811 .pll = PLL_28, 2812 .tuner_type = TUNER_ABSENT, 2813 .tuner_addr = ADDR_UNSET, 2814 }, 2815 /* ---- card 0xa0---------------------------------- */ 2816 [BTTV_BOARD_TVT_TD3116] = { 2817 .name = "Tongwei Video Technology TD-3116", 2818 .video_inputs = 16, 2819 .gpiomask = 0xc00ff, 2820 .muxsel = MUXSEL(2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2, 2), 2821 .muxsel_hook = td3116_muxsel, 2822 .svhs = NO_SVHS, 2823 .pll = PLL_28, 2824 .tuner_type = TUNER_ABSENT, 2825 }, 2826 [BTTV_BOARD_APOSONIC_WDVR] = { 2827 .name = "Aposonic W-DVR", 2828 .video_inputs = 4, 2829 .svhs = NO_SVHS, 2830 .muxsel = MUXSEL(2, 3, 1, 0), 2831 .tuner_type = TUNER_ABSENT, 2832 }, 2833 [BTTV_BOARD_ADLINK_MPG24] = { 2834 /* Adlink MPG24 */ 2835 .name = "Adlink MPG24", 2836 .video_inputs = 1, 2837 /* .audio_inputs= 1, */ 2838 .svhs = NO_SVHS, 2839 .muxsel = MUXSEL(2, 2, 2, 2), 2840 .tuner_type = UNSET, 2841 .tuner_addr = ADDR_UNSET, 2842 .pll = PLL_28, 2843 }, 2844 [BTTV_BOARD_BT848_CAP_14] = { 2845 .name = "Bt848 Capture 14MHz", 2846 .video_inputs = 4, 2847 .svhs = 2, 2848 .muxsel = MUXSEL(2, 3, 1, 0), 2849 .pll = PLL_14, 2850 .tuner_type = TUNER_ABSENT, 2851 }, 2852 [BTTV_BOARD_CYBERVISION_CV06] = { 2853 .name = "CyberVision CV06 (SV)", 2854 .video_inputs = 4, 2855 /* .audio_inputs= 0, */ 2856 .svhs = NO_SVHS, 2857 .muxsel = MUXSEL(2, 3, 1, 0), 2858 .pll = PLL_28, 2859 .tuner_type = TUNER_ABSENT, 2860 .tuner_addr = ADDR_UNSET, 2861 }, 2862 [BTTV_BOARD_KWORLD_VSTREAM_XPERT] = { 2863 /* Pojar George <geoubuntu@gmail.com> */ 2864 .name = "Kworld V-Stream Xpert TV PVR878", 2865 .video_inputs = 3, 2866 /* .audio_inputs= 1, */ 2867 .svhs = 2, 2868 .gpiomask = 0x001c0007, 2869 .muxsel = MUXSEL(2, 3, 1, 1), 2870 .gpiomux = { 0, 1, 2, 2 }, 2871 .gpiomute = 3, 2872 .pll = PLL_28, 2873 .tuner_type = TUNER_TENA_9533_DI, 2874 .tuner_addr = ADDR_UNSET, 2875 .has_remote = 1, 2876 .has_radio = 1, 2877 }, 2878 /* ---- card 0xa6---------------------------------- */ 2879 [BTTV_BOARD_PCI_8604PW] = { 2880 /* PCI-8604PW with special unlock sequence */ 2881 .name = "PCI-8604PW", 2882 .video_inputs = 2, 2883 /* .audio_inputs= 0, */ 2884 .svhs = NO_SVHS, 2885 /* The second input is available on CN4, if populated. 2886 * The other 5x2 header (CN2?) connects to the same inputs 2887 * as the on-board BNCs */ 2888 .muxsel = MUXSEL(2, 3), 2889 .tuner_type = TUNER_ABSENT, 2890 .no_msp34xx = 1, 2891 .no_tda7432 = 1, 2892 .pll = PLL_35, 2893 }, 2894 }; 2895 2896 static const unsigned int bttv_num_tvcards = ARRAY_SIZE(bttv_tvcards); 2897 2898 /* ----------------------------------------------------------------------- */ 2899 2900 static unsigned char eeprom_data[256]; 2901 2902 /* 2903 * identify card 2904 */ 2905 void bttv_idcard(struct bttv *btv) 2906 { 2907 unsigned int gpiobits; 2908 int i,type; 2909 2910 /* read PCI subsystem ID */ 2911 btv->cardid = btv->c.pci->subsystem_device << 16; 2912 btv->cardid |= btv->c.pci->subsystem_vendor; 2913 2914 if (0 != btv->cardid && 0xffffffff != btv->cardid) { 2915 /* look for the card */ 2916 for (type = -1, i = 0; cards[i].id != 0; i++) 2917 if (cards[i].id == btv->cardid) 2918 type = i; 2919 2920 if (type != -1) { 2921 /* found it */ 2922 pr_info("%d: detected: %s [card=%d], PCI subsystem ID is %04x:%04x\n", 2923 btv->c.nr, cards[type].name, cards[type].cardnr, 2924 btv->cardid & 0xffff, 2925 (btv->cardid >> 16) & 0xffff); 2926 btv->c.type = cards[type].cardnr; 2927 } else { 2928 /* 404 */ 2929 pr_info("%d: subsystem: %04x:%04x (UNKNOWN)\n", 2930 btv->c.nr, btv->cardid & 0xffff, 2931 (btv->cardid >> 16) & 0xffff); 2932 pr_debug("please mail id, board name and the correct card= insmod option to linux-media@vger.kernel.org\n"); 2933 } 2934 } 2935 2936 /* let the user override the autodetected type */ 2937 if (card[btv->c.nr] < bttv_num_tvcards) 2938 btv->c.type=card[btv->c.nr]; 2939 2940 /* print which card config we are using */ 2941 pr_info("%d: using: %s [card=%d,%s]\n", 2942 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type, 2943 card[btv->c.nr] < bttv_num_tvcards 2944 ? "insmod option" : "autodetected"); 2945 2946 /* overwrite gpio stuff ?? */ 2947 if (UNSET == audioall && UNSET == audiomux[0]) 2948 return; 2949 2950 if (UNSET != audiomux[0]) { 2951 gpiobits = 0; 2952 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { 2953 bttv_tvcards[btv->c.type].gpiomux[i] = audiomux[i]; 2954 gpiobits |= audiomux[i]; 2955 } 2956 } else { 2957 gpiobits = audioall; 2958 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { 2959 bttv_tvcards[btv->c.type].gpiomux[i] = audioall; 2960 } 2961 } 2962 bttv_tvcards[btv->c.type].gpiomask = (UNSET != gpiomask) ? gpiomask : gpiobits; 2963 pr_info("%d: gpio config override: mask=0x%x, mux=", 2964 btv->c.nr, bttv_tvcards[btv->c.type].gpiomask); 2965 for (i = 0; i < ARRAY_SIZE(bttv_tvcards->gpiomux); i++) { 2966 pr_cont("%s0x%x", 2967 i ? "," : "", bttv_tvcards[btv->c.type].gpiomux[i]); 2968 } 2969 pr_cont("\n"); 2970 } 2971 2972 /* 2973 * (most) board specific initialisations goes here 2974 */ 2975 2976 /* Some Modular Technology cards have an eeprom, but no subsystem ID */ 2977 static void identify_by_eeprom(struct bttv *btv, unsigned char eeprom_data[256]) 2978 { 2979 int type = -1; 2980 2981 if (0 == strncmp(eeprom_data,"GET MM20xPCTV",13)) 2982 type = BTTV_BOARD_MODTEC_205; 2983 else if (0 == strncmp(eeprom_data+20,"Picolo",7)) 2984 type = BTTV_BOARD_EURESYS_PICOLO; 2985 else if (eeprom_data[0] == 0x84 && eeprom_data[2]== 0) 2986 type = BTTV_BOARD_HAUPPAUGE; /* old bt848 */ 2987 2988 if (-1 != type) { 2989 btv->c.type = type; 2990 pr_info("%d: detected by eeprom: %s [card=%d]\n", 2991 btv->c.nr, bttv_tvcards[btv->c.type].name, btv->c.type); 2992 } 2993 } 2994 2995 static void flyvideo_gpio(struct bttv *btv) 2996 { 2997 int gpio, has_remote, has_radio, is_capture_only; 2998 int is_lr90, has_tda9820_tda9821; 2999 int tuner_type = UNSET, ttype; 3000 3001 gpio_inout(0xffffff, 0); 3002 udelay(8); /* without this we would see the 0x1800 mask */ 3003 gpio = gpio_read(); 3004 /* FIXME: must restore OUR_EN ??? */ 3005 3006 /* all cards provide GPIO info, some have an additional eeprom 3007 * LR50: GPIO coding can be found lower right CP1 .. CP9 3008 * CP9=GPIO23 .. CP1=GPIO15; when OPEN, the corresponding GPIO reads 1. 3009 * GPIO14-12: n.c. 3010 * LR90: GP9=GPIO23 .. GP1=GPIO15 (right above the bt878) 3011 3012 * lowest 3 bytes are remote control codes (no handshake needed) 3013 * xxxFFF: No remote control chip soldered 3014 * xxxF00(LR26/LR50), xxxFE0(LR90): Remote control chip (LVA001 or CF45) soldered 3015 * Note: Some bits are Audio_Mask ! 3016 */ 3017 ttype = (gpio & 0x0f0000) >> 16; 3018 switch (ttype) { 3019 case 0x0: 3020 tuner_type = 2; /* NTSC, e.g. TPI8NSR11P */ 3021 break; 3022 case 0x2: 3023 tuner_type = 39; /* LG NTSC (newer TAPC series) TAPC-H701P */ 3024 break; 3025 case 0x4: 3026 tuner_type = 5; /* Philips PAL TPI8PSB02P, TPI8PSB12P, TPI8PSB12D or FI1216, FM1216 */ 3027 break; 3028 case 0x6: 3029 tuner_type = 37; /* LG PAL (newer TAPC series) TAPC-G702P */ 3030 break; 3031 case 0xC: 3032 tuner_type = 3; /* Philips SECAM(+PAL) FQ1216ME or FI1216MF */ 3033 break; 3034 default: 3035 pr_info("%d: FlyVideo_gpio: unknown tuner type\n", btv->c.nr); 3036 break; 3037 } 3038 3039 has_remote = gpio & 0x800000; 3040 has_radio = gpio & 0x400000; 3041 /* unknown 0x200000; 3042 * unknown2 0x100000; */ 3043 is_capture_only = !(gpio & 0x008000); /* GPIO15 */ 3044 has_tda9820_tda9821 = !(gpio & 0x004000); 3045 is_lr90 = !(gpio & 0x002000); /* else LR26/LR50 (LR38/LR51 f. capture only) */ 3046 /* 3047 * gpio & 0x001000 output bit for audio routing */ 3048 3049 if (is_capture_only) 3050 tuner_type = TUNER_ABSENT; /* No tuner present */ 3051 3052 pr_info("%d: FlyVideo Radio=%s RemoteControl=%s Tuner=%d gpio=0x%06x\n", 3053 btv->c.nr, has_radio ? "yes" : "no", 3054 has_remote ? "yes" : "no", tuner_type, gpio); 3055 pr_info("%d: FlyVideo LR90=%s tda9821/tda9820=%s capture_only=%s\n", 3056 btv->c.nr, is_lr90 ? "yes" : "no", 3057 has_tda9820_tda9821 ? "yes" : "no", 3058 is_capture_only ? "yes" : "no"); 3059 3060 if (tuner_type != UNSET) /* only set if known tuner autodetected, else let insmod option through */ 3061 btv->tuner_type = tuner_type; 3062 btv->has_radio = has_radio; 3063 3064 /* LR90 Audio Routing is done by 2 hef4052, so Audio_Mask has 4 bits: 0x001c80 3065 * LR26/LR50 only has 1 hef4052, Audio_Mask 0x000c00 3066 * Audio options: from tuner, from tda9821/tda9821(mono,stereo,sap), from tda9874, ext., mute */ 3067 if (has_tda9820_tda9821) 3068 btv->audio_mode_gpio = lt9415_audio; 3069 /* todo: if(has_tda9874) btv->audio_mode_gpio = fv2000s_audio; */ 3070 } 3071 3072 static int miro_tunermap[] = { 0,6,2,3, 4,5,6,0, 3,0,4,5, 5,2,16,1, 3073 14,2,17,1, 4,1,4,3, 1,2,16,1, 4,4,4,4 }; 3074 static int miro_fmtuner[] = { 0,0,0,0, 0,0,0,0, 0,0,0,0, 0,0,0,1, 3075 1,1,1,1, 1,1,1,0, 0,0,0,0, 0,1,0,0 }; 3076 3077 static void miro_pinnacle_gpio(struct bttv *btv) 3078 { 3079 int id,msp,gpio; 3080 char *info; 3081 3082 gpio_inout(0xffffff, 0); 3083 gpio = gpio_read(); 3084 id = ((gpio>>10) & 63) -1; 3085 msp = bttv_I2CRead(btv, I2C_ADDR_MSP3400, "MSP34xx"); 3086 if (id < 32) { 3087 btv->tuner_type = miro_tunermap[id]; 3088 if (0 == (gpio & 0x20)) { 3089 btv->has_radio = 1; 3090 if (!miro_fmtuner[id]) { 3091 btv->has_tea575x = 1; 3092 btv->tea_gpio.wren = 6; 3093 btv->tea_gpio.most = 7; 3094 btv->tea_gpio.clk = 8; 3095 btv->tea_gpio.data = 9; 3096 tea575x_init(btv); 3097 } 3098 } else { 3099 btv->has_radio = 0; 3100 } 3101 if (-1 != msp) { 3102 if (btv->c.type == BTTV_BOARD_MIRO) 3103 btv->c.type = BTTV_BOARD_MIROPRO; 3104 if (btv->c.type == BTTV_BOARD_PINNACLE) 3105 btv->c.type = BTTV_BOARD_PINNACLEPRO; 3106 } 3107 pr_info("%d: miro: id=%d tuner=%d radio=%s stereo=%s\n", 3108 btv->c.nr, id+1, btv->tuner_type, 3109 !btv->has_radio ? "no" : 3110 (btv->has_tea575x ? "tea575x" : "fmtuner"), 3111 (-1 == msp) ? "no" : "yes"); 3112 } else { 3113 /* new cards with microtune tuner */ 3114 id = 63 - id; 3115 btv->has_radio = 0; 3116 switch (id) { 3117 case 1: 3118 info = "PAL / mono"; 3119 btv->tda9887_conf = TDA9887_INTERCARRIER; 3120 break; 3121 case 2: 3122 info = "PAL+SECAM / stereo"; 3123 btv->has_radio = 1; 3124 btv->tda9887_conf = TDA9887_QSS; 3125 break; 3126 case 3: 3127 info = "NTSC / stereo"; 3128 btv->has_radio = 1; 3129 btv->tda9887_conf = TDA9887_QSS; 3130 break; 3131 case 4: 3132 info = "PAL+SECAM / mono"; 3133 btv->tda9887_conf = TDA9887_QSS; 3134 break; 3135 case 5: 3136 info = "NTSC / mono"; 3137 btv->tda9887_conf = TDA9887_INTERCARRIER; 3138 break; 3139 case 6: 3140 info = "NTSC / stereo"; 3141 btv->tda9887_conf = TDA9887_INTERCARRIER; 3142 break; 3143 case 7: 3144 info = "PAL / stereo"; 3145 btv->tda9887_conf = TDA9887_INTERCARRIER; 3146 break; 3147 default: 3148 info = "oops: unknown card"; 3149 break; 3150 } 3151 if (-1 != msp) 3152 btv->c.type = BTTV_BOARD_PINNACLEPRO; 3153 pr_info("%d: pinnacle/mt: id=%d info=\"%s\" radio=%s\n", 3154 btv->c.nr, id, info, btv->has_radio ? "yes" : "no"); 3155 btv->tuner_type = TUNER_MT2032; 3156 } 3157 } 3158 3159 /* GPIO21 L: Buffer aktiv, H: Buffer inaktiv */ 3160 #define LM1882_SYNC_DRIVE 0x200000L 3161 3162 static void init_ids_eagle(struct bttv *btv) 3163 { 3164 gpio_inout(0xffffff,0xFFFF37); 3165 gpio_write(0x200020); 3166 3167 /* flash strobe inverter ?! */ 3168 gpio_write(0x200024); 3169 3170 /* switch sync drive off */ 3171 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); 3172 3173 /* set BT848 muxel to 2 */ 3174 btaor((2)<<5, ~(2<<5), BT848_IFORM); 3175 } 3176 3177 /* Muxsel helper for the IDS Eagle. 3178 * the eagles does not use the standard muxsel-bits but 3179 * has its own multiplexer */ 3180 static void eagle_muxsel(struct bttv *btv, unsigned int input) 3181 { 3182 gpio_bits(3, input & 3); 3183 3184 /* composite */ 3185 /* set chroma ADC to sleep */ 3186 btor(BT848_ADC_C_SLEEP, BT848_ADC); 3187 /* set to composite video */ 3188 btand(~BT848_CONTROL_COMP, BT848_E_CONTROL); 3189 btand(~BT848_CONTROL_COMP, BT848_O_CONTROL); 3190 3191 /* switch sync drive off */ 3192 gpio_bits(LM1882_SYNC_DRIVE,LM1882_SYNC_DRIVE); 3193 } 3194 3195 static void gvc1100_muxsel(struct bttv *btv, unsigned int input) 3196 { 3197 static const int masks[] = {0x30, 0x01, 0x12, 0x23}; 3198 gpio_write(masks[input%4]); 3199 } 3200 3201 /* LMLBT4x initialization - to allow access to GPIO bits for sensors input and 3202 alarms output 3203 3204 GPIObit | 10 | 9 | 8 | 7 | 6 | 5 | 4 | 3 | 2 | 1 | 0 | 3205 assignment | TI | O3|INx| O2| O1|IN4|IN3|IN2|IN1| | | 3206 3207 IN - sensor inputs, INx - sensor inputs and TI XORed together 3208 O1,O2,O3 - alarm outputs (relays) 3209 3210 OUT ENABLE 1 1 0 . 1 1 0 0 . 0 0 0 0 = 0x6C0 3211 3212 */ 3213 3214 static void init_lmlbt4x(struct bttv *btv) 3215 { 3216 pr_debug("LMLBT4x init\n"); 3217 btwrite(0x000000, BT848_GPIO_REG_INP); 3218 gpio_inout(0xffffff, 0x0006C0); 3219 gpio_write(0x000000); 3220 } 3221 3222 static void sigmaSQ_muxsel(struct bttv *btv, unsigned int input) 3223 { 3224 unsigned int inmux = input % 8; 3225 gpio_inout( 0xf, 0xf ); 3226 gpio_bits( 0xf, inmux ); 3227 } 3228 3229 static void sigmaSLC_muxsel(struct bttv *btv, unsigned int input) 3230 { 3231 unsigned int inmux = input % 4; 3232 gpio_inout( 3<<9, 3<<9 ); 3233 gpio_bits( 3<<9, inmux<<9 ); 3234 } 3235 3236 static void geovision_muxsel(struct bttv *btv, unsigned int input) 3237 { 3238 unsigned int inmux = input % 16; 3239 gpio_inout(0xf, 0xf); 3240 gpio_bits(0xf, inmux); 3241 } 3242 3243 /* 3244 * The TD3116 has 2 74HC4051 muxes wired to the MUX0 input of a bt878. 3245 * The first 74HC4051 has the lower 8 inputs, the second one the higher 8. 3246 * The muxes are controlled via a 74HC373 latch which is connected to 3247 * GPIOs 0-7. GPIO 18 is connected to the LE signal of the latch. 3248 * Q0 of the latch is connected to the Enable (~E) input of the first 3249 * 74HC4051. Q1 - Q3 are connected to S0 - S2 of the same 74HC4051. 3250 * Q4 - Q7 are connected to the second 74HC4051 in the same way. 3251 */ 3252 3253 static void td3116_latch_value(struct bttv *btv, u32 value) 3254 { 3255 gpio_bits((1<<18) | 0xff, value); 3256 gpio_bits((1<<18) | 0xff, (1<<18) | value); 3257 udelay(1); 3258 gpio_bits((1<<18) | 0xff, value); 3259 } 3260 3261 static void td3116_muxsel(struct bttv *btv, unsigned int input) 3262 { 3263 u32 value; 3264 u32 highbit; 3265 3266 highbit = (input & 0x8) >> 3 ; 3267 3268 /* Disable outputs and set value in the mux */ 3269 value = 0x11; /* Disable outputs */ 3270 value |= ((input & 0x7) << 1) << (4 * highbit); 3271 td3116_latch_value(btv, value); 3272 3273 /* Enable the correct output */ 3274 value &= ~0x11; 3275 value |= ((highbit ^ 0x1) << 4) | highbit; 3276 td3116_latch_value(btv, value); 3277 } 3278 3279 /* ----------------------------------------------------------------------- */ 3280 3281 static void bttv_reset_audio(struct bttv *btv) 3282 { 3283 /* 3284 * BT878A has a audio-reset register. 3285 * 1. This register is an audio reset function but it is in 3286 * function-0 (video capture) address space. 3287 * 2. It is enough to do this once per power-up of the card. 3288 * 3. There is a typo in the Conexant doc -- it is not at 3289 * 0x5B, but at 0x058. (B is an odd-number, obviously a typo!). 3290 * --//Shrikumar 030609 3291 */ 3292 if (btv->id != 878) 3293 return; 3294 3295 if (bttv_debug) 3296 pr_debug("%d: BT878A ARESET\n", btv->c.nr); 3297 btwrite((1<<7), 0x058); 3298 udelay(10); 3299 btwrite( 0, 0x058); 3300 } 3301 3302 /* initialization part one -- before registering i2c bus */ 3303 void bttv_init_card1(struct bttv *btv) 3304 { 3305 switch (btv->c.type) { 3306 case BTTV_BOARD_HAUPPAUGE: 3307 case BTTV_BOARD_HAUPPAUGE878: 3308 boot_msp34xx(btv,5); 3309 break; 3310 case BTTV_BOARD_VOODOOTV_200: 3311 case BTTV_BOARD_VOODOOTV_FM: 3312 boot_msp34xx(btv,20); 3313 break; 3314 case BTTV_BOARD_AVERMEDIA98: 3315 boot_msp34xx(btv,11); 3316 break; 3317 case BTTV_BOARD_HAUPPAUGEPVR: 3318 pvr_boot(btv); 3319 break; 3320 case BTTV_BOARD_TWINHAN_DST: 3321 case BTTV_BOARD_AVDVBT_771: 3322 case BTTV_BOARD_PINNACLESAT: 3323 btv->use_i2c_hw = 1; 3324 break; 3325 case BTTV_BOARD_ADLINK_RTV24: 3326 init_RTV24( btv ); 3327 break; 3328 case BTTV_BOARD_PCI_8604PW: 3329 init_PCI8604PW(btv); 3330 break; 3331 3332 } 3333 if (!bttv_tvcards[btv->c.type].has_dvb) 3334 bttv_reset_audio(btv); 3335 } 3336 3337 /* initialization part two -- after registering i2c bus */ 3338 void bttv_init_card2(struct bttv *btv) 3339 { 3340 btv->tuner_type = UNSET; 3341 3342 if (BTTV_BOARD_UNKNOWN == btv->c.type) { 3343 bttv_readee(btv,eeprom_data,0xa0); 3344 identify_by_eeprom(btv,eeprom_data); 3345 } 3346 3347 switch (btv->c.type) { 3348 case BTTV_BOARD_MIRO: 3349 case BTTV_BOARD_MIROPRO: 3350 case BTTV_BOARD_PINNACLE: 3351 case BTTV_BOARD_PINNACLEPRO: 3352 /* miro/pinnacle */ 3353 miro_pinnacle_gpio(btv); 3354 break; 3355 case BTTV_BOARD_FLYVIDEO_98: 3356 case BTTV_BOARD_MAXI: 3357 case BTTV_BOARD_LIFE_FLYKIT: 3358 case BTTV_BOARD_FLYVIDEO: 3359 case BTTV_BOARD_TYPHOON_TVIEW: 3360 case BTTV_BOARD_CHRONOS_VS2: 3361 case BTTV_BOARD_FLYVIDEO_98FM: 3362 case BTTV_BOARD_FLYVIDEO2000: 3363 case BTTV_BOARD_FLYVIDEO98EZ: 3364 case BTTV_BOARD_CONFERENCETV: 3365 case BTTV_BOARD_LIFETEC_9415: 3366 flyvideo_gpio(btv); 3367 break; 3368 case BTTV_BOARD_HAUPPAUGE: 3369 case BTTV_BOARD_HAUPPAUGE878: 3370 case BTTV_BOARD_HAUPPAUGEPVR: 3371 /* pick up some config infos from the eeprom */ 3372 bttv_readee(btv,eeprom_data,0xa0); 3373 hauppauge_eeprom(btv); 3374 break; 3375 case BTTV_BOARD_AVERMEDIA98: 3376 case BTTV_BOARD_AVPHONE98: 3377 bttv_readee(btv,eeprom_data,0xa0); 3378 avermedia_eeprom(btv); 3379 break; 3380 case BTTV_BOARD_PXC200: 3381 init_PXC200(btv); 3382 break; 3383 case BTTV_BOARD_PICOLO_TETRA_CHIP: 3384 picolo_tetra_init(btv); 3385 break; 3386 case BTTV_BOARD_VHX: 3387 btv->has_radio = 1; 3388 btv->has_tea575x = 1; 3389 btv->tea_gpio.wren = 5; 3390 btv->tea_gpio.most = 6; 3391 btv->tea_gpio.clk = 3; 3392 btv->tea_gpio.data = 4; 3393 tea575x_init(btv); 3394 break; 3395 case BTTV_BOARD_VOBIS_BOOSTAR: 3396 case BTTV_BOARD_TERRATV: 3397 terratec_active_radio_upgrade(btv); 3398 break; 3399 case BTTV_BOARD_MAGICTVIEW061: 3400 if (btv->cardid == 0x3002144f) { 3401 btv->has_radio=1; 3402 pr_info("%d: radio detected by subsystem id (CPH05x)\n", 3403 btv->c.nr); 3404 } 3405 break; 3406 case BTTV_BOARD_STB2: 3407 if (btv->cardid == 0x3060121a) { 3408 /* Fix up entry for 3DFX VoodooTV 100, 3409 which is an OEM STB card variant. */ 3410 btv->has_radio=0; 3411 btv->tuner_type=TUNER_TEMIC_NTSC; 3412 } 3413 break; 3414 case BTTV_BOARD_OSPREY1x0: 3415 case BTTV_BOARD_OSPREY1x0_848: 3416 case BTTV_BOARD_OSPREY101_848: 3417 case BTTV_BOARD_OSPREY1x1: 3418 case BTTV_BOARD_OSPREY1x1_SVID: 3419 case BTTV_BOARD_OSPREY2xx: 3420 case BTTV_BOARD_OSPREY2x0_SVID: 3421 case BTTV_BOARD_OSPREY2x0: 3422 case BTTV_BOARD_OSPREY440: 3423 case BTTV_BOARD_OSPREY500: 3424 case BTTV_BOARD_OSPREY540: 3425 case BTTV_BOARD_OSPREY2000: 3426 bttv_readee(btv,eeprom_data,0xa0); 3427 osprey_eeprom(btv, eeprom_data); 3428 break; 3429 case BTTV_BOARD_IDS_EAGLE: 3430 init_ids_eagle(btv); 3431 break; 3432 case BTTV_BOARD_MODTEC_205: 3433 bttv_readee(btv,eeprom_data,0xa0); 3434 modtec_eeprom(btv); 3435 break; 3436 case BTTV_BOARD_LMLBT4: 3437 init_lmlbt4x(btv); 3438 break; 3439 case BTTV_BOARD_TIBET_CS16: 3440 tibetCS16_init(btv); 3441 break; 3442 case BTTV_BOARD_KODICOM_4400R: 3443 kodicom4400r_init(btv); 3444 break; 3445 case BTTV_BOARD_GEOVISION_GV800S: 3446 gv800s_init(btv); 3447 break; 3448 } 3449 3450 /* pll configuration */ 3451 if (!(btv->id==848 && btv->revision==0x11)) { 3452 /* defaults from card list */ 3453 if (PLL_28 == bttv_tvcards[btv->c.type].pll) { 3454 btv->pll.pll_ifreq=28636363; 3455 btv->pll.pll_crystal=BT848_IFORM_XT0; 3456 } 3457 if (PLL_35 == bttv_tvcards[btv->c.type].pll) { 3458 btv->pll.pll_ifreq=35468950; 3459 btv->pll.pll_crystal=BT848_IFORM_XT1; 3460 } 3461 if (PLL_14 == bttv_tvcards[btv->c.type].pll) { 3462 btv->pll.pll_ifreq = 14318181; 3463 btv->pll.pll_crystal = BT848_IFORM_XT0; 3464 } 3465 /* insmod options can override */ 3466 switch (pll[btv->c.nr]) { 3467 case 0: /* none */ 3468 btv->pll.pll_crystal = 0; 3469 btv->pll.pll_ifreq = 0; 3470 btv->pll.pll_ofreq = 0; 3471 break; 3472 case 1: /* 28 MHz */ 3473 case 28: 3474 btv->pll.pll_ifreq = 28636363; 3475 btv->pll.pll_ofreq = 0; 3476 btv->pll.pll_crystal = BT848_IFORM_XT0; 3477 break; 3478 case 2: /* 35 MHz */ 3479 case 35: 3480 btv->pll.pll_ifreq = 35468950; 3481 btv->pll.pll_ofreq = 0; 3482 btv->pll.pll_crystal = BT848_IFORM_XT1; 3483 break; 3484 case 3: /* 14 MHz */ 3485 case 14: 3486 btv->pll.pll_ifreq = 14318181; 3487 btv->pll.pll_ofreq = 0; 3488 btv->pll.pll_crystal = BT848_IFORM_XT0; 3489 break; 3490 } 3491 } 3492 btv->pll.pll_current = -1; 3493 3494 /* tuner configuration (from card list / autodetect / insmod option) */ 3495 if (UNSET != bttv_tvcards[btv->c.type].tuner_type) 3496 if (UNSET == btv->tuner_type) 3497 btv->tuner_type = bttv_tvcards[btv->c.type].tuner_type; 3498 if (UNSET != tuner[btv->c.nr]) 3499 btv->tuner_type = tuner[btv->c.nr]; 3500 3501 if (btv->tuner_type == TUNER_ABSENT) 3502 pr_info("%d: tuner absent\n", btv->c.nr); 3503 else if (btv->tuner_type == UNSET) 3504 pr_warn("%d: tuner type unset\n", btv->c.nr); 3505 else 3506 pr_info("%d: tuner type=%d\n", btv->c.nr, btv->tuner_type); 3507 3508 if (autoload != UNSET) { 3509 pr_warn("%d: the autoload option is obsolete\n", btv->c.nr); 3510 pr_warn("%d: use option msp3400, tda7432 or tvaudio to override which audio module should be used\n", 3511 btv->c.nr); 3512 } 3513 3514 if (UNSET == btv->tuner_type) 3515 btv->tuner_type = TUNER_ABSENT; 3516 3517 btv->dig = bttv_tvcards[btv->c.type].has_dig_in ? 3518 bttv_tvcards[btv->c.type].video_inputs - 1 : UNSET; 3519 btv->svhs = bttv_tvcards[btv->c.type].svhs == NO_SVHS ? 3520 UNSET : bttv_tvcards[btv->c.type].svhs; 3521 if (svhs[btv->c.nr] != UNSET) 3522 btv->svhs = svhs[btv->c.nr]; 3523 if (remote[btv->c.nr] != UNSET) 3524 btv->has_remote = remote[btv->c.nr]; 3525 3526 if (bttv_tvcards[btv->c.type].has_radio) 3527 btv->has_radio = 1; 3528 if (bttv_tvcards[btv->c.type].has_remote) 3529 btv->has_remote = 1; 3530 if (!bttv_tvcards[btv->c.type].no_gpioirq) 3531 btv->gpioirq = 1; 3532 if (bttv_tvcards[btv->c.type].volume_gpio) 3533 btv->volume_gpio = bttv_tvcards[btv->c.type].volume_gpio; 3534 if (bttv_tvcards[btv->c.type].audio_mode_gpio) 3535 btv->audio_mode_gpio = bttv_tvcards[btv->c.type].audio_mode_gpio; 3536 3537 if (btv->tuner_type == TUNER_ABSENT) 3538 return; /* no tuner or related drivers to load */ 3539 3540 if (btv->has_saa6588 || saa6588[btv->c.nr]) { 3541 /* Probe for RDS receiver chip */ 3542 static const unsigned short addrs[] = { 3543 0x20 >> 1, 3544 0x22 >> 1, 3545 I2C_CLIENT_END 3546 }; 3547 struct v4l2_subdev *sd; 3548 3549 sd = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3550 &btv->c.i2c_adap, "saa6588", 0, addrs); 3551 btv->has_saa6588 = (sd != NULL); 3552 } 3553 3554 /* try to detect audio/fader chips */ 3555 3556 /* First check if the user specified the audio chip via a module 3557 option. */ 3558 3559 switch (audiodev[btv->c.nr]) { 3560 case -1: 3561 return; /* do not load any audio module */ 3562 3563 case 0: /* autodetect */ 3564 break; 3565 3566 case 1: { 3567 /* The user specified that we should probe for msp3400 */ 3568 static const unsigned short addrs[] = { 3569 I2C_ADDR_MSP3400 >> 1, 3570 I2C_ADDR_MSP3400_ALT >> 1, 3571 I2C_CLIENT_END 3572 }; 3573 3574 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3575 &btv->c.i2c_adap, "msp3400", 0, addrs); 3576 if (btv->sd_msp34xx) 3577 return; 3578 goto no_audio; 3579 } 3580 3581 case 2: { 3582 /* The user specified that we should probe for tda7432 */ 3583 static const unsigned short addrs[] = { 3584 I2C_ADDR_TDA7432 >> 1, 3585 I2C_CLIENT_END 3586 }; 3587 3588 if (v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3589 &btv->c.i2c_adap, "tda7432", 0, addrs)) 3590 return; 3591 goto no_audio; 3592 } 3593 3594 case 3: { 3595 /* The user specified that we should probe for tvaudio */ 3596 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3597 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); 3598 if (btv->sd_tvaudio) 3599 return; 3600 goto no_audio; 3601 } 3602 3603 default: 3604 pr_warn("%d: unknown audiodev value!\n", btv->c.nr); 3605 return; 3606 } 3607 3608 /* There were no overrides, so now we try to discover this through the 3609 card definition */ 3610 3611 /* probe for msp3400 first: this driver can detect whether or not 3612 it really is a msp3400, so it will return NULL when the device 3613 found is really something else (e.g. a tea6300). */ 3614 if (!bttv_tvcards[btv->c.type].no_msp34xx) { 3615 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3616 &btv->c.i2c_adap, "msp3400", 3617 0, I2C_ADDRS(I2C_ADDR_MSP3400 >> 1)); 3618 } else if (bttv_tvcards[btv->c.type].msp34xx_alt) { 3619 btv->sd_msp34xx = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3620 &btv->c.i2c_adap, "msp3400", 3621 0, I2C_ADDRS(I2C_ADDR_MSP3400_ALT >> 1)); 3622 } 3623 3624 /* If we found a msp34xx, then we're done. */ 3625 if (btv->sd_msp34xx) 3626 return; 3627 3628 /* Now see if we can find one of the tvaudio devices. */ 3629 btv->sd_tvaudio = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3630 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); 3631 if (btv->sd_tvaudio) { 3632 /* There may be two tvaudio chips on the card, so try to 3633 find another. */ 3634 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3635 &btv->c.i2c_adap, "tvaudio", 0, tvaudio_addrs()); 3636 } 3637 3638 /* it might also be a tda7432. */ 3639 if (!bttv_tvcards[btv->c.type].no_tda7432) { 3640 static const unsigned short addrs[] = { 3641 I2C_ADDR_TDA7432 >> 1, 3642 I2C_CLIENT_END 3643 }; 3644 3645 btv->sd_tda7432 = v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3646 &btv->c.i2c_adap, "tda7432", 0, addrs); 3647 if (btv->sd_tda7432) 3648 return; 3649 } 3650 if (btv->sd_tvaudio) 3651 return; 3652 3653 no_audio: 3654 pr_warn("%d: audio absent, no audio device found!\n", btv->c.nr); 3655 } 3656 3657 3658 /* initialize the tuner */ 3659 void bttv_init_tuner(struct bttv *btv) 3660 { 3661 int addr = ADDR_UNSET; 3662 3663 if (ADDR_UNSET != bttv_tvcards[btv->c.type].tuner_addr) 3664 addr = bttv_tvcards[btv->c.type].tuner_addr; 3665 3666 if (btv->tuner_type != TUNER_ABSENT) { 3667 struct tuner_setup tun_setup; 3668 3669 /* Load tuner module before issuing tuner config call! */ 3670 if (btv->has_radio) 3671 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3672 &btv->c.i2c_adap, "tuner", 3673 0, v4l2_i2c_tuner_addrs(ADDRS_RADIO)); 3674 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3675 &btv->c.i2c_adap, "tuner", 3676 0, v4l2_i2c_tuner_addrs(ADDRS_DEMOD)); 3677 v4l2_i2c_new_subdev(&btv->c.v4l2_dev, 3678 &btv->c.i2c_adap, "tuner", 3679 0, v4l2_i2c_tuner_addrs(ADDRS_TV_WITH_DEMOD)); 3680 3681 tun_setup.mode_mask = T_ANALOG_TV; 3682 tun_setup.type = btv->tuner_type; 3683 tun_setup.addr = addr; 3684 3685 if (btv->has_radio) 3686 tun_setup.mode_mask |= T_RADIO; 3687 3688 bttv_call_all(btv, tuner, s_type_addr, &tun_setup); 3689 } 3690 3691 if (btv->tda9887_conf) { 3692 struct v4l2_priv_tun_config tda9887_cfg; 3693 3694 tda9887_cfg.tuner = TUNER_TDA9887; 3695 tda9887_cfg.priv = &btv->tda9887_conf; 3696 3697 bttv_call_all(btv, tuner, s_config, &tda9887_cfg); 3698 } 3699 } 3700 3701 /* ----------------------------------------------------------------------- */ 3702 3703 static void modtec_eeprom(struct bttv *btv) 3704 { 3705 if( strncmp(&(eeprom_data[0x1e]),"Temic 4066 FY5",14) ==0) { 3706 btv->tuner_type=TUNER_TEMIC_4066FY5_PAL_I; 3707 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", 3708 btv->c.nr, &eeprom_data[0x1e]); 3709 } else if (strncmp(&(eeprom_data[0x1e]),"Alps TSBB5",10) ==0) { 3710 btv->tuner_type=TUNER_ALPS_TSBB5_PAL_I; 3711 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", 3712 btv->c.nr, &eeprom_data[0x1e]); 3713 } else if (strncmp(&(eeprom_data[0x1e]),"Philips FM1246",14) ==0) { 3714 btv->tuner_type=TUNER_PHILIPS_NTSC; 3715 pr_info("%d: Modtec: Tuner autodetected by eeprom: %s\n", 3716 btv->c.nr, &eeprom_data[0x1e]); 3717 } else { 3718 pr_info("%d: Modtec: Unknown TunerString: %s\n", 3719 btv->c.nr, &eeprom_data[0x1e]); 3720 } 3721 } 3722 3723 static void hauppauge_eeprom(struct bttv *btv) 3724 { 3725 struct tveeprom tv; 3726 3727 tveeprom_hauppauge_analog(&tv, eeprom_data); 3728 btv->tuner_type = tv.tuner_type; 3729 btv->has_radio = tv.has_radio; 3730 3731 pr_info("%d: Hauppauge eeprom indicates model#%d\n", 3732 btv->c.nr, tv.model); 3733 3734 /* 3735 * Some of the 878 boards have duplicate PCI IDs. Switch the board 3736 * type based on model #. 3737 */ 3738 if(tv.model == 64900) { 3739 pr_info("%d: Switching board type from %s to %s\n", 3740 btv->c.nr, 3741 bttv_tvcards[btv->c.type].name, 3742 bttv_tvcards[BTTV_BOARD_HAUPPAUGE_IMPACTVCB].name); 3743 btv->c.type = BTTV_BOARD_HAUPPAUGE_IMPACTVCB; 3744 } 3745 3746 /* The 61334 needs the msp3410 to do the radio demod to get sound */ 3747 if (tv.model == 61334) 3748 btv->radio_uses_msp_demodulator = 1; 3749 } 3750 3751 /* ----------------------------------------------------------------------- */ 3752 3753 static void bttv_tea575x_set_pins(struct snd_tea575x *tea, u8 pins) 3754 { 3755 struct bttv *btv = tea->private_data; 3756 struct bttv_tea575x_gpio gpio = btv->tea_gpio; 3757 u16 val = 0; 3758 3759 val |= (pins & TEA575X_DATA) ? (1 << gpio.data) : 0; 3760 val |= (pins & TEA575X_CLK) ? (1 << gpio.clk) : 0; 3761 val |= (pins & TEA575X_WREN) ? (1 << gpio.wren) : 0; 3762 3763 gpio_bits((1 << gpio.data) | (1 << gpio.clk) | (1 << gpio.wren), val); 3764 if (btv->mbox_ior) { 3765 /* IOW and CSEL active */ 3766 gpio_bits(btv->mbox_iow | btv->mbox_csel, 0); 3767 udelay(5); 3768 /* all inactive */ 3769 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, 3770 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); 3771 } 3772 } 3773 3774 static u8 bttv_tea575x_get_pins(struct snd_tea575x *tea) 3775 { 3776 struct bttv *btv = tea->private_data; 3777 struct bttv_tea575x_gpio gpio = btv->tea_gpio; 3778 u8 ret = 0; 3779 u16 val; 3780 3781 if (btv->mbox_ior) { 3782 /* IOR and CSEL active */ 3783 gpio_bits(btv->mbox_ior | btv->mbox_csel, 0); 3784 udelay(5); 3785 } 3786 val = gpio_read(); 3787 if (btv->mbox_ior) { 3788 /* all inactive */ 3789 gpio_bits(btv->mbox_ior | btv->mbox_iow | btv->mbox_csel, 3790 btv->mbox_ior | btv->mbox_iow | btv->mbox_csel); 3791 } 3792 3793 if (val & (1 << gpio.data)) 3794 ret |= TEA575X_DATA; 3795 if (val & (1 << gpio.most)) 3796 ret |= TEA575X_MOST; 3797 3798 return ret; 3799 } 3800 3801 static void bttv_tea575x_set_direction(struct snd_tea575x *tea, bool output) 3802 { 3803 struct bttv *btv = tea->private_data; 3804 struct bttv_tea575x_gpio gpio = btv->tea_gpio; 3805 u32 mask = (1 << gpio.clk) | (1 << gpio.wren) | (1 << gpio.data) | 3806 (1 << gpio.most); 3807 3808 if (output) 3809 gpio_inout(mask, (1 << gpio.data) | (1 << gpio.clk) | 3810 (1 << gpio.wren)); 3811 else 3812 gpio_inout(mask, (1 << gpio.clk) | (1 << gpio.wren)); 3813 } 3814 3815 static const struct snd_tea575x_ops bttv_tea_ops = { 3816 .set_pins = bttv_tea575x_set_pins, 3817 .get_pins = bttv_tea575x_get_pins, 3818 .set_direction = bttv_tea575x_set_direction, 3819 }; 3820 3821 static int tea575x_init(struct bttv *btv) 3822 { 3823 btv->tea.private_data = btv; 3824 btv->tea.ops = &bttv_tea_ops; 3825 if (!snd_tea575x_hw_init(&btv->tea)) { 3826 pr_info("%d: detected TEA575x radio\n", btv->c.nr); 3827 btv->tea.mute = false; 3828 return 0; 3829 } 3830 3831 btv->has_tea575x = 0; 3832 btv->has_radio = 0; 3833 3834 return -ENODEV; 3835 } 3836 3837 /* ----------------------------------------------------------------------- */ 3838 3839 static int terratec_active_radio_upgrade(struct bttv *btv) 3840 { 3841 btv->has_radio = 1; 3842 btv->has_tea575x = 1; 3843 btv->tea_gpio.wren = 4; 3844 btv->tea_gpio.most = 5; 3845 btv->tea_gpio.clk = 3; 3846 btv->tea_gpio.data = 2; 3847 3848 btv->mbox_iow = 1 << 8; 3849 btv->mbox_ior = 1 << 9; 3850 btv->mbox_csel = 1 << 10; 3851 3852 if (!tea575x_init(btv)) { 3853 pr_info("%d: Terratec Active Radio Upgrade found\n", btv->c.nr); 3854 btv->has_saa6588 = 1; 3855 } 3856 3857 return 0; 3858 } 3859 3860 3861 /* ----------------------------------------------------------------------- */ 3862 3863 /* 3864 * minimal bootstrap for the WinTV/PVR -- upload altera firmware. 3865 * 3866 * The hcwamc.rbf firmware file is on the Hauppauge driver CD. Have 3867 * a look at Pvr/pvr45xxx.EXE (self-extracting zip archive, can be 3868 * unpacked with unzip). 3869 */ 3870 #define PVR_GPIO_DELAY 10 3871 3872 #define BTTV_ALT_DATA 0x000001 3873 #define BTTV_ALT_DCLK 0x100000 3874 #define BTTV_ALT_NCONFIG 0x800000 3875 3876 static int pvr_altera_load(struct bttv *btv, const u8 *micro, u32 microlen) 3877 { 3878 u32 n; 3879 u8 bits; 3880 int i; 3881 3882 gpio_inout(0xffffff,BTTV_ALT_DATA|BTTV_ALT_DCLK|BTTV_ALT_NCONFIG); 3883 gpio_write(0); 3884 udelay(PVR_GPIO_DELAY); 3885 3886 gpio_write(BTTV_ALT_NCONFIG); 3887 udelay(PVR_GPIO_DELAY); 3888 3889 for (n = 0; n < microlen; n++) { 3890 bits = micro[n]; 3891 for (i = 0 ; i < 8 ; i++) { 3892 gpio_bits(BTTV_ALT_DCLK,0); 3893 if (bits & 0x01) 3894 gpio_bits(BTTV_ALT_DATA,BTTV_ALT_DATA); 3895 else 3896 gpio_bits(BTTV_ALT_DATA,0); 3897 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); 3898 bits >>= 1; 3899 } 3900 } 3901 gpio_bits(BTTV_ALT_DCLK,0); 3902 udelay(PVR_GPIO_DELAY); 3903 3904 /* begin Altera init loop (Not necessary,but doesn't hurt) */ 3905 for (i = 0 ; i < 30 ; i++) { 3906 gpio_bits(BTTV_ALT_DCLK,0); 3907 gpio_bits(BTTV_ALT_DCLK,BTTV_ALT_DCLK); 3908 } 3909 gpio_bits(BTTV_ALT_DCLK,0); 3910 return 0; 3911 } 3912 3913 static int pvr_boot(struct bttv *btv) 3914 { 3915 const struct firmware *fw_entry; 3916 int rc; 3917 3918 rc = request_firmware(&fw_entry, "hcwamc.rbf", &btv->c.pci->dev); 3919 if (rc != 0) { 3920 pr_warn("%d: no altera firmware [via hotplug]\n", btv->c.nr); 3921 return rc; 3922 } 3923 rc = pvr_altera_load(btv, fw_entry->data, fw_entry->size); 3924 pr_info("%d: altera firmware upload %s\n", 3925 btv->c.nr, (rc < 0) ? "failed" : "ok"); 3926 release_firmware(fw_entry); 3927 return rc; 3928 } 3929 3930 /* ----------------------------------------------------------------------- */ 3931 /* some osprey specific stuff */ 3932 3933 static void osprey_eeprom(struct bttv *btv, const u8 ee[256]) 3934 { 3935 int i; 3936 u32 serial = 0; 3937 int cardid = -1; 3938 3939 /* This code will nevery actually get called in this case.... */ 3940 if (btv->c.type == BTTV_BOARD_UNKNOWN) { 3941 /* this might be an antique... check for MMAC label in eeprom */ 3942 if (!strncmp(ee, "MMAC", 4)) { 3943 u8 checksum = 0; 3944 for (i = 0; i < 21; i++) 3945 checksum += ee[i]; 3946 if (checksum != ee[21]) 3947 return; 3948 cardid = BTTV_BOARD_OSPREY1x0_848; 3949 for (i = 12; i < 21; i++) 3950 serial *= 10, serial += ee[i] - '0'; 3951 } 3952 } else { 3953 unsigned short type; 3954 3955 for (i = 4 * 16; i < 8 * 16; i += 16) { 3956 u16 checksum = (__force u16)ip_compute_csum(ee + i, 16); 3957 3958 if ((checksum & 0xff) + (checksum >> 8) == 0xff) 3959 break; 3960 } 3961 if (i >= 8*16) 3962 return; 3963 ee += i; 3964 3965 /* found a valid descriptor */ 3966 type = get_unaligned_be16((__be16 *)(ee+4)); 3967 3968 switch(type) { 3969 /* 848 based */ 3970 case 0x0004: 3971 cardid = BTTV_BOARD_OSPREY1x0_848; 3972 break; 3973 case 0x0005: 3974 cardid = BTTV_BOARD_OSPREY101_848; 3975 break; 3976 3977 /* 878 based */ 3978 case 0x0012: 3979 case 0x0013: 3980 cardid = BTTV_BOARD_OSPREY1x0; 3981 break; 3982 case 0x0014: 3983 case 0x0015: 3984 cardid = BTTV_BOARD_OSPREY1x1; 3985 break; 3986 case 0x0016: 3987 case 0x0017: 3988 case 0x0020: 3989 cardid = BTTV_BOARD_OSPREY1x1_SVID; 3990 break; 3991 case 0x0018: 3992 case 0x0019: 3993 case 0x001E: 3994 case 0x001F: 3995 cardid = BTTV_BOARD_OSPREY2xx; 3996 break; 3997 case 0x001A: 3998 case 0x001B: 3999 cardid = BTTV_BOARD_OSPREY2x0_SVID; 4000 break; 4001 case 0x0040: 4002 cardid = BTTV_BOARD_OSPREY500; 4003 break; 4004 case 0x0050: 4005 case 0x0056: 4006 cardid = BTTV_BOARD_OSPREY540; 4007 /* bttv_osprey_540_init(btv); */ 4008 break; 4009 case 0x0060: 4010 case 0x0070: 4011 case 0x00A0: 4012 cardid = BTTV_BOARD_OSPREY2x0; 4013 /* enable output on select control lines */ 4014 gpio_inout(0xffffff,0x000303); 4015 break; 4016 case 0x00D8: 4017 cardid = BTTV_BOARD_OSPREY440; 4018 break; 4019 default: 4020 /* unknown...leave generic, but get serial # */ 4021 pr_info("%d: osprey eeprom: unknown card type 0x%04x\n", 4022 btv->c.nr, type); 4023 break; 4024 } 4025 serial = get_unaligned_be32((__be32 *)(ee+6)); 4026 } 4027 4028 pr_info("%d: osprey eeprom: card=%d '%s' serial=%u\n", 4029 btv->c.nr, cardid, 4030 cardid > 0 ? bttv_tvcards[cardid].name : "Unknown", serial); 4031 4032 if (cardid<0 || btv->c.type == cardid) 4033 return; 4034 4035 /* card type isn't set correctly */ 4036 if (card[btv->c.nr] < bttv_num_tvcards) { 4037 pr_warn("%d: osprey eeprom: Not overriding user specified card type\n", 4038 btv->c.nr); 4039 } else { 4040 pr_info("%d: osprey eeprom: Changing card type from %d to %d\n", 4041 btv->c.nr, btv->c.type, cardid); 4042 btv->c.type = cardid; 4043 } 4044 } 4045 4046 /* ----------------------------------------------------------------------- */ 4047 /* AVermedia specific stuff, from bktr_card.c */ 4048 4049 static int tuner_0_table[] = { 4050 TUNER_PHILIPS_NTSC, TUNER_PHILIPS_PAL /* PAL-BG*/, 4051 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL /* PAL-I*/, 4052 TUNER_PHILIPS_PAL, TUNER_PHILIPS_PAL, 4053 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_SECAM, 4054 TUNER_PHILIPS_SECAM, TUNER_PHILIPS_PAL, 4055 TUNER_PHILIPS_FM1216ME_MK3 }; 4056 4057 static int tuner_1_table[] = { 4058 TUNER_TEMIC_NTSC, TUNER_TEMIC_PAL, 4059 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, 4060 TUNER_TEMIC_PAL, TUNER_TEMIC_PAL, 4061 TUNER_TEMIC_4012FY5, TUNER_TEMIC_4012FY5, /* TUNER_TEMIC_SECAM */ 4062 TUNER_TEMIC_4012FY5, TUNER_TEMIC_PAL}; 4063 4064 static void avermedia_eeprom(struct bttv *btv) 4065 { 4066 int tuner_make, tuner_tv_fm, tuner_format, tuner_type = 0; 4067 4068 tuner_make = (eeprom_data[0x41] & 0x7); 4069 tuner_tv_fm = (eeprom_data[0x41] & 0x18) >> 3; 4070 tuner_format = (eeprom_data[0x42] & 0xf0) >> 4; 4071 btv->has_remote = (eeprom_data[0x42] & 0x01); 4072 4073 if (tuner_make == 0 || tuner_make == 2) 4074 if (tuner_format <= 0x0a) 4075 tuner_type = tuner_0_table[tuner_format]; 4076 if (tuner_make == 1) 4077 if (tuner_format <= 9) 4078 tuner_type = tuner_1_table[tuner_format]; 4079 4080 if (tuner_make == 4) 4081 if (tuner_format == 0x09) 4082 tuner_type = TUNER_LG_NTSC_NEW_TAPC; /* TAPC-G702P */ 4083 4084 pr_info("%d: Avermedia eeprom[0x%02x%02x]: tuner=", 4085 btv->c.nr, eeprom_data[0x41], eeprom_data[0x42]); 4086 if (tuner_type) { 4087 btv->tuner_type = tuner_type; 4088 pr_cont("%d", tuner_type); 4089 } else 4090 pr_cont("Unknown type"); 4091 pr_cont(" radio:%s remote control:%s\n", 4092 tuner_tv_fm ? "yes" : "no", 4093 btv->has_remote ? "yes" : "no"); 4094 } 4095 4096 /* 4097 * For Voodoo TV/FM and Voodoo 200. These cards' tuners use a TDA9880 4098 * analog demod, which is not I2C controlled like the newer and more common 4099 * TDA9887 series. Instead is has two tri-state input pins, S0 and S1, 4100 * that control the IF for the video and audio. Apparently, bttv GPIO 4101 * 0x10000 is connected to S0. S0 low selects a 38.9 MHz VIF for B/G/D/K/I 4102 * (i.e., PAL) while high selects 45.75 MHz for M/N (i.e., NTSC). 4103 */ 4104 u32 bttv_tda9880_setnorm(struct bttv *btv, u32 gpiobits) 4105 { 4106 4107 if (btv->audio_input == TVAUDIO_INPUT_TUNER) { 4108 if (bttv_tvnorms[btv->tvnorm].v4l2_id & V4L2_STD_MN) 4109 gpiobits |= 0x10000; 4110 else 4111 gpiobits &= ~0x10000; 4112 } 4113 4114 gpio_bits(bttv_tvcards[btv->c.type].gpiomask, gpiobits); 4115 return gpiobits; 4116 } 4117 4118 4119 /* 4120 * reset/enable the MSP on some Hauppauge cards 4121 * Thanks to Kyösti Mälkki (kmalkki@cc.hut.fi)! 4122 * 4123 * Hauppauge: pin 5 4124 * Voodoo: pin 20 4125 */ 4126 static void boot_msp34xx(struct bttv *btv, int pin) 4127 { 4128 int mask = (1 << pin); 4129 4130 gpio_inout(mask,mask); 4131 gpio_bits(mask,0); 4132 mdelay(2); 4133 udelay(500); 4134 gpio_bits(mask,mask); 4135 4136 if (bttv_gpio) 4137 bttv_gpio_tracking(btv,"msp34xx"); 4138 if (bttv_verbose) 4139 pr_info("%d: Hauppauge/Voodoo msp34xx: reset line init [%d]\n", 4140 btv->c.nr, pin); 4141 } 4142 4143 /* ----------------------------------------------------------------------- */ 4144 /* Imagenation L-Model PXC200 Framegrabber */ 4145 /* This is basically the same procedure as 4146 * used by Alessandro Rubini in his pxc200 4147 * driver, but using BTTV functions */ 4148 4149 static void init_PXC200(struct bttv *btv) 4150 { 4151 static int vals[] = { 0x08, 0x09, 0x0a, 0x0b, 0x0d, 0x0d, 0x01, 0x02, 4152 0x03, 0x04, 0x05, 0x06, 0x00 }; 4153 unsigned int i; 4154 int tmp; 4155 u32 val; 4156 4157 /* Initialise GPIO-connevted stuff */ 4158 gpio_inout(0xffffff, (1<<13)); 4159 gpio_write(0); 4160 udelay(3); 4161 gpio_write(1<<13); 4162 /* GPIO inputs are pulled up, so no need to drive 4163 * reset pin any longer */ 4164 gpio_bits(0xffffff, 0); 4165 if (bttv_gpio) 4166 bttv_gpio_tracking(btv,"pxc200"); 4167 4168 /* we could/should try and reset/control the AD pots? but 4169 right now we simply turned off the crushing. Without 4170 this the AGC drifts drifts 4171 remember the EN is reverse logic --> 4172 setting BT848_ADC_AGC_EN disable the AGC 4173 tboult@eecs.lehigh.edu 4174 */ 4175 4176 btwrite(BT848_ADC_RESERVED|BT848_ADC_AGC_EN, BT848_ADC); 4177 4178 /* Initialise MAX517 DAC */ 4179 pr_info("Setting DAC reference voltage level ...\n"); 4180 bttv_I2CWrite(btv,0x5E,0,0x80,1); 4181 4182 /* Initialise 12C508 PIC */ 4183 /* The I2CWrite and I2CRead commmands are actually to the 4184 * same chips - but the R/W bit is included in the address 4185 * argument so the numbers are different */ 4186 4187 4188 pr_info("Initialising 12C508 PIC chip ...\n"); 4189 4190 /* First of all, enable the clock line. This is used in the PXC200-F */ 4191 val = btread(BT848_GPIO_DMA_CTL); 4192 val |= BT848_GPIO_DMA_CTL_GPCLKMODE; 4193 btwrite(val, BT848_GPIO_DMA_CTL); 4194 4195 /* Then, push to 0 the reset pin long enough to reset the * 4196 * device same as above for the reset line, but not the same 4197 * value sent to the GPIO-connected stuff 4198 * which one is the good one? */ 4199 gpio_inout(0xffffff,(1<<2)); 4200 gpio_write(0); 4201 udelay(10); 4202 gpio_write(1<<2); 4203 4204 for (i = 0; i < ARRAY_SIZE(vals); i++) { 4205 tmp=bttv_I2CWrite(btv,0x1E,0,vals[i],1); 4206 if (tmp != -1) { 4207 pr_info("I2C Write(%2.2x) = %i\nI2C Read () = %2.2x\n\n", 4208 vals[i],tmp,bttv_I2CRead(btv,0x1F,NULL)); 4209 } 4210 } 4211 4212 pr_info("PXC200 Initialised\n"); 4213 } 4214 4215 4216 4217 /* ----------------------------------------------------------------------- */ 4218 /* 4219 * The Adlink RTV-24 (aka Angelo) has some special initialisation to unlock 4220 * it. This apparently involves the following procedure for each 878 chip: 4221 * 4222 * 1) write 0x00C3FEFF to the GPIO_OUT_EN register 4223 * 4224 * 2) write to GPIO_DATA 4225 * - 0x0E 4226 * - sleep 1ms 4227 * - 0x10 + 0x0E 4228 * - sleep 10ms 4229 * - 0x0E 4230 * read from GPIO_DATA into buf (uint_32) 4231 * - if ( data>>18 & 0x01 != 0) || ( buf>>19 & 0x01 != 1 ) 4232 * error. ERROR_CPLD_Check_Failed stop. 4233 * 4234 * 3) write to GPIO_DATA 4235 * - write 0x4400 + 0x0E 4236 * - sleep 10ms 4237 * - write 0x4410 + 0x0E 4238 * - sleep 1ms 4239 * - write 0x0E 4240 * read from GPIO_DATA into buf (uint_32) 4241 * - if ( buf>>18 & 0x01 ) || ( buf>>19 & 0x01 != 0 ) 4242 * error. ERROR_CPLD_Check_Failed. 4243 */ 4244 /* ----------------------------------------------------------------------- */ 4245 static void 4246 init_RTV24 (struct bttv *btv) 4247 { 4248 uint32_t dataRead = 0; 4249 long watchdog_value = 0x0E; 4250 4251 pr_info("%d: Adlink RTV-24 initialisation in progress ...\n", 4252 btv->c.nr); 4253 4254 btwrite (0x00c3feff, BT848_GPIO_OUT_EN); 4255 4256 btwrite (0 + watchdog_value, BT848_GPIO_DATA); 4257 msleep (1); 4258 btwrite (0x10 + watchdog_value, BT848_GPIO_DATA); 4259 msleep (10); 4260 btwrite (0 + watchdog_value, BT848_GPIO_DATA); 4261 4262 dataRead = btread (BT848_GPIO_DATA); 4263 4264 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 1)) { 4265 pr_info("%d: Adlink RTV-24 initialisation(1) ERROR_CPLD_Check_Failed (read %d)\n", 4266 btv->c.nr, dataRead); 4267 } 4268 4269 btwrite (0x4400 + watchdog_value, BT848_GPIO_DATA); 4270 msleep (10); 4271 btwrite (0x4410 + watchdog_value, BT848_GPIO_DATA); 4272 msleep (1); 4273 btwrite (watchdog_value, BT848_GPIO_DATA); 4274 msleep (1); 4275 dataRead = btread (BT848_GPIO_DATA); 4276 4277 if ((((dataRead >> 18) & 0x01) != 0) || (((dataRead >> 19) & 0x01) != 0)) { 4278 pr_info("%d: Adlink RTV-24 initialisation(2) ERROR_CPLD_Check_Failed (read %d)\n", 4279 btv->c.nr, dataRead); 4280 4281 return; 4282 } 4283 4284 pr_info("%d: Adlink RTV-24 initialisation complete\n", btv->c.nr); 4285 } 4286 4287 4288 4289 /* ----------------------------------------------------------------------- */ 4290 /* 4291 * The PCI-8604PW contains a CPLD, probably an ispMACH 4A, that filters 4292 * the PCI REQ signals comming from the four BT878 chips. After power 4293 * up, the CPLD does not forward requests to the bus, which prevents 4294 * the BT878 from fetching RISC instructions from memory. While the 4295 * CPLD is connected to most of the GPIOs of PCI device 0xD, only 4296 * five appear to play a role in unlocking the REQ signal. The following 4297 * sequence has been determined by trial and error without access to the 4298 * original driver. 4299 * 4300 * Eight GPIOs of device 0xC are provided on connector CN4 (4 in, 4 out). 4301 * Devices 0xE and 0xF do not appear to have anything connected to their 4302 * GPIOs. 4303 * 4304 * The correct GPIO_OUT_EN value might have some more bits set. It should 4305 * be possible to derive it from a boundary scan of the CPLD. Its JTAG 4306 * pins are routed to test points. 4307 * 4308 */ 4309 /* ----------------------------------------------------------------------- */ 4310 static void 4311 init_PCI8604PW(struct bttv *btv) 4312 { 4313 int state; 4314 4315 if ((PCI_SLOT(btv->c.pci->devfn) & ~3) != 0xC) { 4316 pr_warn("This is not a PCI-8604PW\n"); 4317 return; 4318 } 4319 4320 if (PCI_SLOT(btv->c.pci->devfn) != 0xD) 4321 return; 4322 4323 btwrite(0x080002, BT848_GPIO_OUT_EN); 4324 4325 state = (btread(BT848_GPIO_DATA) >> 21) & 7; 4326 4327 for (;;) { 4328 switch (state) { 4329 case 1: 4330 case 5: 4331 case 6: 4332 case 4: 4333 pr_debug("PCI-8604PW in state %i, toggling pin\n", 4334 state); 4335 btwrite(0x080000, BT848_GPIO_DATA); 4336 msleep(1); 4337 btwrite(0x000000, BT848_GPIO_DATA); 4338 msleep(1); 4339 break; 4340 case 7: 4341 pr_info("PCI-8604PW unlocked\n"); 4342 return; 4343 case 0: 4344 /* FIXME: If we are in state 7 and toggle GPIO[19] one 4345 more time, the CPLD goes into state 0, where PCI bus 4346 mastering is inhibited again. We have not managed to 4347 get out of that state. */ 4348 4349 pr_err("PCI-8604PW locked until reset\n"); 4350 return; 4351 default: 4352 pr_err("PCI-8604PW in unknown state %i\n", state); 4353 return; 4354 } 4355 4356 state = (state << 4) | ((btread(BT848_GPIO_DATA) >> 21) & 7); 4357 4358 switch (state) { 4359 case 0x15: 4360 case 0x56: 4361 case 0x64: 4362 case 0x47: 4363 /* The transition from state 7 to state 0 is, as explained 4364 above, valid but undesired and with this code impossible 4365 as we exit as soon as we are in state 7. 4366 case 0x70: */ 4367 break; 4368 default: 4369 pr_err("PCI-8604PW invalid transition %i -> %i\n", 4370 state >> 4, state & 7); 4371 return; 4372 } 4373 state &= 7; 4374 } 4375 } 4376 4377 /* RemoteVision MX (rv605) muxsel helper [Miguel Freitas] 4378 * 4379 * This is needed because rv605 don't use a normal multiplex, but a crosspoint 4380 * switch instead (CD22M3494E). This IC can have multiple active connections 4381 * between Xn (input) and Yn (output) pins. We need to clear any existing 4382 * connection prior to establish a new one, pulsing the STROBE pin. 4383 * 4384 * The board hardwire Y0 (xpoint) to MUX1 and MUXOUT to Yin. 4385 * GPIO pins are wired as: 4386 * GPIO[0:3] - AX[0:3] (xpoint) - P1[0:3] (microcontroller) 4387 * GPIO[4:6] - AY[0:2] (xpoint) - P1[4:6] (microcontroller) 4388 * GPIO[7] - DATA (xpoint) - P1[7] (microcontroller) 4389 * GPIO[8] - - P3[5] (microcontroller) 4390 * GPIO[9] - RESET (xpoint) - P3[6] (microcontroller) 4391 * GPIO[10] - STROBE (xpoint) - P3[7] (microcontroller) 4392 * GPINTR - - P3[4] (microcontroller) 4393 * 4394 * The microcontroller is a 80C32 like. It should be possible to change xpoint 4395 * configuration either directly (as we are doing) or using the microcontroller 4396 * which is also wired to I2C interface. I have no further info on the 4397 * microcontroller features, one would need to disassembly the firmware. 4398 * note: the vendor refused to give any information on this product, all 4399 * that stuff was found using a multimeter! :) 4400 */ 4401 static void rv605_muxsel(struct bttv *btv, unsigned int input) 4402 { 4403 static const u8 muxgpio[] = { 0x3, 0x1, 0x2, 0x4, 0xf, 0x7, 0xe, 0x0, 4404 0xd, 0xb, 0xc, 0x6, 0x9, 0x5, 0x8, 0xa }; 4405 4406 gpio_bits(0x07f, muxgpio[input]); 4407 4408 /* reset all conections */ 4409 gpio_bits(0x200,0x200); 4410 mdelay(1); 4411 gpio_bits(0x200,0x000); 4412 mdelay(1); 4413 4414 /* create a new connection */ 4415 gpio_bits(0x480,0x480); 4416 mdelay(1); 4417 gpio_bits(0x480,0x080); 4418 mdelay(1); 4419 } 4420 4421 /* Tibet Systems 'Progress DVR' CS16 muxsel helper [Chris Fanning] 4422 * 4423 * The CS16 (available on eBay cheap) is a PCI board with four Fusion 4424 * 878A chips, a PCI bridge, an Atmel microcontroller, four sync separator 4425 * chips, ten eight input analog multiplexors, a not chip and a few 4426 * other components. 4427 * 4428 * 16 inputs on a secondary bracket are provided and can be selected 4429 * from each of the four capture chips. Two of the eight input 4430 * multiplexors are used to select from any of the 16 input signals. 4431 * 4432 * Unsupported hardware capabilities: 4433 * . A video output monitor on the secondary bracket can be selected from 4434 * one of the 878A chips. 4435 * . Another passthrough but I haven't spent any time investigating it. 4436 * . Digital I/O (logic level connected to GPIO) is available from an 4437 * onboard header. 4438 * 4439 * The on chip input mux should always be set to 2. 4440 * GPIO[16:19] - Video input selection 4441 * GPIO[0:3] - Video output monitor select (only available from one 878A) 4442 * GPIO[?:?] - Digital I/O. 4443 * 4444 * There is an ATMEL microcontroller with an 8031 core on board. I have not 4445 * determined what function (if any) it provides. With the microcontroller 4446 * and sync separator chips a guess is that it might have to do with video 4447 * switching and maybe some digital I/O. 4448 */ 4449 static void tibetCS16_muxsel(struct bttv *btv, unsigned int input) 4450 { 4451 /* video mux */ 4452 gpio_bits(0x0f0000, input << 16); 4453 } 4454 4455 static void tibetCS16_init(struct bttv *btv) 4456 { 4457 /* enable gpio bits, mask obtained via btSpy */ 4458 gpio_inout(0xffffff, 0x0f7fff); 4459 gpio_write(0x0f7fff); 4460 } 4461 4462 /* 4463 * The following routines for the Kodicom-4400r get a little mind-twisting. 4464 * There is a "master" controller and three "slave" controllers, together 4465 * an analog switch which connects any of 16 cameras to any of the BT87A's. 4466 * The analog switch is controlled by the "master", but the detection order 4467 * of the four BT878A chips is in an order which I just don't understand. 4468 * The "master" is actually the second controller to be detected. The 4469 * logic on the board uses logical numbers for the 4 controllers, but 4470 * those numbers are different from the detection sequence. When working 4471 * with the analog switch, we need to "map" from the detection sequence 4472 * over to the board's logical controller number. This mapping sequence 4473 * is {3, 0, 2, 1}, i.e. the first controller to be detected is logical 4474 * unit 3, the second (which is the master) is logical unit 0, etc. 4475 * We need to maintain the status of the analog switch (which of the 16 4476 * cameras is connected to which of the 4 controllers) in sw_status array. 4477 */ 4478 4479 /* 4480 * First a routine to set the analog switch, which controls which camera 4481 * is routed to which controller. The switch comprises an X-address 4482 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a 4483 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3). 4484 * A data value (gpio bit 7) of '1' enables the switch, and '0' disables 4485 * the switch. A STROBE bit (gpio bit 8) latches the data value into the 4486 * specified address. The idea is to set the address and data, then bring 4487 * STROBE high, and finally bring STROBE back to low. 4488 */ 4489 static void kodicom4400r_write(struct bttv *btv, 4490 unsigned char xaddr, 4491 unsigned char yaddr, 4492 unsigned char data) { 4493 unsigned int udata; 4494 4495 udata = (data << 7) | ((yaddr&3) << 4) | (xaddr&0xf); 4496 gpio_bits(0x1ff, udata); /* write ADDR and DAT */ 4497 gpio_bits(0x1ff, udata | (1 << 8)); /* strobe high */ 4498 gpio_bits(0x1ff, udata); /* strobe low */ 4499 } 4500 4501 /* 4502 * Next the mux select. Both the "master" and "slave" 'cards' (controllers) 4503 * use this routine. The routine finds the "master" for the card, maps 4504 * the controller number from the detected position over to the logical 4505 * number, writes the appropriate data to the analog switch, and housekeeps 4506 * the local copy of the switch information. The parameter 'input' is the 4507 * requested camera number (0 - 15). 4508 */ 4509 static void kodicom4400r_muxsel(struct bttv *btv, unsigned int input) 4510 { 4511 int xaddr, yaddr; 4512 struct bttv *mctlr; 4513 static unsigned char map[4] = {3, 0, 2, 1}; 4514 4515 mctlr = master[btv->c.nr]; 4516 if (mctlr == NULL) { /* ignore if master not yet detected */ 4517 return; 4518 } 4519 yaddr = (btv->c.nr - mctlr->c.nr + 1) & 3; /* the '&' is for safety */ 4520 yaddr = map[yaddr]; 4521 xaddr = input & 0xf; 4522 /* Check if the controller/camera pair has changed, else ignore */ 4523 if (mctlr->sw_status[yaddr] != xaddr) 4524 { 4525 /* "open" the old switch, "close" the new one, save the new */ 4526 kodicom4400r_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0); 4527 mctlr->sw_status[yaddr] = xaddr; 4528 kodicom4400r_write(mctlr, xaddr, yaddr, 1); 4529 } 4530 } 4531 4532 /* 4533 * During initialisation, we need to reset the analog switch. We 4534 * also preset the switch to map the 4 connectors on the card to the 4535 * *user's* (see above description of kodicom4400r_muxsel) channels 4536 * 0 through 3 4537 */ 4538 static void kodicom4400r_init(struct bttv *btv) 4539 { 4540 int ix; 4541 4542 gpio_inout(0x0003ff, 0x0003ff); 4543 gpio_write(1 << 9); /* reset MUX */ 4544 gpio_write(0); 4545 /* Preset camera 0 to the 4 controllers */ 4546 for (ix = 0; ix < 4; ix++) { 4547 btv->sw_status[ix] = ix; 4548 kodicom4400r_write(btv, ix, ix, 1); 4549 } 4550 /* 4551 * Since this is the "master", we need to set up the 4552 * other three controller chips' pointers to this structure 4553 * for later use in the muxsel routine. 4554 */ 4555 if ((btv->c.nr<1) || (btv->c.nr>BTTV_MAX-3)) 4556 return; 4557 master[btv->c.nr-1] = btv; 4558 master[btv->c.nr] = btv; 4559 master[btv->c.nr+1] = btv; 4560 master[btv->c.nr+2] = btv; 4561 } 4562 4563 /* The Grandtec X-Guard framegrabber card uses two Dual 4-channel 4564 * video multiplexers to provide up to 16 video inputs. These 4565 * multiplexers are controlled by the lower 8 GPIO pins of the 4566 * bt878. The multiplexers probably Pericom PI5V331Q or similar. 4567 4568 * xxx0 is pin xxx of multiplexer U5, 4569 * yyy1 is pin yyy of multiplexer U2 4570 */ 4571 #define ENA0 0x01 4572 #define ENB0 0x02 4573 #define ENA1 0x04 4574 #define ENB1 0x08 4575 4576 #define IN10 0x10 4577 #define IN00 0x20 4578 #define IN11 0x40 4579 #define IN01 0x80 4580 4581 static void xguard_muxsel(struct bttv *btv, unsigned int input) 4582 { 4583 static const int masks[] = { 4584 ENB0, ENB0|IN00, ENB0|IN10, ENB0|IN00|IN10, 4585 ENA0, ENA0|IN00, ENA0|IN10, ENA0|IN00|IN10, 4586 ENB1, ENB1|IN01, ENB1|IN11, ENB1|IN01|IN11, 4587 ENA1, ENA1|IN01, ENA1|IN11, ENA1|IN01|IN11, 4588 }; 4589 gpio_write(masks[input%16]); 4590 } 4591 static void picolo_tetra_init(struct bttv *btv) 4592 { 4593 /*This is the video input redirection fonctionality : I DID NOT USED IT. */ 4594 btwrite (0x08<<16,BT848_GPIO_DATA);/*GPIO[19] [==> 4053 B+C] set to 1 */ 4595 btwrite (0x04<<16,BT848_GPIO_DATA);/*GPIO[18] [==> 4053 A] set to 1*/ 4596 } 4597 static void picolo_tetra_muxsel (struct bttv* btv, unsigned int input) 4598 { 4599 4600 dprintk("%d : picolo_tetra_muxsel => input = %d\n", btv->c.nr, input); 4601 /*Just set the right path in the analog multiplexers : channel 1 -> 4 ==> Analog Mux ==> MUX0*/ 4602 /*GPIO[20]&GPIO[21] used to choose the right input*/ 4603 btwrite (input<<20,BT848_GPIO_DATA); 4604 4605 } 4606 4607 /* 4608 * ivc120_muxsel [Added by Alan Garfield <alan@fromorbit.com>] 4609 * 4610 * The IVC120G security card has 4 i2c controlled TDA8540 matrix 4611 * swichers to provide 16 channels to MUX0. The TDA8540's have 4612 * 4 independent outputs and as such the IVC120G also has the 4613 * optional "Monitor Out" bus. This allows the card to be looking 4614 * at one input while the monitor is looking at another. 4615 * 4616 * Since I've couldn't be bothered figuring out how to add an 4617 * independent muxsel for the monitor bus, I've just set it to 4618 * whatever the card is looking at. 4619 * 4620 * OUT0 of the TDA8540's is connected to MUX0 (0x03) 4621 * OUT1 of the TDA8540's is connected to "Monitor Out" (0x0C) 4622 * 4623 * TDA8540_ALT3 IN0-3 = Channel 13 - 16 (0x03) 4624 * TDA8540_ALT4 IN0-3 = Channel 1 - 4 (0x03) 4625 * TDA8540_ALT5 IN0-3 = Channel 5 - 8 (0x03) 4626 * TDA8540_ALT6 IN0-3 = Channel 9 - 12 (0x03) 4627 * 4628 */ 4629 4630 /* All 7 possible sub-ids for the TDA8540 Matrix Switcher */ 4631 #define I2C_TDA8540 0x90 4632 #define I2C_TDA8540_ALT1 0x92 4633 #define I2C_TDA8540_ALT2 0x94 4634 #define I2C_TDA8540_ALT3 0x96 4635 #define I2C_TDA8540_ALT4 0x98 4636 #define I2C_TDA8540_ALT5 0x9a 4637 #define I2C_TDA8540_ALT6 0x9c 4638 4639 static void ivc120_muxsel(struct bttv *btv, unsigned int input) 4640 { 4641 /* Simple maths */ 4642 int key = input % 4; 4643 int matrix = input / 4; 4644 4645 dprintk("%d: ivc120_muxsel: Input - %02d | TDA - %02d | In - %02d\n", 4646 btv->c.nr, input, matrix, key); 4647 4648 /* Handles the input selection on the TDA8540's */ 4649 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x00, 4650 ((matrix == 3) ? (key | key << 2) : 0x00), 1); 4651 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x00, 4652 ((matrix == 0) ? (key | key << 2) : 0x00), 1); 4653 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x00, 4654 ((matrix == 1) ? (key | key << 2) : 0x00), 1); 4655 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x00, 4656 ((matrix == 2) ? (key | key << 2) : 0x00), 1); 4657 4658 /* Handles the output enables on the TDA8540's */ 4659 bttv_I2CWrite(btv, I2C_TDA8540_ALT3, 0x02, 4660 ((matrix == 3) ? 0x03 : 0x00), 1); /* 13 - 16 */ 4661 bttv_I2CWrite(btv, I2C_TDA8540_ALT4, 0x02, 4662 ((matrix == 0) ? 0x03 : 0x00), 1); /* 1-4 */ 4663 bttv_I2CWrite(btv, I2C_TDA8540_ALT5, 0x02, 4664 ((matrix == 1) ? 0x03 : 0x00), 1); /* 5-8 */ 4665 bttv_I2CWrite(btv, I2C_TDA8540_ALT6, 0x02, 4666 ((matrix == 2) ? 0x03 : 0x00), 1); /* 9-12 */ 4667 4668 /* 878's MUX0 is already selected for input via muxsel values */ 4669 } 4670 4671 4672 /* PXC200 muxsel helper 4673 * luke@syseng.anu.edu.au 4674 * another transplant 4675 * from Alessandro Rubini (rubini@linux.it) 4676 * 4677 * There are 4 kinds of cards: 4678 * PXC200L which is bt848 4679 * PXC200F which is bt848 with PIC controlling mux 4680 * PXC200AL which is bt878 4681 * PXC200AF which is bt878 with PIC controlling mux 4682 */ 4683 #define PX_CFG_PXC200F 0x01 4684 #define PX_FLAG_PXC200A 0x00001000 /* a pxc200A is bt-878 based */ 4685 #define PX_I2C_PIC 0x0f 4686 #define PX_PXC200A_CARDID 0x200a1295 4687 #define PX_I2C_CMD_CFG 0x00 4688 4689 static void PXC200_muxsel(struct bttv *btv, unsigned int input) 4690 { 4691 int rc; 4692 long mux; 4693 int bitmask; 4694 unsigned char buf[2]; 4695 4696 /* Read PIC config to determine if this is a PXC200F */ 4697 /* PX_I2C_CMD_CFG*/ 4698 buf[0]=0; 4699 buf[1]=0; 4700 rc=bttv_I2CWrite(btv,(PX_I2C_PIC<<1),buf[0],buf[1],1); 4701 if (rc) { 4702 pr_debug("%d: PXC200_muxsel: pic cfg write failed:%d\n", 4703 btv->c.nr, rc); 4704 /* not PXC ? do nothing */ 4705 return; 4706 } 4707 4708 rc=bttv_I2CRead(btv,(PX_I2C_PIC<<1),NULL); 4709 if (!(rc & PX_CFG_PXC200F)) { 4710 pr_debug("%d: PXC200_muxsel: not PXC200F rc:%d\n", 4711 btv->c.nr, rc); 4712 return; 4713 } 4714 4715 4716 /* The multiplexer in the 200F is handled by the GPIO port */ 4717 /* get correct mapping between inputs */ 4718 /* mux = bttv_tvcards[btv->type].muxsel[input] & 3; */ 4719 /* ** not needed!? */ 4720 mux = input; 4721 4722 /* make sure output pins are enabled */ 4723 /* bitmask=0x30f; */ 4724 bitmask=0x302; 4725 /* check whether we have a PXC200A */ 4726 if (btv->cardid == PX_PXC200A_CARDID) { 4727 bitmask ^= 0x180; /* use 7 and 9, not 8 and 9 */ 4728 bitmask |= 7<<4; /* the DAC */ 4729 } 4730 btwrite(bitmask, BT848_GPIO_OUT_EN); 4731 4732 bitmask = btread(BT848_GPIO_DATA); 4733 if (btv->cardid == PX_PXC200A_CARDID) 4734 bitmask = (bitmask & ~0x280) | ((mux & 2) << 8) | ((mux & 1) << 7); 4735 else /* older device */ 4736 bitmask = (bitmask & ~0x300) | ((mux & 3) << 8); 4737 btwrite(bitmask,BT848_GPIO_DATA); 4738 4739 /* 4740 * Was "to be safe, set the bt848 to input 0" 4741 * Actually, since it's ok at load time, better not messing 4742 * with these bits (on PXC200AF you need to set mux 2 here) 4743 * 4744 * needed because bttv-driver sets mux before calling this function 4745 */ 4746 if (btv->cardid == PX_PXC200A_CARDID) 4747 btaor(2<<5, ~BT848_IFORM_MUXSEL, BT848_IFORM); 4748 else /* older device */ 4749 btand(~BT848_IFORM_MUXSEL,BT848_IFORM); 4750 4751 pr_debug("%d: setting input channel to:%d\n", btv->c.nr, (int)mux); 4752 } 4753 4754 static void phytec_muxsel(struct bttv *btv, unsigned int input) 4755 { 4756 unsigned int mux = input % 4; 4757 4758 if (input == btv->svhs) 4759 mux = 0; 4760 4761 gpio_bits(0x3, mux); 4762 } 4763 4764 /* 4765 * GeoVision GV-800(S) functions 4766 * Bruno Christo <bchristo@inf.ufsm.br> 4767 */ 4768 4769 /* This is a function to control the analog switch, which determines which 4770 * camera is routed to which controller. The switch comprises an X-address 4771 * (gpio bits 0-3, representing the camera, ranging from 0-15), and a 4772 * Y-address (gpio bits 4-6, representing the controller, ranging from 0-3). 4773 * A data value (gpio bit 18) of '1' enables the switch, and '0' disables 4774 * the switch. A STROBE bit (gpio bit 17) latches the data value into the 4775 * specified address. There is also a chip select (gpio bit 16). 4776 * The idea is to set the address and chip select together, bring 4777 * STROBE high, write the data, and finally bring STROBE back to low. 4778 */ 4779 static void gv800s_write(struct bttv *btv, 4780 unsigned char xaddr, 4781 unsigned char yaddr, 4782 unsigned char data) { 4783 /* On the "master" 878A: 4784 * GPIO bits 0-9 are used for the analog switch: 4785 * 00 - 03: camera selector 4786 * 04 - 06: 878A (controller) selector 4787 * 16: cselect 4788 * 17: strobe 4789 * 18: data (1->on, 0->off) 4790 * 19: reset 4791 */ 4792 const u32 ADDRESS = ((xaddr&0xf) | (yaddr&3)<<4); 4793 const u32 CSELECT = 1<<16; 4794 const u32 STROBE = 1<<17; 4795 const u32 DATA = data<<18; 4796 4797 gpio_bits(0x1007f, ADDRESS | CSELECT); /* write ADDRESS and CSELECT */ 4798 gpio_bits(0x20000, STROBE); /* STROBE high */ 4799 gpio_bits(0x40000, DATA); /* write DATA */ 4800 gpio_bits(0x20000, ~STROBE); /* STROBE low */ 4801 } 4802 4803 /* 4804 * GeoVision GV-800(S) muxsel 4805 * 4806 * Each of the 4 cards (controllers) use this function. 4807 * The controller using this function selects the input through the GPIO pins 4808 * of the "master" card. A pointer to this card is stored in master[btv->c.nr]. 4809 * 4810 * The parameter 'input' is the requested camera number (0-4) on the controller. 4811 * The map array has the address of each input. Note that the addresses in the 4812 * array are in the sequence the original GeoVision driver uses, that is, set 4813 * every controller to input 0, then to input 1, 2, 3, repeat. This means that 4814 * the physical "camera 1" connector corresponds to controller 0 input 0, 4815 * "camera 2" corresponds to controller 1 input 0, and so on. 4816 * 4817 * After getting the input address, the function then writes the appropriate 4818 * data to the analog switch, and housekeeps the local copy of the switch 4819 * information. 4820 */ 4821 static void gv800s_muxsel(struct bttv *btv, unsigned int input) 4822 { 4823 struct bttv *mctlr; 4824 int xaddr, yaddr; 4825 static unsigned int map[4][4] = { { 0x0, 0x4, 0xa, 0x6 }, 4826 { 0x1, 0x5, 0xb, 0x7 }, 4827 { 0x2, 0x8, 0xc, 0xe }, 4828 { 0x3, 0x9, 0xd, 0xf } }; 4829 input = input%4; 4830 mctlr = master[btv->c.nr]; 4831 if (mctlr == NULL) { 4832 /* do nothing until the "master" is detected */ 4833 return; 4834 } 4835 yaddr = (btv->c.nr - mctlr->c.nr) & 3; 4836 xaddr = map[yaddr][input] & 0xf; 4837 4838 /* Check if the controller/camera pair has changed, ignore otherwise */ 4839 if (mctlr->sw_status[yaddr] != xaddr) { 4840 /* disable the old switch, enable the new one and save status */ 4841 gv800s_write(mctlr, mctlr->sw_status[yaddr], yaddr, 0); 4842 mctlr->sw_status[yaddr] = xaddr; 4843 gv800s_write(mctlr, xaddr, yaddr, 1); 4844 } 4845 } 4846 4847 /* GeoVision GV-800(S) "master" chip init */ 4848 static void gv800s_init(struct bttv *btv) 4849 { 4850 int ix; 4851 4852 gpio_inout(0xf107f, 0xf107f); 4853 gpio_write(1<<19); /* reset the analog MUX */ 4854 gpio_write(0); 4855 4856 /* Preset camera 0 to the 4 controllers */ 4857 for (ix = 0; ix < 4; ix++) { 4858 btv->sw_status[ix] = ix; 4859 gv800s_write(btv, ix, ix, 1); 4860 } 4861 4862 /* Inputs on the "master" controller need this brightness fix */ 4863 bttv_I2CWrite(btv, 0x18, 0x5, 0x90, 1); 4864 4865 if (btv->c.nr > BTTV_MAX-4) 4866 return; 4867 /* 4868 * Store the "master" controller pointer in the master 4869 * array for later use in the muxsel function. 4870 */ 4871 master[btv->c.nr] = btv; 4872 master[btv->c.nr+1] = btv; 4873 master[btv->c.nr+2] = btv; 4874 master[btv->c.nr+3] = btv; 4875 } 4876 4877 /* ----------------------------------------------------------------------- */ 4878 /* motherboard chipset specific stuff */ 4879 4880 void __init bttv_check_chipset(void) 4881 { 4882 int pcipci_fail = 0; 4883 struct pci_dev *dev = NULL; 4884 4885 if (pci_pci_problems & (PCIPCI_FAIL|PCIAGP_FAIL)) /* should check if target is AGP */ 4886 pcipci_fail = 1; 4887 if (pci_pci_problems & (PCIPCI_TRITON|PCIPCI_NATOMA|PCIPCI_VIAETBF)) 4888 triton1 = 1; 4889 if (pci_pci_problems & PCIPCI_VSFX) 4890 vsfx = 1; 4891 #ifdef PCIPCI_ALIMAGIK 4892 if (pci_pci_problems & PCIPCI_ALIMAGIK) 4893 latency = 0x0A; 4894 #endif 4895 4896 4897 /* print warnings about any quirks found */ 4898 if (triton1) 4899 pr_info("Host bridge needs ETBF enabled\n"); 4900 if (vsfx) 4901 pr_info("Host bridge needs VSFX enabled\n"); 4902 if (pcipci_fail) { 4903 pr_info("bttv and your chipset may not work together\n"); 4904 if (!no_overlay) { 4905 pr_info("overlay will be disabled\n"); 4906 no_overlay = 1; 4907 } else { 4908 pr_info("overlay forced. Use this option at your own risk.\n"); 4909 } 4910 } 4911 if (UNSET != latency) 4912 pr_info("pci latency fixup [%d]\n", latency); 4913 while ((dev = pci_get_device(PCI_VENDOR_ID_INTEL, 4914 PCI_DEVICE_ID_INTEL_82441, dev))) { 4915 unsigned char b; 4916 pci_read_config_byte(dev, 0x53, &b); 4917 if (bttv_debug) 4918 pr_info("Host bridge: 82441FX Natoma, bufcon=0x%02x\n", 4919 b); 4920 } 4921 } 4922 4923 int bttv_handle_chipset(struct bttv *btv) 4924 { 4925 unsigned char command; 4926 4927 if (!triton1 && !vsfx && UNSET == latency) 4928 return 0; 4929 4930 if (bttv_verbose) { 4931 if (triton1) 4932 pr_info("%d: enabling ETBF (430FX/VP3 compatibility)\n", 4933 btv->c.nr); 4934 if (vsfx && btv->id >= 878) 4935 pr_info("%d: enabling VSFX\n", btv->c.nr); 4936 if (UNSET != latency) 4937 pr_info("%d: setting pci timer to %d\n", 4938 btv->c.nr, latency); 4939 } 4940 4941 if (btv->id < 878) { 4942 /* bt848 (mis)uses a bit in the irq mask for etbf */ 4943 if (triton1) 4944 btv->triton1 = BT848_INT_ETBF; 4945 } else { 4946 /* bt878 has a bit in the pci config space for it */ 4947 pci_read_config_byte(btv->c.pci, BT878_DEVCTRL, &command); 4948 if (triton1) 4949 command |= BT878_EN_TBFX; 4950 if (vsfx) 4951 command |= BT878_EN_VSFX; 4952 pci_write_config_byte(btv->c.pci, BT878_DEVCTRL, command); 4953 } 4954 if (UNSET != latency) 4955 pci_write_config_byte(btv->c.pci, PCI_LATENCY_TIMER, latency); 4956 return 0; 4957 } 4958